summaryrefslogtreecommitdiff
path: root/target/linux/ramips/patches-4.4/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ramips/patches-4.4/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch')
-rw-r--r--target/linux/ramips/patches-4.4/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch574
1 files changed, 574 insertions, 0 deletions
diff --git a/target/linux/ramips/patches-4.4/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch b/target/linux/ramips/patches-4.4/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch
new file mode 100644
index 0000000..6426326
--- /dev/null
+++ b/target/linux/ramips/patches-4.4/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch
@@ -0,0 +1,574 @@
+From 683af4ebb91a1600df1946ac4769d916b8a1be65 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 11:15:12 +0100
+Subject: [PATCH 42/53] SPI: ralink: add Ralink SoC spi driver
+
+Add the driver needed to make SPI work on Ralink SoC.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/spi/Kconfig | 6 +
+ drivers/spi/Makefile | 1 +
+ drivers/spi/spi-rt2880.c | 530 ++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 537 insertions(+)
+ create mode 100644 drivers/spi/spi-rt2880.c
+
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -477,6 +477,12 @@ config SPI_QUP
+ This driver can also be built as a module. If so, the module
+ will be called spi_qup.
+
++config SPI_RT2880
++ tristate "Ralink RT288x SPI Controller"
++ depends on RALINK
++ help
++ This selects a driver for the Ralink RT288x/RT305x SPI Controller.
++
+ config SPI_S3C24XX
+ tristate "Samsung S3C24XX series SPI"
+ depends on ARCH_S3C24XX
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -70,6 +70,7 @@ obj-$(CONFIG_SPI_QUP) += spi-qup.o
+ obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
+ obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
+ obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
++obj-$(CONFIG_SPI_RT2880) += spi-rt2880.o
+ obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
+ spi-s3c24xx-hw-y := spi-s3c24xx.o
+ spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
+--- /dev/null
++++ b/drivers/spi/spi-rt2880.c
+@@ -0,0 +1,530 @@
++/*
++ * spi-rt2880.c -- Ralink RT288x/RT305x SPI controller driver
++ *
++ * Copyright (C) 2011 Sergiy <piratfm@gmail.com>
++ * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * Some parts are based on spi-orion.c:
++ * Author: Shadi Ammouri <shadi@marvell.com>
++ * Copyright (C) 2007-2008 Marvell Ltd.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/reset.h>
++#include <linux/spi/spi.h>
++#include <linux/platform_device.h>
++#include <linux/gpio.h>
++
++#define DRIVER_NAME "spi-rt2880"
++
++#define RAMIPS_SPI_STAT 0x00
++#define RAMIPS_SPI_CFG 0x10
++#define RAMIPS_SPI_CTL 0x14
++#define RAMIPS_SPI_DATA 0x20
++#define RAMIPS_SPI_ADDR 0x24
++#define RAMIPS_SPI_BS 0x28
++#define RAMIPS_SPI_USER 0x2C
++#define RAMIPS_SPI_TXFIFO 0x30
++#define RAMIPS_SPI_RXFIFO 0x34
++#define RAMIPS_SPI_FIFO_STAT 0x38
++#define RAMIPS_SPI_MODE 0x3C
++#define RAMIPS_SPI_DEV_OFFSET 0x40
++#define RAMIPS_SPI_DMA 0x80
++#define RAMIPS_SPI_DMASTAT 0x84
++#define RAMIPS_SPI_ARBITER 0xF0
++
++/* SPISTAT register bit field */
++#define SPISTAT_BUSY BIT(0)
++
++/* SPICFG register bit field */
++#define SPICFG_ADDRMODE BIT(12)
++#define SPICFG_RXENVDIS BIT(11)
++#define SPICFG_RXCAP BIT(10)
++#define SPICFG_SPIENMODE BIT(9)
++#define SPICFG_MSBFIRST BIT(8)
++#define SPICFG_SPICLKPOL BIT(6)
++#define SPICFG_RXCLKEDGE_FALLING BIT(5)
++#define SPICFG_TXCLKEDGE_FALLING BIT(4)
++#define SPICFG_HIZSPI BIT(3)
++#define SPICFG_SPICLK_PRESCALE_MASK 0x7
++#define SPICFG_SPICLK_DIV2 0
++#define SPICFG_SPICLK_DIV4 1
++#define SPICFG_SPICLK_DIV8 2
++#define SPICFG_SPICLK_DIV16 3
++#define SPICFG_SPICLK_DIV32 4
++#define SPICFG_SPICLK_DIV64 5
++#define SPICFG_SPICLK_DIV128 6
++#define SPICFG_SPICLK_DISABLE 7
++
++/* SPICTL register bit field */
++#define SPICTL_START BIT(4)
++#define SPICTL_HIZSDO BIT(3)
++#define SPICTL_STARTWR BIT(2)
++#define SPICTL_STARTRD BIT(1)
++#define SPICTL_SPIENA BIT(0)
++
++/* SPIUSER register bit field */
++#define SPIUSER_USERMODE BIT(21)
++#define SPIUSER_INSTR_PHASE BIT(20)
++#define SPIUSER_ADDR_PHASE_MASK 0x7
++#define SPIUSER_ADDR_PHASE_OFFSET 17
++#define SPIUSER_MODE_PHASE BIT(16)
++#define SPIUSER_DUMMY_PHASE_MASK 0x3
++#define SPIUSER_DUMMY_PHASE_OFFSET 14
++#define SPIUSER_DATA_PHASE_MASK 0x3
++#define SPIUSER_DATA_PHASE_OFFSET 12
++#define SPIUSER_DATA_READ (BIT(0) << SPIUSER_DATA_PHASE_OFFSET)
++#define SPIUSER_DATA_WRITE (BIT(1) << SPIUSER_DATA_PHASE_OFFSET)
++#define SPIUSER_ADDR_TYPE_OFFSET 9
++#define SPIUSER_MODE_TYPE_OFFSET 6
++#define SPIUSER_DUMMY_TYPE_OFFSET 3
++#define SPIUSER_DATA_TYPE_OFFSET 0
++#define SPIUSER_TRANSFER_MASK 0x7
++#define SPIUSER_TRANSFER_SINGLE BIT(0)
++#define SPIUSER_TRANSFER_DUAL BIT(1)
++#define SPIUSER_TRANSFER_QUAD BIT(2)
++
++#define SPIUSER_TRANSFER_TYPE(type) ( \
++ (type << SPIUSER_ADDR_TYPE_OFFSET) | \
++ (type << SPIUSER_MODE_TYPE_OFFSET) | \
++ (type << SPIUSER_DUMMY_TYPE_OFFSET) | \
++ (type << SPIUSER_DATA_TYPE_OFFSET) \
++)
++
++/* SPIFIFOSTAT register bit field */
++#define SPIFIFOSTAT_TXEMPTY BIT(19)
++#define SPIFIFOSTAT_RXEMPTY BIT(18)
++#define SPIFIFOSTAT_TXFULL BIT(17)
++#define SPIFIFOSTAT_RXFULL BIT(16)
++#define SPIFIFOSTAT_FIFO_MASK 0xff
++#define SPIFIFOSTAT_TX_OFFSET 8
++#define SPIFIFOSTAT_RX_OFFSET 0
++
++#define SPI_FIFO_DEPTH 16
++
++/* SPIMODE register bit field */
++#define SPIMODE_MODE_OFFSET 24
++#define SPIMODE_DUMMY_OFFSET 0
++
++/* SPIARB register bit field */
++#define SPICTL_ARB_EN BIT(31)
++#define SPICTL_CSCTL1 BIT(16)
++#define SPI1_POR BIT(1)
++#define SPI0_POR BIT(0)
++
++#define RT2880_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | \
++ SPI_CS_HIGH)
++
++static atomic_t hw_reset_count = ATOMIC_INIT(0);
++
++struct rt2880_spi {
++ struct spi_master *master;
++ void __iomem *base;
++ u32 speed;
++ u16 wait_loops;
++ u16 mode;
++ struct clk *clk;
++};
++
++static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi)
++{
++ return spi_master_get_devdata(spi->master);
++}
++
++static inline u32 rt2880_spi_read(struct rt2880_spi *rs, u32 reg)
++{
++ return ioread32(rs->base + reg);
++}
++
++static inline void rt2880_spi_write(struct rt2880_spi *rs, u32 reg,
++ const u32 val)
++{
++ iowrite32(val, rs->base + reg);
++}
++
++static inline void rt2880_spi_setbits(struct rt2880_spi *rs, u32 reg, u32 mask)
++{
++ void __iomem *addr = rs->base + reg;
++
++ iowrite32((ioread32(addr) | mask), addr);
++}
++
++static inline void rt2880_spi_clrbits(struct rt2880_spi *rs, u32 reg, u32 mask)
++{
++ void __iomem *addr = rs->base + reg;
++
++ iowrite32((ioread32(addr) & ~mask), addr);
++}
++
++static u32 rt2880_spi_baudrate_get(struct spi_device *spi, unsigned int speed)
++{
++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
++ u32 rate;
++ u32 prescale;
++
++ /*
++ * the supported rates are: 2, 4, 8, ... 128
++ * round up as we look for equal or less speed
++ */
++ rate = DIV_ROUND_UP(clk_get_rate(rs->clk), speed);
++ rate = roundup_pow_of_two(rate);
++
++ /* Convert the rate to SPI clock divisor value. */
++ prescale = ilog2(rate / 2);
++
++ /* some tolerance. double and add 100 */
++ rs->wait_loops = (8 * HZ * loops_per_jiffy) /
++ (clk_get_rate(rs->clk) / rate);
++ rs->wait_loops = (rs->wait_loops << 1) + 100;
++ rs->speed = speed;
++
++ dev_dbg(&spi->dev, "speed: %lu/%u, rate: %u, prescal: %u, loops: %hu\n",
++ clk_get_rate(rs->clk) / rate, speed, rate, prescale,
++ rs->wait_loops);
++
++ return prescale;
++}
++
++static u32 get_arbiter_offset(struct spi_master *master)
++{
++ u32 offset;
++
++ offset = RAMIPS_SPI_ARBITER;
++ if (master->bus_num == 1)
++ offset -= RAMIPS_SPI_DEV_OFFSET;
++
++ return offset;
++}
++
++static void rt2880_spi_set_cs(struct spi_device *spi, bool enable)
++{
++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
++
++ if (enable)
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
++ else
++ rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
++}
++
++static int rt2880_spi_wait_ready(struct rt2880_spi *rs, int len)
++{
++ int loop = rs->wait_loops * len;
++
++ while ((rt2880_spi_read(rs, RAMIPS_SPI_STAT) & SPISTAT_BUSY) && --loop)
++ cpu_relax();
++
++ if (loop)
++ return 0;
++
++ return -ETIMEDOUT;
++}
++
++static void rt2880_dump_reg(struct spi_master *master)
++{
++ struct rt2880_spi *rs = spi_master_get_devdata(master);
++
++ dev_dbg(&master->dev, "stat: %08x, cfg: %08x, ctl: %08x, " \
++ "data: %08x, arb: %08x\n",
++ rt2880_spi_read(rs, RAMIPS_SPI_STAT),
++ rt2880_spi_read(rs, RAMIPS_SPI_CFG),
++ rt2880_spi_read(rs, RAMIPS_SPI_CTL),
++ rt2880_spi_read(rs, RAMIPS_SPI_DATA),
++ rt2880_spi_read(rs, get_arbiter_offset(master)));
++}
++
++static int rt2880_spi_transfer_one(struct spi_master *master,
++ struct spi_device *spi, struct spi_transfer *xfer)
++{
++ struct rt2880_spi *rs = spi_master_get_devdata(master);
++ unsigned len;
++ const u8 *tx = xfer->tx_buf;
++ u8 *rx = xfer->rx_buf;
++ int err = 0;
++
++ /* change clock speed */
++ if (unlikely(rs->speed != xfer->speed_hz)) {
++ u32 reg;
++ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
++ reg &= ~SPICFG_SPICLK_PRESCALE_MASK;
++ reg |= rt2880_spi_baudrate_get(spi, xfer->speed_hz);
++ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
++ }
++
++ if (tx) {
++ len = xfer->len;
++ while (len-- > 0) {
++ rt2880_spi_write(rs, RAMIPS_SPI_DATA, *tx++);
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR);
++ err = rt2880_spi_wait_ready(rs, 1);
++ if (err) {
++ dev_err(&spi->dev, "TX failed, err=%d\n", err);
++ goto out;
++ }
++ }
++ }
++
++ if (rx) {
++ len = xfer->len;
++ while (len-- > 0) {
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD);
++ err = rt2880_spi_wait_ready(rs, 1);
++ if (err) {
++ dev_err(&spi->dev, "RX failed, err=%d\n", err);
++ goto out;
++ }
++ *rx++ = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA);
++ }
++ }
++
++out:
++ return err;
++}
++
++/* copy from spi.c */
++static void spi_set_cs(struct spi_device *spi, bool enable)
++{
++ if (spi->mode & SPI_CS_HIGH)
++ enable = !enable;
++
++ if (spi->cs_gpio >= 0)
++ gpio_set_value(spi->cs_gpio, !enable);
++ else if (spi->master->set_cs)
++ spi->master->set_cs(spi, !enable);
++}
++
++static int rt2880_spi_setup(struct spi_device *spi)
++{
++ struct spi_master *master = spi->master;
++ struct rt2880_spi *rs = spi_master_get_devdata(master);
++ u32 reg, old_reg, arbit_off;
++
++ if ((spi->max_speed_hz > master->max_speed_hz) ||
++ (spi->max_speed_hz < master->min_speed_hz)) {
++ dev_err(&spi->dev, "invalide requested speed %d Hz\n",
++ spi->max_speed_hz);
++ return -EINVAL;
++ }
++
++ if (!(master->bits_per_word_mask &
++ BIT(spi->bits_per_word - 1))) {
++ dev_err(&spi->dev, "invalide bits_per_word %d\n",
++ spi->bits_per_word);
++ return -EINVAL;
++ }
++
++ /* the hardware seems can't work on mode0 force it to mode3 */
++ if ((spi->mode & (SPI_CPOL | SPI_CPHA)) == SPI_MODE_0) {
++ dev_warn(&spi->dev, "force spi mode3\n");
++ spi->mode |= SPI_MODE_3;
++ }
++
++ /* chip polarity */
++ arbit_off = get_arbiter_offset(master);
++ reg = old_reg = rt2880_spi_read(rs, arbit_off);
++ if (spi->mode & SPI_CS_HIGH) {
++ switch (master->bus_num) {
++ case 1:
++ reg |= SPI1_POR;
++ break;
++ default:
++ reg |= SPI0_POR;
++ break;
++ }
++ } else {
++ switch (master->bus_num) {
++ case 1:
++ reg &= ~SPI1_POR;
++ break;
++ default:
++ reg &= ~SPI0_POR;
++ break;
++ }
++ }
++
++ /* enable spi1 */
++ if (master->bus_num == 1)
++ reg |= SPICTL_ARB_EN;
++
++ if (reg != old_reg)
++ rt2880_spi_write(rs, arbit_off, reg);
++
++ /* deselected the spi device */
++ spi_set_cs(spi, false);
++
++ rt2880_dump_reg(master);
++
++ return 0;
++}
++
++static int rt2880_spi_prepare_message(struct spi_master *master,
++ struct spi_message *msg)
++{
++ struct rt2880_spi *rs = spi_master_get_devdata(master);
++ struct spi_device *spi = msg->spi;
++ u32 reg;
++
++ if ((rs->mode == spi->mode) && (rs->speed == spi->max_speed_hz))
++ return 0;
++
++#if 0
++ /* set spido to tri-state */
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO);
++#endif
++
++ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
++
++ reg &= ~(SPICFG_MSBFIRST | SPICFG_SPICLKPOL |
++ SPICFG_RXCLKEDGE_FALLING |
++ SPICFG_TXCLKEDGE_FALLING |
++ SPICFG_SPICLK_PRESCALE_MASK);
++
++ /* MSB */
++ if (!(spi->mode & SPI_LSB_FIRST))
++ reg |= SPICFG_MSBFIRST;
++
++ /* spi mode */
++ switch (spi->mode & (SPI_CPOL | SPI_CPHA)) {
++ case SPI_MODE_0:
++ reg |= SPICFG_TXCLKEDGE_FALLING;
++ break;
++ case SPI_MODE_1:
++ reg |= SPICFG_RXCLKEDGE_FALLING;
++ break;
++ case SPI_MODE_2:
++ reg |= SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING;
++ break;
++ case SPI_MODE_3:
++ reg |= SPICFG_SPICLKPOL | SPICFG_TXCLKEDGE_FALLING;
++ break;
++ }
++ rs->mode = spi->mode;
++
++#if 0
++ /* set spiclk and spiena to tri-state */
++ reg |= SPICFG_HIZSPI;
++#endif
++
++ /* clock divide */
++ reg |= rt2880_spi_baudrate_get(spi, spi->max_speed_hz);
++
++ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
++
++ return 0;
++}
++
++static int rt2880_spi_probe(struct platform_device *pdev)
++{
++ struct spi_master *master;
++ struct rt2880_spi *rs;
++ void __iomem *base;
++ struct resource *r;
++ struct clk *clk;
++ int ret;
++
++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ base = devm_ioremap_resource(&pdev->dev, r);
++ if (IS_ERR(base))
++ return PTR_ERR(base);
++
++ clk = devm_clk_get(&pdev->dev, NULL);
++ if (IS_ERR(clk)) {
++ dev_err(&pdev->dev, "unable to get SYS clock\n");
++ return PTR_ERR(clk);
++ }
++
++ ret = clk_prepare_enable(clk);
++ if (ret)
++ goto err_clk;
++
++ master = spi_alloc_master(&pdev->dev, sizeof(*rs));
++ if (master == NULL) {
++ dev_dbg(&pdev->dev, "master allocation failed\n");
++ ret = -ENOMEM;
++ goto err_clk;
++ }
++
++ master->dev.of_node = pdev->dev.of_node;
++ master->mode_bits = RT2880_SPI_MODE_BITS;
++ master->bits_per_word_mask = SPI_BPW_MASK(8);
++ master->min_speed_hz = clk_get_rate(clk) / 128;
++ master->max_speed_hz = clk_get_rate(clk) / 2;
++ master->flags = SPI_MASTER_HALF_DUPLEX;
++ master->setup = rt2880_spi_setup;
++ master->prepare_message = rt2880_spi_prepare_message;
++ master->set_cs = rt2880_spi_set_cs;
++ master->transfer_one = rt2880_spi_transfer_one,
++
++ dev_set_drvdata(&pdev->dev, master);
++
++ rs = spi_master_get_devdata(master);
++ rs->master = master;
++ rs->base = base;
++ rs->clk = clk;
++
++ if (atomic_inc_return(&hw_reset_count) == 1)
++ device_reset(&pdev->dev);
++
++ ret = devm_spi_register_master(&pdev->dev, master);
++ if (ret < 0) {
++ dev_err(&pdev->dev, "devm_spi_register_master error.\n");
++ goto err_master;
++ }
++
++ return ret;
++
++err_master:
++ spi_master_put(master);
++ kfree(master);
++err_clk:
++ clk_disable_unprepare(clk);
++
++ return ret;
++}
++
++static int rt2880_spi_remove(struct platform_device *pdev)
++{
++ struct spi_master *master;
++ struct rt2880_spi *rs;
++
++ master = dev_get_drvdata(&pdev->dev);
++ rs = spi_master_get_devdata(master);
++
++ clk_disable_unprepare(rs->clk);
++ atomic_dec(&hw_reset_count);
++
++ return 0;
++}
++
++MODULE_ALIAS("platform:" DRIVER_NAME);
++
++static const struct of_device_id rt2880_spi_match[] = {
++ { .compatible = "ralink,rt2880-spi" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, rt2880_spi_match);
++
++static struct platform_driver rt2880_spi_driver = {
++ .driver = {
++ .name = DRIVER_NAME,
++ .owner = THIS_MODULE,
++ .of_match_table = rt2880_spi_match,
++ },
++ .probe = rt2880_spi_probe,
++ .remove = rt2880_spi_remove,
++};
++
++module_platform_driver(rt2880_spi_driver);
++
++MODULE_DESCRIPTION("Ralink SPI driver");
++MODULE_AUTHOR("Sergiy <piratfm@gmail.com>");
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_LICENSE("GPL");