1 files changed, 0 insertions, 121 deletions
diff --git a/target/linux/sunxi/patches-3.12/105-clk-sunxi_mod0.patch b/target/linux/sunxi/patches-3.12/105-clk-sunxi_mod0.patch
deleted file mode 100644
index bbb8057..0000000
--- a/target/linux/sunxi/patches-3.12/105-clk-sunxi_mod0.patch
+++ /dev/null
@@ -1,121 +0,0 @@
-From 3473e6acea4bd01ba2b334628970390207f9f4fd Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
-Date: Tue, 21 May 2013 21:25:05 -0300
-Subject: [PATCH] clk: sunxi: mod0 support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This commit implements support for the "module 0" type of clocks, as
-used by MMC, IR, NAND, SATA and other components.
-
-Signed-off-by: Emilio López <emilio@elopez.com.ar>
----
- Documentation/devicetree/bindings/clock/sunxi.txt |  1 +
- drivers/clk/sunxi/clk-sunxi.c                     | 57 +++++++++++++++++++++++
- 2 files changed, 58 insertions(+)
-
-diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
-index 773f3ae..ff3f61c 100644
---- a/Documentation/devicetree/bindings/clock/sunxi.txt
-+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
-@@ -35,6 +35,7 @@ Required properties:
- 	"allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20
- 	"allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
- 	"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
-+	"allwinner,sun4i-mod0-clk" - for the module 0 family of clocks
- 
- Required properties for all clocks:
- - reg : shall be the control register address for the clock.
-diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
-index 6947ba9..96c01b2 100644
---- a/drivers/clk/sunxi/clk-sunxi.c
-+++ b/drivers/clk/sunxi/clk-sunxi.c
-@@ -287,6 +287,47 @@ static void sun4i_get_apb1_factors(u32 *freq, u32 parent_rate,
- 
- 
- /**
-+ * sun4i_get_mod0_factors() - calculates m, n factors for MOD0-style clocks
-+ * MMC rate is calculated as follows
-+ * rate = (parent_rate >> p) / (m + 1);
-+ */
-+
-+static void sun4i_get_mod0_factors(u32 *freq, u32 parent_rate,
-+				   u8 *n, u8 *k, u8 *m, u8 *p)
-+{
-+	u8 div, calcm, calcp;
-+
-+	/* These clocks can only divide, so we will never be able to achieve
-+	 * frequencies higher than the parent frequency */
-+	if (*freq > parent_rate)
-+		*freq = parent_rate;
-+
-+	div = parent_rate / *freq;
-+
-+	if (div < 16)
-+		calcp = 0;
-+	else if (div / 2 < 16)
-+		calcp = 1;
-+	else if (div / 4 < 16)
-+		calcp = 2;
-+	else
-+		calcp = 3;
-+
-+	calcm = DIV_ROUND_UP(div, 1 << calcp);
-+
-+	*freq = (parent_rate >> calcp) / calcm;
-+
-+	/* we were called to round the frequency, we can now return */
-+	if (n == NULL)
-+		return;
-+
-+	*m = calcm - 1;
-+	*p = calcp;
-+}
-+
-+
-+
-+/**
-  * sunxi_factors_clk_setup() - Setup function for factor clocks
-  */
- 
-@@ -333,6 +374,14 @@ struct factors_data {
- 	.pwidth = 2,
- };
- 
-+/* user manual says "n" but it's really "p" */
-+static struct clk_factors_config sun4i_mod0_config = {
-+	.mshift = 0,
-+	.mwidth = 4,
-+	.pshift = 16,
-+	.pwidth = 2,
-+};
-+
- static const struct factors_data sun4i_pll1_data __initconst = {
- 	.enable = 31,
- 	.table = &sun4i_pll1_config,
-@@ -356,6 +405,13 @@ struct factors_data {
- 	.getter = sun4i_get_apb1_factors,
- };
- 
-+static const struct factors_data sun4i_mod0_data __initconst = {
-+	.enable = 31,
-+	.mux = 24,
-+	.table = &sun4i_mod0_config,
-+	.getter = sun4i_get_mod0_factors,
-+};
-+
- static struct clk * __init sunxi_factors_clk_setup(struct device_node *node,
- 						const struct factors_data *data)
- {
-@@ -779,6 +835,7 @@ static void __init sunxi_divs_clk_setup(struct device_node *node,
- 	{.compatible = "allwinner,sun4i-pll1-clk", .data = &sun4i_pll1_data,},
- 	{.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,},
- 	{.compatible = "allwinner,sun4i-apb1-clk", .data = &sun4i_apb1_data,},
-+	{.compatible = "allwinner,sun4i-mod0-clk", .data = &sun4i_mod0_data,},
- 	{}
- };
- 
--- 
-1.8.4
-