diff options
Diffstat (limited to 'target/linux/ramips')
| -rw-r--r-- | target/linux/ramips/files/arch/mips/ralink/rt288x/mach-rt-n15.c | 23 | ||||
| -rw-r--r-- | target/linux/ramips/rt288x/config-2.6.30 | 3 |
2 files changed, 24 insertions, 2 deletions
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-rt-n15.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-rt-n15.c index bc269bb..877bff3 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-rt-n15.c +++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-rt-n15.c @@ -1,7 +1,7 @@ /* * Asus RT-N15 board support * - * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published @@ -14,6 +14,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/leds.h> +#include <linux/rtl8366s.h> #include <asm/mach-ralink/machine.h> #include <asm/mach-ralink/dev_gpio_leds.h> @@ -26,6 +27,9 @@ #define RT_N15_GPIO_BUTTON_WPS 0 #define RT_N15_GPIO_BUTTON_RESET 12 +#define RT_N15_GPIO_RTL8366_SCK 2 +#define RT_N15_GPIO_RTL8366_SDA 1 + #ifdef CONFIG_MTD_PARTITIONS static struct mtd_partition rt_n15_partitions[] = { { @@ -74,14 +78,29 @@ static struct gpio_led rt_n15_leds_gpio[] __initdata = { } }; +static struct rtl8366s_platform_data rt_n15_rtl8366s_data = { + .gpio_sda = RT_N15_GPIO_RTL8366_SDA, + .gpio_sck = RT_N15_GPIO_RTL8366_SCK, +}; + +static struct platform_device rt_n15_rtl8366s_device = { + .name = RTL8366S_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &rt_n15_rtl8366s_data, + } +}; + static void __init rt_n15_init(void) { - rt288x_gpio_init(RT2880_GPIO_MODE_UART0); + rt288x_gpio_init(RT2880_GPIO_MODE_UART0 | RT2880_GPIO_MODE_I2C); rt288x_register_flash(0, &rt_n15_flash_data); ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n15_leds_gpio), rt_n15_leds_gpio); + + platform_device_register(&rt_n15_rtl8366s_device); } MIPS_MACHINE(RAMIPS_MACH_RT_N15, "RT-N15", "Asus RT-N15", rt_n15_init); diff --git a/target/linux/ramips/rt288x/config-2.6.30 b/target/linux/ramips/rt288x/config-2.6.30 index 0167eb5..f2e82a3 100644 --- a/target/linux/ramips/rt288x/config-2.6.30 +++ b/target/linux/ramips/rt288x/config-2.6.30 @@ -118,6 +118,8 @@ CONFIG_RALINK_RT288X=y # CONFIG_RALINK_RT305X is not set CONFIG_RT288X_MACH_RT_N15=y CONFIG_RT288X_MACH_WZR_AGL300NH=y +CONFIG_RTL8366S_PHY=y +CONFIG_RTL8366_SMI=y CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_SCSI_DMA is not set # CONFIG_SERIAL_8250_EXTENDED is not set @@ -139,6 +141,7 @@ CONFIG_SERIAL_8250_RT288X=y # CONFIG_SLOW_WORK is not set CONFIG_SLUB=y CONFIG_SOC_RT288X=y +CONFIG_SWCONFIG=y CONFIG_SYS_HAS_CPU_MIPS32_R1=y CONFIG_SYS_HAS_CPU_MIPS32_R2=y CONFIG_SYS_HAS_EARLY_PRINTK=y |