summaryrefslogtreecommitdiff
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/diag.sh3
-rw-r--r--target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom1
-rw-r--r--target/linux/ramips/base-files/lib/preinit/06_set_iface_mac4
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h1
-rw-r--r--target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig5
-rw-r--r--target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile1
-rw-r--r--target/linux/ramips/files/arch/mips/ralink/rt305x/mach-rt-n10-plus.c74
-rw-r--r--target/linux/ramips/image/Makefile12
-rw-r--r--target/linux/ramips/rt305x/config-3.21
11 files changed, 106 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 26f0d1f..0a13ddb 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -66,6 +66,9 @@ get_status_led() {
rt-n15)
status_led="rt-n15:blue:power"
;;
+ rt-n10-plus)
+ status_led="asus:green:wps"
+ ;;
rt-n56u)
status_led="asus:blue:power"
;;
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index eb756a5..148fda2 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -38,6 +38,7 @@ case "$FIRMWARE" in
rt2x00_eeprom_extract "devdata" 16384 272
;;
+ rt-n10-plus | \
rt-g32-b1)
rt2x00_eeprom_extract "devconf" 0 272
;;
diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index 66eb6b9..cb9c7ab 100644
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -36,6 +36,10 @@ preinit_set_mac_address() {
mac=$(ramips_get_mac_binary board-nvram 65440)
ifconfig eth0 hw ether $mac 2>/dev/null
;;
+ rt-n10-plus)
+ mac=$(ramips_get_mac_binary devconf 4)
+ ifconfig eth0 hw ether $mac 2>/dev/null
+ ;;
esac
}
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 728f525..3567209 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -98,6 +98,9 @@ ramips_board_name() {
*"RT-G32 B1")
name="rt-g32-b1"
;;
+ *"RT-N10+")
+ name="rt-n10-plus"
+ ;;
*"RT-N15")
name="rt-n15"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index a2f3513..1f6910d 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -27,6 +27,7 @@ platform_check_image() {
nw718 | \
omni-emb | \
rt-g32-b1 | \
+ rt-n10-plus | \
rt-n15 | \
rt-n56u | \
sl-r7205 | \
diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
index ac7aac4..cfb6bc6 100644
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
@@ -26,6 +26,7 @@ enum ramips_mach_type {
RAMIPS_MACH_DIR_600_B1, /* D-Link DIR-600 B1 */
RAMIPS_MACH_DIR_600_B2, /* D-Link DIR-600 B2 */
RAMIPS_MACH_RT_G32_B1, /* Asus RT-G32 B1 */
+ RAMIPS_MACH_RT_N10_PLUS, /* Asus RT-N10+ */
RAMIPS_MACH_NW718, /* Netcore NW718 */
/* RT3052 based machines */
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
index 1644832..ae05190 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
@@ -26,6 +26,11 @@ config RT305X_MACH_RT_G32_REVB
bool "Asus RT-G32 revB board support"
select RALINK_DEV_GPIO_BUTTONS
+config RT305X_MACH_RT_N10_PLUS
+ bool "Asus RT-N10+ board support"
+ select RALINK_DEV_GPIO_BUTTONS
+ select RALINK_DEV_GPIO_LEDS
+
config RT305X_MACH_HW550_3G
bool "Aztech HW550-3G support"
select RALINK_DEV_GPIO_BUTTONS
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
index c8b0289..ce1d568 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_RT305X_MACH_NW718) += mach-nw718.o
obj-$(CONFIG_RT305X_MACH_OMNI_EMB) += mach-omni-emb.o
obj-$(CONFIG_RT305X_MACH_PWH2004) += mach-pwh2004.o
obj-$(CONFIG_RT305X_MACH_RT_G32_REVB) += mach-rt-g32-revb.o
+obj-$(CONFIG_RT305X_MACH_RT_N10_PLUS) += mach-rt-n10-plus.o
obj-$(CONFIG_RT305X_MACH_SL_R7205) += mach-sl-r7205.o
obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o
obj-$(CONFIG_RT305X_MACH_W502U) += mach-w502u.o
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-rt-n10-plus.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-rt-n10-plus.c
new file mode 100644
index 0000000..5b496d4
--- /dev/null
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-rt-n10-plus.c
@@ -0,0 +1,74 @@
+/*
+ * ASUS RT-N10+ board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt305x.h>
+#include <asm/mach-ralink/rt305x_regs.h>
+
+#include "devices.h"
+
+#define RT_N10_PLUS_GPIO_LED_WPS 14
+
+#define RT_N10_PLUS_GPIO_BUTTON_WPS 0 /* active low */
+#define RT_N10_PLUS_GPIO_BUTTON_RESET 10 /* active low */
+
+#define RT_N10_PLUS_KEYS_POLL_INTERVAL 20
+#define RT_N10_PLUS_KEYS_DEBOUNCE_INTERVAL (3 * RT_N10_PLUS_KEYS_POLL_INTERVAL)
+
+static struct gpio_led rt_n10_plus_leds_gpio[] __initdata = {
+ {
+ .name = "asus:green:wps",
+ .gpio = RT_N10_PLUS_GPIO_LED_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button rt_n10_plus_gpio_buttons[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = RT_N10_PLUS_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = RT_N10_PLUS_GPIO_BUTTON_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = RT_N10_PLUS_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = RT_N10_PLUS_GPIO_BUTTON_WPS,
+ .active_low = 1,
+ }
+};
+
+static void __init rt_n10_plus_init(void)
+{
+ rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
+
+ rt305x_register_flash(0);
+
+ rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
+ rt305x_register_ethernet();
+ ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n10_plus_leds_gpio),
+ rt_n10_plus_leds_gpio);
+ ramips_register_gpio_buttons(-1, RT_N10_PLUS_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(rt_n10_plus_gpio_buttons),
+ rt_n10_plus_gpio_buttons);
+ rt305x_register_wifi();
+ rt305x_register_wdt();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_RT_N10_PLUS, "RT-N10-PLUS", "Asus RT-N10+",
+ rt_n10_plus_init);
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 031b03a..bb6124c 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -205,6 +205,13 @@ define BuildFirmware/RTG32B1
$(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/spi,$(mtdlayout_rtg32b1)),$(mtd_rtg32b1_kernel_part_size),$(mtd_rtg32b1_rootfs_part_size))
endef
+mtdlayout_rtn10plus=192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware)
+mtd_rtn10plus_kernel_part_size=917504
+mtd_rtn10plus_rootfs_part_size=2949120
+define BuildFirmware/RTN10PLUS
+ $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_rtn10plus)),$(mtd_rtn10plus_kernel_part_size),$(mtd_rtn10plus_rootfs_part_size))
+endef
+
mtdlayout_whrg300n=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,960k(kernel),2752k(rootfs),64k(user)ro,3712k@0x50000(firmware)
define BuildFirmware/WHRG300N
$(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N,ttyS1,57600,phys)
@@ -343,6 +350,10 @@ define Image/Build/Profile/RTG32B1
$(call Image/Build/Template/$(fs_squash)/$(1),RTG32B1,rt-g32-b1,RT-G32-B1)
endef
+define Image/Build/Profile/RTN10PLUS
+ $(call Image/Build/Template/$(fs_squash)/$(1),RTN10PLUS,rt-n10-plus,RT-N10-PLUS)
+endef
+
define Image/Build/Profile/SLR7205
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,sl-r7205,SL-R7205,ttyS1,57600,phys)
endef
@@ -388,6 +399,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/DIR300B1,$(1))
$(call Image/Build/Profile/ESR9753,$(1))
$(call Image/Build/Profile/F5D8235V2,$(1))
+ $(call Image/Build/Profile/RTN10PLUS,$(1))
$(call Image/Build/Profile/FONERA20N,$(1))
$(call Image/Build/Profile/HW5503G,$(1))
$(call Image/Build/Profile/MOFI35003GN,$(1))
diff --git a/target/linux/ramips/rt305x/config-3.2 b/target/linux/ramips/rt305x/config-3.2
index c44dba3..09355dd 100644
--- a/target/linux/ramips/rt305x/config-3.2
+++ b/target/linux/ramips/rt305x/config-3.2
@@ -107,6 +107,7 @@ CONFIG_RT305X_MACH_NW718=y
CONFIG_RT305X_MACH_OMNI_EMB=y
CONFIG_RT305X_MACH_PWH2004=y
CONFIG_RT305X_MACH_RT_G32_REVB=y
+CONFIG_RT305X_MACH_RT_N10_PLUS=y
CONFIG_RT305X_MACH_SL_R7205=y
CONFIG_RT305X_MACH_V22RW_2X2=y
CONFIG_RT305X_MACH_W502U=y