summaryrefslogtreecommitdiff
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ar71xx/config-2.6.37204
-rw-r--r--target/linux/ar71xx/patches-2.6.37/001-ar71xx_core.patch50
-rw-r--r--target/linux/ar71xx/patches-2.6.37/002-ar71xx_pci.patch10
-rw-r--r--target/linux/ar71xx/patches-2.6.37/003-ar71xx_usb_host.patch58
-rw-r--r--target/linux/ar71xx/patches-2.6.37/004-ar71xx_spi_controller.patch26
-rw-r--r--target/linux/ar71xx/patches-2.6.37/005-ar71xx_mac_driver.patch21
-rw-r--r--target/linux/ar71xx/patches-2.6.37/006-ar71xx_wdt_driver.patch26
-rw-r--r--target/linux/ar71xx/patches-2.6.37/007-ar91xx_flash_driver.patch26
-rw-r--r--target/linux/ar71xx/patches-2.6.37/101-ksz8041_phy_driver.patch24
-rw-r--r--target/linux/ar71xx/patches-2.6.37/102-mtd_m25p80_add_myloader_parser.patch19
-rw-r--r--target/linux/ar71xx/patches-2.6.37/104-mtd_m25p80_add_redboot_parser.patch18
-rw-r--r--target/linux/ar71xx/patches-2.6.37/107-mtd-SST39VF6401B-support.patch29
-rw-r--r--target/linux/ar71xx/patches-2.6.37/108-mtd_fix_cfi_cmdset_0002_status_check.patch69
-rw-r--r--target/linux/ar71xx/patches-2.6.37/109-mtd-wrt160nl-trx-parser.patch44
-rw-r--r--target/linux/ar71xx/patches-2.6.37/110-usb-ehci-add-war-for-synopsys-hc-bug.patch22
-rw-r--r--target/linux/ar71xx/patches-2.6.37/111-mtd-cfi_cmdset_0002-force-word-write.patch61
-rw-r--r--target/linux/ar71xx/patches-2.6.37/120-dsa-trailer-tag-validation-fix.patch11
-rw-r--r--target/linux/ar71xx/patches-2.6.37/121-dsa-add-88e6063-driver.patch26
-rw-r--r--target/linux/ar71xx/patches-2.6.37/140-redboot_partition_scan.patch54
-rw-r--r--target/linux/ar71xx/patches-2.6.37/150-drivers-link-spi-before-mtd.patch12
-rw-r--r--target/linux/ar71xx/patches-2.6.37/151-spi-add-various-flags.patch19
-rw-r--r--target/linux/ar71xx/patches-2.6.37/152-rb4xx-spi-driver.patch25
-rw-r--r--target/linux/ar71xx/patches-2.6.37/153-spi-rb4xx-cpld-driver.patch26
-rw-r--r--target/linux/ar71xx/patches-2.6.37/200-rb4xx_nand_driver.patch21
-rw-r--r--target/linux/ar71xx/patches-2.6.37/201-ap83_spi_controller.patch27
-rw-r--r--target/linux/ar71xx/patches-2.6.37/202-spi_vsc7385_driver.patch24
-rw-r--r--target/linux/ar71xx/patches-2.6.37/203-pb44_spi_controller.patch27
-rw-r--r--target/linux/ar71xx/patches-2.6.37/205-wndr3700-usb-led-driver.patch26
-rw-r--r--target/linux/ar71xx/patches-2.6.37/206-nxp-74hc153-gpio-chip-driver.patch25
-rw-r--r--target/linux/ar71xx/patches-2.6.37/207-rb750-led-driver.patch23
-rw-r--r--target/linux/ar71xx/patches-2.6.37/208-rb750-nand-driver.patch21
-rw-r--r--target/linux/ar71xx/patches-2.6.37/300-mips_fw_myloader.patch22
-rw-r--r--target/linux/ar71xx/patches-2.6.37/400-2.6.35-fix-nand_scan_ident-options.patch22
-rw-r--r--target/linux/ar71xx/patches-2.6.37/500-ar933x-uart-driver.patch58
-rw-r--r--target/linux/ar71xx/patches-2.6.37/901-get_c0_compare_irq_function.patch29
35 files changed, 0 insertions, 1205 deletions
diff --git a/target/linux/ar71xx/config-2.6.37 b/target/linux/ar71xx/config-2.6.37
deleted file mode 100644
index f7a27f0..0000000
--- a/target/linux/ar71xx/config-2.6.37
+++ /dev/null
@@ -1,204 +0,0 @@
-CONFIG_AG71XX=y
-CONFIG_AG71XX_AR8216_SUPPORT=y
-# CONFIG_AG71XX_DEBUG is not set
-# CONFIG_AG71XX_DEBUG_FS is not set
-CONFIG_AR71XX_DEV_AP91_PCI=y
-CONFIG_AR71XX_DEV_AP94_PCI=y
-CONFIG_AR71XX_DEV_AR9XXX_WMAC=y
-CONFIG_AR71XX_DEV_DB120_PCI=y
-CONFIG_AR71XX_DEV_DSA=y
-CONFIG_AR71XX_DEV_GPIO_BUTTONS=y
-CONFIG_AR71XX_DEV_LEDS_GPIO=y
-CONFIG_AR71XX_DEV_M25P80=y
-CONFIG_AR71XX_DEV_PB42_PCI=y
-CONFIG_AR71XX_DEV_PB9X_PCI=y
-CONFIG_AR71XX_DEV_USB=y
-CONFIG_AR71XX_MACH_AP121=y
-CONFIG_AR71XX_MACH_AP81=y
-CONFIG_AR71XX_MACH_AP83=y
-CONFIG_AR71XX_MACH_AP96=y
-CONFIG_AR71XX_MACH_AW_NR580=y
-CONFIG_AR71XX_MACH_DB120=y
-CONFIG_AR71XX_MACH_DIR_600_A1=y
-CONFIG_AR71XX_MACH_DIR_615_C1=y
-CONFIG_AR71XX_MACH_DIR_825_B1=y
-CONFIG_AR71XX_MACH_EAP7660D=y
-CONFIG_AR71XX_MACH_JA76PF=y
-CONFIG_AR71XX_MACH_JWAP003=y
-CONFIG_AR71XX_MACH_MZK_W04NU=y
-CONFIG_AR71XX_MACH_MZK_W300NH=y
-CONFIG_AR71XX_MACH_NBG460N=y
-CONFIG_AR71XX_MACH_PB42=y
-CONFIG_AR71XX_MACH_PB44=y
-CONFIG_AR71XX_MACH_PB92=y
-CONFIG_AR71XX_MACH_RB4XX=y
-CONFIG_AR71XX_MACH_RB750=y
-CONFIG_AR71XX_MACH_TEW_632BRP=y
-CONFIG_AR71XX_MACH_TL_MR3X20=y
-CONFIG_AR71XX_MACH_TL_WA901ND=y
-CONFIG_AR71XX_MACH_TL_WA901ND_V2=y
-CONFIG_AR71XX_MACH_TL_WR1043ND=y
-CONFIG_AR71XX_MACH_TL_WR741ND=y
-CONFIG_AR71XX_MACH_TL_WR841N_V1=y
-CONFIG_AR71XX_MACH_TL_WR941ND=y
-CONFIG_AR71XX_MACH_UBNT=y
-CONFIG_AR71XX_MACH_WNDR3700=y
-CONFIG_AR71XX_MACH_WNR2000=y
-CONFIG_AR71XX_MACH_WP543=y
-CONFIG_AR71XX_MACH_WRT160NL=y
-CONFIG_AR71XX_MACH_WRT400N=y
-CONFIG_AR71XX_MACH_WZR_HP_AG300H=y
-CONFIG_AR71XX_MACH_WZR_HP_G300NH=y
-CONFIG_AR71XX_MACH_ZCN_1523H=y
-CONFIG_AR71XX_NVRAM=y
-CONFIG_AR71XX_PCI_ATH9K_FIXUP=y
-CONFIG_AR71XX_WDT=y
-CONFIG_AR8216_PHY=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ATHEROS_AR71XX=y
-# CONFIG_AUTO_IRQ_AFFINITY is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_FSNOTIFY is not set
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_GENERIC_PENDING_IRQ is not set
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_NXP_74HC153=y
-CONFIG_GPIO_PCF857X=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HARDIRQS_SW_RESEND is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-# CONFIG_HAVE_SPARSE_IRQ is not set
-CONFIG_HW_HAS_PCI=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_GPIO=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_SOURCE="../../root"
-CONFIG_IP17XX_PHY=y
-CONFIG_IRQ_CPU=y
-# CONFIG_IRQ_PER_CPU is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_RB750 is not set
-# CONFIG_LEDS_WNDR3700_USB is not set
-CONFIG_LOONGSON_UART_BASE=y
-# CONFIG_M25PXX_USE_FAST_READ is not set
-CONFIG_MACH_NO_WESTBRIDGE=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MICREL_PHY=y
-CONFIG_MIPS=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MTD_AR91XX_FLASH=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_WRT160NL_PARTS=y
-CONFIG_MYLOADER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6060=y
-CONFIG_NET_DSA_MV88E6063=y
-CONFIG_NET_DSA_TAG_TRAILER=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_QUOTACTL is not set
-CONFIG_RTL8306_PHY=y
-CONFIG_RTL8366RB_PHY=y
-CONFIG_RTL8366S_PHY=y
-CONFIG_RTL8366_SMI=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_AR933X=y
-CONFIG_SERIAL_AR933X_CONSOLE=y
-CONFIG_SERIAL_AR933X_NR_UARTS=2
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SOC_AR71XX=y
-CONFIG_SOC_AR724X=y
-CONFIG_SOC_AR913X=y
-CONFIG_SOC_AR933X=y
-CONFIG_SOC_AR934X=y
-CONFIG_SPI=y
-CONFIG_SPI_AP83=y
-CONFIG_SPI_AR71XX=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_PB44=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ar71xx/patches-2.6.37/001-ar71xx_core.patch b/target/linux/ar71xx/patches-2.6.37/001-ar71xx_core.patch
deleted file mode 100644
index 0adb218..0000000
--- a/target/linux/ar71xx/patches-2.6.37/001-ar71xx_core.patch
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -161,6 +161,13 @@ cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -W
- endif
- cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1
-
-+#
-+# Atheros AR71xx
-+#
-+core-$(CONFIG_ATHEROS_AR71XX) += arch/mips/ar71xx/
-+cflags-$(CONFIG_ATHEROS_AR71XX) += -I$(srctree)/arch/mips/include/asm/mach-ar71xx
-+load-$(CONFIG_ATHEROS_AR71XX) += 0xffffffff80060000
-+
- cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,)
- cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,)
- cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,)
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -65,6 +65,23 @@ config AR7
- Support for the Texas Instruments AR7 System-on-a-Chip
- family: TNETD7100, 7200 and 7300.
-
-+config ATHEROS_AR71XX
-+ bool "Atheros AR71xx based boards"
-+ select CEVT_R4K
-+ select CSRC_R4K
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ select ARCH_REQUIRE_GPIOLIB
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_HAS_CPU_MIPS32_R2
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select SYS_HAS_EARLY_PRINTK
-+ select MIPS_MACHINE
-+ help
-+ Support for Atheros AR71xx based boards.
-+
- config BCM47XX
- bool "Broadcom BCM47XX based boards"
- select CEVT_R4K
-@@ -717,6 +734,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
- endchoice
-
- source "arch/mips/alchemy/Kconfig"
-+source "arch/mips/ar71xx/Kconfig"
- source "arch/mips/bcm63xx/Kconfig"
- source "arch/mips/jazz/Kconfig"
- source "arch/mips/jz4740/Kconfig"
diff --git a/target/linux/ar71xx/patches-2.6.37/002-ar71xx_pci.patch b/target/linux/ar71xx/patches-2.6.37/002-ar71xx_pci.patch
deleted file mode 100644
index 3facce9..0000000
--- a/target/linux/ar71xx/patches-2.6.37/002-ar71xx_pci.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o
- obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
- obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
- ops-bcm63xx.o
-+obj-$(CONFIG_ATHEROS_AR71XX) += pci-ar71xx.o pci-ar724x.o
-
- #
- # These are still pretty much in the old state, watch, go blind.
diff --git a/target/linux/ar71xx/patches-2.6.37/003-ar71xx_usb_host.patch b/target/linux/ar71xx/patches-2.6.37/003-ar71xx_usb_host.patch
deleted file mode 100644
index be2e545..0000000
--- a/target/linux/ar71xx/patches-2.6.37/003-ar71xx_usb_host.patch
+++ /dev/null
@@ -1,58 +0,0 @@
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -118,6 +118,13 @@ config XPS_USB_HCD_XILINX
- config USB_FSL_MPH_DR_OF
- tristate
-
-+config USB_EHCI_AR71XX
-+ bool "USB EHCI support for AR71xx"
-+ depends on USB_EHCI_HCD && ATHEROS_AR71XX
-+ default y
-+ help
-+ Support for Atheros AR71xx built-in EHCI controller
-+
- config USB_EHCI_FSL
- bool "Support for Freescale on-chip EHCI USB controller"
- depends on USB_EHCI_HCD && FSL_SOC
-@@ -232,6 +239,13 @@ config USB_OHCI_HCD_OMAP3
- Enables support for the on-chip OHCI controller on
- OMAP3 and later chips.
-
-+config USB_OHCI_AR71XX
-+ bool "USB OHCI support for Atheros AR71xx"
-+ depends on USB_OHCI_HCD && ATHEROS_AR71XX
-+ default y
-+ help
-+ Support for Atheros AR71xx built-in OHCI controller
-+
- config USB_OHCI_HCD_PPC_SOC
- bool "OHCI support for on-chip PPC USB controller"
- depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1229,6 +1229,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER ehci_octeon_driver
- #endif
-
-+#ifdef CONFIG_USB_EHCI_AR71XX
-+#include "ehci-ar71xx.c"
-+#define PLATFORM_DRIVER ehci_ar71xx_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
- !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
- !defined(XILINX_OF_PLATFORM_DRIVER)
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1111,6 +1111,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER ohci_octeon_driver
- #endif
-
-+#ifdef CONFIG_USB_OHCI_AR71XX
-+#include "ohci-ar71xx.c"
-+#define PLATFORM_DRIVER ohci_hcd_ar71xx_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && \
- !defined(PLATFORM_DRIVER) && \
- !defined(OMAP1_PLATFORM_DRIVER) && \
diff --git a/target/linux/ar71xx/patches-2.6.37/004-ar71xx_spi_controller.patch b/target/linux/ar71xx/patches-2.6.37/004-ar71xx_spi_controller.patch
deleted file mode 100644
index 9802f10..0000000
--- a/target/linux/ar71xx/patches-2.6.37/004-ar71xx_spi_controller.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -53,6 +53,13 @@ if SPI_MASTER
-
- comment "SPI Master Controller Drivers"
-
-+config SPI_AR71XX
-+ tristate "Atheros AR71xx SPI Controller"
-+ depends on SPI_MASTER && ATHEROS_AR71XX
-+ select SPI_BITBANG
-+ help
-+ This is the SPI contoller driver for Atheros AR71xx.
-+
- config SPI_ATMEL
- tristate "Atmel SPI Controller"
- depends on (ARCH_AT91 || AVR32)
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -9,6 +9,7 @@ ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG
- obj-$(CONFIG_SPI_MASTER) += spi.o
-
- # SPI master controller drivers (bus)
-+obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o
- obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
- obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o
- obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
diff --git a/target/linux/ar71xx/patches-2.6.37/005-ar71xx_mac_driver.patch b/target/linux/ar71xx/patches-2.6.37/005-ar71xx_mac_driver.patch
deleted file mode 100644
index 909f2ed..0000000
--- a/target/linux/ar71xx/patches-2.6.37/005-ar71xx_mac_driver.patch
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -2068,6 +2068,8 @@ config ACENIC_OMIT_TIGON_I
-
- The safe and default value for this is N.
-
-+source drivers/net/ag71xx/Kconfig
-+
- config DL2K
- tristate "DL2000/TC902x-based Gigabit Ethernet support"
- depends on PCI
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -112,6 +112,7 @@ obj-$(CONFIG_STMMAC_ETH) += stmmac/
- # end link order section
- #
-
-+obj-$(CONFIG_AG71XX) += ag71xx/
- obj-$(CONFIG_SUNDANCE) += sundance.o
- obj-$(CONFIG_HAMACHI) += hamachi.o
- obj-$(CONFIG_NET) += Space.o loopback.o
diff --git a/target/linux/ar71xx/patches-2.6.37/006-ar71xx_wdt_driver.patch b/target/linux/ar71xx/patches-2.6.37/006-ar71xx_wdt_driver.patch
deleted file mode 100644
index 5f5c498..0000000
--- a/target/linux/ar71xx/patches-2.6.37/006-ar71xx_wdt_driver.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -930,6 +930,13 @@ config BCM63XX_WDT
- To compile this driver as a loadable module, choose M here.
- The module will be called bcm63xx_wdt.
-
-+config AR71XX_WDT
-+ tristate "Atheros AR71xx Watchdog Timer"
-+ depends on ATHEROS_AR71XX
-+ help
-+ Hardware driver for the built-in watchdog timer on the Atheros
-+ AR71xx SoCs.
-+
- # PARISC Architecture
-
- # POWERPC Architecture
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -115,6 +115,7 @@ obj-$(CONFIG_INDYDOG) += indydog.o
- obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
- obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
-+obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
- obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
diff --git a/target/linux/ar71xx/patches-2.6.37/007-ar91xx_flash_driver.patch b/target/linux/ar71xx/patches-2.6.37/007-ar91xx_flash_driver.patch
deleted file mode 100644
index 1bb504c..0000000
--- a/target/linux/ar71xx/patches-2.6.37/007-ar91xx_flash_driver.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -260,6 +260,13 @@ config MTD_BCM963XX
- Support for parsing CFE image tag and creating MTD partitions on
- Broadcom BCM63xx boards.
-
-+config MTD_AR91XX_FLASH
-+ tristate "Atheros AR91xx parallel flash support"
-+ depends on ATHEROS_AR71XX
-+ select MTD_COMPLEX_MAPPINGS
-+ help
-+ Parallel flash driver for the Atheros AR91xx based boards.
-+
- config MTD_DILNETPC
- tristate "CFI Flash device mapped on DIL/Net PC"
- depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -40,6 +40,7 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx2
- obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.o
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI) += pci.o
-+obj-$(CONFIG_MTD_AR91XX_FLASH) += ar91xx_flash.o
- obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
- obj-$(CONFIG_MTD_EDB7312) += edb7312.o
- obj-$(CONFIG_MTD_IMPA7) += impa7.o
diff --git a/target/linux/ar71xx/patches-2.6.37/101-ksz8041_phy_driver.patch b/target/linux/ar71xx/patches-2.6.37/101-ksz8041_phy_driver.patch
deleted file mode 100644
index 5f7840f..0000000
--- a/target/linux/ar71xx/patches-2.6.37/101-ksz8041_phy_driver.patch
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -118,6 +118,11 @@ config RTL8306_PHY
- tristate "Driver for Realtek RTL8306S switches"
- select SWCONFIG
-
-+config MICREL_PHY
-+ tristate "Drivers for Micrel/Kendin PHYs"
-+ ---help---
-+ Currently has a driver for the KSZ8041
-+
- config FIXED_PHY
- bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
- depends on PHYLIB=y
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi
- obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o
- obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o
- obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
-+obj-$(CONFIG_MICREL_PHY) += micrel.o
- obj-$(CONFIG_FIXED_PHY) += fixed.o
- obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
- obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
diff --git a/target/linux/ar71xx/patches-2.6.37/102-mtd_m25p80_add_myloader_parser.patch b/target/linux/ar71xx/patches-2.6.37/102-mtd_m25p80_add_myloader_parser.patch
deleted file mode 100644
index dcf7a6d..0000000
--- a/target/linux/ar71xx/patches-2.6.37/102-mtd_m25p80_add_myloader_parser.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -933,6 +933,16 @@ static int __devinit m25p_probe(struct s
- part_probes, &parts, 0);
- }
-
-+#ifdef CONFIG_MTD_MYLOADER_PARTS
-+ if (nr_parts <= 0) {
-+ static const char *part_probes[]
-+ = { "MyLoader", NULL, };
-+
-+ nr_parts = parse_mtd_partitions(&flash->mtd,
-+ part_probes, &parts, 0);
-+ }
-+#endif
-+
- if (nr_parts <= 0 && data && data->parts) {
- parts = data->parts;
- nr_parts = data->nr_parts;
diff --git a/target/linux/ar71xx/patches-2.6.37/104-mtd_m25p80_add_redboot_parser.patch b/target/linux/ar71xx/patches-2.6.37/104-mtd_m25p80_add_redboot_parser.patch
deleted file mode 100644
index bb0ff7d..0000000
--- a/target/linux/ar71xx/patches-2.6.37/104-mtd_m25p80_add_redboot_parser.patch
+++ /dev/null
@@ -1,18 +0,0 @@
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -943,6 +943,15 @@ static int __devinit m25p_probe(struct s
- }
- #endif
-
-+#ifdef CONFIG_MTD_REDBOOT_PARTS
-+ if (nr_parts <= 0) {
-+ static const char *part_probes[]
-+ = { "RedBoot", NULL, };
-+
-+ nr_parts = parse_mtd_partitions(&flash->mtd,
-+ part_probes, &parts, 0);
-+ }
-+#endif
- if (nr_parts <= 0 && data && data->parts) {
- parts = data->parts;
- nr_parts = data->nr_parts;
diff --git a/target/linux/ar71xx/patches-2.6.37/107-mtd-SST39VF6401B-support.patch b/target/linux/ar71xx/patches-2.6.37/107-mtd-SST39VF6401B-support.patch
deleted file mode 100644
index 0c3814c..0000000
--- a/target/linux/ar71xx/patches-2.6.37/107-mtd-SST39VF6401B-support.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -149,6 +149,7 @@
- #define SST39LF160 0x2782
- #define SST39VF1601 0x234b
- #define SST39VF3201 0x235b
-+#define SST39VF6401B 0x236d
- #define SST39WF1601 0x274b
- #define SST39WF1602 0x274a
- #define SST39LF512 0x00D4
-@@ -1582,6 +1583,18 @@ static const struct amd_flash_info jedec
- ERASEINFO(0x10000,64),
- }
- }, {
-+ .mfr_id = CFI_MFR_SST,
-+ .dev_id = SST39VF6401B,
-+ .name = "SST 39VF6401B",
-+ .devtypes = CFI_DEVICETYPE_X16,
-+ .uaddr = MTD_UADDR_0xAAAA_0x5555,
-+ .dev_size = SIZE_8MiB,
-+ .cmd_set = P_ID_AMD_STD,
-+ .nr_regions = 1,
-+ .regions = {
-+ ERASEINFO(0x10000,128)
-+ }
-+ }, {
- .mfr_id = CFI_MFR_ST,
- .dev_id = M29F800AB,
- .name = "ST M29F800AB",
diff --git a/target/linux/ar71xx/patches-2.6.37/108-mtd_fix_cfi_cmdset_0002_status_check.patch b/target/linux/ar71xx/patches-2.6.37/108-mtd_fix_cfi_cmdset_0002_status_check.patch
deleted file mode 100644
index e8e1ec0..0000000
--- a/target/linux/ar71xx/patches-2.6.37/108-mtd_fix_cfi_cmdset_0002_status_check.patch
+++ /dev/null
@@ -1,69 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1228,8 +1228,8 @@ static int __xipram do_write_oneword(str
- break;
- }
-
-- if (chip_ready(map, adr))
-- break;
-+ if (chip_good(map, adr, datum))
-+ goto enable_xip;
-
- /* Latency issues. Drop the lock, wait a while and retry */
- UDELAY(map, chip, adr, 1);
-@@ -1245,6 +1245,8 @@ static int __xipram do_write_oneword(str
-
- ret = -EIO;
- }
-+
-+ enable_xip:
- xip_enable(map, chip, adr);
- op_done:
- chip->state = FL_READY;
-@@ -1576,7 +1578,6 @@ static int cfi_amdstd_write_buffers(stru
- return 0;
- }
-
--
- /*
- * Handle devices with one erase region, that only implement
- * the chip erase command.
-@@ -1640,8 +1641,8 @@ static int __xipram do_erase_chip(struct
- chip->erase_suspended = 0;
- }
-
-- if (chip_ready(map, adr))
-- break;
-+ if (chip_good(map, adr, map_word_ff(map)))
-+ goto op_done;
-
- if (time_after(jiffies, timeo)) {
- printk(KERN_WARNING "MTD %s(): software timeout\n",
-@@ -1661,6 +1662,7 @@ static int __xipram do_erase_chip(struct
- ret = -EIO;
- }
-
-+ op_done:
- chip->state = FL_READY;
- xip_enable(map, chip, adr);
- put_chip(map, chip, adr);
-@@ -1728,9 +1730,9 @@ static int __xipram do_erase_oneblock(st
- chip->erase_suspended = 0;
- }
-
-- if (chip_ready(map, adr)) {
-+ if (chip_good(map, adr, map_word_ff(map))) {
- xip_enable(map, chip, adr);
-- break;
-+ goto op_done;
- }
-
- if (time_after(jiffies, timeo)) {
-@@ -1752,6 +1754,7 @@ static int __xipram do_erase_oneblock(st
- ret = -EIO;
- }
-
-+ op_done:
- chip->state = FL_READY;
- put_chip(map, chip, adr);
- mutex_unlock(&chip->mutex);
diff --git a/target/linux/ar71xx/patches-2.6.37/109-mtd-wrt160nl-trx-parser.patch b/target/linux/ar71xx/patches-2.6.37/109-mtd-wrt160nl-trx-parser.patch
deleted file mode 100644
index c8012f5..0000000
--- a/target/linux/ar71xx/patches-2.6.37/109-mtd-wrt160nl-trx-parser.patch
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -952,6 +952,16 @@ static int __devinit m25p_probe(struct s
- part_probes, &parts, 0);
- }
- #endif
-+
-+#ifdef CONFIG_MTD_WRT160NL_PARTS
-+ if (nr_parts <= 0) {
-+ static const char *part_probes[]
-+ = { "wrt160nl", NULL, };
-+
-+ nr_parts = parse_mtd_partitions(&flash->mtd,
-+ part_probes, &parts, 0);
-+ }
-+#endif
- if (nr_parts <= 0 && data && data->parts) {
- parts = data->parts;
- nr_parts = data->nr_parts;
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -181,6 +181,12 @@ config MTD_AR7_PARTS
- ---help---
- TI AR7 partitioning support
-
-+config MTD_WRT160NL_PARTS
-+ tristate "Linksys WRT160NL partitioning support"
-+ depends on MTD_PARTITIONS && AR71XX_MACH_WRT160NL
-+ ---help---
-+ Linksys WRT160NL partitioning support
-+
- config MTD_MYLOADER_PARTS
- tristate "MyLoader partition parsing"
- depends on MTD_PARTITIONS && (ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX)
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
- obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
-+obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
- obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
-
diff --git a/target/linux/ar71xx/patches-2.6.37/110-usb-ehci-add-war-for-synopsys-hc-bug.patch b/target/linux/ar71xx/patches-2.6.37/110-usb-ehci-add-war-for-synopsys-hc-bug.patch
deleted file mode 100644
index 905206d..0000000
--- a/target/linux/ar71xx/patches-2.6.37/110-usb-ehci-add-war-for-synopsys-hc-bug.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/drivers/usb/host/ehci-q.c
-+++ b/drivers/usb/host/ehci-q.c
-@@ -1193,6 +1193,9 @@ static void end_unlink_async (struct ehc
- ehci->reclaim = NULL;
- start_unlink_async (ehci, next);
- }
-+
-+ if (ehci->has_synopsys_hc_bug)
-+ writel((u32)ehci->async->qh_dma, &ehci->regs->async_next);
- }
-
- /* makes sure the async qh will become idle */
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -134,6 +134,7 @@ struct ehci_hcd { /* one per controlle
- unsigned amd_l1_fix:1;
- unsigned fs_i_thresh:1; /* Intel iso scheduling */
- unsigned use_dummy_qh:1; /* AMD Frame List table quirk*/
-+ unsigned has_synopsys_hc_bug:1; /* Synopsys HC */
-
- /* required for usb32 quirk */
- #define OHCI_CTRL_HCFS (3 << 6)
diff --git a/target/linux/ar71xx/patches-2.6.37/111-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ar71xx/patches-2.6.37/111-mtd-cfi_cmdset_0002-force-word-write.patch
deleted file mode 100644
index a972f8f..0000000
--- a/target/linux/ar71xx/patches-2.6.37/111-mtd-cfi_cmdset_0002-force-word-write.patch
+++ /dev/null
@@ -1,61 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -39,7 +39,7 @@
- #include <linux/mtd/xip.h>
-
- #define AMD_BOOTLOC_BUG
--#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
-
- #define MAX_WORD_RETRIES 3
-
-@@ -50,7 +50,9 @@
-
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#if !FORCE_WORD_WRITE
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#endif
- static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
- static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
- static void cfi_amdstd_sync (struct mtd_info *);
-@@ -186,6 +188,7 @@ static void fixup_amd_bootblock(struct m
- }
- #endif
-
-+#if !FORCE_WORD_WRITE
- static void fixup_use_write_buffers(struct mtd_info *mtd, void *param)
- {
- struct map_info *map = mtd->priv;
-@@ -195,6 +198,7 @@ static void fixup_use_write_buffers(stru
- mtd->write = cfi_amdstd_write_buffers;
- }
- }
-+#endif /* !FORCE_WORD_WRITE */
-
- /* Atmel chips don't use the same PRI format as AMD chips */
- static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
-@@ -1388,6 +1392,7 @@ static int cfi_amdstd_write_words(struct
- /*
- * FIXME: interleaved mode not tested, and probably not supported!
- */
-+#if !FORCE_WORD_WRITE
- static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
- unsigned long adr, const u_char *buf,
- int len)
-@@ -1498,7 +1503,6 @@ static int __xipram do_write_buffer(stru
- return ret;
- }
-
--
- static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
- {
-@@ -1577,6 +1581,7 @@ static int cfi_amdstd_write_buffers(stru
-
- return 0;
- }
-+#endif /* !FORCE_WORD_WRITE */
-
- /*
- * Handle devices with one erase region, that only implement
diff --git a/target/linux/ar71xx/patches-2.6.37/120-dsa-trailer-tag-validation-fix.patch b/target/linux/ar71xx/patches-2.6.37/120-dsa-trailer-tag-validation-fix.patch
deleted file mode 100644
index 3e3902b..0000000
--- a/target/linux/ar71xx/patches-2.6.37/120-dsa-trailer-tag-validation-fix.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/net/dsa/tag_trailer.c
-+++ b/net/dsa/tag_trailer.c
-@@ -87,7 +87,7 @@ static int trailer_rcv(struct sk_buff *s
-
- trailer = skb_tail_pointer(skb) - 4;
- if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 ||
-- (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00)
-+ (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00)
- goto out_drop;
-
- source_port = trailer[1] & 7;
diff --git a/target/linux/ar71xx/patches-2.6.37/121-dsa-add-88e6063-driver.patch b/target/linux/ar71xx/patches-2.6.37/121-dsa-add-88e6063-driver.patch
deleted file mode 100644
index 1a11a69..0000000
--- a/target/linux/ar71xx/patches-2.6.37/121-dsa-add-88e6063-driver.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/net/dsa/Kconfig
-+++ b/net/dsa/Kconfig
-@@ -36,6 +36,13 @@ config NET_DSA_MV88E6060
- This enables support for the Marvell 88E6060 ethernet switch
- chip.
-
-+config NET_DSA_MV88E6063
-+ bool "Marvell 88E6063 ethernet switch chip support"
-+ select NET_DSA_TAG_TRAILER
-+ ---help---
-+ This enables support for the Marvell 88E6063 ethernet switch
-+ chip
-+
- config NET_DSA_MV88E6XXX_NEED_PPU
- bool
- default n
---- a/net/dsa/Makefile
-+++ b/net/dsa/Makefile
-@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag
- # switch drivers
- obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o
- obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
-+obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
- obj-$(CONFIG_NET_DSA_MV88E6123_61_65) += mv88e6123_61_65.o
- obj-$(CONFIG_NET_DSA_MV88E6131) += mv88e6131.o
-
diff --git a/target/linux/ar71xx/patches-2.6.37/140-redboot_partition_scan.patch b/target/linux/ar71xx/patches-2.6.37/140-redboot_partition_scan.patch
deleted file mode 100644
index a09271a..0000000
--- a/target/linux/ar71xx/patches-2.6.37/140-redboot_partition_scan.patch
+++ /dev/null
@@ -1,54 +0,0 @@
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -78,31 +78,32 @@ static int parse_redboot_partitions(stru
- static char nullstring[] = "unallocated";
- #endif
-
-+ buf = vmalloc(master->erasesize);
-+ if (!buf)
-+ return -ENOMEM;
-+
-+ restart:
- if ( directory < 0 ) {
- offset = master->size + directory * master->erasesize;
-- while (master->block_isbad &&
-+ while (master->block_isbad &&
- master->block_isbad(master, offset)) {
- if (!offset) {
- nogood:
- printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
-+ vfree(buf);
- return -EIO;
- }
- offset -= master->erasesize;
- }
- } else {
- offset = directory * master->erasesize;
-- while (master->block_isbad &&
-+ while (master->block_isbad &&
- master->block_isbad(master, offset)) {
- offset += master->erasesize;
- if (offset == master->size)
- goto nogood;
- }
- }
-- buf = vmalloc(master->erasesize);
--
-- if (!buf)
-- return -ENOMEM;
--
- printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
- master->name, offset);
-
-@@ -174,6 +175,11 @@ static int parse_redboot_partitions(stru
- }
- if (i == numslots) {
- /* Didn't find it */
-+ if (offset + master->erasesize < master->size) {
-+ /* not at the end of the flash yet, maybe next block :) */
-+ directory++;
-+ goto restart;
-+ }
- printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
- master->name);
- ret = 0;
diff --git a/target/linux/ar71xx/patches-2.6.37/150-drivers-link-spi-before-mtd.patch b/target/linux/ar71xx/patches-2.6.37/150-drivers-link-spi-before-mtd.patch
deleted file mode 100644
index 1d9bf9e..0000000
--- a/target/linux/ar71xx/patches-2.6.37/150-drivers-link-spi-before-mtd.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -46,8 +46,8 @@ obj-y += macintosh/
- obj-$(CONFIG_IDE) += ide/
- obj-$(CONFIG_SCSI) += scsi/
- obj-$(CONFIG_ATA) += ata/
--obj-$(CONFIG_MTD) += mtd/
- obj-$(CONFIG_SPI) += spi/
-+obj-$(CONFIG_MTD) += mtd/
- obj-y += net/
- obj-$(CONFIG_ATM) += atm/
- obj-$(CONFIG_FUSION) += message/
diff --git a/target/linux/ar71xx/patches-2.6.37/151-spi-add-various-flags.patch b/target/linux/ar71xx/patches-2.6.37/151-spi-add-various-flags.patch
deleted file mode 100644
index b51f68f..0000000
--- a/target/linux/ar71xx/patches-2.6.37/151-spi-add-various-flags.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/include/linux/spi/spi.h
-+++ b/include/linux/spi/spi.h
-@@ -441,6 +441,8 @@ struct spi_transfer {
- dma_addr_t rx_dma;
-
- unsigned cs_change:1;
-+ unsigned verify:1;
-+ unsigned fast_write:1;
- u8 bits_per_word;
- u16 delay_usecs;
- u32 speed_hz;
-@@ -482,6 +484,7 @@ struct spi_message {
- struct spi_device *spi;
-
- unsigned is_dma_mapped:1;
-+ unsigned fast_read:1;
-
- /* REVISIT: we might want a flag affecting the behavior of the
- * last transfer ... allowing things like "read 16 bit length L"
diff --git a/target/linux/ar71xx/patches-2.6.37/152-rb4xx-spi-driver.patch b/target/linux/ar71xx/patches-2.6.37/152-rb4xx-spi-driver.patch
deleted file mode 100644
index 382cc38..0000000
--- a/target/linux/ar71xx/patches-2.6.37/152-rb4xx-spi-driver.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -290,6 +290,12 @@ config SPI_PXA2XX
- The driver can be configured to use any SSP port and additional
- documentation can be found a Documentation/spi/pxa2xx.
-
-+config SPI_RB4XX
-+ tristate "Mikrotik RB4XX SPI master"
-+ depends on SPI_MASTER && AR71XX_MACH_RB4XX
-+ help
-+ SPI controller driver for the Mikrotik RB4xx series boards.
-+
- config SPI_S3C24XX
- tristate "Samsung S3C24XX series SPI"
- depends on ARCH_S3C2410 && EXPERIMENTAL
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -51,6 +51,7 @@ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.
- obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o
- obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o
- obj-$(CONFIG_SPI_NUC900) += spi_nuc900.o
-+obj-$(CONFIG_SPI_RB4XX) += rb4xx_spi.o
-
- # special build for s3c24xx spi driver with fiq support
- spi_s3c24xx_hw-y := spi_s3c24xx.o
diff --git a/target/linux/ar71xx/patches-2.6.37/153-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-2.6.37/153-spi-rb4xx-cpld-driver.patch
deleted file mode 100644
index 0f6b861..0000000
--- a/target/linux/ar71xx/patches-2.6.37/153-spi-rb4xx-cpld-driver.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -446,6 +446,13 @@ config SPI_TLE62X0
- sysfs interface, with each line presented as a kind of GPIO
- exposing both switch control and diagnostic feedback.
-
-+config SPI_RB4XX_CPLD
-+ tristate "MikroTik RB4XX CPLD driver"
-+ depends on AR71XX_MACH_RB4XX
-+ help
-+ SPI driver for the Xilinx CPLD chip present on the
-+ MikroTik RB4xx boards.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -60,6 +60,7 @@ spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ)
- # ... add above this line ...
-
- # SPI protocol drivers (device/link on bus)
-+obj-$(CONFIG_SPI_RB4XX_CPLD) += spi_rb4xx_cpld.o
- obj-$(CONFIG_SPI_SPIDEV) += spidev.o
- obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o
- # ... add above this line ...
diff --git a/target/linux/ar71xx/patches-2.6.37/200-rb4xx_nand_driver.patch b/target/linux/ar71xx/patches-2.6.37/200-rb4xx_nand_driver.patch
deleted file mode 100644
index e7cd9bd..0000000
--- a/target/linux/ar71xx/patches-2.6.37/200-rb4xx_nand_driver.patch
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -532,4 +532,8 @@ config MTD_NAND_FSMC
- Enables support for NAND Flash chips on the ST Microelectronics
- Flexible Static Memory Controller (FSMC)
-
-+config MTD_NAND_RB4XX
-+ tristate "NAND flash driver for RouterBoard 4xx series"
-+ depends on MTD_NAND && AR71XX_MACH_RB4XX
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -33,6 +33,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27
- obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
- obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
-+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
- obj-$(CONFIG_MTD_ALAUDA) += alauda.o
- obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
diff --git a/target/linux/ar71xx/patches-2.6.37/201-ap83_spi_controller.patch b/target/linux/ar71xx/patches-2.6.37/201-ap83_spi_controller.patch
deleted file mode 100644
index d1b96e0..0000000
--- a/target/linux/ar71xx/patches-2.6.37/201-ap83_spi_controller.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -9,6 +9,7 @@ ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG
- obj-$(CONFIG_SPI_MASTER) += spi.o
-
- # SPI master controller drivers (bus)
-+obj-$(CONFIG_SPI_AP83) += ap83_spi.o
- obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o
- obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
- obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -53,6 +53,14 @@ if SPI_MASTER
-
- comment "SPI Master Controller Drivers"
-
-+config SPI_AP83
-+ tristate "Atheros AP83 specific SPI Controller"
-+ depends on SPI_MASTER && AR71XX_MACH_AP83
-+ select SPI_BITBANG
-+ help
-+ This is a specific SPI controller driver for the Atheros AP83
-+ reference board.
-+
- config SPI_AR71XX
- tristate "Atheros AR71xx SPI Controller"
- depends on SPI_MASTER && ATHEROS_AR71XX
diff --git a/target/linux/ar71xx/patches-2.6.37/202-spi_vsc7385_driver.patch b/target/linux/ar71xx/patches-2.6.37/202-spi_vsc7385_driver.patch
deleted file mode 100644
index 4fb7c1d..0000000
--- a/target/linux/ar71xx/patches-2.6.37/202-spi_vsc7385_driver.patch
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -461,6 +461,11 @@ config SPI_RB4XX_CPLD
- SPI driver for the Xilinx CPLD chip present on the
- MikroTik RB4xx boards.
-
-+config SPI_VSC7385
-+ tristate "Vitesse VSC7385 ethernet switch driver"
-+ help
-+ SPI driver for the Vitesse VSC7385 ethernet switch.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -63,6 +63,7 @@ spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ)
- # SPI protocol drivers (device/link on bus)
- obj-$(CONFIG_SPI_RB4XX_CPLD) += spi_rb4xx_cpld.o
- obj-$(CONFIG_SPI_SPIDEV) += spidev.o
-+obj-$(CONFIG_SPI_VSC7385) += spi_vsc7385.o
- obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o
- # ... add above this line ...
-
diff --git a/target/linux/ar71xx/patches-2.6.37/203-pb44_spi_controller.patch b/target/linux/ar71xx/patches-2.6.37/203-pb44_spi_controller.patch
deleted file mode 100644
index 9973874..0000000
--- a/target/linux/ar71xx/patches-2.6.37/203-pb44_spi_controller.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -68,6 +68,14 @@ config SPI_AR71XX
- help
- This is the SPI contoller driver for Atheros AR71xx.
-
-+config SPI_PB44
-+ tristate "Atheros PB44 board specific SPI controller"
-+ depends on SPI_MASTER && AR71XX_MACH_PB44
-+ select SPI_BITBANG
-+ help
-+ This is a specific SPI controller driver for the Atheros PB44
-+ reference board.
-+
- config SPI_ATMEL
- tristate "Atmel SPI Controller"
- depends on (ARCH_AT91 || AVR32)
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -26,6 +26,7 @@ obj-$(CONFIG_SPI_GPIO) += spi_gpio.o
- obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o
- obj-$(CONFIG_SPI_IMX) += spi_imx.o
- obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o
-+obj-$(CONFIG_SPI_PB44) += pb44_spi.o
- obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
- obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o
- obj-$(CONFIG_SPI_OMAP24XX) += omap2_mcspi.o
diff --git a/target/linux/ar71xx/patches-2.6.37/205-wndr3700-usb-led-driver.patch b/target/linux/ar71xx/patches-2.6.37/205-wndr3700-usb-led-driver.patch
deleted file mode 100644
index 9fb5ffa..0000000
--- a/target/linux/ar71xx/patches-2.6.37/205-wndr3700-usb-led-driver.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -377,6 +377,13 @@ config LEDS_TRIGGERS
- These triggers allow kernel events to drive the LEDs and can
- be configured via sysfs. If unsure, say Y.
-
-+config LEDS_WNDR3700_USB
-+ tristate "NETGEAR WNDR3700 USB LED driver"
-+ depends on LEDS_CLASS && AR71XX_MACH_WNDR3700
-+ help
-+ This option enables support for the USB LED found on the
-+ NETGEAR WNDR3700 board.
-+
- comment "LED Triggers"
-
- config LEDS_TRIGGER_TIMER
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -33,6 +33,7 @@ obj-$(CONFIG_LEDS_DA903X) += leds-da903
- obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
- obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
- obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
-+obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o
- obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o
- obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o
- obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o
diff --git a/target/linux/ar71xx/patches-2.6.37/206-nxp-74hc153-gpio-chip-driver.patch b/target/linux/ar71xx/patches-2.6.37/206-nxp-74hc153-gpio-chip-driver.patch
deleted file mode 100644
index 394996e..0000000
--- a/target/linux/ar71xx/patches-2.6.37/206-nxp-74hc153-gpio-chip-driver.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -401,4 +401,12 @@ config GPIO_JANZ_TTL
- This driver provides support for driving the pins in output
- mode only. Input mode is not supported.
-
-+comment "Other GPIO expanders"
-+
-+config GPIO_NXP_74HC153
-+ tristate "NXP 74HC153 Dual 4-input multiplexer"
-+ help
-+ Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
-+ provides a GPIO interface supporting inputs.
-+
- endif
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_GPIO_MAX7301) += max7301.o
- obj-$(CONFIG_GPIO_MAX732X) += max732x.o
- obj-$(CONFIG_GPIO_MC33880) += mc33880.o
- obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o
-+obj-$(CONFIG_GPIO_NXP_74HC153) += nxp_74hc153.o
- obj-$(CONFIG_GPIO_74X164) += 74x164.o
- obj-$(CONFIG_GPIO_PCA953X) += pca953x.o
- obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o
diff --git a/target/linux/ar71xx/patches-2.6.37/207-rb750-led-driver.patch b/target/linux/ar71xx/patches-2.6.37/207-rb750-led-driver.patch
deleted file mode 100644
index 34ec66d..0000000
--- a/target/linux/ar71xx/patches-2.6.37/207-rb750-led-driver.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -384,6 +384,10 @@ config LEDS_WNDR3700_USB
- This option enables support for the USB LED found on the
- NETGEAR WNDR3700 board.
-
-+config LEDS_RB750
-+ tristate "LED driver for the Mikrotik RouterBOARD 750"
-+ depends on LEDS_CLASS && AR71XX_MACH_RB750
-+
- comment "LED Triggers"
-
- config LEDS_TRIGGER_TIMER
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -40,6 +40,7 @@ obj-$(CONFIG_LEDS_LT3593) += leds-lt359
- obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o
- obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o
- obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
-+obj-$(CONFIG_LEDS_RB750) += leds-rb750.o
- obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
- obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
-
diff --git a/target/linux/ar71xx/patches-2.6.37/208-rb750-nand-driver.patch b/target/linux/ar71xx/patches-2.6.37/208-rb750-nand-driver.patch
deleted file mode 100644
index 0d1ed3c..0000000
--- a/target/linux/ar71xx/patches-2.6.37/208-rb750-nand-driver.patch
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -536,4 +536,8 @@ config MTD_NAND_RB4XX
- tristate "NAND flash driver for RouterBoard 4xx series"
- depends on MTD_NAND && AR71XX_MACH_RB4XX
-
-+config MTD_NAND_RB750
-+ tristate "NAND flash driver for the RouterBoard 750"
-+ depends on MTD_NAND && AR71XX_MACH_RB750
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx
- obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
- obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
-+obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o
- obj-$(CONFIG_MTD_ALAUDA) += alauda.o
- obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
diff --git a/target/linux/ar71xx/patches-2.6.37/300-mips_fw_myloader.patch b/target/linux/ar71xx/patches-2.6.37/300-mips_fw_myloader.patch
deleted file mode 100644
index aaefb71..0000000
--- a/target/linux/ar71xx/patches-2.6.37/300-mips_fw_myloader.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -184,6 +184,7 @@ endif
- #
- libs-$(CONFIG_ARC) += arch/mips/fw/arc/
- libs-$(CONFIG_CFE) += arch/mips/fw/cfe/
-+libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/
- libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/
- libs-y += arch/mips/fw/lib/
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -909,6 +909,9 @@ config MIPS_NILE4
- config MIPS_DISABLE_OBSOLETE_IDE
- bool
-
-+config MYLOADER
-+ bool
-+
- config SYNC_R4K
- bool
-
diff --git a/target/linux/ar71xx/patches-2.6.37/400-2.6.35-fix-nand_scan_ident-options.patch b/target/linux/ar71xx/patches-2.6.37/400-2.6.35-fix-nand_scan_ident-options.patch
deleted file mode 100644
index 0b36217..0000000
--- a/target/linux/ar71xx/patches-2.6.37/400-2.6.35-fix-nand_scan_ident-options.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/drivers/mtd/nand/rb4xx_nand.c
-+++ b/drivers/mtd/nand/rb4xx_nand.c
-@@ -223,7 +223,7 @@ static int __init rb4xx_nand_probe(struc
-
- platform_set_drvdata(pdev, info);
-
-- ret = nand_scan_ident(&info->mtd, 1);
-+ ret = nand_scan_ident(&info->mtd, 1, NULL);
- if (ret) {
- ret = -ENXIO;
- goto err_free_info;
---- a/drivers/mtd/nand/rb750_nand.c
-+++ b/drivers/mtd/nand/rb750_nand.c
-@@ -287,7 +287,7 @@ static int __init rb750_nand_probe(struc
-
- platform_set_drvdata(pdev, info);
-
-- ret = nand_scan_ident(&info->mtd, 1);
-+ ret = nand_scan_ident(&info->mtd, 1, NULL);
- if (ret) {
- ret = -ENXIO;
- goto err_free_info;
diff --git a/target/linux/ar71xx/patches-2.6.37/500-ar933x-uart-driver.patch b/target/linux/ar71xx/patches-2.6.37/500-ar933x-uart-driver.patch
deleted file mode 100644
index 04da7ad..0000000
--- a/target/linux/ar71xx/patches-2.6.37/500-ar933x-uart-driver.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-commit 24920fbc58c0183013db148f8be6fbc12d3bba9a
-Author: Gabor Juhos <juhosg@openwrt.org>
-Date: Sun Mar 27 12:04:36 2011 +0200
-
- serial: add driver for the built-in UART of the AR933X SoC
-
- Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -1632,4 +1632,27 @@ config SERIAL_ALTERA_UART_CONSOLE
- help
- Enable a Altera UART port to be the system console.
-
-+config SERIAL_AR933X
-+ bool "AR933X serial port support"
-+ depends on SOC_AR933X
-+ select SERIAL_CORE
-+ help
-+ If you have an Atheros AR933X SOC based board and want to use the
-+ built-in UART of the SoC, say Y to this option.
-+
-+config SERIAL_AR933X_CONSOLE
-+ bool "Console on AR933X serial port"
-+ depends on SERIAL_AR933X=y
-+ select SERIAL_CORE_CONSOLE
-+ help
-+ Enable a built-in UART port of the AR933X to be the system console.
-+
-+config SERIAL_AR933X_NR_UARTS
-+ int "Maximum number of AR933X serial ports"
-+ depends on SERIAL_AR933X
-+ default "2"
-+ help
-+ Set this to the number of serial ports you want the driver
-+ to support.
-+
- endmenu
---- a/drivers/serial/Makefile
-+++ b/drivers/serial/Makefile
-@@ -89,3 +89,5 @@ obj-$(CONFIG_SERIAL_ALTERA_UART) += alte
- obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o
- obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o
- obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o
-+obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o
-+
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -199,6 +199,9 @@
- /* TI OMAP-UART */
- #define PORT_OMAP 96
-
-+/* Atheros AR933X SoC */
-+#define PORT_AR933X 98
-+
- #ifdef __KERNEL__
-
- #include <linux/compiler.h>
diff --git a/target/linux/ar71xx/patches-2.6.37/901-get_c0_compare_irq_function.patch b/target/linux/ar71xx/patches-2.6.37/901-get_c0_compare_irq_function.patch
deleted file mode 100644
index 38d997e..0000000
--- a/target/linux/ar71xx/patches-2.6.37/901-get_c0_compare_irq_function.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -54,6 +54,7 @@
- #include <asm/types.h>
- #include <asm/stacktrace.h>
- #include <asm/uasm.h>
-+#include <asm/time.h>
-
- extern void check_wait(void);
- extern asmlinkage void r4k_wait(void);
-@@ -1578,6 +1579,8 @@ void __cpuinit per_cpu_trap_init(void)
- if (cpu_has_mips_r2) {
- cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
- cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
-+ if (get_c0_compare_irq)
-+ cp0_compare_irq = get_c0_compare_irq();
- cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
- if (cp0_perfcount_irq == cp0_compare_irq)
- cp0_perfcount_irq = -1;
---- a/arch/mips/include/asm/time.h
-+++ b/arch/mips/include/asm/time.h
-@@ -52,6 +52,7 @@ extern int (*perf_irq)(void);
- */
- #ifdef CONFIG_CEVT_R4K_LIB
- extern unsigned int __weak get_c0_compare_int(void);
-+extern unsigned int __weak get_c0_compare_irq(void);
- extern int r4k_clockevent_init(void);
- #endif
-