summaryrefslogtreecommitdiff
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/brcm63xx/patches-3.8/001-spi-bcm63xx-reject-transfers-unable-to-transfer.patch (renamed from target/linux/brcm63xx/patches-3.8/106-spi-bcm63xx-reject-transfers-unable-to-transfer.patch)0
-rw-r--r--target/linux/brcm63xx/patches-3.8/002-spi-bcm63xx-fix-multi-transfer-messages.patch (renamed from target/linux/brcm63xx/patches-3.8/107-spi-bcm63xx-fix-multi-transfer-messages.patch)0
-rw-r--r--target/linux/brcm63xx/patches-3.8/003-spi-bcm63xx-Remove-unused-variable.patch25
-rw-r--r--target/linux/brcm63xx/patches-3.8/004-spi-bcm63xx-don-t-disable-non-enabled-clocks-in-prob.patch26
-rw-r--r--target/linux/brcm63xx/patches-3.8/005-spi-bcm63xx-properly-prepare-clocks-before-enabling-.patch61
-rw-r--r--target/linux/brcm63xx/patches-3.8/006-spi-bcm63xx-remove-duplicated-mode-bits-check.patch27
-rw-r--r--target/linux/brcm63xx/patches-3.8/007-spi-bcm63xx-remove-unneeded-debug-message.patch26
-rw-r--r--target/linux/brcm63xx/patches-3.8/008-spi-bcm63xx-remove-unused-variable-bs-from-bcm63xx_s.patch26
-rw-r--r--target/linux/brcm63xx/patches-3.8/009-spi-bcm63xx-check-spi-bits_per_word-in-spi_setup.patch29
-rw-r--r--target/linux/brcm63xx/patches-3.8/010-spi-bcm63xx-simplify-bcm63xx_spi_check_transfer.patch30
-rw-r--r--target/linux/brcm63xx/patches-3.8/011-spi-bcm63xx-remove-spi-chip-select-validity-check.patch28
-rw-r--r--target/linux/brcm63xx/patches-3.8/012-spi-bcm63xx-inline-bcm63xx_spi_check_transfer.patch48
-rw-r--r--target/linux/brcm63xx/patches-3.8/013-spi-bcm63xx-inline-hz-usage-in-bcm63xx_spi_setup_tra.patch43
-rw-r--r--target/linux/brcm63xx/patches-3.8/014-spi-bcm63xx-use-devm_ioremap_resource.patch36
-rw-r--r--target/linux/brcm63xx/patches-3.8/015-spi-bcm63xx-remove-unused-speed_hz-member-variable.patch67
-rw-r--r--target/linux/brcm63xx/patches-3.8/016-MIPS-BCM63XX-make-nvram-checksum-failure-non-fatal.patch (renamed from target/linux/brcm63xx/patches-3.8/119-MIPS-BCM63XX-make-nvram-checksum-failure-non-fatal.patch)15
-rw-r--r--target/linux/brcm63xx/patches-3.8/017-Revert-MIPS-BCM63XX-Call-board_register_device-from-.patch (renamed from target/linux/brcm63xx/patches-3.8/306-Revert-MIPS-BCM63XX-Call-board_register_device-from-.patch)19
-rw-r--r--target/linux/brcm63xx/patches-3.8/018-MIPS-BCM63XX-merge-bcm63xx_clk.h-into-bcm63xx-clk.c.patch57
-rw-r--r--target/linux/brcm63xx/patches-3.8/019-bcm63xx_enet-use-managed-io-memory-allocations.patch118
-rw-r--r--target/linux/brcm63xx/patches-3.8/020-bcm63xx_enet-use-managed-memory-allocations.patch42
-rw-r--r--target/linux/brcm63xx/patches-3.8/021-bcm63xx_enet-properly-prepare-unprepare-clocks-befor.patch62
-rw-r--r--target/linux/brcm63xx/patches-3.8/022-MIPS-BCM63XX-remove-duplicate-spi-register-definitio.patch166
-rw-r--r--target/linux/brcm63xx/patches-3.8/023-MIPS-BCM63XX-fix-revision-ID-width.patch68
-rw-r--r--target/linux/brcm63xx/patches-3.8/024-MIPS-BCM63XX-rework-chip-detection.patch133
-rw-r--r--target/linux/brcm63xx/patches-3.8/025-MIPS-BCM63XX-add-basic-BCM6362-support.patch (renamed from target/linux/brcm63xx/patches-3.8/312-MIPS-BCM63XX-add-basic-BCM6362-support.patch)89
-rw-r--r--target/linux/brcm63xx/patches-3.8/026-MIPS-BCM63XX-enable-SPI-controller-for-BCM6362.patch57
-rw-r--r--target/linux/brcm63xx/patches-3.8/027-MIPS-BCM63XX-enable-pcie-for-BCM6362.patch (renamed from target/linux/brcm63xx/patches-3.8/313-MIPS-BCM63XX-enable-pcie-for-BCM6362.patch)18
-rw-r--r--target/linux/brcm63xx/patches-3.8/028-MIPS-BCM63XX-add-flash-detection-for-BCM6362.patch38
-rw-r--r--target/linux/brcm63xx/patches-3.8/029-MIPS-BCM63XX-add-missing-clocks-for-BCM6328-and-BCM6.patch91
-rw-r--r--target/linux/brcm63xx/patches-3.8/030-MTD-bcm63xxpart-use-size-macro-for-CFE-block-size.patch29
-rw-r--r--target/linux/brcm63xx/patches-3.8/031-MIPS-BCM63XX-export-PSI-size-from-nvram.patch58
-rw-r--r--target/linux/brcm63xx/patches-3.8/032-MTD-bcm63xxpart-use-nvram-for-PSI-size.patch42
-rw-r--r--target/linux/brcm63xx/patches-3.8/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch (renamed from target/linux/brcm63xx/patches-3.8/108-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch)4
-rw-r--r--target/linux/brcm63xx/patches-3.8/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch (renamed from target/linux/brcm63xx/patches-3.8/109-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch)4
-rw-r--r--target/linux/brcm63xx/patches-3.8/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch (renamed from target/linux/brcm63xx/patches-3.8/110-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch)0
-rw-r--r--target/linux/brcm63xx/patches-3.8/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch (renamed from target/linux/brcm63xx/patches-3.8/111-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch)4
-rw-r--r--target/linux/brcm63xx/patches-3.8/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch (renamed from target/linux/brcm63xx/patches-3.8/112-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch)7
-rw-r--r--target/linux/brcm63xx/patches-3.8/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch (renamed from target/linux/brcm63xx/patches-3.8/113-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch)0
-rw-r--r--target/linux/brcm63xx/patches-3.8/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch (renamed from target/linux/brcm63xx/patches-3.8/114-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch)2
-rw-r--r--target/linux/brcm63xx/patches-3.8/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch (renamed from target/linux/brcm63xx/patches-3.8/115-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch)8
-rw-r--r--target/linux/brcm63xx/patches-3.8/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch (renamed from target/linux/brcm63xx/patches-3.8/116-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch)2
-rw-r--r--target/linux/brcm63xx/patches-3.8/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch (renamed from target/linux/brcm63xx/patches-3.8/117-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch)2
-rw-r--r--target/linux/brcm63xx/patches-3.8/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch (renamed from target/linux/brcm63xx/patches-3.8/118-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch)0
-rw-r--r--target/linux/brcm63xx/patches-3.8/305-MIPS-BCM63XX-allow-second-UART-on-BCM6328.patch (renamed from target/linux/brcm63xx/patches-3.8/307-MIPS-BCM63XX-allow-second-UART-on-BCM6328.patch)0
-rw-r--r--target/linux/brcm63xx/patches-3.8/306-MIPS-BCM63XX-expose-the-HS-SPI-clock.patch (renamed from target/linux/brcm63xx/patches-3.8/308-MIPS-BCM63XX-expose-the-HS-SPI-clock.patch)4
-rw-r--r--target/linux/brcm63xx/patches-3.8/307-MIPS-BCM63XX-add-HSSPI-register-definitions.patch (renamed from target/linux/brcm63xx/patches-3.8/309-MIPS-BCM63XX-add-HSSPI-register-definitions.patch)38
-rw-r--r--target/linux/brcm63xx/patches-3.8/308-board_leds_naming.patch (renamed from target/linux/brcm63xx/patches-3.8/310-board_leds_naming.patch)0
-rw-r--r--target/linux/brcm63xx/patches-3.8/309-cfe_version_mod.patch (renamed from target/linux/brcm63xx/patches-3.8/311-cfe_version_mod.patch)2
-rw-r--r--target/linux/brcm63xx/patches-3.8/400-bcm963xx_flashmap.patch (renamed from target/linux/brcm63xx/patches-3.8/404-bcm963xx_flashmap.patch)0
-rw-r--r--target/linux/brcm63xx/patches-3.8/401-bcm963xx_real_rootfs_length.patch (renamed from target/linux/brcm63xx/patches-3.8/405-bcm963xx_real_rootfs_length.patch)2
-rw-r--r--target/linux/brcm63xx/patches-3.8/402_bcm63xx_enet_vlan_incoming_fixed.patch (renamed from target/linux/brcm63xx/patches-3.8/406_bcm63xx_enet_vlan_incoming_fixed.patch)0
-rw-r--r--target/linux/brcm63xx/patches-3.8/403-6358-enet1-external-mii-clk.patch (renamed from target/linux/brcm63xx/patches-3.8/408-6358-enet1-external-mii-clk.patch)0
-rw-r--r--target/linux/brcm63xx/patches-3.8/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch (renamed from target/linux/brcm63xx/patches-3.8/410-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch)14
-rw-r--r--target/linux/brcm63xx/patches-3.8/405-bcm63xx_enet-implement-reset_autoneg-ethtool.patch (renamed from target/linux/brcm63xx/patches-3.8/411-bcm63xx_enet-implement-reset_autoneg-ethtool.patch)0
-rw-r--r--target/linux/brcm63xx/patches-3.8/406-bcm63xx_enet-split-dma-registers-access.patch (renamed from target/linux/brcm63xx/patches-3.8/414-bcm63xx_enet-split-dma-registers-access.patch)80
-rw-r--r--target/linux/brcm63xx/patches-3.8/407-bcm63xx_enet-add-support-for-bcm6368-internal-ethern.patch (renamed from target/linux/brcm63xx/patches-3.8/415-bcm63xx_enet-add-support-for-bcm6368-internal-ethern.patch)399
-rw-r--r--target/linux/brcm63xx/patches-3.8/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch (renamed from target/linux/brcm63xx/patches-3.8/422-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch)2
-rw-r--r--target/linux/brcm63xx/patches-3.8/409-MIPS-BCM63XX-add-HS-SPI-platform-device-and-register.patch (renamed from target/linux/brcm63xx/patches-3.8/425-MIPS-BCM63XX-add-HS-SPI-platform-device-and-register.patch)12
-rw-r--r--target/linux/brcm63xx/patches-3.8/410-SPI-MIPS-BCM63XX-Add-HS-SPI-driver.patch (renamed from target/linux/brcm63xx/patches-3.8/426-SPI-MIPS-BCM63XX-Add-HS-SPI-driver.patch)4
-rw-r--r--target/linux/brcm63xx/patches-3.8/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch (renamed from target/linux/brcm63xx/patches-3.8/427-MIPS-BCM63XX-Register-SPI-flash-if-present.patch)8
-rw-r--r--target/linux/brcm63xx/patches-3.8/412-MTD-physmap-allow-passing-pp_data.patch (renamed from target/linux/brcm63xx/patches-3.8/431-MTD-physmap-allow-passing-pp_data.patch)0
-rw-r--r--target/linux/brcm63xx/patches-3.8/412-bcm63xx_enet-use-resource_size.patch69
-rw-r--r--target/linux/brcm63xx/patches-3.8/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch (renamed from target/linux/brcm63xx/patches-3.8/432-BCM63XX-allow-providing-fixup-data-in-board-data.patch)0
-rw-r--r--target/linux/brcm63xx/patches-3.8/413-bcm63xx_enet-disable-clock-when-uninitializing-devic.patch20
-rw-r--r--target/linux/brcm63xx/patches-3.8/414-MTD-m25p80-allow-passing-pp_data.patch (renamed from target/linux/brcm63xx/patches-3.8/433-MTD-m25p80-allow-passing-pp_data.patch)0
-rw-r--r--target/linux/brcm63xx/patches-3.8/415-MIPS-BCM63XX-store-the-flash-type-in-global-variable.patch (renamed from target/linux/brcm63xx/patches-3.8/434-MIPS-BCM63XX-store-the-flash-type-in-global-variable.patch)10
-rw-r--r--target/linux/brcm63xx/patches-3.8/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch (renamed from target/linux/brcm63xx/patches-3.8/435-BCM63XX-add-a-fixup-for-ath9k-devices.patch)0
-rw-r--r--target/linux/brcm63xx/patches-3.8/416-bcm63xx_enet-reset-port-link-state-in-bcm_enetsw_ope.patch28
-rw-r--r--target/linux/brcm63xx/patches-3.8/417-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch (renamed from target/linux/brcm63xx/patches-3.8/436-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch)12
-rw-r--r--target/linux/brcm63xx/patches-3.8/417-bcm63xx_enet-don-t-overwrite-settings-when-setting-d.patch20
-rw-r--r--target/linux/brcm63xx/patches-3.8/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch (renamed from target/linux/brcm63xx/patches-3.8/437-MIPS-BCM63XX-pass-caldata-info-to-flash.patch)2
-rw-r--r--target/linux/brcm63xx/patches-3.8/418-bcm63xx_enet-store-the-number-of-ports-instead-of-ha.patch98
-rw-r--r--target/linux/brcm63xx/patches-3.8/419-MIPS-BCM63XX-enable-enet-for-BCM6345.patch (renamed from target/linux/brcm63xx/patches-3.8/443-MIPS-BCM63XX-enable-enet-for-BCM6345.patch)24
-rw-r--r--target/linux/brcm63xx/patches-3.8/419-bcm63xx_enet-store-is_sw-in-a-variable-instead-of-ch.patch73
-rw-r--r--target/linux/brcm63xx/patches-3.8/420-BCM63XX-add-endian-check-for-ath9k.patch (renamed from target/linux/brcm63xx/patches-3.8/444-BCM63XX-add-endian-check-for-ath9k.patch)0
-rw-r--r--target/linux/brcm63xx/patches-3.8/420-BCM63XX-allow-enetsw-without-tx-irq.patch69
-rw-r--r--target/linux/brcm63xx/patches-3.8/421-BCM63XX-add-led-pin-for-ath9k.patch (renamed from target/linux/brcm63xx/patches-3.8/445-BCM63XX-add-led-pin-for-ath9k.patch)0
-rw-r--r--target/linux/brcm63xx/patches-3.8/421-BCM63XX-use-port-id-for-deciding-external-phy.patch87
-rw-r--r--target/linux/brcm63xx/patches-3.8/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch (renamed from target/linux/brcm63xx/patches-3.8/446-BCM63XX-add-a-fixup-for-rt2x00-devices.patch)2
-rw-r--r--target/linux/brcm63xx/patches-3.8/423-bcm63xx_enet-fix-lockup-on-BCM6328.patch93
-rw-r--r--target/linux/brcm63xx/patches-3.8/423-bcm63xx_enet_add_b53_support.patch (renamed from target/linux/brcm63xx/patches-3.8/447-bcm63xx_enet_add_b53_support.patch)12
-rw-r--r--target/linux/brcm63xx/patches-3.8/424-MIPS-BCM63XX-add-support-for-BCM6328-in-bcm_enetsw.patch79
-rw-r--r--target/linux/brcm63xx/patches-3.8/428-MIPS-BCM63XX-add-flash-detection-for-BCM6362.patch50
-rw-r--r--target/linux/brcm63xx/patches-3.8/429-MIPS-BCM63XX-export-PSI-size-from-nvram.patch44
-rw-r--r--target/linux/brcm63xx/patches-3.8/430-MTD-bcm63xxpart-use-nvram-for-PSI-size.patch29
-rw-r--r--target/linux/brcm63xx/patches-3.8/439-MIPS-BCM63XX-wire-up-the-HS-SPI-controller-for-BCM63.patch56
-rw-r--r--target/linux/brcm63xx/patches-3.8/440-MIPS-BCM63XX-enable-SPI-controller-for-BCM6362.patch101
-rw-r--r--target/linux/brcm63xx/patches-3.8/441-MIPS-BCM63XX-enable-USB-for-BCM6362.patch71
-rw-r--r--target/linux/brcm63xx/patches-3.8/442-MIPS-BCM63XX-enable-enetsw-for-BCM6362.patch67
-rw-r--r--target/linux/brcm63xx/patches-3.8/511-board_V2500V.patch2
-rw-r--r--target/linux/brcm63xx/patches-3.8/533-board_rta770bw.patch (renamed from target/linux/brcm63xx/patches-3.8/553-board_rta770bw.patch)2
-rw-r--r--target/linux/brcm63xx/patches-3.8/534-board_hw556.patch (renamed from target/linux/brcm63xx/patches-3.8/554-board_hw556.patch)10
-rw-r--r--target/linux/brcm63xx/patches-3.8/535-board_rta770w.patch (renamed from target/linux/brcm63xx/patches-3.8/556-board_rta770w.patch)4
-rw-r--r--target/linux/brcm63xx/patches-3.8/550-alice_gate2_leds.patch2
-rw-r--r--target/linux/brcm63xx/patches-3.8/551-96348gw_a_leds.patch2
-rw-r--r--target/linux/brcm63xx/patches-3.8/552-board_96348gw-10_reset_button.patch2
-rw-r--r--target/linux/brcm63xx/patches-3.8/553-boards_probe_switch.patch (renamed from target/linux/brcm63xx/patches-3.8/555-boards_probe_switch.patch)22
-rw-r--r--target/linux/brcm63xx/patches-3.8/800-wl_exports.patch4
98 files changed, 1871 insertions, 1467 deletions
diff --git a/target/linux/brcm63xx/patches-3.8/106-spi-bcm63xx-reject-transfers-unable-to-transfer.patch b/target/linux/brcm63xx/patches-3.8/001-spi-bcm63xx-reject-transfers-unable-to-transfer.patch
index 8726b19..8726b19 100644
--- a/target/linux/brcm63xx/patches-3.8/106-spi-bcm63xx-reject-transfers-unable-to-transfer.patch
+++ b/target/linux/brcm63xx/patches-3.8/001-spi-bcm63xx-reject-transfers-unable-to-transfer.patch
diff --git a/target/linux/brcm63xx/patches-3.8/107-spi-bcm63xx-fix-multi-transfer-messages.patch b/target/linux/brcm63xx/patches-3.8/002-spi-bcm63xx-fix-multi-transfer-messages.patch
index 85b8524..85b8524 100644
--- a/target/linux/brcm63xx/patches-3.8/107-spi-bcm63xx-fix-multi-transfer-messages.patch
+++ b/target/linux/brcm63xx/patches-3.8/002-spi-bcm63xx-fix-multi-transfer-messages.patch
diff --git a/target/linux/brcm63xx/patches-3.8/003-spi-bcm63xx-Remove-unused-variable.patch b/target/linux/brcm63xx/patches-3.8/003-spi-bcm63xx-Remove-unused-variable.patch
new file mode 100644
index 0000000..beda129
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/003-spi-bcm63xx-Remove-unused-variable.patch
@@ -0,0 +1,25 @@
+From 2a26efda4d16f7d25f1c55e5c387fa3d7d18e9af Mon Sep 17 00:00:00 2001
+From: Kevin Cernekee <cernekee@gmail.com>
+Date: Sat, 14 Jul 2012 23:25:03 -0700
+Subject: [PATCH 01/12] spi/bcm63xx: Remove unused variable
+
+This fixes the following warning:
+
+drivers/spi/spi-bcm63xx.c: In function 'bcm63xx_spi_setup':
+drivers/spi/spi-bcm63xx.c:157:6: warning: unused variable 'ret'
+
+Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
+---
+ drivers/spi/spi-bcm63xx.c | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/drivers/spi/spi-bcm63xx.c
++++ b/drivers/spi/spi-bcm63xx.c
+@@ -152,7 +152,6 @@ static void bcm63xx_spi_setup_transfer(s
+ static int bcm63xx_spi_setup(struct spi_device *spi)
+ {
+ struct bcm63xx_spi *bs;
+- int ret;
+
+ bs = spi_master_get_devdata(spi->master);
+
diff --git a/target/linux/brcm63xx/patches-3.8/004-spi-bcm63xx-don-t-disable-non-enabled-clocks-in-prob.patch b/target/linux/brcm63xx/patches-3.8/004-spi-bcm63xx-don-t-disable-non-enabled-clocks-in-prob.patch
new file mode 100644
index 0000000..0a03707
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/004-spi-bcm63xx-don-t-disable-non-enabled-clocks-in-prob.patch
@@ -0,0 +1,26 @@
+From f32b46ec9c307753e2418a0f5df1b5cd066b1394 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 11 Mar 2013 13:27:43 +0100
+Subject: [PATCH 02/12] spi/bcm63xx: don't disable non enabled clocks in probe
+ error path
+
+When msg_ctl_width is set to an invalid value we try to disable the
+clock despite it never being enabled. Fix it by jumping to the correct
+label.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/spi/spi-bcm63xx.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/spi/spi-bcm63xx.c
++++ b/drivers/spi/spi-bcm63xx.c
+@@ -489,7 +489,7 @@ static int bcm63xx_spi_probe(struct plat
+ default:
+ dev_err(dev, "unsupported MSG_CTL width: %d\n",
+ bs->msg_ctl_width);
+- goto out_clk_disable;
++ goto out_err;
+ }
+
+ /* Initialize hardware */
diff --git a/target/linux/brcm63xx/patches-3.8/005-spi-bcm63xx-properly-prepare-clocks-before-enabling-.patch b/target/linux/brcm63xx/patches-3.8/005-spi-bcm63xx-properly-prepare-clocks-before-enabling-.patch
new file mode 100644
index 0000000..b75a57c
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/005-spi-bcm63xx-properly-prepare-clocks-before-enabling-.patch
@@ -0,0 +1,61 @@
+From e504d3ed9b35f43e61cf239b103667d87cd7bf3c Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 10 Sep 2012 01:26:55 +0200
+Subject: [PATCH 03/12] spi/bcm63xx: properly prepare clocks before enabling
+ them
+
+Use proper clk_prepare/unprepare calls in preparation for switching
+to the generic clock framework.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/spi/spi-bcm63xx.c | 10 +++++-----
+ 1 file changed, 5 insertions(+), 5 deletions(-)
+
+--- a/drivers/spi/spi-bcm63xx.c
++++ b/drivers/spi/spi-bcm63xx.c
+@@ -493,7 +493,7 @@ static int bcm63xx_spi_probe(struct plat
+ }
+
+ /* Initialize hardware */
+- clk_enable(bs->clk);
++ clk_prepare_enable(bs->clk);
+ bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
+
+ /* register and we are done */
+@@ -509,7 +509,7 @@ static int bcm63xx_spi_probe(struct plat
+ return 0;
+
+ out_clk_disable:
+- clk_disable(clk);
++ clk_disable_unprepare(clk);
+ out_err:
+ platform_set_drvdata(pdev, NULL);
+ spi_master_put(master);
+@@ -530,7 +530,7 @@ static int bcm63xx_spi_remove(struct pla
+ bcm_spi_writeb(bs, 0, SPI_INT_MASK);
+
+ /* HW shutdown */
+- clk_disable(bs->clk);
++ clk_disable_unprepare(bs->clk);
+ clk_put(bs->clk);
+
+ platform_set_drvdata(pdev, 0);
+@@ -549,7 +549,7 @@ static int bcm63xx_spi_suspend(struct de
+
+ spi_master_suspend(master);
+
+- clk_disable(bs->clk);
++ clk_disable_unprepare(bs->clk);
+
+ return 0;
+ }
+@@ -560,7 +560,7 @@ static int bcm63xx_spi_resume(struct dev
+ platform_get_drvdata(to_platform_device(dev));
+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
+
+- clk_enable(bs->clk);
++ clk_prepare_enable(bs->clk);
+
+ spi_master_resume(master);
+
diff --git a/target/linux/brcm63xx/patches-3.8/006-spi-bcm63xx-remove-duplicated-mode-bits-check.patch b/target/linux/brcm63xx/patches-3.8/006-spi-bcm63xx-remove-duplicated-mode-bits-check.patch
new file mode 100644
index 0000000..d387300
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/006-spi-bcm63xx-remove-duplicated-mode-bits-check.patch
@@ -0,0 +1,27 @@
+From 3abf34d4e0460bb098fabe3cc8207108bae1905a Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 11 Mar 2013 13:40:26 +0100
+Subject: [PATCH 04/12] spi/bcm63xx: remove duplicated mode bits check
+
+The spi subsystem already checks the mode bits before calling setup.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/spi/spi-bcm63xx.c | 6 ------
+ 1 file changed, 6 deletions(-)
+
+--- a/drivers/spi/spi-bcm63xx.c
++++ b/drivers/spi/spi-bcm63xx.c
+@@ -158,12 +158,6 @@ static int bcm63xx_spi_setup(struct spi_
+ if (!spi->bits_per_word)
+ spi->bits_per_word = 8;
+
+- if (spi->mode & ~MODEBITS) {
+- dev_err(&spi->dev, "%s, unsupported mode bits %x\n",
+- __func__, spi->mode & ~MODEBITS);
+- return -EINVAL;
+- }
+-
+ dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
+ __func__, spi->mode & MODEBITS, spi->bits_per_word, 0);
+
diff --git a/target/linux/brcm63xx/patches-3.8/007-spi-bcm63xx-remove-unneeded-debug-message.patch b/target/linux/brcm63xx/patches-3.8/007-spi-bcm63xx-remove-unneeded-debug-message.patch
new file mode 100644
index 0000000..a7fae94
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/007-spi-bcm63xx-remove-unneeded-debug-message.patch
@@ -0,0 +1,26 @@
+From ee18b0ac561afb9dd7d87a4217e80151a7e29dfc Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 11 Mar 2013 13:42:22 +0100
+Subject: [PATCH 05/12] spi/bcm63xx: remove unneeded debug message
+
+The spi subsystem already provides this info in a more extensive
+debug print except for the nsecs/bit - which wasn't calculated anyway
+and fixed to 0.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/spi/spi-bcm63xx.c | 3 ---
+ 1 file changed, 3 deletions(-)
+
+--- a/drivers/spi/spi-bcm63xx.c
++++ b/drivers/spi/spi-bcm63xx.c
+@@ -158,9 +158,6 @@ static int bcm63xx_spi_setup(struct spi_
+ if (!spi->bits_per_word)
+ spi->bits_per_word = 8;
+
+- dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
+- __func__, spi->mode & MODEBITS, spi->bits_per_word, 0);
+-
+ return 0;
+ }
+
diff --git a/target/linux/brcm63xx/patches-3.8/008-spi-bcm63xx-remove-unused-variable-bs-from-bcm63xx_s.patch b/target/linux/brcm63xx/patches-3.8/008-spi-bcm63xx-remove-unused-variable-bs-from-bcm63xx_s.patch
new file mode 100644
index 0000000..81ea919
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/008-spi-bcm63xx-remove-unused-variable-bs-from-bcm63xx_s.patch
@@ -0,0 +1,26 @@
+From 30151fe21befa84d9cd27d63f1bf3973988c811e Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 11 Mar 2013 13:47:19 +0100
+Subject: [PATCH 06/12] spi/bcm63xx: remove unused variable bs from
+ bcm63xx_spi_setup
+
+It is only written, but never read.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/spi/spi-bcm63xx.c | 4 ----
+ 1 file changed, 4 deletions(-)
+
+--- a/drivers/spi/spi-bcm63xx.c
++++ b/drivers/spi/spi-bcm63xx.c
+@@ -151,10 +151,6 @@ static void bcm63xx_spi_setup_transfer(s
+
+ static int bcm63xx_spi_setup(struct spi_device *spi)
+ {
+- struct bcm63xx_spi *bs;
+-
+- bs = spi_master_get_devdata(spi->master);
+-
+ if (!spi->bits_per_word)
+ spi->bits_per_word = 8;
+
diff --git a/target/linux/brcm63xx/patches-3.8/009-spi-bcm63xx-check-spi-bits_per_word-in-spi_setup.patch b/target/linux/brcm63xx/patches-3.8/009-spi-bcm63xx-check-spi-bits_per_word-in-spi_setup.patch
new file mode 100644
index 0000000..49a7ac2
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/009-spi-bcm63xx-check-spi-bits_per_word-in-spi_setup.patch
@@ -0,0 +1,29 @@
+From 13a364be644ed9b4666d452756556bb98afdcc56 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 11 Mar 2013 13:48:27 +0100
+Subject: [PATCH 07/12] spi/bcm63xx: check spi bits_per_word in spi_setup
+
+Instead of fixing up the bits_per_word (which the spi subsystem already
+does for us), check it for supported values.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/spi/spi-bcm63xx.c | 7 +++++--
+ 1 file changed, 5 insertions(+), 2 deletions(-)
+
+--- a/drivers/spi/spi-bcm63xx.c
++++ b/drivers/spi/spi-bcm63xx.c
+@@ -151,8 +151,11 @@ static void bcm63xx_spi_setup_transfer(s
+
+ static int bcm63xx_spi_setup(struct spi_device *spi)
+ {
+- if (!spi->bits_per_word)
+- spi->bits_per_word = 8;
++ if (spi->bits_per_word != 8) {
++ dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
++ __func__, spi->bits_per_word);
++ return -EINVAL;
++ }
+
+ return 0;
+ }
diff --git a/target/linux/brcm63xx/patches-3.8/010-spi-bcm63xx-simplify-bcm63xx_spi_check_transfer.patch b/target/linux/brcm63xx/patches-3.8/010-spi-bcm63xx-simplify-bcm63xx_spi_check_transfer.patch
new file mode 100644
index 0000000..57c1e46
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/010-spi-bcm63xx-simplify-bcm63xx_spi_check_transfer.patch
@@ -0,0 +1,30 @@
+From d69ac73da38f0d16cc6b4524cd734b907db6eab8 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 11 Mar 2013 13:51:10 +0100
+Subject: [PATCH 08/12] spi/bcm63xx: simplify bcm63xx_spi_check_transfer
+
+bcm63xx_spi_check_transfer is only called from one place that has
+t always set, so directly check the transfer's bits_per_word.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/spi/spi-bcm63xx.c | 7 ++-----
+ 1 file changed, 2 insertions(+), 5 deletions(-)
+
+--- a/drivers/spi/spi-bcm63xx.c
++++ b/drivers/spi/spi-bcm63xx.c
+@@ -96,12 +96,9 @@ static const unsigned bcm63xx_spi_freq_t
+ static int bcm63xx_spi_check_transfer(struct spi_device *spi,
+ struct spi_transfer *t)
+ {
+- u8 bits_per_word;
+-
+- bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
+- if (bits_per_word != 8) {
++ if (t->bits_per_word != 8) {
+ dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
+- __func__, bits_per_word);
++ __func__, t->bits_per_word);
+ return -EINVAL;
+ }
+
diff --git a/target/linux/brcm63xx/patches-3.8/011-spi-bcm63xx-remove-spi-chip-select-validity-check.patch b/target/linux/brcm63xx/patches-3.8/011-spi-bcm63xx-remove-spi-chip-select-validity-check.patch
new file mode 100644
index 0000000..4f1a1cc
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/011-spi-bcm63xx-remove-spi-chip-select-validity-check.patch
@@ -0,0 +1,28 @@
+From 9c5a988562468823a5e2973f04134a8bd97e7718 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 11 Mar 2013 13:53:16 +0100
+Subject: [PATCH 09/12] spi/bcm63xx: remove spi chip select validity check
+
+The check would belong in bcm63xx_spi_setup if the spi subsystem
+weren't already doing the check for us, so just drop it.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/spi/spi-bcm63xx.c | 6 ------
+ 1 file changed, 6 deletions(-)
+
+--- a/drivers/spi/spi-bcm63xx.c
++++ b/drivers/spi/spi-bcm63xx.c
+@@ -102,12 +102,6 @@ static int bcm63xx_spi_check_transfer(st
+ return -EINVAL;
+ }
+
+- if (spi->chip_select > spi->master->num_chipselect) {
+- dev_err(&spi->dev, "%s, unsupported slave %d\n",
+- __func__, spi->chip_select);
+- return -EINVAL;
+- }
+-
+ return 0;
+ }
+
diff --git a/target/linux/brcm63xx/patches-3.8/012-spi-bcm63xx-inline-bcm63xx_spi_check_transfer.patch b/target/linux/brcm63xx/patches-3.8/012-spi-bcm63xx-inline-bcm63xx_spi_check_transfer.patch
new file mode 100644
index 0000000..f684d83
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/012-spi-bcm63xx-inline-bcm63xx_spi_check_transfer.patch
@@ -0,0 +1,48 @@
+From 3fffc5f76c830c375692a67948734168ee4c516a Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 11 Mar 2013 13:59:30 +0100
+Subject: [PATCH 10/12] spi/bcm63xx: inline bcm63xx_spi_check_transfer
+
+It only does one check, so just do the check directly in the caller.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/spi/spi-bcm63xx.c | 19 +++++--------------
+ 1 file changed, 5 insertions(+), 14 deletions(-)
+
+--- a/drivers/spi/spi-bcm63xx.c
++++ b/drivers/spi/spi-bcm63xx.c
+@@ -93,18 +93,6 @@ static const unsigned bcm63xx_spi_freq_t
+ { 391000, SPI_CLK_0_391MHZ }
+ };
+
+-static int bcm63xx_spi_check_transfer(struct spi_device *spi,
+- struct spi_transfer *t)
+-{
+- if (t->bits_per_word != 8) {
+- dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
+- __func__, t->bits_per_word);
+- return -EINVAL;
+- }
+-
+- return 0;
+-}
+-
+ static void bcm63xx_spi_setup_transfer(struct spi_device *spi,
+ struct spi_transfer *t)
+ {
+@@ -293,9 +281,12 @@ static int bcm63xx_spi_transfer_one(stru
+ * full-duplex transfers.
+ */
+ list_for_each_entry(t, &m->transfers, transfer_list) {
+- status = bcm63xx_spi_check_transfer(spi, t);
+- if (status < 0)
++ if (t->bits_per_word != 8) {
++ dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
++ __func__, t->bits_per_word);
++ status = -EINVAL;
+ goto exit;
++ }
+
+ if (!first)
+ first = t;
diff --git a/target/linux/brcm63xx/patches-3.8/013-spi-bcm63xx-inline-hz-usage-in-bcm63xx_spi_setup_tra.patch b/target/linux/brcm63xx/patches-3.8/013-spi-bcm63xx-inline-hz-usage-in-bcm63xx_spi_setup_tra.patch
new file mode 100644
index 0000000..fba37d5
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/013-spi-bcm63xx-inline-hz-usage-in-bcm63xx_spi_setup_tra.patch
@@ -0,0 +1,43 @@
+From 2646be877afc663d1688a2add8386b027c9d7e31 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 11 Mar 2013 14:08:06 +0100
+Subject: [PATCH 11/12] spi/bcm63xx: inline hz usage in
+ bcm63xx_spi_setup_transfer
+
+bcm63xx_spi_setup_transfer is called from only one place, and that has
+t always set, to hz will always be t->speed_hz - just use it directly in
+the two places instead of moving it in a local variable.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/spi/spi-bcm63xx.c | 7 ++-----
+ 1 file changed, 2 insertions(+), 5 deletions(-)
+
+--- a/drivers/spi/spi-bcm63xx.c
++++ b/drivers/spi/spi-bcm63xx.c
+@@ -97,15 +97,12 @@ static void bcm63xx_spi_setup_transfer(s
+ struct spi_transfer *t)
+ {
+ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
+- u32 hz;
+ u8 clk_cfg, reg;
+ int i;
+
+- hz = (t) ? t->speed_hz : spi->max_speed_hz;
+-
+ /* Find the closest clock configuration */
+ for (i = 0; i < SPI_CLK_MASK; i++) {
+- if (hz >= bcm63xx_spi_freq_table[i][0]) {
++ if (t->speed_hz >= bcm63xx_spi_freq_table[i][0]) {
+ clk_cfg = bcm63xx_spi_freq_table[i][1];
+ break;
+ }
+@@ -122,7 +119,7 @@ static void bcm63xx_spi_setup_transfer(s
+
+ bcm_spi_writeb(bs, reg, SPI_CLK_CFG);
+ dev_dbg(&spi->dev, "Setting clock register to %02x (hz %d)\n",
+- clk_cfg, hz);
++ clk_cfg, t->speed_hz);
+ }
+
+ /* the spi->mode bits understood by this driver: */
diff --git a/target/linux/brcm63xx/patches-3.8/014-spi-bcm63xx-use-devm_ioremap_resource.patch b/target/linux/brcm63xx/patches-3.8/014-spi-bcm63xx-use-devm_ioremap_resource.patch
new file mode 100644
index 0000000..82fbe6c
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/014-spi-bcm63xx-use-devm_ioremap_resource.patch
@@ -0,0 +1,36 @@
+From 95af2d7751d31ea07b7a0d8ec7030f6c62df0ae2 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 11 Mar 2013 14:20:33 +0100
+Subject: [PATCH 12/12] spi/bcm63xx: use devm_ioremap_resource()
+
+Use devm_ioremap_resource() which provides its own error messages.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/spi/spi-bcm63xx.c | 15 +++------------
+ 1 file changed, 3 insertions(+), 12 deletions(-)
+
+--- a/drivers/spi/spi-bcm63xx.c
++++ b/drivers/spi/spi-bcm63xx.c
+@@ -412,18 +412,9 @@ static int bcm63xx_spi_probe(struct plat
+ platform_set_drvdata(pdev, master);
+ bs->pdev = pdev;
+
+- if (!devm_request_mem_region(&pdev->dev, r->start,
+- resource_size(r), PFX)) {
+- dev_err(dev, "iomem request failed\n");
+- ret = -ENXIO;
+- goto out_err;
+- }
+-
+- bs->regs = devm_ioremap_nocache(&pdev->dev, r->start,
+- resource_size(r));
+- if (!bs->regs) {
+- dev_err(dev, "unable to ioremap regs\n");
+- ret = -ENOMEM;
++ bs->regs = devm_ioremap_resource(&pdev->dev, r);
++ if (IS_ERR(bs->regs)) {
++ ret = PTR_ERR(bs->regs);
+ goto out_err;
+ }
+
diff --git a/target/linux/brcm63xx/patches-3.8/015-spi-bcm63xx-remove-unused-speed_hz-member-variable.patch b/target/linux/brcm63xx/patches-3.8/015-spi-bcm63xx-remove-unused-speed_hz-member-variable.patch
new file mode 100644
index 0000000..d7b9327
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/015-spi-bcm63xx-remove-unused-speed_hz-member-variable.patch
@@ -0,0 +1,67 @@
+From 5ff6b05a18295fa7e03de0fdf32d681a90b69df5 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 30 Mar 2013 10:26:55 +0100
+Subject: [PATCH] spi/bcm63xx: remove unused speed_hz member variable
+
+speed_hz is a write only member, so we can safely remove it and its
+generation. Also fixes the missing clk_put after getting the periph
+clock.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-spi.c | 11 -----------
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h | 1 -
+ drivers/spi/spi-bcm63xx.c | 2 --
+ 3 files changed, 14 deletions(-)
+
+--- a/arch/mips/bcm63xx/dev-spi.c
++++ b/arch/mips/bcm63xx/dev-spi.c
+@@ -85,20 +85,9 @@ static struct platform_device bcm63xx_sp
+
+ int __init bcm63xx_spi_register(void)
+ {
+- struct clk *periph_clk;
+-
+ if (BCMCPU_IS_6328() || BCMCPU_IS_6345())
+ return -ENODEV;
+
+- periph_clk = clk_get(NULL, "periph");
+- if (IS_ERR(periph_clk)) {
+- pr_err("unable to get periph clock\n");
+- return -ENODEV;
+- }
+-
+- /* Set bus frequency */
+- spi_pdata.speed_hz = clk_get_rate(periph_clk);
+-
+ spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
+ spi_resources[0].end = spi_resources[0].start;
+ spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
+@@ -13,7 +13,6 @@ struct bcm63xx_spi_pdata {
+ unsigned int msg_ctl_width;
+ int bus_num;
+ int num_chipselect;
+- u32 speed_hz;
+ };
+
+ enum bcm63xx_regs_spi {
+--- a/drivers/spi/spi-bcm63xx.c
++++ b/drivers/spi/spi-bcm63xx.c
+@@ -46,7 +46,6 @@ struct bcm63xx_spi {
+ int irq;
+
+ /* Platform data */
+- u32 speed_hz;
+ unsigned fifo_size;
+ unsigned int msg_type_shift;
+ unsigned int msg_ctl_width;
+@@ -436,7 +435,6 @@ static int bcm63xx_spi_probe(struct plat
+ master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer;
+ master->transfer_one_message = bcm63xx_spi_transfer_one;
+ master->mode_bits = MODEBITS;
+- bs->speed_hz = pdata->speed_hz;
+ bs->msg_type_shift = pdata->msg_type_shift;
+ bs->msg_ctl_width = pdata->msg_ctl_width;
+ bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
diff --git a/target/linux/brcm63xx/patches-3.8/119-MIPS-BCM63XX-make-nvram-checksum-failure-non-fatal.patch b/target/linux/brcm63xx/patches-3.8/016-MIPS-BCM63XX-make-nvram-checksum-failure-non-fatal.patch
index 3486c00..53161a9 100644
--- a/target/linux/brcm63xx/patches-3.8/119-MIPS-BCM63XX-make-nvram-checksum-failure-non-fatal.patch
+++ b/target/linux/brcm63xx/patches-3.8/016-MIPS-BCM63XX-make-nvram-checksum-failure-non-fatal.patch
@@ -1,14 +1,21 @@
-From 5e6669fe7487c58b123da1df5c2d95db43185264 Mon Sep 17 00:00:00 2001
+From 152addd3a965759b69fbdb9a76526f1f5070bc9a Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Tue, 12 Feb 2013 22:00:10 +0100
Subject: [PATCH] MIPS: BCM63XX: make nvram checksum failure non fatal
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
Some vendors modify the nvram layout moving the checksum to a different
-place or drop it entirely, so reduce the checksum failure to a warning.
+place or dropping entirely, so reduce the checksum failure to a warning.
Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
+
+I'm not sure if it should be that "loud" (pr_warn) because users can't
+actually do anything to fix it, so maybe pr_debug would be fine, too.
+
arch/mips/bcm63xx/boards/board_bcm963xx.c | 5 +----
arch/mips/bcm63xx/nvram.c | 7 +++----
arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h | 4 +---
@@ -16,7 +23,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -747,10 +747,7 @@ void __init board_prom_init(void)
+@@ -745,10 +745,7 @@ void __init board_prom_init(void)
strcpy(cfe_version, "unknown");
printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
@@ -46,7 +53,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
- return -EINVAL;
-
- return 0;
-+ pr_warn("nvram checksum invalid (expected %08x, actual %08x)\n",
++ pr_warn("nvram checksum failed, contents may be invalid (expected %08x, got %08x)\n",
+ expected_crc, crc);
}
diff --git a/target/linux/brcm63xx/patches-3.8/306-Revert-MIPS-BCM63XX-Call-board_register_device-from-.patch b/target/linux/brcm63xx/patches-3.8/017-Revert-MIPS-BCM63XX-Call-board_register_device-from-.patch
index aa7ef8b..584bc48 100644
--- a/target/linux/brcm63xx/patches-3.8/306-Revert-MIPS-BCM63XX-Call-board_register_device-from-.patch
+++ b/target/linux/brcm63xx/patches-3.8/017-Revert-MIPS-BCM63XX-Call-board_register_device-from-.patch
@@ -1,17 +1,24 @@
-From a7d2622b6614fdca504c074a0cd307d5a1165c30 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
+From 76d82677cb010b28346aa4c7aa9d36d94916392b Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
Date: Tue, 8 May 2012 09:39:01 +0200
-Subject: [PATCH 04/59] Revert "MIPS: BCM63XX: Call board_register_device from device_initcall()"
+Subject: [PATCH] Revert "MIPS: BCM63XX: Call board_register_device from
+ device_initcall()"
This commit causes a race between PCI scan and SSB fallback SPROM handler
registration, causing the wifi to not work on slower systems. The only
-subsystem touched from board_register_device is platform device
-registration, which should be safe as an arch init call.
+subsystem touched from board_register_devices is platform device
+registration, which is safe as an arch init call.
This reverts commit d64ed7ada2f689d2c62af1892ca55e47d3653e36.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
+
+This patch is in OpenWrt since ages, and we never encountered any issues
+from this revert.
+
arch/mips/bcm63xx/setup.c | 2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
+ 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/bcm63xx/setup.c
+++ b/arch/mips/bcm63xx/setup.c
diff --git a/target/linux/brcm63xx/patches-3.8/018-MIPS-BCM63XX-merge-bcm63xx_clk.h-into-bcm63xx-clk.c.patch b/target/linux/brcm63xx/patches-3.8/018-MIPS-BCM63XX-merge-bcm63xx_clk.h-into-bcm63xx-clk.c.patch
new file mode 100644
index 0000000..c3dedb4
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/018-MIPS-BCM63XX-merge-bcm63xx_clk.h-into-bcm63xx-clk.c.patch
@@ -0,0 +1,57 @@
+From 715d03e5409fac9cbe76fd802db49ca15158378f Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 30 Mar 2013 20:31:48 +0100
+Subject: [PATCH] MIPS: BCM63XX: merge bcm63xx_clk.h into bcm63xx/clk.c
+
+All the header file does is provide the internal structure of clk,
+which shouldn't be used by anyone except clk.c itself anyway.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/clk.c | 8 +++++++-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h | 11 -----------
+ drivers/tty/serial/bcm63xx_uart.c | 1 -
+ 3 files changed, 7 insertions(+), 13 deletions(-)
+ delete mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h
+
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -15,7 +15,13 @@
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_regs.h>
+ #include <bcm63xx_reset.h>
+-#include <bcm63xx_clk.h>
++
++struct clk {
++ void (*set)(struct clk *, int);
++ unsigned int rate;
++ unsigned int usage;
++ int id;
++};
+
+ static DEFINE_MUTEX(clocks_mutex);
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h
++++ /dev/null
+@@ -1,11 +0,0 @@
+-#ifndef BCM63XX_CLK_H_
+-#define BCM63XX_CLK_H_
+-
+-struct clk {
+- void (*set)(struct clk *, int);
+- unsigned int rate;
+- unsigned int usage;
+- int id;
+-};
+-
+-#endif /* ! BCM63XX_CLK_H_ */
+--- a/drivers/tty/serial/bcm63xx_uart.c
++++ b/drivers/tty/serial/bcm63xx_uart.c
+@@ -30,7 +30,6 @@
+ #include <linux/serial.h>
+ #include <linux/serial_core.h>
+
+-#include <bcm63xx_clk.h>
+ #include <bcm63xx_irq.h>
+ #include <bcm63xx_regs.h>
+ #include <bcm63xx_io.h>
diff --git a/target/linux/brcm63xx/patches-3.8/019-bcm63xx_enet-use-managed-io-memory-allocations.patch b/target/linux/brcm63xx/patches-3.8/019-bcm63xx_enet-use-managed-io-memory-allocations.patch
new file mode 100644
index 0000000..717bcab
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/019-bcm63xx_enet-use-managed-io-memory-allocations.patch
@@ -0,0 +1,118 @@
+From 80b0356aea30e9fc9e075d31c2bf37e7cbfea8c9 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 10 Mar 2013 13:59:55 +0100
+Subject: [PATCH 1/3] bcm63xx_enet: use managed io memory allocations
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/net/ethernet/broadcom/bcm63xx_enet.c | 43 +++++---------------------
+ 1 file changed, 7 insertions(+), 36 deletions(-)
+
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -1620,7 +1620,6 @@ static int bcm_enet_probe(struct platfor
+ struct resource *res_mem, *res_irq, *res_irq_rx, *res_irq_tx;
+ struct mii_bus *bus;
+ const char *clk_name;
+- unsigned int iomem_size;
+ int i, ret;
+
+ /* stop if shared driver failed, assume driver->probe will be
+@@ -1645,17 +1644,12 @@ static int bcm_enet_probe(struct platfor
+ if (ret)
+ goto out;
+
+- iomem_size = resource_size(res_mem);
+- if (!request_mem_region(res_mem->start, iomem_size, "bcm63xx_enet")) {
+- ret = -EBUSY;
+- goto out;
+- }
+-
+- priv->base = ioremap(res_mem->start, iomem_size);
++ priv->base = devm_request_and_ioremap(&pdev->dev, res_mem);
+ if (priv->base == NULL) {
+ ret = -ENOMEM;
+- goto out_release_mem;
++ goto out;
+ }
++
+ dev->irq = priv->irq = res_irq->start;
+ priv->irq_rx = res_irq_rx->start;
+ priv->irq_tx = res_irq_tx->start;
+@@ -1675,7 +1669,7 @@ static int bcm_enet_probe(struct platfor
+ priv->mac_clk = clk_get(&pdev->dev, clk_name);
+ if (IS_ERR(priv->mac_clk)) {
+ ret = PTR_ERR(priv->mac_clk);
+- goto out_unmap;
++ goto out;
+ }
+ clk_enable(priv->mac_clk);
+
+@@ -1815,12 +1809,6 @@ out_uninit_hw:
+ out_put_clk_mac:
+ clk_disable(priv->mac_clk);
+ clk_put(priv->mac_clk);
+-
+-out_unmap:
+- iounmap(priv->base);
+-
+-out_release_mem:
+- release_mem_region(res_mem->start, iomem_size);
+ out:
+ free_netdev(dev);
+ return ret;
+@@ -1834,7 +1822,6 @@ static int bcm_enet_remove(struct platfo
+ {
+ struct bcm_enet_priv *priv;
+ struct net_device *dev;
+- struct resource *res;
+
+ /* stop netdevice */
+ dev = platform_get_drvdata(pdev);
+@@ -1857,11 +1844,6 @@ static int bcm_enet_remove(struct platfo
+ bcm_enet_mdio_write_mii);
+ }
+
+- /* release device resources */
+- iounmap(priv->base);
+- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+- release_mem_region(res->start, resource_size(res));
+-
+ /* disable hw block clocks */
+ if (priv->phy_clk) {
+ clk_disable(priv->phy_clk);
+@@ -1890,31 +1872,20 @@ struct platform_driver bcm63xx_enet_driv
+ static int bcm_enet_shared_probe(struct platform_device *pdev)
+ {
+ struct resource *res;
+- unsigned int iomem_size;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+- iomem_size = resource_size(res);
+- if (!request_mem_region(res->start, iomem_size, "bcm63xx_enet_dma"))
+- return -EBUSY;
+-
+- bcm_enet_shared_base = ioremap(res->start, iomem_size);
+- if (!bcm_enet_shared_base) {
+- release_mem_region(res->start, iomem_size);
++ bcm_enet_shared_base = devm_request_and_ioremap(&pdev->dev, res);
++ if (!bcm_enet_shared_base)
+ return -ENOMEM;
+- }
++
+ return 0;
+ }
+
+ static int bcm_enet_shared_remove(struct platform_device *pdev)
+ {
+- struct resource *res;
+-
+- iounmap(bcm_enet_shared_base);
+- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+- release_mem_region(res->start, resource_size(res));
+ return 0;
+ }
+
diff --git a/target/linux/brcm63xx/patches-3.8/020-bcm63xx_enet-use-managed-memory-allocations.patch b/target/linux/brcm63xx/patches-3.8/020-bcm63xx_enet-use-managed-memory-allocations.patch
new file mode 100644
index 0000000..7c356d5
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/020-bcm63xx_enet-use-managed-memory-allocations.patch
@@ -0,0 +1,42 @@
+From 451a609ca472f80838df056689359c5486d832c1 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 10 Mar 2013 14:05:01 +0100
+Subject: [PATCH 2/3] bcm63xx_enet: use managed memory allocations
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/net/ethernet/broadcom/bcm63xx_enet.c | 8 +++-----
+ 1 file changed, 3 insertions(+), 5 deletions(-)
+
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -1728,7 +1728,8 @@ static int bcm_enet_probe(struct platfor
+ * if a slave is not present on hw */
+ bus->phy_mask = ~(1 << priv->phy_id);
+
+- bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
++ bus->irq = devm_kzalloc(&pdev->dev, sizeof(int) * PHY_MAX_ADDR,
++ GFP_KERNEL);
+ if (!bus->irq) {
+ ret = -ENOMEM;
+ goto out_free_mdio;
+@@ -1789,10 +1790,8 @@ static int bcm_enet_probe(struct platfor
+ return 0;
+
+ out_unregister_mdio:
+- if (priv->mii_bus) {
++ if (priv->mii_bus)
+ mdiobus_unregister(priv->mii_bus);
+- kfree(priv->mii_bus->irq);
+- }
+
+ out_free_mdio:
+ if (priv->mii_bus)
+@@ -1833,7 +1832,6 @@ static int bcm_enet_remove(struct platfo
+
+ if (priv->has_phy) {
+ mdiobus_unregister(priv->mii_bus);
+- kfree(priv->mii_bus->irq);
+ mdiobus_free(priv->mii_bus);
+ } else {
+ struct bcm63xx_enet_platform_data *pd;
diff --git a/target/linux/brcm63xx/patches-3.8/021-bcm63xx_enet-properly-prepare-unprepare-clocks-befor.patch b/target/linux/brcm63xx/patches-3.8/021-bcm63xx_enet-properly-prepare-unprepare-clocks-befor.patch
new file mode 100644
index 0000000..aac70f9
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/021-bcm63xx_enet-properly-prepare-unprepare-clocks-befor.patch
@@ -0,0 +1,62 @@
+From 8d6b746129f11efe4ba69aeb2c982359d33c6ec3 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 10 Sep 2012 01:28:47 +0200
+Subject: [PATCH 3/3] bcm63xx_enet: properly prepare/unprepare clocks
+ before/after usage
+
+Use clk_prepare_enable/disable_unprepare calls in preparation for
+switching to the generic clock framework.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/net/ethernet/broadcom/bcm63xx_enet.c | 12 ++++++------
+ 1 file changed, 6 insertions(+), 6 deletions(-)
+
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -1671,7 +1671,7 @@ static int bcm_enet_probe(struct platfor
+ ret = PTR_ERR(priv->mac_clk);
+ goto out;
+ }
+- clk_enable(priv->mac_clk);
++ clk_prepare_enable(priv->mac_clk);
+
+ /* initialize default and fetch platform data */
+ priv->rx_ring_size = BCMENET_DEF_RX_DESC;
+@@ -1700,7 +1700,7 @@ static int bcm_enet_probe(struct platfor
+ priv->phy_clk = NULL;
+ goto out_put_clk_mac;
+ }
+- clk_enable(priv->phy_clk);
++ clk_prepare_enable(priv->phy_clk);
+ }
+
+ /* do minimal hardware init to be able to probe mii bus */
+@@ -1801,12 +1801,12 @@ out_uninit_hw:
+ /* turn off mdc clock */
+ enet_writel(priv, 0, ENET_MIISC_REG);
+ if (priv->phy_clk) {
+- clk_disable(priv->phy_clk);
++ clk_disable_unprepare(priv->phy_clk);
+ clk_put(priv->phy_clk);
+ }
+
+ out_put_clk_mac:
+- clk_disable(priv->mac_clk);
++ clk_disable_unprepare(priv->mac_clk);
+ clk_put(priv->mac_clk);
+ out:
+ free_netdev(dev);
+@@ -1844,10 +1844,10 @@ static int bcm_enet_remove(struct platfo
+
+ /* disable hw block clocks */
+ if (priv->phy_clk) {
+- clk_disable(priv->phy_clk);
++ clk_disable_unprepare(priv->phy_clk);
+ clk_put(priv->phy_clk);
+ }
+- clk_disable(priv->mac_clk);
++ clk_disable_unprepare(priv->mac_clk);
+ clk_put(priv->mac_clk);
+
+ platform_set_drvdata(pdev, NULL);
diff --git a/target/linux/brcm63xx/patches-3.8/022-MIPS-BCM63XX-remove-duplicate-spi-register-definitio.patch b/target/linux/brcm63xx/patches-3.8/022-MIPS-BCM63XX-remove-duplicate-spi-register-definitio.patch
new file mode 100644
index 0000000..50bbb93
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/022-MIPS-BCM63XX-remove-duplicate-spi-register-definitio.patch
@@ -0,0 +1,166 @@
+From e1a3ace7260fad338a76595b116a6bf5b5627aa2 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Thu, 7 Mar 2013 12:20:10 +0100
+Subject: [PATCH 1/7] MIPS: BCM63XX: remove duplicate spi register definitions
+
+BCM6338 and BCM6348, and BCM6358 and everything after that share the
+same register layout. To not have to redefine them for each new chip
+and keep the code size small, only use the definitions for the first
+chip with the certain layout.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-spi.c | 24 +++---------
+ .../include/asm/mach-bcm63xx/bcm63xx_dev_spi.h | 10 +----
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 40 +-------------------
+ 3 files changed, 10 insertions(+), 64 deletions(-)
+
+--- a/arch/mips/bcm63xx/dev-spi.c
++++ b/arch/mips/bcm63xx/dev-spi.c
+@@ -22,10 +22,6 @@
+ /*
+ * register offsets
+ */
+-static const unsigned long bcm6338_regs_spi[] = {
+- __GEN_SPI_REGS_TABLE(6338)
+-};
+-
+ static const unsigned long bcm6348_regs_spi[] = {
+ __GEN_SPI_REGS_TABLE(6348)
+ };
+@@ -34,23 +30,15 @@ static const unsigned long bcm6358_regs_
+ __GEN_SPI_REGS_TABLE(6358)
+ };
+
+-static const unsigned long bcm6368_regs_spi[] = {
+- __GEN_SPI_REGS_TABLE(6368)
+-};
+-
+ const unsigned long *bcm63xx_regs_spi;
+ EXPORT_SYMBOL(bcm63xx_regs_spi);
+
+ static __init void bcm63xx_spi_regs_init(void)
+ {
+- if (BCMCPU_IS_6338())
+- bcm63xx_regs_spi = bcm6338_regs_spi;
+- if (BCMCPU_IS_6348())
++ if (BCMCPU_IS_6338() || BCMCPU_IS_6348())
+ bcm63xx_regs_spi = bcm6348_regs_spi;
+- if (BCMCPU_IS_6358())
++ if (BCMCPU_IS_6358() || BCMCPU_IS_6368())
+ bcm63xx_regs_spi = bcm6358_regs_spi;
+- if (BCMCPU_IS_6368())
+- bcm63xx_regs_spi = bcm6368_regs_spi;
+ }
+ #else
+ static __init void bcm63xx_spi_regs_init(void) { }
+@@ -93,10 +81,10 @@ int __init bcm63xx_spi_register(void)
+ spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI);
+
+ if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
+- spi_resources[0].end += BCM_6338_RSET_SPI_SIZE - 1;
+- spi_pdata.fifo_size = SPI_6338_MSG_DATA_SIZE;
+- spi_pdata.msg_type_shift = SPI_6338_MSG_TYPE_SHIFT;
+- spi_pdata.msg_ctl_width = SPI_6338_MSG_CTL_WIDTH;
++ spi_resources[0].end += BCM_6348_RSET_SPI_SIZE - 1;
++ spi_pdata.fifo_size = SPI_6348_MSG_DATA_SIZE;
++ spi_pdata.msg_type_shift = SPI_6348_MSG_TYPE_SHIFT;
++ spi_pdata.msg_ctl_width = SPI_6348_MSG_CTL_WIDTH;
+ }
+
+ if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) {
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
+@@ -71,18 +71,12 @@ static inline unsigned long bcm63xx_spir
+
+ return bcm63xx_regs_spi[reg];
+ #else
+-#ifdef CONFIG_BCM63XX_CPU_6338
+- __GEN_SPI_RSET(6338)
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6348
++#if defined(CONFIG_BCM63XX_CPU_6338) || defined(CONFIG_BCM63XX_CPU_6348)
+ __GEN_SPI_RSET(6348)
+ #endif
+-#ifdef CONFIG_BCM63XX_CPU_6358
++#if defined(CONFIG_BCM63XX_CPU_6358) || defined(CONFIG_BCM63XX_CPU_6368)
+ __GEN_SPI_RSET(6358)
+ #endif
+-#ifdef CONFIG_BCM63XX_CPU_6368
+- __GEN_SPI_RSET(6368)
+-#endif
+ #endif
+ return 0;
+ }
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -1223,24 +1223,7 @@
+ * _REG relative to RSET_SPI
+ *************************************************************************/
+
+-/* BCM 6338 SPI core */
+-#define SPI_6338_CMD 0x00 /* 16-bits register */
+-#define SPI_6338_INT_STATUS 0x02
+-#define SPI_6338_INT_MASK_ST 0x03
+-#define SPI_6338_INT_MASK 0x04
+-#define SPI_6338_ST 0x05
+-#define SPI_6338_CLK_CFG 0x06
+-#define SPI_6338_FILL_BYTE 0x07
+-#define SPI_6338_MSG_TAIL 0x09
+-#define SPI_6338_RX_TAIL 0x0b
+-#define SPI_6338_MSG_CTL 0x40 /* 8-bits register */
+-#define SPI_6338_MSG_CTL_WIDTH 8
+-#define SPI_6338_MSG_DATA 0x41
+-#define SPI_6338_MSG_DATA_SIZE 0x3f
+-#define SPI_6338_RX_DATA 0x80
+-#define SPI_6338_RX_DATA_SIZE 0x3f
+-
+-/* BCM 6348 SPI core */
++/* BCM 6338/6348 SPI core */
+ #define SPI_6348_CMD 0x00 /* 16-bits register */
+ #define SPI_6348_INT_STATUS 0x02
+ #define SPI_6348_INT_MASK_ST 0x03
+@@ -1257,7 +1240,7 @@
+ #define SPI_6348_RX_DATA 0x80
+ #define SPI_6348_RX_DATA_SIZE 0x3f
+
+-/* BCM 6358 SPI core */
++/* BCM 6358/6368 SPI core */
+ #define SPI_6358_MSG_CTL 0x00 /* 16-bits register */
+ #define SPI_6358_MSG_CTL_WIDTH 16
+ #define SPI_6358_MSG_DATA 0x02
+@@ -1274,23 +1257,6 @@
+ #define SPI_6358_MSG_TAIL 0x709
+ #define SPI_6358_RX_TAIL 0x70B
+
+-/* BCM 6358 SPI core */
+-#define SPI_6368_MSG_CTL 0x00 /* 16-bits register */
+-#define SPI_6368_MSG_CTL_WIDTH 16
+-#define SPI_6368_MSG_DATA 0x02
+-#define SPI_6368_MSG_DATA_SIZE 0x21e
+-#define SPI_6368_RX_DATA 0x400
+-#define SPI_6368_RX_DATA_SIZE 0x220
+-#define SPI_6368_CMD 0x700 /* 16-bits register */
+-#define SPI_6368_INT_STATUS 0x702
+-#define SPI_6368_INT_MASK_ST 0x703
+-#define SPI_6368_INT_MASK 0x704
+-#define SPI_6368_ST 0x705
+-#define SPI_6368_CLK_CFG 0x706
+-#define SPI_6368_FILL_BYTE 0x707
+-#define SPI_6368_MSG_TAIL 0x709
+-#define SPI_6368_RX_TAIL 0x70B
+-
+ /* Shared SPI definitions */
+
+ /* Message configuration */
+@@ -1298,10 +1264,8 @@
+ #define SPI_HD_W 0x01
+ #define SPI_HD_R 0x02
+ #define SPI_BYTE_CNT_SHIFT 0
+-#define SPI_6338_MSG_TYPE_SHIFT 6
+ #define SPI_6348_MSG_TYPE_SHIFT 6
+ #define SPI_6358_MSG_TYPE_SHIFT 14
+-#define SPI_6368_MSG_TYPE_SHIFT 14
+
+ /* Command */
+ #define SPI_CMD_NOOP 0x00
diff --git a/target/linux/brcm63xx/patches-3.8/023-MIPS-BCM63XX-fix-revision-ID-width.patch b/target/linux/brcm63xx/patches-3.8/023-MIPS-BCM63XX-fix-revision-ID-width.patch
new file mode 100644
index 0000000..0ee88e1
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/023-MIPS-BCM63XX-fix-revision-ID-width.patch
@@ -0,0 +1,68 @@
+From 609c69339a24bd034f5359dad14087276ce5a83f Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 15 Jan 2012 14:41:22 +0100
+Subject: [PATCH 2/7] MIPS: BCM63XX: fix revision ID width
+
+The REVID is only 8 bit wide.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/cpu.c | 4 ++--
+ arch/mips/bcm63xx/setup.c | 2 +-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 2 +-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 2 +-
+ 4 files changed, 5 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -25,7 +25,7 @@ const int *bcm63xx_irqs;
+ EXPORT_SYMBOL(bcm63xx_irqs);
+
+ static u16 bcm63xx_cpu_id;
+-static u16 bcm63xx_cpu_rev;
++static u8 bcm63xx_cpu_rev;
+ static unsigned int bcm63xx_cpu_freq;
+ static unsigned int bcm63xx_memory_size;
+
+@@ -87,7 +87,7 @@ u16 __bcm63xx_get_cpu_id(void)
+
+ EXPORT_SYMBOL(__bcm63xx_get_cpu_id);
+
+-u16 bcm63xx_get_cpu_rev(void)
++u8 bcm63xx_get_cpu_rev(void)
+ {
+ return bcm63xx_cpu_rev;
+ }
+--- a/arch/mips/bcm63xx/setup.c
++++ b/arch/mips/bcm63xx/setup.c
+@@ -126,7 +126,7 @@ static void __bcm63xx_machine_reboot(cha
+ const char *get_system_type(void)
+ {
+ static char buf[128];
+- snprintf(buf, sizeof(buf), "bcm63xx/%s (0x%04x/0x%04X)",
++ snprintf(buf, sizeof(buf), "bcm63xx/%s (0x%04x/0x%02X)",
+ board_get_name(),
+ bcm63xx_get_cpu_id(), bcm63xx_get_cpu_rev());
+ return buf;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -18,7 +18,7 @@
+
+ void __init bcm63xx_cpu_init(void);
+ u16 __bcm63xx_get_cpu_id(void);
+-u16 bcm63xx_get_cpu_rev(void);
++u8 bcm63xx_get_cpu_rev(void);
+ unsigned int bcm63xx_get_cpu_freq(void);
+
+ #ifdef CONFIG_BCM63XX_CPU_6328
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -10,7 +10,7 @@
+ #define REV_CHIPID_SHIFT 16
+ #define REV_CHIPID_MASK (0xffff << REV_CHIPID_SHIFT)
+ #define REV_REVID_SHIFT 0
+-#define REV_REVID_MASK (0xffff << REV_REVID_SHIFT)
++#define REV_REVID_MASK (0xff << REV_REVID_SHIFT)
+
+ /* Clock Control register */
+ #define PERF_CKCTL_REG 0x4
diff --git a/target/linux/brcm63xx/patches-3.8/024-MIPS-BCM63XX-rework-chip-detection.patch b/target/linux/brcm63xx/patches-3.8/024-MIPS-BCM63XX-rework-chip-detection.patch
new file mode 100644
index 0000000..0ff9edf
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/024-MIPS-BCM63XX-rework-chip-detection.patch
@@ -0,0 +1,133 @@
+From 3f4570c9794fcae1cf62fbf3266a2e23edac67a5 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Wed, 27 Jun 2012 15:01:09 +0200
+Subject: [PATCH 3/7] MIPS: BCM63XX: rework chip detection
+
+Instead of trying to use a correlation of cpu prid and chip id and
+hoping they will always be unique, use the cpu prid to determine the
+chip id register location and just read out the chip id.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/cpu.c | 87 +++++++++++++++++++++++------------------------
+ 1 file changed, 42 insertions(+), 45 deletions(-)
+
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -240,53 +240,27 @@ static unsigned int detect_memory_size(v
+
+ void __init bcm63xx_cpu_init(void)
+ {
+- unsigned int tmp, expected_cpu_id;
++ unsigned int tmp;
+ struct cpuinfo_mips *c = &current_cpu_data;
+ unsigned int cpu = smp_processor_id();
++ u32 chipid_reg;
+
+ /* soc registers location depends on cpu type */
+- expected_cpu_id = 0;
++ chipid_reg = 0;
+
+ switch (c->cputype) {
+ case CPU_BMIPS3300:
+- if ((read_c0_prid() & 0xff00) == PRID_IMP_BMIPS3300_ALT) {
+- expected_cpu_id = BCM6348_CPU_ID;
+- bcm63xx_regs_base = bcm6348_regs_base;
+- bcm63xx_irqs = bcm6348_irqs;
+- } else {
++ if ((read_c0_prid() & 0xff00) != PRID_IMP_BMIPS3300_ALT)
+ __cpu_name[cpu] = "Broadcom BCM6338";
+- expected_cpu_id = BCM6338_CPU_ID;
+- bcm63xx_regs_base = bcm6338_regs_base;
+- bcm63xx_irqs = bcm6338_irqs;
+- }
+- break;
++ /* fall-through */
+ case CPU_BMIPS32:
+- expected_cpu_id = BCM6345_CPU_ID;
+- bcm63xx_regs_base = bcm6345_regs_base;
+- bcm63xx_irqs = bcm6345_irqs;
++ chipid_reg = BCM_6345_PERF_BASE;
+ break;
+ case CPU_BMIPS4350:
+- if ((read_c0_prid() & 0xf0) == 0x10) {
+- expected_cpu_id = BCM6358_CPU_ID;
+- bcm63xx_regs_base = bcm6358_regs_base;
+- bcm63xx_irqs = bcm6358_irqs;
+- } else {
+- /* all newer chips have the same chip id location */
+- u16 chip_id = bcm_readw(BCM_6368_PERF_BASE);
+-
+- switch (chip_id) {
+- case BCM6328_CPU_ID:
+- expected_cpu_id = BCM6328_CPU_ID;
+- bcm63xx_regs_base = bcm6328_regs_base;
+- bcm63xx_irqs = bcm6328_irqs;
+- break;
+- case BCM6368_CPU_ID:
+- expected_cpu_id = BCM6368_CPU_ID;
+- bcm63xx_regs_base = bcm6368_regs_base;
+- bcm63xx_irqs = bcm6368_irqs;
+- break;
+- }
+- }
++ if ((read_c0_prid() & 0xf0) == 0x10)
++ chipid_reg = BCM_6345_PERF_BASE;
++ else
++ chipid_reg = BCM_6368_PERF_BASE;
+ break;
+ }
+
+@@ -294,20 +268,43 @@ void __init bcm63xx_cpu_init(void)
+ * really early to panic, but delaying panic would not help since we
+ * will never get any working console
+ */
+- if (!expected_cpu_id)
++ if (!chipid_reg)
+ panic("unsupported Broadcom CPU");
+
+- /*
+- * bcm63xx_regs_base is set, we can access soc registers
+- */
+-
+- /* double check CPU type */
+- tmp = bcm_perf_readl(PERF_REV_REG);
++ /* read out CPU type */
++ tmp = bcm_readl(chipid_reg);
+ bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
+ bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
+
+- if (bcm63xx_cpu_id != expected_cpu_id)
+- panic("bcm63xx CPU id mismatch");
++ switch (bcm63xx_cpu_id) {
++ case BCM6328_CPU_ID:
++ bcm63xx_regs_base = bcm6328_regs_base;
++ bcm63xx_irqs = bcm6328_irqs;
++ break;
++ case BCM6338_CPU_ID:
++ bcm63xx_regs_base = bcm6338_regs_base;
++ bcm63xx_irqs = bcm6338_irqs;
++ break;
++ case BCM6345_CPU_ID:
++ bcm63xx_regs_base = bcm6345_regs_base;
++ bcm63xx_irqs = bcm6345_irqs;
++ break;
++ case BCM6348_CPU_ID:
++ bcm63xx_regs_base = bcm6348_regs_base;
++ bcm63xx_irqs = bcm6348_irqs;
++ break;
++ case BCM6358_CPU_ID:
++ bcm63xx_regs_base = bcm6358_regs_base;
++ bcm63xx_irqs = bcm6358_irqs;
++ break;
++ case BCM6368_CPU_ID:
++ bcm63xx_regs_base = bcm6368_regs_base;
++ bcm63xx_irqs = bcm6368_irqs;
++ break;
++ default:
++ panic("unsupported broadcom CPU %x", bcm63xx_cpu_id);
++ break;
++ }
+
+ bcm63xx_cpu_freq = detect_cpu_clock();
+ bcm63xx_memory_size = detect_memory_size();
diff --git a/target/linux/brcm63xx/patches-3.8/312-MIPS-BCM63XX-add-basic-BCM6362-support.patch b/target/linux/brcm63xx/patches-3.8/025-MIPS-BCM63XX-add-basic-BCM6362-support.patch
index 9068590..53a6497 100644
--- a/target/linux/brcm63xx/patches-3.8/312-MIPS-BCM63XX-add-basic-BCM6362-support.patch
+++ b/target/linux/brcm63xx/patches-3.8/025-MIPS-BCM63XX-add-basic-BCM6362-support.patch
@@ -1,28 +1,30 @@
-From 2665f554de21676a4cf609b1e1bb39d0597a1985 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
+From 1071a9c9527d68eca4605e2eb1686609bfecf287 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
Date: Mon, 21 Nov 2011 00:48:52 +0100
-Subject: [PATCH 28/72] MIPS: BCM63XX: add basic BCM6362 support
+Subject: [PATCH 4/7] MIPS: BCM63XX: add basic BCM6362 support
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+Add basic support for detecting and booting the BCM6362.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
arch/mips/bcm63xx/Kconfig | 4 +
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 2 +-
- arch/mips/bcm63xx/cpu.c | 52 +++++++-
- arch/mips/bcm63xx/irq.c | 19 +++
+ arch/mips/bcm63xx/boards/board_bcm963xx.c | 6 +-
+ arch/mips/bcm63xx/cpu.c | 51 +++++++-
+ arch/mips/bcm63xx/irq.c | 22 ++++
arch/mips/bcm63xx/prom.c | 2 +
arch/mips/bcm63xx/reset.c | 28 +++++
arch/mips/bcm63xx/setup.c | 3 +
arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 139 +++++++++++++++++++++
arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h | 2 +
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 59 +++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 61 ++++++++-
arch/mips/include/asm/mach-bcm63xx/ioremap.h | 1 +
- 11 files changed, 309 insertions(+), 2 deletions(-)
+ 11 files changed, 314 insertions(+), 5 deletions(-)
--- a/arch/mips/bcm63xx/Kconfig
+++ b/arch/mips/bcm63xx/Kconfig
-@@ -37,6 +37,10 @@ config BCM63XX_CPU_6358
- select BCM63XX_OHCI
- select BCM63XX_EHCI
+@@ -25,6 +25,10 @@ config BCM63XX_CPU_6358
+ bool "support 6358 CPU"
+ select HW_HAS_PCI
+config BCM63XX_CPU_6362
+ bool "support 6362 CPU"
@@ -33,15 +35,21 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
select HW_HAS_PCI
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -785,7 +785,7 @@ void __init board_prom_init(void)
+@@ -726,11 +726,11 @@ void __init board_prom_init(void)
+ u32 val;
+
/* read base address of boot chip select (0)
- * 6328 does not have MPI but boots from a fixed address
+- * 6328 does not have MPI but boots from a fixed address
++ * 6328/6362 do not have MPI but boot from a fixed address
*/
- if (BCMCPU_IS_6328())
-+ if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
++ if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
val = 0x18000000;
- else {
+- else {
++ } else {
val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+ val &= MPI_CSBASE_BASE_MASK;
+ }
--- a/arch/mips/bcm63xx/cpu.c
+++ b/arch/mips/bcm63xx/cpu.c
@@ -71,6 +71,15 @@ static const int bcm6358_irqs[] = {
@@ -112,21 +120,20 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
return bcm_ddr_readl(DDR_CSEND_REG) << 24;
if (BCMCPU_IS_6345()) {
-@@ -280,6 +325,11 @@ void __init bcm63xx_cpu_init(void)
- bcm63xx_regs_base = bcm6328_regs_base;
- bcm63xx_irqs = bcm6328_irqs;
- break;
-+ case BCM6362_CPU_ID:
-+ expected_cpu_id = BCM6362_CPU_ID;
-+ bcm63xx_regs_base = bcm6362_regs_base;
-+ bcm63xx_irqs = bcm6362_irqs;
-+ break;
- case BCM6368_CPU_ID:
- expected_cpu_id = BCM6368_CPU_ID;
- bcm63xx_regs_base = bcm6368_regs_base;
+@@ -297,6 +342,10 @@ void __init bcm63xx_cpu_init(void)
+ bcm63xx_regs_base = bcm6358_regs_base;
+ bcm63xx_irqs = bcm6358_irqs;
+ break;
++ case BCM6362_CPU_ID:
++ bcm63xx_regs_base = bcm6362_regs_base;
++ bcm63xx_irqs = bcm6362_irqs;
++ break;
+ case BCM6368_CPU_ID:
+ bcm63xx_regs_base = bcm6368_regs_base;
+ bcm63xx_irqs = bcm6368_irqs;
--- a/arch/mips/bcm63xx/irq.c
+++ b/arch/mips/bcm63xx/irq.c
-@@ -82,6 +82,14 @@ static void __internal_irq_unmask_64(uns
+@@ -82,6 +82,17 @@ static void __internal_irq_unmask_64(uns
#define ext_irq_cfg_reg1 PERF_EXTIRQ_CFG_REG_6358
#define ext_irq_cfg_reg2 0
#endif
@@ -137,11 +144,14 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+#define is_ext_irq_cascaded 1
+#define ext_irq_start (BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE)
+#define ext_irq_end (BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE)
++#define ext_irq_count 4
++#define ext_irq_cfg_reg1 PERF_EXTIRQ_CFG_REG_6362
++#define ext_irq_cfg_reg2 0
+#endif
#ifdef CONFIG_BCM63XX_CPU_6368
#define irq_stat_reg PERF_IRQSTAT_6368_REG
#define irq_mask_reg PERF_IRQMASK_6368_REG
-@@ -170,6 +178,16 @@ static void bcm63xx_init_irq(void)
+@@ -170,6 +181,16 @@ static void bcm63xx_init_irq(void)
ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE;
ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
break;
@@ -158,7 +168,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
case BCM6368_CPU_ID:
irq_stat_addr += PERF_IRQSTAT_6368_REG;
irq_mask_addr += PERF_IRQMASK_6368_REG;
-@@ -458,6 +476,7 @@ static int bcm63xx_external_irq_set_type
+@@ -458,6 +479,7 @@ static int bcm63xx_external_irq_set_type
case BCM6338_CPU_ID:
case BCM6345_CPU_ID:
case BCM6358_CPU_ID:
@@ -278,7 +288,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
#ifdef CONFIG_BCM63XX_CPU_6368
# ifdef bcm63xx_get_cpu_id
# undef bcm63xx_get_cpu_id
-@@ -413,6 +428,62 @@ enum bcm63xx_regs_set {
+@@ -406,6 +421,62 @@ enum bcm63xx_regs_set {
/*
@@ -341,7 +351,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* 6368 register sets base address
*/
#define BCM_6368_DSL_LMEM_BASE (0xdeadbeef)
-@@ -574,6 +645,9 @@ static inline unsigned long bcm63xx_regs
+@@ -564,6 +635,9 @@ static inline unsigned long bcm63xx_regs
#ifdef CONFIG_BCM63XX_CPU_6358
__GEN_RSET(6358)
#endif
@@ -351,7 +361,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
#ifdef CONFIG_BCM63XX_CPU_6368
__GEN_RSET(6368)
#endif
-@@ -836,6 +910,71 @@ enum bcm63xx_irq {
+@@ -820,6 +894,71 @@ enum bcm63xx_irq {
#define BCM_6358_EXT_IRQ3 (IRQ_INTERNAL_BASE + 28)
/*
@@ -531,7 +541,16 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
#define SOFTRESET_6368_SPI_MASK (1 << 0)
#define SOFTRESET_6368_MPI_MASK (1 << 3)
#define SOFTRESET_6368_EPHY_MASK (1 << 6)
-@@ -1352,6 +1405,12 @@
+@@ -1240,7 +1293,7 @@
+ #define SPI_6348_RX_DATA 0x80
+ #define SPI_6348_RX_DATA_SIZE 0x3f
+
+-/* BCM 6358/6368 SPI core */
++/* BCM 6358/6262/6368 SPI core */
+ #define SPI_6358_MSG_CTL 0x00 /* 16-bits register */
+ #define SPI_6358_MSG_CTL_WIDTH 16
+ #define SPI_6358_MSG_DATA 0x02
+@@ -1316,6 +1369,12 @@
#define SERDES_PCIE_EN (1 << 0)
#define SERDES_PCIE_EXD_EN (1 << 15)
diff --git a/target/linux/brcm63xx/patches-3.8/026-MIPS-BCM63XX-enable-SPI-controller-for-BCM6362.patch b/target/linux/brcm63xx/patches-3.8/026-MIPS-BCM63XX-enable-SPI-controller-for-BCM6362.patch
new file mode 100644
index 0000000..27a411d
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/026-MIPS-BCM63XX-enable-SPI-controller-for-BCM6362.patch
@@ -0,0 +1,57 @@
+From 5da349ee614f61a2e6edb403098f40c6d40f2553 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Thu, 5 Jul 2012 21:19:20 +0200
+Subject: [PATCH 5/7] MIPS: BCM63XX: enable SPI controller for BCM6362
+
+The SPI controller shares the same register layout as the 6358 one.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/clk.c | 2 ++
+ arch/mips/bcm63xx/dev-spi.c | 4 ++--
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h | 3 ++-
+ 3 files changed, 6 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -202,6 +202,8 @@ static void spi_set(struct clk *clk, int
+ mask = CKCTL_6348_SPI_EN;
+ else if (BCMCPU_IS_6358())
+ mask = CKCTL_6358_SPI_EN;
++ else if (BCMCPU_IS_6362())
++ mask = CKCTL_6362_SPI_EN;
+ else
+ /* BCMCPU_IS_6368 */
+ mask = CKCTL_6368_SPI_EN;
+--- a/arch/mips/bcm63xx/dev-spi.c
++++ b/arch/mips/bcm63xx/dev-spi.c
+@@ -37,7 +37,7 @@ static __init void bcm63xx_spi_regs_init
+ {
+ if (BCMCPU_IS_6338() || BCMCPU_IS_6348())
+ bcm63xx_regs_spi = bcm6348_regs_spi;
+- if (BCMCPU_IS_6358() || BCMCPU_IS_6368())
++ if (BCMCPU_IS_6358() || BCMCPU_IS_6362() || BCMCPU_IS_6368())
+ bcm63xx_regs_spi = bcm6358_regs_spi;
+ }
+ #else
+@@ -87,7 +87,7 @@ int __init bcm63xx_spi_register(void)
+ spi_pdata.msg_ctl_width = SPI_6348_MSG_CTL_WIDTH;
+ }
+
+- if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) {
++ if (BCMCPU_IS_6358() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
+ spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
+ spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE;
+ spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
+@@ -74,7 +74,8 @@ static inline unsigned long bcm63xx_spir
+ #if defined(CONFIG_BCM63XX_CPU_6338) || defined(CONFIG_BCM63XX_CPU_6348)
+ __GEN_SPI_RSET(6348)
+ #endif
+-#if defined(CONFIG_BCM63XX_CPU_6358) || defined(CONFIG_BCM63XX_CPU_6368)
++#if defined(CONFIG_BCM63XX_CPU_6358) || defined(CONFIG_BCM63XX_CPU_6362) || \
++ defined(CONFIG_BCM63XX_CPU_6368)
+ __GEN_SPI_RSET(6358)
+ #endif
+ #endif
diff --git a/target/linux/brcm63xx/patches-3.8/313-MIPS-BCM63XX-enable-pcie-for-BCM6362.patch b/target/linux/brcm63xx/patches-3.8/027-MIPS-BCM63XX-enable-pcie-for-BCM6362.patch
index 467b5fe..3c5b119 100644
--- a/target/linux/brcm63xx/patches-3.8/313-MIPS-BCM63XX-enable-pcie-for-BCM6362.patch
+++ b/target/linux/brcm63xx/patches-3.8/027-MIPS-BCM63XX-enable-pcie-for-BCM6362.patch
@@ -1,16 +1,20 @@
-From 2f94c414e554531e2a65a7c4a7fa2d1ba0380c0a Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
+From ec6f1e53b22d01e628b79b99f7a33960034e97e7 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
Date: Mon, 21 Nov 2011 00:53:26 +0100
-Subject: [PATCH 29/72] MIPS: BCM63XX: enable pcie for BCM6362
+Subject: [PATCH 6/7] MIPS: BCM63XX: enable pcie for BCM6362
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+The PCIe controller is almost the same as the BCM6328 one, with only
+the SERDES register being at a different location.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
- arch/mips/pci/pci-bcm63xx.c | 19 ++++++++++++++++---
- 1 file changed, 16 insertions(+), 3 deletions(-)
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 3 ++-
+ arch/mips/pci/pci-bcm63xx.c | 11 +++++++++--
+ 2 files changed, 11 insertions(+), 3 deletions(-)
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1401,7 +1401,8 @@
+@@ -1365,7 +1365,8 @@
/*************************************************************************
* _REG relative to RSET_MISC
*************************************************************************/
diff --git a/target/linux/brcm63xx/patches-3.8/028-MIPS-BCM63XX-add-flash-detection-for-BCM6362.patch b/target/linux/brcm63xx/patches-3.8/028-MIPS-BCM63XX-add-flash-detection-for-BCM6362.patch
new file mode 100644
index 0000000..38125a5
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/028-MIPS-BCM63XX-add-flash-detection-for-BCM6362.patch
@@ -0,0 +1,38 @@
+From 01034e48e72783ced82a050e862f82ee3dfdb783 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 21 Nov 2011 00:48:52 +0100
+Subject: [PATCH 7/7] MIPS: BCM63XX: add flash detection for BCM6362
+
+BCM6362 support booting from SPI flash and NAND.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-flash.c | 6 ++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 1 +
+ 2 files changed, 7 insertions(+)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -77,6 +77,12 @@ static int __init bcm63xx_detect_flash_t
+ return BCM63XX_FLASH_TYPE_PARALLEL;
+ else
+ return BCM63XX_FLASH_TYPE_SERIAL;
++ case BCM6362_CPU_ID:
++ val = bcm_misc_readl(MISC_STRAPBUS_6362_REG);
++ if (val & STRAPBUS_6362_BOOT_SEL_SERIAL)
++ return BCM63XX_FLASH_TYPE_SERIAL;
++ else
++ return BCM63XX_FLASH_TYPE_NAND;
+ case BCM6368_CPU_ID:
+ val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
+ switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -1372,6 +1372,7 @@
+
+ #define MISC_STRAPBUS_6362_REG 0x14
+ #define STRAPBUS_6362_FCVO_SHIFT 1
++#define STRAPBUS_6362_HSSPI_CLK_FAST (1 << 13)
+ #define STRAPBUS_6362_FCVO_MASK (0x1f << STRAPBUS_6362_FCVO_SHIFT)
+ #define STRAPBUS_6362_BOOT_SEL_SERIAL (1 << 15)
+ #define STRAPBUS_6362_BOOT_SEL_NAND (0 << 15)
diff --git a/target/linux/brcm63xx/patches-3.8/029-MIPS-BCM63XX-add-missing-clocks-for-BCM6328-and-BCM6.patch b/target/linux/brcm63xx/patches-3.8/029-MIPS-BCM63XX-add-missing-clocks-for-BCM6328-and-BCM6.patch
new file mode 100644
index 0000000..bc72a00
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/029-MIPS-BCM63XX-add-missing-clocks-for-BCM6328-and-BCM6.patch
@@ -0,0 +1,91 @@
+From d31454bc822e1957e758e75d4367bcd12af89743 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Thu, 18 Apr 2013 21:23:11 +0200
+Subject: [PATCH] MIPS: BCM63XX: add missing clocks for BCM6328 and BCM6362
+
+Add currently unused missing clocks for BCM6328 and BCM6362.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/clk.c | 33 +++++++++++++++++++++++++--------
+ 1 file changed, 25 insertions(+), 8 deletions(-)
+
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -125,11 +125,18 @@ static struct clk clk_ephy = {
+ */
+ static void enetsw_set(struct clk *clk, int enable)
+ {
+- if (!BCMCPU_IS_6368())
++ if (BCMCPU_IS_6328())
++ bcm_hwclock_set(CKCTL_6328_ROBOSW_EN, enable);
++ else if (BCMCPU_IS_6362())
++ bcm_hwclock_set(CKCTL_6362_ROBOSW_EN, enable);
++ else if (BCMCPU_IS_6368())
++ bcm_hwclock_set(CKCTL_6368_ROBOSW_EN |
++ CKCTL_6368_SWPKT_USB_EN |
++ CKCTL_6368_SWPKT_SAR_EN,
++ enable);
++ else
+ return;
+- bcm_hwclock_set(CKCTL_6368_ROBOSW_EN |
+- CKCTL_6368_SWPKT_USB_EN |
+- CKCTL_6368_SWPKT_SAR_EN, enable);
++
+ if (enable) {
+ /* reset switch core afer clock change */
+ bcm63xx_core_set_reset(BCM63XX_RESET_ENETSW, 1);
+@@ -166,6 +173,8 @@ static void usbh_set(struct clk *clk, in
+ bcm_hwclock_set(CKCTL_6328_USBH_EN, enable);
+ else if (BCMCPU_IS_6348())
+ bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
++ else if (BCMCPU_IS_6362())
++ bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
+ else if (BCMCPU_IS_6368())
+ bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
+ }
+@@ -181,6 +190,8 @@ static void usbd_set(struct clk *clk, in
+ {
+ if (BCMCPU_IS_6328())
+ bcm_hwclock_set(CKCTL_6328_USBD_EN, enable);
++ else if (BCMCPU_IS_6362())
++ bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
+ else if (BCMCPU_IS_6368())
+ bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
+ }
+@@ -244,7 +255,10 @@ static struct clk clk_xtm = {
+ */
+ static void ipsec_set(struct clk *clk, int enable)
+ {
+- bcm_hwclock_set(CKCTL_6368_IPSEC_EN, enable);
++ if (BCMCPU_IS_6362())
++ bcm_hwclock_set(CKCTL_6362_IPSEC_EN, enable);
++ else if (BCMCPU_IS_6368())
++ bcm_hwclock_set(CKCTL_6368_IPSEC_EN, enable);
+ }
+
+ static struct clk clk_ipsec = {
+@@ -257,7 +271,10 @@ static struct clk clk_ipsec = {
+
+ static void pcie_set(struct clk *clk, int enable)
+ {
+- bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
++ if (BCMCPU_IS_6328())
++ bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
++ else if (BCMCPU_IS_6362())
++ bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable);
+ }
+
+ static struct clk clk_pcie = {
+@@ -323,9 +340,9 @@ struct clk *clk_get(struct device *dev,
+ return &clk_periph;
+ if (BCMCPU_IS_6358() && !strcmp(id, "pcm"))
+ return &clk_pcm;
+- if (BCMCPU_IS_6368() && !strcmp(id, "ipsec"))
++ if ((BCMCPU_IS_6362() || BCMCPU_IS_6368()) && !strcmp(id, "ipsec"))
+ return &clk_ipsec;
+- if (BCMCPU_IS_6328() && !strcmp(id, "pcie"))
++ if ((BCMCPU_IS_6328() || BCMCPU_IS_6362()) && !strcmp(id, "pcie"))
+ return &clk_pcie;
+ return ERR_PTR(-ENOENT);
+ }
diff --git a/target/linux/brcm63xx/patches-3.8/030-MTD-bcm63xxpart-use-size-macro-for-CFE-block-size.patch b/target/linux/brcm63xx/patches-3.8/030-MTD-bcm63xxpart-use-size-macro-for-CFE-block-size.patch
new file mode 100644
index 0000000..a7f7822
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/030-MTD-bcm63xxpart-use-size-macro-for-CFE-block-size.patch
@@ -0,0 +1,29 @@
+From e2092cf1b164ede62b740c7c95905171fb6232ff Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 23 Mar 2013 12:32:56 +0100
+Subject: [PATCH v2 1/3] MTD: bcm63xxpart: use size macro for CFE block size
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/mtd/bcm63xxpart.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/mtd/bcm63xxpart.c
++++ b/drivers/mtd/bcm63xxpart.c
+@@ -27,6 +27,7 @@
+ #include <linux/crc32.h>
+ #include <linux/module.h>
+ #include <linux/kernel.h>
++#include <linux/sizes.h>
+ #include <linux/slab.h>
+ #include <linux/vmalloc.h>
+ #include <linux/mtd/mtd.h>
+@@ -37,7 +38,7 @@
+
+ #define BCM63XX_EXTENDED_SIZE 0xBFC00000 /* Extended flash address */
+
+-#define BCM63XX_CFE_BLOCK_SIZE 0x10000 /* always at least 64KiB */
++#define BCM63XX_CFE_BLOCK_SIZE SZ_64K /* always at least 64KiB */
+
+ #define BCM63XX_CFE_MAGIC_OFFSET 0x4e0
+
diff --git a/target/linux/brcm63xx/patches-3.8/031-MIPS-BCM63XX-export-PSI-size-from-nvram.patch b/target/linux/brcm63xx/patches-3.8/031-MIPS-BCM63XX-export-PSI-size-from-nvram.patch
new file mode 100644
index 0000000..8ff9659
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/031-MIPS-BCM63XX-export-PSI-size-from-nvram.patch
@@ -0,0 +1,58 @@
+From bda508f975d1372568a4fc9862be501a6176fd46 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 12 May 2012 23:04:17 +0200
+Subject: [PATCH v2 2/3] MIPS: BCM63XX: export PSI size from nvram
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/nvram.c | 13 +++++++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h | 7 +++++++
+ 2 files changed, 20 insertions(+)
+
+--- a/arch/mips/bcm63xx/nvram.c
++++ b/arch/mips/bcm63xx/nvram.c
+@@ -15,6 +15,7 @@
+ #include <linux/export.h>
+ #include <linux/kernel.h>
+ #include <linux/if_ether.h>
++#include <linux/sizes.h>
+
+ #include <bcm63xx_nvram.h>
+
+@@ -35,6 +36,8 @@ struct bcm963xx_nvram {
+ u32 checksum_high;
+ };
+
++#define BCM63XX_DEFAULT_PSI_SIZE SZ_64K
++
+ static struct bcm963xx_nvram nvram;
+ static int mac_addr_used;
+
+@@ -104,3 +107,13 @@ int bcm63xx_nvram_get_mac_address(u8 *ma
+ return 0;
+ }
+ EXPORT_SYMBOL(bcm63xx_nvram_get_mac_address);
++
++unsigned int bcm63xx_nvram_get_psi_size(void)
++{
++ /* max is 64k, but some vendors use higher values */
++ if (nvram.psi_size > 0 && nvram.psi_size <= 512)
++ return nvram.psi_size * SZ_1K;
++
++ return BCM63XX_DEFAULT_PSI_SIZE;
++}
++EXPORT_SYMBOL(bcm63xx_nvram_get_psi_size);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h
+@@ -30,4 +30,11 @@ u8 *bcm63xx_nvram_get_name(void);
+ */
+ int bcm63xx_nvram_get_mac_address(u8 *mac);
+
++/**
++ * bcm63xx_nvram_get_psi_size() - returns the size of the PSI area
++ *
++ * Returns the size of the Persitent Storage Information area in bytes.
++ */
++unsigned int bcm63xx_nvram_get_psi_size(void);
++
+ #endif /* BCM63XX_NVRAM_H */
diff --git a/target/linux/brcm63xx/patches-3.8/032-MTD-bcm63xxpart-use-nvram-for-PSI-size.patch b/target/linux/brcm63xx/patches-3.8/032-MTD-bcm63xxpart-use-nvram-for-PSI-size.patch
new file mode 100644
index 0000000..f1c1a0f
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/032-MTD-bcm63xxpart-use-nvram-for-PSI-size.patch
@@ -0,0 +1,42 @@
+From f6eefaa4a08ec27c69485c2fc4db23247b84f8c9 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 1 May 2012 14:10:39 +0200
+Subject: [PATCH v2 3/3] MTD: bcm63xxpart: use nvram for PSI size
+
+Read out the SPI size from nvram instead of defaulting to 64K - some
+vendors actually use values larger than the "max" value of 64.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/mtd/bcm63xxpart.c | 6 ++++--
+ 1 file changed, 4 insertions(+), 2 deletions(-)
+
+--- a/drivers/mtd/bcm63xxpart.c
++++ b/drivers/mtd/bcm63xxpart.c
+@@ -4,7 +4,7 @@
+ * Copyright © 2006-2008 Florian Fainelli <florian@openwrt.org>
+ * Mike Albon <malbon@openwrt.org>
+ * Copyright © 2009-2010 Daniel Dickinson <openwrt@cshore.neomailbox.net>
+- * Copyright © 2011-2012 Jonas Gorski <jonas.gorski@gmail.com>
++ * Copyright © 2011-2013 Jonas Gorski <jonas.gorski@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+@@ -34,6 +34,7 @@
+ #include <linux/mtd/partitions.h>
+
+ #include <linux/bcm963xx_tag.h>
++#include <asm/mach-bcm63xx/bcm63xx_nvram.h>
+ #include <asm/mach-bcm63xx/board_bcm963xx.h>
+
+ #define BCM63XX_EXTENDED_SIZE 0xBFC00000 /* Extended flash address */
+@@ -91,7 +92,8 @@ static int bcm63xx_parse_cfe_partitions(
+ BCM63XX_CFE_BLOCK_SIZE);
+
+ cfelen = cfe_erasesize;
+- nvramlen = cfe_erasesize;
++ nvramlen = bcm63xx_nvram_get_psi_size();
++ nvramlen = roundup(nvramlen, cfe_erasesize);
+
+ /* Allocate memory for buffer */
+ buf = vmalloc(sizeof(struct bcm_tag));
diff --git a/target/linux/brcm63xx/patches-3.8/108-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch b/target/linux/brcm63xx/patches-3.8/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch
index 26ded38..63d385b 100644
--- a/target/linux/brcm63xx/patches-3.8/108-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch
+++ b/target/linux/brcm63xx/patches-3.8/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch
@@ -14,8 +14,8 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
-@@ -162,6 +162,11 @@ static void usbh_set(struct clk *clk, in
- bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
+@@ -177,6 +177,11 @@ static void usbh_set(struct clk *clk, in
+ bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
else if (BCMCPU_IS_6368())
bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
+ else
diff --git a/target/linux/brcm63xx/patches-3.8/109-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch b/target/linux/brcm63xx/patches-3.8/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
index 8031448..eaf7503 100644
--- a/target/linux/brcm63xx/patches-3.8/109-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
+++ b/target/linux/brcm63xx/patches-3.8/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
@@ -17,8 +17,8 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
-@@ -182,6 +182,11 @@ static void usbd_set(struct clk *clk, in
- bcm_hwclock_set(CKCTL_6328_USBD_EN, enable);
+@@ -199,6 +199,11 @@ static void usbd_set(struct clk *clk, in
+ bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
else if (BCMCPU_IS_6368())
bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
+ else
diff --git a/target/linux/brcm63xx/patches-3.8/110-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch b/target/linux/brcm63xx/patches-3.8/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
index 4d00f0e..4d00f0e 100644
--- a/target/linux/brcm63xx/patches-3.8/110-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
+++ b/target/linux/brcm63xx/patches-3.8/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
diff --git a/target/linux/brcm63xx/patches-3.8/111-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch b/target/linux/brcm63xx/patches-3.8/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch
index 57e6c83..40bbe08 100644
--- a/target/linux/brcm63xx/patches-3.8/111-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch
+++ b/target/linux/brcm63xx/patches-3.8/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch
@@ -109,7 +109,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
+ bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
+ USBH_PRIV_TEST_6358_REG);
+
-+ } else if (BCMCPU_IS_6328() || BCMCPU_IS_6368()) {
++ } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
+ reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
+ reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
@@ -144,7 +144,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
+ bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
+ USBH_PRIV_TEST_6358_REG);
+
-+ } else if (BCMCPU_IS_6328() || BCMCPU_IS_6368()) {
++ } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
+ reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
+ reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
diff --git a/target/linux/brcm63xx/patches-3.8/112-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch b/target/linux/brcm63xx/patches-3.8/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch
index da5a310..f2134ba 100644
--- a/target/linux/brcm63xx/patches-3.8/112-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch
+++ b/target/linux/brcm63xx/patches-3.8/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch
@@ -16,7 +16,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
--- a/arch/mips/bcm63xx/Kconfig
+++ b/arch/mips/bcm63xx/Kconfig
-@@ -1,33 +1,38 @@
+@@ -1,37 +1,43 @@
menu "CPU support"
depends on BCM63XX
@@ -53,6 +53,11 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
select HW_HAS_PCI
+ select BCM63XX_OHCI
+ config BCM63XX_CPU_6362
+ bool "support 6362 CPU"
+ select HW_HAS_PCI
++ select BCM63XX_OHCI
+
config BCM63XX_CPU_6368
bool "support 6368 CPU"
select HW_HAS_PCI
diff --git a/target/linux/brcm63xx/patches-3.8/113-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch b/target/linux/brcm63xx/patches-3.8/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch
index 732fe94..732fe94 100644
--- a/target/linux/brcm63xx/patches-3.8/113-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch
+++ b/target/linux/brcm63xx/patches-3.8/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch
diff --git a/target/linux/brcm63xx/patches-3.8/114-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch b/target/linux/brcm63xx/patches-3.8/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch
index 04c2b8a..11dafd6 100644
--- a/target/linux/brcm63xx/patches-3.8/114-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch
+++ b/target/linux/brcm63xx/patches-3.8/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch
@@ -24,7 +24,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
#include <bcm63xx_dev_usb_usbd.h>
#include <board_bcm963xx.h>
-@@ -851,6 +852,9 @@ int __init board_register_devices(void)
+@@ -848,6 +849,9 @@ int __init board_register_devices(void)
if (board.has_usbd)
bcm63xx_usbd_register(&board.usbd);
diff --git a/target/linux/brcm63xx/patches-3.8/115-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch b/target/linux/brcm63xx/patches-3.8/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch
index dcf433a..104ff3c 100644
--- a/target/linux/brcm63xx/patches-3.8/115-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch
+++ b/target/linux/brcm63xx/patches-3.8/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch
@@ -37,12 +37,18 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
config BCM63XX_CPU_6338
bool "support 6338 CPU"
-@@ -28,11 +35,13 @@ config BCM63XX_CPU_6358
+@@ -28,16 +35,19 @@ config BCM63XX_CPU_6358
bool "support 6358 CPU"
select HW_HAS_PCI
select BCM63XX_OHCI
+ select BCM63XX_EHCI
+ config BCM63XX_CPU_6362
+ bool "support 6362 CPU"
+ select HW_HAS_PCI
+ select BCM63XX_OHCI
++ select BCM63XX_EHCI
+
config BCM63XX_CPU_6368
bool "support 6368 CPU"
select HW_HAS_PCI
diff --git a/target/linux/brcm63xx/patches-3.8/116-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch b/target/linux/brcm63xx/patches-3.8/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch
index 366e7ac..ef4ba17 100644
--- a/target/linux/brcm63xx/patches-3.8/116-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch
+++ b/target/linux/brcm63xx/patches-3.8/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch
@@ -115,7 +115,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
+
+int __init bcm63xx_ehci_register(void)
+{
-+ if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6368())
++ if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
+ return 0;
+
+ ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
diff --git a/target/linux/brcm63xx/patches-3.8/117-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch b/target/linux/brcm63xx/patches-3.8/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch
index 5005fe3..703f2a4 100644
--- a/target/linux/brcm63xx/patches-3.8/117-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch
+++ b/target/linux/brcm63xx/patches-3.8/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch
@@ -24,7 +24,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
#include <bcm63xx_dev_usb_ohci.h>
#include <bcm63xx_dev_usb_usbd.h>
#include <board_bcm963xx.h>
-@@ -852,6 +853,9 @@ int __init board_register_devices(void)
+@@ -849,6 +850,9 @@ int __init board_register_devices(void)
if (board.has_usbd)
bcm63xx_usbd_register(&board.usbd);
diff --git a/target/linux/brcm63xx/patches-3.8/118-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch b/target/linux/brcm63xx/patches-3.8/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch
index 6d91129..6d91129 100644
--- a/target/linux/brcm63xx/patches-3.8/118-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch
+++ b/target/linux/brcm63xx/patches-3.8/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch
diff --git a/target/linux/brcm63xx/patches-3.8/307-MIPS-BCM63XX-allow-second-UART-on-BCM6328.patch b/target/linux/brcm63xx/patches-3.8/305-MIPS-BCM63XX-allow-second-UART-on-BCM6328.patch
index 1418d65..1418d65 100644
--- a/target/linux/brcm63xx/patches-3.8/307-MIPS-BCM63XX-allow-second-UART-on-BCM6328.patch
+++ b/target/linux/brcm63xx/patches-3.8/305-MIPS-BCM63XX-allow-second-UART-on-BCM6328.patch
diff --git a/target/linux/brcm63xx/patches-3.8/308-MIPS-BCM63XX-expose-the-HS-SPI-clock.patch b/target/linux/brcm63xx/patches-3.8/306-MIPS-BCM63XX-expose-the-HS-SPI-clock.patch
index c8040b2..6b3b980 100644
--- a/target/linux/brcm63xx/patches-3.8/308-MIPS-BCM63XX-expose-the-HS-SPI-clock.patch
+++ b/target/linux/brcm63xx/patches-3.8/306-MIPS-BCM63XX-expose-the-HS-SPI-clock.patch
@@ -10,7 +10,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
-@@ -217,6 +217,26 @@ static struct clk clk_spi = {
+@@ -236,6 +236,26 @@ static struct clk clk_spi = {
};
/*
@@ -37,7 +37,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* XTM clock
*/
static void xtm_set(struct clk *clk, int enable)
-@@ -319,6 +339,8 @@ struct clk *clk_get(struct device *dev,
+@@ -344,6 +364,8 @@ struct clk *clk_get(struct device *dev,
return &clk_usbd;
if (!strcmp(id, "spi"))
return &clk_spi;
diff --git a/target/linux/brcm63xx/patches-3.8/309-MIPS-BCM63XX-add-HSSPI-register-definitions.patch b/target/linux/brcm63xx/patches-3.8/307-MIPS-BCM63XX-add-HSSPI-register-definitions.patch
index 605253a..1749127 100644
--- a/target/linux/brcm63xx/patches-3.8/309-MIPS-BCM63XX-add-HSSPI-register-definitions.patch
+++ b/target/linux/brcm63xx/patches-3.8/307-MIPS-BCM63XX-add-HSSPI-register-definitions.patch
@@ -11,7 +11,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -116,6 +116,7 @@ enum bcm63xx_regs_set {
+@@ -131,6 +131,7 @@ enum bcm63xx_regs_set {
RSET_UART1,
RSET_GPIO,
RSET_SPI,
@@ -19,7 +19,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
RSET_UDC0,
RSET_OHCI0,
RSET_OHCI_PRIV,
-@@ -161,6 +162,7 @@ enum bcm63xx_regs_set {
+@@ -176,6 +177,7 @@ enum bcm63xx_regs_set {
#define RSET_ENETDMA_SIZE 2048
#define RSET_ENETSW_SIZE 65536
#define RSET_UART_SIZE 24
@@ -27,7 +27,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
#define RSET_UDC_SIZE 256
#define RSET_OHCI_SIZE 256
#define RSET_EHCI_SIZE 256
-@@ -186,6 +188,7 @@ enum bcm63xx_regs_set {
+@@ -201,6 +203,7 @@ enum bcm63xx_regs_set {
#define BCM_6328_UART1_BASE (0xb0000120)
#define BCM_6328_GPIO_BASE (0xb0000080)
#define BCM_6328_SPI_BASE (0xdeadbeef)
@@ -35,7 +35,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
#define BCM_6328_UDC0_BASE (0xdeadbeef)
#define BCM_6328_USBDMA_BASE (0xb000c000)
#define BCM_6328_OHCI0_BASE (0xb0002600)
-@@ -232,6 +235,7 @@ enum bcm63xx_regs_set {
+@@ -247,6 +250,7 @@ enum bcm63xx_regs_set {
#define BCM_6338_UART1_BASE (0xdeadbeef)
#define BCM_6338_GPIO_BASE (0xfffe0400)
#define BCM_6338_SPI_BASE (0xfffe0c00)
@@ -43,7 +43,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
#define BCM_6338_UDC0_BASE (0xdeadbeef)
#define BCM_6338_USBDMA_BASE (0xfffe2400)
#define BCM_6338_OHCI0_BASE (0xdeadbeef)
-@@ -279,6 +283,7 @@ enum bcm63xx_regs_set {
+@@ -294,6 +298,7 @@ enum bcm63xx_regs_set {
#define BCM_6345_UART1_BASE (0xdeadbeef)
#define BCM_6345_GPIO_BASE (0xfffe0400)
#define BCM_6345_SPI_BASE (0xdeadbeef)
@@ -51,7 +51,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
#define BCM_6345_UDC0_BASE (0xdeadbeef)
#define BCM_6345_USBDMA_BASE (0xfffe2800)
#define BCM_6345_ENET0_BASE (0xfffe1800)
-@@ -325,6 +330,7 @@ enum bcm63xx_regs_set {
+@@ -340,6 +345,7 @@ enum bcm63xx_regs_set {
#define BCM_6348_UART1_BASE (0xdeadbeef)
#define BCM_6348_GPIO_BASE (0xfffe0400)
#define BCM_6348_SPI_BASE (0xfffe0c00)
@@ -59,7 +59,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
#define BCM_6348_UDC0_BASE (0xfffe1000)
#define BCM_6348_USBDMA_BASE (0xdeadbeef)
#define BCM_6348_OHCI0_BASE (0xfffe1b00)
-@@ -370,6 +376,7 @@ enum bcm63xx_regs_set {
+@@ -385,6 +391,7 @@ enum bcm63xx_regs_set {
#define BCM_6358_UART1_BASE (0xfffe0120)
#define BCM_6358_GPIO_BASE (0xfffe0080)
#define BCM_6358_SPI_BASE (0xfffe0800)
@@ -67,7 +67,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
#define BCM_6358_UDC0_BASE (0xfffe0800)
#define BCM_6358_USBDMA_BASE (0xdeadbeef)
#define BCM_6358_OHCI0_BASE (0xfffe1400)
-@@ -416,6 +423,7 @@ enum bcm63xx_regs_set {
+@@ -487,6 +494,7 @@ enum bcm63xx_regs_set {
#define BCM_6368_UART1_BASE (0xb0000120)
#define BCM_6368_GPIO_BASE (0xb0000080)
#define BCM_6368_SPI_BASE (0xb0000800)
@@ -75,7 +75,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
#define BCM_6368_UDC0_BASE (0xdeadbeef)
#define BCM_6368_USBDMA_BASE (0xb0004800)
#define BCM_6368_OHCI0_BASE (0xb0001600)
-@@ -467,6 +475,7 @@ extern const unsigned long *bcm63xx_regs
+@@ -538,6 +546,7 @@ extern const unsigned long *bcm63xx_regs
__GEN_RSET_BASE(__cpu, UART1) \
__GEN_RSET_BASE(__cpu, GPIO) \
__GEN_RSET_BASE(__cpu, SPI) \
@@ -83,7 +83,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
__GEN_RSET_BASE(__cpu, UDC0) \
__GEN_RSET_BASE(__cpu, OHCI0) \
__GEN_RSET_BASE(__cpu, OHCI_PRIV) \
-@@ -510,6 +519,7 @@ extern const unsigned long *bcm63xx_regs
+@@ -581,6 +590,7 @@ extern const unsigned long *bcm63xx_regs
[RSET_UART1] = BCM_## __cpu ##_UART1_BASE, \
[RSET_GPIO] = BCM_## __cpu ##_GPIO_BASE, \
[RSET_SPI] = BCM_## __cpu ##_SPI_BASE, \
@@ -91,7 +91,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
[RSET_UDC0] = BCM_## __cpu ##_UDC0_BASE, \
[RSET_OHCI0] = BCM_## __cpu ##_OHCI0_BASE, \
[RSET_OHCI_PRIV] = BCM_## __cpu ##_OHCI_PRIV_BASE, \
-@@ -584,6 +594,7 @@ enum bcm63xx_irq {
+@@ -658,6 +668,7 @@ enum bcm63xx_irq {
IRQ_ENET0,
IRQ_ENET1,
IRQ_ENET_PHY,
@@ -99,7 +99,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
IRQ_OHCI0,
IRQ_EHCI0,
IRQ_USBD,
-@@ -626,6 +637,7 @@ enum bcm63xx_irq {
+@@ -700,6 +711,7 @@ enum bcm63xx_irq {
#define BCM_6328_ENET0_IRQ 0
#define BCM_6328_ENET1_IRQ 0
#define BCM_6328_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12)
@@ -107,7 +107,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
#define BCM_6328_OHCI0_IRQ (BCM_6328_HIGH_IRQ_BASE + 9)
#define BCM_6328_EHCI0_IRQ (BCM_6328_HIGH_IRQ_BASE + 10)
#define BCM_6328_USBD_IRQ (IRQ_INTERNAL_BASE + 4)
-@@ -671,6 +683,7 @@ enum bcm63xx_irq {
+@@ -745,6 +757,7 @@ enum bcm63xx_irq {
#define BCM_6338_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
#define BCM_6338_ENET1_IRQ 0
#define BCM_6338_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9)
@@ -115,7 +115,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
#define BCM_6338_OHCI0_IRQ 0
#define BCM_6338_EHCI0_IRQ 0
#define BCM_6338_USBD_IRQ 0
-@@ -709,6 +722,7 @@ enum bcm63xx_irq {
+@@ -783,6 +796,7 @@ enum bcm63xx_irq {
#define BCM_6345_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
#define BCM_6345_ENET1_IRQ 0
#define BCM_6345_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12)
@@ -123,7 +123,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
#define BCM_6345_OHCI0_IRQ 0
#define BCM_6345_EHCI0_IRQ 0
#define BCM_6345_USBD_IRQ 0
-@@ -747,6 +761,7 @@ enum bcm63xx_irq {
+@@ -821,6 +835,7 @@ enum bcm63xx_irq {
#define BCM_6348_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
#define BCM_6348_ENET1_IRQ (IRQ_INTERNAL_BASE + 7)
#define BCM_6348_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9)
@@ -131,7 +131,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
#define BCM_6348_OHCI0_IRQ (IRQ_INTERNAL_BASE + 12)
#define BCM_6348_EHCI0_IRQ 0
#define BCM_6348_USBD_IRQ 0
-@@ -785,6 +800,7 @@ enum bcm63xx_irq {
+@@ -859,6 +874,7 @@ enum bcm63xx_irq {
#define BCM_6358_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
#define BCM_6358_ENET1_IRQ (IRQ_INTERNAL_BASE + 6)
#define BCM_6358_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9)
@@ -139,7 +139,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
#define BCM_6358_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5)
#define BCM_6358_EHCI0_IRQ (IRQ_INTERNAL_BASE + 10)
#define BCM_6358_USBD_IRQ 0
-@@ -832,6 +848,7 @@ enum bcm63xx_irq {
+@@ -971,6 +987,7 @@ enum bcm63xx_irq {
#define BCM_6368_ENET0_IRQ 0
#define BCM_6368_ENET1_IRQ 0
#define BCM_6368_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 15)
@@ -147,7 +147,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
#define BCM_6368_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5)
#define BCM_6368_EHCI0_IRQ (IRQ_INTERNAL_BASE + 7)
#define BCM_6368_USBD_IRQ (IRQ_INTERNAL_BASE + 8)
-@@ -879,6 +896,7 @@ extern const int *bcm63xx_irqs;
+@@ -1018,6 +1035,7 @@ extern const int *bcm63xx_irqs;
[IRQ_ENET0] = BCM_## __cpu ##_ENET0_IRQ, \
[IRQ_ENET1] = BCM_## __cpu ##_ENET1_IRQ, \
[IRQ_ENET_PHY] = BCM_## __cpu ##_ENET_PHY_IRQ, \
@@ -157,7 +157,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
[IRQ_USBD] = BCM_## __cpu ##_USBD_IRQ, \
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1409,4 +1409,51 @@
+@@ -1434,4 +1434,51 @@
#define PCIE_DEVICE_OFFSET 0x8000
diff --git a/target/linux/brcm63xx/patches-3.8/310-board_leds_naming.patch b/target/linux/brcm63xx/patches-3.8/308-board_leds_naming.patch
index c441bf1..c441bf1 100644
--- a/target/linux/brcm63xx/patches-3.8/310-board_leds_naming.patch
+++ b/target/linux/brcm63xx/patches-3.8/308-board_leds_naming.patch
diff --git a/target/linux/brcm63xx/patches-3.8/311-cfe_version_mod.patch b/target/linux/brcm63xx/patches-3.8/309-cfe_version_mod.patch
index a05b9a5..f350d21 100644
--- a/target/linux/brcm63xx/patches-3.8/311-cfe_version_mod.patch
+++ b/target/linux/brcm63xx/patches-3.8/309-cfe_version_mod.patch
@@ -11,7 +11,7 @@
printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
--- a/drivers/mtd/bcm63xxpart.c
+++ b/drivers/mtd/bcm63xxpart.c
-@@ -54,10 +54,10 @@ static int bcm63xx_detect_cfe(struct mtd
+@@ -56,10 +56,10 @@ static int bcm63xx_detect_cfe(struct mtd
if (ret)
return ret;
diff --git a/target/linux/brcm63xx/patches-3.8/404-bcm963xx_flashmap.patch b/target/linux/brcm63xx/patches-3.8/400-bcm963xx_flashmap.patch
index 1aadfff..1aadfff 100644
--- a/target/linux/brcm63xx/patches-3.8/404-bcm963xx_flashmap.patch
+++ b/target/linux/brcm63xx/patches-3.8/400-bcm963xx_flashmap.patch
diff --git a/target/linux/brcm63xx/patches-3.8/405-bcm963xx_real_rootfs_length.patch b/target/linux/brcm63xx/patches-3.8/401-bcm963xx_real_rootfs_length.patch
index 955c32f..e5d0208 100644
--- a/target/linux/brcm63xx/patches-3.8/405-bcm963xx_real_rootfs_length.patch
+++ b/target/linux/brcm63xx/patches-3.8/401-bcm963xx_real_rootfs_length.patch
@@ -15,7 +15,7 @@
/* 240-255: Unused at present */
--- a/drivers/mtd/bcm63xxpart.c
+++ b/drivers/mtd/bcm63xxpart.c
-@@ -131,7 +131,8 @@ static int bcm63xx_parse_cfe_partitions(
+@@ -134,7 +134,8 @@ static int bcm63xx_parse_cfe_partitions(
} else {
/* OpenWrt layout */
rootfsaddr = kerneladdr + kernellen;
diff --git a/target/linux/brcm63xx/patches-3.8/406_bcm63xx_enet_vlan_incoming_fixed.patch b/target/linux/brcm63xx/patches-3.8/402_bcm63xx_enet_vlan_incoming_fixed.patch
index 7d9f4a9..7d9f4a9 100644
--- a/target/linux/brcm63xx/patches-3.8/406_bcm63xx_enet_vlan_incoming_fixed.patch
+++ b/target/linux/brcm63xx/patches-3.8/402_bcm63xx_enet_vlan_incoming_fixed.patch
diff --git a/target/linux/brcm63xx/patches-3.8/408-6358-enet1-external-mii-clk.patch b/target/linux/brcm63xx/patches-3.8/403-6358-enet1-external-mii-clk.patch
index 4ead53f..4ead53f 100644
--- a/target/linux/brcm63xx/patches-3.8/408-6358-enet1-external-mii-clk.patch
+++ b/target/linux/brcm63xx/patches-3.8/403-6358-enet1-external-mii-clk.patch
diff --git a/target/linux/brcm63xx/patches-3.8/410-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch b/target/linux/brcm63xx/patches-3.8/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
index c8bfb32..af5b701 100644
--- a/target/linux/brcm63xx/patches-3.8/410-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
+++ b/target/linux/brcm63xx/patches-3.8/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
@@ -100,7 +100,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
return 0;
}
-@@ -1714,6 +1673,8 @@ static int bcm_enet_probe(struct platfor
+@@ -1708,6 +1667,8 @@ static int bcm_enet_probe(struct platfor
/* MII bus registration */
if (priv->has_phy) {
@@ -109,7 +109,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
priv->mii_bus = mdiobus_alloc();
if (!priv->mii_bus) {
-@@ -1750,6 +1711,38 @@ static int bcm_enet_probe(struct platfor
+@@ -1745,6 +1706,38 @@ static int bcm_enet_probe(struct platfor
dev_err(&pdev->dev, "unable to register mdio bus\n");
goto out_free_mdio;
}
@@ -148,22 +148,22 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
} else {
/* run platform code to initialize PHY device */
-@@ -1795,6 +1788,9 @@ static int bcm_enet_probe(struct platfor
+@@ -1790,6 +1783,9 @@ static int bcm_enet_probe(struct platfor
return 0;
out_unregister_mdio:
+ if (priv->phydev)
+ phy_disconnect(priv->phydev);
+
- if (priv->mii_bus) {
+ if (priv->mii_bus)
mdiobus_unregister(priv->mii_bus);
- kfree(priv->mii_bus->irq);
-@@ -1845,6 +1841,8 @@ static int bcm_enet_remove(struct platfo
+
+@@ -1831,6 +1827,8 @@ static int bcm_enet_remove(struct platfo
enet_writel(priv, 0, ENET_MIISC_REG);
if (priv->has_phy) {
+ phy_disconnect(priv->phydev);
+ priv->phydev = NULL;
mdiobus_unregister(priv->mii_bus);
- kfree(priv->mii_bus->irq);
mdiobus_free(priv->mii_bus);
+ } else {
diff --git a/target/linux/brcm63xx/patches-3.8/411-bcm63xx_enet-implement-reset_autoneg-ethtool.patch b/target/linux/brcm63xx/patches-3.8/405-bcm63xx_enet-implement-reset_autoneg-ethtool.patch
index d143b47..d143b47 100644
--- a/target/linux/brcm63xx/patches-3.8/411-bcm63xx_enet-implement-reset_autoneg-ethtool.patch
+++ b/target/linux/brcm63xx/patches-3.8/405-bcm63xx_enet-implement-reset_autoneg-ethtool.patch
diff --git a/target/linux/brcm63xx/patches-3.8/414-bcm63xx_enet-split-dma-registers-access.patch b/target/linux/brcm63xx/patches-3.8/406-bcm63xx_enet-split-dma-registers-access.patch
index a194685..d9bcef9 100644
--- a/target/linux/brcm63xx/patches-3.8/414-bcm63xx_enet-split-dma-registers-access.patch
+++ b/target/linux/brcm63xx/patches-3.8/406-bcm63xx_enet-split-dma-registers-access.patch
@@ -1,13 +1,13 @@
-From 305579c1f946ed1aa6c125252ace21c53d47c11d Mon Sep 17 00:00:00 2001
+From 2e5b0197443fcb454ca88619e36bb33d7a79e3ea Mon Sep 17 00:00:00 2001
From: Maxime Bizon <mbizon@freebox.fr>
Date: Thu, 21 Jan 2010 17:50:54 +0100
-Subject: [PATCH 30/63] bcm63xx_enet: split dma registers access.
+Subject: [PATCH] bcm63xx_enet: split dma registers access.
---
arch/mips/bcm63xx/dev-enet.c | 23 +++-
arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 4 +-
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 179 ++++++++++++++--------
- 3 files changed, 138 insertions(+), 68 deletions(-)
+ drivers/net/ethernet/broadcom/bcm63xx_enet.c | 144 +++++++++++++---------
+ 3 files changed, 111 insertions(+), 62 deletions(-)
--- a/arch/mips/bcm63xx/dev-enet.c
+++ b/arch/mips/bcm63xx/dev-enet.c
@@ -304,78 +304,34 @@ Subject: [PATCH 30/63] bcm63xx_enet: split dma registers access.
return -ENODEV;
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-@@ -1904,30 +1926,61 @@ struct platform_driver bcm63xx_enet_driv
+@@ -1883,14 +1905,24 @@ struct platform_driver bcm63xx_enet_driv
static int bcm_enet_shared_probe(struct platform_device *pdev)
{
struct resource *res;
-+ int ret, i, requested[3];
++ void __iomem *p[3];
++ unsigned int i;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENODEV;
-+ memset(bcm_enet_shared_base, 0, sizeof (bcm_enet_shared_base));
-+ memset(requested, 0, sizeof (requested));
++ memset(bcm_enet_shared_base, 0, sizeof(bcm_enet_shared_base));
-- if (!request_mem_region(res->start, resource_size(res),
-- "bcm63xx_enet_dma"))
-- return -EBUSY;
-+ for (i = 0; i < 3; i++) {
-+ void __iomem *p;
-
-- bcm_enet_shared_base = ioremap(res->start, resource_size(res));
-- if (!bcm_enet_shared_base) {
-- release_mem_region(res->start, resource_size(res));
+- bcm_enet_shared_base = devm_request_and_ioremap(&pdev->dev, res);
+- if (!bcm_enet_shared_base)
- return -ENOMEM;
++ for (i = 0; i < 3; i++) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-+ if (!res) {
-+ ret = -EINVAL;
-+ goto fail;
-+ }
-+
-+ if (!request_mem_region(res->start, resource_size(res),
-+ "bcm63xx_enet_dma")) {
-+ ret = -EBUSY;
-+ goto fail;
-+ }
-+ requested[i] = 0;
++ if (!res)
++ return -EINVAL;
+
-+ p = ioremap(res->start, resource_size(res));
-+ if (!p) {
-+ ret = -ENOMEM;
-+ goto fail;
-+ }
++ p[i] = devm_request_and_ioremap(&pdev->dev, res);
++ if (!p[i])
++ return -ENOMEM;
+
+ bcm_enet_shared_base[i] = p;
- }
-+
- return 0;
-+
-+fail:
-+ for (i = 0; i < 3; i++) {
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-+ if (!res)
-+ continue;
-+ if (bcm_enet_shared_base[i])
-+ iounmap(bcm_enet_shared_base[i]);
-+ if (requested[i])
-+ release_mem_region(res->start, resource_size(res));
+ }
-+ return ret;
- }
-
- static int bcm_enet_shared_remove(struct platform_device *pdev)
- {
- struct resource *res;
-+ int i;
++
++ memcpy(bcm_enet_shared_base, p, sizeof(bcm_enet_shared_base));
-- iounmap(bcm_enet_shared_base);
-- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-- release_mem_region(res->start, resource_size(res));
-+ for (i = 0; i < 3; i++) {
-+ iounmap(bcm_enet_shared_base[i]);
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-+ release_mem_region(res->start, resource_size(res));
-+ }
return 0;
}
-
diff --git a/target/linux/brcm63xx/patches-3.8/415-bcm63xx_enet-add-support-for-bcm6368-internal-ethern.patch b/target/linux/brcm63xx/patches-3.8/407-bcm63xx_enet-add-support-for-bcm6368-internal-ethern.patch
index ef61519..c9abd0a 100644
--- a/target/linux/brcm63xx/patches-3.8/415-bcm63xx_enet-add-support-for-bcm6368-internal-ethern.patch
+++ b/target/linux/brcm63xx/patches-3.8/407-bcm63xx_enet-add-support-for-bcm6368-internal-ethern.patch
@@ -1,47 +1,33 @@
-From 1324bb5db6815d19b09c1b7bcac3cc2804412205 Mon Sep 17 00:00:00 2001
+From d16c1a1410f6c35a835baaa445774b4421db6c96 Mon Sep 17 00:00:00 2001
From: Maxime Bizon <mbizon@freebox.fr>
Date: Sat, 23 Jan 2010 03:01:02 +0100
-Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet switch.
+Subject: [PATCH 8/8] bcm63xx_enet: add support for bcm6368 internal ethernet
+ switch.
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
- arch/mips/bcm63xx/dev-enet.c | 106 ++-
- .../include/asm/mach-bcm63xx/bcm63xx_dev_enet.h | 25 +
+ arch/mips/bcm63xx/boards/board_bcm963xx.c | 4 +
+ arch/mips/bcm63xx/dev-enet.c | 113 ++-
+ .../include/asm/mach-bcm63xx/bcm63xx_dev_enet.h | 28 +
arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 50 +
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 1054 ++++++++++++++++++--
- drivers/net/ethernet/broadcom/bcm63xx_enet.h | 71 ++
- 5 files changed, 1221 insertions(+), 85 deletions(-)
+ .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h | 2 +
+ drivers/net/ethernet/broadcom/bcm63xx_enet.c | 1018 +++++++++++++++++++-
+ drivers/net/ethernet/broadcom/bcm63xx_enet.h | 75 ++
+ 8 files changed, 1239 insertions(+), 66 deletions(-)
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -927,6 +927,10 @@ int __init board_register_devices(void)
- if (board.has_usbd)
- bcm63xx_usbd_register(&board.usbd);
+@@ -924,6 +924,10 @@ int __init board_register_devices(void)
+ !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
+ bcm63xx_enet_register(1, &board.enet1);
+ if (board.has_enetsw &&
+ !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
+ bcm63xx_enetsw_register(&board.enetsw);
+
- if (board.has_ehci0)
- bcm63xx_ehci_register();
-
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -25,6 +25,7 @@ struct board_info {
- /* enabled feature/device */
- unsigned int has_enet0:1;
- unsigned int has_enet1:1;
-+ unsigned int has_enetsw:1;
- unsigned int has_pci:1;
- unsigned int has_pccard:1;
- unsigned int has_ohci0:1;
-@@ -37,6 +38,7 @@ struct board_info {
- /* ethernet config */
- struct bcm63xx_enet_platform_data enet0;
- struct bcm63xx_enet_platform_data enet1;
-+ struct bcm63xx_enetsw_platform_data enetsw;
+ if (board.has_usbd)
+ bcm63xx_usbd_register(&board.usbd);
- /* USB config */
- struct bcm63xx_usbd_platform_data usbd;
--- a/arch/mips/bcm63xx/dev-enet.c
+++ b/arch/mips/bcm63xx/dev-enet.c
@@ -104,6 +104,64 @@ static struct platform_device bcm63xx_en
@@ -85,7 +71,7 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
+ shared_res[0].end = shared_res[0].start;
+ shared_res[0].end += (RSET_ENETDMA_SIZE) - 1;
+
-+ if (BCMCPU_IS_6368())
++ if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368())
+ chan_count = 32;
+ else
+ chan_count = 16;
@@ -137,7 +123,7 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
if (unit == 0) {
enet0_res[0].start = bcm63xx_regset_address(RSET_ENET0);
-@@ -175,3 +218,30 @@ int __init bcm63xx_enet_register(int uni
+@@ -175,3 +218,37 @@ int __init bcm63xx_enet_register(int uni
return ret;
return 0;
}
@@ -147,7 +133,7 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
+{
+ int ret;
+
-+ if (!BCMCPU_IS_6368())
++ if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
+ return -ENODEV;
+
+ ret = register_shared();
@@ -159,8 +145,15 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
+ enetsw_res[0].end += RSET_ENETSW_SIZE - 1;
+ enetsw_res[1].start = bcm63xx_get_irq_number(IRQ_ENETSW_RXDMA0);
+ enetsw_res[2].start = bcm63xx_get_irq_number(IRQ_ENETSW_TXDMA0);
++ if (!enetsw_res[2].start)
++ enetsw_res[2].start = -1;
+
-+ memcpy(bcm63xx_enetsw_device.dev.platform_data, pd, sizeof (*pd));
++ memcpy(bcm63xx_enetsw_device.dev.platform_data, pd, sizeof(*pd));
++
++ if (BCMCPU_IS_6328())
++ enetsw_pd.num_ports = ENETSW_PORTS_6328;
++ else if (BCMCPU_IS_6362() || BCMCPU_IS_6368())
++ enetsw_pd.num_ports = ENETSW_PORTS_6368;
+
+ ret = platform_device_register(&bcm63xx_enetsw_device);
+ if (ret)
@@ -170,18 +163,21 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
+}
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-@@ -39,7 +39,32 @@ struct bcm63xx_enet_platform_data {
+@@ -39,7 +39,35 @@ struct bcm63xx_enet_platform_data {
int phy_id, int reg, int val));
};
+/*
+ * on board ethernet switch platform data
+ */
-+#define ENETSW_MAX_PORT 6
++#define ENETSW_MAX_PORT 8
++#define ENETSW_PORTS_6328 5 /* 4 FE PHY + 1 RGMII */
++#define ENETSW_PORTS_6368 6 /* 4 FE PHY + 2 RGMII */
++
++#define ENETSW_RGMII_PORT0 4
+
+struct bcm63xx_enetsw_port {
+ int used;
-+ int external_phy;
+ int phy_id;
+
+ int bypass_link;
@@ -193,14 +189,14 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
+
+struct bcm63xx_enetsw_platform_data {
+ char mac_addr[ETH_ALEN];
++ int num_ports;
+ struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
+};
+
int __init bcm63xx_enet_register(int unit,
const struct bcm63xx_enet_platform_data *pd);
-+int __init
-+bcm63xx_enetsw_register(const struct bcm63xx_enetsw_platform_data *pd);
++int bcm63xx_enetsw_register(const struct bcm63xx_enetsw_platform_data *pd);
+
#endif /* ! BCM63XX_DEV_ENET_H_ */
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
@@ -266,6 +262,24 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
/*************************************************************************
* _REG relative to RSET_OHCI_PRIV
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -25,6 +25,7 @@ struct board_info {
+ /* enabled feature/device */
+ unsigned int has_enet0:1;
+ unsigned int has_enet1:1;
++ unsigned int has_enetsw:1;
+ unsigned int has_pci:1;
+ unsigned int has_pccard:1;
+ unsigned int has_ohci0:1;
+@@ -37,6 +38,7 @@ struct board_info {
+ /* ethernet config */
+ struct bcm63xx_enet_platform_data enet0;
+ struct bcm63xx_enet_platform_data enet1;
++ struct bcm63xx_enetsw_platform_data enetsw;
+
+ /* USB config */
+ struct bcm63xx_usbd_platform_data usbd;
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
@@ -59,6 +59,49 @@ static inline void enet_writel(struct bc
@@ -318,22 +332,30 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
* io helpers to access shared registers
*/
static inline u32 enet_dma_readl(struct bcm_enet_priv *priv, u32 off)
-@@ -321,7 +364,8 @@ static int bcm_enet_receive_queue(struct
+@@ -218,7 +261,6 @@ static int bcm_enet_refill_rx(struct net
+ if (!skb)
+ break;
+ priv->rx_skb[desc_idx] = skb;
+-
+ p = dma_map_single(&priv->pdev->dev, skb->data,
+ priv->rx_skb_size,
+ DMA_FROM_DEVICE);
+@@ -321,7 +363,8 @@ static int bcm_enet_receive_queue(struct
}
/* recycle packet if it's marked as bad */
- if (unlikely(len_stat & DMADESC_ERR_MASK)) {
-+ if (!bcm_enet_is_sw(priv) &&
++ if (!priv->enet_is_sw &&
+ unlikely(len_stat & DMADESC_ERR_MASK)) {
dev->stats.rx_errors++;
if (len_stat & DMADESC_OVSIZE_MASK)
-@@ -552,6 +596,26 @@ static int bcm_enet_start_xmit(struct sk
+@@ -552,6 +595,26 @@ static int bcm_enet_start_xmit(struct sk
goto out_unlock;
}
+ /* pad small packets sent on a switch device */
-+ if (bcm_enet_is_sw(priv) && skb->len < 64) {
++ if (priv->enet_is_sw && skb->len < 64) {
+ int needed = 64 - skb->len;
+ char *data;
+
@@ -355,7 +377,38 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
/* point to the next available desc */
desc = &priv->tx_desc_cpu[priv->tx_curr_desc];
priv->tx_skb[priv->tx_curr_desc] = skb;
-@@ -1921,96 +1985,951 @@ struct platform_driver bcm63xx_enet_driv
+@@ -931,9 +994,9 @@ static int bcm_enet_open(struct net_devi
+ enet_writel(priv, priv->hw_mtu, ENET_TXMAXLEN_REG);
+
+ /* set dma maximum burst len */
+- enet_dmac_writel(priv, BCMENET_DMA_MAXBURST,
++ enet_dmac_writel(priv, priv->dma_maxburst,
+ ENETDMAC_MAXBURST_REG(priv->rx_chan));
+- enet_dmac_writel(priv, BCMENET_DMA_MAXBURST,
++ enet_dmac_writel(priv, priv->dma_maxburst,
+ ENETDMAC_MAXBURST_REG(priv->tx_chan));
+
+ /* set correct transmit fifo watermark */
+@@ -1529,7 +1592,7 @@ static int compute_hw_mtu(struct bcm_ene
+ * it's appended
+ */
+ priv->rx_skb_size = ALIGN(actual_mtu + ETH_FCS_LEN,
+- BCMENET_DMA_MAXBURST * 4);
++ priv->dma_maxburst * 4);
+ return 0;
+ }
+
+@@ -1636,6 +1699,9 @@ static int bcm_enet_probe(struct platfor
+ return -ENOMEM;
+ priv = netdev_priv(dev);
+
++ priv->enet_is_sw = false;
++ priv->dma_maxburst = BCMENET_DMA_MAXBURST;
++
+ ret = compute_hw_mtu(priv, dev->mtu);
+ if (ret)
+ goto out;
+@@ -1900,65 +1966,928 @@ struct platform_driver bcm63xx_enet_driv
};
/*
@@ -367,17 +420,19 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
+ int ext, int phy_id, int location)
{
- struct resource *res;
-- int ret, i, requested[3];
+- void __iomem *p[3];
+- unsigned int i;
+ u32 reg;
+ int ret;
-- memset(bcm_enet_shared_base, 0, sizeof (bcm_enet_shared_base));
-- memset(requested, 0, sizeof (requested));
+- memset(bcm_enet_shared_base, 0, sizeof(bcm_enet_shared_base));
+ spin_lock_bh(&priv->enetsw_mdio_lock);
+ enetsw_writel(priv, 0, ENETSW_MDIOC_REG);
- for (i = 0; i < 3; i++) {
-- void __iomem *p;
+- res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+- if (!res)
+- return -EINVAL;
+ reg = ENETSW_MDIOC_RD_MASK |
+ (phy_id << ENETSW_MDIOC_PHYID_SHIFT) |
+ (location << ENETSW_MDIOC_REG_SHIFT);
@@ -392,77 +447,62 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
+ return ret;
+}
-- res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-- if (!res) {
-- ret = -EINVAL;
-- goto fail;
-- }
+- p[i] = devm_request_and_ioremap(&pdev->dev, res);
+- if (!p[i])
+- return -ENOMEM;
+static void bcmenet_sw_mdio_write(struct bcm_enet_priv *priv,
+ int ext, int phy_id, int location,
+ uint16_t data)
+{
+ u32 reg;
-- if (!request_mem_region(res->start, resource_size(res),
-- "bcm63xx_enet_dma")) {
-- ret = -EBUSY;
-- goto fail;
-- }
-- requested[i] = 0;
+- bcm_enet_shared_base[i] = p;
+- }
+ spin_lock_bh(&priv->enetsw_mdio_lock);
+ enetsw_writel(priv, 0, ENETSW_MDIOC_REG);
-- p = ioremap(res->start, resource_size(res));
-- if (!p) {
-- ret = -ENOMEM;
-- goto fail;
-- }
+- memcpy(bcm_enet_shared_base, p, sizeof(bcm_enet_shared_base));
+ reg = ENETSW_MDIOC_WR_MASK |
+ (phy_id << ENETSW_MDIOC_PHYID_SHIFT) |
+ (location << ENETSW_MDIOC_REG_SHIFT);
-- bcm_enet_shared_base[i] = p;
-- }
+- return 0;
+-}
+ if (ext)
+ reg |= ENETSW_MDIOC_EXT_MASK;
+-static int bcm_enet_shared_remove(struct platform_device *pdev)
+-{
- return 0;
+ reg |= data;
-
--fail:
-- for (i = 0; i < 3; i++) {
-- res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-- if (!res)
-- continue;
-- if (bcm_enet_shared_base[i])
-- iounmap(bcm_enet_shared_base[i]);
-- if (requested[i])
-- release_mem_region(res->start, resource_size(res));
-- }
-- return ret;
++
+ enetsw_writel(priv, reg, ENETSW_MDIOC_REG);
+ udelay(50);
+ spin_unlock_bh(&priv->enetsw_mdio_lock);
}
--static int bcm_enet_shared_remove(struct platform_device *pdev)
-+/*
+ /*
+- * this "shared" driver is needed because both macs share a single
+- * address space
+ * enet sw PHY polling
-+ */
+ */
+-struct platform_driver bcm63xx_enet_shared_driver = {
+- .probe = bcm_enet_shared_probe,
+- .remove = bcm_enet_shared_remove,
+- .driver = {
+- .name = "bcm63xx_enet_shared",
+- .owner = THIS_MODULE,
+- },
+-};
+static void swphy_poll_timer(unsigned long data)
- {
-- struct resource *res;
-- int i;
++{
+ struct bcm_enet_priv *priv = (struct bcm_enet_priv *)data;
+ unsigned int i;
-
-- for (i = 0; i < 3; i++) {
-- iounmap(bcm_enet_shared_base[i]);
-- res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-- release_mem_region(res->start, resource_size(res));
-+ for (i = 0; i < ARRAY_SIZE(priv->used_ports); i++) {
++
++ for (i = 0; i < priv->num_ports; i++) {
+ struct bcm63xx_enetsw_port *port;
+ int val, j, up, advertise, lpa, lpa2, speed, duplex, media;
++ int external_phy = bcm_enet_port_is_rgmii(i);
+ u8 override;
+
+ port = &priv->used_ports[i];
@@ -474,7 +514,7 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
+
+ /* dummy read to clear */
+ for (j = 0; j < 2; j++)
-+ val = bcmenet_sw_mdio_read(priv, port->external_phy,
++ val = bcmenet_sw_mdio_read(priv, external_phy,
+ port->phy_id, MII_BMSR);
+
+ if (val == 0xffff)
@@ -498,14 +538,14 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
+ continue;
+ }
+
-+ advertise = bcmenet_sw_mdio_read(priv, port->external_phy,
++ advertise = bcmenet_sw_mdio_read(priv, external_phy,
+ port->phy_id, MII_ADVERTISE);
+
-+ lpa = bcmenet_sw_mdio_read(priv, port->external_phy,
-+ port->phy_id, MII_LPA);
++ lpa = bcmenet_sw_mdio_read(priv, external_phy, port->phy_id,
++ MII_LPA);
+
-+ lpa2 = bcmenet_sw_mdio_read(priv, port->external_phy,
-+ port->phy_id, MII_STAT1000);
++ lpa2 = bcmenet_sw_mdio_read(priv, external_phy, port->phy_id,
++ MII_STAT1000);
+
+ /* figure out media and duplex from advertise and LPA values */
+ media = mii_nway_result(lpa & advertise);
@@ -538,22 +578,8 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
+
+ enetsw_writeb(priv, override, ENETSW_PORTOV_REG(i));
+ enetsw_writeb(priv, 0, ENETSW_PTCTRL_REG(i));
- }
-- return 0;
--}
-
--/*
-- * this "shared" driver is needed because both macs share a single
-- * address space
-- */
--struct platform_driver bcm63xx_enet_shared_driver = {
-- .probe = bcm_enet_shared_probe,
-- .remove = bcm_enet_shared_remove,
-- .driver = {
-- .name = "bcm63xx_enet_shared",
-- .owner = THIS_MODULE,
-- },
--};
++ }
++
+ priv->swphy_poll.expires = jiffies + HZ;
+ add_timer(&priv->swphy_poll);
+}
@@ -574,9 +600,12 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
+ u32 val;
- ret = platform_driver_register(&bcm63xx_enet_shared_driver);
+- if (ret)
+- return ret;
+ priv = netdev_priv(dev);
+ kdev = &priv->pdev->dev;
-+
+
+- ret = platform_driver_register(&bcm63xx_enet_driver);
+ /* mask all interrupts and request them */
+ enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->rx_chan));
+ enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->tx_chan));
@@ -584,15 +613,15 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
+ ret = request_irq(priv->irq_rx, bcm_enet_isr_dma,
+ IRQF_DISABLED, dev->name, dev);
if (ret)
-- return ret;
-+ goto out_freeirq;
-
-- ret = platform_driver_register(&bcm63xx_enet_driver);
-+ ret = request_irq(priv->irq_tx, bcm_enet_isr_dma,
-+ IRQF_DISABLED, dev->name, dev);
- if (ret)
- platform_driver_unregister(&bcm63xx_enet_shared_driver);
-+ goto out_freeirq_rx;
++ goto out_freeirq;
++
++ if (priv->irq_tx != -1) {
++ ret = request_irq(priv->irq_tx, bcm_enet_isr_dma,
++ IRQF_DISABLED, dev->name, dev);
++ if (ret)
++ goto out_freeirq_rx;
++ }
+
+ /* allocate rx dma ring */
+ size = priv->rx_ring_size * sizeof(struct bcm_enet_desc);
@@ -647,12 +676,14 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
+ priv->rx_curr_desc = 0;
+
+ /* disable all ports */
-+ for (i = 0; i < 6; i++) {
++ for (i = 0; i < priv->num_ports; i++) {
+ enetsw_writeb(priv, ENETSW_PORTOV_ENABLE_MASK,
+ ENETSW_PORTOV_REG(i));
+ enetsw_writeb(priv, ENETSW_PTCTRL_RXDIS_MASK |
+ ENETSW_PTCTRL_TXDIS_MASK,
+ ENETSW_PTCTRL_REG(i));
++
++ priv->sw_port_link[i] = 0;
+ }
+
+ /* reset mib */
@@ -703,9 +734,9 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
+ enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG(priv->tx_chan));
+
+ /* set dma maximum burst len */
-+ enet_dmac_writel(priv, BCMENET_DMA_MAXBURST,
++ enet_dmac_writel(priv, priv->dma_maxburst,
+ ENETDMAC_MAXBURST_REG(priv->rx_chan));
-+ enet_dmac_writel(priv, BCMENET_DMA_MAXBURST,
++ enet_dmac_writel(priv, priv->dma_maxburst,
+ ENETDMAC_MAXBURST_REG(priv->tx_chan));
+
+ /* set flow control low/high threshold to 1/3 / 2/3 */
@@ -741,7 +772,7 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
+ /*
+ * apply override config for bypass_link ports here.
+ */
-+ for (i = 0; i < ARRAY_SIZE(priv->used_ports); i++) {
++ for (i = 0; i < priv->num_ports; i++) {
+ struct bcm63xx_enetsw_port *port;
+ u8 override;
+ port = &priv->used_ports[i];
@@ -764,14 +795,13 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
+ case 10:
+ break;
+ default:
-+ printk(KERN_WARNING "invalid forced speed on port %s: "
-+ "assume 10\n",
++ printk(KERN_WARNING "invalid forced speed on port %s: assume 10\n",
+ port->name);
+ break;
+ }
+
+ if (port->force_duplex_full)
-+ override = ENETSW_IMPOV_FDX_MASK;
++ override |= ENETSW_IMPOV_FDX_MASK;
+
+
+ enetsw_writeb(priv, override, ENETSW_PORTOV_REG(i));
@@ -812,7 +842,8 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
+ priv->rx_desc_cpu, priv->rx_desc_dma);
+
+out_freeirq_tx:
-+ free_irq(priv->irq_tx, dev);
++ if (priv->irq_tx != -1)
++ free_irq(priv->irq_tx, dev);
+
+out_freeirq_rx:
+ free_irq(priv->irq_rx, dev);
@@ -869,7 +900,8 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
+ priv->rx_desc_cpu, priv->rx_desc_dma);
+ dma_free_coherent(kdev, priv->tx_desc_alloc_size,
+ priv->tx_desc_cpu, priv->tx_desc_dma);
-+ free_irq(priv->irq_tx, dev);
++ if (priv->irq_tx != -1)
++ free_irq(priv->irq_tx, dev);
+ free_irq(priv->irq_rx, dev);
+
+ return 0;
@@ -885,15 +917,15 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
+{
+ int i;
+
-+ for (i = 0; i < (int)ARRAY_SIZE(priv->used_ports); ++i) {
++ for (i = 0; i < priv->num_ports; ++i) {
+ if (!priv->used_ports[i].used)
+ continue;
+ if (priv->used_ports[i].phy_id == phy_id)
-+ return priv->used_ports[i].external_phy;
++ return bcm_enet_port_is_rgmii(i);
+ }
+
-+ printk_once(KERN_WARNING "bcm63xx_enet: could not find a used port "
-+ "with phy_id %i, assuming phy is external\n", phy_id);
++ printk_once(KERN_WARNING "bcm63xx_enet: could not find a used port with phy_id %i, assuming phy is external\n",
++ phy_id);
+ return 1;
+}
+
@@ -1061,8 +1093,9 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
+ if (s->sizeof_stat == sizeof(u64)) {
+ hi = enetsw_readl(priv, ENETSW_MIB_REG(reg + 1));
+ *(u64 *)p = ((u64)hi << 32 | lo);
-+ } else
++ } else {
+ *(u32 *)p = lo;
++ }
+ }
+
+ for (i = 0; i < BCM_ENETSW_STATS_LEN; i++) {
@@ -1152,7 +1185,7 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ irq_rx = platform_get_irq(pdev, 0);
+ irq_tx = platform_get_irq(pdev, 1);
-+ if (!res_mem || irq_rx < 0 || irq_tx < 0)
++ if (!res_mem || irq_rx < 0)
+ return -ENODEV;
+
+ ret = 0;
@@ -1163,16 +1196,19 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
+ memset(priv, 0, sizeof(*priv));
+
+ /* initialize default and fetch platform data */
++ priv->enet_is_sw = true;
+ priv->irq_rx = irq_rx;
+ priv->irq_tx = irq_tx;
+ priv->rx_ring_size = BCMENET_DEF_RX_DESC;
+ priv->tx_ring_size = BCMENET_DEF_TX_DESC;
++ priv->dma_maxburst = BCMENETSW_DMA_MAXBURST;
+
+ pd = pdev->dev.platform_data;
+ if (pd) {
+ memcpy(dev->dev_addr, pd->mac_addr, ETH_ALEN);
+ memcpy(priv->used_ports, pd->used_ports,
+ sizeof (pd->used_ports));
++ priv->num_ports = pd->num_ports;
+ }
+
+ ret = compute_hw_mtu(priv, dev->mtu);
@@ -1279,61 +1315,28 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
+static int bcm_enet_shared_probe(struct platform_device *pdev)
+{
+ struct resource *res;
-+ int ret, i, requested[3];
++ void __iomem *p[3];
++ unsigned int i;
+
-+ memset(bcm_enet_shared_base, 0, sizeof (bcm_enet_shared_base));
-+ memset(requested, 0, sizeof (requested));
++ memset(bcm_enet_shared_base, 0, sizeof(bcm_enet_shared_base));
+
+ for (i = 0; i < 3; i++) {
-+ void __iomem *p;
-+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-+ if (!res) {
-+ ret = -EINVAL;
-+ goto fail;
-+ }
-+
-+ if (!request_mem_region(res->start, resource_size(res),
-+ "bcm63xx_enet_dma")) {
-+ ret = -EBUSY;
-+ goto fail;
-+ }
-+ requested[i] = 0;
-+
-+ p = ioremap(res->start, resource_size(res));
-+ if (!p) {
-+ ret = -ENOMEM;
-+ goto fail;
-+ }
++ if (!res)
++ return -EINVAL;
+
-+ bcm_enet_shared_base[i] = p;
++ p[i] = devm_request_and_ioremap(&pdev->dev, res);
++ if (!p[i])
++ return -ENOMEM;
+ }
+
-+ return 0;
++ memcpy(bcm_enet_shared_base, p, sizeof(bcm_enet_shared_base));
+
-+fail:
-+ for (i = 0; i < 3; i++) {
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-+ if (!res)
-+ continue;
-+ if (bcm_enet_shared_base[i])
-+ iounmap(bcm_enet_shared_base[i]);
-+ if (requested[i])
-+ release_mem_region(res->start, resource_size(res));
-+ }
-+ return ret;
++ return 0;
+}
+
+static int bcm_enet_shared_remove(struct platform_device *pdev)
+{
-+ struct resource *res;
-+ int i;
-+
-+ for (i = 0; i < 3; i++) {
-+ iounmap(bcm_enet_shared_base[i]);
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-+ release_mem_region(res->start, resource_size(res));
-+ }
+ return 0;
+}
+
@@ -1373,7 +1376,7 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
return ret;
}
-@@ -2018,6 +2937,7 @@ static int __init bcm_enet_init(void)
+@@ -1966,6 +2895,7 @@ static int __init bcm_enet_init(void)
static void __exit bcm_enet_exit(void)
{
platform_driver_unregister(&bcm63xx_enet_driver);
@@ -1383,7 +1386,15 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -84,11 +84,60 @@
+@@ -18,6 +18,7 @@
+
+ /* maximum burst len for dma (4 bytes unit) */
+ #define BCMENET_DMA_MAXBURST 16
++#define BCMENETSW_DMA_MAXBURST 8
+
+ /* tx transmit threshold (4 bytes unit), fifo is 256 bytes, the value
+ * must be low enough so that a DMA transfer of above burst length can
+@@ -84,11 +85,60 @@
#define ETH_MIB_RX_CNTRL 54
@@ -1444,7 +1455,7 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
u32 tx_brdcast;
u32 tx_mult;
u32 tx_64;
-@@ -97,7 +146,12 @@ struct bcm_enet_mib_counters {
+@@ -97,7 +147,12 @@ struct bcm_enet_mib_counters {
u32 tx_256_511;
u32 tx_512_1023;
u32 tx_1024_max;
@@ -1457,7 +1468,7 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
u32 tx_ovr;
u32 tx_frag;
u32 tx_underrun;
-@@ -114,6 +168,7 @@ struct bcm_enet_mib_counters {
+@@ -114,6 +169,7 @@ struct bcm_enet_mib_counters {
u32 rx_all_octets;
u32 rx_all_pkts;
u32 rx_brdcast;
@@ -1465,12 +1476,25 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
u32 rx_mult;
u32 rx_64;
u32 rx_65_127;
-@@ -269,6 +324,22 @@ struct bcm_enet_priv {
+@@ -197,6 +253,9 @@ struct bcm_enet_priv {
+ /* number of dma desc in tx ring */
+ int tx_ring_size;
+
++ /* maximum dma burst size */
++ int dma_maxburst;
++
+ /* cpu view of rx dma ring */
+ struct bcm_enet_desc *tx_desc_cpu;
+
+@@ -269,6 +328,22 @@ struct bcm_enet_priv {
/* maximum hardware transmit/receive size */
unsigned int hw_mtu;
+
++ bool enet_is_sw;
++
+ /* port mapping for switch devices */
++ int num_ports;
+ struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
+ int sw_port_link[ENETSW_MAX_PORT];
+
@@ -1479,12 +1503,9 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
+ spinlock_t enetsw_mdio_lock;
};
-+static inline int bcm_enet_is_sw(struct bcm_enet_priv *priv)
++static inline int bcm_enet_port_is_rgmii(int portid)
+{
-+ if (BCMCPU_IS_6368())
-+ return 1;
-+ else
-+ return 0;
++ return portid >= ENETSW_RGMII_PORT0;
+}
+
#endif /* ! BCM63XX_ENET_H_ */
diff --git a/target/linux/brcm63xx/patches-3.8/422-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch b/target/linux/brcm63xx/patches-3.8/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
index 2de5ec0..f8e92dc 100644
--- a/target/linux/brcm63xx/patches-3.8/422-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
+++ b/target/linux/brcm63xx/patches-3.8/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
@@ -32,7 +32,7 @@ Subject: [PATCH 54/81] bcm63xx_enet: enable rgmii clock on external ports
#define ENETSW_MDIOC_EXT_MASK (1 << 16)
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2222,6 +2222,18 @@ static int bcm_enetsw_open(struct net_de
+@@ -2201,6 +2201,18 @@ static int bcm_enetsw_open(struct net_de
priv->sw_port_link[i] = 0;
}
diff --git a/target/linux/brcm63xx/patches-3.8/425-MIPS-BCM63XX-add-HS-SPI-platform-device-and-register.patch b/target/linux/brcm63xx/patches-3.8/409-MIPS-BCM63XX-add-HS-SPI-platform-device-and-register.patch
index babe04a..d659d7a 100644
--- a/target/linux/brcm63xx/patches-3.8/425-MIPS-BCM63XX-add-HS-SPI-platform-device-and-register.patch
+++ b/target/linux/brcm63xx/patches-3.8/409-MIPS-BCM63XX-add-HS-SPI-platform-device-and-register.patch
@@ -47,7 +47,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-hsspi.c
-@@ -0,0 +1,57 @@
+@@ -0,0 +1,60 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
@@ -93,7 +93,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+int __init bcm63xx_hsspi_register(void)
+{
+
-+ if (!BCMCPU_IS_6328())
++ if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362())
+ return -ENODEV;
+
+ spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
@@ -101,13 +101,16 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+ spi_resources[0].end += RSET_HSSPI_SIZE - 1;
+ spi_resources[1].start = bcm63xx_get_irq_number(IRQ_HSSPI);
+
-+ spi_pdata.speed_hz = HSSPI_PLL_HZ_6328;
++ if (BCMCPU_IS_6328())
++ spi_pdata.speed_hz = HSSPI_PLL_HZ_6328;
++ else if (BCMCPU_IS_6362())
++ spi_pdata.speed_hz = HSSPI_PLL_HZ_6362;
+
+ return platform_device_register(&bcm63xx_hsspi_device);
+}
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
-@@ -0,0 +1,20 @@
+@@ -0,0 +1,21 @@
+#ifndef BCM63XX_DEV_HSSPI_H
+#define BCM63XX_DEV_HSSPI_H
+
@@ -126,5 +129,6 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+#define bcm_hsspi_writel(v, o) bcm_rset_writel(RSET_HSSPI, (v), (o))
+
+#define HSSPI_PLL_HZ_6328 133333333
++#define HSSPI_PLL_HZ_6362 400000000
+
+#endif /* BCM63XX_DEV_HSSPI_H */
diff --git a/target/linux/brcm63xx/patches-3.8/426-SPI-MIPS-BCM63XX-Add-HS-SPI-driver.patch b/target/linux/brcm63xx/patches-3.8/410-SPI-MIPS-BCM63XX-Add-HS-SPI-driver.patch
index 06b8a45..e6b47c1 100644
--- a/target/linux/brcm63xx/patches-3.8/426-SPI-MIPS-BCM63XX-Add-HS-SPI-driver.patch
+++ b/target/linux/brcm63xx/patches-3.8/410-SPI-MIPS-BCM63XX-Add-HS-SPI-driver.patch
@@ -16,9 +16,9 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
-@@ -17,4 +17,6 @@ struct bcm63xx_hsspi_pdata {
-
+@@ -18,4 +18,6 @@ struct bcm63xx_hsspi_pdata {
#define HSSPI_PLL_HZ_6328 133333333
+ #define HSSPI_PLL_HZ_6362 400000000
+#define HSSPI_BUFFER_LEN 512
+
diff --git a/target/linux/brcm63xx/patches-3.8/427-MIPS-BCM63XX-Register-SPI-flash-if-present.patch b/target/linux/brcm63xx/patches-3.8/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch
index 75205c4..b062134 100644
--- a/target/linux/brcm63xx/patches-3.8/427-MIPS-BCM63XX-Register-SPI-flash-if-present.patch
+++ b/target/linux/brcm63xx/patches-3.8/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch
@@ -58,8 +58,8 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
return BCM63XX_FLASH_TYPE_SERIAL;
else
-@@ -79,6 +102,9 @@ static int __init bcm63xx_detect_flash_t
- return BCM63XX_FLASH_TYPE_SERIAL;
+@@ -85,6 +108,9 @@ static int __init bcm63xx_detect_flash_t
+ return BCM63XX_FLASH_TYPE_NAND;
case BCM6368_CPU_ID:
val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
+ if (val & STRAPBUS_6368_SPI_CLK_FAST)
@@ -68,7 +68,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
case STRAPBUS_6368_BOOT_SEL_NAND:
return BCM63XX_FLASH_TYPE_NAND;
-@@ -110,8 +136,11 @@ int __init bcm63xx_flash_register(void)
+@@ -116,8 +142,11 @@ int __init bcm63xx_flash_register(void)
return platform_device_register(&mtd_dev);
case BCM63XX_FLASH_TYPE_SERIAL:
@@ -92,7 +92,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
#define STRAPBUS_6368_BOOT_SEL_MASK 0x3
#define STRAPBUS_6368_BOOT_SEL_NAND 0
#define STRAPBUS_6368_BOOT_SEL_SERIAL 1
-@@ -1478,6 +1479,7 @@
+@@ -1443,6 +1444,7 @@
#define STRAPBUS_6362_BOOT_SEL_NAND (0 << 15)
#define MISC_STRAPBUS_6328_REG 0x240
diff --git a/target/linux/brcm63xx/patches-3.8/431-MTD-physmap-allow-passing-pp_data.patch b/target/linux/brcm63xx/patches-3.8/412-MTD-physmap-allow-passing-pp_data.patch
index de2216a..de2216a 100644
--- a/target/linux/brcm63xx/patches-3.8/431-MTD-physmap-allow-passing-pp_data.patch
+++ b/target/linux/brcm63xx/patches-3.8/412-MTD-physmap-allow-passing-pp_data.patch
diff --git a/target/linux/brcm63xx/patches-3.8/412-bcm63xx_enet-use-resource_size.patch b/target/linux/brcm63xx/patches-3.8/412-bcm63xx_enet-use-resource_size.patch
deleted file mode 100644
index ab59717..0000000
--- a/target/linux/brcm63xx/patches-3.8/412-bcm63xx_enet-use-resource_size.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From dbd9b51204aa4114756b8659e180139ef3878032 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Thu, 21 Jan 2010 17:28:36 +0100
-Subject: [PATCH 28/63] bcm63xx_enet: use resource_size().
-
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 18 ++++++++----------
- 1 files changed, 8 insertions(+), 10 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1594,7 +1594,6 @@ static int bcm_enet_probe(struct platfor
- struct resource *res_mem, *res_irq, *res_irq_rx, *res_irq_tx;
- struct mii_bus *bus;
- const char *clk_name;
-- unsigned int iomem_size;
- int i, ret;
-
- /* stop if shared driver failed, assume driver->probe will be
-@@ -1619,13 +1618,13 @@ static int bcm_enet_probe(struct platfor
- if (ret)
- goto out;
-
-- iomem_size = resource_size(res_mem);
-- if (!request_mem_region(res_mem->start, iomem_size, "bcm63xx_enet")) {
-+ if (!request_mem_region(res_mem->start, resource_size(res_mem),
-+ "bcm63xx_enet")) {
- ret = -EBUSY;
- goto out;
- }
-
-- priv->base = ioremap(res_mem->start, iomem_size);
-+ priv->base = ioremap(res_mem->start, resource_size(res_mem));
- if (priv->base == NULL) {
- ret = -ENOMEM;
- goto out_release_mem;
-@@ -1831,7 +1830,7 @@ out_unmap:
- iounmap(priv->base);
-
- out_release_mem:
-- release_mem_region(res_mem->start, iomem_size);
-+ release_mem_region(res_mem->start, resource_size(res_mem));
- out:
- free_netdev(dev);
- return ret;
-@@ -1903,19 +1902,18 @@ struct platform_driver bcm63xx_enet_driv
- static int bcm_enet_shared_probe(struct platform_device *pdev)
- {
- struct resource *res;
-- unsigned int iomem_size;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENODEV;
-
-- iomem_size = resource_size(res);
-- if (!request_mem_region(res->start, iomem_size, "bcm63xx_enet_dma"))
-+ if (!request_mem_region(res->start, resource_size(res),
-+ "bcm63xx_enet_dma"))
- return -EBUSY;
-
-- bcm_enet_shared_base = ioremap(res->start, iomem_size);
-+ bcm_enet_shared_base = ioremap(res->start, resource_size(res));
- if (!bcm_enet_shared_base) {
-- release_mem_region(res->start, iomem_size);
-+ release_mem_region(res->start, resource_size(res));
- return -ENOMEM;
- }
- return 0;
diff --git a/target/linux/brcm63xx/patches-3.8/432-BCM63XX-allow-providing-fixup-data-in-board-data.patch b/target/linux/brcm63xx/patches-3.8/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
index 06d0b1b..06d0b1b 100644
--- a/target/linux/brcm63xx/patches-3.8/432-BCM63XX-allow-providing-fixup-data-in-board-data.patch
+++ b/target/linux/brcm63xx/patches-3.8/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
diff --git a/target/linux/brcm63xx/patches-3.8/413-bcm63xx_enet-disable-clock-when-uninitializing-devic.patch b/target/linux/brcm63xx/patches-3.8/413-bcm63xx_enet-disable-clock-when-uninitializing-devic.patch
deleted file mode 100644
index 5fc0b19..0000000
--- a/target/linux/brcm63xx/patches-3.8/413-bcm63xx_enet-disable-clock-when-uninitializing-devic.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From fd15ecd10c95480be5635f8993b781fe3a1527c2 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Fri, 29 Apr 2011 16:54:50 +0200
-Subject: [PATCH 29/63] bcm63xx_enet: disable clock when uninitializing device.
-
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 2 ++
- 1 files changed, 2 insertions(+), 0 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1870,6 +1870,8 @@ static int bcm_enet_remove(struct platfo
- }
-
- /* release device resources */
-+ clk_disable(priv->mac_clk);
-+ clk_put(priv->mac_clk);
- iounmap(priv->base);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, resource_size(res));
diff --git a/target/linux/brcm63xx/patches-3.8/433-MTD-m25p80-allow-passing-pp_data.patch b/target/linux/brcm63xx/patches-3.8/414-MTD-m25p80-allow-passing-pp_data.patch
index 347fada..347fada 100644
--- a/target/linux/brcm63xx/patches-3.8/433-MTD-m25p80-allow-passing-pp_data.patch
+++ b/target/linux/brcm63xx/patches-3.8/414-MTD-m25p80-allow-passing-pp_data.patch
diff --git a/target/linux/brcm63xx/patches-3.8/434-MIPS-BCM63XX-store-the-flash-type-in-global-variable.patch b/target/linux/brcm63xx/patches-3.8/415-MIPS-BCM63XX-store-the-flash-type-in-global-variable.patch
index 7035098..70026f1 100644
--- a/target/linux/brcm63xx/patches-3.8/434-MIPS-BCM63XX-store-the-flash-type-in-global-variable.patch
+++ b/target/linux/brcm63xx/patches-3.8/415-MIPS-BCM63XX-store-the-flash-type-in-global-variable.patch
@@ -19,7 +19,7 @@ Subject: [PATCH 38/59] MIPS: BCM63XX: store the flash type in global variable
static struct mtd_partition mtd_partitions[] = {
{
.name = "cfe",
-@@ -86,20 +88,23 @@ static int __init bcm63xx_detect_flash_t
+@@ -86,26 +88,30 @@ static int __init bcm63xx_detect_flash_t
bcm63xx_spi_flash_info[0].max_speed_hz = 16666667;
if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
@@ -47,10 +47,6 @@ Subject: [PATCH 38/59] MIPS: BCM63XX: store the flash type in global variable
+ break;
case BCM6362_CPU_ID:
val = bcm_misc_readl(MISC_STRAPBUS_6362_REG);
- if (val & STRAPBUS_6362_HSSPI_CLK_FAST)
-@@ -108,9 +113,10 @@ static int __init bcm63xx_detect_flash_t
- bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
-
if (val & STRAPBUS_6362_BOOT_SEL_SERIAL)
- return BCM63XX_FLASH_TYPE_SERIAL;
+ bcm63xx_attached_flash = BCM63XX_FLASH_TYPE_SERIAL;
@@ -61,7 +57,7 @@ Subject: [PATCH 38/59] MIPS: BCM63XX: store the flash type in global variable
case BCM6368_CPU_ID:
val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
if (val & STRAPBUS_6368_SPI_CLK_FAST)
-@@ -118,25 +124,32 @@ static int __init bcm63xx_detect_flash_t
+@@ -113,25 +119,32 @@ static int __init bcm63xx_detect_flash_t
switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
case STRAPBUS_6368_BOOT_SEL_NAND:
@@ -100,7 +96,7 @@ Subject: [PATCH 38/59] MIPS: BCM63XX: store the flash type in global variable
case BCM63XX_FLASH_TYPE_PARALLEL:
/* read base address of boot chip select (0) */
val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-@@ -157,7 +170,7 @@ int __init bcm63xx_flash_register(void)
+@@ -152,7 +165,7 @@ int __init bcm63xx_flash_register(void)
return -ENODEV;
default:
pr_err("flash detection failed for BCM%x: %d\n",
diff --git a/target/linux/brcm63xx/patches-3.8/435-BCM63XX-add-a-fixup-for-ath9k-devices.patch b/target/linux/brcm63xx/patches-3.8/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch
index 8e2feb8..8e2feb8 100644
--- a/target/linux/brcm63xx/patches-3.8/435-BCM63XX-add-a-fixup-for-ath9k-devices.patch
+++ b/target/linux/brcm63xx/patches-3.8/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch
diff --git a/target/linux/brcm63xx/patches-3.8/416-bcm63xx_enet-reset-port-link-state-in-bcm_enetsw_ope.patch b/target/linux/brcm63xx/patches-3.8/416-bcm63xx_enet-reset-port-link-state-in-bcm_enetsw_ope.patch
deleted file mode 100644
index 6d8e5a7..0000000
--- a/target/linux/brcm63xx/patches-3.8/416-bcm63xx_enet-reset-port-link-state-in-bcm_enetsw_ope.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 6d5c5bb13db3fd8e3dd0b82742b3957f41a4a3ac Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 24 May 2012 20:38:58 +0200
-Subject: [PATCH] bcm63xx_enet: reset port link state in bcm_enetsw_open
-
-bcm_enetsw_open disables all ports, but does not reset their link state.
-This results in connected ports staying disabled after a ifdown/ifup
-cycle, since bcm_enetsw_phy_poll only enables them if their current state
-is different from the stored link state.
-
-Fix this by also resetting the port link state.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2213,6 +2213,8 @@ static int bcm_enetsw_open(struct net_de
- enetsw_writeb(priv, ENETSW_PTCTRL_RXDIS_MASK |
- ENETSW_PTCTRL_TXDIS_MASK,
- ENETSW_PTCTRL_REG(i));
-+
-+ priv->sw_port_link[i] = 0;
- }
-
- /* reset mib */
diff --git a/target/linux/brcm63xx/patches-3.8/436-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch b/target/linux/brcm63xx/patches-3.8/417-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch
index 3b34eec..d33f899 100644
--- a/target/linux/brcm63xx/patches-3.8/436-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch
+++ b/target/linux/brcm63xx/patches-3.8/417-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch
@@ -7,7 +7,7 @@ contained in flash.
--- a/drivers/mtd/bcm63xxpart.c
+++ b/drivers/mtd/bcm63xxpart.c
-@@ -76,10 +76,12 @@ static int bcm63xx_parse_cfe_partitions(
+@@ -77,10 +77,12 @@ static int bcm63xx_parse_cfe_partitions(
struct mtd_partition *parts;
int ret;
size_t retlen;
@@ -21,9 +21,9 @@ contained in flash.
int i;
u32 computed_crc;
bool rootfs_first = false;
-@@ -93,6 +95,24 @@ static int bcm63xx_parse_cfe_partitions(
+@@ -94,6 +96,24 @@ static int bcm63xx_parse_cfe_partitions(
cfelen = cfe_erasesize;
- nvramlen = bcm63xx_nvram_get_psi_size() * 1024;
+ nvramlen = bcm63xx_nvram_get_psi_size();
nvramlen = roundup(nvramlen, cfe_erasesize);
+ nvramaddr = master->size - nvramlen;
+
@@ -46,7 +46,7 @@ contained in flash.
/* Allocate memory for buffer */
buf = vmalloc(sizeof(struct bcm_tag));
-@@ -144,7 +164,7 @@ static int bcm63xx_parse_cfe_partitions(
+@@ -145,7 +165,7 @@ static int bcm63xx_parse_cfe_partitions(
rootfsaddr = 0;
spareaddr = cfelen;
}
@@ -55,7 +55,7 @@ contained in flash.
/* Determine number of partitions */
if (rootfslen > 0)
-@@ -153,6 +173,12 @@ static int bcm63xx_parse_cfe_partitions(
+@@ -154,6 +174,12 @@ static int bcm63xx_parse_cfe_partitions(
if (kernellen > 0)
nrparts++;
@@ -68,7 +68,7 @@ contained in flash.
/* Ask kernel for more memory */
parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
if (!parts) {
-@@ -190,15 +216,32 @@ static int bcm63xx_parse_cfe_partitions(
+@@ -191,15 +217,32 @@ static int bcm63xx_parse_cfe_partitions(
curpart++;
}
diff --git a/target/linux/brcm63xx/patches-3.8/417-bcm63xx_enet-don-t-overwrite-settings-when-setting-d.patch b/target/linux/brcm63xx/patches-3.8/417-bcm63xx_enet-don-t-overwrite-settings-when-setting-d.patch
deleted file mode 100644
index 407c816..0000000
--- a/target/linux/brcm63xx/patches-3.8/417-bcm63xx_enet-don-t-overwrite-settings-when-setting-d.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From e79bc74f76361020d820ed4611d28f70ebd845ca Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 10 Jul 2012 10:44:09 +0200
-Subject: [PATCH 34/84] bcm63xx_enet: don't overwrite settings when setting duplex on force
-
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2333,7 +2333,7 @@ static int bcm_enetsw_open(struct net_de
- }
-
- if (port->force_duplex_full)
-- override = ENETSW_IMPOV_FDX_MASK;
-+ override |= ENETSW_IMPOV_FDX_MASK;
-
-
- enetsw_writeb(priv, override, ENETSW_PORTOV_REG(i));
diff --git a/target/linux/brcm63xx/patches-3.8/437-MIPS-BCM63XX-pass-caldata-info-to-flash.patch b/target/linux/brcm63xx/patches-3.8/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch
index fb3b4f0..590ce83 100644
--- a/target/linux/brcm63xx/patches-3.8/437-MIPS-BCM63XX-pass-caldata-info-to-flash.patch
+++ b/target/linux/brcm63xx/patches-3.8/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch
@@ -46,7 +46,7 @@ Subject: [PATCH 69/80] MIPS: BCM63XX: pass caldata info to flash
};
static struct spi_board_info bcm63xx_spi_flash_info[] = {
-@@ -142,10 +146,13 @@ static int __init bcm63xx_detect_flash_t
+@@ -137,10 +141,13 @@ static int __init bcm63xx_detect_flash_t
return 0;
}
diff --git a/target/linux/brcm63xx/patches-3.8/418-bcm63xx_enet-store-the-number-of-ports-instead-of-ha.patch b/target/linux/brcm63xx/patches-3.8/418-bcm63xx_enet-store-the-number-of-ports-instead-of-ha.patch
deleted file mode 100644
index 0e1ed2f..0000000
--- a/target/linux/brcm63xx/patches-3.8/418-bcm63xx_enet-store-the-number-of-ports-instead-of-ha.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From efe31ec8fca92162fc21630611971345014a81a0 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 10 Jul 2012 10:39:30 +0200
-Subject: [PATCH 33/84] bcm63xx_enet: store the number of ports instead of hardcoding them
-
-This will be needed for devices with a different number of ports
----
- arch/mips/bcm63xx/dev-enet.c | 2 ++
- .../include/asm/mach-bcm63xx/bcm63xx_dev_enet.h | 2 ++
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 9 +++++----
- drivers/net/ethernet/broadcom/bcm63xx_enet.h | 1 +
- 4 files changed, 10 insertions(+), 4 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -239,6 +239,8 @@ bcm63xx_enetsw_register(const struct bcm
-
- memcpy(bcm63xx_enetsw_device.dev.platform_data, pd, sizeof (*pd));
-
-+ enetsw_pd.num_ports = ENETSW_PORTS_6368;
-+
- ret = platform_device_register(&bcm63xx_enetsw_device);
- if (ret)
- return ret;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-@@ -43,6 +43,7 @@ struct bcm63xx_enet_platform_data {
- * on board ethernet switch platform data
- */
- #define ENETSW_MAX_PORT 6
-+#define ENETSW_PORTS_6368 6 /* 4 FE PHY + 2 RGMII */
-
- struct bcm63xx_enetsw_port {
- int used;
-@@ -58,6 +59,7 @@ struct bcm63xx_enetsw_port {
-
- struct bcm63xx_enetsw_platform_data {
- char mac_addr[ETH_ALEN];
-+ int num_ports;
- struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
- };
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2041,7 +2041,7 @@ static void swphy_poll_timer(unsigned lo
- struct bcm_enet_priv *priv = (struct bcm_enet_priv *)data;
- unsigned int i;
-
-- for (i = 0; i < ARRAY_SIZE(priv->used_ports); i++) {
-+ for (i = 0; i < priv->num_ports; i++) {
- struct bcm63xx_enetsw_port *port;
- int val, j, up, advertise, lpa, lpa2, speed, duplex, media;
- u8 override;
-@@ -2207,7 +2207,7 @@ static int bcm_enetsw_open(struct net_de
- priv->rx_curr_desc = 0;
-
- /* disable all ports */
-- for (i = 0; i < 6; i++) {
-+ for (i = 0; i < priv->num_ports; i++) {
- enetsw_writeb(priv, ENETSW_PORTOV_ENABLE_MASK,
- ENETSW_PORTOV_REG(i));
- enetsw_writeb(priv, ENETSW_PTCTRL_RXDIS_MASK |
-@@ -2303,7 +2303,7 @@ static int bcm_enetsw_open(struct net_de
- /*
- * apply override config for bypass_link ports here.
- */
-- for (i = 0; i < ARRAY_SIZE(priv->used_ports); i++) {
-+ for (i = 0; i < priv->num_ports; i++) {
- struct bcm63xx_enetsw_port *port;
- u8 override;
- port = &priv->used_ports[i];
-@@ -2447,7 +2447,7 @@ static int bcm_enetsw_phy_is_external(st
- {
- int i;
-
-- for (i = 0; i < (int)ARRAY_SIZE(priv->used_ports); ++i) {
-+ for (i = 0; i < priv->num_ports; ++i) {
- if (!priv->used_ports[i].used)
- continue;
- if (priv->used_ports[i].phy_id == phy_id)
-@@ -2735,6 +2735,7 @@ static int bcm_enetsw_probe(struct platf
- memcpy(dev->dev_addr, pd->mac_addr, ETH_ALEN);
- memcpy(priv->used_ports, pd->used_ports,
- sizeof (pd->used_ports));
-+ priv->num_ports = pd->num_ports;
- }
-
- ret = compute_hw_mtu(priv, dev->mtu);
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -326,6 +326,7 @@ struct bcm_enet_priv {
- unsigned int hw_mtu;
-
- /* port mapping for switch devices */
-+ int num_ports;
- struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
- int sw_port_link[ENETSW_MAX_PORT];
-
diff --git a/target/linux/brcm63xx/patches-3.8/443-MIPS-BCM63XX-enable-enet-for-BCM6345.patch b/target/linux/brcm63xx/patches-3.8/419-MIPS-BCM63XX-enable-enet-for-BCM6345.patch
index 0ba5bb6..61b4d59 100644
--- a/target/linux/brcm63xx/patches-3.8/443-MIPS-BCM63XX-enable-enet-for-BCM6345.patch
+++ b/target/linux/brcm63xx/patches-3.8/419-MIPS-BCM63XX-enable-enet-for-BCM6345.patch
@@ -110,8 +110,8 @@ Subject: [PATCH 69/72] 443-MIPS-BCM63XX-enable-enet-for-BCM6345.patch
ret = platform_device_register(pdev);
if (ret)
return ret;
-@@ -248,6 +303,10 @@ bcm63xx_enetsw_register(const struct bcm
- else if (BCMCPU_IS_6368())
+@@ -246,6 +301,10 @@ bcm63xx_enetsw_register(const struct bcm
+ else if (BCMCPU_IS_6362() || BCMCPU_IS_6368())
enetsw_pd.num_ports = ENETSW_PORTS_6368;
+ enetsw_pd.dma_chan_width = ENETDMA_CHAN_WIDTH;
@@ -173,7 +173,7 @@ Subject: [PATCH 69/72] 443-MIPS-BCM63XX-enable-enet-for-BCM6345.patch
};
/*
-@@ -64,6 +81,15 @@ struct bcm63xx_enetsw_platform_data {
+@@ -63,6 +80,15 @@ struct bcm63xx_enetsw_platform_data {
char mac_addr[ETH_ALEN];
int num_ports;
struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
@@ -189,9 +189,9 @@ Subject: [PATCH 69/72] 443-MIPS-BCM63XX-enable-enet-for-BCM6345.patch
};
int __init bcm63xx_enet_register(int unit,
-@@ -72,4 +98,66 @@ int __init bcm63xx_enet_register(int uni
- int __init
- bcm63xx_enetsw_register(const struct bcm63xx_enetsw_platform_data *pd);
+@@ -70,4 +96,66 @@ int __init bcm63xx_enet_register(int uni
+
+ int bcm63xx_enetsw_register(const struct bcm63xx_enetsw_platform_data *pd);
+enum bcm63xx_regs_enetdmac {
+ ENETDMAC_CHANCFG,
@@ -671,7 +671,7 @@ Subject: [PATCH 69/72] 443-MIPS-BCM63XX-enable-enet-for-BCM6345.patch
/* make sure no mib update is scheduled */
cancel_work_sync(&priv->mib_update_task);
-@@ -1757,6 +1788,11 @@ static int bcm_enet_probe(struct platfor
+@@ -1752,6 +1783,11 @@ static int bcm_enet_probe(struct platfor
priv->pause_tx = pd->pause_tx;
priv->force_duplex_full = pd->force_duplex_full;
priv->force_speed_100 = pd->force_speed_100;
@@ -683,7 +683,7 @@ Subject: [PATCH 69/72] 443-MIPS-BCM63XX-enable-enet-for-BCM6345.patch
}
if (priv->mac_id == 0 && priv->has_phy && !priv->use_external_mii) {
-@@ -2144,8 +2180,8 @@ static int bcm_enetsw_open(struct net_de
+@@ -2123,8 +2159,8 @@ static int bcm_enetsw_open(struct net_de
kdev = &priv->pdev->dev;
/* mask all interrupts and request them */
@@ -694,7 +694,7 @@ Subject: [PATCH 69/72] 443-MIPS-BCM63XX-enable-enet-for-BCM6345.patch
ret = request_irq(priv->irq_rx, bcm_enet_isr_dma,
IRQF_DISABLED, dev->name, dev);
-@@ -2269,23 +2305,23 @@ static int bcm_enetsw_open(struct net_de
+@@ -2248,23 +2284,23 @@ static int bcm_enetsw_open(struct net_de
/* write rx & tx ring addresses */
enet_dmas_writel(priv, priv->rx_desc_dma,
@@ -728,7 +728,7 @@ Subject: [PATCH 69/72] 443-MIPS-BCM63XX-enable-enet-for-BCM6345.patch
/* set flow control low/high threshold to 1/3 / 2/3 */
val = priv->rx_ring_size / 3;
-@@ -2298,21 +2334,21 @@ static int bcm_enetsw_open(struct net_de
+@@ -2277,21 +2313,21 @@ static int bcm_enetsw_open(struct net_de
wmb();
enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
enet_dmac_writel(priv, ENETDMAC_CHANCFG_EN_MASK,
@@ -755,7 +755,7 @@ Subject: [PATCH 69/72] 443-MIPS-BCM63XX-enable-enet-for-BCM6345.patch
netif_carrier_on(dev);
netif_start_queue(dev);
-@@ -2419,8 +2455,8 @@ static int bcm_enetsw_stop(struct net_de
+@@ -2397,8 +2433,8 @@ static int bcm_enetsw_stop(struct net_de
del_timer_sync(&priv->rx_timeout);
/* mask all interrupts */
@@ -766,7 +766,7 @@ Subject: [PATCH 69/72] 443-MIPS-BCM63XX-enable-enet-for-BCM6345.patch
/* disable dma & mac */
bcm_enet_disable_dma(priv, priv->tx_chan);
-@@ -2757,6 +2793,9 @@ static int bcm_enetsw_probe(struct platf
+@@ -2736,6 +2772,9 @@ static int bcm_enetsw_probe(struct platf
memcpy(priv->used_ports, pd->used_ports,
sizeof (pd->used_ports));
priv->num_ports = pd->num_ports;
diff --git a/target/linux/brcm63xx/patches-3.8/419-bcm63xx_enet-store-is_sw-in-a-variable-instead-of-ch.patch b/target/linux/brcm63xx/patches-3.8/419-bcm63xx_enet-store-is_sw-in-a-variable-instead-of-ch.patch
deleted file mode 100644
index 9f3cbfd..0000000
--- a/target/linux/brcm63xx/patches-3.8/419-bcm63xx_enet-store-is_sw-in-a-variable-instead-of-ch.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From ef581388c45dbc48f7bbe050e87deb1e3c63a698 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 10 Jul 2012 10:52:02 +0200
-Subject: [PATCH 35/84] bcm63xx_enet: store is_sw in a variable instead of checking the cpuid
-
-Reduces the number of changes needed for making enetsw work on new
-chips.
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 7 +++++--
- drivers/net/ethernet/broadcom/bcm63xx_enet.h | 10 ++--------
- 2 files changed, 7 insertions(+), 10 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -364,7 +364,7 @@ static int bcm_enet_receive_queue(struct
- }
-
- /* recycle packet if it's marked as bad */
-- if (!bcm_enet_is_sw(priv) &&
-+ if (!priv->enet_is_sw &&
- unlikely(len_stat & DMADESC_ERR_MASK)) {
- dev->stats.rx_errors++;
-
-@@ -597,7 +597,7 @@ static int bcm_enet_start_xmit(struct sk
- }
-
- /* pad small packets sent on a switch device */
-- if (bcm_enet_is_sw(priv) && skb->len < 64) {
-+ if (priv->enet_is_sw && skb->len < 64) {
- int needed = 64 - skb->len;
- char *data;
-
-@@ -1700,6 +1700,8 @@ static int bcm_enet_probe(struct platfor
- return -ENOMEM;
- priv = netdev_priv(dev);
-
-+ priv->enet_is_sw = false;
-+
- ret = compute_hw_mtu(priv, dev->mtu);
- if (ret)
- goto out;
-@@ -2725,6 +2727,7 @@ static int bcm_enetsw_probe(struct platf
- memset(priv, 0, sizeof(*priv));
-
- /* initialize default and fetch platform data */
-+ priv->enet_is_sw = true;
- priv->irq_rx = irq_rx;
- priv->irq_tx = irq_tx;
- priv->rx_ring_size = BCMENET_DEF_RX_DESC;
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -325,6 +325,8 @@ struct bcm_enet_priv {
- /* maximum hardware transmit/receive size */
- unsigned int hw_mtu;
-
-+ bool enet_is_sw;
-+
- /* port mapping for switch devices */
- int num_ports;
- struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
-@@ -335,12 +337,4 @@ struct bcm_enet_priv {
- spinlock_t enetsw_mdio_lock;
- };
-
--static inline int bcm_enet_is_sw(struct bcm_enet_priv *priv)
--{
-- if (BCMCPU_IS_6368())
-- return 1;
-- else
-- return 0;
--}
--
- #endif /* ! BCM63XX_ENET_H_ */
diff --git a/target/linux/brcm63xx/patches-3.8/444-BCM63XX-add-endian-check-for-ath9k.patch b/target/linux/brcm63xx/patches-3.8/420-BCM63XX-add-endian-check-for-ath9k.patch
index bdcb3e0..bdcb3e0 100644
--- a/target/linux/brcm63xx/patches-3.8/444-BCM63XX-add-endian-check-for-ath9k.patch
+++ b/target/linux/brcm63xx/patches-3.8/420-BCM63XX-add-endian-check-for-ath9k.patch
diff --git a/target/linux/brcm63xx/patches-3.8/420-BCM63XX-allow-enetsw-without-tx-irq.patch b/target/linux/brcm63xx/patches-3.8/420-BCM63XX-allow-enetsw-without-tx-irq.patch
deleted file mode 100644
index b17af98..0000000
--- a/target/linux/brcm63xx/patches-3.8/420-BCM63XX-allow-enetsw-without-tx-irq.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From 625894c377ba266c0044675b53f05d65db6355b6 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 8 Jul 2012 13:07:52 +0200
-Subject: [PATCH 38/84] BCM63XX: allow enetsw without tx irq
-
----
- arch/mips/bcm63xx/dev-enet.c | 2 ++
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 18 +++++++++++-------
- 2 files changed, 13 insertions(+), 7 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -236,6 +236,8 @@ bcm63xx_enetsw_register(const struct bcm
- enetsw_res[0].end += RSET_ENETSW_SIZE - 1;
- enetsw_res[1].start = bcm63xx_get_irq_number(IRQ_ENETSW_RXDMA0);
- enetsw_res[2].start = bcm63xx_get_irq_number(IRQ_ENETSW_TXDMA0);
-+ if (!enetsw_res[2].start)
-+ enetsw_res[2].start = -1;
-
- memcpy(bcm63xx_enetsw_device.dev.platform_data, pd, sizeof (*pd));
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2151,10 +2151,12 @@ static int bcm_enetsw_open(struct net_de
- if (ret)
- goto out_freeirq;
-
-- ret = request_irq(priv->irq_tx, bcm_enet_isr_dma,
-- IRQF_DISABLED, dev->name, dev);
-- if (ret)
-- goto out_freeirq_rx;
-+ if (priv->irq_tx != -1) {
-+ ret = request_irq(priv->irq_tx, bcm_enet_isr_dma,
-+ IRQF_DISABLED, dev->name, dev);
-+ if (ret)
-+ goto out_freeirq_rx;
-+ }
-
- /* allocate rx dma ring */
- size = priv->rx_ring_size * sizeof(struct bcm_enet_desc);
-@@ -2376,7 +2378,8 @@ out_free_rx_ring:
- priv->rx_desc_cpu, priv->rx_desc_dma);
-
- out_freeirq_tx:
-- free_irq(priv->irq_tx, dev);
-+ if (priv->irq_tx != -1)
-+ free_irq(priv->irq_tx, dev);
-
- out_freeirq_rx:
- free_irq(priv->irq_rx, dev);
-@@ -2433,7 +2436,8 @@ static int bcm_enetsw_stop(struct net_de
- priv->rx_desc_cpu, priv->rx_desc_dma);
- dma_free_coherent(kdev, priv->tx_desc_alloc_size,
- priv->tx_desc_cpu, priv->tx_desc_dma);
-- free_irq(priv->irq_tx, dev);
-+ if (priv->irq_tx != -1)
-+ free_irq(priv->irq_tx, dev);
- free_irq(priv->irq_rx, dev);
-
- return 0;
-@@ -2716,7 +2720,7 @@ static int bcm_enetsw_probe(struct platf
- res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- irq_rx = platform_get_irq(pdev, 0);
- irq_tx = platform_get_irq(pdev, 1);
-- if (!res_mem || irq_rx < 0 || irq_tx < 0)
-+ if (!res_mem || irq_rx < 0)
- return -ENODEV;
-
- ret = 0;
diff --git a/target/linux/brcm63xx/patches-3.8/445-BCM63XX-add-led-pin-for-ath9k.patch b/target/linux/brcm63xx/patches-3.8/421-BCM63XX-add-led-pin-for-ath9k.patch
index 4f77179..4f77179 100644
--- a/target/linux/brcm63xx/patches-3.8/445-BCM63XX-add-led-pin-for-ath9k.patch
+++ b/target/linux/brcm63xx/patches-3.8/421-BCM63XX-add-led-pin-for-ath9k.patch
diff --git a/target/linux/brcm63xx/patches-3.8/421-BCM63XX-use-port-id-for-deciding-external-phy.patch b/target/linux/brcm63xx/patches-3.8/421-BCM63XX-use-port-id-for-deciding-external-phy.patch
deleted file mode 100644
index c047501..0000000
--- a/target/linux/brcm63xx/patches-3.8/421-BCM63XX-use-port-id-for-deciding-external-phy.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From 85e4551e033df7cb043e93042661fc1e58799efa Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 8 Jul 2012 15:36:23 +0200
-Subject: [PATCH 52/84] BCM63XX: use port id for deciding external phy
-
-Ports 0-3 always use the internal phy, while 4+ always need an external
-phy to work.
----
- .../include/asm/mach-bcm63xx/bcm63xx_dev_enet.h | 3 ++-
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 15 ++++++++-------
- drivers/net/ethernet/broadcom/bcm63xx_enet.h | 5 +++++
- 3 files changed, 15 insertions(+), 8 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-@@ -45,9 +45,10 @@ struct bcm63xx_enet_platform_data {
- #define ENETSW_MAX_PORT 6
- #define ENETSW_PORTS_6368 6 /* 4 FE PHY + 2 RGMII */
-
-+#define ENETSW_RGMII_PORT0 4
-+
- struct bcm63xx_enetsw_port {
- int used;
-- int external_phy;
- int phy_id;
-
- int bypass_link;
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2046,6 +2046,7 @@ static void swphy_poll_timer(unsigned lo
- for (i = 0; i < priv->num_ports; i++) {
- struct bcm63xx_enetsw_port *port;
- int val, j, up, advertise, lpa, lpa2, speed, duplex, media;
-+ int external_phy = bcm_enet_port_is_rgmii(i);
- u8 override;
-
- port = &priv->used_ports[i];
-@@ -2057,7 +2058,7 @@ static void swphy_poll_timer(unsigned lo
-
- /* dummy read to clear */
- for (j = 0; j < 2; j++)
-- val = bcmenet_sw_mdio_read(priv, port->external_phy,
-+ val = bcmenet_sw_mdio_read(priv, external_phy,
- port->phy_id, MII_BMSR);
-
- if (val == 0xffff)
-@@ -2081,14 +2082,14 @@ static void swphy_poll_timer(unsigned lo
- continue;
- }
-
-- advertise = bcmenet_sw_mdio_read(priv, port->external_phy,
-+ advertise = bcmenet_sw_mdio_read(priv, external_phy,
- port->phy_id, MII_ADVERTISE);
-
-- lpa = bcmenet_sw_mdio_read(priv, port->external_phy,
-- port->phy_id, MII_LPA);
-+ lpa = bcmenet_sw_mdio_read(priv, external_phy, port->phy_id,
-+ MII_LPA);
-
-- lpa2 = bcmenet_sw_mdio_read(priv, port->external_phy,
-- port->phy_id, MII_STAT1000);
-+ lpa2 = bcmenet_sw_mdio_read(priv, external_phy, port->phy_id,
-+ MII_STAT1000);
-
- /* figure out media and duplex from advertise and LPA values */
- media = mii_nway_result(lpa & advertise);
-@@ -2457,7 +2458,7 @@ static int bcm_enetsw_phy_is_external(st
- if (!priv->used_ports[i].used)
- continue;
- if (priv->used_ports[i].phy_id == phy_id)
-- return priv->used_ports[i].external_phy;
-+ return bcm_enet_port_is_rgmii(i);
- }
-
- printk_once(KERN_WARNING "bcm63xx_enet: could not find a used port "
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -337,4 +337,9 @@ struct bcm_enet_priv {
- spinlock_t enetsw_mdio_lock;
- };
-
-+static inline int bcm_enet_port_is_rgmii(int portid)
-+{
-+ return portid >= ENETSW_RGMII_PORT0;
-+}
-+
- #endif /* ! BCM63XX_ENET_H_ */
diff --git a/target/linux/brcm63xx/patches-3.8/446-BCM63XX-add-a-fixup-for-rt2x00-devices.patch b/target/linux/brcm63xx/patches-3.8/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
index 039e988..69d9223 100644
--- a/target/linux/brcm63xx/patches-3.8/446-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
+++ b/target/linux/brcm63xx/patches-3.8/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
@@ -61,7 +61,7 @@ Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
}
--- a/arch/mips/bcm63xx/dev-flash.c
+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -146,7 +146,7 @@ static int __init bcm63xx_detect_flash_t
+@@ -141,7 +141,7 @@ static int __init bcm63xx_detect_flash_t
return 0;
}
diff --git a/target/linux/brcm63xx/patches-3.8/423-bcm63xx_enet-fix-lockup-on-BCM6328.patch b/target/linux/brcm63xx/patches-3.8/423-bcm63xx_enet-fix-lockup-on-BCM6328.patch
deleted file mode 100644
index 1611d57..0000000
--- a/target/linux/brcm63xx/patches-3.8/423-bcm63xx_enet-fix-lockup-on-BCM6328.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 382a0b0dc4cbd0e0fbfd6c2d132e972c3d1245b0 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 13 Nov 2011 14:59:37 +0100
-Subject: [PATCH 39/84] bcm63xx_enet: fix lockup on BCM6328
-
-BCM6328 locks up on a maxburst size of 16, reduce it to 8 for BCM6328 and
-BCM6368.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 13 +++++++------
- drivers/net/ethernet/broadcom/bcm63xx_enet.h | 4 ++++
- 2 files changed, 11 insertions(+), 6 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -261,7 +261,6 @@ static int bcm_enet_refill_rx(struct net
- if (!skb)
- break;
- priv->rx_skb[desc_idx] = skb;
--
- p = dma_map_single(&priv->pdev->dev, skb->data,
- priv->rx_skb_size,
- DMA_FROM_DEVICE);
-@@ -995,9 +994,9 @@ static int bcm_enet_open(struct net_devi
- enet_writel(priv, priv->hw_mtu, ENET_TXMAXLEN_REG);
-
- /* set dma maximum burst len */
-- enet_dmac_writel(priv, BCMENET_DMA_MAXBURST,
-+ enet_dmac_writel(priv, priv->dma_maxburst,
- ENETDMAC_MAXBURST_REG(priv->rx_chan));
-- enet_dmac_writel(priv, BCMENET_DMA_MAXBURST,
-+ enet_dmac_writel(priv, priv->dma_maxburst,
- ENETDMAC_MAXBURST_REG(priv->tx_chan));
-
- /* set correct transmit fifo watermark */
-@@ -1593,7 +1592,7 @@ static int compute_hw_mtu(struct bcm_ene
- * it's appended
- */
- priv->rx_skb_size = ALIGN(actual_mtu + ETH_FCS_LEN,
-- BCMENET_DMA_MAXBURST * 4);
-+ priv->dma_maxburst * 4);
- return 0;
- }
-
-@@ -1701,6 +1700,7 @@ static int bcm_enet_probe(struct platfor
- priv = netdev_priv(dev);
-
- priv->enet_is_sw = false;
-+ priv->dma_maxburst = BCMENET_DMA_MAXBURST;
-
- ret = compute_hw_mtu(priv, dev->mtu);
- if (ret)
-@@ -2282,9 +2282,9 @@ static int bcm_enetsw_open(struct net_de
- enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG(priv->tx_chan));
-
- /* set dma maximum burst len */
-- enet_dmac_writel(priv, BCMENET_DMA_MAXBURST,
-+ enet_dmac_writel(priv, priv->dma_maxburst,
- ENETDMAC_MAXBURST_REG(priv->rx_chan));
-- enet_dmac_writel(priv, BCMENET_DMA_MAXBURST,
-+ enet_dmac_writel(priv, priv->dma_maxburst,
- ENETDMAC_MAXBURST_REG(priv->tx_chan));
-
- /* set flow control low/high threshold to 1/3 / 2/3 */
-@@ -2749,6 +2749,7 @@ static int bcm_enetsw_probe(struct platf
- priv->irq_tx = irq_tx;
- priv->rx_ring_size = BCMENET_DEF_RX_DESC;
- priv->tx_ring_size = BCMENET_DEF_TX_DESC;
-+ priv->dma_maxburst = BCMENETSW_DMA_MAXBURST;
-
- pd = pdev->dev.platform_data;
- if (pd) {
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -18,6 +18,7 @@
-
- /* maximum burst len for dma (4 bytes unit) */
- #define BCMENET_DMA_MAXBURST 16
-+#define BCMENETSW_DMA_MAXBURST 8
-
- /* tx transmit threshold (4 bytes unit), fifo is 256 bytes, the value
- * must be low enough so that a DMA transfer of above burst length can
-@@ -252,6 +253,9 @@ struct bcm_enet_priv {
- /* number of dma desc in tx ring */
- int tx_ring_size;
-
-+ /* maximum dma burst size */
-+ int dma_maxburst;
-+
- /* cpu view of rx dma ring */
- struct bcm_enet_desc *tx_desc_cpu;
-
diff --git a/target/linux/brcm63xx/patches-3.8/447-bcm63xx_enet_add_b53_support.patch b/target/linux/brcm63xx/patches-3.8/423-bcm63xx_enet_add_b53_support.patch
index 85d6794..cdb7fdc 100644
--- a/target/linux/brcm63xx/patches-3.8/447-bcm63xx_enet_add_b53_support.patch
+++ b/target/linux/brcm63xx/patches-3.8/423-bcm63xx_enet_add_b53_support.patch
@@ -20,7 +20,7 @@
#include <bcm63xx_dev_enet.h>
#include "bcm63xx_enet.h"
-@@ -2013,7 +2014,8 @@ static int bcm_enet_remove(struct platfo
+@@ -1992,7 +1993,8 @@ static int bcm_enet_remove(struct platfo
return 0;
}
@@ -30,7 +30,7 @@
.probe = bcm_enet_probe,
.remove = bcm_enet_remove,
.driver = {
-@@ -2022,6 +2024,42 @@ struct platform_driver bcm63xx_enet_driv
+@@ -2001,6 +2003,42 @@ struct platform_driver bcm63xx_enet_driv
},
};
@@ -73,7 +73,7 @@
/*
* switch mii access callbacks
*/
-@@ -2270,29 +2308,6 @@ static int bcm_enetsw_open(struct net_de
+@@ -2249,29 +2287,6 @@ static int bcm_enetsw_open(struct net_de
enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
}
@@ -103,7 +103,7 @@
/* initialize flow control buffer allocation */
enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
ENETDMA_BUFALLOC_REG(priv->rx_chan));
-@@ -2760,6 +2775,9 @@ static int bcm_enetsw_probe(struct platf
+@@ -2739,6 +2754,9 @@ static int bcm_enetsw_probe(struct platf
struct bcm63xx_enetsw_platform_data *pd;
struct resource *res_mem;
int ret, irq_rx, irq_tx;
@@ -113,7 +113,7 @@
/* stop if shared driver failed, assume driver->probe will be
* called in the same order we register devices (correct ?) */
-@@ -2847,6 +2865,43 @@ static int bcm_enetsw_probe(struct platf
+@@ -2826,6 +2844,43 @@ static int bcm_enetsw_probe(struct platf
priv->pdev = pdev;
priv->net_dev = dev;
@@ -157,7 +157,7 @@
return 0;
out_put_clk:
-@@ -2877,6 +2932,9 @@ static int bcm_enetsw_remove(struct plat
+@@ -2856,6 +2911,9 @@ static int bcm_enetsw_remove(struct plat
priv = netdev_priv(dev);
unregister_netdev(dev);
diff --git a/target/linux/brcm63xx/patches-3.8/424-MIPS-BCM63XX-add-support-for-BCM6328-in-bcm_enetsw.patch b/target/linux/brcm63xx/patches-3.8/424-MIPS-BCM63XX-add-support-for-BCM6328-in-bcm_enetsw.patch
deleted file mode 100644
index 641175e..0000000
--- a/target/linux/brcm63xx/patches-3.8/424-MIPS-BCM63XX-add-support-for-BCM6328-in-bcm_enetsw.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From a1bd0479a1ddac4f21afd4ebfe8f667b9fa5eff2 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 14 Jun 2011 21:14:39 +0200
-Subject: [PATCH 50/72] MIPS: BCM63XX: add support for BCM6328 in bcm_enetsw
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/clk.c | 15 +++++++++++----
- arch/mips/bcm63xx/dev-enet.c | 9 ++++++---
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h | 1 +
- 3 files changed, 18 insertions(+), 7 deletions(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -119,11 +119,18 @@ static struct clk clk_ephy = {
- */
- static void enetsw_set(struct clk *clk, int enable)
- {
-- if (!BCMCPU_IS_6368())
-+ u32 mask;
-+
-+ if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
- return;
-- bcm_hwclock_set(CKCTL_6368_ROBOSW_EN |
-- CKCTL_6368_SWPKT_USB_EN |
-- CKCTL_6368_SWPKT_SAR_EN, enable);
-+
-+ if (BCMCPU_IS_6328())
-+ mask = CKCTL_6328_ROBOSW_EN;
-+ else
-+ mask = CKCTL_6368_ROBOSW_EN | CKCTL_6368_SWPKT_USB_EN |
-+ CKCTL_6368_SWPKT_SAR_EN;
-+
-+ bcm_hwclock_set(mask, enable);
- if (enable) {
- /* reset switch core afer clock change */
- bcm63xx_core_set_reset(BCM63XX_RESET_ENETSW, 1);
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -141,7 +141,7 @@ static int __init register_shared(void)
- shared_res[0].end = shared_res[0].start;
- shared_res[0].end += (RSET_ENETDMA_SIZE) - 1;
-
-- if (BCMCPU_IS_6368())
-+ if (BCMCPU_IS_6328() || BCMCPU_IS_6368())
- chan_count = 32;
- else
- chan_count = 16;
-@@ -224,7 +224,7 @@ bcm63xx_enetsw_register(const struct bcm
- {
- int ret;
-
-- if (!BCMCPU_IS_6368())
-+ if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
- return -ENODEV;
-
- ret = register_shared();
-@@ -241,7 +241,10 @@ bcm63xx_enetsw_register(const struct bcm
-
- memcpy(bcm63xx_enetsw_device.dev.platform_data, pd, sizeof (*pd));
-
-- enetsw_pd.num_ports = ENETSW_PORTS_6368;
-+ if (BCMCPU_IS_6328())
-+ enetsw_pd.num_ports = ENETSW_PORTS_6328;
-+ else if (BCMCPU_IS_6368())
-+ enetsw_pd.num_ports = ENETSW_PORTS_6368;
-
- ret = platform_device_register(&bcm63xx_enetsw_device);
- if (ret)
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-@@ -43,6 +43,7 @@ struct bcm63xx_enet_platform_data {
- * on board ethernet switch platform data
- */
- #define ENETSW_MAX_PORT 6
-+#define ENETSW_PORTS_6328 5 /* 4 FE PHY + 1 RGMII */
- #define ENETSW_PORTS_6368 6 /* 4 FE PHY + 2 RGMII */
-
- #define ENETSW_RGMII_PORT0 4
diff --git a/target/linux/brcm63xx/patches-3.8/428-MIPS-BCM63XX-add-flash-detection-for-BCM6362.patch b/target/linux/brcm63xx/patches-3.8/428-MIPS-BCM63XX-add-flash-detection-for-BCM6362.patch
deleted file mode 100644
index 415c405..0000000
--- a/target/linux/brcm63xx/patches-3.8/428-MIPS-BCM63XX-add-flash-detection-for-BCM6362.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From d9666553a10ea85ea64e3e8784a42167a1709ed5 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Mon, 21 Nov 2011 00:48:52 +0100
-Subject: [PATCH 55/84] MIPS: BCM63XX: add flash detection for BCM6362
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/dev-flash.c | 13 ++++++++++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 1 +
- 2 files changed, 13 insertions(+), 1 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -100,6 +100,17 @@ static int __init bcm63xx_detect_flash_t
- return BCM63XX_FLASH_TYPE_PARALLEL;
- else
- return BCM63XX_FLASH_TYPE_SERIAL;
-+ case BCM6362_CPU_ID:
-+ val = bcm_misc_readl(MISC_STRAPBUS_6362_REG);
-+ if (val & STRAPBUS_6362_HSSPI_CLK_FAST)
-+ bcm63xx_spi_flash_info[0].max_speed_hz = 50000000;
-+ else
-+ bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
-+
-+ if (val & STRAPBUS_6362_BOOT_SEL_SERIAL)
-+ return BCM63XX_FLASH_TYPE_SERIAL;
-+ else
-+ return BCM63XX_FLASH_TYPE_NAND;
- case BCM6368_CPU_ID:
- val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
- if (val & STRAPBUS_6368_SPI_CLK_FAST)
-@@ -136,7 +147,7 @@ int __init bcm63xx_flash_register(void)
-
- return platform_device_register(&mtd_dev);
- case BCM63XX_FLASH_TYPE_SERIAL:
-- if (BCMCPU_IS_6328())
-+ if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
- bcm63xx_flash_data.max_transfer_len = HSSPI_BUFFER_LEN;
-
- return spi_register_board_info(bcm63xx_spi_flash_info,
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1474,6 +1474,7 @@
-
- #define MISC_STRAPBUS_6362_REG 0x14
- #define STRAPBUS_6362_FCVO_SHIFT 1
-+#define STRAPBUS_6362_HSSPI_CLK_FAST (1 << 13)
- #define STRAPBUS_6362_FCVO_MASK (0x1f << STRAPBUS_6362_FCVO_SHIFT)
- #define STRAPBUS_6362_BOOT_SEL_SERIAL (1 << 15)
- #define STRAPBUS_6362_BOOT_SEL_NAND (0 << 15)
diff --git a/target/linux/brcm63xx/patches-3.8/429-MIPS-BCM63XX-export-PSI-size-from-nvram.patch b/target/linux/brcm63xx/patches-3.8/429-MIPS-BCM63XX-export-PSI-size-from-nvram.patch
deleted file mode 100644
index 6841338..0000000
--- a/target/linux/brcm63xx/patches-3.8/429-MIPS-BCM63XX-export-PSI-size-from-nvram.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From ffbeb183bf0e9e12fd607c5352f48420c32f588f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 12 May 2012 23:04:17 +0200
-Subject: [PATCH 61/79] MIPS: BCM63XX: export PSI size from nvram
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/nvram.c | 11 +++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h | 2 ++
- 2 files changed, 13 insertions(+)
-
---- a/arch/mips/bcm63xx/nvram.c
-+++ b/arch/mips/bcm63xx/nvram.c
-@@ -35,6 +35,8 @@ struct bcm963xx_nvram {
- u32 checksum_high;
- };
-
-+#define BCM63XX_DEFAULT_PSI_SIZE 64
-+
- static struct bcm963xx_nvram nvram;
- static int mac_addr_used;
-
-@@ -104,3 +106,12 @@ int bcm63xx_nvram_get_mac_address(u8 *ma
- return 0;
- }
- EXPORT_SYMBOL(bcm63xx_nvram_get_mac_address);
-+
-+int bcm63xx_nvram_get_psi_size(void)
-+{
-+ if (nvram.psi_size > 0)
-+ return nvram.psi_size;
-+
-+ return BCM63XX_DEFAULT_PSI_SIZE;
-+}
-+EXPORT_SYMBOL(bcm63xx_nvram_get_psi_size);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h
-@@ -30,4 +30,6 @@ u8 *bcm63xx_nvram_get_name(void);
- */
- int bcm63xx_nvram_get_mac_address(u8 *mac);
-
-+int bcm63xx_nvram_get_psi_size(void);
-+
- #endif /* BCM63XX_NVRAM_H */
diff --git a/target/linux/brcm63xx/patches-3.8/430-MTD-bcm63xxpart-use-nvram-for-PSI-size.patch b/target/linux/brcm63xx/patches-3.8/430-MTD-bcm63xxpart-use-nvram-for-PSI-size.patch
deleted file mode 100644
index fd1bfc4..0000000
--- a/target/linux/brcm63xx/patches-3.8/430-MTD-bcm63xxpart-use-nvram-for-PSI-size.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 658afad639a9456e1bb6fe5bba0032f3c0c3f699 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 1 May 2012 14:10:39 +0200
-Subject: [PATCH 62/79] MTD: bcm63xxpart: use nvram for PSI size
-
----
- drivers/mtd/bcm63xxpart.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -32,6 +32,7 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-
-+#include <asm/mach-bcm63xx/bcm63xx_nvram.h>
- #include <linux/bcm963xx_tag.h>
- #include <asm/mach-bcm63xx/board_bcm963xx.h>
-
-@@ -90,7 +91,8 @@ static int bcm63xx_parse_cfe_partitions(
- BCM63XX_CFE_BLOCK_SIZE);
-
- cfelen = cfe_erasesize;
-- nvramlen = cfe_erasesize;
-+ nvramlen = bcm63xx_nvram_get_psi_size() * 1024;
-+ nvramlen = roundup(nvramlen, cfe_erasesize);
-
- /* Allocate memory for buffer */
- buf = vmalloc(sizeof(struct bcm_tag));
diff --git a/target/linux/brcm63xx/patches-3.8/439-MIPS-BCM63XX-wire-up-the-HS-SPI-controller-for-BCM63.patch b/target/linux/brcm63xx/patches-3.8/439-MIPS-BCM63XX-wire-up-the-HS-SPI-controller-for-BCM63.patch
deleted file mode 100644
index 3115f1b..0000000
--- a/target/linux/brcm63xx/patches-3.8/439-MIPS-BCM63XX-wire-up-the-HS-SPI-controller-for-BCM63.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From ed225910f0e062d9c28d5cf216f97b3cf457a8c5 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Mon, 21 Nov 2011 00:55:49 +0100
-Subject: [PATCH 58/81] MIPS: BCM63XX: wire up the HS SPI controller for BCM6362
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/clk.c | 2 ++
- arch/mips/bcm63xx/dev-hsspi.c | 7 +++++--
- .../include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h | 1 +
- 3 files changed, 8 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -232,6 +232,8 @@ static void hsspi_set(struct clk *clk, i
-
- if (BCMCPU_IS_6328())
- mask = CKCTL_6328_HSSPI_EN;
-+ else if (BCMCPU_IS_6362())
-+ mask = CKCTL_6362_HSSPI_EN;
- else
- return;
-
---- a/arch/mips/bcm63xx/dev-hsspi.c
-+++ b/arch/mips/bcm63xx/dev-hsspi.c
-@@ -43,7 +43,7 @@ static struct platform_device bcm63xx_hs
- int __init bcm63xx_hsspi_register(void)
- {
-
-- if (!BCMCPU_IS_6328())
-+ if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362())
- return -ENODEV;
-
- spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
-@@ -51,7 +51,10 @@ int __init bcm63xx_hsspi_register(void)
- spi_resources[0].end += RSET_HSSPI_SIZE - 1;
- spi_resources[1].start = bcm63xx_get_irq_number(IRQ_HSSPI);
-
-- spi_pdata.speed_hz = HSSPI_PLL_HZ_6328;
-+ if (BCMCPU_IS_6328())
-+ spi_pdata.speed_hz = HSSPI_PLL_HZ_6328;
-+ else
-+ spi_pdata.speed_hz = HSSPI_PLL_HZ;
-
- return platform_device_register(&bcm63xx_hsspi_device);
- }
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
-@@ -16,6 +16,7 @@ struct bcm63xx_hsspi_pdata {
- #define bcm_hsspi_writel(v, o) bcm_rset_writel(RSET_HSSPI, (v), (o))
-
- #define HSSPI_PLL_HZ_6328 133333333
-+#define HSSPI_PLL_HZ 400000000
-
- #define HSSPI_BUFFER_LEN 512
-
diff --git a/target/linux/brcm63xx/patches-3.8/440-MIPS-BCM63XX-enable-SPI-controller-for-BCM6362.patch b/target/linux/brcm63xx/patches-3.8/440-MIPS-BCM63XX-enable-SPI-controller-for-BCM6362.patch
deleted file mode 100644
index 2fe6da3..0000000
--- a/target/linux/brcm63xx/patches-3.8/440-MIPS-BCM63XX-enable-SPI-controller-for-BCM6362.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From eef84812bc7ffd590da6ad6b83bfeebaa43a7055 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 5 Jul 2012 21:19:20 +0200
-Subject: [PATCH 58/84] MIPS: BCM63XX: enable SPI controller for BCM6362
-
----
- arch/mips/bcm63xx/clk.c | 2 ++
- arch/mips/bcm63xx/dev-spi.c | 11 ++++++++++-
- .../include/asm/mach-bcm63xx/bcm63xx_dev_spi.h | 3 +++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 16 ++++++++++++++++
- 4 files changed, 31 insertions(+), 1 deletions(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -213,6 +213,8 @@ static void spi_set(struct clk *clk, int
- mask = CKCTL_6348_SPI_EN;
- else if (BCMCPU_IS_6358())
- mask = CKCTL_6358_SPI_EN;
-+ else if (BCMCPU_IS_6362())
-+ mask = CKCTL_6362_SPI_EN;
- else
- /* BCMCPU_IS_6368 */
- mask = CKCTL_6368_SPI_EN;
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -34,6 +34,10 @@ static const unsigned long bcm6358_regs_
- __GEN_SPI_REGS_TABLE(6358)
- };
-
-+static const unsigned long bcm6362_regs_spi[] = {
-+ __GEN_SPI_REGS_TABLE(6362)
-+};
-+
- static const unsigned long bcm6368_regs_spi[] = {
- __GEN_SPI_REGS_TABLE(6368)
- };
-@@ -49,6 +53,8 @@ static __init void bcm63xx_spi_regs_init
- bcm63xx_regs_spi = bcm6348_regs_spi;
- if (BCMCPU_IS_6358())
- bcm63xx_regs_spi = bcm6358_regs_spi;
-+ if (BCMCPU_IS_6362())
-+ bcm63xx_regs_spi = bcm6362_regs_spi;
- if (BCMCPU_IS_6368())
- bcm63xx_regs_spi = bcm6368_regs_spi;
- }
-@@ -99,6 +105,9 @@ int __init bcm63xx_spi_register(void)
- /* Set bus frequency */
- spi_pdata.speed_hz = clk_get_rate(periph_clk);
-
-+ if (BCMCPU_IS_6362())
-+ spi_pdata.bus_num = 1;
-+
- spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
- spi_resources[0].end = spi_resources[0].start;
- spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI);
-@@ -110,7 +119,7 @@ int __init bcm63xx_spi_register(void)
- spi_pdata.msg_ctl_width = SPI_6338_MSG_CTL_WIDTH;
- }
-
-- if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) {
-+ if (BCMCPU_IS_6358() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
- spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
- spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE;
- spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
-@@ -81,6 +81,9 @@ static inline unsigned long bcm63xx_spir
- #ifdef CONFIG_BCM63XX_CPU_6358
- __GEN_SPI_RSET(6358)
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+ __GEN_SPI_RSET(6362)
-+#endif
- #ifdef CONFIG_BCM63XX_CPU_6368
- __GEN_SPI_RSET(6368)
- #endif
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1393,6 +1393,22 @@
- #define SPI_6358_MSG_TAIL 0x709
- #define SPI_6358_RX_TAIL 0x70B
-
-+/* BCM 6362 SPI core */
-+#define SPI_6362_MSG_CTL 0x00 /* 16-bits register */
-+#define SPI_6362_MSG_DATA 0x02
-+#define SPI_6362_MSG_DATA_SIZE 0x21e
-+#define SPI_6362_RX_DATA 0x400
-+#define SPI_6362_RX_DATA_SIZE 0x220
-+#define SPI_6362_CMD 0x700 /* 16-bits register */
-+#define SPI_6362_INT_STATUS 0x702
-+#define SPI_6362_INT_MASK_ST 0x703
-+#define SPI_6362_INT_MASK 0x704
-+#define SPI_6362_ST 0x705
-+#define SPI_6362_CLK_CFG 0x706
-+#define SPI_6362_FILL_BYTE 0x707
-+#define SPI_6362_MSG_TAIL 0x709
-+#define SPI_6362_RX_TAIL 0x70B
-+
- /* BCM 6358 SPI core */
- #define SPI_6368_MSG_CTL 0x00 /* 16-bits register */
- #define SPI_6368_MSG_CTL_WIDTH 16
diff --git a/target/linux/brcm63xx/patches-3.8/441-MIPS-BCM63XX-enable-USB-for-BCM6362.patch b/target/linux/brcm63xx/patches-3.8/441-MIPS-BCM63XX-enable-USB-for-BCM6362.patch
deleted file mode 100644
index 86e2a1a..0000000
--- a/target/linux/brcm63xx/patches-3.8/441-MIPS-BCM63XX-enable-USB-for-BCM6362.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From fb9e98936590637c26b66d60137a7b44b329a254 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 12 Feb 2012 14:40:56 +0100
-Subject: [PATCH 59/84] MIPS: BCM63XX: enable USB for BCM6362
-
-BCM6362 has the same USB controller as BCM6368.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/Kconfig | 2 ++
- arch/mips/bcm63xx/clk.c | 4 ++++
- arch/mips/bcm63xx/dev-usb-ehci.c | 3 ++-
- arch/mips/bcm63xx/dev-usb-ohci.c | 2 +-
- drivers/usb/host/ehci-bcm63xx.c | 2 +-
- drivers/usb/host/ohci-bcm63xx.c | 2 +-
- 6 files changed, 11 insertions(+), 4 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -40,6 +40,8 @@ config BCM63XX_CPU_6358
- config BCM63XX_CPU_6362
- bool "support 6362 CPU"
- select HW_HAS_PCI
-+ select BCM63XX_OHCI
-+ select BCM63XX_EHCI
-
- config BCM63XX_CPU_6368
- bool "support 6368 CPU"
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -167,6 +167,8 @@ static void usbh_set(struct clk *clk, in
- bcm_hwclock_set(CKCTL_6328_USBH_EN, enable);
- else if (BCMCPU_IS_6348())
- bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
-+ else if (BCMCPU_IS_6362())
-+ bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
- else if (BCMCPU_IS_6368())
- bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
- else
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -81,7 +81,8 @@ static struct platform_device bcm63xx_eh
-
- int __init bcm63xx_ehci_register(void)
- {
-- if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6368())
-+ if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() &&
-+ !BCMCPU_IS_6368())
- return 0;
-
- ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
---- a/arch/mips/bcm63xx/usb-common.c
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -100,7 +100,7 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
- bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
- USBH_PRIV_TEST_6358_REG);
-
-- } else if (BCMCPU_IS_6328() || BCMCPU_IS_6368()) {
-+ } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
- reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
- reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
- reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-@@ -135,7 +135,7 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
- bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
- USBH_PRIV_TEST_6358_REG);
-
-- } else if (BCMCPU_IS_6328() || BCMCPU_IS_6368()) {
-+ } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
- reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
- reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
- reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
diff --git a/target/linux/brcm63xx/patches-3.8/442-MIPS-BCM63XX-enable-enetsw-for-BCM6362.patch b/target/linux/brcm63xx/patches-3.8/442-MIPS-BCM63XX-enable-enetsw-for-BCM6362.patch
deleted file mode 100644
index 7061147..0000000
--- a/target/linux/brcm63xx/patches-3.8/442-MIPS-BCM63XX-enable-enetsw-for-BCM6362.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From eac04ec501cac3069c279ccaa72fce4f530a4071 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 8 Jul 2012 21:07:12 +0200
-Subject: [PATCH 68/72] MIPS: BCM63XX: enable enetsw for BCM6362
-
----
- arch/mips/bcm63xx/clk.c | 4 +++-
- arch/mips/bcm63xx/dev-enet.c | 6 ++++--
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h | 1 +
- 3 files changed, 8 insertions(+), 3 deletions(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -121,11 +121,13 @@ static void enetsw_set(struct clk *clk,
- {
- u32 mask;
-
-- if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
-+ if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
- return;
-
- if (BCMCPU_IS_6328())
- mask = CKCTL_6328_ROBOSW_EN;
-+ else if (BCMCPU_IS_6362())
-+ mask = CKCTL_6362_ROBOSW_EN;
- else
- mask = CKCTL_6368_ROBOSW_EN | CKCTL_6368_SWPKT_USB_EN |
- CKCTL_6368_SWPKT_SAR_EN;
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -141,7 +141,7 @@ static int __init register_shared(void)
- shared_res[0].end = shared_res[0].start;
- shared_res[0].end += (RSET_ENETDMA_SIZE) - 1;
-
-- if (BCMCPU_IS_6328() || BCMCPU_IS_6368())
-+ if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368())
- chan_count = 32;
- else
- chan_count = 16;
-@@ -224,7 +224,7 @@ bcm63xx_enetsw_register(const struct bcm
- {
- int ret;
-
-- if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
-+ if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
- return -ENODEV;
-
- ret = register_shared();
-@@ -243,6 +243,8 @@ bcm63xx_enetsw_register(const struct bcm
-
- if (BCMCPU_IS_6328())
- enetsw_pd.num_ports = ENETSW_PORTS_6328;
-+ else if (BCMCPU_IS_6362())
-+ enetsw_pd.num_ports = ENETSW_PORTS_6362;
- else if (BCMCPU_IS_6368())
- enetsw_pd.num_ports = ENETSW_PORTS_6368;
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-@@ -44,6 +44,7 @@ struct bcm63xx_enet_platform_data {
- */
- #define ENETSW_MAX_PORT 6
- #define ENETSW_PORTS_6328 5 /* 4 FE PHY + 1 RGMII */
-+#define ENETSW_PORTS_6362 6 /* 4 FE PHY + 2 RGMII */
- #define ENETSW_PORTS_6368 6 /* 4 FE PHY + 2 RGMII */
-
- #define ENETSW_RGMII_PORT0 4
diff --git a/target/linux/brcm63xx/patches-3.8/511-board_V2500V.patch b/target/linux/brcm63xx/patches-3.8/511-board_V2500V.patch
index 899a894..a2d78a6 100644
--- a/target/linux/brcm63xx/patches-3.8/511-board_V2500V.patch
+++ b/target/linux/brcm63xx/patches-3.8/511-board_V2500V.patch
@@ -107,7 +107,7 @@
#include <bcm63xx_cpu.h>
#include <bcm63xx_dev_flash.h>
#include <bcm63xx_dev_hsspi.h>
-@@ -162,6 +163,13 @@ int __init bcm63xx_flash_register(int nu
+@@ -157,6 +158,13 @@ int __init bcm63xx_flash_register(int nu
val = bcm_mpi_readl(MPI_CSBASE_REG(0));
val &= MPI_CSBASE_BASE_MASK;
diff --git a/target/linux/brcm63xx/patches-3.8/553-board_rta770bw.patch b/target/linux/brcm63xx/patches-3.8/533-board_rta770bw.patch
index 9e4b792..181a0a9 100644
--- a/target/linux/brcm63xx/patches-3.8/553-board_rta770bw.patch
+++ b/target/linux/brcm63xx/patches-3.8/533-board_rta770bw.patch
@@ -56,7 +56,7 @@
#endif
/*
-@@ -3313,6 +3362,7 @@ static const struct board_info __initcon
+@@ -3196,6 +3245,7 @@ static const struct board_info __initcon
#endif
#ifdef CONFIG_BCM63XX_CPU_6345
&board_96345gw2,
diff --git a/target/linux/brcm63xx/patches-3.8/554-board_hw556.patch b/target/linux/brcm63xx/patches-3.8/534-board_hw556.patch
index 55aadee..e0a1542 100644
--- a/target/linux/brcm63xx/patches-3.8/554-board_hw556.patch
+++ b/target/linux/brcm63xx/patches-3.8/534-board_hw556.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2973,6 +2973,374 @@ static struct board_info __initdata boar
+@@ -2856,6 +2856,374 @@ static struct board_info __initdata boar
},
};
@@ -375,7 +375,7 @@
/* T-Home Speedport W 303V Typ B */
static struct board_info __initdata board_spw303v = {
.name = "96358-502V",
-@@ -3401,6 +3769,10 @@ static const struct board_info __initcon
+@@ -3284,6 +3652,10 @@ static const struct board_info __initcon
&board_nb4_fxc_r2,
&board_ct6373_1,
&board_HW553,
@@ -386,7 +386,7 @@
&board_spw303v,
&board_DVAG3810BN,
#endif
-@@ -3466,13 +3838,37 @@ static void __init boardid_fixup(u8 *boo
+@@ -3349,13 +3721,37 @@ static void __init boardid_fixup(u8 *boo
struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K);
char *board_name = (char *)bcm63xx_nvram_get_name();
@@ -433,7 +433,7 @@
--- a/drivers/mtd/bcm63xxpart.c
+++ b/drivers/mtd/bcm63xxpart.c
-@@ -93,6 +93,11 @@ static int bcm63xx_parse_cfe_partitions(
+@@ -94,6 +94,11 @@ static int bcm63xx_parse_cfe_partitions(
BCM63XX_CFE_BLOCK_SIZE);
cfelen = cfe_erasesize;
@@ -442,6 +442,6 @@
+ if (!strncmp(bcm63xx_nvram_get_name(), "HW556", 5))
+ cfelen = 0x20000;
+
- nvramlen = bcm63xx_nvram_get_psi_size() * 1024;
+ nvramlen = bcm63xx_nvram_get_psi_size();
nvramlen = roundup(nvramlen, cfe_erasesize);
nvramaddr = master->size - nvramlen;
diff --git a/target/linux/brcm63xx/patches-3.8/556-board_rta770w.patch b/target/linux/brcm63xx/patches-3.8/535-board_rta770w.patch
index 7528bd8..f456512 100644
--- a/target/linux/brcm63xx/patches-3.8/556-board_rta770w.patch
+++ b/target/linux/brcm63xx/patches-3.8/535-board_rta770w.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -803,6 +803,60 @@ static struct board_info __initdata boar
+@@ -799,6 +799,60 @@ static struct board_info __initdata boar
},
},
};
@@ -61,7 +61,7 @@
#endif
/*
-@@ -3757,6 +3811,7 @@ static const struct board_info __initcon
+@@ -3614,6 +3668,7 @@ static const struct board_info __initcon
#ifdef CONFIG_BCM63XX_CPU_6345
&board_96345gw2,
&board_rta770bw,
diff --git a/target/linux/brcm63xx/patches-3.8/550-alice_gate2_leds.patch b/target/linux/brcm63xx/patches-3.8/550-alice_gate2_leds.patch
index 144b63e..c53351e 100644
--- a/target/linux/brcm63xx/patches-3.8/550-alice_gate2_leds.patch
+++ b/target/linux/brcm63xx/patches-3.8/550-alice_gate2_leds.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1953,6 +1953,99 @@ static struct board_info __initdata boar
+@@ -2056,6 +2056,99 @@ static struct board_info __initdata boar
.has_ohci0 = 1,
.has_ehci0 = 1,
diff --git a/target/linux/brcm63xx/patches-3.8/551-96348gw_a_leds.patch b/target/linux/brcm63xx/patches-3.8/551-96348gw_a_leds.patch
index 958f5fc..2da141f 100644
--- a/target/linux/brcm63xx/patches-3.8/551-96348gw_a_leds.patch
+++ b/target/linux/brcm63xx/patches-3.8/551-96348gw_a_leds.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1398,6 +1398,19 @@ static struct board_info __initdata boar
+@@ -1501,6 +1501,19 @@ static struct board_info __initdata boar
},
.has_ohci0 = 1,
diff --git a/target/linux/brcm63xx/patches-3.8/552-board_96348gw-10_reset_button.patch b/target/linux/brcm63xx/patches-3.8/552-board_96348gw-10_reset_button.patch
index f12b6f0..898063f 100644
--- a/target/linux/brcm63xx/patches-3.8/552-board_96348gw-10_reset_button.patch
+++ b/target/linux/brcm63xx/patches-3.8/552-board_96348gw-10_reset_button.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -858,6 +858,17 @@ static struct board_info __initdata boar
+@@ -961,6 +961,17 @@ static struct board_info __initdata boar
.active_low = 1,
},
},
diff --git a/target/linux/brcm63xx/patches-3.8/555-boards_probe_switch.patch b/target/linux/brcm63xx/patches-3.8/553-boards_probe_switch.patch
index 445353f..6ab4e97 100644
--- a/target/linux/brcm63xx/patches-3.8/555-boards_probe_switch.patch
+++ b/target/linux/brcm63xx/patches-3.8/553-boards_probe_switch.patch
@@ -18,7 +18,7 @@
.force_speed_100 = 1,
.force_duplex_full = 1,
},
-@@ -863,6 +867,8 @@ static struct board_info __initdata boar
+@@ -917,6 +921,8 @@ static struct board_info __initdata boar
.use_internal_phy = 1,
},
.enet1 = {
@@ -27,7 +27,7 @@
.force_speed_100 = 1,
.force_duplex_full = 1,
},
-@@ -935,6 +941,8 @@ static struct board_info __initdata boar
+@@ -989,6 +995,8 @@ static struct board_info __initdata boar
},
.enet1 = {
@@ -36,7 +36,7 @@
.force_speed_100 = 1,
.force_duplex_full = 1,
},
-@@ -1164,6 +1172,8 @@ static struct board_info __initdata boar
+@@ -1218,6 +1226,8 @@ static struct board_info __initdata boar
.use_internal_phy = 1,
},
.enet1 = {
@@ -45,7 +45,7 @@
.force_speed_100 = 1,
.force_duplex_full = 1,
},
-@@ -1339,6 +1349,8 @@ static struct board_info __initdata boar
+@@ -1393,6 +1403,8 @@ static struct board_info __initdata boar
},
.enet1 = {
@@ -54,7 +54,7 @@
.force_speed_100 = 1,
.force_duplex_full = 1,
},
-@@ -1413,6 +1425,8 @@ static struct board_info __initdata boar
+@@ -1467,6 +1479,8 @@ static struct board_info __initdata boar
.use_internal_phy = 1,
},
.enet1 = {
@@ -63,7 +63,7 @@
.force_speed_100 = 1,
.force_duplex_full = 1,
},
-@@ -1434,6 +1448,8 @@ static struct board_info __initdata boar
+@@ -1488,6 +1502,8 @@ static struct board_info __initdata boar
.use_internal_phy = 1,
},
.enet1 = {
@@ -72,7 +72,7 @@
.force_speed_100 = 1,
.force_duplex_full = 1,
},
-@@ -1453,6 +1469,8 @@ static struct board_info __initdata boar
+@@ -1507,6 +1523,8 @@ static struct board_info __initdata boar
.use_internal_phy = 1,
},
.enet1 = {
@@ -81,7 +81,7 @@
.force_speed_100 = 1,
.force_duplex_full = 1,
},
-@@ -1828,6 +1846,8 @@ static struct board_info __initdata boar
+@@ -1882,6 +1900,8 @@ static struct board_info __initdata boar
},
.enet1 = {
@@ -90,7 +90,7 @@
.force_speed_100 = 1,
.force_duplex_full = 1,
},
-@@ -1880,6 +1900,8 @@ static struct board_info __initdata boar
+@@ -1934,6 +1954,8 @@ static struct board_info __initdata boar
},
.enet1 = {
@@ -99,7 +99,7 @@
.force_speed_100 = 1,
.force_duplex_full = 1,
},
-@@ -2020,6 +2042,8 @@ static struct board_info __initdata boar
+@@ -2074,6 +2096,8 @@ static struct board_info __initdata boar
},
.enet1 = {
@@ -108,7 +108,7 @@
.force_speed_100 = 1,
.force_duplex_full = 1,
},
-@@ -2137,6 +2161,8 @@ static struct board_info __initdata boar
+@@ -2191,6 +2215,8 @@ static struct board_info __initdata boar
},
.enet1 = {
diff --git a/target/linux/brcm63xx/patches-3.8/800-wl_exports.patch b/target/linux/brcm63xx/patches-3.8/800-wl_exports.patch
index 4d8a238..cae2118 100644
--- a/target/linux/brcm63xx/patches-3.8/800-wl_exports.patch
+++ b/target/linux/brcm63xx/patches-3.8/800-wl_exports.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/nvram.c
+++ b/arch/mips/bcm63xx/nvram.c
-@@ -40,6 +40,13 @@ struct bcm963xx_nvram {
+@@ -41,6 +41,13 @@ struct bcm963xx_nvram {
static struct bcm963xx_nvram nvram;
static int mac_addr_used;
@@ -14,7 +14,7 @@
void __init bcm63xx_nvram_init(void *addr)
{
unsigned int check_len;
-@@ -47,6 +54,7 @@ void __init bcm63xx_nvram_init(void *add
+@@ -48,6 +55,7 @@ void __init bcm63xx_nvram_init(void *add
/* extract nvram data */
memcpy(&nvram, addr, sizeof(nvram));