diff options
Diffstat (limited to 'target/linux/s3c24xx/patches-2.6.24/1209-touchscreen-meddling.patch.patch')
| -rw-r--r-- | target/linux/s3c24xx/patches-2.6.24/1209-touchscreen-meddling.patch.patch | 505 |
1 files changed, 505 insertions, 0 deletions
diff --git a/target/linux/s3c24xx/patches-2.6.24/1209-touchscreen-meddling.patch.patch b/target/linux/s3c24xx/patches-2.6.24/1209-touchscreen-meddling.patch.patch new file mode 100644 index 0000000..10dda15 --- /dev/null +++ b/target/linux/s3c24xx/patches-2.6.24/1209-touchscreen-meddling.patch.patch @@ -0,0 +1,505 @@ +From cf7096e6f6e24d8a362ad05f768d609a2921f479 Mon Sep 17 00:00:00 2001 +From: Andy Green <andy@openmoko.com> +Date: Wed, 2 Jul 2008 22:43:31 +0100 +Subject: [PATCH] touchscreen-meddling.patch + +Touchscreen on GTA01-02 experiences noise on the channel that serves the +"tall axis" of the LCM. The sample quality of the other axis is good. +The bad samples have a characteristic of one shot excursions that can +reach +/- 20% or more of the sample average. + +Previously, we had a simple averaging scheme going in the touchscreen +driver that summed up 32 x and ys and then divided it by 32. This patch +first tidies up the existing code for style, then adds a new "running +average" concept with a FIFO. The running average is separate from the +summing average mentioned above, and is accurate for the last n samples +sample-by-sample, where n is set by 1 << excursion_filter_len_bits in the +machine / platform stuff. + +The heuristic the patch implements for the filtering is to accept all +samples, but tag the *previous* sample with a flag if it differed from +the running average by more than reject_threshold_vs_avg in either +axis. The next sample time, a beauty contest is held if the flag was +set to decide if we think the previous sample was a one-shot excursion +(detected by the new sample being closer to the average than to the +flagged previous sample), or if we believe we are moving (detected by +the new sample being closer to the flagged previous sample than the +average. In the case that we believe the previous sample was an +excursion, we simply overwrite it with the new data and adjust the +summing average to use the new data instead of the excursion data. + +I only tested this by eyeballing the output of ts_print_raw, but it +seemed to be quite a bit better. Gross movement appeared to be +tracked fine too. If folks want to try different heuristics on top +of this patch, be my guest; either way feedback on what it looks like +with a graphical app would be good. + +Signed-off-by: Andy Green <andy@openmoko.com> +--- + arch/arm/mach-s3c2440/mach-gta02.c | 10 +- + drivers/input/touchscreen/s3c2410_ts.c | 256 ++++++++++++++++++++++++-------- + include/asm-arm/arch-s3c2410/ts.h | 8 +- + 3 files changed, 205 insertions(+), 69 deletions(-) + +diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c +index c32bb2a..afe8039 100644 +--- a/arch/arm/mach-s3c2440/mach-gta02.c ++++ b/arch/arm/mach-s3c2440/mach-gta02.c +@@ -897,10 +897,18 @@ static struct s3c2410_udc_mach_info gta02_udc_cfg = { + + static struct s3c2410_ts_mach_info gta02_ts_cfg = { + .delay = 10000, +- .presc = 65, ++ .presc = 50000000 / 1000000, /* 50 MHz PCLK / 1MHz */ ++ /* simple averaging, 2^n samples */ + .oversampling_shift = 5, ++ /* averaging filter length, 2^n */ ++ .excursion_filter_len_bits = 5, ++ /* flagged for beauty contest on next sample if differs from ++ * average more than this ++ */ ++ .reject_threshold_vs_avg = 2, + }; + ++ + /* SPI: LCM control interface attached to Glamo3362 */ + + static void gta02_jbt6k74_reset(int devidx, int level) +diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c +index 6d395ca..83e7aff 100644 +--- a/drivers/input/touchscreen/s3c2410_ts.c ++++ b/drivers/input/touchscreen/s3c2410_ts.c +@@ -36,6 +36,9 @@ + * + * 2007-05-23: Harald Welte <laforge@openmoko.org> + * - Add proper support for S32440 ++ * ++ * 2008-06-18: Andy Green <andy@openmoko.com> ++ * - Outlier removal + */ + + #include <linux/errno.h> +@@ -62,11 +65,16 @@ + #define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0)) + + #define WAIT4INT(x) (((x)<<8) | \ +- S3C2410_ADCTSC_YM_SEN | S3C2410_ADCTSC_YP_SEN | S3C2410_ADCTSC_XP_SEN | \ ++ S3C2410_ADCTSC_YM_SEN | \ ++ S3C2410_ADCTSC_YP_SEN | \ ++ S3C2410_ADCTSC_XP_SEN | \ + S3C2410_ADCTSC_XY_PST(3)) + +-#define AUTOPST (S3C2410_ADCTSC_YM_SEN | S3C2410_ADCTSC_YP_SEN | S3C2410_ADCTSC_XP_SEN | \ +- S3C2410_ADCTSC_AUTO_PST | S3C2410_ADCTSC_XY_PST(0)) ++#define AUTOPST (S3C2410_ADCTSC_YM_SEN | \ ++ S3C2410_ADCTSC_YP_SEN | \ ++ S3C2410_ADCTSC_XP_SEN | \ ++ S3C2410_ADCTSC_AUTO_PST | \ ++ S3C2410_ADCTSC_XY_PST(0)) + + #define DEBUG_LVL KERN_DEBUG + +@@ -85,17 +93,46 @@ static char *s3c2410ts_name = "s3c2410 TouchScreen"; + * Per-touchscreen data. + */ + ++struct s3c2410ts_sample { ++ int x; ++ int y; ++}; ++ + struct s3c2410ts { + struct input_dev *dev; + long xp; + long yp; + int count; + int shift; ++ int extent; /* 1 << shift */ ++ ++ /* the raw sample fifo is a lightweight way to track a running average ++ * of all taken samples. "running average" here means that it gives ++ * correct average for each sample, not only at the end of block of ++ * samples ++ */ ++ int excursion_filter_len; ++ struct s3c2410ts_sample *raw_sample_fifo; ++ int head_raw_fifo; ++ int tail_raw_fifo; ++ struct s3c2410ts_sample raw_running_avg; ++ int reject_threshold_vs_avg; ++ int flag_previous_exceeded_threshold; + }; + + static struct s3c2410ts ts; + static void __iomem *base_addr; + ++static void clear_raw_fifo(void) ++{ ++ ts.head_raw_fifo = 0; ++ ts.tail_raw_fifo = 0; ++ ts.raw_running_avg.x = 0; ++ ts.raw_running_avg.y = 0; ++ ts.flag_previous_exceeded_threshold = 0; ++} ++ ++ + static inline void s3c2410_ts_connect(void) + { + s3c2410_gpio_cfgpin(S3C2410_GPG12, S3C2410_GPG12_XMON); +@@ -110,47 +147,52 @@ static void touch_timer_fire(unsigned long data) + unsigned long data1; + int updown; + +- data0 = readl(base_addr+S3C2410_ADCDAT0); +- data1 = readl(base_addr+S3C2410_ADCDAT1); ++ data0 = readl(base_addr + S3C2410_ADCDAT0); ++ data1 = readl(base_addr + S3C2410_ADCDAT1); + +- updown = (!(data0 & S3C2410_ADCDAT0_UPDOWN)) && (!(data1 & S3C2410_ADCDAT0_UPDOWN)); ++ updown = (!(data0 & S3C2410_ADCDAT0_UPDOWN)) && ++ (!(data1 & S3C2410_ADCDAT0_UPDOWN)); + +- if (updown) { +- if (ts.count != 0) { +- ts.xp >>= ts.shift; +- ts.yp >>= ts.shift; ++ if (updown) { ++ if (ts.count != 0) { ++ ts.xp >>= ts.shift; ++ ts.yp >>= ts.shift; + + #ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG +- { +- struct timeval tv; +- do_gettimeofday(&tv); +- printk(DEBUG_LVL "T: %06d, X: %03ld, Y: %03ld\n", (int)tv.tv_usec, ts.xp, ts.yp); +- } ++ { ++ struct timeval tv; ++ ++ do_gettimeofday(&tv); ++ printk(DEBUG_LVL "T:%06d, X:%03ld, Y:%03ld\n", ++ (int)tv.tv_usec, ts.xp, ts.yp); ++ } + #endif + +- input_report_abs(ts.dev, ABS_X, ts.xp); +- input_report_abs(ts.dev, ABS_Y, ts.yp); ++ input_report_abs(ts.dev, ABS_X, ts.xp); ++ input_report_abs(ts.dev, ABS_Y, ts.yp); + +- input_report_key(ts.dev, BTN_TOUCH, 1); +- input_report_abs(ts.dev, ABS_PRESSURE, 1); +- input_sync(ts.dev); +- } ++ input_report_key(ts.dev, BTN_TOUCH, 1); ++ input_report_abs(ts.dev, ABS_PRESSURE, 1); ++ input_sync(ts.dev); ++ } + +- ts.xp = 0; +- ts.yp = 0; +- ts.count = 0; ++ ts.xp = 0; ++ ts.yp = 0; ++ ts.count = 0; + +- writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST, base_addr+S3C2410_ADCTSC); +- writel(readl(base_addr+S3C2410_ADCCON) | S3C2410_ADCCON_ENABLE_START, base_addr+S3C2410_ADCCON); +- } else { +- ts.count = 0; ++ writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST, ++ base_addr+S3C2410_ADCTSC); ++ writel(readl(base_addr+S3C2410_ADCCON) | ++ S3C2410_ADCCON_ENABLE_START, base_addr+S3C2410_ADCCON); ++ } else { ++ ts.count = 0; + +- input_report_key(ts.dev, BTN_TOUCH, 0); +- input_report_abs(ts.dev, ABS_PRESSURE, 0); +- input_sync(ts.dev); ++ input_report_key(ts.dev, BTN_TOUCH, 0); ++ input_report_abs(ts.dev, ABS_PRESSURE, 0); ++ input_sync(ts.dev); + +- writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC); +- } ++ writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC); ++ } + } + + static struct timer_list touch_timer = +@@ -165,7 +207,8 @@ static irqreturn_t stylus_updown(int irq, void *dev_id) + data0 = readl(base_addr+S3C2410_ADCDAT0); + data1 = readl(base_addr+S3C2410_ADCDAT1); + +- updown = (!(data0 & S3C2410_ADCDAT0_UPDOWN)) && (!(data1 & S3C2410_ADCDAT0_UPDOWN)); ++ updown = (!(data0 & S3C2410_ADCDAT0_UPDOWN)) && ++ (!(data1 & S3C2410_ADCDAT0_UPDOWN)); + + /* TODO we should never get an interrupt with updown set while + * the timer is running, but maybe we ought to verify that the +@@ -180,24 +223,94 @@ static irqreturn_t stylus_updown(int irq, void *dev_id) + + static irqreturn_t stylus_action(int irq, void *dev_id) + { +- unsigned long data0; +- unsigned long data1; +- +- data0 = readl(base_addr+S3C2410_ADCDAT0); +- data1 = readl(base_addr+S3C2410_ADCDAT1); ++ unsigned long x; ++ unsigned long y; ++ int length = (ts.head_raw_fifo - ts.tail_raw_fifo) & (ts.extent - 1); ++ int scaled_avg_x = ts.raw_running_avg.x / length; ++ int scaled_avg_y = ts.raw_running_avg.y / length; ++ ++ x = readl(base_addr + S3C2410_ADCDAT0) & S3C2410_ADCDAT0_XPDATA_MASK; ++ y = readl(base_addr + S3C2410_ADCDAT1) & S3C2410_ADCDAT1_YPDATA_MASK; ++ ++ /* we appear to accept every sample into both the running average FIFO ++ * and the summing average. BUT, if the last sample crossed a ++ * machine-set threshold, each time we do a beauty contest ++ * on the new sample comparing if it is closer to the running ++ * average and the previous sample. If it is closer to the previous ++ * suspicious sample, we assume the change is real and accept both ++ * if the new sample has returned to being closer to the average than ++ * the previous sample, we take the previous sample as an excursion ++ * and overwrite it in both the running average and summing average. ++ */ ++ ++ if (ts.flag_previous_exceeded_threshold) ++ /* new one closer to "nonconformist" previous, or average? ++ * Pythagoras? Who? Don't need it because large excursion ++ * will be accounted for correctly this way ++ */ ++ if ((abs(x - scaled_avg_x) + abs(y - scaled_avg_y)) < ++ (abs(x - ts.raw_sample_fifo[(ts.head_raw_fifo - 1) & ++ (ts.extent - 1)].x) + ++ abs(y - ts.raw_sample_fifo[(ts.head_raw_fifo - 1) & ++ (ts.extent - 1)].y))) { ++ /* it's closer to average, reject previous as a one- ++ * shot excursion, by overwriting it ++ */ ++ ts.xp += x - ts.raw_sample_fifo[(ts.head_raw_fifo - 1) & ++ (ts.extent - 1)].x; ++ ts.yp += y - ts.raw_sample_fifo[(ts.head_raw_fifo - 1) & ++ (ts.extent - 1)].y; ++ ts.raw_sample_fifo[(ts.head_raw_fifo - 1) & ++ (ts.extent - 1)].x = x; ++ ts.raw_sample_fifo[(ts.head_raw_fifo - 1) & ++ (ts.extent - 1)].y = y; ++ /* no new sample: replaced previous, so we are done */ ++ goto completed; ++ } ++ /* else it was closer to nonconformist previous: it's likely ++ * a genuine consistent move then. ++ * Keep previous and add new guy. ++ */ ++ ++ if ((x >= scaled_avg_x - ts.reject_threshold_vs_avg) && ++ (x <= scaled_avg_x + ts.reject_threshold_vs_avg) && ++ (y >= scaled_avg_y - ts.reject_threshold_vs_avg) && ++ (y <= scaled_avg_y + ts.reject_threshold_vs_avg)) ++ ts.flag_previous_exceeded_threshold = 0; ++ else ++ ts.flag_previous_exceeded_threshold = 1; + +- ts.xp += data0 & S3C2410_ADCDAT0_XPDATA_MASK; +- ts.yp += data1 & S3C2410_ADCDAT1_YPDATA_MASK; ++ /* accepted */ ++ ts.xp += x; ++ ts.yp += y; + ts.count++; + +- if (ts.count < (1<<ts.shift)) { +- writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST, base_addr+S3C2410_ADCTSC); +- writel(readl(base_addr+S3C2410_ADCCON) | S3C2410_ADCCON_ENABLE_START, base_addr+S3C2410_ADCCON); +- } else { +- mod_timer(&touch_timer, jiffies+1); ++ /* remove oldest sample from avg when we have full pipeline */ ++ if (((ts.head_raw_fifo + 1) & (ts.extent - 1)) == ts.tail_raw_fifo) { ++ ts.raw_running_avg.x -= ts.raw_sample_fifo[ts.tail_raw_fifo].x; ++ ts.raw_running_avg.y -= ts.raw_sample_fifo[ts.tail_raw_fifo].y; ++ ts.tail_raw_fifo = (ts.tail_raw_fifo + 1) & (ts.extent - 1); ++ } ++ /* always add current sample to fifo and average */ ++ ts.raw_sample_fifo[ts.head_raw_fifo].x = x; ++ ts.raw_sample_fifo[ts.head_raw_fifo].y = y; ++ ts.raw_running_avg.x += x; ++ ts.raw_running_avg.y += y; ++ ts.head_raw_fifo = (ts.head_raw_fifo + 1) & (ts.extent - 1); ++ ++completed: ++ if (ts.count >= (1 << ts.shift)) { ++ mod_timer(&touch_timer, jiffies + 1); + writel(WAIT4INT(1), base_addr+S3C2410_ADCTSC); ++ goto bail; + } + ++ writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST, ++ base_addr+S3C2410_ADCTSC); ++ writel(readl(base_addr+S3C2410_ADCCON) | ++ S3C2410_ADCCON_ENABLE_START, base_addr+S3C2410_ADCCON); ++ ++bail: + return IRQ_HANDLED; + } + +@@ -213,11 +326,11 @@ static int __init s3c2410ts_probe(struct platform_device *pdev) + struct s3c2410_ts_mach_info *info; + struct input_dev *input_dev; + +- info = ( struct s3c2410_ts_mach_info *)pdev->dev.platform_data; ++ info = (struct s3c2410_ts_mach_info *)pdev->dev.platform_data; + + if (!info) + { +- printk(KERN_ERR "Hm... too bad : no platform data for ts\n"); ++ dev_err(&pdev->dev, "Hm... too bad: no platform data for ts\n"); + return -EINVAL; + } + +@@ -227,7 +340,7 @@ static int __init s3c2410ts_probe(struct platform_device *pdev) + + adc_clock = clk_get(NULL, "adc"); + if (!adc_clock) { +- printk(KERN_ERR "failed to get adc clock source\n"); ++ dev_err(&pdev->dev, "failed to get adc clock source\n"); + return -ENOENT; + } + clk_enable(adc_clock); +@@ -238,7 +351,7 @@ static int __init s3c2410ts_probe(struct platform_device *pdev) + + base_addr = ioremap(S3C2410_PA_ADC,0x20); + if (base_addr == NULL) { +- printk(KERN_ERR "Failed to remap register block\n"); ++ dev_err(&pdev->dev, "Failed to remap register block\n"); + return -ENOMEM; + } + +@@ -247,25 +360,26 @@ static int __init s3c2410ts_probe(struct platform_device *pdev) + if (!strcmp(pdev->name, "s3c2410-ts")) + s3c2410_ts_connect(); + +- if ((info->presc&0xff) > 0) +- writel(S3C2410_ADCCON_PRSCEN | S3C2410_ADCCON_PRSCVL(info->presc&0xFF),\ +- base_addr+S3C2410_ADCCON); ++ if ((info->presc & 0xff) > 0) ++ writel(S3C2410_ADCCON_PRSCEN | ++ S3C2410_ADCCON_PRSCVL(info->presc&0xFF), ++ base_addr + S3C2410_ADCCON); + else +- writel(0,base_addr+S3C2410_ADCCON); ++ writel(0, base_addr+S3C2410_ADCCON); + + + /* Initialise registers */ +- if ((info->delay&0xffff) > 0) +- writel(info->delay & 0xffff, base_addr+S3C2410_ADCDLY); ++ if ((info->delay & 0xffff) > 0) ++ writel(info->delay & 0xffff, base_addr + S3C2410_ADCDLY); + +- writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC); ++ writel(WAIT4INT(0), base_addr + S3C2410_ADCTSC); + + /* Initialise input stuff */ + memset(&ts, 0, sizeof(struct s3c2410ts)); + input_dev = input_allocate_device(); + + if (!input_dev) { +- printk(KERN_ERR "Unable to allocate the input device !!\n"); ++ dev_err(&pdev->dev, "Unable to allocate the input device\n"); + return -ENOMEM; + } + +@@ -285,23 +399,30 @@ static int __init s3c2410ts_probe(struct platform_device *pdev) + ts.dev->id.version = S3C2410TSVERSION; + + ts.shift = info->oversampling_shift; ++ ts.extent = 1 << info->oversampling_shift; ++ ts.reject_threshold_vs_avg = info->reject_threshold_vs_avg; ++ ts.excursion_filter_len = 1 << info->excursion_filter_len_bits; ++ ++ ts.raw_sample_fifo = kmalloc(sizeof(struct s3c2410ts_sample) * ++ ts.excursion_filter_len, GFP_KERNEL); ++ clear_raw_fifo(); + + /* Get irqs */ + if (request_irq(IRQ_ADC, stylus_action, IRQF_SAMPLE_RANDOM, +- "s3c2410_action", ts.dev)) { +- printk(KERN_ERR "s3c2410_ts.c: Could not allocate ts IRQ_ADC !\n"); ++ "s3c2410_action", ts.dev)) { ++ dev_err(&pdev->dev, "Could not allocate ts IRQ_ADC !\n"); + iounmap(base_addr); + return -EIO; + } + if (request_irq(IRQ_TC, stylus_updown, IRQF_SAMPLE_RANDOM, + "s3c2410_action", ts.dev)) { +- printk(KERN_ERR "s3c2410_ts.c: Could not allocate ts IRQ_TC !\n"); ++ dev_err(&pdev->dev, "Could not allocate ts IRQ_TC !\n"); + free_irq(IRQ_ADC, ts.dev); + iounmap(base_addr); + return -EIO; + } + +- printk(KERN_INFO "%s successfully loaded\n", s3c2410ts_name); ++ dev_info(&pdev->dev, "successfully loaded\n"); + + /* All went ok, so register to the input system */ + rc = input_register_device(ts.dev); +@@ -329,6 +450,8 @@ static int s3c2410ts_remove(struct platform_device *pdev) + adc_clock = NULL; + } + ++ kfree(ts.raw_sample_fifo); ++ + input_unregister_device(ts.dev); + iounmap(base_addr); + +@@ -358,17 +481,20 @@ static int s3c2410ts_resume(struct platform_device *pdev) + clk_enable(adc_clock); + mdelay(1); + ++ clear_raw_fifo(); ++ + enable_irq(IRQ_ADC); + enable_irq(IRQ_TC); + + if ((info->presc&0xff) > 0) +- writel(S3C2410_ADCCON_PRSCEN | S3C2410_ADCCON_PRSCVL(info->presc&0xFF),\ +- base_addr+S3C2410_ADCCON); ++ writel(S3C2410_ADCCON_PRSCEN | ++ S3C2410_ADCCON_PRSCVL(info->presc&0xFF), ++ base_addr+S3C2410_ADCCON); + else + writel(0,base_addr+S3C2410_ADCCON); + + /* Initialise registers */ +- if ((info->delay&0xffff) > 0) ++ if ((info->delay & 0xffff) > 0) + writel(info->delay & 0xffff, base_addr+S3C2410_ADCDLY); + + writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC); +diff --git a/include/asm-arm/arch-s3c2410/ts.h b/include/asm-arm/arch-s3c2410/ts.h +index 593632a..44c1e4b 100644 +--- a/include/asm-arm/arch-s3c2410/ts.h ++++ b/include/asm-arm/arch-s3c2410/ts.h +@@ -17,9 +17,11 @@ + #define __ASM_ARM_TS_H + + struct s3c2410_ts_mach_info { +- int delay; +- int presc; +- int oversampling_shift; ++ int delay; ++ int presc; ++ int oversampling_shift; ++ int excursion_filter_len_bits; ++ int reject_threshold_vs_avg; + }; + + void set_s3c2410ts_info(struct s3c2410_ts_mach_info *hard_s3c2410ts_info); +-- +1.5.6.5 + |