diff options
Diffstat (limited to 'target/linux/ramips/dts/HPM.dts')
-rw-r--r-- | target/linux/ramips/dts/HPM.dts | 142 |
1 files changed, 70 insertions, 72 deletions
diff --git a/target/linux/ramips/dts/HPM.dts b/target/linux/ramips/dts/HPM.dts index d0ff882..000750f 100644 --- a/target/linux/ramips/dts/HPM.dts +++ b/target/linux/ramips/dts/HPM.dts @@ -10,78 +10,6 @@ bootargs = "console=ttyS0,115200"; }; - palmbus@10000000 { - spi@b00 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - spi-max-frequency = <25000000>; - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x0 0x0030000>; - label = "u-boot"; - read-only; - }; - - partition@30000 { - reg = <0x00030000 0x00010000>; - label = "config"; - read-only; - }; - - factory: partition@40000 { - reg = <0x00040000 0x00010000>; - label = "factory"; - read-only; - }; - - partition@50000 { - reg = <0x00050000 0x00fb0000>; - label = "firmware"; - }; - }; - }; - }; - - pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "jtag", "uartf"; - ralink,function = "gpio"; - }; - }; - }; - - ethernet@10100000 { - phy-handle = <&phy0>; - phy-mode = "rgmii"; - mtd-mac-address = <&factory 0x28>; - - mdio-bus { - status = "okay"; - - phy0: ethernet-phy@4 { - reg = <4>; - }; - }; - }; - - wmac@10180000 { - ralink,mtd-eeprom = <&factory 0>; - }; - - ehci@101c0000 { - status = "okay"; - }; - - ohci@101c1000 { - status = "okay"; - }; - gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; @@ -147,3 +75,73 @@ }; }; }; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <25000000>; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x0030000>; + label = "u-boot"; + read-only; + }; + + partition@30000 { + reg = <0x00030000 0x00010000>; + label = "config"; + read-only; + }; + + factory: partition@40000 { + reg = <0x00040000 0x00010000>; + label = "factory"; + read-only; + }; + + partition@50000 { + reg = <0x00050000 0x00fb0000>; + label = "firmware"; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "uartf"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + phy-handle = <&phy0>; + phy-mode = "rgmii"; + mtd-mac-address = <&factory 0x28>; + + mdio-bus { + status = "okay"; + + phy0: ethernet-phy@4 { + reg = <4>; + }; + }; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; |