diff options
Diffstat (limited to 'target/linux')
-rw-r--r-- | target/linux/ar71xx/patches-3.6/609-MIPS-ath79-ap136-fixes.patch | 82 |
1 files changed, 40 insertions, 42 deletions
diff --git a/target/linux/ar71xx/patches-3.6/609-MIPS-ath79-ap136-fixes.patch b/target/linux/ar71xx/patches-3.6/609-MIPS-ath79-ap136-fixes.patch index 58cd680..9b887cb 100644 --- a/target/linux/ar71xx/patches-3.6/609-MIPS-ath79-ap136-fixes.patch +++ b/target/linux/ar71xx/patches-3.6/609-MIPS-ath79-ap136-fixes.patch @@ -56,40 +56,16 @@ static struct gpio_led ap136_leds_gpio[] __initdata = { { -@@ -98,63 +104,106 @@ static struct gpio_keys_button ap136_gpi +@@ -98,63 +104,103 @@ static struct gpio_keys_button ap136_gpi }, }; -static struct ath79_spi_controller_data ap136_spi0_data = { - .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, - .cs_line = 0, -+static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg = { -+ .mode = AR8327_PAD_MAC_RGMII, -+ .txclk_delay_en = true, -+ .rxclk_delay_en = true, -+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, -+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, - }; - --static struct spi_board_info ap136_spi_info[] = { -- { -- .bus_num = 0, -- .chip_select = 0, -- .max_speed_hz = 25000000, -- .modalias = "mx25l6405d", -- .controller_data = &ap136_spi0_data, -- } -+static struct ar8327_pad_cfg ap136_ar8327_pad6_cfg = { -+ .mode = AR8327_PAD_MAC_SGMII, -+ .txclk_delay_en = false, -+ .rxclk_delay_en = true, -+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL0, -+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0, - }; - --static struct ath79_spi_platform_data ap136_spi_data = { -- .bus_num = 0, -- .num_chipselect = 1, ++static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg; ++static struct ar8327_pad_cfg ap136_ar8327_pad6_cfg; ++ +static struct ar8327_platform_data ap136_ar8327_data = { + .pad0_cfg = &ap136_ar8327_pad0_cfg, + .pad6_cfg = &ap136_ar8327_pad6_cfg, @@ -109,37 +85,49 @@ + }, }; --#ifdef CONFIG_PCI --static struct ath9k_platform_data ap136_ath9k_data; +-static struct spi_board_info ap136_spi_info[] = { +static struct mdio_board_info ap136_mdio0_info[] = { -+ { + { +- .bus_num = 0, +- .chip_select = 0, +- .max_speed_hz = 25000000, +- .modalias = "mx25l6405d", +- .controller_data = &ap136_spi0_data, +- } + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &ap136_ar8327_data, + }, -+}; + }; --static int ap136_pci_plat_dev_init(struct pci_dev *dev) +-static struct ath79_spi_platform_data ap136_spi_data = { +- .bus_num = 0, +- .num_chipselect = 1, +-}; +static void __init ap136_gmac_setup(void) - { -- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0) -- dev->dev.platform_data = &ap136_ath9k_data; ++{ + void __iomem *base; + u32 t; +-#ifdef CONFIG_PCI +-static struct ath9k_platform_data ap136_ath9k_data; ++ base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE); + +-static int ap136_pci_plat_dev_init(struct pci_dev *dev) +-{ +- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0) +- dev->dev.platform_data = &ap136_ath9k_data; ++ t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG); + - return 0; -} -+ base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE); ++ t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII); ++ t |= QCA955X_ETH_CFG_RGMII_EN; -static void __init ap136_pci_init(u8 *eeprom) -{ - memcpy(ap136_ath9k_data.eeprom_data, eeprom, - sizeof(ap136_ath9k_data.eeprom_data)); -+ t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG); -+ -+ t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII); -+ t |= QCA955X_ETH_CFG_RGMII_EN; -+ + __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG); - ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init); @@ -179,6 +167,16 @@ + mdiobus_register_board_info(ap136_mdio0_info, + ARRAY_SIZE(ap136_mdio0_info)); + ++ ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII; ++ ap136_ar8327_pad0_cfg.txclk_delay_en = true; ++ ap136_ar8327_pad0_cfg.rxclk_delay_en = true; ++ ap136_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1; ++ ap136_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2; ++ ++ ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII; ++ ap136_ar8327_pad6_cfg.rxclk_delay_en = true; ++ ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0; ++ + /* GMAC0 is connected to GMAC0 of the AR8327 switch via RGMII */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); |