diff options
Diffstat (limited to 'target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/setup.c')
-rw-r--r-- | target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/setup.c | 88 |
1 files changed, 88 insertions, 0 deletions
diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/setup.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/setup.c new file mode 100644 index 0000000..be474b5 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/setup.c @@ -0,0 +1,88 @@ +/* + * Ralink RT288x SoC specific setup + * + * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/clk.h> + +#include <asm/mips_machine.h> +#include <asm/reboot.h> +#include <asm/time.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> +#include "common.h" + +static void rt288x_restart(char *command) +{ + rt288x_sysc_wr(RT2880_RESET_SYSTEM, SYSC_REG_RESET_CTRL); + while (1) + if (cpu_wait) + cpu_wait(); +} + +static void rt288x_halt(void) +{ + while (1) + cpu_wait(); +} + +unsigned int __cpuinit get_c0_compare_irq(void) +{ + return CP0_LEGACY_COMPARE_IRQ; +} + +void __init ramips_soc_setup(void) +{ + struct clk *clk; + + rt288x_sysc_base = ioremap_nocache(RT2880_SYSC_BASE, RT2880_SYSC_SIZE); + rt288x_memc_base = ioremap_nocache(RT2880_MEMC_BASE, RT2880_MEMC_SIZE); + + rt288x_clocks_init(); + + clk = clk_get(NULL, "cpu"); + if (IS_ERR(clk)) + panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); + + printk(KERN_INFO "%s running at %lu.%02lu MHz\n", ramips_sys_type, + clk_get_rate(clk) / 1000000, + (clk_get_rate(clk) % 1000000) * 100 / 1000000); + + _machine_restart = rt288x_restart; + _machine_halt = rt288x_halt; + pm_power_off = rt288x_halt; + + clk = clk_get(NULL, "uart"); + if (IS_ERR(clk)) + panic("unable to get UART clock, err=%ld", PTR_ERR(clk)); + + ramips_early_serial_setup(0, RT2880_UART0_BASE, clk_get_rate(clk), + RT2880_INTC_IRQ_UART0); + ramips_early_serial_setup(1, RT2880_UART1_BASE, clk_get_rate(clk), + RT2880_INTC_IRQ_UART1); +} + +void __init plat_time_init(void) +{ + struct clk *clk; + + clk = clk_get(NULL, "cpu"); + if (IS_ERR(clk)) + panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); + + mips_hpt_frequency = clk_get_rate(clk) / 2; +} |