diff options
Diffstat (limited to 'target/linux/ramips/files')
4 files changed, 81 insertions, 0 deletions
diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h index 3a750df..bc183ab 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h @@ -15,6 +15,7 @@ enum ramips_mach_type { RAMIPS_MACH_GENERIC, /* RT2880 based machines */ RAMIPS_MACH_F5D8235_V1, /* Belkin F5D8235 v1 */ + RAMIPS_MACH_BR6524N, /* Edimax BR6524N */ RAMIPS_MACH_RT_N15, /* Asus RT-N15 */ RAMIPS_MACH_V11ST_FE, /* Ralink V11ST-FE */ RAMIPS_MACH_WLI_TX4_AG300N, /* Buffalo WLI-TX4-AG300N */ diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig index 31dcc81..739561c 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig @@ -6,6 +6,11 @@ config RT288X_MACH_F5D8235_V1 bool "Belkin F5D8235 V1 board support" select RALINK_DEV_GPIO_LEDS +config RT288X_MACH_BR6524N + bool "Edimax BR6524N support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + config RT288X_MACH_RT_N15 bool "Asus RT-N15 board support" select RALINK_DEV_GPIO_BUTTONS diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile index 473f855..eb60c5d 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile +++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile @@ -14,6 +14,7 @@ obj-y := irq.o setup.o rt288x.o devices.o clock.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_RT288X_MACH_F5D8235_V1) += mach-f5d8235-v1.o +obj-$(CONFIG_RT288X_MACH_BR6524N) += mach-br6524n.o obj-$(CONFIG_RT288X_MACH_RT_N15) += mach-rt-n15.o obj-$(CONFIG_RT288X_MACH_V11ST_FE) += mach-v11st-fe.o obj-$(CONFIG_RT288X_MACH_WLI_TX4_AG300N) += mach-wli-tx4-ag300n.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-br6524n.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-br6524n.c new file mode 100644 index 0000000..ff4746c --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-br6524n.c @@ -0,0 +1,74 @@ +/* + * Edimax BR6524N board support + * + * Copyright (C) 2012 Florian Fainelli <florian@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ethtool.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +#define BR6524N_GPIO_STATUS_LED 12 +#define BR6524N_GPIO_BUTTON_WPS 0 + +#define BR6524N_KEYS_POLL_INTERVAL 20 +#define BR6524N_KEYS_DEBOUNCE_INTERVAL (3 * BR6524N_KEYS_POLL_INTERVAL) + +static struct gpio_led br6524n_leds_gpio[] __initdata = { + { + .name = "br6524n:green:status", + .gpio = BR6524N_GPIO_STATUS_LED, + .active_low = 1, + } +}; + +static struct gpio_keys_button br6524n_gpio_buttons[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = BR6524N_KEYS_DEBOUNCE_INTERVAL, + .gpio = BR6524N_GPIO_BUTTON_WPS, + } +}; + +static void __init br6524n_fe_init(void) +{ + rt288x_gpio_init(RT2880_GPIO_MODE_UART0); + + rt288x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(br6524n_leds_gpio), + br6524n_leds_gpio); + + ramips_register_gpio_buttons(-1, BR6524N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(br6524n_gpio_buttons), + br6524n_gpio_buttons); + + rt288x_register_wifi(); + + /* Board is connected to an IC+ IP175C Fast Ethernet switch */ + rt288x_eth_data.speed = SPEED_100; + rt288x_eth_data.duplex = DUPLEX_FULL; + rt288x_eth_data.tx_fc = 1; + rt288x_eth_data.rx_fc = 1; + rt288x_eth_data.phy_mask = BIT(0); + rt288x_register_ethernet(); + + rt288x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_BR6524N, "BR6524N", "Edimax BR6524N", br6524n_fe_init); |