summaryrefslogtreecommitdiff
path: root/target/linux/ramips/dts/WZR-AGL300NH.dts
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ramips/dts/WZR-AGL300NH.dts')
-rw-r--r--target/linux/ramips/dts/WZR-AGL300NH.dts135
1 files changed, 135 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/WZR-AGL300NH.dts b/target/linux/ramips/dts/WZR-AGL300NH.dts
new file mode 100644
index 0000000..8e18e90
--- /dev/null
+++ b/target/linux/ramips/dts/WZR-AGL300NH.dts
@@ -0,0 +1,135 @@
+/dts-v1/;
+
+/include/ "rt2880.dtsi"
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "WZR-AGL300NH", "ralink,rt2880-soc";
+ model = "Buffalo WZR-AGL300NH";
+
+ palmbus@300000 {
+ gpio0: gpio@600 {
+ status = "okay";
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartlite", "mdio";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+
+ bank-width = <2>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+
+ ethernet@400000 {
+ status = "okay";
+ mtd-mac-address = <&factory 0x4>;
+
+ port@0 {
+ ralink,fixed-link = <1000 1 1 1>;
+ };
+
+ mdio-bus {
+ status = "okay";
+ phy0: ethernet-phy@0 {
+ phy-mode = "mii";
+ reg = <0>;
+ };
+ };
+ };
+
+ rtl8366s {
+ compatible = "realtek,rtl8366s";
+ gpio-sda = <&gpio0 1 0>;
+ gpio-sck = <&gpio0 2 0>;
+ };
+
+ wmac@480000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 1>;
+ linux,code = <0x211>;
+ };
+ router {
+ label = "router_switch";
+ gpios = <&gpio0 7 0>;
+ linux,code = <0x100>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&gpio0 9 1>;
+ linux,code = <0x198>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ router {
+ label = "buffalo:green:router";
+ gpios = <&gpio0 8 1>;
+ };
+ diag {
+ label = "buffalo:red:diag";
+ gpios = <&gpio0 12 1>;
+ };
+ security_g {
+ label = "buffalo:orange:security_g";
+ gpios = <&gpio0 11 1>;
+ };
+ security_n {
+ label = "buffalo:orange:security_n";
+ gpios = <&gpio0 13 1>;
+ };
+ };
+
+
+ pcibus0: pci@00440000 {
+ compatible = "ralink,rt288x-pci";
+ reg = <0x00440000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ status = "ok";
+ };
+};