diff options
Diffstat (limited to 'target/linux')
53 files changed, 8311 insertions, 0 deletions
diff --git a/target/linux/oxnas/Makefile b/target/linux/oxnas/Makefile new file mode 100644 index 0000000..67d45bc --- /dev/null +++ b/target/linux/oxnas/Makefile @@ -0,0 +1,28 @@ +# +# Copyright (C) 2013 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk + +ARCH:=arm +BOARD:=oxnas +BOARDNAME:=PLXTECH NAS782X +DEVICE_TYPE:=nas +FEATURES:=gpio nand pcie usb usbgadget ramdisk rtc squashfs +CPU_TYPE:=mpcore + +MAINTAINER:=Daniel Golle <daniel@makrotopia.org> + +KERNEL_PATCHVER:=3.18 + +include $(INCLUDE_DIR)/target.mk + +DEFAULT_PACKAGES += \ + kmod-button-hotplug kmod-input-gpio-keys-polled kmod-leds-gpio \ + kmod-i2c-gpio uboot-envtools uboot-oxnas-ox820 + +KERNELNAME:=zImage dtbs + +$(eval $(call BuildTarget)) diff --git a/target/linux/oxnas/base-files.mk b/target/linux/oxnas/base-files.mk new file mode 100644 index 0000000..fdd2c71 --- /dev/null +++ b/target/linux/oxnas/base-files.mk @@ -0,0 +1,3 @@ +define Package/base-files/install-target + rm -f $(1)/etc/config/network +endef diff --git a/target/linux/oxnas/base-files/etc/board.d/01_leds b/target/linux/oxnas/base-files/etc/board.d/01_leds new file mode 100755 index 0000000..17e37cd --- /dev/null +++ b/target/linux/oxnas/base-files/etc/board.d/01_leds @@ -0,0 +1,25 @@ +#!/bin/sh + +. /lib/functions/uci-defaults-new.sh +. /lib/oxnas.sh + +board=$(oxnas_board_name) +board_config_update + +case $board in + stg-212) + ucidef_set_led_default "power" "power" "zyxel:blue:status" "1" + ucidef_set_led_usbdev "usb" "USB" "$1" "1-1" + ;; + kd20) + ucidef_set_led_default "power" "power" "kd20:blue:status" "1" + ;; + pogoplugpro | pogoplugv3) + ucidef_set_led_default "power" "power" "pogoplug:blue:internal" "1" + ;; + +esac + +board_config_flush + +exit 0 diff --git a/target/linux/oxnas/base-files/etc/board.d/02_network b/target/linux/oxnas/base-files/etc/board.d/02_network new file mode 100755 index 0000000..3a10584 --- /dev/null +++ b/target/linux/oxnas/base-files/etc/board.d/02_network @@ -0,0 +1,12 @@ +#!/bin/sh + +. /lib/functions/uci-defaults-new.sh +. /lib/functions/system.sh + +board_config_update + +ucidef_set_interface_lan "eth0" + +board_config_flush + +exit 0 diff --git a/target/linux/oxnas/base-files/etc/diag.sh b/target/linux/oxnas/base-files/etc/diag.sh new file mode 100755 index 0000000..ba42218 --- /dev/null +++ b/target/linux/oxnas/base-files/etc/diag.sh @@ -0,0 +1,35 @@ +#!/bin/sh +# Copyright (C) 2009-2013 OpenWrt.org + +. /lib/functions/leds.sh +. /lib/oxnas.sh + +get_status_led() { + case $(oxnas_board_name) in + stg212) + status_led="zyxel:blue:status" + ;; + kd20) + status_led="kd20:blue:status" + ;; + pogoplugpro | pogoplugv3) + status_led="pogoplug:blue:internal" + ;; + esac +} + +set_state() { + get_status_led + + case "$1" in + preinit) + status_led_blink_preinit + ;; + failsafe) + status_led_blink_failsafe + ;; + done) + status_led_on + ;; + esac +} diff --git a/target/linux/oxnas/base-files/lib/oxnas.sh b/target/linux/oxnas/base-files/lib/oxnas.sh new file mode 100755 index 0000000..1a04d55 --- /dev/null +++ b/target/linux/oxnas/base-files/lib/oxnas.sh @@ -0,0 +1,48 @@ +#!/bin/sh +# +# Copyright (C) 2013 OpenWrt.org +# + +OXNAS_BOARD_NAME= +OXNAS_MODEL= + +oxnas_board_detect() { + local machine + local name + + machine=$(cat /proc/device-tree/model) + + case "$machine" in + *"MitraStar Technology Corp. STG-212"*) + name="stg212" + ;; + *"Shuttle KD20"*) + name="kd20" + ;; + *"Pogoplug Pro"*) + name="pogoplugpro" + ;; + *"Pogoplug V3"*) + name="pogoplugv3" + ;; + esac + + [ -z "$name" ] && name="unknown" + + [ -z "$OXNAS_BOARD_NAME" ] && OXNAS_BOARD_NAME="$name" + [ -z "$OXNAS_MODEL" ] && OXNAS_MODEL="$machine" + + [ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/" + + echo "$OXNAS_BOARD_NAME" > /tmp/sysinfo/board_name + echo "$OXNAS_MODEL" > /tmp/sysinfo/model +} + +oxnas_board_name() { + local name + + [ -f /tmp/sysinfo/board_name ] && name=$(cat /tmp/sysinfo/board_name) + [ -z "$name" ] && name="unknown" + + echo "$name" +} diff --git a/target/linux/oxnas/base-files/lib/preinit/03_preinit_do_oxnas.sh b/target/linux/oxnas/base-files/lib/preinit/03_preinit_do_oxnas.sh new file mode 100644 index 0000000..ca7bce1 --- /dev/null +++ b/target/linux/oxnas/base-files/lib/preinit/03_preinit_do_oxnas.sh @@ -0,0 +1,9 @@ +#!/bin/sh + +do_oxnas() { + . /lib/oxnas.sh + + oxnas_board_detect +} + +boot_hook_add preinit_main do_oxnas diff --git a/target/linux/oxnas/base-files/lib/upgrade/platform.sh b/target/linux/oxnas/base-files/lib/upgrade/platform.sh new file mode 100644 index 0000000..8591c7d --- /dev/null +++ b/target/linux/oxnas/base-files/lib/upgrade/platform.sh @@ -0,0 +1,35 @@ +# +# Copyright (C) 2014 OpenWrt.org +# + +. /lib/oxnas.sh + +RAMFS_COPY_DATA=/lib/oxnas.sh + +platform_check_image() { + local board=$(oxnas_board_name) + + [ "$ARGC" -gt 1 ] && return 1 + + nand_do_platform_check $board $1 + return $? +} + +platform_do_upgrade() { + if [ $$ -ne 1 ]; then + echo "not PID 1, upgrade aborted." + return 1; + fi + platform_do_upgrade_phase2 "$1" "$CONF_TAR" "$SAVE_CONFIG" +} + + +disable_watchdog() { + killall watchdog + ( ps | grep -v 'grep' | grep '/dev/watchdog' ) && { + echo 'Could not disable watchdog' + return 1 + } +} + +append sysupgrade_pre_upgrade disable_watchdog diff --git a/target/linux/oxnas/config-3.18 b/target/linux/oxnas/config-3.18 new file mode 100644 index 0000000..4997dc1 --- /dev/null +++ b/target/linux/oxnas/config-3.18 @@ -0,0 +1,366 @@ +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAS_RESET_CONTROLLER=y +# CONFIG_ARCH_HAS_SG_CHAIN is not set +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set +CONFIG_ARCH_NR_GPIO=0 +CONFIG_ARCH_OXNAS=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ARM=y +# CONFIG_ARM_CPU_SUSPEND is not set +CONFIG_ARM_GIC=y +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_ARM_THUMB=y +CONFIG_ARM_UNWIND=y +CONFIG_ATA=y +# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set +CONFIG_AUTO_ZRELADDR=y +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_BLK_DEV_SD=y +CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1 +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1 +# CONFIG_CACHE_L2X0 is not set +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLKSRC_MMIO=y +CONFIG_CLKSRC_OF=y +CONFIG_CLKSRC_RPS_TIMER=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_CMDLINE="console=ttyS0,115200n8 earlyprintk=serial" +CONFIG_COMMON_CLK=y +# CONFIG_COMMON_CLK_PXA is not set +CONFIG_COMPACTION=y +CONFIG_CONSOLE_POLL=y +CONFIG_COREDUMP=y +CONFIG_CPU_32v6=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_ABRT_EV6=y +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_CPU_HAS_ASID=y +# CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y +CONFIG_CPU_PABRT_V6=y +CONFIG_CPU_PM=y +CONFIG_CPU_RMAP=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_V6K=y +CONFIG_CRC16=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_XZ=y +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_DEBUG_LL=y +CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" +# CONFIG_DEBUG_LL_UART_8250 is not set +CONFIG_DEBUG_LL_UART_NONE=y +# CONFIG_DEBUG_LL_UART_PL01X is not set +# CONFIG_DEBUG_UART_8250 is not set +# CONFIG_DEBUG_UART_BCM63XX is not set +# CONFIG_DEBUG_UART_PL01X is not set +# CONFIG_DEBUG_USER is not set +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=8 +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DIRECT_IO=y +CONFIG_DMADEVICES=y +CONFIG_DMA_CACHE_FIQ_BROADCAST=y +# CONFIG_DMA_CACHE_RWFO is not set +CONFIG_DMA_ENGINE=y +CONFIG_DMA_OF=y +CONFIG_DNOTIFY=y +CONFIG_DTC=y +# CONFIG_DW_DMAC_CORE is not set +# CONFIG_DW_DMAC_PCI is not set +CONFIG_EARLY_PRINTK=y +CONFIG_FIQ=y +# CONFIG_FSL_EDMA is not set +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_PINCONF=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GLOB=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_DEVRES=y +CONFIG_GPIO_GENERIC=y +CONFIG_GPIO_GENERIC_PLATFORM=y +# CONFIG_GPIO_SYSCON is not set +CONFIG_GPIO_SYSFS=y +CONFIG_HANDLE_DOMAIN_IRQ=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_ARM_SCU=y +CONFIG_HAVE_ARM_TWD=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_BPF_JIT=y +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZ4=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_HAVE_KERNEL_XZ=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_SMP=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_UID16=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HOTPLUG_CPU=y +CONFIG_HZ_FIXED=0 +CONFIG_I2C=y +CONFIG_I2C_ALGOBIT=y +CONFIG_I2C_BOARDINFO=y +CONFIG_ICPLUS_PHY=y +CONFIG_INET_DIAG=y +CONFIG_INET_LRO=y +CONFIG_INET_TCP_DIAG=y +CONFIG_INET_UDP_DIAG=y +CONFIG_INPUT=y +# CONFIG_INPUT_MISC is not set +# CONFIG_INTEL_SOC_PMIC is not set +CONFIG_IOMMU_HELPER=y +CONFIG_IOMMU_SUPPORT=y +# CONFIG_IP_ADVANCED_ROUTER is not set +# CONFIG_IP_MULTICAST is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_BOOTP is not set +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_RARP is not set +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_TIME_ACCOUNTING=y +CONFIG_IRQ_WORK=y +# CONFIG_ISDN is not set +# CONFIG_JFFS2_FS is not set +CONFIG_JUMP_LABEL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KERNFS=y +CONFIG_KGDB=y +# CONFIG_KGDB_KDB is not set +CONFIG_KGDB_SERIAL_CONSOLE=y +# CONFIG_KGDB_TESTS is not set +# CONFIG_LDM_DEBUG is not set +CONFIG_LDM_PARTITION=y +# CONFIG_LEDS_SYSCON is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +# CONFIG_LEDS_TRIGGER_NETDEV is not set +# CONFIG_LEDS_TRIGGER_TIMER is not set +CONFIG_LIBFDT=y +CONFIG_LOCKUP_DETECTOR=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_MACH_OX820=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_MAILBOX=y +CONFIG_MDIO_BOARDINFO=y +# CONFIG_MFD_AXP20X is not set +CONFIG_MFD_CORE=y +CONFIG_MFD_SYSCON=y +CONFIG_MFD_VEXPRESS_SYSREG=y +CONFIG_MIGHT_HAVE_PCI=y +CONFIG_MIGRATION=y +CONFIG_MODULES_USE_ELF_REL=y +# CONFIG_MODULE_STRIPPED is not set +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_OXNAS=y +CONFIG_MTD_NAND_PLATFORM=y +CONFIG_MTD_SPLIT_FIRMWARE=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BEB_LIMIT=20 +CONFIG_MTD_UBI_BLOCK=y +# CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is not set +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UIMAGE_SPLIT=y +CONFIG_MULTI_IRQ_HANDLER=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +# CONFIG_NBPFAXI_DMA is not set +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NET_FLOW_LIMIT=y +CONFIG_NET_PTP_CLASSIFY=y +CONFIG_NLS=y +CONFIG_NO_BOOTMEM=y +CONFIG_NO_HZ_COMMON=y +CONFIG_NO_HZ_IDLE=y +CONFIG_NR_CPUS=2 +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_ADDRESS_PCI=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IOMMU=y +CONFIG_OF_IRQ=y +CONFIG_OF_MDIO=y +CONFIG_OF_MTD=y +CONFIG_OF_NET=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +CONFIG_OF_RESERVED_MEM=y +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_PACKET_DIAG=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PCI=y +CONFIG_PCIEAER=y +CONFIG_PCIEASPM=y +# CONFIG_PCIEASPM_DEBUG is not set +CONFIG_PCIEASPM_DEFAULT=y +# CONFIG_PCIEASPM_PERFORMANCE is not set +# CONFIG_PCIEASPM_POWERSAVE is not set +CONFIG_PCIEPORTBUS=y +CONFIG_PCIE_PME=y +CONFIG_PCI_OXNAS=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PHYLIB=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_OXNAS=y +CONFIG_PLXTECH_RPS=y +CONFIG_PM=y +CONFIG_PM_CLK=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_RUNTIME=y +CONFIG_PPS=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_PRINTK_TIME=y +CONFIG_PTP_1588_CLOCK=y +CONFIG_PWM=y +# CONFIG_PWM_FSL_FTM is not set +CONFIG_PWM_SYSFS=y +CONFIG_RAS=y +CONFIG_RCU_CPU_STALL_TIMEOUT=21 +CONFIG_RCU_STALL_COMMON=y +CONFIG_REALTEK_PHY=y +CONFIG_REGMAP=y +CONFIG_REGMAP_MMIO=y +CONFIG_RELAY=y +CONFIG_RESET_CONTROLLER=y +CONFIG_RESET_CONTROLLER_OXNAS=y +CONFIG_RFS_ACCEL=y +CONFIG_RPS=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_DRV_CMOS is not set +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_SATA_OXNAS=y +CONFIG_SCHED_HRTICK=y +CONFIG_SCSI=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_EARLYCON=y +# CONFIG_SERIAL_KGDB_NMI is not set +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SMP=y +CONFIG_SMP_ON_UP=y +CONFIG_SOCK_DIAG=y +CONFIG_STMMAC_DA=y +CONFIG_STMMAC_DEBUG_FS=y +CONFIG_STMMAC_ETH=y +# CONFIG_STMMAC_PCI is not set +CONFIG_STMMAC_PLATFORM=y +CONFIG_STOP_MACHINE=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_SWIOTLB=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_TREE_RCU=y +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_XZ=y +CONFIG_UBIFS_FS_ZLIB=y +CONFIG_UID16=y +CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h" +CONFIG_USB=y +CONFIG_USB_COMMON=y +# CONFIG_USB_EHCI_HCD is not set +CONFIG_USB_SUPPORT=y +# CONFIG_USB_UHCI_HCD is not set +CONFIG_USE_OF=y +CONFIG_VECTORS_BASE=0xffff0000 +# CONFIG_VEXPRESS_CONFIG is not set +# CONFIG_VEXPRESS_SYSCFG is not set +# CONFIG_VFP is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_WATCHDOG_CORE=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_XPS=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_BCJ=y +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts new file mode 100644 index 0000000..e7ee587 --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts @@ -0,0 +1,136 @@ +/* + * Copyright (C) 2014 Daniel Golle <daniel@makrotopia.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include "ox820.dtsi" + +/ { + model = "Shuttle KD20"; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk=serial"; + }; + + pcie-controller@47C00000 { + status = "okay"; + }; + + uart@44200000 { + status = "okay"; + }; + + sata@45900000 { + status = "okay"; + }; + + nand@41000000 { + status = "okay"; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x00e00000>; + /*read-only;*/ + }; + + partition@e00000 { + label = "ubi"; + reg = <0x00e00000 0x07200000>; + }; + }; + + ethernet@40400000 { + status = "okay"; + snps,phy-addr = <1>; + phy-mode = "rgmii-id"; + }; + + ehci@40200100 { + status = "okay"; + }; + + i2c-gpio { + compatible = "i2c-gpio"; + gpios = <&GPIOB 9 0 &GPIOB 10 0>; + i2c-gpio,delay-us = <10>; + #address-cells = <1>; + #size-cells = <0>; + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + power { + label = "power"; + gpios = <&GPIOA 10 1>; + linux,code = <116>; + }; + reset { + label = "reset"; + gpios = <&GPIOA 11 1>; + linux,code = <0x198>; + }; + eject1 { + label = "eject1"; + gpios = <&GPIOA 5 1>; + linux,code = <161>; + }; + eject2 { + label = "eject2"; + gpios = <&GPIOA 6 1>; + linux,code = <162>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "kd20:blue:status"; + gpios = <&GPIOB 16 0>; + }; + status2 { + label = "kd20:red:status"; + gpios = <&GPIOB 17 0>; + }; + hdd1blue { + label = "kd20:blue:hdd1"; + gpios = <&GPIOA 27 0>; + }; + hdd1red { + label = "kd20:red:hdd1"; + gpios = <&GPIOB 4 0>; + }; + hdd2blue { + label = "kd20:blue:hdd2"; + gpios = <&GPIOB 6 0>; + }; + hdd2red { + label = "kd20:red:hdd2"; + gpios = <&GPIOB 7 0>; + }; + usb { + label = "kd20:blue:usb"; + gpios = <&GPIOB 8 0>; + }; + buzzer { + label = "kd20:buzzer"; + gpios = <&GPIOB 11 0>; + }; + }; + + gpio-fan { + compatible = "gpio-fan"; + gpios = <&GPIOA 2 1>; + }; +}; diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-pro.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-pro.dts new file mode 100644 index 0000000..f3730c3 --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-pro.dts @@ -0,0 +1,86 @@ +/* + * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include "ox820.dtsi" + +/ { + model = "Pogoplug Pro"; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk=serial"; + }; + + pcie-controller@47C00000 { + status = "okay"; + }; + + uart@44200000 { + status = "okay"; + }; + + sata@45900000 { + status = "okay"; + }; + + nand@41000000 { + status = "okay"; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x00e00000>; + /*read-only;*/ + }; + + partition@e00000 { + label = "ubi"; + reg = <0x00e00000 0x07200000>; + }; + }; + + ethernet@40400000 { + status = "okay"; + }; + + ehci@40200100 { + status = "okay"; + }; + + pinctrl { + leds { + pinctrl_leds: leds-0 { + plxtech,pins = + <0 2 0 0 /* MF_A2 */ + 1 16 0 0 /* MF_B16 */ + 1 17 0 0>; /* MF_B17 */ + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + blue { + label = "pogoplug:blue:internal"; + gpios = <&GPIOA 2 0>; + + }; + + orange { + label = "pogoplug:orange:usr"; + gpios = <&GPIOB 16 1>; + }; + + green { + label = "pogoplug:green:usr"; + gpios = <&GPIOB 17 1>; + }; + }; +}; diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-v3.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-v3.dts new file mode 100644 index 0000000..8029132 --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-v3.dts @@ -0,0 +1,83 @@ +/* + * Copyright (C) 2014 Daniel Golle <daniel@makrotopia.org> + * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include "ox820.dtsi" + +/ { + model = "Pogoplug V3"; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk=serial"; + }; + + uart@44200000 { + status = "okay"; + }; + + sata@45900000 { + status = "okay"; + }; + + nand@41000000 { + status = "okay"; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x00e00000>; + /*read-only;*/ + }; + + partition@e00000 { + label = "ubi"; + reg = <0x00e00000 0x07200000>; + }; + }; + + ethernet@40400000 { + status = "okay"; + }; + + ehci@40200100 { + status = "okay"; + }; + + pinctrl { + leds { + pinctrl_leds: leds-0 { + plxtech,pins = + <0 2 0 0 /* MF_A2 */ + 1 16 0 0 /* MF_B16 */ + 1 17 0 0>; /* MF_B17 */ + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + blue { + label = "pogoplug:blue:internal"; + gpios = <&GPIOA 2 0>; + }; + + orange { + label = "pogoplug:orange:usr"; + gpios = <&GPIOB 16 1>; + }; + + green { + label = "pogoplug:green:usr"; + gpios = <&GPIOB 17 1>; + }; + }; + +}; diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-stg212.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-stg212.dts new file mode 100644 index 0000000..5d83806 --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-stg212.dts @@ -0,0 +1,91 @@ +/* + * Copyright (C) 2013 OpenWrt.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "ox820.dtsi" + +/ { + model = "MitraStar Technology Corp. STG-212"; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk=serial"; + }; + + uart@44200000 { + status = "okay"; + }; + + sata@45900000 { + status = "okay"; + }; + + nand@41000000 { + status = "okay"; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x00e00000>; + /*read-only;*/ + }; + + partition@e00000 { + label = "ubi"; + reg = <0x00e00000 0x07200000>; + }; + }; + + ethernet@40400000 { + status = "okay"; + }; + + ehci@40200100 { + status = "okay"; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&GPIOB 11 1>; + linux,code = <0x198>; + }; + copy { + label = "copy"; + gpios = <&GPIOB 13 1>; + linux,code = <0x85>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "zyxel:blue:status"; + gpios = <&GPIOB 5 0>; + }; + status2 { + label = "zyxel:red:status"; + gpios = <&GPIOB 6 1>; + }; + copy { + label = "zyxel:orange:copy"; + gpios = <&GPIOB 8 1>; + }; + }; + + i2c-gpio { + compatible = "i2c-gpio"; + gpios = <&GPIOB 9 0 &GPIOB 10 0>; + i2c-gpio,delay-us = <10>; + }; + +}; diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi b/target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi new file mode 100644 index 0000000..0a643a4 --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi @@ -0,0 +1,342 @@ +/* + * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "plxtech,nas7820", "plxtech,nas782x"; + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart0; + /* alias to determine bank index */ + gpio0 = &GPIOA; + gpio1 = &GPIOB; + + ethernet0 = &gmac; + }; + + cpus { + cpu@0 { + compatible = "arm,arm11mpcore"; + }; + cpu@1 { + compatible = "arm,arm11mpcore"; + }; + }; + + gic: gic@47001000 { + compatible = "arm,arm11mp-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x47001000 0x1000>, + <0x47000100 0x0100>; + }; + + rst: reset-controller@44E00034 { + compatible = "plxtech,nas782x-reset"; + #reset-cells = <1>; + reg = <0x44E00034 0x8>; /* currently not used */ + }; + + rps: rps@44400000 { + compatible = "plxtech,nas782x-rps"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x44400000 0x14>; + interrupts = <0 5 0x304>; + }; + + /* external oscillator */ + osc: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + sysclk: sysclk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clocks = <&osc>; + }; + + plla: plla@44e001f0 { + compatible = "plxtech,nas782x-plla"; + #clock-cells = <0>; + clocks = <&osc>; + reg = <0x44e001f0 0x10>; + }; + + pllb: pllb@44f001f0 { + compatible = "plxtech,nas782x-pllb"; + #clock-cells = <0>; + clocks = <&osc>; + reg = <0x44f001f0 0x10>; + resets = <&rst 31>; + }; + + stdclk: stdclk { + compatible = "plxtech,nas782x-stdclk"; + #clock-cells = <1>; + clocks = <&osc>; + }; + + twdclk: twdclk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clocks = <&plla>; + }; + + gmacclk: gmacclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + pinctrl { + /* act as a simple bus, so children will be probed automatically */ + #address-cells = <1>; + #size-cells = <1>; + compatible = "plxtech,nas782x-pinctrl", "simple-bus"; + ranges; + + plxtech,mux-mask = < + 0xFFFFFFFF 0xCC0FFDF9 0xFC000E60 0x0F03F7E0 0xF00C0FE0 + 0x0003FFFF 0x00037FFF 0x0003FFF8 0x00000F00 0x0003F7F3 + >; + + GPIOA: gpio@44000000 { + compatible = "plxtech,nas782x-gpio"; + reg = <0x44000000 0x100>, <0x44E00000 0x200>; + interrupts = <0 21 0x304>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + #gpio-lines = <32>; /* real gpio pin count */ + }; + + GPIOB: gpio@44100000 { + compatible = "plxtech,nas782x-gpio"; + reg = <0x44100000 0x100>, <0x44F00000 0x200>; + interrupts = <0 22 0x304>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + #gpio-lines = <18>; /* real gpio pin count */ + }; + + uart0 { + pinctrl_uart0: uart0-0 { + plxtech,pins = + <0 30 5 0 /* MF_A30 PINMUX_ALT PINMUX_UARTA_SIN */ + 0 31 5 0>; /* MF_A31 PINMUX_ALT PINMUX_UARTA_SOUT */ + }; + }; + + gmac0 { + pinctrl_gmac0: gmac0-0 { + plxtech,pins = + <0 3 1 0 /* MF_A3 PINMUX_2 PINMUX_MACA_MDC */ + 0 4 1 0>; /* MF_A4 PINMUX_2 PINMUX_MACA_MDIO */ + }; + }; + + nand0 { + pinctrl_nand0: nand0-0 { + plxtech,pins = + <0 12 1 0 /* MF_A12 PINMUX_2 PINMUX_STATIC_DATA0 */ + 0 13 1 0 /* MF_A13 PINMUX_2 PINMUX_STATIC_DATA1 */ + 0 14 1 0 /* MF_A14 PINMUX_2 PINMUX_STATIC_DATA2 */ + 0 15 1 0 /* MF_A15 PINMUX_2 PINMUX_STATIC_DATA3 */ + 0 16 1 0 /* MF_A16 PINMUX_2 PINMUX_STATIC_DATA4 */ + 0 17 1 0 /* MF_A17 PINMUX_2 PINMUX_STATIC_DATA5 */ + 0 18 1 0 /* MF_A18 PINMUX_2 PINMUX_STATIC_DATA6 */ + 0 19 1 0 /* MF_A19 PINMUX_2 PINMUX_STATIC_DATA7 */ + + 0 20 1 0 /* MF_A20 PINMUX_2 PINMUX_STATIC_NWE */ + 0 21 1 0 /* MF_A21 PINMUX_2 PINMUX_STATIC_NOE */ + 0 22 1 0 /* MF_A22 PINMUX_2 PINMUX_STATIC_NCS */ + 0 23 1 0 /* MF_A23 PINMUX_2 PINMUX_STATIC_ADDR18 */ + 0 24 1 0>; /* MF_A24 PINMUX_2 PINMUX_STATIC_ADDR19 */ + }; + }; + }; + + pcie-controller@47C00000 { + compatible = "plxtech,nas782x-pcie"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + + /* flag & space bus address host address size */ + ranges = < 0x82000000 0 0x48000000 0x48000000 0 0x2000000 + 0xC2000000 0 0x4A000000 0x4A000000 0 0x1E00000 + 0x81000000 0 0x4BE00000 0x4BE00000 0 0x0100000 + 0x80000000 0 0x4BF00000 0x4BF00000 0 0x0100000>; + + bus-range = <0x00 0x7f>; + + /* cfg inbound translator phy*/ + reg = <0x47C00000 0x1000>, <0x47D00000 0x100>, <0x44A00000 0x10>; + + #interrupt-cells = <1>; + /* wild card mask, match all bus address & interrupt specifier */ + /* format: bus address mask, interrupt specifier mask */ + /* each bit 1 means need match, 0 means ignored when match */ + interrupt-map-mask = <0 0 0 0>; + /* format: a list of: bus address, interrupt specifier, + * parent interrupt controller & specifier */ + interrupt-map = <0 0 0 0 &gic 0 19 0x304>; + + gpios = <&GPIOB 12 0>; + clocks = <&stdclk 8>, <&pllb>; + clock-names = "pcie", "busclk"; + resets = <&rst 7>, <&rst 14>; + reset-names = "pcie", "phy"; + + plxtech,pcie-hcsl-bit = <2>; + plxtech,pcie-ctrl-offset = <0x120>; + plxtech,pcie-outbound-offset = <0x138>; + status = "disabled"; + }; + + pcie-controller@47E00000 { + compatible = "plxtech,nas782x-pcie"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + + /* flag & space bus address host address size */ + ranges = < 0x82000000 0 0x4C000000 0x4C000000 0 0x2000000 + 0xC2000000 0 0x4E000000 0x4E000000 0 0x1E00000 + 0x81000000 0 0x4FE00000 0x4FE00000 0 0x0100000 + 0x80000000 0 0x4FF00000 0x4FF00000 0 0x0100000>; + + bus-range = <0x80 0xff>; + + /* cfg inbound translator phy*/ + reg = <0x47E00000 0x1000>, <0x47F00000 0x100>, <0x44A00000 0x10>; + + #interrupt-cells = <1>; + /* wild card mask, match all bus address & interrupt specifier */ + /* format: bus address mask, interrupt specifier mask */ + /* each bit 1 means need match, 0 means ignored when match */ + interrupt-map-mask = <0 0 0 0>; + /* format: a list of: bus address, interrupt specifier, + * parent interrupt controller & specifier */ + interrupt-map = <0 0 0 0 &gic 0 20 0x304>; + + /* gpios = <&GPIOB 12 0>; */ + clocks = <&stdclk 11>, <&pllb>; + clock-names = "pcie", "busclk"; + resets = <&rst 23>, <&rst 14>; + reset-names = "pcie", "phy"; + + plxtech,pcie-hcsl-bit = <3>; + plxtech,pcie-ctrl-offset = <0x124>; + plxtech,pcie-outbound-offset = <0x174>; + status = "disabled"; + }; + + local-timer@47000600 { + compatible = "arm,arm11mp-twd-timer"; + reg = <0x47000600 0x20>; + interrupts = <1 13 0x304>; /* percpu, irq 29, cpu mask 3, level high */ + clocks = <&twdclk>; + }; + + watchdog@47000620 { + compatible = "mpcore_wdt"; + reg = <0x47000620 0x20>; + interrupts = <1 14 0x304>; /* percpu, irq 30, cpu mask 3, level high */ + clocks = <&twdclk>; + }; + + timer@44400200 { + compatible = "plxtech,nas782x-rps-timer"; + reg = <0x44400200 0x40>; + clocks = <&sysclk>; + }; + + uart0: uart@44200000 { + compatible = "ns16550a"; + reg = <0x44200000 0x100>; + clock-frequency = <6250000>; + interrupts = <0 23 0x304>; + reg-shift = <0>; + fifo-size = <16>; + reg-io-width = <1>; + current-speed = <115200>; + no-loopback-test; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "disabled"; + }; + + sata@45900000 { + compatible = "plxtech,nas782x-sata"; + /* port sgdma core */ + reg = <0x45900000 0x100>, <0x459B0000 0x10>, <0x459E0000 0x2000>, + /* phy descriptors (optional) */ + <0x44900000 0x0C>, <0x50000000 0x1000>; + interrupts = <0 18 0x304>; + clocks = <&stdclk 4>; + resets = <&rst 11>, <&rst 12>, <&rst 13>; + reset-names = "sata", "link", "phy"; + status = "disabled"; + }; + + nand@41000000 { + compatible = "plxtech,nand-nas782x", "gen_nand"; + reg = <0x41000000 0x100000>, <0x41C00000 0x20>; + nand-ecc-mode = "soft"; + clocks = <&stdclk 9>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand0>; + resets = <&rst 15>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + }; + + gmac: ethernet@40400000 { + compatible = "plxtech,nas782x-gmac", "snps,dwmac"; + reg = <0x40400000 0x2000>; + interrupts = <0 8 0x304>, <0 17 0x304>; + interrupt-names = "macirq", "eth_wake_irq"; + mac-address = [000000000000]; /* Filled in by U-Boot */ + phy-mode = "rgmii"; + clocks = <&stdclk 7>, <&gmacclk>; + clock-names = "gmac", "stmmaceth"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gmac0>; + resets = <&rst 6>; + status = "disabled"; + }; + + ehci@40200100 { + compatible = "plxtech,nas782x-ehci"; + reg = <0x40200100 0xf00>; + interrupts = <0 7 0x304>; + clocks = <&stdclk 6>, <&pllb>, <&stdclk 12>; + clock-names = "usb", "refsrc", "phyref"; + resets = <&rst 4>, <&rst 5>, <&rst 26>; + reset-names = "host", "phya", "phyb"; + /* Otherwise ref300 is used, which is derived from sata phy + * in that case, usb depends on sata initialization */ + /* FIXME: how to make this dependency explicit ? */ + plxtch,ehci_use_pllb; + status = "disabled"; + }; +}; diff --git a/target/linux/oxnas/files/arch/arm/configs/ox820_defconfig b/target/linux/oxnas/files/arch/arm/configs/ox820_defconfig new file mode 100644 index 0000000..bb0a9d6 --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/configs/ox820_defconfig @@ -0,0 +1,104 @@ +CONFIG_CROSS_COMPILE="arm-linux-gnueabi-" +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IRQ_TIME_ACCOUNTING=y +CONFIG_CGROUPS=y +CONFIG_NAMESPACES=y +CONFIG_EMBEDDED=y +# CONFIG_COMPAT_BRK is not set +CONFIG_JUMP_LABEL=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_ARCH_OXNAS=y +# CONFIG_DMA_CACHE_RWFO is not set +CONFIG_DMA_CACHE_FIQ_BROADCAST=y +CONFIG_PCI=y +CONFIG_PCI_OXNAS=y +CONFIG_SMP=y +# CONFIG_SMP_ON_UP is not set +CONFIG_NR_CPUS=2 +CONFIG_HOTPLUG_CPU=y +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_UACCESS_WITH_MEMCPY=y +CONFIG_USE_OF=y +CONFIG_BINFMT_MISC=y +# CONFIG_SUSPEND is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IPV6=y +CONFIG_CFG80211=y +CONFIG_MAC80211=y +CONFIG_MAC80211_RC_PID=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_OXNAS=y +CONFIG_MTD_UBI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_ATA=y +CONFIG_SATA_OXNAS=y +CONFIG_NETDEVICES=y +CONFIG_STMMAC_ETH=y +CONFIG_STMMAC_DEBUG_FS=y +CONFIG_STMMAC_DA=y +CONFIG_ATH_CARDS=y +CONFIG_ATH9K=y +CONFIG_ATH9K_LEGACY_RATE_CONTROL=y +# CONFIG_RTL_CARDS is not set +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_GPIO_SYSFS=y +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_OXNAS=y +CONFIG_USB_STORAGE=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_COMMON_CLK_DEBUG=y +CONFIG_EXT2_FS=y +CONFIG_EXT4_FS=y +CONFIG_FUSE_FS=y +CONFIG_VFAT_FS=y +CONFIG_NTFS_FS=m +CONFIG_NTFS_RW=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_UBIFS_FS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y +CONFIG_PRINTK_TIME=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_FTRACE is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y +CONFIG_DEBUG_LL_UART_8250=y +CONFIG_DEBUG_UART_PHYS=0x44200000 +CONFIG_DEBUG_UART_VIRT=0xF0000000 +CONFIG_DEBUG_UART_8250_SHIFT=0 +CONFIG_EARLY_PRINTK=y +CONFIG_CRYPTO_ANSI_CPRNG=y diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/Kconfig b/target/linux/oxnas/files/arch/arm/mach-oxnas/Kconfig new file mode 100644 index 0000000..eb96f1b --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/Kconfig @@ -0,0 +1,24 @@ +choice + prompt "Oxnas platform type" + default MACH_OXNAS + depends on ARCH_OXNAS + +config MACH_OX820 + bool "Generic NAS7820 Support" + select ARM_GIC + select GENERIC_CLOCKEVENTS + select CPU_V6K + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + select HAVE_SMP + select PLXTECH_RPS + select CLKSRC_OF + select CLKSRC_RPS_TIMER + select USB_ARCH_HAS_EHCI + select PINCTRL_OXNAS + select PINCTRL + select RESET_CONTROLLER_OXNAS + help + Include support for the ox820 platform. + +endchoice diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile b/target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile new file mode 100644 index 0000000..6862c34 --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the linux kernel. +# + +obj-$(CONFIG_MACH_OX820) += mach-ox820.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_DMA_CACHE_FIQ_BROADCAST) += fiq.o +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile.boot b/target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile.boot new file mode 100644 index 0000000..b52e473 --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile.boot @@ -0,0 +1,2 @@ + zreladdr-y += 0x60008000 +params_phys-y := 0x60000100 diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/fiq.S b/target/linux/oxnas/files/arch/arm/mach-oxnas/fiq.S new file mode 100644 index 0000000..6acd5a7 --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/fiq.S @@ -0,0 +1,87 @@ +/* + * Copyright (C) 2012 Gateworks Corporation + * Chris Lang <clang@gateworks.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/asm-offsets.h> + +#define D_CACHE_LINE_SIZE 32 + + .text + +/* + * R8 - DMA Start Address + * R9 - DMA Length + * R10 - DMA Direction + * R11 - DMA type + * R12 - fiq_buffer Address +*/ + + .global ox820_fiq_end +ENTRY(ox820_fiq_start) + str r8, [r13] + + ldmia r12, {r8, r9, r10} + and r11, r10, #0x3000000 + and r10, r10, #0xff + + teq r11, #0x1000000 + beq ox820_dma_map_area + teq r11, #0x2000000 + beq ox820_dma_unmap_area + /* fall through */ +ox820_dma_flush_range: + bic r8, r8, #D_CACHE_LINE_SIZE - 1 +1: + mcr p15, 0, r8, c7, c14, 1 @ clean & invalidate D line + add r8, r8, #D_CACHE_LINE_SIZE + cmp r8, r9 + blo 1b + /* fall through */ +ox820_fiq_exit: + mov r8, #0 + str r8, [r12, #8] + mcr p15, 0, r8, c7, c10, 4 @ drain write buffer + subs pc, lr, #4 + +ox820_dma_map_area: + add r9, r9, r8 + teq r10, #DMA_FROM_DEVICE + beq ox820_dma_inv_range + teq r10, #DMA_TO_DEVICE + bne ox820_dma_flush_range + /* fall through */ +ox820_dma_clean_range: + bic r8, r8, #D_CACHE_LINE_SIZE - 1 +1: + mcr p15, 0, r8, c7, c10, 1 @ clean D line + add r8, r8, #D_CACHE_LINE_SIZE + cmp r8, r9 + blo 1b + b ox820_fiq_exit + +ox820_dma_unmap_area: + add r9, r9, r8 + teq r10, #DMA_TO_DEVICE + beq ox820_fiq_exit + /* fall through */ +ox820_dma_inv_range: + tst r8, #D_CACHE_LINE_SIZE - 1 + bic r8, r8, #D_CACHE_LINE_SIZE - 1 + mcrne p15, 0, r8, c7, c10, 1 @ clean D line + tst r9, #D_CACHE_LINE_SIZE - 1 + bic r9, r9, #D_CACHE_LINE_SIZE - 1 + mcrne p15, 0, r9, c7, c14, 1 @ clean & invalidate D line +1: + mcr p15, 0, r8, c7, c6, 1 @ invalidate D line + add r8, r8, #D_CACHE_LINE_SIZE + cmp r8, r9 + blo 1b + b ox820_fiq_exit + +ox820_fiq_end: diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/headsmp.S b/target/linux/oxnas/files/arch/arm/mach-oxnas/headsmp.S new file mode 100644 index 0000000..a63edae --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/headsmp.S @@ -0,0 +1,27 @@ +/* + * linux/arch/arm/mach-ox820/headsmp.S + * + * Copyright (c) 2003 ARM Limited + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <linux/init.h> + + __INIT + +/* + * OX820 specific entry point for secondary CPUs. + */ +ENTRY(ox820_secondary_startup) + mov r4, #0 + /* invalidate both caches and branch target cache */ + mcr p15, 0, r4, c7, c7, 0 + /* + * we've been released from the holding pen: secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/hotplug.c b/target/linux/oxnas/files/arch/arm/mach-oxnas/hotplug.c new file mode 100644 index 0000000..861beee --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/hotplug.c @@ -0,0 +1,112 @@ +/* + * linux/arch/arm/mach-realview/hotplug.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/smp.h> + +#include <asm/cp15.h> +#include <asm/smp_plat.h> +#include <mach/smp.h> + +static inline void cpu_enter_lowpower(void) +{ + unsigned int v; + + asm volatile( + " mcr p15, 0, %1, c7, c5, 0\n" + " mcr p15, 0, %1, c7, c10, 4\n" + /* + * Turn off coherency + */ + " mrc p15, 0, %0, c1, c0, 1\n" + " bic %0, %0, #0x20\n" + " mcr p15, 0, %0, c1, c0, 1\n" + " mrc p15, 0, %0, c1, c0, 0\n" + " bic %0, %0, %2\n" + " mcr p15, 0, %0, c1, c0, 0\n" + : "=&r" (v) + : "r" (0), "Ir" (CR_C) + : "cc"); +} + +static inline void cpu_leave_lowpower(void) +{ + unsigned int v; + + asm volatile("mrc p15, 0, %0, c1, c0, 0\n" + " orr %0, %0, %1\n" + " mcr p15, 0, %0, c1, c0, 0\n" + " mrc p15, 0, %0, c1, c0, 1\n" + " orr %0, %0, #0x20\n" + " mcr p15, 0, %0, c1, c0, 1\n" + : "=&r" (v) + : "Ir" (CR_C) + : "cc"); +} + +static inline void platform_do_lowpower(unsigned int cpu, int *spurious) +{ + /* + * there is no power-control hardware on this platform, so all + * we can do is put the core into WFI; this is safe as the calling + * code will have already disabled interrupts + */ + for (;;) { + /* + * here's the WFI + */ + asm(".word 0xe320f003\n" + : + : + : "memory", "cc"); + + if (read_pen_release() == cpu_logical_map(cpu)) { + /* + * OK, proper wakeup, we're done + */ + break; + } + + /* + * Getting here, means that we have come out of WFI without + * having been woken up - this shouldn't happen + * + * Just note it happening - when we're woken, we can report + * its occurrence. + */ + (*spurious)++; + } +} + +/* + * platform-specific code to shutdown a CPU + * + * Called with IRQs disabled + */ +void __ref ox820_cpu_die(unsigned int cpu) +{ + int spurious = 0; + + /* + * we're ready for shutdown now, so do it + */ + cpu_enter_lowpower(); + platform_do_lowpower(cpu, &spurious); + + /* + * bring this CPU back into the world of cache + * coherency, and then restore interrupts + */ + cpu_leave_lowpower(); + + if (spurious) + pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious); +} diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/hardware.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/hardware.h new file mode 100644 index 0000000..caae772 --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/hardware.h @@ -0,0 +1,233 @@ +/* + * arch/arm/mach-0x820/include/mach/hardware.h + * + * Copyright (C) 2009 Oxford Semiconductor Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include <linux/io.h> +#include <mach/iomap.h> + +/* + * Location of flags and vectors in SRAM for controlling the booting of the + * secondary ARM11 processors. + */ + +#define OXNAS_SCU_BASE_VA OXNAS_PERCPU_BASE_VA +#define OXNAS_GICN_BASE_VA(n) (OXNAS_PERCPU_BASE_VA + 0x200 + n*0x100) + +#define HOLDINGPEN_CPU IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc8) +#define HOLDINGPEN_LOCATION IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc4) + +/** + * System block reset and clock control + */ +#define SYS_CTRL_PCI_STAT IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x20) +#define SYSCTRL_CLK_STAT IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x24) +#define SYS_CTRL_CLK_SET_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x2C) +#define SYS_CTRL_CLK_CLR_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x30) +#define SYS_CTRL_RST_SET_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x34) +#define SYS_CTRL_RST_CLR_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x38) + +#define SYS_CTRL_PLLSYS_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x48) +#define SYS_CTRL_CLK_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x64) +#define SYS_CTRL_PLLSYS_KEY_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x6C) +#define SYS_CTRL_GMAC_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x78) +#define SYS_CTRL_GMAC_DELAY_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x100) + +/* Scratch registers */ +#define SYS_CTRL_SCRATCHWORD0 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc4) +#define SYS_CTRL_SCRATCHWORD1 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc8) +#define SYS_CTRL_SCRATCHWORD2 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xcc) +#define SYS_CTRL_SCRATCHWORD3 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xd0) + +#define SYS_CTRL_PLLA_CTRL0 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F0) +#define SYS_CTRL_PLLA_CTRL1 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F4) +#define SYS_CTRL_PLLA_CTRL2 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F8) +#define SYS_CTRL_PLLA_CTRL3 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1FC) + +#define SYS_CTRL_USBHSMPH_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x40) +#define SYS_CTRL_USBHSMPH_STAT IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x44) +#define SYS_CTRL_REF300_DIV IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xF8) +#define SYS_CTRL_USBHSPHY_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x84) +#define SYS_CTRL_USB_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x90) + +/* pcie */ +#define SYS_CTRL_HCSL_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x114) + +/* System control multi-function pin function selection */ +#define SYS_CTRL_SECONDARY_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x14) +#define SYS_CTRL_TERTIARY_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x8c) +#define SYS_CTRL_QUATERNARY_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x94) +#define SYS_CTRL_DEBUG_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x9c) +#define SYS_CTRL_ALTERNATIVE_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xa4) +#define SYS_CTRL_PULLUP_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xac) + +/* Secure control multi-function pin function selection */ +#define SEC_CTRL_SECONDARY_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x14) +#define SEC_CTRL_TERTIARY_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x8c) +#define SEC_CTRL_QUATERNARY_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x94) +#define SEC_CTRL_DEBUG_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x9c) +#define SEC_CTRL_ALTERNATIVE_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0xa4) +#define SEC_CTRL_PULLUP_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0xac) + +#define SEC_CTRL_COPRO_CTRL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x68) +#define SEC_CTRL_SECURE_CTRL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x98) +#define SEC_CTRL_LEON_DEBUG IOMEM(OXNAS_SECCRTL_BASE_VA + 0xF0) +#define SEC_CTRL_PLLB_DIV_CTRL IOMEM(OXNAS_SECCRTL_BASE_VA + 0xF8) +#define SEC_CTRL_PLLB_CTRL0 IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F0) +#define SEC_CTRL_PLLB_CTRL1 IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F4) +#define SEC_CTRL_PLLB_CTRL8 IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F4) + +#define RPSA_IRQ_SOFT IOMEM(OXNAS_RPSA_BASE_VA + 0x10) +#define RPSA_FIQ_ENABLE IOMEM(OXNAS_RPSA_BASE_VA + 0x108) +#define RPSA_FIQ_DISABLE IOMEM(OXNAS_RPSA_BASE_VA + 0x10C) +#define RPSA_FIQ_IRQ_TO_FIQ IOMEM(OXNAS_RPSA_BASE_VA + 0x1FC) + +#define RPSC_IRQ_SOFT IOMEM(OXNAS_RPSC_BASE_VA + 0x10) +#define RPSC_FIQ_ENABLE IOMEM(OXNAS_RPSC_BASE_VA + 0x108) +#define RPSC_FIQ_DISABLE IOMEM(OXNAS_RPSC_BASE_VA + 0x10C) +#define RPSC_FIQ_IRQ_TO_FIQ IOMEM(OXNAS_RPSC_BASE_VA + 0x1FC) + +#define RPSA_TIMER2_VAL IOMEM(OXNAS_RPSA_BASE_VA + 0x224) + +#define REF300_DIV_INT_SHIFT 8 +#define REF300_DIV_FRAC_SHIFT 0 +#define REF300_DIV_INT(val) ((val) << REF300_DIV_INT_SHIFT) +#define REF300_DIV_FRAC(val) ((val) << REF300_DIV_FRAC_SHIFT) + +#define USBHSPHY_SUSPENDM_MANUAL_ENABLE 16 +#define USBHSPHY_SUSPENDM_MANUAL_STATE 15 +#define USBHSPHY_ATE_ESET 14 +#define USBHSPHY_TEST_DIN 6 +#define USBHSPHY_TEST_ADD 2 +#define USBHSPHY_TEST_DOUT_SEL 1 +#define USBHSPHY_TEST_CLK 0 + +#define USB_CTRL_USBAPHY_CKSEL_SHIFT 5 +#define USB_CLK_XTAL0_XTAL1 (0 << USB_CTRL_USBAPHY_CKSEL_SHIFT) +#define USB_CLK_XTAL0 (1 << USB_CTRL_USBAPHY_CKSEL_SHIFT) +#define USB_CLK_INTERNAL (2 << USB_CTRL_USBAPHY_CKSEL_SHIFT) + +#define USBAMUX_DEVICE BIT(4) + +#define USBPHY_REFCLKDIV_SHIFT 2 +#define USB_PHY_REF_12MHZ (0 << USBPHY_REFCLKDIV_SHIFT) +#define USB_PHY_REF_24MHZ (1 << USBPHY_REFCLKDIV_SHIFT) +#define USB_PHY_REF_48MHZ (2 << USBPHY_REFCLKDIV_SHIFT) + +#define USB_CTRL_USB_CKO_SEL_BIT 0 + +#define USB_INT_CLK_XTAL 0 +#define USB_INT_CLK_REF300 2 +#define USB_INT_CLK_PLLB 3 + +#define SYS_CTRL_GMAC_CKEN_RX_IN 14 +#define SYS_CTRL_GMAC_CKEN_RXN_OUT 13 +#define SYS_CTRL_GMAC_CKEN_RX_OUT 12 +#define SYS_CTRL_GMAC_CKEN_TX_IN 10 +#define SYS_CTRL_GMAC_CKEN_TXN_OUT 9 +#define SYS_CTRL_GMAC_CKEN_TX_OUT 8 +#define SYS_CTRL_GMAC_RX_SOURCE 7 +#define SYS_CTRL_GMAC_TX_SOURCE 6 +#define SYS_CTRL_GMAC_LOW_TX_SOURCE 4 +#define SYS_CTRL_GMAC_AUTO_TX_SOURCE 3 +#define SYS_CTRL_GMAC_RGMII 2 +#define SYS_CTRL_GMAC_SIMPLE_MUX 1 +#define SYS_CTRL_GMAC_CKEN_GTX 0 +#define SYS_CTRL_GMAC_TX_VARDELAY_SHIFT 0 +#define SYS_CTRL_GMAC_TXN_VARDELAY_SHIFT 8 +#define SYS_CTRL_GMAC_RX_VARDELAY_SHIFT 16 +#define SYS_CTRL_GMAC_RXN_VARDELAY_SHIFT 24 +#define SYS_CTRL_GMAC_TX_VARDELAY(d) ((d)<<SYS_CTRL_GMAC_TX_VARDELAY_SHIFT) +#define SYS_CTRL_GMAC_TXN_VARDELAY(d) ((d)<<SYS_CTRL_GMAC_TXN_VARDELAY_SHIFT) +#define SYS_CTRL_GMAC_RX_VARDELAY(d) ((d)<<SYS_CTRL_GMAC_RX_VARDELAY_SHIFT) +#define SYS_CTRL_GMAC_RXN_VARDELAY(d) ((d)<<SYS_CTRL_GMAC_RXN_VARDELAY_SHIFT) + +#define PLLB_BYPASS 1 +#define PLLB_ENSAT 3 +#define PLLB_OUTDIV 4 +#define PLLB_REFDIV 8 +#define PLLB_DIV_INT_SHIFT 8 +#define PLLB_DIV_FRAC_SHIFT 0 +#define PLLB_DIV_INT(val) ((val) << PLLB_DIV_INT_SHIFT) +#define PLLB_DIV_FRAC(val) ((val) << PLLB_DIV_FRAC_SHIFT) + +#define SYS_CTRL_CKCTRL_PCI_DIV_BIT 0 +#define SYS_CTRL_CKCTRL_SLOW_BIT 8 + +#define SYS_CTRL_UART2_DEQ_EN 0 +#define SYS_CTRL_UART3_DEQ_EN 1 +#define SYS_CTRL_UART3_IQ_EN 2 +#define SYS_CTRL_UART4_IQ_EN 3 +#define SYS_CTRL_UART4_NOT_PCI_MODE 4 + +#define SYS_CTRL_PCI_CTRL1_PCI_STATIC_RQ_BIT 11 + +#define PLLA_REFDIV_MASK 0x3F +#define PLLA_REFDIV_SHIFT 8 +#define PLLA_OUTDIV_MASK 0x7 +#define PLLA_OUTDIV_SHIFT 4 + +/* bit numbers of clock control register */ +#define SYS_CTRL_CLK_COPRO 0 +#define SYS_CTRL_CLK_DMA 1 +#define SYS_CTRL_CLK_CIPHER 2 +#define SYS_CTRL_CLK_SD 3 +#define SYS_CTRL_CLK_SATA 4 +#define SYS_CTRL_CLK_I2S 5 +#define SYS_CTRL_CLK_USBHS 6 +#define SYS_CTRL_CLK_MACA 7 +#define SYS_CTRL_CLK_MAC SYS_CTRL_CLK_MACA +#define SYS_CTRL_CLK_PCIEA 8 +#define SYS_CTRL_CLK_STATIC 9 +#define SYS_CTRL_CLK_MACB 10 +#define SYS_CTRL_CLK_PCIEB 11 +#define SYS_CTRL_CLK_REF600 12 +#define SYS_CTRL_CLK_USBDEV 13 +#define SYS_CTRL_CLK_DDR 14 +#define SYS_CTRL_CLK_DDRPHY 15 +#define SYS_CTRL_CLK_DDRCK 16 + + +/* bit numbers of reset control register */ +#define SYS_CTRL_RST_SCU 0 +#define SYS_CTRL_RST_COPRO 1 +#define SYS_CTRL_RST_ARM0 2 +#define SYS_CTRL_RST_ARM1 3 +#define SYS_CTRL_RST_USBHS 4 +#define SYS_CTRL_RST_USBHSPHYA 5 +#define SYS_CTRL_RST_MACA 6 +#define SYS_CTRL_RST_MAC SYS_CTRL_RST_MACA +#define SYS_CTRL_RST_PCIEA 7 +#define SYS_CTRL_RST_SGDMA 8 +#define SYS_CTRL_RST_CIPHER 9 +#define SYS_CTRL_RST_DDR 10 +#define SYS_CTRL_RST_SATA 11 +#define SYS_CTRL_RST_SATA_LINK 12 +#define SYS_CTRL_RST_SATA_PHY 13 +#define SYS_CTRL_RST_PCIEPHY 14 +#define SYS_CTRL_RST_STATIC 15 +#define SYS_CTRL_RST_GPIO 16 +#define SYS_CTRL_RST_UART1 17 +#define SYS_CTRL_RST_UART2 18 +#define SYS_CTRL_RST_MISC 19 +#define SYS_CTRL_RST_I2S 20 +#define SYS_CTRL_RST_SD 21 +#define SYS_CTRL_RST_MACB 22 +#define SYS_CTRL_RST_PCIEB 23 +#define SYS_CTRL_RST_VIDEO 24 +#define SYS_CTRL_RST_DDR_PHY 25 +#define SYS_CTRL_RST_USBHSPHYB 26 +#define SYS_CTRL_RST_USBDEV 27 +#define SYS_CTRL_RST_ARMDBG 29 +#define SYS_CTRL_RST_PLLA 30 +#define SYS_CTRL_RST_PLLB 31 + +#endif diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/iomap.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/iomap.h new file mode 100644 index 0000000..01de7b7 --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/iomap.h @@ -0,0 +1,33 @@ +#ifndef __MACH_OXNAS_IOMAP_H +#define __MACH_OXNAS_IOMAP_H + +#include <linux/sizes.h> + +#define OXNAS_UART1_BASE 0x44200000 +#define OXNAS_UART1_SIZE SZ_32 +#define OXNAS_UART1_BASE_VA 0xF0000000 + +#define OXNAS_UART2_BASE 0x44300000 +#define OXNAS_UART2_SIZE SZ_32 + +#define OXNAS_PERCPU_BASE 0x47000000 +#define OXNAS_PERCPU_SIZE SZ_8K +#define OXNAS_PERCPU_BASE_VA 0xF0002000 + +#define OXNAS_SYSCRTL_BASE 0x44E00000 +#define OXNAS_SYSCRTL_SIZE SZ_4K +#define OXNAS_SYSCRTL_BASE_VA 0xF0004000 + +#define OXNAS_SECCRTL_BASE 0x44F00000 +#define OXNAS_SECCRTL_SIZE SZ_4K +#define OXNAS_SECCRTL_BASE_VA 0xF0005000 + +#define OXNAS_RPSA_BASE 0x44400000 +#define OXNAS_RPSA_SIZE SZ_4K +#define OXNAS_RPSA_BASE_VA 0xF0006000 + +#define OXNAS_RPSC_BASE 0x44500000 +#define OXNAS_RPSC_SIZE SZ_4K +#define OXNAS_RPSC_BASE_VA 0xF0007000 + +#endif diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/irqs.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/irqs.h new file mode 100644 index 0000000..bcafd10 --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/irqs.h @@ -0,0 +1,7 @@ +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H + +#define IRQ_SOFT 1 +#define NR_IRQS 160 + +#endif diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/smp.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/smp.h new file mode 100644 index 0000000..1128635 --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/smp.h @@ -0,0 +1,34 @@ +/* + * smp.h + * + * Created on: Sep 24, 2013 + * Author: mahaijun + */ + +#ifndef _NAS782X_SMP_H_ +#define _NAS782X_SMP_H_ + +#include <mach/hardware.h> + +extern void ox820_secondary_startup(void); +extern void ox820_cpu_die(unsigned int cpu); + +static inline void write_pen_release(int val) +{ + writel(val, HOLDINGPEN_CPU); +} + +static inline int read_pen_release(void) +{ + return readl(HOLDINGPEN_CPU); +} + +extern struct smp_operations ox820_smp_ops; + +extern unsigned char ox820_fiq_start, ox820_fiq_end; +extern void v6_dma_map_area(const void *, size_t, int); +extern void v6_dma_unmap_area(const void *, size_t, int); +extern void v6_dma_flush_range(const void *, const void *); +extern void v6_flush_kern_dcache_area(void *, size_t); + +#endif /* _NAS782X_SMP_H_ */ diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/timex.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/timex.h new file mode 100644 index 0000000..4133594 --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/timex.h @@ -0,0 +1,6 @@ +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H + +#define CLOCK_TICK_RATE 6250000 + +#endif diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/uncompress.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/uncompress.h new file mode 100644 index 0000000..fbc3727 --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/uncompress.h @@ -0,0 +1,32 @@ +/* linux/include/asm-arm/arch-oxnas/uncompress.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#define OXNAS_UART1_BASE 0x44200000 + +static inline void putc(int c) +{ + static volatile unsigned char *uart = + (volatile unsigned char *)OXNAS_UART1_BASE; + + while (!(uart[5] & 0x20)) { /* LSR reg THR empty bit */ + barrier(); + } + uart[0] = c; /* THR register */ +} + +static inline void flush(void) +{ +} + +#define arch_decomp_setup() + +#define arch_decomp_wdog() + +#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/utils.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/utils.h new file mode 100644 index 0000000..910d701 --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/utils.h @@ -0,0 +1,34 @@ +#ifndef _NAS782X_UTILS_H +#define _NAS782X_UTILS_H + +#include <linux/io.h> +#include <mach/hardware.h> + +static inline void oxnas_register_clear_mask(void __iomem *p, unsigned mask) +{ + u32 val = readl_relaxed(p); + + val &= ~mask; + writel_relaxed(val, p); +} + +static inline void oxnas_register_set_mask(void __iomem *p, unsigned mask) +{ + u32 val = readl_relaxed(p); + + val |= mask; + writel_relaxed(val, p); +} + +static inline void oxnas_register_value_mask(void __iomem *p, + unsigned mask, unsigned new_value) +{ + /* TODO sanity check mask & new_value = new_value */ + u32 val = readl_relaxed(p); + + val &= ~mask; + val |= new_value; + writel_relaxed(val, p); +} + +#endif /* _NAS782X_UTILS_H */ diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/mach-ox820.c b/target/linux/oxnas/files/arch/arm/mach-oxnas/mach-ox820.c new file mode 100644 index 0000000..4b247b6 --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/mach-ox820.c @@ -0,0 +1,284 @@ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/bug.h> +#include <linux/of_platform.h> +#include <linux/clocksource.h> +#include <linux/clk-provider.h> +#include <linux/clk.h> +#include <linux/stmmac.h> +#include <linux/slab.h> +#include <linux/gfp.h> +#include <linux/reset.h> +#include <asm/mach-types.h> +#include <asm/mach/map.h> +#include <asm/mach/arch.h> +#include <asm/page.h> +#include <mach/iomap.h> +#include <mach/hardware.h> +#include <mach/utils.h> +#include <mach/smp.h> + +static struct map_desc ox820_io_desc[] __initdata = { + { + .virtual = (unsigned long)OXNAS_PERCPU_BASE_VA, + .pfn = __phys_to_pfn(OXNAS_PERCPU_BASE), + .length = OXNAS_PERCPU_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = (unsigned long)OXNAS_SYSCRTL_BASE_VA, + .pfn = __phys_to_pfn(OXNAS_SYSCRTL_BASE), + .length = OXNAS_SYSCRTL_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = (unsigned long)OXNAS_SECCRTL_BASE_VA, + .pfn = __phys_to_pfn(OXNAS_SECCRTL_BASE), + .length = OXNAS_SECCRTL_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = (unsigned long)OXNAS_RPSA_BASE_VA, + .pfn = __phys_to_pfn(OXNAS_RPSA_BASE), + .length = OXNAS_RPSA_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = (unsigned long)OXNAS_RPSC_BASE_VA, + .pfn = __phys_to_pfn(OXNAS_RPSC_BASE), + .length = OXNAS_RPSC_SIZE, + .type = MT_DEVICE, + }, +}; + +void __init ox820_map_common_io(void) +{ + debug_ll_io_init(); + iotable_init(ox820_io_desc, ARRAY_SIZE(ox820_io_desc)); +} + +struct plat_gmac_data { + struct plat_stmmacenet_data stmmac; + struct clk *clk; +}; + +void *ox820_gmac_setup(struct platform_device *pdev) +{ + struct plat_gmac_data *pdata = pdev->dev.platform_data; + + pdata->clk = clk_get(&pdev->dev, "gmac"); + return (void *) pdata->clk; +}; + +int ox820_gmac_init(struct platform_device *pdev, void *priv) +{ + int ret; + unsigned value; + + ret = device_reset(&pdev->dev); + if (ret) + return ret; + + if (IS_ERR(priv)) + return PTR_ERR(priv); + clk_prepare_enable(priv); + + value = readl(SYS_CTRL_GMAC_CTRL); + + /* Enable GMII_GTXCLK to follow GMII_REFCLK, required for gigabit PHY */ + value |= BIT(SYS_CTRL_GMAC_CKEN_GTX); + /* Use simple mux for 25/125 Mhz clock switching */ + value |= BIT(SYS_CTRL_GMAC_SIMPLE_MUX); + /* set auto switch tx clock source */ + value |= BIT(SYS_CTRL_GMAC_AUTO_TX_SOURCE); + /* enable tx & rx vardelay */ + value |= BIT(SYS_CTRL_GMAC_CKEN_TX_OUT); + value |= BIT(SYS_CTRL_GMAC_CKEN_TXN_OUT); + value |= BIT(SYS_CTRL_GMAC_CKEN_TX_IN); + value |= BIT(SYS_CTRL_GMAC_CKEN_RX_OUT); + value |= BIT(SYS_CTRL_GMAC_CKEN_RXN_OUT); + value |= BIT(SYS_CTRL_GMAC_CKEN_RX_IN); + writel(value, SYS_CTRL_GMAC_CTRL); + + /* set tx & rx vardelay */ + value = 0; + value |= SYS_CTRL_GMAC_TX_VARDELAY(4); + value |= SYS_CTRL_GMAC_TXN_VARDELAY(2); + value |= SYS_CTRL_GMAC_RX_VARDELAY(10); + value |= SYS_CTRL_GMAC_RXN_VARDELAY(8); + writel(value, SYS_CTRL_GMAC_DELAY_CTRL); + + return 0; +} + +void ox820_gmac_exit(struct platform_device *pdev, void *priv) +{ + struct reset_control *rstc; + + clk_disable_unprepare(priv); + clk_put(priv); + + rstc = reset_control_get(&pdev->dev, NULL); + if (!IS_ERR(rstc)) { + reset_control_assert(rstc); + reset_control_put(rstc); + } +} + +static int __init ox820_ether_init(void) +{ + struct device_node *node; + struct platform_device *pdev; + struct plat_gmac_data *pdata; + + node = of_find_compatible_node(NULL, NULL, "plxtech,nas782x-gmac"); + if (!node) + return -ENOENT; + + pdev = of_find_device_by_node(node); + of_node_put(node); + + if (!pdev) + return -EINVAL; + + pdata = kzalloc(sizeof(struct plat_gmac_data), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + pdata->stmmac.setup = ox820_gmac_setup; + pdata->stmmac.init = ox820_gmac_init; + pdata->stmmac.exit = ox820_gmac_exit; + pdev->dev.platform_data = pdata; + + return 0; +} + +static void __init ox820_dt_init(void) +{ + int ret; + + ret = of_platform_populate(NULL, of_default_bus_match_table, NULL, + NULL); + + if (ret) { + pr_err("of_platform_populate failed: %d\n", ret); + BUG(); + } + + ret = ox820_ether_init(); + + if (ret) + pr_info("ox820_ether_init failed: %d\n", ret); +} + +static void __init ox820_timer_init(void) +{ + of_clk_init(NULL); + clocksource_of_init(); +} + +void ox820_init_early(void) +{ + +} + +void ox820_assert_system_reset(enum reboot_mode mode, const char *cmd) +{ + u32 value; + +/* Assert reset to cores as per power on defaults + * Don't touch the DDR interface as things will come to an impromptu stop + * NB Possibly should be asserting reset for PLLB, but there are timing + * concerns here according to the docs */ + value = BIT(SYS_CTRL_RST_COPRO) | + BIT(SYS_CTRL_RST_USBHS) | + BIT(SYS_CTRL_RST_USBHSPHYA) | + BIT(SYS_CTRL_RST_MACA) | + BIT(SYS_CTRL_RST_PCIEA) | + BIT(SYS_CTRL_RST_SGDMA) | + BIT(SYS_CTRL_RST_CIPHER) | + BIT(SYS_CTRL_RST_SATA) | + BIT(SYS_CTRL_RST_SATA_LINK) | + BIT(SYS_CTRL_RST_SATA_PHY) | + BIT(SYS_CTRL_RST_PCIEPHY) | + BIT(SYS_CTRL_RST_STATIC) | + BIT(SYS_CTRL_RST_UART1) | + BIT(SYS_CTRL_RST_UART2) | + BIT(SYS_CTRL_RST_MISC) | + BIT(SYS_CTRL_RST_I2S) | + BIT(SYS_CTRL_RST_SD) | + BIT(SYS_CTRL_RST_MACB) | + BIT(SYS_CTRL_RST_PCIEB) | + BIT(SYS_CTRL_RST_VIDEO) | + BIT(SYS_CTRL_RST_USBHSPHYB) | + BIT(SYS_CTRL_RST_USBDEV); + + writel(value, SYS_CTRL_RST_SET_CTRL); + + /* Release reset to cores as per power on defaults */ + writel(BIT(SYS_CTRL_RST_GPIO), SYS_CTRL_RST_CLR_CTRL); + + /* Disable clocks to cores as per power-on defaults - must leave DDR + * related clocks enabled otherwise we'll stop rather abruptly. */ + value = + BIT(SYS_CTRL_CLK_COPRO) | + BIT(SYS_CTRL_CLK_DMA) | + BIT(SYS_CTRL_CLK_CIPHER) | + BIT(SYS_CTRL_CLK_SD) | + BIT(SYS_CTRL_CLK_SATA) | + BIT(SYS_CTRL_CLK_I2S) | + BIT(SYS_CTRL_CLK_USBHS) | + BIT(SYS_CTRL_CLK_MAC) | + BIT(SYS_CTRL_CLK_PCIEA) | + BIT(SYS_CTRL_CLK_STATIC) | + BIT(SYS_CTRL_CLK_MACB) | + BIT(SYS_CTRL_CLK_PCIEB) | + BIT(SYS_CTRL_CLK_REF600) | + BIT(SYS_CTRL_CLK_USBDEV); + + writel(value, SYS_CTRL_CLK_CLR_CTRL); + + /* Enable clocks to cores as per power-on defaults */ + + /* Set sys-control pin mux'ing as per power-on defaults */ + writel(0, SYS_CTRL_SECONDARY_SEL); + writel(0, SYS_CTRL_TERTIARY_SEL); + writel(0, SYS_CTRL_QUATERNARY_SEL); + writel(0, SYS_CTRL_DEBUG_SEL); + writel(0, SYS_CTRL_ALTERNATIVE_SEL); + writel(0, SYS_CTRL_PULLUP_SEL); + + writel(0, SYS_CTRL_SECONDARY_SEL); + writel(0, SYS_CTRL_TERTIARY_SEL); + writel(0, SYS_CTRL_QUATERNARY_SEL); + writel(0, SYS_CTRL_DEBUG_SEL); + writel(0, SYS_CTRL_ALTERNATIVE_SEL); + writel(0, SYS_CTRL_PULLUP_SEL); + + /* No need to save any state, as the ROM loader can determine whether + * reset is due to power cycling or programatic action, just hit the + * (self-clearing) CPU reset bit of the block reset register */ + value = + BIT(SYS_CTRL_RST_SCU) | + BIT(SYS_CTRL_RST_ARM0) | + BIT(SYS_CTRL_RST_ARM1); + + writel(value, SYS_CTRL_RST_SET_CTRL); +} + +static const char * const ox820_dt_board_compat[] = { + "plxtech,nas7820", + "plxtech,nas7821", + "plxtech,nas7825", + NULL +}; + +DT_MACHINE_START(OX820_DT, "PLXTECH NAS782X SoC (Flattened Device Tree)") + .map_io = ox820_map_common_io, + .smp = smp_ops(ox820_smp_ops), + .init_early = ox820_init_early, + .init_time = ox820_timer_init, + .init_machine = ox820_dt_init, + .restart = ox820_assert_system_reset, + .dt_compat = ox820_dt_board_compat, +MACHINE_END diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/platsmp.c b/target/linux/oxnas/files/arch/arm/mach-oxnas/platsmp.c new file mode 100644 index 0000000..c41a3d1 --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/platsmp.c @@ -0,0 +1,315 @@ +/* + * arch/arm/mach-ox820/platsmp.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/device.h> +#include <linux/jiffies.h> +#include <linux/smp.h> +#include <linux/io.h> +#include <linux/dma-mapping.h> +#include <linux/cache.h> +#include <asm/cacheflush.h> +#include <asm/smp_scu.h> +#include <asm/tlbflush.h> +#include <asm/cputype.h> +#include <linux/delay.h> +#include <asm/fiq.h> + +#include <linux/irqchip/arm-gic.h> +#include <mach/iomap.h> +#include <mach/smp.h> +#include <mach/hardware.h> +#include <mach/irqs.h> + +#ifdef CONFIG_DMA_CACHE_FIQ_BROADCAST + +#define FIQ_GENERATE 0x00000002 +#define OXNAS_MAP_AREA 0x01000000 +#define OXNAS_UNMAP_AREA 0x02000000 +#define OXNAS_FLUSH_RANGE 0x03000000 + +struct fiq_req { + union { + struct { + const void *addr; + size_t size; + } map; + struct { + const void *addr; + size_t size; + } unmap; + struct { + const void *start; + const void *end; + } flush; + }; + volatile uint flags; + void __iomem *reg; +} ____cacheline_aligned; + +static struct fiq_handler fh = { + .name = "oxnas-fiq" +}; + +DEFINE_PER_CPU(struct fiq_req, fiq_data); + +static inline void __cpuinit ox820_set_fiq_regs(unsigned int cpu) +{ + struct pt_regs FIQ_regs; + struct fiq_req *fiq_req = &per_cpu(fiq_data, !cpu); + + FIQ_regs.ARM_r8 = 0; + FIQ_regs.ARM_ip = (unsigned int)fiq_req; + FIQ_regs.ARM_sp = (int)(cpu ? RPSC_IRQ_SOFT : RPSA_IRQ_SOFT); + fiq_req->reg = cpu ? RPSC_IRQ_SOFT : RPSA_IRQ_SOFT; + + set_fiq_regs(&FIQ_regs); +} + +static void __init ox820_init_fiq(void) +{ + void *fiqhandler_start; + unsigned int fiqhandler_length; + int ret; + + fiqhandler_start = &ox820_fiq_start; + fiqhandler_length = &ox820_fiq_end - &ox820_fiq_start; + + ret = claim_fiq(&fh); + + if (ret) + return; + + set_fiq_handler(fiqhandler_start, fiqhandler_length); + + writel(IRQ_SOFT, RPSA_FIQ_IRQ_TO_FIQ); + writel(1, RPSA_FIQ_ENABLE); + writel(IRQ_SOFT, RPSC_FIQ_IRQ_TO_FIQ); + writel(1, RPSC_FIQ_ENABLE); +} + +void fiq_dma_map_area(const void *addr, size_t size, int dir) +{ + unsigned long flags; + struct fiq_req *req; + + raw_local_irq_save(flags); + /* currently, not possible to take cpu0 down, so only check cpu1 */ + if (!cpu_online(1)) { + raw_local_irq_restore(flags); + v6_dma_map_area(addr, size, dir); + return; + } + + req = this_cpu_ptr(&fiq_data); + req->map.addr = addr; + req->map.size = size; + req->flags = dir | OXNAS_MAP_AREA; + smp_mb(); + + writel_relaxed(FIQ_GENERATE, req->reg); + + v6_dma_map_area(addr, size, dir); + while (req->flags) + barrier(); + + raw_local_irq_restore(flags); +} + +void fiq_dma_unmap_area(const void *addr, size_t size, int dir) +{ + unsigned long flags; + struct fiq_req *req; + + raw_local_irq_save(flags); + /* currently, not possible to take cpu0 down, so only check cpu1 */ + if (!cpu_online(1)) { + raw_local_irq_restore(flags); + v6_dma_unmap_area(addr, size, dir); + return; + } + + req = this_cpu_ptr(&fiq_data); + req->unmap.addr = addr; + req->unmap.size = size; + req->flags = dir | OXNAS_UNMAP_AREA; + smp_mb(); + + writel_relaxed(FIQ_GENERATE, req->reg); + + v6_dma_unmap_area(addr, size, dir); + while (req->flags) + barrier(); + + raw_local_irq_restore(flags); +} + +void fiq_dma_flush_range(const void *start, const void *end) +{ + unsigned long flags; + struct fiq_req *req; + + raw_local_irq_save(flags); + /* currently, not possible to take cpu0 down, so only check cpu1 */ + if (!cpu_online(1)) { + raw_local_irq_restore(flags); + v6_dma_flush_range(start, end); + return; + } + + req = this_cpu_ptr(&fiq_data); + + req->flush.start = start; + req->flush.end = end; + req->flags = OXNAS_FLUSH_RANGE; + smp_mb(); + + writel_relaxed(FIQ_GENERATE, req->reg); + + v6_dma_flush_range(start, end); + + while (req->flags) + barrier(); + + raw_local_irq_restore(flags); +} + +void fiq_flush_kern_dcache_area(void *addr, size_t size) +{ + fiq_dma_flush_range(addr, addr + size); +} +#else + +#define ox820_set_fiq_regs(cpu) do {} while (0) /* nothing */ +#define ox820_init_fiq() do {} while (0) /* nothing */ + +#endif /* DMA_CACHE_FIQ_BROADCAST */ + +static DEFINE_SPINLOCK(boot_lock); + +void __cpuinit ox820_secondary_init(unsigned int cpu) +{ + /* + * Setup Secondary Core FIQ regs + */ + ox820_set_fiq_regs(1); + + /* + * let the primary processor know we're out of the + * pen, then head off into the C entry point + */ + write_pen_release(-1); + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +int __cpuinit ox820_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + + /* + * Set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * This is really belt and braces; we hold unintended secondary + * CPUs in the holding pen until we're ready for them. However, + * since we haven't sent them a soft interrupt, they shouldn't + * be there. + */ + write_pen_release(cpu); + + writel(1, IOMEM(OXNAS_GICN_BASE_VA(cpu) + GIC_CPU_CTRL)); + + /* + * Send the secondary CPU a soft interrupt, thereby causing + * the boot monitor to read the system wide flags register, + * and branch to the address found there. + */ + + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) { + smp_rmb(); + if (read_pen_release() == -1) + break; + + udelay(10); + } + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return read_pen_release() != -1 ? -ENOSYS : 0; +} + +void *scu_base_addr(void) +{ + return IOMEM(OXNAS_SCU_BASE_VA); +} + +/* + * Initialise the CPU possible map early - this describes the CPUs + * which may be present or become present in the system. + */ +static void __init ox820_smp_init_cpus(void) +{ + void __iomem *scu_base = scu_base_addr(); + unsigned int i, ncores; + + ncores = scu_base ? scu_get_core_count(scu_base) : 1; + + /* sanity check */ + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; + } + + for (i = 0; i < ncores; i++) + set_cpu_possible(i, true); +} + +static void __init ox820_smp_prepare_cpus(unsigned int max_cpus) +{ + + scu_enable(scu_base_addr()); + + /* + * Write the address of secondary startup into the + * system-wide flags register. The BootMonitor waits + * until it receives a soft interrupt, and then the + * secondary CPU branches to this address. + */ + writel(virt_to_phys(ox820_secondary_startup), + HOLDINGPEN_LOCATION); + ox820_init_fiq(); + + ox820_set_fiq_regs(0); +} + +struct smp_operations ox820_smp_ops __initdata = { + .smp_init_cpus = ox820_smp_init_cpus, + .smp_prepare_cpus = ox820_smp_prepare_cpus, + .smp_secondary_init = ox820_secondary_init, + .smp_boot_secondary = ox820_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = ox820_cpu_die, +#endif +}; diff --git a/target/linux/oxnas/files/drivers/ata/sata_oxnas.c b/target/linux/oxnas/files/drivers/ata/sata_oxnas.c new file mode 100644 index 0000000..b3685bd --- /dev/null +++ b/target/linux/oxnas/files/drivers/ata/sata_oxnas.c @@ -0,0 +1,1889 @@ +#include <linux/ata.h> +#include <linux/libata.h> +#include <linux/of_platform.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/clk.h> +#include <linux/reset.h> + +#include <mach/utils.h> + +/* sgdma request structure */ +struct sgdma_request { + volatile u32 qualifier; + volatile u32 control; + dma_addr_t src_pa; + dma_addr_t dst_pa; +} __packed __aligned(4); + + +/* Controller information */ +enum { + SATA_OXNAS_MAX_PRD = 254, + SATA_OXNAS_DMA_SIZE = SATA_OXNAS_MAX_PRD * + sizeof(struct ata_bmdma_prd) + + sizeof(struct sgdma_request), + SATA_OXNAS_MAX_PORTS = 1, + /** The different Oxsemi SATA core version numbers */ + SATA_OXNAS_CORE_VERSION = 0x1f3, + SATA_OXNAS_IRQ_FLAG = IRQF_SHARED, + SATA_OXNAS_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_PIO_DMA | + ATA_FLAG_NO_ATAPI /*| ATA_FLAG_NCQ*/), + SATA_OXNAS_QUEUE_DEPTH = 32, + + SATA_OXNAS_DMA_BOUNDARY = 0xFFFFFFFF, +}; + + +/* + * SATA Port Registers + */ +enum { + /** sata host port register offsets */ + ORB1 = 0x00, + ORB2 = 0x04, + ORB3 = 0x08, + ORB4 = 0x0C, + ORB5 = 0x10, + MASTER_STATUS = 0x10, + FIS_CTRL = 0x18, + FIS_DATA = 0x1C, + INT_STATUS = 0x30, + INT_CLEAR = 0x30, + INT_ENABLE = 0x34, + INT_DISABLE = 0x38, + VERSION = 0x3C, + SATA_CONTROL = 0x5C, + SATA_COMMAND = 0x60, + HID_FEATURES = 0x64, + PORT_CONTROL = 0x68, + DRIVE_CONTROL = 0x6C, + /** These registers allow access to the link layer registers + that reside in a different clock domain to the processor bus */ + LINK_DATA = 0x70, + LINK_RD_ADDR = 0x74, + LINK_WR_ADDR = 0x78, + LINK_CONTROL = 0x7C, + /* window control */ + WIN1LO = 0x80, + WIN1HI = 0x84, + WIN2LO = 0x88, + WIN2HI = 0x8C, + WIN0_CONTROL = 0x90, + +}; + +/** sata port register bits */ +enum{ + /** + * commands to issue in the master status to tell it to move shadow , + * registers to the actual device , + */ + SATA_OPCODE_MASK = 0x00000007, + CMD_WRITE_TO_ORB_REGS_NO_COMMAND = 0x4, + CMD_WRITE_TO_ORB_REGS = 0x2, + CMD_SYNC_ESCAPE = 0x7, + CMD_CORE_BUSY = (1 << 7), + CMD_DRIVE_SELECT_SHIFT = 12, + CMD_DRIVE_SELECT_MASK = (0xf << CMD_DRIVE_SELECT_SHIFT), + + /** interrupt bits */ + INT_END_OF_CMD = 1 << 0, + INT_LINK_SERROR = 1 << 1, + INT_ERROR = 1 << 2, + INT_LINK_IRQ = 1 << 3, + INT_REG_ACCESS_ERR = 1 << 7, + INT_BIST_FIS = 1 << 11, + INT_MASKABLE = INT_END_OF_CMD | + INT_LINK_SERROR | + INT_ERROR | + INT_LINK_IRQ | + INT_REG_ACCESS_ERR | + INT_BIST_FIS, + INT_WANT = INT_END_OF_CMD | + INT_LINK_SERROR | + INT_REG_ACCESS_ERR | + INT_ERROR, + INT_ERRORS = INT_LINK_SERROR | + INT_REG_ACCESS_ERR | + INT_ERROR, + + /** raw interrupt bits, unmaskable, but do not generate interrupts */ + RAW_END_OF_CMD = INT_END_OF_CMD << 16, + RAW_LINK_SERROR = INT_LINK_SERROR << 16, + RAW_ERROR = INT_ERROR << 16, + RAW_LINK_IRQ = INT_LINK_IRQ << 16, + RAW_REG_ACCESS_ERR = INT_REG_ACCESS_ERR << 16, + RAW_BIST_FIS = INT_BIST_FIS << 16, + RAW_WANT = INT_WANT << 16, + RAW_ERRORS = INT_ERRORS << 16, + + /** + * variables to write to the device control register to set the current + * device, ie. master or slave. + */ + DR_CON_48 = 2, + DR_CON_28 = 0, + + SATA_CTL_ERR_MASK = 0x00000016, + +}; + +/* ATA SGDMA register offsets */ +enum { + SGDMA_CONTROL = 0x0, + SGDMA_STATUS = 0x4, + SGDMA_REQUESTPTR = 0x8, + SGDMA_RESETS = 0xC, + SGDMA_CORESIZE = 0x10, +}; + +enum { + /* see DMA core docs for the values. Out means from memory (bus A) out + * to disk (bus B) */ + SGDMA_REQCTL0OUT = 0x0497c03d, + /* burst mode disabled when no micro code used */ + SGDMA_REQCTL0IN = 0x0493a3c1, + SGDMA_REQCTL1OUT = 0x0497c07d, + SGDMA_REQCTL1IN = 0x0497a3c5, + SGDMA_CONTROL_NOGO = 0x3e, + SGDMA_CONTROL_GO = SGDMA_CONTROL_NOGO | 1, + SGDMA_ERRORMASK = 0x3f, + SGDMA_BUSY = 0x80, + + SGDMA_RESETS_CTRL = 1 << 0, + SGDMA_RESETS_ARBT = 1 << 1, + SGDMA_RESETS_AHB = 1 << 2, + SGDMA_RESETS_ALL = SGDMA_RESETS_CTRL | + SGDMA_RESETS_ARBT | + SGDMA_RESETS_AHB, + + /* Final EOTs */ + SGDMA_REQQUAL = 0x00220001, + +}; + +/** SATA core register offsets */ +enum { + DM_DBG1 = 0x000, + RAID_SET = 0x004, + DM_DBG2 = 0x008, + DATACOUNT_PORT0 = 0x010, + DATACOUNT_PORT1 = 0x014, + CORE_INT_STATUS = 0x030, + CORE_INT_CLEAR = 0x030, + CORE_INT_ENABLE = 0x034, + CORE_INT_DISABLE = 0x038, + CORE_REBUILD_ENABLE = 0x050, + CORE_FAILED_PORT_R = 0x054, + DEVICE_CONTROL = 0x068, + EXCESS = 0x06C, + RAID_SIZE_LOW = 0x070, + RAID_SIZE_HIGH = 0x074, + PORT_ERROR_MASK = 0x078, + IDLE_STATUS = 0x07C, + RAID_CONTROL = 0x090, + DATA_PLANE_CTRL = 0x0AC, + CORE_DATAPLANE_STAT = 0x0b8, + PROC_PC = 0x100, + CONFIG_IN = 0x3d8, + PROC_START = 0x3f0, + PROC_RESET = 0x3f4, + UCODE_STORE = 0x1000, + RAID_WP_BOT_LOW = 0x1FF0, + RAID_WP_BOT_HIGH = 0x1FF4, + RAID_WP_TOP_LOW = 0x1FF8, + RAID_WP_TOP_HIGH = 0x1FFC, + DATA_MUX_RAM0 = 0x8000, + DATA_MUX_RAM1 = 0xA000, +}; + +enum { + /* Sata core debug1 register bits */ + CORE_PORT0_DATA_DIR_BIT = 20, + CORE_PORT1_DATA_DIR_BIT = 21, + CORE_PORT0_DATA_DIR = 1 << CORE_PORT0_DATA_DIR_BIT, + CORE_PORT1_DATA_DIR = 1 << CORE_PORT1_DATA_DIR_BIT, + + /** sata core control register bits */ + SCTL_CLR_ERR = 0x00003016, + RAID_CLR_ERR = 0x0000011e, + + /* Interrupts direct from the ports */ + NORMAL_INTS_WANTED = 0x00000303, + + /* shift these left by port number */ + COREINT_HOST = 0x00000001, + COREINT_END = 0x00000100, + CORERAW_HOST = COREINT_HOST << 16, + CORERAW_END = COREINT_END << 16, + + /* Interrupts from the RAID controller only */ + RAID_INTS_WANTED = 0x00008300, + + /* The bits in the IDLE_STATUS that, when set indicate an idle core */ + IDLE_CORES = (1 << 18) | (1 << 19), + + /* Data plane control error-mask mask and bit, these bit in the data + * plane control mask out errors from the ports that prevent the SGDMA + * care from sending an interrupt */ + DPC_ERROR_MASK = 0x00000300, + DPC_ERROR_MASK_BIT = 0x00000100, + /* enable jbod micro-code */ + DPC_JBOD_UCODE = 1 << 0, + DPC_FIS_SWCH = 1 << 1, + + /** Device Control register bits */ + DEVICE_CONTROL_DMABT = 1 << 4, + DEVICE_CONTROL_ABORT = 1 << 2, + DEVICE_CONTROL_PAD = 1 << 3, + DEVICE_CONTROL_PADPAT = 1 << 16, + DEVICE_CONTROL_PRTRST = 1 << 8, + DEVICE_CONTROL_RAMRST = 1 << 12, + DEVICE_CONTROL_ATA_ERR_OVERRIDE = 1 << 28, + + /** oxsemi HW raid modes */ + OXNASSATA_NOTRAID = 0, + OXNASSATA_RAID0 = 1, + OXNASSATA_RAID1 = 2, + /** OX820 specific HW-RAID register values */ + RAID_TWODISKS = 3, + UNKNOWN_MODE = ~0, +}; + +/* SATA PHY Registers */ +enum { + PHY_STAT = 0x00, + PHY_DATA = 0x04, +}; + +enum { + STAT_READ_VALID = (1 << 21), + STAT_CR_ACK = (1 << 20), + STAT_CR_READ = (1 << 19), + STAT_CR_WRITE = (1 << 18), + STAT_CAP_DATA = (1 << 17), + STAT_CAP_ADDR = (1 << 16), + + STAT_ACK_ANY = STAT_CR_ACK | + STAT_CR_READ | + STAT_CR_WRITE | + STAT_CAP_DATA | + STAT_CAP_ADDR, + + CR_READ_ENABLE = (1 << 16), + CR_WRITE_ENABLE = (1 << 17), + CR_CAP_DATA = (1 << 18), +}; + +enum { + /* Link layer registers */ + SERROR_IRQ_MASK = 5, +}; + +enum { + OXNAS_SATA_SOFTRESET = 1, + OXNAS_SATA_REINIT = 2, +}; + +enum { + OXNAS_SATA_UCODE_RAID0, + OXNAS_SATA_UCODE_RAID1, + OXNAS_SATA_UCODE_JBOD, + OXNAS_SATA_UCODE_NONE, +}; + +struct sata_oxnas_host_priv { + void __iomem *port_base[SATA_OXNAS_MAX_PORTS]; + void __iomem *sgdma_base[SATA_OXNAS_MAX_PORTS]; + void __iomem *core_base; + void __iomem *phy_base; + dma_addr_t dma_base; + void __iomem *dma_base_va; + size_t dma_size; + int irq; + u32 port_in_eh; + struct clk *clk; + struct reset_control *rst_sata; + struct reset_control *rst_link; + struct reset_control *rst_phy; +}; + + +struct sata_oxnas_port_priv { + void __iomem *port_base; + void __iomem *sgdma_base; + void __iomem *core_base; + struct sgdma_request *sgdma_request; + dma_addr_t sgdma_request_pa; +}; + +static u8 sata_oxnas_check_status(struct ata_port *ap); +static int sata_oxnas_cleanup(struct ata_host *ah); +static void sata_oxnas_tf_load(struct ata_port *ap, + const struct ata_taskfile *tf); +static void sata_oxnas_irq_on(struct ata_port *ap); +static void sata_oxnas_post_reset_init(struct ata_port *ap); + +/* ??????????????????????????????????? */ +static void wait_cr_ack(void __iomem *phy_base) +{ + while ((ioread32(phy_base + PHY_STAT) >> 16) & 0x1f) + ; /* wait for an ack bit to be set */ +} + +static u16 read_cr(void __iomem *phy_base, u16 address) +{ + iowrite32((u32)address, phy_base + PHY_STAT); + wait_cr_ack(phy_base); + iowrite32(CR_READ_ENABLE, phy_base + PHY_DATA); + wait_cr_ack(phy_base); + return (u16)ioread32(phy_base + PHY_STAT); +} + +static void write_cr(void __iomem *phy_base, u16 data, u16 address) +{ + iowrite32((u32)address, phy_base + PHY_STAT); + wait_cr_ack(phy_base); + iowrite32((data | CR_CAP_DATA), phy_base + PHY_DATA); + wait_cr_ack(phy_base); + iowrite32(CR_WRITE_ENABLE, phy_base + PHY_DATA); + wait_cr_ack(phy_base); +} + +#define PH_GAIN 2 +#define FR_GAIN 3 +#define PH_GAIN_OFFSET 6 +#define FR_GAIN_OFFSET 8 +#define PH_GAIN_MASK (0x3 << PH_GAIN_OFFSET) +#define FR_GAIN_MASK (0x3 << FR_GAIN_OFFSET) +#define USE_INT_SETTING (1<<5) + +void workaround5458(struct ata_host *ah) +{ + struct sata_oxnas_host_priv *hd = ah->private_data; + void __iomem *phy_base = hd->phy_base; + u16 rx_control; + unsigned i; + + for (i = 0; i < 2; i++) { + rx_control = read_cr(phy_base, 0x201d + (i << 8)); + rx_control &= ~(PH_GAIN_MASK | FR_GAIN_MASK); + rx_control |= PH_GAIN << PH_GAIN_OFFSET; + rx_control |= (FR_GAIN << FR_GAIN_OFFSET) | USE_INT_SETTING; + write_cr(phy_base, rx_control, 0x201d+(i<<8)); + } +} + +/** + * allows access to the link layer registers + * @param link_reg the link layer register to access (oxsemi indexing ie + * 00 = static config, 04 = phy ctrl) + */ +void sata_oxnas_link_write(struct ata_port *ap, unsigned int link_reg, u32 val) +{ + struct sata_oxnas_port_priv *port_priv = ap->private_data; + void __iomem *port_base = port_priv->port_base; + u32 patience; + + DPRINTK("[0x%02x]->0x%08x\n", link_reg, val); + + iowrite32(val, port_base + LINK_DATA); + + /* accessed twice as a work around for a bug in the SATA abp bridge + * hardware (bug 6828) */ + iowrite32(link_reg , port_base + LINK_WR_ADDR); + ioread32(port_base + LINK_WR_ADDR); + + for (patience = 0x100000; patience > 0; --patience) { + if (ioread32(port_base + LINK_CONTROL) & 0x00000001) + break; + } +} + +static int sata_oxnas_scr_write_port(struct ata_port *ap, unsigned int sc_reg, + u32 val) +{ + sata_oxnas_link_write(ap, 0x20 + (sc_reg * 4), val); + return 0; +} + +static int sata_oxnas_scr_write(struct ata_link *link, unsigned int sc_reg, + u32 val) +{ + return sata_oxnas_scr_write_port(link->ap, sc_reg, val); +} + +/* FIXME lock */ +u32 sata_oxnas_link_read(struct ata_port *ap, unsigned int link_reg) +{ + struct sata_oxnas_port_priv *pd = ap->private_data; + void __iomem *port_base = pd->port_base; + u32 result; + u32 patience; + + /* accessed twice as a work around for a bug in the SATA abp bridge + * hardware (bug 6828) */ + iowrite32(link_reg, port_base + LINK_RD_ADDR); + ioread32(port_base + LINK_RD_ADDR); + + for (patience = 0x100000; patience > 0; --patience) { + if (ioread32(port_base + LINK_CONTROL) & 0x00000001) + break; + } + if (patience == 0) + DPRINTK("link read timed out\n"); + + result = readl(port_base + LINK_DATA); + + return result; +} + +static int sata_oxnas_scr_read_port(struct ata_port *ap, unsigned int sc_reg, + u32 *val) +{ + *val = sata_oxnas_link_read(ap, 0x20 + (sc_reg*4)); + return 0; +} + +static int sata_oxnas_scr_read(struct ata_link *link, + unsigned int sc_reg, u32 *val) +{ + + return sata_oxnas_scr_read_port(link->ap, sc_reg, val); +} + +/** + * sata_oxnas_irq_clear is called during probe just before the interrupt handler is + * registered, to be sure hardware is quiet. It clears and masks interrupt bits + * in the SATA core. + * + * @param ap hardware with the registers in + */ +static void sata_oxnas_irq_clear(struct ata_port *ap) +{ + struct sata_oxnas_port_priv *port_priv = ap->private_data; + + /* clear pending interrupts */ + iowrite32(~0, port_priv->port_base + INT_CLEAR); + iowrite32(COREINT_END, port_priv->core_base + CORE_INT_CLEAR); +} + +/** + * qc_issue is used to make a command active, once the hardware and S/G tables + * have been prepared. IDE BMDMA drivers use the helper function + * ata_qc_issue_prot() for taskfile protocol-based dispatch. More advanced + * drivers roll their own ->qc_issue implementation, using this as the + * "issue new ATA command to hardware" hook. + * @param qc the queued command to issue + */ +static unsigned int sata_oxnas_qc_issue(struct ata_queued_cmd *qc) +{ + struct sata_oxnas_port_priv *pd = qc->ap->private_data; + void __iomem *port_base = pd->port_base; + void __iomem *core_base = pd->core_base; + int port_no = qc->ap->port_no; + u32 reg; + + /* check the core is idle */ + if (ioread32(port_base + SATA_COMMAND) & CMD_CORE_BUSY) { + int count = 0; + + DPRINTK("core busy for a command on port %d\n", + qc->ap->port_no); + do { + mdelay(1); + if (++count > 100) { + DPRINTK("core busy for a command on port %d\n", + qc->ap->port_no); + /* CrazyDumpDebug(); */ + sata_oxnas_cleanup(qc->ap->host); + } + } while (ioread32(port_base + SATA_COMMAND) & CMD_CORE_BUSY); + } + + /* enable passing of error signals to DMA sub-core by clearing the + * appropriate bit (all transfers are on dma channel 0) */ + reg = ioread32(core_base + DATA_PLANE_CTRL); + reg &= ~(DPC_ERROR_MASK_BIT << port_no); + iowrite32(reg, core_base + DATA_PLANE_CTRL); + + /* Disable all interrupts for ports and RAID controller */ + iowrite32(~0, port_base + INT_DISABLE); + + /* Disable all interrupts for core */ + iowrite32(~0, core_base + CORE_INT_DISABLE); + wmb(); + + /* Load the command settings into the orb registers */ + sata_oxnas_tf_load(qc->ap, &qc->tf); + + /* both pio and dma commands use dma */ + if (ata_is_dma(qc->tf.protocol) || ata_is_pio(qc->tf.protocol)) { + /* Start the DMA */ + iowrite32(SGDMA_CONTROL_GO, pd->sgdma_base + SGDMA_CONTROL); + wmb(); + } + + /* enable End of command interrupt */ + iowrite32(INT_WANT, port_base + INT_ENABLE); + iowrite32(COREINT_END, core_base + CORE_INT_ENABLE); + wmb(); + + /* Start the command */ + reg = ioread32(port_base + SATA_COMMAND); + reg &= ~SATA_OPCODE_MASK; + reg |= CMD_WRITE_TO_ORB_REGS; + iowrite32(reg , port_base + SATA_COMMAND); + wmb(); + + return 0; +} + +/** + * Will schedule the libATA error handler on the premise that there has + * been a hotplug event on the port specified + */ +void sata_oxnas_checkforhotplug(struct ata_port *ap) +{ + DPRINTK("ENTER\n"); + + ata_ehi_hotplugged(&ap->link.eh_info); + ata_port_freeze(ap); +} + + +static inline int sata_oxnas_is_host_frozen(struct ata_host *ah) +{ + struct sata_oxnas_host_priv *hd = ah->private_data; + + smp_rmb(); + return hd->port_in_eh; +} + +static inline u32 sata_oxnas_hostportbusy(struct ata_port *ap) +{ + struct sata_oxnas_port_priv *pd = ap->private_data; + + return ioread32(pd->port_base + SATA_COMMAND) & CMD_CORE_BUSY; +} + +static inline u32 sata_oxnas_hostdmabusy(struct ata_port *ap) +{ + struct sata_oxnas_port_priv *pd = ap->private_data; + + return ioread32(pd->sgdma_base + SGDMA_STATUS) & SGDMA_BUSY; +} + + +/** + * Turns on the cores clock and resets it + */ +static void sata_oxnas_reset_core(struct ata_host *ah) +{ + struct sata_oxnas_host_priv *host_priv = ah->private_data; + + DPRINTK("ENTER\n"); + clk_prepare_enable(host_priv->clk); + + reset_control_assert(host_priv->rst_sata); + reset_control_assert(host_priv->rst_link); + reset_control_assert(host_priv->rst_phy); + + udelay(50); + + /* un-reset the PHY, then Link and Controller */ + reset_control_deassert(host_priv->rst_phy); + udelay(50); + + reset_control_deassert(host_priv->rst_sata); + reset_control_deassert(host_priv->rst_link); + udelay(50); + + workaround5458(ah); + /* tune for sata compatability */ + sata_oxnas_link_write(ah->ports[0], 0x60, 0x2988); + + /* each port in turn */ + sata_oxnas_link_write(ah->ports[0], 0x70, 0x55629); + udelay(50); +} + + +/** + * Called after an identify device command has worked out what kind of device + * is on the port + * + * @param port The port to configure + * @param pdev The hardware associated with controlling the port + */ +static void sata_oxnas_dev_config(struct ata_device *pdev) +{ + struct sata_oxnas_port_priv *pd = pdev->link->ap->private_data; + void __iomem *port_base = pd->port_base; + u32 reg; + + DPRINTK("ENTER\n"); + /* Set the bits to put the port into 28 or 48-bit node */ + reg = ioread32(port_base + DRIVE_CONTROL); + reg &= ~3; + reg |= (pdev->flags & ATA_DFLAG_LBA48) ? DR_CON_48 : DR_CON_28; + iowrite32(reg, port_base + DRIVE_CONTROL); + + /* if this is an ATA-6 disk, put port into ATA-5 auto translate mode */ + if (pdev->flags & ATA_DFLAG_LBA48) { + reg = ioread32(port_base + PORT_CONTROL); + reg |= 2; + iowrite32(reg, port_base + PORT_CONTROL); + } +} +/** + * called to write a taskfile into the ORB registers + * @param ap hardware with the registers in + * @param tf taskfile to write to the registers + */ +static void sata_oxnas_tf_load(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + u32 count = 0; + u32 Orb1 = 0; + u32 Orb2 = 0; + u32 Orb3 = 0; + u32 Orb4 = 0; + u32 Command_Reg; + + struct sata_oxnas_port_priv *port_priv = ap->private_data; + void __iomem *port_base = port_priv->port_base; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + /* wait a maximum of 10ms for the core to be idle */ + do { + Command_Reg = ioread32(port_base + SATA_COMMAND); + if (!(Command_Reg & CMD_CORE_BUSY)) + break; + count++; + udelay(50); + } while (count < 200); + + /* check if the ctl register has interrupts disabled or enabled and + * modify the interrupt enable registers on the ata core as required */ + if (tf->ctl & ATA_NIEN) { + /* interrupts disabled */ + u32 mask = (COREINT_END << ap->port_no); + + iowrite32(mask, port_priv->core_base + CORE_INT_DISABLE); + sata_oxnas_irq_clear(ap); + } else { + sata_oxnas_irq_on(ap); + } + + Orb2 |= (tf->command) << 24; + + /* write 48 or 28 bit tf parameters */ + if (is_addr) { + /* set LBA bit as it's an address */ + Orb1 |= (tf->device & ATA_LBA) << 24; + + if (tf->flags & ATA_TFLAG_LBA48) { + Orb1 |= ATA_LBA << 24; + Orb2 |= (tf->hob_nsect) << 8; + Orb3 |= (tf->hob_lbal) << 24; + Orb4 |= (tf->hob_lbam) << 0; + Orb4 |= (tf->hob_lbah) << 8; + Orb4 |= (tf->hob_feature) << 16; + } else { + Orb3 |= (tf->device & 0xf) << 24; + } + + /* write 28-bit lba */ + Orb2 |= (tf->nsect) << 0; + Orb2 |= (tf->feature) << 16; + Orb3 |= (tf->lbal) << 0; + Orb3 |= (tf->lbam) << 8; + Orb3 |= (tf->lbah) << 16; + Orb4 |= (tf->ctl) << 24; + } + + if (tf->flags & ATA_TFLAG_DEVICE) + Orb1 |= (tf->device) << 24; + + ap->last_ctl = tf->ctl; + + /* write values to registers */ + iowrite32(Orb1, port_base + ORB1); + iowrite32(Orb2, port_base + ORB2); + iowrite32(Orb3, port_base + ORB3); + iowrite32(Orb4, port_base + ORB4); +} + + +void sata_oxnas_set_mode(struct ata_port *ap, u32 mode, u32 force) +{ + struct sata_oxnas_port_priv *port_priv = ap->private_data; + void __iomem *core_base = port_priv->core_base; + + unsigned int *src; + void __iomem *dst; + unsigned int progmicrocode = 0; + unsigned int changeparameters = 0; + static u32 previous_mode = UNKNOWN_MODE; + + /* these micro-code programs _should_ include the version word */ + + /* JBOD */ + static const unsigned int jbod[] = { + 0x07B400AC, 0x0228A280, 0x00200001, 0x00204002, 0x00224001, + 0x00EE0009, 0x00724901, 0x01A24903, 0x00E40009, 0x00224001, + 0x00621120, 0x0183C908, 0x00E20005, 0x00718908, 0x0198A206, + 0x00621124, 0x0183C908, 0x00E20046, 0x00621104, 0x0183C908, + 0x00E20015, 0x00EE009D, 0x01A3E301, 0x00E2001B, 0x0183C900, + 0x00E2001B, 0x00210001, 0x00EE0020, 0x01A3E302, 0x00E2009D, + 0x0183C901, 0x00E2009D, 0x00210002, 0x0235D700, 0x0208A204, + 0x0071C908, 0x000F8207, 0x000FC207, 0x0071C920, 0x000F8507, + 0x000FC507, 0x0228A240, 0x02269A40, 0x00094004, 0x00621104, + 0x0180C908, 0x00E40031, 0x00621112, 0x01A3C801, 0x00E2002B, + 0x00294000, 0x0228A220, 0x01A69ABF, 0x002F8000, 0x002FC000, + 0x0198A204, 0x0001C022, 0x01B1A220, 0x0001C106, 0x00088007, + 0x0183C903, 0x00E2009D, 0x0228A220, 0x0071890C, 0x0208A206, + 0x0198A206, 0x0001C022, 0x01B1A220, 0x0001C106, 0x00088007, + 0x00EE009D, 0x00621104, 0x0183C908, 0x00E2004A, 0x00EE009D, + 0x01A3C901, 0x00E20050, 0x0021E7FF, 0x0183E007, 0x00E2009D, + 0x00EE0054, 0x0061600B, 0x0021E7FF, 0x0183C507, 0x00E2009D, + 0x01A3E301, 0x00E2005A, 0x0183C900, 0x00E2005A, 0x00210001, + 0x00EE005F, 0x01A3E302, 0x00E20005, 0x0183C901, 0x00E20005, + 0x00210002, 0x0235D700, 0x0208A204, 0x000F8109, 0x000FC109, + 0x0071C918, 0x000F8407, 0x000FC407, 0x0001C022, 0x01A1A2BF, + 0x0001C106, 0x00088007, 0x02269A40, 0x00094004, 0x00621112, + 0x01A3C801, 0x00E4007F, 0x00621104, 0x0180C908, 0x00E4008D, + 0x00621128, 0x0183C908, 0x00E2006C, 0x01A3C901, 0x00E2007B, + 0x0021E7FF, 0x0183E007, 0x00E2007F, 0x00EE006C, 0x0061600B, + 0x0021E7FF, 0x0183C507, 0x00E4006C, 0x00621111, 0x01A3C801, + 0x00E2007F, 0x00621110, 0x01A3C801, 0x00E20082, 0x0228A220, + 0x00621119, 0x01A3C801, 0x00E20086, 0x0001C022, 0x01B1A220, + 0x0001C106, 0x00088007, 0x0198A204, 0x00294000, 0x01A69ABF, + 0x002F8000, 0x002FC000, 0x0183C903, 0x00E20005, 0x0228A220, + 0x0071890C, 0x0208A206, 0x0198A206, 0x0001C022, 0x01B1A220, + 0x0001C106, 0x00088007, 0x00EE009D, 0x00621128, 0x0183C908, + 0x00E20005, 0x00621104, 0x0183C908, 0x00E200A6, 0x0062111C, + 0x0183C908, 0x00E20005, 0x0071890C, 0x0208A206, 0x0198A206, + 0x00718908, 0x0208A206, 0x00EE0005, ~0 + }; + + /* Bi-Modal RAID-0/1 */ + static const unsigned int raid[] = { + 0x00F20145, 0x00EE20FA, 0x00EE20A7, 0x0001C009, 0x00EE0004, + 0x00220000, 0x0001000B, 0x037003FF, 0x00700018, 0x037003FE, + 0x037043FD, 0x00704118, 0x037043FC, 0x01A3D240, 0x00E20017, + 0x00B3C235, 0x00E40018, 0x0093C104, 0x00E80014, 0x0093C004, + 0x00E80017, 0x01020000, 0x00274020, 0x00EE0083, 0x0080C904, + 0x0093C104, 0x00EA0020, 0x0093C103, 0x00EC001F, 0x00220002, + 0x00924104, 0x0005C009, 0x00EE0058, 0x0093CF04, 0x00E80026, + 0x00900F01, 0x00600001, 0x00910400, 0x00EE0058, 0x00601604, + 0x01A00003, 0x00E2002C, 0x01018000, 0x00274040, 0x00EE0083, + 0x0093CF03, 0x00EC0031, 0x00220003, 0x00924F04, 0x0005C009, + 0x00810104, 0x00B3C235, 0x00E20037, 0x0022C000, 0x00218210, + 0x00EE0039, 0x0022C001, 0x00218200, 0x00600401, 0x00A04901, + 0x00604101, 0x01A0C401, 0x00E20040, 0x00216202, 0x00EE0041, + 0x00216101, 0x02018506, 0x00EE2141, 0x00904901, 0x00E20049, + 0x00A00401, 0x00600001, 0x02E0C301, 0x00EE2141, 0x00216303, + 0x037003EE, 0x01A3C001, 0x00E40105, 0x00250080, 0x00204000, + 0x002042F1, 0x0004C001, 0x00230001, 0x00100006, 0x02C18605, + 0x00100006, 0x01A3D502, 0x00E20055, 0x00EE0053, 0x00004009, + 0x00000004, 0x00B3C235, 0x00E40062, 0x0022C001, 0x0020C000, + 0x00EE2141, 0x0020C001, 0x00EE2141, 0x00EE006B, 0x0022C000, + 0x0060D207, 0x00EE2141, 0x00B3C242, 0x00E20069, 0x01A3D601, + 0x00E2006E, 0x02E0C301, 0x00EE2141, 0x00230001, 0x00301303, + 0x00EE007B, 0x00218210, 0x01A3C301, 0x00E20073, 0x00216202, + 0x00EE0074, 0x00216101, 0x02018506, 0x00214000, 0x037003EE, + 0x01A3C001, 0x00E40108, 0x00230001, 0x00100006, 0x00250080, + 0x00204000, 0x002042F1, 0x0004C001, 0x00EE007F, 0x0024C000, + 0x01A3D1F0, 0x00E20088, 0x00230001, 0x00300000, 0x01A3D202, + 0x00E20085, 0x00EE00A5, 0x00B3C800, 0x00E20096, 0x00218000, + 0x00924709, 0x0005C009, 0x00B20802, 0x00E40093, 0x037103FD, + 0x00710418, 0x037103FC, 0x00EE0006, 0x00220000, 0x0001000F, + 0x00EE0006, 0x00800B0C, 0x00B00001, 0x00204000, 0x00208550, + 0x00208440, 0x002083E0, 0x00208200, 0x00208100, 0x01008000, + 0x037083EE, 0x02008212, 0x02008216, 0x01A3C201, 0x00E400A5, + 0x0100C000, 0x00EE20FA, 0x02800000, 0x00208000, 0x00B24C00, + 0x00E400AD, 0x00224001, 0x00724910, 0x0005C009, 0x00B3CDC4, + 0x00E200D5, 0x00B3CD29, 0x00E200D5, 0x00B3CD20, 0x00E200D5, + 0x00B3CD24, 0x00E200D5, 0x00B3CDC5, 0x00E200D2, 0x00B3CD39, + 0x00E200D2, 0x00B3CD30, 0x00E200D2, 0x00B3CD34, 0x00E200D2, + 0x00B3CDCA, 0x00E200CF, 0x00B3CD35, 0x00E200CF, 0x00B3CDC8, + 0x00E200CC, 0x00B3CD25, 0x00E200CC, 0x00B3CD40, 0x00E200CB, + 0x00B3CD42, 0x00E200CB, 0x01018000, 0x00EE0083, 0x0025C000, + 0x036083EE, 0x0000800D, 0x00EE00D8, 0x036083EE, 0x00208035, + 0x00EE00DA, 0x036083EE, 0x00208035, 0x00EE00DA, 0x00208007, + 0x036083EE, 0x00208025, 0x036083EF, 0x02400000, 0x01A3D208, + 0x00E200D8, 0x0067120A, 0x0021C000, 0x0021C224, 0x00220000, + 0x00404B1C, 0x00600105, 0x00800007, 0x0020C00E, 0x00214000, + 0x01004000, 0x01A0411F, 0x00404E01, 0x01A3C101, 0x00E200F1, + 0x00B20800, 0x00E400D8, 0x00220001, 0x0080490B, 0x00B04101, + 0x0040411C, 0x00EE00E1, 0x02269A01, 0x01020000, 0x02275D80, + 0x01A3D202, 0x00E200F4, 0x01B75D80, 0x01030000, 0x01B69A01, + 0x00EE00D8, 0x01A3D204, 0x00E40104, 0x00224000, 0x0020C00E, + 0x0020001E, 0x00214000, 0x01004000, 0x0212490E, 0x00214001, + 0x01004000, 0x02400000, 0x00B3D702, 0x00E80112, 0x00EE010E, + 0x00B3D702, 0x00E80112, 0x00B3D702, 0x00E4010E, 0x00230001, + 0x00EE0140, 0x00200005, 0x036003EE, 0x00204001, 0x00EE0116, + 0x00230001, 0x00100006, 0x02C18605, 0x00100006, 0x01A3D1F0, + 0x00E40083, 0x037003EE, 0x01A3C002, 0x00E20121, 0x0020A300, + 0x0183D102, 0x00E20124, 0x037003EE, 0x01A00005, 0x036003EE, + 0x01A0910F, 0x00B3C20F, 0x00E2012F, 0x01A3D502, 0x00E20116, + 0x01A3C002, 0x00E20116, 0x00B3D702, 0x00E4012C, 0x00300000, + 0x00EE011F, 0x02C18605, 0x00100006, 0x00EE0116, 0x01A3D1F0, + 0x00E40083, 0x037003EE, 0x01A3C004, 0x00E20088, 0x00200003, + 0x036003EE, 0x01A3D502, 0x00E20136, 0x00230001, 0x00B3C101, + 0x00E4012C, 0x00100006, 0x02C18605, 0x00100006, 0x00204000, + 0x00EE0116, 0x00100006, 0x01A3D1F0, 0x00E40083, 0x01000000, + 0x02400000, ~0 + }; + + if (force) + previous_mode = UNKNOWN_MODE; + + if (mode == previous_mode) + return; + + /* decide what needs to be done using the STD in my logbook */ + switch (previous_mode) { + case OXNASSATA_RAID1: + switch (mode) { + case OXNASSATA_RAID0: + changeparameters = 1; + break; + case OXNASSATA_NOTRAID: + changeparameters = 1; + progmicrocode = 1; + break; + } + break; + case OXNASSATA_RAID0: + switch (mode) { + case OXNASSATA_RAID1: + changeparameters = 1; + break; + case OXNASSATA_NOTRAID: + changeparameters = 1; + progmicrocode = 1; + break; + } + break; + case OXNASSATA_NOTRAID: + case UNKNOWN_MODE: + changeparameters = 1; + progmicrocode = 1; + break; + } + + /* no need to reprogram everything if already in the right mode */ + if (progmicrocode) { + /* reset micro-code processor */ + iowrite32(1, core_base + PROC_RESET); + wmb(); + + /* select micro-code */ + switch (mode) { + case OXNASSATA_RAID1: + case OXNASSATA_RAID0: + VPRINTK("Loading RAID micro-code\n"); + src = (unsigned int *)&raid[1]; + break; + case OXNASSATA_NOTRAID: + VPRINTK("Loading JBOD micro-code\n"); + src = (unsigned int *)&jbod[1]; + break; + default: + BUG(); + break; + } + + /* load micro code */ + dst = core_base + UCODE_STORE; + while (*src != ~0) { + iowrite32(*src, dst); + src++; + dst += sizeof(*src); + } + wmb(); + } + + if (changeparameters) { + u32 reg; + /* set other mode dependent flags */ + switch (mode) { + case OXNASSATA_RAID1: + /* clear JBOD mode */ + reg = ioread32(core_base + DATA_PLANE_CTRL); + reg |= DPC_JBOD_UCODE; + reg &= ~DPC_FIS_SWCH; + iowrite32(reg, core_base + DATA_PLANE_CTRL); + wmb(); + + /* set the hardware up for RAID-1 */ + iowrite32(0, core_base + RAID_WP_BOT_LOW); + iowrite32(0, core_base + RAID_WP_BOT_HIGH); + iowrite32(0xffffffff, core_base + RAID_WP_TOP_LOW); + iowrite32(0x7fffffff, core_base + RAID_WP_TOP_HIGH); + iowrite32(0, core_base + RAID_SIZE_LOW); + iowrite32(0, core_base + RAID_SIZE_HIGH); + wmb(); + break; + case OXNASSATA_RAID0: + /* clear JBOD mode */ + reg = ioread32(core_base + DATA_PLANE_CTRL); + reg |= DPC_JBOD_UCODE; + reg &= ~DPC_FIS_SWCH; + iowrite32(reg, core_base + DATA_PLANE_CTRL); + wmb(); + + /* set the hardware up for RAID-1 */ + iowrite32(0, core_base + RAID_WP_BOT_LOW); + iowrite32(0, core_base + RAID_WP_BOT_HIGH); + iowrite32(0xffffffff, core_base + RAID_WP_TOP_LOW); + iowrite32(0x7fffffff, core_base + RAID_WP_TOP_HIGH); + iowrite32(0xffffffff, core_base + RAID_SIZE_LOW); + iowrite32(0x7fffffff, core_base + RAID_SIZE_HIGH); + wmb(); + break; + case OXNASSATA_NOTRAID: + /* enable jbod mode */ + reg = ioread32(core_base + DATA_PLANE_CTRL); + reg &= ~DPC_JBOD_UCODE; + reg |= DPC_FIS_SWCH; + iowrite32(reg, core_base + DATA_PLANE_CTRL); + wmb(); + + /* start micro-code processor*/ + iowrite32(1, core_base + PROC_START); + break; + default: + break; + } + } + + previous_mode = mode; +} + +/** + * sends a sync-escape if there is a link present + */ +static inline void sata_oxnas_send_sync_escape(struct ata_port *ap) +{ + struct sata_oxnas_port_priv *pd = ap->private_data; + u32 reg; + + /* read the SSTATUS register and only send a sync escape if there is a + * link active */ + if ((sata_oxnas_link_read(ap, 0x20) & 3) == 3) { + reg = ioread32(pd->port_base + SATA_COMMAND); + reg &= ~SATA_OPCODE_MASK; + reg |= CMD_SYNC_ESCAPE; + iowrite32(reg, pd->port_base + SATA_COMMAND); + } +} + +/* clears errors */ +static inline void sata_oxnas_clear_CS_error(u32 *base) +{ + u32 reg; + + reg = ioread32(base + SATA_CONTROL); + reg &= SATA_CTL_ERR_MASK; + iowrite32(reg, base + SATA_CONTROL); +} + +/** + * Clears the error caused by the core's registers being accessed when the + * core is busy. + */ +static inline void sata_oxnas_clear_reg_access_error(u32 *base) +{ + u32 reg; + + reg = ioread32(base + INT_STATUS); + + DPRINTK("ENTER\n"); + if (reg & INT_REG_ACCESS_ERR) { + printk(KERN_INFO "clearing register access error\n"); + iowrite32(INT_REG_ACCESS_ERR, base + INT_STATUS); + } + if (reg & INT_REG_ACCESS_ERR) + printk(KERN_INFO "register access error didn't clear\n"); +} + +/** + * Clean up all the state machines in the sata core. + * @return post cleanup action required + */ +static int sata_oxnas_cleanup(struct ata_host *ah) +{ + int actions_required = 0; + + printk(KERN_INFO "ox820sata: reseting SATA core\n"); + + /* core not recovering, reset it */ + mdelay(5); + sata_oxnas_reset_core(ah); + mdelay(5); + actions_required |= OXNAS_SATA_REINIT; + /* Perform any SATA core re-initialisation after reset post reset init + * needs to be called for both ports as there's one reset for both + * ports */ + + sata_oxnas_post_reset_init(ah->ports[0]); + + return actions_required; +} + +void sata_oxnas_freeze_host(struct ata_port *ap) +{ + struct sata_oxnas_host_priv *hd = ap->host->private_data; + + DPRINTK("ENTER\n"); + hd->port_in_eh |= BIT(ap->port_no); + smp_wmb(); +} + +void sata_oxnas_thaw_host(struct ata_port *ap) +{ + struct sata_oxnas_host_priv *hd = ap->host->private_data; + + DPRINTK("ENTER\n"); + hd->port_in_eh &= ~BIT(ap->port_no); + smp_wmb(); +} + +static void sata_oxnas_post_internal_cmd(struct ata_queued_cmd *qc) +{ + DPRINTK("ENTER\n"); + /* If the core is busy here, make it idle */ + if (qc->flags & ATA_QCFLAG_FAILED) + sata_oxnas_cleanup(qc->ap->host); +} + + +/** + * turn on the interrupts + * + * @param ap Hardware with the registers in + */ +static void sata_oxnas_irq_on(struct ata_port *ap) +{ + struct sata_oxnas_port_priv *pd = ap->private_data; + u32 mask = (COREINT_END << ap->port_no); + + /* Clear pending interrupts */ + iowrite32(~0, pd->port_base + INT_CLEAR); + iowrite32(mask, pd->core_base + CORE_INT_STATUS); + wmb(); + + /* enable End of command interrupt */ + iowrite32(INT_WANT, pd->port_base + INT_ENABLE); + iowrite32(mask, pd->core_base + CORE_INT_ENABLE); +} + + +/** @return true if the port has a cable connected */ +int sata_oxnas_check_link(struct ata_port *ap) +{ + int reg; + + sata_oxnas_scr_read_port(ap, SCR_STATUS, ®); + /* Check for the cable present indicated by SCR status bit-0 set */ + return reg & 0x1; +} + +/** + * ata_std_postreset - standard postreset callback + * @link: the target ata_link + * @classes: classes of attached devices + * + * This function is invoked after a successful reset. Note that + * the device might have been reset more than once using + * different reset methods before postreset is invoked. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +static void sata_oxnas_postreset(struct ata_link *link, unsigned int *classes) +{ + struct ata_port *ap = link->ap; + + unsigned int dev; + + DPRINTK("ENTER\n"); + ata_std_postreset(link, classes); + + /* turn on phy error detection by removing the masks */ + sata_oxnas_link_write(ap , 0x0c, 0x30003); + + /* bail out if no device is present */ + if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { + DPRINTK("EXIT, no device\n"); + return; + } + + /* go through all the devices and configure them */ + for (dev = 0; dev < ATA_MAX_DEVICES; ++dev) { + if (ap->link.device[dev].class == ATA_DEV_ATA) + sata_oxnas_dev_config(&(ap->link.device[dev])); + } + + DPRINTK("EXIT\n"); +} + +/** + * Called to read the hardware registers / DMA buffers, to + * obtain the current set of taskfile register values. + * @param ap hardware with the registers in + * @param tf taskfile to read the registers into + */ +static void sata_oxnas_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct sata_oxnas_port_priv *port_priv = ap->private_data; + void __iomem *port_base = port_priv->port_base; + /* read the orb registers */ + u32 Orb1 = ioread32(port_base + ORB1); + u32 Orb2 = ioread32(port_base + ORB2); + u32 Orb3 = ioread32(port_base + ORB3); + u32 Orb4 = ioread32(port_base + ORB4); + + /* read common 28/48 bit tf parameters */ + tf->device = (Orb1 >> 24); + tf->nsect = (Orb2 >> 0); + tf->feature = (Orb2 >> 16); + tf->command = sata_oxnas_check_status(ap); + + /* read 48 or 28 bit tf parameters */ + if (tf->flags & ATA_TFLAG_LBA48) { + tf->hob_nsect = (Orb2 >> 8); + tf->lbal = (Orb3 >> 0); + tf->lbam = (Orb3 >> 8); + tf->lbah = (Orb3 >> 16); + tf->hob_lbal = (Orb3 >> 24); + tf->hob_lbam = (Orb4 >> 0); + tf->hob_lbah = (Orb4 >> 8); + /* feature ext and control are write only */ + } else { + /* read 28-bit lba */ + tf->lbal = (Orb3 >> 0); + tf->lbam = (Orb3 >> 8); + tf->lbah = (Orb3 >> 16); + } +} + +/** + * Read a result task-file from the sata core registers. + */ +static bool sata_oxnas_qc_fill_rtf(struct ata_queued_cmd *qc) +{ + /* Read the most recently received FIS from the SATA core ORB registers + and convert to an ATA taskfile */ + sata_oxnas_tf_read(qc->ap, &qc->result_tf); + return true; +} + +/** + * Reads the Status ATA shadow register from hardware. + * + * @return The status register + */ +static u8 sata_oxnas_check_status(struct ata_port *ap) +{ + u32 Reg; + u8 status; + struct sata_oxnas_port_priv *port_priv = ap->private_data; + void __iomem *port_base = port_priv->port_base; + + /* read byte 3 of Orb2 register */ + status = ioread32(port_base + ORB2) >> 24; + + /* check for the drive going missing indicated by SCR status bits + * 0-3 = 0 */ + sata_oxnas_scr_read_port(ap, SCR_STATUS, &Reg); + + if (!(Reg & 0x1)) { + status |= ATA_DF; + status |= ATA_ERR; + } + + return status; +} + +/** + * Prepare as much as possible for a command without involving anything that is + * shared between ports. + */ +static void sata_oxnas_qc_prep(struct ata_queued_cmd *qc) +{ + struct sata_oxnas_port_priv *pd; + int port_no = qc->ap->port_no; + + /* if the port's not connected, complete now with an error */ + /* + if (!sata_oxnas_check_link(qc->ap)) { + printk(KERN_ERR "port %d not connected completing with error\n", + qc->ap->port_no); + qc->err_mask |= AC_ERR_ATA_BUS; + ata_qc_complete(qc); + } + */ + /* both pio and dma commands use dma */ + if (ata_is_dma(qc->tf.protocol) || ata_is_pio(qc->tf.protocol)) { + /* program the scatterlist into the prd table */ + ata_bmdma_qc_prep(qc); + + /* point the sgdma controller at the dma request structure */ + pd = qc->ap->private_data; + + iowrite32(pd->sgdma_request_pa, + pd->sgdma_base + SGDMA_REQUESTPTR); + + /* setup the request table */ + if (port_no == 0) { + pd->sgdma_request->control = + (qc->dma_dir == DMA_FROM_DEVICE) ? + SGDMA_REQCTL0IN : SGDMA_REQCTL0OUT; + } else { + pd->sgdma_request->control = + (qc->dma_dir == DMA_FROM_DEVICE) ? + SGDMA_REQCTL1IN : SGDMA_REQCTL1OUT; + } + pd->sgdma_request->qualifier = SGDMA_REQQUAL; + pd->sgdma_request->src_pa = qc->ap->bmdma_prd_dma; + pd->sgdma_request->dst_pa = qc->ap->bmdma_prd_dma; + smp_wmb(); + + /* tell it to wait */ + iowrite32(SGDMA_CONTROL_NOGO, pd->sgdma_base + SGDMA_CONTROL); + } +} + +static int sata_oxnas_port_start(struct ata_port *ap) +{ + struct sata_oxnas_host_priv *host_priv = ap->host->private_data; + struct device *dev = ap->host->dev; + struct sata_oxnas_port_priv *pp; + void *mem; + dma_addr_t mem_dma; + + DPRINTK("ENTER\n"); + + pp = kzalloc(sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + + pp->port_base = host_priv->port_base[ap->port_no]; + pp->sgdma_base = host_priv->sgdma_base[ap->port_no]; + pp->core_base = host_priv->core_base; + + /* preallocated */ + if (host_priv->dma_size >= SATA_OXNAS_DMA_SIZE * SATA_OXNAS_MAX_PORTS) { + mem_dma = host_priv->dma_base + + ap->port_no * SATA_OXNAS_DMA_SIZE; + mem = ioremap(mem_dma, SATA_OXNAS_DMA_SIZE); + + } else { + mem = dma_alloc_coherent(dev, SATA_OXNAS_DMA_SIZE, &mem_dma, + GFP_KERNEL); + } + if (!mem) + goto err_ret; + + pp->sgdma_request_pa = mem_dma; + pp->sgdma_request = mem; + ap->bmdma_prd_dma = mem_dma + sizeof(struct sgdma_request); + ap->bmdma_prd = mem + sizeof(struct sgdma_request); + + ap->private_data = pp; + + sata_oxnas_post_reset_init(ap); + + return 0; + +err_ret: + kfree(pp); + return -ENOMEM; + +} + +static void sata_oxnas_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host->dev; + struct sata_oxnas_port_priv *pp = ap->private_data; + struct sata_oxnas_host_priv *host_priv = ap->host->private_data; + + DPRINTK("ENTER\n"); + ap->private_data = NULL; + if (host_priv->dma_size) { + iounmap(pp->sgdma_request); + } else { + dma_free_coherent(dev, SATA_OXNAS_DMA_SIZE, + pp->sgdma_request, pp->sgdma_request_pa); + } + + kfree(pp); +} + +static void sata_oxnas_post_reset_init(struct ata_port *ap) +{ + struct sata_oxnas_port_priv *pd = ap->private_data; + uint dev; + int no_microcode = 0; + + DPRINTK("ENTER\n"); + if (no_microcode) { + u32 reg; + sata_oxnas_set_mode(ap, UNKNOWN_MODE, 1); + reg = readl(pd->core_base + DEVICE_CONTROL); + reg |= DEVICE_CONTROL_ATA_ERR_OVERRIDE; + writel(reg, pd->core_base + DEVICE_CONTROL); + } else { + /* JBOD uCode */ + sata_oxnas_set_mode(ap, OXNASSATA_NOTRAID, 1); + /* Turn the work around off as it may have been left on by any + * HW-RAID code that we've been working with */ + writel(0x0, pd->core_base + PORT_ERROR_MASK); + } + /* turn on phy error detection by removing the masks */ + sata_oxnas_link_write(ap, 0x0C, 0x30003); + + /* enable hotplug event detection */ + sata_oxnas_scr_write_port(ap, SCR_ERROR, ~0); + sata_oxnas_scr_write_port(ap, SERROR_IRQ_MASK, 0x03feffff); + sata_oxnas_scr_write_port(ap, SCR_ACTIVE, ~0 & ~(1 << 26) & ~(1 << 16)); + + /* enable interrupts for ports */ + sata_oxnas_irq_on(ap); + + /* go through all the devices and configure them */ + for (dev = 0; dev < ATA_MAX_DEVICES; ++dev) { + if (ap->link.device[dev].class == ATA_DEV_ATA) { + sata_std_hardreset(&ap->link, NULL, jiffies + HZ); + sata_oxnas_dev_config(&(ap->link.device[dev])); + } + } + + /* clean up any remaining errors */ + sata_oxnas_scr_write_port(ap, SCR_ERROR, ~0); + VPRINTK("done\n"); +} + +/** + * host_stop() is called when the rmmod or hot unplug process begins. The + * hook must stop all hardware interrupts, DMA engines, etc. + * + * @param ap hardware with the registers in + */ +static void sata_oxnas_host_stop(struct ata_host *host_set) +{ + DPRINTK("\n"); +} + + +#define ERROR_HW_ACQUIRE_TIMEOUT_JIFFIES (10 * HZ) +static void sata_oxnas_error_handler(struct ata_port *ap) +{ + DPRINTK("Enter port_no %d\n", ap->port_no); + sata_oxnas_freeze_host(ap); + + /* If the core is busy here, make it idle */ + sata_oxnas_cleanup(ap->host); + + ata_std_error_handler(ap); + + sata_oxnas_thaw_host(ap); +} + +static int sata_oxnas_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct sata_oxnas_port_priv *pd = ap->private_data; + void __iomem *port_base = pd->port_base; + int rc; + + struct ata_taskfile tf; + u32 Command_Reg; + + DPRINTK("ENTER\n"); + + port_base = pd->port_base; + + if (ata_link_offline(link)) { + DPRINTK("PHY reports no device\n"); + *class = ATA_DEV_NONE; + goto out; + } + + /* write value to register */ + iowrite32((ap->ctl) << 24, port_base + ORB4); + + /* command the core to send a control FIS */ + Command_Reg = ioread32(port_base + SATA_COMMAND); + Command_Reg &= ~SATA_OPCODE_MASK; + Command_Reg |= CMD_WRITE_TO_ORB_REGS_NO_COMMAND; + iowrite32(Command_Reg, port_base + SATA_COMMAND); + udelay(20); /* FIXME: flush */ + + /* write value to register */ + iowrite32((ap->ctl | ATA_SRST) << 24, port_base + ORB4); + + /* command the core to send a control FIS */ + Command_Reg &= ~SATA_OPCODE_MASK; + Command_Reg |= CMD_WRITE_TO_ORB_REGS_NO_COMMAND; + iowrite32(Command_Reg, port_base + SATA_COMMAND); + udelay(20); /* FIXME: flush */ + + /* write value to register */ + iowrite32((ap->ctl) << 24, port_base + ORB4); + + /* command the core to send a control FIS */ + Command_Reg &= ~SATA_OPCODE_MASK; + Command_Reg |= CMD_WRITE_TO_ORB_REGS_NO_COMMAND; + iowrite32(Command_Reg, port_base + SATA_COMMAND); + + msleep(150); + + rc = ata_sff_wait_ready(link, deadline); + + /* if link is occupied, -ENODEV too is an error */ + if (rc && (rc != -ENODEV || sata_scr_valid(link))) { + ata_link_printk(link, KERN_ERR, "SRST failed (errno=%d)\n", rc); + return rc; + } + + /* determine by signature whether we have ATA or ATAPI devices */ + sata_oxnas_tf_read(ap, &tf); + *class = ata_dev_classify(&tf); + + if (*class == ATA_DEV_UNKNOWN) + *class = ATA_DEV_NONE; + +out: + DPRINTK("EXIT, class=%u\n", *class); + return 0; +} + + +int sata_oxnas_init_controller(struct ata_host *host) +{ + return 0; +} + +/** + * Ref bug-6320 + * + * This code is a work around for a DMA hardware bug that will repeat the + * penultimate 8-bytes on some reads. This code will check that the amount + * of data transferred is a multiple of 512 bytes, if not the in it will + * fetch the correct data from a buffer in the SATA core and copy it into + * memory. + * + * @param port SATA port to check and if necessary, correct. + */ +static int ox820sata_bug_6320_workaround(struct ata_port *ap) +{ + struct sata_oxnas_port_priv *pd = ap->private_data; + void __iomem *core_base = pd->core_base; + int is_read; + int quads_transferred; + int remainder; + int sector_quads_remaining; + int bug_present = 0; + + /* Only want to apply fix to reads */ + is_read = !(readl(core_base + DM_DBG1) & (ap->port_no ? + BIT(CORE_PORT1_DATA_DIR_BIT) : + BIT(CORE_PORT0_DATA_DIR_BIT))); + + /* Check for an incomplete transfer, i.e. not a multiple of 512 bytes + transferred (datacount_port register counts quads transferred) */ + quads_transferred = + readl(core_base + (ap->port_no ? + DATACOUNT_PORT1 : DATACOUNT_PORT0)); + + remainder = quads_transferred & 0x7f; + sector_quads_remaining = remainder ? (0x80 - remainder) : 0; + + if (is_read && (sector_quads_remaining == 2)) { + bug_present = 1; + } else if (sector_quads_remaining) { + if (is_read) { + printk(KERN_WARNING "SATA read fixup cannot deal with" \ + " %d quads remaining\n", + sector_quads_remaining); + } else { + printk(KERN_WARNING "SATA write fixup of %d quads" \ + " remaining not supported\n", + sector_quads_remaining); + } + } + + return bug_present; +} + +/* This port done an interrupt */ +static void sata_oxnas_port_irq(struct ata_port *ap, int force_error) +{ + struct ata_queued_cmd *qc; + struct sata_oxnas_port_priv *pd = ap->private_data; + void __iomem *port_base = pd->port_base; + + u32 int_status; + unsigned long flags = 0; + + /* DPRINTK("ENTER irqstatus %x\n", ioread32(port_base + INT_STATUS)); */ +/* + if (ap->qc_active & (1 << ATA_TAG_INTERNAL)) { + qc = ata_qc_from_tag(ap, ATA_TAG_INTERNAL); + DPRINTK("completing non-ncq cmd\n"); + + if (qc) { + ata_qc_complete(qc); + } + return; + } +*/ + + qc = ata_qc_from_tag(ap, ap->link.active_tag); + + + /* record the port's interrupt */ + int_status = ioread32(port_base + INT_STATUS); + + /* If there's no command associated with this IRQ, ignore it. We may get + * spurious interrupts when cleaning-up after a failed command, ignore + * these too. */ + if (likely(qc)) { + /* get the status before any error cleanup */ + qc->err_mask = ac_err_mask(sata_oxnas_check_status(ap)); + if (force_error) { + /* Pretend there has been a link error */ + qc->err_mask |= AC_ERR_ATA_BUS; + DPRINTK(" ####force error####\n"); + } + /* tell libata we're done */ + local_irq_save(flags); + sata_oxnas_irq_clear(ap); + local_irq_restore(flags); + ata_qc_complete(qc); + } else { + VPRINTK("Ignoring interrupt, can't find the command tag=" \ + "%d %08x\n", ap->link.active_tag, ap->qc_active); + } + + /* maybe a hotplug event */ + if (unlikely(int_status & INT_LINK_SERROR)) { + u32 serror; + + sata_oxnas_scr_read_port(ap, SCR_ERROR, &serror); + if (serror & (SERR_DEV_XCHG | SERR_PHYRDY_CHG)) { + ata_ehi_hotplugged(&ap->link.eh_info); + ata_port_freeze(ap); + } + } +} + +/** + * irq_handler is the interrupt handling routine registered with the system, + * by libata. + */ +static irqreturn_t sata_oxnas_interrupt(int irq, void *dev_instance) +{ + struct ata_host *ah = dev_instance; + struct sata_oxnas_host_priv *hd = ah->private_data; + void __iomem *core_base = hd->core_base; + + u32 int_status; + irqreturn_t ret = IRQ_NONE; + u32 port_no; + u32 mask; + int bug_present; + + /* loop until there are no more interrupts */ + while ((int_status = ioread32(core_base + CORE_INT_STATUS)) & + COREINT_END) { + + /* clear any interrupt */ + iowrite32(int_status, core_base + CORE_INT_CLEAR); + + /* Only need this workaround for single disk systems as dual + * disk will use uCode which prevents this read underrun problem + * from occuring. + * All single disk systems will use port 0 */ + + for (port_no = 0; port_no < SATA_OXNAS_MAX_PORTS; ++port_no) { + /* check the raw end of command interrupt to see if the + * port is done */ + mask = (CORERAW_HOST << port_no); + if (int_status & mask) { + /* this port had an interrupt, clear it */ + iowrite32(mask, core_base + CORE_INT_CLEAR); + bug_present = ox820sata_bug_6320_workaround( + ah->ports[port_no]); + sata_oxnas_port_irq(ah->ports[port_no], + bug_present); + ret = IRQ_HANDLED; + } + } + } + + return ret; +} + +/* + * scsi mid-layer and libata interface structures + */ +static struct scsi_host_template sata_oxnas_sht = { + ATA_NCQ_SHT("sata_oxnas"), + .can_queue = SATA_OXNAS_QUEUE_DEPTH, + .sg_tablesize = SATA_OXNAS_MAX_PRD, + .dma_boundary = ATA_DMA_BOUNDARY, + .unchecked_isa_dma = 0, +}; + + +static struct ata_port_operations sata_oxnas_ops = { + .inherits = &sata_port_ops, + .qc_prep = sata_oxnas_qc_prep, + .qc_issue = sata_oxnas_qc_issue, + .qc_fill_rtf = sata_oxnas_qc_fill_rtf, + + .scr_read = sata_oxnas_scr_read, + .scr_write = sata_oxnas_scr_write, + + /* .freeze = sata_oxnas_freeze, */ + /* .thaw = sata_oxnas_thaw, */ + .softreset = sata_oxnas_softreset, + /* .hardreset = sata_oxnas_hardreset, */ + .postreset = sata_oxnas_postreset, + .error_handler = sata_oxnas_error_handler, + .post_internal_cmd = sata_oxnas_post_internal_cmd, + + .port_start = sata_oxnas_port_start, + .port_stop = sata_oxnas_port_stop, + + .host_stop = sata_oxnas_host_stop, + /* .pmp_attach = sata_oxnas_pmp_attach, */ + /* .pmp_detach = sata_oxnas_pmp_detach, */ + .sff_check_status = sata_oxnas_check_status, +}; + +static const struct ata_port_info sata_oxnas_port_info = { + .flags = SATA_OXNAS_HOST_FLAGS, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &sata_oxnas_ops, +}; + +static int sata_oxnas_probe(struct platform_device *ofdev) +{ + int retval = -ENXIO; + void __iomem *port_base = NULL; + void __iomem *sgdma_base = NULL; + void __iomem *core_base = NULL; + void __iomem *phy_base = NULL; + struct reset_control *rstc; + + struct resource res = {}; + struct sata_oxnas_host_priv *host_priv = NULL; + int irq = 0; + struct ata_host *host = NULL; + struct clk *clk = NULL; + + const struct ata_port_info *ppi[] = { &sata_oxnas_port_info, NULL }; + + port_base = of_iomap(ofdev->dev.of_node, 0); + if (!port_base) + goto error_exit_with_cleanup; + + sgdma_base = of_iomap(ofdev->dev.of_node, 1); + if (!sgdma_base) + goto error_exit_with_cleanup; + + core_base = of_iomap(ofdev->dev.of_node, 2); + if (!core_base) + goto error_exit_with_cleanup; + + phy_base = of_iomap(ofdev->dev.of_node, 3); + if (!phy_base) + goto error_exit_with_cleanup; + + host_priv = devm_kzalloc(&ofdev->dev, + sizeof(struct sata_oxnas_host_priv), + GFP_KERNEL); + if (!host_priv) + goto error_exit_with_cleanup; + + host_priv->port_base[0] = port_base; + host_priv->sgdma_base[0] = sgdma_base; + host_priv->core_base = core_base; + host_priv->phy_base = phy_base; + + if (!of_address_to_resource(ofdev->dev.of_node, 4, &res)) { + host_priv->dma_base = res.start; + host_priv->dma_size = resource_size(&res); + } + + irq = irq_of_parse_and_map(ofdev->dev.of_node, 0); + if (!irq) { + dev_err(&ofdev->dev, "invalid irq from platform\n"); + goto error_exit_with_cleanup; + } + host_priv->irq = irq; + + clk = of_clk_get(ofdev->dev.of_node, 0); + if (IS_ERR(clk)) { + retval = PTR_ERR(clk); + clk = NULL; + goto error_exit_with_cleanup; + } + host_priv->clk = clk; + + rstc = devm_reset_control_get(&ofdev->dev, "sata"); + if (IS_ERR(rstc)) { + retval = PTR_ERR(rstc); + goto error_exit_with_cleanup; + } + host_priv->rst_sata = rstc; + + rstc = devm_reset_control_get(&ofdev->dev, "link"); + if (IS_ERR(rstc)) { + retval = PTR_ERR(rstc); + goto error_exit_with_cleanup; + } + host_priv->rst_link = rstc; + + rstc = devm_reset_control_get(&ofdev->dev, "phy"); + if (IS_ERR(rstc)) { + retval = PTR_ERR(rstc); + goto error_exit_with_cleanup; + } + host_priv->rst_phy = rstc; + + /* allocate host structure */ + host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_OXNAS_MAX_PORTS); + if (!host) { + retval = -ENOMEM; + goto error_exit_with_cleanup; + } + host->private_data = host_priv; + host->iomap = port_base; + + /* initialize host controller */ + retval = sata_oxnas_init_controller(host); + if (retval) + goto error_exit_with_cleanup; + + /* + * Now, register with libATA core, this will also initiate the + * device discovery process, invoking our port_start() handler & + * error_handler() to execute a dummy softreset EH session + */ + ata_host_activate(host, irq, sata_oxnas_interrupt, SATA_OXNAS_IRQ_FLAG, + &sata_oxnas_sht); + + return 0; + +error_exit_with_cleanup: + if (irq) + irq_dispose_mapping(host_priv->irq); + if (clk) + clk_put(clk); + if (host) + ata_host_detach(host); + if (port_base) + iounmap(port_base); + if (sgdma_base) + iounmap(sgdma_base); + if (core_base) + iounmap(core_base); + if (phy_base) + iounmap(phy_base); + return retval; +} + + +static int sata_oxnas_remove(struct platform_device *ofdev) +{ + struct ata_host *host = dev_get_drvdata(&ofdev->dev); + struct sata_oxnas_host_priv *host_priv = host->private_data; + + ata_host_detach(host); + + irq_dispose_mapping(host_priv->irq); + iounmap(host_priv->port_base); + iounmap(host_priv->sgdma_base); + iounmap(host_priv->core_base); + + /* reset Controller, Link and PHY */ + reset_control_assert(host_priv->rst_sata); + reset_control_assert(host_priv->rst_link); + reset_control_assert(host_priv->rst_phy); + + /* Disable the clock to the SATA block */ + clk_disable_unprepare(host_priv->clk); + clk_put(host_priv->clk); + + return 0; +} + +#ifdef CONFIG_PM +static int sata_oxnas_suspend(struct platform_device *op, pm_message_t state) +{ + struct ata_host *host = dev_get_drvdata(&op->dev); + + return ata_host_suspend(host, state); +} + +static int sata_oxnas_resume(struct platform_device *op) +{ + struct ata_host *host = dev_get_drvdata(&op->dev); + int ret; + + ret = sata_oxnas_init_controller(host); + if (ret) { + dev_err(&op->dev, "Error initializing hardware\n"); + return ret; + } + ata_host_resume(host); + return 0; +} +#endif + + + +static struct of_device_id oxnas_sata_match[] = { + { + .compatible = "plxtech,nas782x-sata", + }, + {}, +}; + +MODULE_DEVICE_TABLE(of, oxnas_sata_match); + +static struct platform_driver oxnas_sata_driver = { + .driver = { + .name = "oxnas-sata", + .owner = THIS_MODULE, + .of_match_table = oxnas_sata_match, + }, + .probe = sata_oxnas_probe, + .remove = sata_oxnas_remove, +#ifdef CONFIG_PM + .suspend = sata_oxnas_suspend, + .resume = sata_oxnas_resume, +#endif +}; + +module_platform_driver(oxnas_sata_driver); + +MODULE_LICENSE("GPL"); +MODULE_VERSION("1.0"); +MODULE_AUTHOR("Oxford Semiconductor Ltd."); +MODULE_DESCRIPTION("934 SATA core controler"); diff --git a/target/linux/oxnas/files/drivers/clk/clk-oxnas.c b/target/linux/oxnas/files/drivers/clk/clk-oxnas.c new file mode 100644 index 0000000..8d80c4f --- /dev/null +++ b/target/linux/oxnas/files/drivers/clk/clk-oxnas.c @@ -0,0 +1,262 @@ +/* + * Copyright (C) 2010 Broadcom + * Copyright (C) 2012 Stephen Warren + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/delay.h> +#include <linux/stringify.h> +#include <linux/reset.h> +#include <linux/io.h> +#include <mach/hardware.h> +#include <mach/utils.h> + +#define MHZ (1000 * 1000) + +static unsigned long plla_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long fin = parent_rate; + unsigned long pll0; + unsigned long fbdiv, refdiv, outdiv; + + pll0 = readl_relaxed(SYS_CTRL_PLLA_CTRL0); + refdiv = (pll0 >> PLLA_REFDIV_SHIFT) & PLLA_REFDIV_MASK; + refdiv += 1; + outdiv = (pll0 >> PLLA_OUTDIV_SHIFT) & PLLA_OUTDIV_MASK; + outdiv += 1; + fbdiv = readl_relaxed(SYS_CTRL_PLLA_CTRL1); + + /* seems we will not be here when pll is bypassed, so ignore this + * case */ + + return fin / MHZ * fbdiv / (refdiv * outdiv) / 32768 * MHZ; +} + +static const char *pll_clk_parents[] = { + "oscillator", +}; + +static struct clk_ops plla_ops = { + .recalc_rate = plla_clk_recalc_rate, +}; + +static struct clk_init_data clk_plla_init = { + .name = "plla", + .ops = &plla_ops, + .parent_names = pll_clk_parents, + .num_parents = ARRAY_SIZE(pll_clk_parents), +}; + +static struct clk_hw plla_hw = { + .init = &clk_plla_init, +}; + +static struct device_node *node_pllb; + +int pllb_clk_enable(struct clk_hw *hw) +{ + struct reset_control *rstc; + + rstc = of_reset_control_get(node_pllb, NULL); + if (IS_ERR(rstc)) + return PTR_ERR(rstc); + + /* put PLL into bypass */ + oxnas_register_set_mask(SEC_CTRL_PLLB_CTRL0, BIT(PLLB_BYPASS)); + wmb(); + udelay(10); + reset_control_assert(rstc); + udelay(10); + /* set PLL B control information */ + writel((1 << PLLB_ENSAT) | (1 << PLLB_OUTDIV) | (2 << PLLB_REFDIV), + SEC_CTRL_PLLB_CTRL0); + reset_control_deassert(rstc); + reset_control_put(rstc); + udelay(100); + oxnas_register_clear_mask(SEC_CTRL_PLLB_CTRL0, BIT(PLLB_BYPASS)); + + return 0; +} + +void pllb_clk_disable(struct clk_hw *hw) +{ + struct reset_control *rstc; + + /* put PLL into bypass */ + oxnas_register_set_mask(SEC_CTRL_PLLB_CTRL0, BIT(PLLB_BYPASS)); + wmb(); + udelay(10); + + rstc = of_reset_control_get(node_pllb, NULL); + if (!IS_ERR(rstc)) + reset_control_assert(rstc); +} + +static struct clk_ops pllb_ops = { + .enable = pllb_clk_enable, + .disable = pllb_clk_disable, +}; + +static struct clk_init_data clk_pllb_init = { + .name = "pllb", + .ops = &pllb_ops, + .parent_names = pll_clk_parents, + .num_parents = ARRAY_SIZE(pll_clk_parents), +}; + +static struct clk_hw pllb_hw = { + .init = &clk_pllb_init, +}; + +/* standard gate clock */ +struct clk_std { + struct clk_hw hw; + signed char bit; +}; + +#define NUM_STD_CLKS 17 +#define to_stdclk(_hw) container_of(_hw, struct clk_std, hw) + +static int std_clk_is_enabled(struct clk_hw *hw) +{ + struct clk_std *std = to_stdclk(hw); + + return readl_relaxed(SYSCTRL_CLK_STAT) & BIT(std->bit); +} + +static int std_clk_enable(struct clk_hw *hw) +{ + struct clk_std *std = to_stdclk(hw); + + writel(BIT(std->bit), SYS_CTRL_CLK_SET_CTRL); + return 0; +} + +static void std_clk_disable(struct clk_hw *hw) +{ + struct clk_std *std = to_stdclk(hw); + + writel(BIT(std->bit), SYS_CTRL_CLK_CLR_CTRL); +} + +static struct clk_ops std_clk_ops = { + .enable = std_clk_enable, + .disable = std_clk_disable, + .is_enabled = std_clk_is_enabled, +}; + +static const char *std_clk_parents[] = { + "oscillator", +}; + +static const char *eth_parents[] = { + "gmacclk", +}; + +#define DECLARE_STD_CLKP(__clk, __bit, __parent) \ +static struct clk_init_data clk_##__clk##_init = { \ + .name = __stringify(__clk), \ + .ops = &std_clk_ops, \ + .parent_names = __parent, \ + .num_parents = ARRAY_SIZE(__parent), \ +}; \ + \ +static struct clk_std clk_##__clk = { \ + .bit = __bit, \ + .hw = { \ + .init = &clk_##__clk##_init, \ + }, \ +} + +#define DECLARE_STD_CLK(__clk, __bit) DECLARE_STD_CLKP(__clk, __bit, \ + std_clk_parents) + +DECLARE_STD_CLK(leon, 0); +DECLARE_STD_CLK(dma_sgdma, 1); +DECLARE_STD_CLK(cipher, 2); +DECLARE_STD_CLK(sd, 3); +DECLARE_STD_CLK(sata, 4); +DECLARE_STD_CLK(audio, 5); +DECLARE_STD_CLK(usbmph, 6); +DECLARE_STD_CLKP(etha, 7, eth_parents); +DECLARE_STD_CLK(pciea, 8); +DECLARE_STD_CLK(static, 9); +DECLARE_STD_CLK(ethb, 10); +DECLARE_STD_CLK(pcieb, 11); +DECLARE_STD_CLK(ref600, 12); +DECLARE_STD_CLK(usbdev, 13); + +struct clk_hw *std_clk_hw_tbl[] = { + &clk_leon.hw, + &clk_dma_sgdma.hw, + &clk_cipher.hw, + &clk_sd.hw, + &clk_sata.hw, + &clk_audio.hw, + &clk_usbmph.hw, + &clk_etha.hw, + &clk_pciea.hw, + &clk_static.hw, + &clk_ethb.hw, + &clk_pcieb.hw, + &clk_ref600.hw, + &clk_usbdev.hw, +}; + +struct clk *std_clk_tbl[ARRAY_SIZE(std_clk_hw_tbl)]; + +static struct clk_onecell_data std_clk_data; + +void __init oxnas_init_stdclk(struct device_node *np) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(std_clk_hw_tbl); i++) { + std_clk_tbl[i] = clk_register(NULL, std_clk_hw_tbl[i]); + BUG_ON(IS_ERR(std_clk_tbl[i])); + } + std_clk_data.clks = std_clk_tbl; + std_clk_data.clk_num = ARRAY_SIZE(std_clk_tbl); + of_clk_add_provider(np, of_clk_src_onecell_get, &std_clk_data); +} +CLK_OF_DECLARE(oxnas_pllstd, "plxtech,nas782x-stdclk", oxnas_init_stdclk); + +void __init oxnas_init_plla(struct device_node *np) +{ + struct clk *clk; + + clk = clk_register(NULL, &plla_hw); + BUG_ON(IS_ERR(clk)); + /* mark it as enabled */ + clk_prepare_enable(clk); + of_clk_add_provider(np, of_clk_src_simple_get, clk); +} +CLK_OF_DECLARE(oxnas_plla, "plxtech,nas782x-plla", oxnas_init_plla); + +void __init oxnas_init_pllb(struct device_node *np) +{ + struct clk *clk; + + node_pllb = np; + + clk = clk_register(NULL, &pllb_hw); + BUG_ON(IS_ERR(clk)); + of_clk_add_provider(np, of_clk_src_simple_get, clk); +} +CLK_OF_DECLARE(oxnas_pllb, "plxtech,nas782x-pllb", oxnas_init_pllb); diff --git a/target/linux/oxnas/files/drivers/clocksource/oxnas_rps_timer.c b/target/linux/oxnas/files/drivers/clocksource/oxnas_rps_timer.c new file mode 100644 index 0000000..7c8c4cf --- /dev/null +++ b/target/linux/oxnas/files/drivers/clocksource/oxnas_rps_timer.c @@ -0,0 +1,96 @@ +/* + * arch/arm/mach-ox820/rps-time.c + * + * Copyright (C) 2009 Oxford Semiconductor Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/clockchips.h> +#include <linux/clk.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> +#include <linux/sched_clock.h> +#include <mach/hardware.h> + +enum { + TIMER_LOAD = 0, + TIMER_CURR = 4, + TIMER_CTRL = 8, + TIMER_CLRINT = 0xC, + + TIMER_BITS = 24, + + TIMER_MAX_VAL = (1 << TIMER_BITS) - 1, + + TIMER_PERIODIC = (1 << 6), + TIMER_ENABLE = (1 << 7), + + TIMER_DIV1 = (0 << 2), + TIMER_DIV16 = (1 << 2), + TIMER_DIV256 = (2 << 2), + + TIMER1_OFFSET = 0, + TIMER2_OFFSET = 0x20, + +}; + +static u64 notrace rps_read_sched_clock(void) +{ + return ~readl_relaxed(RPSA_TIMER2_VAL); +} + +static void __init rps_clocksource_init(void __iomem *base, ulong ref_rate) +{ + int ret; + ulong clock_rate; + /* use prescale 16 */ + clock_rate = ref_rate / 16; + + iowrite32(TIMER_MAX_VAL, base + TIMER_LOAD); + iowrite32(TIMER_PERIODIC | TIMER_ENABLE | TIMER_DIV16, + base + TIMER_CTRL); + + ret = clocksource_mmio_init(base + TIMER_CURR, "rps_clocksource_timer", + clock_rate, 250, TIMER_BITS, + clocksource_mmio_readl_down); + if (ret) + panic("can't register clocksource\n"); + + sched_clock_register(rps_read_sched_clock, TIMER_BITS, clock_rate); +} + +static void __init rps_timer_init(struct device_node *np) +{ + struct clk *refclk; + unsigned long ref_rate; + void __iomem *base; + + refclk = of_clk_get(np, 0); + + if (IS_ERR(refclk) || clk_prepare_enable(refclk)) + panic("rps_timer_init: failed to get refclk\n"); + ref_rate = clk_get_rate(refclk); + + base = of_iomap(np, 0); + if (!base) + panic("rps_timer_init: failed to map io\n"); + + rps_clocksource_init(base + TIMER2_OFFSET, ref_rate); +} + +CLOCKSOURCE_OF_DECLARE(nas782x, "plxtech,nas782x-rps-timer", rps_timer_init); diff --git a/target/linux/oxnas/files/drivers/irqchip/irq-rps.c b/target/linux/oxnas/files/drivers/irqchip/irq-rps.c new file mode 100644 index 0000000..5795406f --- /dev/null +++ b/target/linux/oxnas/files/drivers/irqchip/irq-rps.c @@ -0,0 +1,146 @@ +#include <linux/irqdomain.h> +#include <linux/irq.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/err.h> +#include <linux/io.h> + +#include "irqchip.h" + +struct rps_chip_data { + void __iomem *base; + struct irq_chip chip; + struct irq_domain *domain; +} rps_data; + +enum { + RPS_IRQ_BASE = 64, + RPS_IRQ_COUNT = 32, + PRS_HWIRQ_BASE = 0, + + RPS_STATUS = 0, + RPS_RAW_STATUS = 4, + RPS_UNMASK = 8, + RPS_MASK = 0xc, +}; + +/* + * Routines to acknowledge, disable and enable interrupts + */ +static void rps_mask_irq(struct irq_data *d) +{ + struct rps_chip_data *chip_data = irq_data_get_irq_chip_data(d); + u32 mask = BIT(d->hwirq); + + iowrite32(mask, chip_data->base + RPS_MASK); +} + +static void rps_unmask_irq(struct irq_data *d) +{ + struct rps_chip_data *chip_data = irq_data_get_irq_chip_data(d); + u32 mask = BIT(d->hwirq); + + iowrite32(mask, chip_data->base + RPS_UNMASK); +} + +static struct irq_chip rps_chip = { + .name = "RPS", + .irq_mask = rps_mask_irq, + .irq_unmask = rps_unmask_irq, +}; + +static int rps_irq_domain_xlate(struct irq_domain *d, + struct device_node *controller, + const u32 *intspec, unsigned int intsize, + unsigned long *out_hwirq, + unsigned int *out_type) +{ + if (d->of_node != controller) + return -EINVAL; + if (intsize < 1) + return -EINVAL; + + *out_hwirq = intspec[0]; + /* Honestly I do not know the type */ + *out_type = IRQ_TYPE_LEVEL_HIGH; + + return 0; +} + +static int rps_irq_domain_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hw) +{ + irq_set_chip_and_handler(irq, &rps_chip, handle_level_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + irq_set_chip_data(irq, d->host_data); + return 0; +} + +const struct irq_domain_ops rps_irq_domain_ops = { + .map = rps_irq_domain_map, + .xlate = rps_irq_domain_xlate, +}; + +static void rps_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) +{ + struct rps_chip_data *chip_data = irq_get_handler_data(irq); + struct irq_chip *chip = irq_get_chip(irq); + unsigned int cascade_irq, rps_irq; + u32 status; + + chained_irq_enter(chip, desc); + + status = ioread32(chip_data->base + RPS_STATUS); + rps_irq = __ffs(status); + cascade_irq = irq_find_mapping(chip_data->domain, rps_irq); + + if (unlikely(rps_irq >= RPS_IRQ_COUNT)) + handle_bad_irq(cascade_irq, desc); + else + generic_handle_irq(cascade_irq); + + chained_irq_exit(chip, desc); +} + +#ifdef CONFIG_OF +int __init rps_of_init(struct device_node *node, struct device_node *parent) +{ + void __iomem *rps_base; + int irq_start = RPS_IRQ_BASE; + int irq_base; + int irq; + + if (WARN_ON(!node)) + return -ENODEV; + + rps_base = of_iomap(node, 0); + WARN(!rps_base, "unable to map rps registers\n"); + rps_data.base = rps_base; + + irq_base = irq_alloc_descs(irq_start, 0, RPS_IRQ_COUNT, numa_node_id()); + if (IS_ERR_VALUE(irq_base)) { + WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n", + irq_start); + irq_base = irq_start; + } + + rps_data.domain = irq_domain_add_legacy(node, RPS_IRQ_COUNT, irq_base, + PRS_HWIRQ_BASE, &rps_irq_domain_ops, &rps_data); + + if (WARN_ON(!rps_data.domain)) + return -ENOMEM; + + if (parent) { + irq = irq_of_parse_and_map(node, 0); + if (irq_set_handler_data(irq, &rps_data) != 0) + BUG(); + irq_set_chained_handler(irq, rps_handle_cascade_irq); + } + return 0; + +} + +IRQCHIP_DECLARE(nas782x, "plxtech,nas782x-rps", rps_of_init); +#endif diff --git a/target/linux/oxnas/files/drivers/mtd/nand/oxnas_nand.c b/target/linux/oxnas/files/drivers/mtd/nand/oxnas_nand.c new file mode 100644 index 0000000..55eb009 --- /dev/null +++ b/target/linux/oxnas/files/drivers/mtd/nand/oxnas_nand.c @@ -0,0 +1,102 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/mtd/nand.h> +#include <linux/of_gpio.h> +#include <linux/of_platform.h> +#include <linux/clk.h> +#include <linux/reset.h> +#include <mach/utils.h> + +/* nand commands */ +#define NAND_CMD_ALE BIT(18) +#define NAND_CMD_CLE BIT(19) +#define NAND_CMD_CS 0 +#define NAND_CMD_RESET 0xff +#define NAND_CMD (NAND_CMD_CS | NAND_CMD_CLE) +#define NAND_ADDR (NAND_CMD_CS | NAND_CMD_ALE) +#define NAND_DATA (NAND_CMD_CS) + +static void oxnas_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long nandaddr = (unsigned long) this->IO_ADDR_W; + + if (ctrl & NAND_CTRL_CHANGE) { + nandaddr &= ~(NAND_CMD | NAND_ADDR); + if (ctrl & NAND_CLE) + nandaddr |= NAND_CMD; + else if (ctrl & NAND_ALE) + nandaddr |= NAND_ADDR; + this->IO_ADDR_W = (void __iomem *) nandaddr; + } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, (void __iomem *) nandaddr); +} + +static int oxnas_nand_probe(struct platform_device *pdev) +{ + /* enable clock and release static block reset */ + struct clk *clk = of_clk_get(pdev->dev.of_node, 0); + + if (IS_ERR(clk)) + return PTR_ERR(clk); + + clk_prepare_enable(clk); + device_reset(&pdev->dev); + + return 0; +} + +/* allow users to override the partition in DT using the cmdline */ +static const char * part_probes[] = { "cmdlinepart", "ofpart", NULL }; + +static struct platform_nand_data oxnas_nand_data = { + .chip = { + .nr_chips = 1, + .chip_delay = 30, + .part_probe_types = part_probes, + }, + .ctrl = { + .probe = oxnas_nand_probe, + .cmd_ctrl = oxnas_cmd_ctrl, + } +}; + +/* + * Try to find the node inside the DT. If it is available attach out + * platform_nand_data + */ +static int __init oxnas_register_nand(void) +{ + struct device_node *node; + struct platform_device *pdev; + + node = of_find_compatible_node(NULL, NULL, "plxtech,nand-nas782x"); + if (!node) + return -ENOENT; + pdev = of_find_device_by_node(node); + if (!pdev) + return -EINVAL; + pdev->dev.platform_data = &oxnas_nand_data; + of_node_put(node); + return 0; +} + +subsys_initcall(oxnas_register_nand); + +static const struct of_device_id oxnas_nand_ids[] = { + { .compatible = "plxtech,nand-nas782x"}, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, oxnas_nand_ids); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ma Haijun"); +MODULE_DESCRIPTION("NAND glue for Oxnas platforms"); +MODULE_ALIAS("platform:oxnas_nand"); diff --git a/target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c b/target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c new file mode 100644 index 0000000..9e8d6d9 --- /dev/null +++ b/target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c @@ -0,0 +1,676 @@ +/* + * PCIe driver for PLX NAS782X SoCs + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/mbus.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/of_address.h> +#include <linux/of_pci.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/of_gpio.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/reset.h> +#include <mach/iomap.h> +#include <mach/hardware.h> +#include <mach/utils.h> + +#define VERSION_ID_MAGIC 0x082510b5 +#define LINK_UP_TIMEOUT_SECONDS 1 +#define NUM_CONTROLLERS 1 + +enum { + PCIE_DEVICE_TYPE_MASK = 0x0F, + PCIE_DEVICE_TYPE_ENDPOINT = 0, + PCIE_DEVICE_TYPE_LEGACY_ENDPOINT = 1, + PCIE_DEVICE_TYPE_ROOT = 4, + + PCIE_LTSSM = BIT(4), + PCIE_READY_ENTR_L23 = BIT(9), + PCIE_LINK_UP = BIT(11), + PCIE_OBTRANS = BIT(12), +}; + +enum { + HCSL_BIAS_ON = BIT(0), + HCSL_PCIE_EN = BIT(1), + HCSL_PCIEA_EN = BIT(2), + HCSL_PCIEB_EN = BIT(3), +}; + +enum { + /* pcie phy reg offset */ + PHY_ADDR = 0, + PHY_DATA = 4, + /* phy data reg bits */ + READ_EN = BIT(16), + WRITE_EN = BIT(17), + CAP_DATA = BIT(18), +}; + +/* core config registers */ +enum { + PCI_CONFIG_VERSION_DEVICEID = 0, + PCI_CONFIG_COMMAND_STATUS = 4, +}; + +/* inbound config registers */ +enum { + IB_ADDR_XLATE_ENABLE = 0xFC, + + /* bits */ + ENABLE_IN_ADDR_TRANS = BIT(0), +}; + +/* outbound config registers, offset relative to PCIE_POM0_MEM_ADDR */ +enum { + PCIE_POM0_MEM_ADDR = 0, + PCIE_POM1_MEM_ADDR = 4, + PCIE_IN0_MEM_ADDR = 8, + PCIE_IN1_MEM_ADDR = 12, + PCIE_IN_IO_ADDR = 16, + PCIE_IN_CFG0_ADDR = 20, + PCIE_IN_CFG1_ADDR = 24, + PCIE_IN_MSG_ADDR = 28, + PCIE_IN0_MEM_LIMIT = 32, + PCIE_IN1_MEM_LIMIT = 36, + PCIE_IN_IO_LIMIT = 40, + PCIE_IN_CFG0_LIMIT = 44, + PCIE_IN_CFG1_LIMIT = 48, + PCIE_IN_MSG_LIMIT = 52, + PCIE_AHB_SLAVE_CTRL = 56, + + PCIE_SLAVE_BE_SHIFT = 22, +}; + +#define ADDR_VAL(val) ((val) & 0xFFFF) +#define DATA_VAL(val) ((val) & 0xFFFF) + +#define PCIE_SLAVE_BE(val) ((val) << PCIE_SLAVE_BE_SHIFT) +#define PCIE_SLAVE_BE_MASK PCIE_SLAVE_BE(0xF) + +struct oxnas_pcie_shared { + /* seems all access are serialized, no lock required */ + int refcount; +}; + +/* Structure representing one PCIe interfaces */ +struct oxnas_pcie { + void __iomem *cfgbase; + void __iomem *base; + void __iomem *inbound; + void __iomem *outbound; + void __iomem *pcie_ctrl; + + int haslink; + struct platform_device *pdev; + struct resource io; + struct resource cfg; + struct resource pre_mem; /* prefetchable */ + struct resource non_mem; /* non-prefetchable */ + struct resource busn; /* max available bus numbers */ + int card_reset; /* gpio pin, optional */ + unsigned hcsl_en; /* hcsl pci enable bit */ + struct clk *clk; + struct clk *busclk; /* for pcie bus, actually the PLLB */ + void *private_data[1]; + spinlock_t lock; +}; + +static struct oxnas_pcie_shared pcie_shared = { + .refcount = 0, +}; + +static inline struct oxnas_pcie *sys_to_pcie(struct pci_sys_data *sys) +{ + return sys->private_data; +} + + +static inline void set_out_lanes(struct oxnas_pcie *pcie, unsigned lanes) +{ + oxnas_register_value_mask(pcie->outbound + PCIE_AHB_SLAVE_CTRL, + PCIE_SLAVE_BE_MASK, PCIE_SLAVE_BE(lanes)); + wmb(); +} + +static int oxnas_pcie_link_up(struct oxnas_pcie *pcie) +{ + unsigned long end; + + /* Poll for PCIE link up */ + end = jiffies + (LINK_UP_TIMEOUT_SECONDS * HZ); + while (!time_after(jiffies, end)) { + if (readl(pcie->pcie_ctrl) & PCIE_LINK_UP) + return 1; + } + return 0; +} + +static void __init oxnas_pcie_setup_hw(struct oxnas_pcie *pcie) +{ + /* We won't have any inbound address translation. This allows PCI + * devices to access anywhere in the AHB address map. Might be regarded + * as a bit dangerous, but let's get things working before we worry + * about that + */ + oxnas_register_clear_mask(pcie->inbound + IB_ADDR_XLATE_ENABLE, + ENABLE_IN_ADDR_TRANS); + wmb(); + + /* + * Program outbound translation windows + * + * Outbound window is what is referred to as "PCI client" region in HRM + * + * Could use the larger alternative address space to get >>64M regions + * for graphics cards etc., but will not bother at this point. + * + * IP bug means that AMBA window size must be a power of 2 + * + * Set mem0 window for first 16MB of outbound window non-prefetchable + * Set mem1 window for second 16MB of outbound window prefetchable + * Set io window for next 16MB of outbound window + * Set cfg0 for final 1MB of outbound window + * + * Ignore mem1, cfg1 and msg windows for now as no obvious use cases for + * 820 that would need them + * + * Probably ideally want no offset between mem0 window start as seen by + * ARM and as seen on PCI bus and get Linux to assign memory regions to + * PCI devices using the same "PCI client" region start address as seen + * by ARM + */ + + /* Set PCIeA mem0 region to be 1st 16MB of the 64MB PCIeA window */ + writel_relaxed(pcie->non_mem.start, pcie->outbound + PCIE_IN0_MEM_ADDR); + writel_relaxed(pcie->non_mem.end, pcie->outbound + PCIE_IN0_MEM_LIMIT); + writel_relaxed(pcie->non_mem.start, pcie->outbound + PCIE_POM0_MEM_ADDR); + + /* Set PCIeA mem1 region to be 2nd 16MB of the 64MB PCIeA window */ + writel_relaxed(pcie->pre_mem.start, pcie->outbound + PCIE_IN1_MEM_ADDR); + writel_relaxed(pcie->pre_mem.end, pcie->outbound + PCIE_IN1_MEM_LIMIT); + writel_relaxed(pcie->pre_mem.start, pcie->outbound + PCIE_POM1_MEM_ADDR); + + /* Set PCIeA io to be third 16M region of the 64MB PCIeA window*/ + writel_relaxed(pcie->io.start, pcie->outbound + PCIE_IN_IO_ADDR); + writel_relaxed(pcie->io.end, pcie->outbound + PCIE_IN_IO_LIMIT); + + /* Set PCIeA cgf0 to be last 16M region of the 64MB PCIeA window*/ + writel_relaxed(pcie->cfg.start, pcie->outbound + PCIE_IN_CFG0_ADDR); + writel_relaxed(pcie->cfg.end, pcie->outbound + PCIE_IN_CFG0_LIMIT); + wmb(); + + /* Enable outbound address translation */ + oxnas_register_set_mask(pcie->pcie_ctrl, PCIE_OBTRANS); + wmb(); + + /* + * Program PCIe command register for core to: + * enable memory space + * enable bus master + * enable io + */ + writel_relaxed(7, pcie->base + PCI_CONFIG_COMMAND_STATUS); + /* which is which */ + wmb(); +} + +static unsigned oxnas_pcie_cfg_to_offset( + struct pci_sys_data *sys, + unsigned char bus_number, + unsigned int devfn, + int where) +{ + unsigned int function = PCI_FUNC(devfn); + unsigned int slot = PCI_SLOT(devfn); + unsigned char bus_number_offset; + + bus_number_offset = bus_number - sys->busnr; + + /* + * We'll assume for now that the offset, function, slot, bus encoding + * should map onto linear, contiguous addresses in PCIe config space, + * albeit that the majority will be unused as only slot 0 is valid for + * any PCIe bus and most devices have only function 0 + * + * Could be that PCIe in fact works by not encoding the slot number into + * the config space address as it's known that only slot 0 is valid. + * We'll have to experiment if/when we get a PCIe switch connected to + * the PCIe host + */ + return (bus_number_offset << 20) | (slot << 15) | (function << 12) | + (where & ~3); +} + +/* PCI configuration space write function */ +static int oxnas_pcie_wr_conf(struct pci_bus *bus, u32 devfn, + int where, int size, u32 val) +{ + unsigned long flags; + struct oxnas_pcie *pcie = sys_to_pcie(bus->sysdata); + unsigned offset; + u32 value; + u32 lanes; + + /* Only a single device per bus for PCIe point-to-point links */ + if (PCI_SLOT(devfn) > 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (!pcie->haslink) + return PCIBIOS_DEVICE_NOT_FOUND; + + offset = oxnas_pcie_cfg_to_offset(bus->sysdata, bus->number, devfn, + where); + + value = val << (8 * (where & 3)); + lanes = (0xf >> (4-size)) << (where & 3); + /* it race with mem and io write, but the possibility is low, normally + * all config writes happens at driver initialize stage, wont interleave + * with others. + * and many pcie cards use dword (4bytes) access mem/io access only, + * so not bother to copy that ugly work-around now. */ + spin_lock_irqsave(&pcie->lock, flags); + set_out_lanes(pcie, lanes); + writel_relaxed(value, pcie->cfgbase + offset); + set_out_lanes(pcie, 0xf); + spin_unlock_irqrestore(&pcie->lock, flags); + + return PCIBIOS_SUCCESSFUL; +} + +/* PCI configuration space read function */ +static int oxnas_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, + int size, u32 *val) +{ + struct oxnas_pcie *pcie = sys_to_pcie(bus->sysdata); + unsigned offset; + u32 value; + u32 left_bytes, right_bytes; + + /* Only a single device per bus for PCIe point-to-point links */ + if (PCI_SLOT(devfn) > 0) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + if (!pcie->haslink) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + offset = oxnas_pcie_cfg_to_offset(bus->sysdata, bus->number, devfn, + where); + value = readl_relaxed(pcie->cfgbase + offset); + left_bytes = where & 3; + right_bytes = 4 - left_bytes - size; + value <<= right_bytes * 8; + value >>= (left_bytes + right_bytes) * 8; + *val = value; + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops oxnas_pcie_ops = { + .read = oxnas_pcie_rd_conf, + .write = oxnas_pcie_wr_conf, +}; + +static int __init oxnas_pcie_setup(int nr, struct pci_sys_data *sys) +{ + struct oxnas_pcie *pcie = sys_to_pcie(sys); + + pci_add_resource_offset(&sys->resources, &pcie->non_mem, sys->mem_offset); + pci_add_resource_offset(&sys->resources, &pcie->pre_mem, sys->mem_offset); + pci_add_resource_offset(&sys->resources, &pcie->io, sys->io_offset); + pci_add_resource(&sys->resources, &pcie->busn); + if (sys->busnr == 0) { /* default one */ + sys->busnr = pcie->busn.start; + } + /* do not use devm_ioremap_resource, it does not like cfg resource */ + pcie->cfgbase = devm_ioremap(&pcie->pdev->dev, pcie->cfg.start, + resource_size(&pcie->cfg)); + if (!pcie->cfgbase) + return -ENOMEM; + + oxnas_pcie_setup_hw(pcie); + + return 1; +} + +static void __init oxnas_pcie_enable(struct device *dev, struct oxnas_pcie *pcie) +{ + struct hw_pci hw; + int i; + + memset(&hw, 0, sizeof(hw)); + for (i = 0; i < NUM_CONTROLLERS; i++) + pcie->private_data[i] = pcie; + + hw.nr_controllers = NUM_CONTROLLERS; +/* I think use stack pointer is a bad idea though it is valid in this case */ + hw.private_data = pcie->private_data; + hw.setup = oxnas_pcie_setup; + hw.map_irq = of_irq_parse_and_map_pci; + hw.ops = &oxnas_pcie_ops; + + /* pass dev to maintain of tree, interrupt mapping rely on this */ + pci_common_init_dev(dev, &hw); +} + +void oxnas_pcie_init_shared_hw(struct platform_device *pdev, + void __iomem *phybase) +{ + struct reset_control *rstc; + int ret; + + /* generate clocks from HCSL buffers, shared parts */ + writel(HCSL_BIAS_ON|HCSL_PCIE_EN, SYS_CTRL_HCSL_CTRL); + + /* Ensure PCIe PHY is properly reset */ + rstc = reset_control_get(&pdev->dev, "phy"); + if (IS_ERR(rstc)) { + ret = PTR_ERR(rstc); + } else { + ret = reset_control_reset(rstc); + reset_control_put(rstc); + } + + if (ret) { + dev_err(&pdev->dev, "phy reset failed %d\n", ret); + return; + } + + /* Enable PCIe Pre-Emphasis: What these value means? */ + + writel(ADDR_VAL(0x0014), phybase + PHY_ADDR); + writel(DATA_VAL(0xce10) | CAP_DATA, phybase + PHY_DATA); + writel(DATA_VAL(0xce10) | WRITE_EN, phybase + PHY_DATA); + + writel(ADDR_VAL(0x2004), phybase + PHY_ADDR); + writel(DATA_VAL(0x82c7) | CAP_DATA, phybase + PHY_DATA); + writel(DATA_VAL(0x82c7) | WRITE_EN, phybase + PHY_DATA); +} + +static int oxnas_pcie_shared_init(struct platform_device *pdev) +{ + if (++pcie_shared.refcount == 1) { + /* we are the first */ + struct device_node *np = pdev->dev.of_node; + void __iomem *phy = of_iomap(np, 2); + if (!phy) { + --pcie_shared.refcount; + return -ENOMEM; + } + oxnas_pcie_init_shared_hw(pdev, phy); + iounmap(phy); + return 0; + } else { + return 0; + } +} + +#if 0 +/* maybe we will call it when enter low power state */ +static void oxnas_pcie_shared_deinit(struct platform_device *pdev) +{ + if (--pcie_shared.refcount == 0) { + /* no cleanup needed */; + } +} +#endif + +static int __init +oxnas_pcie_map_registers(struct platform_device *pdev, + struct device_node *np, + struct oxnas_pcie *pcie) +{ + struct resource regs; + int ret = 0; + u32 outbound_ctrl_offset; + u32 pcie_ctrl_offset; + + /* 2 is reserved for shared phy */ + ret = of_address_to_resource(np, 0, ®s); + if (ret) + return -EINVAL; + pcie->base = devm_ioremap_resource(&pdev->dev, ®s); + if (!pcie->base) + return -ENOMEM; + + ret = of_address_to_resource(np, 1, ®s); + if (ret) + return -EINVAL; + pcie->inbound = devm_ioremap_resource(&pdev->dev, ®s); + if (!pcie->inbound) + return -ENOMEM; + + + if (of_property_read_u32(np, "plxtech,pcie-outbound-offset", + &outbound_ctrl_offset)) + return -EINVAL; + /* SYSCRTL is shared by too many drivers, so is mapped by board file */ + pcie->outbound = IOMEM(OXNAS_SYSCRTL_BASE_VA + outbound_ctrl_offset); + + if (of_property_read_u32(np, "plxtech,pcie-ctrl-offset", + &pcie_ctrl_offset)) + return -EINVAL; + pcie->pcie_ctrl = IOMEM(OXNAS_SYSCRTL_BASE_VA + pcie_ctrl_offset); + + return 0; +} + +static int __init oxnas_pcie_init_res(struct platform_device *pdev, + struct oxnas_pcie *pcie, + struct device_node *np) +{ + struct of_pci_range range; + struct of_pci_range_parser parser; + int ret; + + if (of_pci_range_parser_init(&parser, np)) + return -EINVAL; + + /* Get the I/O and memory ranges from DT */ + for_each_of_pci_range(&parser, &range) { + + unsigned long restype = range.flags & IORESOURCE_TYPE_BITS; + if (restype == IORESOURCE_IO) { + of_pci_range_to_resource(&range, np, &pcie->io); + pcie->io.name = "I/O"; + } + if (restype == IORESOURCE_MEM) { + if (range.flags & IORESOURCE_PREFETCH) { + of_pci_range_to_resource(&range, np, &pcie->pre_mem); + pcie->pre_mem.name = "PRE MEM"; + } else { + of_pci_range_to_resource(&range, np, &pcie->non_mem); + pcie->non_mem.name = "NON MEM"; + } + + } + if (restype == 0) + of_pci_range_to_resource(&range, np, &pcie->cfg); + } + + /* Get the bus range */ + ret = of_pci_parse_bus_range(np, &pcie->busn); + + if (ret) { + dev_err(&pdev->dev, "failed to parse bus-range property: %d\n", + ret); + return ret; + } + + pcie->card_reset = of_get_gpio(np, 0); + if (pcie->card_reset < 0) + dev_info(&pdev->dev, "card reset gpio pin not exists\n"); + + if (of_property_read_u32(np, "plxtech,pcie-hcsl-bit", &pcie->hcsl_en)) + return -EINVAL; + + pcie->clk = of_clk_get_by_name(np, "pcie"); + if (IS_ERR(pcie->clk)) { + return PTR_ERR(pcie->clk); + } + + pcie->busclk = of_clk_get_by_name(np, "busclk"); + if (IS_ERR(pcie->busclk)) { + clk_put(pcie->clk); + return PTR_ERR(pcie->busclk); + } + + return 0; +} + +static void oxnas_pcie_init_hw(struct platform_device *pdev, + struct oxnas_pcie *pcie) +{ + u32 version_id; + int ret; + + clk_prepare_enable(pcie->busclk); + + /* reset PCIe cards use hard-wired gpio pin */ + if (pcie->card_reset >= 0 && + !gpio_direction_output(pcie->card_reset, 0)) { + wmb(); + mdelay(10); + /* must tri-state the pin to pull it up */ + gpio_direction_input(pcie->card_reset); + wmb(); + mdelay(100); + } + + oxnas_register_set_mask(SYS_CTRL_HCSL_CTRL, BIT(pcie->hcsl_en)); + + /* core */ + ret = device_reset(&pdev->dev); + if (ret) { + dev_err(&pdev->dev, "core reset failed %d\n", ret); + return; + } + + /* Start PCIe core clocks */ + clk_prepare_enable(pcie->clk); + + version_id = readl_relaxed(pcie->base + PCI_CONFIG_VERSION_DEVICEID); + dev_info(&pdev->dev, "PCIe version/deviceID 0x%x\n", version_id); + + if (version_id != VERSION_ID_MAGIC) { + dev_info(&pdev->dev, "PCIe controller not found\n"); + pcie->haslink = 0; + return; + } + + /* allow entry to L23 state */ + oxnas_register_set_mask(pcie->pcie_ctrl, PCIE_READY_ENTR_L23); + + /* Set PCIe core into RootCore mode */ + oxnas_register_value_mask(pcie->pcie_ctrl, PCIE_DEVICE_TYPE_MASK, + PCIE_DEVICE_TYPE_ROOT); + wmb(); + + /* Bring up the PCI core */ + oxnas_register_set_mask(pcie->pcie_ctrl, PCIE_LTSSM); + wmb(); +} + +static int __init oxnas_pcie_probe(struct platform_device *pdev) +{ + struct oxnas_pcie *pcie; + struct device_node *np = pdev->dev.of_node; + int ret; + + pcie = devm_kzalloc(&pdev->dev, sizeof(struct oxnas_pcie), + GFP_KERNEL); + if (!pcie) + return -ENOMEM; + + pcie->pdev = pdev; + pcie->haslink = 1; + spin_lock_init(&pcie->lock); + + ret = oxnas_pcie_init_res(pdev, pcie, np); + if (ret) + return ret; + if (pcie->card_reset >= 0) { + ret = gpio_request_one(pcie->card_reset, GPIOF_DIR_IN, + dev_name(&pdev->dev)); + if (ret) { + dev_err(&pdev->dev, "cannot request gpio pin %d\n", + pcie->card_reset); + return ret; + } + } + + ret = oxnas_pcie_map_registers(pdev, np, pcie); + if (ret) { + dev_err(&pdev->dev, "cannot map registers\n"); + goto err_free_gpio; + } + + ret = oxnas_pcie_shared_init(pdev); + if (ret) + goto err_free_gpio; + + /* if hw not found, haslink cleared */ + oxnas_pcie_init_hw(pdev, pcie); + + if (pcie->haslink && oxnas_pcie_link_up(pcie)) { + pcie->haslink = 1; + dev_info(&pdev->dev, "link up\n"); + } else { + pcie->haslink = 0; + dev_info(&pdev->dev, "link down\n"); + } + /* should we register our controller even when pcie->haslink is 0 ? */ + /* register the controller with framework */ + oxnas_pcie_enable(&pdev->dev, pcie); + + return 0; + +err_free_gpio: + if (pcie->card_reset) + gpio_free(pcie->card_reset); + + return ret; +} + +static const struct of_device_id oxnas_pcie_of_match_table[] = { + { .compatible = "plxtech,nas782x-pcie", }, + {}, +}; +MODULE_DEVICE_TABLE(of, oxnas_pcie_of_match_table); + +static struct platform_driver oxnas_pcie_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "oxnas-pcie", + .of_match_table = + of_match_ptr(oxnas_pcie_of_match_table), + }, +}; + +static int __init oxnas_pcie_init(void) +{ + return platform_driver_probe(&oxnas_pcie_driver, + oxnas_pcie_probe); +} + +subsys_initcall(oxnas_pcie_init); + +MODULE_AUTHOR("Ma Haijun <mahaijuns@gmail.com>"); +MODULE_DESCRIPTION("NAS782x PCIe driver"); +MODULE_LICENSE("GPLv2"); diff --git a/target/linux/oxnas/files/drivers/pinctrl/pinctrl-oxnas.c b/target/linux/oxnas/files/drivers/pinctrl/pinctrl-oxnas.c new file mode 100644 index 0000000..6cc8f72 --- /dev/null +++ b/target/linux/oxnas/files/drivers/pinctrl/pinctrl-oxnas.c @@ -0,0 +1,1480 @@ +/* + * oxnas pinctrl driver based on at91 pinctrl driver + * + * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Under GPLv2 only + */ +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/version.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> +/* Since we request GPIOs from ourself */ +#include <linux/pinctrl/consumer.h> + +#include "core.h" + +#include <mach/utils.h> + +#define MAX_NB_GPIO_PER_BANK 32 +#define MAX_GPIO_BANKS 2 + +struct oxnas_gpio_chip { + struct gpio_chip chip; + struct pinctrl_gpio_range range; + void __iomem *regbase; /* GPIOA/B virtual address */ + void __iomem *ctrlbase; /* SYS/SEC_CTRL virtual address */ + struct irq_domain *domain; /* associated irq domain */ +}; + +#define to_oxnas_gpio_chip(c) container_of(c, struct oxnas_gpio_chip, chip) + +static struct oxnas_gpio_chip *gpio_chips[MAX_GPIO_BANKS]; + +static int gpio_banks; + +#define PULL_UP (1 << 0) +#define PULL_DOWN (1 << 1) +#define DEBOUNCE (1 << 2) + +/** + * struct oxnas_pmx_func - describes pinmux functions + * @name: the name of this specific function + * @groups: corresponding pin groups + * @ngroups: the number of groups + */ +struct oxnas_pmx_func { + const char *name; + const char **groups; + unsigned ngroups; +}; + +enum oxnas_mux { + OXNAS_PINMUX_GPIO, + OXNAS_PINMUX_FUNC2, + OXNAS_PINMUX_FUNC3, + OXNAS_PINMUX_FUNC4, + OXNAS_PINMUX_DEBUG, + OXNAS_PINMUX_ALT, +}; + +enum { + INPUT_VALUE = 0, + OUTPUT_ENABLE = 4, + IRQ_PENDING = 0xC, + OUTPUT_VALUE = 0x10, + OUTPUT_SET = 0x14, + OUTPUT_CLEAR = 0x18, + OUTPUT_EN_SET = 0x1C, + OUTPUT_EN_CLEAR = 0x20, + DEBOUNCE_ENABLE = 0x24, + RE_IRQ_ENABLE = 0x28, /* rising edge */ + FE_IRQ_ENABLE = 0x2C, /* falling edge */ + RE_IRQ_PENDING = 0x30, /* rising edge */ + FE_IRQ_PENDING = 0x34, /* falling edge */ + CLOCK_DIV = 0x48, + PULL_ENABLE = 0x50, + PULL_SENSE = 0x54, /* 1 up, 0 down */ + + + DEBOUNCE_MASK = 0x3FFF0000, + /* put hw debounce and soft config at same bit position*/ + DEBOUNCE_SHIFT = 16 +}; + +enum { + PINMUX_SECONDARY_SEL = 0x14, + PINMUX_TERTIARY_SEL = 0x8c, + PINMUX_QUATERNARY_SEL = 0x94, + PINMUX_DEBUG_SEL = 0x9c, + PINMUX_ALTERNATIVE_SEL = 0xa4, + PINMUX_PULLUP_SEL = 0xac, +}; + +/** + * struct oxnas_pmx_pin - describes an pin mux + * @bank: the bank of the pin + * @pin: the pin number in the @bank + * @mux: the mux mode : gpio or periph_x of the pin i.e. alternate function. + * @conf: the configuration of the pin: PULL_UP, MULTIDRIVE etc... + */ +struct oxnas_pmx_pin { + uint32_t bank; + uint32_t pin; + enum oxnas_mux mux; + unsigned long conf; +}; + +/** + * struct oxnas_pin_group - describes an pin group + * @name: the name of this specific pin group + * @pins_conf: the mux mode for each pin in this group. The size of this + * array is the same as pins. + * @pins: an array of discrete physical pins used in this group, taken + * from the driver-local pin enumeration space + * @npins: the number of pins in this group array, i.e. the number of + * elements in .pins so we can iterate over that array + */ +struct oxnas_pin_group { + const char *name; + struct oxnas_pmx_pin *pins_conf; + unsigned int *pins; + unsigned npins; +}; + +struct oxnas_pinctrl { + struct device *dev; + struct pinctrl_dev *pctl; + + int nbanks; + + uint32_t *mux_mask; + int nmux; + + struct oxnas_pmx_func *functions; + int nfunctions; + + struct oxnas_pin_group *groups; + int ngroups; +}; + +static const inline struct oxnas_pin_group *oxnas_pinctrl_find_group_by_name( + const struct oxnas_pinctrl *info, + const char *name) +{ + const struct oxnas_pin_group *grp = NULL; + int i; + + for (i = 0; i < info->ngroups; i++) { + if (strcmp(info->groups[i].name, name)) + continue; + + grp = &info->groups[i]; + dev_dbg(info->dev, "%s: %d 0:%d\n", name, grp->npins, + grp->pins[0]); + break; + } + + return grp; +} + +static int oxnas_get_groups_count(struct pinctrl_dev *pctldev) +{ + struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + return info->ngroups; +} + +static const char *oxnas_get_group_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + return info->groups[selector].name; +} + +static int oxnas_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector, + const unsigned **pins, + unsigned *npins) +{ + struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + if (selector >= info->ngroups) + return -EINVAL; + + *pins = info->groups[selector].pins; + *npins = info->groups[selector].npins; + + return 0; +} + +static void oxnas_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s, + unsigned offset) +{ + seq_printf(s, "%s", dev_name(pctldev->dev)); +} + +static int oxnas_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np, + struct pinctrl_map **map, unsigned *num_maps) +{ + struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + const struct oxnas_pin_group *grp; + struct pinctrl_map *new_map; + struct device_node *parent; + int map_num = 1; + int i; + + /* + * first find the group of this node and check if we need create + * config maps for pins + */ + grp = oxnas_pinctrl_find_group_by_name(info, np->name); + if (!grp) { + dev_err(info->dev, "unable to find group for node %s\n", + np->name); + return -EINVAL; + } + + map_num += grp->npins; + new_map = devm_kzalloc(pctldev->dev, sizeof(*new_map) * map_num, + GFP_KERNEL); + if (!new_map) + return -ENOMEM; + + *map = new_map; + *num_maps = map_num; + + /* create mux map */ + parent = of_get_parent(np); + if (!parent) { + devm_kfree(pctldev->dev, new_map); + return -EINVAL; + } + new_map[0].type = PIN_MAP_TYPE_MUX_GROUP; + new_map[0].data.mux.function = parent->name; + new_map[0].data.mux.group = np->name; + of_node_put(parent); + + /* create config map */ + new_map++; + for (i = 0; i < grp->npins; i++) { + new_map[i].type = PIN_MAP_TYPE_CONFIGS_PIN; + new_map[i].data.configs.group_or_pin = + pin_get_name(pctldev, grp->pins[i]); + new_map[i].data.configs.configs = &grp->pins_conf[i].conf; + new_map[i].data.configs.num_configs = 1; + } + + dev_dbg(pctldev->dev, "maps: function %s group %s num %d\n", + (*map)->data.mux.function, (*map)->data.mux.group, map_num); + + return 0; +} + +static void oxnas_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, unsigned num_maps) +{ +} + +static const struct pinctrl_ops oxnas_pctrl_ops = { + .get_groups_count = oxnas_get_groups_count, + .get_group_name = oxnas_get_group_name, + .get_group_pins = oxnas_get_group_pins, + .pin_dbg_show = oxnas_pin_dbg_show, + .dt_node_to_map = oxnas_dt_node_to_map, + .dt_free_map = oxnas_dt_free_map, +}; + +static void __iomem *pin_to_gpioctrl(struct oxnas_pinctrl *info, + unsigned int bank) +{ + return gpio_chips[bank]->regbase; +} + +static void __iomem *pin_to_muxctrl(struct oxnas_pinctrl *info, + unsigned int bank) +{ + return gpio_chips[bank]->ctrlbase; +} + + +static inline int pin_to_bank(unsigned pin) +{ + return pin / MAX_NB_GPIO_PER_BANK; +} + +static unsigned pin_to_mask(unsigned int pin) +{ + return 1 << pin; +} + +static void oxnas_mux_disable_interrupt(void __iomem *pio, unsigned mask) +{ + oxnas_register_clear_mask(pio + RE_IRQ_ENABLE, mask); + oxnas_register_clear_mask(pio + FE_IRQ_ENABLE, mask); +} + +static unsigned oxnas_mux_get_pullup(void __iomem *pio, unsigned pin) +{ + return (readl_relaxed(pio + PULL_ENABLE) & BIT(pin)) && + (readl_relaxed(pio + PULL_SENSE) & BIT(pin)); +} + +static void oxnas_mux_set_pullup(void __iomem *pio, unsigned mask, bool on) +{ + if (on) { + oxnas_register_set_mask(pio + PULL_SENSE, mask); + oxnas_register_set_mask(pio + PULL_ENABLE, mask); + } else { + oxnas_register_clear_mask(pio + PULL_ENABLE, mask); + } +} + +static bool oxnas_mux_get_pulldown(void __iomem *pio, unsigned pin) +{ + return (readl_relaxed(pio + PULL_ENABLE) & BIT(pin)) && + (!(readl_relaxed(pio + PULL_SENSE) & BIT(pin))); +} + +static void oxnas_mux_set_pulldown(void __iomem *pio, unsigned mask, bool on) +{ + if (on) { + oxnas_register_clear_mask(pio + PULL_SENSE, mask); + oxnas_register_set_mask(pio + PULL_ENABLE, mask); + } else { + oxnas_register_clear_mask(pio + PULL_ENABLE, mask); + }; +} + +/* unfortunately debounce control are shared */ +static bool oxnas_mux_get_debounce(void __iomem *pio, unsigned pin, u32 *div) +{ + *div = __raw_readl(pio + CLOCK_DIV) & DEBOUNCE_MASK; + return __raw_readl(pio + DEBOUNCE_ENABLE) & BIT(pin); +} + +static void oxnas_mux_set_debounce(void __iomem *pio, unsigned mask, + bool is_on, u32 div) +{ + if (is_on) { + oxnas_register_value_mask(pio + CLOCK_DIV, DEBOUNCE_MASK, div); + oxnas_register_set_mask(pio + DEBOUNCE_ENABLE, mask); + } else { + oxnas_register_clear_mask(pio + DEBOUNCE_ENABLE, mask); + } +} + + +static void oxnas_mux_set_func2(void __iomem *cio, unsigned mask) +{ +/* in fact, SECONDARY takes precedence, so clear others is not necessary */ + oxnas_register_set_mask(cio + PINMUX_SECONDARY_SEL, mask); + oxnas_register_clear_mask(cio + PINMUX_TERTIARY_SEL, mask); + oxnas_register_clear_mask(cio + PINMUX_QUATERNARY_SEL, mask); + oxnas_register_clear_mask(cio + PINMUX_DEBUG_SEL, mask); + oxnas_register_clear_mask(cio + PINMUX_ALTERNATIVE_SEL, mask); +} + +static void oxnas_mux_set_func3(void __iomem *cio, unsigned mask) +{ + oxnas_register_clear_mask(cio + PINMUX_SECONDARY_SEL, mask); + oxnas_register_set_mask(cio + PINMUX_TERTIARY_SEL, mask); + oxnas_register_clear_mask(cio + PINMUX_QUATERNARY_SEL, mask); + oxnas_register_clear_mask(cio + PINMUX_DEBUG_SEL, mask); + oxnas_register_clear_mask(cio + PINMUX_ALTERNATIVE_SEL, mask); +} + +static void oxnas_mux_set_func4(void __iomem *cio, unsigned mask) +{ + oxnas_register_clear_mask(cio + PINMUX_SECONDARY_SEL, mask); + oxnas_register_clear_mask(cio + PINMUX_TERTIARY_SEL, mask); + oxnas_register_set_mask(cio + PINMUX_QUATERNARY_SEL, mask); + oxnas_register_clear_mask(cio + PINMUX_DEBUG_SEL, mask); + oxnas_register_clear_mask(cio + PINMUX_ALTERNATIVE_SEL, mask); +} + +static void oxnas_mux_set_func_dbg(void __iomem *cio, unsigned mask) +{ + oxnas_register_clear_mask(cio + PINMUX_SECONDARY_SEL, mask); + oxnas_register_clear_mask(cio + PINMUX_TERTIARY_SEL, mask); + oxnas_register_clear_mask(cio + PINMUX_QUATERNARY_SEL, mask); + oxnas_register_set_mask(cio + PINMUX_DEBUG_SEL, mask); + oxnas_register_clear_mask(cio + PINMUX_ALTERNATIVE_SEL, mask); +} + +static void oxnas_mux_set_func_alt(void __iomem *cio, unsigned mask) +{ + oxnas_register_clear_mask(cio + PINMUX_SECONDARY_SEL, mask); + oxnas_register_clear_mask(cio + PINMUX_TERTIARY_SEL, mask); + oxnas_register_clear_mask(cio + PINMUX_QUATERNARY_SEL, mask); + oxnas_register_clear_mask(cio + PINMUX_DEBUG_SEL, mask); + oxnas_register_set_mask(cio + PINMUX_ALTERNATIVE_SEL, mask); +} + +static void oxnas_mux_set_gpio(void __iomem *cio, unsigned mask) +{ + oxnas_register_clear_mask(cio + PINMUX_SECONDARY_SEL, mask); + oxnas_register_clear_mask(cio + PINMUX_TERTIARY_SEL, mask); + oxnas_register_clear_mask(cio + PINMUX_QUATERNARY_SEL, mask); + oxnas_register_clear_mask(cio + PINMUX_DEBUG_SEL, mask); + oxnas_register_clear_mask(cio + PINMUX_ALTERNATIVE_SEL, mask); +} + +static enum oxnas_mux oxnas_mux_get_func(void __iomem *cio, unsigned mask) +{ + if (readl_relaxed(cio + PINMUX_SECONDARY_SEL) & mask) + return OXNAS_PINMUX_FUNC2; + if (readl_relaxed(cio + PINMUX_TERTIARY_SEL) & mask) + return OXNAS_PINMUX_FUNC3; + if (readl_relaxed(cio + PINMUX_QUATERNARY_SEL) & mask) + return OXNAS_PINMUX_FUNC4; + if (readl_relaxed(cio + PINMUX_DEBUG_SEL) & mask) + return OXNAS_PINMUX_DEBUG; + if (readl_relaxed(cio + PINMUX_ALTERNATIVE_SEL) & mask) + return OXNAS_PINMUX_ALT; + return OXNAS_PINMUX_GPIO; +} + + +static void oxnas_pin_dbg(const struct device *dev, + const struct oxnas_pmx_pin *pin) +{ + if (pin->mux) { + dev_dbg(dev, + "MF_%c%d configured as periph%c with conf = 0x%lu\n", + pin->bank + 'A', pin->pin, pin->mux - 1 + 'A', + pin->conf); + } else { + dev_dbg(dev, "MF_%c%d configured as gpio with conf = 0x%lu\n", + pin->bank + 'A', pin->pin, pin->conf); + } +} + +static int pin_check_config(struct oxnas_pinctrl *info, const char *name, + int index, const struct oxnas_pmx_pin *pin) +{ + int mux; + + /* check if it's a valid config */ + if (pin->bank >= info->nbanks) { + dev_err(info->dev, "%s: pin conf %d bank_id %d >= nbanks %d\n", + name, index, pin->bank, info->nbanks); + return -EINVAL; + } + + if (pin->pin >= MAX_NB_GPIO_PER_BANK) { + dev_err(info->dev, "%s: pin conf %d pin_bank_id %d >= %d\n", + name, index, pin->pin, MAX_NB_GPIO_PER_BANK); + return -EINVAL; + } + /* gpio always allowed */ + if (!pin->mux) + return 0; + + mux = pin->mux - 1; + + if (mux >= info->nmux) { + dev_err(info->dev, "%s: pin conf %d mux_id %d >= nmux %d\n", + name, index, mux, info->nmux); + return -EINVAL; + } + + if (!(info->mux_mask[pin->bank * info->nmux + mux] & 1 << pin->pin)) { + dev_err(info->dev, "%s: pin conf %d mux_id %d not supported for MF_%c%d\n", + name, index, mux, pin->bank + 'A', pin->pin); + return -EINVAL; + } + + return 0; +} + +static void oxnas_mux_gpio_enable(void __iomem *cio, void __iomem *pio, + unsigned mask, bool input) +{ + oxnas_mux_set_gpio(cio, mask); + if (input) + writel_relaxed(mask, pio + OUTPUT_EN_CLEAR); + else + writel_relaxed(mask, pio + OUTPUT_EN_SET); +} + +static void oxnas_mux_gpio_disable(void __iomem *cio, void __iomem *pio, + unsigned mask) +{ + /* when switch to other function, gpio is disabled automatically */ + return; +} + +static int oxnas_pmx_set_mux(struct pinctrl_dev *pctldev, unsigned selector, + unsigned group) +{ + struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + const struct oxnas_pmx_pin *pins_conf = info->groups[group].pins_conf; + const struct oxnas_pmx_pin *pin; + uint32_t npins = info->groups[group].npins; + int i, ret; + unsigned mask; + void __iomem *pio; + void __iomem *cio; + + dev_dbg(info->dev, "enable function %s group %s\n", + info->functions[selector].name, info->groups[group].name); + + /* first check that all the pins of the group are valid with a valid + * paramter */ + for (i = 0; i < npins; i++) { + pin = &pins_conf[i]; + ret = pin_check_config(info, info->groups[group].name, i, pin); + if (ret) + return ret; + } + + for (i = 0; i < npins; i++) { + pin = &pins_conf[i]; + oxnas_pin_dbg(info->dev, pin); + + pio = pin_to_gpioctrl(info, pin->bank); + cio = pin_to_muxctrl(info, pin->bank); + + mask = pin_to_mask(pin->pin); + oxnas_mux_disable_interrupt(pio, mask); + + switch (pin->mux) { + case OXNAS_PINMUX_GPIO: + oxnas_mux_gpio_enable(cio, pio, mask, 1); + break; + case OXNAS_PINMUX_FUNC2: + oxnas_mux_set_func2(cio, mask); + break; + case OXNAS_PINMUX_FUNC3: + oxnas_mux_set_func3(cio, mask); + break; + case OXNAS_PINMUX_FUNC4: + oxnas_mux_set_func4(cio, mask); + break; + case OXNAS_PINMUX_DEBUG: + oxnas_mux_set_func_dbg(cio, mask); + break; + case OXNAS_PINMUX_ALT: + oxnas_mux_set_func_alt(cio, mask); + break; + } + if (pin->mux) + oxnas_mux_gpio_disable(cio, pio, mask); + } + + return 0; +} + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(3, 16, 0)) +static void oxnas_pmx_disable(struct pinctrl_dev *pctldev, unsigned selector, + unsigned group) +{ + struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + const struct oxnas_pmx_pin *pins_conf = info->groups[group].pins_conf; + const struct oxnas_pmx_pin *pin; + uint32_t npins = info->groups[group].npins; + int i; + unsigned mask; + void __iomem *pio; + void __iomem *cio; + + for (i = 0; i < npins; i++) { + pin = &pins_conf[i]; + oxnas_pin_dbg(info->dev, pin); + pio = pin_to_gpioctrl(info, pin->bank); + cio = pin_to_muxctrl(info, pin->bank); + mask = pin_to_mask(pin->pin); + oxnas_mux_gpio_enable(cio, pio, mask, 1); + } +} +#endif + +static int oxnas_pmx_get_funcs_count(struct pinctrl_dev *pctldev) +{ + struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + return info->nfunctions; +} + +static const char *oxnas_pmx_get_func_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + return info->functions[selector].name; +} + +static int oxnas_pmx_get_groups(struct pinctrl_dev *pctldev, unsigned selector, + const char * const **groups, + unsigned * const num_groups) +{ + struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + *groups = info->functions[selector].groups; + *num_groups = info->functions[selector].ngroups; + + return 0; +} + +static int oxnas_gpio_request_enable(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned offset) +{ + struct oxnas_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); + struct oxnas_gpio_chip *oxnas_chip; + struct gpio_chip *chip; + unsigned mask; + + if (!range) { + dev_err(npct->dev, "invalid range\n"); + return -EINVAL; + } + if (!range->gc) { + dev_err(npct->dev, "missing GPIO chip in range\n"); + return -EINVAL; + } + chip = range->gc; + oxnas_chip = container_of(chip, struct oxnas_gpio_chip, chip); + + dev_dbg(npct->dev, "enable pin %u as GPIO\n", offset); + + mask = 1 << (offset - chip->base); + + dev_dbg(npct->dev, "enable pin %u as MF_%c%d 0x%x\n", + offset, 'A' + range->id, offset - chip->base, mask); + + oxnas_mux_set_gpio(oxnas_chip->ctrlbase, mask); + + return 0; +} + +static void oxnas_gpio_disable_free(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned offset) +{ + struct oxnas_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); + + dev_dbg(npct->dev, "disable pin %u as GPIO\n", offset); + /* Set the pin to some default state, GPIO is usually default */ +} + +static const struct pinmux_ops oxnas_pmx_ops = { + .get_functions_count = oxnas_pmx_get_funcs_count, + .get_function_name = oxnas_pmx_get_func_name, + .get_function_groups = oxnas_pmx_get_groups, +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 18, 0)) + .set_mux = oxnas_pmx_set_mux, +#else + .enable = oxnas_pmx_set_mux, +#endif +#if (LINUX_VERSION_CODE < KERNEL_VERSION(3, 16, 0)) + .disable = oxnas_pmx_disable, +#endif + .gpio_request_enable = oxnas_gpio_request_enable, + .gpio_disable_free = oxnas_gpio_disable_free, +}; + +static int oxnas_pinconf_get(struct pinctrl_dev *pctldev, + unsigned pin_id, unsigned long *config) +{ + struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + void __iomem *pio; + unsigned pin; + int div; + + dev_dbg(info->dev, "%s:%d, pin_id=%d, config=0x%lx", __func__, + __LINE__, pin_id, *config); + pio = pin_to_gpioctrl(info, pin_to_bank(pin_id)); + pin = pin_id % MAX_NB_GPIO_PER_BANK; + + if (oxnas_mux_get_pullup(pio, pin)) + *config |= PULL_UP; + + if (oxnas_mux_get_pulldown(pio, pin)) + *config |= PULL_DOWN; + + if (oxnas_mux_get_debounce(pio, pin, &div)) + *config |= DEBOUNCE | div; + return 0; +} + +static int oxnas_pinconf_set(struct pinctrl_dev *pctldev, + unsigned pin_id, unsigned long *configs, + unsigned num_configs) +{ + struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + unsigned mask; + void __iomem *pio; + int i; + unsigned long config; + + pio = pin_to_gpioctrl(info, pin_to_bank(pin_id)); + mask = pin_to_mask(pin_id % MAX_NB_GPIO_PER_BANK); + + for (i = 0; i < num_configs; i++) { + config = configs[i]; + + dev_dbg(info->dev, + "%s:%d, pin_id=%d, config=0x%lx", + __func__, __LINE__, pin_id, config); + + if ((config & PULL_UP) && (config & PULL_DOWN)) + return -EINVAL; + + oxnas_mux_set_pullup(pio, mask, config & PULL_UP); + oxnas_mux_set_pulldown(pio, mask, config & PULL_DOWN); + oxnas_mux_set_debounce(pio, mask, config & DEBOUNCE, + config & DEBOUNCE_MASK); + + } /* for each config */ + + return 0; +} + +static void oxnas_pinconf_dbg_show(struct pinctrl_dev *pctldev, + struct seq_file *s, unsigned pin_id) +{ + +} + +static void oxnas_pinconf_group_dbg_show(struct pinctrl_dev *pctldev, + struct seq_file *s, unsigned group) +{ +} + +static const struct pinconf_ops oxnas_pinconf_ops = { + .pin_config_get = oxnas_pinconf_get, + .pin_config_set = oxnas_pinconf_set, + .pin_config_dbg_show = oxnas_pinconf_dbg_show, + .pin_config_group_dbg_show = oxnas_pinconf_group_dbg_show, +}; + +static struct pinctrl_desc oxnas_pinctrl_desc = { + .pctlops = &oxnas_pctrl_ops, + .pmxops = &oxnas_pmx_ops, + .confops = &oxnas_pinconf_ops, + .owner = THIS_MODULE, +}; + +static const char *gpio_compat = "plxtech,nas782x-gpio"; + +static void oxnas_pinctrl_child_count(struct oxnas_pinctrl *info, + struct device_node *np) +{ + struct device_node *child; + + for_each_child_of_node(np, child) { + if (of_device_is_compatible(child, gpio_compat)) { + info->nbanks++; + } else { + info->nfunctions++; + info->ngroups += of_get_child_count(child); + } + } +} + +static int oxnas_pinctrl_mux_mask(struct oxnas_pinctrl *info, + struct device_node *np) +{ + int ret = 0; + int size; + const __be32 *list; + + list = of_get_property(np, "plxtech,mux-mask", &size); + if (!list) { + dev_err(info->dev, "can not read the mux-mask of %d\n", size); + return -EINVAL; + } + + size /= sizeof(*list); + if (!size || size % info->nbanks) { + dev_err(info->dev, "wrong mux mask array should be by %d\n", + info->nbanks); + return -EINVAL; + } + info->nmux = size / info->nbanks; + + info->mux_mask = devm_kzalloc(info->dev, sizeof(u32) * size, GFP_KERNEL); + if (!info->mux_mask) { + dev_err(info->dev, "could not alloc mux_mask\n"); + return -ENOMEM; + } + + ret = of_property_read_u32_array(np, "plxtech,mux-mask", + info->mux_mask, size); + if (ret) + dev_err(info->dev, "can not read the mux-mask of %d\n", size); + return ret; +} + +static int oxnas_pinctrl_parse_groups(struct device_node *np, + struct oxnas_pin_group *grp, + struct oxnas_pinctrl *info, u32 index) +{ + struct oxnas_pmx_pin *pin; + int size; + const __be32 *list; + int i, j; + + dev_dbg(info->dev, "group(%d): %s\n", index, np->name); + + /* Initialise group */ + grp->name = np->name; + + /* + * the binding format is plxtech,pins = <bank pin mux CONFIG ...>, + * do sanity check and calculate pins number + */ + list = of_get_property(np, "plxtech,pins", &size); + /* we do not check return since it's safe node passed down */ + size /= sizeof(*list); + if (!size || size % 4) { + dev_err(info->dev, "wrong pins number or pins and configs" + " should be divisible by 4\n"); + return -EINVAL; + } + + grp->npins = size / 4; + pin = grp->pins_conf = devm_kzalloc(info->dev, + grp->npins * sizeof(struct oxnas_pmx_pin), + GFP_KERNEL); + grp->pins = devm_kzalloc(info->dev, grp->npins * sizeof(unsigned int), + GFP_KERNEL); + if (!grp->pins_conf || !grp->pins) + return -ENOMEM; + + for (i = 0, j = 0; i < size; i += 4, j++) { + pin->bank = be32_to_cpu(*list++); + pin->pin = be32_to_cpu(*list++); + grp->pins[j] = pin->bank * MAX_NB_GPIO_PER_BANK + pin->pin; + pin->mux = be32_to_cpu(*list++); + pin->conf = be32_to_cpu(*list++); + + oxnas_pin_dbg(info->dev, pin); + pin++; + } + + return 0; +} + +static int oxnas_pinctrl_parse_functions(struct device_node *np, + struct oxnas_pinctrl *info, u32 index) +{ + struct device_node *child; + struct oxnas_pmx_func *func; + struct oxnas_pin_group *grp; + int ret; + static u32 grp_index; + u32 i = 0; + + dev_dbg(info->dev, "parse function(%d): %s\n", index, np->name); + + func = &info->functions[index]; + + /* Initialise function */ + func->name = np->name; + func->ngroups = of_get_child_count(np); + if (func->ngroups <= 0) { + dev_err(info->dev, "no groups defined\n"); + return -EINVAL; + } + func->groups = devm_kzalloc(info->dev, + func->ngroups * sizeof(char *), GFP_KERNEL); + if (!func->groups) + return -ENOMEM; + + for_each_child_of_node(np, child) { + func->groups[i] = child->name; + grp = &info->groups[grp_index++]; + ret = oxnas_pinctrl_parse_groups(child, grp, info, i++); + if (ret) + return ret; + } + + return 0; +} + +static struct of_device_id oxnas_pinctrl_of_match[] = { + { .compatible = "plxtech,nas782x-pinctrl"}, + { /* sentinel */ } +}; + +static int oxnas_pinctrl_probe_dt(struct platform_device *pdev, + struct oxnas_pinctrl *info) +{ + int ret = 0; + int i, j; + uint32_t *tmp; + struct device_node *np = pdev->dev.of_node; + struct device_node *child; + + if (!np) + return -ENODEV; + + info->dev = &pdev->dev; + + oxnas_pinctrl_child_count(info, np); + + if (info->nbanks < 1) { + dev_err(&pdev->dev, "you need to specify atleast one gpio-controller\n"); + return -EINVAL; + } + + ret = oxnas_pinctrl_mux_mask(info, np); + if (ret) + return ret; + + dev_dbg(&pdev->dev, "nmux = %d\n", info->nmux); + + dev_dbg(&pdev->dev, "mux-mask\n"); + tmp = info->mux_mask; + for (i = 0; i < info->nbanks; i++) + for (j = 0; j < info->nmux; j++, tmp++) + dev_dbg(&pdev->dev, "%d:%d\t0x%x\n", i, j, tmp[0]); + + dev_dbg(&pdev->dev, "nfunctions = %d\n", info->nfunctions); + dev_dbg(&pdev->dev, "ngroups = %d\n", info->ngroups); + info->functions = devm_kzalloc(&pdev->dev, info->nfunctions * + sizeof(struct oxnas_pmx_func), + GFP_KERNEL); + if (!info->functions) + return -ENOMEM; + + info->groups = devm_kzalloc(&pdev->dev, info->ngroups * + sizeof(struct oxnas_pin_group), + GFP_KERNEL); + if (!info->groups) + return -ENOMEM; + + dev_dbg(&pdev->dev, "nbanks = %d\n", info->nbanks); + dev_dbg(&pdev->dev, "nfunctions = %d\n", info->nfunctions); + dev_dbg(&pdev->dev, "ngroups = %d\n", info->ngroups); + + i = 0; + + for_each_child_of_node(np, child) { + if (of_device_is_compatible(child, gpio_compat)) + continue; + ret = oxnas_pinctrl_parse_functions(child, info, i++); + if (ret) { + dev_err(&pdev->dev, "failed to parse function\n"); + return ret; + } + } + + return 0; +} + +static int oxnas_pinctrl_probe(struct platform_device *pdev) +{ + struct oxnas_pinctrl *info; + struct pinctrl_pin_desc *pdesc; + int ret, i, j, k; + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + ret = oxnas_pinctrl_probe_dt(pdev, info); + if (ret) + return ret; + + /* + * We need all the GPIO drivers to probe FIRST, or we will not be able + * to obtain references to the struct gpio_chip * for them, and we + * need this to proceed. + */ + for (i = 0; i < info->nbanks; i++) { + if (!gpio_chips[i]) { + dev_warn(&pdev->dev, + "GPIO chip %d not registered yet\n", i); + devm_kfree(&pdev->dev, info); + return -EPROBE_DEFER; + } + } + + oxnas_pinctrl_desc.name = dev_name(&pdev->dev); + oxnas_pinctrl_desc.npins = info->nbanks * MAX_NB_GPIO_PER_BANK; + oxnas_pinctrl_desc.pins = pdesc = + devm_kzalloc(&pdev->dev, sizeof(*pdesc) * + oxnas_pinctrl_desc.npins, GFP_KERNEL); + + if (!oxnas_pinctrl_desc.pins) + return -ENOMEM; + + for (i = 0 , k = 0; i < info->nbanks; i++) { + for (j = 0; j < MAX_NB_GPIO_PER_BANK; j++, k++) { + pdesc->number = k; + pdesc->name = kasprintf(GFP_KERNEL, "MF_%c%d", i + 'A', + j); + pdesc++; + } + } + + platform_set_drvdata(pdev, info); + info->pctl = pinctrl_register(&oxnas_pinctrl_desc, &pdev->dev, info); + + if (!info->pctl) { + dev_err(&pdev->dev, "could not register OX820 pinctrl driver\n"); + ret = -EINVAL; + goto err; + } + + /* We will handle a range of GPIO pins */ + for (i = 0; i < info->nbanks; i++) + pinctrl_add_gpio_range(info->pctl, &gpio_chips[i]->range); + + dev_info(&pdev->dev, "initialized OX820 pinctrl driver\n"); + + return 0; + +err: + return ret; +} + +static int oxnas_pinctrl_remove(struct platform_device *pdev) +{ + struct oxnas_pinctrl *info = platform_get_drvdata(pdev); + + pinctrl_unregister(info->pctl); + + return 0; +} + +static int oxnas_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + /* + * Map back to global GPIO space and request muxing, the direction + * parameter does not matter for this controller. + */ + int gpio = chip->base + offset; + int bank = chip->base / chip->ngpio; + + dev_dbg(chip->dev, "%s:%d MF_%c%d(%d)\n", __func__, __LINE__, + 'A' + bank, offset, gpio); + + return pinctrl_request_gpio(gpio); +} + +static void oxnas_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + int gpio = chip->base + offset; + + pinctrl_free_gpio(gpio); +} + +static int oxnas_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct oxnas_gpio_chip *oxnas_gpio = to_oxnas_gpio_chip(chip); + void __iomem *pio = oxnas_gpio->regbase; + + writel_relaxed(BIT(offset), pio + OUTPUT_EN_CLEAR); + return 0; +} + +static int oxnas_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct oxnas_gpio_chip *oxnas_gpio = to_oxnas_gpio_chip(chip); + void __iomem *pio = oxnas_gpio->regbase; + unsigned mask = 1 << offset; + u32 pdsr; + + pdsr = readl_relaxed(pio + INPUT_VALUE); + return (pdsr & mask) != 0; +} + +static void oxnas_gpio_set(struct gpio_chip *chip, unsigned offset, + int val) +{ + struct oxnas_gpio_chip *oxnas_gpio = to_oxnas_gpio_chip(chip); + void __iomem *pio = oxnas_gpio->regbase; + + if (val) + writel_relaxed(BIT(offset), pio + OUTPUT_SET); + else + writel_relaxed(BIT(offset), pio + OUTPUT_CLEAR); + +} + +static int oxnas_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int val) +{ + struct oxnas_gpio_chip *oxnas_gpio = to_oxnas_gpio_chip(chip); + void __iomem *pio = oxnas_gpio->regbase; + + if (val) + writel_relaxed(BIT(offset), pio + OUTPUT_SET); + else + writel_relaxed(BIT(offset), pio + OUTPUT_CLEAR); + + writel_relaxed(BIT(offset), pio + OUTPUT_EN_SET); + + return 0; +} + +static int oxnas_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct oxnas_gpio_chip *oxnas_gpio = to_oxnas_gpio_chip(chip); + int virq; + + if (offset < chip->ngpio) + virq = irq_create_mapping(oxnas_gpio->domain, offset); + else + virq = -ENXIO; + + dev_dbg(chip->dev, "%s: request IRQ for GPIO %d, return %d\n", + chip->label, offset + chip->base, virq); + return virq; +} + +#ifdef CONFIG_DEBUG_FS +static void oxnas_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) +{ + enum oxnas_mux mode; + int i; + struct oxnas_gpio_chip *oxnas_gpio = to_oxnas_gpio_chip(chip); + void __iomem *pio = oxnas_gpio->regbase; + void __iomem *cio = oxnas_gpio->ctrlbase; + + for (i = 0; i < chip->ngpio; i++) { + unsigned pin = chip->base + i; + unsigned mask = pin_to_mask(pin); + const char *gpio_label; + u32 pdsr; + + gpio_label = gpiochip_is_requested(chip, i); + if (!gpio_label) + continue; + /* FIXME */ + mode = oxnas_mux_get_func(cio, mask); + seq_printf(s, "[%s] GPIO%s%d: ", + gpio_label, chip->label, i); + if (mode == OXNAS_PINMUX_GPIO) { + pdsr = readl_relaxed(pio + INPUT_VALUE); + + seq_printf(s, "[gpio] %s\n", + pdsr & mask ? + "set" : "clear"); + } else { + seq_printf(s, "[periph %c]\n", + mode + 'A' - 1); + } + } +} +#else +#define oxnas_gpio_dbg_show NULL +#endif + +/* Several AIC controller irqs are dispatched through this GPIO handler. + * To use any AT91_PIN_* as an externally triggered IRQ, first call + * oxnas_set_gpio_input() then maybe enable its glitch filter. + * Then just request_irq() with the pin ID; it works like any ARM IRQ + * handler. + */ + +static void gpio_irq_mask(struct irq_data *d) +{ + struct oxnas_gpio_chip *oxnas_gpio = irq_data_get_irq_chip_data(d); + void __iomem *pio = oxnas_gpio->regbase; + unsigned mask = 1 << d->hwirq; + unsigned type = irqd_get_trigger_type(d); + + /* FIXME: need proper lock */ + if (type & IRQ_TYPE_EDGE_RISING) + oxnas_register_clear_mask(pio + RE_IRQ_ENABLE, mask); + if (type & IRQ_TYPE_EDGE_FALLING) + oxnas_register_clear_mask(pio + FE_IRQ_ENABLE, mask); +} + +static void gpio_irq_unmask(struct irq_data *d) +{ + struct oxnas_gpio_chip *oxnas_gpio = irq_data_get_irq_chip_data(d); + void __iomem *pio = oxnas_gpio->regbase; + unsigned mask = 1 << d->hwirq; + unsigned type = irqd_get_trigger_type(d); + + /* FIXME: need proper lock */ + if (type & IRQ_TYPE_EDGE_RISING) + oxnas_register_set_mask(pio + RE_IRQ_ENABLE, mask); + if (type & IRQ_TYPE_EDGE_FALLING) + oxnas_register_set_mask(pio + FE_IRQ_ENABLE, mask); +} + + +static int gpio_irq_type(struct irq_data *d, unsigned type) +{ + if ((type & IRQ_TYPE_EDGE_BOTH) == 0) { + pr_warn("OX820: Unsupported type for irq %d\n", + gpio_to_irq(d->irq)); + return -EINVAL; + } + /* seems no way to set trigger type without enable irq, so leave it to unmask time */ + + return 0; +} + +static struct irq_chip gpio_irqchip = { + .name = "GPIO", + .irq_disable = gpio_irq_mask, + .irq_mask = gpio_irq_mask, + .irq_unmask = gpio_irq_unmask, + .irq_set_type = gpio_irq_type, +}; + +static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + struct irq_data *idata = irq_desc_get_irq_data(desc); + struct oxnas_gpio_chip *oxnas_gpio = irq_data_get_irq_chip_data(idata); + void __iomem *pio = oxnas_gpio->regbase; + unsigned long isr; + int n; + + chained_irq_enter(chip, desc); + for (;;) { + /* TODO: see if it works */ + isr = readl_relaxed(pio + IRQ_PENDING); + if (!isr) + break; + /* acks pending interrupts */ + writel_relaxed(isr, pio + IRQ_PENDING); + + for_each_set_bit(n, &isr, BITS_PER_LONG) { + generic_handle_irq(irq_find_mapping(oxnas_gpio->domain, + n)); + } + } + chained_irq_exit(chip, desc); + /* now it may re-trigger */ +} + +/* + * This lock class tells lockdep that GPIO irqs are in a different + * category than their parents, so it won't report false recursion. + */ +static struct lock_class_key gpio_lock_class; + +static int oxnas_gpio_irq_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct oxnas_gpio_chip *oxnas_gpio = h->host_data; + + irq_set_lockdep_class(virq, &gpio_lock_class); + + irq_set_chip_and_handler(virq, &gpio_irqchip, handle_edge_irq); + set_irq_flags(virq, IRQF_VALID); + irq_set_chip_data(virq, oxnas_gpio); + + return 0; +} + +static int oxnas_gpio_irq_domain_xlate(struct irq_domain *d, + struct device_node *ctrlr, + const u32 *intspec, + unsigned int intsize, + irq_hw_number_t *out_hwirq, + unsigned int *out_type) +{ + struct oxnas_gpio_chip *oxnas_gpio = d->host_data; + int ret; + int pin = oxnas_gpio->chip.base + intspec[0]; + + if (WARN_ON(intsize < 2)) + return -EINVAL; + *out_hwirq = intspec[0]; + *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK; + + ret = gpio_request(pin, ctrlr->full_name); + if (ret) + return ret; + + ret = gpio_direction_input(pin); + if (ret) + return ret; + + return 0; +} + +static struct irq_domain_ops oxnas_gpio_ops = { + .map = oxnas_gpio_irq_map, + .xlate = oxnas_gpio_irq_domain_xlate, +}; + +static int oxnas_gpio_of_irq_setup(struct device_node *node, + struct oxnas_gpio_chip *oxnas_gpio, + unsigned int irq) +{ + /* Disable irqs of this controller */ + writel_relaxed(0, oxnas_gpio->regbase + RE_IRQ_ENABLE); + writel_relaxed(0, oxnas_gpio->regbase + FE_IRQ_ENABLE); + + /* Setup irq domain */ + oxnas_gpio->domain = irq_domain_add_linear(node, oxnas_gpio->chip.ngpio, + &oxnas_gpio_ops, oxnas_gpio); + if (!oxnas_gpio->domain) + panic("oxnas_gpio: couldn't allocate irq domain (DT).\n"); + + irq_set_chip_data(irq, oxnas_gpio); + irq_set_chained_handler(irq, gpio_irq_handler); + + return 0; +} + +/* This structure is replicated for each GPIO block allocated at probe time */ +static struct gpio_chip oxnas_gpio_template = { + .request = oxnas_gpio_request, + .free = oxnas_gpio_free, + .direction_input = oxnas_gpio_direction_input, + .get = oxnas_gpio_get, + .direction_output = oxnas_gpio_direction_output, + .set = oxnas_gpio_set, + .to_irq = oxnas_gpio_to_irq, + .dbg_show = oxnas_gpio_dbg_show, + .can_sleep = 0, + .ngpio = MAX_NB_GPIO_PER_BANK, +}; + +static struct of_device_id oxnas_gpio_of_match[] = { + { .compatible = "plxtech,nas782x-gpio"}, + { /* sentinel */ } +}; + +static int oxnas_gpio_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct resource *res; + struct oxnas_gpio_chip *oxnas_chip = NULL; + struct gpio_chip *chip; + struct pinctrl_gpio_range *range; + int ret = 0; + int irq, i; + int alias_idx = of_alias_get_id(np, "gpio"); + uint32_t ngpio; + char **names; + + BUG_ON(alias_idx >= ARRAY_SIZE(gpio_chips)); + if (gpio_chips[alias_idx]) { + ret = -EBUSY; + goto err; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = irq; + goto err; + } + + oxnas_chip = devm_kzalloc(&pdev->dev, sizeof(*oxnas_chip), GFP_KERNEL); + if (!oxnas_chip) { + ret = -ENOMEM; + goto err; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + oxnas_chip->regbase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(oxnas_chip->regbase)) { + ret = PTR_ERR(oxnas_chip->regbase); + goto err; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + oxnas_chip->ctrlbase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(oxnas_chip->ctrlbase)) { + ret = PTR_ERR(oxnas_chip->ctrlbase); + goto err; + } + + oxnas_chip->chip = oxnas_gpio_template; + + chip = &oxnas_chip->chip; + chip->of_node = np; + chip->label = dev_name(&pdev->dev); + chip->dev = &pdev->dev; + chip->owner = THIS_MODULE; + chip->base = alias_idx * MAX_NB_GPIO_PER_BANK; + + if (!of_property_read_u32(np, "#gpio-lines", &ngpio)) { + if (ngpio > MAX_NB_GPIO_PER_BANK) + pr_err("oxnas_gpio.%d, gpio-nb >= %d failback to %d\n", + alias_idx, MAX_NB_GPIO_PER_BANK, + MAX_NB_GPIO_PER_BANK); + else + chip->ngpio = ngpio; + } + + names = devm_kzalloc(&pdev->dev, sizeof(char *) * chip->ngpio, + GFP_KERNEL); + + if (!names) { + ret = -ENOMEM; + goto err; + } + + for (i = 0; i < chip->ngpio; i++) + names[i] = kasprintf(GFP_KERNEL, "MF_%c%d", alias_idx + 'A', i); + + chip->names = (const char *const *)names; + + range = &oxnas_chip->range; + range->name = chip->label; + range->id = alias_idx; + range->pin_base = range->base = range->id * MAX_NB_GPIO_PER_BANK; + + range->npins = chip->ngpio; + range->gc = chip; + + ret = gpiochip_add(chip); + if (ret) + goto err; + + gpio_chips[alias_idx] = oxnas_chip; + gpio_banks = max(gpio_banks, alias_idx + 1); + + oxnas_gpio_of_irq_setup(np, oxnas_chip, irq); + + dev_info(&pdev->dev, "at address %p\n", oxnas_chip->regbase); + + return 0; +err: + dev_err(&pdev->dev, "Failure %i for GPIO %i\n", ret, alias_idx); + + return ret; +} + +static struct platform_driver oxnas_gpio_driver = { + .driver = { + .name = "gpio-oxnas", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(oxnas_gpio_of_match), + }, + .probe = oxnas_gpio_probe, +}; + +static struct platform_driver oxnas_pinctrl_driver = { + .driver = { + .name = "pinctrl-oxnas", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(oxnas_pinctrl_of_match), + }, + .probe = oxnas_pinctrl_probe, + .remove = oxnas_pinctrl_remove, +}; + +static int __init oxnas_pinctrl_init(void) +{ + int ret; + + ret = platform_driver_register(&oxnas_gpio_driver); + if (ret) + return ret; + return platform_driver_register(&oxnas_pinctrl_driver); +} +arch_initcall(oxnas_pinctrl_init); + +static void __exit oxnas_pinctrl_exit(void) +{ + platform_driver_unregister(&oxnas_pinctrl_driver); +} + +module_exit(oxnas_pinctrl_exit); +MODULE_AUTHOR("Ma Hajun <mahaijuns@gmail.com>"); +MODULE_DESCRIPTION("Plxtech Nas782x pinctrl driver"); +MODULE_LICENSE("GPL v2"); diff --git a/target/linux/oxnas/files/drivers/reset/reset-ox820.c b/target/linux/oxnas/files/drivers/reset/reset-ox820.c new file mode 100644 index 0000000..0a28de5 --- /dev/null +++ b/target/linux/oxnas/files/drivers/reset/reset-ox820.c @@ -0,0 +1,107 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/reset-controller.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <mach/hardware.h> + +static int ox820_reset_reset(struct reset_controller_dev *rcdev, + unsigned long id) +{ + writel(BIT(id), SYS_CTRL_RST_SET_CTRL); + writel(BIT(id), SYS_CTRL_RST_CLR_CTRL); + return 0; +} + +static int ox820_reset_assert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + writel(BIT(id), SYS_CTRL_RST_SET_CTRL); + + return 0; +} + +static int ox820_reset_deassert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + writel(BIT(id), SYS_CTRL_RST_CLR_CTRL); + + return 0; +} + +static struct reset_control_ops ox820_reset_ops = { + .reset = ox820_reset_reset, + .assert = ox820_reset_assert, + .deassert = ox820_reset_deassert, +}; + +static const struct of_device_id ox820_reset_dt_ids[] = { + { .compatible = "plxtech,nas782x-reset", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, ox820_reset_dt_ids); + +struct reset_controller_dev rcdev; + +static int ox820_reset_probe(struct platform_device *pdev) +{ + struct reset_controller_dev *rcdev; + + rcdev = devm_kzalloc(&pdev->dev, sizeof(*rcdev), GFP_KERNEL); + if (!rcdev) + return -ENOMEM; + + /* note: reset controller is statically mapped */ + + rcdev->owner = THIS_MODULE; + rcdev->nr_resets = 32; + rcdev->ops = &ox820_reset_ops; + rcdev->of_node = pdev->dev.of_node; + reset_controller_register(rcdev); + platform_set_drvdata(pdev, rcdev); + + return 0; +} + +static int ox820_reset_remove(struct platform_device *pdev) +{ + struct reset_controller_dev *rcdev = platform_get_drvdata(pdev); + + reset_controller_unregister(rcdev); + + return 0; +} + +static struct platform_driver ox820_reset_driver = { + .probe = ox820_reset_probe, + .remove = ox820_reset_remove, + .driver = { + .name = "ox820-reset", + .owner = THIS_MODULE, + .of_match_table = ox820_reset_dt_ids, + }, +}; + +static int __init ox820_reset_init(void) +{ + return platform_driver_probe(&ox820_reset_driver, + ox820_reset_probe); +} +/* + * reset controller does not support probe deferral, so it has to be + * initialized before any user, in particular, PCIE uses subsys_initcall. + */ +arch_initcall(ox820_reset_init); + +MODULE_AUTHOR("Ma Haijun"); +MODULE_LICENSE("GPL"); diff --git a/target/linux/oxnas/files/drivers/usb/host/ehci-oxnas.c b/target/linux/oxnas/files/drivers/usb/host/ehci-oxnas.c new file mode 100644 index 0000000..23c5061 --- /dev/null +++ b/target/linux/oxnas/files/drivers/usb/host/ehci-oxnas.c @@ -0,0 +1,316 @@ +/* + * drivers/usb/host/ehci-oxnas.c + * + * Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> +#include <linux/dma-mapping.h> +#include <linux/clk.h> +#include <linux/reset.h> +#include <mach/hardware.h> +#include <mach/utils.h> + +#include "ehci.h" + +struct oxnas_hcd { + struct clk *clk; + struct clk *refsrc; + struct clk *phyref; + int use_pllb; + int use_phya; + struct reset_control *rst_host; + struct reset_control *rst_phya; + struct reset_control *rst_phyb; +}; + +#define DRIVER_DESC "Oxnas On-Chip EHCI Host Controller" + +static struct hc_driver __read_mostly oxnas_hc_driver; + +static void start_oxnas_usb_ehci(struct oxnas_hcd *oxnas) +{ + u32 reg; + + if (oxnas->use_pllb) { + /* enable pllb */ + clk_prepare_enable(oxnas->refsrc); + /* enable ref600 */ + clk_prepare_enable(oxnas->phyref); + /* 600MHz pllb divider for 12MHz */ + writel(PLLB_DIV_INT(50) | PLLB_DIV_FRAC(0), + SEC_CTRL_PLLB_DIV_CTRL); + + } else { + /* ref 300 divider for 12MHz */ + writel(REF300_DIV_INT(25) | REF300_DIV_FRAC(0), + SYS_CTRL_REF300_DIV); + } + + /* Ensure the USB block is properly reset */ + reset_control_reset(oxnas->rst_host); + reset_control_reset(oxnas->rst_phya); + reset_control_reset(oxnas->rst_phyb); + + /* Force the high speed clock to be generated all the time, via serial + programming of the USB HS PHY */ + writel((2UL << USBHSPHY_TEST_ADD) | + (0xe0UL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL); + + writel((1UL << USBHSPHY_TEST_CLK) | + (2UL << USBHSPHY_TEST_ADD) | + (0xe0UL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL); + + writel((0xfUL << USBHSPHY_TEST_ADD) | + (0xaaUL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL); + + writel((1UL << USBHSPHY_TEST_CLK) | + (0xfUL << USBHSPHY_TEST_ADD) | + (0xaaUL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL); + + if (oxnas->use_pllb) /* use pllb clock */ + writel(USB_CLK_INTERNAL | USB_INT_CLK_PLLB, SYS_CTRL_USB_CTRL); + else /* use ref300 derived clock */ + writel(USB_CLK_INTERNAL | USB_INT_CLK_REF300, + SYS_CTRL_USB_CTRL); + + if (oxnas->use_phya) { + /* Configure USB PHYA as a host */ + reg = readl(SYS_CTRL_USB_CTRL); + reg &= ~USBAMUX_DEVICE; + writel(reg, SYS_CTRL_USB_CTRL); + } + + /* Enable the clock to the USB block */ + clk_prepare_enable(oxnas->clk); +} + +static void stop_oxnas_usb_ehci(struct oxnas_hcd *oxnas) +{ + reset_control_assert(oxnas->rst_host); + reset_control_assert(oxnas->rst_phya); + reset_control_assert(oxnas->rst_phyb); + + if (oxnas->use_pllb) { + clk_disable_unprepare(oxnas->phyref); + clk_disable_unprepare(oxnas->refsrc); + } + clk_disable_unprepare(oxnas->clk); +} + +static int ehci_oxnas_reset(struct usb_hcd *hcd) +{ + #define txttfill_tuning reserved2[0] + + struct ehci_hcd *ehci; + u32 tmp; + int retval = ehci_setup(hcd); + if (retval) + return retval; + + ehci = hcd_to_ehci(hcd); + tmp = ehci_readl(ehci, &ehci->regs->txfill_tuning); + tmp &= ~0x00ff0000; + tmp |= 0x003f0000; /* set burst pre load count to 0x40 (63 * 4 bytes) */ + tmp |= 0x16; /* set sheduler overhead to 22 * 1.267us (HS) or 22 * 6.33us (FS/LS)*/ + ehci_writel(ehci, tmp, &ehci->regs->txfill_tuning); + + tmp = ehci_readl(ehci, &ehci->regs->txttfill_tuning); + tmp |= 0x2; /* set sheduler overhead to 2 * 6.333us */ + ehci_writel(ehci, tmp, &ehci->regs->txttfill_tuning); + + return retval; +} + +static int ehci_oxnas_drv_probe(struct platform_device *ofdev) +{ + struct device_node *np = ofdev->dev.of_node; + struct usb_hcd *hcd; + struct ehci_hcd *ehci; + struct resource res; + struct oxnas_hcd *oxnas; + int irq, err; + struct reset_control *rstc; + + if (usb_disabled()) + return -ENODEV; + + if (!ofdev->dev.dma_mask) + ofdev->dev.dma_mask = &ofdev->dev.coherent_dma_mask; + if (!ofdev->dev.coherent_dma_mask) + ofdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + + hcd = usb_create_hcd(&oxnas_hc_driver, &ofdev->dev, + dev_name(&ofdev->dev)); + if (!hcd) + return -ENOMEM; + + err = of_address_to_resource(np, 0, &res); + if (err) + goto err_res; + + hcd->rsrc_start = res.start; + hcd->rsrc_len = resource_size(&res); + + hcd->regs = devm_ioremap_resource(&ofdev->dev, &res); + if (IS_ERR(hcd->regs)) { + dev_err(&ofdev->dev, "devm_ioremap_resource failed\n"); + err = PTR_ERR(hcd->regs); + goto err_ioremap; + } + + oxnas = (struct oxnas_hcd *)hcd_to_ehci(hcd)->priv; + + oxnas->use_pllb = of_property_read_bool(np, "plxtch,ehci_use_pllb"); + oxnas->use_phya = of_property_read_bool(np, "plxtch,ehci_use_phya"); + + oxnas->clk = of_clk_get_by_name(np, "usb"); + if (IS_ERR(oxnas->clk)) { + err = PTR_ERR(oxnas->clk); + goto err_clk; + } + + if (oxnas->use_pllb) { + oxnas->refsrc = of_clk_get_by_name(np, "refsrc"); + if (IS_ERR(oxnas->refsrc)) { + err = PTR_ERR(oxnas->refsrc); + goto err_refsrc; + } + oxnas->phyref = of_clk_get_by_name(np, "phyref"); + if (IS_ERR(oxnas->refsrc)) { + err = PTR_ERR(oxnas->refsrc); + goto err_phyref; + } + + } else { + oxnas->refsrc = NULL; + oxnas->phyref = NULL; + } + + rstc = devm_reset_control_get(&ofdev->dev, "host"); + if (IS_ERR(rstc)) { + err = PTR_ERR(rstc); + goto err_rst; + } + oxnas->rst_host = rstc; + + rstc = devm_reset_control_get(&ofdev->dev, "phya"); + if (IS_ERR(rstc)) { + err = PTR_ERR(rstc); + goto err_rst; + } + oxnas->rst_phya = rstc; + + rstc = devm_reset_control_get(&ofdev->dev, "phyb"); + if (IS_ERR(rstc)) { + err = PTR_ERR(rstc); + goto err_rst; + } + oxnas->rst_phyb = rstc; + + irq = irq_of_parse_and_map(np, 0); + if (!irq) { + dev_err(&ofdev->dev, "irq_of_parse_and_map failed\n"); + err = -EBUSY; + goto err_irq; + } + + hcd->has_tt = 1; + ehci = hcd_to_ehci(hcd); + ehci->caps = hcd->regs; + + start_oxnas_usb_ehci(oxnas); + + err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED); + if (err) + goto err_hcd; + + return 0; + +err_hcd: + stop_oxnas_usb_ehci(oxnas); +err_irq: +err_rst: + if (oxnas->phyref) + clk_put(oxnas->phyref); +err_phyref: + if (oxnas->refsrc) + clk_put(oxnas->refsrc); +err_refsrc: + clk_put(oxnas->clk); +err_clk: +err_ioremap: +err_res: + usb_put_hcd(hcd); + + return err; +} + +static int ehci_oxnas_drv_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct oxnas_hcd *oxnas = (struct oxnas_hcd *)hcd_to_ehci(hcd)->priv; + + usb_remove_hcd(hcd); + if (oxnas->use_pllb) { + clk_disable_unprepare(oxnas->phyref); + clk_put(oxnas->phyref); + clk_disable_unprepare(oxnas->refsrc); + clk_put(oxnas->refsrc); + } + clk_disable_unprepare(oxnas->clk); + usb_put_hcd(hcd); + + return 0; +} + +static const struct of_device_id oxnas_ehci_dt_ids[] = { + { .compatible = "plxtch,nas782x-ehci" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, oxnas_ehci_dt_ids); + +static struct platform_driver ehci_oxnas_driver = { + .probe = ehci_oxnas_drv_probe, + .remove = ehci_oxnas_drv_remove, + .shutdown = usb_hcd_platform_shutdown, + .driver.name = "oxnas-ehci", + .driver.of_match_table = oxnas_ehci_dt_ids, +}; + +static const struct ehci_driver_overrides oxnas_overrides __initconst = { + .reset = ehci_oxnas_reset, + .extra_priv_size = sizeof(struct oxnas_hcd), +}; + +static int __init ehci_oxnas_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + ehci_init_driver(&oxnas_hc_driver, &oxnas_overrides); + return platform_driver_register(&ehci_oxnas_driver); +} +module_init(ehci_oxnas_init); + +static void __exit ehci_oxnas_cleanup(void) +{ + platform_driver_unregister(&ehci_oxnas_driver); +} +module_exit(ehci_oxnas_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_ALIAS("platform:oxnas-ehci"); +MODULE_LICENSE("GPL"); diff --git a/target/linux/oxnas/image/Makefile b/target/linux/oxnas/image/Makefile new file mode 100644 index 0000000..3a2a58d --- /dev/null +++ b/target/linux/oxnas/image/Makefile @@ -0,0 +1,135 @@ +# +# Copyright (C) 2013 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/image.mk + +STG212_UBI_OPTS = -m 2048 -p 128KiB -s 512 +STG212_UBIFS_OPTS = -m 2048 -e 126KiB -c 4096 + +KD20_UBI_OPTS = -m 2048 -p 128KiB -s 512 +KD20_UBIFS_OPTS = -m 2048 -e 126KiB -c 4096 + +POGOPLUG_PRO_UBI_OPTS = -m 2048 -p 128KiB -s 512 +POGOPLUG_PRO_UBIFS_OPTS = -m 2048 -e 126KiB -c 4096 + +POGOPLUG_V3_UBI_OPTS = -m 2048 -p 128KiB -s 512 +POGOPLUG_V3_UBIFS_OPTS = -m 2048 -e 126KiB -c 4096 + +KDIR_TMP:=$(KDIR)/tmp +VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux +UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage + +define sanitize_profile_name +$(shell echo $(PROFILE) | tr '[:upper:]' '[:lower:]' | sed 's/_/-/g') +endef + +define Image/BuildKernel/Template + $(CP) $(LINUX_DIR)/arch/arm/boot/dts/ox820-$(1).dtb $(BIN_DIR)/$(IMG_PREFIX)-$(1).dtb + + $(call Image/BuildKernel/MkFIT,$(1),$(KDIR)/zImage,$(BIN_DIR)/$(IMG_PREFIX)-$(1).dtb,none,0x60008000,0x60008000) + $(CP) $(KDIR)/fit-$(1).itb $(BIN_DIR)/$(IMG_PREFIX)-$(1)-fit-uImage.bin + + ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),) + $(call Image/BuildKernel/MkFIT,$(1),$(KDIR)/zImage-initramfs,$(BIN_DIR)/$(IMG_PREFIX)-$(1).dtb,none,0x60008000,0x60008000,-initramfs) + $(CP) $(KDIR)/fit-$(1)-initramfs.itb $(BIN_DIR)/$(IMG_PREFIX)-$(1)-fit-uImage-initramfs.itb + if [ -e "$(BIN_DIR)/$(IMG_PREFIX)-ox820-u-boot.bin" ]; then \ + ( dd if=$(BIN_DIR)/$(IMG_PREFIX)-ox820-u-boot.bin bs=128k conv=sync ; dd if=$(KDIR)/fit-$(1)-initramfs.itb bs=128k conv=sync ) \ + > $(BIN_DIR)/$(IMG_PREFIX)-$(1)-u-boot-initramfs.itb; \ + fi + endif + + $(CP) $(KDIR)/zImage $(BIN_DIR)/$(IMG_PREFIX)-zImage + $(call Image/BuildKernel/MkuImage, \ + none, 0x60008000, 0x60008000, \ + $(BIN_DIR)/$(IMG_PREFIX)-zImage, \ + $(BIN_DIR)/$(IMG_PREFIX)-uImage \ + ) + + ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),) + $(CP) $(KDIR)/zImage-initramfs $(BIN_DIR)/$(IMG_PREFIX)-zImage-initramfs + $(call Image/BuildKernel/MkuImage, \ + none, 0x60008000, 0x60008000, \ + $(BIN_DIR)/$(IMG_PREFIX)-zImage-initramfs, \ + $(BIN_DIR)/$(IMG_PREFIX)-uImage-initramfs \ + ) + endif +endef + +define Image/InstallKernel/Template + + ifneq ($(CONFIG_TARGET_ROOTFS_INCLUDE_KERNEL),) + $(INSTALL_DIR) $(TARGET_DIR)/boot + ifneq ($(CONFIG_TARGET_ROOTFS_INCLUDE_UIMAGE),) + $(CP) $(BIN_DIR)/$(IMG_PREFIX)-uImage $(TARGET_DIR)/boot/ + ln -sf $(IMG_PREFIX)-uImage $(TARGET_DIR)/boot/uImage + endif + ifneq ($(CONFIG_TARGET_ROOTFS_INCLUDE_ZIMAGE),) + $(CP) $(BIN_DIR)/$(IMG_PREFIX)-zImage $(TARGET_DIR)/boot/ + ln -sf $(IMG_PREFIX)-zImage $(TARGET_DIR)/boot/zImage + endif + ifneq ($(CONFIG_TARGET_ROOTFS_INCLUDE_FIT),) + $(CP) $(BIN_DIR)/$(IMG_PREFIX)-$(1)-fit-uImage.itb $(TARGET_DIR)/boot/ + ln -sf $(IMG_PREFIX)-$(1)-fit-uImage.itb $(TARGET_DIR)/boot/uImage.itb + endif + endif + + ifneq ($(CONFIG_TARGET_ROOTFS_INCLUDE_DTB),) + $(INSTALL_DIR) $(TARGET_DIR)/boot + ifneq ($(1),) + $(CP) $(BIN_DIR)/$(IMG_PREFIX)-$(1).dtb $(TARGET_DIR)/boot/ + ln -sf $(IMG_PREFIX)-$(1).dtb $(TARGET_DIR)/boot/$(1).dtb + endif + endif +endef + +define Image/Build/squashfs + $(call Image/Build/SysupgradeNAND,$(call sanitize_profile_name),$(1),$(KDIR)/fit-$(call sanitize_profile_name).itb) + $(call Image/Build/UbinizeImage,$(call sanitize_profile_name),--uboot-env --kernel $(KDIR)/fit-$(call sanitize_profile_name).itb,$(1),$($(PROFILE)_UBI_OPTS)) +endef + +define Image/mkfs/targz + + $(TAR) -czpf $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-rootfs.tar.gz --numeric-owner --owner=0 --group=0 -C $(TARGET_DIR)/ . +endef + +define Image/Build/ubifs + + ifneq ($($(PROFILE)_UBIFS_OPTS),) + $(call Image/Build/SysupgradeNAND,$(call sanitize_profile_name),ubifs,$(KDIR)/fit-$(call sanitize_profile_name).itb) + $(call Image/Build/UbinizeImage,$(call sanitize_profile_name),--uboot-env --kernel $(KDIR)/fit-$(call sanitize_profile_name).itb,ubifs,$($(PROFILE)_UBI_OPTS)) + endif + +endef + +Image/BuildKernel/Template/POGOPLUG_PRO=$(call Image/BuildKernel/Template,pogoplug-pro) +Image/InstallKernel/Template/POGOPLUG_PRO=$(call Image/InstallKernel/Template,pogoplug-pro) + +Image/BuildKernel/Template/POGOPLUG_V3=$(call Image/BuildKernel/Template,pogoplug-v3) +Image/InstallKernel/Template/POGOPLUG_V3=$(call Image/InstallKernel/Template,pogoplug-v3) + +Image/BuildKernel/Template/STG212=$(call Image/BuildKernel/Template,stg212) +Image/InstallKernel/Template/STG212=$(call Image/InstallKernel/Template,stg212) + +Image/BuildKernel/Template/KD20=$(call Image/BuildKernel/Template,kd20) +Image/InstallKernel/Template/KD20=$(call Image/InstallKernel/Template,kd20) + +define Image/BuildKernel + $(call Image/BuildKernel/Template/$(PROFILE)) +endef + +define Image/InstallKernel + $(call Image/InstallKernel/Template/$(PROFILE)) +endef + +define Image/Build + $(if $(Image/Build/$(1)), \ + $(call Image/Build/$(1),$(1)), \ + $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-$(1).img \ + ) +endef + +$(eval $(call BuildImage)) diff --git a/target/linux/oxnas/patches-3.18/010-arm_introduce-dma-fiq-irq-broadcast.patch b/target/linux/oxnas/patches-3.18/010-arm_introduce-dma-fiq-irq-broadcast.patch new file mode 100644 index 0000000..fb7547f --- /dev/null +++ b/target/linux/oxnas/patches-3.18/010-arm_introduce-dma-fiq-irq-broadcast.patch @@ -0,0 +1,62 @@ +Index: linux-3.18-rc4/arch/arm/include/asm/glue-cache.h +=================================================================== +--- linux-3.18-rc4.orig/arch/arm/include/asm/glue-cache.h ++++ linux-3.18-rc4/arch/arm/include/asm/glue-cache.h +@@ -156,11 +156,19 @@ static inline void nop_dma_unmap_area(co + #define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range) + #define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range) + #define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range) ++#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST + #define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area) + + #define dmac_map_area __glue(_CACHE,_dma_map_area) + #define dmac_unmap_area __glue(_CACHE,_dma_unmap_area) + #define dmac_flush_range __glue(_CACHE,_dma_flush_range) ++#else ++#define __cpuc_flush_dcache_area __glue(fiq,_flush_kern_dcache_area) ++ ++#define dmac_map_area __glue(fiq,_dma_map_area) ++#define dmac_unmap_area __glue(fiq,_dma_unmap_area) ++#define dmac_flush_range __glue(fiq,_dma_flush_range) ++#endif /* CONFIG_DMA_CACHE_FIQ_BROADCAST */ + #endif + + #endif +Index: linux-3.18-rc4/arch/arm/mm/Kconfig +=================================================================== +--- linux-3.18-rc4.orig/arch/arm/mm/Kconfig ++++ linux-3.18-rc4/arch/arm/mm/Kconfig +@@ -843,6 +843,17 @@ config DMA_CACHE_RWFO + in hardware, other workarounds are needed (e.g. cache + maintenance broadcasting in software via FIQ). + ++config DMA_CACHE_FIQ_BROADCAST ++ bool "Enable fiq broadcast DMA cache maintenance" ++ depends on CPU_V6K && SMP ++ select FIQ ++ help ++ The Snoop Control Unit on ARM11MPCore does not detect the ++ cache maintenance operations and the dma_{map,unmap}_area() ++ functions may leave stale cache entries on other CPUs. By ++ enabling this option, fiq broadcast in the ARMv6 ++ DMA cache maintenance functions is performed. ++ + config OUTER_CACHE + bool + +Index: linux-3.18-rc4/arch/arm/mm/flush.c +=================================================================== +--- linux-3.18-rc4.orig/arch/arm/mm/flush.c ++++ linux-3.18-rc4/arch/arm/mm/flush.c +@@ -314,7 +314,11 @@ void flush_dcache_page(struct page *page + + mapping = page_mapping(page); + ++#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST + if (!cache_ops_need_broadcast() && ++#else ++ if ( ++#endif + mapping && !page_mapped(page)) + clear_bit(PG_dcache_clean, &page->flags); + else { diff --git a/target/linux/oxnas/patches-3.18/250-add-plxtech-vendor-prefix.patch b/target/linux/oxnas/patches-3.18/250-add-plxtech-vendor-prefix.patch new file mode 100644 index 0000000..c495258 --- /dev/null +++ b/target/linux/oxnas/patches-3.18/250-add-plxtech-vendor-prefix.patch @@ -0,0 +1,12 @@ +Index: linux-3.18-rc4/Documentation/devicetree/bindings/vendor-prefixes.txt +=================================================================== +--- linux-3.18-rc4.orig/Documentation/devicetree/bindings/vendor-prefixes.txt ++++ linux-3.18-rc4/Documentation/devicetree/bindings/vendor-prefixes.txt +@@ -113,6 +113,7 @@ panasonic Panasonic Corporation + phytec PHYTEC Messtechnik GmbH + picochip Picochip Ltd + plathome Plat'Home Co., Ltd. ++plxtech PLX Technology, Inc. + pixcir PIXCIR MICROELECTRONICS Co., Ltd + powervr PowerVR (deprecated, use img) + qca Qualcomm Atheros, Inc. diff --git a/target/linux/oxnas/patches-3.18/300-introduce-oxnas-platform.patch b/target/linux/oxnas/patches-3.18/300-introduce-oxnas-platform.patch new file mode 100644 index 0000000..17ec83b --- /dev/null +++ b/target/linux/oxnas/patches-3.18/300-introduce-oxnas-platform.patch @@ -0,0 +1,79 @@ +Index: linux-3.18-rc4/arch/arm/Kconfig +=================================================================== +--- linux-3.18-rc4.orig/arch/arm/Kconfig ++++ linux-3.18-rc4/arch/arm/Kconfig +@@ -369,6 +369,17 @@ config ARCH_VERSATILE + help + This enables support for ARM Ltd Versatile board. + ++config ARCH_OXNAS ++ bool "Oxford Semiconductor 815/820/825 NAS SoC" ++ select ARCH_REQUIRE_GPIOLIB ++ select CLKDEV_LOOKUP ++ select GENERIC_CLOCKEVENTS ++ select COMMON_CLK ++ select MIGHT_HAVE_PCI ++ select ARCH_HAS_RESET_CONTROLLER ++ help ++ This enables support for Oxsemi 815/820/825 NAS SoC ++ + config ARCH_AT91 + bool "Atmel AT91" + select ARCH_REQUIRE_GPIOLIB +@@ -922,6 +933,8 @@ source "arch/arm/mach-omap2/Kconfig" + + source "arch/arm/mach-orion5x/Kconfig" + ++source "arch/arm/mach-oxnas/Kconfig" ++ + source "arch/arm/mach-picoxcell/Kconfig" + + source "arch/arm/mach-pxa/Kconfig" +Index: linux-3.18-rc4/arch/arm/Makefile +=================================================================== +--- linux-3.18-rc4.orig/arch/arm/Makefile ++++ linux-3.18-rc4/arch/arm/Makefile +@@ -187,6 +187,7 @@ machine-$(CONFIG_ARCH_NSPIRE) += nspire + machine-$(CONFIG_ARCH_OMAP1) += omap1 + machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2 + machine-$(CONFIG_ARCH_ORION5X) += orion5x ++machine-$(CONFIG_ARCH_OXNAS) += oxnas + machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell + machine-$(CONFIG_ARCH_PXA) += pxa + machine-$(CONFIG_ARCH_QCOM) += qcom +Index: linux-3.18-rc4/arch/arm/boot/dts/Makefile +=================================================================== +--- linux-3.18-rc4.orig/arch/arm/boot/dts/Makefile ++++ linux-3.18-rc4/arch/arm/boot/dts/Makefile +@@ -352,6 +352,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += orion5x-la + orion5x-lacie-ethernet-disk-mini-v2.dtb \ + orion5x-maxtor-shared-storage-2.dtb \ + orion5x-rd88f5182-nas.dtb ++dtb-$(CONFIG_ARCH_OXNAS) += ox820-pogoplug-pro.dtb + dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb + dtb-$(CONFIG_ARCH_QCOM) += \ + qcom-apq8064-cm-qs600.dtb \ +Index: linux-3.18-rc4/arch/arm/tools/mach-types +=================================================================== +--- linux-3.18-rc4.orig/arch/arm/tools/mach-types ++++ linux-3.18-rc4/arch/arm/tools/mach-types +@@ -228,6 +228,7 @@ edb9302a MACH_EDB9302A EDB9302A 1127 + edb9307a MACH_EDB9307A EDB9307A 1128 + omap_3430sdp MACH_OMAP_3430SDP OMAP_3430SDP 1138 + vstms MACH_VSTMS VSTMS 1140 ++ox820 MACH_OX820 OX820 1152 + micro9m MACH_MICRO9M MICRO9M 1169 + bug MACH_BUG BUG 1179 + at91sam9263ek MACH_AT91SAM9263EK AT91SAM9263EK 1202 +Index: linux-3.18-rc4/drivers/clk/Makefile +=================================================================== +--- linux-3.18-rc4.orig/drivers/clk/Makefile ++++ linux-3.18-rc4/drivers/clk/Makefile +@@ -29,6 +29,7 @@ obj-$(CONFIG_COMMON_CLK_MAX77802) += clk + obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o + obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o + obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o ++obj-$(CONFIG_ARCH_OXNAS) += clk-oxnas.o + obj-$(CONFIG_COMMON_CLK_PALMAS) += clk-palmas.o + obj-$(CONFIG_CLK_PPC_CORENET) += clk-ppc-corenet.o + obj-$(CONFIG_COMMON_CLK_RK808) += clk-rk808.o diff --git a/target/linux/oxnas/patches-3.18/310-oxnas-clocksource.patch b/target/linux/oxnas/patches-3.18/310-oxnas-clocksource.patch new file mode 100644 index 0000000..0959e53 --- /dev/null +++ b/target/linux/oxnas/patches-3.18/310-oxnas-clocksource.patch @@ -0,0 +1,29 @@ +Index: linux-3.18-rc4/drivers/clocksource/Kconfig +=================================================================== +--- linux-3.18-rc4.orig/drivers/clocksource/Kconfig ++++ linux-3.18-rc4/drivers/clocksource/Kconfig +@@ -156,6 +156,12 @@ config VF_PIT_TIMER + help + Support for Period Interrupt Timer on Freescale Vybrid Family SoCs. + ++config CLKSRC_RPS_TIMER ++ def_bool y if ARCH_OXNAS ++ select CLKSRC_MMIO ++ help ++ This option enables support for the oxnas rps timers. ++ + config SYS_SUPPORTS_SH_CMT + bool + +Index: linux-3.18-rc4/drivers/clocksource/Makefile +=================================================================== +--- linux-3.18-rc4.orig/drivers/clocksource/Makefile ++++ linux-3.18-rc4/drivers/clocksource/Makefile +@@ -36,6 +36,7 @@ obj-$(CONFIG_CLKSRC_EFM32) += time-efm32 + obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o + obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o + obj-$(CONFIG_FSL_FTM_TIMER) += fsl_ftm_timer.o ++obj-$(CONFIG_CLKSRC_RPS_TIMER) += oxnas_rps_timer.o + obj-$(CONFIG_VF_PIT_TIMER) += vf_pit_timer.o + obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o + obj-$(CONFIG_MTK_TIMER) += mtk_timer.o diff --git a/target/linux/oxnas/patches-3.18/320-oxnas-irqchip.patch b/target/linux/oxnas/patches-3.18/320-oxnas-irqchip.patch new file mode 100644 index 0000000..e6262da --- /dev/null +++ b/target/linux/oxnas/patches-3.18/320-oxnas-irqchip.patch @@ -0,0 +1,40 @@ +Index: linux-3.18-rc4/drivers/irqchip/Kconfig +=================================================================== +--- linux-3.18-rc4.orig/drivers/irqchip/Kconfig ++++ linux-3.18-rc4/drivers/irqchip/Kconfig +@@ -15,6 +15,11 @@ config ARM_GIC_V3 + select IRQ_DOMAIN + select MULTI_IRQ_HANDLER + ++config PLXTECH_RPS ++ def_bool y if ARHC_OXNAS ++ depends on ARCH_OXNAS ++ select IRQ_DOMAIN ++ + config ARM_NVIC + bool + select IRQ_DOMAIN +Index: linux-3.18-rc4/drivers/irqchip/Makefile +=================================================================== +--- linux-3.18-rc4.orig/drivers/irqchip/Makefile ++++ linux-3.18-rc4/drivers/irqchip/Makefile +@@ -28,6 +28,7 @@ obj-$(CONFIG_IMGPDC_IRQ) += irq-imgpdc. + obj-$(CONFIG_SIRF_IRQ) += irq-sirfsoc.o + obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o + obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o ++obj-$(CONFIG_PLXTECH_RPS) += irq-rps.o + obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o + obj-$(CONFIG_ARCH_NSPIRE) += irq-zevio.o + obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o +Index: linux-3.18-rc4/drivers/irqchip/irq-gic.c +=================================================================== +--- linux-3.18-rc4.orig/drivers/irqchip/irq-gic.c ++++ linux-3.18-rc4/drivers/irqchip/irq-gic.c +@@ -1044,6 +1044,7 @@ IRQCHIP_DECLARE(gic_400, "arm,gic-400", + IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init); + IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init); + IRQCHIP_DECLARE(cortex_a7_gic, "arm,cortex-a7-gic", gic_of_init); ++IRQCHIP_DECLARE(arm11_mpcore_gic, "arm,arm11mp-gic", gic_of_init); + IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init); + IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init); + diff --git a/target/linux/oxnas/patches-3.18/330-oxnas-pinctrl.patch b/target/linux/oxnas/patches-3.18/330-oxnas-pinctrl.patch new file mode 100644 index 0000000..3ecc6eb --- /dev/null +++ b/target/linux/oxnas/patches-3.18/330-oxnas-pinctrl.patch @@ -0,0 +1,32 @@ +Index: linux-3.18-rc4/drivers/pinctrl/Kconfig +=================================================================== +--- linux-3.18-rc4.orig/drivers/pinctrl/Kconfig ++++ linux-3.18-rc4/drivers/pinctrl/Kconfig +@@ -67,6 +67,15 @@ config PINCTRL_AT91 + help + Say Y here to enable the at91 pinctrl driver + ++config PINCTRL_OXNAS ++ bool "OXNAS pinctrl driver" ++ depends on OF ++ depends on ARCH_OXNAS ++ select PINMUX ++ select PINCONF ++ help ++ Say Y here to enable the oxnas pinctrl driver ++ + config PINCTRL_BAYTRAIL + bool "Intel Baytrail GPIO pin control" + depends on GPIOLIB && ACPI && X86 +Index: linux-3.18-rc4/drivers/pinctrl/Makefile +=================================================================== +--- linux-3.18-rc4.orig/drivers/pinctrl/Makefile ++++ linux-3.18-rc4/drivers/pinctrl/Makefile +@@ -18,6 +18,7 @@ obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl + obj-$(CONFIG_PINCTRL_BAYTRAIL) += pinctrl-baytrail.o + obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o + obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o ++obj-$(CONFIG_PINCTRL_OXNAS) += pinctrl-oxnas.o + obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o + obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o + obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o diff --git a/target/linux/oxnas/patches-3.18/340-oxnas-pcie.patch b/target/linux/oxnas/patches-3.18/340-oxnas-pcie.patch new file mode 100644 index 0000000..6549db0 --- /dev/null +++ b/target/linux/oxnas/patches-3.18/340-oxnas-pcie.patch @@ -0,0 +1,26 @@ +Index: linux-3.18-rc4/drivers/pci/host/Kconfig +=================================================================== +--- linux-3.18-rc4.orig/drivers/pci/host/Kconfig ++++ linux-3.18-rc4/drivers/pci/host/Kconfig +@@ -91,4 +91,9 @@ config PCI_XGENE + There are 5 internal PCIe ports available. Each port is GEN3 capable + and have varied lanes from x1 to x8. + ++config PCI_OXNAS ++ bool "PLX Oxnas PCIe controller" ++ depends on ARCH_OXNAS ++ select PCIEPORTBUS ++ + endmenu +Index: linux-3.18-rc4/drivers/pci/host/Makefile +=================================================================== +--- linux-3.18-rc4.orig/drivers/pci/host/Makefile ++++ linux-3.18-rc4/drivers/pci/host/Makefile +@@ -3,6 +3,7 @@ obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o + obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o + obj-$(CONFIG_PCI_IMX6) += pci-imx6.o + obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o ++obj-$(CONFIG_PCI_OXNAS) += pcie-oxnas.o + obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o + obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o + obj-$(CONFIG_PCI_RCAR_GEN2_PCIE) += pcie-rcar.o diff --git a/target/linux/oxnas/patches-3.18/350-oxnas-reset.patch b/target/linux/oxnas/patches-3.18/350-oxnas-reset.patch new file mode 100644 index 0000000..5540920 --- /dev/null +++ b/target/linux/oxnas/patches-3.18/350-oxnas-reset.patch @@ -0,0 +1,24 @@ +Index: linux-3.18-rc4/drivers/reset/Kconfig +=================================================================== +--- linux-3.18-rc4.orig/drivers/reset/Kconfig ++++ linux-3.18-rc4/drivers/reset/Kconfig +@@ -12,4 +12,9 @@ menuconfig RESET_CONTROLLER + + If unsure, say no. + ++config RESET_CONTROLLER_OXNAS ++ bool ++ select RESET_CONTROLLER ++ + source "drivers/reset/sti/Kconfig" ++ +Index: linux-3.18-rc4/drivers/reset/Makefile +=================================================================== +--- linux-3.18-rc4.orig/drivers/reset/Makefile ++++ linux-3.18-rc4/drivers/reset/Makefile +@@ -1,4 +1,5 @@ + obj-$(CONFIG_RESET_CONTROLLER) += core.o ++obj-$(CONFIG_RESET_CONTROLLER_OXNAS) += reset-ox820.o + obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o + obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o + obj-$(CONFIG_ARCH_STI) += sti/ diff --git a/target/linux/oxnas/patches-3.18/400-oxnas-nand.patch b/target/linux/oxnas/patches-3.18/400-oxnas-nand.patch new file mode 100644 index 0000000..90827e5 --- /dev/null +++ b/target/linux/oxnas/patches-3.18/400-oxnas-nand.patch @@ -0,0 +1,28 @@ +Index: linux-3.18-rc4/drivers/mtd/nand/Kconfig +=================================================================== +--- linux-3.18-rc4.orig/drivers/mtd/nand/Kconfig ++++ linux-3.18-rc4/drivers/mtd/nand/Kconfig +@@ -516,4 +516,12 @@ config MTD_NAND_XWAY + Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached + to the External Bus Unit (EBU). + ++config MTD_NAND_OXNAS ++ tristate "Support for NAND on Plxtech NAS782X SoC" ++ depends on ARCH_OXNAS ++ select MTD_NAND_PLATFORM ++ help ++ Enables support for NAND Flash chips on Plxtech NAS782X SoCs. NAND is attached ++ to the STATIC Unit. ++ + endif # MTD_NAND +Index: linux-3.18-rc4/drivers/mtd/nand/Makefile +=================================================================== +--- linux-3.18-rc4.orig/drivers/mtd/nand/Makefile ++++ linux-3.18-rc4/drivers/mtd/nand/Makefile +@@ -50,5 +50,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740 + obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/ + obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o + obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/ ++obj-$(CONFIG_MTD_NAND_OXNAS) += oxnas_nand.o + + nand-objs := nand_base.o nand_bbt.o nand_timings.o diff --git a/target/linux/oxnas/patches-3.18/500-oxnas-sata.patch b/target/linux/oxnas/patches-3.18/500-oxnas-sata.patch new file mode 100644 index 0000000..94b792b --- /dev/null +++ b/target/linux/oxnas/patches-3.18/500-oxnas-sata.patch @@ -0,0 +1,30 @@ +Index: linux-3.18-rc4/drivers/ata/Kconfig +=================================================================== +--- linux-3.18-rc4.orig/drivers/ata/Kconfig ++++ linux-3.18-rc4/drivers/ata/Kconfig +@@ -385,6 +385,13 @@ config SATA_VITESSE + + If unsure, say N. + ++config SATA_OXNAS ++ tristate "PLXTECH NAS782X SATA support" ++ help ++ This option enables support for Nas782x Serial ATA controller. ++ ++ If unsure, say N. ++ + comment "PATA SFF controllers with BMDMA" + + config PATA_ALI +Index: linux-3.18-rc4/drivers/ata/Makefile +=================================================================== +--- linux-3.18-rc4.orig/drivers/ata/Makefile ++++ linux-3.18-rc4/drivers/ata/Makefile +@@ -37,6 +37,7 @@ obj-$(CONFIG_SATA_SVW) += sata_svw.o + obj-$(CONFIG_SATA_ULI) += sata_uli.o + obj-$(CONFIG_SATA_VIA) += sata_via.o + obj-$(CONFIG_SATA_VITESSE) += sata_vsc.o ++obj-$(CONFIG_SATA_OXNAS) += sata_oxnas.o + + # SFF PATA w/ BMDMA + obj-$(CONFIG_PATA_ALI) += pata_ali.o diff --git a/target/linux/oxnas/patches-3.18/800-oxnas-ehci.patch b/target/linux/oxnas/patches-3.18/800-oxnas-ehci.patch new file mode 100644 index 0000000..f2221dd --- /dev/null +++ b/target/linux/oxnas/patches-3.18/800-oxnas-ehci.patch @@ -0,0 +1,30 @@ +Index: linux-3.18-rc4/drivers/usb/host/Kconfig +=================================================================== +--- linux-3.18-rc4.orig/drivers/usb/host/Kconfig ++++ linux-3.18-rc4/drivers/usb/host/Kconfig +@@ -302,6 +302,13 @@ config USB_OCTEON_EHCI + USB 2.0 device support. All CN6XXX based chips with USB are + supported. + ++config USB_EHCI_OXNAS ++ tristate "OXNAS EHCI Module" ++ depends on USB_EHCI_HCD && ARCH_OXNAS ++ select USB_EHCI_ROOT_HUB_TT ++ ---help--- ++ Enable support for the OX820 SOC's on-chip EHCI controller. ++ + endif # USB_EHCI_HCD + + config USB_OXU210HP_HCD +Index: linux-3.18-rc4/drivers/usb/host/Makefile +=================================================================== +--- linux-3.18-rc4.orig/drivers/usb/host/Makefile ++++ linux-3.18-rc4/drivers/usb/host/Makefile +@@ -44,6 +44,7 @@ obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci- + obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o + obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o + obj-$(CONFIG_USB_W90X900_EHCI) += ehci-w90x900.o ++obj-$(CONFIG_USB_EHCI_OXNAS) += ehci-oxnas.o + + obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o + obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o diff --git a/target/linux/oxnas/patches-3.18/900-more-boards.patch b/target/linux/oxnas/patches-3.18/900-more-boards.patch new file mode 100644 index 0000000..b31967a --- /dev/null +++ b/target/linux/oxnas/patches-3.18/900-more-boards.patch @@ -0,0 +1,16 @@ +Index: linux-3.18-rc4/arch/arm/boot/dts/Makefile +=================================================================== +--- linux-3.18-rc4.orig/arch/arm/boot/dts/Makefile ++++ linux-3.18-rc4/arch/arm/boot/dts/Makefile +@@ -352,7 +352,10 @@ dtb-$(CONFIG_ARCH_ORION5X) += orion5x-la + orion5x-lacie-ethernet-disk-mini-v2.dtb \ + orion5x-maxtor-shared-storage-2.dtb \ + orion5x-rd88f5182-nas.dtb +-dtb-$(CONFIG_ARCH_OXNAS) += ox820-pogoplug-pro.dtb ++dtb-$(CONFIG_ARCH_OXNAS) += ox820-pogoplug-pro.dtb \ ++ ox820-pogoplug-v3.dtb \ ++ ox820-stg212.dtb \ ++ ox820-kd20.dtb + dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb + dtb-$(CONFIG_ARCH_QCOM) += \ + qcom-apq8064-cm-qs600.dtb \ diff --git a/target/linux/oxnas/profiles/100-Generic.mk b/target/linux/oxnas/profiles/100-Generic.mk new file mode 100644 index 0000000..734b123 --- /dev/null +++ b/target/linux/oxnas/profiles/100-Generic.mk @@ -0,0 +1,53 @@ +# +# Copyright (C) 2014 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/POGOPLUG_PRO + NAME:=PogoPlug Pro + PACKAGES:= \ + uboot-envtools kmod-usb2-oxnas +endef + +define Profile/POGOPLUG_PRO/Description + Profile with built-in ox820 PogoPlug Pro device-tree + (board with miniPCIe slot) +endef + +define Profile/POGOPLUG_V3 + NAME:=PogoPlug V3 + PACKAGES:= \ + uboot-envtools kmod-usb2-oxnas +endef + +define Profile/POGOPLUG_V3/Description + Profile with built-in ox820 PogoPlug V3 device-tree + (board without miniPCIe slot) +endef + +define Profile/STG212 + NAME:=MitraStar STG-212 + PACKAGES:= \ + uboot-envtools kmod-usb2-oxnas +endef + +define Profile/STG212/Description + Profile with built-in ox820 STG-212 device-tree +endef + +define Profile/KD20 + NAME:=Shuttle KD20 + PACKAGES:= \ + uboot-envtools kmod-usb2-oxnas kmod-usb3 kmod-rtc-pcf8563 +endef + +define Profile/KD20/Description + Profile with built-in ox820 KD20 device-tree +endef + +$(eval $(call Profile,POGOPLUG_PRO)) +$(eval $(call Profile,POGOPLUG_V3)) +$(eval $(call Profile,STG212)) +$(eval $(call Profile,KD20)) |