diff options
Diffstat (limited to 'target/linux/ramips/dts/E1700.dts')
-rw-r--r-- | target/linux/ramips/dts/E1700.dts | 148 |
1 files changed, 148 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/E1700.dts b/target/linux/ramips/dts/E1700.dts new file mode 100644 index 0000000..8fdb611 --- /dev/null +++ b/target/linux/ramips/dts/E1700.dts @@ -0,0 +1,148 @@ +/* + * Device Tree file for the Linksys E1700 + * + * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/include/ "mt7620a.dtsi" + +/ { + compatible = "linksys,e1700", "ralink,mt7620a-soc"; + model = "Linksys E1700"; + + palmbus@10000000 { + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l6405d"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l6405d"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "config"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf"; + ralink,function = "gpio"; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + + mtd-mac-address = <&factory 0x28>; + + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; + + ralink,port-map = "llllw"; + + port@5 { + status = "okay"; + ralink,fixed-link = <1000 1 1 1>; + phy-mode = "rgmii"; + }; + + mdio-bus { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + phy-mode = "rgmii"; + }; + phy1: ethernet-phy@1 { + reg = <1>; + phy-mode = "rgmii"; + }; + phy2: ethernet-phy@2 { + reg = <2>; + phy-mode = "rgmii"; + }; + phy3: ethernet-phy@3 { + reg = <3>; + phy-mode = "rgmii"; + }; + phy4: ethernet-phy@4 { + reg = <4>; + phy-mode = "rgmii"; + }; + phy1f: ethernet-phy@1f { + reg = <0x1f>; + phy-mode = "rgmii"; + }; + }; + }; + + gsw@10110000 { + ralink,port4 = "gmac"; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 1 0>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 2 0>; + linux,code = <0x211>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "linksys:green:power"; + gpios = <&gpio0 10 1>; + }; + wan { + label = "linksys:green:wps"; + gpios = <&gpio0 12 1>; + }; + }; +}; |