diff options
Diffstat (limited to 'target/linux/ramips/dts')
| -rw-r--r-- | target/linux/ramips/dts/F5D8235_V1.dts | 99 | ||||
| -rw-r--r-- | target/linux/ramips/dts/V11STFE.dts | 93 | ||||
| -rw-r--r-- | target/linux/ramips/dts/WLI-TX4-AG300N.dts | 101 |
3 files changed, 293 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/F5D8235_V1.dts b/target/linux/ramips/dts/F5D8235_V1.dts new file mode 100644 index 0000000..41a7f12 --- /dev/null +++ b/target/linux/ramips/dts/F5D8235_V1.dts @@ -0,0 +1,99 @@ +/dts-v1/; + +/include/ "rt2880.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "F5D8235_V1", "ralink,rt2880-soc"; + model = "Belkin F5D8235 v1"; + + palmbus@300000 { + sysc@0 { + ralink,pinmux = "uartlite"; + ralink,gpiomux = "i2c"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x30000>; + read-only; + }; + partition@30000 { + label = "uboot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + partition@40000 { + label = "calibration"; + reg = <0x40000 0x10000>; + read-only; + }; + partition@50000 { + label = "linux"; + reg = <0x50000 0x3b0000>; + }; + }; + + ethernet@400000 { + status = "okay"; + + ralink,fixed-link = <1000 1 1 1>; + }; + + wmac@480000 { + status = "okay"; + }; + + rtl8367s { + compatible = "realtek,rtl8367s"; + gpio-sda = <&gpio0 1 0>; + gpio-sck = <&gpio0 2 0>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + reset { + label = "reset"; + gpios = <&gpio0 9 1>; + linux,code = <0x198>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + storage { + label = "f5d8235-v1:blue:storage"; + gpios = <&gpio0 7 1>; + }; + storage2 { + label = "f5d8235-v1:orange:storage"; + gpios = <&gpio0 8 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/V11STFE.dts b/target/linux/ramips/dts/V11STFE.dts new file mode 100644 index 0000000..20cbaea --- /dev/null +++ b/target/linux/ramips/dts/V11STFE.dts @@ -0,0 +1,93 @@ +/dts-v1/; + +/include/ "rt2880.dtsi" + +/ { + compatible = "V11ST-FE", "ralink,rt2880-soc"; + model = "Ralink V11ST-FE"; + + palmbus@300000 { + sysc@0 { + ralink,pinmux = "uartlite"; + ralink,gpiomux = "i2c", "jtag"; + ralink,uartmux = "gpio"; + ralink,pcimux = "pci-fnc"; + ralink,wdtmux = <0>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + ethernet@400000 { + status = "okay"; + }; + + wmac@480000 { + status = "okay"; + }; + + pci@10140000 { + status = "okay"; + + host-bridge { + pci-bridge@1 { + status = "okay"; + }; + }; + }; + + nor-flash@1c000000 { + compatible = "cfi-flash"; + reg = <0x1c000000 0x800000>; + + bank-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x0030000>; + label = "u-boot"; + read-only; + }; + + partition@30000 { + reg = <0x00030000 0x00010000>; + label = "u-boot-env"; + read-only; + }; + + partition@40000 { + reg = <0x00040000 0x00010000>; + label = "factory"; + read-only; + }; + + partition@50000 { + reg = <0x00050000 0x003b0000>; + label = "firmware"; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + wps { + label = "wps"; + gpios = <&gpio0 0 0>; + linux,code = <0x211>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + status { + label = "v11st-fe:green:status"; + gpios = <&gpio0 12 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/WLI-TX4-AG300N.dts b/target/linux/ramips/dts/WLI-TX4-AG300N.dts new file mode 100644 index 0000000..ff33a8a --- /dev/null +++ b/target/linux/ramips/dts/WLI-TX4-AG300N.dts @@ -0,0 +1,101 @@ +/dts-v1/; + +/include/ "rt2880.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "WLI-TX4-AG300N", "ralink,rt2880-soc"; + model = "Buffalo WLI-TX4-AG300N"; + + palmbus@300000 { + sysc@0 { + ralink,pinmux = "uartlite"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x30000>; + read-only; + }; + partition@30000 { + label = "uboot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + partition@40000 { + label = "calibration"; + reg = <0x40000 0x10000>; + read-only; + }; + partition@50000 { + label = "linux"; + reg = <0x50000 0x3b0000>; + }; + }; + + ethernet@400000 { + status = "okay"; + + ralink,fixed-link = <100 1 1 1>; + }; + + wmac@480000 { + status = "okay"; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + bandwidth { + label = "bandwidth"; + gpios = <&gpio0 8 0>; + linux,code = <0x198>; + }; + reset { + label = "reset"; + gpios = <&gpio0 9 1>; + linux,code = <0x198>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + diag { + label = "buffalo:red:diag"; + gpios = <&gpio0 10 1>; + }; + power { + label = "buffalo:blue:power"; + gpios = <&gpio0 12 1>; + }; + security { + label = "buffalo:blue:security"; + gpios = <&gpio0 13 1>; + }; + }; +}; |