summaryrefslogtreecommitdiff
path: root/target/linux/rdc/patches-2.6.30
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/rdc/patches-2.6.30')
-rw-r--r--target/linux/rdc/patches-2.6.30/001-rdc3210_flash_map.patch63
-rw-r--r--target/linux/rdc/patches-2.6.30/003-rootfstype.patch11
-rw-r--r--target/linux/rdc/patches-2.6.30/004-yenta_mystery.patch20
-rw-r--r--target/linux/rdc/patches-2.6.30/005-fix_amit_breakage.patch40
-rw-r--r--target/linux/rdc/patches-2.6.30/008-r8610_flash_map.patch29
-rw-r--r--target/linux/rdc/patches-2.6.30/009-rdc321x_select_embedded.patch10
6 files changed, 173 insertions, 0 deletions
diff --git a/target/linux/rdc/patches-2.6.30/001-rdc3210_flash_map.patch b/target/linux/rdc/patches-2.6.30/001-rdc3210_flash_map.patch
new file mode 100644
index 0000000..2c35b84
--- /dev/null
+++ b/target/linux/rdc/patches-2.6.30/001-rdc3210_flash_map.patch
@@ -0,0 +1,63 @@
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -112,6 +112,50 @@ config MTD_SUN_UFLASH
+ Sun Microsystems boardsets. This driver will require CFI support
+ in the kernel, so if you did not enable CFI previously, do that now.
+
++config MTD_RDC3210
++ tristate "CFI Flash device mapped on RDC3210"
++ depends on X86 && MTD_CFI && MTD_PARTITIONS
++ help
++ RDC-3210 is the flash device we find on Ralink reference board.
++
++config MTD_RDC3210_STATIC_MAP
++ bool "Partitions on RDC3210 mapped statically" if MTD_RDC3210
++ select MTD_RDC3210_FACTORY_PRESENT
++ help
++ The mapping driver will use the static partition map for the
++ RDC-3210 flash device.
++
++config MTD_RDC3210_FACTORY_PRESENT
++ bool "Reserve a partition on RDC3210 for factory presets"
++ depends on MTD_RDC3210
++ default y
++ help
++ The mapping driver will reserve a partition on the RDC-3210 flash
++ device for resetting flash contents to factory defaults.
++
++config MTD_RDC3210_ALLOW_JFFS2
++ bool "JFFS2 filesystem usable in a partition on RDC3210"
++ depends on MTD_RDC3210 && !MTD_RDC3210_STATIC_MAP
++ help
++ The mapping driver will align a partition on the RDC-3210 flash
++ device to an erase-block boundary so that a JFFS2 filesystem may
++ reside on it.
++
++config MTD_RDC3210_SIZE
++ hex "Amount of flash memory on RDC3210"
++ depends on MTD_RDC3210
++ default "0x400000"
++ help
++ Total size in bytes of the RDC-3210 flash device
++
++config MTD_RDC3210_BUSWIDTH
++ int "Width of CFI Flash device mapped on RDC3210"
++ depends on MTD_RDC3210
++ default "2"
++ help
++ Number of bytes addressed on the RDC-3210 flash device before
++ addressing the same chip again
++
+ config MTD_SC520CDP
+ tristate "CFI Flash device mapped on AMD SC520 CDP"
+ depends on X86 && MTD_CFI && MTD_CONCAT
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -27,6 +27,7 @@ obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_
+ obj-$(CONFIG_MTD_PMC_MSP_EVM) += pmcmsp-flash.o
+ obj-$(CONFIG_MTD_PMC_MSP_RAMROOT)+= pmcmsp-ramroot.o
+ obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o
++obj-$(CONFIG_MTD_RDC3210) += rdc3210.o
+ obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o
+ obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o
+ obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o
diff --git a/target/linux/rdc/patches-2.6.30/003-rootfstype.patch b/target/linux/rdc/patches-2.6.30/003-rootfstype.patch
new file mode 100644
index 0000000..386e638
--- /dev/null
+++ b/target/linux/rdc/patches-2.6.30/003-rootfstype.patch
@@ -0,0 +1,11 @@
+--- a/init/do_mounts.c
++++ b/init/do_mounts.c
+@@ -189,6 +189,8 @@ static void __init get_fs_names(char *pa
+ {
+ char *s = page;
+
++ if (!root_fs_names)
++ root_fs_names = "squashfs,jffs2";
+ if (root_fs_names) {
+ strcpy(page, root_fs_names);
+ while (*s++) {
diff --git a/target/linux/rdc/patches-2.6.30/004-yenta_mystery.patch b/target/linux/rdc/patches-2.6.30/004-yenta_mystery.patch
new file mode 100644
index 0000000..4c2e2fa
--- /dev/null
+++ b/target/linux/rdc/patches-2.6.30/004-yenta_mystery.patch
@@ -0,0 +1,20 @@
+--- a/drivers/pcmcia/yenta_socket.c
++++ b/drivers/pcmcia/yenta_socket.c
+@@ -1174,6 +1174,17 @@ static int __devinit yenta_probe (struct
+
+ /* We must finish initialization here */
+
++#ifdef CONFIG_X86_RDC
++/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044f044 */
++#define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0844b060
++/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044d044 */
++
++ config_writel(socket, 32*4, YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK);
++ config_writel(socket, 35*4, 0x00000022);
++ config_writel(socket, 36*4, 0x60200000);
++ config_writel(socket, 40*4, 0x7e020000);
++#endif
++
+ if (!socket->cb_irq || request_irq(socket->cb_irq, yenta_interrupt, IRQF_SHARED, "yenta", socket)) {
+ /* No IRQ or request_irq failed. Poll */
+ socket->cb_irq = 0; /* But zero is a valid IRQ number. */
diff --git a/target/linux/rdc/patches-2.6.30/005-fix_amit_breakage.patch b/target/linux/rdc/patches-2.6.30/005-fix_amit_breakage.patch
new file mode 100644
index 0000000..8103e84
--- /dev/null
+++ b/target/linux/rdc/patches-2.6.30/005-fix_amit_breakage.patch
@@ -0,0 +1,40 @@
+--- a/arch/x86/boot/boot.h
++++ b/arch/x86/boot/boot.h
+@@ -62,7 +62,7 @@ static inline void outl(u32 v, u16 port)
+ {
+ asm volatile("outl %0,%1" : : "a" (v), "dN" (port));
+ }
+-static inline u32 inl(u32 port)
++static inline u32 inl(u16 port)
+ {
+ u32 v;
+ asm volatile("inl %1,%0" : "=a" (v) : "dN" (port));
+--- a/arch/x86/boot/pm.c
++++ b/arch/x86/boot/pm.c
+@@ -14,6 +14,9 @@
+
+ #include "boot.h"
+ #include <asm/segment.h>
++#ifdef CONFIG_X86_RDC
++#include <asm/mach-rdc/rdc321x_defs.h>
++#endif
+
+ /*
+ * Invoke the realmode switch hook if present; otherwise
+@@ -156,6 +159,16 @@ void go_to_protected_mode(void)
+ die();
+ }
+
++#ifdef CONFIG_X86_RDC
++ {
++ u32 bootctl;
++
++ outl(0x80003840, RDC3210_CFGREG_ADDR);
++ bootctl = inl(RDC3210_CFGREG_DATA) | 0x07ff0000;
++ outl(bootctl, RDC3210_CFGREG_DATA);
++ }
++#endif
++
+ /* Reset coprocessor (IGNNE#) */
+ reset_coprocessor();
+
diff --git a/target/linux/rdc/patches-2.6.30/008-r8610_flash_map.patch b/target/linux/rdc/patches-2.6.30/008-r8610_flash_map.patch
new file mode 100644
index 0000000..e0ccb83
--- /dev/null
+++ b/target/linux/rdc/patches-2.6.30/008-r8610_flash_map.patch
@@ -0,0 +1,29 @@
+Index: linux-2.6.29.5/drivers/mtd/maps/Kconfig
+===================================================================
+--- linux-2.6.29.5.orig/drivers/mtd/maps/Kconfig 2009-06-19 11:26:44.000000000 +0200
++++ linux-2.6.29.5/drivers/mtd/maps/Kconfig 2009-06-19 11:26:45.000000000 +0200
+@@ -167,6 +167,12 @@
+ Number of bytes addressed on the RDC-3210 flash device before
+ addressing the same chip again
+
++config MTD_R8610
++ tristate "CFI flash device mapped on R8610"
++ depends on X86 && MTD_CFI && MTD_PARTITIONS
++ help
++ Flash support for the RDC R8610 evaluation board.
++
+ config MTD_SC520CDP
+ tristate "CFI Flash device mapped on AMD SC520 CDP"
+ depends on X86 && MTD_CFI && MTD_CONCAT
+Index: linux-2.6.29.5/drivers/mtd/maps/Makefile
+===================================================================
+--- linux-2.6.29.5.orig/drivers/mtd/maps/Makefile 2009-06-19 11:26:44.000000000 +0200
++++ linux-2.6.29.5/drivers/mtd/maps/Makefile 2009-06-19 11:26:45.000000000 +0200
+@@ -28,6 +28,7 @@
+ obj-$(CONFIG_MTD_PMC_MSP_RAMROOT)+= pmcmsp-ramroot.o
+ obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o
+ obj-$(CONFIG_MTD_RDC3210) += rdc3210.o
++obj-$(CONFIG_MTD_R8610) += r8610.o
+ obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o
+ obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o
+ obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o
diff --git a/target/linux/rdc/patches-2.6.30/009-rdc321x_select_embedded.patch b/target/linux/rdc/patches-2.6.30/009-rdc321x_select_embedded.patch
new file mode 100644
index 0000000..84ab6c5
--- /dev/null
+++ b/target/linux/rdc/patches-2.6.30/009-rdc321x_select_embedded.patch
@@ -0,0 +1,10 @@
+--- a/arch/x86/Kconfig 2009-06-19 15:06:16.000000000 +0200
++++ b/arch/x86/Kconfig 2009-06-19 15:06:01.000000000 +0200
+@@ -380,6 +380,7 @@
+ depends on X86_EXTENDED_PLATFORM
+ select M486
+ select X86_REBOOTFIXUPS
++ select EMBEDDED
+ ---help---
+ This option is needed for RDC R-321x system-on-chip, also known
+ as R-8610-(G).