diff options
Diffstat (limited to 'target/linux/ramips/image/Makefile')
| -rw-r--r-- | target/linux/ramips/image/Makefile | 58 |
1 files changed, 29 insertions, 29 deletions
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 9bac08b..eea6fe8 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -83,18 +83,18 @@ define Image/BuildKernel endef define BuildFirmware/Generic - $(call MkImageLzma,$(2),$(3) $($(4))) - $(call Sysupgrade/KRuImage,$(1),$(2),$(5),$(6)) + $(call MkImageLzma,$(2),$(3)) + $(call Sysupgrade/KRuImage,$(1),$(2),$(4),$(5)) endef define BuildFirmware/Generic/initramfs - $(call MkImageLzma,$(2),$(3) $($(4))) + $(call MkImageLzma,$(2),$(3)) $(CP) $(KDIR)/vmlinux-$(2).uImage $(call imgname,$(1),$(2))-uImage.bin endef define BuildFirmware/WL341V3 - $(call MkImageLzma,$(2),$(3) $($(4))) - $(call Sysupgrade/KRuImage,$(1),$(2),$(5),$(6)) + $(call MkImageLzma,$(2),$(3)) + $(call Sysupgrade/KRuImage,$(1),$(2),$(4),$(5)) if [ -e "$(call sysupname,$(1),$(2))" ]; then \ ( \ dd if=/dev/zero bs=195936 count=1; \ @@ -102,17 +102,17 @@ define BuildFirmware/WL341V3 dd if=/dev/zero bs=581 count=1; \ echo -n -e "\x73\x45\x72\x43\x6F\x4D\x6D\x00\x01\x00\x00\x59\x4E\x37\x95\x58\x10\x00\x20\x00\x28\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x11\x03\x00\x00\x80\x00\x00\x00\x00\x03\x00\x00\x10\x12\x00\x00\x00\x10\x73\x45\x72\x43\x6F\x4D\x6D"; \ dd if=/dev/zero bs=65552 count=1; \ - dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(5) conv=sync; \ + dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(4) conv=sync; \ dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \ - dd if=/dev/zero bs=`expr 4194304 - 262144 - 16 - $(5) - \( \( \( \`stat -c%s $(KDIR)/root.$(1)\` / 65536 \) + 1 \) \* 65536 \)` count=1; \ + dd if=/dev/zero bs=`expr 4194304 - 262144 - 16 - $(4) - \( \( \( \`stat -c%s $(KDIR)/root.$(1)\` / 65536 \) + 1 \) \* 65536 \)` count=1; \ echo -n -e "\x11\x03\x80\x00\x10\x12\x90\xF7\x65\x52\x63\x4F\x6D\x4D\x00\x00"; \ ) > $(call imgname,$(1),$(2))-factory.bin; \ fi endef define BuildFirmware/Buffalo - $(call MkImageLzma,$(2),$(3) $($(4))) - $(call Sysupgrade/KRuImage,$(1),$(2),$(5),$(6)) + $(call MkImageLzma,$(2),$(3)) + $(call Sysupgrade/KRuImage,$(1),$(2),$(4),$(5)) if [ -e "$(call sysupname,$(1),$(2))" ]; then \ buffalo-enc -p $(3) -v 1.76 \ -i $(KDIR)/vmlinux-$(2).uImage \ @@ -129,22 +129,22 @@ define BuildFirmware/Buffalo endef define BuildFirmware/Buffalo2 - $(call BuildFirmware/Generic,$(1),$(2),board=$(3),$($(4)),$(5),$(6)) + $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(4),$(5),$(6)) endef define BuildFirmware/NW718 - $(call PatchKernelLzma,$(2),$(3) $($(4))) + $(call PatchKernelLzma,$(2),$(3)) mkimage -A mips -O linux -T kernel -C lzma $(call kernel_entry) \ -n "ARA1B4NCRNW718;1" \ -d "$(KDIR)/vmlinux-$(2).bin.lzma" \ "$(KDIR)/vmlinux-$(2).uImage" - if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \ + if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(4) ]; then \ echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \ - else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \ + else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(5) ]; then \ echo "Warning: $(KDIR)/root.$(1) is too big"; \ else \ ( \ - dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(5) conv=sync; \ + dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(4) conv=sync; \ dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \ ) > $(call imgname,$(1),$(2))-factory.bin; \ fi; fi @@ -166,29 +166,29 @@ endef mtdlayout_4M=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware) define Image/Build/Template/GENERIC_4M - $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)),mtdlayout_4M,851968,3014656) + $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(mtdlayout_4M),851968,3014656) endef define Image/Build/Template/GENERIC_4M/initramfs - $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)),mtdlayout_4M) + $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(mtdlayout_4M)) endef mtdlayout_8M=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) kernel_size_8M=917504 rootfs_size_8M=7143424 define Image/Build/Template/GENERIC_8M - $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)),mtdlayout_8M,$(kernel_size_8M),$(rootfs_size_8M)) + $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(mtdlayout_8M),$(kernel_size_8M),$(rootfs_size_8M)) endef define Image/Build/Template/GENERIC_8M/initramfs - $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)),mtdlayout_8M) + $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(mtdlayout_8M)) endef mtdlayout_dir300b1=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware) mtd_dir300b1_kernel_part_size=917504 mtd_dir300b1_rootfs_part_size=2949120 define Image/Build/Template/DIR300B1 - $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_dir300b1,$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size)) + $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(mtdlayout_dir300b1),$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size)) mkwrgimg -s $(4) -d /dev/mtdblock/2 \ -i $(call sysupname,$(1),$(2)) \ -o $(call imgname,$(1),$(2))-factory.bin @@ -196,8 +196,8 @@ endef mtdlayout_nw718=mtdparts=spi0.0:192k(u-boot)ro,128k(config)ro,64k(factory)ro,832k(kernel),2880k(rootfs),3712k@0x60000(firmware) define Image/Build/Template/NW718 - $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_nw718,851968,2949120) - $(call BuildFirmware/NW718,$(1),$(2),board=$(3),mtdlayout_nw718,851968,2949120) + $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(mtdlayout_nw718),851968,2949120) + $(call BuildFirmware/NW718,$(1),$(2),board=$(3) $(mtdlayout_nw718),851968,2949120) endef define Image/Build/Profile/WR6202 @@ -206,8 +206,8 @@ endef mtdlayout_sercomm_4M=mtdparts=physmap-flash.0:128k(u-boot)ro,64k(board-nvram)ro,64k(u-boot-env)ro,832k(kernel),2944k(rootfs),64k(signature-eRcOmM),3776k@0x40000(firmware),4096k@0x0(fullflash) define Image/Build/Template/WL341V3 - $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_sercomm_4M,851968,3014656) - $(call BuildFirmware/WL341V3,$(1),$(2),board=$(3),mtdlayout_sercomm_4M,851968,3014656) + $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(mtdlayout_sercomm_4M),851968,3014656) + $(call BuildFirmware/WL341V3,$(1),$(2),board=$(3) $(mtdlayout_sercomm_4M),851968,3014656) endef define Image/Build/Profile/WL341V3 @@ -224,7 +224,7 @@ mtdlayout_rtg32b1=mtdparts=spi0.0:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,8 mtd_rtg32b1_kernel_part_size=851968 mtd_rtg32b1_rootfs_part_size=3014656 define Image/Build/Template/RTG32B1 - $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_rtg32b1,$(mtd_rtg32b1_kernel_part_size),$(mtd_rtg32b1_rootfs_part_size)) + $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(mtdlayout_rtg32b1),$(mtd_rtg32b1_kernel_part_size),$(mtd_rtg32b1_rootfs_part_size)) endef define Image/Build/Profile/RTG32B1 @@ -250,7 +250,7 @@ endef mtdlayout_all0256n=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware) define Image/Build/Template/ALL0256N - $(call BuildFirmware/Generic,$(1),all0256n,board=ALL0256N,mtdlayout_all0256n,851968,3014656) + $(call BuildFirmware/Generic,$(1),all0256n,board=ALL0256N $(mtdlayout_all0256n),851968,3014656) endef define Image/Build/Profile/ALL0256N @@ -284,7 +284,7 @@ endef mtdlayout_whrg300n=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,960k(kernel),2752k(rootfs),64k(user)ro,3712k@0x50000(firmware) define Image/Build/Template/WHRG300N $(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N,ttyS1,57600) - $(call BuildFirmware/Buffalo,$(1),whr-g300n,$(call mkcmdline,WHR-G300N,ttyS1,57600),mtdlayout_whrg300n,983040,3801088) + $(call BuildFirmware/Buffalo,$(1),whr-g300n,$(call mkcmdline,WHR-G300N,ttyS1,57600) $(mtdlayout_whrg300n),983040,3801088) ( \ echo -n -e "# Airstation FirmWare\nrun u_fw\nreset\n\n" | \ dd bs=512 count=1 conv=sync; \ @@ -318,7 +318,7 @@ mtdlayout_argus_atp52b=mtdparts=physmap-flash.0:192k(bootloader)ro,64k(config),6 mtd_argus_atp52b_kernel_part_size=1179648 mtd_argus_atp52b_rootfs_part_size=6815744 define Image/Build/Template/ARGUS_ATP52B - $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_argus_atp52b,$(mtd_argus_atp52b_kernel_part_size),$(mtd_argus_atp52b_rootfs_part_size)) + $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(mtdlayout_argus_atp52b),$(mtd_argus_atp52b_kernel_part_size),$(mtd_argus_atp52b_rootfs_part_size)) endef define Image/Build/Profile/ARGUS_ATP52B @@ -329,7 +329,7 @@ mtdlayout_f5d8235=mtdparts=physmap-flash.0:320k(u-boot)ro,1536k(kernel),6208k(ro mtd_f5d8235_kernel_part_size=1572864 mtd_f5d8235_rootfs_part_size=6356992 define Image/Build/Template/F5D8235 - $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_f5d8235,$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size)) + $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(mtdlayout_f5d8235),$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size)) endef define Image/Build/Profile/F5D8235V2 @@ -387,7 +387,7 @@ endef mtdlayout_wlitx4ag300n=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2880k(rootfs),64k(user)ro,3712k@0x50000(firmware) define Image/Build/Template/WLITX4AG300N - $(call BuildFirmware/Buffalo2,$(1),wli-tx4-ag300n,WLI-TX4-AG300N,mtdlayout_wlitx4ag300n,851968,2949120) + $(call BuildFirmware/Buffalo2,$(1),wli-tx4-ag300n,WLI-TX4-AG300N,$(mtdlayout_wlitx4ag300n),851968,2949120) endef define Image/Build/Profile/WLITX4AG300N |