diff options
Diffstat (limited to 'target/linux/sunxi/patches-3.14/163-dt-sun4i-add-usb-host-to-boards.patch')
| -rw-r--r-- | target/linux/sunxi/patches-3.14/163-dt-sun4i-add-usb-host-to-boards.patch | 240 |
1 files changed, 0 insertions, 240 deletions
diff --git a/target/linux/sunxi/patches-3.14/163-dt-sun4i-add-usb-host-to-boards.patch b/target/linux/sunxi/patches-3.14/163-dt-sun4i-add-usb-host-to-boards.patch deleted file mode 100644 index ce78cb7..0000000 --- a/target/linux/sunxi/patches-3.14/163-dt-sun4i-add-usb-host-to-boards.patch +++ /dev/null @@ -1,240 +0,0 @@ -From f2509ec45a09013e300460a967f694561d169b98 Mon Sep 17 00:00:00 2001 -From: Hans de Goede <hdegoede@redhat.com> -Date: Sat, 11 Jan 2014 04:47:38 +0100 -Subject: [PATCH] ARM: sun4i: dt: Add USB host nodes to hackberry dts - -Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. - -Based on fex file settings, the fex file also contains a mysterious line: -usb_hub_vcc_en_gpio = port:PB09<1><0><default><0> - -Which also clashes with usbc0, which has: -usb_drv_vbus_gpio = port:PB09<1><0><default><0> - -So if usb does not work properly we need someone with a hackberry to look -closer into this. - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/sun4i-a10-hackberry.dts | 40 +++++++++++++++++++++++++++++++ - 1 file changed, 40 insertions(+) - ---- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts -+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts -@@ -13,6 +13,7 @@ - - /dts-v1/; - /include/ "sun4i-a10.dtsi" -+/include/ "sunxi-common-regulators.dtsi" - - / { - model = "Miniand Hackberry"; -@@ -35,6 +36,28 @@ - }; - }; - -+ usbphy: phy@01c13400 { -+ usb1_vbus-supply = <®_usb1_vbus>; -+ usb2_vbus-supply = <®_usb2_vbus>; -+ status = "okay"; -+ }; -+ -+ ehci0: usb@01c14000 { -+ status = "okay"; -+ }; -+ -+ ohci0: usb@01c14400 { -+ status = "okay"; -+ }; -+ -+ ehci1: usb@01c1c000 { -+ status = "okay"; -+ }; -+ -+ ohci1: usb@01c1c400 { -+ status = "okay"; -+ }; -+ - pio: pinctrl@01c20800 { - pinctrl-names = "default"; - pinctrl-0 = <&hackberry_hogs>; -@@ -45,6 +68,13 @@ - allwinner,drive = <0>; - allwinner,pull = <0>; - }; -+ -+ usb2_vbus_pin_hackberry: usb2_vbus_pin@0 { -+ allwinner,pins = "PH12"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; - }; - - uart0: serial@01c28000 { -@@ -66,4 +96,14 @@ - gpio = <&pio 7 19 0>; - }; - }; -+ -+ reg_usb1_vbus: usb1-vbus { -+ status = "okay"; -+ }; -+ -+ reg_usb2_vbus: usb2-vbus { -+ pinctrl-0 = <&usb2_vbus_pin_hackberry>; -+ gpio = <&pio 7 12 0>; -+ status = "okay"; -+ }; - }; ---- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts -+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts -@@ -13,16 +13,47 @@ - - /dts-v1/; - /include/ "sun4i-a10.dtsi" -+/include/ "sunxi-common-regulators.dtsi" - - / { - model = "PineRiver Mini X-Plus"; - compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10"; - - soc@01c00000 { -+ usbphy: phy@01c13400 { -+ usb1_vbus-supply = <®_usb1_vbus>; -+ usb2_vbus-supply = <®_usb2_vbus>; -+ status = "okay"; -+ }; -+ -+ ehci0: usb@01c14000 { -+ status = "okay"; -+ }; -+ -+ ohci0: usb@01c14400 { -+ status = "okay"; -+ }; -+ -+ ehci1: usb@01c1c000 { -+ status = "okay"; -+ }; -+ -+ ohci1: usb@01c1c400 { -+ status = "okay"; -+ }; -+ - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - }; -+ -+ reg_usb1_vbus: usb1-vbus { -+ status = "okay"; -+ }; -+ -+ reg_usb2_vbus: usb2-vbus { -+ status = "okay"; -+ }; - }; ---- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts -+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts -@@ -12,6 +12,7 @@ - - /dts-v1/; - /include/ "sun4i-a10.dtsi" -+/include/ "sunxi-common-regulators.dtsi" - - / { - model = "LinkSprite pcDuino"; -@@ -33,6 +34,28 @@ - }; - }; - -+ usbphy: phy@01c13400 { -+ usb1_vbus-supply = <®_usb1_vbus>; -+ usb2_vbus-supply = <®_usb2_vbus>; -+ status = "okay"; -+ }; -+ -+ ehci0: usb@01c14000 { -+ status = "okay"; -+ }; -+ -+ ohci0: usb@01c14400 { -+ status = "okay"; -+ }; -+ -+ ehci1: usb@01c1c000 { -+ status = "okay"; -+ }; -+ -+ ohci1: usb@01c1c400 { -+ status = "okay"; -+ }; -+ - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; -@@ -45,4 +68,12 @@ - status = "okay"; - }; - }; -+ -+ reg_usb1_vbus: usb1-vbus { -+ status = "okay"; -+ }; -+ -+ reg_usb2_vbus: usb2-vbus { -+ status = "okay"; -+ }; - }; ---- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -@@ -34,11 +34,33 @@ - }; - }; - -+ usbphy: phy@01c13400 { -+ usb1_vbus-supply = <®_usb1_vbus>; -+ usb2_vbus-supply = <®_usb2_vbus>; -+ status = "okay"; -+ }; -+ -+ ehci0: usb@01c14000 { -+ status = "okay"; -+ }; -+ -+ ohci0: usb@01c14400 { -+ status = "okay"; -+ }; -+ - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; - -+ ehci1: usb@01c1c000 { -+ status = "okay"; -+ }; -+ -+ ohci1: usb@01c1c400 { -+ status = "okay"; -+ }; -+ - pinctrl@01c20800 { - led_pins_cubieboard: led_pins@0 { - allwinner,pins = "PH20", "PH21"; -@@ -87,4 +109,12 @@ - reg_ahci_5v: ahci-5v { - status = "okay"; - }; -+ -+ reg_usb1_vbus: usb1-vbus { -+ status = "okay"; -+ }; -+ -+ reg_usb2_vbus: usb2-vbus { -+ status = "okay"; -+ }; - }; |