summaryrefslogtreecommitdiff
path: root/target/linux/ramips
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ramips')
-rw-r--r--[-rwxr-xr-x]target/linux/ramips/base-files/etc/board.d/01_leds5
-rw-r--r--[-rwxr-xr-x]target/linux/ramips/base-files/etc/board.d/02_network1
-rw-r--r--[-rwxr-xr-x]target/linux/ramips/base-files/lib/ramips.sh3
-rw-r--r--[-rwxr-xr-x]target/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/dts/ZBT-WE826.dts124
-rw-r--r--target/linux/ramips/image/Makefile2
-rw-r--r--target/linux/ramips/mt7620/profiles/zbt.mk19
7 files changed, 155 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index d1b4e15..8fd50fe 100755..100644
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -268,6 +268,11 @@ zbt-wa05)
set_wifi_led "$board:blue:air"
set_usb_led "$board:blue:usb"
;;
+zbt-we826)
+ ucidef_set_led_default "power" "power" "$board:green:power" "1"
+ set_wifi_led "$board:green:wifi"
+ set_usb_led "$board:green:usb"
+ ;;
zbt-wr8305rt)
ucidef_set_led_default "power" "power" "$board:green:sys" "1"
set_usb_led "$board:green:usb"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 0121e51..0a680d0 100755..100644
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -209,6 +209,7 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "0:wan" "6@eth0"
;;
+ zbt-we826|\
zbt-wr8305rt)
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index c6c32fe..c4eb357 100755..100644
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -475,6 +475,9 @@ ramips_board_detect() {
*"ZBT-WA05")
name="zbt-wa05"
;;
+ *"ZBT-WE826")
+ name="zbt-we826"
+ ;;
*"ZBT-WG2626")
name="zbt-wg2626"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 0cae707..df1eded 100755..100644
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -139,6 +139,7 @@ platform_check_image() {
y1|\
y1s|\
zbt-wa05|\
+ zbt-we826|\
zbt-wg2626|\
zbt-wr8305rt|\
zte-q7|\
diff --git a/target/linux/ramips/dts/ZBT-WE826.dts b/target/linux/ramips/dts/ZBT-WE826.dts
new file mode 100644
index 0000000..22bef99
--- /dev/null
+++ b/target/linux/ramips/dts/ZBT-WE826.dts
@@ -0,0 +1,124 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+ compatible = "zbtlink,zbt-we826", "ralink,mt7620a-soc";
+ model = "ZBT-WE826";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ palmbus@10000000 {
+ gpio0: gpio@600 {
+ status = "okay";
+ };
+
+ gpio1: gpio@638 {
+ status = "okay";
+ };
+
+ gpio3: gpio@688 {
+ status = "okay";
+ };
+
+ spi@b00 {
+ status = "okay";
+
+ en25q128@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25q128";
+ reg = <0 0>;
+ linux,modalias = "m25p80";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+ };
+
+ sdhci@10130000 {
+ status = "okay";
+ };
+
+ ehci@101c0000 {
+ status = "okay";
+ };
+
+ ohci@101c1000 {
+ status = "okay";
+ };
+
+ ethernet@10100000 {
+ mtd-mac-address = <&factory 0x4>;
+ ralink,port-map = "wllll";
+ };
+
+ wmac@10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "uartf", "wled", "spi refclk", "pa";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ power {
+ label = "zbt-we826:green:power";
+ gpios = <&gpio1 14 0>;
+ };
+ usb {
+ label = "zbt-we826:green:usb";
+ gpios = <&gpio1 15 0>;
+ };
+ air {
+ label = "zbt-we826:green:wifi";
+ gpios = <&gpio3 0 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 1>;
+ linux,code = <0x198>;
+ };
+ };
+
+ pcie@10140000 {
+ status = "okay";
+ };
+}; \ No newline at end of file
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 307c3f9..5d90ced 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -976,6 +976,7 @@ Image/Build/Profile/MIWIFI-MINI=$(call BuildFirmware/Default16M/$(1),$(1),miwifi
Image/Build/Profile/ZTE-Q7=$(call BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7)
Image/Build/Profile/YOUKU-YK1=$(call BuildFirmware/Default16M/$(1),$(1),youku-yk1,YOUKU-YK1)
Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
+Image/Build/Profile/ZBT-WE826=$(call BuildFirmware/Default16M/$(1),$(1),zbt-we826,ZBT-WE826)
Image/Build/Profile/ZBT-WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wr8305rt,ZBT-WR8305RT)
Image/Build/Profile/ArcherC20i=$(call BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i)
microwrt_mtd_size=16515072
@@ -1018,6 +1019,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/ZTE-Q7,$(1))
$(call Image/Build/Profile/YOUKU-YK1,$(1))
$(call Image/Build/Profile/ZBT-WA05,$(1))
+ $(call Image/Build/Profile/ZBT-WE826,$(1))
$(call Image/Build/Profile/ZBT-WR8305RT,$(1))
$(call Image/Build/Profile/ArcherC20i,$(1))
$(call Image/Build/Profile/MicroWRT,$(1))
diff --git a/target/linux/ramips/mt7620/profiles/zbt.mk b/target/linux/ramips/mt7620/profiles/zbt.mk
new file mode 100644
index 0000000..c33048f
--- /dev/null
+++ b/target/linux/ramips/mt7620/profiles/zbt.mk
@@ -0,0 +1,19 @@
+#
+# Copyright (C) 2016 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/ZBT-WE826
+ NAME:=ZBT-WE826 Device
+ PACKAGES:=\
+ kmod-scsi-core kmod-scsi-generic kmod-mmc kmod-sdhci \
+ block-mount kmod-usb-core kmod-usb-dwc2 kmod-usb2 kmod-usb-ohci \
+ kmod-mt76
+endef
+
+define Profile/ZBT-WE826/Description
+ Support for ZBT WE-826-(B,T) routers
+endef
+$(eval $(call Profile,ZBT-WE826))