diff options
Diffstat (limited to 'target/linux/sunxi/patches-3.14/107-dt-sun4i-add-a10-lime.patch')
| -rw-r--r-- | target/linux/sunxi/patches-3.14/107-dt-sun4i-add-a10-lime.patch | 149 |
1 files changed, 149 insertions, 0 deletions
diff --git a/target/linux/sunxi/patches-3.14/107-dt-sun4i-add-a10-lime.patch b/target/linux/sunxi/patches-3.14/107-dt-sun4i-add-a10-lime.patch new file mode 100644 index 0000000..c6f9edb --- /dev/null +++ b/target/linux/sunxi/patches-3.14/107-dt-sun4i-add-a10-lime.patch @@ -0,0 +1,149 @@ +From a1c70ed831e4d5356618834202b0da3aa34e218e Mon Sep 17 00:00:00 2001 +From: Hans de Goede <hdegoede@redhat.com> +Date: Fri, 10 Jan 2014 23:23:06 +0100 +Subject: [PATCH] ARM: sun4i: dt: Add support for the A10-OLinuXino-LIME board + +This add support for the A10-OLinuXino-LIME: +https://www.olimex.com/Products/OLinuXino/A10/A10-OLinuXino-LIME + +A low cost Allwinner A10 based dev-board, with sata, ethernet, hdmi and 2x USB. + +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 111 +++++++++++++++++++++++++ + 2 files changed, 112 insertions(+) + create mode 100644 arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts + +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index 8e1d636..66d6df3 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -284,6 +284,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \ + sun4i-a10-cubieboard.dtb \ + sun4i-a10-mini-xplus.dtb \ + sun4i-a10-hackberry.dtb \ ++ sun4i-a10-olinuxino-lime.dtb \ + sun4i-a10-pcduino.dtb \ + sun5i-a10s-olinuxino-micro.dtb \ + sun5i-a13-olinuxino.dtb \ +diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +new file mode 100644 +index 0000000..66cf0c7 +--- /dev/null ++++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +@@ -0,0 +1,111 @@ ++/* ++ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com> ++ * ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++/dts-v1/; ++/include/ "sun4i-a10.dtsi" ++/include/ "sunxi-common-regulators.dtsi" ++ ++/ { ++ model = "Olimex A10-OLinuXino-LIME"; ++ compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10"; ++ ++ soc@01c00000 { ++ emac: ethernet@01c0b000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&emac_pins_a>; ++ phy = <&phy1>; ++ status = "okay"; ++ }; ++ ++ mdio@01c0b080 { ++ status = "okay"; ++ ++ phy1: ethernet-phy@1 { ++ reg = <1>; ++ }; ++ }; ++ ++ usbphy: phy@01c13400 { ++ usb1_vbus-supply = <®_usb1_vbus>; ++ usb2_vbus-supply = <®_usb2_vbus>; ++ status = "okay"; ++ }; ++ ++ ehci0: usb@01c14000 { ++ status = "okay"; ++ }; ++ ++ ohci0: usb@01c14400 { ++ status = "okay"; ++ }; ++ ++ ahci: sata@01c18000 { ++ target-supply = <®_ahci_5v>; ++ status = "okay"; ++ }; ++ ++ ehci1: usb@01c1c000 { ++ status = "okay"; ++ }; ++ ++ ohci1: usb@01c1c400 { ++ status = "okay"; ++ }; ++ ++ pinctrl@01c20800 { ++ ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { ++ allwinner,pins = "PC3"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ led_pins_olinuxinolime: led_pins@0 { ++ allwinner,pins = "PH2"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <1>; ++ allwinner,pull = <0>; ++ }; ++ }; ++ ++ uart0: serial@01c28000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins_a>; ++ status = "okay"; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&led_pins_olinuxinolime>; ++ ++ green { ++ label = "a10-olinuxino-lime:green:usr"; ++ gpios = <&pio 7 2 0>; ++ default-state = "on"; ++ }; ++ }; ++ ++ reg_ahci_5v: ahci-5v { ++ pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; ++ gpio = <&pio 2 3 0>; ++ status = "okay"; ++ }; ++ ++ reg_usb1_vbus: usb1-vbus { ++ status = "okay"; ++ }; ++ ++ reg_usb2_vbus: usb2-vbus { ++ status = "okay"; ++ }; ++}; +-- +2.0.3 + |