summaryrefslogtreecommitdiff
path: root/target/linux/ramips/patches-3.10/0013-PCI-MIPS-adds-mt7620a-pcie-driver.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ramips/patches-3.10/0013-PCI-MIPS-adds-mt7620a-pcie-driver.patch')
-rw-r--r--target/linux/ramips/patches-3.10/0013-PCI-MIPS-adds-mt7620a-pcie-driver.patch409
1 files changed, 409 insertions, 0 deletions
diff --git a/target/linux/ramips/patches-3.10/0013-PCI-MIPS-adds-mt7620a-pcie-driver.patch b/target/linux/ramips/patches-3.10/0013-PCI-MIPS-adds-mt7620a-pcie-driver.patch
new file mode 100644
index 0000000..1da472c
--- /dev/null
+++ b/target/linux/ramips/patches-3.10/0013-PCI-MIPS-adds-mt7620a-pcie-driver.patch
@@ -0,0 +1,409 @@
+From ded577553b06a85c12a89b8fbcfa2b51f30bc037 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 18 May 2013 22:06:15 +0200
+Subject: [PATCH 13/33] PCI: MIPS: adds mt7620a pcie driver
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/pci/Makefile | 1 +
+ arch/mips/pci/pci-mt7620a.c | 363 +++++++++++++++++++++++++++++++++++++++++++
+ arch/mips/ralink/Kconfig | 1 +
+ 3 files changed, 365 insertions(+)
+ create mode 100644 arch/mips/pci/pci-mt7620a.c
+
+diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
+index 3cbfd9b..025d3a7 100644
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -43,6 +43,7 @@ obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
+ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
+ obj-$(CONFIG_SOC_RT2880) += pci-rt2880.o
+ obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
++obj-$(CONFIG_SOC_MT7620) += pci-mt7620a.o
+ obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
+ obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
+ obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o
+diff --git a/arch/mips/pci/pci-mt7620a.c b/arch/mips/pci/pci-mt7620a.c
+new file mode 100644
+index 0000000..271763c
+--- /dev/null
++++ b/arch/mips/pci/pci-mt7620a.c
+@@ -0,0 +1,363 @@
++/*
++ * Ralink MT7620A SoC PCI support
++ *
++ * Copyright (C) 2007-2013 Bruce Chang
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/io.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/of_irq.h>
++#include <linux/of_pci.h>
++#include <linux/reset.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#define RALINK_PCI_MM_MAP_BASE 0x20000000
++#define RALINK_PCI_IO_MAP_BASE 0x10160000
++
++#define RALINK_INT_PCIE0 4
++#define RALINK_SYSTEM_CONTROL_BASE 0xb0000000
++#define RALINK_SYSCFG1 0x14
++#define RALINK_CLKCFG1 0x30
++#define RALINK_GPIOMODE 0x60
++#define RALINK_PCIE_CLK_GEN 0x7c
++#define RALINK_PCIE_CLK_GEN1 0x80
++#define PCIEPHY0_CFG 0x90
++#define PPLL_CFG1 0x9c
++#define PPLL_DRV 0xa0
++#define RALINK_PCI_HOST_MODE_EN (1<<7)
++#define RALINK_PCIE_RC_MODE_EN (1<<8)
++#define RALINK_PCIE_RST (1<<23)
++#define RALINK_PCI_RST (1<<24)
++#define RALINK_PCI_CLK_EN (1<<19)
++#define RALINK_PCIE_CLK_EN (1<<21)
++#define PCI_SLOTx2 (1<<11)
++#define PCI_SLOTx1 (2<<11)
++#define PDRV_SW_SET (1<<31)
++#define LC_CKDRVPD_ (1<<19)
++
++#define RALINK_PCI_CONFIG_ADDR 0x20
++#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG 0x24
++#define MEMORY_BASE 0x0
++#define RALINK_PCIE0_RST (1<<26)
++#define RALINK_PCI_BASE 0xB0140000
++#define RALINK_PCI_MEMBASE 0x28
++#define RALINK_PCI_IOBASE 0x2C
++
++#define RT6855_PCIE0_OFFSET 0x2000
++
++#define RALINK_PCI_PCICFG_ADDR 0x00
++#define RALINK_PCI0_BAR0SETUP_ADDR 0x10
++#define RALINK_PCI0_IMBASEBAR0_ADDR 0x18
++#define RALINK_PCI0_ID 0x30
++#define RALINK_PCI0_CLASS 0x34
++#define RALINK_PCI0_SUBID 0x38
++#define RALINK_PCI0_STATUS 0x50
++#define RALINK_PCI_PCIMSK_ADDR 0x0C
++
++#define RALINK_PCIE0_CLK_EN (1 << 26)
++
++#define BUSY 0x80000000
++#define WAITRETRY_MAX 10
++#define WRITE_MODE (1UL << 23)
++#define DATA_SHIFT 0
++#define ADDR_SHIFT 8
++
++
++static void __iomem *bridge_base;
++static void __iomem *pcie_base;
++
++static struct reset_control *rstpcie0;
++
++static inline void bridge_w32(u32 val, unsigned reg)
++{
++ iowrite32(val, bridge_base + reg);
++}
++
++static inline u32 bridge_r32(unsigned reg)
++{
++ return ioread32(bridge_base + reg);
++}
++
++static inline void pcie_w32(u32 val, unsigned reg)
++{
++ iowrite32(val, pcie_base + reg);
++}
++
++static inline u32 pcie_r32(unsigned reg)
++{
++ return ioread32(pcie_base + reg);
++}
++
++static inline void pcie_m32(u32 clr, u32 set, unsigned reg)
++{
++ u32 val = pcie_r32(reg);
++ val &= ~clr;
++ val |= set;
++ pcie_w32(val, reg);
++}
++
++int wait_pciephy_busy(void)
++{
++ unsigned long reg_value = 0x0, retry = 0;
++
++ while (1) {
++ //reg_value = rareg(READMODE, PCIEPHY0_CFG, 0);
++ reg_value = pcie_r32(PCIEPHY0_CFG);
++
++ if (reg_value & BUSY)
++ mdelay(100);
++ else
++ break;
++ if (retry++ > WAITRETRY_MAX){
++ printk("PCIE-PHY retry failed.\n");
++ return -1;
++ }
++ }
++ return 0;
++}
++
++static void pcie_phy(unsigned long addr, unsigned long val)
++{
++ wait_pciephy_busy();
++ pcie_w32(WRITE_MODE | (val << DATA_SHIFT) | (addr << ADDR_SHIFT), PCIEPHY0_CFG);
++ mdelay(1);
++ wait_pciephy_busy();
++}
++
++static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
++{
++ unsigned int slot = PCI_SLOT(devfn);
++ u8 func = PCI_FUNC(devfn);
++ u32 address;
++ u32 data;
++
++ address = (((where & 0xF00) >> 8) << 24) | (bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
++ bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
++ data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRTUAL_REG);
++
++ switch (size) {
++ case 1:
++ *val = (data >> ((where & 3) << 3)) & 0xff;
++ break;
++ case 2:
++ *val = (data >> ((where & 3) << 3)) & 0xffff;
++ break;
++ case 4:
++ *val = data;
++ break;
++ }
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
++{
++ unsigned int slot = PCI_SLOT(devfn);
++ u8 func = PCI_FUNC(devfn);
++ u32 address;
++ u32 data;
++
++ address = (((where & 0xF00) >> 8) << 24) | (bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
++ bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
++ data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRTUAL_REG);
++
++ switch (size) {
++ case 1:
++ data = (data & ~(0xff << ((where & 3) << 3))) |
++ (val << ((where & 3) << 3));
++ break;
++ case 2:
++ data = (data & ~(0xffff << ((where & 3) << 3))) |
++ (val << ((where & 3) << 3));
++ break;
++ case 4:
++ data = val;
++ break;
++ }
++
++ bridge_w32(data, RALINK_PCI_CONFIG_DATA_VIRTUAL_REG);
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++struct pci_ops mt7620a_pci_ops= {
++ .read = pci_config_read,
++ .write = pci_config_write,
++};
++
++static struct resource mt7620a_res_pci_mem1 = {
++ .name = "pci memory",
++ .start = RALINK_PCI_MM_MAP_BASE,
++ .end = (u32) ((RALINK_PCI_MM_MAP_BASE + (unsigned char *)0x0fffffff)),
++ .flags = IORESOURCE_MEM,
++};
++static struct resource mt7620a_res_pci_io1 = {
++ .name = "pci io",
++ .start = RALINK_PCI_IO_MAP_BASE,
++ .end = (u32) ((RALINK_PCI_IO_MAP_BASE + (unsigned char *)0x0ffff)),
++ .flags = IORESOURCE_IO,
++};
++
++struct pci_controller mt7620a_controller = {
++ .pci_ops = &mt7620a_pci_ops,
++ .mem_resource = &mt7620a_res_pci_mem1,
++ .io_resource = &mt7620a_res_pci_io1,
++ .mem_offset = 0x00000000UL,
++ .io_offset = 0x00000000UL,
++ .io_map_base = 0xa0000000,
++};
++
++static int mt7620a_pci_probe(struct platform_device *pdev)
++{
++ struct resource *bridge_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ struct resource *pcie_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++
++ rstpcie0 = devm_reset_control_get(&pdev->dev, "pcie0");
++ if (IS_ERR(rstpcie0))
++ return PTR_ERR(rstpcie0);
++
++ bridge_base = devm_request_and_ioremap(&pdev->dev, bridge_res);
++ if (!bridge_base)
++ return -ENOMEM;
++
++ pcie_base = devm_request_and_ioremap(&pdev->dev, pcie_res);
++ if (!pcie_base)
++ return -ENOMEM;
++
++ iomem_resource.start = 0;
++ iomem_resource.end= ~0;
++ ioport_resource.start= 0;
++ ioport_resource.end = ~0;
++
++ /* PCIE: bypass PCIe DLL */
++ pcie_phy(0x0, 0x80);
++ pcie_phy(0x1, 0x04);
++ /* PCIE: Elastic buffer control */
++ pcie_phy(0x68, 0xB4);
++
++ reset_control_assert(rstpcie0);
++ rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
++ rt_sysc_m32(1<<19, 1<<31, PPLL_DRV);
++ rt_sysc_m32(0x3 << 16, 0, RALINK_GPIOMODE);
++
++ reset_control_deassert(rstpcie0);
++ rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
++
++ mdelay(100);
++
++ if (!(rt_sysc_r32(PPLL_CFG1) & 1<<23)) {
++ printk("MT7620 PPLL unlock\n");
++ reset_control_assert(rstpcie0);
++ rt_sysc_m32(BIT(26), 0, RALINK_CLKCFG1);
++ return 0;
++ }
++ rt_sysc_m32((0x1<<18) | (0x1<<17), (0x1 << 19) | (0x1 << 31), PPLL_DRV);
++
++ mdelay(100);
++ reset_control_assert(rstpcie0);
++ rt_sysc_m32(0x30, 2 << 4, RALINK_SYSCFG1);
++
++ rt_sysc_m32(~0x7fffffff, 0x80000000, RALINK_PCIE_CLK_GEN);
++ rt_sysc_m32(~0x80ffffff, 0xa << 24, RALINK_PCIE_CLK_GEN1);
++
++ mdelay(50);
++ reset_control_deassert(rstpcie0);
++ pcie_m32(BIT(1), 0, RALINK_PCI_PCICFG_ADDR);
++ mdelay(100);
++
++ if (( pcie_r32(RALINK_PCI0_STATUS) & 0x1) == 0) {
++ reset_control_assert(rstpcie0);
++ rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
++ rt_sysc_m32(LC_CKDRVPD_, PDRV_SW_SET, PPLL_DRV);
++ printk("PCIE0 no card, disable it(RST&CLK)\n");
++ }
++
++ bridge_w32(0xffffffff, RALINK_PCI_MEMBASE);
++ bridge_w32(RALINK_PCI_IO_MAP_BASE, RALINK_PCI_IOBASE);
++
++ pcie_w32(0x7FFF0000, RALINK_PCI0_BAR0SETUP_ADDR);
++ pcie_w32(MEMORY_BASE, RALINK_PCI0_IMBASEBAR0_ADDR);
++ pcie_w32(0x08021814, RALINK_PCI0_ID);
++ pcie_w32(0x06040001, RALINK_PCI0_CLASS);
++ pcie_w32(0x28801814, RALINK_PCI0_SUBID);
++ pcie_m32(0, BIT(20), RALINK_PCI_PCIMSK_ADDR);
++
++ register_pci_controller(&mt7620a_controller);
++
++ return 0;
++}
++
++int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++ const struct resource *res;
++ u16 cmd;
++ u32 val;
++ int i, irq = 0;
++
++ if ((dev->bus->number == 0) && (slot == 0)) {
++ pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR); //open 7FFF:2G; ENABLE
++ pci_config_write(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, MEMORY_BASE);
++ pci_config_read(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, &val);
++ } else if ((dev->bus->number == 1) && (slot == 0x0)) {
++ irq = RALINK_INT_PCIE0;
++ } else {
++ printk("bus=0x%x, slot = 0x%x\n", dev->bus->number, slot);
++ return 0;
++ }
++
++ for (i = 0; i < 6; i++) {
++ res = &dev->resource[i];
++ }
++
++ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14); //configure cache line size 0x14
++ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xFF); //configure latency timer 0x10
++ pci_read_config_word(dev, PCI_COMMAND, &cmd);
++
++ // FIXME
++ cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
++ pci_write_config_word(dev, PCI_COMMAND, cmd);
++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
++ //pci_write_config_byte(dev, PCI_INTERRUPT_PIN, dev->irq);
++
++ return irq;
++}
++
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++ return 0;
++}
++
++static const struct of_device_id mt7620a_pci_ids[] = {
++ { .compatible = "ralink,mt7620a-pci" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, mt7620a_pci_ids);
++
++static struct platform_driver mt7620a_pci_driver = {
++ .probe = mt7620a_pci_probe,
++ .driver = {
++ .name = "mt7620a-pci",
++ .owner = THIS_MODULE,
++ .of_match_table = of_match_ptr(mt7620a_pci_ids),
++ },
++};
++
++static int __init mt7620a_pci_init(void)
++{
++ return platform_driver_register(&mt7620a_pci_driver);
++}
++
++arch_initcall(mt7620a_pci_init);
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index 592e5f9..992e365 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -24,6 +24,7 @@ choice
+
+ config SOC_MT7620
+ bool "MT7620"
++ select HW_HAS_PCI
+
+ endchoice
+
+--
+1.7.10.4
+
generated by cgit v1.1 at 2024-12-13 19:49:47 +0000