diff options
Diffstat (limited to 'target/linux/xburst')
10 files changed, 47 insertions, 55 deletions
diff --git a/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/board-qi_lb60.h b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/board-qi_lb60.h index e5de9da..cfbf073 100644 --- a/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/board-qi_lb60.h +++ b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/board-qi_lb60.h @@ -20,11 +20,6 @@ #define __ASM_JZ4740_QI_LB60_H__ #include <linux/gpio.h> -/* - * Frequencies of on-board oscillators - */ -#define JZ_EXTAL 12000000 /* Main extal freq: 12 MHz */ -#define JZ_EXTAL_RTC 32768 /* RTC extal freq: 32.768 KHz */ /* * GPIO diff --git a/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/clock.h b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/clock.h index c75c07b..1f8e53b 100644 --- a/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/clock.h +++ b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/clock.h @@ -23,7 +23,6 @@ enum jz4740_wait_mode JZ4740_WAIT_MODE_SLEEP, }; -int jz_init_clocks(unsigned long ext_rate); void jz4740_clock_set_wait_mode(enum jz4740_wait_mode mode); void jz4740_clock_udc_enable_auto_suspend(void); diff --git a/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/jz4740.h b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/jz4740.h index 7f9293a..9885db2 100644 --- a/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/jz4740.h +++ b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/jz4740.h @@ -26,9 +26,6 @@ #include <asm/mach-jz4740/board-qi_lb60.h> #endif -/* Add other platform definition here ... */ - - /*------------------------------------------------------------------ * Follows are related to platform definitions */ diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-n526.c b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-n526.c index fa46278..6e65417 100644 --- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-n526.c +++ b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-n526.c @@ -22,7 +22,6 @@ #include <linux/mtd/jz4740_nand.h> #include <linux/jz4740_fb.h> #include <linux/power_supply.h> -#include <linux/power/jz4740-battery.h> #include <linux/mmc/jz4740_mmc.h> #include <video/broadsheetfb.h> @@ -35,6 +34,8 @@ #include <linux/i2c.h> #include <linux/i2c-gpio.h> +#include "clock.h" + /* NAND */ static struct nand_ecclayout n526_ecclayout = { .eccbytes = 36, @@ -73,19 +74,6 @@ static struct jz_nand_platform_data n526_nand_pdata = { .busy_gpio = 94, }; - -/* Battery */ -/*static struct jz_batt_info n526_battery_pdata = { - .dc_dect_gpio = GPIO_DC_DETE_N, - .usb_dect_gpio = GPIO_USB_DETE, - .charg_stat_gpio = GPIO_CHARG_STAT_N, - - .min_voltag = 3600000, - .max_voltag = 4200000, - .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO, -};*/ - - static struct jz4740_mmc_platform_data n526_mmc_pdata = { .gpio_card_detect = JZ_GPIO_PORTD(7), .card_detect_active_low = 1, @@ -144,7 +132,6 @@ value) static int n526_eink_wait(struct broadsheetfb_par *par) { - int i = 0; wait_event(par->waitq, gpio_get_value(JZ_GPIO_PORTB(17))); return 0; @@ -171,36 +158,35 @@ static void n526_eink_set_hdb(struct broadsheetfb_par *par, u16 value) static int n526_eink_init(struct broadsheetfb_par *par) { - int i = 0; + int i; - gpio_request(JZ_GPIO_PORTD(1), "display reset?"); + gpio_request(JZ_GPIO_PORTD(1), "display reset"); gpio_direction_output(JZ_GPIO_PORTD(1), 1); mdelay(10); gpio_set_value(JZ_GPIO_PORTD(1), 0); - gpio_request(JZ_GPIO_PORTB(18), "foobar"); + gpio_request(JZ_GPIO_PORTB(18), "eink enable"); gpio_direction_output(JZ_GPIO_PORTB(18), 0); gpio_request(JZ_GPIO_PORTB(29), "foobar"); gpio_direction_output(JZ_GPIO_PORTB(29), 1); - for(i = 1; i < ARRAY_SIZE(n526_eink_ctrl_gpios); ++i) { - gpio_request(n526_eink_ctrl_gpios[i], "foobar"); + gpio_request(n526_eink_ctrl_gpios[i], "eink display ctrl"); gpio_direction_output(n526_eink_ctrl_gpios[i], 0); } gpio_request(JZ_GPIO_PORTC(22), "foobar"); gpio_direction_input(JZ_GPIO_PORTC(22)); - gpio_request(JZ_GPIO_PORTC(21), "foobar"); + gpio_request(JZ_GPIO_PORTC(21), "eink nRD"); gpio_direction_output(JZ_GPIO_PORTC(21), 1); for(i = 0; i < 16; ++i) { - gpio_request(JZ_GPIO_PORTC(i), "display data"); + gpio_request(JZ_GPIO_PORTC(i), "eink display data"); } jz_gpio_port_direction_output(JZ_GPIO_PORTC(0), 0xffff); - gpio_direction_output(JZ_GPIO_PORTB(18), 1); + gpio_set_value(JZ_GPIO_PORTB(18), 1); return 0; } @@ -218,12 +204,12 @@ static int n526_eink_setup_irq(struct fb_info *info) int ret; struct broadsheetfb_par *par = info->par; - gpio_request(JZ_GPIO_PORTB(17), "foobar"); + gpio_request(JZ_GPIO_PORTB(17), "eink busy"); gpio_direction_input(JZ_GPIO_PORTB(17)); ret = request_irq(gpio_to_irq(JZ_GPIO_PORTB(17)), n526_eink_busy_irq, IRQF_DISABLED | IRQF_TRIGGER_RISING, - "eInk busyline", par); + "eink busyline", par); if (ret) printk("n526 display: Failed to request busyline irq: %d\n", ret); return 0; @@ -294,7 +280,6 @@ static struct i2c_board_info n526_i2c_board_info = { .addr = 0x54, }; - static struct platform_device *jz_platform_devices[] __initdata = { &jz4740_usb_ohci_device, &jz4740_usb_gdt_device, @@ -314,7 +299,6 @@ static int __init n526_init_platform_devices(void) { jz4740_nand_device.dev.platform_data = &n526_nand_pdata; -/* jz4740_battery_device.dev.platform_data = &n526_battery_pdata;*/ jz4740_mmc_device.dev.platform_data = &n526_mmc_pdata; n526_i2c_board_info.irq = gpio_to_irq(JZ_GPIO_PORTD(14)), @@ -325,16 +309,19 @@ static int __init n526_init_platform_devices(void) } +struct jz4740_clock_board_data jz4740_clock_bdata = { + .ext_rate = 12000000, + .rtc_rate = 32768, +}; extern int jz_gpiolib_init(void); -extern int jz_init_clocks(unsigned long extal); static int __init n526_board_setup(void) { if (jz_gpiolib_init()) panic("Failed to initalize jz gpio\n"); - jz_init_clocks(12000000); + jz4740_init_clocks(); board_gpio_setup(); if (n526_init_platform_devices()) diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-qi_lb60.c b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-qi_lb60.c index 249d4c5..bf08636 100644 --- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-qi_lb60.c +++ b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-qi_lb60.c @@ -31,6 +31,7 @@ #include <linux/power/gpio-charger.h> #include <linux/mmc/jz4740_mmc.h> +#include "clock.h" /* NAND */ static struct nand_ecclayout qi_lb60_ecclayout_1gb = { @@ -118,7 +119,6 @@ static struct jz_nand_platform_data qi_lb60_nand_pdata = { .busy_gpio = 94, }; - /* Keyboard*/ /* #define KEEP_UART_ALIVE @@ -387,12 +387,18 @@ static int __init qi_lb60_init_platform_devices(void) ARRAY_SIZE(jz_platform_devices)); } + +struct jz4740_clock_board_data jz4740_clock_bdata = { + .ext_rate = 12000000, + .rtc_rate = 32768, +}; + extern int jz_gpiolib_init(void); -extern int jz_init_clocks(unsigned long extal); static __init int board_avt2(char *str) { qi_lb60_mmc_pdata.card_detect_active_low = 1; + qi_lb60_mmc_pdata.power_active_low = 1; return 1; } @@ -404,8 +410,8 @@ static int __init qi_lb60_board_setup(void) printk("Qi Hardware JZ4740 QI_LB60 setup\n"); if (jz_gpiolib_init()) panic("Failed to initalize jz gpio\n"); - jz_init_clocks(12000000); + jz_init_clocks(); board_gpio_setup(); if (qi_lb60_init_platform_devices()) diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/clock.c b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/clock.c index 1b32a8d..26ae08d 100644 --- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/clock.c +++ b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/clock.c @@ -873,7 +873,7 @@ void jz4740_clock_udc_enable_auto_suspend(void) } EXPORT_SYMBOL_GPL(jz4740_clock_udc_enable_auto_suspend); -int jz_init_clocks(unsigned long ext_rate) +int jz_init_clocks(void) { uint32_t val; @@ -883,7 +883,8 @@ int jz_init_clocks(unsigned long ext_rate) spin_lock_init(&jz_clock_lock); - jz_clk_ext.rate = ext_rate; + jz_clk_ext.rate = jz4740_clock_bdata.ext_rate; + jz_clk_rtc.rate = jz4740_clock_bdata.rtc_rate; val = jz_clk_reg_read(JZ_REG_CLOCK_SPI); diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/clock.h b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/clock.h index 88ce07d..e0fd9ec 100644 --- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/clock.h +++ b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/clock.h @@ -16,6 +16,17 @@ #ifndef __JZ4740_CLOCK_H__ #define __JZ4740_CLOCK_H__ +struct jz4740_clock_board_data { + unsigned long ext_rate; + unsigned long rtc_rate; +}; + +extern struct jz4740_clock_board_data jz4740_clock_bdata; + +int jz_init_clocks(void); + +struct clk; + struct clk_ops { unsigned long (*get_rate)(struct clk* clk); unsigned long (*round_rate)(struct clk *clk, unsigned long rate); diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/reset.c b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/reset.c index a4b2292..e4fd522 100644 --- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/reset.c +++ b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/reset.c @@ -21,12 +21,14 @@ #include <asm/mach-jz4740/timer.h> #include <asm/mach-jz4740/jz4740.h> +#include "clock.h" + void jz_restart(char *command) { printk(KERN_NOTICE "Restarting after 4 ms\n"); REG_WDT_TCSR = WDT_TCSR_PRESCALE4 | WDT_TCSR_EXT_EN; REG_WDT_TCNT = 0; - REG_WDT_TDR = JZ_EXTAL/1000; /* reset after 4ms */ + REG_WDT_TDR = jz4740_clock_bdata.ext_rate / 1000; /* reset after 4ms */ jz4740_timer_enable_watchdog(); REG_WDT_TCER = WDT_TCER_TCEN; /* wdt start */ while (1); diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/setup.c b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/setup.c index 466d5fd..f475ff6 100644 --- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/setup.c +++ b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/setup.c @@ -41,12 +41,12 @@ #include <asm/mach-jz4740/clock.h> #include <asm/mach-jz4740/serial.h> +#include "clock.h" + extern char *__init prom_getcmdline(void); -extern void __init jz_board_setup(void); extern void jz_restart(char *); extern void jz_halt(void); extern void jz_power_off(void); -extern void jz_time_init(void); static void __init jz_serial_setup(void) { @@ -57,7 +57,7 @@ static void __init jz_serial_setup(void) s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; s.iotype = SERIAL_IO_MEM; s.regshift = 2; - s.uartclk = JZ_EXTAL; + s.uartclk = jz4740_clock_bdata.ext_rate; s.line = 0; s.membase = (u8 *)UART0_BASE; diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/time.c b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/time.c index b811fcd..d9c5eba 100644 --- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/time.c +++ b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/time.c @@ -22,6 +22,7 @@ #include <asm/mach-jz4740/irq.h> #include <asm/mach-jz4740/jz4740.h> #include <asm/time.h> +#include "clock.h" #define JZ_REG_TIMER_STOP 0x1C #define JZ_REG_TIMER_STOP_SET 0x2C @@ -216,7 +217,6 @@ void __init plat_time_init(void) { int ret; uint32_t clk_rate; - struct clk *ext_clk; jz4740_timer_base = ioremap(CPHYSADDR(TCU_BASE), 0x100); @@ -225,13 +225,7 @@ void __init plat_time_init(void) return; } - /*ext_clk = clk_get(NULL, "ext"); - clk_rate = clk_get_rate(ext_clk) >> 4; - clk_put(ext_clk);*/ - - - clk_rate = JZ_EXTAL >> 4; - + clk_rate = jz4740_clock_bdata.ext_rate >> 4; jz4740_jiffies_per_tick = DIV_ROUND_CLOSEST(clk_rate, HZ); clockevent_set_clock(&jz4740_clockevent, clk_rate); |