diff options
Diffstat (limited to 'target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd.h')
-rw-r--r-- | target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd.h | 248 |
1 files changed, 248 insertions, 0 deletions
diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd.h b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd.h new file mode 100644 index 0000000..48de957 --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd.h @@ -0,0 +1,248 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.h $ + * $Revision: 1.2 $ + * $Date: 2008-11-21 05:39:15 $ + * $Change: 1103515 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ +#ifndef DWC_HOST_ONLY +#if !defined(__DWC_PCD_H__) +#define __DWC_PCD_H__ + +#include <linux/types.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/device.h> + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21) +# include <linux/usb/ch9.h> +#else +# include <linux/usb_ch9.h> +#endif + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) +#include <linux/usb/gadget.h> +#else +#include <linux/usb_gadget.h> +#endif +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> + +struct dwc_otg_device; + +#include "dwc_otg_cil.h" + +/** + * @file + * + * This file contains the structures, constants, and interfaces for + * the Perpherial Contoller Driver (PCD). + * + * The Peripheral Controller Driver (PCD) for Linux will implement the + * Gadget API, so that the existing Gadget drivers can be used. For + * the Mass Storage Function driver the File-backed USB Storage Gadget + * (FBS) driver will be used. The FBS driver supports the + * Control-Bulk (CB), Control-Bulk-Interrupt (CBI), and Bulk-Only + * transports. + * + */ + +/** Invalid DMA Address */ +#define DMA_ADDR_INVALID (~(dma_addr_t)0) +/** Maxpacket size for EP0 */ +#define MAX_EP0_SIZE 64 +/** Maxpacket size for any EP */ +#define MAX_PACKET_SIZE 1024 + +/** Max Transfer size for any EP */ +#define MAX_TRANSFER_SIZE 65535 + +/** Max DMA Descriptor count for any EP */ +#define MAX_DMA_DESC_CNT 64 + +/** + * Get the pointer to the core_if from the pcd pointer. + */ +#define GET_CORE_IF( _pcd ) (_pcd->otg_dev->core_if) + +/** + * States of EP0. + */ +typedef enum ep0_state +{ + EP0_DISCONNECT, /* no host */ + EP0_IDLE, + EP0_IN_DATA_PHASE, + EP0_OUT_DATA_PHASE, + EP0_IN_STATUS_PHASE, + EP0_OUT_STATUS_PHASE, + EP0_STALL, +} ep0state_e; + +/** Fordward declaration.*/ +struct dwc_otg_pcd; + +/** DWC_otg iso request structure. + * + */ +typedef struct usb_iso_request dwc_otg_pcd_iso_request_t; + +/** PCD EP structure. + * This structure describes an EP, there is an array of EPs in the PCD + * structure. + */ +typedef struct dwc_otg_pcd_ep +{ + /** USB EP data */ + struct usb_ep ep; + /** USB EP Descriptor */ + const struct usb_endpoint_descriptor *desc; + + /** queue of dwc_otg_pcd_requests. */ + struct list_head queue; + unsigned stopped : 1; + unsigned disabling : 1; + unsigned dma : 1; + unsigned queue_sof : 1; + +#ifdef DWC_EN_ISOC + /** DWC_otg Isochronous Transfer */ + struct usb_iso_request* iso_req; +#endif //DWC_EN_ISOC + + /** DWC_otg ep data. */ + dwc_ep_t dwc_ep; + + /** Pointer to PCD */ + struct dwc_otg_pcd *pcd; +}dwc_otg_pcd_ep_t; + + + +/** DWC_otg PCD Structure. + * This structure encapsulates the data for the dwc_otg PCD. + */ +typedef struct dwc_otg_pcd +{ + /** USB gadget */ + struct usb_gadget gadget; + /** USB gadget driver pointer*/ + struct usb_gadget_driver *driver; + /** The DWC otg device pointer. */ + struct dwc_otg_device *otg_dev; + + /** State of EP0 */ + ep0state_e ep0state; + /** EP0 Request is pending */ + unsigned ep0_pending : 1; + /** Indicates when SET CONFIGURATION Request is in process */ + unsigned request_config : 1; + /** The state of the Remote Wakeup Enable. */ + unsigned remote_wakeup_enable : 1; + /** The state of the B-Device HNP Enable. */ + unsigned b_hnp_enable : 1; + /** The state of A-Device HNP Support. */ + unsigned a_hnp_support : 1; + /** The state of the A-Device Alt HNP support. */ + unsigned a_alt_hnp_support : 1; + /** Count of pending Requests */ + unsigned request_pending; + + /** SETUP packet for EP0 + * This structure is allocated as a DMA buffer on PCD initialization + * with enough space for up to 3 setup packets. + */ + union + { + struct usb_ctrlrequest req; + uint32_t d32[2]; + } *setup_pkt; + + dma_addr_t setup_pkt_dma_handle; + + /** 2-byte dma buffer used to return status from GET_STATUS */ + uint16_t *status_buf; + dma_addr_t status_buf_dma_handle; + + /** EP0 */ + dwc_otg_pcd_ep_t ep0; + + /** Array of IN EPs. */ + dwc_otg_pcd_ep_t in_ep[ MAX_EPS_CHANNELS - 1]; + /** Array of OUT EPs. */ + dwc_otg_pcd_ep_t out_ep[ MAX_EPS_CHANNELS - 1]; + /** number of valid EPs in the above array. */ +// unsigned num_eps : 4; + spinlock_t lock; + /** Timer for SRP. If it expires before SRP is successful + * clear the SRP. */ + struct timer_list srp_timer; + + /** Tasklet to defer starting of TEST mode transmissions until + * Status Phase has been completed. + */ + struct tasklet_struct test_mode_tasklet; + + /** Tasklet to delay starting of xfer in DMA mode */ + struct tasklet_struct *start_xfer_tasklet; + + /** The test mode to enter when the tasklet is executed. */ + unsigned test_mode; + +} dwc_otg_pcd_t; + + +/** DWC_otg request structure. + * This structure is a list of requests. + */ +typedef struct +{ + struct usb_request req; /**< USB Request. */ + struct list_head queue; /**< queue of these requests. */ +} dwc_otg_pcd_request_t; + + +extern int dwc_otg_pcd_init(struct device *dev); + +//extern void dwc_otg_pcd_remove( struct dwc_otg_device *_otg_dev ); +extern void dwc_otg_pcd_remove( struct device *dev); +extern int32_t dwc_otg_pcd_handle_intr( dwc_otg_pcd_t *pcd ); +extern void dwc_otg_pcd_start_srp_timer(dwc_otg_pcd_t *pcd ); + +extern void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t *pcd); +extern void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t *pcd, int set); + +extern void dwc_otg_iso_buffer_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_iso_request_t *req); +extern void dwc_otg_request_done(dwc_otg_pcd_ep_t *_ep, dwc_otg_pcd_request_t *req, + int status); +extern void dwc_otg_request_nuke(dwc_otg_pcd_ep_t *_ep); +extern void dwc_otg_pcd_update_otg(dwc_otg_pcd_t *_pcd, + const unsigned reset); + +#endif +#endif /* DWC_HOST_ONLY */ |