diff options
Diffstat (limited to 'target/linux/xburst/patches-2.6.32/103-serial.patch')
| -rw-r--r-- | target/linux/xburst/patches-2.6.32/103-serial.patch | 173 |
1 files changed, 0 insertions, 173 deletions
diff --git a/target/linux/xburst/patches-2.6.32/103-serial.patch b/target/linux/xburst/patches-2.6.32/103-serial.patch deleted file mode 100644 index 2810631..0000000 --- a/target/linux/xburst/patches-2.6.32/103-serial.patch +++ /dev/null @@ -1,173 +0,0 @@ -From 5b3f9de4171368d9a99fa4c8b8b1bcc8505fb3c6 Mon Sep 17 00:00:00 2001 -From: Lars-Peter Clausen <lars@metafoo.de> -Date: Mon, 11 Jan 2010 04:29:44 +0100 -Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-serial.patch - ---- - drivers/serial/8250.c | 104 ++++++++++++++++++++++++++++++++++++++++++++++++- - 1 files changed, 103 insertions(+), 1 deletions(-) - ---- a/drivers/serial/8250.c -+++ b/drivers/serial/8250.c -@@ -199,7 +199,7 @@ static const struct serial8250_config ua - [PORT_16550A] = { - .name = "16550A", - .fifo_size = 16, -- .tx_loadsz = 16, -+ .tx_loadsz = 8, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO, - }, -@@ -406,6 +406,10 @@ static unsigned int mem_serial_in(struct - static void mem_serial_out(struct uart_port *p, int offset, int value) - { - offset = map_8250_out_reg(p, offset) << p->regshift; -+#if defined(CONFIG_JZSOC) -+ if (offset == (UART_FCR << p->regshift)) -+ value |= 0x10; /* set FCR.UUE */ -+#endif - writeb(value, p->membase + offset); - } - -@@ -2214,6 +2218,83 @@ static void serial8250_shutdown(struct u - serial_unlink_irq_chain(up); - } - -+#if defined(CONFIG_JZSOC) && !defined(CONFIG_SOC_JZ4730) -+static unsigned short quot1[3] = {0}; /* quot[0]:baud_div, quot[1]:umr, quot[2]:uacr */ -+static unsigned short * serial8250_get_divisor(struct uart_port *port, unsigned int baud) -+{ -+ int err, sum, i, j; -+ int a[12], b[12]; -+ unsigned short div, umr, uacr; -+ unsigned short umr_best, div_best, uacr_best; -+ long long t0, t1, t2, t3; -+ -+ sum = 0; -+ umr_best = div_best = uacr_best = 0; -+ div = 1; -+ -+ if ((port->uartclk % (16 * baud)) == 0) { -+ quot1[0] = port->uartclk / (16 * baud); -+ quot1[1] = 16; -+ quot1[2] = 0; -+ return quot1; -+ } -+ -+ while (1) { -+ umr = port->uartclk / (baud * div); -+ if (umr > 32) { -+ div++; -+ continue; -+ } -+ if (umr < 4) { -+ break; -+ } -+ for (i = 0; i < 12; i++) { -+ a[i] = umr; -+ b[i] = 0; -+ sum = 0; -+ for (j = 0; j <= i; j++) { -+ sum += a[j]; -+ } -+ -+ /* the precision could be 1/2^(36) due to the value of t0 */ -+ t0 = 0x1000000000LL; -+ t1 = (i + 1) * t0; -+ t2 = (sum * div) * t0; -+ t3 = div * t0; -+ do_div(t1, baud); -+ do_div(t2, port->uartclk); -+ do_div(t3, (2 * port->uartclk)); -+ err = t1 - t2 - t3; -+ -+ if (err > 0) { -+ a[i] += 1; -+ b[i] = 1; -+ } -+ } -+ -+ uacr = 0; -+ for (i = 0; i < 12; i++) { -+ if (b[i] == 1) { -+ uacr |= 1 << i; -+ } -+ } -+ -+ /* the best value of umr should be near 16, and the value of uacr should better be smaller */ -+ if (abs(umr - 16) < abs(umr_best - 16) || (abs(umr - 16) == abs(umr_best - 16) && uacr_best > uacr)) { -+ div_best = div; -+ umr_best = umr; -+ uacr_best = uacr; -+ } -+ div++; -+ } -+ -+ quot1[0] = div_best; -+ quot1[1] = umr_best; -+ quot1[2] = uacr_best; -+ -+ return quot1; -+} -+#else - static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud) - { - unsigned int quot; -@@ -2233,6 +2314,7 @@ static unsigned int serial8250_get_divis - - return quot; - } -+#endif - - static void - serial8250_set_termios(struct uart_port *port, struct ktermios *termios, -@@ -2242,6 +2324,9 @@ serial8250_set_termios(struct uart_port - unsigned char cval, fcr = 0; - unsigned long flags; - unsigned int baud, quot; -+#if defined(CONFIG_JZSOC) && !defined(CONFIG_SOC_JZ4730) -+ unsigned short *quot1; -+#endif - - switch (termios->c_cflag & CSIZE) { - case CS5: -@@ -2276,7 +2361,12 @@ serial8250_set_termios(struct uart_port - baud = uart_get_baud_rate(port, termios, old, - port->uartclk / 16 / 0xffff, - port->uartclk / 16); -+#if defined(CONFIG_JZSOC) && !defined(CONFIG_SOC_JZ4730) -+ quot1 = serial8250_get_divisor(port, baud); -+ quot = quot1[0]; /* not usefull, just let gcc happy */ -+#else - quot = serial8250_get_divisor(port, baud); -+#endif - - /* - * Oxford Semi 952 rev B workaround -@@ -2354,6 +2444,10 @@ serial8250_set_termios(struct uart_port - if (up->capabilities & UART_CAP_UUE) - up->ier |= UART_IER_UUE | UART_IER_RTOIE; - -+#ifdef CONFIG_JZSOC -+ up->ier |= UART_IER_RTOIE; /* Set this flag, or very slow */ -+#endif -+ - serial_out(up, UART_IER, up->ier); - - if (up->capabilities & UART_CAP_EFR) { -@@ -2388,7 +2482,15 @@ serial8250_set_termios(struct uart_port - serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ - } - -+#if defined(CONFIG_JZSOC) && !defined(CONFIG_SOC_JZ4730) -+#define UART_UMR 9 -+#define UART_UACR 10 -+ serial_dl_write(up, quot1[0]); -+ serial_outp(up, UART_UMR, quot1[1]); -+ serial_outp(up, UART_UACR, quot1[2]); -+#else - serial_dl_write(up, quot); -+#endif - - /* - * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR |