diff options
Diffstat (limited to 'target/linux/sunxi')
83 files changed, 0 insertions, 18234 deletions
diff --git a/target/linux/sunxi/config-3.18 b/target/linux/sunxi/config-3.18 deleted file mode 100644 index bdfe88a..0000000 --- a/target/linux/sunxi/config-3.18 +++ /dev/null @@ -1,477 +0,0 @@ -CONFIG_ADVISE_SYSCALLS=y -# CONFIG_AHCI_SUNXI is not set -CONFIG_ALIGNMENT_TRAP=y -# CONFIG_APM_EMULATION is not set -CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y -CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -CONFIG_ARCH_HAS_RESET_CONTROLLER=y -CONFIG_ARCH_HAS_SG_CHAIN=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MULTIPLATFORM=y -# CONFIG_ARCH_MULTI_CPU_AUTO is not set -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_NR_GPIO=416 -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -CONFIG_ARCH_SUNXI=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -CONFIG_ARM=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y -# CONFIG_ARM_CPU_SUSPEND is not set -CONFIG_ARM_ERRATA_430973=y -CONFIG_ARM_ERRATA_720789=y -CONFIG_ARM_ERRATA_754322=y -CONFIG_ARM_ERRATA_775420=y -CONFIG_ARM_GIC=y -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -# CONFIG_ARM_LPAE is not set -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_PSCI=y -CONFIG_ARM_THUMB=y -# CONFIG_ARM_THUMBEE is not set -CONFIG_ARM_VIRT_EXT=y -CONFIG_ATA=y -CONFIG_ATAGS=y -# CONFIG_ATA_SFF is not set -CONFIG_AUDIT=y -# CONFIG_AUDITSYSCALL is not set -CONFIG_AUDIT_GENERIC=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_AVERAGE=y -CONFIG_B53=y -# CONFIG_B53_MMAP_DRIVER is not set -CONFIG_B53_PHY_DRIVER=y -CONFIG_B53_PHY_FIXUP=y -# CONFIG_B53_SRAB_DRIVER is not set -CONFIG_BINFMT_MISC=y -CONFIG_BLK_CGROUP=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_BOUNCE=y -# CONFIG_BPF_SYSCALL is not set -CONFIG_BUILD_BIN2C=y -# CONFIG_CACHE_L2X0 is not set -CONFIG_CFQ_GROUP_IOSCHED=y -CONFIG_CGROUPS=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CGROUP_FREEZER=y -# CONFIG_CGROUP_NET_CLASSID is not set -# CONFIG_CGROUP_PERF is not set -# CONFIG_CGROUP_SCHED is not set -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLKSRC_OF=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk rootwait root=/dev/mmcblk0p2" -CONFIG_CMDLINE_FORCE=y -CONFIG_COMMON_CLK=y -CONFIG_COMPACTION=y -CONFIG_CONFIGFS_FS=y -CONFIG_CONNECTOR=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_COREDUMP=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_CPUSETS=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_HAS_ASID=y -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -CONFIG_CRC_T10DIF=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CRCT10DIF=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_DEV_SUNXI_SS=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_DCACHE_WORD_ACCESS=y -# CONFIG_DEBUG_BLK_CGROUP is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -CONFIG_DEBUG_MEMORY_INIT=y -# CONFIG_DEBUG_UART_8250 is not set -# CONFIG_DEBUG_UART_PL01X is not set -# CONFIG_DEBUG_USER is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_DIRECT_IO=y -CONFIG_DMADEVICES=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_OF=y -CONFIG_DMA_SUN6I=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DNOTIFY=y -CONFIG_DTC=y -CONFIG_DUMMY_CONSOLE=y -CONFIG_DWMAC_SUNXI=y -# CONFIG_DW_DMAC_CORE is not set -CONFIG_DYNAMIC_DEBUG=y -# CONFIG_EEPROM_SUNXI_SID is not set -CONFIG_ELF_CORE=y -# CONFIG_EMAC_ROCKCHIP is not set -# CONFIG_EMBEDDED is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -CONFIG_EXT4_FS=y -CONFIG_FRAME_POINTER=y -CONFIG_FRAME_WARN=2048 -CONFIG_FREEZER=y -CONFIG_FS_MBCACHE=y -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GLOB=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_DEVRES=y -CONFIG_GPIO_SYSFS=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_ARM_ARCH_TIMER=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_BPF_JIT=y -CONFIG_HAVE_CC_STACKPROTECTOR=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_HW_BREAKPOINT=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_LZ4=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_SMP=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HIGHMEM=y -# CONFIG_HIGHPTE is not set -CONFIG_HWMON=y -CONFIG_HW_CONSOLE=y -CONFIG_HZ_FIXED=0 -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_MUX=y -# CONFIG_I2C_MUX_GPIO is not set -# CONFIG_I2C_MUX_PCA9541 is not set -# CONFIG_I2C_MUX_PCA954x is not set -CONFIG_I2C_MUX_PINCTRL=y -CONFIG_I2C_MV64XXX=y -# CONFIG_I2C_SUN6I_P2WI is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INPUT=y -# CONFIG_INPUT_AXP20X_PEK is not set -CONFIG_INPUT_KEYBOARD=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_IOMMU_HELPER=y -CONFIG_IOSCHED_CFQ=y -CONFIG_IPC_NS=y -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_JBD2=y -CONFIG_KALLSYMS=y -# CONFIG_KEYBOARD_GPIO is not set -CONFIG_KEYBOARD_SUN4I_LRADC=y -CONFIG_KSM=y -CONFIG_LEDS_GPIO=y -# CONFIG_LEDS_REGULATOR is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -CONFIG_LIBFDT=y -CONFIG_LOG_BUF_SHIFT=19 -CONFIG_LZ4_DECOMPRESS=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MACH_SUN4I=y -CONFIG_MACH_SUN5I=y -CONFIG_MACH_SUN6I=y -CONFIG_MACH_SUN7I=y -# CONFIG_MACH_SUN8I is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_MDIO_BOARDINFO=y -CONFIG_MDIO_SUN4I=y -# CONFIG_MEMCG is not set -CONFIG_MFD_AXP20X=y -CONFIG_MFD_CORE=y -CONFIG_MFD_SUN6I_PRCM=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGHT_HAVE_PCI=y -CONFIG_MIGRATION=y -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -# CONFIG_MMC_BLOCK_BOUNCE is not set -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_SUNXI=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MULTI_IRQ_HANDLER=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_NAMESPACES=y -CONFIG_NEED_DMA_MAP_STATE=y -# CONFIG_NEON is not set -# CONFIG_NET_CLS_CGROUP is not set -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_NS=y -CONFIG_NET_PTP_CLASSIFY=y -CONFIG_NET_VENDOR_ALLWINNER=y -CONFIG_NLS=y -CONFIG_NO_BOOTMEM=y -CONFIG_NO_HZ=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_NR_CPUS=4 -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_MDIO=y -CONFIG_OF_MTD=y -CONFIG_OF_NET=y -CONFIG_OF_RESERVED_MEM=y -CONFIG_OF_TOUCHSCREEN=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PAGE_OFFSET=0xC0000000 -# CONFIG_PARTITION_ADVANCED is not set -# CONFIG_PCI is not set -# CONFIG_PCI_SYSCALL is not set -CONFIG_PERF_EVENTS=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PHYLIB=y -CONFIG_PHY_SUN4I_USB=y -CONFIG_PID_NS=y -CONFIG_PINCTRL=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_PINCTRL_SUN4I_A10=y -CONFIG_PINCTRL_SUN5I_A10S=y -CONFIG_PINCTRL_SUN5I_A13=y -CONFIG_PINCTRL_SUN6I_A31=y -CONFIG_PINCTRL_SUN6I_A31_R=y -CONFIG_PINCTRL_SUN7I_A20=y -# CONFIG_PINCTRL_SUN8I_A23 is not set -# CONFIG_PINCTRL_SUN8I_A23_R is not set -CONFIG_PINCTRL_SUNXI_COMMON=y -CONFIG_PM=y -CONFIG_PM_CLK=y -# CONFIG_PM_DEBUG is not set -CONFIG_PM_RUNTIME=y -CONFIG_POWER_SUPPLY=y -CONFIG_PPS=y -CONFIG_PREEMPT=y -CONFIG_PREEMPT_COUNT=y -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_RCU=y -CONFIG_PRINTK_TIME=y -# CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_PROC_EVENTS=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_PROC_PID_CPUSET=y -CONFIG_PTP_1588_CLOCK=y -CONFIG_PWM=y -# CONFIG_PWM_FSL_FTM is not set -CONFIG_PWM_SUN4I=y -CONFIG_PWM_SYSFS=y -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -CONFIG_QUOTA=y -CONFIG_QUOTACTL=y -CONFIG_QUOTA_NETLINK_INTERFACE=y -# CONFIG_RCU_BOOST is not set -CONFIG_RCU_CPU_STALL_VERBOSE=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_IRQ=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_AXP20X=y -# CONFIG_REGULATOR_DEBUG is not set -CONFIG_REGULATOR_FIXED_VOLTAGE=y -# CONFIG_REGULATOR_PWM is not set -# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set -CONFIG_RELAY=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RESOURCE_COUNTERS=y -# CONFIG_RFKILL_REGULATOR is not set -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_SATA_AHCI_PLATFORM=y -CONFIG_SCHED_HRTICK=y -CONFIG_SCSI=y -CONFIG_SDIO_UART=y -# CONFIG_SECCOMP is not set -CONFIG_SECURITYFS=y -# CONFIG_SENSORS_PWM_FAN is not set -CONFIG_SERIAL_8250_DW=y -CONFIG_SERIAL_8250_NR_UARTS=8 -CONFIG_SERIAL_8250_RUNTIME_UARTS=8 -CONFIG_SERIO=y -# CONFIG_SERIO_APBPS2 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -CONFIG_SLUB_CPU_PARTIAL=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLUB_DEBUG_ON is not set -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_SUN4I=y -CONFIG_SPI_SUN6I=y -# CONFIG_STAGING is not set -# CONFIG_STMMAC_DA is not set -# CONFIG_STMMAC_DEBUG_FS is not set -CONFIG_STMMAC_ETH=y -CONFIG_STMMAC_PLATFORM=y -CONFIG_STOP_MACHINE=y -CONFIG_STRICT_DEVMEM=y -# CONFIG_SUN4I_EMAC is not set -CONFIG_SUN4I_TIMER=y -CONFIG_SUN5I_HSTIMER=y -CONFIG_SUNXI_WATCHDOG=y -CONFIG_SWCONFIG=y -CONFIG_SWIOTLB=y -CONFIG_SWP_EMULATE=y -CONFIG_SYSFS_SYSCALL=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_TASKSTATS=y -CONFIG_TASK_DELAY_ACCT=y -CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_TASK_XACCT=y -# CONFIG_THUMB2_KERNEL is not set -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_TOUCHSCREEN_SUN4I=y -CONFIG_TREE_PREEMPT_RCU=y -CONFIG_UEVENT_HELPER_PATH="" -CONFIG_UID16=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_UNINLINE_SPIN_UNLOCK=y -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_COMMON=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_HCD_PLATFORM=y -CONFIG_USB_NET_DRIVERS=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PLATFORM=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SUPPORT=y -CONFIG_USELIB=y -# CONFIG_USER_NS is not set -CONFIG_USE_OF=y -CONFIG_UTS_NS=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_WATCHDOG_CORE=y -# CONFIG_XEN is not set -CONFIG_XFRM_ALGO=y -CONFIG_XFRM_USER=y -CONFIG_XPS=y -CONFIG_XZ_DEC_ARM=y -# CONFIG_XZ_DEC_ARMTHUMB is not set -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_ZBOOT_ROM_TEXT=0 -CONFIG_ZLIB_INFLATE=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/sunxi/config-4.1 b/target/linux/sunxi/config-4.1 deleted file mode 100644 index d083a59..0000000 --- a/target/linux/sunxi/config-4.1 +++ /dev/null @@ -1,560 +0,0 @@ -CONFIG_ADVISE_SYSCALLS=y -# CONFIG_AHCI_SUNXI is not set -CONFIG_ALIGNMENT_TRAP=y -# CONFIG_APM_EMULATION is not set -CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -CONFIG_ARCH_HAS_RESET_CONTROLLER=y -CONFIG_ARCH_HAS_SG_CHAIN=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MULTIPLATFORM=y -# CONFIG_ARCH_MULTI_CPU_AUTO is not set -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_NR_GPIO=416 -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -CONFIG_ARCH_SUNXI=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -CONFIG_ARM=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y -CONFIG_ARM_CPU_SUSPEND=y -CONFIG_ARM_CRYPTO=y -CONFIG_ARM_GIC=y -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -# CONFIG_ARM_LPAE is not set -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_PSCI=y -CONFIG_ARM_THUMB=y -# CONFIG_ARM_THUMBEE is not set -CONFIG_ARM_UNWIND=y -CONFIG_ARM_VIRT_EXT=y -CONFIG_ATA=y -CONFIG_ATAGS=y -# CONFIG_ATA_SFF is not set -CONFIG_AUDIT=y -# CONFIG_AUDITSYSCALL is not set -CONFIG_AUDIT_GENERIC=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_AVERAGE=y -CONFIG_B53=y -# CONFIG_B53_MMAP_DRIVER is not set -CONFIG_B53_PHY_DRIVER=y -CONFIG_B53_PHY_FIXUP=y -# CONFIG_B53_SRAB_DRIVER is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GENERIC=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_PWM=y -CONFIG_BINFMT_MISC=y -CONFIG_BLK_CGROUP=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_BOUNCE=y -# CONFIG_BPF_SYSCALL is not set -CONFIG_BUILD_BIN2C=y -CONFIG_CACHE_L2X0=y -CONFIG_CFQ_GROUP_IOSCHED=y -CONFIG_CGROUPS=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CGROUP_FREEZER=y -# CONFIG_CGROUP_NET_CLASSID is not set -# CONFIG_CGROUP_PERF is not set -# CONFIG_CGROUP_SCHED is not set -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLKSRC_OF=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk rootwait root=/dev/mmcblk0p2" -CONFIG_CMDLINE_FORCE=y -CONFIG_COMMON_CLK=y -CONFIG_COMPACTION=y -CONFIG_CONFIGFS_FS=y -CONFIG_CONNECTOR=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_COREDUMP=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_CPUFREQ_DT=y -CONFIG_CPUSETS=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_FREQ=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_HAS_ASID=y -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_PM=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_THERMAL=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -CONFIG_CRC_T10DIF=y -CONFIG_CRYPTO_ABLK_HELPER=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_AES_ARM=y -CONFIG_CRYPTO_AES_ARM_CE=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CRCT10DIF=y -CONFIG_CRYPTO_CRYPTD=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_DEV_SUN4I_SS=y -CONFIG_CRYPTO_GHASH_ARM_CE=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA1_ARM=y -CONFIG_CRYPTO_SHA1_ARM_CE=y -CONFIG_CRYPTO_SHA1_ARM_NEON=y -CONFIG_CRYPTO_SHA256_ARM=y -CONFIG_CRYPTO_SHA2_ARM_CE=y -CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_SHA512_ARM_NEON=y -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_DCACHE_WORD_ACCESS=y -# CONFIG_DEBUG_BLK_CGROUP is not set -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -CONFIG_DEBUG_MEMORY_INIT=y -# CONFIG_DEBUG_UART_8250 is not set -# CONFIG_DEBUG_USER is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_DIRECT_IO=y -CONFIG_DMADEVICES=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_OF=y -CONFIG_DMA_SUN6I=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DNOTIFY=y -CONFIG_DTC=y -CONFIG_DUMMY_CONSOLE=y -CONFIG_DYNAMIC_DEBUG=y -# CONFIG_EEPROM_SUNXI_SID is not set -CONFIG_ELF_CORE=y -# CONFIG_EMBEDDED is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -CONFIG_EXT4_FS=y -CONFIG_FB=y -# CONFIG_FB_BIG_ENDIAN is not set -CONFIG_FB_BOTH_ENDIAN=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_CMDLINE=y -CONFIG_FB_FOREIGN_ENDIAN=y -# CONFIG_FB_LITTLE_ENDIAN is not set -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_SIMPLE=y -CONFIG_FB_TILEBLITTING=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x16=y -CONFIG_FONT_8x8=y -CONFIG_FONT_SUPPORT=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FRAME_WARN=2048 -CONFIG_FREEZER=y -CONFIG_FS_MBCACHE=y -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GLOB=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_DEVRES=y -CONFIG_GPIO_SYSFS=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_HAVE_ARCH_BITREVERSE=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_ARM_ARCH_TIMER=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_BPF_JIT=y -CONFIG_HAVE_CC_STACKPROTECTOR=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_HW_BREAKPOINT=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_LZ4=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_SMP=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HIGHMEM=y -CONFIG_HIGHPTE=y -CONFIG_HOTPLUG_CPU=y -CONFIG_HWMON=y -CONFIG_HW_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_TIMERIOMEM=y -CONFIG_HZ_FIXED=0 -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_COMPAT=y -CONFIG_I2C_HELPER_AUTO=y -CONFIG_I2C_MV64XXX=y -# CONFIG_I2C_SUN6I_P2WI is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INPUT=y -CONFIG_INPUT_AXP20X_PEK=y -CONFIG_INPUT_KEYBOARD=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_IOMMU_HELPER=y -CONFIG_IOSCHED_CFQ=y -CONFIG_IPC_NS=y -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_JBD2=y -CONFIG_KALLSYMS=y -CONFIG_KEYBOARD_SUN4I_LRADC=y -CONFIG_KSM=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_LCD_PLATFORM=y -CONFIG_LEDS_GPIO=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -CONFIG_LIBFDT=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOG_BUF_SHIFT=19 -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MACH_SUN4I=y -CONFIG_MACH_SUN5I=y -CONFIG_MACH_SUN6I=y -CONFIG_MACH_SUN7I=y -CONFIG_MACH_SUN8I=y -CONFIG_MACH_SUN9I=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_MDIO_BOARDINFO=y -CONFIG_MDIO_SUN4I=y -# CONFIG_MEMCG is not set -CONFIG_MFD_AXP20X=y -CONFIG_MFD_CORE=y -CONFIG_MFD_SUN6I_PRCM=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGHT_HAVE_PCI=y -CONFIG_MIGRATION=y -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -# CONFIG_MMC_BLOCK_BOUNCE is not set -CONFIG_MMC_SUNXI=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_SUNXI=y -CONFIG_MTD_OF_NAND_PARTS=y -CONFIG_MULTI_IRQ_HANDLER=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_NAMESPACES=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEON=y -# CONFIG_NET_CLS_CGROUP is not set -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_NS=y -CONFIG_NET_PTP_CLASSIFY=y -CONFIG_NET_VENDOR_ALLWINNER=y -CONFIG_NLS=y -CONFIG_NO_BOOTMEM=y -CONFIG_NO_HZ=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_NR_CPUS=4 -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_MDIO=y -CONFIG_OF_MTD=y -CONFIG_OF_NET=y -CONFIG_OF_RESERVED_MEM=y -CONFIG_OF_TOUCHSCREEN=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PAGE_OFFSET=0xC0000000 -# CONFIG_PARTITION_ADVANCED is not set -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS_GENERIC is not set -# CONFIG_PCI_SYSCALL is not set -CONFIG_PERF_EVENTS=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHY_SUN4I_USB=y -# CONFIG_PHY_SUN9I_USB is not set -CONFIG_PINCTRL=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_PINCTRL_SUN4I_A10=y -CONFIG_PINCTRL_SUN5I_A10S=y -CONFIG_PINCTRL_SUN5I_A13=y -CONFIG_PINCTRL_SUN6I_A31=y -CONFIG_PINCTRL_SUN6I_A31S=y -CONFIG_PINCTRL_SUN6I_A31_R=y -CONFIG_PINCTRL_SUN7I_A20=y -CONFIG_PINCTRL_SUN8I_A23=y -CONFIG_PINCTRL_SUN8I_A23_R=y -CONFIG_PINCTRL_SUN9I_A80=y -CONFIG_PINCTRL_SUNXI_COMMON=y -# CONFIG_PL310_ERRATA_588369 is not set -# CONFIG_PL310_ERRATA_727915 is not set -# CONFIG_PL310_ERRATA_753970 is not set -# CONFIG_PL310_ERRATA_769419 is not set -CONFIG_PM=y -CONFIG_PM_CLK=y -# CONFIG_PM_DEBUG is not set -CONFIG_PM_OPP=y -CONFIG_PM_SLEEP=y -CONFIG_PM_SLEEP_SMP=y -CONFIG_POWER_RESET=y -CONFIG_POWER_SUPPLY=y -CONFIG_PPS=y -CONFIG_PREEMPT=y -CONFIG_PREEMPT_COUNT=y -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_RCU=y -CONFIG_PRINTK_TIME=y -# CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_PROC_EVENTS=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_PROC_PID_CPUSET=y -CONFIG_PTP_1588_CLOCK=y -CONFIG_PWM=y -CONFIG_PWM_SUN4I=y -CONFIG_PWM_SYSFS=y -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -CONFIG_QUOTA=y -CONFIG_QUOTACTL=y -CONFIG_QUOTA_NETLINK_INTERFACE=y -# CONFIG_RCU_BOOST is not set -CONFIG_RCU_STALL_COMMON=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_IRQ=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_SPI=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_AXP20X=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_GPIO=y -CONFIG_RELAY=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_SATA_PMP=y -CONFIG_SCHED_HRTICK=y -CONFIG_SCSI=y -CONFIG_SDIO_UART=y -CONFIG_SECURITYFS=y -CONFIG_SERIAL_8250_DW=y -CONFIG_SERIAL_8250_NR_UARTS=8 -CONFIG_SERIAL_8250_RUNTIME_UARTS=8 -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -CONFIG_SLUB_CPU_PARTIAL=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLUB_DEBUG_ON is not set -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_SUN4I=y -CONFIG_SPI_SUN6I=y -CONFIG_SRCU=y -# CONFIG_STAGING is not set -CONFIG_STMMAC_ETH=y -CONFIG_STMMAC_PLATFORM=y -CONFIG_STOP_MACHINE=y -CONFIG_STRICT_DEVMEM=y -CONFIG_SUN4I_DMA=y -# CONFIG_SUN4I_EMAC is not set -CONFIG_SUN4I_TIMER=y -CONFIG_SUN5I_HSTIMER=y -CONFIG_SUNXI_WATCHDOG=y -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -CONFIG_SWCONFIG=y -CONFIG_SWIOTLB=y -CONFIG_SWP_EMULATE=y -CONFIG_SYSFS_SYSCALL=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_TASKSTATS=y -CONFIG_TASK_DELAY_ACCT=y -CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_TASK_XACCT=y -CONFIG_THERMAL=y -# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set -# CONFIG_THERMAL_EMULATION is not set -# CONFIG_THERMAL_GOV_FAIR_SHARE is not set -CONFIG_THERMAL_GOV_STEP_WISE=y -# CONFIG_THERMAL_GOV_USER_SPACE is not set -CONFIG_THERMAL_HWMON=y -CONFIG_THERMAL_OF=y -# CONFIG_THUMB2_KERNEL is not set -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_TOUCHSCREEN_SUN4I=y -CONFIG_UEVENT_HELPER_PATH="" -CONFIG_UID16=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_UNINLINE_SPIN_UNLOCK=y -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_COMMON=y -CONFIG_USB_DWC2=y -# CONFIG_USB_DWC2_DEBUG is not set -CONFIG_USB_DWC2_HOST=y -CONFIG_USB_DWC2_PLATFORM=y -# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_HCD_PLATFORM=y -CONFIG_USB_NET_DRIVERS=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PLATFORM=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SUPPORT=y -CONFIG_USELIB=y -# CONFIG_USER_NS is not set -CONFIG_USE_OF=y -CONFIG_UTS_NS=y -CONFIG_VDSO=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_VT_CONSOLE_SLEEP=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_WATCHDOG_CORE=y -# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set -CONFIG_XFRM_ALGO=y -CONFIG_XFRM_USER=y -CONFIG_XPS=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_ZBOOT_ROM_TEXT=0 -CONFIG_ZLIB_INFLATE=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/sunxi/patches-3.18/100-dt-sun7i-add_spi0_pins_a.patch b/target/linux/sunxi/patches-3.18/100-dt-sun7i-add_spi0_pins_a.patch deleted file mode 100644 index b81ed44..0000000 --- a/target/linux/sunxi/patches-3.18/100-dt-sun7i-add_spi0_pins_a.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 0253d14782f80cfd1741d4ddd82b83dd7d44a91e Mon Sep 17 00:00:00 2001 -From: Hans de Goede <hdegoede@redhat.com> -Date: Mon, 28 Jul 2014 22:44:59 +0200 -Subject: [PATCH] ARM: dts: sun7i: Add spi0_pins_a pinctrl setting - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -784,6 +784,13 @@ - allwinner,pull = <0>; - }; - -+ spi0_pins_a: spi0@0 { -+ allwinner,pins = "PI10", "PI11", "PI12", "PI13", "PI14"; -+ allwinner,function = "spi0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ - spi1_pins_a: spi1@0 { - allwinner,pins = "PI16", "PI17", "PI18", "PI19"; - allwinner,function = "spi1"; diff --git a/target/linux/sunxi/patches-3.18/101-dt-sun7i-add-uart3_pins.patch b/target/linux/sunxi/patches-3.18/101-dt-sun7i-add-uart3_pins.patch deleted file mode 100644 index 284537a..0000000 --- a/target/linux/sunxi/patches-3.18/101-dt-sun7i-add-uart3_pins.patch +++ /dev/null @@ -1,29 +0,0 @@ -From e37ccbcd4587b7a2b943e23a9943b8917010b336 Mon Sep 17 00:00:00 2001 -From: Hans de Goede <hdegoede@redhat.com> -Date: Wed, 1 Oct 2014 08:39:58 +0200 -Subject: [PATCH] ARM: dts: sun7i: Add uart3_pins_b pinctrl setting - -The uart3_pins_a multiplexes the uart3 pins to port G, add a pinctrl entry -for mapping them to port H (as used on the Bananapi). - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -677,6 +677,13 @@ - allwinner,pull = <0>; - }; - -+ uart3_pins_b: uart3@1 { -+ allwinner,pins = "PH0", "PH1"; -+ allwinner,function = "uart3"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ - uart4_pins_a: uart4@0 { - allwinner,pins = "PG10", "PG11"; - allwinner,function = "uart4"; diff --git a/target/linux/sunxi/patches-3.18/102-dt-sun7i-add_mmc2_pins.patch b/target/linux/sunxi/patches-3.18/102-dt-sun7i-add_mmc2_pins.patch deleted file mode 100644 index 28128db..0000000 --- a/target/linux/sunxi/patches-3.18/102-dt-sun7i-add_mmc2_pins.patch +++ /dev/null @@ -1,26 +0,0 @@ -From f65624ca1b67c5683317b75da2c09ffadc22fa2e Mon Sep 17 00:00:00 2001 -From: Hans de Goede <hdegoede@redhat.com> -Date: Wed, 1 Oct 2014 00:40:57 +0200 -Subject: [PATCH] ARM: dts: sun7i: Add mmc2_pins_a pinctrl definition - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -833,6 +833,13 @@ - allwinner,pull = <1>; - }; - -+ mmc2_pins_a: mmc2@0 { -+ allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11"; -+ allwinner,function = "mmc2"; -+ allwinner,drive = <2>; -+ allwinner,pull = <1>; -+ }; -+ - mmc3_pins_a: mmc3@0 { - allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9"; - allwinner,function = "mmc3"; diff --git a/target/linux/sunxi/patches-3.18/110-input-add-sun4i-lradc.patch b/target/linux/sunxi/patches-3.18/110-input-add-sun4i-lradc.patch deleted file mode 100644 index 12b4628..0000000 --- a/target/linux/sunxi/patches-3.18/110-input-add-sun4i-lradc.patch +++ /dev/null @@ -1,400 +0,0 @@ -From 2c1fab89e83245a520871e807e233e66cbdb7c57 Mon Sep 17 00:00:00 2001 -From: Hans de Goede <hdegoede@redhat.com> -Date: Wed, 1 Jan 2014 19:44:49 +0100 -Subject: [PATCH] input: Add new sun4i-lradc-keys driver - -Allwinnner sunxi SoCs have a low resolution adc (called lradc) which is -specifically designed to have various (tablet) keys (ie home, back, search, -etc). attached to it using a resistor network. This adds a driver for this. - -There are 2 channels, currently this driver only supports chan0 since there -are no boards known to use chan1. - -This has been tested on an olimex a10s-olinuxino-micro, a13-olinuxino, and -a20-olinuxino-micro. - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- -Changes in v2: --Change devicetree bindings to use a per key subnode, like gpio-keys does ---- - .../devicetree/bindings/input/sun4i-lradc-keys.txt | 62 +++++ - MAINTAINERS | 7 + - drivers/input/keyboard/Kconfig | 10 + - drivers/input/keyboard/Makefile | 1 + - drivers/input/keyboard/sun4i-lradc-keys.c | 258 +++++++++++++++++++++ - 5 files changed, 338 insertions(+) - create mode 100644 Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt - create mode 100644 drivers/input/keyboard/sun4i-lradc-keys.c - ---- /dev/null -+++ b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt -@@ -0,0 +1,62 @@ -+Allwinner sun4i low res adc attached tablet keys -+------------------------------------------------ -+ -+Required properties: -+ - compatible: "allwinner,sun4i-a10-lradc-keys" -+ - reg: mmio address range of the chip -+ - interrupts: interrupt to which the chip is connected -+ - vref-supply: powersupply for the lradc reference voltage -+ -+Each key is represented as a sub-node of "allwinner,sun4i-a10-lradc-keys": -+ -+Required subnode-properties: -+ - label: Descriptive name of the key. -+ - linux,code: Keycode to emit. -+ - channel: Channel this key is attached to, mut be 0 or 1. -+ - voltage: Voltage in µV at lradc input when this key is pressed. -+ -+Example: -+ -+#include <dt-bindings/input/input.h> -+ -+ lradc: lradc@01c22800 { -+ compatible = "allwinner,sun4i-a10-lradc-keys"; -+ reg = <0x01c22800 0x100>; -+ interrupts = <31>; -+ vref-supply = <®_vcc3v0>; -+ -+ button@191 { -+ label = "Volume Up"; -+ linux,code = <KEY_VOLUMEUP>; -+ channel = <0>; -+ voltage = <191274>; -+ }; -+ -+ button@392 { -+ label = "Volume Down"; -+ linux,code = <KEY_VOLUMEDOWN>; -+ channel = <0>; -+ voltage = <392644>; -+ }; -+ -+ button@601 { -+ label = "Menu"; -+ linux,code = <KEY_MENU>; -+ channel = <0>; -+ voltage = <601151>; -+ }; -+ -+ button@795 { -+ label = "Enter"; -+ linux,code = <KEY_ENTER>; -+ channel = <0>; -+ voltage = <795090>; -+ }; -+ -+ button@987 { -+ label = "Home"; -+ linux,code = <KEY_HOMEPAGE>; -+ channel = <0>; -+ voltage = <987387>; -+ }; -+ }; ---- a/MAINTAINERS -+++ b/MAINTAINERS -@@ -9002,6 +9002,13 @@ F: arch/m68k/sun3*/ - F: arch/m68k/include/asm/sun3* - F: drivers/net/ethernet/i825xx/sun3* - -+SUN4I LOW RES ADC ATTACHED TABLET KEYS DRIVER -+M: Hans de Goede <hdegoede@redhat.com> -+L: linux-input@vger.kernel.org -+S: Maintained -+F: Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt -+F: drivers/input/keyboard/sun4i-lradc-keys.c -+ - SUNDANCE NETWORK DRIVER - M: Denis Kirjanov <kda@linux-powerpc.org> - L: netdev@vger.kernel.org ---- a/drivers/input/keyboard/Kconfig -+++ b/drivers/input/keyboard/Kconfig -@@ -567,6 +567,16 @@ config KEYBOARD_STMPE - To compile this driver as a module, choose M here: the module will be - called stmpe-keypad. - -+config KEYBOARD_SUN4I_LRADC -+ tristate "Allwinner sun4i low res adc attached tablet keys support" -+ depends on ARCH_SUNXI -+ help -+ This selects support for the Allwinner low res adc attached tablet -+ keys found on Allwinner sunxi SoCs. -+ -+ To compile this driver as a module, choose M here: the -+ module will be called sun4i-lradc-keys. -+ - config KEYBOARD_DAVINCI - tristate "TI DaVinci Key Scan" - depends on ARCH_DAVINCI_DM365 ---- a/drivers/input/keyboard/Makefile -+++ b/drivers/input/keyboard/Makefile -@@ -53,6 +53,7 @@ obj-$(CONFIG_KEYBOARD_SPEAR) += spear-k - obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o - obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o - obj-$(CONFIG_KEYBOARD_ST_KEYSCAN) += st-keyscan.o -+obj-$(CONFIG_KEYBOARD_SUN4I_LRADC) += sun4i-lradc-keys.o - obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o - obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o - obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o ---- /dev/null -+++ b/drivers/input/keyboard/sun4i-lradc-keys.c -@@ -0,0 +1,258 @@ -+/* -+ * Allwinner sun4i low res adc attached tablet keys driver -+ * -+ * Copyright (C) 2014 Hans de Goede <hdegoede@redhat.com> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+/* -+ * Allwinnner sunxi SoCs have a lradc which is specifically designed to have -+ * various (tablet) keys (ie home, back, search, etc). attached to it using -+ * a resistor network. This driver is for the keys on such boards. -+ * -+ * There are 2 channels, currently this driver only supports channel 0 since -+ * there are no boards known to use channel 1. -+ */ -+ -+#include <linux/err.h> -+#include <linux/init.h> -+#include <linux/input.h> -+#include <linux/interrupt.h> -+#include <linux/io.h> -+#include <linux/module.h> -+#include <linux/of_platform.h> -+#include <linux/platform_device.h> -+#include <linux/regulator/consumer.h> -+#include <linux/slab.h> -+ -+#define LRADC_CTRL 0x00 -+#define LRADC_INTC 0x04 -+#define LRADC_INTS 0x08 -+#define LRADC_DATA0 0x0c -+#define LRADC_DATA1 0x10 -+ -+/* LRADC_CTRL bits */ -+#define FIRST_CONVERT_DLY(x) ((x) << 24) /* 8 bits */ -+#define CHAN_SELECT(x) ((x) << 22) /* 2 bits */ -+#define CONTINUE_TIME_SEL(x) ((x) << 16) /* 4 bits */ -+#define KEY_MODE_SEL(x) ((x) << 12) /* 2 bits */ -+#define LEVELA_B_CNT(x) ((x) << 8) /* 4 bits */ -+#define HOLD_EN(x) ((x) << 6) -+#define LEVELB_VOL(x) ((x) << 4) /* 2 bits */ -+#define SAMPLE_RATE(x) ((x) << 2) /* 2 bits */ -+#define ENABLE(x) ((x) << 0) -+ -+/* LRADC_INTC and LRADC_INTS bits */ -+#define CHAN1_KEYUP_IRQ BIT(12) -+#define CHAN1_ALRDY_HOLD_IRQ BIT(11) -+#define CHAN1_HOLD_IRQ BIT(10) -+#define CHAN1_KEYDOWN_IRQ BIT(9) -+#define CHAN1_DATA_IRQ BIT(8) -+#define CHAN0_KEYUP_IRQ BIT(4) -+#define CHAN0_ALRDY_HOLD_IRQ BIT(3) -+#define CHAN0_HOLD_IRQ BIT(2) -+#define CHAN0_KEYDOWN_IRQ BIT(1) -+#define CHAN0_DATA_IRQ BIT(0) -+ -+struct sun4i_lradc_keymap { -+ u32 voltage; -+ u32 keycode; -+}; -+ -+struct sun4i_lradc_data { -+ struct device *dev; -+ struct input_dev *input; -+ void __iomem *base; -+ struct regulator *vref_supply; -+ struct sun4i_lradc_keymap *chan0_map; -+ u32 chan0_map_count; -+ u32 chan0_keycode; -+ u32 vref; -+}; -+ -+static irqreturn_t sun4i_lradc_irq(int irq, void *dev_id) -+{ -+ struct sun4i_lradc_data *lradc = dev_id; -+ u32 i, ints, val, voltage, diff, keycode = 0, closest = 0xffffffff; -+ -+ ints = readl(lradc->base + LRADC_INTS); -+ -+ /* -+ * lradc supports only one keypress at a time, release does not give -+ * any info as to which key was released, so we cache the keycode. -+ */ -+ if ((ints & CHAN0_KEYDOWN_IRQ) && lradc->chan0_keycode == 0) { -+ val = readl(lradc->base + LRADC_DATA0) & 0x3f; -+ voltage = val * lradc->vref / 63; -+ -+ for (i = 0; i < lradc->chan0_map_count; i++) { -+ diff = abs(lradc->chan0_map[i].voltage - voltage); -+ if (diff < closest) { -+ closest = diff; -+ keycode = lradc->chan0_map[i].keycode; -+ } -+ } -+ -+ lradc->chan0_keycode = keycode; -+ input_report_key(lradc->input, lradc->chan0_keycode, 1); -+ } -+ -+ if (ints & CHAN0_KEYUP_IRQ) { -+ input_report_key(lradc->input, lradc->chan0_keycode, 0); -+ lradc->chan0_keycode = 0; -+ } -+ -+ input_sync(lradc->input); -+ -+ writel(ints, lradc->base + LRADC_INTS); -+ -+ return IRQ_HANDLED; -+} -+ -+static int sun4i_lradc_open(struct input_dev *dev) -+{ -+ struct sun4i_lradc_data *lradc = input_get_drvdata(dev); -+ int ret; -+ -+ ret = regulator_enable(lradc->vref_supply); -+ if (ret) -+ return ret; -+ -+ /* lradc Vref internally is divided by 2/3 */ -+ lradc->vref = regulator_get_voltage(lradc->vref_supply) * 2 / 3; -+ -+ /* -+ * Set sample time to 4 ms / 250 Hz. Wait 2 * 4 ms for key to -+ * stabilize on press, wait (1 + 1) * 4 ms for key release -+ */ -+ writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) | -+ SAMPLE_RATE(0) | ENABLE(1), lradc->base + LRADC_CTRL); -+ -+ writel(CHAN0_KEYUP_IRQ | CHAN0_KEYDOWN_IRQ, lradc->base + LRADC_INTC); -+ -+ return 0; -+} -+ -+static void sun4i_lradc_close(struct input_dev *dev) -+{ -+ struct sun4i_lradc_data *lradc = input_get_drvdata(dev); -+ -+ /* Disable lradc, leave other settings unchanged */ -+ writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) | -+ SAMPLE_RATE(2), lradc->base + LRADC_CTRL); -+ writel(0, lradc->base + LRADC_INTC); -+ -+ regulator_disable(lradc->vref_supply); -+} -+ -+static int sun4i_lradc_probe(struct platform_device *pdev) -+{ -+ struct sun4i_lradc_data *lradc; -+ struct device *dev = &pdev->dev; -+ struct device_node *pp, *np = dev->of_node; -+ u32 channel; -+ int i, ret; -+ -+ lradc = devm_kzalloc(dev, sizeof(struct sun4i_lradc_data), GFP_KERNEL); -+ if (!lradc) -+ return -ENOMEM; -+ -+ lradc->chan0_map_count = of_get_child_count(np); -+ lradc->chan0_map = devm_kmalloc(dev, lradc->chan0_map_count * -+ sizeof(struct sun4i_lradc_keymap), GFP_KERNEL); -+ if (!lradc->chan0_map) -+ return -ENOMEM; -+ -+ i = 0; -+ for_each_child_of_node(np, pp) { -+ struct sun4i_lradc_keymap *map = &lradc->chan0_map[i]; -+ -+ ret = of_property_read_u32(pp, "channel", &channel); -+ if (ret || channel != 0) { -+ dev_err(dev, "%s: Inval channel prop\n", pp->name); -+ return -EINVAL; -+ } -+ -+ ret = of_property_read_u32(pp, "voltage", &map->voltage); -+ if (ret) { -+ dev_err(dev, "%s: Inval voltage prop\n", pp->name); -+ return -EINVAL; -+ } -+ -+ ret = of_property_read_u32(pp, "linux,code", &map->keycode); -+ if (ret) { -+ dev_err(dev, "%s: Inval linux,code prop\n", pp->name); -+ return -EINVAL; -+ } -+ -+ i++; -+ } -+ -+ lradc->vref_supply = devm_regulator_get(dev, "vref"); -+ if (IS_ERR(lradc->vref_supply)) -+ return PTR_ERR(lradc->vref_supply); -+ -+ lradc->dev = dev; -+ lradc->input = devm_input_allocate_device(dev); -+ if (!lradc->input) -+ return -ENOMEM; -+ -+ lradc->input->name = pdev->name; -+ lradc->input->phys = "sun4i_lradc/input0"; -+ lradc->input->open = sun4i_lradc_open; -+ lradc->input->close = sun4i_lradc_close; -+ lradc->input->id.bustype = BUS_HOST; -+ lradc->input->id.vendor = 0x0001; -+ lradc->input->id.product = 0x0001; -+ lradc->input->id.version = 0x0100; -+ lradc->input->evbit[0] = BIT(EV_SYN) | BIT(EV_KEY); -+ for (i = 0; i < lradc->chan0_map_count; i++) -+ set_bit(lradc->chan0_map[i].keycode, lradc->input->keybit); -+ input_set_drvdata(lradc->input, lradc); -+ -+ lradc->base = devm_ioremap_resource(dev, -+ platform_get_resource(pdev, IORESOURCE_MEM, 0)); -+ if (IS_ERR(lradc->base)) -+ return PTR_ERR(lradc->base); -+ -+ ret = devm_request_irq(dev, platform_get_irq(pdev, 0), sun4i_lradc_irq, -+ 0, "sun4i-a10-lradc-keys", lradc); -+ if (ret) -+ return ret; -+ -+ ret = input_register_device(lradc->input); -+ if (ret) -+ return ret; -+ -+ platform_set_drvdata(pdev, lradc); -+ return 0; -+} -+ -+static const struct of_device_id sun4i_lradc_of_match[] = { -+ { .compatible = "allwinner,sun4i-a10-lradc-keys", }, -+ { /* sentinel */ } -+}; -+MODULE_DEVICE_TABLE(of, sun4i_lradc_of_match); -+ -+static struct platform_driver sun4i_lradc_driver = { -+ .driver = { -+ .name = "sun4i-a10-lradc-keys", -+ .of_match_table = of_match_ptr(sun4i_lradc_of_match), -+ }, -+ .probe = sun4i_lradc_probe, -+}; -+ -+module_platform_driver(sun4i_lradc_driver); -+ -+MODULE_DESCRIPTION("Allwinner sun4i low res adc attached tablet keys driver"); -+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/sunxi/patches-3.18/111-dt-sun4i-add-lradc.patch b/target/linux/sunxi/patches-3.18/111-dt-sun4i-add-lradc.patch deleted file mode 100644 index d2298a4..0000000 --- a/target/linux/sunxi/patches-3.18/111-dt-sun4i-add-lradc.patch +++ /dev/null @@ -1,26 +0,0 @@ -From f39ea4358d2e4b939b8ca55ee344d3c8fdfc0a6a Mon Sep 17 00:00:00 2001 -From: Hans de Goede <hdegoede@redhat.com> -Date: Wed, 1 Jan 2014 19:51:36 +0100 -Subject: [PATCH] ARM: dts: sun4i: Add lradc node - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -669,6 +669,13 @@ - status = "disabled"; - }; - -+ lradc: lradc@01c22800 { -+ compatible = "allwinner,sun4i-a10-lradc-keys"; -+ reg = <0x01c22800 0x100>; -+ interrupts = <31>; -+ status = "disabled"; -+ }; -+ - sid: eeprom@01c23800 { - compatible = "allwinner,sun4i-a10-sid"; - reg = <0x01c23800 0x10>; diff --git a/target/linux/sunxi/patches-3.18/112-dt-sun5i-add-lradc.patch b/target/linux/sunxi/patches-3.18/112-dt-sun5i-add-lradc.patch deleted file mode 100644 index edc9016..0000000 --- a/target/linux/sunxi/patches-3.18/112-dt-sun5i-add-lradc.patch +++ /dev/null @@ -1,167 +0,0 @@ -From 3bf1194692f3a275e0776d3c0b6f17826cc01baa Mon Sep 17 00:00:00 2001 -From: Hans de Goede <hdegoede@redhat.com> -Date: Wed, 1 Jan 2014 19:50:33 +0100 -Subject: [PATCH] ARM: dts: sun5i: Add lradc node - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 45 ++++++++++++++++++++++-- - arch/arm/boot/dts/sun5i-a10s.dtsi | 7 ++++ - arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 45 ++++++++++++++++++++++-- - arch/arm/boot/dts/sun5i-a13.dtsi | 7 ++++ - 4 files changed, 100 insertions(+), 4 deletions(-) - ---- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts -+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts -@@ -12,8 +12,9 @@ - */ - - /dts-v1/; --/include/ "sun5i-a10s.dtsi" --/include/ "sunxi-common-regulators.dtsi" -+#include "sun5i-a10s.dtsi" -+#include "sunxi-common-regulators.dtsi" -+#include <dt-bindings/input/input.h> - - / { - model = "Olimex A10s-Olinuxino Micro"; -@@ -98,6 +99,46 @@ - }; - }; - -+ lradc: lradc@01c22800 { -+ vref-supply = <®_vcc3v0>; -+ status = "okay"; -+ -+ button@191 { -+ label = "Volume Up"; -+ linux,code = <KEY_VOLUMEUP>; -+ channel = <0>; -+ voltage = <191274>; -+ }; -+ -+ button@392 { -+ label = "Volume Down"; -+ linux,code = <KEY_VOLUMEDOWN>; -+ channel = <0>; -+ voltage = <392644>; -+ }; -+ -+ button@601 { -+ label = "Menu"; -+ linux,code = <KEY_MENU>; -+ channel = <0>; -+ voltage = <601151>; -+ }; -+ -+ button@795 { -+ label = "Enter"; -+ linux,code = <KEY_ENTER>; -+ channel = <0>; -+ voltage = <795090>; -+ }; -+ -+ button@987 { -+ label = "Home"; -+ linux,code = <KEY_HOMEPAGE>; -+ channel = <0>; -+ voltage = <987387>; -+ }; -+ }; -+ - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -520,6 +520,13 @@ - reg = <0x01c20c90 0x10>; - }; - -+ lradc: lradc@01c22800 { -+ compatible = "allwinner,sun4i-a10-lradc-keys"; -+ reg = <0x01c22800 0x100>; -+ interrupts = <31>; -+ status = "disabled"; -+ }; -+ - sid: eeprom@01c23800 { - compatible = "allwinner,sun4i-a10-sid"; - reg = <0x01c23800 0x10>; ---- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts -+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts -@@ -12,8 +12,9 @@ - */ - - /dts-v1/; --/include/ "sun5i-a13.dtsi" --/include/ "sunxi-common-regulators.dtsi" -+#include "sun5i-a13.dtsi" -+#include "sunxi-common-regulators.dtsi" -+#include <dt-bindings/input/input.h> - - / { - model = "Olimex A13-Olinuxino"; -@@ -66,6 +67,46 @@ - }; - }; - -+ lradc: lradc@01c22800 { -+ vref-supply = <®_vcc3v0>; -+ status = "okay"; -+ -+ button@191 { -+ label = "Volume Up"; -+ linux,code = <KEY_VOLUMEUP>; -+ channel = <0>; -+ voltage = <191274>; -+ }; -+ -+ button@392 { -+ label = "Volume Down"; -+ linux,code = <KEY_VOLUMEDOWN>; -+ channel = <0>; -+ voltage = <392644>; -+ }; -+ -+ button@601 { -+ label = "Menu"; -+ linux,code = <KEY_MENU>; -+ channel = <0>; -+ voltage = <601151>; -+ }; -+ -+ button@795 { -+ label = "Enter"; -+ linux,code = <KEY_ENTER>; -+ channel = <0>; -+ voltage = <795090>; -+ }; -+ -+ button@987 { -+ label = "Home"; -+ linux,code = <KEY_HOMEPAGE>; -+ channel = <0>; -+ voltage = <987387>; -+ }; -+ }; -+ - uart1: serial@01c28400 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -468,6 +468,13 @@ - reg = <0x01c20c90 0x10>; - }; - -+ lradc: lradc@01c22800 { -+ compatible = "allwinner,sun4i-a10-lradc-keys"; -+ reg = <0x01c22800 0x100>; -+ interrupts = <31>; -+ status = "disabled"; -+ }; -+ - sid: eeprom@01c23800 { - compatible = "allwinner,sun4i-a10-sid"; - reg = <0x01c23800 0x10>; diff --git a/target/linux/sunxi/patches-3.18/113-dt-sun7i-add-lradc.patch b/target/linux/sunxi/patches-3.18/113-dt-sun7i-add-lradc.patch deleted file mode 100644 index ae2c383..0000000 --- a/target/linux/sunxi/patches-3.18/113-dt-sun7i-add-lradc.patch +++ /dev/null @@ -1,102 +0,0 @@ -From a735a9b354ebc1a17b648ef8c3482c71fdbf40da Mon Sep 17 00:00:00 2001 -From: Hans de Goede <hdegoede@redhat.com> -Date: Wed, 1 Jan 2014 20:26:21 +0100 -Subject: [PATCH] ARM: dts: sun7i: Add lradc node - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 59 ++++++++++++++++++++++++- - arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++ - 2 files changed, 64 insertions(+), 2 deletions(-) - ---- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -@@ -12,8 +12,9 @@ - */ - - /dts-v1/; --/include/ "sun7i-a20.dtsi" --/include/ "sunxi-common-regulators.dtsi" -+#include "sun7i-a20.dtsi" -+#include "sunxi-common-regulators.dtsi" -+#include <dt-bindings/input/input.h> - - / { - model = "Olimex A20-Olinuxino Micro"; -@@ -100,6 +101,60 @@ - }; - }; - -+ lradc: lradc@01c22800 { -+ vref-supply = <®_vcc3v0>; -+ status = "okay"; -+ -+ button@191 { -+ label = "Volume Up"; -+ linux,code = <KEY_VOLUMEUP>; -+ channel = <0>; -+ voltage = <191274>; -+ }; -+ -+ button@392 { -+ label = "Volume Down"; -+ linux,code = <KEY_VOLUMEDOWN>; -+ channel = <0>; -+ voltage = <392644>; -+ }; -+ -+ button@601 { -+ label = "Menu"; -+ linux,code = <KEY_MENU>; -+ channel = <0>; -+ voltage = <601151>; -+ }; -+ -+ button@795 { -+ label = "Search"; -+ linux,code = <KEY_SEARCH>; -+ channel = <0>; -+ voltage = <795090>; -+ }; -+ -+ button@987 { -+ label = "Home"; -+ linux,code = <KEY_HOMEPAGE>; -+ channel = <0>; -+ voltage = <987387>; -+ }; -+ -+ button@1184 { -+ label = "Esc"; -+ linux,code = <KEY_ESC>; -+ channel = <0>; -+ voltage = <1184678>; -+ }; -+ -+ button@1398 { -+ label = "Enter"; -+ linux,code = <KEY_ENTER>; -+ channel = <0>; -+ voltage = <1398804>; -+ }; -+ }; -+ - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -911,6 +911,13 @@ - status = "disabled"; - }; - -+ lradc: lradc@01c22800 { -+ compatible = "allwinner,sun4i-a10-lradc-keys"; -+ reg = <0x01c22800 0x100>; -+ interrupts = <0 31 4>; -+ status = "disabled"; -+ }; -+ - sid: eeprom@01c23800 { - compatible = "allwinner,sun7i-a20-sid"; - reg = <0x01c23800 0x200>; diff --git a/target/linux/sunxi/patches-3.18/115-input-sun4i-ts-update-temp-curve.patch b/target/linux/sunxi/patches-3.18/115-input-sun4i-ts-update-temp-curve.patch deleted file mode 100644 index 331c93b..0000000 --- a/target/linux/sunxi/patches-3.18/115-input-sun4i-ts-update-temp-curve.patch +++ /dev/null @@ -1,79 +0,0 @@ -From 2e2493cd07405dfa88e53199b47bdbbb5336fdce Mon Sep 17 00:00:00 2001 -From: Hans de Goede <hdegoede@redhat.com> -Date: Mon, 16 Jun 2014 20:01:12 +0200 -Subject: [PATCH] touchscreen: sun4i-ts: A10 (sun4i) has a different - temperature curve - -Testing has revealed that the temperature in the rtp controller of the A10 -(sun4i) SoC has a different curve then on the A13 (sun5i) and later models. - -Add a new sun5i-a13-ts compatible to differentiate the newer models and -set the curve based on the compatible string. - -This fixes the temperature reported on the A10 being much higher then -expected. - -Note the new curve is still not ideal on all A10-s, that seems to have to -do with there being a large spread between different A10-s out there. - -Reported-by: Tong Zhang <lovewilliam@gmail.com> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - .../devicetree/bindings/input/touchscreen/sun4i.txt | 2 +- - drivers/input/touchscreen/sun4i-ts.c | 13 ++++++++++++- - 2 files changed, 13 insertions(+), 2 deletions(-) - ---- a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt -+++ b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt -@@ -2,7 +2,7 @@ sun4i resistive touchscreen controller - -------------------------------------- - - Required properties: -- - compatible: "allwinner,sun4i-a10-ts" -+ - compatible: "allwinner,sun4i-a10-ts" or "allwinner,sun5i-a13-ts" - - reg: mmio address range of the chip - - interrupts: interrupt to which the chip is connected - ---- a/drivers/input/touchscreen/sun4i-ts.c -+++ b/drivers/input/touchscreen/sun4i-ts.c -@@ -111,6 +111,8 @@ struct sun4i_ts_data { - unsigned int irq; - bool ignore_fifo_data; - int temp_data; -+ int temp_offset; -+ int temp_step; - }; - - static void sun4i_ts_irq_handle_input(struct sun4i_ts_data *ts, u32 reg_val) -@@ -189,7 +191,8 @@ static ssize_t show_temp(struct device * - if (ts->temp_data == -1) - return -EAGAIN; - -- return sprintf(buf, "%d\n", (ts->temp_data - 1447) * 100); -+ return sprintf(buf, "%d\n", -+ (ts->temp_data - ts->temp_offset) * ts->temp_step); - } - - static ssize_t show_temp_label(struct device *dev, -@@ -224,6 +227,13 @@ static int sun4i_ts_probe(struct platfor - ts->dev = dev; - ts->ignore_fifo_data = true; - ts->temp_data = -1; -+ if (of_device_is_compatible(np, "allwinner,sun4i-a10-ts")) { -+ ts->temp_offset = 1900; -+ ts->temp_step = 100; -+ } else { -+ ts->temp_offset = 1447; -+ ts->temp_step = 100; -+ } - - ts_attached = of_property_read_bool(np, "allwinner,ts-attached"); - if (ts_attached) { -@@ -318,6 +328,7 @@ static int sun4i_ts_remove(struct platfo - - static const struct of_device_id sun4i_ts_of_match[] = { - { .compatible = "allwinner,sun4i-a10-ts", }, -+ { .compatible = "allwinner,sun5i-a13-ts", }, - { /* sentinel */ } - }; - MODULE_DEVICE_TABLE(of, sun4i_ts_of_match); diff --git a/target/linux/sunxi/patches-3.18/116-dt-sunxi-update-compats-for-tempcurves.patch b/target/linux/sunxi/patches-3.18/116-dt-sunxi-update-compats-for-tempcurves.patch deleted file mode 100644 index fe8dcdb..0000000 --- a/target/linux/sunxi/patches-3.18/116-dt-sunxi-update-compats-for-tempcurves.patch +++ /dev/null @@ -1,51 +0,0 @@ -From ff774d842a2bf9136b9c7ddd7f5085a9062705ac Mon Sep 17 00:00:00 2001 -From: Hans de Goede <hdegoede@redhat.com> -Date: Mon, 16 Jun 2014 20:06:43 +0200 -Subject: [PATCH] ARM: dts: sunxi: Adjust touchscreen compatible for sun5i and - later - -The touchscreen controller in the A13 and later has a different temperature -curve than the one in the original A10, change the compatible for the A13 and -later so that the kernel will use the correct curve. - -Reported-by: Tong Zhang <lovewilliam@gmail.com> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/sun5i-a10s.dtsi | 2 +- - arch/arm/boot/dts/sun5i-a13.dtsi | 2 +- - arch/arm/boot/dts/sun7i-a20.dtsi | 2 +- - 3 files changed, 3 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -533,7 +533,7 @@ - }; - - rtp: rtp@01c25000 { -- compatible = "allwinner,sun4i-a10-ts"; -+ compatible = "allwinner,sun5i-a13-ts"; - reg = <0x01c25000 0x100>; - interrupts = <29>; - }; ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -481,7 +481,7 @@ - }; - - rtp: rtp@01c25000 { -- compatible = "allwinner,sun4i-a10-ts"; -+ compatible = "allwinner,sun5i-a13-ts"; - reg = <0x01c25000 0x100>; - interrupts = <29>; - }; ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -924,7 +924,7 @@ - }; - - rtp: rtp@01c25000 { -- compatible = "allwinner,sun4i-a10-ts"; -+ compatible = "allwinner,sun5i-a13-ts"; - reg = <0x01c25000 0x100>; - interrupts = <0 29 4>; - }; diff --git a/target/linux/sunxi/patches-3.18/130-input-add-axp20x-pek.patch b/target/linux/sunxi/patches-3.18/130-input-add-axp20x-pek.patch deleted file mode 100644 index 28ed6a3..0000000 --- a/target/linux/sunxi/patches-3.18/130-input-add-axp20x-pek.patch +++ /dev/null @@ -1,332 +0,0 @@ -From 63d559304a15ffead2fa1014b93dbcabf516c257 Mon Sep 17 00:00:00 2001 -From: Carlo Caione <carlo@caione.org> -Date: Mon, 19 May 2014 21:47:45 +0200 -Subject: [PATCH] input: misc: Add driver for AXP20x Power Enable Key - -This patch add support for the Power Enable Key found on MFD AXP202 and -AXP209. Besides the basic support for the button, the driver adds two -entries in sysfs to configure the time delay for power on/off. - -Signed-off-by: Carlo Caione <carlo@caione.org> -Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> ---- - drivers/input/misc/Kconfig | 11 ++ - drivers/input/misc/Makefile | 1 + - drivers/input/misc/axp20x-pek.c | 281 ++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 293 insertions(+) - create mode 100644 drivers/input/misc/axp20x-pek.c - ---- a/drivers/input/misc/Kconfig -+++ b/drivers/input/misc/Kconfig -@@ -404,6 +404,17 @@ config INPUT_RETU_PWRBUTTON - To compile this driver as a module, choose M here. The module will - be called retu-pwrbutton. - -+config INPUT_AXP20X_PEK -+ tristate "X-Powers AXP20X power button driver" -+ depends on MFD_AXP20X -+ help -+ Say Y here if you want to enable power key reporting via the -+ AXP20X PMIC. -+ -+ To compile this driver as a module, choose M here. The module will -+ be called axp20x-pek. -+ -+ - config INPUT_TWL4030_PWRBUTTON - tristate "TWL4030 Power button Driver" - depends on TWL4030_CORE ---- a/drivers/input/misc/Makefile -+++ b/drivers/input/misc/Makefile -@@ -54,6 +54,7 @@ obj-$(CONFIG_INPUT_POWERMATE) += powerm - obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o - obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o - obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o -+obj-$(CONFIG_INPUT_AXP20X_PEK) += axp20x-pek.o - obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o - obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o - obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o ---- /dev/null -+++ b/drivers/input/misc/axp20x-pek.c -@@ -0,0 +1,281 @@ -+/* -+ * axp20x power button driver. -+ * -+ * Copyright (C) 2013 Carlo Caione <carlo@caione.org> -+ * -+ * This file is subject to the terms and conditions of the GNU General -+ * Public License. See the file "COPYING" in the main directory of this -+ * archive for more details. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include <linux/errno.h> -+#include <linux/irq.h> -+#include <linux/init.h> -+#include <linux/input.h> -+#include <linux/interrupt.h> -+#include <linux/kernel.h> -+#include <linux/mfd/axp20x.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/regmap.h> -+#include <linux/slab.h> -+ -+#define AXP20X_PEK_STARTUP_MASK (0xc0) -+#define AXP20X_PEK_SHUTDOWN_MASK (0x03) -+ -+struct axp20x_pek { -+ struct axp20x_dev *axp20x; -+ struct input_dev *input; -+ int irq_dbr; -+ int irq_dbf; -+}; -+ -+struct axp20x_time { -+ unsigned int time; -+ unsigned int idx; -+}; -+ -+static const struct axp20x_time startup_time[] = { -+ { .time = 128, .idx = 0 }, -+ { .time = 1000, .idx = 2 }, -+ { .time = 3000, .idx = 1 }, -+ { .time = 2000, .idx = 3 }, -+}; -+ -+static const struct axp20x_time shutdown_time[] = { -+ { .time = 4000, .idx = 0 }, -+ { .time = 6000, .idx = 1 }, -+ { .time = 8000, .idx = 2 }, -+ { .time = 10000, .idx = 3 }, -+}; -+ -+struct axp20x_pek_ext_attr { -+ const struct axp20x_time *p_time; -+ unsigned int mask; -+}; -+ -+static struct axp20x_pek_ext_attr axp20x_pek_startup_ext_attr = { -+ .p_time = startup_time, -+ .mask = AXP20X_PEK_STARTUP_MASK, -+}; -+ -+static struct axp20x_pek_ext_attr axp20x_pek_shutdown_ext_attr = { -+ .p_time = shutdown_time, -+ .mask = AXP20X_PEK_SHUTDOWN_MASK, -+}; -+ -+static struct axp20x_pek_ext_attr *get_axp_ext_attr(struct device_attribute *attr) -+{ -+ return container_of(attr, struct dev_ext_attribute, attr)->var; -+} -+ -+static ssize_t axp20x_show_ext_attr(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev); -+ struct axp20x_pek_ext_attr *axp20x_ea = get_axp_ext_attr(attr); -+ unsigned int val; -+ int ret, i; -+ -+ ret = regmap_read(axp20x_pek->axp20x->regmap, AXP20X_PEK_KEY, &val); -+ if (ret != 0) -+ return ret; -+ -+ val &= axp20x_ea->mask; -+ val >>= ffs(axp20x_ea->mask) - 1; -+ -+ for (i = 0; i < 4; i++) -+ if (val == axp20x_ea->p_time[i].idx) -+ val = axp20x_ea->p_time[i].time; -+ -+ return sprintf(buf, "%u\n", val); -+} -+ -+static ssize_t axp20x_store_ext_attr(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev); -+ struct axp20x_pek_ext_attr *axp20x_ea = get_axp_ext_attr(attr); -+ char val_str[20]; -+ size_t len; -+ int ret, i; -+ unsigned int val, idx = 0; -+ unsigned int best_err = UINT_MAX; -+ -+ val_str[sizeof(val_str) - 1] = '\0'; -+ strncpy(val_str, buf, sizeof(val_str) - 1); -+ len = strlen(val_str); -+ -+ if (len && val_str[len - 1] == '\n') -+ val_str[len - 1] = '\0'; -+ -+ ret = kstrtouint(val_str, 10, &val); -+ if (ret) -+ return ret; -+ -+ for (i = 3; i >= 0; i--) { -+ unsigned int err; -+ -+ err = abs(axp20x_ea->p_time[i].time - val); -+ if (err < best_err) { -+ best_err = err; -+ idx = axp20x_ea->p_time[i].idx; -+ } -+ -+ if (!err) -+ break; -+ } -+ -+ idx <<= ffs(axp20x_ea->mask) - 1; -+ ret = regmap_update_bits(axp20x_pek->axp20x->regmap, -+ AXP20X_PEK_KEY, -+ axp20x_ea->mask, idx); -+ if (ret != 0) -+ return -EINVAL; -+ return count; -+} -+ -+static struct dev_ext_attribute axp20x_dev_attr_startup = { -+ .attr = __ATTR(startup, 0644, axp20x_show_ext_attr, axp20x_store_ext_attr), -+ .var = &axp20x_pek_startup_ext_attr -+}; -+ -+static struct dev_ext_attribute axp20x_dev_attr_shutdown = { -+ .attr = __ATTR(shutdown, 0644, axp20x_show_ext_attr, axp20x_store_ext_attr), -+ .var = &axp20x_pek_shutdown_ext_attr -+}; -+ -+static irqreturn_t axp20x_pek_irq(int irq, void *pwr) -+{ -+ struct input_dev *idev = pwr; -+ struct axp20x_pek *axp20x_pek = input_get_drvdata(idev); -+ -+ if (irq == axp20x_pek->irq_dbr) -+ input_report_key(idev, KEY_POWER, true); -+ else if (irq == axp20x_pek->irq_dbf) -+ input_report_key(idev, KEY_POWER, false); -+ -+ input_sync(idev); -+ -+ return IRQ_HANDLED; -+} -+ -+static int axp20x_pek_probe(struct platform_device *pdev) -+{ -+ struct axp20x_pek *axp20x_pek; -+ struct axp20x_dev *axp20x; -+ struct input_dev *idev; -+ int error; -+ -+ axp20x_pek = devm_kzalloc(&pdev->dev, sizeof(struct axp20x_pek), -+ GFP_KERNEL); -+ if (!axp20x_pek) -+ return -ENOMEM; -+ -+ axp20x_pek->axp20x = dev_get_drvdata(pdev->dev.parent); -+ axp20x = axp20x_pek->axp20x; -+ -+ axp20x_pek->irq_dbr = platform_get_irq_byname(pdev, "PEK_DBR"); -+ if (axp20x_pek->irq_dbr < 0) { -+ dev_err(&pdev->dev, "No IRQ for PEK_DBR, error=%d\n", -+ axp20x_pek->irq_dbr); -+ return axp20x_pek->irq_dbr; -+ } -+ axp20x_pek->irq_dbr = regmap_irq_get_virq(axp20x->regmap_irqc, -+ axp20x_pek->irq_dbr); -+ -+ axp20x_pek->irq_dbf = platform_get_irq_byname(pdev, "PEK_DBF"); -+ if (axp20x_pek->irq_dbf < 0) { -+ dev_err(&pdev->dev, "No IRQ for PEK_DBF, error=%d\n", -+ axp20x_pek->irq_dbf); -+ return axp20x_pek->irq_dbf; -+ } -+ axp20x_pek->irq_dbf = regmap_irq_get_virq(axp20x->regmap_irqc, -+ axp20x_pek->irq_dbf); -+ -+ axp20x_pek->input = devm_input_allocate_device(&pdev->dev); -+ if (!axp20x_pek->input) -+ return -ENOMEM; -+ -+ idev = axp20x_pek->input; -+ -+ idev->name = "axp20x-pek"; -+ idev->phys = "m1kbd/input2"; -+ idev->dev.parent = &pdev->dev; -+ -+ input_set_capability(idev, EV_KEY, KEY_POWER); -+ -+ input_set_drvdata(idev, axp20x_pek); -+ -+ error = devm_request_any_context_irq(&pdev->dev, axp20x_pek->irq_dbr, -+ axp20x_pek_irq, 0, -+ "axp20x-pek-dbr", idev); -+ if (error < 0) { -+ dev_err(axp20x->dev, "Failed to request dbr IRQ#%d: %d\n", -+ axp20x_pek->irq_dbr, error); -+ -+ return error; -+ } -+ -+ error = devm_request_any_context_irq(&pdev->dev, axp20x_pek->irq_dbf, -+ axp20x_pek_irq, 0, -+ "axp20x-pek-dbf", idev); -+ if (error < 0) { -+ dev_err(axp20x->dev, "Failed to request dbf IRQ#%d: %d\n", -+ axp20x_pek->irq_dbf, error); -+ return error; -+ } -+ -+ error = device_create_file(&pdev->dev, &axp20x_dev_attr_startup.attr); -+ if (error) -+ return error; -+ -+ error = device_create_file(&pdev->dev, &axp20x_dev_attr_shutdown.attr); -+ if (error) -+ goto clear_startup_attr; -+ -+ error = input_register_device(idev); -+ if (error) { -+ dev_err(axp20x->dev, "Can't register input device: %d\n", error); -+ goto clear_attr; -+ } -+ -+ platform_set_drvdata(pdev, axp20x_pek); -+ -+ return 0; -+ -+clear_attr: -+ device_remove_file(&pdev->dev, &axp20x_dev_attr_shutdown.attr); -+ -+clear_startup_attr: -+ device_remove_file(&pdev->dev, &axp20x_dev_attr_startup.attr); -+ -+ return error; -+} -+ -+int axp20x_pek_remove(struct platform_device *pdev) -+{ -+ device_remove_file(&pdev->dev, &axp20x_dev_attr_shutdown.attr); -+ device_remove_file(&pdev->dev, &axp20x_dev_attr_startup.attr); -+ -+ return 0; -+} -+ -+static struct platform_driver axp20x_pek_driver = { -+ .probe = axp20x_pek_probe, -+ .remove = axp20x_pek_remove, -+ .driver = { -+ .name = "axp20x-pek", -+ .owner = THIS_MODULE, -+ }, -+}; -+module_platform_driver(axp20x_pek_driver); -+ -+MODULE_DESCRIPTION("axp20x Power Button"); -+MODULE_AUTHOR("Carlo Caione <carlo@caione.org>"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/sunxi/patches-3.18/150-pwm-add-sunxi-driver.patch b/target/linux/sunxi/patches-3.18/150-pwm-add-sunxi-driver.patch deleted file mode 100644 index 49560c3..0000000 --- a/target/linux/sunxi/patches-3.18/150-pwm-add-sunxi-driver.patch +++ /dev/null @@ -1,402 +0,0 @@ ---- a/drivers/pwm/Kconfig -+++ b/drivers/pwm/Kconfig -@@ -263,6 +263,15 @@ config PWM_STI - To compile this driver as a module, choose M here: the module - will be called pwm-sti. - -+config PWM_SUN4I -+ tristate "Allwinner sun4i PWM support" -+ depends on ARCH_SUNXI || COMPILE_TEST -+ help -+ Generic PWM framework driver for Allwinner sun4i and sun7i SoCs. -+ -+ To compile this driver as a module, choose M here: the module -+ will be called pwm-sun4i. -+ - config PWM_TEGRA - tristate "NVIDIA Tegra PWM support" - depends on ARCH_TEGRA ---- a/drivers/pwm/Makefile -+++ b/drivers/pwm/Makefile -@@ -24,6 +24,7 @@ obj-$(CONFIG_PWM_ROCKCHIP) += pwm-rockch - obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o - obj-$(CONFIG_PWM_SPEAR) += pwm-spear.o - obj-$(CONFIG_PWM_STI) += pwm-sti.o -+obj-$(CONFIG_PWM_SUN4I) += pwm-sun4i.o - obj-$(CONFIG_PWM_TEGRA) += pwm-tegra.o - obj-$(CONFIG_PWM_TIECAP) += pwm-tiecap.o - obj-$(CONFIG_PWM_TIEHRPWM) += pwm-tiehrpwm.o ---- /dev/null -+++ b/drivers/pwm/pwm-sun4i.c -@@ -0,0 +1,371 @@ -+/* -+ * Driver for Allwinner sun4i Pulse Width Modulation Controller -+ * -+ * Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com> -+ * -+ * Licensed under GPLv2. -+ */ -+ -+#include <linux/bitops.h> -+#include <linux/clk.h> -+#include <linux/err.h> -+#include <linux/io.h> -+#include <linux/module.h> -+#include <linux/mutex.h> -+#include <linux/of.h> -+#include <linux/of_device.h> -+#include <linux/platform_device.h> -+#include <linux/pwm.h> -+#include <linux/slab.h> -+#include <linux/time.h> -+ -+#define PWM_CTRL_REG 0x0 -+ -+#define PWM_CH_PRD_BASE 0x4 -+#define PWM_CH_PRD_OFFSET 0x4 -+#define PWM_CH_PRD(ch) (PWM_CH_PRD_BASE + PWM_CH_PRD_OFFSET * (ch)) -+ -+#define PWMCH_OFFSET 15 -+#define PWM_PRESCAL_MASK GENMASK(3, 0) -+#define PWM_PRESCAL_OFF 0 -+#define PWM_EN BIT(4) -+#define PWM_ACT_STATE BIT(5) -+#define PWM_CLK_GATING BIT(6) -+#define PWM_MODE BIT(7) -+#define PWM_PULSE BIT(8) -+#define PWM_BYPASS BIT(9) -+ -+#define PWM_RDY_BASE 28 -+#define PWM_RDY_OFFSET 1 -+#define PWM_RDY(ch) BIT(PWM_RDY_BASE + PWM_RDY_OFFSET * (ch)) -+ -+#define PWM_PRD(prd) (((prd) - 1) << 16) -+#define PWM_PRD_MASK GENMASK(15, 0) -+ -+#define PWM_DTY_MASK GENMASK(15, 0) -+ -+#define BIT_CH(bit, chan) ((bit) << ((chan) * PWMCH_OFFSET)) -+ -+static const u32 prescaler_table[] = { -+ 120, -+ 180, -+ 240, -+ 360, -+ 480, -+ 0, -+ 0, -+ 0, -+ 12000, -+ 24000, -+ 36000, -+ 48000, -+ 72000, -+ 0, -+ 0, -+ 0, /* Actually 1 but tested separately */ -+}; -+ -+struct sun4i_pwm_data { -+ bool has_prescaler_bypass; -+ bool has_rdy; -+}; -+ -+struct sun4i_pwm_chip { -+ struct pwm_chip chip; -+ struct clk *clk; -+ void __iomem *base; -+ struct mutex ctrl_lock; -+ const struct sun4i_pwm_data *data; -+}; -+ -+static inline struct sun4i_pwm_chip *to_sun4i_pwm_chip(struct pwm_chip *chip) -+{ -+ return container_of(chip, struct sun4i_pwm_chip, chip); -+} -+ -+static inline u32 sun4i_pwm_readl(struct sun4i_pwm_chip *chip, -+ unsigned long offset) -+{ -+ return readl(chip->base + offset); -+} -+ -+static inline void sun4i_pwm_writel(struct sun4i_pwm_chip *chip, -+ u32 val, unsigned long offset) -+{ -+ writel(val, chip->base + offset); -+} -+ -+static int sun4i_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, -+ int duty_ns, int period_ns) -+{ -+ struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip); -+ u32 clk_rate, prd, dty, val, clk_gate; -+ u64 div = 0; -+ unsigned int prescaler = 0; -+ int err; -+ -+ clk_rate = clk_get_rate(sun4i_pwm->clk); -+ -+ if (sun4i_pwm->data->has_prescaler_bypass) { -+ /* First, test without any prescaler when available */ -+ prescaler = PWM_PRESCAL_MASK; -+ /* -+ * When not using any prescaler, the clock period in nanoseconds -+ * is not an integer so round it half up instead of -+ * truncating to get less surprising values. -+ */ -+ div = clk_rate * (u64)period_ns + NSEC_PER_SEC/2; -+ do_div(div, NSEC_PER_SEC); -+ if (div - 1 > PWM_PRD_MASK) -+ prescaler = 0; -+ } -+ -+ if (prescaler == 0) { -+ /* Go up from the first divider */ -+ for (prescaler = 0; prescaler < PWM_PRESCAL_MASK; prescaler++) { -+ if (!prescaler_table[prescaler]) -+ continue; -+ div = clk_rate / prescaler_table[prescaler]; -+ div = div * (u64)period_ns; -+ do_div(div, NSEC_PER_SEC); -+ if (div - 1 <= PWM_PRD_MASK) -+ break; -+ } -+ -+ if (div - 1 > PWM_PRD_MASK) { -+ dev_err(chip->dev, "period exceeds the maximum value\n"); -+ return -EINVAL; -+ } -+ } -+ -+ prd = div; -+ div *= duty_ns; -+ do_div(div, period_ns); -+ dty = div; -+ -+ err = clk_prepare_enable(sun4i_pwm->clk); -+ if (err) { -+ dev_err(chip->dev, "failed to enable PWM clock\n"); -+ return err; -+ } -+ -+ mutex_lock(&sun4i_pwm->ctrl_lock); -+ val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); -+ -+ if (sun4i_pwm->data->has_rdy && (val & PWM_RDY(pwm->hwpwm))) { -+ mutex_unlock(&sun4i_pwm->ctrl_lock); -+ clk_disable_unprepare(sun4i_pwm->clk); -+ return -EBUSY; -+ } -+ -+ clk_gate = val & BIT_CH(PWM_CLK_GATING, pwm->hwpwm); -+ if (clk_gate) { -+ val &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm); -+ sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG); -+ } -+ -+ val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); -+ val &= ~BIT_CH(PWM_PRESCAL_MASK, pwm->hwpwm); -+ val |= BIT_CH(prescaler, pwm->hwpwm); -+ sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG); -+ -+ val = (dty & PWM_DTY_MASK) | PWM_PRD(prd); -+ sun4i_pwm_writel(sun4i_pwm, val, PWM_CH_PRD(pwm->hwpwm)); -+ -+ if (clk_gate) { -+ val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); -+ val |= clk_gate; -+ sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG); -+ } -+ -+ mutex_unlock(&sun4i_pwm->ctrl_lock); -+ clk_disable_unprepare(sun4i_pwm->clk); -+ -+ return 0; -+} -+ -+static int sun4i_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, -+ enum pwm_polarity polarity) -+{ -+ struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip); -+ u32 val; -+ int ret; -+ -+ ret = clk_prepare_enable(sun4i_pwm->clk); -+ if (ret) { -+ dev_err(chip->dev, "failed to enable PWM clock\n"); -+ return ret; -+ } -+ -+ mutex_lock(&sun4i_pwm->ctrl_lock); -+ val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); -+ -+ if (polarity != PWM_POLARITY_NORMAL) -+ val &= ~BIT_CH(PWM_ACT_STATE, pwm->hwpwm); -+ else -+ val |= BIT_CH(PWM_ACT_STATE, pwm->hwpwm); -+ -+ sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG); -+ -+ mutex_unlock(&sun4i_pwm->ctrl_lock); -+ clk_disable_unprepare(sun4i_pwm->clk); -+ -+ return 0; -+} -+ -+static int sun4i_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) -+{ -+ struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip); -+ u32 val; -+ int ret; -+ -+ ret = clk_prepare_enable(sun4i_pwm->clk); -+ if (ret) { -+ dev_err(chip->dev, "failed to enable PWM clock\n"); -+ return ret; -+ } -+ -+ mutex_lock(&sun4i_pwm->ctrl_lock); -+ val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); -+ val |= BIT_CH(PWM_EN, pwm->hwpwm); -+ val |= BIT_CH(PWM_CLK_GATING, pwm->hwpwm); -+ sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG); -+ mutex_unlock(&sun4i_pwm->ctrl_lock); -+ -+ return 0; -+} -+ -+static void sun4i_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) -+{ -+ struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip); -+ u32 val; -+ -+ mutex_lock(&sun4i_pwm->ctrl_lock); -+ val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); -+ val &= ~BIT_CH(PWM_EN, pwm->hwpwm); -+ val &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm); -+ sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG); -+ mutex_unlock(&sun4i_pwm->ctrl_lock); -+ -+ clk_disable_unprepare(sun4i_pwm->clk); -+} -+ -+static const struct pwm_ops sun4i_pwm_ops = { -+ .config = sun4i_pwm_config, -+ .set_polarity = sun4i_pwm_set_polarity, -+ .enable = sun4i_pwm_enable, -+ .disable = sun4i_pwm_disable, -+ .owner = THIS_MODULE, -+}; -+ -+static const struct sun4i_pwm_data sun4i_pwm_data_a10 = { -+ .has_prescaler_bypass = false, -+ .has_rdy = false, -+}; -+ -+static const struct sun4i_pwm_data sun4i_pwm_data_a20 = { -+ .has_prescaler_bypass = true, -+ .has_rdy = true, -+}; -+ -+static const struct of_device_id sun4i_pwm_dt_ids[] = { -+ { -+ .compatible = "allwinner,sun4i-a10-pwm", -+ .data = &sun4i_pwm_data_a10, -+ }, { -+ .compatible = "allwinner,sun7i-a20-pwm", -+ .data = &sun4i_pwm_data_a20, -+ }, { -+ /* sentinel */ -+ }, -+}; -+MODULE_DEVICE_TABLE(of, sun4i_pwm_dt_ids); -+ -+static int sun4i_pwm_probe(struct platform_device *pdev) -+{ -+ struct sun4i_pwm_chip *pwm; -+ struct resource *res; -+ u32 val; -+ int i, ret; -+ const struct of_device_id *match; -+ -+ match = of_match_device(sun4i_pwm_dt_ids, &pdev->dev); -+ -+ pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL); -+ if (!pwm) -+ return -ENOMEM; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ pwm->base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(pwm->base)) -+ return PTR_ERR(pwm->base); -+ -+ pwm->clk = devm_clk_get(&pdev->dev, NULL); -+ if (IS_ERR(pwm->clk)) -+ return PTR_ERR(pwm->clk); -+ -+ pwm->chip.dev = &pdev->dev; -+ pwm->chip.ops = &sun4i_pwm_ops; -+ pwm->chip.base = -1; -+ pwm->chip.npwm = 2; -+ pwm->chip.can_sleep = true; -+ pwm->chip.of_xlate = of_pwm_xlate_with_flags; -+ pwm->chip.of_pwm_n_cells = 3; -+ pwm->data = match->data; -+ -+ mutex_init(&pwm->ctrl_lock); -+ -+ ret = pwmchip_add(&pwm->chip); -+ if (ret < 0) { -+ dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret); -+ goto error; -+ } -+ -+ platform_set_drvdata(pdev, pwm); -+ -+ ret = clk_prepare_enable(pwm->clk); -+ if (ret) { -+ dev_err(&pdev->dev, "failed to enable PWM clock\n"); -+ goto clk_error; -+ } -+ -+ val = sun4i_pwm_readl(pwm, PWM_CTRL_REG); -+ for (i = 0; i < pwm->chip.npwm; i++) { -+ if (!(val & BIT_CH(PWM_ACT_STATE, i))) -+ pwm->chip.pwms[i].polarity = PWM_POLARITY_INVERSED; -+ } -+ clk_disable_unprepare(pwm->clk); -+ -+ return 0; -+ -+clk_error: -+ pwmchip_remove(&pwm->chip); -+ -+error: -+ mutex_destroy(&pwm->ctrl_lock); -+ return ret; -+} -+ -+static int sun4i_pwm_remove(struct platform_device *pdev) -+{ -+ struct sun4i_pwm_chip *pwm = platform_get_drvdata(pdev); -+ -+ mutex_destroy(&pwm->ctrl_lock); -+ -+ return pwmchip_remove(&pwm->chip); -+} -+ -+static struct platform_driver sun4i_pwm_driver = { -+ .driver = { -+ .name = "sun4i-pwm", -+ .of_match_table = sun4i_pwm_dt_ids, -+ }, -+ .probe = sun4i_pwm_probe, -+ .remove = sun4i_pwm_remove, -+}; -+module_platform_driver(sun4i_pwm_driver); -+ -+MODULE_ALIAS("platform:sun4i-pwm"); -+MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>"); -+MODULE_DESCRIPTION("Allwinner sun4i PWM driver"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/sunxi/patches-3.18/200-mmc-add-sdio-function-subnode.patch b/target/linux/sunxi/patches-3.18/200-mmc-add-sdio-function-subnode.patch deleted file mode 100644 index dcbb3a4..0000000 --- a/target/linux/sunxi/patches-3.18/200-mmc-add-sdio-function-subnode.patch +++ /dev/null @@ -1,140 +0,0 @@ -From 8c2057afe84c074ef7cd3ee2ec8e9bed835b9e93 Mon Sep 17 00:00:00 2001 -From: Sascha Hauer <s.hauer@pengutronix.de> -Date: Wed, 21 May 2014 19:50:04 +0200 -Subject: [PATCH] mmc: Add SDIO function devicetree subnode parsing - -This adds SDIO devicetree subnode parsing to the mmc core. While -SDIO devices are runtime probable they sometimes need nonprobable -additional information on embedded systems, like an additional gpio -interrupt or a clock. This patch makes it possible to supply this -information from the devicetree. SDIO drivers will find a pointer -to the devicenode in their devices of_node pointer. - -Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> -[hdegoede@redhat.com: Misc. cleanups] -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - drivers/mmc/core/bus.c | 4 ++++ - drivers/mmc/core/core.c | 28 ++++++++++++++++++++++++++++ - drivers/mmc/core/core.h | 3 +++ - drivers/mmc/core/sdio_bus.c | 11 +++++++++++ - 4 files changed, 46 insertions(+) - ---- a/drivers/mmc/core/bus.c -+++ b/drivers/mmc/core/bus.c -@@ -16,6 +16,7 @@ - #include <linux/err.h> - #include <linux/slab.h> - #include <linux/stat.h> -+#include <linux/of.h> - #include <linux/pm_runtime.h> - - #include <linux/mmc/card.h> -@@ -352,6 +353,8 @@ int mmc_add_card(struct mmc_card *card) - #endif - mmc_init_context_info(card->host); - -+ card->dev.of_node = mmc_of_find_child_device(card->host, 0); -+ - ret = device_add(&card->dev); - if (ret) - return ret; -@@ -380,6 +383,7 @@ void mmc_remove_card(struct mmc_card *ca - mmc_hostname(card->host), card->rca); - } - device_del(&card->dev); -+ of_node_put(card->dev.of_node); - } - - put_device(&card->dev); ---- a/drivers/mmc/core/core.c -+++ b/drivers/mmc/core/core.c -@@ -1231,6 +1231,34 @@ EXPORT_SYMBOL(mmc_of_parse_voltage); - - #endif /* CONFIG_OF */ - -+static int mmc_of_get_func_num(struct device_node *node) -+{ -+ u32 reg; -+ int ret; -+ -+ ret = of_property_read_u32(node, "reg", ®); -+ if (ret < 0) -+ return ret; -+ -+ return reg; -+} -+ -+struct device_node *mmc_of_find_child_device(struct mmc_host *host, -+ unsigned func_num) -+{ -+ struct device_node *node; -+ -+ if (!host->parent || !host->parent->of_node) -+ return NULL; -+ -+ for_each_child_of_node(host->parent->of_node, node) { -+ if (mmc_of_get_func_num(node) == func_num) -+ return node; -+ } -+ -+ return NULL; -+} -+ - #ifdef CONFIG_REGULATOR - - /** ---- a/drivers/mmc/core/core.h -+++ b/drivers/mmc/core/core.h -@@ -32,6 +32,9 @@ struct mmc_bus_ops { - void mmc_attach_bus(struct mmc_host *host, const struct mmc_bus_ops *ops); - void mmc_detach_bus(struct mmc_host *host); - -+struct device_node *mmc_of_find_child_device(struct mmc_host *host, -+ unsigned func_num); -+ - void mmc_init_erase(struct mmc_card *card); - - void mmc_set_chip_select(struct mmc_host *host, int mode); ---- a/drivers/mmc/core/sdio_bus.c -+++ b/drivers/mmc/core/sdio_bus.c -@@ -22,7 +22,9 @@ - #include <linux/mmc/card.h> - #include <linux/mmc/host.h> - #include <linux/mmc/sdio_func.h> -+#include <linux/of.h> - -+#include "core.h" - #include "sdio_cis.h" - #include "sdio_bus.h" - -@@ -303,6 +305,13 @@ static void sdio_acpi_set_handle(struct - static inline void sdio_acpi_set_handle(struct sdio_func *func) {} - #endif - -+static void sdio_set_of_node(struct sdio_func *func) -+{ -+ struct mmc_host *host = func->card->host; -+ -+ func->dev.of_node = mmc_of_find_child_device(host, func->num); -+} -+ - /* - * Register a new SDIO function with the driver model. - */ -@@ -312,6 +321,7 @@ int sdio_add_func(struct sdio_func *func - - dev_set_name(&func->dev, "%s:%d", mmc_card_id(func->card), func->num); - -+ sdio_set_of_node(func); - sdio_acpi_set_handle(func); - ret = device_add(&func->dev); - if (ret == 0) { -@@ -335,6 +345,7 @@ void sdio_remove_func(struct sdio_func * - - dev_pm_domain_detach(&func->dev, false); - device_del(&func->dev); -+ of_node_put(func->dev.of_node); - put_device(&func->dev); - } - diff --git a/target/linux/sunxi/patches-3.18/201-dt-sun7i-add-oob-irq-to-bcm-sdio-wifi.patch b/target/linux/sunxi/patches-3.18/201-dt-sun7i-add-oob-irq-to-bcm-sdio-wifi.patch deleted file mode 100644 index e2cfeb7..0000000 --- a/target/linux/sunxi/patches-3.18/201-dt-sun7i-add-oob-irq-to-bcm-sdio-wifi.patch +++ /dev/null @@ -1,64 +0,0 @@ -From e4127db9b980a5684c537d9010ed2aaa05a1e79a Mon Sep 17 00:00:00 2001 -From: Hans de Goede <hdegoede@redhat.com> -Date: Sat, 24 May 2014 20:53:49 +0200 -Subject: [PATCH] ARM: dts: sun7i: Add OOB irq support to boards with broadcom - sdio wifi - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 11 +++++++++++ - arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts | 11 +++++++++++ - 2 files changed, 22 insertions(+) - ---- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -@@ -31,12 +31,23 @@ - }; - - mmc3: mmc@01c12000 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; - vmmc-supply = <®_vmmc3>; - bus-width = <4>; - non-removable; - status = "okay"; -+ -+ brcmf: bcrmf@1 { -+ reg = <1>; -+ compatible = "brcm,bcm4329-fmac"; -+ interrupt-parent = <&pio>; -+ interrupts = <10 8>; /* PH10 / EINT10 */ -+ interrupt-names = "host-wake"; -+ }; - }; - - usbphy: phy@01c13400 { ---- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts -+++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts -@@ -29,12 +29,23 @@ - }; - - mmc3: mmc@01c12000 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; - vmmc-supply = <®_vmmc3>; - bus-width = <4>; - non-removable; - status = "okay"; -+ -+ brcmf: bcrmf@1 { -+ reg = <1>; -+ compatible = "brcm,bcm4329-fmac"; -+ interrupt-parent = <&pio>; -+ interrupts = <10 8>; /* PH10 / EINT10 */ -+ interrupt-names = "host-wake"; -+ }; - }; - - usbphy: phy@01c13400 { diff --git a/target/linux/sunxi/patches-3.18/202-dt-sun7i-add-bluetooth-to-cubietruck.patch b/target/linux/sunxi/patches-3.18/202-dt-sun7i-add-bluetooth-to-cubietruck.patch deleted file mode 100644 index 9c0d969..0000000 --- a/target/linux/sunxi/patches-3.18/202-dt-sun7i-add-bluetooth-to-cubietruck.patch +++ /dev/null @@ -1,73 +0,0 @@ -From c6e2b7dad39a7887f935458d1c8de84db06243e1 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai <wens@csie.org> -Date: Thu, 26 Dec 2013 17:15:47 +0800 -Subject: [PATCH] ARM: dts: sun7i: add bluetooth module to CubieTruck DTS - -The CubieTruck has an AMPAK AP6210 WiFi+Bluetooth module. The -Bluetooth part is a BCM20710 IC connected to UART2 in the A20 -SoC. The IC also takes a 32.768 KHz low power clock input, a power -enable signal and a wake signal via GPIO. - -The Bluetooth module supports out-of-band interrupt signaling via -GPIO, but this is not supported in this patch. ---- - arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 36 ++++++++++++++++++++++++++++++ - 1 file changed, 36 insertions(+) - ---- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -@@ -103,6 +103,20 @@ - allwinner,drive = <0>; - allwinner,pull = <0>; - }; -+ -+ bt_pwr_pin: bt_pwr_pin@0 { -+ allwinner,pins = "PH18"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ bt_wake_pin: bt_wake_pin@0 { -+ allwinner,pins = "PH24"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; - }; - - pwm: pwm@01c20e00 { -@@ -123,6 +137,12 @@ - status = "okay"; - }; - -+ uart2: serial@01c28800 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart2_pins_a>; -+ status = "okay"; -+ }; -+ - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; -@@ -214,4 +234,20 @@ - enable-active-high; - gpio = <&pio 7 9 0>; - }; -+ -+ rfkill-switches { -+ compatible = "simple-bus"; -+ pinctrl-names = "default"; -+ -+ rfkill_bt { -+ compatible = "rfkill-gpio"; -+ pinctrl-0 = <&bt_pwr_pin>, <&clk_out_a_pins_a>; -+ rfkill-name = "bt"; -+ rfkill-type = <2>; -+ bt_shutdown-gpios = <0>, <&pio 7 18 0>; /* PH18 */ -+ bt_reset-gpios = <&pio 7 24 0>; /* PH24 */ -+ clocks = <&clk_out_a>; -+ clock-frequency = <32768>; -+ }; -+ }; - }; diff --git a/target/linux/sunxi/patches-3.18/270-dt-sun7i-add-ss-to-a20.patch b/target/linux/sunxi/patches-3.18/270-dt-sun7i-add-ss-to-a20.patch deleted file mode 100644 index f03e2d9..0000000 --- a/target/linux/sunxi/patches-3.18/270-dt-sun7i-add-ss-to-a20.patch +++ /dev/null @@ -1,17 +0,0 @@ ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -577,6 +577,14 @@ - status = "disabled"; - }; - -+ crypto: crypto-engine@01c15000 { -+ compatible = "allwinner,sun7i-a20-crypto"; -+ reg = <0x01c15000 0x1000>; -+ interrupts = <0 86 4>; -+ clocks = <&ahb_gates 5>, <&ss_clk>; -+ clock-names = "ahb", "mod"; -+ }; -+ - spi2: spi@01c17000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c17000 0x1000>; diff --git a/target/linux/sunxi/patches-3.18/271-crypto-add-ss.patch b/target/linux/sunxi/patches-3.18/271-crypto-add-ss.patch deleted file mode 100644 index 0788c6f..0000000 --- a/target/linux/sunxi/patches-3.18/271-crypto-add-ss.patch +++ /dev/null @@ -1,1493 +0,0 @@ ---- a/drivers/crypto/Kconfig -+++ b/drivers/crypto/Kconfig -@@ -437,4 +437,21 @@ config CRYPTO_DEV_QCE - hardware. To compile this driver as a module, choose M here. The - module will be called qcrypto. - -+config CRYPTO_DEV_SUNXI_SS -+ tristate "Support for Allwinner Security System cryptographic accelerator" -+ depends on ARCH_SUNXI -+ select CRYPTO_MD5 -+ select CRYPTO_SHA1 -+ select CRYPTO_AES -+ select CRYPTO_DES -+ select CRYPTO_BLKCIPHER -+ help -+ Some Allwinner SoC have a crypto accelerator named -+ Security System. Select this if you want to use it. -+ The Security System handle AES/DES/3DES ciphers in CBC mode -+ and SHA1 and MD5 hash algorithms. -+ -+ To compile this driver as a module, choose M here: the module -+ will be called sunxi-ss. -+ - endif # CRYPTO_HW ---- a/drivers/crypto/Makefile -+++ b/drivers/crypto/Makefile -@@ -25,3 +25,4 @@ obj-$(CONFIG_CRYPTO_DEV_TALITOS) += tali - obj-$(CONFIG_CRYPTO_DEV_UX500) += ux500/ - obj-$(CONFIG_CRYPTO_DEV_QAT) += qat/ - obj-$(CONFIG_CRYPTO_DEV_QCE) += qce/ -+obj-$(CONFIG_CRYPTO_DEV_SUNXI_SS) += sunxi-ss/ ---- /dev/null -+++ b/drivers/crypto/sunxi-ss/Makefile -@@ -0,0 +1,2 @@ -+obj-$(CONFIG_CRYPTO_DEV_SUNXI_SS) += sunxi-ss.o -+sunxi-ss-y += sunxi-ss-core.o sunxi-ss-hash.o sunxi-ss-cipher.o ---- /dev/null -+++ b/drivers/crypto/sunxi-ss/sunxi-ss-cipher.c -@@ -0,0 +1,489 @@ -+/* -+ * sunxi-ss-cipher.c - hardware cryptographic accelerator for Allwinner A20 SoC -+ * -+ * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@gmail.com> -+ * -+ * This file add support for AES cipher with 128,192,256 bits -+ * keysize in CBC mode. -+ * Add support also for DES and 3DES in CBC mode. -+ * -+ * You could find the datasheet in Documentation/arm/sunxi/README -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+#include "sunxi-ss.h" -+ -+extern struct sunxi_ss_ctx *ss; -+ -+static int sunxi_ss_cipher(struct ablkcipher_request *areq, u32 mode) -+{ -+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); -+ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); -+ const char *cipher_type; -+ -+ if (areq->nbytes == 0) -+ return 0; -+ -+ if (areq->info == NULL) { -+ dev_err(ss->dev, "ERROR: Empty IV\n"); -+ return -EINVAL; -+ } -+ -+ if (areq->src == NULL || areq->dst == NULL) { -+ dev_err(ss->dev, "ERROR: Some SGs are NULL\n"); -+ return -EINVAL; -+ } -+ -+ cipher_type = crypto_tfm_alg_name(crypto_ablkcipher_tfm(tfm)); -+ -+ if (strcmp("cbc(aes)", cipher_type) == 0) { -+ mode |= SS_OP_AES | SS_CBC | SS_ENABLED | op->keymode; -+ return sunxi_ss_aes_poll(areq, mode); -+ } -+ -+ if (strcmp("cbc(des)", cipher_type) == 0) { -+ mode |= SS_OP_DES | SS_CBC | SS_ENABLED | op->keymode; -+ return sunxi_ss_des_poll(areq, mode); -+ } -+ -+ if (strcmp("cbc(des3_ede)", cipher_type) == 0) { -+ mode |= SS_OP_3DES | SS_CBC | SS_ENABLED | op->keymode; -+ return sunxi_ss_des_poll(areq, mode); -+ } -+ -+ dev_err(ss->dev, "ERROR: Cipher %s not handled\n", cipher_type); -+ return -EINVAL; -+} -+ -+int sunxi_ss_cipher_encrypt(struct ablkcipher_request *areq) -+{ -+ return sunxi_ss_cipher(areq, SS_ENCRYPTION); -+} -+ -+int sunxi_ss_cipher_decrypt(struct ablkcipher_request *areq) -+{ -+ return sunxi_ss_cipher(areq, SS_DECRYPTION); -+} -+ -+int sunxi_ss_cipher_init(struct crypto_tfm *tfm) -+{ -+ struct sunxi_tfm_ctx *op = crypto_tfm_ctx(tfm); -+ -+ memset(op, 0, sizeof(struct sunxi_tfm_ctx)); -+ return 0; -+} -+ -+/* -+ * Optimized function for the case where we have only one SG, -+ * so we can use kmap_atomic -+ */ -+static int sunxi_ss_aes_poll_atomic(struct ablkcipher_request *areq) -+{ -+ u32 spaces; -+ struct scatterlist *in_sg = areq->src; -+ struct scatterlist *out_sg = areq->dst; -+ void *src_addr; -+ void *dst_addr; -+ unsigned int ileft = areq->nbytes; -+ unsigned int oleft = areq->nbytes; -+ unsigned int todo; -+ u32 *src32; -+ u32 *dst32; -+ u32 rx_cnt = 32; -+ u32 tx_cnt = 0; -+ int i; -+ -+ src_addr = kmap_atomic(sg_page(in_sg)) + in_sg->offset; -+ if (src_addr == NULL) { -+ dev_err(ss->dev, "kmap_atomic error for src SG\n"); -+ writel(0, ss->base + SS_CTL); -+ mutex_unlock(&ss->lock); -+ return -EINVAL; -+ } -+ -+ dst_addr = kmap_atomic(sg_page(out_sg)) + out_sg->offset; -+ if (dst_addr == NULL) { -+ dev_err(ss->dev, "kmap_atomic error for dst SG\n"); -+ writel(0, ss->base + SS_CTL); -+ kunmap_atomic(src_addr); -+ mutex_unlock(&ss->lock); -+ return -EINVAL; -+ } -+ -+ src32 = (u32 *)src_addr; -+ dst32 = (u32 *)dst_addr; -+ ileft = areq->nbytes / 4; -+ oleft = areq->nbytes / 4; -+ i = 0; -+ do { -+ if (ileft > 0 && rx_cnt > 0) { -+ todo = min(rx_cnt, ileft); -+ ileft -= todo; -+ do { -+ writel_relaxed(*src32++, -+ ss->base + -+ SS_RXFIFO); -+ todo--; -+ } while (todo > 0); -+ } -+ if (tx_cnt > 0) { -+ todo = min(tx_cnt, oleft); -+ oleft -= todo; -+ do { -+ *dst32++ = readl_relaxed(ss->base + -+ SS_TXFIFO); -+ todo--; -+ } while (todo > 0); -+ } -+ spaces = readl_relaxed(ss->base + SS_FCSR); -+ rx_cnt = SS_RXFIFO_SPACES(spaces); -+ tx_cnt = SS_TXFIFO_SPACES(spaces); -+ } while (oleft > 0); -+ writel(0, ss->base + SS_CTL); -+ kunmap_atomic(src_addr); -+ kunmap_atomic(dst_addr); -+ mutex_unlock(&ss->lock); -+ return 0; -+} -+ -+int sunxi_ss_aes_poll(struct ablkcipher_request *areq, u32 mode) -+{ -+ u32 spaces; -+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); -+ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); -+ unsigned int ivsize = crypto_ablkcipher_ivsize(tfm); -+ /* when activating SS, the default FIFO space is 32 */ -+ u32 rx_cnt = 32; -+ u32 tx_cnt = 0; -+ u32 v; -+ int i; -+ struct scatterlist *in_sg = areq->src; -+ struct scatterlist *out_sg = areq->dst; -+ void *src_addr; -+ void *dst_addr; -+ unsigned int ileft = areq->nbytes; -+ unsigned int oleft = areq->nbytes; -+ unsigned int sgileft = areq->src->length; -+ unsigned int sgoleft = areq->dst->length; -+ unsigned int todo; -+ u32 *src32; -+ u32 *dst32; -+ -+ mutex_lock(&ss->lock); -+ -+ for (i = 0; i < op->keylen; i += 4) -+ writel(*(op->key + i/4), ss->base + SS_KEY0 + i); -+ -+ if (areq->info != NULL) { -+ for (i = 0; i < 4 && i < ivsize / 4; i++) { -+ v = *(u32 *)(areq->info + i * 4); -+ writel(v, ss->base + SS_IV0 + i * 4); -+ } -+ } -+ writel(mode, ss->base + SS_CTL); -+ -+ /* If we have only one SG, we can use kmap_atomic */ -+ if (sg_next(in_sg) == NULL && sg_next(out_sg) == NULL) -+ return sunxi_ss_aes_poll_atomic(areq); -+ -+ /* -+ * If we have more than one SG, we cannot use kmap_atomic since -+ * we hold the mapping too long -+ */ -+ src_addr = kmap(sg_page(in_sg)) + in_sg->offset; -+ if (src_addr == NULL) { -+ dev_err(ss->dev, "KMAP error for src SG\n"); -+ mutex_unlock(&ss->lock); -+ return -EINVAL; -+ } -+ dst_addr = kmap(sg_page(out_sg)) + out_sg->offset; -+ if (dst_addr == NULL) { -+ kunmap(sg_page(in_sg)); -+ dev_err(ss->dev, "KMAP error for dst SG\n"); -+ mutex_unlock(&ss->lock); -+ return -EINVAL; -+ } -+ src32 = (u32 *)src_addr; -+ dst32 = (u32 *)dst_addr; -+ ileft = areq->nbytes / 4; -+ oleft = areq->nbytes / 4; -+ sgileft = in_sg->length / 4; -+ sgoleft = out_sg->length / 4; -+ do { -+ spaces = readl_relaxed(ss->base + SS_FCSR); -+ rx_cnt = SS_RXFIFO_SPACES(spaces); -+ tx_cnt = SS_TXFIFO_SPACES(spaces); -+ todo = min3(rx_cnt, ileft, sgileft); -+ if (todo > 0) { -+ ileft -= todo; -+ sgileft -= todo; -+ } -+ while (todo > 0) { -+ writel_relaxed(*src32++, ss->base + SS_RXFIFO); -+ todo--; -+ } -+ if (in_sg != NULL && sgileft == 0 && ileft > 0) { -+ kunmap(sg_page(in_sg)); -+ in_sg = sg_next(in_sg); -+ while (in_sg != NULL && in_sg->length == 0) -+ in_sg = sg_next(in_sg); -+ if (in_sg != NULL && ileft > 0) { -+ src_addr = kmap(sg_page(in_sg)) + in_sg->offset; -+ if (src_addr == NULL) { -+ dev_err(ss->dev, "ERROR: KMAP for src SG\n"); -+ mutex_unlock(&ss->lock); -+ return -EINVAL; -+ } -+ src32 = src_addr; -+ sgileft = in_sg->length / 4; -+ } -+ } -+ /* do not test oleft since when oleft == 0 we have finished */ -+ todo = min3(tx_cnt, oleft, sgoleft); -+ if (todo > 0) { -+ oleft -= todo; -+ sgoleft -= todo; -+ } -+ while (todo > 0) { -+ *dst32++ = readl_relaxed(ss->base + SS_TXFIFO); -+ todo--; -+ } -+ if (out_sg != NULL && sgoleft == 0 && oleft >= 0) { -+ kunmap(sg_page(out_sg)); -+ out_sg = sg_next(out_sg); -+ while (out_sg != NULL && out_sg->length == 0) -+ out_sg = sg_next(out_sg); -+ if (out_sg != NULL && oleft > 0) { -+ dst_addr = kmap(sg_page(out_sg)) + -+ out_sg->offset; -+ if (dst_addr == NULL) { -+ dev_err(ss->dev, "KMAP error\n"); -+ mutex_unlock(&ss->lock); -+ return -EINVAL; -+ } -+ dst32 = dst_addr; -+ sgoleft = out_sg->length / 4; -+ } -+ } -+ } while (oleft > 0); -+ -+ writel_relaxed(0, ss->base + SS_CTL); -+ mutex_unlock(&ss->lock); -+ return 0; -+} -+ -+/* -+ * Pure CPU way of doing DES/3DES with SS -+ * Since DES and 3DES SGs could be smaller than 4 bytes, I use sg_copy_to_buffer -+ * for "linearize" them. -+ * The problem with that is that I alloc (2 x areq->nbytes) for buf_in/buf_out -+ * TODO: change this system, I need to support other mode than CBC where len -+ * is not a multiple of 4 and the hack of linearize use too much memory -+ * SGsrc -> buf_in -> SS -> buf_out -> SGdst -+ */ -+int sunxi_ss_des_poll(struct ablkcipher_request *areq, u32 mode) -+{ -+ u32 value, spaces; -+ size_t nb_in_sg_tx, nb_in_sg_rx; -+ size_t ir, it; -+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); -+ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); -+ unsigned int ivsize = crypto_ablkcipher_ivsize(tfm); -+ u32 tx_cnt = 0; -+ u32 rx_cnt = 0; -+ u32 v; -+ int i; -+ int no_chunk = 1; -+ struct scatterlist *in_sg = areq->src; -+ struct scatterlist *out_sg = areq->dst; -+ -+ /* -+ * if we have only SGs with size multiple of 4, -+ * we can use the SS AES function -+ */ -+ while (in_sg != NULL && no_chunk == 1) { -+ if ((in_sg->length % 4) != 0) -+ no_chunk = 0; -+ in_sg = sg_next(in_sg); -+ } -+ while (out_sg != NULL && no_chunk == 1) { -+ if ((out_sg->length % 4) != 0) -+ no_chunk = 0; -+ out_sg = sg_next(out_sg); -+ } -+ -+ if (no_chunk == 1) -+ return sunxi_ss_aes_poll(areq, mode); -+ -+ in_sg = areq->src; -+ out_sg = areq->dst; -+ -+ nb_in_sg_rx = sg_nents(in_sg); -+ nb_in_sg_tx = sg_nents(out_sg); -+ -+ /* -+ * buf_in and buf_out are allocated only one time -+ * then we keep the buffer until driver end -+ * the allocation can only grow more -+ * we do not reduce it for simplification -+ */ -+ mutex_lock(&ss->bufin_lock); -+ if (ss->buf_in == NULL) { -+ ss->buf_in = kmalloc(areq->nbytes, GFP_KERNEL); -+ ss->buf_in_size = areq->nbytes; -+ } else { -+ if (areq->nbytes > ss->buf_in_size) { -+ kfree(ss->buf_in); -+ ss->buf_in = kmalloc(areq->nbytes, GFP_KERNEL); -+ ss->buf_in_size = areq->nbytes; -+ } -+ } -+ if (ss->buf_in == NULL) { -+ ss->buf_in_size = 0; -+ mutex_unlock(&ss->bufin_lock); -+ dev_err(ss->dev, "Unable to allocate pages.\n"); -+ return -ENOMEM; -+ } -+ mutex_lock(&ss->bufout_lock); -+ if (ss->buf_out == NULL) { -+ ss->buf_out = kmalloc(areq->nbytes, GFP_KERNEL); -+ if (ss->buf_out == NULL) { -+ ss->buf_out_size = 0; -+ mutex_unlock(&ss->bufin_lock); -+ mutex_unlock(&ss->bufout_lock); -+ dev_err(ss->dev, "Unable to allocate pages.\n"); -+ return -ENOMEM; -+ } -+ ss->buf_out_size = areq->nbytes; -+ } else { -+ if (areq->nbytes > ss->buf_out_size) { -+ kfree(ss->buf_out); -+ ss->buf_out = kmalloc(areq->nbytes, GFP_KERNEL); -+ if (ss->buf_out == NULL) { -+ ss->buf_out_size = 0; -+ mutex_unlock(&ss->bufin_lock); -+ mutex_unlock(&ss->bufout_lock); -+ dev_err(ss->dev, "Unable to allocate pages.\n"); -+ return -ENOMEM; -+ } -+ ss->buf_out_size = areq->nbytes; -+ } -+ } -+ -+ sg_copy_to_buffer(areq->src, nb_in_sg_rx, ss->buf_in, areq->nbytes); -+ -+ ir = 0; -+ it = 0; -+ mutex_lock(&ss->lock); -+ -+ for (i = 0; i < op->keylen; i += 4) -+ writel(*(op->key + i/4), ss->base + SS_KEY0 + i); -+ if (areq->info != NULL) { -+ for (i = 0; i < 4 && i < ivsize / 4; i++) { -+ v = *(u32 *)(areq->info + i * 4); -+ writel(v, ss->base + SS_IV0 + i * 4); -+ } -+ } -+ writel(mode, ss->base + SS_CTL); -+ -+ do { -+ if (rx_cnt == 0 || tx_cnt == 0) { -+ spaces = readl(ss->base + SS_FCSR); -+ rx_cnt = SS_RXFIFO_SPACES(spaces); -+ tx_cnt = SS_TXFIFO_SPACES(spaces); -+ } -+ if (rx_cnt > 0 && ir < areq->nbytes) { -+ do { -+ value = *(u32 *)(ss->buf_in + ir); -+ writel(value, ss->base + SS_RXFIFO); -+ ir += 4; -+ rx_cnt--; -+ } while (rx_cnt > 0 && ir < areq->nbytes); -+ } -+ if (tx_cnt > 0 && it < areq->nbytes) { -+ do { -+ value = readl(ss->base + SS_TXFIFO); -+ *(u32 *)(ss->buf_out + it) = value; -+ it += 4; -+ tx_cnt--; -+ } while (tx_cnt > 0 && it < areq->nbytes); -+ } -+ if (ir == areq->nbytes) { -+ mutex_unlock(&ss->bufin_lock); -+ ir++; -+ } -+ } while (it < areq->nbytes); -+ -+ writel(0, ss->base + SS_CTL); -+ mutex_unlock(&ss->lock); -+ -+ /* -+ * a simple optimization, since we dont need the hardware for this copy -+ * we release the lock and do the copy. With that we gain 5/10% perf -+ */ -+ sg_copy_from_buffer(areq->dst, nb_in_sg_tx, ss->buf_out, areq->nbytes); -+ -+ mutex_unlock(&ss->bufout_lock); -+ return 0; -+} -+ -+/* check and set the AES key, prepare the mode to be used */ -+int sunxi_ss_aes_setkey(struct crypto_ablkcipher *tfm, const u8 *key, -+ unsigned int keylen) -+{ -+ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); -+ -+ switch (keylen) { -+ case 128 / 8: -+ op->keymode = SS_AES_128BITS; -+ break; -+ case 192 / 8: -+ op->keymode = SS_AES_192BITS; -+ break; -+ case 256 / 8: -+ op->keymode = SS_AES_256BITS; -+ break; -+ default: -+ dev_err(ss->dev, "ERROR: Invalid keylen %u\n", keylen); -+ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); -+ return -EINVAL; -+ } -+ op->keylen = keylen; -+ memcpy(op->key, key, keylen); -+ return 0; -+} -+ -+/* check and set the DES key, prepare the mode to be used */ -+int sunxi_ss_des_setkey(struct crypto_ablkcipher *tfm, const u8 *key, -+ unsigned int keylen) -+{ -+ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); -+ -+ if (keylen != DES_KEY_SIZE) { -+ dev_err(ss->dev, "Invalid keylen %u\n", keylen); -+ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); -+ return -EINVAL; -+ } -+ op->keylen = keylen; -+ memcpy(op->key, key, keylen); -+ return 0; -+} -+ -+/* check and set the 3DES key, prepare the mode to be used */ -+int sunxi_ss_des3_setkey(struct crypto_ablkcipher *tfm, const u8 *key, -+ unsigned int keylen) -+{ -+ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); -+ -+ if (keylen != 3 * DES_KEY_SIZE) { -+ dev_err(ss->dev, "Invalid keylen %u\n", keylen); -+ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); -+ return -EINVAL; -+ } -+ op->keylen = keylen; -+ memcpy(op->key, key, keylen); -+ return 0; -+} ---- /dev/null -+++ b/drivers/crypto/sunxi-ss/sunxi-ss-core.c -@@ -0,0 +1,318 @@ -+/* -+ * sunxi-ss-core.c - hardware cryptographic accelerator for Allwinner A20 SoC -+ * -+ * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@gmail.com> -+ * -+ * Core file which registers crypto algorithms supported by the SS. -+ * -+ * You could find a link for the datasheet in Documentation/arm/sunxi/README -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+#include <linux/clk.h> -+#include <linux/crypto.h> -+#include <linux/io.h> -+#include <linux/module.h> -+#include <linux/of.h> -+#include <linux/platform_device.h> -+#include <crypto/scatterwalk.h> -+#include <linux/scatterlist.h> -+#include <linux/interrupt.h> -+#include <linux/delay.h> -+ -+#include "sunxi-ss.h" -+ -+struct sunxi_ss_ctx *ss; -+ -+/* -+ * General notes for whole driver: -+ * -+ * After each request the device must be disabled with a write of 0 in SS_CTL -+ * -+ * For performance reason, we use writel_relaxed/read_relaxed for all -+ * operations on RX and TX FIFO and also SS_FCSR. -+ * Excepts for the last write on TX FIFO. -+ * For all other registers, we use writel/readl. -+ * See http://permalink.gmane.org/gmane.linux.ports.arm.kernel/117644 -+ * and http://permalink.gmane.org/gmane.linux.ports.arm.kernel/117640 -+ */ -+ -+static struct ahash_alg sunxi_md5_alg = { -+ .init = sunxi_hash_init, -+ .update = sunxi_hash_update, -+ .final = sunxi_hash_final, -+ .finup = sunxi_hash_finup, -+ .digest = sunxi_hash_digest, -+ .halg = { -+ .digestsize = MD5_DIGEST_SIZE, -+ .base = { -+ .cra_name = "md5", -+ .cra_driver_name = "md5-sunxi-ss", -+ .cra_priority = 300, -+ .cra_alignmask = 3, -+ .cra_flags = CRYPTO_ALG_TYPE_AHASH | CRYPTO_ALG_ASYNC, -+ .cra_blocksize = MD5_HMAC_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct sunxi_req_ctx), -+ .cra_module = THIS_MODULE, -+ .cra_type = &crypto_ahash_type, -+ .cra_init = sunxi_hash_crainit -+ } -+ } -+}; -+ -+static struct ahash_alg sunxi_sha1_alg = { -+ .init = sunxi_hash_init, -+ .update = sunxi_hash_update, -+ .final = sunxi_hash_final, -+ .finup = sunxi_hash_finup, -+ .digest = sunxi_hash_digest, -+ .halg = { -+ .digestsize = SHA1_DIGEST_SIZE, -+ .base = { -+ .cra_name = "sha1", -+ .cra_driver_name = "sha1-sunxi-ss", -+ .cra_priority = 300, -+ .cra_alignmask = 3, -+ .cra_flags = CRYPTO_ALG_TYPE_AHASH | CRYPTO_ALG_ASYNC, -+ .cra_blocksize = SHA1_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct sunxi_req_ctx), -+ .cra_module = THIS_MODULE, -+ .cra_type = &crypto_ahash_type, -+ .cra_init = sunxi_hash_crainit -+ } -+ } -+}; -+ -+static struct crypto_alg sunxi_cipher_algs[] = { -+{ -+ .cra_name = "cbc(aes)", -+ .cra_driver_name = "cbc-aes-sunxi-ss", -+ .cra_priority = 300, -+ .cra_blocksize = AES_BLOCK_SIZE, -+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER, -+ .cra_ctxsize = sizeof(struct sunxi_tfm_ctx), -+ .cra_module = THIS_MODULE, -+ .cra_alignmask = 3, -+ .cra_type = &crypto_ablkcipher_type, -+ .cra_init = sunxi_ss_cipher_init, -+ .cra_u = { -+ .ablkcipher = { -+ .min_keysize = AES_MIN_KEY_SIZE, -+ .max_keysize = AES_MAX_KEY_SIZE, -+ .ivsize = AES_BLOCK_SIZE, -+ .setkey = sunxi_ss_aes_setkey, -+ .encrypt = sunxi_ss_cipher_encrypt, -+ .decrypt = sunxi_ss_cipher_decrypt, -+ } -+ } -+}, { -+ .cra_name = "cbc(des)", -+ .cra_driver_name = "cbc-des-sunxi-ss", -+ .cra_priority = 300, -+ .cra_blocksize = DES_BLOCK_SIZE, -+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER, -+ .cra_ctxsize = sizeof(struct sunxi_req_ctx), -+ .cra_module = THIS_MODULE, -+ .cra_alignmask = 3, -+ .cra_type = &crypto_ablkcipher_type, -+ .cra_init = sunxi_ss_cipher_init, -+ .cra_u.ablkcipher = { -+ .min_keysize = DES_KEY_SIZE, -+ .max_keysize = DES_KEY_SIZE, -+ .ivsize = DES_BLOCK_SIZE, -+ .setkey = sunxi_ss_des_setkey, -+ .encrypt = sunxi_ss_cipher_encrypt, -+ .decrypt = sunxi_ss_cipher_decrypt, -+ } -+}, { -+ .cra_name = "cbc(des3_ede)", -+ .cra_driver_name = "cbc-des3-sunxi-ss", -+ .cra_priority = 300, -+ .cra_blocksize = DES3_EDE_BLOCK_SIZE, -+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER, -+ .cra_ctxsize = sizeof(struct sunxi_req_ctx), -+ .cra_module = THIS_MODULE, -+ .cra_alignmask = 3, -+ .cra_type = &crypto_ablkcipher_type, -+ .cra_init = sunxi_ss_cipher_init, -+ .cra_u.ablkcipher = { -+ .min_keysize = DES3_EDE_KEY_SIZE, -+ .max_keysize = DES3_EDE_KEY_SIZE, -+ .ivsize = DES3_EDE_BLOCK_SIZE, -+ .setkey = sunxi_ss_des3_setkey, -+ .encrypt = sunxi_ss_cipher_encrypt, -+ .decrypt = sunxi_ss_cipher_decrypt, -+ } -+} -+}; -+ -+static int sunxi_ss_probe(struct platform_device *pdev) -+{ -+ struct resource *res; -+ u32 v; -+ int err; -+ unsigned long cr; -+ const unsigned long cr_ahb = 24 * 1000 * 1000; -+ const unsigned long cr_mod = 150 * 1000 * 1000; -+ -+ if (!pdev->dev.of_node) -+ return -ENODEV; -+ -+ ss = devm_kzalloc(&pdev->dev, sizeof(*ss), GFP_KERNEL); -+ if (ss == NULL) -+ return -ENOMEM; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ ss->base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(ss->base)) { -+ dev_err(&pdev->dev, "Cannot request MMIO\n"); -+ return PTR_ERR(ss->base); -+ } -+ -+ ss->ssclk = devm_clk_get(&pdev->dev, "mod"); -+ if (IS_ERR(ss->ssclk)) { -+ err = PTR_ERR(ss->ssclk); -+ dev_err(&pdev->dev, "Cannot get SS clock err=%d\n", err); -+ return err; -+ } -+ dev_dbg(&pdev->dev, "clock ss acquired\n"); -+ -+ ss->busclk = devm_clk_get(&pdev->dev, "ahb"); -+ if (IS_ERR(ss->busclk)) { -+ err = PTR_ERR(ss->busclk); -+ dev_err(&pdev->dev, "Cannot get AHB SS clock err=%d\n", err); -+ return err; -+ } -+ dev_dbg(&pdev->dev, "clock ahb_ss acquired\n"); -+ -+ /* Enable both clocks */ -+ err = clk_prepare_enable(ss->busclk); -+ if (err != 0) { -+ dev_err(&pdev->dev, "Cannot prepare_enable busclk\n"); -+ return err; -+ } -+ err = clk_prepare_enable(ss->ssclk); -+ if (err != 0) { -+ dev_err(&pdev->dev, "Cannot prepare_enable ssclk\n"); -+ clk_disable_unprepare(ss->busclk); -+ return err; -+ } -+ -+ /* -+ * Check that clock have the correct rates gived in the datasheet -+ * Try to set the clock to the maximum allowed -+ */ -+ err = clk_set_rate(ss->ssclk, cr_mod); -+ if (err != 0) { -+ dev_err(&pdev->dev, "Cannot set clock rate to ssclk\n"); -+ clk_disable_unprepare(ss->ssclk); -+ clk_disable_unprepare(ss->busclk); -+ return err; -+ } -+ -+ cr = clk_get_rate(ss->busclk); -+ if (cr >= cr_ahb) -+ dev_dbg(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n", -+ cr, cr / 1000000, cr_ahb); -+ else -+ dev_warn(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n", -+ cr, cr / 1000000, cr_ahb); -+ -+ cr = clk_get_rate(ss->ssclk); -+ if (cr <= cr_mod) -+ if (cr < cr_mod) -+ dev_info(&pdev->dev, "Clock ss %lu (%lu MHz) (must be <= %lu)\n", -+ cr, cr / 1000000, cr_mod); -+ else -+ dev_dbg(&pdev->dev, "Clock ss %lu (%lu MHz) (must be <= %lu)\n", -+ cr, cr / 1000000, cr_mod); -+ else -+ dev_warn(&pdev->dev, "Clock ss is at %lu (%lu MHz) (must be <= %lu)\n", -+ cr, cr / 1000000, cr_mod); -+ -+ /* -+ * Datasheet named it "Die Bonding ID" -+ * I expect to be a sort of Security System Revision number. -+ * Since the A80 seems to have an other version of SS -+ * this info could be useful -+ */ -+ writel(SS_ENABLED, ss->base + SS_CTL); -+ v = readl(ss->base + SS_CTL); -+ v >>= 16; -+ v &= 0x07; -+ dev_info(&pdev->dev, "Die ID %d\n", v); -+ writel(0, ss->base + SS_CTL); -+ -+ ss->dev = &pdev->dev; -+ -+ mutex_init(&ss->lock); -+ mutex_init(&ss->bufin_lock); -+ mutex_init(&ss->bufout_lock); -+ -+ err = crypto_register_ahash(&sunxi_md5_alg); -+ if (err) -+ goto error_md5; -+ err = crypto_register_ahash(&sunxi_sha1_alg); -+ if (err) -+ goto error_sha1; -+ err = crypto_register_algs(sunxi_cipher_algs, -+ ARRAY_SIZE(sunxi_cipher_algs)); -+ if (err) -+ goto error_ciphers; -+ -+ return 0; -+error_ciphers: -+ crypto_unregister_ahash(&sunxi_sha1_alg); -+error_sha1: -+ crypto_unregister_ahash(&sunxi_md5_alg); -+error_md5: -+ clk_disable_unprepare(ss->ssclk); -+ clk_disable_unprepare(ss->busclk); -+ return err; -+} -+ -+static int __exit sunxi_ss_remove(struct platform_device *pdev) -+{ -+ if (!pdev->dev.of_node) -+ return 0; -+ -+ crypto_unregister_ahash(&sunxi_md5_alg); -+ crypto_unregister_ahash(&sunxi_sha1_alg); -+ crypto_unregister_algs(sunxi_cipher_algs, -+ ARRAY_SIZE(sunxi_cipher_algs)); -+ -+ if (ss->buf_in != NULL) -+ kfree(ss->buf_in); -+ if (ss->buf_out != NULL) -+ kfree(ss->buf_out); -+ -+ writel(0, ss->base + SS_CTL); -+ clk_disable_unprepare(ss->busclk); -+ clk_disable_unprepare(ss->ssclk); -+ return 0; -+} -+ -+static const struct of_device_id a20ss_crypto_of_match_table[] = { -+ { .compatible = "allwinner,sun7i-a20-crypto" }, -+ {} -+}; -+MODULE_DEVICE_TABLE(of, a20ss_crypto_of_match_table); -+ -+static struct platform_driver sunxi_ss_driver = { -+ .probe = sunxi_ss_probe, -+ .remove = __exit_p(sunxi_ss_remove), -+ .driver = { -+ .owner = THIS_MODULE, -+ .name = "sunxi-ss", -+ .of_match_table = a20ss_crypto_of_match_table, -+ }, -+}; -+ -+module_platform_driver(sunxi_ss_driver); -+ -+MODULE_DESCRIPTION("Allwinner Security System cryptographic accelerator"); -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Corentin LABBE <clabbe.montjoie@gmail.com>"); ---- /dev/null -+++ b/drivers/crypto/sunxi-ss/sunxi-ss-hash.c -@@ -0,0 +1,445 @@ -+/* -+ * sunxi-ss-hash.c - hardware cryptographic accelerator for Allwinner A20 SoC -+ * -+ * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@gmail.com> -+ * -+ * This file add support for MD5 and SHA1. -+ * -+ * You could find the datasheet in Documentation/arm/sunxi/README -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+#include "sunxi-ss.h" -+ -+/* This is a totaly arbitrary value */ -+#define SS_TIMEOUT 100 -+ -+extern struct sunxi_ss_ctx *ss; -+ -+int sunxi_hash_crainit(struct crypto_tfm *tfm) -+{ -+ crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm), -+ sizeof(struct sunxi_req_ctx)); -+ return 0; -+} -+ -+/* sunxi_hash_init: initialize request context */ -+int sunxi_hash_init(struct ahash_request *areq) -+{ -+ const char *hash_type; -+ struct sunxi_req_ctx *op = ahash_request_ctx(areq); -+ -+ memset(op, 0, sizeof(struct sunxi_req_ctx)); -+ -+ hash_type = crypto_tfm_alg_name(areq->base.tfm); -+ -+ if (strcmp(hash_type, "sha1") == 0) -+ op->mode = SS_OP_SHA1; -+ if (strcmp(hash_type, "md5") == 0) -+ op->mode = SS_OP_MD5; -+ if (op->mode == 0) -+ return -EINVAL; -+ -+ return 0; -+} -+ -+static u32 rx_cnt; -+ -+inline void ss_writer(const u32 v) -+{ -+ u32 spaces; -+ -+ writel(v, ss->base + SS_RXFIFO); -+ rx_cnt--; -+ while (rx_cnt == 0) { -+ spaces = readl_relaxed(ss->base + SS_FCSR); -+ rx_cnt = SS_RXFIFO_SPACES(spaces); -+ } -+} -+ -+inline void ss_writer_relaxed(const u32 v) -+{ -+ u32 spaces; -+ -+ writel_relaxed(v, ss->base + SS_RXFIFO); -+ rx_cnt--; -+ while (rx_cnt == 0) { -+ spaces = readl_relaxed(ss->base + SS_FCSR); -+ rx_cnt = SS_RXFIFO_SPACES(spaces); -+ } -+} -+ -+/* -+ * sunxi_hash_update: update hash engine -+ * -+ * Could be used for both SHA1 and MD5 -+ * Write data by step of 32bits and put then in the SS. -+ * -+ * Since we cannot leave partial data and hash state in the engine, -+ * we need to get the hash state at the end of this function. -+ * After some work, I have found that we can get the hash state every 64o -+ * -+ * So the first work is to get the number of bytes to write to SS modulo 64 -+ * The extra bytes will go to two different destination: -+ * op->wait for full 32bits word -+ * op->wb (waiting bytes) for partial 32 bits word -+ * So we can have up to (64/4)-1 op->wait words and 0/1/2/3 bytes in wb -+ * -+ * So at the begin of update() -+ * if op->nwait * 4 + areq->nbytes < 64 -+ * => all data writed to wait buffers and end=0 -+ * if not write all nwait to the device and position end to complete to 64o -+ * -+ * example 1: -+ * update1 60o => nwait=15 -+ * update2 60o => need one more word to have 64o -+ * end=4 -+ * so write all data in op->wait and one word of SGs -+ * write remaining data in op->wait -+ * final state op->nwait=14 -+ */ -+int sunxi_hash_update(struct ahash_request *areq) -+{ -+ u32 v, ivmode = 0; -+ unsigned int i = 0; -+ /* -+ * i is the total bytes read from SGs, to be compared to areq->nbytes -+ * i is important because we cannot rely on SG length since the sum of -+ * SG->length could be greater than areq->nbytes -+ */ -+ -+ struct sunxi_req_ctx *op = ahash_request_ctx(areq); -+ struct scatterlist *in_sg; -+ unsigned int in_i = 0; /* advancement in the current SG */ -+ u64 end; -+ /* -+ * end is the position when we need to stop writing to the device, -+ * to be compared to i -+ */ -+ int in_r; -+ void *src_addr; -+ -+ dev_dbg(ss->dev, "%s %s bc=%llu len=%u mode=%x bw=%u ww=%u", -+ __func__, crypto_tfm_alg_name(areq->base.tfm), -+ op->byte_count, areq->nbytes, op->mode, -+ op->nbw, op->nwait); -+ -+ if (areq->nbytes == 0) -+ return 0; -+ -+ end = ((areq->nbytes + op->nwait * 4 + op->nbw) / 64) * 64 -+ - op->nbw - op->nwait * 4; -+ -+ if (end > areq->nbytes || areq->nbytes - end > 63) { -+ dev_err(ss->dev, "ERROR: Bound error %llu %u\n", -+ end, areq->nbytes); -+ return -EINVAL; -+ } -+ -+ if (op->nwait > 0 && end > 0) { -+ /* a precedent update was done */ -+ for (i = 0; i < op->nwait; i++) { -+ ss_writer(op->wait[i]); -+ op->byte_count += 4; -+ } -+ op->nwait = 0; -+ } -+ -+ mutex_lock(&ss->lock); -+ /* -+ * if some data have been processed before, -+ * we need to restore the partial hash state -+ */ -+ if (op->byte_count > 0) { -+ ivmode = SS_IV_ARBITRARY; -+ for (i = 0; i < 5; i++) -+ writel(op->hash[i], ss->base + SS_IV0 + i * 4); -+ } -+ /* Enable the device */ -+ writel(op->mode | SS_ENABLED | ivmode, ss->base + SS_CTL); -+ -+ rx_cnt = 0; -+ i = 0; -+ -+ in_sg = areq->src; -+ src_addr = kmap(sg_page(in_sg)) + in_sg->offset; -+ if (src_addr == NULL) { -+ mutex_unlock(&ss->lock); -+ dev_err(ss->dev, "ERROR: Cannot kmap source buffer\n"); -+ return -EFAULT; -+ } -+ do { -+ /* -+ * step 1, if some bytes remains from last SG, -+ * try to complete them to 4 and send that word -+ */ -+ if (op->nbw > 0) { -+ while (op->nbw < 4 && i < areq->nbytes && -+ in_i < in_sg->length) { -+ op->wb |= (*(u8 *)(src_addr + in_i)) -+ << (8 * op->nbw); -+ dev_dbg(ss->dev, "%s Complete w=%d wb=%x\n", -+ __func__, op->nbw, op->wb); -+ i++; -+ in_i++; -+ op->nbw++; -+ } -+ if (op->nbw == 4) { -+ if (i <= end) { -+ ss_writer(op->wb); -+ op->byte_count += 4; -+ } else { -+ op->wait[op->nwait] = op->wb; -+ op->nwait++; -+ dev_dbg(ss->dev, "%s Keep %u bytes after %llu\n", -+ __func__, op->nwait, end); -+ } -+ op->nbw = 0; -+ op->wb = 0; -+ } -+ } -+ /* step 2, main loop, read data 4bytes at a time */ -+ while (i < areq->nbytes && in_i < in_sg->length) { -+ /* how many bytes we can read, (we need 4) */ -+ in_r = min(in_sg->length - in_i, areq->nbytes - i); -+ if (in_r < 4) { -+ /* Not enough data to write to the device */ -+ op->wb = 0; -+ while (in_r > 0) { -+ op->wb |= (*(u8 *)(src_addr + in_i)) -+ << (8 * op->nbw); -+ dev_dbg(ss->dev, "%s ending bw=%d wb=%x\n", -+ __func__, op->nbw, op->wb); -+ in_r--; -+ i++; -+ in_i++; -+ op->nbw++; -+ } -+ goto nextsg; -+ } -+ v = *(u32 *)(src_addr + in_i); -+ if (i < end) { -+ /* last write must be done without relaxed */ -+ if (i + 4 >= end) -+ ss_writer(v); -+ else -+ ss_writer_relaxed(v); -+ i += 4; -+ op->byte_count += 4; -+ in_i += 4; -+ } else { -+ op->wait[op->nwait] = v; -+ i += 4; -+ in_i += 4; -+ op->nwait++; -+ dev_dbg(ss->dev, "%s Keep word ww=%u after %llu\n", -+ __func__, op->nwait, end); -+ if (op->nwait > 15) { -+ dev_err(ss->dev, "FATAL: Cannot enqueue more, bug?\n"); -+ writel(0, ss->base + SS_CTL); -+ mutex_unlock(&ss->lock); -+ return -EIO; -+ } -+ } -+ } -+nextsg: -+ /* Nothing more to read in this SG */ -+ if (in_i == in_sg->length) { -+ kunmap(sg_page(in_sg)); -+ do { -+ in_sg = sg_next(in_sg); -+ } while (in_sg != NULL && in_sg->length == 0); -+ in_i = 0; -+ if (in_sg != NULL) { -+ src_addr = kmap(sg_page(in_sg)) + in_sg->offset; -+ if (src_addr == NULL) { -+ mutex_unlock(&ss->lock); -+ dev_err(ss->dev, "ERROR: Cannot kmap source buffer\n"); -+ return -EFAULT; -+ } -+ } -+ } -+ } while (in_sg != NULL && i < areq->nbytes); -+ -+ /* ask the device to finish the hashing */ -+ writel(op->mode | SS_ENABLED | SS_DATA_END, ss->base + SS_CTL); -+ i = 0; -+ do { -+ v = readl(ss->base + SS_CTL); -+ i++; -+ } while (i < SS_TIMEOUT && (v & SS_DATA_END) > 0); -+ if (i >= SS_TIMEOUT) { -+ dev_err(ss->dev, "ERROR: %s hash end timeout after %d loop, CTL=%x\n", -+ __func__, i, v); -+ writel(0, ss->base + SS_CTL); -+ mutex_unlock(&ss->lock); -+ return -EIO; -+ } -+ -+ /* get the partial hash */ -+ if (op->mode == SS_OP_SHA1) { -+ for (i = 0; i < 5; i++) -+ op->hash[i] = readl(ss->base + SS_MD0 + i * 4); -+ } else { -+ for (i = 0; i < 4; i++) -+ op->hash[i] = readl(ss->base + SS_MD0 + i * 4); -+ } -+ -+ writel(0, ss->base + SS_CTL); -+ mutex_unlock(&ss->lock); -+ return 0; -+} -+ -+/* -+ * sunxi_hash_final: finalize hashing operation -+ * -+ * If we have some remaining bytes, we write them. -+ * Then ask the SS for finalizing the hashing operation -+ */ -+int sunxi_hash_final(struct ahash_request *areq) -+{ -+ u32 v, ivmode = 0; -+ unsigned int i; -+ int zeros; -+ unsigned int index, padlen; -+ __be64 bits; -+ struct sunxi_req_ctx *op = ahash_request_ctx(areq); -+ -+ dev_dbg(ss->dev, "%s byte=%llu len=%u mode=%x bw=%u %x h=%x ww=%u", -+ __func__, op->byte_count, areq->nbytes, op->mode, -+ op->nbw, op->wb, op->hash[0], op->nwait); -+ -+ mutex_lock(&ss->lock); -+ rx_cnt = 0; -+ -+ /* -+ * if we have already writed something, -+ * restore the partial hash state -+ */ -+ if (op->byte_count > 0) { -+ ivmode = SS_IV_ARBITRARY; -+ for (i = 0; i < 5; i++) -+ writel(op->hash[i], ss->base + SS_IV0 + i * 4); -+ } -+ writel(op->mode | SS_ENABLED | ivmode, ss->base + SS_CTL); -+ -+ /* write the remaining words of the wait buffer */ -+ if (op->nwait > 0) { -+ for (i = 0; i < op->nwait; i++) { -+ v = op->wait[i]; -+ ss_writer(v); -+ op->byte_count += 4; -+ dev_dbg(ss->dev, "%s write %llu i=%u %x\n", -+ __func__, op->byte_count, i, v); -+ } -+ op->nwait = 0; -+ } -+ -+ /* write the remaining bytes of the nbw buffer */ -+ if (op->nbw > 0) { -+ op->wb |= ((1 << 7) << (op->nbw * 8)); -+ ss_writer(op->wb); -+ } else { -+ ss_writer((1 << 7)); -+ } -+ -+ /* -+ * number of space to pad to obtain 64o minus 8(size) minus 4 (final 1) -+ * I take the operations from other md5/sha1 implementations -+ */ -+ -+ /* we have already send 4 more byte of which nbw data */ -+ if (op->mode == SS_OP_MD5) { -+ index = (op->byte_count + 4) & 0x3f; -+ op->byte_count += op->nbw; -+ if (index > 56) -+ zeros = (120 - index) / 4; -+ else -+ zeros = (56 - index) / 4; -+ } else { -+ op->byte_count += op->nbw; -+ index = op->byte_count & 0x3f; -+ padlen = (index < 56) ? (56 - index) : ((64+56) - index); -+ zeros = (padlen - 1) / 4; -+ } -+ for (i = 0; i < zeros; i++) -+ ss_writer(0); -+ -+ /* write the length of data */ -+ if (op->mode == SS_OP_SHA1) { -+ bits = cpu_to_be64(op->byte_count << 3); -+ ss_writer(bits & 0xffffffff); -+ ss_writer((bits >> 32) & 0xffffffff); -+ } else { -+ ss_writer((op->byte_count << 3) & 0xffffffff); -+ ss_writer((op->byte_count >> 29) & 0xffffffff); -+ } -+ -+ /* Tell the SS to stop the hashing */ -+ writel(op->mode | SS_ENABLED | SS_DATA_END, ss->base + SS_CTL); -+ -+ /* -+ * Wait for SS to finish the hash. -+ * The timeout could happend only in case of bad overcloking -+ * or driver bug. -+ */ -+ i = 0; -+ do { -+ v = readl(ss->base + SS_CTL); -+ i++; -+ } while (i < SS_TIMEOUT && (v & SS_DATA_END) > 0); -+ if (i >= SS_TIMEOUT) { -+ dev_err(ss->dev, "ERROR: hash end timeout %d>%d ctl=%x len=%u\n", -+ i, SS_TIMEOUT, v, areq->nbytes); -+ writel(0, ss->base + SS_CTL); -+ mutex_unlock(&ss->lock); -+ return -EIO; -+ } -+ -+ /* Get the hash from the device */ -+ if (op->mode == SS_OP_SHA1) { -+ for (i = 0; i < 5; i++) { -+ v = cpu_to_be32(readl(ss->base + SS_MD0 + i * 4)); -+ memcpy(areq->result + i * 4, &v, 4); -+ } -+ } else { -+ for (i = 0; i < 4; i++) { -+ v = readl(ss->base + SS_MD0 + i * 4); -+ memcpy(areq->result + i * 4, &v, 4); -+ } -+ } -+ writel(0, ss->base + SS_CTL); -+ mutex_unlock(&ss->lock); -+ return 0; -+} -+ -+/* sunxi_hash_finup: finalize hashing operation after an update */ -+int sunxi_hash_finup(struct ahash_request *areq) -+{ -+ int err; -+ -+ err = sunxi_hash_update(areq); -+ if (err != 0) -+ return err; -+ -+ return sunxi_hash_final(areq); -+} -+ -+/* combo of init/update/final functions */ -+int sunxi_hash_digest(struct ahash_request *areq) -+{ -+ int err; -+ -+ err = sunxi_hash_init(areq); -+ if (err != 0) -+ return err; -+ -+ err = sunxi_hash_update(areq); -+ if (err != 0) -+ return err; -+ -+ return sunxi_hash_final(areq); -+} ---- /dev/null -+++ b/drivers/crypto/sunxi-ss/sunxi-ss.h -@@ -0,0 +1,193 @@ -+/* -+ * sunxi-ss.c - hardware cryptographic accelerator for Allwinner A20 SoC -+ * -+ * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@gmail.com> -+ * -+ * Support AES cipher with 128,192,256 bits keysize. -+ * Support MD5 and SHA1 hash algorithms. -+ * Support DES and 3DES -+ * -+ * You could find the datasheet in Documentation/arm/sunxi/README -+ * -+ * Licensed under the GPL-2. -+ */ -+ -+#include <linux/clk.h> -+#include <linux/crypto.h> -+#include <linux/io.h> -+#include <linux/module.h> -+#include <linux/of.h> -+#include <linux/platform_device.h> -+#include <crypto/scatterwalk.h> -+#include <linux/scatterlist.h> -+#include <linux/interrupt.h> -+#include <linux/delay.h> -+#include <crypto/md5.h> -+#include <crypto/sha.h> -+#include <crypto/hash.h> -+#include <crypto/internal/hash.h> -+#include <crypto/aes.h> -+#include <crypto/des.h> -+#include <crypto/internal/rng.h> -+ -+#define SS_CTL 0x00 -+#define SS_KEY0 0x04 -+#define SS_KEY1 0x08 -+#define SS_KEY2 0x0C -+#define SS_KEY3 0x10 -+#define SS_KEY4 0x14 -+#define SS_KEY5 0x18 -+#define SS_KEY6 0x1C -+#define SS_KEY7 0x20 -+ -+#define SS_IV0 0x24 -+#define SS_IV1 0x28 -+#define SS_IV2 0x2C -+#define SS_IV3 0x30 -+ -+#define SS_CNT0 0x34 -+#define SS_CNT1 0x38 -+#define SS_CNT2 0x3C -+#define SS_CNT3 0x40 -+ -+#define SS_FCSR 0x44 -+#define SS_ICSR 0x48 -+ -+#define SS_MD0 0x4C -+#define SS_MD1 0x50 -+#define SS_MD2 0x54 -+#define SS_MD3 0x58 -+#define SS_MD4 0x5C -+ -+#define SS_RXFIFO 0x200 -+#define SS_TXFIFO 0x204 -+ -+/* SS_CTL configuration values */ -+ -+/* PRNG generator mode - bit 15 */ -+#define SS_PRNG_ONESHOT (0 << 15) -+#define SS_PRNG_CONTINUE (1 << 15) -+ -+/* IV mode for hash */ -+#define SS_IV_ARBITRARY (1 << 14) -+ -+/* SS operation mode - bits 12-13 */ -+#define SS_ECB (0 << 12) -+#define SS_CBC (1 << 12) -+#define SS_CNT (2 << 12) -+ -+/* Counter width for CNT mode - bits 10-11 */ -+#define SS_CNT_16BITS (0 << 10) -+#define SS_CNT_32BITS (1 << 10) -+#define SS_CNT_64BITS (2 << 10) -+ -+/* Key size for AES - bits 8-9 */ -+#define SS_AES_128BITS (0 << 8) -+#define SS_AES_192BITS (1 << 8) -+#define SS_AES_256BITS (2 << 8) -+ -+/* Operation direction - bit 7 */ -+#define SS_ENCRYPTION (0 << 7) -+#define SS_DECRYPTION (1 << 7) -+ -+/* SS Method - bits 4-6 */ -+#define SS_OP_AES (0 << 4) -+#define SS_OP_DES (1 << 4) -+#define SS_OP_3DES (2 << 4) -+#define SS_OP_SHA1 (3 << 4) -+#define SS_OP_MD5 (4 << 4) -+#define SS_OP_PRNG (5 << 4) -+ -+/* Data end bit - bit 2 */ -+#define SS_DATA_END (1 << 2) -+ -+/* PRNG start bit - bit 1 */ -+#define SS_PRNG_START (1 << 1) -+ -+/* SS Enable bit - bit 0 */ -+#define SS_DISABLED (0 << 0) -+#define SS_ENABLED (1 << 0) -+ -+/* SS_FCSR configuration values */ -+/* RX FIFO status - bit 30 */ -+#define SS_RXFIFO_FREE (1 << 30) -+ -+/* RX FIFO empty spaces - bits 24-29 */ -+#define SS_RXFIFO_SPACES(val) (((val) >> 24) & 0x3f) -+ -+/* TX FIFO status - bit 22 */ -+#define SS_TXFIFO_AVAILABLE (1 << 22) -+ -+/* TX FIFO available spaces - bits 16-21 */ -+#define SS_TXFIFO_SPACES(val) (((val) >> 16) & 0x3f) -+ -+#define SS_RXFIFO_EMP_INT_PENDING (1 << 10) -+#define SS_TXFIFO_AVA_INT_PENDING (1 << 8) -+#define SS_RXFIFO_EMP_INT_ENABLE (1 << 2) -+#define SS_TXFIFO_AVA_INT_ENABLE (1 << 0) -+ -+/* SS_ICSR configuration values */ -+#define SS_ICS_DRQ_ENABLE (1 << 4) -+ -+struct sunxi_ss_ctx { -+ void __iomem *base; -+ int irq; -+ struct clk *busclk; -+ struct clk *ssclk; -+ struct device *dev; -+ struct resource *res; -+ void *buf_in; /* pointer to data to be uploaded to the device */ -+ size_t buf_in_size; /* size of buf_in */ -+ void *buf_out; -+ size_t buf_out_size; -+ struct mutex lock; /* control the use of the device */ -+ struct mutex bufout_lock; /* control the use of buf_out*/ -+ struct mutex bufin_lock; /* control the sue of buf_in*/ -+}; -+ -+struct sunxi_tfm_ctx { -+ u32 key[AES_MAX_KEY_SIZE / 4];/* divided by sizeof(u32) */ -+ u32 keylen; -+ u32 keymode; -+}; -+ -+struct sunxi_req_ctx { -+ u32 mode; -+ u64 byte_count; /* number of bytes "uploaded" to the device */ -+ u32 wb; /* a partial word waiting to be completed and -+ uploaded to the device */ -+ /* number of bytes to be uploaded in the wb word */ -+ unsigned int nbw; -+ u32 hash[5]; -+ u32 wait[64]; -+ unsigned int nwait; -+}; -+ -+#define SS_SEED_LEN (192/8) -+#define SS_DATA_LEN (160/8) -+ -+struct prng_context { -+ u32 seed[SS_SEED_LEN/4]; -+ unsigned int slen; -+}; -+ -+int sunxi_hash_crainit(struct crypto_tfm *tfm); -+int sunxi_hash_init(struct ahash_request *areq); -+int sunxi_hash_update(struct ahash_request *areq); -+int sunxi_hash_final(struct ahash_request *areq); -+int sunxi_hash_finup(struct ahash_request *areq); -+int sunxi_hash_digest(struct ahash_request *areq); -+int sunxi_hash_export(struct ahash_request *areq, void *out); -+int sunxi_hash_import(struct ahash_request *areq, const void *in); -+ -+int sunxi_ss_aes_poll(struct ablkcipher_request *areq, u32 mode); -+int sunxi_ss_des_poll(struct ablkcipher_request *areq, u32 mode); -+int sunxi_ss_cipher_init(struct crypto_tfm *tfm); -+int sunxi_ss_cipher_encrypt(struct ablkcipher_request *areq); -+int sunxi_ss_cipher_decrypt(struct ablkcipher_request *areq); -+int sunxi_ss_aes_setkey(struct crypto_ablkcipher *tfm, const u8 *key, -+ unsigned int keylen); -+int sunxi_ss_des_setkey(struct crypto_ablkcipher *tfm, const u8 *key, -+ unsigned int keylen); -+int sunxi_ss_des3_setkey(struct crypto_ablkcipher *tfm, const u8 *key, -+ unsigned int keylen); diff --git a/target/linux/sunxi/patches-3.18/300-dt-sun7i-add-bananapi.patch b/target/linux/sunxi/patches-3.18/300-dt-sun7i-add-bananapi.patch deleted file mode 100644 index c60b1fe..0000000 --- a/target/linux/sunxi/patches-3.18/300-dt-sun7i-add-bananapi.patch +++ /dev/null @@ -1,245 +0,0 @@ -From 29b4146ec174f0f598d6b454caa335e8f57e392b Mon Sep 17 00:00:00 2001 -From: Hans de Goede <hdegoede@redhat.com> -Date: Mon, 28 Jul 2014 23:05:14 +0200 -Subject: [PATCH] ARM: dts: sun7i: Add Banana Pi board - -The Banana Pi is an A20 based development board using Raspberry Pi compatible -IO headers. It comes with 1 GB RAM, 1 Gb ethernet, 2x USB host, sata, hdmi -and stereo audio out + various expenansion headers: - -http://www.lemaker.org/ - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/sun7i-a20-bananapi.dts | 214 +++++++++++++++++++++++++++++++ - 2 files changed, 215 insertions(+) - create mode 100644 arch/arm/boot/dts/sun7i-a20-bananapi.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -435,6 +435,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ - sun6i-a31-hummingbird.dtb \ - sun6i-a31-m9.dtb - dtb-$(CONFIG_MACH_SUN7I) += \ -+ sun7i-a20-bananapi.dtb \ - sun7i-a20-cubieboard2.dtb \ - sun7i-a20-cubietruck.dtb \ - sun7i-a20-hummingbird.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts -@@ -0,0 +1,214 @@ -+/* -+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com> -+ * -+ * Hans de Goede <hdegoede@redhat.com> -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This library is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This library is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public -+ * License along with this library; if not, write to the Free -+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -+ * MA 02110-1301 USA -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+/include/ "sun7i-a20.dtsi" -+/include/ "sunxi-common-regulators.dtsi" -+ -+/ { -+ model = "LeMaker Banana Pi"; -+ compatible = "lemaker,bananapi", "allwinner,sun7i-a20"; -+ -+ soc@01c00000 { -+ spi0: spi@01c05000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins_a>; -+ status = "okay"; -+ }; -+ -+ mmc0: mmc@01c0f000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; -+ vmmc-supply = <®_vcc3v3>; -+ bus-width = <4>; -+ cd-gpios = <&pio 7 10 0>; /* PH10 */ -+ cd-inverted; -+ status = "okay"; -+ }; -+ -+ usbphy: phy@01c13400 { -+ usb1_vbus-supply = <®_usb1_vbus>; -+ usb2_vbus-supply = <®_usb2_vbus>; -+ status = "okay"; -+ }; -+ -+ ehci0: usb@01c14000 { -+ status = "okay"; -+ }; -+ -+ ohci0: usb@01c14400 { -+ status = "okay"; -+ }; -+ -+ ahci: sata@01c18000 { -+ status = "okay"; -+ }; -+ -+ ehci1: usb@01c1c000 { -+ status = "okay"; -+ }; -+ -+ ohci1: usb@01c1c400 { -+ status = "okay"; -+ }; -+ -+ pinctrl@01c20800 { -+ mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { -+ allwinner,pins = "PH10"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = <0>; -+ allwinner,pull = <1>; -+ }; -+ -+ gmac_power_pin_bananapi: gmac_power_pin@0 { -+ allwinner,pins = "PH23"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ led_pins_bananapi: led_pins@0 { -+ allwinner,pins = "PH24"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ }; -+ -+ ir0: ir@01c21800 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ir0_pins_a>; -+ status = "okay"; -+ }; -+ -+ uart0: serial@01c28000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins_a>; -+ status = "okay"; -+ }; -+ -+ uart3: serial@01c28c00 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart3_pins_b>; -+ status = "okay"; -+ }; -+ -+ uart7: serial@01c29c00 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart7_pins_a>; -+ status = "okay"; -+ }; -+ -+ i2c0: i2c@01c2ac00 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins_a>; -+ status = "okay"; -+ -+ axp209: pmic@34 { -+ compatible = "x-powers,axp209"; -+ reg = <0x34>; -+ interrupt-parent = <&nmi_intc>; -+ interrupts = <0 8>; -+ -+ interrupt-controller; -+ #interrupt-cells = <1>; -+ }; -+ }; -+ -+ i2c2: i2c@01c2b400 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c2_pins_a>; -+ status = "okay"; -+ }; -+ -+ gmac: ethernet@01c50000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gmac_pins_rgmii_a>; -+ phy = <&phy1>; -+ phy-mode = "rgmii"; -+ phy-supply = <®_gmac_3v3>; -+ status = "okay"; -+ -+ phy1: ethernet-phy@1 { -+ reg = <1>; -+ }; -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&led_pins_bananapi>; -+ -+ green { -+ label = "bananapi:green:usr"; -+ gpios = <&pio 7 24 0>; -+ }; -+ }; -+ -+ reg_usb1_vbus: usb1-vbus { -+ status = "okay"; -+ }; -+ -+ reg_usb2_vbus: usb2-vbus { -+ status = "okay"; -+ }; -+ -+ reg_gmac_3v3: gmac-3v3 { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gmac_power_pin_bananapi>; -+ regulator-name = "gmac-3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ startup-delay-us = <50000>; -+ enable-active-high; -+ gpio = <&pio 7 23 0>; -+ }; -+}; diff --git a/target/linux/sunxi/patches-3.18/301-dt-sun7i-add-bananapro.patch b/target/linux/sunxi/patches-3.18/301-dt-sun7i-add-bananapro.patch deleted file mode 100644 index c8cdb1d..0000000 --- a/target/linux/sunxi/patches-3.18/301-dt-sun7i-add-bananapro.patch +++ /dev/null @@ -1,291 +0,0 @@ -From 3613d535a77270eaf15a5f988a48434c7d1530f2 Mon Sep 17 00:00:00 2001 -From: Hans de Goede <hdegoede@redhat.com> -Date: Wed, 7 Jan 2015 20:44:52 +0100 -Subject: [PATCH] ARM: dts: sun7i: Add dts file for Bananapro board - -Add support for the new Bananapro A20 development board from lemaker.org. -This board features 1G RAM, 2 USB A receptacles, 1 micro USB receptacle for -OTG, 1 micro USB receptacle for power, HDMI, sata, Gbit ethernet, ir receiver, -3.5 mm jack for a/v out, on board microphone, 40 gpio pins and sdio wifi. - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/sun7i-a20-bananapro.dts | 261 ++++++++++++++++++++++++++++++ - 2 files changed, 262 insertions(+) - create mode 100644 arch/arm/boot/dts/sun7i-a20-bananapro.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -436,6 +436,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ - sun6i-a31-m9.dtb - dtb-$(CONFIG_MACH_SUN7I) += \ - sun7i-a20-bananapi.dtb \ -+ sun7i-a20-bananapro.dtb \ - sun7i-a20-cubieboard2.dtb \ - sun7i-a20-cubietruck.dtb \ - sun7i-a20-hummingbird.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts -@@ -0,0 +1,261 @@ -+/* -+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com> -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This file is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public -+ * License along with this file; if not, write to the Free -+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -+ * MA 02110-1301 USA -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+/include/ "sun7i-a20.dtsi" -+/include/ "sunxi-common-regulators.dtsi" -+ -+/ { -+ model = "LeMaker Banana Pro"; -+ compatible = "lemaker,bananapro", "allwinner,sun7i-a20"; -+ -+ soc@01c00000 { -+ spi0: spi@01c05000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins_a>; -+ status = "okay"; -+ }; -+ -+ mmc0: mmc@01c0f000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; -+ vmmc-supply = <®_vcc3v3>; -+ bus-width = <4>; -+ cd-gpios = <&pio 7 10 0>; /* PH10 */ -+ cd-inverted; -+ status = "okay"; -+ }; -+ -+ mmc3: mmc@01c12000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc3_pins_a>; -+ vmmc-supply = <®_vmmc3>; -+ bus-width = <4>; -+ non-removable; -+ status = "okay"; -+ }; -+ -+ usbphy: phy@01c13400 { -+ usb1_vbus-supply = <®_usb1_vbus>; -+ usb2_vbus-supply = <®_usb2_vbus>; -+ status = "okay"; -+ }; -+ -+ ehci0: usb@01c14000 { -+ status = "okay"; -+ }; -+ -+ ohci0: usb@01c14400 { -+ status = "okay"; -+ }; -+ -+ ahci: sata@01c18000 { -+ status = "okay"; -+ }; -+ -+ ehci1: usb@01c1c000 { -+ status = "okay"; -+ }; -+ -+ ohci1: usb@01c1c400 { -+ status = "okay"; -+ }; -+ -+ pinctrl@01c20800 { -+ usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { -+ allwinner,pins = "PH0"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { -+ allwinner,pins = "PH1"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { -+ allwinner,pins = "PH10"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = <0>; -+ allwinner,pull = <1>; -+ }; -+ -+ vmmc3_pin_bananapro: vmmc3_pin@0 { -+ allwinner,pins = "PH22"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ gmac_power_pin_bananapi: gmac_power_pin@0 { -+ allwinner,pins = "PH23"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ led_pins_bananapi: led_pins@0 { -+ allwinner,pins = "PH24", "PG2"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ }; -+ -+ ir0: ir@01c21800 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ir0_pins_a>; -+ status = "okay"; -+ }; -+ -+ uart0: serial@01c28000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins_a>; -+ status = "okay"; -+ }; -+ -+ uart2: serial@01c28800 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart2_pins_a>; -+ status = "okay"; -+ }; -+ -+ uart7: serial@01c29c00 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart7_pins_a>; -+ status = "okay"; -+ }; -+ -+ i2c0: i2c@01c2ac00 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins_a>; -+ status = "okay"; -+ -+ axp209: pmic@34 { -+ compatible = "x-powers,axp209"; -+ reg = <0x34>; -+ interrupt-parent = <&nmi_intc>; -+ interrupts = <0 8>; -+ -+ interrupt-controller; -+ #interrupt-cells = <1>; -+ }; -+ }; -+ -+ i2c2: i2c@01c2b400 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c2_pins_a>; -+ status = "okay"; -+ }; -+ -+ gmac: ethernet@01c50000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gmac_pins_rgmii_a>; -+ phy = <&phy1>; -+ phy-mode = "rgmii"; -+ phy-supply = <®_gmac_3v3>; -+ status = "okay"; -+ -+ phy1: ethernet-phy@1 { -+ reg = <1>; -+ }; -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&led_pins_bananapi>; -+ -+ green { -+ label = "bananapi:green:usr"; -+ gpios = <&pio 7 24 0>; -+ }; -+ blue { -+ label = "bananapi:blue:usr"; -+ gpios = <&pio 6 2 0>; -+ }; -+ }; -+ -+ reg_usb1_vbus: usb1-vbus { -+ pinctrl-0 = <&usb1_vbus_pin_bananapro>; -+ gpio = <&pio 7 0 0>; /* PH0 */ -+ status = "okay"; -+ }; -+ -+ reg_usb2_vbus: usb2-vbus { -+ pinctrl-0 = <&usb2_vbus_pin_bananapro>; -+ gpio = <&pio 7 1 0>; /* PH1 */ -+ status = "okay"; -+ }; -+ -+ reg_gmac_3v3: gmac-3v3 { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gmac_power_pin_bananapi>; -+ regulator-name = "gmac-3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ startup-delay-us = <100000>; -+ enable-active-high; -+ gpio = <&pio 7 23 0>; -+ }; -+ -+ reg_vmmc3: vmmc3 { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&vmmc3_pin_bananapro>; -+ regulator-name = "vmmc3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ enable-active-high; -+ gpio = <&pio 7 22 0>; -+ }; -+}; diff --git a/target/linux/sunxi/patches-3.18/302-dt-sun7i-add-lamobo-r1.patch b/target/linux/sunxi/patches-3.18/302-dt-sun7i-add-lamobo-r1.patch deleted file mode 100644 index 5d5ba11..0000000 --- a/target/linux/sunxi/patches-3.18/302-dt-sun7i-add-lamobo-r1.patch +++ /dev/null @@ -1,248 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -441,6 +441,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ - sun7i-a20-cubietruck.dtb \ - sun7i-a20-hummingbird.dtb \ - sun7i-a20-i12-tvbox.dtb \ -+ sun7i-a20-lamobo-r1.dtb \ - sun7i-a20-olinuxino-lime.dtb \ - sun7i-a20-olinuxino-micro.dtb \ - sun7i-a20-pcduino3.dtb ---- /dev/null -+++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts -@@ -0,0 +1,235 @@ -+/* -+ * Copyright 2015 Daniel Golle <daniel@makrotopia.org> -+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com> -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This library is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This library is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public -+ * License along with this library; if not, write to the Free -+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -+ * MA 02110-1301 USA -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+/include/ "sun7i-a20.dtsi" -+/include/ "sunxi-common-regulators.dtsi" -+#include <dt-bindings/input/input.h> -+ -+/ { -+ model = "Lamobo R1"; -+ compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20"; -+ -+ soc@01c00000 { -+ spi0: spi@01c05000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins_a>; -+ status = "okay"; -+ }; -+ -+ mmc0: mmc@01c0f000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo>; -+ vmmc-supply = <®_vcc3v3>; -+ bus-width = <4>; -+ cd-gpios = <&pio 7 10 0>; /* PH10 */ -+ cd-inverted; -+ status = "okay"; -+ }; -+ -+ usbphy: phy@01c13400 { -+ usb1_vbus-supply = <®_usb1_vbus>; -+ usb2_vbus-supply = <®_usb2_vbus>; -+ status = "okay"; -+ }; -+ -+ ehci0: usb@01c14000 { -+ status = "okay"; -+ }; -+ -+ ohci0: usb@01c14400 { -+ status = "okay"; -+ }; -+ -+ ahci: sata@01c18000 { -+ target-supply = <®_ahci_5v>; -+ status = "okay"; -+ }; -+ -+ ehci1: usb@01c1c000 { -+ status = "okay"; -+ }; -+ -+ ohci1: usb@01c1c400 { -+ status = "okay"; -+ }; -+ -+ pinctrl@01c20800 { -+ mmc0_cd_pin_lamobo: mmc0_cd_pin@0 { -+ allwinner,pins = "PH10"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = <0>; -+ allwinner,pull = <1>; -+ }; -+ -+ gmac_power_pin_lamobo: gmac_power_pin@0 { -+ allwinner,pins = "PH23"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ led_pins_lamobo: led_pins@0 { -+ allwinner,pins = "PH2"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <1>; -+ allwinner,pull = <0>; -+ }; -+ }; -+ -+ lradc: lradc@01c22800 { -+ allwinner,chan0-step = <200>; -+ linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN -+ KEY_MENU KEY_SEARCH KEY_HOME -+ KEY_ESC KEY_ENTER>; -+ status = "okay"; -+ }; -+ -+ ir0: ir@01c21800 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ir0_pins_a>; -+ status = "okay"; -+ }; -+ -+ uart0: serial@01c28000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins_a>; -+ status = "okay"; -+ }; -+ -+ uart3: serial@01c28c00 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart3_pins_b>; -+ status = "okay"; -+ }; -+ -+ uart7: serial@01c29c00 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart7_pins_a>; -+ status = "okay"; -+ }; -+ -+ i2c0: i2c@01c2ac00 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins_a>; -+ status = "okay"; -+ -+ axp209: pmic@34 { -+ compatible = "x-powers,axp209"; -+ reg = <0x34>; -+ interrupt-parent = <&nmi_intc>; -+ interrupts = <0 8>; -+ -+ interrupt-controller; -+ #interrupt-cells = <1>; -+ }; -+ }; -+ -+ i2c1: i2c@01c2b000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins_a>; -+ status = "okay"; -+ }; -+ -+ i2c2: i2c@01c2b400 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c2_pins_a>; -+ status = "okay"; -+ }; -+ -+ gmac: ethernet@01c50000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gmac_pins_rgmii_a>; -+ phy = <&phy1>; -+ phy-mode = "rgmii"; -+ phy-supply = <®_gmac_3v3>; -+ status = "okay"; -+ -+ phy1: ethernet-phy@1 { -+ reg = <1>; -+ }; -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&led_pins_lamobo>; -+ -+ green { -+ label = "lamobo:green:usr"; -+ gpios = <&pio 7 24 0>; -+ default-state = "on"; -+ }; -+ }; -+ -+ reg_ahci_5v: ahci-5v { -+ status = "okay"; -+ }; -+ -+ reg_usb1_vbus: usb1-vbus { -+ status = "okay"; -+ }; -+ -+ reg_usb2_vbus: usb2-vbus { -+ status = "okay"; -+ }; -+ -+ reg_gmac_3v3: gmac-3v3 { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gmac_power_pin_lamobo>; -+ regulator-name = "gmac-3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ startup-delay-us = <100000>; -+ enable-active-high; -+ gpio = <&pio 7 23 0>; -+ status = "okay"; -+ }; -+}; diff --git a/target/linux/sunxi/patches-4.1/100-mfd-axp20x-add-axp22x-pmic.patch b/target/linux/sunxi/patches-4.1/100-mfd-axp20x-add-axp22x-pmic.patch deleted file mode 100644 index c93adeb..0000000 --- a/target/linux/sunxi/patches-4.1/100-mfd-axp20x-add-axp22x-pmic.patch +++ /dev/null @@ -1,330 +0,0 @@ -From f05be589ff32e87821b86845625ed3d402d37dc7 Mon Sep 17 00:00:00 2001 -From: Boris BREZILLON <boris.brezillon@free-electrons.com> -Date: Fri, 10 Apr 2015 12:09:01 +0800 -Subject: [PATCH] mfd: axp20x: Add AXP22x PMIC support - -Add support for the AXP22x PMIC devices to the existing AXP20x driver. -This includes the AXP221 and AXP223, which are identical except for -the external data bus. Only AXP221 is added for now. AXP223 will be -added after it's Reduced Serial Bus (RSB) interface is supported. - -AXP22x defines a new set of registers, power supplies and regulators, -but most of the API is similar to the AXP20x ones. - -A new irq chip definition is used, even though the available interrupts -on AXP22x is a subset of those on AXP20x. This is done so the interrupt -numbers match those on the datasheet. - -This patch only enables the interrupts, system power-off function, and PEK -sub-device. The regulator driver must first support different variants -before we enable it from the mfd driver. - -Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> -[wens@csie.org: fix interrupts and move regulators to separate patch] -Signed-off-by: Chen-Yu Tsai <wens@csie.org> -Signed-off-by: Lee Jones <lee.jones@linaro.org> ---- - drivers/mfd/axp20x.c | 98 ++++++++++++++++++++++++++++++++++++++++++++++ - include/linux/mfd/axp20x.h | 86 ++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 184 insertions(+) - ---- a/drivers/mfd/axp20x.c -+++ b/drivers/mfd/axp20x.c -@@ -32,6 +32,7 @@ - static const char * const axp20x_model_names[] = { - "AXP202", - "AXP209", -+ "AXP221", - "AXP288", - }; - -@@ -54,6 +55,25 @@ static const struct regmap_access_table - .n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges), - }; - -+static const struct regmap_range axp22x_writeable_ranges[] = { -+ regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), -+ regmap_reg_range(AXP20X_DCDC_MODE, AXP22X_BATLOW_THRES1), -+}; -+ -+static const struct regmap_range axp22x_volatile_ranges[] = { -+ regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE), -+}; -+ -+static const struct regmap_access_table axp22x_writeable_table = { -+ .yes_ranges = axp22x_writeable_ranges, -+ .n_yes_ranges = ARRAY_SIZE(axp22x_writeable_ranges), -+}; -+ -+static const struct regmap_access_table axp22x_volatile_table = { -+ .yes_ranges = axp22x_volatile_ranges, -+ .n_yes_ranges = ARRAY_SIZE(axp22x_volatile_ranges), -+}; -+ - static const struct regmap_range axp288_writeable_ranges[] = { - regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ6_STATE), - regmap_reg_range(AXP20X_DCDC_MODE, AXP288_FG_TUNE5), -@@ -87,6 +107,20 @@ static struct resource axp20x_pek_resour - }, - }; - -+static struct resource axp22x_pek_resources[] = { -+ { -+ .name = "PEK_DBR", -+ .start = AXP22X_IRQ_PEK_RIS_EDGE, -+ .end = AXP22X_IRQ_PEK_RIS_EDGE, -+ .flags = IORESOURCE_IRQ, -+ }, { -+ .name = "PEK_DBF", -+ .start = AXP22X_IRQ_PEK_FAL_EDGE, -+ .end = AXP22X_IRQ_PEK_FAL_EDGE, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ - static struct resource axp288_fuel_gauge_resources[] = { - { - .start = AXP288_IRQ_QWBTU, -@@ -129,6 +163,15 @@ static const struct regmap_config axp20x - .cache_type = REGCACHE_RBTREE, - }; - -+static const struct regmap_config axp22x_regmap_config = { -+ .reg_bits = 8, -+ .val_bits = 8, -+ .wr_table = &axp22x_writeable_table, -+ .volatile_table = &axp22x_volatile_table, -+ .max_register = AXP22X_BATLOW_THRES1, -+ .cache_type = REGCACHE_RBTREE, -+}; -+ - static const struct regmap_config axp288_regmap_config = { - .reg_bits = 8, - .val_bits = 8, -@@ -181,6 +224,34 @@ static const struct regmap_irq axp20x_re - INIT_REGMAP_IRQ(AXP20X, GPIO0_INPUT, 4, 0), - }; - -+static const struct regmap_irq axp22x_regmap_irqs[] = { -+ INIT_REGMAP_IRQ(AXP22X, ACIN_OVER_V, 0, 7), -+ INIT_REGMAP_IRQ(AXP22X, ACIN_PLUGIN, 0, 6), -+ INIT_REGMAP_IRQ(AXP22X, ACIN_REMOVAL, 0, 5), -+ INIT_REGMAP_IRQ(AXP22X, VBUS_OVER_V, 0, 4), -+ INIT_REGMAP_IRQ(AXP22X, VBUS_PLUGIN, 0, 3), -+ INIT_REGMAP_IRQ(AXP22X, VBUS_REMOVAL, 0, 2), -+ INIT_REGMAP_IRQ(AXP22X, VBUS_V_LOW, 0, 1), -+ INIT_REGMAP_IRQ(AXP22X, BATT_PLUGIN, 1, 7), -+ INIT_REGMAP_IRQ(AXP22X, BATT_REMOVAL, 1, 6), -+ INIT_REGMAP_IRQ(AXP22X, BATT_ENT_ACT_MODE, 1, 5), -+ INIT_REGMAP_IRQ(AXP22X, BATT_EXIT_ACT_MODE, 1, 4), -+ INIT_REGMAP_IRQ(AXP22X, CHARG, 1, 3), -+ INIT_REGMAP_IRQ(AXP22X, CHARG_DONE, 1, 2), -+ INIT_REGMAP_IRQ(AXP22X, BATT_TEMP_HIGH, 1, 1), -+ INIT_REGMAP_IRQ(AXP22X, BATT_TEMP_LOW, 1, 0), -+ INIT_REGMAP_IRQ(AXP22X, DIE_TEMP_HIGH, 2, 7), -+ INIT_REGMAP_IRQ(AXP22X, PEK_SHORT, 2, 1), -+ INIT_REGMAP_IRQ(AXP22X, PEK_LONG, 2, 0), -+ INIT_REGMAP_IRQ(AXP22X, LOW_PWR_LVL1, 3, 1), -+ INIT_REGMAP_IRQ(AXP22X, LOW_PWR_LVL2, 3, 0), -+ INIT_REGMAP_IRQ(AXP22X, TIMER, 4, 7), -+ INIT_REGMAP_IRQ(AXP22X, PEK_RIS_EDGE, 4, 6), -+ INIT_REGMAP_IRQ(AXP22X, PEK_FAL_EDGE, 4, 5), -+ INIT_REGMAP_IRQ(AXP22X, GPIO1_INPUT, 4, 1), -+ INIT_REGMAP_IRQ(AXP22X, GPIO0_INPUT, 4, 0), -+}; -+ - /* some IRQs are compatible with axp20x models */ - static const struct regmap_irq axp288_regmap_irqs[] = { - INIT_REGMAP_IRQ(AXP288, VBUS_FALL, 0, 2), -@@ -224,6 +295,7 @@ static const struct regmap_irq axp288_re - static const struct of_device_id axp20x_of_match[] = { - { .compatible = "x-powers,axp202", .data = (void *) AXP202_ID }, - { .compatible = "x-powers,axp209", .data = (void *) AXP209_ID }, -+ { .compatible = "x-powers,axp221", .data = (void *) AXP221_ID }, - { }, - }; - MODULE_DEVICE_TABLE(of, axp20x_of_match); -@@ -258,6 +330,18 @@ static const struct regmap_irq_chip axp2 - - }; - -+static const struct regmap_irq_chip axp22x_regmap_irq_chip = { -+ .name = "axp22x_irq_chip", -+ .status_base = AXP20X_IRQ1_STATE, -+ .ack_base = AXP20X_IRQ1_STATE, -+ .mask_base = AXP20X_IRQ1_EN, -+ .mask_invert = true, -+ .init_ack_masked = true, -+ .irqs = axp22x_regmap_irqs, -+ .num_irqs = ARRAY_SIZE(axp22x_regmap_irqs), -+ .num_regs = 5, -+}; -+ - static const struct regmap_irq_chip axp288_regmap_irq_chip = { - .name = "axp288_irq_chip", - .status_base = AXP20X_IRQ1_STATE, -@@ -281,6 +365,14 @@ static struct mfd_cell axp20x_cells[] = - }, - }; - -+static struct mfd_cell axp22x_cells[] = { -+ { -+ .name = "axp20x-pek", -+ .num_resources = ARRAY_SIZE(axp22x_pek_resources), -+ .resources = axp22x_pek_resources, -+ }, -+}; -+ - static struct resource axp288_adc_resources[] = { - { - .name = "GPADC", -@@ -426,6 +518,12 @@ static int axp20x_match_device(struct ax - axp20x->regmap_cfg = &axp20x_regmap_config; - axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip; - break; -+ case AXP221_ID: -+ axp20x->nr_cells = ARRAY_SIZE(axp22x_cells); -+ axp20x->cells = axp22x_cells; -+ axp20x->regmap_cfg = &axp22x_regmap_config; -+ axp20x->regmap_irq_chip = &axp22x_regmap_irq_chip; -+ break; - case AXP288_ID: - axp20x->cells = axp288_cells; - axp20x->nr_cells = ARRAY_SIZE(axp288_cells); ---- a/include/linux/mfd/axp20x.h -+++ b/include/linux/mfd/axp20x.h -@@ -14,6 +14,7 @@ - enum { - AXP202_ID = 0, - AXP209_ID, -+ AXP221_ID, - AXP288_ID, - NR_AXP20X_VARIANTS, - }; -@@ -45,6 +46,28 @@ enum { - #define AXP20X_V_LTF_DISCHRG 0x3c - #define AXP20X_V_HTF_DISCHRG 0x3d - -+#define AXP22X_PWR_OUT_CTRL1 0x10 -+#define AXP22X_PWR_OUT_CTRL2 0x12 -+#define AXP22X_PWR_OUT_CTRL3 0x13 -+#define AXP22X_DLDO1_V_OUT 0x15 -+#define AXP22X_DLDO2_V_OUT 0x16 -+#define AXP22X_DLDO3_V_OUT 0x17 -+#define AXP22X_DLDO4_V_OUT 0x18 -+#define AXP22X_ELDO1_V_OUT 0x19 -+#define AXP22X_ELDO2_V_OUT 0x1a -+#define AXP22X_ELDO3_V_OUT 0x1b -+#define AXP22X_DC5LDO_V_OUT 0x1c -+#define AXP22X_DCDC1_V_OUT 0x21 -+#define AXP22X_DCDC2_V_OUT 0x22 -+#define AXP22X_DCDC3_V_OUT 0x23 -+#define AXP22X_DCDC4_V_OUT 0x24 -+#define AXP22X_DCDC5_V_OUT 0x25 -+#define AXP22X_DCDC23_V_RAMP_CTRL 0x27 -+#define AXP22X_ALDO1_V_OUT 0x28 -+#define AXP22X_ALDO2_V_OUT 0x29 -+#define AXP22X_ALDO3_V_OUT 0x2a -+#define AXP22X_CHRG_CTRL3 0x35 -+ - /* Interrupt */ - #define AXP20X_IRQ1_EN 0x40 - #define AXP20X_IRQ2_EN 0x41 -@@ -100,6 +123,9 @@ enum { - #define AXP20X_VBUS_MON 0x8b - #define AXP20X_OVER_TMP 0x8f - -+#define AXP22X_PWREN_CTRL1 0x8c -+#define AXP22X_PWREN_CTRL2 0x8d -+ - /* GPIO */ - #define AXP20X_GPIO0_CTRL 0x90 - #define AXP20X_LDO5_V_OUT 0x91 -@@ -108,6 +134,11 @@ enum { - #define AXP20X_GPIO20_SS 0x94 - #define AXP20X_GPIO3_CTRL 0x95 - -+#define AXP22X_LDO_IO0_V_OUT 0x91 -+#define AXP22X_LDO_IO1_V_OUT 0x93 -+#define AXP22X_GPIO_STATE 0x94 -+#define AXP22X_GPIO_PULL_DOWN 0x95 -+ - /* Battery */ - #define AXP20X_CHRG_CC_31_24 0xb0 - #define AXP20X_CHRG_CC_23_16 0xb1 -@@ -120,6 +151,9 @@ enum { - #define AXP20X_CC_CTRL 0xb8 - #define AXP20X_FG_RES 0xb9 - -+/* AXP22X specific registers */ -+#define AXP22X_BATLOW_THRES1 0xe6 -+ - /* AXP288 specific registers */ - #define AXP288_PMIC_ADC_H 0x56 - #define AXP288_PMIC_ADC_L 0x57 -@@ -158,6 +192,30 @@ enum { - AXP20X_REG_ID_MAX, - }; - -+enum { -+ AXP22X_DCDC1 = 0, -+ AXP22X_DCDC2, -+ AXP22X_DCDC3, -+ AXP22X_DCDC4, -+ AXP22X_DCDC5, -+ AXP22X_DC1SW, -+ AXP22X_DC5LDO, -+ AXP22X_ALDO1, -+ AXP22X_ALDO2, -+ AXP22X_ALDO3, -+ AXP22X_ELDO1, -+ AXP22X_ELDO2, -+ AXP22X_ELDO3, -+ AXP22X_DLDO1, -+ AXP22X_DLDO2, -+ AXP22X_DLDO3, -+ AXP22X_DLDO4, -+ AXP22X_RTC_LDO, -+ AXP22X_LDO_IO0, -+ AXP22X_LDO_IO1, -+ AXP22X_REG_ID_MAX, -+}; -+ - /* IRQs */ - enum { - AXP20X_IRQ_ACIN_OVER_V = 1, -@@ -199,6 +257,34 @@ enum { - AXP20X_IRQ_GPIO0_INPUT, - }; - -+enum axp22x_irqs { -+ AXP22X_IRQ_ACIN_OVER_V = 1, -+ AXP22X_IRQ_ACIN_PLUGIN, -+ AXP22X_IRQ_ACIN_REMOVAL, -+ AXP22X_IRQ_VBUS_OVER_V, -+ AXP22X_IRQ_VBUS_PLUGIN, -+ AXP22X_IRQ_VBUS_REMOVAL, -+ AXP22X_IRQ_VBUS_V_LOW, -+ AXP22X_IRQ_BATT_PLUGIN, -+ AXP22X_IRQ_BATT_REMOVAL, -+ AXP22X_IRQ_BATT_ENT_ACT_MODE, -+ AXP22X_IRQ_BATT_EXIT_ACT_MODE, -+ AXP22X_IRQ_CHARG, -+ AXP22X_IRQ_CHARG_DONE, -+ AXP22X_IRQ_BATT_TEMP_HIGH, -+ AXP22X_IRQ_BATT_TEMP_LOW, -+ AXP22X_IRQ_DIE_TEMP_HIGH, -+ AXP22X_IRQ_PEK_SHORT, -+ AXP22X_IRQ_PEK_LONG, -+ AXP22X_IRQ_LOW_PWR_LVL1, -+ AXP22X_IRQ_LOW_PWR_LVL2, -+ AXP22X_IRQ_TIMER, -+ AXP22X_IRQ_PEK_RIS_EDGE, -+ AXP22X_IRQ_PEK_FAL_EDGE, -+ AXP22X_IRQ_GPIO1_INPUT, -+ AXP22X_IRQ_GPIO0_INPUT, -+}; -+ - enum axp288_irqs { - AXP288_IRQ_VBUS_FALL = 2, - AXP288_IRQ_VBUS_RISE, diff --git a/target/linux/sunxi/patches-4.1/101-regulator-axp20x-prep-support-for-multiple-axp-families.patch b/target/linux/sunxi/patches-4.1/101-regulator-axp20x-prep-support-for-multiple-axp-families.patch deleted file mode 100644 index 21fe2ec..0000000 --- a/target/linux/sunxi/patches-4.1/101-regulator-axp20x-prep-support-for-multiple-axp-families.patch +++ /dev/null @@ -1,278 +0,0 @@ -From f95b73ba272eac5495e69e12795d5ea8bc81d2cd Mon Sep 17 00:00:00 2001 -From: Boris BREZILLON <boris.brezillon@free-electrons.com> -Date: Fri, 10 Apr 2015 12:09:03 +0800 -Subject: [PATCH] regulator: axp20x: Prepare support for multiple AXP chip - families - -Rework the AXP20X_ macros and probe function to support the several chip -families, so that each family can define it's own set of regulators. - -Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> -[wens@csie.org: Support different DC-DC work frequency ranges] -Signed-off-by: Chen-Yu Tsai <wens@csie.org> -Reviewed-by: Mark Brown <broonie@kernel.org> -Signed-off-by: Lee Jones <lee.jones@linaro.org> ---- - drivers/regulator/axp20x-regulator.c | 143 +++++++++++++++++++++++------------ - 1 file changed, 94 insertions(+), 49 deletions(-) - ---- a/drivers/regulator/axp20x-regulator.c -+++ b/drivers/regulator/axp20x-regulator.c -@@ -32,15 +32,15 @@ - - #define AXP20X_FREQ_DCDC_MASK 0x0f - --#define AXP20X_DESC_IO(_id, _match, _supply, _min, _max, _step, _vreg, _vmask, \ -- _ereg, _emask, _enable_val, _disable_val) \ -- [AXP20X_##_id] = { \ -+#define AXP_DESC_IO(_family, _id, _match, _supply, _min, _max, _step, _vreg, \ -+ _vmask, _ereg, _emask, _enable_val, _disable_val) \ -+ [_family##_##_id] = { \ - .name = #_id, \ - .supply_name = (_supply), \ - .of_match = of_match_ptr(_match), \ - .regulators_node = of_match_ptr("regulators"), \ - .type = REGULATOR_VOLTAGE, \ -- .id = AXP20X_##_id, \ -+ .id = _family##_##_id, \ - .n_voltages = (((_max) - (_min)) / (_step) + 1), \ - .owner = THIS_MODULE, \ - .min_uV = (_min) * 1000, \ -@@ -54,15 +54,15 @@ - .ops = &axp20x_ops, \ - } - --#define AXP20X_DESC(_id, _match, _supply, _min, _max, _step, _vreg, _vmask, \ -- _ereg, _emask) \ -- [AXP20X_##_id] = { \ -+#define AXP_DESC(_family, _id, _match, _supply, _min, _max, _step, _vreg, \ -+ _vmask, _ereg, _emask) \ -+ [_family##_##_id] = { \ - .name = #_id, \ - .supply_name = (_supply), \ - .of_match = of_match_ptr(_match), \ - .regulators_node = of_match_ptr("regulators"), \ - .type = REGULATOR_VOLTAGE, \ -- .id = AXP20X_##_id, \ -+ .id = _family##_##_id, \ - .n_voltages = (((_max) - (_min)) / (_step) + 1), \ - .owner = THIS_MODULE, \ - .min_uV = (_min) * 1000, \ -@@ -74,29 +74,29 @@ - .ops = &axp20x_ops, \ - } - --#define AXP20X_DESC_FIXED(_id, _match, _supply, _volt) \ -- [AXP20X_##_id] = { \ -+#define AXP_DESC_FIXED(_family, _id, _match, _supply, _volt) \ -+ [_family##_##_id] = { \ - .name = #_id, \ - .supply_name = (_supply), \ - .of_match = of_match_ptr(_match), \ - .regulators_node = of_match_ptr("regulators"), \ - .type = REGULATOR_VOLTAGE, \ -- .id = AXP20X_##_id, \ -+ .id = _family##_##_id, \ - .n_voltages = 1, \ - .owner = THIS_MODULE, \ - .min_uV = (_volt) * 1000, \ - .ops = &axp20x_ops_fixed \ - } - --#define AXP20X_DESC_TABLE(_id, _match, _supply, _table, _vreg, _vmask, _ereg, \ -- _emask) \ -- [AXP20X_##_id] = { \ -+#define AXP_DESC_TABLE(_family, _id, _match, _supply, _table, _vreg, _vmask, \ -+ _ereg, _emask) \ -+ [_family##_##_id] = { \ - .name = #_id, \ - .supply_name = (_supply), \ - .of_match = of_match_ptr(_match), \ - .regulators_node = of_match_ptr("regulators"), \ - .type = REGULATOR_VOLTAGE, \ -- .id = AXP20X_##_id, \ -+ .id = _family##_##_id, \ - .n_voltages = ARRAY_SIZE(_table), \ - .owner = THIS_MODULE, \ - .vsel_reg = (_vreg), \ -@@ -136,37 +136,57 @@ static struct regulator_ops axp20x_ops = - }; - - static const struct regulator_desc axp20x_regulators[] = { -- AXP20X_DESC(DCDC2, "dcdc2", "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT, -- 0x3f, AXP20X_PWR_OUT_CTRL, 0x10), -- AXP20X_DESC(DCDC3, "dcdc3", "vin3", 700, 3500, 25, AXP20X_DCDC3_V_OUT, -- 0x7f, AXP20X_PWR_OUT_CTRL, 0x02), -- AXP20X_DESC_FIXED(LDO1, "ldo1", "acin", 1300), -- AXP20X_DESC(LDO2, "ldo2", "ldo24in", 1800, 3300, 100, -- AXP20X_LDO24_V_OUT, 0xf0, AXP20X_PWR_OUT_CTRL, 0x04), -- AXP20X_DESC(LDO3, "ldo3", "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT, -- 0x7f, AXP20X_PWR_OUT_CTRL, 0x40), -- AXP20X_DESC_TABLE(LDO4, "ldo4", "ldo24in", axp20x_ldo4_data, -- AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, 0x08), -- AXP20X_DESC_IO(LDO5, "ldo5", "ldo5in", 1800, 3300, 100, -- AXP20X_LDO5_V_OUT, 0xf0, AXP20X_GPIO0_CTRL, 0x07, -- AXP20X_IO_ENABLED, AXP20X_IO_DISABLED), -+ AXP_DESC(AXP20X, DCDC2, "dcdc2", "vin2", 700, 2275, 25, -+ AXP20X_DCDC2_V_OUT, 0x3f, AXP20X_PWR_OUT_CTRL, 0x10), -+ AXP_DESC(AXP20X, DCDC3, "dcdc3", "vin3", 700, 3500, 25, -+ AXP20X_DCDC3_V_OUT, 0x7f, AXP20X_PWR_OUT_CTRL, 0x02), -+ AXP_DESC_FIXED(AXP20X, LDO1, "ldo1", "acin", 1300), -+ AXP_DESC(AXP20X, LDO2, "ldo2", "ldo24in", 1800, 3300, 100, -+ AXP20X_LDO24_V_OUT, 0xf0, AXP20X_PWR_OUT_CTRL, 0x04), -+ AXP_DESC(AXP20X, LDO3, "ldo3", "ldo3in", 700, 3500, 25, -+ AXP20X_LDO3_V_OUT, 0x7f, AXP20X_PWR_OUT_CTRL, 0x40), -+ AXP_DESC_TABLE(AXP20X, LDO4, "ldo4", "ldo24in", axp20x_ldo4_data, -+ AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, 0x08), -+ AXP_DESC_IO(AXP20X, LDO5, "ldo5", "ldo5in", 1800, 3300, 100, -+ AXP20X_LDO5_V_OUT, 0xf0, AXP20X_GPIO0_CTRL, 0x07, -+ AXP20X_IO_ENABLED, AXP20X_IO_DISABLED), - }; - - static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) - { - struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); -+ u32 min, max, def, step; - -- if (dcdcfreq < 750) { -- dcdcfreq = 750; -- dev_warn(&pdev->dev, "DCDC frequency too low. Set to 750kHz\n"); -+ switch (axp20x->variant) { -+ case AXP202_ID: -+ case AXP209_ID: -+ min = 750; -+ max = 1875; -+ def = 1500; -+ step = 75; -+ break; -+ default: -+ dev_err(&pdev->dev, -+ "Setting DCDC frequency for unsupported AXP variant\n"); -+ return -EINVAL; - } - -- if (dcdcfreq > 1875) { -- dcdcfreq = 1875; -- dev_warn(&pdev->dev, "DCDC frequency too high. Set to 1875kHz\n"); -+ if (dcdcfreq == 0) -+ dcdcfreq = def; -+ -+ if (dcdcfreq < min) { -+ dcdcfreq = min; -+ dev_warn(&pdev->dev, "DCDC frequency too low. Set to %ukHz\n", -+ min); - } - -- dcdcfreq = (dcdcfreq - 750) / 75; -+ if (dcdcfreq > max) { -+ dcdcfreq = max; -+ dev_warn(&pdev->dev, "DCDC frequency too high. Set to %ukHz\n", -+ max); -+ } -+ -+ dcdcfreq = (dcdcfreq - min) / step; - - return regmap_update_bits(axp20x->regmap, AXP20X_DCDC_FREQ, - AXP20X_FREQ_DCDC_MASK, dcdcfreq); -@@ -176,7 +196,7 @@ static int axp20x_regulator_parse_dt(str - { - struct device_node *np, *regulators; - int ret; -- u32 dcdcfreq; -+ u32 dcdcfreq = 0; - - np = of_node_get(pdev->dev.parent->of_node); - if (!np) -@@ -186,7 +206,6 @@ static int axp20x_regulator_parse_dt(str - if (!regulators) { - dev_warn(&pdev->dev, "regulators node not found\n"); - } else { -- dcdcfreq = 1500; - of_property_read_u32(regulators, "x-powers,dcdc-freq", &dcdcfreq); - ret = axp20x_set_dcdc_freq(pdev, dcdcfreq); - if (ret < 0) { -@@ -202,15 +221,27 @@ static int axp20x_regulator_parse_dt(str - - static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 workmode) - { -- unsigned int mask = AXP20X_WORKMODE_DCDC2_MASK; -+ struct axp20x_dev *axp20x = rdev_get_drvdata(rdev); -+ unsigned int mask; - -- if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3)) -+ switch (axp20x->variant) { -+ case AXP202_ID: -+ case AXP209_ID: -+ if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3)) -+ return -EINVAL; -+ -+ mask = AXP20X_WORKMODE_DCDC2_MASK; -+ if (id == AXP20X_DCDC3) -+ mask = AXP20X_WORKMODE_DCDC3_MASK; -+ -+ workmode <<= ffs(mask) - 1; -+ break; -+ -+ default: -+ /* should not happen */ -+ WARN_ON(1); - return -EINVAL; -- -- if (id == AXP20X_DCDC3) -- mask = AXP20X_WORKMODE_DCDC3_MASK; -- -- workmode <<= ffs(mask) - 1; -+ } - - return regmap_update_bits(rdev->regmap, AXP20X_DCDC_MODE, mask, workmode); - } -@@ -219,22 +250,36 @@ static int axp20x_regulator_probe(struct - { - struct regulator_dev *rdev; - struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); -+ const struct regulator_desc *regulators; - struct regulator_config config = { - .dev = pdev->dev.parent, - .regmap = axp20x->regmap, -+ .driver_data = axp20x, - }; -- int ret, i; -+ int ret, i, nregulators; - u32 workmode; - -+ switch (axp20x->variant) { -+ case AXP202_ID: -+ case AXP209_ID: -+ regulators = axp20x_regulators; -+ nregulators = AXP20X_REG_ID_MAX; -+ break; -+ default: -+ dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n", -+ axp20x->variant); -+ return -EINVAL; -+ } -+ - /* This only sets the dcdc freq. Ignore any errors */ - axp20x_regulator_parse_dt(pdev); - -- for (i = 0; i < AXP20X_REG_ID_MAX; i++) { -- rdev = devm_regulator_register(&pdev->dev, &axp20x_regulators[i], -+ for (i = 0; i < nregulators; i++) { -+ rdev = devm_regulator_register(&pdev->dev, ®ulators[i], - &config); - if (IS_ERR(rdev)) { - dev_err(&pdev->dev, "Failed to register %s\n", -- axp20x_regulators[i].name); -+ regulators[i].name); - - return PTR_ERR(rdev); - } -@@ -245,7 +290,7 @@ static int axp20x_regulator_probe(struct - if (!ret) { - if (axp20x_set_dcdc_workmode(rdev, i, workmode)) - dev_err(&pdev->dev, "Failed to set workmode on %s\n", -- axp20x_regulators[i].name); -+ rdev->desc->name); - } - } - diff --git a/target/linux/sunxi/patches-4.1/102-regulator-axp20x-add-support-for-axp22.patch b/target/linux/sunxi/patches-4.1/102-regulator-axp20x-add-support-for-axp22.patch deleted file mode 100644 index cc5bc4f..0000000 --- a/target/linux/sunxi/patches-4.1/102-regulator-axp20x-add-support-for-axp22.patch +++ /dev/null @@ -1,170 +0,0 @@ -From c3f89434c9d778572cf09e8327bd047b11d48b90 Mon Sep 17 00:00:00 2001 -From: Boris BREZILLON <boris.brezillon@free-electrons.com> -Date: Fri, 10 Apr 2015 12:09:04 +0800 -Subject: [PATCH] regulator: axp20x: Add support for AXP22X regulators - -Add AXP22X regulator definitions and variant id associations. -This introduces a new "switch" type output for one of the regulators. -It is a switchable secondary output of one regulator, with the same -voltage level as the primary output. - -Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> -[wens@csie.org: Moved variant choosing to multi family support patch] -[wens@csie.org: Add dc-dc work frequency range] -[wens@csie.org: Add "switch" type output regulator DC1SW] -Signed-off-by: Chen-Yu Tsai <wens@csie.org> -Reviewed-by: Mark Brown <broonie@kernel.org> -Signed-off-by: Lee Jones <lee.jones@linaro.org> ---- - drivers/regulator/axp20x-regulator.c | 96 ++++++++++++++++++++++++++++++++++++ - 1 file changed, 96 insertions(+) - ---- a/drivers/regulator/axp20x-regulator.c -+++ b/drivers/regulator/axp20x-regulator.c -@@ -27,8 +27,12 @@ - #define AXP20X_IO_ENABLED 0x03 - #define AXP20X_IO_DISABLED 0x07 - -+#define AXP22X_IO_ENABLED 0x04 -+#define AXP22X_IO_DISABLED 0x03 -+ - #define AXP20X_WORKMODE_DCDC2_MASK BIT(2) - #define AXP20X_WORKMODE_DCDC3_MASK BIT(1) -+#define AXP22X_WORKMODE_DCDCX_MASK(x) BIT(x) - - #define AXP20X_FREQ_DCDC_MASK 0x0f - -@@ -74,6 +78,26 @@ - .ops = &axp20x_ops, \ - } - -+#define AXP_DESC_SW(_family, _id, _match, _supply, _min, _max, _step, _vreg, \ -+ _vmask, _ereg, _emask) \ -+ [_family##_##_id] = { \ -+ .name = #_id, \ -+ .supply_name = (_supply), \ -+ .of_match = of_match_ptr(_match), \ -+ .regulators_node = of_match_ptr("regulators"), \ -+ .type = REGULATOR_VOLTAGE, \ -+ .id = _family##_##_id, \ -+ .n_voltages = (((_max) - (_min)) / (_step) + 1), \ -+ .owner = THIS_MODULE, \ -+ .min_uV = (_min) * 1000, \ -+ .uV_step = (_step) * 1000, \ -+ .vsel_reg = (_vreg), \ -+ .vsel_mask = (_vmask), \ -+ .enable_reg = (_ereg), \ -+ .enable_mask = (_emask), \ -+ .ops = &axp20x_ops_sw, \ -+ } -+ - #define AXP_DESC_FIXED(_family, _id, _match, _supply, _volt) \ - [_family##_##_id] = { \ - .name = #_id, \ -@@ -135,6 +159,14 @@ static struct regulator_ops axp20x_ops = - .is_enabled = regulator_is_enabled_regmap, - }; - -+static struct regulator_ops axp20x_ops_sw = { -+ .get_voltage_sel = regulator_get_voltage_sel_regmap, -+ .list_voltage = regulator_list_voltage_linear, -+ .enable = regulator_enable_regmap, -+ .disable = regulator_disable_regmap, -+ .is_enabled = regulator_is_enabled_regmap, -+}; -+ - static const struct regulator_desc axp20x_regulators[] = { - AXP_DESC(AXP20X, DCDC2, "dcdc2", "vin2", 700, 2275, 25, - AXP20X_DCDC2_V_OUT, 0x3f, AXP20X_PWR_OUT_CTRL, 0x10), -@@ -152,6 +184,52 @@ static const struct regulator_desc axp20 - AXP20X_IO_ENABLED, AXP20X_IO_DISABLED), - }; - -+static const struct regulator_desc axp22x_regulators[] = { -+ AXP_DESC(AXP22X, DCDC1, "dcdc1", "vin1", 1600, 3400, 100, -+ AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(1)), -+ AXP_DESC(AXP22X, DCDC2, "dcdc2", "vin2", 600, 1540, 20, -+ AXP22X_DCDC2_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(2)), -+ AXP_DESC(AXP22X, DCDC3, "dcdc3", "vin3", 600, 1860, 20, -+ AXP22X_DCDC3_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(3)), -+ AXP_DESC(AXP22X, DCDC4, "dcdc4", "vin4", 600, 1540, 20, -+ AXP22X_DCDC4_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(3)), -+ AXP_DESC(AXP22X, DCDC5, "dcdc5", "vin5", 1000, 2550, 50, -+ AXP22X_DCDC5_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(4)), -+ /* secondary switchable output of DCDC1 */ -+ AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", "dcdc1", 1600, 3400, 100, -+ AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(7)), -+ /* LDO regulator internally chained to DCDC5 */ -+ AXP_DESC(AXP22X, DC5LDO, "dc5ldo", "dcdc5", 700, 1400, 100, -+ AXP22X_DC5LDO_V_OUT, 0x7, AXP22X_PWR_OUT_CTRL1, BIT(0)), -+ AXP_DESC(AXP22X, ALDO1, "aldo1", "aldoin", 700, 3300, 100, -+ AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(6)), -+ AXP_DESC(AXP22X, ALDO2, "aldo2", "aldoin", 700, 3300, 100, -+ AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(7)), -+ AXP_DESC(AXP22X, ALDO3, "aldo3", "aldoin", 700, 3300, 100, -+ AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(7)), -+ AXP_DESC(AXP22X, DLDO1, "dldo1", "dldoin", 700, 3300, 100, -+ AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(3)), -+ AXP_DESC(AXP22X, DLDO2, "dldo2", "dldoin", 700, 3300, 100, -+ AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(4)), -+ AXP_DESC(AXP22X, DLDO3, "dldo3", "dldoin", 700, 3300, 100, -+ AXP22X_DLDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)), -+ AXP_DESC(AXP22X, DLDO4, "dldo4", "dldoin", 700, 3300, 100, -+ AXP22X_DLDO4_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(6)), -+ AXP_DESC(AXP22X, ELDO1, "eldo1", "eldoin", 700, 3300, 100, -+ AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)), -+ AXP_DESC(AXP22X, ELDO2, "eldo2", "eldoin", 700, 3300, 100, -+ AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)), -+ AXP_DESC(AXP22X, ELDO3, "eldo3", "eldoin", 700, 3300, 100, -+ AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)), -+ AXP_DESC_IO(AXP22X, LDO_IO0, "ldo_io0", "ips", 1800, 3300, 100, -+ AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07, -+ AXP22X_IO_ENABLED, AXP22X_IO_DISABLED), -+ AXP_DESC_IO(AXP22X, LDO_IO1, "ldo_io1", "ips", 1800, 3300, 100, -+ AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07, -+ AXP22X_IO_ENABLED, AXP22X_IO_DISABLED), -+ AXP_DESC_FIXED(AXP22X, RTC_LDO, "rtc_ldo", "ips", 3000), -+}; -+ - static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) - { - struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); -@@ -165,6 +243,12 @@ static int axp20x_set_dcdc_freq(struct p - def = 1500; - step = 75; - break; -+ case AXP221_ID: -+ min = 1800; -+ max = 4050; -+ def = 3000; -+ step = 150; -+ break; - default: - dev_err(&pdev->dev, - "Setting DCDC frequency for unsupported AXP variant\n"); -@@ -237,6 +321,14 @@ static int axp20x_set_dcdc_workmode(stru - workmode <<= ffs(mask) - 1; - break; - -+ case AXP221_ID: -+ if (id < AXP22X_DCDC1 || id > AXP22X_DCDC5) -+ return -EINVAL; -+ -+ mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP22X_DCDC1); -+ workmode <<= id - AXP22X_DCDC1; -+ break; -+ - default: - /* should not happen */ - WARN_ON(1); -@@ -265,6 +357,10 @@ static int axp20x_regulator_probe(struct - regulators = axp20x_regulators; - nregulators = AXP20X_REG_ID_MAX; - break; -+ case AXP221_ID: -+ regulators = axp22x_regulators; -+ nregulators = AXP22X_REG_ID_MAX; -+ break; - default: - dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n", - axp20x->variant); diff --git a/target/linux/sunxi/patches-4.1/103-mfd-axp20x-add-missing-registers.patch b/target/linux/sunxi/patches-4.1/103-mfd-axp20x-add-missing-registers.patch deleted file mode 100644 index a458579..0000000 --- a/target/linux/sunxi/patches-4.1/103-mfd-axp20x-add-missing-registers.patch +++ /dev/null @@ -1,71 +0,0 @@ -From 5469e15c9a0025e8822762ab9acfc3ee50e55c2c Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= <bonbons@linux-vserver.org> -Date: Tue, 9 Jun 2015 08:30:48 +0200 -Subject: [PATCH] mfd: axp20x: Add missing registers, and mark more registers - volatile -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add an extra set of registers which is necessary tu support the PMICs -battery charger function, and mark registers which contain status bits, -gpio status, and adc readings as volatile. - -Cc: Bruno Prémont <bonbons@linux-vserver.org> -Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> -Acked-by: Lee Jones <lee.jones@linaro.org> -Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> ---- -Changes in v2: --Add a AXP20X_OCV_MAX define -Changes in v3: --Add Bruno's S-o-b ---- - drivers/mfd/axp20x.c | 8 +++++++- - include/linux/mfd/axp20x.h | 6 ++++++ - 2 files changed, 13 insertions(+), 1 deletion(-) - ---- a/drivers/mfd/axp20x.c -+++ b/drivers/mfd/axp20x.c -@@ -39,10 +39,16 @@ static const char * const axp20x_model_n - static const struct regmap_range axp20x_writeable_ranges[] = { - regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), - regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES), -+ regmap_reg_range(AXP20X_RDC_H, AXP20X_OCV(15)), - }; - - static const struct regmap_range axp20x_volatile_ranges[] = { -+ regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP20X_USB_OTG_STATUS), -+ regmap_reg_range(AXP20X_CHRG_CTRL1, AXP20X_CHRG_CTRL2), - regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE), -+ regmap_reg_range(AXP20X_ACIN_V_ADC_H, AXP20X_IPSOUT_V_HIGH_L), -+ regmap_reg_range(AXP20X_GPIO20_SS, AXP20X_GPIO3_CTRL), -+ regmap_reg_range(AXP20X_FG_RES, AXP20X_RDC_L), - }; - - static const struct regmap_access_table axp20x_writeable_table = { -@@ -159,7 +165,7 @@ static const struct regmap_config axp20x - .val_bits = 8, - .wr_table = &axp20x_writeable_table, - .volatile_table = &axp20x_volatile_table, -- .max_register = AXP20X_FG_RES, -+ .max_register = AXP20X_OCV(AXP20X_OCV_MAX), - .cache_type = REGCACHE_RBTREE, - }; - ---- a/include/linux/mfd/axp20x.h -+++ b/include/linux/mfd/axp20x.h -@@ -151,6 +151,12 @@ enum { - #define AXP20X_CC_CTRL 0xb8 - #define AXP20X_FG_RES 0xb9 - -+/* OCV */ -+#define AXP20X_RDC_H 0xba -+#define AXP20X_RDC_L 0xbb -+#define AXP20X_OCV(m) (0xc0 + (m)) -+#define AXP20X_OCV_MAX 0xf -+ - /* AXP22X specific registers */ - #define AXP22X_BATLOW_THRES1 0xe6 - diff --git a/target/linux/sunxi/patches-4.1/104-mfd-axp20x-enable-axp22x.patch b/target/linux/sunxi/patches-4.1/104-mfd-axp20x-enable-axp22x.patch deleted file mode 100644 index f0c9055..0000000 --- a/target/linux/sunxi/patches-4.1/104-mfd-axp20x-enable-axp22x.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 6d4fa89dcd85e2427da83319ce75e5df5febcc96 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai <wens@csie.org> -Date: Fri, 10 Apr 2015 12:09:06 +0800 -Subject: [PATCH] mfd: axp20x: Enable AXP22X regulators - -Now that the axp20x-regulators driver supports different variants of the -AXP family, we can enable regulator support for AXP22X without the risk -of incorrectly configuring regulators. - -Signed-off-by: Chen-Yu Tsai <wens@csie.org> -Signed-off-by: Lee Jones <lee.jones@linaro.org> ---- - drivers/mfd/axp20x.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/mfd/axp20x.c -+++ b/drivers/mfd/axp20x.c -@@ -376,6 +376,8 @@ static struct mfd_cell axp22x_cells[] = - .name = "axp20x-pek", - .num_resources = ARRAY_SIZE(axp22x_pek_resources), - .resources = axp22x_pek_resources, -+ }, { -+ .name = "axp20x-regulator", - }, - }; - diff --git a/target/linux/sunxi/patches-4.1/105-mfd-axp20x-add-axp152-support.patch b/target/linux/sunxi/patches-4.1/105-mfd-axp20x-add-axp152-support.patch deleted file mode 100644 index a653f94..0000000 --- a/target/linux/sunxi/patches-4.1/105-mfd-axp20x-add-axp152-support.patch +++ /dev/null @@ -1,261 +0,0 @@ -From a50e5abe10c95108ece5d3a91027570e66b5f238 Mon Sep 17 00:00:00 2001 -From: Michal Suchanek <hramrach@gmail.com> -Date: Sat, 11 Jul 2015 14:59:56 +0200 -Subject: [PATCH] mfd: axp20x: Add axp152 support - -The axp152 is a stripped down version of the axp202 pmic with the battery -charging function removed as it is intended for top-set boxes. - -Signed-off-by: Michal Suchanek <hramrach@gmail.com> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> -Signed-off-by: Lee Jones <lee.jones@linaro.org> ---- - drivers/mfd/axp20x.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++ - include/linux/mfd/axp20x.h | 61 +++++++++++++++++++++++++++++++++- - 2 files changed, 143 insertions(+), 1 deletion(-) - ---- a/drivers/mfd/axp20x.c -+++ b/drivers/mfd/axp20x.c -@@ -30,12 +30,34 @@ - #define AXP20X_OFF 0x80 - - static const char * const axp20x_model_names[] = { -+ "AXP152", - "AXP202", - "AXP209", - "AXP221", - "AXP288", - }; - -+static const struct regmap_range axp152_writeable_ranges[] = { -+ regmap_reg_range(AXP152_LDO3456_DC1234_CTRL, AXP152_IRQ3_STATE), -+ regmap_reg_range(AXP152_DCDC_MODE, AXP152_PWM1_DUTY_CYCLE), -+}; -+ -+static const struct regmap_range axp152_volatile_ranges[] = { -+ regmap_reg_range(AXP152_PWR_OP_MODE, AXP152_PWR_OP_MODE), -+ regmap_reg_range(AXP152_IRQ1_EN, AXP152_IRQ3_STATE), -+ regmap_reg_range(AXP152_GPIO_INPUT, AXP152_GPIO_INPUT), -+}; -+ -+static const struct regmap_access_table axp152_writeable_table = { -+ .yes_ranges = axp152_writeable_ranges, -+ .n_yes_ranges = ARRAY_SIZE(axp152_writeable_ranges), -+}; -+ -+static const struct regmap_access_table axp152_volatile_table = { -+ .yes_ranges = axp152_volatile_ranges, -+ .n_yes_ranges = ARRAY_SIZE(axp152_volatile_ranges), -+}; -+ - static const struct regmap_range axp20x_writeable_ranges[] = { - regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), - regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES), -@@ -99,6 +121,11 @@ static const struct regmap_access_table - .n_yes_ranges = ARRAY_SIZE(axp288_volatile_ranges), - }; - -+static struct resource axp152_pek_resources[] = { -+ DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_RIS_EDGE, "PEK_DBR"), -+ DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_FAL_EDGE, "PEK_DBF"), -+}; -+ - static struct resource axp20x_pek_resources[] = { - { - .name = "PEK_DBR", -@@ -160,6 +187,15 @@ static struct resource axp288_fuel_gauge - }, - }; - -+static const struct regmap_config axp152_regmap_config = { -+ .reg_bits = 8, -+ .val_bits = 8, -+ .wr_table = &axp152_writeable_table, -+ .volatile_table = &axp152_volatile_table, -+ .max_register = AXP152_PWM1_DUTY_CYCLE, -+ .cache_type = REGCACHE_RBTREE, -+}; -+ - static const struct regmap_config axp20x_regmap_config = { - .reg_bits = 8, - .val_bits = 8, -@@ -190,6 +226,26 @@ static const struct regmap_config axp288 - #define INIT_REGMAP_IRQ(_variant, _irq, _off, _mask) \ - [_variant##_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) } - -+static const struct regmap_irq axp152_regmap_irqs[] = { -+ INIT_REGMAP_IRQ(AXP152, LDO0IN_CONNECT, 0, 6), -+ INIT_REGMAP_IRQ(AXP152, LDO0IN_REMOVAL, 0, 5), -+ INIT_REGMAP_IRQ(AXP152, ALDO0IN_CONNECT, 0, 3), -+ INIT_REGMAP_IRQ(AXP152, ALDO0IN_REMOVAL, 0, 2), -+ INIT_REGMAP_IRQ(AXP152, DCDC1_V_LOW, 1, 5), -+ INIT_REGMAP_IRQ(AXP152, DCDC2_V_LOW, 1, 4), -+ INIT_REGMAP_IRQ(AXP152, DCDC3_V_LOW, 1, 3), -+ INIT_REGMAP_IRQ(AXP152, DCDC4_V_LOW, 1, 2), -+ INIT_REGMAP_IRQ(AXP152, PEK_SHORT, 1, 1), -+ INIT_REGMAP_IRQ(AXP152, PEK_LONG, 1, 0), -+ INIT_REGMAP_IRQ(AXP152, TIMER, 2, 7), -+ INIT_REGMAP_IRQ(AXP152, PEK_RIS_EDGE, 2, 6), -+ INIT_REGMAP_IRQ(AXP152, PEK_FAL_EDGE, 2, 5), -+ INIT_REGMAP_IRQ(AXP152, GPIO3_INPUT, 2, 3), -+ INIT_REGMAP_IRQ(AXP152, GPIO2_INPUT, 2, 2), -+ INIT_REGMAP_IRQ(AXP152, GPIO1_INPUT, 2, 1), -+ INIT_REGMAP_IRQ(AXP152, GPIO0_INPUT, 2, 0), -+}; -+ - static const struct regmap_irq axp20x_regmap_irqs[] = { - INIT_REGMAP_IRQ(AXP20X, ACIN_OVER_V, 0, 7), - INIT_REGMAP_IRQ(AXP20X, ACIN_PLUGIN, 0, 6), -@@ -299,6 +355,7 @@ static const struct regmap_irq axp288_re - }; - - static const struct of_device_id axp20x_of_match[] = { -+ { .compatible = "x-powers,axp152", .data = (void *) AXP152_ID }, - { .compatible = "x-powers,axp202", .data = (void *) AXP202_ID }, - { .compatible = "x-powers,axp209", .data = (void *) AXP209_ID }, - { .compatible = "x-powers,axp221", .data = (void *) AXP221_ID }, -@@ -323,6 +380,18 @@ static const struct acpi_device_id axp20 - }; - MODULE_DEVICE_TABLE(acpi, axp20x_acpi_match); - -+static const struct regmap_irq_chip axp152_regmap_irq_chip = { -+ .name = "axp152_irq_chip", -+ .status_base = AXP152_IRQ1_STATE, -+ .ack_base = AXP152_IRQ1_STATE, -+ .mask_base = AXP152_IRQ1_EN, -+ .mask_invert = true, -+ .init_ack_masked = true, -+ .irqs = axp152_regmap_irqs, -+ .num_irqs = ARRAY_SIZE(axp152_regmap_irqs), -+ .num_regs = 3, -+}; -+ - static const struct regmap_irq_chip axp20x_regmap_irq_chip = { - .name = "axp20x_irq_chip", - .status_base = AXP20X_IRQ1_STATE, -@@ -381,6 +450,14 @@ static struct mfd_cell axp22x_cells[] = - }, - }; - -+static struct mfd_cell axp152_cells[] = { -+ { -+ .name = "axp20x-pek", -+ .num_resources = ARRAY_SIZE(axp152_pek_resources), -+ .resources = axp152_pek_resources, -+ }, -+}; -+ - static struct resource axp288_adc_resources[] = { - { - .name = "GPADC", -@@ -519,6 +596,12 @@ static int axp20x_match_device(struct ax - } - - switch (axp20x->variant) { -+ case AXP152_ID: -+ axp20x->nr_cells = ARRAY_SIZE(axp152_cells); -+ axp20x->cells = axp152_cells; -+ axp20x->regmap_cfg = &axp152_regmap_config; -+ axp20x->regmap_irq_chip = &axp152_regmap_irq_chip; -+ break; - case AXP202_ID: - case AXP209_ID: - axp20x->nr_cells = ARRAY_SIZE(axp20x_cells); ---- a/include/linux/mfd/axp20x.h -+++ b/include/linux/mfd/axp20x.h -@@ -12,7 +12,8 @@ - #define __LINUX_MFD_AXP20X_H - - enum { -- AXP202_ID = 0, -+ AXP152_ID = 0, -+ AXP202_ID, - AXP209_ID, - AXP221_ID, - AXP288_ID, -@@ -22,6 +23,24 @@ enum { - #define AXP20X_DATACACHE(m) (0x04 + (m)) - - /* Power supply */ -+#define AXP152_PWR_OP_MODE 0x01 -+#define AXP152_LDO3456_DC1234_CTRL 0x12 -+#define AXP152_ALDO_OP_MODE 0x13 -+#define AXP152_LDO0_CTRL 0x15 -+#define AXP152_DCDC2_V_OUT 0x23 -+#define AXP152_DCDC2_V_SCAL 0x25 -+#define AXP152_DCDC1_V_OUT 0x26 -+#define AXP152_DCDC3_V_OUT 0x27 -+#define AXP152_ALDO12_V_OUT 0x28 -+#define AXP152_DLDO1_V_OUT 0x29 -+#define AXP152_DLDO2_V_OUT 0x2a -+#define AXP152_DCDC4_V_OUT 0x2b -+#define AXP152_V_OFF 0x31 -+#define AXP152_OFF_CTRL 0x32 -+#define AXP152_PEK_KEY 0x36 -+#define AXP152_DCDC_FREQ 0x37 -+#define AXP152_DCDC_MODE 0x80 -+ - #define AXP20X_PWR_INPUT_STATUS 0x00 - #define AXP20X_PWR_OP_MODE 0x01 - #define AXP20X_USB_OTG_STATUS 0x02 -@@ -69,6 +88,13 @@ enum { - #define AXP22X_CHRG_CTRL3 0x35 - - /* Interrupt */ -+#define AXP152_IRQ1_EN 0x40 -+#define AXP152_IRQ2_EN 0x41 -+#define AXP152_IRQ3_EN 0x42 -+#define AXP152_IRQ1_STATE 0x48 -+#define AXP152_IRQ2_STATE 0x49 -+#define AXP152_IRQ3_STATE 0x4a -+ - #define AXP20X_IRQ1_EN 0x40 - #define AXP20X_IRQ2_EN 0x41 - #define AXP20X_IRQ3_EN 0x42 -@@ -127,6 +153,19 @@ enum { - #define AXP22X_PWREN_CTRL2 0x8d - - /* GPIO */ -+#define AXP152_GPIO0_CTRL 0x90 -+#define AXP152_GPIO1_CTRL 0x91 -+#define AXP152_GPIO2_CTRL 0x92 -+#define AXP152_GPIO3_CTRL 0x93 -+#define AXP152_LDOGPIO2_V_OUT 0x96 -+#define AXP152_GPIO_INPUT 0x97 -+#define AXP152_PWM0_FREQ_X 0x98 -+#define AXP152_PWM0_FREQ_Y 0x99 -+#define AXP152_PWM0_DUTY_CYCLE 0x9a -+#define AXP152_PWM1_FREQ_X 0x9b -+#define AXP152_PWM1_FREQ_Y 0x9c -+#define AXP152_PWM1_DUTY_CYCLE 0x9d -+ - #define AXP20X_GPIO0_CTRL 0x90 - #define AXP20X_LDO5_V_OUT 0x91 - #define AXP20X_GPIO1_CTRL 0x92 -@@ -224,6 +263,26 @@ enum { - - /* IRQs */ - enum { -+ AXP152_IRQ_LDO0IN_CONNECT = 1, -+ AXP152_IRQ_LDO0IN_REMOVAL, -+ AXP152_IRQ_ALDO0IN_CONNECT, -+ AXP152_IRQ_ALDO0IN_REMOVAL, -+ AXP152_IRQ_DCDC1_V_LOW, -+ AXP152_IRQ_DCDC2_V_LOW, -+ AXP152_IRQ_DCDC3_V_LOW, -+ AXP152_IRQ_DCDC4_V_LOW, -+ AXP152_IRQ_PEK_SHORT, -+ AXP152_IRQ_PEK_LONG, -+ AXP152_IRQ_TIMER, -+ AXP152_IRQ_PEK_RIS_EDGE, -+ AXP152_IRQ_PEK_FAL_EDGE, -+ AXP152_IRQ_GPIO3_INPUT, -+ AXP152_IRQ_GPIO2_INPUT, -+ AXP152_IRQ_GPIO1_INPUT, -+ AXP152_IRQ_GPIO0_INPUT, -+}; -+ -+enum { - AXP20X_IRQ_ACIN_OVER_V = 1, - AXP20X_IRQ_ACIN_PLUGIN, - AXP20X_IRQ_ACIN_REMOVAL, diff --git a/target/linux/sunxi/patches-4.1/110-mtd-move-nand_ecc_ctrl-init.patch b/target/linux/sunxi/patches-4.1/110-mtd-move-nand_ecc_ctrl-init.patch deleted file mode 100644 index f1af823..0000000 --- a/target/linux/sunxi/patches-4.1/110-mtd-move-nand_ecc_ctrl-init.patch +++ /dev/null @@ -1,135 +0,0 @@ -From 3282055a7d0a304d541dbdbe2e32167e1a2f117c Mon Sep 17 00:00:00 2001 -From: Boris BREZILLON <boris.brezillon@free-electrons.com> -Date: Mon, 28 Jul 2014 14:20:54 +0200 -Subject: [PATCH] mtd: nand: Take nand_ecc_ctrl initialization out of - nand_scan_tail - -Take ECC initialization code portion out of nand_scan_tail so that we can -re-use this implementation. - -This commit only moves some code around and makes no functional changes. - -Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - drivers/mtd/nand/nand_base.c | 91 +++++++++++++++++++++++++++----------------- - 1 file changed, 56 insertions(+), 35 deletions(-) - ---- a/drivers/mtd/nand/nand_base.c -+++ b/drivers/mtd/nand/nand_base.c -@@ -3892,42 +3892,15 @@ static bool nand_ecc_strength_good(struc - return corr >= ds_corr && ecc->strength >= chip->ecc_strength_ds; - } - --/** -- * nand_scan_tail - [NAND Interface] Scan for the NAND device -- * @mtd: MTD device structure -- * -- * This is the second phase of the normal nand_scan() function. It fills out -- * all the uninitialized function pointers with the defaults and scans for a -- * bad block table if appropriate. -+/* -+ * Initialize ECC struct: -+ * - fill ECC struct with default function/values when these ones are undefined -+ * - fill ECC infos based on MTD device - */ --int nand_scan_tail(struct mtd_info *mtd) -+static int nand_ecc_ctrl_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc) - { - int i; -- struct nand_chip *chip = mtd->priv; -- struct nand_ecc_ctrl *ecc = &chip->ecc; -- struct nand_buffers *nbuf; - -- /* New bad blocks should be marked in OOB, flash-based BBT, or both */ -- BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) && -- !(chip->bbt_options & NAND_BBT_USE_FLASH)); -- -- if (!(chip->options & NAND_OWN_BUFFERS)) { -- nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize -- + mtd->oobsize * 3, GFP_KERNEL); -- if (!nbuf) -- return -ENOMEM; -- nbuf->ecccalc = (uint8_t *)(nbuf + 1); -- nbuf->ecccode = nbuf->ecccalc + mtd->oobsize; -- nbuf->databuf = nbuf->ecccode + mtd->oobsize; -- -- chip->buffers = nbuf; -- } else { -- if (!chip->buffers) -- return -ENOMEM; -- } -- -- /* Set the internal oob buffer location, just after the page data */ -- chip->oob_poi = chip->buffers->databuf + mtd->writesize; - - /* - * If no default placement scheme is given, select an appropriate one. -@@ -3953,9 +3926,6 @@ int nand_scan_tail(struct mtd_info *mtd) - } - } - -- if (!chip->write_page) -- chip->write_page = nand_write_page; -- - /* - * Check ECC mode, default to software if 3byte/512byte hardware ECC is - * selected and we have 256 byte pagesize fallback to software ECC -@@ -4125,6 +4095,57 @@ int nand_scan_tail(struct mtd_info *mtd) - } - ecc->total = ecc->steps * ecc->bytes; - -+ return 0; -+} -+ -+/** -+ * nand_scan_tail - [NAND Interface] Scan for the NAND device -+ * @mtd: MTD device structure -+ * -+ * This is the second phase of the normal nand_scan() function. It fills out -+ * all the uninitialized function pointers with the defaults and scans for a -+ * bad block table if appropriate. -+ */ -+int nand_scan_tail(struct mtd_info *mtd) -+{ -+ int ret; -+ struct nand_chip *chip = mtd->priv; -+ struct nand_ecc_ctrl *ecc = &chip->ecc; -+ struct nand_buffers *nbuf; -+ -+ /* New bad blocks should be marked in OOB, flash-based BBT, or both */ -+ BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) && -+ !(chip->bbt_options & NAND_BBT_USE_FLASH)); -+ -+ if (!(chip->options & NAND_OWN_BUFFERS)) { -+ nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize -+ + mtd->oobsize * 3, GFP_KERNEL); -+ if (!nbuf) -+ return -ENOMEM; -+ nbuf->ecccalc = (uint8_t *)(nbuf + 1); -+ nbuf->ecccode = nbuf->ecccalc + mtd->oobsize; -+ nbuf->databuf = nbuf->ecccode + mtd->oobsize; -+ chip->buffers = nbuf; -+ } else { -+ if (!chip->buffers) -+ return -ENOMEM; -+ } -+ -+ /* Set the internal oob buffer location, just after the page data */ -+ chip->oob_poi = chip->buffers->databuf + mtd->writesize; -+ -+ if (!chip->write_page) -+ chip->write_page = nand_write_page; -+ -+ /* Initialize ECC struct */ -+ ret = nand_ecc_ctrl_init(mtd, ecc); -+ if (ret) { -+ if (!(chip->options & NAND_OWN_BUFFERS)) -+ kfree(chip->buffers); -+ -+ return ret; -+ } -+ - /* Allow subpage writes up to ecc.steps. Not possible for MLC flash */ - if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) { - switch (ecc->steps) { diff --git a/target/linux/sunxi/patches-4.1/111-mtd-add-support-for-nand-partitions.patch b/target/linux/sunxi/patches-4.1/111-mtd-add-support-for-nand-partitions.patch deleted file mode 100644 index d4eaeec..0000000 --- a/target/linux/sunxi/patches-4.1/111-mtd-add-support-for-nand-partitions.patch +++ /dev/null @@ -1,1295 +0,0 @@ -From a95cc309cf74eed3fc457dec3dcc44d9bf79e0e6 Mon Sep 17 00:00:00 2001 -From: Boris BREZILLON <boris.brezillon@free-electrons.com> -Date: Mon, 28 Jul 2014 15:01:15 +0200 -Subject: [PATCH] mtd: nand: Add support for NAND partitions - -Add support for NAND partitions, and indirectly for per partition ECC -config, and also per partiton random seed support for the upcoming -randomizer support. - -This is necessary to be able to use different ECC / randomizer settings for -the parts of the NAND which are read directly by a bootrom (which has a -fixed ECC / random seed setting) and the generic data part of the NAND for -which we often want a stronger ECC and / or random seed. - -Provide helper functions to add/delete/allocate nand partitions. -NAND core code now make use of the partition specific nand_ecc_ctrl struct -(if available) when doing read/write operations. - -Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - drivers/mtd/nand/Kconfig | 4 + - drivers/mtd/nand/Makefile | 2 + - drivers/mtd/nand/nand_base.c | 712 +++++++++++++++++++++++++++++++++++-------- - drivers/mtd/nand/nand_bch.c | 16 +- - drivers/mtd/nand/nand_ecc.c | 4 +- - include/linux/mtd/nand.h | 38 +++ - 6 files changed, 635 insertions(+), 141 deletions(-) - ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -22,6 +22,10 @@ menuconfig MTD_NAND - - if MTD_NAND - -+config MTD_OF_NAND_PARTS -+ tristate -+ default n -+ - config MTD_NAND_BCH - tristate - select BCH ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -53,4 +53,6 @@ obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += - obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_nand.o - obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o - -+obj-$(CONFIG_MTD_OF_NAND_PARTS) += ofnandpart.o -+ - nand-objs := nand_base.o nand_bbt.o nand_timings.o ---- a/drivers/mtd/nand/nand_base.c -+++ b/drivers/mtd/nand/nand_base.c -@@ -1134,26 +1134,26 @@ static int nand_read_page_raw_syndrome(s - struct nand_chip *chip, uint8_t *buf, - int oob_required, int page) - { -- int eccsize = chip->ecc.size; -- int eccbytes = chip->ecc.bytes; -+ int eccsize = chip->cur_ecc->size; -+ int eccbytes = chip->cur_ecc->bytes; - uint8_t *oob = chip->oob_poi; - int steps, size; - -- for (steps = chip->ecc.steps; steps > 0; steps--) { -+ for (steps = chip->cur_ecc->steps; steps > 0; steps--) { - chip->read_buf(mtd, buf, eccsize); - buf += eccsize; - -- if (chip->ecc.prepad) { -- chip->read_buf(mtd, oob, chip->ecc.prepad); -- oob += chip->ecc.prepad; -+ if (chip->cur_ecc->prepad) { -+ chip->read_buf(mtd, oob, chip->cur_ecc->prepad); -+ oob += chip->cur_ecc->prepad; - } - - chip->read_buf(mtd, oob, eccbytes); - oob += eccbytes; - -- if (chip->ecc.postpad) { -- chip->read_buf(mtd, oob, chip->ecc.postpad); -- oob += chip->ecc.postpad; -+ if (chip->cur_ecc->postpad) { -+ chip->read_buf(mtd, oob, chip->cur_ecc->postpad); -+ oob += chip->cur_ecc->postpad; - } - } - -@@ -1175,30 +1175,31 @@ static int nand_read_page_raw_syndrome(s - static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int oob_required, int page) - { -- int i, eccsize = chip->ecc.size; -- int eccbytes = chip->ecc.bytes; -- int eccsteps = chip->ecc.steps; -+ int i, eccsize = chip->cur_ecc->size; -+ int eccbytes = chip->cur_ecc->bytes; -+ int eccsteps = chip->cur_ecc->steps; - uint8_t *p = buf; - uint8_t *ecc_calc = chip->buffers->ecccalc; - uint8_t *ecc_code = chip->buffers->ecccode; -- uint32_t *eccpos = chip->ecc.layout->eccpos; -+ uint32_t *eccpos = chip->cur_ecc->layout->eccpos; - unsigned int max_bitflips = 0; - -- chip->ecc.read_page_raw(mtd, chip, buf, 1, page); -+ chip->cur_ecc->read_page_raw(mtd, chip, buf, 1, page); - - for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) -- chip->ecc.calculate(mtd, p, &ecc_calc[i]); -+ chip->cur_ecc->calculate(mtd, p, &ecc_calc[i]); - -- for (i = 0; i < chip->ecc.total; i++) -+ for (i = 0; i < chip->cur_ecc->total; i++) - ecc_code[i] = chip->oob_poi[eccpos[i]]; - -- eccsteps = chip->ecc.steps; -+ eccsteps = chip->cur_ecc->steps; - p = buf; - - for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { - int stat; - -- stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); -+ stat = chip->cur_ecc->correct(mtd, p, &ecc_code[i], -+ &ecc_calc[i]); - if (stat < 0) { - mtd->ecc_stats.failed++; - } else { -@@ -1223,7 +1224,7 @@ static int nand_read_subpage(struct mtd_ - int page) - { - int start_step, end_step, num_steps; -- uint32_t *eccpos = chip->ecc.layout->eccpos; -+ uint32_t *eccpos = chip->cur_ecc->layout->eccpos; - uint8_t *p; - int data_col_addr, i, gaps = 0; - int datafrag_len, eccfrag_len, aligned_len, aligned_pos; -@@ -1232,16 +1233,16 @@ static int nand_read_subpage(struct mtd_ - unsigned int max_bitflips = 0; - - /* Column address within the page aligned to ECC size (256bytes) */ -- start_step = data_offs / chip->ecc.size; -- end_step = (data_offs + readlen - 1) / chip->ecc.size; -+ start_step = data_offs / chip->cur_ecc->size; -+ end_step = (data_offs + readlen - 1) / chip->cur_ecc->size; - num_steps = end_step - start_step + 1; -- index = start_step * chip->ecc.bytes; -+ index = start_step * chip->cur_ecc->bytes; - - /* Data size aligned to ECC ecc.size */ -- datafrag_len = num_steps * chip->ecc.size; -- eccfrag_len = num_steps * chip->ecc.bytes; -+ datafrag_len = num_steps * chip->cur_ecc->size; -+ eccfrag_len = num_steps * chip->cur_ecc->bytes; - -- data_col_addr = start_step * chip->ecc.size; -+ data_col_addr = start_step * chip->cur_ecc->size; - /* If we read not a page aligned data */ - if (data_col_addr != 0) - chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1); -@@ -1250,8 +1251,9 @@ static int nand_read_subpage(struct mtd_ - chip->read_buf(mtd, p, datafrag_len); - - /* Calculate ECC */ -- for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) -- chip->ecc.calculate(mtd, p, &chip->buffers->ecccalc[i]); -+ for (i = 0; i < eccfrag_len; -+ i += chip->cur_ecc->bytes, p += chip->cur_ecc->size) -+ chip->cur_ecc->calculate(mtd, p, &chip->buffers->ecccalc[i]); - - /* - * The performance is faster if we position offsets according to -@@ -1275,7 +1277,8 @@ static int nand_read_subpage(struct mtd_ - aligned_len = eccfrag_len; - if (eccpos[index] & (busw - 1)) - aligned_len++; -- if (eccpos[index + (num_steps * chip->ecc.bytes)] & (busw - 1)) -+ if (eccpos[index + (num_steps * chip->cur_ecc->bytes)] & -+ (busw - 1)) - aligned_len++; - - chip->cmdfunc(mtd, NAND_CMD_RNDOUT, -@@ -1287,11 +1290,13 @@ static int nand_read_subpage(struct mtd_ - chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + index]]; - - p = bufpoi + data_col_addr; -- for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) { -+ for (i = 0; i < eccfrag_len; -+ i += chip->cur_ecc->bytes, p += chip->cur_ecc->size) { - int stat; - -- stat = chip->ecc.correct(mtd, p, -- &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]); -+ stat = chip->cur_ecc->correct(mtd, p, -+ &chip->buffers->ecccode[i], -+ &chip->buffers->ecccalc[i]); - if (stat < 0) { - mtd->ecc_stats.failed++; - } else { -@@ -1315,32 +1320,33 @@ static int nand_read_subpage(struct mtd_ - static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int oob_required, int page) - { -- int i, eccsize = chip->ecc.size; -- int eccbytes = chip->ecc.bytes; -- int eccsteps = chip->ecc.steps; -+ int i, eccsize = chip->cur_ecc->size; -+ int eccbytes = chip->cur_ecc->bytes; -+ int eccsteps = chip->cur_ecc->steps; - uint8_t *p = buf; - uint8_t *ecc_calc = chip->buffers->ecccalc; - uint8_t *ecc_code = chip->buffers->ecccode; -- uint32_t *eccpos = chip->ecc.layout->eccpos; -+ uint32_t *eccpos = chip->cur_ecc->layout->eccpos; - unsigned int max_bitflips = 0; - - for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { -- chip->ecc.hwctl(mtd, NAND_ECC_READ); -+ chip->cur_ecc->hwctl(mtd, NAND_ECC_READ); - chip->read_buf(mtd, p, eccsize); -- chip->ecc.calculate(mtd, p, &ecc_calc[i]); -+ chip->cur_ecc->calculate(mtd, p, &ecc_calc[i]); - } - chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); - -- for (i = 0; i < chip->ecc.total; i++) -+ for (i = 0; i < chip->cur_ecc->total; i++) - ecc_code[i] = chip->oob_poi[eccpos[i]]; - -- eccsteps = chip->ecc.steps; -+ eccsteps = chip->cur_ecc->steps; - p = buf; - - for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { - int stat; - -- stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); -+ stat = chip->cur_ecc->correct(mtd, p, &ecc_code[i], -+ &ecc_calc[i]); - if (stat < 0) { - mtd->ecc_stats.failed++; - } else { -@@ -1368,12 +1374,12 @@ static int nand_read_page_hwecc(struct m - static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd, - struct nand_chip *chip, uint8_t *buf, int oob_required, int page) - { -- int i, eccsize = chip->ecc.size; -- int eccbytes = chip->ecc.bytes; -- int eccsteps = chip->ecc.steps; -+ int i, eccsize = chip->cur_ecc->size; -+ int eccbytes = chip->cur_ecc->bytes; -+ int eccsteps = chip->cur_ecc->steps; - uint8_t *p = buf; - uint8_t *ecc_code = chip->buffers->ecccode; -- uint32_t *eccpos = chip->ecc.layout->eccpos; -+ uint32_t *eccpos = chip->cur_ecc->layout->eccpos; - uint8_t *ecc_calc = chip->buffers->ecccalc; - unsigned int max_bitflips = 0; - -@@ -1382,17 +1388,17 @@ static int nand_read_page_hwecc_oob_firs - chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); - chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); - -- for (i = 0; i < chip->ecc.total; i++) -+ for (i = 0; i < chip->cur_ecc->total; i++) - ecc_code[i] = chip->oob_poi[eccpos[i]]; - - for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { - int stat; - -- chip->ecc.hwctl(mtd, NAND_ECC_READ); -+ chip->cur_ecc->hwctl(mtd, NAND_ECC_READ); - chip->read_buf(mtd, p, eccsize); -- chip->ecc.calculate(mtd, p, &ecc_calc[i]); -+ chip->cur_ecc->calculate(mtd, p, &ecc_calc[i]); - -- stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL); -+ stat = chip->cur_ecc->correct(mtd, p, &ecc_code[i], NULL); - if (stat < 0) { - mtd->ecc_stats.failed++; - } else { -@@ -1417,9 +1423,9 @@ static int nand_read_page_hwecc_oob_firs - static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int oob_required, int page) - { -- int i, eccsize = chip->ecc.size; -- int eccbytes = chip->ecc.bytes; -- int eccsteps = chip->ecc.steps; -+ int i, eccsize = chip->cur_ecc->size; -+ int eccbytes = chip->cur_ecc->bytes; -+ int eccsteps = chip->cur_ecc->steps; - uint8_t *p = buf; - uint8_t *oob = chip->oob_poi; - unsigned int max_bitflips = 0; -@@ -1427,17 +1433,17 @@ static int nand_read_page_syndrome(struc - for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { - int stat; - -- chip->ecc.hwctl(mtd, NAND_ECC_READ); -+ chip->cur_ecc->hwctl(mtd, NAND_ECC_READ); - chip->read_buf(mtd, p, eccsize); - -- if (chip->ecc.prepad) { -- chip->read_buf(mtd, oob, chip->ecc.prepad); -- oob += chip->ecc.prepad; -+ if (chip->cur_ecc->prepad) { -+ chip->read_buf(mtd, oob, chip->cur_ecc->prepad); -+ oob += chip->cur_ecc->prepad; - } - -- chip->ecc.hwctl(mtd, NAND_ECC_READSYN); -+ chip->cur_ecc->hwctl(mtd, NAND_ECC_READSYN); - chip->read_buf(mtd, oob, eccbytes); -- stat = chip->ecc.correct(mtd, p, oob, NULL); -+ stat = chip->cur_ecc->correct(mtd, p, oob, NULL); - - if (stat < 0) { - mtd->ecc_stats.failed++; -@@ -1448,9 +1454,9 @@ static int nand_read_page_syndrome(struc - - oob += eccbytes; - -- if (chip->ecc.postpad) { -- chip->read_buf(mtd, oob, chip->ecc.postpad); -- oob += chip->ecc.postpad; -+ if (chip->cur_ecc->postpad) { -+ chip->read_buf(mtd, oob, chip->cur_ecc->postpad); -+ oob += chip->cur_ecc->postpad; - } - } - -@@ -1480,7 +1486,7 @@ static uint8_t *nand_transfer_oob(struct - return oob + len; - - case MTD_OPS_AUTO_OOB: { -- struct nand_oobfree *free = chip->ecc.layout->oobfree; -+ struct nand_oobfree *free = chip->cur_ecc->layout->oobfree; - uint32_t boffs = 0, roffs = ops->ooboffs; - size_t bytes = 0; - -@@ -1600,17 +1606,21 @@ read_retry: - * the read methods return max bitflips per ecc step. - */ - if (unlikely(ops->mode == MTD_OPS_RAW)) -- ret = chip->ecc.read_page_raw(mtd, chip, bufpoi, -- oob_required, -- page); -+ ret = chip->cur_ecc->read_page_raw(mtd, chip, -+ bufpoi, -+ oob_required, -+ page); - else if (!aligned && NAND_HAS_SUBPAGE_READ(chip) && - !oob) -- ret = chip->ecc.read_subpage(mtd, chip, -- col, bytes, bufpoi, -- page); -+ ret = chip->cur_ecc->read_subpage(mtd, chip, -+ col, bytes, -+ bufpoi, -+ page); - else -- ret = chip->ecc.read_page(mtd, chip, bufpoi, -- oob_required, page); -+ ret = chip->cur_ecc->read_page(mtd, chip, -+ bufpoi, -+ oob_required, -+ page); - if (ret < 0) { - if (use_bufpoi) - /* Invalidate page cache */ -@@ -1746,6 +1756,39 @@ static int nand_read(struct mtd_info *mt - } - - /** -+ * nand_part_read - [MTD Interface] MTD compatibility function for nand_do_read_ecc -+ * @mtd: MTD device structure -+ * @from: offset to read from -+ * @len: number of bytes to read -+ * @retlen: pointer to variable to store the number of read bytes -+ * @buf: the databuffer to put data -+ * -+ * Get hold of the chip and call nand_do_read. -+ */ -+static int nand_part_read(struct mtd_info *mtd, loff_t from, size_t len, -+ size_t *retlen, uint8_t *buf) -+{ -+ struct nand_chip *chip = mtd->priv; -+ struct nand_part *part = to_nand_part(mtd); -+ struct mtd_oob_ops ops; -+ int ret; -+ -+ from += part->offset; -+ nand_get_device(part->master, FL_READING); -+ if (part->ecc) -+ chip->cur_ecc = part->ecc; -+ ops.len = len; -+ ops.datbuf = buf; -+ ops.oobbuf = NULL; -+ ops.mode = MTD_OPS_PLACE_OOB; -+ ret = nand_do_read_ops(part->master, from, &ops); -+ *retlen = ops.retlen; -+ chip->cur_ecc = &chip->ecc; -+ nand_release_device(part->master); -+ return ret; -+} -+ -+/** - * nand_read_oob_std - [REPLACEABLE] the most common OOB data read function - * @mtd: mtd info structure - * @chip: nand chip info structure -@@ -1770,13 +1813,14 @@ static int nand_read_oob_syndrome(struct - int page) - { - int length = mtd->oobsize; -- int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad; -- int eccsize = chip->ecc.size; -+ int chunk = chip->cur_ecc->bytes + chip->cur_ecc->prepad + -+ chip->cur_ecc->postpad; -+ int eccsize = chip->cur_ecc->size; - uint8_t *bufpoi = chip->oob_poi; - int i, toread, sndrnd = 0, pos; - -- chip->cmdfunc(mtd, NAND_CMD_READ0, chip->ecc.size, page); -- for (i = 0; i < chip->ecc.steps; i++) { -+ chip->cmdfunc(mtd, NAND_CMD_READ0, chip->cur_ecc->size, page); -+ for (i = 0; i < chip->cur_ecc->steps; i++) { - if (sndrnd) { - pos = eccsize + i * (eccsize + chunk); - if (mtd->writesize > 512) -@@ -1829,9 +1873,10 @@ static int nand_write_oob_std(struct mtd - static int nand_write_oob_syndrome(struct mtd_info *mtd, - struct nand_chip *chip, int page) - { -- int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad; -- int eccsize = chip->ecc.size, length = mtd->oobsize; -- int i, len, pos, status = 0, sndcmd = 0, steps = chip->ecc.steps; -+ int chunk = chip->cur_ecc->bytes + chip->cur_ecc->prepad + -+ chip->cur_ecc->postpad; -+ int eccsize = chip->cur_ecc->size, length = mtd->oobsize; -+ int i, len, pos, status = 0, sndcmd = 0, steps = chip->cur_ecc->steps; - const uint8_t *bufpoi = chip->oob_poi; - - /* -@@ -1839,7 +1884,7 @@ static int nand_write_oob_syndrome(struc - * or - * data-pad-ecc-pad-data-pad .... ecc-pad-oob - */ -- if (!chip->ecc.prepad && !chip->ecc.postpad) { -+ if (!chip->cur_ecc->prepad && !chip->cur_ecc->postpad) { - pos = steps * (eccsize + chunk); - steps = 0; - } else -@@ -1903,7 +1948,7 @@ static int nand_do_read_oob(struct mtd_i - stats = mtd->ecc_stats; - - if (ops->mode == MTD_OPS_AUTO_OOB) -- len = chip->ecc.layout->oobavail; -+ len = chip->cur_ecc->layout->oobavail; - else - len = mtd->oobsize; - -@@ -1931,9 +1976,9 @@ static int nand_do_read_oob(struct mtd_i - - while (1) { - if (ops->mode == MTD_OPS_RAW) -- ret = chip->ecc.read_oob_raw(mtd, chip, page); -+ ret = chip->cur_ecc->read_oob_raw(mtd, chip, page); - else -- ret = chip->ecc.read_oob(mtd, chip, page); -+ ret = chip->cur_ecc->read_oob(mtd, chip, page); - - if (ret < 0) - break; -@@ -2021,6 +2066,56 @@ out: - return ret; - } - -+/** -+ * nand_part_read_oob - [MTD Interface] NAND read data and/or out-of-band -+ * @mtd: MTD device structure -+ * @from: offset to read from -+ * @ops: oob operation description structure -+ * -+ * NAND read data and/or out-of-band data. -+ */ -+static int nand_part_read_oob(struct mtd_info *mtd, loff_t from, -+ struct mtd_oob_ops *ops) -+{ -+ struct nand_chip *chip = mtd->priv; -+ struct nand_part *part = to_nand_part(mtd); -+ int ret = -ENOTSUPP; -+ -+ ops->retlen = 0; -+ -+ /* Do not allow reads past end of device */ -+ if (ops->datbuf && (from + ops->len) > mtd->size) { -+ pr_debug("%s: attempt to read beyond end of device\n", -+ __func__); -+ return -EINVAL; -+ } -+ -+ from += part->offset; -+ nand_get_device(part->master, FL_READING); -+ if (part->ecc) -+ chip->cur_ecc = part->ecc; -+ -+ switch (ops->mode) { -+ case MTD_OPS_PLACE_OOB: -+ case MTD_OPS_AUTO_OOB: -+ case MTD_OPS_RAW: -+ break; -+ -+ default: -+ goto out; -+ } -+ -+ if (!ops->datbuf) -+ ret = nand_do_read_oob(part->master, from, ops); -+ else -+ ret = nand_do_read_ops(part->master, from, ops); -+ -+out: -+ chip->cur_ecc = &chip->ecc; -+ nand_release_device(part->master); -+ return ret; -+} -+ - - /** - * nand_write_page_raw - [INTERN] raw page write function -@@ -2054,26 +2149,26 @@ static int nand_write_page_raw_syndrome( - struct nand_chip *chip, - const uint8_t *buf, int oob_required) - { -- int eccsize = chip->ecc.size; -- int eccbytes = chip->ecc.bytes; -+ int eccsize = chip->cur_ecc->size; -+ int eccbytes = chip->cur_ecc->bytes; - uint8_t *oob = chip->oob_poi; - int steps, size; - -- for (steps = chip->ecc.steps; steps > 0; steps--) { -+ for (steps = chip->cur_ecc->steps; steps > 0; steps--) { - chip->write_buf(mtd, buf, eccsize); - buf += eccsize; - -- if (chip->ecc.prepad) { -- chip->write_buf(mtd, oob, chip->ecc.prepad); -- oob += chip->ecc.prepad; -+ if (chip->cur_ecc->prepad) { -+ chip->write_buf(mtd, oob, chip->cur_ecc->prepad); -+ oob += chip->cur_ecc->prepad; - } - - chip->write_buf(mtd, oob, eccbytes); - oob += eccbytes; - -- if (chip->ecc.postpad) { -- chip->write_buf(mtd, oob, chip->ecc.postpad); -- oob += chip->ecc.postpad; -+ if (chip->cur_ecc->postpad) { -+ chip->write_buf(mtd, oob, chip->cur_ecc->postpad); -+ oob += chip->cur_ecc->postpad; - } - } - -@@ -2093,21 +2188,21 @@ static int nand_write_page_raw_syndrome( - static int nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf, int oob_required) - { -- int i, eccsize = chip->ecc.size; -- int eccbytes = chip->ecc.bytes; -- int eccsteps = chip->ecc.steps; -+ int i, eccsize = chip->cur_ecc->size; -+ int eccbytes = chip->cur_ecc->bytes; -+ int eccsteps = chip->cur_ecc->steps; - uint8_t *ecc_calc = chip->buffers->ecccalc; - const uint8_t *p = buf; -- uint32_t *eccpos = chip->ecc.layout->eccpos; -+ uint32_t *eccpos = chip->cur_ecc->layout->eccpos; - - /* Software ECC calculation */ - for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) -- chip->ecc.calculate(mtd, p, &ecc_calc[i]); -+ chip->cur_ecc->calculate(mtd, p, &ecc_calc[i]); - -- for (i = 0; i < chip->ecc.total; i++) -+ for (i = 0; i < chip->cur_ecc->total; i++) - chip->oob_poi[eccpos[i]] = ecc_calc[i]; - -- return chip->ecc.write_page_raw(mtd, chip, buf, 1); -+ return chip->cur_ecc->write_page_raw(mtd, chip, buf, 1); - } - - /** -@@ -2120,20 +2215,20 @@ static int nand_write_page_swecc(struct - static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf, int oob_required) - { -- int i, eccsize = chip->ecc.size; -- int eccbytes = chip->ecc.bytes; -- int eccsteps = chip->ecc.steps; -+ int i, eccsize = chip->cur_ecc->size; -+ int eccbytes = chip->cur_ecc->bytes; -+ int eccsteps = chip->cur_ecc->steps; - uint8_t *ecc_calc = chip->buffers->ecccalc; - const uint8_t *p = buf; -- uint32_t *eccpos = chip->ecc.layout->eccpos; -+ uint32_t *eccpos = chip->cur_ecc->layout->eccpos; - - for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { -- chip->ecc.hwctl(mtd, NAND_ECC_WRITE); -+ chip->cur_ecc->hwctl(mtd, NAND_ECC_WRITE); - chip->write_buf(mtd, p, eccsize); -- chip->ecc.calculate(mtd, p, &ecc_calc[i]); -+ chip->cur_ecc->calculate(mtd, p, &ecc_calc[i]); - } - -- for (i = 0; i < chip->ecc.total; i++) -+ for (i = 0; i < chip->cur_ecc->total; i++) - chip->oob_poi[eccpos[i]] = ecc_calc[i]; - - chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); -@@ -2158,10 +2253,10 @@ static int nand_write_subpage_hwecc(stru - { - uint8_t *oob_buf = chip->oob_poi; - uint8_t *ecc_calc = chip->buffers->ecccalc; -- int ecc_size = chip->ecc.size; -- int ecc_bytes = chip->ecc.bytes; -- int ecc_steps = chip->ecc.steps; -- uint32_t *eccpos = chip->ecc.layout->eccpos; -+ int ecc_size = chip->cur_ecc->size; -+ int ecc_bytes = chip->cur_ecc->bytes; -+ int ecc_steps = chip->cur_ecc->steps; -+ uint32_t *eccpos = chip->cur_ecc->layout->eccpos; - uint32_t start_step = offset / ecc_size; - uint32_t end_step = (offset + data_len - 1) / ecc_size; - int oob_bytes = mtd->oobsize / ecc_steps; -@@ -2169,7 +2264,7 @@ static int nand_write_subpage_hwecc(stru - - for (step = 0; step < ecc_steps; step++) { - /* configure controller for WRITE access */ -- chip->ecc.hwctl(mtd, NAND_ECC_WRITE); -+ chip->cur_ecc->hwctl(mtd, NAND_ECC_WRITE); - - /* write data (untouched subpages already masked by 0xFF) */ - chip->write_buf(mtd, buf, ecc_size); -@@ -2178,7 +2273,7 @@ static int nand_write_subpage_hwecc(stru - if ((step < start_step) || (step > end_step)) - memset(ecc_calc, 0xff, ecc_bytes); - else -- chip->ecc.calculate(mtd, buf, ecc_calc); -+ chip->cur_ecc->calculate(mtd, buf, ecc_calc); - - /* mask OOB of un-touched subpages by padding 0xFF */ - /* if oob_required, preserve OOB metadata of written subpage */ -@@ -2193,7 +2288,7 @@ static int nand_write_subpage_hwecc(stru - /* copy calculated ECC for whole page to chip->buffer->oob */ - /* this include masked-value(0xFF) for unwritten subpages */ - ecc_calc = chip->buffers->ecccalc; -- for (i = 0; i < chip->ecc.total; i++) -+ for (i = 0; i < chip->cur_ecc->total; i++) - chip->oob_poi[eccpos[i]] = ecc_calc[i]; - - /* write OOB buffer to NAND device */ -@@ -2217,29 +2312,29 @@ static int nand_write_page_syndrome(stru - struct nand_chip *chip, - const uint8_t *buf, int oob_required) - { -- int i, eccsize = chip->ecc.size; -- int eccbytes = chip->ecc.bytes; -- int eccsteps = chip->ecc.steps; -+ int i, eccsize = chip->cur_ecc->size; -+ int eccbytes = chip->cur_ecc->bytes; -+ int eccsteps = chip->cur_ecc->steps; - const uint8_t *p = buf; - uint8_t *oob = chip->oob_poi; - - for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { - -- chip->ecc.hwctl(mtd, NAND_ECC_WRITE); -+ chip->cur_ecc->hwctl(mtd, NAND_ECC_WRITE); - chip->write_buf(mtd, p, eccsize); - -- if (chip->ecc.prepad) { -- chip->write_buf(mtd, oob, chip->ecc.prepad); -- oob += chip->ecc.prepad; -+ if (chip->cur_ecc->prepad) { -+ chip->write_buf(mtd, oob, chip->cur_ecc->prepad); -+ oob += chip->cur_ecc->prepad; - } - -- chip->ecc.calculate(mtd, p, oob); -+ chip->cur_ecc->calculate(mtd, p, oob); - chip->write_buf(mtd, oob, eccbytes); - oob += eccbytes; - -- if (chip->ecc.postpad) { -- chip->write_buf(mtd, oob, chip->ecc.postpad); -- oob += chip->ecc.postpad; -+ if (chip->cur_ecc->postpad) { -+ chip->write_buf(mtd, oob, chip->cur_ecc->postpad); -+ oob += chip->cur_ecc->postpad; - } - } - -@@ -2270,7 +2365,7 @@ static int nand_write_page(struct mtd_in - int status, subpage; - - if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && -- chip->ecc.write_subpage) -+ chip->cur_ecc->write_subpage) - subpage = offset || (data_len < mtd->writesize); - else - subpage = 0; -@@ -2278,13 +2373,15 @@ static int nand_write_page(struct mtd_in - chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); - - if (unlikely(raw)) -- status = chip->ecc.write_page_raw(mtd, chip, buf, -- oob_required); -+ status = chip->cur_ecc->write_page_raw(mtd, chip, buf, -+ oob_required); - else if (subpage) -- status = chip->ecc.write_subpage(mtd, chip, offset, data_len, -- buf, oob_required); -+ status = chip->cur_ecc->write_subpage(mtd, chip, offset, -+ data_len, buf, -+ oob_required); - else -- status = chip->ecc.write_page(mtd, chip, buf, oob_required); -+ status = chip->cur_ecc->write_page(mtd, chip, buf, -+ oob_required); - - if (status < 0) - return status; -@@ -2343,7 +2440,7 @@ static uint8_t *nand_fill_oob(struct mtd - return oob + len; - - case MTD_OPS_AUTO_OOB: { -- struct nand_oobfree *free = chip->ecc.layout->oobfree; -+ struct nand_oobfree *free = chip->cur_ecc->layout->oobfree; - uint32_t boffs = 0, woffs = ops->ooboffs; - size_t bytes = 0; - -@@ -2539,6 +2636,46 @@ static int panic_nand_write(struct mtd_i - } - - /** -+ * panic_nand_part_write - [MTD Interface] NAND write with ECC -+ * @mtd: MTD device structure -+ * @to: offset to write to -+ * @len: number of bytes to write -+ * @retlen: pointer to variable to store the number of written bytes -+ * @buf: the data to write -+ * -+ * NAND write with ECC. Used when performing writes in interrupt context, this -+ * may for example be called by mtdoops when writing an oops while in panic. -+ */ -+static int panic_nand_part_write(struct mtd_info *mtd, loff_t to, size_t len, -+ size_t *retlen, const uint8_t *buf) -+{ -+ struct nand_chip *chip = mtd->priv; -+ struct nand_part *part = to_nand_part(mtd); -+ struct mtd_oob_ops ops; -+ int ret; -+ -+ to += part->offset; -+ /* Wait for the device to get ready */ -+ panic_nand_wait(part->master, chip, 400); -+ -+ /* Grab the device */ -+ panic_nand_get_device(chip, part->master, FL_WRITING); -+ if (part->ecc) -+ chip->cur_ecc = part->ecc; -+ -+ ops.len = len; -+ ops.datbuf = (uint8_t *)buf; -+ ops.oobbuf = NULL; -+ ops.mode = MTD_OPS_PLACE_OOB; -+ -+ ret = nand_do_write_ops(part->master, to, &ops); -+ -+ chip->cur_ecc = &chip->ecc; -+ *retlen = ops.retlen; -+ return ret; -+} -+ -+/** - * nand_write - [MTD Interface] NAND write with ECC - * @mtd: MTD device structure - * @to: offset to write to -@@ -2566,6 +2703,39 @@ static int nand_write(struct mtd_info *m - } - - /** -+ * nand_part_write - [MTD Interface] NAND write with ECC -+ * @mtd: MTD device structure -+ * @to: offset to write to -+ * @len: number of bytes to write -+ * @retlen: pointer to variable to store the number of written bytes -+ * @buf: the data to write -+ * -+ * NAND write with ECC. -+ */ -+static int nand_part_write(struct mtd_info *mtd, loff_t to, size_t len, -+ size_t *retlen, const uint8_t *buf) -+{ -+ struct nand_chip *chip = mtd->priv; -+ struct nand_part *part = to_nand_part(mtd); -+ struct mtd_oob_ops ops; -+ int ret; -+ -+ to += part->offset; -+ nand_get_device(part->master, FL_WRITING); -+ if (part->ecc) -+ chip->cur_ecc = part->ecc; -+ ops.len = len; -+ ops.datbuf = (uint8_t *)buf; -+ ops.oobbuf = NULL; -+ ops.mode = MTD_OPS_PLACE_OOB; -+ ret = nand_do_write_ops(part->master, to, &ops); -+ *retlen = ops.retlen; -+ chip->cur_ecc = &chip->ecc; -+ nand_release_device(part->master); -+ return ret; -+} -+ -+/** - * nand_do_write_oob - [MTD Interface] NAND write out-of-band - * @mtd: MTD device structure - * @to: offset to write to -@@ -2583,7 +2753,7 @@ static int nand_do_write_oob(struct mtd_ - __func__, (unsigned int)to, (int)ops->ooblen); - - if (ops->mode == MTD_OPS_AUTO_OOB) -- len = chip->ecc.layout->oobavail; -+ len = chip->cur_ecc->layout->oobavail; - else - len = mtd->oobsize; - -@@ -2637,9 +2807,11 @@ static int nand_do_write_oob(struct mtd_ - nand_fill_oob(mtd, ops->oobbuf, ops->ooblen, ops); - - if (ops->mode == MTD_OPS_RAW) -- status = chip->ecc.write_oob_raw(mtd, chip, page & chip->pagemask); -+ status = chip->cur_ecc->write_oob_raw(mtd, chip, -+ page & chip->pagemask); - else -- status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask); -+ status = chip->cur_ecc->write_oob(mtd, chip, -+ page & chip->pagemask); - - chip->select_chip(mtd, -1); - -@@ -2694,6 +2866,54 @@ out: - } - - /** -+ * nand_write_oob - [MTD Interface] NAND write data and/or out-of-band -+ * @mtd: MTD device structure -+ * @to: offset to write to -+ * @ops: oob operation description structure -+ */ -+static int nand_part_write_oob(struct mtd_info *mtd, loff_t to, -+ struct mtd_oob_ops *ops) -+{ -+ struct nand_chip *chip = mtd->priv; -+ struct nand_part *part = to_nand_part(mtd); -+ int ret = -ENOTSUPP; -+ -+ ops->retlen = 0; -+ -+ /* Do not allow writes past end of device */ -+ if (ops->datbuf && (to + ops->len) > mtd->size) { -+ pr_debug("%s: attempt to write beyond end of device\n", -+ __func__); -+ return -EINVAL; -+ } -+ -+ to += part->offset; -+ nand_get_device(part->master, FL_WRITING); -+ if (part->ecc) -+ chip->cur_ecc = part->ecc; -+ -+ switch (ops->mode) { -+ case MTD_OPS_PLACE_OOB: -+ case MTD_OPS_AUTO_OOB: -+ case MTD_OPS_RAW: -+ break; -+ -+ default: -+ goto out; -+ } -+ -+ if (!ops->datbuf) -+ ret = nand_do_write_oob(part->master, to, ops); -+ else -+ ret = nand_do_write_ops(part->master, to, ops); -+ -+out: -+ chip->cur_ecc = &chip->ecc; -+ nand_release_device(part->master); -+ return ret; -+} -+ -+/** - * single_erase - [GENERIC] NAND standard block erase command function - * @mtd: MTD device structure - * @page: the page address of the block which will be erased -@@ -2723,6 +2943,29 @@ static int nand_erase(struct mtd_info *m - } - - /** -+ * nand_part_erase - [MTD Interface] erase partition block(s) -+ * @mtd: MTD device structure -+ * @instr: erase instruction -+ * -+ * Erase one ore more blocks. -+ */ -+static int nand_part_erase(struct mtd_info *mtd, struct erase_info *instr) -+{ -+ struct nand_part *part = to_nand_part(mtd); -+ int ret; -+ -+ instr->addr += part->offset; -+ ret = nand_erase_nand(part->master, instr, 0); -+ if (ret) { -+ if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN) -+ instr->fail_addr -= part->offset; -+ instr->addr -= part->offset; -+ } -+ -+ return ret; -+} -+ -+/** - * nand_erase_nand - [INTERN] erase block(s) - * @mtd: MTD device structure - * @instr: erase instruction -@@ -2864,6 +3107,18 @@ static int nand_block_isbad(struct mtd_i - } - - /** -+ * nand_part_block_isbad - [MTD Interface] Check if block at offset is bad -+ * @mtd: MTD device structure -+ * @offs: offset relative to mtd start -+ */ -+static int nand_part_block_isbad(struct mtd_info *mtd, loff_t offs) -+{ -+ struct nand_part *part = to_nand_part(mtd); -+ -+ return nand_block_checkbad(part->master, part->offset + offs, 1, 0); -+} -+ -+/** - * nand_block_markbad - [MTD Interface] Mark block at the given offset as bad - * @mtd: MTD device structure - * @ofs: offset relative to mtd start -@@ -2884,6 +3139,33 @@ static int nand_block_markbad(struct mtd - } - - /** -+ * nand_part_block_markbad - [MTD Interface] Mark block at the given offset as -+ * bad -+ * @mtd: MTD device structure -+ * @ofs: offset relative to mtd start -+ */ -+static int nand_part_block_markbad(struct mtd_info *mtd, loff_t ofs) -+{ -+ struct nand_part *part = to_nand_part(mtd); -+ int ret; -+ -+ ofs += part->offset; -+ ret = nand_block_isbad(part->master, ofs); -+ if (ret) { -+ /* If it was bad already, return success and do nothing */ -+ if (ret > 0) -+ return 0; -+ return ret; -+ } -+ -+ ret = nand_block_markbad_lowlevel(part->master, ofs); -+ if (!ret) -+ mtd->ecc_stats.badblocks++; -+ -+ return ret; -+} -+ -+/** - * nand_onfi_set_features- [REPLACEABLE] set features for ONFI nand - * @mtd: MTD device structure - * @chip: nand chip info structure -@@ -4099,6 +4381,169 @@ static int nand_ecc_ctrl_init(struct mtd - } - - /** -+ * nand_add_partition - [NAND Interface] Add a NAND partition to a NAND device -+ * @master: MTD device structure representing the NAND device -+ * @part: NAND partition to add to the NAND device -+ * -+ * Adds a NAND partition to a NAND device. -+ * The NAND partition cannot overlap with another existing partition. -+ * -+ * Returns zero in case of success and a negative error code in case of failure. -+ */ -+int nand_add_partition(struct mtd_info *master, struct nand_part *part) -+{ -+ struct nand_chip *chip = master->priv; -+ struct mtd_info *mtd = &part->mtd; -+ struct nand_ecc_ctrl *ecc = part->ecc; -+ struct nand_part *pos; -+ bool inserted = false; -+ int ret; -+ -+ /* set up the MTD object for this partition */ -+ mtd->type = master->type; -+ mtd->flags = master->flags & ~mtd->flags; -+ mtd->writesize = master->writesize; -+ mtd->writebufsize = master->writebufsize; -+ mtd->oobsize = master->oobsize; -+ mtd->oobavail = master->oobavail; -+ mtd->subpage_sft = master->subpage_sft; -+ mtd->erasesize = master->erasesize; -+ -+ mtd->priv = chip; -+ mtd->owner = master->owner; -+ mtd->backing_dev_info = master->backing_dev_info; -+ -+ mtd->dev.parent = master->dev.parent; -+ -+ if (ecc) { -+ ret = nand_ecc_ctrl_init(mtd, ecc); -+ if (ret) -+ return ret; -+ } else { -+ ecc = &chip->ecc; -+ } -+ -+ mtd->_erase = nand_part_erase; -+ mtd->_point = NULL; -+ mtd->_unpoint = NULL; -+ mtd->_read = nand_part_read; -+ mtd->_write = nand_part_write; -+ mtd->_panic_write = panic_nand_part_write; -+ mtd->_read_oob = nand_part_read_oob; -+ mtd->_write_oob = nand_part_write_oob; -+ mtd->_sync = nand_sync; -+ mtd->_lock = NULL; -+ mtd->_unlock = NULL; -+ mtd->_suspend = nand_suspend; -+ mtd->_resume = nand_resume; -+ mtd->_block_isbad = nand_part_block_isbad; -+ mtd->_block_markbad = nand_part_block_markbad; -+ -+ /* propagate ecc info to mtd_info */ -+ mtd->ecclayout = ecc->layout; -+ mtd->ecc_strength = ecc->strength; -+ mtd->ecc_step_size = ecc->size; -+ /* -+ * Initialize bitflip_threshold to its default prior scan_bbt() call. -+ * scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be -+ * properly set. -+ */ -+ if (!mtd->bitflip_threshold) -+ mtd->bitflip_threshold = mtd->ecc_strength; -+ -+ part->master = master; -+ -+ mutex_lock(&chip->part_lock); -+ list_for_each_entry(pos, &chip->partitions, node) { -+ if (part->offset >= pos->offset + pos->mtd.size) { -+ continue; -+ } else if (part->offset + mtd->size > pos->offset) { -+ ret = -EINVAL; -+ goto out; -+ } -+ -+ list_add(&part->node, pos->node.prev); -+ inserted = true; -+ break; -+ } -+ -+ if (!inserted) -+ list_add_tail(&part->node, &chip->partitions); -+ -+ ret = mtd_device_register(mtd, NULL, 0); -+ if (ret) { -+ list_del(&part->node); -+ goto out; -+ } -+ -+ if (master->_block_isbad) { -+ uint64_t offs = 0; -+ -+ while (offs < mtd->size) { -+ if (mtd_block_isreserved(master, offs + part->offset)) -+ mtd->ecc_stats.bbtblocks++; -+ else if (mtd_block_isbad(master, offs + part->offset)) -+ mtd->ecc_stats.badblocks++; -+ offs += mtd->erasesize; -+ } -+ } -+ -+out: -+ mutex_unlock(&chip->part_lock); -+ return ret; -+} -+EXPORT_SYMBOL(nand_add_partition); -+ -+/** -+ * nand_del_partition - [NAND Interface] Delete a NAND part from a NAND dev -+ * @part: NAND partition to delete -+ * -+ * Deletes a NAND partition from a NAND device. -+ */ -+void nand_del_partition(struct nand_part *part) -+{ -+ struct nand_chip *chip = part->mtd.priv; -+ -+ mutex_lock(&chip->part_lock); -+ mtd_device_unregister(&part->mtd); -+ list_del(&part->node); -+ mutex_unlock(&chip->part_lock); -+ -+ if (part->ecc && part->ecc->mode == NAND_ECC_SOFT_BCH) -+ nand_bch_free((struct nand_bch_control *)part->ecc->priv); -+ -+ if (part->release) -+ part->release(part); -+} -+EXPORT_SYMBOL(nand_del_partition); -+ -+/* -+ * NAND part release function. Used by nandpart_alloc as its release function. -+ */ -+static void nandpart_release(struct nand_part *part) -+{ -+ kfree(part); -+} -+ -+/** -+ * nandpart_alloc - [NAND Interface] Allocate a NAND part struct -+ * -+ * Allocate a NAND partition and assign the nandpart release function. -+ * This nand_part struct must be filled before passing it to the -+ * nand_add_partition function. -+ */ -+struct nand_part *nandpart_alloc(void) -+{ -+ struct nand_part *part = kzalloc(sizeof(*part), GFP_KERNEL); -+ if (!part) -+ return ERR_PTR(-ENOMEM); -+ part->release = nandpart_release; -+ -+ return part; -+} -+EXPORT_SYMBOL(nandpart_alloc); -+ -+/** - * nand_scan_tail - [NAND Interface] Scan for the NAND device - * @mtd: MTD device structure - * -@@ -4146,6 +4591,11 @@ int nand_scan_tail(struct mtd_info *mtd) - return ret; - } - -+ INIT_LIST_HEAD(&chip->partitions); -+ mutex_init(&chip->part_lock); -+ -+ chip->cur_ecc = &chip->ecc; -+ - /* Allow subpage writes up to ecc.steps. Not possible for MLC flash */ - if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) { - switch (ecc->steps) { ---- a/drivers/mtd/nand/nand_bch.c -+++ b/drivers/mtd/nand/nand_bch.c -@@ -53,14 +53,14 @@ int nand_bch_calculate_ecc(struct mtd_in - unsigned char *code) - { - const struct nand_chip *chip = mtd->priv; -- struct nand_bch_control *nbc = chip->ecc.priv; -+ struct nand_bch_control *nbc = chip->cur_ecc->priv; - unsigned int i; - -- memset(code, 0, chip->ecc.bytes); -- encode_bch(nbc->bch, buf, chip->ecc.size, code); -+ memset(code, 0, chip->cur_ecc->bytes); -+ encode_bch(nbc->bch, buf, chip->cur_ecc->size, code); - - /* apply mask so that an erased page is a valid codeword */ -- for (i = 0; i < chip->ecc.bytes; i++) -+ for (i = 0; i < chip->cur_ecc->bytes; i++) - code[i] ^= nbc->eccmask[i]; - - return 0; -@@ -80,15 +80,15 @@ int nand_bch_correct_data(struct mtd_inf - unsigned char *read_ecc, unsigned char *calc_ecc) - { - const struct nand_chip *chip = mtd->priv; -- struct nand_bch_control *nbc = chip->ecc.priv; -+ struct nand_bch_control *nbc = chip->cur_ecc->priv; - unsigned int *errloc = nbc->errloc; - int i, count; - -- count = decode_bch(nbc->bch, NULL, chip->ecc.size, read_ecc, calc_ecc, -- NULL, errloc); -+ count = decode_bch(nbc->bch, NULL, chip->cur_ecc->size, read_ecc, -+ calc_ecc, NULL, errloc); - if (count > 0) { - for (i = 0; i < count; i++) { -- if (errloc[i] < (chip->ecc.size*8)) -+ if (errloc[i] < (chip->cur_ecc->size*8)) - /* error is located in data, correct it */ - buf[errloc[i] >> 3] ^= (1 << (errloc[i] & 7)); - /* else error in ecc, no action needed */ ---- a/drivers/mtd/nand/nand_ecc.c -+++ b/drivers/mtd/nand/nand_ecc.c -@@ -424,7 +424,7 @@ int nand_calculate_ecc(struct mtd_info * - unsigned char *code) - { - __nand_calculate_ecc(buf, -- ((struct nand_chip *)mtd->priv)->ecc.size, code); -+ ((struct nand_chip *)mtd->priv)->cur_ecc->size, code); - - return 0; - } -@@ -524,7 +524,7 @@ int nand_correct_data(struct mtd_info *m - unsigned char *read_ecc, unsigned char *calc_ecc) - { - return __nand_correct_data(buf, read_ecc, calc_ecc, -- ((struct nand_chip *)mtd->priv)->ecc.size); -+ ((struct nand_chip *)mtd->priv)->cur_ecc->size); - } - EXPORT_SYMBOL(nand_correct_data); - ---- a/include/linux/mtd/nand.h -+++ b/include/linux/mtd/nand.h -@@ -708,6 +708,7 @@ struct nand_chip { - struct nand_hw_control *controller; - - struct nand_ecc_ctrl ecc; -+ struct nand_ecc_ctrl *cur_ecc; - struct nand_buffers *buffers; - struct nand_hw_control hwcontrol; - -@@ -717,9 +718,46 @@ struct nand_chip { - - struct nand_bbt_descr *badblock_pattern; - -+ struct list_head partitions; -+ struct mutex part_lock; -+ - void *priv; - }; - -+/** -+ * struct nand_part - NAND partition structure -+ * @node: list node used to attach the partition to its NAND dev -+ * @mtd: MTD partiton info -+ * @master: MTD device representing the NAND chip -+ * @offset: partition offset -+ * @ecc: partition specific ECC struct -+ * @release: function used to release this nand_part struct -+ * -+ * NAND partitions work as standard MTD partitions except it can override -+ * NAND chip ECC handling. -+ * This is particularly useful for SoCs that need specific ECC configs to boot -+ * from NAND while these ECC configs do not fit the NAND chip ECC requirements. -+ */ -+struct nand_part { -+ struct list_head node; -+ struct mtd_info mtd; -+ struct mtd_info *master; -+ uint64_t offset; -+ struct nand_ecc_ctrl *ecc; -+ void (*release)(struct nand_part *part); -+}; -+ -+static inline struct nand_part *to_nand_part(struct mtd_info *mtd) -+{ -+ return container_of(mtd, struct nand_part, mtd); -+} -+ -+int nand_add_partition(struct mtd_info *master, struct nand_part *part); -+ -+void nand_del_partition(struct nand_part *part); -+ -+struct nand_part *nandpart_alloc(void); -+ - /* - * NAND Flash Manufacturer ID Codes - */ diff --git a/target/linux/sunxi/patches-4.1/112-mtd-add-dt-nand-partition-parser.patch b/target/linux/sunxi/patches-4.1/112-mtd-add-dt-nand-partition-parser.patch deleted file mode 100644 index 76f0051..0000000 --- a/target/linux/sunxi/patches-4.1/112-mtd-add-dt-nand-partition-parser.patch +++ /dev/null @@ -1,152 +0,0 @@ -From 0460e9868fd82a3675db02f6ceb6edfd8501c194 Mon Sep 17 00:00:00 2001 -From: Boris BREZILLON <boris.brezillon@free-electrons.com> -Date: Mon, 28 Jul 2014 14:31:42 +0200 -Subject: [PATCH] mtd: nand: Add DT NAND partition parser - -Add a of_nandpart_parse function to help parsing NAND partitions from DT. -This function should be called from NAND controller drivers just after the -nand_scan_tail in place of mtd_device_parse_register. -The caller can specify a parser function to retrieve HW specific -informations from the DT. - -Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - drivers/mtd/nand/ofnandpart.c | 104 ++++++++++++++++++++++++++++++++++++++++++ - include/linux/mtd/nand.h | 17 +++++++ - 2 files changed, 121 insertions(+) - create mode 100644 drivers/mtd/nand/ofnandpart.c - ---- /dev/null -+++ b/drivers/mtd/nand/ofnandpart.c -@@ -0,0 +1,104 @@ -+/* -+ * NAND Flash partitions described by the OF (or flattened) device tree -+ * -+ * Copyright © 2014 Boris BREZILLON <b.brezillon.dev@gmail.com> -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/of.h> -+#include <linux/mtd/mtd.h> -+#include <linux/slab.h> -+#include <linux/mtd/nand.h> -+ -+static inline bool node_has_compatible(struct device_node *pp) -+{ -+ return of_get_property(pp, "compatible", NULL); -+} -+ -+int ofnandpart_parse(struct mtd_info *master, -+ const struct ofnandpart_data *data) -+{ -+ struct device_node *node; -+ const char *partname; -+ struct device_node *pp; -+ int i; -+ -+ if (!data) -+ return 0; -+ -+ node = data->node; -+ if (!node) -+ return 0; -+ -+ i = 0; -+ for_each_child_of_node(node, pp) { -+ const __be32 *reg; -+ int len; -+ int a_cells, s_cells; -+ uint64_t offset, size; -+ uint32_t mask_flags = 0; -+ struct nand_part *part; -+ -+ if (node_has_compatible(pp)) -+ continue; -+ -+ reg = of_get_property(pp, "reg", &len); -+ if (!reg) -+ continue; -+ -+ a_cells = of_n_addr_cells(pp); -+ s_cells = of_n_size_cells(pp); -+ offset = of_read_number(reg, a_cells); -+ size = of_read_number(reg + a_cells, s_cells); -+ -+ partname = of_get_property(pp, "label", &len); -+ if (!partname) -+ partname = of_get_property(pp, "name", &len); -+ -+ if (of_get_property(pp, "read-only", &len)) -+ mask_flags |= MTD_WRITEABLE; -+ -+ if (of_get_property(pp, "lock", &len)) -+ mask_flags |= MTD_POWERUP_LOCK; -+ -+ if (data->parse) -+ part = data->parse(data->priv, master, pp); -+ else -+ part = nandpart_alloc(); -+ -+ if (IS_ERR(part)) -+ continue; -+ -+ part->offset = offset; -+ part->master = master; -+ part->mtd.name = partname; -+ part->mtd.size = size; -+ part->mtd.flags = mask_flags; -+ -+ if (nand_add_partition(master, part)) { -+ if (part->release) -+ part->release(part); -+ continue; -+ } -+ -+ i++; -+ } -+ -+ if (!i) { -+ of_node_put(pp); -+ pr_err("No valid partition found on %s\n", node->full_name); -+ } -+ -+ return i; -+} -+EXPORT_SYMBOL(ofnandpart_parse); -+ -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION("Parser for NAND flash partitioning information in device tree"); -+MODULE_AUTHOR("Boris BREZILLON"); ---- a/include/linux/mtd/nand.h -+++ b/include/linux/mtd/nand.h -@@ -1014,6 +1014,23 @@ static inline int jedec_feature(struct n - : 0; - } - -+/** -+ * struct ofnandpart_data - struct used to retrieve NAND partitions from a DT -+ * node -+ * @parse: driver specific parser function -+ * @priv: driver private data -+ * @node: OF node containing NAND partitions -+ */ -+struct ofnandpart_data { -+ struct nand_part *(*parse)(void *priv, struct mtd_info *master, -+ struct device_node *pp); -+ void *priv; -+ struct device_node *node; -+}; -+ -+int ofnandpart_parse(struct mtd_info *master, -+ const struct ofnandpart_data *data); -+ - /* - * struct nand_sdr_timings - SDR NAND chip timings - * diff --git a/target/linux/sunxi/patches-4.1/113-mtd-nand-add-pst.patch b/target/linux/sunxi/patches-4.1/113-mtd-nand-add-pst.patch deleted file mode 100644 index 45b9679..0000000 --- a/target/linux/sunxi/patches-4.1/113-mtd-nand-add-pst.patch +++ /dev/null @@ -1,261 +0,0 @@ -From bec69bb8e85151729014d859106dcc3fe652b1d4 Mon Sep 17 00:00:00 2001 -From: Boris BREZILLON <boris.brezillon@free-electrons.com> -Date: Mon, 28 Jul 2014 14:45:40 +0200 -Subject: [PATCH] mtd: nand: Add page status table (pst) - -Page status table is an byte array storing pages status. -It defines 3 status: - - unknown: the page has not been read yet and we do not know its current - state - - empty: the page contains only FFs - - filled: the page has been filled with data - -Care must be taken: an empty page does not mean it can be written, because -it might have already been written with only FFs. - -These page status are useful to check wether the controller should try to -correct errors (using ECC) or a derandomize data (using a randomizer -block). - -Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - drivers/mtd/nand/nand_base.c | 154 +++++++++++++++++++++++++++++++++++++++++++ - include/linux/mtd/nand.h | 21 ++++++ - 2 files changed, 175 insertions(+) - ---- a/drivers/mtd/nand/nand_base.c -+++ b/drivers/mtd/nand/nand_base.c -@@ -1102,6 +1102,138 @@ out: - EXPORT_SYMBOL(nand_lock); - - /** -+ * nand_page_is_empty - check wether a NAND page contains only FFs -+ * @mtd: mtd info -+ * @data: data buffer -+ * @oob: oob buffer -+ * -+ * Reads the data stored in the databuf buffer and check if it contains only -+ * FFs. -+ * -+ * Return true if it does else return false. -+ */ -+bool nand_page_is_empty(struct mtd_info *mtd, void *data, void *oob) -+{ -+ u8 *buf; -+ int length; -+ u32 pattern = 0xffffffff; -+ int bitflips = 0; -+ int cnt; -+ -+ buf = data; -+ length = mtd->writesize; -+ while (length) { -+ cnt = length < sizeof(pattern) ? length : sizeof(pattern); -+ if (memcmp(&pattern, buf, cnt)) { -+ int i; -+ for (i = 0; i < cnt * BITS_PER_BYTE; i++) { -+ if (!(buf[i / BITS_PER_BYTE] & -+ (1 << (i % BITS_PER_BYTE)))) { -+ bitflips++; -+ if (bitflips > mtd->ecc_strength) -+ return false; -+ } -+ } -+ } -+ -+ buf += sizeof(pattern); -+ length -= sizeof(pattern); -+ } -+ -+ buf = oob; -+ length = mtd->oobsize; -+ while (length) { -+ cnt = length < sizeof(pattern) ? length : sizeof(pattern); -+ if (memcmp(&pattern, buf, cnt)) { -+ int i; -+ for (i = 0; i < cnt * BITS_PER_BYTE; i++) { -+ if (!(buf[i / BITS_PER_BYTE] & -+ (1 << (i % BITS_PER_BYTE)))) { -+ bitflips++; -+ if (bitflips > mtd->ecc_strength) -+ return false; -+ } -+ } -+ } -+ -+ buf += sizeof(pattern); -+ length -= sizeof(pattern); -+ } -+ -+ return true; -+} -+EXPORT_SYMBOL(nand_page_is_empty); -+ -+/** -+ * nand_page_get_status - retrieve page status from the page status table (pst) -+ * @mtd: mtd info -+ * @page: page you want to get status on -+ * -+ * Return the page status. -+ */ -+int nand_page_get_status(struct mtd_info *mtd, int page) -+{ -+ struct nand_chip *chip = mtd->priv; -+ u8 shift = (page % 4) * 2; -+ uint64_t offset = page / 4; -+ int ret = NAND_PAGE_STATUS_UNKNOWN; -+ -+ if (chip->pst) -+ ret = (chip->pst[offset] >> shift) & 0x3; -+ -+ return ret; -+} -+EXPORT_SYMBOL(nand_page_get_status); -+ -+/** -+ * nand_page_set_status - assign page status from in the page status table -+ * @mtd: mtd info -+ * @page: page you want to get status on -+ * @status: new status to assign -+ */ -+void nand_page_set_status(struct mtd_info *mtd, int page, -+ enum nand_page_status status) -+{ -+ struct nand_chip *chip = mtd->priv; -+ u8 shift; -+ uint64_t offset; -+ -+ if (!chip->pst) -+ return; -+ -+ shift = (page % 4) * 2; -+ offset = page / 4; -+ chip->pst[offset] &= ~(0x3 << shift); -+ chip->pst[offset] |= (status & 0x3) << shift; -+} -+EXPORT_SYMBOL(nand_page_set_status); -+ -+/** -+ * nand_pst_create - create a page status table -+ * @mtd: mtd info -+ * -+ * Allocate a page status table and assign it to the mtd device. -+ * -+ * Returns 0 in case of success or -ERRNO in case of error. -+ */ -+int nand_pst_create(struct mtd_info *mtd) -+{ -+ struct nand_chip *chip = mtd->priv; -+ -+ if (chip->pst) -+ return 0; -+ -+ chip->pst = kzalloc(mtd->size >> -+ (chip->page_shift + mtd->subpage_sft + 2), -+ GFP_KERNEL); -+ if (!chip->pst) -+ return -ENOMEM; -+ -+ return 0; -+} -+EXPORT_SYMBOL(nand_pst_create); -+ -+/** - * nand_read_page_raw - [INTERN] read raw page data without ecc - * @mtd: mtd info structure - * @chip: nand chip info structure -@@ -2539,6 +2671,7 @@ static int nand_do_write_ops(struct mtd_ - uint8_t *wbuf = buf; - int use_bufpoi; - int part_pagewr = (column || writelen < (mtd->writesize - 1)); -+ int subpage; - - if (part_pagewr) - use_bufpoi = 1; -@@ -2574,6 +2707,14 @@ static int nand_do_write_ops(struct mtd_ - if (ret) - break; - -+ for (subpage = column / chip->subpagesize; -+ subpage < (column + writelen) / chip->subpagesize; -+ subpage++) -+ nand_page_set_status(mtd, -+ (page << mtd->subpage_sft) + -+ subpage, -+ NAND_PAGE_FILLED); -+ - writelen -= bytes; - if (!writelen) - break; -@@ -2979,6 +3120,7 @@ int nand_erase_nand(struct mtd_info *mtd - int page, status, pages_per_block, ret, chipnr; - struct nand_chip *chip = mtd->priv; - loff_t len; -+ int i; - - pr_debug("%s: start = 0x%012llx, len = %llu\n", - __func__, (unsigned long long)instr->addr, -@@ -3051,6 +3193,18 @@ int nand_erase_nand(struct mtd_info *mtd - goto erase_exit; - } - -+ for (i = 0; i < pages_per_block; i++) { -+ int subpage; -+ for (subpage = 0; -+ subpage < 1 << mtd->subpage_sft; -+ subpage++) { -+ nand_page_set_status(mtd, -+ ((page + i) << mtd->subpage_sft) + -+ subpage, -+ NAND_PAGE_EMPTY); -+ } -+ } -+ - /* Increment page address and decrement length */ - len -= (1ULL << chip->phys_erase_shift); - page += pages_per_block; ---- a/include/linux/mtd/nand.h -+++ b/include/linux/mtd/nand.h -@@ -521,6 +521,24 @@ struct nand_ecc_ctrl { - int page); - }; - -+/* -+ * Constants for page status -+ */ -+enum nand_page_status { -+ NAND_PAGE_STATUS_UNKNOWN, -+ NAND_PAGE_EMPTY, -+ NAND_PAGE_FILLED, -+}; -+ -+bool nand_page_is_empty(struct mtd_info *mtd, void *data, void *oob); -+ -+int nand_page_get_status(struct mtd_info *mtd, int page); -+ -+void nand_page_set_status(struct mtd_info *mtd, int page, -+ enum nand_page_status status); -+ -+int nand_pst_create(struct mtd_info *mtd); -+ - /** - * struct nand_buffers - buffer structure for read/write - * @ecccalc: buffer pointer for calculated ECC, size is oobsize. -@@ -630,6 +648,7 @@ struct nand_buffers { - * @bbt_md: [REPLACEABLE] bad block table mirror descriptor - * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial - * bad block scan. -+ * @pst: [INTERN] page status table - * @controller: [REPLACEABLE] a pointer to a hardware controller - * structure which is shared among multiple independent - * devices. -@@ -718,6 +737,8 @@ struct nand_chip { - - struct nand_bbt_descr *badblock_pattern; - -+ uint8_t *pst; -+ - struct list_head partitions; - struct mutex part_lock; - diff --git a/target/linux/sunxi/patches-4.1/114-mtd-randomizer-into-nand-framework.patch b/target/linux/sunxi/patches-4.1/114-mtd-randomizer-into-nand-framework.patch deleted file mode 100644 index 173bd1e..0000000 --- a/target/linux/sunxi/patches-4.1/114-mtd-randomizer-into-nand-framework.patch +++ /dev/null @@ -1,847 +0,0 @@ -From 293984c7f167a08285596ef2166d8ab9cb571778 Mon Sep 17 00:00:00 2001 -From: Boris BREZILLON <boris.brezillon@free-electrons.com> -Date: Mon, 28 Jul 2014 14:46:26 +0200 -Subject: [PATCH] mtd: nand: Introduce a randomizer layer in the NAND framework - -This patch introduce a new layer in the NAND framework to support both HW -and SW randomizers. - -This randomization is required on some MLC/TLC NAND chips which do not -support large islands of same patterns. - -The randomizer layer defines a nand_rnd_ctrl struct which is intended to -be used by NAND core functions or NAND drivers to randomize/derandomize -data stored on NAND chips. - -The implementation can implement any of these functions: -- config: prepare a random transfer to/from the NAND chip -- write_buf: randomize and write data to the NAND chip -- read_buf: read and derandomize data from the NAND chip - -read/write_buf functions are always called after a config call. -The config call specify the page, the column within the page and the action -that will take place after the config (either read or write). -If column is set to -1, the randomizer is disabled. -If page is set to -1, we keep working on the same page. - -The randomizer layer provides helper functions that choose wether the -randomizer or the chip read/write_buf should be used. - -Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - drivers/mtd/nand/nand_base.c | 278 ++++++++++++++++++++++++++++++++++--------- - include/linux/mtd/nand.h | 98 +++++++++++++++ - 2 files changed, 321 insertions(+), 55 deletions(-) - ---- a/drivers/mtd/nand/nand_base.c -+++ b/drivers/mtd/nand/nand_base.c -@@ -1102,6 +1102,62 @@ out: - EXPORT_SYMBOL(nand_lock); - - /** -+ * nand_rnd_is_activ - check wether a region of a NAND page requires NAND -+ * randomizer to be disabled -+ * @mtd: mtd info -+ * @page: NAND page -+ * @column: offset within the page -+ * @len: len of the region -+ * -+ * Returns 1 if the randomizer should be enabled, 0 if not, or -ERR in case of -+ * error. -+ * -+ * In case of success len will contain the size of the region: -+ * - if the requested region fits in a NAND random region len will not change -+ * - else len will be replaced by the available length within the NAND random -+ * region -+ */ -+int nand_rnd_is_activ(struct mtd_info *mtd, int page, int column, int *len) -+{ -+ struct nand_chip *chip = mtd->priv; -+ struct nand_rnd_layout *layout = chip->cur_rnd->layout; -+ struct nand_rndfree *range; -+ int ret = 1; -+ int tmp; -+ int i; -+ -+ if (!len || *len < 0 || column < 0 || -+ column + *len > mtd->writesize + mtd->oobsize) -+ return -EINVAL; -+ -+ if (layout) { -+ for (i = 0; i < layout->nranges; i++) { -+ range = &layout->ranges[i]; -+ if (column + *len <= range->offset) { -+ break; -+ } else if (column >= range->offset + range->length) { -+ continue; -+ } else if (column < range->offset) { -+ tmp = range->offset - column; -+ if (*len > tmp) -+ *len = tmp; -+ break; -+ } else { -+ tmp = range->offset + range->length - column; -+ if (*len > tmp) -+ *len = tmp; -+ ret = 0; -+ break; -+ } -+ -+ } -+ } -+ -+ return ret; -+} -+EXPORT_SYMBOL(nand_rnd_is_activ); -+ -+/** - * nand_page_is_empty - check wether a NAND page contains only FFs - * @mtd: mtd info - * @data: data buffer -@@ -1246,9 +1302,14 @@ EXPORT_SYMBOL(nand_pst_create); - static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int oob_required, int page) - { -- chip->read_buf(mtd, buf, mtd->writesize); -- if (oob_required) -- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); -+ nand_rnd_config(mtd, page, 0, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, buf, mtd->writesize); -+ if (oob_required) { -+ nand_rnd_config(mtd, page, mtd->writesize, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, chip->oob_poi, mtd->oobsize); -+ } -+ nand_rnd_config(mtd, -1, -1, NAND_RND_READ); -+ - return 0; - } - -@@ -1270,28 +1331,40 @@ static int nand_read_page_raw_syndrome(s - int eccbytes = chip->cur_ecc->bytes; - uint8_t *oob = chip->oob_poi; - int steps, size; -+ int column = 0; - - for (steps = chip->cur_ecc->steps; steps > 0; steps--) { -- chip->read_buf(mtd, buf, eccsize); -+ nand_rnd_config(mtd, page, column, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, buf, eccsize); - buf += eccsize; -+ column += eccsize; - - if (chip->cur_ecc->prepad) { -- chip->read_buf(mtd, oob, chip->cur_ecc->prepad); -+ nand_rnd_config(mtd, page, column, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, oob, chip->cur_ecc->prepad); - oob += chip->cur_ecc->prepad; -+ column += chip->cur_ecc->prepad; - } - -- chip->read_buf(mtd, oob, eccbytes); -+ nand_rnd_config(mtd, page, column, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, oob, eccbytes); - oob += eccbytes; -+ column += eccbytes; - - if (chip->cur_ecc->postpad) { -- chip->read_buf(mtd, oob, chip->cur_ecc->postpad); -+ nand_rnd_config(mtd, page, column, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, oob, chip->cur_ecc->postpad); - oob += chip->cur_ecc->postpad; -+ column += chip->cur_ecc->postpad; - } - } - - size = mtd->oobsize - (oob - chip->oob_poi); -- if (size) -- chip->read_buf(mtd, oob, size); -+ if (size) { -+ nand_rnd_config(mtd, page, column, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, oob, size); -+ } -+ nand_rnd_config(mtd, -1, -1, NAND_RND_READ); - - return 0; - } -@@ -1380,7 +1453,8 @@ static int nand_read_subpage(struct mtd_ - chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1); - - p = bufpoi + data_col_addr; -- chip->read_buf(mtd, p, datafrag_len); -+ nand_rnd_config(mtd, -1, data_col_addr, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, p, datafrag_len); - - /* Calculate ECC */ - for (i = 0; i < eccfrag_len; -@@ -1399,7 +1473,8 @@ static int nand_read_subpage(struct mtd_ - } - if (gaps) { - chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1); -- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); -+ nand_rnd_config(mtd, -1, mtd->writesize, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, chip->oob_poi, mtd->oobsize); - } else { - /* - * Send the command to read the particular ECC bytes take care -@@ -1415,7 +1490,8 @@ static int nand_read_subpage(struct mtd_ - - chip->cmdfunc(mtd, NAND_CMD_RNDOUT, - mtd->writesize + aligned_pos, -1); -- chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len); -+ nand_rnd_config(mtd, -1, mtd->writesize + aligned_pos, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len); - } - - for (i = 0; i < eccfrag_len; i++) -@@ -1436,6 +1512,7 @@ static int nand_read_subpage(struct mtd_ - max_bitflips = max_t(unsigned int, max_bitflips, stat); - } - } -+ nand_rnd_config(mtd, -1, -1, NAND_RND_READ); - return max_bitflips; - } - -@@ -1460,13 +1537,17 @@ static int nand_read_page_hwecc(struct m - uint8_t *ecc_code = chip->buffers->ecccode; - uint32_t *eccpos = chip->cur_ecc->layout->eccpos; - unsigned int max_bitflips = 0; -+ int column = 0; - - for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { - chip->cur_ecc->hwctl(mtd, NAND_ECC_READ); -- chip->read_buf(mtd, p, eccsize); -+ nand_rnd_config(mtd, page, column, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, p, eccsize); - chip->cur_ecc->calculate(mtd, p, &ecc_calc[i]); -+ column += eccsize; - } -- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); -+ nand_rnd_config(mtd, page, column, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, chip->oob_poi, mtd->oobsize); - - for (i = 0; i < chip->cur_ecc->total; i++) - ecc_code[i] = chip->oob_poi[eccpos[i]]; -@@ -1486,6 +1567,7 @@ static int nand_read_page_hwecc(struct m - max_bitflips = max_t(unsigned int, max_bitflips, stat); - } - } -+ nand_rnd_config(mtd, -1, -1, NAND_RND_READ); - return max_bitflips; - } - -@@ -1514,11 +1596,14 @@ static int nand_read_page_hwecc_oob_firs - uint32_t *eccpos = chip->cur_ecc->layout->eccpos; - uint8_t *ecc_calc = chip->buffers->ecccalc; - unsigned int max_bitflips = 0; -+ int column = 0; - - /* Read the OOB area first */ - chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); -- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); -+ nand_rnd_config(mtd, page, mtd->writesize, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, chip->oob_poi, mtd->oobsize); - chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); -+ column = 0; - - for (i = 0; i < chip->cur_ecc->total; i++) - ecc_code[i] = chip->oob_poi[eccpos[i]]; -@@ -1527,7 +1612,8 @@ static int nand_read_page_hwecc_oob_firs - int stat; - - chip->cur_ecc->hwctl(mtd, NAND_ECC_READ); -- chip->read_buf(mtd, p, eccsize); -+ nand_rnd_config(mtd, page, column, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, p, eccsize); - chip->cur_ecc->calculate(mtd, p, &ecc_calc[i]); - - stat = chip->cur_ecc->correct(mtd, p, &ecc_code[i], NULL); -@@ -1538,6 +1624,7 @@ static int nand_read_page_hwecc_oob_firs - max_bitflips = max_t(unsigned int, max_bitflips, stat); - } - } -+ nand_rnd_config(mtd, -1, -1, NAND_RND_READ); - return max_bitflips; - } - -@@ -1561,20 +1648,27 @@ static int nand_read_page_syndrome(struc - uint8_t *p = buf; - uint8_t *oob = chip->oob_poi; - unsigned int max_bitflips = 0; -+ int column = 0; - - for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { - int stat; - - chip->cur_ecc->hwctl(mtd, NAND_ECC_READ); -- chip->read_buf(mtd, p, eccsize); -+ nand_rnd_config(mtd, page, column, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, p, eccsize); -+ column += eccsize; - - if (chip->cur_ecc->prepad) { -- chip->read_buf(mtd, oob, chip->cur_ecc->prepad); -+ nand_rnd_config(mtd, page, column, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, oob, chip->cur_ecc->prepad); - oob += chip->cur_ecc->prepad; - } - - chip->cur_ecc->hwctl(mtd, NAND_ECC_READSYN); -- chip->read_buf(mtd, oob, eccbytes); -+ nand_rnd_config(mtd, page, column, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, oob, eccbytes); -+ column += eccbytes; -+ - stat = chip->cur_ecc->correct(mtd, p, oob, NULL); - - if (stat < 0) { -@@ -1587,29 +1681,36 @@ static int nand_read_page_syndrome(struc - oob += eccbytes; - - if (chip->cur_ecc->postpad) { -- chip->read_buf(mtd, oob, chip->cur_ecc->postpad); -+ nand_rnd_config(mtd, page, column, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, oob, chip->cur_ecc->postpad); -+ column += chip->cur_ecc->postpad; - oob += chip->cur_ecc->postpad; - } - } - - /* Calculate remaining oob bytes */ - i = mtd->oobsize - (oob - chip->oob_poi); -- if (i) -- chip->read_buf(mtd, oob, i); -+ if (i) { -+ nand_rnd_config(mtd, page, column, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, oob, i); -+ } -+ nand_rnd_config(mtd, -1, -1, NAND_RND_READ); - - return max_bitflips; - } - - /** - * nand_transfer_oob - [INTERN] Transfer oob to client buffer -- * @chip: nand chip structure -+ * @mtd: mtd structure - * @oob: oob destination address - * @ops: oob ops structure - * @len: size of oob to transfer - */ --static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob, -+static uint8_t *nand_transfer_oob(struct mtd_info *mtd, uint8_t *oob, - struct mtd_oob_ops *ops, size_t len) - { -+ struct nand_chip *chip = mtd->priv; -+ - switch (ops->mode) { - - case MTD_OPS_PLACE_OOB: -@@ -1737,6 +1838,7 @@ read_retry: - * Now read the page into the buffer. Absent an error, - * the read methods return max bitflips per ecc step. - */ -+ nand_rnd_config(mtd, page, -1, NAND_RND_READ); - if (unlikely(ops->mode == MTD_OPS_RAW)) - ret = chip->cur_ecc->read_page_raw(mtd, chip, - bufpoi, -@@ -1753,6 +1855,8 @@ read_retry: - bufpoi, - oob_required, - page); -+ nand_rnd_config(mtd, -1, -1, NAND_RND_READ); -+ - if (ret < 0) { - if (use_bufpoi) - /* Invalidate page cache */ -@@ -1780,8 +1884,8 @@ read_retry: - int toread = min(oobreadlen, max_oobsize); - - if (toread) { -- oob = nand_transfer_oob(chip, -- oob, ops, toread); -+ oob = nand_transfer_oob(mtd, oob, ops, -+ toread); - oobreadlen -= toread; - } - } -@@ -1909,12 +2013,15 @@ static int nand_part_read(struct mtd_inf - nand_get_device(part->master, FL_READING); - if (part->ecc) - chip->cur_ecc = part->ecc; -+ if (part->rnd) -+ chip->cur_rnd = part->rnd; - ops.len = len; - ops.datbuf = buf; - ops.oobbuf = NULL; - ops.mode = MTD_OPS_PLACE_OOB; - ret = nand_do_read_ops(part->master, from, &ops); - *retlen = ops.retlen; -+ chip->cur_rnd = &chip->rnd; - chip->cur_ecc = &chip->ecc; - nand_release_device(part->master); - return ret; -@@ -1930,7 +2037,9 @@ static int nand_read_oob_std(struct mtd_ - int page) - { - chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); -- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); -+ nand_rnd_config(mtd, page, mtd->writesize, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, chip->oob_poi, mtd->oobsize); -+ nand_rnd_config(mtd, -1, -1, NAND_RND_READ); - return 0; - } - -@@ -1949,7 +2058,7 @@ static int nand_read_oob_syndrome(struct - chip->cur_ecc->postpad; - int eccsize = chip->cur_ecc->size; - uint8_t *bufpoi = chip->oob_poi; -- int i, toread, sndrnd = 0, pos; -+ int i, toread, sndrnd = 0, pos = eccsize; - - chip->cmdfunc(mtd, NAND_CMD_READ0, chip->cur_ecc->size, page); - for (i = 0; i < chip->cur_ecc->steps; i++) { -@@ -1962,12 +2071,17 @@ static int nand_read_oob_syndrome(struct - } else - sndrnd = 1; - toread = min_t(int, length, chunk); -- chip->read_buf(mtd, bufpoi, toread); -+ nand_rnd_config(mtd, page, pos, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, bufpoi, toread); - bufpoi += toread; - length -= toread; - } -- if (length > 0) -- chip->read_buf(mtd, bufpoi, length); -+ if (length > 0) { -+ pos = mtd->writesize + mtd->oobsize - length; -+ nand_rnd_config(mtd, page, pos, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, bufpoi, length); -+ } -+ nand_rnd_config(mtd, -1, -1, NAND_RND_READ); - - return 0; - } -@@ -1986,7 +2100,9 @@ static int nand_write_oob_std(struct mtd - int length = mtd->oobsize; - - chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page); -- chip->write_buf(mtd, buf, length); -+ nand_rnd_config(mtd, page, mtd->writesize, NAND_RND_WRITE); -+ nand_rnd_write_buf(mtd, buf, length); -+ nand_rnd_config(mtd, -1, -1, NAND_RND_WRITE); - /* Send command to program the OOB data */ - chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); - -@@ -2042,12 +2158,18 @@ static int nand_write_oob_syndrome(struc - } else - sndcmd = 1; - len = min_t(int, length, chunk); -- chip->write_buf(mtd, bufpoi, len); -+ nand_rnd_config(mtd, page, pos, NAND_RND_WRITE); -+ nand_rnd_write_buf(mtd, bufpoi, len); - bufpoi += len; - length -= len; - } -- if (length > 0) -- chip->write_buf(mtd, bufpoi, length); -+ if (length > 0) { -+ pos = mtd->writesize + mtd->oobsize - length; -+ nand_rnd_config(mtd, page, pos, NAND_RND_WRITE); -+ nand_rnd_write_buf(mtd, bufpoi, length); -+ } -+ -+ nand_rnd_config(mtd, -1, -1, NAND_RND_WRITE); - - chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); - status = chip->waitfunc(mtd, chip); -@@ -2116,7 +2238,7 @@ static int nand_do_read_oob(struct mtd_i - break; - - len = min(len, readlen); -- buf = nand_transfer_oob(chip, buf, ops, len); -+ buf = nand_transfer_oob(mtd, buf, ops, len); - - if (chip->options & NAND_NEED_READRDY) { - /* Apply delay or wait for ready/busy pin */ -@@ -2226,6 +2348,8 @@ static int nand_part_read_oob(struct mtd - nand_get_device(part->master, FL_READING); - if (part->ecc) - chip->cur_ecc = part->ecc; -+ if (part->rnd) -+ chip->cur_rnd = part->rnd; - - switch (ops->mode) { - case MTD_OPS_PLACE_OOB: -@@ -2243,6 +2367,7 @@ static int nand_part_read_oob(struct mtd - ret = nand_do_read_ops(part->master, from, ops); - - out: -+ chip->cur_rnd = &chip->rnd; - chip->cur_ecc = &chip->ecc; - nand_release_device(part->master); - return ret; -@@ -2261,9 +2386,11 @@ out: - static int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf, int oob_required) - { -- chip->write_buf(mtd, buf, mtd->writesize); -- if (oob_required) -- chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); -+ nand_rnd_write_buf(mtd, buf, mtd->writesize); -+ if (oob_required) { -+ nand_rnd_config(mtd, -1, mtd->writesize, NAND_RND_WRITE); -+ nand_rnd_write_buf(mtd, chip->oob_poi, mtd->oobsize); -+ } - - return 0; - } -@@ -2285,28 +2412,39 @@ static int nand_write_page_raw_syndrome( - int eccbytes = chip->cur_ecc->bytes; - uint8_t *oob = chip->oob_poi; - int steps, size; -+ int column = 0; - - for (steps = chip->cur_ecc->steps; steps > 0; steps--) { -- chip->write_buf(mtd, buf, eccsize); -+ nand_rnd_config(mtd, -1, column, NAND_RND_WRITE); -+ nand_rnd_write_buf(mtd, buf, eccsize); - buf += eccsize; -+ column += eccsize; - - if (chip->cur_ecc->prepad) { -- chip->write_buf(mtd, oob, chip->cur_ecc->prepad); -+ nand_rnd_config(mtd, -1, column, NAND_RND_WRITE); -+ nand_rnd_write_buf(mtd, oob, chip->cur_ecc->prepad); - oob += chip->cur_ecc->prepad; -+ column += chip->cur_ecc->prepad; - } - -- chip->write_buf(mtd, oob, eccbytes); -+ nand_rnd_config(mtd, -1, column, NAND_RND_WRITE); -+ nand_rnd_write_buf(mtd, oob, eccbytes); - oob += eccbytes; -+ column += eccbytes; - - if (chip->cur_ecc->postpad) { -- chip->write_buf(mtd, oob, chip->cur_ecc->postpad); -+ nand_rnd_config(mtd, -1, column, NAND_RND_WRITE); -+ nand_rnd_write_buf(mtd, oob, chip->cur_ecc->postpad); - oob += chip->cur_ecc->postpad; -+ column += chip->cur_ecc->postpad; - } - } - - size = mtd->oobsize - (oob - chip->oob_poi); -- if (size) -- chip->write_buf(mtd, oob, size); -+ if (size) { -+ nand_rnd_config(mtd, -1, column, NAND_RND_WRITE); -+ nand_rnd_write_buf(mtd, oob, size); -+ } - - return 0; - } -@@ -2353,17 +2491,21 @@ static int nand_write_page_hwecc(struct - uint8_t *ecc_calc = chip->buffers->ecccalc; - const uint8_t *p = buf; - uint32_t *eccpos = chip->cur_ecc->layout->eccpos; -+ int column = 0; - - for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { - chip->cur_ecc->hwctl(mtd, NAND_ECC_WRITE); -- chip->write_buf(mtd, p, eccsize); -+ nand_rnd_config(mtd, -1, column, NAND_RND_WRITE); -+ nand_rnd_write_buf(mtd, p, eccsize); - chip->cur_ecc->calculate(mtd, p, &ecc_calc[i]); -+ column += eccsize; - } - - for (i = 0; i < chip->cur_ecc->total; i++) - chip->oob_poi[eccpos[i]] = ecc_calc[i]; - -- chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); -+ nand_rnd_config(mtd, -1, column, NAND_RND_WRITE); -+ nand_rnd_write_buf(mtd, chip->oob_poi, mtd->oobsize); - - return 0; - } -@@ -2399,7 +2541,9 @@ static int nand_write_subpage_hwecc(stru - chip->cur_ecc->hwctl(mtd, NAND_ECC_WRITE); - - /* write data (untouched subpages already masked by 0xFF) */ -- chip->write_buf(mtd, buf, ecc_size); -+ nand_rnd_config(mtd, -1, offset, NAND_RND_WRITE); -+ nand_rnd_write_buf(mtd, buf, ecc_size); -+ offset += ecc_size; - - /* mask ECC of un-touched subpages by padding 0xFF */ - if ((step < start_step) || (step > end_step)) -@@ -2424,7 +2568,8 @@ static int nand_write_subpage_hwecc(stru - chip->oob_poi[eccpos[i]] = ecc_calc[i]; - - /* write OOB buffer to NAND device */ -- chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); -+ nand_rnd_config(mtd, -1, offset, NAND_RND_WRITE); -+ nand_rnd_write_buf(mtd, chip->oob_poi, mtd->oobsize); - - return 0; - } -@@ -2449,31 +2594,42 @@ static int nand_write_page_syndrome(stru - int eccsteps = chip->cur_ecc->steps; - const uint8_t *p = buf; - uint8_t *oob = chip->oob_poi; -+ int column = 0; - - for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { - - chip->cur_ecc->hwctl(mtd, NAND_ECC_WRITE); -- chip->write_buf(mtd, p, eccsize); -+ nand_rnd_config(mtd, -1, column, NAND_RND_WRITE); -+ nand_rnd_write_buf(mtd, p, eccsize); -+ column += eccsize; - - if (chip->cur_ecc->prepad) { -- chip->write_buf(mtd, oob, chip->cur_ecc->prepad); -+ nand_rnd_config(mtd, -1, column, NAND_RND_WRITE); -+ nand_rnd_write_buf(mtd, oob, chip->cur_ecc->prepad); - oob += chip->cur_ecc->prepad; -+ column += chip->cur_ecc->prepad; - } - - chip->cur_ecc->calculate(mtd, p, oob); -- chip->write_buf(mtd, oob, eccbytes); -+ nand_rnd_config(mtd, -1, column, NAND_RND_WRITE); -+ nand_rnd_write_buf(mtd, oob, eccbytes); - oob += eccbytes; -+ column += eccbytes; - - if (chip->cur_ecc->postpad) { -- chip->write_buf(mtd, oob, chip->cur_ecc->postpad); -+ nand_rnd_config(mtd, -1, column, NAND_RND_WRITE); -+ nand_rnd_write_buf(mtd, oob, chip->cur_ecc->postpad); - oob += chip->cur_ecc->postpad; -+ column += chip->cur_ecc->postpad; - } - } - - /* Calculate remaining oob bytes */ - i = mtd->oobsize - (oob - chip->oob_poi); -- if (i) -- chip->write_buf(mtd, oob, i); -+ if (i) { -+ nand_rnd_config(mtd, -1, column, NAND_RND_WRITE); -+ nand_rnd_write_buf(mtd, oob, i); -+ } - - return 0; - } -@@ -2504,6 +2660,7 @@ static int nand_write_page(struct mtd_in - - chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); - -+ nand_rnd_config(mtd, page, 0, NAND_RND_WRITE); - if (unlikely(raw)) - status = chip->cur_ecc->write_page_raw(mtd, chip, buf, - oob_required); -@@ -2514,6 +2671,7 @@ static int nand_write_page(struct mtd_in - else - status = chip->cur_ecc->write_page(mtd, chip, buf, - oob_required); -+ nand_rnd_config(mtd, -1, -1, NAND_RND_WRITE); - - if (status < 0) - return status; -@@ -2803,6 +2961,8 @@ static int panic_nand_part_write(struct - panic_nand_get_device(chip, part->master, FL_WRITING); - if (part->ecc) - chip->cur_ecc = part->ecc; -+ if (part->rnd) -+ chip->cur_rnd = part->rnd; - - ops.len = len; - ops.datbuf = (uint8_t *)buf; -@@ -2811,6 +2971,7 @@ static int panic_nand_part_write(struct - - ret = nand_do_write_ops(part->master, to, &ops); - -+ chip->cur_rnd = &chip->rnd; - chip->cur_ecc = &chip->ecc; - *retlen = ops.retlen; - return ret; -@@ -2865,12 +3026,15 @@ static int nand_part_write(struct mtd_in - nand_get_device(part->master, FL_WRITING); - if (part->ecc) - chip->cur_ecc = part->ecc; -+ if (part->rnd) -+ chip->cur_rnd = part->rnd; - ops.len = len; - ops.datbuf = (uint8_t *)buf; - ops.oobbuf = NULL; - ops.mode = MTD_OPS_PLACE_OOB; - ret = nand_do_write_ops(part->master, to, &ops); - *retlen = ops.retlen; -+ chip->cur_rnd = &chip->rnd; - chip->cur_ecc = &chip->ecc; - nand_release_device(part->master); - return ret; -@@ -3032,6 +3196,8 @@ static int nand_part_write_oob(struct mt - nand_get_device(part->master, FL_WRITING); - if (part->ecc) - chip->cur_ecc = part->ecc; -+ if (part->rnd) -+ chip->cur_rnd = part->rnd; - - switch (ops->mode) { - case MTD_OPS_PLACE_OOB: -@@ -3049,6 +3215,7 @@ static int nand_part_write_oob(struct mt - ret = nand_do_write_ops(part->master, to, ops); - - out: -+ chip->cur_rnd = &chip->rnd; - chip->cur_ecc = &chip->ecc; - nand_release_device(part->master); - return ret; -@@ -4749,6 +4916,7 @@ int nand_scan_tail(struct mtd_info *mtd) - mutex_init(&chip->part_lock); - - chip->cur_ecc = &chip->ecc; -+ chip->cur_rnd = &chip->rnd; - - /* Allow subpage writes up to ecc.steps. Not possible for MLC flash */ - if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) { ---- a/include/linux/mtd/nand.h -+++ b/include/linux/mtd/nand.h -@@ -539,6 +539,64 @@ void nand_page_set_status(struct mtd_inf - - int nand_pst_create(struct mtd_info *mtd); - -+/* -+ * Constants for randomizer modes -+ */ -+typedef enum { -+ NAND_RND_NONE, -+ NAND_RND_SOFT, -+ NAND_RND_HW, -+} nand_rnd_modes_t; -+ -+/* -+ * Constants for randomizer actions -+ */ -+enum nand_rnd_action { -+ NAND_RND_NO_ACTION, -+ NAND_RND_READ, -+ NAND_RND_WRITE, -+}; -+ -+/** -+ * struct nand_rndfree - Structure defining a NAND page region where the -+ * randomizer should be disabled -+ * @offset: range offset -+ * @length: range length -+ */ -+struct nand_rndfree { -+ u32 offset; -+ u32 length; -+}; -+ -+/** -+ * struct nand_rnd_layout - Structure defining rndfree regions -+ * @nranges: number of ranges -+ * @ranges: array defining the rndfree regions -+ */ -+struct nand_rnd_layout { -+ int nranges; -+ struct nand_rndfree ranges[0]; -+}; -+ -+/** -+ * struct nand_rnd_ctrl - Randomizer Control structure -+ * @mode: Randomizer mode -+ * @config: function to prepare the randomizer (i.e.: set the appropriate -+ * seed/init value). -+ * @read_buf: function that read from the NAND and descramble the retrieved -+ * data. -+ * @write_buf: function that scramble data before writing it to the NAND. -+ */ -+struct nand_rnd_ctrl { -+ nand_rnd_modes_t mode; -+ struct nand_rnd_layout *layout; -+ void *priv; -+ int (*config)(struct mtd_info *mtd, int page, int column, -+ enum nand_rnd_action action); -+ void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len); -+ void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len); -+}; -+ - /** - * struct nand_buffers - buffer structure for read/write - * @ecccalc: buffer pointer for calculated ECC, size is oobsize. -@@ -731,6 +789,9 @@ struct nand_chip { - struct nand_buffers *buffers; - struct nand_hw_control hwcontrol; - -+ struct nand_rnd_ctrl rnd; -+ struct nand_rnd_ctrl *cur_rnd; -+ - uint8_t *bbt; - struct nand_bbt_descr *bbt_td; - struct nand_bbt_descr *bbt_md; -@@ -752,6 +813,7 @@ struct nand_chip { - * @master: MTD device representing the NAND chip - * @offset: partition offset - * @ecc: partition specific ECC struct -+ * @rnd: partition specific randomizer struct - * @release: function used to release this nand_part struct - * - * NAND partitions work as standard MTD partitions except it can override -@@ -765,6 +827,7 @@ struct nand_part { - struct mtd_info *master; - uint64_t offset; - struct nand_ecc_ctrl *ecc; -+ struct nand_rnd_ctrl *rnd; - void (*release)(struct nand_part *part); - }; - -@@ -902,6 +965,41 @@ extern int nand_erase_nand(struct mtd_in - extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, uint8_t *buf); - -+static inline int nand_rnd_config(struct mtd_info *mtd, int page, int column, -+ enum nand_rnd_action action) -+{ -+ struct nand_chip *chip = mtd->priv; -+ -+ if (chip->cur_rnd && chip->cur_rnd->config) -+ return chip->cur_rnd->config(mtd, page, column, action); -+ -+ return 0; -+} -+ -+static inline void nand_rnd_write_buf(struct mtd_info *mtd, const uint8_t *buf, -+ int len) -+{ -+ struct nand_chip *chip = mtd->priv; -+ -+ if (chip->cur_rnd && chip->cur_rnd->read_buf) -+ chip->cur_rnd->write_buf(mtd, buf, len); -+ else -+ chip->write_buf(mtd, buf, len); -+} -+ -+static inline void nand_rnd_read_buf(struct mtd_info *mtd, uint8_t *buf, -+ int len) -+{ -+ struct nand_chip *chip = mtd->priv; -+ -+ if (chip->cur_rnd && chip->cur_rnd->read_buf) -+ chip->cur_rnd->read_buf(mtd, buf, len); -+ else -+ chip->read_buf(mtd, buf, len); -+} -+ -+int nand_rnd_is_activ(struct mtd_info *mtd, int page, int column, int *len); -+ - /** - * struct platform_nand_chip - chip level device structure - * @nr_chips: max. number of chips to scan for diff --git a/target/linux/sunxi/patches-4.1/115-mtd-fetch-randomizer-mode.patch b/target/linux/sunxi/patches-4.1/115-mtd-fetch-randomizer-mode.patch deleted file mode 100644 index f5dfba0..0000000 --- a/target/linux/sunxi/patches-4.1/115-mtd-fetch-randomizer-mode.patch +++ /dev/null @@ -1,80 +0,0 @@ -From eb7f9115409710732ebc4dfe1be629252280910e Mon Sep 17 00:00:00 2001 -From: Boris BREZILLON <boris.brezillon@free-electrons.com> -Date: Mon, 28 Jul 2014 14:47:04 +0200 -Subject: [PATCH] of: mtd: Add NAND randomizer mode retrieval - -Add a of_get_nand_rnd_mode() helper function. - -Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - drivers/of/of_mtd.c | 35 +++++++++++++++++++++++++++++++++++ - include/linux/of_mtd.h | 6 ++++++ - 2 files changed, 41 insertions(+) - ---- a/drivers/of/of_mtd.c -+++ b/drivers/of/of_mtd.c -@@ -84,6 +84,41 @@ int of_get_nand_ecc_strength(struct devi - EXPORT_SYMBOL_GPL(of_get_nand_ecc_strength); - - /** -+ * It maps 'enum nand_rnd_modes_t' found in include/linux/mtd/nand.h -+ * into the device tree binding of 'nand-rnd', so that MTD -+ * device driver can get nand rnd from device tree. -+ */ -+static const char *nand_rnd_modes[] = { -+ [NAND_RND_NONE] = "none", -+ [NAND_RND_SOFT] = "soft", -+ [NAND_RND_HW] = "hw", -+}; -+ -+/** -+ * of_get_nand_rnd_mode - Get nand randomizer mode for given device_node -+ * @np: Pointer to the given device_node -+ * -+ * The function gets randomizer mode string from property 'nand-rnd-mode', -+ * and return its index in nand_rnd_modes table, or errno in error case. -+ */ -+int of_get_nand_rnd_mode(struct device_node *np) -+{ -+ const char *pm; -+ int err, i; -+ -+ err = of_property_read_string(np, "nand-rnd-mode", &pm); -+ if (err < 0) -+ return err; -+ -+ for (i = 0; i < ARRAY_SIZE(nand_rnd_modes); i++) -+ if (!strcasecmp(pm, nand_rnd_modes[i])) -+ return i; -+ -+ return -ENODEV; -+} -+EXPORT_SYMBOL_GPL(of_get_nand_rnd_mode); -+ -+/** - * of_get_nand_bus_width - Get nand bus witdh for given device_node - * @np: Pointer to the given device_node - * ---- a/include/linux/of_mtd.h -+++ b/include/linux/of_mtd.h -@@ -15,6 +15,7 @@ - int of_get_nand_ecc_mode(struct device_node *np); - int of_get_nand_ecc_step_size(struct device_node *np); - int of_get_nand_ecc_strength(struct device_node *np); -+int of_get_nand_rnd_mode(struct device_node *np); - int of_get_nand_bus_width(struct device_node *np); - bool of_get_nand_on_flash_bbt(struct device_node *np); - -@@ -34,6 +35,11 @@ static inline int of_get_nand_ecc_streng - { - return -ENOSYS; - } -+ -+static inline int of_get_nand_rnd_mode(struct device_node *np) -+{ -+ return -ENOSYS; -+} - - static inline int of_get_nand_bus_width(struct device_node *np) - { diff --git a/target/linux/sunxi/patches-4.1/116-mtd-add-vendor-specific-initcode-infra.patch b/target/linux/sunxi/patches-4.1/116-mtd-add-vendor-specific-initcode-infra.patch deleted file mode 100644 index 5a4917c..0000000 --- a/target/linux/sunxi/patches-4.1/116-mtd-add-vendor-specific-initcode-infra.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 95430662a26332474f4a03a7f8f44fd8d80890b3 Mon Sep 17 00:00:00 2001 -From: Boris BREZILLON <b.brezillon.dev@gmail.com> -Date: Mon, 24 Feb 2014 16:28:32 +0100 -Subject: [PATCH] mtd: nand: Add manufacturer specific init code infrastructure - -Add new fields in nand_manufacturers and nand_chip struct to provide -manufacturer specific handling like read retries. - -Signed-off-by: Boris BREZILLON <b.brezillon.dev@gmail.com> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - drivers/mtd/nand/nand_base.c | 7 +++++++ - include/linux/mtd/nand.h | 4 ++++ - 2 files changed, 11 insertions(+) - ---- a/drivers/mtd/nand/nand_base.c -+++ b/drivers/mtd/nand/nand_base.c -@@ -4382,6 +4382,13 @@ ident_done: - if (mtd->writesize > 512 && chip->cmdfunc == nand_command) - chip->cmdfunc = nand_command_lp; - -+ if (nand_manuf_ids[maf_idx].init) { -+ int err; -+ err = nand_manuf_ids[maf_idx].init(mtd, id_data); -+ if (err) -+ return ERR_PTR(err); -+ } -+ - pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n", - *maf_id, *dev_id); - ---- a/include/linux/mtd/nand.h -+++ b/include/linux/mtd/nand.h -@@ -748,6 +748,9 @@ struct nand_chip { - int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip, - int feature_addr, uint8_t *subfeature_para); - int (*setup_read_retry)(struct mtd_info *mtd, int retry_mode); -+ void (*manuf_cleanup)(struct mtd_info *mtd); -+ -+ void *manuf_priv; - - int chip_delay; - unsigned int options; -@@ -950,6 +953,7 @@ struct nand_flash_dev { - struct nand_manufacturers { - int id; - char *name; -+ int (*init)(struct mtd_info *mtd, const uint8_t *id); - }; - - extern struct nand_flash_dev nand_flash_ids[]; diff --git a/target/linux/sunxi/patches-4.1/117-mtd-nand-add-hynix-init.patch b/target/linux/sunxi/patches-4.1/117-mtd-nand-add-hynix-init.patch deleted file mode 100644 index c6554da..0000000 --- a/target/linux/sunxi/patches-4.1/117-mtd-nand-add-hynix-init.patch +++ /dev/null @@ -1,220 +0,0 @@ -From 5c5e3963a1b58be1669da5da93f51dc339cd73d7 Mon Sep 17 00:00:00 2001 -From: Boris BREZILLON <b.brezillon.dev@gmail.com> -Date: Mon, 24 Feb 2014 16:30:22 +0100 -Subject: [PATCH] mtd: nand: Add hynix specific initializer - -Add an hynix initiliazer to manage read retries on h27uxgt8t2a chip. - -Signed-off-by: Boris BREZILLON <b.brezillon.dev@gmail.com> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - drivers/mtd/nand/Makefile | 2 +- - drivers/mtd/nand/nand_hynix.c | 159 ++++++++++++++++++++++++++++++++++++++++++ - drivers/mtd/nand/nand_ids.c | 3 +- - include/linux/mtd/nand.h | 2 + - 4 files changed, 164 insertions(+), 2 deletions(-) - create mode 100644 drivers/mtd/nand/nand_hynix.c - ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -5,7 +5,7 @@ - obj-$(CONFIG_MTD_NAND) += nand.o - obj-$(CONFIG_MTD_NAND_ECC) += nand_ecc.o - obj-$(CONFIG_MTD_NAND_BCH) += nand_bch.o --obj-$(CONFIG_MTD_NAND_IDS) += nand_ids.o -+obj-$(CONFIG_MTD_NAND_IDS) += nand_ids.o nand_hynix.o - obj-$(CONFIG_MTD_SM_COMMON) += sm_common.o - - obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nand.o ---- /dev/null -+++ b/drivers/mtd/nand/nand_hynix.c -@@ -0,0 +1,159 @@ -+/* -+ * Copyright (C) 2014 Boris BREZILLON <b.brezillon.dev@gmail.com> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include <linux/module.h> -+#include <linux/mtd/nand.h> -+#include <linux/slab.h> -+ -+static u8 h27ucg8t2a_read_retry_regs[] = { -+ 0xcc, 0xbf, 0xaa, 0xab, 0xcd, 0xad, 0xae, 0xaf -+}; -+ -+struct hynix_read_retry { -+ u8 *regs; -+ u8 values[64]; -+}; -+ -+struct hynix_nand { -+ struct hynix_read_retry read_retry; -+}; -+ -+int nand_setup_read_retry_hynix(struct mtd_info *mtd, int retry_mode) -+{ -+ struct nand_chip *chip = mtd->priv; -+ struct hynix_nand *hynix = chip->manuf_priv; -+ int offset = retry_mode * 8; -+ int status; -+ int i; -+ -+ chip->cmdfunc(mtd, 0x36, -1, -1); -+ for (i = 0; i < 8; i++) { -+ int column = hynix->read_retry.regs[i]; -+ column |= column << 8; -+ chip->cmdfunc(mtd, NAND_CMD_NONE, column, -1); -+ chip->write_byte(mtd, hynix->read_retry.values[offset + i]); -+ } -+ chip->cmdfunc(mtd, 0x16, -1, -1); -+ -+ status = chip->waitfunc(mtd, chip); -+ if (status & NAND_STATUS_FAIL) -+ return -EIO; -+ -+ return 0; -+} -+ -+static void h27ucg8t2a_cleanup(struct mtd_info *mtd) -+{ -+ struct nand_chip *chip = mtd->priv; -+ kfree(chip->manuf_priv); -+} -+ -+static int h27ucg8t2a_init(struct mtd_info *mtd, const uint8_t *id) -+{ -+ struct nand_chip *chip = mtd->priv; -+ struct hynix_nand *hynix; -+ u8 * buf = NULL; -+ int i, j; -+ int ret; -+ -+ buf = kzalloc(1024, GFP_KERNEL); -+ if (!buf) -+ return -ENOMEM; -+ -+ chip->select_chip(mtd, 0); -+ chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); -+ chip->cmdfunc(mtd, 0x36, 0xff, -1); -+ chip->write_byte(mtd, 0x40); -+ chip->cmdfunc(mtd, NAND_CMD_NONE, 0xcc, -1); -+ chip->write_byte(mtd, 0x4d); -+ chip->cmdfunc(mtd, 0x16, -1, -1); -+ chip->cmdfunc(mtd, 0x17, -1, -1); -+ chip->cmdfunc(mtd, 0x04, -1, -1); -+ chip->cmdfunc(mtd, 0x19, -1, -1); -+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0x0, 0x200); -+ -+ chip->read_buf(mtd, buf, 2); -+ if (buf[0] != 0x8 || buf[1] != 0x8) { -+ ret = -EINVAL; -+ goto leave; -+ } -+ chip->read_buf(mtd, buf, 1024); -+ -+ ret = 0; -+ for (j = 0; j < 8; j++) { -+ for (i = 0; i < 64; i++) { -+ u8 *tmp = buf + (128 * j); -+ if ((tmp[i] | tmp[i + 64]) != 0xff) { -+ ret = -EINVAL; -+ goto leave; -+ } -+ } -+ } -+ -+ chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); -+ chip->cmdfunc(mtd, 0x38, -1, -1); -+ chip->select_chip(mtd, -1); -+ -+ if (!ret) { -+ hynix = kzalloc(sizeof(*hynix), GFP_KERNEL); -+ if (!hynix) { -+ ret = -ENOMEM; -+ goto leave; -+ } -+ -+ hynix->read_retry.regs = h27ucg8t2a_read_retry_regs; -+ memcpy(hynix->read_retry.values, buf, 64); -+ chip->manuf_priv = hynix; -+ chip->setup_read_retry = nand_setup_read_retry_hynix; -+ chip->read_retries = 8; -+ chip->manuf_cleanup = h27ucg8t2a_cleanup; -+ } -+ -+leave: -+ kfree(buf); -+ -+ return ret; -+} -+ -+struct hynix_nand_initializer { -+ u8 id[6]; -+ int (*init)(struct mtd_info *mtd, const uint8_t *id); -+}; -+ -+struct hynix_nand_initializer initializers[] = { -+ { -+ .id = {NAND_MFR_HYNIX, 0xde, 0x94, 0xda, 0x74, 0xc4}, -+ .init = h27ucg8t2a_init, -+ }, -+}; -+ -+int hynix_nand_init(struct mtd_info *mtd, const uint8_t *id) -+{ -+ int i; -+ -+ for (i = 0; i < ARRAY_SIZE(initializers); i++) { -+ struct hynix_nand_initializer *initializer = &initializers[i]; -+ if (memcmp(id, initializer->id, sizeof(initializer->id))) -+ continue; -+ -+ return initializer->init(mtd, id); -+ } -+ -+ return 0; -+} -+EXPORT_SYMBOL(hynix_nand_init); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Boris BREZILLON <b.brezillon.dev@gmail.com>"); -+MODULE_DESCRIPTION("Hynix NAND specific code"); ---- a/drivers/mtd/nand/nand_ids.c -+++ b/drivers/mtd/nand/nand_ids.c -@@ -163,6 +163,7 @@ struct nand_flash_dev nand_flash_ids[] = - {NULL} - }; - -+ - /* Manufacturer IDs */ - struct nand_manufacturers nand_manuf_ids[] = { - {NAND_MFR_TOSHIBA, "Toshiba"}, -@@ -171,7 +172,7 @@ struct nand_manufacturers nand_manuf_ids - {NAND_MFR_NATIONAL, "National"}, - {NAND_MFR_RENESAS, "Renesas"}, - {NAND_MFR_STMICRO, "ST Micro"}, -- {NAND_MFR_HYNIX, "Hynix"}, -+ {NAND_MFR_HYNIX, "Hynix", hynix_nand_init}, - {NAND_MFR_MICRON, "Micron"}, - {NAND_MFR_AMD, "AMD/Spansion"}, - {NAND_MFR_MACRONIX, "Macronix"}, ---- a/include/linux/mtd/nand.h -+++ b/include/linux/mtd/nand.h -@@ -959,6 +959,8 @@ struct nand_manufacturers { - extern struct nand_flash_dev nand_flash_ids[]; - extern struct nand_manufacturers nand_manuf_ids[]; - -+int hynix_nand_init(struct mtd_info *mtd, const uint8_t *id); -+ - extern int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd); - extern int nand_default_bbt(struct mtd_info *mtd); - extern int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs); diff --git a/target/linux/sunxi/patches-4.1/119-mtd-nand-ecc-for-samsung.patch b/target/linux/sunxi/patches-4.1/119-mtd-nand-ecc-for-samsung.patch deleted file mode 100644 index bc428f6..0000000 --- a/target/linux/sunxi/patches-4.1/119-mtd-nand-ecc-for-samsung.patch +++ /dev/null @@ -1,68 +0,0 @@ -From 3fecbdac2fe503fb6896ec08dd2474958d198d62 Mon Sep 17 00:00:00 2001 -From: Hans de Goede <hdegoede@redhat.com> -Date: Sun, 24 May 2015 12:01:16 +0200 -Subject: [PATCH] mtd: nand: nand_decode_ext_id(): Fill in ecc strength and - size for Samsung - -On some nand controllers with hw-ecc the controller code wants to know the -ecc strength and size and having these as 0, 0 is not accepted. - -Specifying these in devicetree is possible but undesirable as the nand -may be different in different production runs of the same board, so it -is better to get this info from the nand id where possible. - -This commit adds code to read the ecc strength and size from the nand for -Samsung extended-id nands. This code is based on the info for the 5th -id byte in the datasheets for the following Samsung nands: K9GAG08U0E, -K9GAG08U0F, K9GAG08X0D, K9GBG08U0A, K9GBG08U0B. These all use these bits -in the exact same way. - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - drivers/mtd/nand/nand_base.c | 35 +++++++++++++++++++++++++++++++++++ - 1 file changed, 35 insertions(+) - ---- a/drivers/mtd/nand/nand_base.c -+++ b/drivers/mtd/nand/nand_base.c -@@ -4063,6 +4063,41 @@ static void nand_decode_ext_id(struct mt - mtd->erasesize = (128 * 1024) << - (((extid >> 1) & 0x04) | (extid & 0x03)); - *busw = 0; -+ /* Calc ecc strength and size from 5th id byte*/ -+ switch ((id_data[4] >> 4) & 0x07) { -+ case 0: -+ chip->ecc_strength_ds = 1; -+ chip->ecc_step_ds = 512; -+ break; -+ case 1: -+ chip->ecc_strength_ds = 2; -+ chip->ecc_step_ds = 512; -+ break; -+ case 2: -+ chip->ecc_strength_ds = 4; -+ chip->ecc_step_ds = 512; -+ break; -+ case 3: -+ chip->ecc_strength_ds = 8; -+ chip->ecc_step_ds = 512; -+ break; -+ case 4: -+ chip->ecc_strength_ds = 16; -+ chip->ecc_step_ds = 512; -+ break; -+ case 5: -+ chip->ecc_strength_ds = 24; -+ chip->ecc_step_ds = 1024; -+ break; -+ case 6: -+ chip->ecc_strength_ds = 40; -+ chip->ecc_step_ds = 1024; -+ break; -+ case 7: -+ chip->ecc_strength_ds = 60; -+ chip->ecc_step_ds = 1024; -+ break; -+ } - } else if (id_len == 6 && id_data[0] == NAND_MFR_HYNIX && - !nand_is_slc(chip)) { - unsigned int tmp; diff --git a/target/linux/sunxi/patches-4.1/120-mtd-nand-print-ecc-strength.patch b/target/linux/sunxi/patches-4.1/120-mtd-nand-print-ecc-strength.patch deleted file mode 100644 index 186ce2e..0000000 --- a/target/linux/sunxi/patches-4.1/120-mtd-nand-print-ecc-strength.patch +++ /dev/null @@ -1,29 +0,0 @@ -From ec6cde9ea451ffa94b4d0ccbbcbe15c0d35f73d8 Mon Sep 17 00:00:00 2001 -From: Hans de Goede <hdegoede@redhat.com> -Date: Mon, 25 May 2015 12:57:48 +0200 -Subject: [PATCH] mtd: nand: nand_get_flash_type: Print detected ECC strength - and size - -Print the detected ECC strength and size from nand_get_flash_type(). - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - drivers/mtd/nand/nand_base.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - ---- a/drivers/mtd/nand/nand_base.c -+++ b/drivers/mtd/nand/nand_base.c -@@ -4437,9 +4437,11 @@ ident_done: - pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, - type->name); - -- pr_info("%d MiB, %s, erase size: %d KiB, page size: %d, OOB size: %d\n", -+ pr_info("%d MiB, %s, erase size: %d KiB, page size: %d, " -+ "OOB size: %d, ECC strength %d size %d\n", - (int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC", -- mtd->erasesize >> 10, mtd->writesize, mtd->oobsize); -+ mtd->erasesize >> 10, mtd->writesize, mtd->oobsize, -+ chip->ecc_strength_ds, chip->ecc_step_ds); - return type; - } - diff --git a/target/linux/sunxi/patches-4.1/121-mtd-print-full-chipid.patch b/target/linux/sunxi/patches-4.1/121-mtd-print-full-chipid.patch deleted file mode 100644 index 3e293a9..0000000 --- a/target/linux/sunxi/patches-4.1/121-mtd-print-full-chipid.patch +++ /dev/null @@ -1,67 +0,0 @@ -From fb177d5b534f263735dc6955703e3c711b950f35 Mon Sep 17 00:00:00 2001 -From: Michal Suchanek <hramrach@gmail.com> -Date: Thu, 1 Jan 2015 00:57:46 +0100 -Subject: [PATCH] mtd: nand: print full chip ID - -Full chip ID is printed so user has data to paste from syslog in case -of chip misidentification. - -Signed-off-by: Michal Suchanek <hramrach@gmail.com> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - drivers/mtd/nand/nand_base.c | 23 ++++++++++++++++++----- - 1 file changed, 18 insertions(+), 5 deletions(-) - ---- a/drivers/mtd/nand/nand_base.c -+++ b/drivers/mtd/nand/nand_base.c -@@ -4247,7 +4247,7 @@ static inline bool is_full_id_nand(struc - } - - static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip, -- struct nand_flash_dev *type, u8 *id_data, int *busw) -+ struct nand_flash_dev *type, const u8 *id_data, int *busw) - { - if (!strncmp(type->id, id_data, type->id_len)) { - mtd->writesize = type->pagesize; -@@ -4273,6 +4273,21 @@ static bool find_full_id_nand(struct mtd - } - - /* -+ * Print full detail of chip ID read from chip. -+ */ -+static void print_nand_chip_info(int maf_id, int dev_id, u8 id_data[8]) -+{ -+ u8 delim[8] = { [0 ... 7] = ',' }; -+ pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n", maf_id, dev_id); -+ delim[7] = ' '; -+ delim[nand_id_len(id_data, 8) - 1] = ';'; -+ /* This sucks. Kernel seems to insert newline after every other printk so format in one go. */ -+ pr_info("chip id data: 0x%02x%c 0x%02x%c 0x%02x%c 0x%02x%c 0x%02x%c 0x%02x%c 0x%02x%c 0x%02x%c\n", -+ id_data[0], delim[0], id_data[1], delim[1], id_data[2], delim[2], id_data[3], delim[3], -+ id_data[4], delim[4], id_data[5], delim[5], id_data[6], delim[6], id_data[7], delim[7]); -+} -+ -+/* - * Get the flash and manufacturer id and lookup if the type is supported. - */ - static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, -@@ -4385,8 +4400,7 @@ ident_done: - * Check, if buswidth is correct. Hardware drivers should set - * chip correct! - */ -- pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n", -- *maf_id, *dev_id); -+ print_nand_chip_info(*maf_id, *dev_id, id_data); - pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, mtd->name); - pr_warn("bus width %d instead %d bit\n", - (chip->options & NAND_BUSWIDTH_16) ? 16 : 8, -@@ -4424,8 +4438,7 @@ ident_done: - return ERR_PTR(err); - } - -- pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n", -- *maf_id, *dev_id); -+ print_nand_chip_info(*maf_id, *dev_id, id_data); - - if (chip->onfi_version) - pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, diff --git a/target/linux/sunxi/patches-4.1/122-mtd-nand-sunxi-add-partition-support.patch b/target/linux/sunxi/patches-4.1/122-mtd-nand-sunxi-add-partition-support.patch deleted file mode 100644 index cdf5738..0000000 --- a/target/linux/sunxi/patches-4.1/122-mtd-nand-sunxi-add-partition-support.patch +++ /dev/null @@ -1,160 +0,0 @@ -From 5cb31780791d0f6b68e3712f1b35f1a28c47add0 Mon Sep 17 00:00:00 2001 -From: Boris Brezillon <boris.brezillon@free-electrons.com> -Date: Tue, 21 Oct 2014 14:37:15 +0200 -Subject: [PATCH] mtd: nand: sunxi: Add NAND partition support - -Add NAND partition support to the sunxi_nand driver. - -Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - drivers/mtd/nand/Kconfig | 1 + - drivers/mtd/nand/sunxi_nand.c | 73 +++++++++++++++++++++++++++++++++++++------ - 2 files changed, 65 insertions(+), 9 deletions(-) - ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -525,6 +525,7 @@ config MTD_NAND_XWAY - config MTD_NAND_SUNXI - tristate "Support for NAND on Allwinner SoCs" - depends on ARCH_SUNXI -+ select MTD_OF_NAND_PARTS - help - Enables support for NAND Flash chips on Allwinner SoCs. - ---- a/drivers/mtd/nand/sunxi_nand.c -+++ b/drivers/mtd/nand/sunxi_nand.c -@@ -206,6 +206,23 @@ struct sunxi_nand_hw_ecc { - }; - - /* -+ * sunxi NAND partition structure: stores NAND partitions information -+ * -+ * @part: base paritition structure -+ * @ecc: per-partition ECC info -+ */ -+struct sunxi_nand_part { -+ struct nand_part part; -+ struct nand_ecc_ctrl ecc; -+}; -+ -+static inline struct sunxi_nand_part * -+to_sunxi_nand_part(struct nand_part *part) -+{ -+ return container_of(part, struct sunxi_nand_part, part); -+} -+ -+/* - * NAND chip structure: stores NAND chip device related information - * - * @node: used to store NAND chips into a list -@@ -525,7 +542,7 @@ static int sunxi_nfc_hw_ecc_read_page(st - int oob_required, int page) - { - struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller); -- struct nand_ecc_ctrl *ecc = &chip->ecc; -+ struct nand_ecc_ctrl *ecc = chip->cur_ecc; - struct nand_ecclayout *layout = ecc->layout; - struct sunxi_nand_hw_ecc *data = ecc->priv; - unsigned int max_bitflips = 0; -@@ -611,7 +628,7 @@ static int sunxi_nfc_hw_ecc_write_page(s - const uint8_t *buf, int oob_required) - { - struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller); -- struct nand_ecc_ctrl *ecc = &chip->ecc; -+ struct nand_ecc_ctrl *ecc = chip->cur_ecc; - struct nand_ecclayout *layout = ecc->layout; - struct sunxi_nand_hw_ecc *data = ecc->priv; - int offset; -@@ -679,7 +696,7 @@ static int sunxi_nfc_hw_syndrome_ecc_rea - int page) - { - struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller); -- struct nand_ecc_ctrl *ecc = &chip->ecc; -+ struct nand_ecc_ctrl *ecc = chip->cur_ecc; - struct sunxi_nand_hw_ecc *data = ecc->priv; - unsigned int max_bitflips = 0; - uint8_t *oob = chip->oob_poi; -@@ -747,7 +764,7 @@ static int sunxi_nfc_hw_syndrome_ecc_wri - int oob_required) - { - struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller); -- struct nand_ecc_ctrl *ecc = &chip->ecc; -+ struct nand_ecc_ctrl *ecc = chip->cur_ecc; - struct sunxi_nand_hw_ecc *data = ecc->priv; - uint8_t *oob = chip->oob_poi; - int offset = 0; -@@ -1091,8 +1108,13 @@ static int sunxi_nand_ecc_init(struct mt - ecc->strength = nand->ecc_strength_ds; - } - -- if (!ecc->size || !ecc->strength) -- return -EINVAL; -+ if (!ecc->size || !ecc->strength) { -+ if (ecc == &nand->ecc) -+ return -EINVAL; -+ -+ ecc->size = nand->ecc.size; -+ ecc->strength = nand->ecc.strength; -+ } - - ecc->mode = NAND_ECC_HW; - -@@ -1127,12 +1149,39 @@ static int sunxi_nand_ecc_init(struct mt - return 0; - } - -+static void sunxi_nand_part_release(struct nand_part *part) -+{ -+ kfree(to_sunxi_nand_part(part)); -+} -+ -+struct nand_part *sunxi_ofnandpart_parse(void *priv, struct mtd_info *master, -+ struct device_node *pp) -+{ -+ struct sunxi_nand_part *part; -+ int ret; -+ -+ part = kzalloc(sizeof(*part), GFP_KERNEL); -+ part->part.release = sunxi_nand_part_release; -+ -+ ret = sunxi_nand_ecc_init(master, &part->ecc, pp); -+ if (ret) -+ goto err; -+ -+ part->part.ecc = &part->ecc; -+ -+ return &part->part; -+ -+err: -+ kfree(part); -+ return ERR_PTR(ret); -+} -+ - static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc, - struct device_node *np) - { - const struct nand_sdr_timings *timings; - struct sunxi_nand_chip *chip; -- struct mtd_part_parser_data ppdata; -+ struct ofnandpart_data ppdata; - struct mtd_info *mtd; - struct nand_chip *nand; - int nsels; -@@ -1261,8 +1310,14 @@ static int sunxi_nand_chip_init(struct d - return ret; - } - -- ppdata.of_node = np; -- ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0); -+ ppdata.node = np; -+ ppdata.parse = sunxi_ofnandpart_parse; -+ ret = ofnandpart_parse(mtd, &ppdata); -+ if (!ret) -+ ret = mtd_device_register(mtd, NULL, 0); -+ else if (ret > 0) -+ ret = 0; -+ - if (ret) { - dev_err(dev, "failed to register mtd device: %d\n", ret); - nand_release(mtd); diff --git a/target/linux/sunxi/patches-4.1/123-mtd-nand-sunxi-add-hw-randomizer-support.patch b/target/linux/sunxi/patches-4.1/123-mtd-nand-sunxi-add-hw-randomizer-support.patch deleted file mode 100644 index 4590b8f..0000000 --- a/target/linux/sunxi/patches-4.1/123-mtd-nand-sunxi-add-hw-randomizer-support.patch +++ /dev/null @@ -1,887 +0,0 @@ -From ef4bc8ab68979e5c1c30f061c5af1a7d6ec8eb52 Mon Sep 17 00:00:00 2001 -From: Boris Brezillon <boris.brezillon@free-electrons.com> -Date: Tue, 21 Oct 2014 14:40:42 +0200 -Subject: [PATCH] mtd: nand: sunxi: Add HW randomizer support - -Add support for the HW randomizer available on the sunxi nand controller. - -Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - drivers/mtd/nand/sunxi_nand.c | 603 ++++++++++++++++++++++++++++++++++++++++-- - 1 file changed, 585 insertions(+), 18 deletions(-) - ---- a/drivers/mtd/nand/sunxi_nand.c -+++ b/drivers/mtd/nand/sunxi_nand.c -@@ -210,10 +210,12 @@ struct sunxi_nand_hw_ecc { - * - * @part: base paritition structure - * @ecc: per-partition ECC info -+ * @rnd: per-partition randomizer info - */ - struct sunxi_nand_part { - struct nand_part part; - struct nand_ecc_ctrl ecc; -+ struct nand_rnd_ctrl rnd; - }; - - static inline struct sunxi_nand_part * -@@ -223,6 +225,29 @@ to_sunxi_nand_part(struct nand_part *par - } - - /* -+ * sunxi NAND randomizer structure: stores NAND randomizer information -+ * -+ * @page: current page -+ * @column: current column -+ * @nseeds: seed table size -+ * @seeds: seed table -+ * @subseeds: pre computed sub seeds -+ * @step: step function -+ * @left: number of remaining bytes in the page -+ * @state: current randomizer state -+ */ -+struct sunxi_nand_hw_rnd { -+ int page; -+ int column; -+ int nseeds; -+ u16 *seeds; -+ u16 *subseeds; -+ u16 (*step)(struct mtd_info *mtd, u16 state, int column, int *left); -+ int left; -+ u16 state; -+}; -+ -+/* - * NAND chip structure: stores NAND chip device related information - * - * @node: used to store NAND chips into a list -@@ -237,6 +262,7 @@ struct sunxi_nand_chip { - struct list_head node; - struct nand_chip nand; - struct mtd_info mtd; -+ void *buffer; - unsigned long clk_rate; - int selected; - int nsels; -@@ -493,6 +519,185 @@ static void sunxi_nfc_write_buf(struct m - } - } - -+static u16 sunxi_nfc_hwrnd_step(struct sunxi_nand_hw_rnd *rnd, u16 state, int count) -+{ -+ state &= 0x7fff; -+ count *= 8; -+ while (count--) -+ state = ((state >> 1) | -+ ((((state >> 0) ^ (state >> 1)) & 1) << 14)) & 0x7fff; -+ -+ return state; -+} -+ -+static u16 sunxi_nfc_hwrnd_single_step(u16 state, int count) -+{ -+ state &= 0x7fff; -+ while (count--) -+ state = ((state >> 1) | -+ ((((state >> 0) ^ (state >> 1)) & 1) << 14)) & 0x7fff; -+ -+ return state; -+} -+ -+static int sunxi_nfc_hwrnd_config(struct mtd_info *mtd, int page, int column, -+ enum nand_rnd_action action) -+{ -+ struct nand_chip *nand = mtd->priv; -+ struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand); -+ struct sunxi_nand_hw_rnd *rnd = nand->cur_rnd->priv; -+ u16 state; -+ -+ if (page < 0 && column < 0) { -+ rnd->page = -1; -+ rnd->column = -1; -+ return 0; -+ } -+ -+ if (column < 0) -+ column = 0; -+ if (page < 0) -+ page = rnd->page; -+ -+ if (page < 0) -+ return -EINVAL; -+ -+ if (page != rnd->page && action == NAND_RND_READ) { -+ int status; -+ -+ status = nand_page_get_status(mtd, page); -+ if (status == NAND_PAGE_STATUS_UNKNOWN) { -+ nand->cmdfunc(mtd, NAND_CMD_RNDOUT, 0, -1); -+ sunxi_nfc_read_buf(mtd, sunxi_nand->buffer, -+ mtd->writesize + mtd->oobsize); -+ -+ if (nand_page_is_empty(mtd, sunxi_nand->buffer, -+ sunxi_nand->buffer + -+ mtd->writesize)) -+ status = NAND_PAGE_EMPTY; -+ else -+ status = NAND_PAGE_FILLED; -+ -+ nand_page_set_status(mtd, page, status); -+ nand->cmdfunc(mtd, NAND_CMD_RNDOUT, column, -1); -+ } -+ } -+ -+ state = rnd->seeds[page % rnd->nseeds]; -+ rnd->page = page; -+ rnd->column = column; -+ -+ if (rnd->step) { -+ rnd->state = rnd->step(mtd, state, column, &rnd->left); -+ } else { -+ rnd->state = sunxi_nfc_hwrnd_step(rnd, state, column % 4096); -+ rnd->left = mtd->oobsize + mtd->writesize - column; -+ } -+ -+ return 0; -+} -+ -+static void sunxi_nfc_hwrnd_write_buf(struct mtd_info *mtd, const uint8_t *buf, -+ int len) -+{ -+ struct nand_chip *nand = mtd->priv; -+ struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller); -+ struct sunxi_nand_hw_rnd *rnd = nand->cur_rnd->priv; -+ u32 tmp = readl(nfc->regs + NFC_REG_ECC_CTL); -+ int cnt; -+ int offs = 0; -+ int rndactiv; -+ -+ tmp &= ~(NFC_RANDOM_DIRECTION | NFC_RANDOM_SEED | NFC_RANDOM_EN); -+ writel(tmp, nfc->regs + NFC_REG_ECC_CTL); -+ -+ if (rnd->page < 0) { -+ sunxi_nfc_write_buf(mtd, buf, len); -+ return; -+ } -+ -+ while (len > offs) { -+ cnt = len - offs; -+ if (cnt > 1024) -+ cnt = 1024; -+ -+ rndactiv = nand_rnd_is_activ(mtd, rnd->page, rnd->column, -+ &cnt); -+ if (rndactiv > 0) { -+ writel(tmp | NFC_RANDOM_EN | (rnd->state << 16), -+ nfc->regs + NFC_REG_ECC_CTL); -+ if (rnd->left < cnt) -+ cnt = rnd->left; -+ } -+ -+ sunxi_nfc_write_buf(mtd, buf + offs, cnt); -+ -+ if (rndactiv > 0) -+ writel(tmp & ~NFC_RANDOM_EN, -+ nfc->regs + NFC_REG_ECC_CTL); -+ -+ offs += cnt; -+ if (len <= offs) -+ break; -+ -+ sunxi_nfc_hwrnd_config(mtd, -1, rnd->column + cnt, NAND_RND_WRITE); -+ } -+} -+ -+static void sunxi_nfc_hwrnd_read_buf(struct mtd_info *mtd, uint8_t *buf, -+ int len) -+{ -+ struct nand_chip *nand = mtd->priv; -+ struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller); -+ struct sunxi_nand_hw_rnd *rnd = nand->cur_rnd->priv; -+ u32 tmp = readl(nfc->regs + NFC_REG_ECC_CTL); -+ int cnt; -+ int offs = 0; -+ int rndactiv; -+ -+ tmp &= ~(NFC_RANDOM_DIRECTION | NFC_RANDOM_SEED | NFC_RANDOM_EN); -+ writel(tmp, nfc->regs + NFC_REG_ECC_CTL); -+ -+ if (rnd->page < 0) { -+ sunxi_nfc_read_buf(mtd, buf, len); -+ return; -+ } -+ -+ while (len > offs) { -+ cnt = len - offs; -+ if (cnt > 1024) -+ cnt = 1024; -+ -+ if (nand_page_get_status(mtd, rnd->page) != NAND_PAGE_EMPTY && -+ nand_rnd_is_activ(mtd, rnd->page, rnd->column, &cnt) > 0) -+ rndactiv = 1; -+ else -+ rndactiv = 0; -+ -+ if (rndactiv > 0) { -+ writel(tmp | NFC_RANDOM_EN | (rnd->state << 16), -+ nfc->regs + NFC_REG_ECC_CTL); -+ if (rnd->left < cnt) -+ cnt = rnd->left; -+ } -+ -+ if (buf) -+ sunxi_nfc_read_buf(mtd, buf + offs, cnt); -+ else -+ sunxi_nfc_read_buf(mtd, NULL, cnt); -+ -+ if (rndactiv > 0) -+ writel(tmp & ~NFC_RANDOM_EN, -+ nfc->regs + NFC_REG_ECC_CTL); -+ -+ offs += cnt; -+ if (len <= offs) -+ break; -+ -+ sunxi_nfc_hwrnd_config(mtd, -1, rnd->column + cnt, NAND_RND_READ); -+ } -+} -+ - static uint8_t sunxi_nfc_read_byte(struct mtd_info *mtd) - { - uint8_t ret; -@@ -542,16 +747,43 @@ static int sunxi_nfc_hw_ecc_read_page(st - int oob_required, int page) - { - struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller); -+ struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(chip); - struct nand_ecc_ctrl *ecc = chip->cur_ecc; - struct nand_ecclayout *layout = ecc->layout; - struct sunxi_nand_hw_ecc *data = ecc->priv; - unsigned int max_bitflips = 0; -+ int status; - int offset; - int ret; - u32 tmp; - int i; - int cnt; - -+ status = nand_page_get_status(mtd, page); -+ if (status == NAND_PAGE_STATUS_UNKNOWN) { -+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, 0, -1); -+ sunxi_nfc_read_buf(mtd, sunxi_nand->buffer, -+ mtd->writesize + mtd->oobsize); -+ -+ if (nand_page_is_empty(mtd, sunxi_nand->buffer, -+ sunxi_nand->buffer + -+ mtd->writesize)) { -+ status = NAND_PAGE_EMPTY; -+ } else { -+ status = NAND_PAGE_FILLED; -+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, 0, -1); -+ } -+ -+ nand_page_set_status(mtd, page, status); -+ } -+ -+ if (status == NAND_PAGE_EMPTY) { -+ memset(buf, 0xff, mtd->writesize); -+ if (oob_required) -+ memset(chip->oob_poi, 0xff, mtd->oobsize); -+ return 0; -+ } -+ - tmp = readl(nfc->regs + NFC_REG_ECC_CTL); - tmp &= ~(NFC_ECC_MODE | NFC_ECC_PIPELINE | NFC_ECC_BLOCK_SIZE); - tmp |= NFC_ECC_EN | (data->mode << NFC_ECC_MODE_SHIFT) | -@@ -560,12 +792,15 @@ static int sunxi_nfc_hw_ecc_read_page(st - writel(tmp, nfc->regs + NFC_REG_ECC_CTL); - - for (i = 0; i < ecc->steps; i++) { -+ bool rndactiv = false; -+ - if (i) - chip->cmdfunc(mtd, NAND_CMD_RNDOUT, i * ecc->size, -1); - - offset = mtd->writesize + layout->eccpos[i * ecc->bytes] - 4; - -- chip->read_buf(mtd, NULL, ecc->size); -+ nand_rnd_config(mtd, page, i * ecc->size, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, NULL, ecc->size); - - chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1); - -@@ -573,6 +808,25 @@ static int sunxi_nfc_hw_ecc_read_page(st - if (ret) - return ret; - -+ if (i) { -+ cnt = ecc->bytes + 4; -+ if (nand_rnd_is_activ(mtd, page, offset, &cnt) > 0 && -+ cnt == ecc->bytes + 4) -+ rndactiv = true; -+ } else { -+ cnt = ecc->bytes + 2; -+ if (nand_rnd_is_activ(mtd, page, offset + 2, &cnt) > 0 && -+ cnt == ecc->bytes + 2) -+ rndactiv = true; -+ } -+ -+ if (rndactiv) { -+ tmp = readl(nfc->regs + NFC_REG_ECC_CTL); -+ tmp &= ~(NFC_RANDOM_DIRECTION | NFC_ECC_EXCEPTION); -+ tmp |= NFC_RANDOM_EN; -+ writel(tmp, nfc->regs + NFC_REG_ECC_CTL); -+ } -+ - tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | (1 << 30); - writel(tmp, nfc->regs + NFC_REG_CMD); - -@@ -583,6 +837,9 @@ static int sunxi_nfc_hw_ecc_read_page(st - memcpy_fromio(buf + (i * ecc->size), - nfc->regs + NFC_RAM0_BASE, ecc->size); - -+ writel(readl(nfc->regs + NFC_REG_ECC_CTL) & ~NFC_RANDOM_EN, -+ nfc->regs + NFC_REG_ECC_CTL); -+ - if (readl(nfc->regs + NFC_REG_ECC_ST) & 0x1) { - mtd->ecc_stats.failed++; - } else { -@@ -598,9 +855,10 @@ static int sunxi_nfc_hw_ecc_read_page(st - if (ret) - return ret; - -+ nand_rnd_config(mtd, -1, offset, NAND_RND_READ); - offset -= mtd->writesize; -- chip->read_buf(mtd, chip->oob_poi + offset, -- ecc->bytes + 4); -+ nand_rnd_read_buf(mtd, chip->oob_poi + offset, -+ ecc->bytes + 4); - } - } - -@@ -610,11 +868,14 @@ static int sunxi_nfc_hw_ecc_read_page(st - offset = mtd->writesize + - ecc->layout->oobfree[ecc->steps].offset; - chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1); -+ nand_rnd_config(mtd, -1, offset, NAND_RND_READ); - offset -= mtd->writesize; -- chip->read_buf(mtd, chip->oob_poi + offset, cnt); -+ nand_rnd_read_buf(mtd, chip->oob_poi + offset, cnt); - } - } - -+ nand_rnd_config(mtd, -1, -1, NAND_RND_READ); -+ - tmp = readl(nfc->regs + NFC_REG_ECC_CTL); - tmp &= ~NFC_ECC_EN; - -@@ -631,6 +892,7 @@ static int sunxi_nfc_hw_ecc_write_page(s - struct nand_ecc_ctrl *ecc = chip->cur_ecc; - struct nand_ecclayout *layout = ecc->layout; - struct sunxi_nand_hw_ecc *data = ecc->priv; -+ struct sunxi_nand_hw_rnd *rnd = chip->cur_rnd->priv; - int offset; - int ret; - u32 tmp; -@@ -645,17 +907,57 @@ static int sunxi_nfc_hw_ecc_write_page(s - writel(tmp, nfc->regs + NFC_REG_ECC_CTL); - - for (i = 0; i < ecc->steps; i++) { -+ bool rndactiv = false; -+ u8 oob_buf[4]; -+ - if (i) - chip->cmdfunc(mtd, NAND_CMD_RNDIN, i * ecc->size, -1); - -- chip->write_buf(mtd, buf + (i * ecc->size), ecc->size); -+ nand_rnd_config(mtd, -1, i * ecc->size, NAND_RND_WRITE); -+ nand_rnd_write_buf(mtd, buf + (i * ecc->size), ecc->size); - - offset = layout->eccpos[i * ecc->bytes] - 4 + mtd->writesize; - - /* Fill OOB data in */ -- writel(NFC_BUF_TO_USER_DATA(chip->oob_poi + -- layout->oobfree[i].offset), -- nfc->regs + NFC_REG_USER_DATA_BASE); -+ if (!oob_required) -+ memset(oob_buf, 0xff, 4); -+ else -+ memcpy(oob_buf, -+ chip->oob_poi + layout->oobfree[i].offset, -+ 4); -+ -+ -+ memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, oob_buf, 4); -+ -+ if (i) { -+ cnt = ecc->bytes + 4; -+ if (rnd && -+ nand_rnd_is_activ(mtd, -1, offset, &cnt) > 0 && -+ cnt == ecc->bytes + 4) -+ rndactiv = true; -+ } else { -+ cnt = ecc->bytes + 2; -+ if (rnd && -+ nand_rnd_is_activ(mtd, -1, offset + 2, &cnt) > 0 && -+ cnt == ecc->bytes + 2) -+ rndactiv = true; -+ } -+ -+ if (rndactiv) { -+ /* pre randomize to generate FF patterns on the NAND */ -+ if (!i) { -+ u16 state = rnd->subseeds[rnd->page % rnd->nseeds]; -+ state = sunxi_nfc_hwrnd_single_step(state, 15); -+ oob_buf[0] ^= state; -+ state = sunxi_nfc_hwrnd_step(rnd, state, 1); -+ oob_buf[1] ^= state; -+ memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, oob_buf, 4); -+ } -+ tmp = readl(nfc->regs + NFC_REG_ECC_CTL); -+ tmp &= ~(NFC_RANDOM_DIRECTION | NFC_ECC_EXCEPTION); -+ tmp |= NFC_RANDOM_EN; -+ writel(tmp, nfc->regs + NFC_REG_ECC_CTL); -+ } - - chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1); - -@@ -669,6 +971,9 @@ static int sunxi_nfc_hw_ecc_write_page(s - ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0); - if (ret) - return ret; -+ -+ writel(readl(nfc->regs + NFC_REG_ECC_CTL) & ~NFC_RANDOM_EN, -+ nfc->regs + NFC_REG_ECC_CTL); - } - - if (oob_required) { -@@ -677,11 +982,14 @@ static int sunxi_nfc_hw_ecc_write_page(s - offset = mtd->writesize + - ecc->layout->oobfree[i].offset; - chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1); -+ nand_rnd_config(mtd, -1, offset, NAND_RND_WRITE); - offset -= mtd->writesize; -- chip->write_buf(mtd, chip->oob_poi + offset, cnt); -+ nand_rnd_write_buf(mtd, chip->oob_poi + offset, cnt); - } - } - -+ nand_rnd_config(mtd, -1, -1, NAND_RND_WRITE); -+ - tmp = readl(nfc->regs + NFC_REG_ECC_CTL); - tmp &= ~NFC_ECC_EN; - -@@ -690,22 +998,76 @@ static int sunxi_nfc_hw_ecc_write_page(s - return 0; - } - -+static u16 sunxi_nfc_hw_ecc_rnd_steps(struct mtd_info *mtd, u16 state, -+ int column, int *left) -+{ -+ struct nand_chip *chip = mtd->priv; -+ struct nand_ecc_ctrl *ecc = chip->cur_ecc; -+ struct sunxi_nand_hw_rnd *rnd = chip->cur_rnd->priv; -+ int nblks = mtd->writesize / ecc->size; -+ int modsize = ecc->size; -+ int steps; -+ -+ if (column < mtd->writesize) { -+ steps = column % modsize; -+ *left = modsize - steps; -+ } else if (column < mtd->writesize + -+ (nblks * (ecc->bytes + 4))) { -+ column -= mtd->writesize; -+ steps = column % (ecc->bytes + 4); -+ *left = ecc->bytes + 4 - steps; -+ state = rnd->subseeds[rnd->page % rnd->nseeds]; -+ } else { -+ steps = column % 4096; -+ *left = mtd->writesize + mtd->oobsize - column; -+ } -+ -+ return sunxi_nfc_hwrnd_step(rnd, state, steps); -+} -+ - static int sunxi_nfc_hw_syndrome_ecc_read_page(struct mtd_info *mtd, - struct nand_chip *chip, - uint8_t *buf, int oob_required, - int page) - { - struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller); -+ struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(chip); - struct nand_ecc_ctrl *ecc = chip->cur_ecc; - struct sunxi_nand_hw_ecc *data = ecc->priv; - unsigned int max_bitflips = 0; - uint8_t *oob = chip->oob_poi; - int offset = 0; - int ret; -+ int status; - int cnt; - u32 tmp; - int i; - -+ status = nand_page_get_status(mtd, page); -+ if (status == NAND_PAGE_STATUS_UNKNOWN) { -+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, 0, -1); -+ sunxi_nfc_read_buf(mtd, sunxi_nand->buffer, -+ mtd->writesize + mtd->oobsize); -+ -+ if (nand_page_is_empty(mtd, sunxi_nand->buffer, -+ sunxi_nand->buffer + -+ mtd->writesize)) { -+ status = NAND_PAGE_EMPTY; -+ } else { -+ status = NAND_PAGE_FILLED; -+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, 0, -1); -+ } -+ -+ nand_page_set_status(mtd, page, status); -+ } -+ -+ if (status == NAND_PAGE_EMPTY) { -+ memset(buf, 0xff, mtd->writesize); -+ if (oob_required) -+ memset(chip->oob_poi, 0xff, mtd->oobsize); -+ return 0; -+ } -+ - tmp = readl(nfc->regs + NFC_REG_ECC_CTL); - tmp &= ~(NFC_ECC_MODE | NFC_ECC_PIPELINE | NFC_ECC_BLOCK_SIZE); - tmp |= NFC_ECC_EN | (data->mode << NFC_ECC_MODE_SHIFT) | -@@ -714,7 +1076,17 @@ static int sunxi_nfc_hw_syndrome_ecc_rea - writel(tmp, nfc->regs + NFC_REG_ECC_CTL); - - for (i = 0; i < ecc->steps; i++) { -- chip->read_buf(mtd, NULL, ecc->size); -+ nand_rnd_config(mtd, page, offset, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, NULL, ecc->size); -+ -+ cnt = ecc->bytes + 4; -+ if (nand_rnd_is_activ(mtd, page, offset, &cnt) > 0 && -+ cnt == ecc->bytes + 4) { -+ tmp = readl(nfc->regs + NFC_REG_ECC_CTL); -+ tmp &= ~(NFC_RANDOM_DIRECTION | NFC_ECC_EXCEPTION); -+ tmp |= NFC_RANDOM_EN; -+ writel(tmp, nfc->regs + NFC_REG_ECC_CTL); -+ } - - tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | (1 << 30); - writel(tmp, nfc->regs + NFC_REG_CMD); -@@ -727,6 +1099,9 @@ static int sunxi_nfc_hw_syndrome_ecc_rea - buf += ecc->size; - offset += ecc->size; - -+ writel(readl(nfc->regs + NFC_REG_ECC_CTL) & ~NFC_RANDOM_EN, -+ nfc->regs + NFC_REG_ECC_CTL); -+ - if (readl(nfc->regs + NFC_REG_ECC_ST) & 0x1) { - mtd->ecc_stats.failed++; - } else { -@@ -737,7 +1112,8 @@ static int sunxi_nfc_hw_syndrome_ecc_rea - - if (oob_required) { - chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1); -- chip->read_buf(mtd, oob, ecc->bytes + ecc->prepad); -+ nand_rnd_config(mtd, -1, offset, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, oob, ecc->bytes + ecc->prepad); - oob += ecc->bytes + ecc->prepad; - } - -@@ -748,10 +1124,13 @@ static int sunxi_nfc_hw_syndrome_ecc_rea - cnt = mtd->oobsize - (oob - chip->oob_poi); - if (cnt > 0) { - chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1); -- chip->read_buf(mtd, oob, cnt); -+ nand_rnd_config(mtd, page, offset, NAND_RND_READ); -+ nand_rnd_read_buf(mtd, oob, cnt); - } - } - -+ nand_rnd_config(mtd, -1, -1, NAND_RND_READ); -+ - writel(readl(nfc->regs + NFC_REG_ECC_CTL) & ~NFC_ECC_EN, - nfc->regs + NFC_REG_ECC_CTL); - -@@ -766,6 +1145,7 @@ static int sunxi_nfc_hw_syndrome_ecc_wri - struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller); - struct nand_ecc_ctrl *ecc = chip->cur_ecc; - struct sunxi_nand_hw_ecc *data = ecc->priv; -+ struct sunxi_nand_hw_rnd *rnd = chip->cur_rnd->priv; - uint8_t *oob = chip->oob_poi; - int offset = 0; - int ret; -@@ -781,13 +1161,24 @@ static int sunxi_nfc_hw_syndrome_ecc_wri - writel(tmp, nfc->regs + NFC_REG_ECC_CTL); - - for (i = 0; i < ecc->steps; i++) { -- chip->write_buf(mtd, buf + (i * ecc->size), ecc->size); -+ nand_rnd_config(mtd, -1, offset, NAND_RND_WRITE); -+ nand_rnd_write_buf(mtd, buf + (i * ecc->size), ecc->size); - offset += ecc->size; - - /* Fill OOB data in */ - writel(NFC_BUF_TO_USER_DATA(oob), - nfc->regs + NFC_REG_USER_DATA_BASE); - -+ cnt = ecc->bytes + 4; -+ if (rnd && -+ nand_rnd_is_activ(mtd, rnd->page, offset, &cnt) > 0 && -+ cnt == ecc->bytes + 4) { -+ tmp = readl(nfc->regs + NFC_REG_ECC_CTL); -+ tmp &= ~(NFC_RANDOM_DIRECTION | NFC_ECC_EXCEPTION); -+ tmp |= NFC_RANDOM_EN; -+ writel(tmp, nfc->regs + NFC_REG_ECC_CTL); -+ } -+ - tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | NFC_ACCESS_DIR | - (1 << 30); - writel(tmp, nfc->regs + NFC_REG_CMD); -@@ -796,6 +1187,9 @@ static int sunxi_nfc_hw_syndrome_ecc_wri - if (ret) - return ret; - -+ writel(readl(nfc->regs + NFC_REG_ECC_CTL) & ~NFC_RANDOM_EN, -+ nfc->regs + NFC_REG_ECC_CTL); -+ - offset += ecc->bytes + ecc->prepad; - oob += ecc->bytes + ecc->prepad; - } -@@ -804,9 +1198,11 @@ static int sunxi_nfc_hw_syndrome_ecc_wri - cnt = mtd->oobsize - (oob - chip->oob_poi); - if (cnt > 0) { - chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1); -- chip->write_buf(mtd, oob, cnt); -+ nand_rnd_config(mtd, -1, offset, NAND_RND_WRITE); -+ nand_rnd_write_buf(mtd, oob, cnt); - } - } -+ nand_rnd_config(mtd, -1, -1, NAND_RND_WRITE); - - tmp = readl(nfc->regs + NFC_REG_ECC_CTL); - tmp &= ~NFC_ECC_EN; -@@ -816,6 +1212,128 @@ static int sunxi_nfc_hw_syndrome_ecc_wri - return 0; - } - -+static u16 sunxi_nfc_hw_syndrome_ecc_rnd_steps(struct mtd_info *mtd, u16 state, -+ int column, int *left) -+{ -+ struct nand_chip *chip = mtd->priv; -+ struct nand_ecc_ctrl *ecc = chip->cur_ecc; -+ struct sunxi_nand_hw_rnd *rnd = chip->cur_rnd->priv; -+ int eccsteps = mtd->writesize / ecc->size; -+ int modsize = ecc->size + ecc->prepad + ecc->bytes; -+ int steps; -+ -+ if (column < (eccsteps * modsize)) { -+ steps = column % modsize; -+ *left = modsize - steps; -+ if (steps >= ecc->size) { -+ steps -= ecc->size; -+ state = rnd->subseeds[rnd->page % rnd->nseeds]; -+ } -+ } else { -+ steps = column % 4096; -+ *left = mtd->writesize + mtd->oobsize - column; -+ } -+ -+ return sunxi_nfc_hwrnd_step(rnd, state, steps); -+} -+ -+static u16 default_seeds[] = {0x4a80}; -+ -+static void sunxi_nand_rnd_ctrl_cleanup(struct nand_rnd_ctrl *rnd) -+{ -+ struct sunxi_nand_hw_rnd *hwrnd = rnd->priv; -+ -+ if (hwrnd->seeds != default_seeds) -+ kfree(hwrnd->seeds); -+ kfree(hwrnd->subseeds); -+ kfree(rnd->layout); -+ kfree(hwrnd); -+} -+ -+static int sunxi_nand_rnd_ctrl_init(struct mtd_info *mtd, -+ struct nand_rnd_ctrl *rnd, -+ struct nand_ecc_ctrl *ecc, -+ struct device_node *np) -+{ -+ struct sunxi_nand_hw_rnd *hwrnd; -+ struct nand_rnd_layout *layout = NULL; -+ int ret; -+ -+ hwrnd = kzalloc(sizeof(*hwrnd), GFP_KERNEL); -+ if (!hwrnd) -+ return -ENOMEM; -+ -+ hwrnd->seeds = default_seeds; -+ hwrnd->nseeds = ARRAY_SIZE(default_seeds); -+ -+ if (of_get_property(np, "nand-randomizer-seeds", &ret)) { -+ hwrnd->nseeds = ret / sizeof(*hwrnd->seeds); -+ hwrnd->seeds = kzalloc(hwrnd->nseeds * sizeof(*hwrnd->seeds), -+ GFP_KERNEL); -+ if (!hwrnd->seeds) { -+ ret = -ENOMEM; -+ goto err; -+ } -+ -+ ret = of_property_read_u16_array(np, "nand-randomizer-seeds", -+ hwrnd->seeds, hwrnd->nseeds); -+ if (ret) -+ goto err; -+ } -+ -+ switch (ecc->mode) { -+ case NAND_ECC_HW_SYNDROME: -+ hwrnd->step = sunxi_nfc_hw_syndrome_ecc_rnd_steps; -+ break; -+ -+ case NAND_ECC_HW: -+ hwrnd->step = sunxi_nfc_hw_ecc_rnd_steps; -+ -+ default: -+ layout = kzalloc(sizeof(*layout) + sizeof(struct nand_rndfree), -+ GFP_KERNEL); -+ if (!layout) { -+ ret = -ENOMEM; -+ goto err; -+ } -+ layout->nranges = 1; -+ layout->ranges[0].offset = mtd->writesize; -+ layout->ranges[0].length = 2; -+ rnd->layout = layout; -+ break; -+ } -+ -+ if (ecc->mode == NAND_ECC_HW_SYNDROME || ecc->mode == NAND_ECC_HW) { -+ int i; -+ -+ hwrnd->subseeds = kzalloc(hwrnd->nseeds * -+ sizeof(*hwrnd->subseeds), -+ GFP_KERNEL); -+ if (!hwrnd->subseeds) { -+ ret = -ENOMEM; -+ goto err; -+ } -+ -+ for (i = 0; i < hwrnd->nseeds; i++) -+ hwrnd->subseeds[i] = sunxi_nfc_hwrnd_step(hwrnd, -+ hwrnd->seeds[i], -+ ecc->size); -+ } -+ -+ rnd->config = sunxi_nfc_hwrnd_config; -+ rnd->read_buf = sunxi_nfc_hwrnd_read_buf; -+ rnd->write_buf = sunxi_nfc_hwrnd_write_buf; -+ rnd->priv = hwrnd; -+ -+ return 0; -+ -+err: -+ kfree(hwrnd); -+ kfree(layout); -+ -+ return ret; -+} -+ - static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip, - const struct nand_sdr_timings *timings) - { -@@ -1076,6 +1594,40 @@ static int sunxi_nand_hw_syndrome_ecc_ct - return 0; - } - -+static void sunxi_nand_rnd_cleanup(struct nand_rnd_ctrl *rnd) -+{ -+ switch (rnd->mode) { -+ case NAND_RND_HW: -+ sunxi_nand_rnd_ctrl_cleanup(rnd); -+ break; -+ default: -+ break; -+ } -+} -+ -+static int sunxi_nand_rnd_init(struct mtd_info *mtd, -+ struct nand_rnd_ctrl *rnd, -+ struct nand_ecc_ctrl *ecc, -+ struct device_node *np) -+{ -+ int ret; -+ -+ rnd->mode = NAND_RND_NONE; -+ -+ ret = of_get_nand_rnd_mode(np); -+ if (ret >= 0) -+ rnd->mode = ret; -+ -+ switch (rnd->mode) { -+ case NAND_RND_HW: -+ return sunxi_nand_rnd_ctrl_init(mtd, rnd, ecc, np); -+ default: -+ break; -+ } -+ -+ return 0; -+} -+ - static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc) - { - switch (ecc->mode) { -@@ -1167,7 +1719,14 @@ struct nand_part *sunxi_ofnandpart_parse - if (ret) - goto err; - -+ ret = sunxi_nand_rnd_init(master, &part->rnd, &part->ecc, pp); -+ if (ret) { -+ sunxi_nand_ecc_cleanup(&part->ecc); -+ goto err; -+ } -+ - part->part.ecc = &part->ecc; -+ part->part.rnd = &part->rnd; - - return &part->part; - -@@ -1292,18 +1851,30 @@ static int sunxi_nand_chip_init(struct d - if (ret) - return ret; - -+ chip->buffer = kzalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL); -+ if (!chip->buffer) -+ return -ENOMEM; -+ - ret = sunxi_nand_chip_init_timings(chip, np); - if (ret) { - dev_err(dev, "could not configure chip timings: %d\n", ret); - return ret; - } - -+ ret = nand_pst_create(mtd); -+ if (ret) -+ return ret; -+ - ret = sunxi_nand_ecc_init(mtd, &nand->ecc, np); - if (ret) { - dev_err(dev, "ECC init failed: %d\n", ret); - return ret; - } - -+ ret = sunxi_nand_rnd_init(mtd, &nand->rnd, &nand->ecc, np); -+ if (ret) -+ return ret; -+ - ret = nand_scan_tail(mtd); - if (ret) { - dev_err(dev, "nand_scan_tail failed: %d\n", ret); -@@ -1360,6 +1931,8 @@ static void sunxi_nand_chips_cleanup(str - nand_release(&chip->mtd); - sunxi_nand_ecc_cleanup(&chip->nand.ecc); - list_del(&chip->node); -+ sunxi_nand_rnd_cleanup(&chip->nand.rnd); -+ kfree(chip->buffer); - } - } - diff --git a/target/linux/sunxi/patches-4.1/124-mtd-nand-sunxi-fallback-to-chip-config.patch b/target/linux/sunxi/patches-4.1/124-mtd-nand-sunxi-fallback-to-chip-config.patch deleted file mode 100644 index cba30d2..0000000 --- a/target/linux/sunxi/patches-4.1/124-mtd-nand-sunxi-fallback-to-chip-config.patch +++ /dev/null @@ -1,65 +0,0 @@ -From de994d9c849ca0ca020fccfa1916afcde7f313f2 Mon Sep 17 00:00:00 2001 -From: Boris BREZILLON <boris.brezillon@free-electrons.com> -Date: Sun, 24 Aug 2014 10:40:44 +0200 -Subject: [PATCH] mtd: nand: sunxi: Fallback to chip config when partition - config is not available - -Fallback to chip config for partitions where ecc/rnd config are not -specified in the device tree. - -Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - drivers/mtd/nand/sunxi_nand.c | 27 ++++++++++++++++++--------- - 1 file changed, 18 insertions(+), 9 deletions(-) - ---- a/drivers/mtd/nand/sunxi_nand.c -+++ b/drivers/mtd/nand/sunxi_nand.c -@@ -1709,28 +1709,37 @@ static void sunxi_nand_part_release(stru - struct nand_part *sunxi_ofnandpart_parse(void *priv, struct mtd_info *master, - struct device_node *pp) - { -+ struct nand_chip *chip = master->priv; - struct sunxi_nand_part *part; - int ret; - - part = kzalloc(sizeof(*part), GFP_KERNEL); - part->part.release = sunxi_nand_part_release; - -- ret = sunxi_nand_ecc_init(master, &part->ecc, pp); -- if (ret) -- goto err; -- -- ret = sunxi_nand_rnd_init(master, &part->rnd, &part->ecc, pp); -- if (ret) { -- sunxi_nand_ecc_cleanup(&part->ecc); -- goto err; -+ if (of_find_property(pp, "nand-ecc-mode", NULL)) { -+ ret = sunxi_nand_ecc_init(master, &part->ecc, pp); -+ if (ret) -+ goto err; -+ -+ part->part.ecc = &part->ecc; - } - -- part->part.ecc = &part->ecc; -- part->part.rnd = &part->rnd; -+ if (of_find_property(pp, "nand-rnd-mode", NULL)) { -+ ret = sunxi_nand_rnd_init(master, &part->rnd, -+ part->part.ecc ? part->part.ecc : &chip->ecc, -+ pp); -+ if (ret) -+ goto err; -+ -+ part->part.rnd = &part->rnd; -+ } - - return &part->part; - - err: -+ if (part->part.ecc) -+ sunxi_nand_ecc_cleanup(part->part.ecc); -+ - kfree(part); - return ERR_PTR(ret); - } diff --git a/target/linux/sunxi/patches-4.1/125-mtd-nand-sunxi-extend-bbt_options.patch b/target/linux/sunxi/patches-4.1/125-mtd-nand-sunxi-extend-bbt_options.patch deleted file mode 100644 index 136cabc..0000000 --- a/target/linux/sunxi/patches-4.1/125-mtd-nand-sunxi-extend-bbt_options.patch +++ /dev/null @@ -1,34 +0,0 @@ -From a5ba30016f4a29f5875112169a92a28a9ba7f5c9 Mon Sep 17 00:00:00 2001 -From: Hans de Goede <hdegoede@redhat.com> -Date: Mon, 25 May 2015 11:59:03 +0200 -Subject: [PATCH] mtd: nand: sunxi: Add NAND_BBT_CREATE_EMPTY to bbt_options - -The ftl format used by the Allwinner Android kernels, with which most -Allwinnner devices ship, overrides the factory bad block markers, and -fills the oob data with a pattern which causes a lot of false bad block -positives, so when we first create a bbt table, start with an empty one -to avoid marking a ton of blocks as bad from the start. - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - drivers/mtd/nand/sunxi_nand.c | 9 +++++++++ - 1 file changed, 9 insertions(+) - ---- a/drivers/mtd/nand/sunxi_nand.c -+++ b/drivers/mtd/nand/sunxi_nand.c -@@ -1851,6 +1851,15 @@ static int sunxi_nand_chip_init(struct d - if (of_get_nand_on_flash_bbt(np)) - nand->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB; - -+ /* -+ * The ftl format used by the Allwinner Android kernels overrides -+ * the factory bad block markers, and fills the oob data with a -+ * pattern which causes a lot of false bad block positives, so -+ * when we first create a bbt table, start with an empty one -+ * to avoid marking a ton of blocks as bad from the start. -+ */ -+ nand->bbt_options |= NAND_BBT_CREATE_EMPTY; -+ - mtd = &chip->mtd; - mtd->dev.parent = dev; - mtd->priv = nand; diff --git a/target/linux/sunxi/patches-4.1/126-1-dt-sun4i-add-nand-ctrlpin-defs.patch b/target/linux/sunxi/patches-4.1/126-1-dt-sun4i-add-nand-ctrlpin-defs.patch deleted file mode 100644 index 9611720..0000000 --- a/target/linux/sunxi/patches-4.1/126-1-dt-sun4i-add-nand-ctrlpin-defs.patch +++ /dev/null @@ -1,102 +0,0 @@ -From 00f9956384e3cf011e0d5ffd211847bf9336ec78 Mon Sep 17 00:00:00 2001 -From: Michal Suchanek <hramrach@gmail.com> -Date: Tue, 26 May 2015 17:01:33 +0200 -Subject: [PATCH] ARM: dts: sun4i: Add NAND controller pin definitions - -Define the NAND controller pin configs. - -Signed-off-by: Michal Suchanek <hramrach@gmail.com> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 80 ++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 80 insertions(+) - ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -774,6 +774,86 @@ - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; -+ -+ nand_pins_a: nand_base0@0 { -+ allwinner,pins = "PC0", "PC1", "PC2", -+ "PC5", "PC8", "PC9", "PC10", -+ "PC11", "PC12", "PC13", "PC14", -+ "PC15", "PC16"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ nand_cs0_pins_a: nand_cs@0 { -+ allwinner,pins = "PC4"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ nand_cs1_pins_a: nand_cs@1 { -+ allwinner,pins = "PC3"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ nand_cs2_pins_a: nand_cs@2 { -+ allwinner,pins = "PC17"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ nand_cs3_pins_a: nand_cs@3 { -+ allwinner,pins = "PC18"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ nand_cs4_pins_a: nand_cs@4 { -+ allwinner,pins = "PC19"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ nand_cs5_pins_a: nand_cs@5 { -+ allwinner,pins = "PC20"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ nand_cs6_pins_a: nand_cs@6 { -+ allwinner,pins = "PC21"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ nand_cs7_pins_a: nand_cs@7 { -+ allwinner,pins = "PC22"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ nand_rb0_pins_a: nand_rb@0 { -+ allwinner,pins = "PC6"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ nand_rb1_pins_a: nand_rb@1 { -+ allwinner,pins = "PC7"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; - }; - - timer@01c20c00 { diff --git a/target/linux/sunxi/patches-4.1/126-2-dt-sun5i-add-nand-ctrlpin-defs.patch b/target/linux/sunxi/patches-4.1/126-2-dt-sun5i-add-nand-ctrlpin-defs.patch deleted file mode 100644 index 3193a6a..0000000 --- a/target/linux/sunxi/patches-4.1/126-2-dt-sun5i-add-nand-ctrlpin-defs.patch +++ /dev/null @@ -1,81 +0,0 @@ -From a8ad7637cec0c2c2b1322d78b142beea4621dd23 Mon Sep 17 00:00:00 2001 -From: Hans de Goede <hdegoede@redhat.com> -Date: Tue, 26 May 2015 17:18:26 +0200 -Subject: [PATCH] ARM: dts: sun5i: Add NAND controller pin definitions - -Define the NAND controller pin configs. - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/sun5i-a10s.dtsi | 14 ++++++++++++++ - arch/arm/boot/dts/sun5i.dtsi | 38 ++++++++++++++++++++++++++++++++++++++ - 2 files changed, 52 insertions(+) - ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -656,4 +656,18 @@ - clocks = <&ahb_gates 28>; - }; - }; -+ -+ nand_cs2_pins_a: nand_cs@2 { -+ allwinner,pins = "PC17"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ nand_cs3_pins_a: nand_cs@3 { -+ allwinner,pins = "PC18"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; - }; ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -528,6 +528,44 @@ - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; -+ -+ nand_pins_a: nand_base0@0 { -+ allwinner,pins = "PC0", "PC1", "PC2", -+ "PC5", "PC8", "PC9", "PC10", -+ "PC11", "PC12", "PC13", "PC14", -+ "PC15"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ nand_cs0_pins_a: nand_cs@0 { -+ allwinner,pins = "PC4"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ nand_cs1_pins_a: nand_cs@1 { -+ allwinner,pins = "PC3"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ nand_rb0_pins_a: nand_rb@0 { -+ allwinner,pins = "PC6"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ nand_rb1_pins_a: nand_rb@1 { -+ allwinner,pins = "PC7"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; - }; - - timer@01c20c00 { diff --git a/target/linux/sunxi/patches-4.1/126-3-dt-sun7i-add-nand-ctrlpin-defs.patch b/target/linux/sunxi/patches-4.1/126-3-dt-sun7i-add-nand-ctrlpin-defs.patch deleted file mode 100644 index 0f3dc61..0000000 --- a/target/linux/sunxi/patches-4.1/126-3-dt-sun7i-add-nand-ctrlpin-defs.patch +++ /dev/null @@ -1,102 +0,0 @@ -From 576701449b01fb0dfaa76bb71f2b94ab5194c1dc Mon Sep 17 00:00:00 2001 -From: Boris BREZILLON <boris.brezillon@free-electrons.com> -Date: Mon, 28 Jul 2014 14:08:15 +0200 -Subject: [PATCH] ARM: dts: sun7i: Add NAND controller pin definitions - -Define the NAND controller pin configs. - -Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 80 ++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 80 insertions(+) - ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -978,6 +978,86 @@ - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; -+ -+ nand_pins_a: nand_base0@0 { -+ allwinner,pins = "PC0", "PC1", "PC2", -+ "PC5", "PC8", "PC9", "PC10", -+ "PC11", "PC12", "PC13", "PC14", -+ "PC15", "PC16"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ nand_cs0_pins_a: nand_cs@0 { -+ allwinner,pins = "PC4"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ nand_cs1_pins_a: nand_cs@1 { -+ allwinner,pins = "PC3"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ nand_cs2_pins_a: nand_cs@2 { -+ allwinner,pins = "PC17"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ nand_cs3_pins_a: nand_cs@3 { -+ allwinner,pins = "PC18"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ nand_cs4_pins_a: nand_cs@4 { -+ allwinner,pins = "PC19"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ nand_cs5_pins_a: nand_cs@5 { -+ allwinner,pins = "PC20"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ nand_cs6_pins_a: nand_cs@6 { -+ allwinner,pins = "PC21"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ nand_cs7_pins_a: nand_cs@7 { -+ allwinner,pins = "PC22"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ nand_rb0_pins_a: nand_rb@0 { -+ allwinner,pins = "PC6"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ nand_rb1_pins_a: nand_rb@1 { -+ allwinner,pins = "PC7"; -+ allwinner,function = "nand0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; - }; - - timer@01c20c00 { diff --git a/target/linux/sunxi/patches-4.1/126-4-dt-sun4i-add-nfc-to-a10.patch b/target/linux/sunxi/patches-4.1/126-4-dt-sun4i-add-nfc-to-a10.patch deleted file mode 100644 index ff8e093..0000000 --- a/target/linux/sunxi/patches-4.1/126-4-dt-sun4i-add-nfc-to-a10.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 9cc66234a20c6ba1611233a122f04f3b175ad2d3 Mon Sep 17 00:00:00 2001 -From: Boris BREZILLON <boris.brezillon@free-electrons.com> -Date: Mon, 28 Jul 2014 14:01:22 +0200 -Subject: [PATCH] ARM: dts: sun7i: Add NFC node to Allwinner A20 SoC - -Add NAND Flash controller node definition to the A20 SoC. - -Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 11 +++++++++++ - 1 file changed, 11 insertions(+) - ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -543,6 +543,17 @@ - #dma-cells = <2>; - }; - -+ nfc: nand@01c03000 { -+ compatible = "allwinner,sun4i-a10-nand"; -+ reg = <0x01c03000 0x1000>; -+ interrupts = <0 37 4>; -+ clocks = <&ahb_gates 13>, <&nand_clk>; -+ clock-names = "ahb", "mod"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ - spi0: spi@01c05000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c05000 0x1000>; diff --git a/target/linux/sunxi/patches-4.1/126-5-dt-sun4i-add-nfc-to-a10.patch b/target/linux/sunxi/patches-4.1/126-5-dt-sun4i-add-nfc-to-a10.patch deleted file mode 100644 index 64473a9..0000000 --- a/target/linux/sunxi/patches-4.1/126-5-dt-sun4i-add-nfc-to-a10.patch +++ /dev/null @@ -1,33 +0,0 @@ -From a5bbf2ee4ca1479e4488399a45336e003e09647f Mon Sep 17 00:00:00 2001 -From: Michal Suchanek <hramrach@gmail.com> -Date: Tue, 26 May 2015 17:03:41 +0200 -Subject: [PATCH] ARM: dts: sun4i: Add NFC node to Allwinner A10 SoC - -Add NAND Flash controller node definition to the A10 SoC. - -Signed-off-by: Michal Suchanek <hramrach@gmail.com> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 11 +++++++++++ - 1 file changed, 11 insertions(+) - ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -428,6 +428,17 @@ - #dma-cells = <2>; - }; - -+ nfc: nand@01c03000 { -+ compatible = "allwinner,sun4i-a10-nand"; -+ reg = <0x01c03000 0x1000>; -+ interrupts = <37>; -+ clocks = <&ahb_gates 13>, <&nand_clk>; -+ clock-names = "ahb", "mod"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ - spi0: spi@01c05000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c05000 0x1000>; diff --git a/target/linux/sunxi/patches-4.1/126-6-dt-sun5i-add-nfc-to-a13.patch b/target/linux/sunxi/patches-4.1/126-6-dt-sun5i-add-nfc-to-a13.patch deleted file mode 100644 index 5c4e1f1..0000000 --- a/target/linux/sunxi/patches-4.1/126-6-dt-sun5i-add-nfc-to-a13.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 22ef77b0ba8fa347fe4b8c4c05d0bf0d08f4c141 Mon Sep 17 00:00:00 2001 -From: Hans de Goede <hdegoede@redhat.com> -Date: Tue, 26 May 2015 18:01:50 +0200 -Subject: [PATCH] ARM: dts: sun5i: Add NFC node to Allwinner A13/A10s SoC - -Add NAND Flash controller node definition to the A13/a10s SoC. - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/sun5i.dtsi | 11 +++++++++++ - 1 file changed, 11 insertions(+) - ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -365,6 +365,17 @@ - #dma-cells = <2>; - }; - -+ nfc: nand@01c03000 { -+ compatible = "allwinner,sun4i-a10-nand"; -+ reg = <0x01c03000 0x1000>; -+ interrupts = <37>; -+ clocks = <&ahb_gates 13>, <&nand_clk>; -+ clock-names = "ahb", "mod"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ - spi0: spi@01c05000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c05000 0x1000>; diff --git a/target/linux/sunxi/patches-4.1/127-1-dt-sun5i-enable-nand-on-a13-olinuxino.patch b/target/linux/sunxi/patches-4.1/127-1-dt-sun5i-enable-nand-on-a13-olinuxino.patch deleted file mode 100644 index 6097ce3..0000000 --- a/target/linux/sunxi/patches-4.1/127-1-dt-sun5i-enable-nand-on-a13-olinuxino.patch +++ /dev/null @@ -1,77 +0,0 @@ -From f84e215756932c495bc92c50d40d8cd6773822bb Mon Sep 17 00:00:00 2001 -From: Hans de Goede <hdegoede@redhat.com> -Date: Tue, 26 May 2015 21:06:22 +0200 -Subject: [PATCH] ARM: dts: sun5i: Enable NAND on A13 OLinuxIno board - -Add a node describing the NAND controller and partitions. - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 59 +++++++++++++++++++++++++++++++ - 1 file changed, 59 insertions(+) - ---- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts -+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts -@@ -201,3 +201,62 @@ - status = "okay"; - }; - }; -+&nfc { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; -+ status = "okay"; -+ -+ nand@0 { -+ #address-cells = <2>; -+ #size-cells = <2>; -+ reg = <0>; -+ allwinner,rb = <0>; -+ -+ nand-ecc-mode = "hw"; -+ nand-rnd-mode = "hw"; -+ nand-ecc-strength = <40>; -+ nand-ecc-step-size = <1024>; -+ nand-on-flash-bbt; -+ -+ boot0@0 { -+ label = "boot0"; -+ reg = /bits/ 64 <0x0 0x200000>; -+ nand-ecc-mode = "hw_syndrome"; -+ nand-rnd-mode = "hw"; -+ nand-randomizer-seeds = /bits/ 16 <0x4a80>; -+ }; -+ -+ boot0-rescue@200000 { -+ label = "boot0-rescue"; -+ reg = /bits/ 64 <0x200000 0x200000>; -+ nand-ecc-mode = "hw_syndrome"; -+ nand-rnd-mode = "hw"; -+ nand-randomizer-seeds = /bits/ 16 <0x4a80>; -+ }; -+ -+ main@200000 { -+ label = "main"; -+ reg = /bits/ 64 <0x400000 0xffc00000>; -+ nand-ecc-mode = "hw"; -+ nand-rnd-mode = "hw"; -+ nand-randomizer-seeds = /bits/ 16 < -+ 0x2b75 0x0bd0 0x5ca3 0x62d1 0x1c93 0x07e9 0x2162 0x3a72 -+ 0x0d67 0x67f9 0x1be7 0x077d 0x032f 0x0dac 0x2716 0x2436 -+ 0x7922 0x1510 0x3860 0x5287 0x480f 0x4252 0x1789 0x5a2d -+ 0x2a49 0x5e10 0x437f 0x4b4e 0x2f45 0x216e 0x5cb7 0x7130 -+ 0x2a3f 0x60e4 0x4dc9 0x0ef0 0x0f52 0x1bb9 0x6211 0x7a56 -+ 0x226d 0x4ea7 0x6f36 0x3692 0x38bf 0x0c62 0x05eb 0x4c55 -+ 0x60f4 0x728c 0x3b6f 0x2037 0x7f69 0x0936 0x651a 0x4ceb -+ 0x6218 0x79f3 0x383f 0x18d9 0x4f05 0x5c82 0x2912 0x6f17 -+ 0x6856 0x5938 0x1007 0x61ab 0x3e7f 0x57c2 0x542f 0x4f62 -+ 0x7454 0x2eac 0x7739 0x42d4 0x2f90 0x435a 0x2e52 0x2064 -+ 0x637c 0x66ad 0x2c90 0x0bad 0x759c 0x0029 0x0986 0x7126 -+ 0x1ca7 0x1605 0x386a 0x27f5 0x1380 0x6d75 0x24c3 0x0f8e -+ 0x2b7a 0x1418 0x1fd1 0x7dc1 0x2d8e 0x43af 0x2267 0x7da3 -+ 0x4e3d 0x1338 0x50db 0x454d 0x764d 0x40a3 0x42e6 0x262b -+ 0x2d2e 0x1aea 0x2e17 0x173d 0x3a6e 0x71bf 0x25f9 0x0a5d -+ 0x7c57 0x0fbe 0x46ce 0x4939 0x6b17 0x37bb 0x3e91 0x76db>; -+ }; -+ }; -+}; -+ diff --git a/target/linux/sunxi/patches-4.1/127-2-dt-sun7i-enable-nand-on-a20-olinuxino.patch b/target/linux/sunxi/patches-4.1/127-2-dt-sun7i-enable-nand-on-a20-olinuxino.patch deleted file mode 100644 index a7dee13..0000000 --- a/target/linux/sunxi/patches-4.1/127-2-dt-sun7i-enable-nand-on-a20-olinuxino.patch +++ /dev/null @@ -1,63 +0,0 @@ ---- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -@@ -245,3 +245,60 @@ - status = "okay"; - }; - }; -+&nfc { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&nand_pins_a>, <&nand_cs0_pins_a>, <&nand_rb0_pins_a>; -+ status = "okay"; -+ -+ nand@0 { -+ #address-cells = <2>; -+ #size-cells = <2>; -+ reg = <0>; -+ allwinner,rb = <0>; -+ -+ nand-ecc-mode = "hw"; -+ nand-rnd-mode = "hw"; -+ nand-on-flash-bbt; -+ -+ boot0@0 { -+ label = "boot0"; -+ reg = /bits/ 64 <0x0 0x200000>; -+ nand-ecc-mode = "hw_syndrome"; -+ nand-rnd-mode = "hw"; -+ nand-randomizer-seeds = /bits/ 16 <0x4a80>; -+ }; -+ -+ boot0-rescue@200000 { -+ label = "boot0-rescue"; -+ reg = /bits/ 64 <0x200000 0x200000>; -+ nand-ecc-mode = "hw_syndrome"; -+ nand-rnd-mode = "hw"; -+ nand-randomizer-seeds = /bits/ 16 <0x4a80>; -+ }; -+ -+ main@200000 { -+ label = "main"; -+ reg = /bits/ 64 <0x400000 0xffc00000>; -+ nand-ecc-mode = "hw"; -+ nand-rnd-mode = "hw"; -+ nand-randomizer-seeds = /bits/ 16 < -+ 0x2b75 0x0bd0 0x5ca3 0x62d1 0x1c93 0x07e9 0x2162 0x3a72 -+ 0x0d67 0x67f9 0x1be7 0x077d 0x032f 0x0dac 0x2716 0x2436 -+ 0x7922 0x1510 0x3860 0x5287 0x480f 0x4252 0x1789 0x5a2d -+ 0x2a49 0x5e10 0x437f 0x4b4e 0x2f45 0x216e 0x5cb7 0x7130 -+ 0x2a3f 0x60e4 0x4dc9 0x0ef0 0x0f52 0x1bb9 0x6211 0x7a56 -+ 0x226d 0x4ea7 0x6f36 0x3692 0x38bf 0x0c62 0x05eb 0x4c55 -+ 0x60f4 0x728c 0x3b6f 0x2037 0x7f69 0x0936 0x651a 0x4ceb -+ 0x6218 0x79f3 0x383f 0x18d9 0x4f05 0x5c82 0x2912 0x6f17 -+ 0x6856 0x5938 0x1007 0x61ab 0x3e7f 0x57c2 0x542f 0x4f62 -+ 0x7454 0x2eac 0x7739 0x42d4 0x2f90 0x435a 0x2e52 0x2064 -+ 0x637c 0x66ad 0x2c90 0x0bad 0x759c 0x0029 0x0986 0x7126 -+ 0x1ca7 0x1605 0x386a 0x27f5 0x1380 0x6d75 0x24c3 0x0f8e -+ 0x2b7a 0x1418 0x1fd1 0x7dc1 0x2d8e 0x43af 0x2267 0x7da3 -+ 0x4e3d 0x1338 0x50db 0x454d 0x764d 0x40a3 0x42e6 0x262b -+ 0x2d2e 0x1aea 0x2e17 0x173d 0x3a6e 0x71bf 0x25f9 0x0a5d -+ 0x7c57 0x0fbe 0x46ce 0x4939 0x6b17 0x37bb 0x3e91 0x76db>; -+ }; -+ }; -+}; -+ diff --git a/target/linux/sunxi/patches-4.1/127-3-dt-sun4i-enable-nand-on-cubieboard.patch b/target/linux/sunxi/patches-4.1/127-3-dt-sun4i-enable-nand-on-cubieboard.patch deleted file mode 100644 index 4075a9e..0000000 --- a/target/linux/sunxi/patches-4.1/127-3-dt-sun4i-enable-nand-on-cubieboard.patch +++ /dev/null @@ -1,76 +0,0 @@ -From e9f0391c7fccd13dfc07b470775b417d18d7df3b Mon Sep 17 00:00:00 2001 -From: Michal Suchanek <hramrach@gmail.com> -Date: Fri, 12 Dec 2014 19:19:12 +0100 -Subject: [PATCH] ARM: dts: sun4i: Enable NAND on cubieboard - -Add a node describing the NAND controller and partitions. - -Signed-off-by: Michal Suchanek <hramrach@gmail.com> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 57 ++++++++++++++++++++++++++++++ - 1 file changed, 57 insertions(+) - ---- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -@@ -215,3 +215,60 @@ - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; - }; -+&nfc { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; -+ status = "okay"; -+ -+ nand@0 { -+ #address-cells = <2>; -+ #size-cells = <2>; -+ reg = <0>; -+ allwinner,rb = <0>; -+ -+ nand-ecc-mode = "hw"; -+ nand-rnd-mode = "hw"; -+ nand-on-flash-bbt; -+ -+ boot0@0 { -+ label = "boot0"; -+ reg = /bits/ 64 <0x0 0x200000>; -+ nand-ecc-mode = "hw_syndrome"; -+ nand-rnd-mode = "hw"; -+ nand-randomizer-seeds = /bits/ 16 <0x4a80>; -+ }; -+ -+ boot0-rescue@200000 { -+ label = "boot0-rescue"; -+ reg = /bits/ 64 <0x200000 0x200000>; -+ nand-ecc-mode = "hw_syndrome"; -+ nand-rnd-mode = "hw"; -+ nand-randomizer-seeds = /bits/ 16 <0x4a80>; -+ }; -+ -+ main@200000 { -+ label = "main"; -+ reg = /bits/ 64 <0x400000 0xffc00000>; -+ nand-ecc-mode = "hw"; -+ nand-rnd-mode = "hw"; -+ nand-randomizer-seeds = /bits/ 16 < -+ 0x2b75 0x0bd0 0x5ca3 0x62d1 0x1c93 0x07e9 0x2162 0x3a72 -+ 0x0d67 0x67f9 0x1be7 0x077d 0x032f 0x0dac 0x2716 0x2436 -+ 0x7922 0x1510 0x3860 0x5287 0x480f 0x4252 0x1789 0x5a2d -+ 0x2a49 0x5e10 0x437f 0x4b4e 0x2f45 0x216e 0x5cb7 0x7130 -+ 0x2a3f 0x60e4 0x4dc9 0x0ef0 0x0f52 0x1bb9 0x6211 0x7a56 -+ 0x226d 0x4ea7 0x6f36 0x3692 0x38bf 0x0c62 0x05eb 0x4c55 -+ 0x60f4 0x728c 0x3b6f 0x2037 0x7f69 0x0936 0x651a 0x4ceb -+ 0x6218 0x79f3 0x383f 0x18d9 0x4f05 0x5c82 0x2912 0x6f17 -+ 0x6856 0x5938 0x1007 0x61ab 0x3e7f 0x57c2 0x542f 0x4f62 -+ 0x7454 0x2eac 0x7739 0x42d4 0x2f90 0x435a 0x2e52 0x2064 -+ 0x637c 0x66ad 0x2c90 0x0bad 0x759c 0x0029 0x0986 0x7126 -+ 0x1ca7 0x1605 0x386a 0x27f5 0x1380 0x6d75 0x24c3 0x0f8e -+ 0x2b7a 0x1418 0x1fd1 0x7dc1 0x2d8e 0x43af 0x2267 0x7da3 -+ 0x4e3d 0x1338 0x50db 0x454d 0x764d 0x40a3 0x42e6 0x262b -+ 0x2d2e 0x1aea 0x2e17 0x173d 0x3a6e 0x71bf 0x25f9 0x0a5d -+ 0x7c57 0x0fbe 0x46ce 0x4939 0x6b17 0x37bb 0x3e91 0x76db>; -+ }; -+ }; -+}; -+ diff --git a/target/linux/sunxi/patches-4.1/127-4-dt-sun4i-enable-nand-on-a10-lime.patch b/target/linux/sunxi/patches-4.1/127-4-dt-sun4i-enable-nand-on-a10-lime.patch deleted file mode 100644 index 2464408..0000000 --- a/target/linux/sunxi/patches-4.1/127-4-dt-sun4i-enable-nand-on-a10-lime.patch +++ /dev/null @@ -1,65 +0,0 @@ ---- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts -+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts -@@ -189,3 +189,62 @@ - status = "okay"; - }; - }; -+&nfc { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; -+ status = "okay"; -+ -+ nand@0 { -+ #address-cells = <2>; -+ #size-cells = <2>; -+ reg = <0>; -+ allwinner,rb = <0>; -+ -+ nand-ecc-mode = "hw"; -+ nand-rnd-mode = "hw"; -+ nand-ecc-strength = <40>; -+ nand-ecc-step-size = <1024>; -+ nand-on-flash-bbt; -+ -+ boot0@0 { -+ label = "boot0"; -+ reg = /bits/ 64 <0x0 0x200000>; -+ nand-ecc-mode = "hw_syndrome"; -+ nand-rnd-mode = "hw"; -+ nand-randomizer-seeds = /bits/ 16 <0x4a80>; -+ }; -+ -+ boot0-rescue@200000 { -+ label = "boot0-rescue"; -+ reg = /bits/ 64 <0x200000 0x200000>; -+ nand-ecc-mode = "hw_syndrome"; -+ nand-rnd-mode = "hw"; -+ nand-randomizer-seeds = /bits/ 16 <0x4a80>; -+ }; -+ -+ main@200000 { -+ label = "main"; -+ reg = /bits/ 64 <0x400000 0xffc00000>; -+ nand-ecc-mode = "hw"; -+ nand-rnd-mode = "hw"; -+ nand-randomizer-seeds = /bits/ 16 < -+ 0x2b75 0x0bd0 0x5ca3 0x62d1 0x1c93 0x07e9 0x2162 0x3a72 -+ 0x0d67 0x67f9 0x1be7 0x077d 0x032f 0x0dac 0x2716 0x2436 -+ 0x7922 0x1510 0x3860 0x5287 0x480f 0x4252 0x1789 0x5a2d -+ 0x2a49 0x5e10 0x437f 0x4b4e 0x2f45 0x216e 0x5cb7 0x7130 -+ 0x2a3f 0x60e4 0x4dc9 0x0ef0 0x0f52 0x1bb9 0x6211 0x7a56 -+ 0x226d 0x4ea7 0x6f36 0x3692 0x38bf 0x0c62 0x05eb 0x4c55 -+ 0x60f4 0x728c 0x3b6f 0x2037 0x7f69 0x0936 0x651a 0x4ceb -+ 0x6218 0x79f3 0x383f 0x18d9 0x4f05 0x5c82 0x2912 0x6f17 -+ 0x6856 0x5938 0x1007 0x61ab 0x3e7f 0x57c2 0x542f 0x4f62 -+ 0x7454 0x2eac 0x7739 0x42d4 0x2f90 0x435a 0x2e52 0x2064 -+ 0x637c 0x66ad 0x2c90 0x0bad 0x759c 0x0029 0x0986 0x7126 -+ 0x1ca7 0x1605 0x386a 0x27f5 0x1380 0x6d75 0x24c3 0x0f8e -+ 0x2b7a 0x1418 0x1fd1 0x7dc1 0x2d8e 0x43af 0x2267 0x7da3 -+ 0x4e3d 0x1338 0x50db 0x454d 0x764d 0x40a3 0x42e6 0x262b -+ 0x2d2e 0x1aea 0x2e17 0x173d 0x3a6e 0x71bf 0x25f9 0x0a5d -+ 0x7c57 0x0fbe 0x46ce 0x4939 0x6b17 0x37bb 0x3e91 0x76db>; -+ }; -+ }; -+}; -+ diff --git a/target/linux/sunxi/patches-4.1/127-5-dt-sun4i-enable-nand-on-a10-pcduino.patch b/target/linux/sunxi/patches-4.1/127-5-dt-sun4i-enable-nand-on-a10-pcduino.patch deleted file mode 100644 index 93eb3eb..0000000 --- a/target/linux/sunxi/patches-4.1/127-5-dt-sun4i-enable-nand-on-a10-pcduino.patch +++ /dev/null @@ -1,65 +0,0 @@ ---- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts -+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts -@@ -194,3 +194,62 @@ - status = "okay"; - }; - }; -+&nfc { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; -+ status = "okay"; -+ -+ nand@0 { -+ #address-cells = <2>; -+ #size-cells = <2>; -+ reg = <0>; -+ allwinner,rb = <0>; -+ -+ nand-ecc-mode = "hw"; -+ nand-rnd-mode = "hw"; -+ nand-ecc-strength = <40>; -+ nand-ecc-step-size = <1024>; -+ nand-on-flash-bbt; -+ -+ boot0@0 { -+ label = "boot0"; -+ reg = /bits/ 64 <0x0 0x200000>; -+ nand-ecc-mode = "hw_syndrome"; -+ nand-rnd-mode = "hw"; -+ nand-randomizer-seeds = /bits/ 16 <0x4a80>; -+ }; -+ -+ boot0-rescue@200000 { -+ label = "boot0-rescue"; -+ reg = /bits/ 64 <0x200000 0x200000>; -+ nand-ecc-mode = "hw_syndrome"; -+ nand-rnd-mode = "hw"; -+ nand-randomizer-seeds = /bits/ 16 <0x4a80>; -+ }; -+ -+ main@200000 { -+ label = "main"; -+ reg = /bits/ 64 <0x400000 0xffc00000>; -+ nand-ecc-mode = "hw"; -+ nand-rnd-mode = "hw"; -+ nand-randomizer-seeds = /bits/ 16 < -+ 0x2b75 0x0bd0 0x5ca3 0x62d1 0x1c93 0x07e9 0x2162 0x3a72 -+ 0x0d67 0x67f9 0x1be7 0x077d 0x032f 0x0dac 0x2716 0x2436 -+ 0x7922 0x1510 0x3860 0x5287 0x480f 0x4252 0x1789 0x5a2d -+ 0x2a49 0x5e10 0x437f 0x4b4e 0x2f45 0x216e 0x5cb7 0x7130 -+ 0x2a3f 0x60e4 0x4dc9 0x0ef0 0x0f52 0x1bb9 0x6211 0x7a56 -+ 0x226d 0x4ea7 0x6f36 0x3692 0x38bf 0x0c62 0x05eb 0x4c55 -+ 0x60f4 0x728c 0x3b6f 0x2037 0x7f69 0x0936 0x651a 0x4ceb -+ 0x6218 0x79f3 0x383f 0x18d9 0x4f05 0x5c82 0x2912 0x6f17 -+ 0x6856 0x5938 0x1007 0x61ab 0x3e7f 0x57c2 0x542f 0x4f62 -+ 0x7454 0x2eac 0x7739 0x42d4 0x2f90 0x435a 0x2e52 0x2064 -+ 0x637c 0x66ad 0x2c90 0x0bad 0x759c 0x0029 0x0986 0x7126 -+ 0x1ca7 0x1605 0x386a 0x27f5 0x1380 0x6d75 0x24c3 0x0f8e -+ 0x2b7a 0x1418 0x1fd1 0x7dc1 0x2d8e 0x43af 0x2267 0x7da3 -+ 0x4e3d 0x1338 0x50db 0x454d 0x764d 0x40a3 0x42e6 0x262b -+ 0x2d2e 0x1aea 0x2e17 0x173d 0x3a6e 0x71bf 0x25f9 0x0a5d -+ 0x7c57 0x0fbe 0x46ce 0x4939 0x6b17 0x37bb 0x3e91 0x76db>; -+ }; -+ }; -+}; -+ diff --git a/target/linux/sunxi/patches-4.1/127-6-dt-sun7i-enable-nand-on-a20-pcduino3.patch b/target/linux/sunxi/patches-4.1/127-6-dt-sun7i-enable-nand-on-a20-pcduino3.patch deleted file mode 100644 index 81de87f..0000000 --- a/target/linux/sunxi/patches-4.1/127-6-dt-sun7i-enable-nand-on-a20-pcduino3.patch +++ /dev/null @@ -1,65 +0,0 @@ ---- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts -+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts -@@ -210,3 +210,62 @@ - status = "okay"; - }; - }; -+&nfc { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; -+ status = "okay"; -+ -+ nand@0 { -+ #address-cells = <2>; -+ #size-cells = <2>; -+ reg = <0>; -+ allwinner,rb = <0>; -+ -+ nand-ecc-mode = "hw"; -+ nand-rnd-mode = "hw"; -+ nand-ecc-strength = <40>; -+ nand-ecc-step-size = <1024>; -+ nand-on-flash-bbt; -+ -+ boot0@0 { -+ label = "boot0"; -+ reg = /bits/ 64 <0x0 0x200000>; -+ nand-ecc-mode = "hw_syndrome"; -+ nand-rnd-mode = "hw"; -+ nand-randomizer-seeds = /bits/ 16 <0x4a80>; -+ }; -+ -+ boot0-rescue@200000 { -+ label = "boot0-rescue"; -+ reg = /bits/ 64 <0x200000 0x200000>; -+ nand-ecc-mode = "hw_syndrome"; -+ nand-rnd-mode = "hw"; -+ nand-randomizer-seeds = /bits/ 16 <0x4a80>; -+ }; -+ -+ main@200000 { -+ label = "main"; -+ reg = /bits/ 64 <0x400000 0xffc00000>; -+ nand-ecc-mode = "hw"; -+ nand-rnd-mode = "hw"; -+ nand-randomizer-seeds = /bits/ 16 < -+ 0x2b75 0x0bd0 0x5ca3 0x62d1 0x1c93 0x07e9 0x2162 0x3a72 -+ 0x0d67 0x67f9 0x1be7 0x077d 0x032f 0x0dac 0x2716 0x2436 -+ 0x7922 0x1510 0x3860 0x5287 0x480f 0x4252 0x1789 0x5a2d -+ 0x2a49 0x5e10 0x437f 0x4b4e 0x2f45 0x216e 0x5cb7 0x7130 -+ 0x2a3f 0x60e4 0x4dc9 0x0ef0 0x0f52 0x1bb9 0x6211 0x7a56 -+ 0x226d 0x4ea7 0x6f36 0x3692 0x38bf 0x0c62 0x05eb 0x4c55 -+ 0x60f4 0x728c 0x3b6f 0x2037 0x7f69 0x0936 0x651a 0x4ceb -+ 0x6218 0x79f3 0x383f 0x18d9 0x4f05 0x5c82 0x2912 0x6f17 -+ 0x6856 0x5938 0x1007 0x61ab 0x3e7f 0x57c2 0x542f 0x4f62 -+ 0x7454 0x2eac 0x7739 0x42d4 0x2f90 0x435a 0x2e52 0x2064 -+ 0x637c 0x66ad 0x2c90 0x0bad 0x759c 0x0029 0x0986 0x7126 -+ 0x1ca7 0x1605 0x386a 0x27f5 0x1380 0x6d75 0x24c3 0x0f8e -+ 0x2b7a 0x1418 0x1fd1 0x7dc1 0x2d8e 0x43af 0x2267 0x7da3 -+ 0x4e3d 0x1338 0x50db 0x454d 0x764d 0x40a3 0x42e6 0x262b -+ 0x2d2e 0x1aea 0x2e17 0x173d 0x3a6e 0x71bf 0x25f9 0x0a5d -+ 0x7c57 0x0fbe 0x46ce 0x4939 0x6b17 0x37bb 0x3e91 0x76db>; -+ }; -+ }; -+}; -+ diff --git a/target/linux/sunxi/patches-4.1/128-1-mtd-nand-store-timing-in-nand_chip.patch b/target/linux/sunxi/patches-4.1/128-1-mtd-nand-store-timing-in-nand_chip.patch deleted file mode 100644 index 5867dbb..0000000 --- a/target/linux/sunxi/patches-4.1/128-1-mtd-nand-store-timing-in-nand_chip.patch +++ /dev/null @@ -1,182 +0,0 @@ ---- a/drivers/mtd/nand/nand_base.c -+++ b/drivers/mtd/nand/nand_base.c -@@ -4249,6 +4249,8 @@ static inline bool is_full_id_nand(struc - static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip, - struct nand_flash_dev *type, const u8 *id_data, int *busw) - { -+ int mode; -+ - if (!strncmp(type->id, id_data, type->id_len)) { - mtd->writesize = type->pagesize; - mtd->erasesize = type->erasesize; -@@ -4259,8 +4261,9 @@ static bool find_full_id_nand(struct mtd - chip->options |= type->options; - chip->ecc_strength_ds = NAND_ECC_STRENGTH(type); - chip->ecc_step_ds = NAND_ECC_STEP(type); -- chip->onfi_timing_mode_default = -- type->onfi_timing_mode_default; -+ -+ mode = type->onfi_timing_mode_default; -+ chip->sdr_timings = onfi_async_timing_mode_to_sdr_timings(mode); - - *busw = type->options & NAND_BUSWIDTH_16; - ---- a/drivers/mtd/nand/sunxi_nand.c -+++ b/drivers/mtd/nand/sunxi_nand.c -@@ -1425,7 +1425,7 @@ static int sunxi_nand_chip_init_timings( - - mode = onfi_get_async_timing_mode(&chip->nand); - if (mode == ONFI_TIMING_MODE_UNKNOWN) { -- mode = chip->nand.onfi_timing_mode_default; -+ timings = chip->nand.sdr_timings; - } else { - uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {}; - -@@ -1439,9 +1439,10 @@ static int sunxi_nand_chip_init_timings( - feature); - if (ret) - return ret; -+ -+ timings = onfi_async_timing_mode_to_sdr_timings(mode); - } - -- timings = onfi_async_timing_mode_to_sdr_timings(mode); - if (IS_ERR(timings)) - return PTR_ERR(timings); - ---- a/include/linux/mtd/nand.h -+++ b/include/linux/mtd/nand.h -@@ -612,6 +612,55 @@ struct nand_buffers { - uint8_t *databuf; - }; - -+/* -+ * struct nand_sdr_timings - SDR NAND chip timings -+ * -+ * This struct defines the timing requirements of a SDR NAND chip. -+ * These informations can be found in every NAND datasheets and the timings -+ * meaning are described in the ONFI specifications: -+ * www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf (chapter 4.15 Timing -+ * Parameters) -+ * -+ * All these timings are expressed in picoseconds. -+ */ -+ -+struct nand_sdr_timings { -+ u32 tALH_min; -+ u32 tADL_min; -+ u32 tALS_min; -+ u32 tAR_min; -+ u32 tCEA_max; -+ u32 tCEH_min; -+ u32 tCH_min; -+ u32 tCHZ_max; -+ u32 tCLH_min; -+ u32 tCLR_min; -+ u32 tCLS_min; -+ u32 tCOH_min; -+ u32 tCS_min; -+ u32 tDH_min; -+ u32 tDS_min; -+ u32 tFEAT_max; -+ u32 tIR_min; -+ u32 tITC_max; -+ u32 tRC_min; -+ u32 tREA_max; -+ u32 tREH_min; -+ u32 tRHOH_min; -+ u32 tRHW_min; -+ u32 tRHZ_max; -+ u32 tRLOH_min; -+ u32 tRP_min; -+ u32 tRR_min; -+ u64 tRST_max; -+ u32 tWB_max; -+ u32 tWC_min; -+ u32 tWH_min; -+ u32 tWHR_min; -+ u32 tWP_min; -+ u32 tWW_min; -+}; -+ - /** - * struct nand_chip - NAND Private Flash Chip Data - * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the -@@ -676,11 +725,7 @@ struct nand_buffers { - * @ecc_step_ds: [INTERN] ECC step required by the @ecc_strength_ds, - * also from the datasheet. It is the recommended ECC step - * size, if known; if unknown, set to zero. -- * @onfi_timing_mode_default: [INTERN] default ONFI timing mode. This field is -- * either deduced from the datasheet if the NAND -- * chip is not ONFI compliant or set to 0 if it is -- * (an ONFI chip is always configured in mode 0 -- * after a NAND reset) -+ * @sdr_timings [INTERN] Pointer to default timings for SDR NAND. - * @numchips: [INTERN] number of physical chips - * @chipsize: [INTERN] the size of one chip for multichip arrays - * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1 -@@ -769,7 +814,7 @@ struct nand_chip { - uint8_t bits_per_cell; - uint16_t ecc_strength_ds; - uint16_t ecc_step_ds; -- int onfi_timing_mode_default; -+ const struct nand_sdr_timings *sdr_timings; - int badblockpos; - int badblockbits; - -@@ -1156,55 +1201,6 @@ struct ofnandpart_data { - int ofnandpart_parse(struct mtd_info *master, - const struct ofnandpart_data *data); - --/* -- * struct nand_sdr_timings - SDR NAND chip timings -- * -- * This struct defines the timing requirements of a SDR NAND chip. -- * These informations can be found in every NAND datasheets and the timings -- * meaning are described in the ONFI specifications: -- * www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf (chapter 4.15 Timing -- * Parameters) -- * -- * All these timings are expressed in picoseconds. -- */ -- --struct nand_sdr_timings { -- u32 tALH_min; -- u32 tADL_min; -- u32 tALS_min; -- u32 tAR_min; -- u32 tCEA_max; -- u32 tCEH_min; -- u32 tCH_min; -- u32 tCHZ_max; -- u32 tCLH_min; -- u32 tCLR_min; -- u32 tCLS_min; -- u32 tCOH_min; -- u32 tCS_min; -- u32 tDH_min; -- u32 tDS_min; -- u32 tFEAT_max; -- u32 tIR_min; -- u32 tITC_max; -- u32 tRC_min; -- u32 tREA_max; -- u32 tREH_min; -- u32 tRHOH_min; -- u32 tRHW_min; -- u32 tRHZ_max; -- u32 tRLOH_min; -- u32 tRP_min; -- u32 tRR_min; -- u64 tRST_max; -- u32 tWB_max; -- u32 tWC_min; -- u32 tWH_min; -- u32 tWHR_min; -- u32 tWP_min; -- u32 tWW_min; --}; -- - /* get timing characteristics from ONFI timing mode. */ - const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode); - #endif /* __LINUX_MTD_NAND_H */ diff --git a/target/linux/sunxi/patches-4.1/128-2-mtd-nand-support-non-ONFI-timings.patch b/target/linux/sunxi/patches-4.1/128-2-mtd-nand-support-non-ONFI-timings.patch deleted file mode 100644 index 03c7f26..0000000 --- a/target/linux/sunxi/patches-4.1/128-2-mtd-nand-support-non-ONFI-timings.patch +++ /dev/null @@ -1,28 +0,0 @@ ---- a/drivers/mtd/nand/nand_base.c -+++ b/drivers/mtd/nand/nand_base.c -@@ -4262,8 +4262,13 @@ static bool find_full_id_nand(struct mtd - chip->ecc_strength_ds = NAND_ECC_STRENGTH(type); - chip->ecc_step_ds = NAND_ECC_STEP(type); - -- mode = type->onfi_timing_mode_default; -- chip->sdr_timings = onfi_async_timing_mode_to_sdr_timings(mode); -+ if (type->custom_sdr_timing) { -+ chip->sdr_timings = type->custom_sdr_timing; -+ } else { -+ mode = type->onfi_timing_mode_default; -+ chip->sdr_timings = -+ onfi_async_timing_mode_to_sdr_timings(mode); -+ } - - *busw = type->options & NAND_BUSWIDTH_16; - ---- a/include/linux/mtd/nand.h -+++ b/include/linux/mtd/nand.h -@@ -988,6 +988,7 @@ struct nand_flash_dev { - uint16_t step_ds; - } ecc; - int onfi_timing_mode_default; -+ const struct nand_sdr_timings *custom_sdr_timing; - }; - - /** diff --git a/target/linux/sunxi/patches-4.1/128-3-mtd-nand-add-H27UBG8T2BTR-BC.patch b/target/linux/sunxi/patches-4.1/128-3-mtd-nand-add-H27UBG8T2BTR-BC.patch deleted file mode 100644 index 49ec6b0..0000000 --- a/target/linux/sunxi/patches-4.1/128-3-mtd-nand-add-H27UBG8T2BTR-BC.patch +++ /dev/null @@ -1,63 +0,0 @@ ---- a/drivers/mtd/nand/nand_ids.c -+++ b/drivers/mtd/nand/nand_ids.c -@@ -19,6 +19,49 @@ - #define SP_OPTIONS16 (SP_OPTIONS | NAND_BUSWIDTH_16) - - /* -+ * Hynix H27UBG8T2BTR timings -+ * This chip has an exceptionally large tADL, which results in only supporting -+ * ONFI timing mode 0. Using these timings, the clock can be raised from -+ * 12.5MHz to 50MHz. -+ */ -+const struct nand_sdr_timings hynix_h27ubg8t2btr_sdr_timing = { -+ .tADL_min = 200000, -+ .tALH_min = 5000, -+ .tALS_min = 10000, -+ .tAR_min = 10000, -+ .tCEA_max = 100000, -+ .tCEH_min = 20000, -+ .tCH_min = 5000, -+ .tCHZ_max = 50000, -+ .tCLH_min = 5000, -+ .tCLR_min = 10000, -+ .tCLS_min = 10000, -+ .tCOH_min = 15000, -+ .tCS_min = 20000, -+ .tDH_min = 5000, -+ .tDS_min = 10000, -+ .tFEAT_max = 1000000, -+ .tIR_min = 0, -+ .tITC_max = 1000000, -+ .tRC_min = 20000, -+ .tREA_max = 16000, -+ .tREH_min = 8000, -+ .tRHOH_min = 15000, -+ .tRHW_min = 100000, -+ .tRHZ_max = 100000, -+ .tRLOH_min = 5000, -+ .tRP_min = 10000, -+ .tRST_max = 500000000, -+ .tWB_max = 100000, -+ .tRR_min = 20000, -+ .tWC_min = 20000, -+ .tWH_min = 10000, -+ .tWHR_min = 80000, -+ .tWP_min = 8000, -+ .tWW_min = 100000, -+}; -+ -+/* - * The chip ID list: - * name, device ID, page size, chip size in MiB, eraseblock size, options - * -@@ -50,6 +93,10 @@ struct nand_flash_dev nand_flash_ids[] = - { .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} }, - SZ_8K, SZ_8K, SZ_2M, 0, 6, 640, NAND_ECC_INFO(40, SZ_1K), - 4 }, -+ {"H27UBG8T2BTR-BC 64G 3.3V 8-bit", -+ { .id = {0xad, 0xd7, 0x94, 0xda, 0x74, 0xc3} }, -+ SZ_8K, SZ_4K, SZ_2M, 0, 6, 640, NAND_ECC_INFO(40, SZ_1K), -+ 0, &hynix_h27ubg8t2btr_sdr_timing }, - - LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS), - LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS), diff --git a/target/linux/sunxi/patches-4.1/129-nand-sunxi-fix-write-to-USER_DATA-a13.patch b/target/linux/sunxi/patches-4.1/129-nand-sunxi-fix-write-to-USER_DATA-a13.patch deleted file mode 100644 index ae2775d..0000000 --- a/target/linux/sunxi/patches-4.1/129-nand-sunxi-fix-write-to-USER_DATA-a13.patch +++ /dev/null @@ -1,78 +0,0 @@ -From b1488f1a55da6a297ac4e8e9140922f35b7583c5 Mon Sep 17 00:00:00 2001 -From: Boris Brezillon <boris.brezillon@free-electrons.com> -Date: Mon, 15 Jun 2015 11:09:58 +0200 -Subject: [PATCH] nand: sunxi: fix write to USER_DATA reg - -The USER_DATA register cannot be updated with readb on A13 SoCs, thus -triggering a bug when using memcpy_toio on this register. -Use writel (plus a temporary variable to old the USER_DATA value) to -address that problem. - -Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> ---- - drivers/mtd/nand/sunxi_nand.c | 38 +++++++++++++++++++++----------------- - 1 file changed, 21 insertions(+), 17 deletions(-) - ---- a/drivers/mtd/nand/sunxi_nand.c -+++ b/drivers/mtd/nand/sunxi_nand.c -@@ -908,7 +908,7 @@ static int sunxi_nfc_hw_ecc_write_page(s - - for (i = 0; i < ecc->steps; i++) { - bool rndactiv = false; -- u8 oob_buf[4]; -+ u32 user_data; - - if (i) - chip->cmdfunc(mtd, NAND_CMD_RNDIN, i * ecc->size, -1); -@@ -919,15 +919,13 @@ static int sunxi_nfc_hw_ecc_write_page(s - offset = layout->eccpos[i * ecc->bytes] - 4 + mtd->writesize; - - /* Fill OOB data in */ -- if (!oob_required) -- memset(oob_buf, 0xff, 4); -- else -- memcpy(oob_buf, -- chip->oob_poi + layout->oobfree[i].offset, -- 4); -- -- -- memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, oob_buf, 4); -+ if (!oob_required) { -+ user_data = 0xffffffff; -+ } else { -+ memcpy(&user_data, -+ chip->oob_poi + layout->oobfree[i].offset, 4); -+ user_data = le32_to_cpu(user_data); -+ } - - if (i) { - cnt = ecc->bytes + 4; -@@ -946,12 +944,16 @@ static int sunxi_nfc_hw_ecc_write_page(s - if (rndactiv) { - /* pre randomize to generate FF patterns on the NAND */ - if (!i) { -+ u8 oob_tmp[2]; - u16 state = rnd->subseeds[rnd->page % rnd->nseeds]; -+ oob_tmp[0] = user_data; -+ oob_tmp[1] = user_data >> 8; - state = sunxi_nfc_hwrnd_single_step(state, 15); -- oob_buf[0] ^= state; -+ oob_tmp[0] ^= state; - state = sunxi_nfc_hwrnd_step(rnd, state, 1); -- oob_buf[1] ^= state; -- memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, oob_buf, 4); -+ oob_tmp[1] ^= state; -+ user_data &= ~0xffff; -+ user_data |= oob_tmp[0] | (oob_tmp[1] << 8); - } - tmp = readl(nfc->regs + NFC_REG_ECC_CTL); - tmp &= ~(NFC_RANDOM_DIRECTION | NFC_ECC_EXCEPTION); -@@ -959,6 +961,8 @@ static int sunxi_nfc_hw_ecc_write_page(s - writel(tmp, nfc->regs + NFC_REG_ECC_CTL); - } - -+ writel(user_data, nfc->regs + NFC_REG_USER_DATA_BASE); -+ - chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1); - - ret = sunxi_nfc_wait_cmd_fifo_empty(nfc); diff --git a/target/linux/sunxi/patches-4.1/140-mmc-sdio-reliability-fix.patch b/target/linux/sunxi/patches-4.1/140-mmc-sdio-reliability-fix.patch deleted file mode 100644 index 76bc222..0000000 --- a/target/linux/sunxi/patches-4.1/140-mmc-sdio-reliability-fix.patch +++ /dev/null @@ -1,86 +0,0 @@ -From 8a7013f47196abed7e6a40e93d1de1639cd46228 Mon Sep 17 00:00:00 2001 -From: Hans de Goede <hdegoede@redhat.com> -Date: Fri, 10 Jul 2015 17:03:03 +0200 -Subject: [PATCH] mmc: sunxi: Don't start commands while the card is busy - -Some sdio wifi modules have not been working reliable with the sunxi-mmc -host code. This turns out to be caused by it starting new commands while -the card signals that it is still busy processing a previous command. - -This commit fixes this, thereby fixing the wifi reliability issues on -the Cubietruck and other sunxi boards using sdio wifi. - -Reported-by: Eugene K <sigintmailru@gmail.com> -Suggested-by: Eugene K <sigintmailru@gmail.com> -Cc: Eugene K <sigintmailru@gmail.com> -Cc: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- -Changes in v2: --Properly accredit Eugene K for coming up with the fix for this ---- - drivers/mmc/host/sunxi-mmc.c | 32 ++++++++++++++++++++++++++++++++ - 1 file changed, 32 insertions(+) - ---- a/drivers/mmc/host/sunxi-mmc.c -+++ b/drivers/mmc/host/sunxi-mmc.c -@@ -289,6 +289,24 @@ static int sunxi_mmc_init_host(struct mm - return 0; - } - -+/* Wait for card to report ready before starting a new cmd */ -+static int sunxi_mmc_wait_card_ready(struct sunxi_mmc_host *host) -+{ -+ unsigned long expire = jiffies + msecs_to_jiffies(500); -+ u32 rval; -+ -+ do { -+ rval = mmc_readl(host, REG_STAS); -+ } while (time_before(jiffies, expire) && (rval & SDXC_CARD_DATA_BUSY)); -+ -+ if (rval & SDXC_CARD_DATA_BUSY) { -+ dev_err(mmc_dev(host->mmc), "Error R1 ready timeout\n"); -+ return -EIO; -+ } -+ -+ return 0; -+} -+ - static void sunxi_mmc_init_idma_des(struct sunxi_mmc_host *host, - struct mmc_data *data) - { -@@ -383,6 +401,8 @@ static void sunxi_mmc_send_manual_stop(s - u32 arg, cmd_val, ri; - unsigned long expire = jiffies + msecs_to_jiffies(1000); - -+ sunxi_mmc_wait_card_ready(host); -+ - cmd_val = SDXC_START | SDXC_RESP_EXPIRE | - SDXC_STOP_ABORT_CMD | SDXC_CHECK_RESPONSE_CRC; - -@@ -597,6 +617,11 @@ static int sunxi_mmc_oclk_onoff(struct s - { - unsigned long expire = jiffies + msecs_to_jiffies(250); - u32 rval; -+ int ret; -+ -+ ret = sunxi_mmc_wait_card_ready(host); -+ if (ret) -+ return ret; - - rval = mmc_readl(host, REG_CLKCR); - rval &= ~(SDXC_CARD_CLOCK_ON | SDXC_LOW_POWER_ON); -@@ -784,6 +809,13 @@ static void sunxi_mmc_request(struct mmc - mmc_request_done(mmc, mrq); - return; - } -+ -+ ret = sunxi_mmc_wait_card_ready(host); -+ if (ret) { -+ mrq->cmd->error = ret; -+ mmc_request_done(mmc, mrq); -+ return; -+ } - - if (data) { - ret = sunxi_mmc_map_dma(host, data); diff --git a/target/linux/sunxi/patches-4.1/142-arm-add-sunxi-h3.patch b/target/linux/sunxi/patches-4.1/142-arm-add-sunxi-h3.patch deleted file mode 100644 index 2545f8a..0000000 --- a/target/linux/sunxi/patches-4.1/142-arm-add-sunxi-h3.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 14a882df14a5ae859b245bc708ce3fce47a91594 Mon Sep 17 00:00:00 2001 -From: Jens Kuske <jenskuske@gmail.com> -Date: Fri, 15 May 2015 18:38:55 +0200 -Subject: ARM: sunxi: Introduce Allwinner H3 support - -The Allwinner H3 is a quad-core Cortex-A7-based SoC. It is very similar -to other sun8i family SoCs like the A23. - -Signed-off-by: Jens Kuske <jenskuske@gmail.com> -Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> - ---- a/Documentation/devicetree/bindings/arm/sunxi.txt -+++ b/Documentation/devicetree/bindings/arm/sunxi.txt -@@ -9,4 +9,5 @@ using one of the following compatible st - allwinner,sun6i-a31 - allwinner,sun7i-a20 - allwinner,sun8i-a23 -+ allwinner,sun8i-h3 - allwinner,sun9i-a80 ---- a/arch/arm/mach-sunxi/Kconfig -+++ b/arch/arm/mach-sunxi/Kconfig -@@ -35,7 +35,7 @@ config MACH_SUN7I - select SUN5I_HSTIMER - - config MACH_SUN8I -- bool "Allwinner A23 (sun8i) SoCs support" -+ bool "Allwinner sun8i Family SoCs support" - default ARCH_SUNXI - select ARM_GIC - select MFD_SUN6I_PRCM ---- a/arch/arm/mach-sunxi/sunxi.c -+++ b/arch/arm/mach-sunxi/sunxi.c -@@ -67,10 +67,12 @@ MACHINE_END - - static const char * const sun8i_board_dt_compat[] = { - "allwinner,sun8i-a23", -+ "allwinner,sun8i-h3", - NULL, - }; - --DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i (A23) Family") -+DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i Family") -+ .init_time = sun6i_timer_init, - .dt_compat = sun8i_board_dt_compat, - .init_late = sunxi_dt_cpufreq_init, - MACHINE_END diff --git a/target/linux/sunxi/patches-4.1/143-dmaengine-add-h3.patch b/target/linux/sunxi/patches-4.1/143-dmaengine-add-h3.patch deleted file mode 100644 index df434a4..0000000 --- a/target/linux/sunxi/patches-4.1/143-dmaengine-add-h3.patch +++ /dev/null @@ -1,38 +0,0 @@ ---- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt -+++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt -@@ -4,7 +4,10 @@ This driver follows the generic DMA bind - - Required properties: - --- compatible: Must be "allwinner,sun6i-a31-dma" or "allwinner,sun8i-a23-dma" -+- compatible: Must be one of -+ "allwinner,sun6i-a31-dma" -+ "allwinner,sun8i-a23-dma" -+ "allwinner,sun8i-h3-dma" - - reg: Should contain the registers base address and length - - interrupts: Should contain a reference to the interrupt used by this device - - clocks: Should contain a reference to the parent AHB clock ---- a/drivers/dma/sun6i-dma.c -+++ b/drivers/dma/sun6i-dma.c -@@ -891,9 +891,21 @@ static struct sun6i_dma_config sun8i_a23 - .nr_max_vchans = 37, - }; - -+/* -+ * The H3 has 12 physical channels, a maximum DRQ port id of 27, -+ * and a total of 34 usable source and destination endpoints. -+ */ -+ -+static struct sun6i_dma_config sun8i_h3_dma_cfg = { -+ .nr_max_channels = 12, -+ .nr_max_requests = 27, -+ .nr_max_vchans = 34, -+}; -+ - static const struct of_device_id sun6i_dma_match[] = { - { .compatible = "allwinner,sun6i-a31-dma", .data = &sun6i_a31_dma_cfg }, - { .compatible = "allwinner,sun8i-a23-dma", .data = &sun8i_a23_dma_cfg }, -+ { .compatible = "allwinner,sun8i-h3-dma", .data = &sun8i_h3_dma_cfg }, - { /* sentinel */ } - }; - diff --git a/target/linux/sunxi/patches-4.1/160-dmaengine-add-sun4i-driver.patch b/target/linux/sunxi/patches-4.1/160-dmaengine-add-sun4i-driver.patch deleted file mode 100644 index 471fb2a..0000000 --- a/target/linux/sunxi/patches-4.1/160-dmaengine-add-sun4i-driver.patch +++ /dev/null @@ -1,1371 +0,0 @@ -From 1a28c76f3965775854ed6f6229de457c3d0674ab Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar> -Date: Sat, 4 Apr 2015 11:37:24 +0200 -Subject: [PATCH] dma: sun4i: Add support for the DMA engine on sun[457]i SoCs -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This patch adds support for the DMA engine present on Allwinner A10, -A13, A10S and A20 SoCs. This engine has two kinds of channels: normal -and dedicated. The main difference is in the mode of operation; -while a single normal channel may be operating at any given time, -dedicated channels may operate simultaneously provided there is no -overlap of source or destination. - -Hardware documentation can be found on A10 User Manual (section 12), A13 -User Manual (section 14) and A20 User Manual (section 1.12) - -Signed-off-by: Emilio López <emilio@elopez.com.ar> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - -Changes from v4: - * Fix for interrupt triggering after freeing a dma-channel, this fixed - the problems with jack - * Adjust to recent kernel dma API changes - -Changes from v3: - * Drop threaded IRQ to get lower latency - * Drop chancnt - * Fix crash on first use when using a DMA-aware bootloader (eg., one - that supports NAND) - -Changes from v2: - * Faster memcpy - * Quicker cyclic transfers - * Address some stylistic and locking comments from Maxime - * probably some more stuff I'm forgetting - -Changes from v1: - * address comments from Chen-Yu and Maxime - * fix issue converting bus width - * switch to using a threaded IRQ instead of a tasklet on - recommendation from Maxime - * fix issue setting magic timing parameter for SPI transfers - * fix an issue with list handling reported by the kbuild 0-DAY robot (thanks!) - * drop a lot of unused #define - * probably some more stuff I'm forgetting ---- - .../devicetree/bindings/dma/sun4i-dma.txt | 46 + - drivers/dma/Kconfig | 11 + - drivers/dma/Makefile | 1 + - drivers/dma/sun4i-dma.c | 1235 ++++++++++++++++++++ - 4 files changed, 1293 insertions(+) - create mode 100644 Documentation/devicetree/bindings/dma/sun4i-dma.txt - create mode 100644 drivers/dma/sun4i-dma.c - ---- /dev/null -+++ b/Documentation/devicetree/bindings/dma/sun4i-dma.txt -@@ -0,0 +1,46 @@ -+Allwinner A10 DMA Controller -+ -+This driver follows the generic DMA bindings defined in dma.txt. -+ -+Required properties: -+ -+- compatible: Must be "allwinner,sun4i-a10-dma" -+- reg: Should contain the registers base address and length -+- interrupts: Should contain a reference to the interrupt used by this device -+- clocks: Should contain a reference to the parent AHB clock -+- #dma-cells : Should be 2, first cell denoting normal or dedicated dma, -+ second cell holding the request line number. -+ -+Example: -+ dma: dma-controller@01c02000 { -+ compatible = "allwinner,sun4i-a10-dma"; -+ reg = <0x01c02000 0x1000>; -+ interrupts = <27>; -+ clocks = <&ahb_gates 6>; -+ #dma-cells = <2>; -+ }; -+ -+Clients: -+ -+DMA clients connected to the Allwinner A10 DMA controller must use the -+format described in the dma.txt file, using a three-cell specifier for -+each channel: a phandle plus two integer cells. -+The three cells in order are: -+ -+1. A phandle pointing to the DMA controller. -+2. Whether it is using normal (0) or dedicated (1) channels -+3. The port ID as specified in the datasheet -+ -+Example: -+ spi2: spi@01c17000 { -+ compatible = "allwinner,sun4i-a10-spi"; -+ reg = <0x01c17000 0x1000>; -+ interrupts = <0 12 4>; -+ clocks = <&ahb_gates 22>, <&spi2_clk>; -+ clock-names = "ahb", "mod"; -+ dmas = <&dma 1 29>, <&dma 1 28>; -+ dma-names = "rx", "tx"; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; ---- a/drivers/dma/Kconfig -+++ b/drivers/dma/Kconfig -@@ -444,6 +444,17 @@ config XGENE_DMA - help - Enable support for the APM X-Gene SoC DMA engine. - -+config SUN4I_DMA -+ tristate "Allwinner A10 DMA support" -+ depends on (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || (COMPILE_TEST && OF && ARM)) -+ default (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I) -+ select DMA_ENGINE -+ select DMA_OF -+ select DMA_VIRTUAL_CHANNELS -+ help -+ Enable support for the DMA controller present in the sun4i, -+ sun5i and sun7i Allwinner ARM SoCs. -+ - config DMA_ENGINE - bool - ---- a/drivers/dma/Makefile -+++ b/drivers/dma/Makefile -@@ -54,3 +54,4 @@ obj-$(CONFIG_NBPFAXI_DMA) += nbpfaxi.o - obj-$(CONFIG_DMA_SUN6I) += sun6i-dma.o - obj-$(CONFIG_IMG_MDC_DMA) += img-mdc-dma.o - obj-$(CONFIG_XGENE_DMA) += xgene-dma.o -+obj-$(CONFIG_SUN4I_DMA) += sun4i-dma.o ---- /dev/null -+++ b/drivers/dma/sun4i-dma.c -@@ -0,0 +1,1235 @@ -+/* -+ * Copyright (C) 2014 Emilio López -+ * Emilio López <emilio@elopez.com.ar> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#include <linux/bitmap.h> -+#include <linux/bitops.h> -+#include <linux/clk.h> -+#include <linux/dmaengine.h> -+#include <linux/dmapool.h> -+#include <linux/interrupt.h> -+#include <linux/module.h> -+#include <linux/of_dma.h> -+#include <linux/platform_device.h> -+#include <linux/slab.h> -+#include <linux/spinlock.h> -+ -+#include "virt-dma.h" -+ -+/** Normal DMA register values **/ -+ -+/* Normal DMA source/destination data request type values */ -+#define NDMA_DRQ_TYPE_SDRAM 0x16 -+#define NDMA_DRQ_TYPE_LIMIT (0x1F + 1) -+ -+/** Normal DMA register layout **/ -+ -+/* Normal DMA configuration register layout */ -+#define NDMA_CFG_LOADING BIT(31) -+#define NDMA_CFG_CONT_MODE BIT(30) -+#define NDMA_CFG_WAIT_STATE(n) ((n) << 27) -+#define NDMA_CFG_DEST_DATA_WIDTH(width) ((width) << 25) -+#define NDMA_CFG_DEST_BURST_LENGTH(len) ((len) << 23) -+#define NDMA_CFG_DEST_NON_SECURE BIT(22) -+#define NDMA_CFG_DEST_FIXED_ADDR BIT(21) -+#define NDMA_CFG_DEST_DRQ_TYPE(type) ((type) << 16) -+#define NDMA_CFG_BYTE_COUNT_MODE_REMAIN BIT(15) -+#define NDMA_CFG_SRC_DATA_WIDTH(width) ((width) << 9) -+#define NDMA_CFG_SRC_BURST_LENGTH(len) ((len) << 7) -+#define NDMA_CFG_SRC_NON_SECURE BIT(6) -+#define NDMA_CFG_SRC_FIXED_ADDR BIT(5) -+#define NDMA_CFG_SRC_DRQ_TYPE(type) ((type) << 0) -+ -+/** Dedicated DMA register values **/ -+ -+/* Dedicated DMA source/destination address mode values */ -+#define DDMA_ADDR_MODE_LINEAR 0 -+#define DDMA_ADDR_MODE_IO 1 -+#define DDMA_ADDR_MODE_HORIZONTAL_PAGE 2 -+#define DDMA_ADDR_MODE_VERTICAL_PAGE 3 -+ -+/* Dedicated DMA source/destination data request type values */ -+#define DDMA_DRQ_TYPE_SDRAM 0x1 -+#define DDMA_DRQ_TYPE_LIMIT (0x1F + 1) -+ -+/** Dedicated DMA register layout **/ -+ -+/* Dedicated DMA configuration register layout */ -+#define DDMA_CFG_LOADING BIT(31) -+#define DDMA_CFG_BUSY BIT(30) -+#define DDMA_CFG_CONT_MODE BIT(29) -+#define DDMA_CFG_DEST_NON_SECURE BIT(28) -+#define DDMA_CFG_DEST_DATA_WIDTH(width) ((width) << 25) -+#define DDMA_CFG_DEST_BURST_LENGTH(len) ((len) << 23) -+#define DDMA_CFG_DEST_ADDR_MODE(mode) ((mode) << 21) -+#define DDMA_CFG_DEST_DRQ_TYPE(type) ((type) << 16) -+#define DDMA_CFG_BYTE_COUNT_MODE_REMAIN BIT(15) -+#define DDMA_CFG_SRC_NON_SECURE BIT(12) -+#define DDMA_CFG_SRC_DATA_WIDTH(width) ((width) << 9) -+#define DDMA_CFG_SRC_BURST_LENGTH(len) ((len) << 7) -+#define DDMA_CFG_SRC_ADDR_MODE(mode) ((mode) << 5) -+#define DDMA_CFG_SRC_DRQ_TYPE(type) ((type) << 0) -+ -+/* Dedicated DMA parameter register layout */ -+#define DDMA_PARA_DEST_DATA_BLK_SIZE(n) (((n) - 1) << 24) -+#define DDMA_PARA_DEST_WAIT_CYCLES(n) (((n) - 1) << 16) -+#define DDMA_PARA_SRC_DATA_BLK_SIZE(n) (((n) - 1) << 8) -+#define DDMA_PARA_SRC_WAIT_CYCLES(n) (((n) - 1) << 0) -+ -+/** DMA register offsets **/ -+ -+/* General register offsets */ -+#define DMA_IRQ_ENABLE_REG 0x0 -+#define DMA_IRQ_PENDING_STATUS_REG 0x4 -+ -+/* Normal DMA register offsets */ -+#define NDMA_CHANNEL_REG_BASE(n) (0x100 + (n) * 0x20) -+#define NDMA_CFG_REG 0x0 -+#define NDMA_SRC_ADDR_REG 0x4 -+#define NDMA_DEST_ADDR_REG 0x8 -+#define NDMA_BYTE_COUNT_REG 0xC -+ -+/* Dedicated DMA register offsets */ -+#define DDMA_CHANNEL_REG_BASE(n) (0x300 + (n) * 0x20) -+#define DDMA_CFG_REG 0x0 -+#define DDMA_SRC_ADDR_REG 0x4 -+#define DDMA_DEST_ADDR_REG 0x8 -+#define DDMA_BYTE_COUNT_REG 0xC -+#define DDMA_PARA_REG 0x18 -+ -+/** DMA Driver **/ -+ -+/* -+ * Normal DMA has 8 channels, and Dedicated DMA has another 8, so that's -+ * 16 channels. As for endpoints, there's 29 and 21 respectively. Given -+ * that the Normal DMA endpoints (other than SDRAM) can be used as tx/rx, -+ * we need 78 vchans in total -+ */ -+#define NDMA_NR_MAX_CHANNELS 8 -+#define DDMA_NR_MAX_CHANNELS 8 -+#define DMA_NR_MAX_CHANNELS (NDMA_NR_MAX_CHANNELS + DDMA_NR_MAX_CHANNELS) -+#define NDMA_NR_MAX_VCHANS (29 * 2 - 1) -+#define DDMA_NR_MAX_VCHANS 21 -+#define DMA_NR_MAX_VCHANS (NDMA_NR_MAX_VCHANS + DDMA_NR_MAX_VCHANS) -+ -+/* This set of DDMA timing parameters were found experimentally while -+ * working with the SPI driver and seem to make it behave correctly */ -+#define DDMA_MAGIC_SPI_PARAMETERS (DDMA_PARA_DEST_DATA_BLK_SIZE(1) | \ -+ DDMA_PARA_SRC_DATA_BLK_SIZE(1) | \ -+ DDMA_PARA_DEST_WAIT_CYCLES(2) | \ -+ DDMA_PARA_SRC_WAIT_CYCLES(2)) -+ -+struct sun4i_dma_pchan { -+ /* Register base of channel */ -+ void __iomem *base; -+ /* vchan currently being serviced */ -+ struct sun4i_dma_vchan *vchan; -+ /* Is this a dedicated pchan? */ -+ int is_dedicated; -+}; -+ -+struct sun4i_dma_vchan { -+ struct virt_dma_chan vc; -+ struct dma_slave_config cfg; -+ struct sun4i_dma_pchan *pchan; -+ struct sun4i_dma_promise *processing; -+ struct sun4i_dma_contract *contract; -+ u8 endpoint; -+ int is_dedicated; -+}; -+ -+struct sun4i_dma_promise { -+ u32 cfg; -+ u32 para; -+ dma_addr_t src; -+ dma_addr_t dst; -+ size_t len; -+ struct list_head list; -+}; -+ -+/* A contract is a set of promises */ -+struct sun4i_dma_contract { -+ struct virt_dma_desc vd; -+ struct list_head demands; -+ struct list_head completed_demands; -+ int is_cyclic; -+}; -+ -+struct sun4i_dma_dev { -+ DECLARE_BITMAP(pchans_used, DMA_NR_MAX_CHANNELS); -+ struct dma_device slave; -+ struct sun4i_dma_pchan *pchans; -+ struct sun4i_dma_vchan *vchans; -+ void __iomem *base; -+ struct clk *clk; -+ int irq; -+ spinlock_t lock; -+}; -+ -+static struct sun4i_dma_dev *to_sun4i_dma_dev(struct dma_device *dev) -+{ -+ return container_of(dev, struct sun4i_dma_dev, slave); -+} -+ -+static struct sun4i_dma_vchan *to_sun4i_dma_vchan(struct dma_chan *chan) -+{ -+ return container_of(chan, struct sun4i_dma_vchan, vc.chan); -+} -+ -+static struct sun4i_dma_contract *to_sun4i_dma_contract(struct virt_dma_desc *vd) -+{ -+ return container_of(vd, struct sun4i_dma_contract, vd); -+} -+ -+static struct device *chan2dev(struct dma_chan *chan) -+{ -+ return &chan->dev->device; -+} -+ -+static int convert_burst(u32 maxburst) -+{ -+ if (maxburst > 8) -+ return -EINVAL; -+ -+ /* 1 -> 0, 4 -> 1, 8 -> 2 */ -+ return (maxburst >> 2); -+} -+ -+static int convert_buswidth(enum dma_slave_buswidth addr_width) -+{ -+ if (addr_width > DMA_SLAVE_BUSWIDTH_4_BYTES) -+ return -EINVAL; -+ -+ /* 8 (1 byte) -> 0, 16 (2 bytes) -> 1, 32 (4 bytes) -> 2 */ -+ return (addr_width >> 1); -+} -+ -+static int choose_optimal_buswidth(dma_addr_t addr) -+{ -+ /* On 32 bit aligned addresses, we can use a 32 bit bus width */ -+ if (addr % 4 == 0) -+ return DMA_SLAVE_BUSWIDTH_4_BYTES; -+ /* On 16 bit aligned addresses, we can use a 16 bit bus width */ -+ else if (addr % 2 == 0) -+ return DMA_SLAVE_BUSWIDTH_2_BYTES; -+ -+ /* Worst-case scenario, we need to do byte aligned reads */ -+ return DMA_SLAVE_BUSWIDTH_1_BYTE; -+} -+ -+static void sun4i_dma_free_chan_resources(struct dma_chan *chan) -+{ -+ struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan); -+ -+ vchan_free_chan_resources(&vchan->vc); -+} -+ -+static struct sun4i_dma_pchan *find_and_use_pchan(struct sun4i_dma_dev *priv, -+ struct sun4i_dma_vchan *vchan) -+{ -+ struct sun4i_dma_pchan *pchan = NULL, *pchans = priv->pchans; -+ unsigned long flags; -+ int i, max; -+ -+ /* -+ * pchans 0-NDMA_NR_MAX_CHANNELS are normal, and -+ * NDMA_NR_MAX_CHANNELS+ are dedicated ones -+ */ -+ if (vchan->is_dedicated) { -+ i = NDMA_NR_MAX_CHANNELS; -+ max = DMA_NR_MAX_CHANNELS; -+ } else { -+ i = 0; -+ max = NDMA_NR_MAX_CHANNELS; -+ } -+ -+ spin_lock_irqsave(&priv->lock, flags); -+ for_each_clear_bit_from(i, &priv->pchans_used, max) { -+ pchan = &pchans[i]; -+ pchan->vchan = vchan; -+ set_bit(i, priv->pchans_used); -+ break; -+ } -+ spin_unlock_irqrestore(&priv->lock, flags); -+ -+ return pchan; -+} -+ -+static void release_pchan(struct sun4i_dma_dev *priv, -+ struct sun4i_dma_pchan *pchan) -+{ -+ unsigned long flags; -+ int nr = pchan - priv->pchans; -+ -+ spin_lock_irqsave(&priv->lock, flags); -+ -+ pchan->vchan = NULL; -+ clear_bit(nr, priv->pchans_used); -+ -+ spin_unlock_irqrestore(&priv->lock, flags); -+} -+ -+static void configure_pchan(struct sun4i_dma_pchan *pchan, -+ struct sun4i_dma_promise *d) -+{ -+ /* -+ * Configure addresses and misc parameters depending on type -+ * DDMA has an extra field with timing parameters -+ */ -+ if (pchan->is_dedicated) { -+ writel_relaxed(d->src, pchan->base + DDMA_SRC_ADDR_REG); -+ writel_relaxed(d->dst, pchan->base + DDMA_DEST_ADDR_REG); -+ writel_relaxed(d->len, pchan->base + DDMA_BYTE_COUNT_REG); -+ writel_relaxed(d->para, pchan->base + DDMA_PARA_REG); -+ writel_relaxed(d->cfg, pchan->base + DDMA_CFG_REG); -+ } else { -+ writel_relaxed(d->src, pchan->base + NDMA_SRC_ADDR_REG); -+ writel_relaxed(d->dst, pchan->base + NDMA_DEST_ADDR_REG); -+ writel_relaxed(d->len, pchan->base + NDMA_BYTE_COUNT_REG); -+ writel_relaxed(d->cfg, pchan->base + NDMA_CFG_REG); -+ } -+} -+ -+static void set_pchan_interrupt(struct sun4i_dma_dev *priv, -+ struct sun4i_dma_pchan *pchan, -+ int half, int end) -+{ -+ u32 reg; -+ int pchan_number = pchan - priv->pchans; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&priv->lock, flags); -+ -+ reg = readl_relaxed(priv->base + DMA_IRQ_ENABLE_REG); -+ -+ if (half) -+ reg |= BIT(pchan_number * 2); -+ else -+ reg &= ~BIT(pchan_number * 2); -+ -+ if (end) -+ reg |= BIT(pchan_number * 2 + 1); -+ else -+ reg &= ~BIT(pchan_number * 2 + 1); -+ -+ writel_relaxed(reg, priv->base + DMA_IRQ_ENABLE_REG); -+ -+ spin_unlock_irqrestore(&priv->lock, flags); -+} -+ -+/** -+ * Execute pending operations on a vchan -+ * -+ * When given a vchan, this function will try to acquire a suitable -+ * pchan and, if successful, will configure it to fulfill a promise -+ * from the next pending contract. -+ * -+ * This function must be called with &vchan->vc.lock held. -+ */ -+static int __execute_vchan_pending(struct sun4i_dma_dev *priv, -+ struct sun4i_dma_vchan *vchan) -+{ -+ struct sun4i_dma_promise *promise = NULL; -+ struct sun4i_dma_contract *contract = NULL; -+ struct sun4i_dma_pchan *pchan; -+ struct virt_dma_desc *vd; -+ int ret; -+ -+ lockdep_assert_held(&vchan->vc.lock); -+ -+ /* We need a pchan to do anything, so secure one if available */ -+ pchan = find_and_use_pchan(priv, vchan); -+ if (!pchan) -+ return -EBUSY; -+ -+ /* -+ * Channel endpoints must not be repeated, so if this vchan -+ * has already submitted some work, we can't do anything else -+ */ -+ if (vchan->processing) { -+ dev_dbg(chan2dev(&vchan->vc.chan), -+ "processing something to this endpoint already\n"); -+ ret = -EBUSY; -+ goto release_pchan; -+ } -+ -+ do { -+ /* Figure out which contract we're working with today */ -+ vd = vchan_next_desc(&vchan->vc); -+ if (!vd) { -+ dev_dbg(chan2dev(&vchan->vc.chan), -+ "No pending contract found"); -+ ret = 0; -+ goto release_pchan; -+ } -+ -+ contract = to_sun4i_dma_contract(vd); -+ if (list_empty(&contract->demands)) { -+ /* The contract has been completed so mark it as such */ -+ list_del(&contract->vd.node); -+ vchan_cookie_complete(&contract->vd); -+ dev_dbg(chan2dev(&vchan->vc.chan), -+ "Empty contract found and marked complete"); -+ } -+ } while (list_empty(&contract->demands)); -+ -+ /* Now find out what we need to do */ -+ promise = list_first_entry(&contract->demands, -+ struct sun4i_dma_promise, list); -+ vchan->processing = promise; -+ -+ /* ... and make it reality */ -+ if (promise) { -+ vchan->contract = contract; -+ vchan->pchan = pchan; -+ set_pchan_interrupt(priv, pchan, contract->is_cyclic, 1); -+ configure_pchan(pchan, promise); -+ } -+ -+ return 0; -+ -+release_pchan: -+ release_pchan(priv, pchan); -+ return ret; -+} -+ -+/** -+ * Generate a promise, to be used in a normal DMA contract. -+ * -+ * A NDMA promise contains all the information required to program the -+ * normal part of the DMA Engine and get data copied. A non-executed -+ * promise will live in the demands list on a contract. Once it has been -+ * completed, it will be moved to the completed demands list for later freeing. -+ * All linked promises will be freed when the corresponding contract is freed -+ */ -+static struct sun4i_dma_promise * -+generate_ndma_promise(struct dma_chan *chan, dma_addr_t src, dma_addr_t dest, -+ size_t len, struct dma_slave_config *sconfig) -+{ -+ struct sun4i_dma_promise *promise; -+ int ret; -+ -+ promise = kzalloc(sizeof(*promise), GFP_NOWAIT); -+ if (!promise) -+ return NULL; -+ -+ promise->src = src; -+ promise->dst = dest; -+ promise->len = len; -+ promise->cfg = NDMA_CFG_LOADING | NDMA_CFG_BYTE_COUNT_MODE_REMAIN; -+ -+ /* Use sensible default values if client is using undefined ones */ -+ if (sconfig->src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) -+ sconfig->src_addr_width = sconfig->dst_addr_width; -+ if (sconfig->dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) -+ sconfig->dst_addr_width = sconfig->src_addr_width; -+ if (sconfig->src_maxburst == 0) -+ sconfig->src_maxburst = sconfig->dst_maxburst; -+ if (sconfig->dst_maxburst == 0) -+ sconfig->dst_maxburst = sconfig->src_maxburst; -+ -+ dev_dbg(chan2dev(chan), -+ "src burst %d, dst burst %d, src buswidth %d, dst buswidth %d", -+ sconfig->src_maxburst, sconfig->dst_maxburst, -+ sconfig->src_addr_width, sconfig->dst_addr_width); -+ -+ /* Source burst */ -+ ret = convert_burst(sconfig->src_maxburst); -+ if (IS_ERR_VALUE(ret)) -+ goto fail; -+ promise->cfg |= NDMA_CFG_SRC_BURST_LENGTH(ret); -+ -+ /* Destination burst */ -+ ret = convert_burst(sconfig->dst_maxburst); -+ if (IS_ERR_VALUE(ret)) -+ goto fail; -+ promise->cfg |= NDMA_CFG_DEST_BURST_LENGTH(ret); -+ -+ /* Source bus width */ -+ ret = convert_buswidth(sconfig->src_addr_width); -+ if (IS_ERR_VALUE(ret)) -+ goto fail; -+ promise->cfg |= NDMA_CFG_SRC_DATA_WIDTH(ret); -+ -+ /* Destination bus width */ -+ ret = convert_buswidth(sconfig->dst_addr_width); -+ if (IS_ERR_VALUE(ret)) -+ goto fail; -+ promise->cfg |= NDMA_CFG_DEST_DATA_WIDTH(ret); -+ -+ return promise; -+ -+fail: -+ kfree(promise); -+ return NULL; -+} -+ -+/** -+ * Generate a promise, to be used in a dedicated DMA contract. -+ * -+ * A DDMA promise contains all the information required to program the -+ * Dedicated part of the DMA Engine and get data copied. A non-executed -+ * promise will live in the demands list on a contract. Once it has been -+ * completed, it will be moved to the completed demands list for later freeing. -+ * All linked promises will be freed when the corresponding contract is freed -+ */ -+static struct sun4i_dma_promise * -+generate_ddma_promise(struct dma_chan *chan, dma_addr_t src, dma_addr_t dest, -+ size_t len, struct dma_slave_config *sconfig) -+{ -+ struct sun4i_dma_promise *promise; -+ int ret; -+ -+ promise = kzalloc(sizeof(*promise), GFP_NOWAIT); -+ if (!promise) -+ return NULL; -+ -+ promise->src = src; -+ promise->dst = dest; -+ promise->len = len; -+ promise->cfg = DDMA_CFG_LOADING | DDMA_CFG_BYTE_COUNT_MODE_REMAIN; -+ -+ /* Source burst */ -+ ret = convert_burst(sconfig->src_maxburst); -+ if (IS_ERR_VALUE(ret)) -+ goto fail; -+ promise->cfg |= DDMA_CFG_SRC_BURST_LENGTH(ret); -+ -+ /* Destination burst */ -+ ret = convert_burst(sconfig->dst_maxburst); -+ if (IS_ERR_VALUE(ret)) -+ goto fail; -+ promise->cfg |= DDMA_CFG_DEST_BURST_LENGTH(ret); -+ -+ /* Source bus width */ -+ ret = convert_buswidth(sconfig->src_addr_width); -+ if (IS_ERR_VALUE(ret)) -+ goto fail; -+ promise->cfg |= DDMA_CFG_SRC_DATA_WIDTH(ret); -+ -+ /* Destination bus width */ -+ ret = convert_buswidth(sconfig->dst_addr_width); -+ if (IS_ERR_VALUE(ret)) -+ goto fail; -+ promise->cfg |= DDMA_CFG_DEST_DATA_WIDTH(ret); -+ -+ return promise; -+ -+fail: -+ kfree(promise); -+ return NULL; -+} -+ -+/** -+ * Generate a contract -+ * -+ * Contracts function as DMA descriptors. As our hardware does not support -+ * linked lists, we need to implement SG via software. We use a contract -+ * to hold all the pieces of the request and process them serially one -+ * after another. Each piece is represented as a promise. -+ */ -+static struct sun4i_dma_contract *generate_dma_contract(void) -+{ -+ struct sun4i_dma_contract *contract; -+ -+ contract = kzalloc(sizeof(*contract), GFP_NOWAIT); -+ if (!contract) -+ return NULL; -+ -+ INIT_LIST_HEAD(&contract->demands); -+ INIT_LIST_HEAD(&contract->completed_demands); -+ -+ return contract; -+} -+ -+/** -+ * Get next promise on a cyclic transfer -+ * -+ * Cyclic contracts contain a series of promises which are executed on a -+ * loop. This function returns the next promise from a cyclic contract, -+ * so it can be programmed into the hardware. -+ */ -+static struct sun4i_dma_promise * -+get_next_cyclic_promise(struct sun4i_dma_contract *contract) -+{ -+ struct sun4i_dma_promise *promise; -+ -+ promise = list_first_entry_or_null(&contract->demands, -+ struct sun4i_dma_promise, list); -+ if (!promise) { -+ list_splice_init(&contract->completed_demands, -+ &contract->demands); -+ promise = list_first_entry(&contract->demands, -+ struct sun4i_dma_promise, list); -+ } -+ -+ return promise; -+} -+ -+/** -+ * Free a contract and all its associated promises -+ */ -+static void sun4i_dma_free_contract(struct virt_dma_desc *vd) -+{ -+ struct sun4i_dma_contract *contract = to_sun4i_dma_contract(vd); -+ struct sun4i_dma_promise *promise; -+ -+ /* Free all the demands and completed demands */ -+ list_for_each_entry(promise, &contract->demands, list) -+ kfree(promise); -+ -+ list_for_each_entry(promise, &contract->completed_demands, list) -+ kfree(promise); -+ -+ kfree(contract); -+} -+ -+static struct dma_async_tx_descriptor * -+sun4i_dma_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, -+ dma_addr_t src, size_t len, unsigned long flags) -+{ -+ struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan); -+ struct dma_slave_config *sconfig = &vchan->cfg; -+ struct sun4i_dma_promise *promise; -+ struct sun4i_dma_contract *contract; -+ -+ contract = generate_dma_contract(); -+ if (!contract) -+ return NULL; -+ -+ /* -+ * We can only do the copy to bus aligned addresses, so -+ * choose the best one so we get decent performance. We also -+ * maximize the burst size for this same reason. -+ */ -+ sconfig->src_addr_width = choose_optimal_buswidth(src); -+ sconfig->dst_addr_width = choose_optimal_buswidth(dest); -+ sconfig->src_maxburst = 8; -+ sconfig->dst_maxburst = 8; -+ -+ if (vchan->is_dedicated) -+ promise = generate_ddma_promise(chan, src, dest, len, sconfig); -+ else -+ promise = generate_ndma_promise(chan, src, dest, len, sconfig); -+ -+ if (!promise) { -+ kfree(contract); -+ return NULL; -+ } -+ -+ /* Configure memcpy mode */ -+ if (vchan->is_dedicated) { -+ promise->cfg |= DDMA_CFG_SRC_DRQ_TYPE(DDMA_DRQ_TYPE_SDRAM) | -+ DDMA_CFG_DEST_DRQ_TYPE(DDMA_DRQ_TYPE_SDRAM); -+ } else { -+ promise->cfg |= NDMA_CFG_SRC_DRQ_TYPE(NDMA_DRQ_TYPE_SDRAM) | -+ NDMA_CFG_DEST_DRQ_TYPE(NDMA_DRQ_TYPE_SDRAM); -+ } -+ -+ /* Fill the contract with our only promise */ -+ list_add_tail(&promise->list, &contract->demands); -+ -+ /* And add it to the vchan */ -+ return vchan_tx_prep(&vchan->vc, &contract->vd, flags); -+} -+ -+static struct dma_async_tx_descriptor * -+sun4i_dma_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf, size_t len, -+ size_t period_len, enum dma_transfer_direction dir, -+ unsigned long flags) -+{ -+ struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan); -+ struct dma_slave_config *sconfig = &vchan->cfg; -+ struct sun4i_dma_promise *promise; -+ struct sun4i_dma_contract *contract; -+ dma_addr_t src, dest; -+ u32 endpoints; -+ int nr_periods, offset, plength, i; -+ -+ if (!is_slave_direction(dir)) { -+ dev_err(chan2dev(chan), "Invalid DMA direction\n"); -+ return NULL; -+ } -+ -+ if (vchan->is_dedicated) { -+ /* -+ * As we are using this just for audio data, we need to use -+ * normal DMA. There is nothing stopping us from supporting -+ * dedicated DMA here as well, so if a client comes up and -+ * requires it, it will be simple to implement it. -+ */ -+ dev_err(chan2dev(chan), -+ "Cyclic transfers are only supported on Normal DMA\n"); -+ return NULL; -+ } -+ -+ contract = generate_dma_contract(); -+ if (!contract) -+ return NULL; -+ -+ contract->is_cyclic = 1; -+ -+ /* Figure out the endpoints and the address we need */ -+ if (dir == DMA_MEM_TO_DEV) { -+ src = buf; -+ dest = sconfig->dst_addr; -+ endpoints = NDMA_CFG_SRC_DRQ_TYPE(NDMA_DRQ_TYPE_SDRAM) | -+ NDMA_CFG_DEST_DRQ_TYPE(vchan->endpoint) | -+ NDMA_CFG_DEST_FIXED_ADDR; -+ } else { -+ src = sconfig->src_addr; -+ dest = buf; -+ endpoints = NDMA_CFG_SRC_DRQ_TYPE(vchan->endpoint) | -+ NDMA_CFG_SRC_FIXED_ADDR | -+ NDMA_CFG_DEST_DRQ_TYPE(NDMA_DRQ_TYPE_SDRAM); -+ } -+ -+ /* -+ * We will be using half done interrupts to make two periods -+ * out of a promise, so we need to program the DMA engine less -+ * often -+ */ -+ nr_periods = DIV_ROUND_UP(len / period_len, 2); -+ for (i = 0; i < nr_periods; i++) { -+ /* Calculate the offset in the buffer and the length needed */ -+ offset = i * period_len * 2; -+ plength = min((len - offset), (period_len * 2)); -+ if (dir == DMA_MEM_TO_DEV) -+ src = buf + offset; -+ else -+ dest = buf + offset; -+ -+ /* Make the promise */ -+ promise = generate_ndma_promise(chan, src, dest, -+ plength, sconfig); -+ if (!promise) { -+ /* TODO: should we free everything? */ -+ return NULL; -+ } -+ promise->cfg |= endpoints; -+ -+ /* Then add it to the contract */ -+ list_add_tail(&promise->list, &contract->demands); -+ } -+ -+ /* And add it to the vchan */ -+ return vchan_tx_prep(&vchan->vc, &contract->vd, flags); -+} -+ -+static struct dma_async_tx_descriptor * -+sun4i_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, -+ unsigned int sg_len, enum dma_transfer_direction dir, -+ unsigned long flags, void *context) -+{ -+ struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan); -+ struct dma_slave_config *sconfig = &vchan->cfg; -+ struct sun4i_dma_promise *promise; -+ struct sun4i_dma_contract *contract; -+ struct scatterlist *sg; -+ dma_addr_t srcaddr, dstaddr; -+ u32 endpoints, para; -+ int i; -+ -+ if (!sgl) -+ return NULL; -+ -+ if (!is_slave_direction(dir)) { -+ dev_err(chan2dev(chan), "Invalid DMA direction\n"); -+ return NULL; -+ } -+ -+ contract = generate_dma_contract(); -+ if (!contract) -+ return NULL; -+ -+ /* Figure out endpoints */ -+ if (vchan->is_dedicated && dir == DMA_MEM_TO_DEV) { -+ endpoints = DDMA_CFG_SRC_DRQ_TYPE(DDMA_DRQ_TYPE_SDRAM) | -+ DDMA_CFG_SRC_ADDR_MODE(DDMA_ADDR_MODE_LINEAR) | -+ DDMA_CFG_DEST_DRQ_TYPE(vchan->endpoint) | -+ DDMA_CFG_DEST_ADDR_MODE(DDMA_ADDR_MODE_IO); -+ } else if (!vchan->is_dedicated && dir == DMA_MEM_TO_DEV) { -+ endpoints = NDMA_CFG_SRC_DRQ_TYPE(NDMA_DRQ_TYPE_SDRAM) | -+ NDMA_CFG_DEST_DRQ_TYPE(vchan->endpoint) | -+ NDMA_CFG_DEST_FIXED_ADDR; -+ } else if (vchan->is_dedicated) { -+ endpoints = DDMA_CFG_SRC_DRQ_TYPE(vchan->endpoint) | -+ DDMA_CFG_SRC_ADDR_MODE(DDMA_ADDR_MODE_IO) | -+ DDMA_CFG_DEST_DRQ_TYPE(DDMA_DRQ_TYPE_SDRAM) | -+ DDMA_CFG_DEST_ADDR_MODE(DDMA_ADDR_MODE_LINEAR); -+ } else { -+ endpoints = NDMA_CFG_SRC_DRQ_TYPE(vchan->endpoint) | -+ NDMA_CFG_SRC_FIXED_ADDR | -+ NDMA_CFG_DEST_DRQ_TYPE(NDMA_DRQ_TYPE_SDRAM); -+ } -+ -+ for_each_sg(sgl, sg, sg_len, i) { -+ /* Figure out addresses */ -+ if (dir == DMA_MEM_TO_DEV) { -+ srcaddr = sg_dma_address(sg); -+ dstaddr = sconfig->dst_addr; -+ } else { -+ srcaddr = sconfig->src_addr; -+ dstaddr = sg_dma_address(sg); -+ } -+ -+ /* -+ * These are the magic DMA engine timings that keep SPI going. -+ * I haven't seen any interface on DMAEngine to configure -+ * timings, and so far they seem to work for everything we -+ * support, so I've kept them here. I don't know if other -+ * devices need different timings because, as usual, we only -+ * have the "para" bitfield meanings, but no comment on what -+ * the values should be when doing a certain operation :| -+ */ -+ para = DDMA_MAGIC_SPI_PARAMETERS; -+ -+ /* And make a suitable promise */ -+ if (vchan->is_dedicated) -+ promise = generate_ddma_promise(chan, srcaddr, dstaddr, -+ sg_dma_len(sg), sconfig); -+ else -+ promise = generate_ndma_promise(chan, srcaddr, dstaddr, -+ sg_dma_len(sg), sconfig); -+ -+ if (!promise) -+ return NULL; /* TODO: should we free everything? */ -+ -+ promise->cfg |= endpoints; -+ promise->para = para; -+ -+ /* Then add it to the contract */ -+ list_add_tail(&promise->list, &contract->demands); -+ } -+ -+ /* -+ * Once we've got all the promises ready, add the contract -+ * to the pending list on the vchan -+ */ -+ return vchan_tx_prep(&vchan->vc, &contract->vd, flags); -+} -+ -+static int sun4i_dma_terminate_all(struct dma_chan *chan) -+{ -+ struct sun4i_dma_dev *priv = to_sun4i_dma_dev(chan->device); -+ struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan); -+ struct sun4i_dma_pchan *pchan = vchan->pchan; -+ LIST_HEAD(head); -+ unsigned long flags; -+ -+ spin_lock_irqsave(&vchan->vc.lock, flags); -+ vchan_get_all_descriptors(&vchan->vc, &head); -+ spin_unlock_irqrestore(&vchan->vc.lock, flags); -+ -+ /* -+ * Clearing the configuration register will halt the pchan. Interrupts -+ * may still trigger, so don't forget to disable them. -+ */ -+ if (pchan) { -+ if (pchan->is_dedicated) -+ writel(0, pchan->base + DDMA_CFG_REG); -+ else -+ writel(0, pchan->base + NDMA_CFG_REG); -+ set_pchan_interrupt(priv, pchan, 0, 0); -+ release_pchan(priv, pchan); -+ } -+ -+ spin_lock_irqsave(&vchan->vc.lock, flags); -+ vchan_dma_desc_free_list(&vchan->vc, &head); -+ /* Clear these so the vchan is usable again */ -+ vchan->processing = NULL; -+ vchan->pchan = NULL; -+ spin_unlock_irqrestore(&vchan->vc.lock, flags); -+ -+ return 0; -+} -+ -+static int sun4i_dma_config(struct dma_chan *chan, -+ struct dma_slave_config *config) -+{ -+ struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan); -+ -+ memcpy(&vchan->cfg, config, sizeof(*config)); -+ -+ return 0; -+} -+ -+static struct dma_chan *sun4i_dma_of_xlate(struct of_phandle_args *dma_spec, -+ struct of_dma *ofdma) -+{ -+ struct sun4i_dma_dev *priv = ofdma->of_dma_data; -+ struct sun4i_dma_vchan *vchan; -+ struct dma_chan *chan; -+ u8 is_dedicated = dma_spec->args[0]; -+ u8 endpoint = dma_spec->args[1]; -+ -+ /* Check if type is Normal or Dedicated */ -+ if (is_dedicated != 0 && is_dedicated != 1) -+ return NULL; -+ -+ /* Make sure the endpoint looks sane */ -+ if ((is_dedicated && endpoint >= DDMA_DRQ_TYPE_LIMIT) || -+ (!is_dedicated && endpoint >= NDMA_DRQ_TYPE_LIMIT)) -+ return NULL; -+ -+ chan = dma_get_any_slave_channel(&priv->slave); -+ if (!chan) -+ return NULL; -+ -+ /* Assign the endpoint to the vchan */ -+ vchan = to_sun4i_dma_vchan(chan); -+ vchan->is_dedicated = is_dedicated; -+ vchan->endpoint = endpoint; -+ -+ return chan; -+} -+ -+static enum dma_status sun4i_dma_tx_status(struct dma_chan *chan, -+ dma_cookie_t cookie, -+ struct dma_tx_state *state) -+{ -+ struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan); -+ struct sun4i_dma_pchan *pchan = vchan->pchan; -+ struct sun4i_dma_contract *contract; -+ struct sun4i_dma_promise *promise; -+ struct virt_dma_desc *vd; -+ unsigned long flags; -+ enum dma_status ret; -+ size_t bytes = 0; -+ -+ ret = dma_cookie_status(chan, cookie, state); -+ if (ret == DMA_COMPLETE) -+ return ret; -+ -+ spin_lock_irqsave(&vchan->vc.lock, flags); -+ vd = vchan_find_desc(&vchan->vc, cookie); -+ if (!vd) -+ goto exit; -+ contract = to_sun4i_dma_contract(vd); -+ -+ list_for_each_entry(promise, &contract->demands, list) -+ bytes += promise->len; -+ -+ /* -+ * The hardware is configured to return the remaining byte -+ * quantity. If possible, replace the first listed element's -+ * full size with the actual remaining amount -+ */ -+ promise = list_first_entry_or_null(&contract->demands, -+ struct sun4i_dma_promise, list); -+ if (promise && pchan) { -+ bytes -= promise->len; -+ if (pchan->is_dedicated) -+ bytes += readl(pchan->base + DDMA_BYTE_COUNT_REG); -+ else -+ bytes += readl(pchan->base + NDMA_BYTE_COUNT_REG); -+ } -+ -+exit: -+ -+ dma_set_residue(state, bytes); -+ spin_unlock_irqrestore(&vchan->vc.lock, flags); -+ -+ return ret; -+} -+ -+static void sun4i_dma_issue_pending(struct dma_chan *chan) -+{ -+ struct sun4i_dma_dev *priv = to_sun4i_dma_dev(chan->device); -+ struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan); -+ unsigned long flags; -+ -+ spin_lock_irqsave(&vchan->vc.lock, flags); -+ -+ /* -+ * If there are pending transactions for this vchan, push one of -+ * them into the engine to get the ball rolling. -+ */ -+ if (vchan_issue_pending(&vchan->vc)) -+ __execute_vchan_pending(priv, vchan); -+ -+ spin_unlock_irqrestore(&vchan->vc.lock, flags); -+} -+ -+static irqreturn_t sun4i_dma_interrupt(int irq, void *dev_id) -+{ -+ struct sun4i_dma_dev *priv = dev_id; -+ struct sun4i_dma_pchan *pchans = priv->pchans, *pchan; -+ struct sun4i_dma_vchan *vchan; -+ struct sun4i_dma_contract *contract; -+ struct sun4i_dma_promise *promise; -+ unsigned long pendirq, irqs, disableirqs; -+ int bit, i, free_room, allow_mitigation = 1; -+ -+ pendirq = readl_relaxed(priv->base + DMA_IRQ_PENDING_STATUS_REG); -+ -+handle_pending: -+ -+ disableirqs = 0; -+ free_room = 0; -+ -+ for_each_set_bit(bit, &pendirq, 32) { -+ pchan = &pchans[bit >> 1]; -+ vchan = pchan->vchan; -+ if (!vchan) /* a terminated channel may still interrupt */ -+ continue; -+ contract = vchan->contract; -+ -+ /* -+ * Disable the IRQ and free the pchan if it's an end -+ * interrupt (odd bit) -+ */ -+ if (bit & 1) { -+ spin_lock(&vchan->vc.lock); -+ -+ /* -+ * Move the promise into the completed list now that -+ * we're done with it -+ */ -+ list_del(&vchan->processing->list); -+ list_add_tail(&vchan->processing->list, -+ &contract->completed_demands); -+ -+ /* -+ * Cyclic DMA transfers are special: -+ * - There's always something we can dispatch -+ * - We need to run the callback -+ * - Latency is very important, as this is used by audio -+ * We therefore just cycle through the list and dispatch -+ * whatever we have here, reusing the pchan. There's -+ * no need to run the thread after this. -+ * -+ * For non-cyclic transfers we need to look around, -+ * so we can program some more work, or notify the -+ * client that their transfers have been completed. -+ */ -+ if (contract->is_cyclic) { -+ promise = get_next_cyclic_promise(contract); -+ vchan->processing = promise; -+ configure_pchan(pchan, promise); -+ vchan_cyclic_callback(&contract->vd); -+ } else { -+ vchan->processing = NULL; -+ vchan->pchan = NULL; -+ -+ free_room = 1; -+ disableirqs |= BIT(bit); -+ release_pchan(priv, pchan); -+ } -+ -+ spin_unlock(&vchan->vc.lock); -+ } else { -+ /* Half done interrupt */ -+ if (contract->is_cyclic) -+ vchan_cyclic_callback(&contract->vd); -+ else -+ disableirqs |= BIT(bit); -+ } -+ } -+ -+ /* Disable the IRQs for events we handled */ -+ spin_lock(&priv->lock); -+ irqs = readl_relaxed(priv->base + DMA_IRQ_ENABLE_REG); -+ writel_relaxed(irqs & ~disableirqs, priv->base + DMA_IRQ_ENABLE_REG); -+ spin_unlock(&priv->lock); -+ -+ /* Writing 1 to the pending field will clear the pending interrupt */ -+ writel_relaxed(pendirq, priv->base + DMA_IRQ_PENDING_STATUS_REG); -+ -+ /* -+ * If a pchan was freed, we may be able to schedule something else, -+ * so have a look around -+ */ -+ if (free_room) { -+ for (i = 0; i < DMA_NR_MAX_VCHANS; i++) { -+ vchan = &priv->vchans[i]; -+ spin_lock(&vchan->vc.lock); -+ __execute_vchan_pending(priv, vchan); -+ spin_unlock(&vchan->vc.lock); -+ } -+ } -+ -+ /* -+ * Handle newer interrupts if some showed up, but only do it once -+ * to avoid a too long a loop -+ */ -+ if (allow_mitigation) { -+ pendirq = readl_relaxed(priv->base + DMA_IRQ_PENDING_STATUS_REG); -+ if (pendirq) { -+ allow_mitigation = 0; -+ goto handle_pending; -+ } -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+static int sun4i_dma_probe(struct platform_device *pdev) -+{ -+ struct sun4i_dma_dev *priv; -+ struct resource *res; -+ int i, j, ret; -+ -+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ priv->base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(priv->base)) -+ return PTR_ERR(priv->base); -+ -+ priv->irq = platform_get_irq(pdev, 0); -+ if (priv->irq < 0) { -+ dev_err(&pdev->dev, "Cannot claim IRQ\n"); -+ return priv->irq; -+ } -+ -+ priv->clk = devm_clk_get(&pdev->dev, NULL); -+ if (IS_ERR(priv->clk)) { -+ dev_err(&pdev->dev, "No clock specified\n"); -+ return PTR_ERR(priv->clk); -+ } -+ -+ platform_set_drvdata(pdev, priv); -+ spin_lock_init(&priv->lock); -+ -+ dma_cap_zero(priv->slave.cap_mask); -+ dma_cap_set(DMA_PRIVATE, priv->slave.cap_mask); -+ dma_cap_set(DMA_MEMCPY, priv->slave.cap_mask); -+ dma_cap_set(DMA_CYCLIC, priv->slave.cap_mask); -+ dma_cap_set(DMA_SLAVE, priv->slave.cap_mask); -+ -+ INIT_LIST_HEAD(&priv->slave.channels); -+ priv->slave.device_free_chan_resources = sun4i_dma_free_chan_resources; -+ priv->slave.device_tx_status = sun4i_dma_tx_status; -+ priv->slave.device_issue_pending = sun4i_dma_issue_pending; -+ priv->slave.device_prep_slave_sg = sun4i_dma_prep_slave_sg; -+ priv->slave.device_prep_dma_memcpy = sun4i_dma_prep_dma_memcpy; -+ priv->slave.device_prep_dma_cyclic = sun4i_dma_prep_dma_cyclic; -+ priv->slave.device_config = sun4i_dma_config; -+ priv->slave.device_terminate_all = sun4i_dma_terminate_all; -+ priv->slave.copy_align = DMA_SLAVE_BUSWIDTH_4_BYTES; -+ priv->slave.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | -+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | -+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); -+ priv->slave.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | -+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | -+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); -+ priv->slave.directions = BIT(DMA_DEV_TO_MEM) | -+ BIT(DMA_MEM_TO_DEV); -+ priv->slave.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; -+ -+ priv->slave.dev = &pdev->dev; -+ -+ priv->pchans = devm_kcalloc(&pdev->dev, DMA_NR_MAX_CHANNELS, -+ sizeof(struct sun4i_dma_pchan), GFP_KERNEL); -+ priv->vchans = devm_kcalloc(&pdev->dev, DMA_NR_MAX_VCHANS, -+ sizeof(struct sun4i_dma_vchan), GFP_KERNEL); -+ if (!priv->vchans || !priv->pchans) -+ return -ENOMEM; -+ -+ /* -+ * [0..NDMA_NR_MAX_CHANNELS) are normal pchans, and -+ * [NDMA_NR_MAX_CHANNELS..DMA_NR_MAX_CHANNELS) are dedicated ones -+ */ -+ for (i = 0; i < NDMA_NR_MAX_CHANNELS; i++) -+ priv->pchans[i].base = priv->base + NDMA_CHANNEL_REG_BASE(i); -+ -+ for (j = 0; i < DMA_NR_MAX_CHANNELS; i++, j++) { -+ priv->pchans[i].base = priv->base + DDMA_CHANNEL_REG_BASE(j); -+ priv->pchans[i].is_dedicated = 1; -+ } -+ -+ for (i = 0; i < DMA_NR_MAX_VCHANS; i++) { -+ struct sun4i_dma_vchan *vchan = &priv->vchans[i]; -+ -+ spin_lock_init(&vchan->vc.lock); -+ vchan->vc.desc_free = sun4i_dma_free_contract; -+ vchan_init(&vchan->vc, &priv->slave); -+ } -+ -+ ret = clk_prepare_enable(priv->clk); -+ if (ret) { -+ dev_err(&pdev->dev, "Couldn't enable the clock\n"); -+ return ret; -+ } -+ -+ /* -+ * Make sure the IRQs are all disabled and accounted for. The bootloader -+ * likes to leave these dirty -+ */ -+ writel(0, priv->base + DMA_IRQ_ENABLE_REG); -+ writel(0xFFFFFFFF, priv->base + DMA_IRQ_PENDING_STATUS_REG); -+ -+ ret = devm_request_irq(&pdev->dev, priv->irq, sun4i_dma_interrupt, -+ 0, dev_name(&pdev->dev), priv); -+ if (ret) { -+ dev_err(&pdev->dev, "Cannot request IRQ\n"); -+ goto err_clk_disable; -+ } -+ -+ ret = dma_async_device_register(&priv->slave); -+ if (ret) { -+ dev_warn(&pdev->dev, "Failed to register DMA engine device\n"); -+ goto err_clk_disable; -+ } -+ -+ ret = of_dma_controller_register(pdev->dev.of_node, sun4i_dma_of_xlate, -+ priv); -+ if (ret) { -+ dev_err(&pdev->dev, "of_dma_controller_register failed\n"); -+ goto err_dma_unregister; -+ } -+ -+ dev_dbg(&pdev->dev, "Successfully probed SUN4I_DMA\n"); -+ -+ return 0; -+ -+err_dma_unregister: -+ dma_async_device_unregister(&priv->slave); -+err_clk_disable: -+ clk_disable_unprepare(priv->clk); -+ return ret; -+} -+ -+static int sun4i_dma_remove(struct platform_device *pdev) -+{ -+ struct sun4i_dma_dev *priv = platform_get_drvdata(pdev); -+ -+ /* Disable IRQ so no more work is scheduled */ -+ disable_irq(priv->irq); -+ -+ of_dma_controller_free(pdev->dev.of_node); -+ dma_async_device_unregister(&priv->slave); -+ -+ clk_disable_unprepare(priv->clk); -+ -+ return 0; -+} -+ -+static struct of_device_id sun4i_dma_match[] = { -+ { .compatible = "allwinner,sun4i-a10-dma" }, -+ { /* sentinel */ }, -+}; -+ -+static struct platform_driver sun4i_dma_driver = { -+ .probe = sun4i_dma_probe, -+ .remove = sun4i_dma_remove, -+ .driver = { -+ .name = "sun4i-dma", -+ .of_match_table = sun4i_dma_match, -+ }, -+}; -+ -+module_platform_driver(sun4i_dma_driver); -+ -+MODULE_DESCRIPTION("Allwinner A10 Dedicated DMA Controller Driver"); -+MODULE_AUTHOR("Emilio López <emilio@elopez.com.ar>"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/sunxi/patches-4.1/161-clk-sunxi-add-pll2-for-sun457i.patch b/target/linux/sunxi/patches-4.1/161-clk-sunxi-add-pll2-for-sun457i.patch deleted file mode 100644 index f4b1b5c..0000000 --- a/target/linux/sunxi/patches-4.1/161-clk-sunxi-add-pll2-for-sun457i.patch +++ /dev/null @@ -1,282 +0,0 @@ -From ea6871c5b3a934d0bfe08082e95c3b952f93ef39 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar> -Date: Fri, 18 Jul 2014 15:48:35 -0300 -Subject: [PATCH] clk: sunxi: PLL2 support for sun4i, sun5i and sun7i -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This patch adds support for PLL2 and derivates on A10 revision B and -higher, as well as on sun5i and sun7i SoCs. As this PLL is only used for -audio and requires good accuracy, we only support two known good rates. - -Signed-off-by: Emilio López <emilio@elopez.com.ar> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - drivers/clk/sunxi/Makefile | 1 + - drivers/clk/sunxi/clk-a10-pll2.c | 249 +++++++++++++++++++++++++++++++++++++++ - 2 files changed, 250 insertions(+) - create mode 100644 drivers/clk/sunxi/clk-a10-pll2.c - ---- a/drivers/clk/sunxi/Makefile -+++ b/drivers/clk/sunxi/Makefile -@@ -4,6 +4,7 @@ - - obj-y += clk-sunxi.o clk-factors.o - obj-y += clk-a10-hosc.o -+obj-y += clk-a10-pll2.o - obj-y += clk-a20-gmac.o - obj-y += clk-mod0.o - obj-y += clk-sun8i-mbus.o ---- /dev/null -+++ b/drivers/clk/sunxi/clk-a10-pll2.c -@@ -0,0 +1,249 @@ -+/* -+ * Copyright 2013 Emilio López -+ * -+ * Emilio López <emilio@elopez.com.ar> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include <linux/clk-provider.h> -+#include <linux/of.h> -+#include <linux/of_address.h> -+#include <linux/slab.h> -+ -+#define SUN4I_PLL2_ENABLE 31 -+#define SUN4I_PLL2_POST_DIV 26 -+#define SUN4I_PLL2_POST_DIV_MASK 0xF -+#define SUN4I_PLL2_N 8 -+#define SUN4I_PLL2_N_MASK 0x7F -+#define SUN4I_PLL2_PRE_DIV 0 -+#define SUN4I_PLL2_PRE_DIV_MASK 0x1F -+ -+#define SUN4I_PLL2_OUTPUTS 4 -+ -+struct sun4i_pll2_clk { -+ struct clk_hw hw; -+ void __iomem *reg; -+}; -+ -+static inline struct sun4i_pll2_clk *to_sun4i_pll2_clk(struct clk_hw *hw) -+{ -+ return container_of(hw, struct sun4i_pll2_clk, hw); -+} -+ -+static unsigned long sun4i_pll2_1x_recalc_rate(struct clk_hw *hw, -+ unsigned long parent_rate) -+{ -+ struct sun4i_pll2_clk *clk = to_sun4i_pll2_clk(hw); -+ int n, prediv, postdiv; -+ -+ u32 val = readl(clk->reg); -+ n = (val >> SUN4I_PLL2_N) & SUN4I_PLL2_N_MASK; -+ prediv = (val >> SUN4I_PLL2_PRE_DIV) & SUN4I_PLL2_PRE_DIV_MASK; -+ postdiv = (val >> SUN4I_PLL2_POST_DIV) & SUN4I_PLL2_POST_DIV_MASK; -+ -+ /* 0 is a special case and means 1 */ -+ if (n == 0) -+ n = 1; -+ if (prediv == 0) -+ prediv = 1; -+ if (postdiv == 0) -+ postdiv = 1; -+ -+ return ((parent_rate * n) / prediv) / postdiv; -+} -+ -+static unsigned long sun4i_pll2_8x_recalc_rate(struct clk_hw *hw, -+ unsigned long parent_rate) -+{ -+ struct sun4i_pll2_clk *clk = to_sun4i_pll2_clk(hw); -+ int n, prediv; -+ -+ u32 val = readl(clk->reg); -+ n = (val >> SUN4I_PLL2_N) & SUN4I_PLL2_N_MASK; -+ prediv = (val >> SUN4I_PLL2_PRE_DIV) & SUN4I_PLL2_PRE_DIV_MASK; -+ -+ /* 0 is a special case and means 1 */ -+ if (n == 0) -+ n = 1; -+ if (prediv == 0) -+ prediv = 1; -+ -+ return ((parent_rate * 2 * n) / prediv); -+} -+ -+static unsigned long sun4i_pll2_4x_recalc_rate(struct clk_hw *hw, -+ unsigned long parent_rate) -+{ -+ return sun4i_pll2_8x_recalc_rate(hw, parent_rate / 2); -+} -+ -+static unsigned long sun4i_pll2_2x_recalc_rate(struct clk_hw *hw, -+ unsigned long parent_rate) -+{ -+ return sun4i_pll2_8x_recalc_rate(hw, parent_rate / 4); -+} -+ -+static long sun4i_pll2_1x_round_rate(struct clk_hw *hw, unsigned long rate, -+ unsigned long *parent_rate) -+{ -+ /* -+ * There is only two interesting rates for the audio PLL, the -+ * rest isn't really usable due to accuracy concerns. Therefore, -+ * we specifically round to those rates here -+ */ -+ if (rate < 22579200) -+ return -EINVAL; -+ -+ if (rate >= 22579200 && rate < 24576000) -+ return 22579200; -+ -+ return 24576000; -+} -+ -+static long sun4i_pll2_8x_round_rate(struct clk_hw *hw, unsigned long rate, -+ unsigned long *parent_rate) -+{ -+ /* -+ * We should account for the postdiv that we're undoing on PLL2x8, -+ * which is always 4 in the usable configurations. The division -+ * by two is done because PLL2x8 also doubles the rate -+ */ -+ *parent_rate = (rate * 4) / 2; -+ -+ return rate; -+} -+ -+static long sun4i_pll2_4x_round_rate(struct clk_hw *hw, unsigned long rate, -+ unsigned long *parent_rate) -+{ -+ /* PLL2x4 * 2 = PLL2x8 */ -+ return sun4i_pll2_8x_round_rate(hw, rate * 2, parent_rate); -+} -+ -+static long sun4i_pll2_2x_round_rate(struct clk_hw *hw, unsigned long rate, -+ unsigned long *parent_rate) -+{ -+ /* PLL2x2 * 4 = PLL2x8 */ -+ return sun4i_pll2_8x_round_rate(hw, rate * 4, parent_rate); -+} -+ -+static int sun4i_pll2_set_rate(struct clk_hw *hw, unsigned long rate, -+ unsigned long parent_rate) -+{ -+ struct sun4i_pll2_clk *clk = to_sun4i_pll2_clk(hw); -+ u32 val = readl(clk->reg); -+ -+ val &= ~(SUN4I_PLL2_N_MASK << SUN4I_PLL2_N); -+ val &= ~(SUN4I_PLL2_PRE_DIV_MASK << SUN4I_PLL2_PRE_DIV); -+ val &= ~(SUN4I_PLL2_POST_DIV_MASK << SUN4I_PLL2_POST_DIV); -+ -+ val |= (21 << SUN4I_PLL2_PRE_DIV) | (4 << SUN4I_PLL2_POST_DIV); -+ -+ if (rate == 22579200) -+ val |= (79 << SUN4I_PLL2_N); -+ else if (rate == 24576000) -+ val |= (86 << SUN4I_PLL2_N); -+ else -+ return -EINVAL; -+ -+ writel(val, clk->reg); -+ -+ return 0; -+} -+ -+static struct clk_ops sun4i_pll2_ops_1x = { -+ .recalc_rate = sun4i_pll2_1x_recalc_rate, -+ .round_rate = sun4i_pll2_1x_round_rate, -+ .set_rate = sun4i_pll2_set_rate, -+}; -+ -+static struct clk_ops sun4i_pll2_ops_2x = { -+ .recalc_rate = sun4i_pll2_2x_recalc_rate, -+ .round_rate = sun4i_pll2_2x_round_rate, -+}; -+ -+static struct clk_ops sun4i_pll2_ops_4x = { -+ .recalc_rate = sun4i_pll2_4x_recalc_rate, -+ .round_rate = sun4i_pll2_4x_round_rate, -+}; -+ -+static struct clk_ops sun4i_pll2_ops_8x = { -+ .recalc_rate = sun4i_pll2_8x_recalc_rate, -+ .round_rate = sun4i_pll2_8x_round_rate, -+}; -+ -+static void __init sun4i_pll2_setup(struct device_node *np) -+{ -+ const char *clk_name = np->name, *parent; -+ struct clk_onecell_data *clk_data; -+ struct sun4i_pll2_clk *pll2; -+ struct clk_gate *gate; -+ struct clk **clks; -+ void __iomem *reg; -+ -+ pll2 = kzalloc(sizeof(*pll2), GFP_KERNEL); -+ gate = kzalloc(sizeof(*gate), GFP_KERNEL); -+ clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL); -+ clks = kcalloc(SUN4I_PLL2_OUTPUTS, sizeof(struct clk *), GFP_KERNEL); -+ if (!pll2 || !gate || !clk_data || !clks) -+ goto free_mem; -+ -+ reg = of_iomap(np, 0); -+ parent = of_clk_get_parent_name(np, 0); -+ of_property_read_string_index(np, "clock-output-names", 0, &clk_name); -+ -+ pll2->reg = reg; -+ gate->reg = reg; -+ gate->bit_idx = SUN4I_PLL2_ENABLE; -+ -+ /* PLL2, also known as PLL2x1 */ -+ of_property_read_string_index(np, "clock-output-names", 0, &clk_name); -+ clks[0] = clk_register_composite(NULL, clk_name, &parent, 1, NULL, NULL, -+ &pll2->hw, &sun4i_pll2_ops_1x, -+ &gate->hw, &clk_gate_ops, 0); -+ WARN_ON(IS_ERR(clks[0])); -+ parent = clk_name; -+ -+ /* PLL2x2, 1/4 the rate of PLL2x8 */ -+ of_property_read_string_index(np, "clock-output-names", 1, &clk_name); -+ clks[1] = clk_register_composite(NULL, clk_name, &parent, 1, NULL, NULL, -+ &pll2->hw, &sun4i_pll2_ops_2x, -+ NULL, NULL, CLK_SET_RATE_PARENT); -+ WARN_ON(IS_ERR(clks[1])); -+ -+ /* PLL2x4, 1/2 the rate of PLL2x8 */ -+ of_property_read_string_index(np, "clock-output-names", 2, &clk_name); -+ clks[2] = clk_register_composite(NULL, clk_name, &parent, 1, NULL, NULL, -+ &pll2->hw, &sun4i_pll2_ops_4x, -+ NULL, NULL, CLK_SET_RATE_PARENT); -+ WARN_ON(IS_ERR(clks[2])); -+ -+ /* PLL2x8, double of PLL2 without the post divisor */ -+ of_property_read_string_index(np, "clock-output-names", 3, &clk_name); -+ clks[3] = clk_register_composite(NULL, clk_name, &parent, 1, NULL, NULL, -+ &pll2->hw, &sun4i_pll2_ops_8x, -+ NULL, NULL, CLK_SET_RATE_PARENT); -+ WARN_ON(IS_ERR(clks[3])); -+ -+ clk_data->clks = clks; -+ clk_data->clk_num = SUN4I_PLL2_OUTPUTS; -+ of_clk_add_provider(np, of_clk_src_onecell_get, clk_data); -+ -+ return; -+ -+free_mem: -+ kfree(pll2); -+ kfree(gate); -+ kfree(clk_data); -+ kfree(clks); -+} -+CLK_OF_DECLARE(sun4i_pll2, "allwinner,sun4i-a10-b-pll2-clk", sun4i_pll2_setup); diff --git a/target/linux/sunxi/patches-4.1/162-clk-sunxi-codec-clock.patch b/target/linux/sunxi/patches-4.1/162-clk-sunxi-codec-clock.patch deleted file mode 100644 index c19d7a6..0000000 --- a/target/linux/sunxi/patches-4.1/162-clk-sunxi-codec-clock.patch +++ /dev/null @@ -1,73 +0,0 @@ -From 9b95732096c11d84bd0082aed0d575d8c09e3ab6 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar> -Date: Fri, 18 Jul 2014 15:49:37 -0300 -Subject: [PATCH] clk: sunxi: codec clock support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The codec clock on sun4i, sun5i and sun7i is a simple gate with PLL2 as -parent. - -Signed-off-by: Emilio López <emilio@elopez.com.ar> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - drivers/clk/sunxi/Makefile | 1 + - drivers/clk/sunxi/clk-a10-codec.c | 41 +++++++++++++++++++++++++++++++++++++++ - 2 files changed, 42 insertions(+) - create mode 100644 drivers/clk/sunxi/clk-a10-codec.c - ---- a/drivers/clk/sunxi/Makefile -+++ b/drivers/clk/sunxi/Makefile -@@ -3,6 +3,7 @@ - # - - obj-y += clk-sunxi.o clk-factors.o -+obj-y += clk-a10-codec.o - obj-y += clk-a10-hosc.o - obj-y += clk-a10-pll2.o - obj-y += clk-a20-gmac.o ---- /dev/null -+++ b/drivers/clk/sunxi/clk-a10-codec.c -@@ -0,0 +1,41 @@ -+/* -+ * Copyright 2013 Emilio López -+ * -+ * Emilio López <emilio@elopez.com.ar> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include <linux/clk-provider.h> -+#include <linux/clkdev.h> -+#include <linux/of.h> -+#include <linux/of_address.h> -+ -+#define SUN4I_CODEC_GATE 31 -+ -+static void __init sun4i_codec_clk_setup(struct device_node *node) -+{ -+ struct clk *clk; -+ const char *clk_name = node->name, *parent_name; -+ void __iomem *reg; -+ -+ of_property_read_string(node, "clock-output-names", &clk_name); -+ parent_name = of_clk_get_parent_name(node, 0); -+ reg = of_iomap(node, 0); -+ -+ clk = clk_register_gate(NULL, clk_name, parent_name, -+ CLK_SET_RATE_PARENT, reg, -+ SUN4I_CODEC_GATE, 0, NULL); -+ -+ if (!IS_ERR(clk)) -+ of_clk_add_provider(node, of_clk_src_simple_get, clk); -+} -+CLK_OF_DECLARE(sun4i_codec, "allwinner,sun4i-a10-codec-clk", sun4i_codec_clk_setup); diff --git a/target/linux/sunxi/patches-4.1/163-clk-sunxi-mod1-clock.patch b/target/linux/sunxi/patches-4.1/163-clk-sunxi-mod1-clock.patch deleted file mode 100644 index a638784..0000000 --- a/target/linux/sunxi/patches-4.1/163-clk-sunxi-mod1-clock.patch +++ /dev/null @@ -1,102 +0,0 @@ -From 7fbbca069587b7f467e76f583ad640977de1a4ff Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar> -Date: Fri, 18 Jul 2014 15:28:02 -0300 -Subject: [PATCH] clk: sunxi: mod1 clock support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The module 1 type of clocks consist of a gate and a mux and are used on -the audio blocks to mux and gate the PLL2 outputs for AC97, IIS or -SPDIF. This commit adds support for them on the sunxi clock driver. - -Signed-off-by: Emilio López <emilio@elopez.com.ar> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - drivers/clk/sunxi/Makefile | 1 + - drivers/clk/sunxi/clk-a10-mod1.c | 69 ++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 70 insertions(+) - create mode 100644 drivers/clk/sunxi/clk-a10-mod1.c - ---- a/drivers/clk/sunxi/Makefile -+++ b/drivers/clk/sunxi/Makefile -@@ -5,6 +5,7 @@ - obj-y += clk-sunxi.o clk-factors.o - obj-y += clk-a10-codec.o - obj-y += clk-a10-hosc.o -+obj-y += clk-a10-mod1.o - obj-y += clk-a10-pll2.o - obj-y += clk-a20-gmac.o - obj-y += clk-mod0.o ---- /dev/null -+++ b/drivers/clk/sunxi/clk-a10-mod1.c -@@ -0,0 +1,69 @@ -+/* -+ * Copyright 2013 Emilio López -+ * -+ * Emilio López <emilio@elopez.com.ar> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include <linux/clk-provider.h> -+#include <linux/clkdev.h> -+#include <linux/of.h> -+#include <linux/of_address.h> -+ -+static DEFINE_SPINLOCK(mod1_lock); -+ -+#define SUN4I_MOD1_ENABLE 31 -+#define SUN4I_MOD1_MUX 16 -+#define SUN4I_MOD1_MUX_WIDTH 2 -+#define SUN4I_MOD1_MAX_PARENTS 4 -+ -+static void __init sun4i_mod1_clk_setup(struct device_node *node) -+{ -+ struct clk *clk; -+ struct clk_mux *mux; -+ struct clk_gate *gate; -+ const char *parents[4]; -+ const char *clk_name = node->name; -+ void __iomem *reg; -+ int i = 0; -+ -+ mux = kzalloc(sizeof(*mux), GFP_KERNEL); -+ gate = kzalloc(sizeof(*gate), GFP_KERNEL); -+ if (!mux || !gate) { -+ kfree(mux); -+ kfree(gate); -+ return; -+ } -+ -+ of_property_read_string(node, "clock-output-names", &clk_name); -+ reg = of_iomap(node, 0); -+ -+ while (i < SUN4I_MOD1_MAX_PARENTS && -+ (parents[i] = of_clk_get_parent_name(node, i)) != NULL) -+ i++; -+ -+ gate->reg = reg; -+ gate->bit_idx = SUN4I_MOD1_ENABLE; -+ gate->lock = &mod1_lock; -+ mux->reg = reg; -+ mux->shift = SUN4I_MOD1_MUX; -+ mux->mask = BIT(SUN4I_MOD1_MUX_WIDTH) - 1; -+ mux->lock = &mod1_lock; -+ -+ clk = clk_register_composite(NULL, clk_name, parents, i, -+ &mux->hw, &clk_mux_ops, -+ NULL, NULL, -+ &gate->hw, &clk_gate_ops, 0); -+ if (!IS_ERR(clk)) -+ of_clk_add_provider(node, of_clk_src_simple_get, clk); -+} -+CLK_OF_DECLARE(sun4i_mod1, "allwinner,sun4i-a10-mod1-clk", sun4i_mod1_clk_setup); diff --git a/target/linux/sunxi/patches-4.1/164-1-dt-add-pll2-into-dtsi.patch b/target/linux/sunxi/patches-4.1/164-1-dt-add-pll2-into-dtsi.patch deleted file mode 100644 index f7ddfa1..0000000 --- a/target/linux/sunxi/patches-4.1/164-1-dt-add-pll2-into-dtsi.patch +++ /dev/null @@ -1,70 +0,0 @@ -From 32bb743195e1e48c48fc5cefd7c6ecdce56046a3 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar> -Date: Fri, 18 Jul 2014 15:58:44 -0300 -Subject: [PATCH] ARM: sunxi: Add PLL2 support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit adds the PLL2 definition to the sun4i, sun5i and sun7i -device trees. PLL2 is used to clock audio devices. - -Signed-off-by: Emilio López <emilio@elopez.com.ar> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++ - arch/arm/boot/dts/sun5i.dtsi | 8 ++++++++ - arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++ - 3 files changed, 24 insertions(+) - ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -162,6 +162,14 @@ - clock-output-names = "pll1"; - }; - -+ pll2: clk@01c20008 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun4i-a10-b-pll2-clk"; -+ reg = <0x01c20008 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll2", "pll2x2", "pll2x4", "pll2x8"; -+ }; -+ - pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -136,6 +136,14 @@ - clock-output-names = "pll1"; - }; - -+ pll2: clk@01c20008 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun4i-a10-b-pll2-clk"; -+ reg = <0x01c20008 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll2", "pll2x2", "pll2x4", "pll2x8"; -+ }; -+ - pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -203,6 +203,14 @@ - clock-output-names = "pll1"; - }; - -+ pll2: clk@01c20008 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun4i-a10-b-pll2-clk"; -+ reg = <0x01c20008 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll2", "pll2x2", "pll2x4", "pll2x8"; -+ }; -+ - pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun7i-a20-pll4-clk"; diff --git a/target/linux/sunxi/patches-4.1/164-2-dt-add-codec-clock-into-dtsi.patch b/target/linux/sunxi/patches-4.1/164-2-dt-add-codec-clock-into-dtsi.patch deleted file mode 100644 index d80eae7..0000000 --- a/target/linux/sunxi/patches-4.1/164-2-dt-add-codec-clock-into-dtsi.patch +++ /dev/null @@ -1,70 +0,0 @@ -From b404f3daca1807a74e07180397c6e85046b7a5cd Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar> -Date: Fri, 18 Jul 2014 15:58:58 -0300 -Subject: [PATCH] ARM: sunxi: Add codec clock support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit adds the codec clock definition to the sun4i, sun5i and -sun7i device trees. The codec clock is used in the analog codec block. - -Signed-off-by: Emilio López <emilio@elopez.com.ar> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++ - arch/arm/boot/dts/sun5i.dtsi | 8 ++++++++ - arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++ - 3 files changed, 24 insertions(+) - ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -420,6 +420,14 @@ - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi3"; - }; -+ -+ codec_clk: clk@01c20140 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-a10-codec-clk"; -+ reg = <0x01c20140 0x4>; -+ clocks = <&pll2 0>; -+ clock-output-names = "codec"; -+ }; - }; - - soc@01c00000 { ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -350,6 +350,14 @@ - clock-output-names = "usb_ohci0", "usb_phy"; - }; - -+ codec_clk: clk@01c20140 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-a10-codec-clk"; -+ reg = <0x01c20140 0x4>; -+ clocks = <&pll2 0>; -+ clock-output-names = "codec"; -+ }; -+ - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-mbus-clk"; ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -464,6 +464,14 @@ - clock-output-names = "spi3"; - }; - -+ codec_clk: clk@01c20140 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-a10-codec-clk"; -+ reg = <0x01c20140 0x4>; -+ clocks = <&pll2 0>; -+ clock-output-names = "codec"; -+ }; -+ - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-mbus-clk"; diff --git a/target/linux/sunxi/patches-4.1/164-3-dt-sun7i-add-mod1-clocknodes.patch b/target/linux/sunxi/patches-4.1/164-3-dt-sun7i-add-mod1-clocknodes.patch deleted file mode 100644 index 38f7856..0000000 --- a/target/linux/sunxi/patches-4.1/164-3-dt-sun7i-add-mod1-clocknodes.patch +++ /dev/null @@ -1,72 +0,0 @@ -From e9051f5dbc26e78f91cf23ca79ae4c8471119667 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar> -Date: Fri, 18 Jul 2014 15:26:08 -0300 -Subject: [PATCH] ARM: sun7i: Add mod1 clock nodes -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit adds all the mod1 clocks available on A20 to its device -tree. This list was created by looking at the A20 user manual. - -Not-signed-off-by: Emilio López <emilio@elopez.com.ar> -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 39 +++++++++++++++++++++++++++++++++++++++ - 1 file changed, 39 insertions(+) - ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -447,6 +447,29 @@ - clock-output-names = "ir1"; - }; - -+ iis0_clk: clk@01c200b8 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-a10-mod1-clk"; -+ reg = <0x01c200b8 0x4>; -+ clocks = <&pll2 0>, <&pll2 1>, <&pll2 2>, <&pll2 3>; -+ clock-output-names = "iis0"; -+ }; -+ -+ ac97_clk: clk@01c200bc { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-a10-mod1-clk"; -+ reg = <0x01c200bc 0x4>; -+ clocks = <&pll2 3>, <&pll2 2>, <&pll2 1>, <&pll2 0>; -+ clock-output-names = "ac97"; -+ }; -+ -+ spdif_clk: clk@01c200c0 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-a10-mod1-clk"; -+ reg = <0x01c200c0 0x4>; -+ clocks = <&pll2 0>, <&pll2 1>, <&pll2 2>, <&pll2 3>; -+ clock-output-names = "spdif"; -+ }; - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; -@@ -464,6 +487,22 @@ - clock-output-names = "spi3"; - }; - -+ iis1_clk: clk@01c200d8 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-a10-mod1-clk"; -+ reg = <0x01c200d8 0x4>; -+ clocks = <&pll2 0>, <&pll2 1>, <&pll2 2>, <&pll2 3>; -+ clock-output-names = "iis1"; -+ }; -+ -+ iis2_clk: clk@01c200dc { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-a10-mod1-clk"; -+ reg = <0x01c200dc 0x4>; -+ clocks = <&pll2 0>, <&pll2 1>, <&pll2 2>, <&pll2 3>; -+ clock-output-names = "iis2"; -+ }; -+ - codec_clk: clk@01c20140 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-codec-clk"; diff --git a/target/linux/sunxi/patches-4.1/164-4-dt-sun7i-resort-pll-parents-for-audio.patch b/target/linux/sunxi/patches-4.1/164-4-dt-sun7i-resort-pll-parents-for-audio.patch deleted file mode 100644 index 79a93f5..0000000 --- a/target/linux/sunxi/patches-4.1/164-4-dt-sun7i-resort-pll-parents-for-audio.patch +++ /dev/null @@ -1,21 +0,0 @@ -From ed5c1e047de4e8a849cd0517590d5c1bbf3247fc Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <elopez93@gmail.com> -Date: Sun, 17 Aug 2014 19:25:53 -0300 -Subject: [PATCH] resort pll parents for audio - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -467,7 +467,7 @@ - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200c0 0x4>; -- clocks = <&pll2 0>, <&pll2 1>, <&pll2 2>, <&pll2 3>; -+ clocks = <&pll2 3>, <&pll2 2>, <&pll2 1>, <&pll2 0>; - clock-output-names = "spdif"; - }; - usb_clk: clk@01c200cc { diff --git a/target/linux/sunxi/patches-4.1/165-asoc-add-sunxi-codec.patch b/target/linux/sunxi/patches-4.1/165-asoc-add-sunxi-codec.patch deleted file mode 100644 index b73884f..0000000 --- a/target/linux/sunxi/patches-4.1/165-asoc-add-sunxi-codec.patch +++ /dev/null @@ -1,865 +0,0 @@ -From 97dcb50623db12f13c9c9a8b68dca61901b7f030 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar> -Date: Mon, 14 Jul 2014 20:25:23 -0300 -Subject: [PATCH] ASoC: sunxi: add support for the on-chip codec on early - Allwinner SoCs - -The sun4i, sun5i and sun7i SoC families have a built-in codec, capable -of both audio capture and playback. This memory-mapped device can be fed -with audio data via the Allwinner DMA controller. - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - sound/soc/Kconfig | 1 + - sound/soc/Makefile | 1 + - sound/soc/sunxi/Kconfig | 10 + - sound/soc/sunxi/Makefile | 2 + - sound/soc/sunxi/sunxi-codec.c | 802 ++++++++++++++++++++++++++++++++++++++++++ - 5 files changed, 816 insertions(+) - create mode 100644 sound/soc/sunxi/Kconfig - create mode 100644 sound/soc/sunxi/Makefile - create mode 100644 sound/soc/sunxi/sunxi-codec.c - ---- a/sound/soc/Kconfig -+++ b/sound/soc/Kconfig -@@ -53,6 +53,7 @@ source "sound/soc/samsung/Kconfig" - source "sound/soc/sh/Kconfig" - source "sound/soc/sirf/Kconfig" - source "sound/soc/spear/Kconfig" -+source "sound/soc/sunxi/Kconfig" - source "sound/soc/tegra/Kconfig" - source "sound/soc/txx9/Kconfig" - source "sound/soc/ux500/Kconfig" ---- a/sound/soc/Makefile -+++ b/sound/soc/Makefile -@@ -34,6 +34,7 @@ obj-$(CONFIG_SND_SOC) += samsung/ - obj-$(CONFIG_SND_SOC) += sh/ - obj-$(CONFIG_SND_SOC) += sirf/ - obj-$(CONFIG_SND_SOC) += spear/ -+obj-$(CONFIG_SND_SOC) += sunxi/ - obj-$(CONFIG_SND_SOC) += tegra/ - obj-$(CONFIG_SND_SOC) += txx9/ - obj-$(CONFIG_SND_SOC) += ux500/ ---- /dev/null -+++ b/sound/soc/sunxi/Kconfig -@@ -0,0 +1,10 @@ -+menu "SoC Audio support for Allwinner SoCs" -+ depends on ARCH_SUNXI -+ -+config SND_SUNXI_SOC_CODEC -+ tristate "APB on-chip sun4i/sun5i/sun7i CODEC" -+ select SND_SOC_GENERIC_DMAENGINE_PCM -+ select REGMAP_MMIO -+ default y -+ -+endmenu ---- /dev/null -+++ b/sound/soc/sunxi/Makefile -@@ -0,0 +1,2 @@ -+obj-$(CONFIG_SND_SUNXI_SOC_CODEC) += sunxi-codec.o -+ ---- /dev/null -+++ b/sound/soc/sunxi/sunxi-codec.c -@@ -0,0 +1,802 @@ -+/* -+ * Copyright 2014 Emilio López <emilio@elopez.com.ar> -+ * Copyright 2014 Jon Smirl <jonsmirl@gmail.com> -+ * -+ * Based on the Allwinner SDK driver, released under the GPL. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/delay.h> -+#include <linux/slab.h> -+#include <linux/of.h> -+#include <linux/of_platform.h> -+#include <linux/of_address.h> -+#include <linux/clk.h> -+#include <linux/regmap.h> -+ -+#include <sound/core.h> -+#include <sound/pcm.h> -+#include <sound/pcm_params.h> -+#include <sound/soc.h> -+#include <sound/tlv.h> -+#include <sound/initval.h> -+#include <sound/dmaengine_pcm.h> -+ -+/* Codec DAC register offsets and bit fields */ -+#define SUNXI_DAC_DPC (0x00) -+#define SUNXI_DAC_DPC_EN_DA (31) -+#define SUNXI_DAC_DPC_DVOL (12) -+#define SUNXI_DAC_FIFOC (0x04) -+#define SUNXI_DAC_FIFOC_DAC_FS (29) -+#define SUNXI_DAC_FIFOC_FIR_VERSION (28) -+#define SUNXI_DAC_FIFOC_SEND_LASAT (26) -+#define SUNXI_DAC_FIFOC_TX_FIFO_MODE (24) -+#define SUNXI_DAC_FIFOC_DRQ_CLR_CNT (21) -+#define SUNXI_DAC_FIFOC_TX_TRIG_LEVEL (8) -+#define SUNXI_DAC_FIFOC_MONO_EN (6) -+#define SUNXI_DAC_FIFOC_TX_SAMPLE_BITS (5) -+#define SUNXI_DAC_FIFOC_DAC_DRQ_EN (4) -+#define SUNXI_DAC_FIFOC_FIFO_FLUSH (0) -+#define SUNXI_DAC_FIFOS (0x08) -+#define SUNXI_DAC_TXDATA (0x0c) -+#define SUNXI_DAC_ACTL (0x10) -+#define SUNXI_DAC_ACTL_DACAENR (31) -+#define SUNXI_DAC_ACTL_DACAENL (30) -+#define SUNXI_DAC_ACTL_MIXEN (29) -+#define SUNXI_DAC_ACTL_LDACLMIXS (15) -+#define SUNXI_DAC_ACTL_RDACRMIXS (14) -+#define SUNXI_DAC_ACTL_LDACRMIXS (13) -+#define SUNXI_DAC_ACTL_DACPAS (8) -+#define SUNXI_DAC_ACTL_MIXPAS (7) -+#define SUNXI_DAC_ACTL_PA_MUTE (6) -+#define SUNXI_DAC_ACTL_PA_VOL (0) -+#define SUNXI_DAC_TUNE (0x14) -+#define SUNXI_DAC_DEBUG (0x18) -+ -+/* Codec ADC register offsets and bit fields */ -+#define SUNXI_ADC_FIFOC (0x1c) -+#define SUNXI_ADC_FIFOC_EN_AD (28) -+#define SUNXI_ADC_FIFOC_RX_FIFO_MODE (24) -+#define SUNXI_ADC_FIFOC_RX_TRIG_LEVEL (8) -+#define SUNXI_ADC_FIFOC_MONO_EN (7) -+#define SUNXI_ADC_FIFOC_RX_SAMPLE_BITS (6) -+#define SUNXI_ADC_FIFOC_ADC_DRQ_EN (4) -+#define SUNXI_ADC_FIFOC_FIFO_FLUSH (0) -+#define SUNXI_ADC_FIFOS (0x20) -+#define SUNXI_ADC_RXDATA (0x24) -+#define SUNXI_ADC_ACTL (0x28) -+#define SUNXI_ADC_ACTL_ADCREN (31) -+#define SUNXI_ADC_ACTL_ADCLEN (30) -+#define SUNXI_ADC_ACTL_PREG1EN (29) -+#define SUNXI_ADC_ACTL_PREG2EN (28) -+#define SUNXI_ADC_ACTL_VMICEN (27) -+#define SUNXI_ADC_ACTL_VADCG (20) -+#define SUNXI_ADC_ACTL_ADCIS (17) -+#define SUNXI_ADC_ACTL_PA_EN (4) -+#define SUNXI_ADC_ACTL_DDE (3) -+#define SUNXI_ADC_DEBUG (0x2c) -+ -+/* Other various ADC registers */ -+#define SUNXI_DAC_TXCNT (0x30) -+#define SUNXI_ADC_RXCNT (0x34) -+#define SUNXI_AC_SYS_VERI (0x38) -+#define SUNXI_AC_MIC_PHONE_CAL (0x3c) -+ -+/* Supported SoC families - used for quirks */ -+enum sunxi_soc_family { -+ SUN4IA, /* A10 SoC - revision A */ -+ SUN4I, /* A10 SoC - later revisions */ -+ SUN5I, /* A10S/A13 SoCs */ -+ SUN7I, /* A20 SoC */ -+}; -+ -+struct sunxi_priv { -+ struct regmap *regmap; -+ struct clk *clk_apb, *clk_module; -+ -+ enum sunxi_soc_family revision; -+ -+ struct snd_dmaengine_dai_dma_data playback_dma_data; -+ struct snd_dmaengine_dai_dma_data capture_dma_data; -+}; -+ -+static void sunxi_codec_play_start(struct sunxi_priv *priv) -+{ -+ /* TODO: see if we need to drive PA GPIO high */ -+ -+ /* flush TX FIFO */ -+ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 0x1 << SUNXI_DAC_FIFOC_FIFO_FLUSH, 0x1 << SUNXI_DAC_FIFOC_FIFO_FLUSH); -+ -+ /* enable DAC DRQ */ -+ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 0x1 << SUNXI_DAC_FIFOC_DAC_DRQ_EN, 0x1 << SUNXI_DAC_FIFOC_DAC_DRQ_EN); -+} -+ -+static void sunxi_codec_play_stop(struct sunxi_priv *priv) -+{ -+ /* TODO: see if we need to drive PA GPIO low */ -+ -+ /* disable DAC DRQ */ -+ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 0x1 << SUNXI_DAC_FIFOC_DAC_DRQ_EN, 0x0 << SUNXI_DAC_FIFOC_DAC_DRQ_EN); -+} -+ -+static void sunxi_codec_capture_start(struct sunxi_priv *priv) -+{ -+ /* TODO: see if we need to drive PA GPIO high */ -+ -+ /* enable ADC DRQ */ -+ regmap_update_bits(priv->regmap, SUNXI_ADC_FIFOC, 0x1 << SUNXI_ADC_FIFOC_ADC_DRQ_EN, 0x1 << SUNXI_ADC_FIFOC_ADC_DRQ_EN); -+} -+ -+static void sunxi_codec_capture_stop(struct sunxi_priv *priv) -+{ -+ /* disable ADC DRQ */ -+ regmap_update_bits(priv->regmap, SUNXI_ADC_FIFOC, 0x1 << SUNXI_ADC_FIFOC_ADC_DRQ_EN, 0x0 << SUNXI_ADC_FIFOC_ADC_DRQ_EN); -+ -+ /* enable mic1 PA */ -+ regmap_update_bits(priv->regmap, SUNXI_ADC_ACTL, 0x1 << SUNXI_ADC_ACTL_PREG1EN, 0x0 << SUNXI_ADC_ACTL_PREG1EN); -+ -+ /* enable VMIC */ -+ regmap_update_bits(priv->regmap, SUNXI_ADC_ACTL, 0x1 << SUNXI_ADC_ACTL_VMICEN, 0x0 << SUNXI_ADC_ACTL_VMICEN); -+ if (priv->revision == SUN7I) { -+ /* TODO: undocumented */ -+ regmap_update_bits(priv->regmap, SUNXI_DAC_TUNE, 0x3 << 8, 0x0 << 8); -+ } -+ -+ /* enable ADC digital */ -+ regmap_update_bits(priv->regmap, SUNXI_ADC_FIFOC, 0x1 << SUNXI_ADC_FIFOC_EN_AD, 0x0 << SUNXI_ADC_FIFOC_EN_AD); -+ -+ /* set RX FIFO mode */ -+ regmap_update_bits(priv->regmap, SUNXI_ADC_FIFOC, 0x1 << SUNXI_ADC_FIFOC_RX_FIFO_MODE, 0x0 << SUNXI_ADC_FIFOC_RX_FIFO_MODE); -+ -+ /* flush RX FIFO */ -+ regmap_update_bits(priv->regmap, SUNXI_ADC_FIFOC, 0x1 << SUNXI_ADC_FIFOC_FIFO_FLUSH, 0x0 << SUNXI_ADC_FIFOC_FIFO_FLUSH); -+ -+ /* enable adc1 analog */ -+ regmap_update_bits(priv->regmap, SUNXI_ADC_ACTL, 0x3 << SUNXI_ADC_ACTL_ADCLEN, 0x0 << SUNXI_ADC_ACTL_ADCLEN); -+} -+ -+static int sunxi_codec_trigger(struct snd_pcm_substream *substream, int cmd, -+ struct snd_soc_dai *dai) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct sunxi_priv *priv = snd_soc_card_get_drvdata(rtd->card); -+ -+ switch (cmd) { -+ case SNDRV_PCM_TRIGGER_START: -+ case SNDRV_PCM_TRIGGER_RESUME: -+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: -+ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) -+ sunxi_codec_capture_start(priv); -+ else -+ sunxi_codec_play_start(priv); -+ break; -+ case SNDRV_PCM_TRIGGER_STOP: -+ case SNDRV_PCM_TRIGGER_SUSPEND: -+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH: -+ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) -+ sunxi_codec_capture_stop(priv); -+ else -+ sunxi_codec_play_stop(priv); -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+static int sunxi_codec_prepare(struct snd_pcm_substream *substream, -+ struct snd_soc_dai *dai) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct sunxi_priv *priv = snd_soc_card_get_drvdata(rtd->card); -+ -+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { -+ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 0x1 << SUNXI_DAC_FIFOC_FIFO_FLUSH, 0x1 << SUNXI_DAC_FIFOC_FIFO_FLUSH); -+ -+ /* set TX FIFO send DRQ level */ -+ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 0x3f << SUNXI_DAC_FIFOC_TX_TRIG_LEVEL, 0xf << SUNXI_DAC_FIFOC_TX_TRIG_LEVEL); -+ if (substream->runtime->rate > 32000) { -+ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 0x1 << SUNXI_DAC_FIFOC_FIR_VERSION, 0x0 << SUNXI_DAC_FIFOC_FIR_VERSION); -+ } else { -+ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 0x1 << SUNXI_DAC_FIFOC_FIR_VERSION, 0x1 << SUNXI_DAC_FIFOC_FIR_VERSION); -+ } -+ -+ /* set TX FIFO MODE - 0 works for both 16 and 24 bits */ -+ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 0x1 << SUNXI_DAC_FIFOC_TX_FIFO_MODE, 0x0 << SUNXI_DAC_FIFOC_TX_FIFO_MODE); -+ -+ /* send last sample when DAC FIFO under run */ -+ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 0x1 << SUNXI_DAC_FIFOC_SEND_LASAT, 0x0 << SUNXI_DAC_FIFOC_SEND_LASAT); -+ } else { -+ /* enable mic1 PA */ -+ regmap_update_bits(priv->regmap, SUNXI_ADC_ACTL, 0x1 << SUNXI_ADC_ACTL_PREG1EN, 0x1 << SUNXI_ADC_ACTL_PREG1EN); -+ -+ /* mic1 gain 32dB */ /* FIXME - makes no sense */ -+ regmap_update_bits(priv->regmap, SUNXI_ADC_ACTL, 0x3 << 25, 0x1 << 25); -+ -+ /* enable VMIC */ -+ regmap_update_bits(priv->regmap, SUNXI_ADC_ACTL, 0x1 << SUNXI_ADC_ACTL_VMICEN, 0x1 << SUNXI_ADC_ACTL_VMICEN); -+ -+ if (priv->revision == SUN7I) { -+ /* boost up record effect */ -+ regmap_update_bits(priv->regmap, SUNXI_DAC_TUNE, 0x3 << 8, 0x1 << 8); -+ } -+ -+ /* enable ADC digital */ -+ regmap_update_bits(priv->regmap, SUNXI_ADC_FIFOC, 0x1 << SUNXI_ADC_FIFOC_EN_AD, 0x1 << SUNXI_ADC_FIFOC_EN_AD); -+ -+ /* set RX FIFO mode */ -+ regmap_update_bits(priv->regmap, SUNXI_ADC_FIFOC, 0x1 << SUNXI_ADC_FIFOC_RX_FIFO_MODE, 0x1 << SUNXI_ADC_FIFOC_RX_FIFO_MODE); -+ -+ /* flush RX FIFO */ -+ regmap_update_bits(priv->regmap, SUNXI_ADC_FIFOC, 0x1 << SUNXI_ADC_FIFOC_FIFO_FLUSH, 0x1 << SUNXI_ADC_FIFOC_FIFO_FLUSH); -+ -+ /* set RX FIFO rec drq level */ -+ regmap_update_bits(priv->regmap, SUNXI_ADC_FIFOC, 0xf << SUNXI_ADC_FIFOC_RX_TRIG_LEVEL, 0x7 << SUNXI_ADC_FIFOC_RX_TRIG_LEVEL); -+ -+ /* enable adc1 analog */ -+ regmap_update_bits(priv->regmap, SUNXI_ADC_ACTL, 0x3 << SUNXI_ADC_ACTL_ADCLEN, 0x3 << SUNXI_ADC_ACTL_ADCLEN); -+ } -+ -+ return 0; -+} -+ -+static int sunxi_codec_hw_params(struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params, -+ struct snd_soc_dai *dai) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct sunxi_priv *priv = snd_soc_card_get_drvdata(rtd->card); -+ int is_mono = !!(params_channels(params) == 1); -+ int is_24bit = !!(hw_param_interval(params, SNDRV_PCM_HW_PARAM_SAMPLE_BITS)->min == 32); -+ unsigned int rate = params_rate(params); -+ unsigned int hwrate; -+ -+ switch (rate) { -+ case 176400: -+ case 88200: -+ case 44100: -+ case 33075: -+ case 22050: -+ case 14700: -+ case 11025: -+ case 7350: -+ default: -+ clk_set_rate(priv->clk_module, 22579200); -+ break; -+ case 192000: -+ case 96000: -+ case 48000: -+ case 32000: -+ case 24000: -+ case 16000: -+ case 12000: -+ case 8000: -+ clk_set_rate(priv->clk_module, 24576000); -+ break; -+ } -+ -+ switch (rate) { -+ case 192000: -+ case 176400: -+ hwrate = 6; -+ break; -+ case 96000: -+ case 88200: -+ hwrate = 7; -+ break; -+ default: -+ case 48000: -+ case 44100: -+ hwrate = 0; -+ break; -+ case 32000: -+ case 33075: -+ hwrate = 1; -+ break; -+ case 24000: -+ case 22050: -+ hwrate = 2; -+ break; -+ case 16000: -+ case 14700: -+ hwrate = 3; -+ break; -+ case 12000: -+ case 11025: -+ hwrate = 4; -+ break; -+ case 8000: -+ case 7350: -+ hwrate = 5; -+ break; -+ } -+ -+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { -+ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 7 << SUNXI_DAC_FIFOC_DAC_FS, hwrate << SUNXI_DAC_FIFOC_DAC_FS); -+ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 1 << SUNXI_DAC_FIFOC_MONO_EN, is_mono << SUNXI_DAC_FIFOC_MONO_EN); -+ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 1 << SUNXI_DAC_FIFOC_TX_SAMPLE_BITS, is_24bit << SUNXI_DAC_FIFOC_TX_SAMPLE_BITS); -+ if (is_24bit) -+ priv->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; -+ else -+ priv->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; -+ } else { -+ regmap_update_bits(priv->regmap, SUNXI_ADC_FIFOC, 7 << SUNXI_DAC_FIFOC_DAC_FS, hwrate << SUNXI_DAC_FIFOC_DAC_FS); -+ regmap_update_bits(priv->regmap, SUNXI_ADC_FIFOC, 1 << SUNXI_ADC_FIFOC_MONO_EN, is_mono << SUNXI_ADC_FIFOC_MONO_EN); -+ } -+ -+ return 0; -+} -+ -+static const struct snd_kcontrol_new sun7i_dac_ctls[] = { -+ /*SUNXI_DAC_ACTL = 0x10,PAVOL*/ -+ SOC_SINGLE("Master Playback Volume", SUNXI_DAC_ACTL, 0, 0x3f, 0), -+ SOC_SINGLE("Playback Switch", SUNXI_DAC_ACTL, 6, 1, 0), /* Global output switch */ -+ SOC_SINGLE("FmL Switch", SUNXI_DAC_ACTL, 17, 1, 0), /* FM left switch */ -+ SOC_SINGLE("FmR Switch", SUNXI_DAC_ACTL, 16, 1, 0), /* FM right switch */ -+ SOC_SINGLE("LineL Switch", SUNXI_DAC_ACTL, 19, 1, 0), /* Line left switch */ -+ SOC_SINGLE("LineR Switch", SUNXI_DAC_ACTL, 18, 1, 0), /* Line right switch */ -+ SOC_SINGLE("Ldac Left Mixer", SUNXI_DAC_ACTL, 15, 1, 0), -+ SOC_SINGLE("Rdac Right Mixer", SUNXI_DAC_ACTL, 14, 1, 0), -+ SOC_SINGLE("Ldac Right Mixer", SUNXI_DAC_ACTL, 13, 1, 0), -+ SOC_SINGLE("Mic Input Mux", SUNXI_DAC_ACTL, 9, 15, 0), /* from bit 9 to bit 12. Microphone input mute */ -+ SOC_SINGLE("MIC output volume", SUNXI_DAC_ACTL, 20, 7, 0), -+ /* FM Input to output mixer Gain Control -+ * From -4.5db to 6db,1.5db/step,default is 0db -+ * -4.5db:0x0,-3.0db:0x1,-1.5db:0x2,0db:0x3 -+ * 1.5db:0x4,3.0db:0x5,4.5db:0x6,6db:0x7 -+ */ -+ SOC_SINGLE("Fm output Volume", SUNXI_DAC_ACTL, 23, 7, 0), -+ /* Line-in gain stage to output mixer Gain Control -+ * 0:-1.5db,1:0db -+ */ -+ SOC_SINGLE("Line output Volume", SUNXI_DAC_ACTL, 26, 1, 0), -+ -+ SOC_SINGLE("Master Capture Mute", SUNXI_ADC_ACTL, 4, 1, 0), -+ SOC_SINGLE("Right Capture Mute", SUNXI_ADC_ACTL, 31, 1, 0), -+ SOC_SINGLE("Left Capture Mute", SUNXI_ADC_ACTL, 30, 1, 0), -+ SOC_SINGLE("Linein Pre-AMP", SUNXI_ADC_ACTL, 13, 7, 0), -+ SOC_SINGLE("LINEIN APM Volume", SUNXI_AC_MIC_PHONE_CAL, 13, 0x7, 0), -+ /* ADC Input Gain Control, capture volume -+ * 000:-4.5db,001:-3db,010:-1.5db,011:0db,100:1.5db,101:3db,110:4.5db,111:6db -+ */ -+ SOC_SINGLE("Capture Volume", SUNXI_ADC_ACTL, 20, 7, 0), -+ /* -+ * MIC2 pre-amplifier Gain Control -+ * 00:0db,01:35db,10:38db,11:41db -+ */ -+ SOC_SINGLE("MicL Volume", SUNXI_ADC_ACTL, 25, 3, 0), /* Microphone left volume */ -+ SOC_SINGLE("MicR Volume", SUNXI_ADC_ACTL, 23, 3, 0), /* Microphone right volume */ -+ SOC_SINGLE("Mic2 Boost", SUNXI_ADC_ACTL, 29, 1, 0), -+ SOC_SINGLE("Mic1 Boost", SUNXI_ADC_ACTL, 28, 1, 0), -+ SOC_SINGLE("Mic Power", SUNXI_ADC_ACTL, 27, 1, 0), -+ SOC_SINGLE("ADC Input Mux", SUNXI_ADC_ACTL, 17, 7, 0), /* ADC input mute */ -+ SOC_SINGLE("Mic2 gain Volume", SUNXI_AC_MIC_PHONE_CAL, 26, 7, 0), -+ /* -+ * MIC1 pre-amplifier Gain Control -+ * 00:0db,01:35db,10:38db,11:41db -+ */ -+ SOC_SINGLE("Mic1 gain Volume", SUNXI_AC_MIC_PHONE_CAL, 29, 3, 0), -+}; -+ -+static int sunxi_codec_dai_probe(struct snd_soc_dai *dai) -+{ -+ struct snd_soc_card *card = snd_soc_dai_get_drvdata(dai); -+ struct sunxi_priv *priv = snd_soc_card_get_drvdata(card); -+ -+ snd_soc_dai_init_dma_data(dai, &priv->playback_dma_data, &priv->capture_dma_data); -+ -+ return 0; -+} -+ -+static void sunxi_codec_init(struct sunxi_priv *priv) -+{ -+ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 1 << SUNXI_DAC_FIFOC_FIR_VERSION, 1 << SUNXI_DAC_FIFOC_FIR_VERSION); -+ -+ /* set digital volume to maximum */ -+ if (priv->revision == SUN4IA) -+ regmap_update_bits(priv->regmap, SUNXI_DAC_DPC, 0x3F << SUNXI_DAC_DPC_DVOL, 0 << SUNXI_DAC_DPC_DVOL); -+ -+ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 3 << SUNXI_DAC_FIFOC_DRQ_CLR_CNT, 3 << SUNXI_DAC_FIFOC_DRQ_CLR_CNT); -+ -+ /* set volume */ /* TODO: is A10A inverted? */ -+ if (priv->revision == SUN4IA) -+ regmap_update_bits(priv->regmap, SUNXI_DAC_ACTL, 0x3f << SUNXI_DAC_ACTL_PA_VOL, 1 << SUNXI_DAC_ACTL_PA_VOL); -+ else -+ regmap_update_bits(priv->regmap, SUNXI_DAC_ACTL, 0x3f << SUNXI_DAC_ACTL_PA_VOL, 0x3b << SUNXI_DAC_ACTL_PA_VOL); -+} -+ -+static int sunxi_codec_startup(struct snd_pcm_substream *substream, -+ struct snd_soc_dai *dai) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct sunxi_priv *priv = snd_soc_card_get_drvdata(rtd->card); -+ -+ sunxi_codec_init(priv); -+ -+ return clk_prepare_enable(priv->clk_module); -+} -+ -+static void sunxi_codec_shutdown(struct snd_pcm_substream *substream, -+ struct snd_soc_dai *dai) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct sunxi_priv *priv = snd_soc_card_get_drvdata(rtd->card); -+ -+ clk_disable_unprepare(priv->clk_module); -+} -+ -+/*** Codec DAI ***/ -+ -+static const struct snd_soc_dai_ops sunxi_codec_dai_ops = { -+ .startup = sunxi_codec_startup, -+ .shutdown = sunxi_codec_shutdown, -+ .trigger = sunxi_codec_trigger, -+ .hw_params = sunxi_codec_hw_params, -+ .prepare = sunxi_codec_prepare, -+}; -+ -+static struct snd_soc_dai_driver sunxi_codec_dai = { -+ .name = "Codec", -+ .playback = { -+ .stream_name = "Codec Playback", -+ .channels_min = 1, -+ .channels_max = 2, -+ .rate_min = 8000, -+ .rate_max = 192000, -+ .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_11025 |\ -+ SNDRV_PCM_RATE_22050| SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\ -+ SNDRV_PCM_RATE_48000 |SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000 |\ -+ SNDRV_PCM_RATE_KNOT), -+ .formats = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE), -+ .sig_bits = 24, -+ }, -+ .capture = { -+ .stream_name = "Codec Capture", -+ .channels_min = 1, -+ .channels_max = 2, -+ .rate_min = 8000, -+ .rate_max = 192000, -+ .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_11025 |\ -+ SNDRV_PCM_RATE_22050| SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\ -+ SNDRV_PCM_RATE_48000 |SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000 |\ -+ SNDRV_PCM_RATE_KNOT), -+ .formats = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE), -+ .sig_bits = 24, -+ }, -+ .ops = &sunxi_codec_dai_ops, -+}; -+ -+/*** Codec ***/ -+ -+static const struct snd_kcontrol_new sunxi_pa = -+ SOC_DAPM_SINGLE("PA Switch", SUNXI_ADC_ACTL, SUNXI_ADC_ACTL_PA_EN, 1, 0); -+ -+static const struct snd_kcontrol_new sunxi_pa_mute = -+ SOC_DAPM_SINGLE("PA Mute Switch", SUNXI_DAC_ACTL, SUNXI_DAC_ACTL_PA_MUTE, 1, 0); -+ -+static DECLARE_TLV_DB_SCALE(sunxi_pa_volume_scale, -6300, 100, 1); -+ -+static const struct snd_kcontrol_new sunxi_codec_widgets[] = { -+ SOC_SINGLE_TLV("PA Volume", SUNXI_DAC_ACTL, SUNXI_DAC_ACTL_PA_VOL, -+ 0x3F, 0, sunxi_pa_volume_scale), -+}; -+ -+static const char *right_output_mixer_text[] = { "Disabled", "Left", "Right" }; -+static const unsigned int right_output_mixer_values[] = { 0x0, 0x1, 0x2 }; -+static SOC_VALUE_ENUM_SINGLE_DECL(right_output_mixer, SUNXI_DAC_ACTL, -+ SUNXI_DAC_ACTL_LDACRMIXS, 0x3, -+ right_output_mixer_text, -+ right_output_mixer_values); -+ -+static const char *left_output_mixer_text[] = { "Disabled", "Left" }; -+static const unsigned int left_output_mixer_values[] = { 0x0, 0x1 }; -+static SOC_VALUE_ENUM_SINGLE_DECL(left_output_mixer, SUNXI_DAC_ACTL, -+ SUNXI_DAC_ACTL_LDACLMIXS, 0x1, -+ left_output_mixer_text, -+ left_output_mixer_values); -+ -+static const struct snd_kcontrol_new right_mixer = -+ SOC_DAPM_ENUM("Right Mixer", right_output_mixer); -+ -+static const struct snd_kcontrol_new left_mixer = -+ SOC_DAPM_ENUM("Left Mixer", left_output_mixer); -+ -+static const struct snd_kcontrol_new sunxi_mixer = -+ SOC_DAPM_SINGLE("Mixer Switch", SUNXI_DAC_ACTL, SUNXI_DAC_ACTL_MIXEN, 1, 0); -+ -+static const char *sunxi_dac_output_text[] = { "Muted", "Mixed", "Direct" }; -+static const unsigned int sunxi_dac_output_values[] = { 0x0, 0x1, 0x2 }; -+static SOC_VALUE_ENUM_SINGLE_DECL(dac_output_mux, SUNXI_DAC_ACTL, -+ SUNXI_DAC_ACTL_MIXPAS, 0x3, -+ sunxi_dac_output_text, -+ sunxi_dac_output_values); -+ -+static const struct snd_kcontrol_new sunxi_dac_output = -+ SOC_DAPM_ENUM("DAC Output", dac_output_mux); -+ -+static const struct snd_soc_dapm_widget codec_dapm_widgets[] = { -+ /* Digital parts of the DACs */ -+ SND_SOC_DAPM_SUPPLY("DAC", SUNXI_DAC_DPC, SUNXI_DAC_DPC_EN_DA, 0, NULL, 0), -+ -+ /* Analog parts of the DACs */ -+ SND_SOC_DAPM_DAC("Left DAC", NULL, SUNXI_DAC_ACTL, SUNXI_DAC_ACTL_DACAENL, 0), -+ SND_SOC_DAPM_DAC("Right DAC", NULL, SUNXI_DAC_ACTL, SUNXI_DAC_ACTL_DACAENR, 0), -+ -+ SND_SOC_DAPM_SWITCH("PA", SUNXI_ADC_ACTL, SUNXI_ADC_ACTL_PA_EN, 0, &sunxi_pa), -+ SND_SOC_DAPM_SWITCH("PA Mute", SUNXI_DAC_ACTL, SUNXI_DAC_ACTL_PA_MUTE, 0, &sunxi_pa_mute), -+ -+ SND_SOC_DAPM_MUX("Right Mixer", SUNXI_DAC_ACTL, SUNXI_DAC_ACTL_LDACRMIXS, 0, &right_mixer), -+ SND_SOC_DAPM_MUX("Left Mixer", SUNXI_DAC_ACTL, SUNXI_DAC_ACTL_LDACLMIXS, 0, &left_mixer), -+ SND_SOC_DAPM_SWITCH("Mixer", SUNXI_DAC_ACTL, SUNXI_DAC_ACTL_MIXEN, 0, &sunxi_mixer), -+ -+ SND_SOC_DAPM_MUX("DAC Output", SUNXI_DAC_ACTL, SUNXI_DAC_ACTL_MIXPAS, 0, &sunxi_dac_output), -+ -+ SND_SOC_DAPM_OUTPUT("Mic Bias"), -+ SND_SOC_DAPM_OUTPUT("HP Right"), -+ SND_SOC_DAPM_OUTPUT("HP Left"), -+ SND_SOC_DAPM_INPUT("MIC_IN"), -+ SND_SOC_DAPM_INPUT("LINE_IN"), -+}; -+ -+static const struct snd_soc_dapm_route codec_dapm_routes[] = { -+ /* DAC block */ -+ { "Left DAC", NULL, "Codec Playback" }, -+ { "Right DAC", NULL, "Codec Playback" }, -+ { "Left DAC", NULL, "DAC" }, -+ { "Right DAC", NULL, "DAC" }, -+ -+ /* DAC -> PA path */ -+ { "DAC Output", "Direct", "Left DAC" }, -+ { "DAC Output", "Direct", "Right DAC" }, -+ { "PA", NULL, "DAC Output"}, -+ -+ /* DAC -> MIX -> PA path */ -+ { "Left Mixer", "Left", "Left DAC" }, -+ { "Right Mixer", "Right", "Right DAC" }, -+ { "Mixer", NULL, "Left Mixer" }, -+ { "Mixer", NULL, "Right Mixer" }, -+ { "DAC Output", "Mixed", "Mixer" }, -+ { "PA", NULL, "DAC Output" }, -+ -+ /* PA -> HP path */ -+ { "PA Mute", NULL, "PA" }, -+ { "HP Right", NULL, "PA Mute" }, -+ { "HP Left", NULL, "PA Mute" }, -+}; -+ -+static struct snd_soc_codec_driver sunxi_codec = { -+ .controls = sunxi_codec_widgets, -+ .num_controls = ARRAY_SIZE(sunxi_codec_widgets), -+ .dapm_widgets = codec_dapm_widgets, -+ .num_dapm_widgets = ARRAY_SIZE(codec_dapm_widgets), -+ .dapm_routes = codec_dapm_routes, -+ .num_dapm_routes = ARRAY_SIZE(codec_dapm_routes), -+}; -+ -+/*** Board routing ***/ -+/* TODO: do this with DT */ -+ -+static const struct snd_soc_dapm_widget sunxi_board_dapm_widgets[] = { -+ SND_SOC_DAPM_HP("Headphone Jack", NULL), -+}; -+ -+static const struct snd_soc_dapm_route sunxi_board_routing[] = { -+ { "Headphone Jack", NULL, "HP Right" }, -+ { "Headphone Jack", NULL, "HP Left" }, -+}; -+ -+/*** Card and DAI Link ***/ -+ -+static struct snd_soc_dai_link cdc_dai = { -+ .name = "cdc", -+ -+ .stream_name = "CDC PCM", -+ .codec_dai_name = "Codec", -+ .cpu_dai_name = "1c22c00.codec", -+ .codec_name = "1c22c00.codec", -+ .platform_name = "1c22c00.codec", -+ .dai_fmt = SND_SOC_DAIFMT_I2S, -+}; -+ -+static struct snd_soc_card snd_soc_sunxi_codec = { -+ .name = "sunxi-codec", -+ .owner = THIS_MODULE, -+ .dai_link = &cdc_dai, -+ .num_links = 1, -+ .dapm_widgets = sunxi_board_dapm_widgets, -+ .num_dapm_widgets = ARRAY_SIZE(sunxi_board_dapm_widgets), -+ .dapm_routes = sunxi_board_routing, -+ .num_dapm_routes = ARRAY_SIZE(sunxi_board_routing), -+}; -+ -+/*** CPU DAI ***/ -+ -+static const struct snd_soc_component_driver sunxi_codec_component = { -+ .name = "sunxi-codec", -+}; -+ -+#define SUNXI_RATES SNDRV_PCM_RATE_8000_192000 -+#define SUNXI_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ -+ SNDRV_PCM_FMTBIT_S32_LE) -+ -+static struct snd_soc_dai_driver dummy_cpu_dai = { -+ .name = "sunxi-cpu-dai", -+ .probe = sunxi_codec_dai_probe, -+ .playback = { -+ .stream_name = "Playback", -+ .channels_min = 1, -+ .channels_max = 2, -+ .rates = SUNXI_RATES, -+ .formats = SUNXI_FORMATS, -+ .sig_bits = 24, -+ }, -+ .capture = { -+ .stream_name = "Capture", -+ .channels_min = 1, -+ .channels_max = 2, -+ .rates = SUNXI_RATES, -+ .formats = SUNXI_FORMATS, -+ .sig_bits = 24, -+ }, -+}; -+ -+static const struct regmap_config sunxi_codec_regmap_config = { -+ .reg_bits = 32, -+ .reg_stride = 4, -+ .val_bits = 32, -+ .max_register = SUNXI_AC_MIC_PHONE_CAL, -+}; -+ -+static const struct of_device_id sunxi_codec_of_match[] = { -+ { .compatible = "allwinner,sun4i-a10a-codec", .data = (void *)SUN4IA}, -+ { .compatible = "allwinner,sun4i-a10-codec", .data = (void *)SUN4I}, -+ { .compatible = "allwinner,sun5i-a13-codec", .data = (void *)SUN5I}, -+ { .compatible = "allwinner,sun7i-a20-codec", .data = (void *)SUN7I}, -+ {} -+}; -+MODULE_DEVICE_TABLE(of, sunxi_codec_of_match); -+ -+static int sunxi_codec_probe(struct platform_device *pdev) -+{ -+ struct device_node *np = pdev->dev.of_node; -+ struct snd_soc_card *card = &snd_soc_sunxi_codec; -+ const struct of_device_id *of_id; -+ struct device *dev = &pdev->dev; -+ struct sunxi_priv *priv; -+ struct resource *res; -+ void __iomem *base; -+ int ret; -+ -+ if (!of_device_is_available(np)) -+ return -ENODEV; -+ -+ of_id = of_match_device(sunxi_codec_of_match, dev); -+ if (!of_id) -+ return -EINVAL; -+ -+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ -+ card->dev = &pdev->dev; -+ platform_set_drvdata(pdev, card); -+ snd_soc_card_set_drvdata(card, priv); -+ -+ priv->revision = (enum sunxi_soc_family)of_id->data; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(base)) -+ return PTR_ERR(base); -+ -+ priv->regmap = devm_regmap_init_mmio(&pdev->dev, base, -+ &sunxi_codec_regmap_config); -+ if (IS_ERR(priv->regmap)) -+ return PTR_ERR(priv->regmap); -+ -+ /* Get the clocks from the DT */ -+ priv->clk_apb = devm_clk_get(dev, "apb"); -+ if (IS_ERR(priv->clk_apb)) { -+ dev_err(dev, "failed to get apb clock\n"); -+ return PTR_ERR(priv->clk_apb); -+ } -+ priv->clk_module = devm_clk_get(dev, "codec"); -+ if (IS_ERR(priv->clk_module)) { -+ dev_err(dev, "failed to get codec clock\n"); -+ return PTR_ERR(priv->clk_module); -+ } -+ -+ /* Enable the clock on a basic rate */ -+ ret = clk_set_rate(priv->clk_module, 24576000); -+ if (ret) { -+ dev_err(dev, "failed to set codec base clock rate\n"); -+ return ret; -+ } -+ -+ /* Enable the bus clock */ -+ if (clk_prepare_enable(priv->clk_apb)) { -+ dev_err(dev, "failed to enable apb clock\n"); -+ clk_disable_unprepare(priv->clk_module); -+ return -EINVAL; -+ } -+ -+ /* DMA configuration for TX FIFO */ -+ priv->playback_dma_data.addr = res->start + SUNXI_DAC_TXDATA; -+ priv->playback_dma_data.maxburst = 4; -+ priv->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; -+ -+ /* DMA configuration for RX FIFO */ -+ priv->capture_dma_data.addr = res->start + SUNXI_ADC_RXDATA; -+ priv->capture_dma_data.maxburst = 4; -+ priv->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; -+ -+ ret = snd_soc_register_codec(&pdev->dev, &sunxi_codec, &sunxi_codec_dai, 1); -+ -+ ret = devm_snd_soc_register_component(&pdev->dev, &sunxi_codec_component, &dummy_cpu_dai, 1); -+ if (ret) -+ goto err_clk_disable; -+ -+ ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0); -+ if (ret) -+ goto err_clk_disable; -+ -+ sunxi_codec_init(priv); -+ -+ ret = snd_soc_register_card(card); -+ if (ret) { -+ dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret); -+ goto err_fini_utils; -+ } -+ -+ ret = snd_soc_of_parse_audio_routing(card, "routing"); -+ if (ret) -+ goto err; -+ -+ return 0; -+ -+err_fini_utils: -+err: -+err_clk_disable: -+ clk_disable_unprepare(priv->clk_apb); -+ return ret; -+} -+ -+static int sunxi_codec_remove(struct platform_device *pdev) -+{ -+ struct sunxi_priv *priv = platform_get_drvdata(pdev); -+ -+ clk_disable_unprepare(priv->clk_apb); -+ clk_disable_unprepare(priv->clk_module); -+ -+ return 0; -+} -+ -+static struct platform_driver sunxi_codec_driver = { -+ .driver = { -+ .name = "sunxi-codec", -+ .owner = THIS_MODULE, -+ .of_match_table = sunxi_codec_of_match, -+ }, -+ .probe = sunxi_codec_probe, -+ .remove = sunxi_codec_remove, -+}; -+module_platform_driver(sunxi_codec_driver); -+ -+MODULE_DESCRIPTION("sunxi codec ASoC driver"); -+MODULE_AUTHOR("Emilio López <emilio@elopez.com.ar>"); -+MODULE_AUTHOR("Jon Smirl <jonsmirl@gmail.com>"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/sunxi/patches-4.1/166-asoc-sunxi-fix-distortion-on-16bit-mono.patch b/target/linux/sunxi/patches-4.1/166-asoc-sunxi-fix-distortion-on-16bit-mono.patch deleted file mode 100644 index b3668de..0000000 --- a/target/linux/sunxi/patches-4.1/166-asoc-sunxi-fix-distortion-on-16bit-mono.patch +++ /dev/null @@ -1,33 +0,0 @@ -From f8517e7d836269f5fa1e1049394104417d3a7357 Mon Sep 17 00:00:00 2001 -From: "B.R. Oake" <broake@openmailbox.org> -Date: Sat, 6 Sep 2014 14:58:50 +0000 -Subject: [PATCH] ASoC: sunxi-codec: Fix distortion on 16-bit mono - -Patch to remove distortion on 16-bit mono, based on the linux-sunxi-3.4 -code. - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - sound/soc/sunxi/sunxi-codec.c | 4 +--- - 1 file changed, 1 insertion(+), 3 deletions(-) - ---- a/sound/soc/sunxi/sunxi-codec.c -+++ b/sound/soc/sunxi/sunxi-codec.c -@@ -215,9 +215,6 @@ static int sunxi_codec_prepare(struct sn - regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 0x1 << SUNXI_DAC_FIFOC_FIR_VERSION, 0x1 << SUNXI_DAC_FIFOC_FIR_VERSION); - } - -- /* set TX FIFO MODE - 0 works for both 16 and 24 bits */ -- regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 0x1 << SUNXI_DAC_FIFOC_TX_FIFO_MODE, 0x0 << SUNXI_DAC_FIFOC_TX_FIFO_MODE); -- - /* send last sample when DAC FIFO under run */ - regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 0x1 << SUNXI_DAC_FIFOC_SEND_LASAT, 0x0 << SUNXI_DAC_FIFOC_SEND_LASAT); - } else { -@@ -329,6 +326,7 @@ static int sunxi_codec_hw_params(struct - regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 7 << SUNXI_DAC_FIFOC_DAC_FS, hwrate << SUNXI_DAC_FIFOC_DAC_FS); - regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 1 << SUNXI_DAC_FIFOC_MONO_EN, is_mono << SUNXI_DAC_FIFOC_MONO_EN); - regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 1 << SUNXI_DAC_FIFOC_TX_SAMPLE_BITS, is_24bit << SUNXI_DAC_FIFOC_TX_SAMPLE_BITS); -+ regmap_update_bits(priv->regmap, SUNXI_DAC_FIFOC, 1 << SUNXI_DAC_FIFOC_TX_FIFO_MODE, !is_24bit << SUNXI_DAC_FIFOC_TX_FIFO_MODE); - if (is_24bit) - priv->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - else diff --git a/target/linux/sunxi/patches-4.1/167-1-dt-sun7i-add-codec-node.patch b/target/linux/sunxi/patches-4.1/167-1-dt-sun7i-add-codec-node.patch deleted file mode 100644 index 43997e1..0000000 --- a/target/linux/sunxi/patches-4.1/167-1-dt-sun7i-add-codec-node.patch +++ /dev/null @@ -1,34 +0,0 @@ -From ca3f125c08bab943572a15ac3a52f33f132cf77f Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <elopez93@gmail.com> -Date: Mon, 18 Aug 2014 01:07:55 -0300 -Subject: [PATCH] ARM: sun7i: dt: Add sunxi codec device node - -The A20 SoC includes the Allwinner audio codec, capable of both 24-bit -playback and capture. This commit adds a device node for it. - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -1182,6 +1182,18 @@ - status = "disabled"; - }; - -+ codec: codec@01c22c00 { -+ #sound-dai-cells = <0>; -+ compatible = "allwinner,sun7i-a20-codec"; -+ reg = <0x01c22c00 0x40>; -+ interrupts = <0 30 4>; -+ clocks = <&apb0_gates 0>, <&codec_clk>; -+ clock-names = "apb", "codec"; -+ dmas = <&dma 0 19>, <&dma 0 19>; -+ dma-names = "rx", "tx"; -+ status = "disabled"; -+ }; -+ - sid: eeprom@01c23800 { - compatible = "allwinner,sun7i-a20-sid"; - reg = <0x01c23800 0x200>; diff --git a/target/linux/sunxi/patches-4.1/167-2-dt-sun7i-add-codec-to-a20-olinuxino-micro.patch b/target/linux/sunxi/patches-4.1/167-2-dt-sun7i-add-codec-to-a20-olinuxino-micro.patch deleted file mode 100644 index 8b4dbe4..0000000 --- a/target/linux/sunxi/patches-4.1/167-2-dt-sun7i-add-codec-to-a20-olinuxino-micro.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -@@ -302,3 +302,10 @@ - }; - }; - -+ -+&codec { -+ routing = -+ "Headphone Jack", "HP Left", -+ "Headphone Jack", "HP Right"; -+ status = "okay"; -+}; diff --git a/target/linux/sunxi/patches-4.1/167-3-dt-sun7i-add-codec-to-cubieboard2.patch b/target/linux/sunxi/patches-4.1/167-3-dt-sun7i-add-codec-to-cubieboard2.patch deleted file mode 100644 index e296638..0000000 --- a/target/linux/sunxi/patches-4.1/167-3-dt-sun7i-add-codec-to-cubieboard2.patch +++ /dev/null @@ -1,26 +0,0 @@ -From f9681320a1c1caed9c899acfefcb308ac7c911d1 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard <maxime.ripard@free-electrons.com> -Date: Fri, 1 May 2015 22:39:45 +0200 -Subject: [PATCH] Add cubieboard2 audio codec - -Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> ---- - arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -@@ -180,6 +180,13 @@ - - #include "axp209.dtsi" - -+&codec { -+ routing = -+ "Headphone Jack", "HP Left", -+ "Headphone Jack", "HP Right"; -+ status = "okay"; -+}; -+ - &cpu0 { - cpu-supply = <®_dcdc2>; - }; diff --git a/target/linux/sunxi/patches-4.1/167-4-dt-sun7i-add-codec-to-cubietruck.patch b/target/linux/sunxi/patches-4.1/167-4-dt-sun7i-add-codec-to-cubietruck.patch deleted file mode 100644 index afa42e1..0000000 --- a/target/linux/sunxi/patches-4.1/167-4-dt-sun7i-add-codec-to-cubietruck.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 42ac277ad129cf69d5540938c943f6291a7a9898 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <elopez93@gmail.com> -Date: Mon, 18 Aug 2014 01:10:05 -0300 -Subject: [PATCH] ARM: sun7i: dt: enable audio codec on Cubietruck - -This commit enables the on-chip audio codec present on the A20 SoC -and outlines the SoC to connector routes for the Cubietruck. - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -@@ -257,6 +257,13 @@ - - #include "axp209.dtsi" - -+&codec { -+ routing = -+ "Headphone Jack", "HP Left", -+ "Headphone Jack", "HP Right"; -+ status = "okay"; -+}; -+ - &cpu0 { - cpu-supply = <®_dcdc2>; - }; diff --git a/target/linux/sunxi/patches-4.1/170-musb-add-driver.patch b/target/linux/sunxi/patches-4.1/170-musb-add-driver.patch deleted file mode 100644 index c90156d..0000000 --- a/target/linux/sunxi/patches-4.1/170-musb-add-driver.patch +++ /dev/null @@ -1,810 +0,0 @@ -From 744543c599c420bcddca08cd2e2713b82a008328 Mon Sep 17 00:00:00 2001 -From: Hans de Goede <hdegoede@redhat.com> -Date: Wed, 8 Jul 2015 16:41:38 +0200 -Subject: [PATCH] usb: musb: sunxi: Add support for the Allwinner sunxi musb - controller - -This is based on initial code to get the Allwinner sunxi musb controller -supported by Chen-Yu Tsai and Roman Byshko. - -This adds support for the Allwinner sunxi musb controller in both host only -and otg mode. Peripheral only mode is not supported, as no boards use that. - -This has been tested on a cubietruck (A20 SoC) and an UTOO P66 tablet -(A13 SoC) with a variety of devices in host mode and with the g_serial gadget -driver in peripheral mode, plugging otg / host cables in/out a lot of times -in all possible imaginable plug orders. - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> -Signed-off-by: Felipe Balbi <balbi@ti.com> ---- - .../bindings/usb/allwinner,sun4i-a10-musb.txt | 27 + - drivers/usb/musb/Kconfig | 13 +- - drivers/usb/musb/Makefile | 1 + - drivers/usb/musb/sunxi.c | 703 +++++++++++++++++++++ - 4 files changed, 743 insertions(+), 1 deletion(-) - create mode 100644 Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt - create mode 100644 drivers/usb/musb/sunxi.c - ---- /dev/null -+++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt -@@ -0,0 +1,27 @@ -+Allwinner sun4i A10 musb DRC/OTG controller -+------------------------------------------- -+ -+Required properties: -+ - compatible : "allwinner,sun4i-a10-musb" -+ - reg : mmio address range of the musb controller -+ - clocks : clock specifier for the musb controller ahb gate clock -+ - interrupts : interrupt to which the musb controller is connected -+ - interrupt-names : must be "mc" -+ - phys : phy specifier for the otg phy -+ - phy-names : must be "usb" -+ - dr_mode : Dual-Role mode must be "host" or "otg" -+ - extcon : extcon specifier for the otg phy -+ -+Example: -+ -+ usb_otg: usb@01c13000 { -+ compatible = "allwinner,sun4i-a10-musb"; -+ reg = <0x01c13000 0x0400>; -+ clocks = <&ahb_gates 0>; -+ interrupts = <38>; -+ interrupt-names = "mc"; -+ phys = <&usbphy 0>; -+ phy-names = "usb"; -+ extcon = <&usbphy 0>; -+ status = "disabled"; -+ }; ---- a/drivers/usb/musb/Kconfig -+++ b/drivers/usb/musb/Kconfig -@@ -5,7 +5,7 @@ - - # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller - config USB_MUSB_HDRC -- tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' -+ tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, AW, ...)' - depends on (USB || USB_GADGET) - help - Say Y here if your system has a dual role high speed USB -@@ -20,6 +20,8 @@ config USB_MUSB_HDRC - Analog Devices parts using this IP include Blackfin BF54x, - BF525 and BF527. - -+ Allwinner SoCs using this IP include A10, A13, A20, ... -+ - If you do not know what this is, please say N. - - To compile this driver as a module, choose M here; the -@@ -60,6 +62,15 @@ endchoice - - comment "Platform Glue Layer" - -+config USB_MUSB_SUNXI -+ tristate "Allwinner (sunxi)" -+ depends on ARCH_SUNXI -+ depends on NOP_USB_XCEIV -+ depends on PHY_SUN4I_USB -+ depends on EXTCON -+ depends on GENERIC_PHY -+ select SUNXI_SRAM -+ - config USB_MUSB_DAVINCI - tristate "DaVinci" - depends on ARCH_DAVINCI_DMx ---- a/drivers/usb/musb/Makefile -+++ b/drivers/usb/musb/Makefile -@@ -20,6 +20,7 @@ obj-$(CONFIG_USB_MUSB_DA8XX) += da8xx. - obj-$(CONFIG_USB_MUSB_BLACKFIN) += blackfin.o - obj-$(CONFIG_USB_MUSB_UX500) += ux500.o - obj-$(CONFIG_USB_MUSB_JZ4740) += jz4740.o -+obj-$(CONFIG_USB_MUSB_SUNXI) += sunxi.o - - - obj-$(CONFIG_USB_MUSB_AM335X_CHILD) += musb_am335x.o ---- /dev/null -+++ b/drivers/usb/musb/sunxi.c -@@ -0,0 +1,703 @@ -+/* -+ * Allwinner sun4i MUSB Glue Layer -+ * -+ * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com> -+ * -+ * Based on code from -+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include <linux/clk.h> -+#include <linux/err.h> -+#include <linux/extcon.h> -+#include <linux/io.h> -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/of.h> -+#include <linux/phy/phy-sun4i-usb.h> -+#include <linux/platform_device.h> -+#include <linux/soc/sunxi/sunxi_sram.h> -+#include <linux/usb/musb.h> -+#include <linux/usb/of.h> -+#include <linux/usb/usb_phy_generic.h> -+#include <linux/workqueue.h> -+#include "musb_core.h" -+ -+/* -+ * Register offsets, note sunxi musb has a different layout then most -+ * musb implementations, we translate the layout in musb_readb & friends. -+ */ -+#define SUNXI_MUSB_POWER 0x0040 -+#define SUNXI_MUSB_DEVCTL 0x0041 -+#define SUNXI_MUSB_INDEX 0x0042 -+#define SUNXI_MUSB_VEND0 0x0043 -+#define SUNXI_MUSB_INTRTX 0x0044 -+#define SUNXI_MUSB_INTRRX 0x0046 -+#define SUNXI_MUSB_INTRTXE 0x0048 -+#define SUNXI_MUSB_INTRRXE 0x004a -+#define SUNXI_MUSB_INTRUSB 0x004c -+#define SUNXI_MUSB_INTRUSBE 0x0050 -+#define SUNXI_MUSB_FRAME 0x0054 -+#define SUNXI_MUSB_TXFIFOSZ 0x0090 -+#define SUNXI_MUSB_TXFIFOADD 0x0092 -+#define SUNXI_MUSB_RXFIFOSZ 0x0094 -+#define SUNXI_MUSB_RXFIFOADD 0x0096 -+#define SUNXI_MUSB_FADDR 0x0098 -+#define SUNXI_MUSB_TXFUNCADDR 0x0098 -+#define SUNXI_MUSB_TXHUBADDR 0x009a -+#define SUNXI_MUSB_TXHUBPORT 0x009b -+#define SUNXI_MUSB_RXFUNCADDR 0x009c -+#define SUNXI_MUSB_RXHUBADDR 0x009e -+#define SUNXI_MUSB_RXHUBPORT 0x009f -+#define SUNXI_MUSB_CONFIGDATA 0x00c0 -+ -+/* VEND0 bits */ -+#define SUNXI_MUSB_VEND0_PIO_MODE 0 -+ -+/* flags */ -+#define SUNXI_MUSB_FL_ENABLED 0 -+#define SUNXI_MUSB_FL_HOSTMODE 1 -+#define SUNXI_MUSB_FL_HOSTMODE_PEND 2 -+#define SUNXI_MUSB_FL_VBUS_ON 3 -+#define SUNXI_MUSB_FL_PHY_ON 4 -+ -+/* Our read/write methods need access and do not get passed in a musb ref :| */ -+static struct musb *sunxi_musb; -+ -+struct sunxi_glue { -+ struct device *dev; -+ struct platform_device *musb; -+ struct clk *clk; -+ struct phy *phy; -+ struct platform_device *usb_phy; -+ struct usb_phy *xceiv; -+ unsigned long flags; -+ struct work_struct work; -+ struct extcon_dev *extcon; -+ struct notifier_block host_nb; -+}; -+ -+/* phy_power_on / off may sleep, so we use a workqueue */ -+static void sunxi_musb_work(struct work_struct *work) -+{ -+ struct sunxi_glue *glue = container_of(work, struct sunxi_glue, work); -+ bool vbus_on, phy_on; -+ -+ if (!test_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags)) -+ return; -+ -+ if (test_and_clear_bit(SUNXI_MUSB_FL_HOSTMODE_PEND, &glue->flags)) { -+ struct musb *musb = platform_get_drvdata(glue->musb); -+ unsigned long flags; -+ u8 devctl; -+ -+ spin_lock_irqsave(&musb->lock, flags); -+ -+ devctl = readb(musb->mregs + SUNXI_MUSB_DEVCTL); -+ if (test_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags)) { -+ set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); -+ musb->xceiv->otg->default_a = 1; -+ musb->xceiv->otg->state = OTG_STATE_A_IDLE; -+ MUSB_HST_MODE(musb); -+ devctl |= MUSB_DEVCTL_SESSION; -+ } else { -+ clear_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); -+ musb->xceiv->otg->default_a = 0; -+ musb->xceiv->otg->state = OTG_STATE_B_IDLE; -+ MUSB_DEV_MODE(musb); -+ devctl &= ~MUSB_DEVCTL_SESSION; -+ } -+ writeb(devctl, musb->mregs + SUNXI_MUSB_DEVCTL); -+ -+ spin_unlock_irqrestore(&musb->lock, flags); -+ } -+ -+ vbus_on = test_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); -+ phy_on = test_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); -+ -+ if (phy_on != vbus_on) { -+ if (vbus_on) { -+ phy_power_on(glue->phy); -+ set_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); -+ } else { -+ phy_power_off(glue->phy); -+ clear_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); -+ } -+ } -+} -+ -+static void sunxi_musb_set_vbus(struct musb *musb, int is_on) -+{ -+ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); -+ -+ if (is_on) -+ set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); -+ else -+ clear_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); -+ -+ schedule_work(&glue->work); -+} -+ -+static void sunxi_musb_pre_root_reset_end(struct musb *musb) -+{ -+ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); -+ -+ sun4i_usb_phy_set_squelch_detect(glue->phy, false); -+} -+ -+static void sunxi_musb_post_root_reset_end(struct musb *musb) -+{ -+ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); -+ -+ sun4i_usb_phy_set_squelch_detect(glue->phy, true); -+} -+ -+static irqreturn_t sunxi_musb_interrupt(int irq, void *__hci) -+{ -+ struct musb *musb = __hci; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&musb->lock, flags); -+ -+ musb->int_usb = readb(musb->mregs + SUNXI_MUSB_INTRUSB); -+ if (musb->int_usb) -+ writeb(musb->int_usb, musb->mregs + SUNXI_MUSB_INTRUSB); -+ -+ /* -+ * sunxi musb often signals babble on low / full speed device -+ * disconnect, without ever raising MUSB_INTR_DISCONNECT, since -+ * normally babble never happens treat it as disconnect. -+ */ -+ if ((musb->int_usb & MUSB_INTR_BABBLE) && is_host_active(musb)) { -+ musb->int_usb &= ~MUSB_INTR_BABBLE; -+ musb->int_usb |= MUSB_INTR_DISCONNECT; -+ } -+ -+ if ((musb->int_usb & MUSB_INTR_RESET) && !is_host_active(musb)) { -+ /* ep0 FADDR must be 0 when (re)entering peripheral mode */ -+ musb_ep_select(musb->mregs, 0); -+ musb_writeb(musb->mregs, MUSB_FADDR, 0); -+ } -+ -+ musb->int_tx = readw(musb->mregs + SUNXI_MUSB_INTRTX); -+ if (musb->int_tx) -+ writew(musb->int_tx, musb->mregs + SUNXI_MUSB_INTRTX); -+ -+ musb->int_rx = readw(musb->mregs + SUNXI_MUSB_INTRRX); -+ if (musb->int_rx) -+ writew(musb->int_rx, musb->mregs + SUNXI_MUSB_INTRRX); -+ -+ musb_interrupt(musb); -+ -+ spin_unlock_irqrestore(&musb->lock, flags); -+ -+ return IRQ_HANDLED; -+} -+ -+static int sunxi_musb_host_notifier(struct notifier_block *nb, -+ unsigned long event, void *ptr) -+{ -+ struct sunxi_glue *glue = container_of(nb, struct sunxi_glue, host_nb); -+ -+ if (event) -+ set_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags); -+ else -+ clear_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags); -+ -+ set_bit(SUNXI_MUSB_FL_HOSTMODE_PEND, &glue->flags); -+ schedule_work(&glue->work); -+ -+ return NOTIFY_DONE; -+} -+ -+static int sunxi_musb_init(struct musb *musb) -+{ -+ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); -+ int ret; -+ -+ sunxi_musb = musb; -+ musb->phy = glue->phy; -+ musb->xceiv = glue->xceiv; -+ -+ ret = sunxi_sram_claim(musb->controller->parent); -+ if (ret) -+ return ret; -+ -+ ret = clk_prepare_enable(glue->clk); -+ if (ret) -+ goto error_sram_release; -+ -+ writeb(SUNXI_MUSB_VEND0_PIO_MODE, musb->mregs + SUNXI_MUSB_VEND0); -+ -+ /* Register notifier before calling phy_init() */ -+ if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) { -+ ret = extcon_register_notifier(glue->extcon, EXTCON_USB_HOST, -+ &glue->host_nb); -+ if (ret) -+ goto error_clk_disable; -+ } -+ -+ ret = phy_init(glue->phy); -+ if (ret) -+ goto error_unregister_notifier; -+ -+ if (musb->port_mode == MUSB_PORT_MODE_HOST) { -+ ret = phy_power_on(glue->phy); -+ if (ret) -+ goto error_phy_exit; -+ set_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); -+ /* Stop musb work from turning vbus off again */ -+ set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); -+ } -+ -+ musb->isr = sunxi_musb_interrupt; -+ -+ /* Stop the musb-core from doing runtime pm (not supported on sunxi) */ -+ pm_runtime_get(musb->controller); -+ -+ return 0; -+ -+error_phy_exit: -+ phy_exit(glue->phy); -+error_unregister_notifier: -+ if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) -+ extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST, -+ &glue->host_nb); -+error_clk_disable: -+ clk_disable_unprepare(glue->clk); -+error_sram_release: -+ sunxi_sram_release(musb->controller->parent); -+ return ret; -+} -+ -+static int sunxi_musb_exit(struct musb *musb) -+{ -+ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); -+ -+ pm_runtime_put(musb->controller); -+ -+ cancel_work_sync(&glue->work); -+ if (test_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags)) -+ phy_power_off(glue->phy); -+ -+ phy_exit(glue->phy); -+ -+ if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) -+ extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST, -+ &glue->host_nb); -+ -+ clk_disable_unprepare(glue->clk); -+ sunxi_sram_release(musb->controller->parent); -+ -+ return 0; -+} -+ -+static void sunxi_musb_enable(struct musb *musb) -+{ -+ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); -+ -+ /* musb_core does not call us in a balanced manner */ -+ if (test_and_set_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags)) -+ return; -+ -+ schedule_work(&glue->work); -+} -+ -+static void sunxi_musb_disable(struct musb *musb) -+{ -+ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); -+ -+ clear_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags); -+} -+ -+/* -+ * sunxi musb register layout -+ * 0x00 - 0x17 fifo regs, 1 long per fifo -+ * 0x40 - 0x57 generic control regs (power - frame) -+ * 0x80 - 0x8f ep control regs (addressed through hw_ep->regs, indexed) -+ * 0x90 - 0x97 fifo control regs (indexed) -+ * 0x98 - 0x9f multipoint / busctl regs (indexed) -+ * 0xc0 configdata reg -+ */ -+ -+static u32 sunxi_musb_fifo_offset(u8 epnum) -+{ -+ return (epnum * 4); -+} -+ -+static u32 sunxi_musb_ep_offset(u8 epnum, u16 offset) -+{ -+ WARN_ONCE(offset != 0, -+ "sunxi_musb_ep_offset called with non 0 offset\n"); -+ -+ return 0x80; /* indexed, so ignore epnum */ -+} -+ -+static u32 sunxi_musb_busctl_offset(u8 epnum, u16 offset) -+{ -+ return SUNXI_MUSB_TXFUNCADDR + offset; -+} -+ -+static u8 sunxi_musb_readb(const void __iomem *addr, unsigned offset) -+{ -+ if (addr == sunxi_musb->mregs) { -+ /* generic control or fifo control reg access */ -+ switch (offset) { -+ case MUSB_FADDR: -+ return readb(addr + SUNXI_MUSB_FADDR); -+ case MUSB_POWER: -+ return readb(addr + SUNXI_MUSB_POWER); -+ case MUSB_INTRUSB: -+ return readb(addr + SUNXI_MUSB_INTRUSB); -+ case MUSB_INTRUSBE: -+ return readb(addr + SUNXI_MUSB_INTRUSBE); -+ case MUSB_INDEX: -+ return readb(addr + SUNXI_MUSB_INDEX); -+ case MUSB_TESTMODE: -+ return 0; /* No testmode on sunxi */ -+ case MUSB_DEVCTL: -+ return readb(addr + SUNXI_MUSB_DEVCTL); -+ case MUSB_TXFIFOSZ: -+ return readb(addr + SUNXI_MUSB_TXFIFOSZ); -+ case MUSB_RXFIFOSZ: -+ return readb(addr + SUNXI_MUSB_RXFIFOSZ); -+ case MUSB_CONFIGDATA + 0x10: /* See musb_read_configdata() */ -+ return readb(addr + SUNXI_MUSB_CONFIGDATA); -+ /* Offset for these is fixed by sunxi_musb_busctl_offset() */ -+ case SUNXI_MUSB_TXFUNCADDR: -+ case SUNXI_MUSB_TXHUBADDR: -+ case SUNXI_MUSB_TXHUBPORT: -+ case SUNXI_MUSB_RXFUNCADDR: -+ case SUNXI_MUSB_RXHUBADDR: -+ case SUNXI_MUSB_RXHUBPORT: -+ /* multipoint / busctl reg access */ -+ return readb(addr + offset); -+ default: -+ dev_err(sunxi_musb->controller->parent, -+ "Error unknown readb offset %u\n", offset); -+ return 0; -+ } -+ } else if (addr == (sunxi_musb->mregs + 0x80)) { -+ /* ep control reg access */ -+ /* sunxi has a 2 byte hole before the txtype register */ -+ if (offset >= MUSB_TXTYPE) -+ offset += 2; -+ return readb(addr + offset); -+ } -+ -+ dev_err(sunxi_musb->controller->parent, -+ "Error unknown readb at 0x%x bytes offset\n", -+ (int)(addr - sunxi_musb->mregs)); -+ return 0; -+} -+ -+static void sunxi_musb_writeb(void __iomem *addr, unsigned offset, u8 data) -+{ -+ if (addr == sunxi_musb->mregs) { -+ /* generic control or fifo control reg access */ -+ switch (offset) { -+ case MUSB_FADDR: -+ return writeb(data, addr + SUNXI_MUSB_FADDR); -+ case MUSB_POWER: -+ return writeb(data, addr + SUNXI_MUSB_POWER); -+ case MUSB_INTRUSB: -+ return writeb(data, addr + SUNXI_MUSB_INTRUSB); -+ case MUSB_INTRUSBE: -+ return writeb(data, addr + SUNXI_MUSB_INTRUSBE); -+ case MUSB_INDEX: -+ return writeb(data, addr + SUNXI_MUSB_INDEX); -+ case MUSB_TESTMODE: -+ if (data) -+ dev_warn(sunxi_musb->controller->parent, -+ "sunxi-musb does not have testmode\n"); -+ return; -+ case MUSB_DEVCTL: -+ return writeb(data, addr + SUNXI_MUSB_DEVCTL); -+ case MUSB_TXFIFOSZ: -+ return writeb(data, addr + SUNXI_MUSB_TXFIFOSZ); -+ case MUSB_RXFIFOSZ: -+ return writeb(data, addr + SUNXI_MUSB_RXFIFOSZ); -+ /* Offset for these is fixed by sunxi_musb_busctl_offset() */ -+ case SUNXI_MUSB_TXFUNCADDR: -+ case SUNXI_MUSB_TXHUBADDR: -+ case SUNXI_MUSB_TXHUBPORT: -+ case SUNXI_MUSB_RXFUNCADDR: -+ case SUNXI_MUSB_RXHUBADDR: -+ case SUNXI_MUSB_RXHUBPORT: -+ /* multipoint / busctl reg access */ -+ return writeb(data, addr + offset); -+ default: -+ dev_err(sunxi_musb->controller->parent, -+ "Error unknown writeb offset %u\n", offset); -+ return; -+ } -+ } else if (addr == (sunxi_musb->mregs + 0x80)) { -+ /* ep control reg access */ -+ if (offset >= MUSB_TXTYPE) -+ offset += 2; -+ return writeb(data, addr + offset); -+ } -+ -+ dev_err(sunxi_musb->controller->parent, -+ "Error unknown writeb at 0x%x bytes offset\n", -+ (int)(addr - sunxi_musb->mregs)); -+} -+ -+static u16 sunxi_musb_readw(const void __iomem *addr, unsigned offset) -+{ -+ if (addr == sunxi_musb->mregs) { -+ /* generic control or fifo control reg access */ -+ switch (offset) { -+ case MUSB_INTRTX: -+ return readw(addr + SUNXI_MUSB_INTRTX); -+ case MUSB_INTRRX: -+ return readw(addr + SUNXI_MUSB_INTRRX); -+ case MUSB_INTRTXE: -+ return readw(addr + SUNXI_MUSB_INTRTXE); -+ case MUSB_INTRRXE: -+ return readw(addr + SUNXI_MUSB_INTRRXE); -+ case MUSB_FRAME: -+ return readw(addr + SUNXI_MUSB_FRAME); -+ case MUSB_TXFIFOADD: -+ return readw(addr + SUNXI_MUSB_TXFIFOADD); -+ case MUSB_RXFIFOADD: -+ return readw(addr + SUNXI_MUSB_RXFIFOADD); -+ case MUSB_HWVERS: -+ return 0; /* sunxi musb version is not known */ -+ default: -+ dev_err(sunxi_musb->controller->parent, -+ "Error unknown readw offset %u\n", offset); -+ return 0; -+ } -+ } else if (addr == (sunxi_musb->mregs + 0x80)) { -+ /* ep control reg access */ -+ return readw(addr + offset); -+ } -+ -+ dev_err(sunxi_musb->controller->parent, -+ "Error unknown readw at 0x%x bytes offset\n", -+ (int)(addr - sunxi_musb->mregs)); -+ return 0; -+} -+ -+static void sunxi_musb_writew(void __iomem *addr, unsigned offset, u16 data) -+{ -+ if (addr == sunxi_musb->mregs) { -+ /* generic control or fifo control reg access */ -+ switch (offset) { -+ case MUSB_INTRTX: -+ return writew(data, addr + SUNXI_MUSB_INTRTX); -+ case MUSB_INTRRX: -+ return writew(data, addr + SUNXI_MUSB_INTRRX); -+ case MUSB_INTRTXE: -+ return writew(data, addr + SUNXI_MUSB_INTRTXE); -+ case MUSB_INTRRXE: -+ return writew(data, addr + SUNXI_MUSB_INTRRXE); -+ case MUSB_FRAME: -+ return writew(data, addr + SUNXI_MUSB_FRAME); -+ case MUSB_TXFIFOADD: -+ return writew(data, addr + SUNXI_MUSB_TXFIFOADD); -+ case MUSB_RXFIFOADD: -+ return writew(data, addr + SUNXI_MUSB_RXFIFOADD); -+ default: -+ dev_err(sunxi_musb->controller->parent, -+ "Error unknown writew offset %u\n", offset); -+ return; -+ } -+ } else if (addr == (sunxi_musb->mregs + 0x80)) { -+ /* ep control reg access */ -+ return writew(data, addr + offset); -+ } -+ -+ dev_err(sunxi_musb->controller->parent, -+ "Error unknown writew at 0x%x bytes offset\n", -+ (int)(addr - sunxi_musb->mregs)); -+} -+ -+static const struct musb_platform_ops sunxi_musb_ops = { -+ .quirks = MUSB_INDEXED_EP, -+ .init = sunxi_musb_init, -+ .exit = sunxi_musb_exit, -+ .enable = sunxi_musb_enable, -+ .disable = sunxi_musb_disable, -+ .fifo_offset = sunxi_musb_fifo_offset, -+ .ep_offset = sunxi_musb_ep_offset, -+ .busctl_offset = sunxi_musb_busctl_offset, -+ .readb = sunxi_musb_readb, -+ .writeb = sunxi_musb_writeb, -+ .readw = sunxi_musb_readw, -+ .writew = sunxi_musb_writew, -+ .set_vbus = sunxi_musb_set_vbus, -+ .pre_root_reset_end = sunxi_musb_pre_root_reset_end, -+ .post_root_reset_end = sunxi_musb_post_root_reset_end, -+}; -+ -+/* Allwinner OTG supports up to 5 endpoints */ -+#define SUNXI_MUSB_MAX_EP_NUM 6 -+#define SUNXI_MUSB_RAM_BITS 11 -+ -+static struct musb_fifo_cfg sunxi_musb_mode_cfg[] = { -+ MUSB_EP_FIFO_SINGLE(1, FIFO_TX, 512), -+ MUSB_EP_FIFO_SINGLE(1, FIFO_RX, 512), -+ MUSB_EP_FIFO_SINGLE(2, FIFO_TX, 512), -+ MUSB_EP_FIFO_SINGLE(2, FIFO_RX, 512), -+ MUSB_EP_FIFO_SINGLE(3, FIFO_TX, 512), -+ MUSB_EP_FIFO_SINGLE(3, FIFO_RX, 512), -+ MUSB_EP_FIFO_SINGLE(4, FIFO_TX, 512), -+ MUSB_EP_FIFO_SINGLE(4, FIFO_RX, 512), -+ MUSB_EP_FIFO_SINGLE(5, FIFO_TX, 512), -+ MUSB_EP_FIFO_SINGLE(5, FIFO_RX, 512), -+}; -+ -+static struct musb_hdrc_config sunxi_musb_hdrc_config = { -+ .fifo_cfg = sunxi_musb_mode_cfg, -+ .fifo_cfg_size = ARRAY_SIZE(sunxi_musb_mode_cfg), -+ .multipoint = true, -+ .dyn_fifo = true, -+ .soft_con = true, -+ .num_eps = SUNXI_MUSB_MAX_EP_NUM, -+ .ram_bits = SUNXI_MUSB_RAM_BITS, -+ .dma = 0, -+}; -+ -+static int sunxi_musb_probe(struct platform_device *pdev) -+{ -+ struct musb_hdrc_platform_data pdata; -+ struct platform_device_info pinfo; -+ struct sunxi_glue *glue; -+ struct device_node *np = pdev->dev.of_node; -+ int ret; -+ -+ if (!np) { -+ dev_err(&pdev->dev, "Error no device tree node found\n"); -+ return -EINVAL; -+ } -+ -+ glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); -+ if (!glue) -+ return -ENOMEM; -+ -+ memset(&pdata, 0, sizeof(pdata)); -+ switch (of_usb_get_dr_mode(np)) { -+#if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_HOST -+ case USB_DR_MODE_HOST: -+ pdata.mode = MUSB_PORT_MODE_HOST; -+ break; -+#endif -+#ifdef CONFIG_USB_MUSB_DUAL_ROLE -+ case USB_DR_MODE_OTG: -+ glue->extcon = extcon_get_edev_by_phandle(&pdev->dev, 0); -+ if (IS_ERR(glue->extcon)) { -+ if (PTR_ERR(glue->extcon) == -EPROBE_DEFER) -+ return -EPROBE_DEFER; -+ dev_err(&pdev->dev, "Invalid or missing extcon\n"); -+ return PTR_ERR(glue->extcon); -+ } -+ pdata.mode = MUSB_PORT_MODE_DUAL_ROLE; -+ break; -+#endif -+ default: -+ dev_err(&pdev->dev, "Invalid or missing 'dr_mode' property\n"); -+ return -EINVAL; -+ } -+ pdata.platform_ops = &sunxi_musb_ops; -+ pdata.config = &sunxi_musb_hdrc_config; -+ -+ glue->dev = &pdev->dev; -+ INIT_WORK(&glue->work, sunxi_musb_work); -+ glue->host_nb.notifier_call = sunxi_musb_host_notifier; -+ -+ glue->clk = devm_clk_get(&pdev->dev, NULL); -+ if (IS_ERR(glue->clk)) { -+ dev_err(&pdev->dev, "Error getting clock: %ld\n", -+ PTR_ERR(glue->clk)); -+ return PTR_ERR(glue->clk); -+ } -+ -+ glue->phy = devm_phy_get(&pdev->dev, "usb"); -+ if (IS_ERR(glue->phy)) { -+ if (PTR_ERR(glue->phy) == -EPROBE_DEFER) -+ return -EPROBE_DEFER; -+ dev_err(&pdev->dev, "Error getting phy %ld\n", -+ PTR_ERR(glue->phy)); -+ return PTR_ERR(glue->phy); -+ } -+ -+ glue->usb_phy = usb_phy_generic_register(); -+ if (IS_ERR(glue->usb_phy)) { -+ dev_err(&pdev->dev, "Error registering usb-phy %ld\n", -+ PTR_ERR(glue->usb_phy)); -+ return PTR_ERR(glue->usb_phy); -+ } -+ -+ glue->xceiv = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); -+ if (IS_ERR(glue->xceiv)) { -+ ret = PTR_ERR(glue->xceiv); -+ dev_err(&pdev->dev, "Error getting usb-phy %d\n", ret); -+ goto err_unregister_usb_phy; -+ } -+ -+ platform_set_drvdata(pdev, glue); -+ -+ memset(&pinfo, 0, sizeof(pinfo)); -+ pinfo.name = "musb-hdrc"; -+ pinfo.id = PLATFORM_DEVID_AUTO; -+ pinfo.parent = &pdev->dev; -+ pinfo.res = pdev->resource; -+ pinfo.num_res = pdev->num_resources; -+ pinfo.data = &pdata; -+ pinfo.size_data = sizeof(pdata); -+ -+ glue->musb = platform_device_register_full(&pinfo); -+ if (IS_ERR(glue->musb)) { -+ ret = PTR_ERR(glue->musb); -+ dev_err(&pdev->dev, "Error registering musb dev: %d\n", ret); -+ goto err_unregister_usb_phy; -+ } -+ -+ return 0; -+ -+err_unregister_usb_phy: -+ usb_phy_generic_unregister(glue->usb_phy); -+ return ret; -+} -+ -+static int sunxi_musb_remove(struct platform_device *pdev) -+{ -+ struct sunxi_glue *glue = platform_get_drvdata(pdev); -+ struct platform_device *usb_phy = glue->usb_phy; -+ -+ platform_device_unregister(glue->musb); /* Frees glue ! */ -+ usb_phy_generic_unregister(usb_phy); -+ -+ return 0; -+} -+ -+static const struct of_device_id sunxi_musb_match[] = { -+ { .compatible = "allwinner,sun4i-a10-musb", }, -+ {} -+}; -+ -+static struct platform_driver sunxi_musb_driver = { -+ .probe = sunxi_musb_probe, -+ .remove = sunxi_musb_remove, -+ .driver = { -+ .name = "musb-sunxi", -+ .of_match_table = sunxi_musb_match, -+ }, -+}; -+module_platform_driver(sunxi_musb_driver); -+ -+MODULE_DESCRIPTION("Allwinner sunxi MUSB Glue Layer"); -+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/sunxi/patches-4.1/171-musb-add-support-for-a31.patch b/target/linux/sunxi/patches-4.1/171-musb-add-support-for-a31.patch deleted file mode 100644 index af958f2..0000000 --- a/target/linux/sunxi/patches-4.1/171-musb-add-support-for-a31.patch +++ /dev/null @@ -1,162 +0,0 @@ -From 132e23775779cc895c37f7883c33a60a1a8a7cdd Mon Sep 17 00:00:00 2001 -From: Hans de Goede <hdegoede@redhat.com> -Date: Wed, 8 Jul 2015 16:41:39 +0200 -Subject: [PATCH] usb: musb: sunxi: Add support for musb controller in A31 SoC - -The A31 SoC uses the same musb controller as found in earlier SoCs, but it -is hooked up slightly different. Its SRAM is private and no longer controlled -through the SRAM controller, and its reset is controlled via a separate -reset controller. This commit adds support for this setup. - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> -Signed-off-by: Felipe Balbi <balbi@ti.com> ---- - .../bindings/usb/allwinner,sun4i-a10-musb.txt | 3 +- - drivers/usb/musb/sunxi.c | 50 +++++++++++++++++++--- - 2 files changed, 46 insertions(+), 7 deletions(-) - ---- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt -+++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt -@@ -2,9 +2,10 @@ Allwinner sun4i A10 musb DRC/OTG control - ------------------------------------------- - - Required properties: -- - compatible : "allwinner,sun4i-a10-musb" -+ - compatible : "allwinner,sun4i-a10-musb" or "allwinner,sun6i-a31-musb" - - reg : mmio address range of the musb controller - - clocks : clock specifier for the musb controller ahb gate clock -+ - reset : reset specifier for the ahb reset (A31 and newer only) - - interrupts : interrupt to which the musb controller is connected - - interrupt-names : must be "mc" - - phys : phy specifier for the otg phy ---- a/drivers/usb/musb/sunxi.c -+++ b/drivers/usb/musb/sunxi.c -@@ -26,6 +26,7 @@ - #include <linux/of.h> - #include <linux/phy/phy-sun4i-usb.h> - #include <linux/platform_device.h> -+#include <linux/reset.h> - #include <linux/soc/sunxi/sunxi_sram.h> - #include <linux/usb/musb.h> - #include <linux/usb/of.h> -@@ -70,6 +71,8 @@ - #define SUNXI_MUSB_FL_HOSTMODE_PEND 2 - #define SUNXI_MUSB_FL_VBUS_ON 3 - #define SUNXI_MUSB_FL_PHY_ON 4 -+#define SUNXI_MUSB_FL_HAS_SRAM 5 -+#define SUNXI_MUSB_FL_HAS_RESET 6 - - /* Our read/write methods need access and do not get passed in a musb ref :| */ - static struct musb *sunxi_musb; -@@ -78,6 +81,7 @@ struct sunxi_glue { - struct device *dev; - struct platform_device *musb; - struct clk *clk; -+ struct reset_control *rst; - struct phy *phy; - struct platform_device *usb_phy; - struct usb_phy *xceiv; -@@ -229,14 +233,22 @@ static int sunxi_musb_init(struct musb * - musb->phy = glue->phy; - musb->xceiv = glue->xceiv; - -- ret = sunxi_sram_claim(musb->controller->parent); -- if (ret) -- return ret; -+ if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags)) { -+ ret = sunxi_sram_claim(musb->controller->parent); -+ if (ret) -+ return ret; -+ } - - ret = clk_prepare_enable(glue->clk); - if (ret) - goto error_sram_release; - -+ if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) { -+ ret = reset_control_deassert(glue->rst); -+ if (ret) -+ goto error_clk_disable; -+ } -+ - writeb(SUNXI_MUSB_VEND0_PIO_MODE, musb->mregs + SUNXI_MUSB_VEND0); - - /* Register notifier before calling phy_init() */ -@@ -244,7 +256,7 @@ static int sunxi_musb_init(struct musb * - ret = extcon_register_notifier(glue->extcon, EXTCON_USB_HOST, - &glue->host_nb); - if (ret) -- goto error_clk_disable; -+ goto error_reset_assert; - } - - ret = phy_init(glue->phy); -@@ -273,10 +285,14 @@ error_unregister_notifier: - if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) - extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST, - &glue->host_nb); -+error_reset_assert: -+ if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) -+ reset_control_assert(glue->rst); - error_clk_disable: - clk_disable_unprepare(glue->clk); - error_sram_release: -- sunxi_sram_release(musb->controller->parent); -+ if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags)) -+ sunxi_sram_release(musb->controller->parent); - return ret; - } - -@@ -296,8 +312,12 @@ static int sunxi_musb_exit(struct musb * - extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST, - &glue->host_nb); - -+ if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) -+ reset_control_assert(glue->rst); -+ - clk_disable_unprepare(glue->clk); -- sunxi_sram_release(musb->controller->parent); -+ if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags)) -+ sunxi_sram_release(musb->controller->parent); - - return 0; - } -@@ -617,6 +637,12 @@ static int sunxi_musb_probe(struct platf - INIT_WORK(&glue->work, sunxi_musb_work); - glue->host_nb.notifier_call = sunxi_musb_host_notifier; - -+ if (of_device_is_compatible(np, "allwinner,sun4i-a10-musb")) -+ set_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags); -+ -+ if (of_device_is_compatible(np, "allwinner,sun6i-a31-musb")) -+ set_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags); -+ - glue->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(glue->clk)) { - dev_err(&pdev->dev, "Error getting clock: %ld\n", -@@ -624,6 +650,17 @@ static int sunxi_musb_probe(struct platf - return PTR_ERR(glue->clk); - } - -+ if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) { -+ glue->rst = devm_reset_control_get(&pdev->dev, NULL); -+ if (IS_ERR(glue->rst)) { -+ if (PTR_ERR(glue->rst) == -EPROBE_DEFER) -+ return -EPROBE_DEFER; -+ dev_err(&pdev->dev, "Error getting reset %ld\n", -+ PTR_ERR(glue->rst)); -+ return PTR_ERR(glue->rst); -+ } -+ } -+ - glue->phy = devm_phy_get(&pdev->dev, "usb"); - if (IS_ERR(glue->phy)) { - if (PTR_ERR(glue->phy) == -EPROBE_DEFER) -@@ -685,6 +722,7 @@ static int sunxi_musb_remove(struct plat - - static const struct of_device_id sunxi_musb_match[] = { - { .compatible = "allwinner,sun4i-a10-musb", }, -+ { .compatible = "allwinner,sun6i-a31-musb", }, - {} - }; - diff --git a/target/linux/sunxi/patches-4.1/190-dt-sun7i-add-ss-to-a20.patch b/target/linux/sunxi/patches-4.1/190-dt-sun7i-add-ss-to-a20.patch deleted file mode 100644 index 5ce12f3..0000000 --- a/target/linux/sunxi/patches-4.1/190-dt-sun7i-add-ss-to-a20.patch +++ /dev/null @@ -1,17 +0,0 @@ ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -745,6 +745,14 @@ - status = "disabled"; - }; - -+ crypto: crypto-engine@01c15000 { -+ compatible = "allwinner,sun7i-a20-crypto"; -+ reg = <0x01c15000 0x1000>; -+ interrupts = <0 86 4>; -+ clocks = <&ahb_gates 5>, <&ss_clk>; -+ clock-names = "ahb", "mod"; -+ }; -+ - spi2: spi@01c17000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c17000 0x1000>; diff --git a/target/linux/sunxi/patches-4.1/191-dt-sun4i-add-ss-to-a10.patch b/target/linux/sunxi/patches-4.1/191-dt-sun4i-add-ss-to-a10.patch deleted file mode 100644 index ab1879d..0000000 --- a/target/linux/sunxi/patches-4.1/191-dt-sun4i-add-ss-to-a10.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 56ba8c5814a859dd94667643a3bc22984efd1521 Mon Sep 17 00:00:00 2001 -From: LABBE Corentin <clabbe.montjoie@gmail.com> -Date: Fri, 17 Jul 2015 16:39:38 +0200 -Subject: [PATCH] ARM: sun4i: dt: Add Security System to A10 SoC DTS - -The Security System is a hardware cryptographic accelerator that support -AES/MD5/SHA1/DES/3DES/PRNG algorithms. -It could be found on many Allwinner SoC. - -This patch enable the Security System on the Allwinner A10 SoC Device-tree. - -Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> -Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -591,6 +591,14 @@ - status = "disabled"; - }; - -+ crypto: crypto-engine@01c15000 { -+ compatible = "allwinner,sun4i-a10-crypto"; -+ reg = <0x01c15000 0x1000>; -+ interrupts = <86>; -+ clocks = <&ahb_gates 5>, <&ss_clk>; -+ clock-names = "ahb", "mod"; -+ }; -+ - spi2: spi@01c17000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c17000 0x1000>; diff --git a/target/linux/sunxi/patches-4.1/192-crypto-add-ss.patch b/target/linux/sunxi/patches-4.1/192-crypto-add-ss.patch deleted file mode 100644 index 1b66c97..0000000 --- a/target/linux/sunxi/patches-4.1/192-crypto-add-ss.patch +++ /dev/null @@ -1,1713 +0,0 @@ -From 6298e948215f2a3eb8a9af5c490d025deb66f179 Mon Sep 17 00:00:00 2001 -From: LABBE Corentin <clabbe.montjoie@gmail.com> -Date: Fri, 17 Jul 2015 16:39:41 +0200 -Subject: [PATCH] crypto: sunxi-ss - Add Allwinner Security System crypto - accelerator - -Add support for the Security System included in Allwinner SoC A20. -The Security System is a hardware cryptographic accelerator that support: -- MD5 and SHA1 hash algorithms -- AES block cipher in CBC/ECB mode with 128/196/256bits keys. -- DES and 3DES block cipher in CBC/ECB mode - -Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> -Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> ---- - drivers/crypto/Kconfig | 17 + - drivers/crypto/Makefile | 1 + - drivers/crypto/sunxi-ss/Makefile | 2 + - drivers/crypto/sunxi-ss/sun4i-ss-cipher.c | 542 ++++++++++++++++++++++++++++++ - drivers/crypto/sunxi-ss/sun4i-ss-core.c | 403 ++++++++++++++++++++++ - drivers/crypto/sunxi-ss/sun4i-ss-hash.c | 492 +++++++++++++++++++++++++++ - drivers/crypto/sunxi-ss/sun4i-ss.h | 199 +++++++++++ - 7 files changed, 1656 insertions(+) - create mode 100644 drivers/crypto/sunxi-ss/Makefile - create mode 100644 drivers/crypto/sunxi-ss/sun4i-ss-cipher.c - create mode 100644 drivers/crypto/sunxi-ss/sun4i-ss-core.c - create mode 100644 drivers/crypto/sunxi-ss/sun4i-ss-hash.c - create mode 100644 drivers/crypto/sunxi-ss/sun4i-ss.h - ---- a/drivers/crypto/Kconfig -+++ b/drivers/crypto/Kconfig -@@ -460,4 +460,21 @@ config CRYPTO_DEV_IMGTEC_HASH - hardware hash accelerator. Supporting MD5/SHA1/SHA224/SHA256 - hashing algorithms. - -+config CRYPTO_DEV_SUN4I_SS -+ tristate "Support for Allwinner Security System cryptographic accelerator" -+ depends on ARCH_SUNXI -+ select CRYPTO_MD5 -+ select CRYPTO_SHA1 -+ select CRYPTO_AES -+ select CRYPTO_DES -+ select CRYPTO_BLKCIPHER -+ help -+ Some Allwinner SoC have a crypto accelerator named -+ Security System. Select this if you want to use it. -+ The Security System handle AES/DES/3DES ciphers in CBC mode -+ and SHA1 and MD5 hash algorithms. -+ -+ To compile this driver as a module, choose M here: the module -+ will be called sun4i-ss. -+ - endif # CRYPTO_HW ---- a/drivers/crypto/Makefile -+++ b/drivers/crypto/Makefile -@@ -27,3 +27,4 @@ obj-$(CONFIG_CRYPTO_DEV_UX500) += ux500/ - obj-$(CONFIG_CRYPTO_DEV_QAT) += qat/ - obj-$(CONFIG_CRYPTO_DEV_QCE) += qce/ - obj-$(CONFIG_CRYPTO_DEV_VMX) += vmx/ -+obj-$(CONFIG_CRYPTO_DEV_SUN4I_SS) += sunxi-ss/ ---- /dev/null -+++ b/drivers/crypto/sunxi-ss/Makefile -@@ -0,0 +1,2 @@ -+obj-$(CONFIG_CRYPTO_DEV_SUN4I_SS) += sun4i-ss.o -+sun4i-ss-y += sun4i-ss-core.o sun4i-ss-hash.o sun4i-ss-cipher.o ---- /dev/null -+++ b/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c -@@ -0,0 +1,542 @@ -+/* -+ * sun4i-ss-cipher.c - hardware cryptographic accelerator for Allwinner A20 SoC -+ * -+ * Copyright (C) 2013-2015 Corentin LABBE <clabbe.montjoie@gmail.com> -+ * -+ * This file add support for AES cipher with 128,192,256 bits -+ * keysize in CBC and ECB mode. -+ * Add support also for DES and 3DES in CBC and ECB mode. -+ * -+ * You could find the datasheet in Documentation/arm/sunxi/README -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+#include "sun4i-ss.h" -+ -+static int sun4i_ss_opti_poll(struct ablkcipher_request *areq) -+{ -+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); -+ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); -+ struct sun4i_ss_ctx *ss = op->ss; -+ unsigned int ivsize = crypto_ablkcipher_ivsize(tfm); -+ struct sun4i_cipher_req_ctx *ctx = ablkcipher_request_ctx(areq); -+ u32 mode = ctx->mode; -+ /* when activating SS, the default FIFO space is SS_RX_DEFAULT(32) */ -+ u32 rx_cnt = SS_RX_DEFAULT; -+ u32 tx_cnt = 0; -+ u32 spaces; -+ u32 v; -+ int i, err = 0; -+ unsigned int ileft = areq->nbytes; -+ unsigned int oleft = areq->nbytes; -+ unsigned int todo; -+ struct sg_mapping_iter mi, mo; -+ unsigned int oi, oo; /* offset for in and out */ -+ -+ if (areq->nbytes == 0) -+ return 0; -+ -+ if (!areq->info) { -+ dev_err_ratelimited(ss->dev, "ERROR: Empty IV\n"); -+ return -EINVAL; -+ } -+ -+ if (!areq->src || !areq->dst) { -+ dev_err_ratelimited(ss->dev, "ERROR: Some SGs are NULL\n"); -+ return -EINVAL; -+ } -+ -+ spin_lock_bh(&ss->slock); -+ -+ for (i = 0; i < op->keylen; i += 4) -+ writel(*(op->key + i / 4), ss->base + SS_KEY0 + i); -+ -+ if (areq->info) { -+ for (i = 0; i < 4 && i < ivsize / 4; i++) { -+ v = *(u32 *)(areq->info + i * 4); -+ writel(v, ss->base + SS_IV0 + i * 4); -+ } -+ } -+ writel(mode, ss->base + SS_CTL); -+ -+ sg_miter_start(&mi, areq->src, sg_nents(areq->src), -+ SG_MITER_FROM_SG | SG_MITER_ATOMIC); -+ sg_miter_start(&mo, areq->dst, sg_nents(areq->dst), -+ SG_MITER_TO_SG | SG_MITER_ATOMIC); -+ sg_miter_next(&mi); -+ sg_miter_next(&mo); -+ if (!mi.addr || !mo.addr) { -+ dev_err_ratelimited(ss->dev, "ERROR: sg_miter return null\n"); -+ err = -EINVAL; -+ goto release_ss; -+ } -+ -+ ileft = areq->nbytes / 4; -+ oleft = areq->nbytes / 4; -+ oi = 0; -+ oo = 0; -+ do { -+ todo = min3(rx_cnt, ileft, (mi.length - oi) / 4); -+ if (todo > 0) { -+ ileft -= todo; -+ writesl(ss->base + SS_RXFIFO, mi.addr + oi, todo); -+ oi += todo * 4; -+ } -+ if (oi == mi.length) { -+ sg_miter_next(&mi); -+ oi = 0; -+ } -+ -+ spaces = readl(ss->base + SS_FCSR); -+ rx_cnt = SS_RXFIFO_SPACES(spaces); -+ tx_cnt = SS_TXFIFO_SPACES(spaces); -+ -+ todo = min3(tx_cnt, oleft, (mo.length - oo) / 4); -+ if (todo > 0) { -+ oleft -= todo; -+ readsl(ss->base + SS_TXFIFO, mo.addr + oo, todo); -+ oo += todo * 4; -+ } -+ if (oo == mo.length) { -+ sg_miter_next(&mo); -+ oo = 0; -+ } -+ } while (mo.length > 0); -+ -+ if (areq->info) { -+ for (i = 0; i < 4 && i < ivsize / 4; i++) { -+ v = readl(ss->base + SS_IV0 + i * 4); -+ *(u32 *)(areq->info + i * 4) = v; -+ } -+ } -+ -+release_ss: -+ sg_miter_stop(&mi); -+ sg_miter_stop(&mo); -+ writel(0, ss->base + SS_CTL); -+ spin_unlock_bh(&ss->slock); -+ return err; -+} -+ -+/* Generic function that support SG with size not multiple of 4 */ -+static int sun4i_ss_cipher_poll(struct ablkcipher_request *areq) -+{ -+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); -+ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); -+ struct sun4i_ss_ctx *ss = op->ss; -+ int no_chunk = 1; -+ struct scatterlist *in_sg = areq->src; -+ struct scatterlist *out_sg = areq->dst; -+ unsigned int ivsize = crypto_ablkcipher_ivsize(tfm); -+ struct sun4i_cipher_req_ctx *ctx = ablkcipher_request_ctx(areq); -+ u32 mode = ctx->mode; -+ /* when activating SS, the default FIFO space is SS_RX_DEFAULT(32) */ -+ u32 rx_cnt = SS_RX_DEFAULT; -+ u32 tx_cnt = 0; -+ u32 v; -+ u32 spaces; -+ int i, err = 0; -+ unsigned int ileft = areq->nbytes; -+ unsigned int oleft = areq->nbytes; -+ unsigned int todo; -+ struct sg_mapping_iter mi, mo; -+ unsigned int oi, oo; /* offset for in and out */ -+ char buf[4 * SS_RX_MAX];/* buffer for linearize SG src */ -+ char bufo[4 * SS_TX_MAX]; /* buffer for linearize SG dst */ -+ unsigned int ob = 0; /* offset in buf */ -+ unsigned int obo = 0; /* offset in bufo*/ -+ unsigned int obl = 0; /* length of data in bufo */ -+ -+ if (areq->nbytes == 0) -+ return 0; -+ -+ if (!areq->info) { -+ dev_err_ratelimited(ss->dev, "ERROR: Empty IV\n"); -+ return -EINVAL; -+ } -+ -+ if (!areq->src || !areq->dst) { -+ dev_err_ratelimited(ss->dev, "ERROR: Some SGs are NULL\n"); -+ return -EINVAL; -+ } -+ -+ /* -+ * if we have only SGs with size multiple of 4, -+ * we can use the SS optimized function -+ */ -+ while (in_sg && no_chunk == 1) { -+ if ((in_sg->length % 4) != 0) -+ no_chunk = 0; -+ in_sg = sg_next(in_sg); -+ } -+ while (out_sg && no_chunk == 1) { -+ if ((out_sg->length % 4) != 0) -+ no_chunk = 0; -+ out_sg = sg_next(out_sg); -+ } -+ -+ if (no_chunk == 1) -+ return sun4i_ss_opti_poll(areq); -+ -+ spin_lock_bh(&ss->slock); -+ -+ for (i = 0; i < op->keylen; i += 4) -+ writel(*(op->key + i / 4), ss->base + SS_KEY0 + i); -+ -+ if (areq->info) { -+ for (i = 0; i < 4 && i < ivsize / 4; i++) { -+ v = *(u32 *)(areq->info + i * 4); -+ writel(v, ss->base + SS_IV0 + i * 4); -+ } -+ } -+ writel(mode, ss->base + SS_CTL); -+ -+ sg_miter_start(&mi, areq->src, sg_nents(areq->src), -+ SG_MITER_FROM_SG | SG_MITER_ATOMIC); -+ sg_miter_start(&mo, areq->dst, sg_nents(areq->dst), -+ SG_MITER_TO_SG | SG_MITER_ATOMIC); -+ sg_miter_next(&mi); -+ sg_miter_next(&mo); -+ if (!mi.addr || !mo.addr) { -+ dev_err_ratelimited(ss->dev, "ERROR: sg_miter return null\n"); -+ err = -EINVAL; -+ goto release_ss; -+ } -+ ileft = areq->nbytes; -+ oleft = areq->nbytes; -+ oi = 0; -+ oo = 0; -+ -+ while (oleft > 0) { -+ if (ileft > 0) { -+ /* -+ * todo is the number of consecutive 4byte word that we -+ * can read from current SG -+ */ -+ todo = min3(rx_cnt, ileft / 4, (mi.length - oi) / 4); -+ if (todo > 0 && ob == 0) { -+ writesl(ss->base + SS_RXFIFO, mi.addr + oi, -+ todo); -+ ileft -= todo * 4; -+ oi += todo * 4; -+ } else { -+ /* -+ * not enough consecutive bytes, so we need to -+ * linearize in buf. todo is in bytes -+ * After that copy, if we have a multiple of 4 -+ * we need to be able to write all buf in one -+ * pass, so it is why we min() with rx_cnt -+ */ -+ todo = min3(rx_cnt * 4 - ob, ileft, -+ mi.length - oi); -+ memcpy(buf + ob, mi.addr + oi, todo); -+ ileft -= todo; -+ oi += todo; -+ ob += todo; -+ if (ob % 4 == 0) { -+ writesl(ss->base + SS_RXFIFO, buf, -+ ob / 4); -+ ob = 0; -+ } -+ } -+ if (oi == mi.length) { -+ sg_miter_next(&mi); -+ oi = 0; -+ } -+ } -+ -+ spaces = readl(ss->base + SS_FCSR); -+ rx_cnt = SS_RXFIFO_SPACES(spaces); -+ tx_cnt = SS_TXFIFO_SPACES(spaces); -+ dev_dbg(ss->dev, "%x %u/%u %u/%u cnt=%u %u/%u %u/%u cnt=%u %u %u\n", -+ mode, -+ oi, mi.length, ileft, areq->nbytes, rx_cnt, -+ oo, mo.length, oleft, areq->nbytes, tx_cnt, -+ todo, ob); -+ -+ if (tx_cnt == 0) -+ continue; -+ /* todo in 4bytes word */ -+ todo = min3(tx_cnt, oleft / 4, (mo.length - oo) / 4); -+ if (todo > 0) { -+ readsl(ss->base + SS_TXFIFO, mo.addr + oo, todo); -+ oleft -= todo * 4; -+ oo += todo * 4; -+ if (oo == mo.length) { -+ sg_miter_next(&mo); -+ oo = 0; -+ } -+ } else { -+ /* -+ * read obl bytes in bufo, we read at maximum for -+ * emptying the device -+ */ -+ readsl(ss->base + SS_TXFIFO, bufo, tx_cnt); -+ obl = tx_cnt * 4; -+ obo = 0; -+ do { -+ /* -+ * how many bytes we can copy ? -+ * no more than remaining SG size -+ * no more than remaining buffer -+ * no need to test against oleft -+ */ -+ todo = min(mo.length - oo, obl - obo); -+ memcpy(mo.addr + oo, bufo + obo, todo); -+ oleft -= todo; -+ obo += todo; -+ oo += todo; -+ if (oo == mo.length) { -+ sg_miter_next(&mo); -+ oo = 0; -+ } -+ } while (obo < obl); -+ /* bufo must be fully used here */ -+ } -+ } -+ if (areq->info) { -+ for (i = 0; i < 4 && i < ivsize / 4; i++) { -+ v = readl(ss->base + SS_IV0 + i * 4); -+ *(u32 *)(areq->info + i * 4) = v; -+ } -+ } -+ -+release_ss: -+ sg_miter_stop(&mi); -+ sg_miter_stop(&mo); -+ writel(0, ss->base + SS_CTL); -+ spin_unlock_bh(&ss->slock); -+ -+ return err; -+} -+ -+/* CBC AES */ -+int sun4i_ss_cbc_aes_encrypt(struct ablkcipher_request *areq) -+{ -+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); -+ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); -+ struct sun4i_cipher_req_ctx *rctx = ablkcipher_request_ctx(areq); -+ -+ rctx->mode = SS_OP_AES | SS_CBC | SS_ENABLED | SS_ENCRYPTION | -+ op->keymode; -+ return sun4i_ss_cipher_poll(areq); -+} -+ -+int sun4i_ss_cbc_aes_decrypt(struct ablkcipher_request *areq) -+{ -+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); -+ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); -+ struct sun4i_cipher_req_ctx *rctx = ablkcipher_request_ctx(areq); -+ -+ rctx->mode = SS_OP_AES | SS_CBC | SS_ENABLED | SS_DECRYPTION | -+ op->keymode; -+ return sun4i_ss_cipher_poll(areq); -+} -+ -+/* ECB AES */ -+int sun4i_ss_ecb_aes_encrypt(struct ablkcipher_request *areq) -+{ -+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); -+ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); -+ struct sun4i_cipher_req_ctx *rctx = ablkcipher_request_ctx(areq); -+ -+ rctx->mode = SS_OP_AES | SS_ECB | SS_ENABLED | SS_ENCRYPTION | -+ op->keymode; -+ return sun4i_ss_cipher_poll(areq); -+} -+ -+int sun4i_ss_ecb_aes_decrypt(struct ablkcipher_request *areq) -+{ -+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); -+ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); -+ struct sun4i_cipher_req_ctx *rctx = ablkcipher_request_ctx(areq); -+ -+ rctx->mode = SS_OP_AES | SS_ECB | SS_ENABLED | SS_DECRYPTION | -+ op->keymode; -+ return sun4i_ss_cipher_poll(areq); -+} -+ -+/* CBC DES */ -+int sun4i_ss_cbc_des_encrypt(struct ablkcipher_request *areq) -+{ -+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); -+ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); -+ struct sun4i_cipher_req_ctx *rctx = ablkcipher_request_ctx(areq); -+ -+ rctx->mode = SS_OP_DES | SS_CBC | SS_ENABLED | SS_ENCRYPTION | -+ op->keymode; -+ return sun4i_ss_cipher_poll(areq); -+} -+ -+int sun4i_ss_cbc_des_decrypt(struct ablkcipher_request *areq) -+{ -+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); -+ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); -+ struct sun4i_cipher_req_ctx *rctx = ablkcipher_request_ctx(areq); -+ -+ rctx->mode = SS_OP_DES | SS_CBC | SS_ENABLED | SS_DECRYPTION | -+ op->keymode; -+ return sun4i_ss_cipher_poll(areq); -+} -+ -+/* ECB DES */ -+int sun4i_ss_ecb_des_encrypt(struct ablkcipher_request *areq) -+{ -+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); -+ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); -+ struct sun4i_cipher_req_ctx *rctx = ablkcipher_request_ctx(areq); -+ -+ rctx->mode = SS_OP_DES | SS_ECB | SS_ENABLED | SS_ENCRYPTION | -+ op->keymode; -+ return sun4i_ss_cipher_poll(areq); -+} -+ -+int sun4i_ss_ecb_des_decrypt(struct ablkcipher_request *areq) -+{ -+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); -+ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); -+ struct sun4i_cipher_req_ctx *rctx = ablkcipher_request_ctx(areq); -+ -+ rctx->mode = SS_OP_DES | SS_ECB | SS_ENABLED | SS_DECRYPTION | -+ op->keymode; -+ return sun4i_ss_cipher_poll(areq); -+} -+ -+/* CBC 3DES */ -+int sun4i_ss_cbc_des3_encrypt(struct ablkcipher_request *areq) -+{ -+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); -+ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); -+ struct sun4i_cipher_req_ctx *rctx = ablkcipher_request_ctx(areq); -+ -+ rctx->mode = SS_OP_3DES | SS_CBC | SS_ENABLED | SS_ENCRYPTION | -+ op->keymode; -+ return sun4i_ss_cipher_poll(areq); -+} -+ -+int sun4i_ss_cbc_des3_decrypt(struct ablkcipher_request *areq) -+{ -+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); -+ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); -+ struct sun4i_cipher_req_ctx *rctx = ablkcipher_request_ctx(areq); -+ -+ rctx->mode = SS_OP_3DES | SS_CBC | SS_ENABLED | SS_DECRYPTION | -+ op->keymode; -+ return sun4i_ss_cipher_poll(areq); -+} -+ -+/* ECB 3DES */ -+int sun4i_ss_ecb_des3_encrypt(struct ablkcipher_request *areq) -+{ -+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); -+ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); -+ struct sun4i_cipher_req_ctx *rctx = ablkcipher_request_ctx(areq); -+ -+ rctx->mode = SS_OP_3DES | SS_ECB | SS_ENABLED | SS_ENCRYPTION | -+ op->keymode; -+ return sun4i_ss_cipher_poll(areq); -+} -+ -+int sun4i_ss_ecb_des3_decrypt(struct ablkcipher_request *areq) -+{ -+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); -+ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); -+ struct sun4i_cipher_req_ctx *rctx = ablkcipher_request_ctx(areq); -+ -+ rctx->mode = SS_OP_3DES | SS_ECB | SS_ENABLED | SS_DECRYPTION | -+ op->keymode; -+ return sun4i_ss_cipher_poll(areq); -+} -+ -+int sun4i_ss_cipher_init(struct crypto_tfm *tfm) -+{ -+ struct sun4i_tfm_ctx *op = crypto_tfm_ctx(tfm); -+ struct crypto_alg *alg = tfm->__crt_alg; -+ struct sun4i_ss_alg_template *algt; -+ -+ memset(op, 0, sizeof(struct sun4i_tfm_ctx)); -+ -+ algt = container_of(alg, struct sun4i_ss_alg_template, alg.crypto); -+ op->ss = algt->ss; -+ -+ tfm->crt_ablkcipher.reqsize = sizeof(struct sun4i_cipher_req_ctx); -+ -+ return 0; -+} -+ -+/* check and set the AES key, prepare the mode to be used */ -+int sun4i_ss_aes_setkey(struct crypto_ablkcipher *tfm, const u8 *key, -+ unsigned int keylen) -+{ -+ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); -+ struct sun4i_ss_ctx *ss = op->ss; -+ -+ switch (keylen) { -+ case 128 / 8: -+ op->keymode = SS_AES_128BITS; -+ break; -+ case 192 / 8: -+ op->keymode = SS_AES_192BITS; -+ break; -+ case 256 / 8: -+ op->keymode = SS_AES_256BITS; -+ break; -+ default: -+ dev_err(ss->dev, "ERROR: Invalid keylen %u\n", keylen); -+ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); -+ return -EINVAL; -+ } -+ op->keylen = keylen; -+ memcpy(op->key, key, keylen); -+ return 0; -+} -+ -+/* check and set the DES key, prepare the mode to be used */ -+int sun4i_ss_des_setkey(struct crypto_ablkcipher *tfm, const u8 *key, -+ unsigned int keylen) -+{ -+ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); -+ struct sun4i_ss_ctx *ss = op->ss; -+ u32 flags; -+ u32 tmp[DES_EXPKEY_WORDS]; -+ int ret; -+ -+ if (unlikely(keylen != DES_KEY_SIZE)) { -+ dev_err(ss->dev, "Invalid keylen %u\n", keylen); -+ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); -+ return -EINVAL; -+ } -+ -+ flags = crypto_ablkcipher_get_flags(tfm); -+ -+ ret = des_ekey(tmp, key); -+ if (unlikely(ret == 0) && (flags & CRYPTO_TFM_REQ_WEAK_KEY)) { -+ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_WEAK_KEY); -+ dev_dbg(ss->dev, "Weak key %u\n", keylen); -+ return -EINVAL; -+ } -+ -+ op->keylen = keylen; -+ memcpy(op->key, key, keylen); -+ return 0; -+} -+ -+/* check and set the 3DES key, prepare the mode to be used */ -+int sun4i_ss_des3_setkey(struct crypto_ablkcipher *tfm, const u8 *key, -+ unsigned int keylen) -+{ -+ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); -+ struct sun4i_ss_ctx *ss = op->ss; -+ -+ if (unlikely(keylen != 3 * DES_KEY_SIZE)) { -+ dev_err(ss->dev, "Invalid keylen %u\n", keylen); -+ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); -+ return -EINVAL; -+ } -+ op->keylen = keylen; -+ memcpy(op->key, key, keylen); -+ return 0; -+} ---- /dev/null -+++ b/drivers/crypto/sunxi-ss/sun4i-ss-core.c -@@ -0,0 +1,403 @@ -+/* -+ * sun4i-ss-core.c - hardware cryptographic accelerator for Allwinner A20 SoC -+ * -+ * Copyright (C) 2013-2015 Corentin LABBE <clabbe.montjoie@gmail.com> -+ * -+ * Core file which registers crypto algorithms supported by the SS. -+ * -+ * You could find a link for the datasheet in Documentation/arm/sunxi/README -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+#include <linux/clk.h> -+#include <linux/crypto.h> -+#include <linux/io.h> -+#include <linux/module.h> -+#include <linux/of.h> -+#include <linux/platform_device.h> -+#include <crypto/scatterwalk.h> -+#include <linux/scatterlist.h> -+#include <linux/interrupt.h> -+#include <linux/delay.h> -+ -+#include "sun4i-ss.h" -+ -+static struct sun4i_ss_alg_template ss_algs[] = { -+{ .type = CRYPTO_ALG_TYPE_AHASH, -+ .mode = SS_OP_MD5, -+ .alg.hash = { -+ .init = sun4i_hash_init, -+ .update = sun4i_hash_update, -+ .final = sun4i_hash_final, -+ .finup = sun4i_hash_finup, -+ .digest = sun4i_hash_digest, -+ .export = sun4i_hash_export_md5, -+ .import = sun4i_hash_import_md5, -+ .halg = { -+ .digestsize = MD5_DIGEST_SIZE, -+ .base = { -+ .cra_name = "md5", -+ .cra_driver_name = "md5-sun4i-ss", -+ .cra_priority = 300, -+ .cra_alignmask = 3, -+ .cra_flags = CRYPTO_ALG_TYPE_AHASH, -+ .cra_blocksize = MD5_HMAC_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct sun4i_req_ctx), -+ .cra_module = THIS_MODULE, -+ .cra_type = &crypto_ahash_type, -+ .cra_init = sun4i_hash_crainit -+ } -+ } -+ } -+}, -+{ .type = CRYPTO_ALG_TYPE_AHASH, -+ .mode = SS_OP_SHA1, -+ .alg.hash = { -+ .init = sun4i_hash_init, -+ .update = sun4i_hash_update, -+ .final = sun4i_hash_final, -+ .finup = sun4i_hash_finup, -+ .digest = sun4i_hash_digest, -+ .export = sun4i_hash_export_sha1, -+ .import = sun4i_hash_import_sha1, -+ .halg = { -+ .digestsize = SHA1_DIGEST_SIZE, -+ .base = { -+ .cra_name = "sha1", -+ .cra_driver_name = "sha1-sun4i-ss", -+ .cra_priority = 300, -+ .cra_alignmask = 3, -+ .cra_flags = CRYPTO_ALG_TYPE_AHASH, -+ .cra_blocksize = SHA1_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct sun4i_req_ctx), -+ .cra_module = THIS_MODULE, -+ .cra_type = &crypto_ahash_type, -+ .cra_init = sun4i_hash_crainit -+ } -+ } -+ } -+}, -+{ .type = CRYPTO_ALG_TYPE_ABLKCIPHER, -+ .alg.crypto = { -+ .cra_name = "cbc(aes)", -+ .cra_driver_name = "cbc-aes-sun4i-ss", -+ .cra_priority = 300, -+ .cra_blocksize = AES_BLOCK_SIZE, -+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER, -+ .cra_ctxsize = sizeof(struct sun4i_tfm_ctx), -+ .cra_module = THIS_MODULE, -+ .cra_alignmask = 3, -+ .cra_type = &crypto_ablkcipher_type, -+ .cra_init = sun4i_ss_cipher_init, -+ .cra_ablkcipher = { -+ .min_keysize = AES_MIN_KEY_SIZE, -+ .max_keysize = AES_MAX_KEY_SIZE, -+ .ivsize = AES_BLOCK_SIZE, -+ .setkey = sun4i_ss_aes_setkey, -+ .encrypt = sun4i_ss_cbc_aes_encrypt, -+ .decrypt = sun4i_ss_cbc_aes_decrypt, -+ } -+ } -+}, -+{ .type = CRYPTO_ALG_TYPE_ABLKCIPHER, -+ .alg.crypto = { -+ .cra_name = "ecb(aes)", -+ .cra_driver_name = "ecb-aes-sun4i-ss", -+ .cra_priority = 300, -+ .cra_blocksize = AES_BLOCK_SIZE, -+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER, -+ .cra_ctxsize = sizeof(struct sun4i_tfm_ctx), -+ .cra_module = THIS_MODULE, -+ .cra_alignmask = 3, -+ .cra_type = &crypto_ablkcipher_type, -+ .cra_init = sun4i_ss_cipher_init, -+ .cra_ablkcipher = { -+ .min_keysize = AES_MIN_KEY_SIZE, -+ .max_keysize = AES_MAX_KEY_SIZE, -+ .ivsize = AES_BLOCK_SIZE, -+ .setkey = sun4i_ss_aes_setkey, -+ .encrypt = sun4i_ss_ecb_aes_encrypt, -+ .decrypt = sun4i_ss_ecb_aes_decrypt, -+ } -+ } -+}, -+{ .type = CRYPTO_ALG_TYPE_ABLKCIPHER, -+ .alg.crypto = { -+ .cra_name = "cbc(des)", -+ .cra_driver_name = "cbc-des-sun4i-ss", -+ .cra_priority = 300, -+ .cra_blocksize = DES_BLOCK_SIZE, -+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER, -+ .cra_ctxsize = sizeof(struct sun4i_req_ctx), -+ .cra_module = THIS_MODULE, -+ .cra_alignmask = 3, -+ .cra_type = &crypto_ablkcipher_type, -+ .cra_init = sun4i_ss_cipher_init, -+ .cra_u.ablkcipher = { -+ .min_keysize = DES_KEY_SIZE, -+ .max_keysize = DES_KEY_SIZE, -+ .ivsize = DES_BLOCK_SIZE, -+ .setkey = sun4i_ss_des_setkey, -+ .encrypt = sun4i_ss_cbc_des_encrypt, -+ .decrypt = sun4i_ss_cbc_des_decrypt, -+ } -+ } -+}, -+{ .type = CRYPTO_ALG_TYPE_ABLKCIPHER, -+ .alg.crypto = { -+ .cra_name = "ecb(des)", -+ .cra_driver_name = "ecb-des-sun4i-ss", -+ .cra_priority = 300, -+ .cra_blocksize = DES_BLOCK_SIZE, -+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER, -+ .cra_ctxsize = sizeof(struct sun4i_req_ctx), -+ .cra_module = THIS_MODULE, -+ .cra_alignmask = 3, -+ .cra_type = &crypto_ablkcipher_type, -+ .cra_init = sun4i_ss_cipher_init, -+ .cra_u.ablkcipher = { -+ .min_keysize = DES_KEY_SIZE, -+ .max_keysize = DES_KEY_SIZE, -+ .setkey = sun4i_ss_des_setkey, -+ .encrypt = sun4i_ss_ecb_des_encrypt, -+ .decrypt = sun4i_ss_ecb_des_decrypt, -+ } -+ } -+}, -+{ .type = CRYPTO_ALG_TYPE_ABLKCIPHER, -+ .alg.crypto = { -+ .cra_name = "cbc(des3_ede)", -+ .cra_driver_name = "cbc-des3-sun4i-ss", -+ .cra_priority = 300, -+ .cra_blocksize = DES3_EDE_BLOCK_SIZE, -+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER, -+ .cra_ctxsize = sizeof(struct sun4i_req_ctx), -+ .cra_module = THIS_MODULE, -+ .cra_alignmask = 3, -+ .cra_type = &crypto_ablkcipher_type, -+ .cra_init = sun4i_ss_cipher_init, -+ .cra_u.ablkcipher = { -+ .min_keysize = DES3_EDE_KEY_SIZE, -+ .max_keysize = DES3_EDE_KEY_SIZE, -+ .ivsize = DES3_EDE_BLOCK_SIZE, -+ .setkey = sun4i_ss_des3_setkey, -+ .encrypt = sun4i_ss_cbc_des3_encrypt, -+ .decrypt = sun4i_ss_cbc_des3_decrypt, -+ } -+ } -+}, -+{ .type = CRYPTO_ALG_TYPE_ABLKCIPHER, -+ .alg.crypto = { -+ .cra_name = "ecb(des3_ede)", -+ .cra_driver_name = "ecb-des3-sun4i-ss", -+ .cra_priority = 300, -+ .cra_blocksize = DES3_EDE_BLOCK_SIZE, -+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER, -+ .cra_ctxsize = sizeof(struct sun4i_req_ctx), -+ .cra_module = THIS_MODULE, -+ .cra_alignmask = 3, -+ .cra_type = &crypto_ablkcipher_type, -+ .cra_init = sun4i_ss_cipher_init, -+ .cra_u.ablkcipher = { -+ .min_keysize = DES3_EDE_KEY_SIZE, -+ .max_keysize = DES3_EDE_KEY_SIZE, -+ .ivsize = DES3_EDE_BLOCK_SIZE, -+ .setkey = sun4i_ss_des3_setkey, -+ .encrypt = sun4i_ss_ecb_des3_encrypt, -+ .decrypt = sun4i_ss_ecb_des3_decrypt, -+ } -+ } -+}, -+}; -+ -+static int sun4i_ss_probe(struct platform_device *pdev) -+{ -+ struct resource *res; -+ u32 v; -+ int err, i; -+ unsigned long cr; -+ const unsigned long cr_ahb = 24 * 1000 * 1000; -+ const unsigned long cr_mod = 150 * 1000 * 1000; -+ struct sun4i_ss_ctx *ss; -+ -+ if (!pdev->dev.of_node) -+ return -ENODEV; -+ -+ ss = devm_kzalloc(&pdev->dev, sizeof(*ss), GFP_KERNEL); -+ if (!ss) -+ return -ENOMEM; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ ss->base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(ss->base)) { -+ dev_err(&pdev->dev, "Cannot request MMIO\n"); -+ return PTR_ERR(ss->base); -+ } -+ -+ ss->ssclk = devm_clk_get(&pdev->dev, "mod"); -+ if (IS_ERR(ss->ssclk)) { -+ err = PTR_ERR(ss->ssclk); -+ dev_err(&pdev->dev, "Cannot get SS clock err=%d\n", err); -+ return err; -+ } -+ dev_dbg(&pdev->dev, "clock ss acquired\n"); -+ -+ ss->busclk = devm_clk_get(&pdev->dev, "ahb"); -+ if (IS_ERR(ss->busclk)) { -+ err = PTR_ERR(ss->busclk); -+ dev_err(&pdev->dev, "Cannot get AHB SS clock err=%d\n", err); -+ return err; -+ } -+ dev_dbg(&pdev->dev, "clock ahb_ss acquired\n"); -+ -+ /* Enable both clocks */ -+ err = clk_prepare_enable(ss->busclk); -+ if (err != 0) { -+ dev_err(&pdev->dev, "Cannot prepare_enable busclk\n"); -+ return err; -+ } -+ err = clk_prepare_enable(ss->ssclk); -+ if (err != 0) { -+ dev_err(&pdev->dev, "Cannot prepare_enable ssclk\n"); -+ goto error_ssclk; -+ } -+ -+ /* -+ * Check that clock have the correct rates given in the datasheet -+ * Try to set the clock to the maximum allowed -+ */ -+ err = clk_set_rate(ss->ssclk, cr_mod); -+ if (err != 0) { -+ dev_err(&pdev->dev, "Cannot set clock rate to ssclk\n"); -+ goto error_clk; -+ } -+ -+ /* -+ * The only impact on clocks below requirement are bad performance, -+ * so do not print "errors" -+ * warn on Overclocked clocks -+ */ -+ cr = clk_get_rate(ss->busclk); -+ if (cr >= cr_ahb) -+ dev_dbg(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n", -+ cr, cr / 1000000, cr_ahb); -+ else -+ dev_warn(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n", -+ cr, cr / 1000000, cr_ahb); -+ -+ cr = clk_get_rate(ss->ssclk); -+ if (cr <= cr_mod) -+ if (cr < cr_mod) -+ dev_warn(&pdev->dev, "Clock ss %lu (%lu MHz) (must be <= %lu)\n", -+ cr, cr / 1000000, cr_mod); -+ else -+ dev_dbg(&pdev->dev, "Clock ss %lu (%lu MHz) (must be <= %lu)\n", -+ cr, cr / 1000000, cr_mod); -+ else -+ dev_warn(&pdev->dev, "Clock ss is at %lu (%lu MHz) (must be <= %lu)\n", -+ cr, cr / 1000000, cr_mod); -+ -+ /* -+ * Datasheet named it "Die Bonding ID" -+ * I expect to be a sort of Security System Revision number. -+ * Since the A80 seems to have an other version of SS -+ * this info could be useful -+ */ -+ writel(SS_ENABLED, ss->base + SS_CTL); -+ v = readl(ss->base + SS_CTL); -+ v >>= 16; -+ v &= 0x07; -+ dev_info(&pdev->dev, "Die ID %d\n", v); -+ writel(0, ss->base + SS_CTL); -+ -+ ss->dev = &pdev->dev; -+ -+ spin_lock_init(&ss->slock); -+ -+ for (i = 0; i < ARRAY_SIZE(ss_algs); i++) { -+ ss_algs[i].ss = ss; -+ switch (ss_algs[i].type) { -+ case CRYPTO_ALG_TYPE_ABLKCIPHER: -+ err = crypto_register_alg(&ss_algs[i].alg.crypto); -+ if (err != 0) { -+ dev_err(ss->dev, "Fail to register %s\n", -+ ss_algs[i].alg.crypto.cra_name); -+ goto error_alg; -+ } -+ break; -+ case CRYPTO_ALG_TYPE_AHASH: -+ err = crypto_register_ahash(&ss_algs[i].alg.hash); -+ if (err != 0) { -+ dev_err(ss->dev, "Fail to register %s\n", -+ ss_algs[i].alg.hash.halg.base.cra_name); -+ goto error_alg; -+ } -+ break; -+ } -+ } -+ platform_set_drvdata(pdev, ss); -+ return 0; -+error_alg: -+ i--; -+ for (; i >= 0; i--) { -+ switch (ss_algs[i].type) { -+ case CRYPTO_ALG_TYPE_ABLKCIPHER: -+ crypto_unregister_alg(&ss_algs[i].alg.crypto); -+ break; -+ case CRYPTO_ALG_TYPE_AHASH: -+ crypto_unregister_ahash(&ss_algs[i].alg.hash); -+ break; -+ } -+ } -+error_clk: -+ clk_disable_unprepare(ss->ssclk); -+error_ssclk: -+ clk_disable_unprepare(ss->busclk); -+ return err; -+} -+ -+static int sun4i_ss_remove(struct platform_device *pdev) -+{ -+ int i; -+ struct sun4i_ss_ctx *ss = platform_get_drvdata(pdev); -+ -+ for (i = 0; i < ARRAY_SIZE(ss_algs); i++) { -+ switch (ss_algs[i].type) { -+ case CRYPTO_ALG_TYPE_ABLKCIPHER: -+ crypto_unregister_alg(&ss_algs[i].alg.crypto); -+ break; -+ case CRYPTO_ALG_TYPE_AHASH: -+ crypto_unregister_ahash(&ss_algs[i].alg.hash); -+ break; -+ } -+ } -+ -+ writel(0, ss->base + SS_CTL); -+ clk_disable_unprepare(ss->busclk); -+ clk_disable_unprepare(ss->ssclk); -+ return 0; -+} -+ -+static const struct of_device_id a20ss_crypto_of_match_table[] = { -+ { .compatible = "allwinner,sun4i-a10-crypto" }, -+ {} -+}; -+MODULE_DEVICE_TABLE(of, a20ss_crypto_of_match_table); -+ -+static struct platform_driver sun4i_ss_driver = { -+ .probe = sun4i_ss_probe, -+ .remove = sun4i_ss_remove, -+ .driver = { -+ .name = "sun4i-ss", -+ .of_match_table = a20ss_crypto_of_match_table, -+ }, -+}; -+ -+module_platform_driver(sun4i_ss_driver); -+ -+MODULE_DESCRIPTION("Allwinner Security System cryptographic accelerator"); -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Corentin LABBE <clabbe.montjoie@gmail.com>"); ---- /dev/null -+++ b/drivers/crypto/sunxi-ss/sun4i-ss-hash.c -@@ -0,0 +1,492 @@ -+/* -+ * sun4i-ss-hash.c - hardware cryptographic accelerator for Allwinner A20 SoC -+ * -+ * Copyright (C) 2013-2015 Corentin LABBE <clabbe.montjoie@gmail.com> -+ * -+ * This file add support for MD5 and SHA1. -+ * -+ * You could find the datasheet in Documentation/arm/sunxi/README -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+#include "sun4i-ss.h" -+#include <linux/scatterlist.h> -+ -+/* This is a totally arbitrary value */ -+#define SS_TIMEOUT 100 -+ -+int sun4i_hash_crainit(struct crypto_tfm *tfm) -+{ -+ crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm), -+ sizeof(struct sun4i_req_ctx)); -+ return 0; -+} -+ -+/* sun4i_hash_init: initialize request context */ -+int sun4i_hash_init(struct ahash_request *areq) -+{ -+ struct sun4i_req_ctx *op = ahash_request_ctx(areq); -+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq); -+ struct ahash_alg *alg = __crypto_ahash_alg(tfm->base.__crt_alg); -+ struct sun4i_ss_alg_template *algt; -+ struct sun4i_ss_ctx *ss; -+ -+ memset(op, 0, sizeof(struct sun4i_req_ctx)); -+ -+ algt = container_of(alg, struct sun4i_ss_alg_template, alg.hash); -+ ss = algt->ss; -+ op->ss = algt->ss; -+ op->mode = algt->mode; -+ -+ return 0; -+} -+ -+int sun4i_hash_export_md5(struct ahash_request *areq, void *out) -+{ -+ struct sun4i_req_ctx *op = ahash_request_ctx(areq); -+ struct md5_state *octx = out; -+ int i; -+ -+ octx->byte_count = op->byte_count + op->len; -+ -+ memcpy(octx->block, op->buf, op->len); -+ -+ if (op->byte_count > 0) { -+ for (i = 0; i < 4; i++) -+ octx->hash[i] = op->hash[i]; -+ } else { -+ octx->hash[0] = SHA1_H0; -+ octx->hash[1] = SHA1_H1; -+ octx->hash[2] = SHA1_H2; -+ octx->hash[3] = SHA1_H3; -+ } -+ -+ return 0; -+} -+ -+int sun4i_hash_import_md5(struct ahash_request *areq, const void *in) -+{ -+ struct sun4i_req_ctx *op = ahash_request_ctx(areq); -+ const struct md5_state *ictx = in; -+ int i; -+ -+ sun4i_hash_init(areq); -+ -+ op->byte_count = ictx->byte_count & ~0x3F; -+ op->len = ictx->byte_count & 0x3F; -+ -+ memcpy(op->buf, ictx->block, op->len); -+ -+ for (i = 0; i < 4; i++) -+ op->hash[i] = ictx->hash[i]; -+ -+ return 0; -+} -+ -+int sun4i_hash_export_sha1(struct ahash_request *areq, void *out) -+{ -+ struct sun4i_req_ctx *op = ahash_request_ctx(areq); -+ struct sha1_state *octx = out; -+ int i; -+ -+ octx->count = op->byte_count + op->len; -+ -+ memcpy(octx->buffer, op->buf, op->len); -+ -+ if (op->byte_count > 0) { -+ for (i = 0; i < 5; i++) -+ octx->state[i] = op->hash[i]; -+ } else { -+ octx->state[0] = SHA1_H0; -+ octx->state[1] = SHA1_H1; -+ octx->state[2] = SHA1_H2; -+ octx->state[3] = SHA1_H3; -+ octx->state[4] = SHA1_H4; -+ } -+ -+ return 0; -+} -+ -+int sun4i_hash_import_sha1(struct ahash_request *areq, const void *in) -+{ -+ struct sun4i_req_ctx *op = ahash_request_ctx(areq); -+ const struct sha1_state *ictx = in; -+ int i; -+ -+ sun4i_hash_init(areq); -+ -+ op->byte_count = ictx->count & ~0x3F; -+ op->len = ictx->count & 0x3F; -+ -+ memcpy(op->buf, ictx->buffer, op->len); -+ -+ for (i = 0; i < 5; i++) -+ op->hash[i] = ictx->state[i]; -+ -+ return 0; -+} -+ -+/* -+ * sun4i_hash_update: update hash engine -+ * -+ * Could be used for both SHA1 and MD5 -+ * Write data by step of 32bits and put then in the SS. -+ * -+ * Since we cannot leave partial data and hash state in the engine, -+ * we need to get the hash state at the end of this function. -+ * We can get the hash state every 64 bytes -+ * -+ * So the first work is to get the number of bytes to write to SS modulo 64 -+ * The extra bytes will go to a temporary buffer op->buf storing op->len bytes -+ * -+ * So at the begin of update() -+ * if op->len + areq->nbytes < 64 -+ * => all data will be written to wait buffer (op->buf) and end=0 -+ * if not, write all data from op->buf to the device and position end to -+ * complete to 64bytes -+ * -+ * example 1: -+ * update1 60o => op->len=60 -+ * update2 60o => need one more word to have 64 bytes -+ * end=4 -+ * so write all data from op->buf and one word of SGs -+ * write remaining data in op->buf -+ * final state op->len=56 -+ */ -+int sun4i_hash_update(struct ahash_request *areq) -+{ -+ u32 v, ivmode = 0; -+ unsigned int i = 0; -+ /* -+ * i is the total bytes read from SGs, to be compared to areq->nbytes -+ * i is important because we cannot rely on SG length since the sum of -+ * SG->length could be greater than areq->nbytes -+ */ -+ -+ struct sun4i_req_ctx *op = ahash_request_ctx(areq); -+ struct sun4i_ss_ctx *ss = op->ss; -+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq); -+ unsigned int in_i = 0; /* advancement in the current SG */ -+ unsigned int end; -+ /* -+ * end is the position when we need to stop writing to the device, -+ * to be compared to i -+ */ -+ int in_r, err = 0; -+ unsigned int todo; -+ u32 spaces, rx_cnt = SS_RX_DEFAULT; -+ size_t copied = 0; -+ struct sg_mapping_iter mi; -+ -+ dev_dbg(ss->dev, "%s %s bc=%llu len=%u mode=%x wl=%u h0=%0x", -+ __func__, crypto_tfm_alg_name(areq->base.tfm), -+ op->byte_count, areq->nbytes, op->mode, -+ op->len, op->hash[0]); -+ -+ if (areq->nbytes == 0) -+ return 0; -+ -+ /* protect against overflow */ -+ if (areq->nbytes > UINT_MAX - op->len) { -+ dev_err(ss->dev, "Cannot process too large request\n"); -+ return -EINVAL; -+ } -+ -+ if (op->len + areq->nbytes < 64) { -+ /* linearize data to op->buf */ -+ copied = sg_pcopy_to_buffer(areq->src, sg_nents(areq->src), -+ op->buf + op->len, areq->nbytes, 0); -+ op->len += copied; -+ return 0; -+ } -+ -+ end = ((areq->nbytes + op->len) / 64) * 64 - op->len; -+ -+ if (end > areq->nbytes || areq->nbytes - end > 63) { -+ dev_err(ss->dev, "ERROR: Bound error %u %u\n", -+ end, areq->nbytes); -+ return -EINVAL; -+ } -+ -+ spin_lock_bh(&ss->slock); -+ -+ /* -+ * if some data have been processed before, -+ * we need to restore the partial hash state -+ */ -+ if (op->byte_count > 0) { -+ ivmode = SS_IV_ARBITRARY; -+ for (i = 0; i < 5; i++) -+ writel(op->hash[i], ss->base + SS_IV0 + i * 4); -+ } -+ /* Enable the device */ -+ writel(op->mode | SS_ENABLED | ivmode, ss->base + SS_CTL); -+ -+ i = 0; -+ sg_miter_start(&mi, areq->src, sg_nents(areq->src), -+ SG_MITER_FROM_SG | SG_MITER_ATOMIC); -+ sg_miter_next(&mi); -+ in_i = 0; -+ -+ do { -+ /* -+ * we need to linearize in two case: -+ * - the buffer is already used -+ * - the SG does not have enough byte remaining ( < 4) -+ */ -+ if (op->len > 0 || (mi.length - in_i) < 4) { -+ /* -+ * if we have entered here we have two reason to stop -+ * - the buffer is full -+ * - reach the end -+ */ -+ while (op->len < 64 && i < end) { -+ /* how many bytes we can read from current SG */ -+ in_r = min3(mi.length - in_i, end - i, -+ 64 - op->len); -+ memcpy(op->buf + op->len, mi.addr + in_i, in_r); -+ op->len += in_r; -+ i += in_r; -+ in_i += in_r; -+ if (in_i == mi.length) { -+ sg_miter_next(&mi); -+ in_i = 0; -+ } -+ } -+ if (op->len > 3 && (op->len % 4) == 0) { -+ /* write buf to the device */ -+ writesl(ss->base + SS_RXFIFO, op->buf, -+ op->len / 4); -+ op->byte_count += op->len; -+ op->len = 0; -+ } -+ } -+ if (mi.length - in_i > 3 && i < end) { -+ /* how many bytes we can read from current SG */ -+ in_r = min3(mi.length - in_i, areq->nbytes - i, -+ ((mi.length - in_i) / 4) * 4); -+ /* how many bytes we can write in the device*/ -+ todo = min3((u32)(end - i) / 4, rx_cnt, (u32)in_r / 4); -+ writesl(ss->base + SS_RXFIFO, mi.addr + in_i, todo); -+ op->byte_count += todo * 4; -+ i += todo * 4; -+ in_i += todo * 4; -+ rx_cnt -= todo; -+ if (rx_cnt == 0) { -+ spaces = readl(ss->base + SS_FCSR); -+ rx_cnt = SS_RXFIFO_SPACES(spaces); -+ } -+ if (in_i == mi.length) { -+ sg_miter_next(&mi); -+ in_i = 0; -+ } -+ } -+ } while (i < end); -+ /* final linear */ -+ if ((areq->nbytes - i) < 64) { -+ while (i < areq->nbytes && in_i < mi.length && op->len < 64) { -+ /* how many bytes we can read from current SG */ -+ in_r = min3(mi.length - in_i, areq->nbytes - i, -+ 64 - op->len); -+ memcpy(op->buf + op->len, mi.addr + in_i, in_r); -+ op->len += in_r; -+ i += in_r; -+ in_i += in_r; -+ if (in_i == mi.length) { -+ sg_miter_next(&mi); -+ in_i = 0; -+ } -+ } -+ } -+ -+ sg_miter_stop(&mi); -+ -+ writel(op->mode | SS_ENABLED | SS_DATA_END, ss->base + SS_CTL); -+ i = 0; -+ do { -+ v = readl(ss->base + SS_CTL); -+ i++; -+ } while (i < SS_TIMEOUT && (v & SS_DATA_END) > 0); -+ if (i >= SS_TIMEOUT) { -+ dev_err_ratelimited(ss->dev, -+ "ERROR: hash end timeout %d>%d ctl=%x len=%u\n", -+ i, SS_TIMEOUT, v, areq->nbytes); -+ err = -EIO; -+ goto release_ss; -+ } -+ -+ /* get the partial hash only if something was written */ -+ for (i = 0; i < crypto_ahash_digestsize(tfm) / 4; i++) -+ op->hash[i] = readl(ss->base + SS_MD0 + i * 4); -+ -+release_ss: -+ writel(0, ss->base + SS_CTL); -+ spin_unlock_bh(&ss->slock); -+ return err; -+} -+ -+/* -+ * sun4i_hash_final: finalize hashing operation -+ * -+ * If we have some remaining bytes, we write them. -+ * Then ask the SS for finalizing the hashing operation -+ * -+ * I do not check RX FIFO size in this function since the size is 32 -+ * after each enabling and this function neither write more than 32 words. -+ */ -+int sun4i_hash_final(struct ahash_request *areq) -+{ -+ u32 v, ivmode = 0; -+ unsigned int i; -+ unsigned int j = 0; -+ int zeros, err = 0; -+ unsigned int index, padlen; -+ __be64 bits; -+ struct sun4i_req_ctx *op = ahash_request_ctx(areq); -+ struct sun4i_ss_ctx *ss = op->ss; -+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq); -+ u32 bf[32]; -+ u32 wb = 0; -+ unsigned int nwait, nbw = 0; -+ -+ dev_dbg(ss->dev, "%s: byte=%llu len=%u mode=%x wl=%u h=%x", -+ __func__, op->byte_count, areq->nbytes, op->mode, -+ op->len, op->hash[0]); -+ -+ spin_lock_bh(&ss->slock); -+ -+ /* -+ * if we have already written something, -+ * restore the partial hash state -+ */ -+ if (op->byte_count > 0) { -+ ivmode = SS_IV_ARBITRARY; -+ for (i = 0; i < crypto_ahash_digestsize(tfm) / 4; i++) -+ writel(op->hash[i], ss->base + SS_IV0 + i * 4); -+ } -+ writel(op->mode | SS_ENABLED | ivmode, ss->base + SS_CTL); -+ -+ /* write the remaining words of the wait buffer */ -+ if (op->len > 0) { -+ nwait = op->len / 4; -+ if (nwait > 0) { -+ writesl(ss->base + SS_RXFIFO, op->buf, nwait); -+ op->byte_count += 4 * nwait; -+ } -+ nbw = op->len - 4 * nwait; -+ wb = *(u32 *)(op->buf + nwait * 4); -+ wb &= (0xFFFFFFFF >> (4 - nbw) * 8); -+ } -+ -+ /* write the remaining bytes of the nbw buffer */ -+ if (nbw > 0) { -+ wb |= ((1 << 7) << (nbw * 8)); -+ bf[j++] = wb; -+ } else { -+ bf[j++] = 1 << 7; -+ } -+ -+ /* -+ * number of space to pad to obtain 64o minus 8(size) minus 4 (final 1) -+ * I take the operations from other MD5/SHA1 implementations -+ */ -+ -+ /* we have already send 4 more byte of which nbw data */ -+ if (op->mode == SS_OP_MD5) { -+ index = (op->byte_count + 4) & 0x3f; -+ op->byte_count += nbw; -+ if (index > 56) -+ zeros = (120 - index) / 4; -+ else -+ zeros = (56 - index) / 4; -+ } else { -+ op->byte_count += nbw; -+ index = op->byte_count & 0x3f; -+ padlen = (index < 56) ? (56 - index) : ((64 + 56) - index); -+ zeros = (padlen - 1) / 4; -+ } -+ -+ memset(bf + j, 0, 4 * zeros); -+ j += zeros; -+ -+ /* write the length of data */ -+ if (op->mode == SS_OP_SHA1) { -+ bits = cpu_to_be64(op->byte_count << 3); -+ bf[j++] = bits & 0xffffffff; -+ bf[j++] = (bits >> 32) & 0xffffffff; -+ } else { -+ bf[j++] = (op->byte_count << 3) & 0xffffffff; -+ bf[j++] = (op->byte_count >> 29) & 0xffffffff; -+ } -+ writesl(ss->base + SS_RXFIFO, bf, j); -+ -+ /* Tell the SS to stop the hashing */ -+ writel(op->mode | SS_ENABLED | SS_DATA_END, ss->base + SS_CTL); -+ -+ /* -+ * Wait for SS to finish the hash. -+ * The timeout could happen only in case of bad overcloking -+ * or driver bug. -+ */ -+ i = 0; -+ do { -+ v = readl(ss->base + SS_CTL); -+ i++; -+ } while (i < SS_TIMEOUT && (v & SS_DATA_END) > 0); -+ if (i >= SS_TIMEOUT) { -+ dev_err_ratelimited(ss->dev, -+ "ERROR: hash end timeout %d>%d ctl=%x len=%u\n", -+ i, SS_TIMEOUT, v, areq->nbytes); -+ err = -EIO; -+ goto release_ss; -+ } -+ -+ /* Get the hash from the device */ -+ if (op->mode == SS_OP_SHA1) { -+ for (i = 0; i < 5; i++) { -+ v = cpu_to_be32(readl(ss->base + SS_MD0 + i * 4)); -+ memcpy(areq->result + i * 4, &v, 4); -+ } -+ } else { -+ for (i = 0; i < 4; i++) { -+ v = readl(ss->base + SS_MD0 + i * 4); -+ memcpy(areq->result + i * 4, &v, 4); -+ } -+ } -+ -+release_ss: -+ writel(0, ss->base + SS_CTL); -+ spin_unlock_bh(&ss->slock); -+ return err; -+} -+ -+/* sun4i_hash_finup: finalize hashing operation after an update */ -+int sun4i_hash_finup(struct ahash_request *areq) -+{ -+ int err; -+ -+ err = sun4i_hash_update(areq); -+ if (err != 0) -+ return err; -+ -+ return sun4i_hash_final(areq); -+} -+ -+/* combo of init/update/final functions */ -+int sun4i_hash_digest(struct ahash_request *areq) -+{ -+ int err; -+ -+ err = sun4i_hash_init(areq); -+ if (err != 0) -+ return err; -+ -+ err = sun4i_hash_update(areq); -+ if (err != 0) -+ return err; -+ -+ return sun4i_hash_final(areq); -+} ---- /dev/null -+++ b/drivers/crypto/sunxi-ss/sun4i-ss.h -@@ -0,0 +1,199 @@ -+/* -+ * sun4i-ss.h - hardware cryptographic accelerator for Allwinner A20 SoC -+ * -+ * Copyright (C) 2013-2015 Corentin LABBE <clabbe.montjoie@gmail.com> -+ * -+ * Support AES cipher with 128,192,256 bits keysize. -+ * Support MD5 and SHA1 hash algorithms. -+ * Support DES and 3DES -+ * -+ * You could find the datasheet in Documentation/arm/sunxi/README -+ * -+ * Licensed under the GPL-2. -+ */ -+ -+#include <linux/clk.h> -+#include <linux/crypto.h> -+#include <linux/io.h> -+#include <linux/module.h> -+#include <linux/of.h> -+#include <linux/platform_device.h> -+#include <crypto/scatterwalk.h> -+#include <linux/scatterlist.h> -+#include <linux/interrupt.h> -+#include <linux/delay.h> -+#include <crypto/md5.h> -+#include <crypto/sha.h> -+#include <crypto/hash.h> -+#include <crypto/internal/hash.h> -+#include <crypto/aes.h> -+#include <crypto/des.h> -+#include <crypto/internal/rng.h> -+ -+#define SS_CTL 0x00 -+#define SS_KEY0 0x04 -+#define SS_KEY1 0x08 -+#define SS_KEY2 0x0C -+#define SS_KEY3 0x10 -+#define SS_KEY4 0x14 -+#define SS_KEY5 0x18 -+#define SS_KEY6 0x1C -+#define SS_KEY7 0x20 -+ -+#define SS_IV0 0x24 -+#define SS_IV1 0x28 -+#define SS_IV2 0x2C -+#define SS_IV3 0x30 -+ -+#define SS_FCSR 0x44 -+ -+#define SS_MD0 0x4C -+#define SS_MD1 0x50 -+#define SS_MD2 0x54 -+#define SS_MD3 0x58 -+#define SS_MD4 0x5C -+ -+#define SS_RXFIFO 0x200 -+#define SS_TXFIFO 0x204 -+ -+/* SS_CTL configuration values */ -+ -+/* PRNG generator mode - bit 15 */ -+#define SS_PRNG_ONESHOT (0 << 15) -+#define SS_PRNG_CONTINUE (1 << 15) -+ -+/* IV mode for hash */ -+#define SS_IV_ARBITRARY (1 << 14) -+ -+/* SS operation mode - bits 12-13 */ -+#define SS_ECB (0 << 12) -+#define SS_CBC (1 << 12) -+#define SS_CTS (3 << 12) -+ -+/* Counter width for CNT mode - bits 10-11 */ -+#define SS_CNT_16BITS (0 << 10) -+#define SS_CNT_32BITS (1 << 10) -+#define SS_CNT_64BITS (2 << 10) -+ -+/* Key size for AES - bits 8-9 */ -+#define SS_AES_128BITS (0 << 8) -+#define SS_AES_192BITS (1 << 8) -+#define SS_AES_256BITS (2 << 8) -+ -+/* Operation direction - bit 7 */ -+#define SS_ENCRYPTION (0 << 7) -+#define SS_DECRYPTION (1 << 7) -+ -+/* SS Method - bits 4-6 */ -+#define SS_OP_AES (0 << 4) -+#define SS_OP_DES (1 << 4) -+#define SS_OP_3DES (2 << 4) -+#define SS_OP_SHA1 (3 << 4) -+#define SS_OP_MD5 (4 << 4) -+#define SS_OP_PRNG (5 << 4) -+ -+/* Data end bit - bit 2 */ -+#define SS_DATA_END (1 << 2) -+ -+/* PRNG start bit - bit 1 */ -+#define SS_PRNG_START (1 << 1) -+ -+/* SS Enable bit - bit 0 */ -+#define SS_DISABLED (0 << 0) -+#define SS_ENABLED (1 << 0) -+ -+/* SS_FCSR configuration values */ -+/* RX FIFO status - bit 30 */ -+#define SS_RXFIFO_FREE (1 << 30) -+ -+/* RX FIFO empty spaces - bits 24-29 */ -+#define SS_RXFIFO_SPACES(val) (((val) >> 24) & 0x3f) -+ -+/* TX FIFO status - bit 22 */ -+#define SS_TXFIFO_AVAILABLE (1 << 22) -+ -+/* TX FIFO available spaces - bits 16-21 */ -+#define SS_TXFIFO_SPACES(val) (((val) >> 16) & 0x3f) -+ -+#define SS_RX_MAX 32 -+#define SS_RX_DEFAULT SS_RX_MAX -+#define SS_TX_MAX 33 -+ -+#define SS_RXFIFO_EMP_INT_PENDING (1 << 10) -+#define SS_TXFIFO_AVA_INT_PENDING (1 << 8) -+#define SS_RXFIFO_EMP_INT_ENABLE (1 << 2) -+#define SS_TXFIFO_AVA_INT_ENABLE (1 << 0) -+ -+struct sun4i_ss_ctx { -+ void __iomem *base; -+ int irq; -+ struct clk *busclk; -+ struct clk *ssclk; -+ struct device *dev; -+ struct resource *res; -+ spinlock_t slock; /* control the use of the device */ -+}; -+ -+struct sun4i_ss_alg_template { -+ u32 type; -+ u32 mode; -+ union { -+ struct crypto_alg crypto; -+ struct ahash_alg hash; -+ } alg; -+ struct sun4i_ss_ctx *ss; -+}; -+ -+struct sun4i_tfm_ctx { -+ u32 key[AES_MAX_KEY_SIZE / 4];/* divided by sizeof(u32) */ -+ u32 keylen; -+ u32 keymode; -+ struct sun4i_ss_ctx *ss; -+}; -+ -+struct sun4i_cipher_req_ctx { -+ u32 mode; -+}; -+ -+struct sun4i_req_ctx { -+ u32 mode; -+ u64 byte_count; /* number of bytes "uploaded" to the device */ -+ u32 hash[5]; /* for storing SS_IVx register */ -+ char buf[64]; -+ unsigned int len; -+ struct sun4i_ss_ctx *ss; -+}; -+ -+int sun4i_hash_crainit(struct crypto_tfm *tfm); -+int sun4i_hash_init(struct ahash_request *areq); -+int sun4i_hash_update(struct ahash_request *areq); -+int sun4i_hash_final(struct ahash_request *areq); -+int sun4i_hash_finup(struct ahash_request *areq); -+int sun4i_hash_digest(struct ahash_request *areq); -+int sun4i_hash_export_md5(struct ahash_request *areq, void *out); -+int sun4i_hash_import_md5(struct ahash_request *areq, const void *in); -+int sun4i_hash_export_sha1(struct ahash_request *areq, void *out); -+int sun4i_hash_import_sha1(struct ahash_request *areq, const void *in); -+ -+int sun4i_ss_cbc_aes_encrypt(struct ablkcipher_request *areq); -+int sun4i_ss_cbc_aes_decrypt(struct ablkcipher_request *areq); -+int sun4i_ss_ecb_aes_encrypt(struct ablkcipher_request *areq); -+int sun4i_ss_ecb_aes_decrypt(struct ablkcipher_request *areq); -+ -+int sun4i_ss_cbc_des_encrypt(struct ablkcipher_request *areq); -+int sun4i_ss_cbc_des_decrypt(struct ablkcipher_request *areq); -+int sun4i_ss_ecb_des_encrypt(struct ablkcipher_request *areq); -+int sun4i_ss_ecb_des_decrypt(struct ablkcipher_request *areq); -+ -+int sun4i_ss_cbc_des3_encrypt(struct ablkcipher_request *areq); -+int sun4i_ss_cbc_des3_decrypt(struct ablkcipher_request *areq); -+int sun4i_ss_ecb_des3_encrypt(struct ablkcipher_request *areq); -+int sun4i_ss_ecb_des3_decrypt(struct ablkcipher_request *areq); -+ -+int sun4i_ss_cipher_init(struct crypto_tfm *tfm); -+int sun4i_ss_aes_setkey(struct crypto_ablkcipher *tfm, const u8 *key, -+ unsigned int keylen); -+int sun4i_ss_des_setkey(struct crypto_ablkcipher *tfm, const u8 *key, -+ unsigned int keylen); -+int sun4i_ss_des3_setkey(struct crypto_ablkcipher *tfm, const u8 *key, -+ unsigned int keylen); diff --git a/target/linux/sunxi/patches-4.1/201-dt-sun7i-add-oob-irq-to-bcm-sdio-wifi.patch b/target/linux/sunxi/patches-4.1/201-dt-sun7i-add-oob-irq-to-bcm-sdio-wifi.patch deleted file mode 100644 index 0322387..0000000 --- a/target/linux/sunxi/patches-4.1/201-dt-sun7i-add-oob-irq-to-bcm-sdio-wifi.patch +++ /dev/null @@ -1,64 +0,0 @@ -From e4127db9b980a5684c537d9010ed2aaa05a1e79a Mon Sep 17 00:00:00 2001 -From: Hans de Goede <hdegoede@redhat.com> -Date: Sat, 24 May 2014 20:53:49 +0200 -Subject: [PATCH] ARM: dts: sun7i: Add OOB irq support to boards with broadcom - sdio wifi - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 11 +++++++++++ - arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts | 11 +++++++++++ - 2 files changed, 22 insertions(+) - ---- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -@@ -71,12 +71,23 @@ - }; - - mmc3: mmc@01c12000 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; - vmmc-supply = <®_vmmc3>; - bus-width = <4>; - non-removable; - status = "okay"; -+ -+ brcmf: bcrmf@1 { -+ reg = <1>; -+ compatible = "brcm,bcm4329-fmac"; -+ interrupt-parent = <&pio>; -+ interrupts = <10 8>; /* PH10 / EINT10 */ -+ interrupt-names = "host-wake"; -+ }; - }; - - usbphy: phy@01c13400 { ---- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts -+++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts -@@ -69,12 +69,23 @@ - }; - - mmc3: mmc@01c12000 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; - vmmc-supply = <®_vmmc3>; - bus-width = <4>; - non-removable; - status = "okay"; -+ -+ brcmf: bcrmf@1 { -+ reg = <1>; -+ compatible = "brcm,bcm4329-fmac"; -+ interrupt-parent = <&pio>; -+ interrupts = <10 8>; /* PH10 / EINT10 */ -+ interrupt-names = "host-wake"; -+ }; - }; - - usbphy: phy@01c13400 { diff --git a/target/linux/sunxi/patches-4.1/202-dt-sun7i-add-bluetooth-to-cubietruck.patch b/target/linux/sunxi/patches-4.1/202-dt-sun7i-add-bluetooth-to-cubietruck.patch deleted file mode 100644 index ae5576f..0000000 --- a/target/linux/sunxi/patches-4.1/202-dt-sun7i-add-bluetooth-to-cubietruck.patch +++ /dev/null @@ -1,75 +0,0 @@ -From c6e2b7dad39a7887f935458d1c8de84db06243e1 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai <wens@csie.org> -Date: Thu, 26 Dec 2013 17:15:47 +0800 -Subject: [PATCH] ARM: dts: sun7i: add bluetooth module to CubieTruck DTS - -The CubieTruck has an AMPAK AP6210 WiFi+Bluetooth module. The -Bluetooth part is a BCM20710 IC connected to UART2 in the A20 -SoC. The IC also takes a 32.768 KHz low power clock input, a power -enable signal and a wake signal via GPIO. - -The Bluetooth module supports out-of-band interrupt signaling via -GPIO, but this is not supported in this patch. ---- - arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 36 ++++++++++++++++++++++++++++++ - 1 file changed, 36 insertions(+) - ---- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -@@ -88,6 +88,20 @@ - interrupts = <10 8>; /* PH10 / EINT10 */ - interrupt-names = "host-wake"; - }; -+ -+ bt_pwr_pin: bt_pwr_pin@0 { -+ allwinner,pins = "PH18"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ bt_wake_pin: bt_wake_pin@0 { -+ allwinner,pins = "PH24"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; - }; - - usbphy: phy@01c13400 { -@@ -171,6 +185,12 @@ - status = "okay"; - }; - -+ uart2: serial@01c28800 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart2_pins_a>; -+ status = "okay"; -+ }; -+ - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; -@@ -264,6 +284,22 @@ - enable-active-high; - gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; - }; -+ -+ rfkill-switches { -+ compatible = "simple-bus"; -+ pinctrl-names = "default"; -+ -+ rfkill_bt { -+ compatible = "rfkill-gpio"; -+ pinctrl-0 = <&bt_pwr_pin>, <&clk_out_a_pins_a>; -+ rfkill-name = "bt"; -+ rfkill-type = <2>; -+ bt_shutdown-gpios = <0>, <&pio 7 18 0>; /* PH18 */ -+ bt_reset-gpios = <&pio 7 24 0>; /* PH24 */ -+ clocks = <&clk_out_a>; -+ clock-frequency = <32768>; -+ }; -+ }; - }; - - #include "axp209.dtsi" diff --git a/target/linux/sunxi/patches-4.1/300-dt-sun7i-add-lamobo-r1.patch b/target/linux/sunxi/patches-4.1/300-dt-sun7i-add-lamobo-r1.patch deleted file mode 100644 index 83de5fd..0000000 --- a/target/linux/sunxi/patches-4.1/300-dt-sun7i-add-lamobo-r1.patch +++ /dev/null @@ -1,248 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -554,6 +554,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ - sun7i-a20-cubietruck.dtb \ - sun7i-a20-hummingbird.dtb \ - sun7i-a20-i12-tvbox.dtb \ -+ sun7i-a20-lamobo-r1.dtb \ - sun7i-a20-m3.dtb \ - sun7i-a20-olinuxino-lime.dtb \ - sun7i-a20-olinuxino-lime2.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts -@@ -0,0 +1,235 @@ -+/* -+ * Copyright 2015 Daniel Golle <daniel@makrotopia.org> -+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com> -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This library is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This library is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public -+ * License along with this library; if not, write to the Free -+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -+ * MA 02110-1301 USA -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+#include "sun7i-a20.dtsi" -+#include "sunxi-common-regulators.dtsi" -+#include <dt-bindings/input/input.h> -+ -+/ { -+ model = "Lamobo R1"; -+ compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20"; -+ -+ soc@01c00000 { -+ spi0: spi@01c05000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins_a>; -+ status = "okay"; -+ }; -+ -+ mmc0: mmc@01c0f000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo>; -+ vmmc-supply = <®_vcc3v3>; -+ bus-width = <4>; -+ cd-gpios = <&pio 7 10 0>; /* PH10 */ -+ cd-inverted; -+ status = "okay"; -+ }; -+ -+ usbphy: phy@01c13400 { -+ usb1_vbus-supply = <®_usb1_vbus>; -+ usb2_vbus-supply = <®_usb2_vbus>; -+ status = "okay"; -+ }; -+ -+ ehci0: usb@01c14000 { -+ status = "okay"; -+ }; -+ -+ ohci0: usb@01c14400 { -+ status = "okay"; -+ }; -+ -+ ahci: sata@01c18000 { -+ target-supply = <®_ahci_5v>; -+ status = "okay"; -+ }; -+ -+ ehci1: usb@01c1c000 { -+ status = "okay"; -+ }; -+ -+ ohci1: usb@01c1c400 { -+ status = "okay"; -+ }; -+ -+ pinctrl@01c20800 { -+ mmc0_cd_pin_lamobo: mmc0_cd_pin@0 { -+ allwinner,pins = "PH10"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = <0>; -+ allwinner,pull = <1>; -+ }; -+ -+ gmac_power_pin_lamobo: gmac_power_pin@0 { -+ allwinner,pins = "PH23"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ led_pins_lamobo: led_pins@0 { -+ allwinner,pins = "PH2"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <1>; -+ allwinner,pull = <0>; -+ }; -+ }; -+ -+ lradc: lradc@01c22800 { -+ allwinner,chan0-step = <200>; -+ linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN -+ KEY_MENU KEY_SEARCH KEY_HOME -+ KEY_ESC KEY_ENTER>; -+ status = "okay"; -+ }; -+ -+ ir0: ir@01c21800 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ir0_pins_a>; -+ status = "okay"; -+ }; -+ -+ uart0: serial@01c28000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins_a>; -+ status = "okay"; -+ }; -+ -+ uart3: serial@01c28c00 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart3_pins_b>; -+ status = "okay"; -+ }; -+ -+ uart7: serial@01c29c00 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart7_pins_a>; -+ status = "okay"; -+ }; -+ -+ i2c0: i2c@01c2ac00 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins_a>; -+ status = "okay"; -+ -+ axp209: pmic@34 { -+ compatible = "x-powers,axp209"; -+ reg = <0x34>; -+ interrupt-parent = <&nmi_intc>; -+ interrupts = <0 8>; -+ -+ interrupt-controller; -+ #interrupt-cells = <1>; -+ }; -+ }; -+ -+ i2c1: i2c@01c2b000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins_a>; -+ status = "okay"; -+ }; -+ -+ i2c2: i2c@01c2b400 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c2_pins_a>; -+ status = "okay"; -+ }; -+ -+ gmac: ethernet@01c50000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gmac_pins_rgmii_a>; -+ phy = <&phy1>; -+ phy-mode = "rgmii"; -+ phy-supply = <®_gmac_3v3>; -+ status = "okay"; -+ -+ phy1: ethernet-phy@1 { -+ reg = <1>; -+ }; -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&led_pins_lamobo>; -+ -+ green { -+ label = "lamobo:green:usr"; -+ gpios = <&pio 7 24 0>; -+ default-state = "on"; -+ }; -+ }; -+ -+ reg_ahci_5v: ahci-5v { -+ status = "okay"; -+ }; -+ -+ reg_usb1_vbus: usb1-vbus { -+ status = "okay"; -+ }; -+ -+ reg_usb2_vbus: usb2-vbus { -+ status = "okay"; -+ }; -+ -+ reg_gmac_3v3: gmac-3v3 { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gmac_power_pin_lamobo>; -+ regulator-name = "gmac-3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ startup-delay-us = <100000>; -+ enable-active-high; -+ gpio = <&pio 7 23 0>; -+ status = "okay"; -+ }; -+}; |