1 files changed, 0 insertions, 196 deletions
diff --git a/target/linux/xburst/patches-2.6.37/008-add-id800wt-board-support.patch b/target/linux/xburst/patches-2.6.37/008-add-id800wt-board-support.patch
deleted file mode 100644
index 04f367c..0000000
--- a/target/linux/xburst/patches-2.6.37/008-add-id800wt-board-support.patch
+++ /dev/null
@@ -1,196 +0,0 @@
-From ac67a626a852d6e720c2cc474b5e8824ad5b0875 Mon Sep 17 00:00:00 2001
-From: Lars-Peter Clausen <lars@metafoo.de>
-Date: Sun, 5 Sep 2010 20:34:08 +0200
-Subject: [PATCH 12/23] MIPS: JZ4740: Add id800wt board
-
----
- arch/mips/jz4740/Kconfig         |    4 +
- arch/mips/jz4740/Makefile        |    1 +
- arch/mips/jz4740/board-id800wt.c |  158 ++++++++++++++++++++++++++++++++++++++
- 3 files changed, 163 insertions(+), 0 deletions(-)
- create mode 100644 arch/mips/jz4740/board-id800wt.c
-
---- a/arch/mips/jz4740/Kconfig
-+++ b/arch/mips/jz4740/Kconfig
-@@ -14,6 +14,10 @@ config JZ4740_N526
- 	bool "Hanvon n526 eBook reader"
- 	select SOC_JZ4740
- 
-+config JZ4740_ID800WT
-+	bool "Sungale id800wt picture frame"
-+	select SOC_JZ4740
-+
- endchoice
- 
- config HAVE_PWM
---- a/arch/mips/jz4740/Makefile
-+++ b/arch/mips/jz4740/Makefile
-@@ -14,6 +14,7 @@ obj-$(CONFIG_DEBUG_FS) += clock-debugfs.
- obj-$(CONFIG_JZ4740_QI_LB60)	+= board-qi_lb60.o
- obj-$(CONFIG_JZ4740_N516)	+= board-n516.o board-n516-display.o
- obj-$(CONFIG_JZ4740_N526)	+= board-n526.o
-+obj-$(CONFIG_JZ4740_ID800WT)	+= board-id800wt.o
- 
- # PM support
- 
---- /dev/null
-+++ b/arch/mips/jz4740/board-id800wt.c
-@@ -0,0 +1,158 @@
-+/*
-+ * Copyright (C) 2010 Lars-Peter Clausen <lars@metafoo.de>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 or later
-+ * as published by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/gpio.h>
-+
-+#include <asm/mach-jz4740/platform.h>
-+
-+#include <linux/input.h>
-+#include <linux/power_supply.h>
-+#include <linux/pwm_backlight.h>
-+
-+#include "clock.h"
-+
-+#include <asm/mach-jz4740/jz4740_fb.h>
-+#include <asm/mach-jz4740/jz4740_nand.h>
-+
-+/* NAND */
-+static struct nand_ecclayout id800wt_ecclayout = {
-+	.oobfree = {
-+		{
-+			.offset = 2,
-+			.length = 4,
-+		},
-+		{
-+			.offset = 42,
-+			.length = 22,
-+		},
-+	}
-+};
-+
-+static struct mtd_partition id800wt_partitions[] = {
-+	{ .name = "NAND BOOT partition",
-+	  .offset = 0 * 0x100000,
-+	  .size = 2 * 0x100000,
-+	},
-+	{ .name = "NAND KERNEL partition",
-+	  .offset = 2 * 0x100000,
-+	  .size = 4 * 0x100000,
-+	},
-+	{ .name = "NAND ROOTFS partition",
-+	  .offset = 6 * 0x100000,
-+	  .size = 498 * 0x100000,
-+	},
-+};
-+
-+static struct jz_nand_platform_data id800wt_nand_pdata = {
-+	.ecc_layout = &id800wt_ecclayout,
-+	.partitions = id800wt_partitions,
-+	.num_partitions = ARRAY_SIZE(id800wt_partitions),
-+	.busy_gpio = JZ_GPIO_PORTC(30),
-+};
-+
-+/* Display */
-+static struct fb_videomode id800wt_video_modes[] = {
-+	{
-+		.name = "800x600",
-+		.xres = 800,
-+		.yres = 600,
-+		.refresh = 40,
-+		.left_margin = 0,
-+		.right_margin = 255,
-+		.upper_margin = 0,
-+		.lower_margin = 35,
-+		.hsync_len = 1,
-+		.vsync_len = 1,
-+		.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+		.vmode = FB_VMODE_NONINTERLACED,
-+	},
-+};
-+
-+static struct jz4740_fb_platform_data id800wt_fb_pdata = {
-+	.width		= 60,
-+	.height		= 45,
-+	.num_modes	= ARRAY_SIZE(id800wt_video_modes),
-+	.modes		= id800wt_video_modes,
-+	.bpp		= 16,
-+	.lcd_type	= JZ_LCD_TYPE_SPECIAL_TFT_1,
-+	.pixclk_falling_edge = 1,
-+	.special_tft_config = {
-+		.spl = JZ4740_FB_SPECIAL_TFT_CONFIG(1051, 1053),
-+		.cls = JZ4740_FB_SPECIAL_TFT_CONFIG(631, 744),
-+		.ps  = JZ4740_FB_SPECIAL_TFT_CONFIG(0, 45),
-+		.rev = JZ4740_FB_SPECIAL_TFT_CONFIG(0, 0),
-+	},
-+};
-+
-+/* Backlight */
-+static int id800wt_backlight_invert(struct device *dev, int brightness)
-+{
-+	return 255 - brightness;
-+}
-+
-+static struct platform_pwm_backlight_data id800wt_backlight_data = {
-+	.pwm_id = 7,
-+	.max_brightness = 255,
-+	.dft_brightness = 255,
-+	.pwm_period_ns = 8000000,
-+	.notify = id800wt_backlight_invert,
-+};
-+
-+static struct platform_device id800wt_backlight_device = {
-+	.name = "pwm-backlight",
-+	.id = -1,
-+	.dev = {
-+		.platform_data = &id800wt_backlight_data,
-+		.parent = &jz4740_framebuffer_device.dev,
-+	},
-+};
-+
-+static struct platform_device *jz_platform_devices[] __initdata = {
-+	&jz4740_usb_ohci_device,
-+	&jz4740_udc_device,
-+	&jz4740_nand_device,
-+	&jz4740_framebuffer_device,
-+	&jz4740_i2s_device,
-+	&jz4740_codec_device,
-+	&jz4740_pcm_device,
-+	&jz4740_rtc_device,
-+	&jz4740_adc_device,
-+	&id800wt_backlight_device,
-+};
-+
-+static int __init id800wt_init_platform_devices(void)
-+{
-+	jz4740_framebuffer_device.dev.platform_data = &id800wt_fb_pdata;
-+	jz4740_nand_device.dev.platform_data = &id800wt_nand_pdata;
-+
-+	jz4740_serial_device_register();
-+
-+	jz_gpio_enable_pullup(JZ_GPIO_LCD_PS);
-+	jz_gpio_enable_pullup(JZ_GPIO_LCD_REV);
-+
-+	return platform_add_devices(jz_platform_devices,
-+					ARRAY_SIZE(jz_platform_devices));
-+}
-+
-+struct jz4740_clock_board_data jz4740_clock_bdata = {
-+	.ext_rate = 12000000,
-+	.rtc_rate = 32768,
-+};
-+
-+static int __init id800wt_board_setup(void)
-+{
-+	printk("Sungale pictureframe id800wt setup\n");
-+
-+	if (id800wt_init_platform_devices())
-+		panic("Failed to initalize platform devices\n");
-+
-+	return 0;
-+}
-+arch_initcall(id800wt_board_setup);