summaryrefslogtreecommitdiff
path: root/target/linux/sunxi/patches-4.4/104-2-dt-sun8i-add-orangepi-plus.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/sunxi/patches-4.4/104-2-dt-sun8i-add-orangepi-plus.patch')
-rw-r--r--target/linux/sunxi/patches-4.4/104-2-dt-sun8i-add-orangepi-plus.patch111
1 files changed, 0 insertions, 111 deletions
diff --git a/target/linux/sunxi/patches-4.4/104-2-dt-sun8i-add-orangepi-plus.patch b/target/linux/sunxi/patches-4.4/104-2-dt-sun8i-add-orangepi-plus.patch
deleted file mode 100644
index 67094a4..0000000
--- a/target/linux/sunxi/patches-4.4/104-2-dt-sun8i-add-orangepi-plus.patch
+++ /dev/null
@@ -1,111 +0,0 @@
-From dfcf8196de7411a5e7fd49795938b1bc8c56859c Mon Sep 17 00:00:00 2001
-From: Jens Kuske <jenskuske@gmail.com>
-Date: Fri, 4 Dec 2015 22:24:43 +0100
-Subject: [PATCH] ARM: dts: sun8i: Add Orange Pi Plus support
-
-The Orange Pi Plus is a SBC based on the Allwinner H3 SoC
-with 8GB eMMC, multiple USB ports through a USB hub chip, SATA through
-a USB-SATA bridge, one uSD slot, a 10/100/1000M ethernet port,
-WiFi, HDMI, headphone jack, IR receiver, a microphone, a CSI connector
-and a 40-pin GPIO header.
-
-Signed-off-by: Jens Kuske <jenskuske@gmail.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/Makefile | 3 +-
- arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 77 ++++++++++++++++++++++++++++
- 2 files changed, 79 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -660,7 +660,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
- sun8i-a33-ga10h-v1.1.dtb \
- sun8i-a33-ippo-q8h-v1.2.dtb \
- sun8i-a33-q8-tablet.dtb \
-- sun8i-a33-sinlinx-sina33.dtb
-+ sun8i-a33-sinlinx-sina33.dtb \
-+ sun8i-h3-orangepi-plus.dtb
- dtb-$(CONFIG_MACH_SUN9I) += \
- sun9i-a80-optimus.dtb \
- sun9i-a80-cubieboard4.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
-@@ -0,0 +1,77 @@
-+/*
-+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include "sun8i-h3.dtsi"
-+#include "sunxi-common-regulators.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
-+
-+/ {
-+ model = "Xunlong Orange Pi Plus";
-+ compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+};
-+
-+&mmc0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
-+ vmmc-supply = <&reg_vcc3v3>;
-+ bus-width = <4>;
-+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
-+ cd-inverted;
-+ status = "okay";
-+};
-+
-+&uart0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins_a>;
-+ status = "okay";
-+};