summaryrefslogtreecommitdiff
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ppc40x/config-3.6225
-rw-r--r--target/linux/ppc40x/patches-3.6/001-powerpc-add-missing-NULL-terminator-to-avoid-boot-pa.patch53
-rw-r--r--target/linux/ppc40x/patches-3.6/003-powerpc-add-EBC_BXCR-defines.patch27
-rw-r--r--target/linux/ppc40x/patches-3.6/004-magicbox.patch446
-rw-r--r--target/linux/ppc40x/patches-3.6/005-openrb.patch447
-rw-r--r--target/linux/ppc40x/patches-3.6/101-pata-magicbox-cf-driver.patch433
-rw-r--r--target/linux/ppc40x/patches-3.6/110-kilauea_openwrt_flashmap.patch55
-rw-r--r--target/linux/ppc40x/patches-3.6/120-usb-isp116x-hcd-add-of-binding.patch290
-rw-r--r--target/linux/ppc40x/patches-3.6/121-usb-isp116x-hcd-ppc405-register-access.patch111
9 files changed, 0 insertions, 2087 deletions
diff --git a/target/linux/ppc40x/config-3.6 b/target/linux/ppc40x/config-3.6
deleted file mode 100644
index 978a054..0000000
--- a/target/linux/ppc40x/config-3.6
+++ /dev/null
@@ -1,225 +0,0 @@
-CONFIG_405EP=y
-CONFIG_405EX=y
-CONFIG_40x=y
-# CONFIG_44x is not set
-CONFIG_4xx=y
-CONFIG_4xx_SOC=y
-# CONFIG_ACADIA is not set
-# CONFIG_ADVANCED_OPTIONS is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_BOUNCE=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd"
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_DECOMPRESS_LZMA=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_DTC=y
-# CONFIG_E200 is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EP405 is not set
-# CONFIG_EPAPR_BOOT is not set
-CONFIG_EXTRA_TARGETS="uImage"
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_GENERIC_TIME_VSYSCALL=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_GE_FPGA is not set
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAS_RAPIDIO is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-# CONFIG_HOTFOOT is not set
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_IBM_EMAC=y
-CONFIG_IBM_EMAC_EMAC4=y
-CONFIG_IBM_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_EMAC_RGMII=y
-CONFIG_IBM_EMAC_RXB=256
-CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0
-CONFIG_IBM_EMAC_TXB=256
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_IPIC is not set
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_ISA_DMA_API=y
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_KILAUEA=y
-CONFIG_LEDS_GPIO=m
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_MAGICBOX=y
-# CONFIG_MAKALU is not set
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MAX_ACTIVE_REGIONS=32
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_U3_HT_IRQS is not set
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_OF_PARTS=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_NEED_DMA_MAP_STATE=y
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NLS=m
-# CONFIG_NONSTATIC_KERNEL is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_NR_IRQS=512
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OPENRB=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_MSI=y
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_PPC40x_SIMPLE=y
-CONFIG_PPC4xx_MSI=y
-CONFIG_PPC4xx_PCI_EXPRESS=y
-# CONFIG_PPC64 is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_PPC_970_NAP is not set
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DVCS=0
-CONFIG_PPC_ADV_DEBUG_IACS=2
-CONFIG_PPC_ADV_DEBUG_REGS=y
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_CLOCK is not set
-CONFIG_PPC_DCR=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_EARLY_DEBUG is not set
-# CONFIG_PPC_EPAPR_HV_PIC is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_ICP_HV is not set
-# CONFIG_PPC_ICP_NATIVE is not set
-# CONFIG_PPC_ICS_RTAS is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_PPC_MPC106 is not set
-CONFIG_PPC_MSI_BITMAP=y
-CONFIG_PPC_OF=y
-# CONFIG_PPC_P7_NAP is not set
-CONFIG_PPC_PCI_CHOICE=y
-# CONFIG_PPC_RTAS is not set
-CONFIG_PPC_UDBG_16550=y
-CONFIG_PPC_WERROR=y
-# CONFIG_PPC_WSP is not set
-# CONFIG_PPC_XICS is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-# CONFIG_SERIAL_8250_RSA is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_SWIOTLB is not set
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_USB=m
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_COMMON=m
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_PCI=y
-# CONFIG_USB_OHCI_HCD_PLATFORM is not set
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_WALNUT is not set
-CONFIG_WORD_SIZE=32
-# CONFIG_XILINX_SYSACE is not set
-# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
diff --git a/target/linux/ppc40x/patches-3.6/001-powerpc-add-missing-NULL-terminator-to-avoid-boot-pa.patch b/target/linux/ppc40x/patches-3.6/001-powerpc-add-missing-NULL-terminator-to-avoid-boot-pa.patch
deleted file mode 100644
index 0bb2860..0000000
--- a/target/linux/ppc40x/patches-3.6/001-powerpc-add-missing-NULL-terminator-to-avoid-boot-pa.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 107b76e67aa0447fc4ea5594823f8ffd2699fbc7 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Thu, 20 Dec 2012 14:22:38 +0100
-Subject: [PATCH] powerpc: add missing NULL terminator to avoid boot panic on
- PPC40x
-
-The missing NULL terminator can cause a panic on
-PPC405 boards during boot:
-
- Linux/PowerPC load: console=ttyS0,115200 root=/dev/mtdblock1 rootfstype=squashfs,jffs2 noinitrd init=/etc/preinit
- Finalizing device tree... flat tree at 0x6a5160
- bootconsole [udbg0] enabled
- Page fault in user mode with in_atomic() = 1 mm = (null)
- NIP = c0275f50 MSR = fffffffe
- Oops: Weird page fault, sig: 11 [#1]
- PowerPC 40x Platform
- Modules linked in:
- NIP: c0275f50 LR: c0275f60 CTR: c0280000
- REGS: c0275eb0 TRAP: 636f7265 Not tainted (3.7.1)
- MSR: fffffffe <VEC,VSX,EE,PR,FP,ME,SE,BE,IR,DR,PMM,RI> CR: c06a6190 XER: 00000001
- TASK = c02662a8[0] 'swapper' THREAD: c0274000
- GPR00: c0275ec0 c000c658 c027c4bf 00000000 c0275ee0 c000a0ec c020a1a8 c020a1f0
- GPR08: c020f631 c020f404 c025f078 c025f080 c0275f10
- Call Trace:
- ---[ end trace 31fd0ba7d8756001 ]---
-
- Kernel panic - not syncing: Attempted to kill the idle task!
-
-The panic happens since commit 9597abe00c1bab2aedce6b49866bf6d1e81c9eed
-(sections: fix section conflicts in arch/powerpc), however the root
-cause of this is that the NULL terminator were not added in commit
-a4f740cf33f7f6c164bbde3c0cdbcc77b0c4997c (of/flattree: Add of_flat_dt_match()
-helper function).
-
-Cc: Grant Likely <grant.likely@secretlab.ca>
-Cc: <stable@vger.kernel.org>
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/powerpc/platforms/40x/ppc40x_simple.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/powerpc/platforms/40x/ppc40x_simple.c
-+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
-@@ -57,7 +57,8 @@ static const char *board[] __initdata =
- "amcc,makalu",
- "apm,klondike",
- "est,hotfoot",
-- "plathome,obs600"
-+ "plathome,obs600",
-+ NULL
- };
-
- static int __init ppc40x_probe(void)
diff --git a/target/linux/ppc40x/patches-3.6/003-powerpc-add-EBC_BXCR-defines.patch b/target/linux/ppc40x/patches-3.6/003-powerpc-add-EBC_BXCR-defines.patch
deleted file mode 100644
index 660b8bc..0000000
--- a/target/linux/ppc40x/patches-3.6/003-powerpc-add-EBC_BXCR-defines.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/arch/powerpc/boot/dcr.h
-+++ b/arch/powerpc/boot/dcr.h
-@@ -55,6 +55,14 @@ static const unsigned long sdram_bxcr[]
- #define EBC_BXCR(n) (n)
- #define EBC_BXCR_BAS 0xfff00000
- #define EBC_BXCR_BS 0x000e0000
-+#define EBC_BXCR_BS_1M 0x00000000
-+#define EBC_BXCR_BS_2M 0x00020000
-+#define EBC_BXCR_BS_4M 0x00040000
-+#define EBC_BXCR_BS_8M 0x00060000
-+#define EBC_BXCR_BS_16M 0x00080000
-+#define EBC_BXCR_BS_32M 0x000a0000
-+#define EBC_BXCR_BS_64M 0x000c0000
-+#define EBC_BXCR_BS_128M 0x000e0000
- #define EBC_BXCR_BANK_SIZE(reg) \
- (0x100000 << (((reg) & EBC_BXCR_BS) >> 17))
- #define EBC_BXCR_BU 0x00018000
-@@ -63,6 +71,9 @@ static const unsigned long sdram_bxcr[]
- #define EBC_BXCR_BU_WO 0x00010000
- #define EBC_BXCR_BU_RW 0x00018000
- #define EBC_BXCR_BW 0x00006000
-+#define EBC_BXCR_BW_8 0x00000000
-+#define EBC_BXCR_BW_16 0x00002000
-+#define EBC_BXCR_BW_32 0x00006000
- #define EBC_B0AP 0x10
- #define EBC_B1AP 0x11
- #define EBC_B2AP 0x12
diff --git a/target/linux/ppc40x/patches-3.6/004-magicbox.patch b/target/linux/ppc40x/patches-3.6/004-magicbox.patch
deleted file mode 100644
index 559270d..0000000
--- a/target/linux/ppc40x/patches-3.6/004-magicbox.patch
+++ /dev/null
@@ -1,446 +0,0 @@
---- /dev/null
-+++ b/arch/powerpc/boot/cuboot-magicbox.c
-@@ -0,0 +1,98 @@
-+/*
-+ * Old U-boot compatibility for Magicbox boards
-+ *
-+ * Author: Imre Kaloz <kaloz@openwrt.org>
-+ * Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include "ops.h"
-+#include "io.h"
-+#include "dcr.h"
-+#include "stdio.h"
-+#include "4xx.h"
-+#include "44x.h"
-+#include "cuboot.h"
-+
-+#define TARGET_4xx
-+#define TARGET_405EP
-+#include "ppcboot.h"
-+
-+static bd_t bd;
-+
-+static void fixup_perwe(void)
-+{
-+
-+#define DCRN_CPC0_PCI_BASE 0xf9
-+
-+ /* Turn on PerWE instead of PCIINT */
-+ mtdcr(DCRN_CPC0_PCI_BASE,
-+ mfdcr(DCRN_CPC0_PCI_BASE) | (0x80000000L >> 27));
-+
-+#undef DCRN_CPC0_PCI_BASE
-+}
-+
-+static void fixup_cf_card(void)
-+{
-+
-+#define CF_CS0_BASE 0xff100000
-+#define CF_CS1_BASE 0xff200000
-+
-+ /* PerCS1 (CF's CS0): base 0xff100000, 16-bit, rw */
-+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B1CR);
-+ mtdcr(DCRN_EBC0_CFGDATA, CF_CS0_BASE | EBC_BXCR_BS_1M |
-+ EBC_BXCR_BU_RW | EBC_BXCR_BW_16);
-+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B1AP);
-+ mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800);
-+
-+ /* PerCS2 (CF's CS1): base 0xff200000, 16-bit, rw */
-+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B2CR);
-+ mtdcr(DCRN_EBC0_CFGDATA, CF_CS1_BASE | EBC_BXCR_BS_1M |
-+ EBC_BXCR_BU_RW | EBC_BXCR_BW_16);
-+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B2AP);
-+ mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800);
-+
-+#undef CF_CS0_BASE
-+#undef CF_CS1_BASE
-+}
-+
-+static void magicbox_fixups(void)
-+{
-+ ibm405ep_fixup_clocks(bd.bi_procfreq / 8);
-+ ibm4xx_sdram_fixup_memsize();
-+
-+ /* Magicbox v1 has only one ethernet, one serial and no
-+ * CF slot -- detect it using it's fake enet1addr
-+ */
-+ if ((bd.bi_enet1addr[2] == 0x02) &&
-+ (bd.bi_enet1addr[3] == 0xfa) &&
-+ (bd.bi_enet1addr[4] == 0xf0) &&
-+ (bd.bi_enet1addr[5] == 0x80)) {
-+ void *devp;
-+ devp = finddevice("/plb/opb/ethernet@ef600900");
-+ del_node(devp);
-+ devp = finddevice("/plb/opb/serial@ef600400");
-+ del_node(devp);
-+ devp = finddevice("/plb/ebc/cf_card@ff100000");
-+ del_node(devp);
-+
-+ } else {
-+ fixup_perwe();
-+ fixup_cf_card();
-+ }
-+
-+ dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
-+}
-+
-+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-+ unsigned long r6, unsigned long r7)
-+{
-+ CUBOOT_INIT();
-+ platform_ops.fixups = magicbox_fixups;
-+ platform_ops.exit = ibm40x_dbcr_reset;
-+ fdt_init(_dtb_start);
-+ serial_console_init();
-+}
---- /dev/null
-+++ b/arch/powerpc/boot/dts/magicbox.dts
-@@ -0,0 +1,285 @@
-+/*
-+ * Device Tree Source for Magicbox boards
-+ *
-+ * Copyright 2008-2009 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright 2009 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * Based on walnut.dts
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without
-+ * any warranty of any kind, whether express or implied.
-+ */
-+
-+/dts-v1/;
-+
-+/ {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ model = "magicbox";
-+ compatible = "magicbox";
-+ dcr-parent = <&{/cpus/cpu@0}>;
-+
-+ aliases {
-+ ethernet0 = &EMAC0;
-+ ethernet1 = &EMAC1;
-+ serial0 = &UART0;
-+ serial1 = &UART1;
-+ };
-+
-+ cpus {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ cpu@0 {
-+ device_type = "cpu";
-+ model = "PowerPC,405EP";
-+ reg = <0x00000000>;
-+ clock-frequency = <0>; /* Filled in by zImage */
-+ timebase-frequency = <0>; /* Filled in by zImage */
-+ i-cache-line-size = <0x20>;
-+ d-cache-line-size = <0x20>;
-+ i-cache-size = <0x4000>;
-+ d-cache-size = <0x4000>;
-+ dcr-controller;
-+ dcr-access-method = "native";
-+ };
-+ };
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x00000000 0x00000000>; /* Filled in by zImage */
-+ };
-+
-+ UIC0: interrupt-controller {
-+ compatible = "ibm,uic";
-+ interrupt-controller;
-+ cell-index = <0>;
-+ dcr-reg = <0x0c0 0x009>;
-+ #address-cells = <0>;
-+ #size-cells = <0>;
-+ #interrupt-cells = <2>;
-+ };
-+
-+ plb {
-+ compatible = "ibm,plb3";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ clock-frequency = <0>; /* Filled in by zImage */
-+
-+ SDRAM0: memory-controller {
-+ compatible = "ibm,sdram-405ep";
-+ dcr-reg = <0x010 0x002>;
-+ };
-+
-+ MAL: mcmal {
-+ compatible = "ibm,mcmal-405ep", "ibm,mcmal";
-+ dcr-reg = <0x180 0x062>;
-+ num-tx-chans = <4>;
-+ num-rx-chans = <2>;
-+ interrupt-parent = <&UIC0>;
-+ interrupts = <
-+ 0xb 0x4 /* TXEOB */
-+ 0xc 0x4 /* RXEOB */
-+ 0xa 0x4 /* SERR */
-+ 0xd 0x4 /* TXDE */
-+ 0xe 0x4 /* RXDE */>;
-+ };
-+
-+ POB0: opb {
-+ compatible = "ibm,opb-405ep", "ibm,opb";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges = <0xef600000 0xef600000 0x00a00000>;
-+ dcr-reg = <0x0a0 0x005>;
-+ clock-frequency = <0>; /* Filled in by zImage */
-+
-+ UART0: serial@ef600300 {
-+ device_type = "serial";
-+ compatible = "ns16550";
-+ reg = <0xef600300 0x00000008>;
-+ virtual-reg = <0xef600300>;
-+ clock-frequency = <0>; /* Filled in by zImage */
-+ current-speed = <115200>;
-+ interrupt-parent = <&UIC0>;
-+ interrupts = <0x0 0x4>;
-+ };
-+
-+ UART1: serial@ef600400 {
-+ device_type = "serial";
-+ compatible = "ns16550";
-+ reg = <0xef600400 0x00000008>;
-+ virtual-reg = <0xef600400>;
-+ clock-frequency = <0>; /* Filled in by zImage */
-+ current-speed = <115200>;
-+ interrupt-parent = <&UIC0>;
-+ interrupts = <0x1 0x4>;
-+ };
-+
-+ IIC: i2c@ef600500 {
-+ compatible = "ibm,iic-405ep", "ibm,iic";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0xef600500 0x00000011>;
-+ interrupt-parent = <&UIC0>;
-+ interrupts = <0x2 0x4>;
-+
-+ dtt@48 {
-+ compatible = "national,lm75";
-+ reg = <0x48>;
-+ };
-+
-+ eeprom@50 {
-+ compatible = "at24,24c16";
-+ reg = <0x50>;
-+ };
-+ };
-+
-+ GPIO0: gpio-controller@ef600700 {
-+ compatible = "ibm,ppc4xx-gpio";
-+ reg = <0xef600700 0x00000020>;
-+ #gpio-cells = <2>;
-+ gpio-controller;
-+ };
-+
-+ EMAC0: ethernet@ef600800 {
-+ linux,network-index = <0x0>;
-+ device_type = "network";
-+ compatible = "ibm,emac-405ep", "ibm,emac";
-+ interrupt-parent = <&UIC0>;
-+ interrupts = <
-+ 0xf 0x4 /* Ethernet */
-+ 0x9 0x4 /* Ethernet Wake Up */>;
-+ local-mac-address = [000000000000]; /* Filled in by zImage */
-+ reg = <0xef600800 0x00000070>;
-+ mal-device = <&MAL>;
-+ mal-tx-channel = <0>;
-+ mal-rx-channel = <0>;
-+ cell-index = <0>;
-+ max-frame-size = <0x5dc>;
-+ rx-fifo-size = <0x1000>;
-+ tx-fifo-size = <0x800>;
-+ phy-mode = "mii";
-+ phy-map = <0x00000000>;
-+ };
-+
-+ EMAC1: ethernet@ef600900 {
-+ linux,network-index = <0x1>;
-+ device_type = "network";
-+ compatible = "ibm,emac-405ep", "ibm,emac";
-+ interrupt-parent = <&UIC0>;
-+ interrupts = <
-+ 0x11 0x4 /* Ethernet */
-+ 0x09 0x4 /* Ethernet Wake Up */>;
-+ local-mac-address = [000000000000]; /* Filled in by zImage */
-+ reg = <0xef600900 0x00000070>;
-+ mal-device = <&MAL>;
-+ mal-tx-channel = <2>;
-+ mal-rx-channel = <1>;
-+ cell-index = <1>;
-+ max-frame-size = <0x5dc>;
-+ rx-fifo-size = <0x1000>;
-+ tx-fifo-size = <0x800>;
-+ mdio-device = <&EMAC0>;
-+ phy-mode = "mii";
-+ phy-map = <0x00000001>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ user {
-+ label = "magicbox:red:user";
-+ gpios = <&GPIO0 2 1>;
-+ };
-+ };
-+ };
-+
-+ EBC0: ebc {
-+ compatible = "ibm,ebc-405ep", "ibm,ebc";
-+ dcr-reg = <0x012 0x002>;
-+ #address-cells = <2>;
-+ #size-cells = <1>;
-+ /* The ranges property is supplied by the bootwrapper
-+ * and is based on the firmware's configuration of the
-+ * EBC bridge
-+ */
-+ clock-frequency = <0>; /* Filled in by zImage */
-+
-+ cf_card@ff100000 {
-+ compatible = "magicbox-cf", "pata-magicbox-cf";
-+ reg = <0x00000000 0xff100000 0x00001000
-+ 0x00000000 0xff200000 0x00001000>;
-+ interrupt-parent = <&UIC0>;
-+ interrupts = <0x19 0x1 /* IRQ_TYPE_EDGE_RISING */ >;
-+ };
-+
-+ nor_flash@ffc00000 {
-+ compatible = "cfi-flash";
-+ bank-width = <2>;
-+ reg = <0x00000000 0xffc00000 0x00400000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ partition0@0 {
-+ label = "linux";
-+ reg = <0x0 0x140000>;
-+ };
-+ partition1@120000 {
-+ label = "rootfs";
-+ reg = <0x140000 0x280000>;
-+ };
-+ partition2@3c0000 {
-+ label = "u-boot";
-+ reg = <0x3c0000 0x30000>;
-+ read-only;
-+ };
-+ partition3@0 {
-+ label = "firmware";
-+ reg = <0x0 0x3c0000>;
-+ };
-+ };
-+ };
-+
-+ PCI0: pci@ec000000 {
-+ device_type = "pci";
-+ #interrupt-cells = <1>;
-+ #size-cells = <2>;
-+ #address-cells = <3>;
-+ compatible = "ibm,plb405ep-pci", "ibm,plb-pci";
-+ primary;
-+ reg = <0xeec00000 0x00000008 /* Config space access */
-+ 0xeed80000 0x00000004 /* IACK */
-+ 0xeed80000 0x00000004 /* Special cycle */
-+ 0xef480000 0x00000040>; /* Internal registers */
-+
-+ /* Outbound ranges, one memory and one IO,
-+ * later cannot be changed. Chip supports a second
-+ * IO range but we don't use it for now
-+ */
-+ ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
-+ 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
-+
-+ /* Inbound 2GB range starting at 0 */
-+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
-+
-+ interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
-+ interrupt-map = <
-+ /* IDSEL 1 */
-+ 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
-+
-+ /* IDSEL 2 */
-+ 0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8
-+
-+ /* IDSEL 3 */
-+ 0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8
-+
-+ /* IDSEL 4 */
-+ 0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8
-+ >;
-+ };
-+ };
-+
-+ chosen {
-+ linux,stdout-path = "/plb/opb/serial@ef600300";
-+ };
-+};
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -43,6 +43,7 @@ $(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -
- $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440
- $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440
- $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
-+$(obj)/cuboot-magicbox.o: BOOTCFLAGS += -mcpu=405
- $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
- $(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
- $(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405
-@@ -78,7 +79,8 @@ src-plat-y := of.c
- src-plat-$(CONFIG_40x) += fixed-head.S ep405.c cuboot-hotfoot.c \
- treeboot-walnut.c cuboot-acadia.c \
- cuboot-kilauea.c simpleboot.c \
-- virtex405-head.S virtex.c
-+ virtex405-head.S virtex.c \
-+ cuboot-magicbox.c
- src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \
- cuboot-bamboo.c cuboot-sam440ep.c \
- cuboot-sequoia.c cuboot-rainier.c \
-@@ -220,6 +222,7 @@ image-$(CONFIG_HOTFOOT) += cuImage.hot
- image-$(CONFIG_WALNUT) += treeImage.walnut
- image-$(CONFIG_ACADIA) += cuImage.acadia
- image-$(CONFIG_OBS600) += uImage.obs600
-+image-$(CONFIG_MAGICBOX) += cuImage.magicbox
-
- # Board ports in arch/powerpc/platform/44x/Kconfig
- image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony
---- a/arch/powerpc/platforms/40x/Kconfig
-+++ b/arch/powerpc/platforms/40x/Kconfig
-@@ -38,6 +38,16 @@ config KILAUEA
- help
- This option enables support for the AMCC PPC405EX evaluation board.
-
-+config MAGICBOX
-+ bool "Magicbox"
-+ depends on 40x
-+ default n
-+ select PPC40x_SIMPLE
-+ select 405EP
-+ select PCI
-+ help
-+ This option enables support for the Magicbox boards.
-+
- config MAKALU
- bool "Makalu"
- depends on 40x
---- a/arch/powerpc/platforms/40x/ppc40x_simple.c
-+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
-@@ -58,6 +58,7 @@ static const char *board[] __initdata =
- "apm,klondike",
- "est,hotfoot",
- "plathome,obs600",
-+ "magicbox",
- NULL
- };
-
diff --git a/target/linux/ppc40x/patches-3.6/005-openrb.patch b/target/linux/ppc40x/patches-3.6/005-openrb.patch
deleted file mode 100644
index 949ee89..0000000
--- a/target/linux/ppc40x/patches-3.6/005-openrb.patch
+++ /dev/null
@@ -1,447 +0,0 @@
---- /dev/null
-+++ b/arch/powerpc/boot/cuboot-openrb.c
-@@ -0,0 +1,94 @@
-+/*
-+ * Old U-boot compatibility for OpenRB boards
-+ *
-+ * Author: Gabor Juhos <juhosg@openwrt.org>
-+ * Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include "ops.h"
-+#include "io.h"
-+#include "dcr.h"
-+#include "stdio.h"
-+#include "4xx.h"
-+#include "44x.h"
-+#include "cuboot.h"
-+
-+#define TARGET_4xx
-+#define TARGET_405EP
-+#include "ppcboot.h"
-+
-+static bd_t bd;
-+
-+static void fixup_perwe(void)
-+{
-+#define DCRN_CPC0_PCI_BASE 0xf9
-+
-+ /* Turn on PerWE instead of PCIINT */
-+ mtdcr(DCRN_CPC0_PCI_BASE,
-+ mfdcr(DCRN_CPC0_PCI_BASE) | (0x80000000L >> 27));
-+
-+#undef DCRN_CPC0_PCI_BASE
-+}
-+
-+static void fixup_cf_card(void)
-+{
-+#define CF_CS0_BASE 0xff100000
-+#define CF_CS1_BASE 0xff200000
-+
-+ /* PerCS1 (CF's CS0): base 0xff100000, 16-bit, rw */
-+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B1CR);
-+ mtdcr(DCRN_EBC0_CFGDATA, CF_CS0_BASE | EBC_BXCR_BS_1M |
-+ EBC_BXCR_BU_RW | EBC_BXCR_BW_16);
-+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B1AP);
-+ mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800);
-+
-+ /* PerCS2 (CF's CS1): base 0xff200000, 16-bit, rw */
-+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B2CR);
-+ mtdcr(DCRN_EBC0_CFGDATA, CF_CS1_BASE | EBC_BXCR_BS_1M |
-+ EBC_BXCR_BU_RW | EBC_BXCR_BW_16);
-+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B2AP);
-+ mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800);
-+
-+#undef CF_CS0_BASE
-+#undef CF_CS1_BASE
-+}
-+
-+static void fixup_isp116x(void)
-+{
-+#define ISP116X_CS_BASE 0xf0000000
-+
-+ /* PerCS3 (ISP1160's CS): base 0xf0000000, size 32MB, 16-bit, rw */
-+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B3CR);
-+ mtdcr(DCRN_EBC0_CFGDATA, ISP116X_CS_BASE | EBC_BXCR_BS_32M |
-+ EBC_BXCR_BU_RW | EBC_BXCR_BW_16);
-+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B3AP);
-+ mtdcr(DCRN_EBC0_CFGDATA, 0x03016600);
-+
-+#undef ISP116X_CS_BASE
-+}
-+
-+static void openrb_fixups(void)
-+{
-+ ibm405ep_fixup_clocks(bd.bi_procfreq / 8);
-+ ibm4xx_sdram_fixup_memsize();
-+
-+ fixup_perwe();
-+ fixup_cf_card();
-+ fixup_isp116x();
-+
-+ dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
-+}
-+
-+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-+ unsigned long r6, unsigned long r7)
-+{
-+ CUBOOT_INIT();
-+ platform_ops.fixups = openrb_fixups;
-+ platform_ops.exit = ibm40x_dbcr_reset;
-+ fdt_init(_dtb_start);
-+ serial_console_init();
-+}
---- /dev/null
-+++ b/arch/powerpc/boot/dts/openrb.dts
-@@ -0,0 +1,291 @@
-+/*
-+ * Device Tree Source for OpenRB boards
-+ *
-+ * Copyright 2009 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright 2009 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * Based on walnut.dts
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without
-+ * any warranty of any kind, whether express or implied.
-+ */
-+
-+/dts-v1/;
-+
-+/ {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ model = "openrb";
-+ compatible = "openrb";
-+ dcr-parent = <&{/cpus/cpu@0}>;
-+
-+ aliases {
-+ ethernet0 = &EMAC0;
-+ ethernet1 = &EMAC1;
-+ serial0 = &UART0;
-+ serial1 = &UART1;
-+ };
-+
-+ cpus {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ cpu@0 {
-+ device_type = "cpu";
-+ model = "PowerPC,405EP";
-+ reg = <0x00000000>;
-+ clock-frequency = <0>; /* Filled in by zImage */
-+ timebase-frequency = <0>; /* Filled in by zImage */
-+ i-cache-line-size = <0x20>;
-+ d-cache-line-size = <0x20>;
-+ i-cache-size = <0x4000>;
-+ d-cache-size = <0x4000>;
-+ dcr-controller;
-+ dcr-access-method = "native";
-+ };
-+ };
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x00000000 0x00000000>; /* Filled in by zImage */
-+ };
-+
-+ UIC0: interrupt-controller {
-+ compatible = "ibm,uic";
-+ interrupt-controller;
-+ cell-index = <0>;
-+ dcr-reg = <0x0c0 0x009>;
-+ #address-cells = <0>;
-+ #size-cells = <0>;
-+ #interrupt-cells = <2>;
-+ };
-+
-+ plb {
-+ compatible = "ibm,plb3";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ clock-frequency = <0>; /* Filled in by zImage */
-+
-+ SDRAM0: memory-controller {
-+ compatible = "ibm,sdram-405ep";
-+ dcr-reg = <0x010 0x002>;
-+ };
-+
-+ MAL: mcmal {
-+ compatible = "ibm,mcmal-405ep", "ibm,mcmal";
-+ dcr-reg = <0x180 0x062>;
-+ num-tx-chans = <4>;
-+ num-rx-chans = <2>;
-+ interrupt-parent = <&UIC0>;
-+ interrupts = <
-+ 0xb 0x4 /* TXEOB */
-+ 0xc 0x4 /* RXEOB */
-+ 0xa 0x4 /* SERR */
-+ 0xd 0x4 /* TXDE */
-+ 0xe 0x4 /* RXDE */>;
-+ };
-+
-+ POB0: opb {
-+ compatible = "ibm,opb-405ep", "ibm,opb";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges = <0xef600000 0xef600000 0x00a00000>;
-+ dcr-reg = <0x0a0 0x005>;
-+ clock-frequency = <0>; /* Filled in by zImage */
-+
-+ UART0: serial@ef600300 {
-+ device_type = "serial";
-+ compatible = "ns16550";
-+ reg = <0xef600300 0x00000008>;
-+ virtual-reg = <0xef600300>;
-+ clock-frequency = <0>; /* Filled in by zImage */
-+ current-speed = <115200>;
-+ interrupt-parent = <&UIC0>;
-+ interrupts = <0x0 0x4>;
-+ };
-+
-+ UART1: serial@ef600400 {
-+ device_type = "serial";
-+ compatible = "ns16550";
-+ reg = <0xef600400 0x00000008>;
-+ virtual-reg = <0xef600400>;
-+ clock-frequency = <0>; /* Filled in by zImage */
-+ current-speed = <115200>;
-+ interrupt-parent = <&UIC0>;
-+ interrupts = <0x1 0x4>;
-+ };
-+
-+ IIC: i2c@ef600500 {
-+ compatible = "ibm,iic-405ep", "ibm,iic";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0xef600500 0x00000011>;
-+ interrupt-parent = <&UIC0>;
-+ interrupts = <0x2 0x4>;
-+
-+ eeprom@50 {
-+ compatible = "at24,24c16";
-+ reg = <0x50>;
-+ };
-+ };
-+
-+ GPIO0: gpio-controller@ef600700 {
-+ compatible = "ibm,ppc4xx-gpio";
-+ reg = <0xef600700 0x00000020>;
-+ #gpio-cells = <2>;
-+ gpio-controller;
-+ };
-+
-+ EMAC0: ethernet@ef600800 {
-+ linux,network-index = <0x0>;
-+ device_type = "network";
-+ compatible = "ibm,emac-405ep", "ibm,emac";
-+ interrupt-parent = <&UIC0>;
-+ interrupts = <
-+ 0xf 0x4 /* Ethernet */
-+ 0x9 0x4 /* Ethernet Wake Up */>;
-+ local-mac-address = [000000000000]; /* Filled in by zImage */
-+ reg = <0xef600800 0x00000070>;
-+ mal-device = <&MAL>;
-+ mal-tx-channel = <0>;
-+ mal-rx-channel = <0>;
-+ cell-index = <0>;
-+ max-frame-size = <0x5dc>;
-+ rx-fifo-size = <0x1000>;
-+ tx-fifo-size = <0x800>;
-+ phy-mode = "mii";
-+ phy-map = <0x00000000>;
-+ };
-+
-+ EMAC1: ethernet@ef600900 {
-+ linux,network-index = <0x1>;
-+ device_type = "network";
-+ compatible = "ibm,emac-405ep", "ibm,emac";
-+ interrupt-parent = <&UIC0>;
-+ interrupts = <
-+ 0x11 0x4 /* Ethernet */
-+ 0x09 0x4 /* Ethernet Wake Up */>;
-+ local-mac-address = [000000000000]; /* Filled in by zImage */
-+ reg = <0xef600900 0x00000070>;
-+ mal-device = <&MAL>;
-+ mal-tx-channel = <2>;
-+ mal-rx-channel = <1>;
-+ cell-index = <1>;
-+ max-frame-size = <0x5dc>;
-+ rx-fifo-size = <0x1000>;
-+ tx-fifo-size = <0x800>;
-+ mdio-device = <&EMAC0>;
-+ phy-mode = "mii";
-+ phy-map = <0x00000001>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ user {
-+ label = "openrb:green:user";
-+ gpios = <&GPIO0 2 1>;
-+ };
-+ };
-+ };
-+
-+ EBC0: ebc {
-+ compatible = "ibm,ebc-405ep", "ibm,ebc";
-+ dcr-reg = <0x012 0x002>;
-+ #address-cells = <2>;
-+ #size-cells = <1>;
-+ /* The ranges property is supplied by the bootwrapper
-+ * and is based on the firmware's configuration of the
-+ * EBC bridge
-+ */
-+ clock-frequency = <0>; /* Filled in by zImage */
-+
-+ isp116x@f0000000 {
-+ compatible = "isp116x-hcd";
-+ oc_enable;
-+ int_act_high;
-+ int_edge_triggered;
-+ reg = <0x00000000 0xf0000000 0x00000002 /* data */
-+ 0x00000000 0xf1000000 0x00000002 /* addr */ >;
-+ interrupt-parent = <&UIC0>;
-+ interrupts = <0x1b 0x1 /* IRQ_TYPE_EDGE_RISING */ >;
-+ };
-+
-+ cf_card@ff100000 {
-+ compatible = "magicbox-cf", "pata-magicbox-cf";
-+ reg = <0x00000000 0xff100000 0x00001000
-+ 0x00000000 0xff200000 0x00001000>;
-+ interrupt-parent = <&UIC0>;
-+ interrupts = <0x19 0x1 /* IRQ_TYPE_EDGE_RISING */ >;
-+ };
-+
-+ nor_flash@ff800000 {
-+ compatible = "cfi-flash";
-+ bank-width = <2>;
-+ reg = <0x00000000 0xff800000 0x00800000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ partition0@0 {
-+ label = "linux";
-+ reg = <0x0 0x140000>;
-+ };
-+ partition1@120000 {
-+ label = "rootfs";
-+ reg = <0x140000 0x680000>;
-+ };
-+ partition2@7c0000 {
-+ label = "u-boot";
-+ reg = <0x7c0000 0x30000>;
-+ read-only;
-+ };
-+ partition3@0 {
-+ label = "firmware";
-+ reg = <0x0 0x7c0000>;
-+ };
-+ };
-+ };
-+
-+ PCI0: pci@ec000000 {
-+ device_type = "pci";
-+ #interrupt-cells = <1>;
-+ #size-cells = <2>;
-+ #address-cells = <3>;
-+ compatible = "ibm,plb405ep-pci", "ibm,plb-pci";
-+ primary;
-+ reg = <0xeec00000 0x00000008 /* Config space access */
-+ 0xeed80000 0x00000004 /* IACK */
-+ 0xeed80000 0x00000004 /* Special cycle */
-+ 0xef480000 0x00000040>; /* Internal registers */
-+
-+ /* Outbound ranges, one memory and one IO,
-+ * later cannot be changed. Chip supports a second
-+ * IO range but we don't use it for now
-+ */
-+ ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
-+ 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
-+
-+ /* Inbound 2GB range starting at 0 */
-+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
-+
-+ interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
-+ interrupt-map = <
-+ /* IDSEL 1 */
-+ 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
-+
-+ /* IDSEL 2 */
-+ 0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8
-+
-+ /* IDSEL 3 */
-+ 0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8
-+
-+ /* IDSEL 4 */
-+ 0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8
-+ >;
-+ };
-+ };
-+
-+ chosen {
-+ linux,stdout-path = "/plb/opb/serial@ef600300";
-+ };
-+};
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -44,6 +44,7 @@ $(obj)/cuboot-taishan.o: BOOTCFLAGS += -
- $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440
- $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
- $(obj)/cuboot-magicbox.o: BOOTCFLAGS += -mcpu=405
-+$(obj)/cuboot-openrb.o: BOOTCFLAGS += -mcpu=405
- $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
- $(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
- $(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405
-@@ -80,7 +81,7 @@ src-plat-$(CONFIG_40x) += fixed-head.S e
- treeboot-walnut.c cuboot-acadia.c \
- cuboot-kilauea.c simpleboot.c \
- virtex405-head.S virtex.c \
-- cuboot-magicbox.c
-+ cuboot-magicbox.c cuboot-openrb
- src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \
- cuboot-bamboo.c cuboot-sam440ep.c \
- cuboot-sequoia.c cuboot-rainier.c \
-@@ -223,6 +224,7 @@ image-$(CONFIG_WALNUT) += treeImage.wa
- image-$(CONFIG_ACADIA) += cuImage.acadia
- image-$(CONFIG_OBS600) += uImage.obs600
- image-$(CONFIG_MAGICBOX) += cuImage.magicbox
-+image-$(CONFIG_OPENRB) += cuImage.openrb
-
- # Board ports in arch/powerpc/platform/44x/Kconfig
- image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony
---- a/arch/powerpc/platforms/40x/Kconfig
-+++ b/arch/powerpc/platforms/40x/Kconfig
-@@ -48,6 +48,16 @@ config MAGICBOX
- help
- This option enables support for the Magicbox boards.
-
-+config OPENRB
-+ bool "OpenRB"
-+ depends on 40x
-+ default n
-+ select PPC40x_SIMPLE
-+ select 405EP
-+ select PCI
-+ help
-+ This option enables support for the OpenRB boards.
-+
- config MAKALU
- bool "Makalu"
- depends on 40x
---- a/arch/powerpc/platforms/40x/ppc40x_simple.c
-+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
-@@ -59,6 +59,7 @@ static const char *board[] __initdata =
- "est,hotfoot",
- "plathome,obs600",
- "magicbox",
-+ "openrb",
- NULL
- };
-
diff --git a/target/linux/ppc40x/patches-3.6/101-pata-magicbox-cf-driver.patch b/target/linux/ppc40x/patches-3.6/101-pata-magicbox-cf-driver.patch
deleted file mode 100644
index 86960db..0000000
--- a/target/linux/ppc40x/patches-3.6/101-pata-magicbox-cf-driver.patch
+++ /dev/null
@@ -1,433 +0,0 @@
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -144,6 +144,16 @@ config PDC_ADMA
-
- If unsure, say N.
-
-+config PATA_MAGICBOX_CF
-+ tristate "Magicbox/OpenRB Compact Flash support"
-+ depends on MAGICBOX || OPENRB
-+ help
-+ This option enables support for a Compact Flash conected on
-+ the ppc405ep expansion bus. This driver had been written for
-+ the Magicbox v2 and OpenRB boards.
-+
-+ If unsure, say N.
-+
- config PATA_OCTEON_CF
- tristate "OCTEON Boot Bus Compact Flash support"
- depends on CPU_CAVIUM_OCTEON
---- a/drivers/ata/Makefile
-+++ b/drivers/ata/Makefile
-@@ -82,6 +82,7 @@ obj-$(CONFIG_PATA_AT91) += pata_at91.o
- obj-$(CONFIG_PATA_CMD640_PCI) += pata_cmd640.o
- obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o
- obj-$(CONFIG_PATA_IXP4XX_CF) += pata_ixp4xx_cf.o
-+obj-$(CONFIG_PATA_MAGICBOX_CF) += pata_magicbox_cf.o
- obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o
- obj-$(CONFIG_PATA_NS87410) += pata_ns87410.o
- obj-$(CONFIG_PATA_OPTI) += pata_opti.o
---- /dev/null
-+++ b/drivers/ata/pata_magicbox_cf.c
-@@ -0,0 +1,401 @@
-+/*
-+ * PATA/CompactFlash driver for the MagicBox v2/OpenRB boards.
-+ *
-+ * Copyright (C) 2009,2012 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * Based on the IDE driver by Wojtek Kaniewski <wojtekka@toxygen.net>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include <linux/ioport.h>
-+#include <linux/libata.h>
-+#include <linux/irq.h>
-+//#include <linux/of.h>
-+//#include <linux/of_device.h>
-+#include <linux/of_platform.h>
-+#include <scsi/scsi_host.h>
-+
-+#define DRV_DESC "PATA/CompactFlash driver for Magicbox/OpenRB boards"
-+#define DRV_NAME "pata_magicbox_cf"
-+#define DRV_VERSION "0.1.0"
-+
-+#define MAGICBOX_CF_REG_CMD (2 * ATA_REG_CMD)
-+#define MAGICBOX_CF_REG_DATA (2 * ATA_REG_DATA)
-+#define MAGICBOX_CF_REG_ERR (2 * ATA_REG_ERR)
-+#define MAGICBOX_CF_REG_FEATURE (2 * ATA_REG_FEATURE)
-+#define MAGICBOX_CF_REG_NSECT (2 * ATA_REG_NSECT)
-+#define MAGICBOX_CF_REG_LBAL (2 * ATA_REG_LBAL)
-+#define MAGICBOX_CF_REG_LBAM (2 * ATA_REG_LBAM)
-+#define MAGICBOX_CF_REG_LBAH (2 * ATA_REG_LBAH)
-+#define MAGICBOX_CF_REG_DEVICE (2 * ATA_REG_DEVICE)
-+#define MAGICBOX_CF_REG_STATUS (2 * ATA_REG_STATUS)
-+#define MAGICBOX_CF_REG_ALTSTATUS (2 * 6)
-+#define MAGICBOX_CF_REG_CTL (2 * 6)
-+
-+#define MAGICBOX_CF_MAXPORTS 1
-+
-+struct magicbox_cf_info {
-+ void __iomem *base;
-+ void __iomem *ctrl;
-+};
-+
-+static inline u8 magicbox_cf_inb(void __iomem *port)
-+{
-+ return (u8) (readw(port) >> 8) & 0xff;
-+}
-+
-+static inline void magicbox_cf_outb(void __iomem *port, u8 value)
-+{
-+ writew(value << 8, port);
-+}
-+
-+static int magicbox_cf_set_mode(struct ata_link *link,
-+ struct ata_device **error)
-+{
-+ struct ata_device *dev;
-+
-+ ata_for_each_dev(dev, link, ENABLED) {
-+ ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
-+ dev->pio_mode = XFER_PIO_0;
-+ dev->xfer_mode = XFER_PIO_0;
-+ dev->xfer_shift = ATA_SHIFT_PIO;
-+ dev->flags |= ATA_DFLAG_PIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static void magicbox_cf_exec_command(struct ata_port *ap,
-+ const struct ata_taskfile *tf)
-+{
-+ DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
-+
-+ magicbox_cf_outb(ap->ioaddr.command_addr, tf->command);
-+ ata_sff_pause(ap);
-+}
-+
-+static u8 magicbox_cf_check_status(struct ata_port *ap)
-+{
-+ u8 status;
-+
-+ status = magicbox_cf_inb(ap->ioaddr.status_addr);
-+
-+ DPRINTK("ata%u: status 0x%X, from %p\n", ap->print_id, status,
-+ ap->ioaddr.status_addr);
-+
-+ return status;
-+}
-+
-+static u8 magicbox_cf_check_altstatus(struct ata_port *ap)
-+{
-+ u8 altstatus;
-+
-+ altstatus = magicbox_cf_inb(ap->ioaddr.altstatus_addr);
-+
-+ DPRINTK("ata%u: altstatus 0x%X, from %p\n", ap->print_id,
-+ altstatus, ap->ioaddr.altstatus_addr);
-+
-+ return altstatus;
-+}
-+
-+static void magicbox_cf_dev_select(struct ata_port *ap, unsigned int device)
-+{
-+ /* Nothing to do. We are supporting one device only. */
-+}
-+
-+static void magicbox_cf_tf_load(struct ata_port *ap,
-+ const struct ata_taskfile *tf)
-+{
-+ struct ata_ioports *ioaddr = &ap->ioaddr;
-+ unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
-+
-+ if (tf->ctl != ap->last_ctl) {
-+ magicbox_cf_outb(ioaddr->ctl_addr, tf->ctl);
-+ ap->last_ctl = tf->ctl;
-+ ata_wait_idle(ap);
-+ }
-+
-+ if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
-+ magicbox_cf_outb(ioaddr->feature_addr, tf->hob_feature);
-+ magicbox_cf_outb(ioaddr->nsect_addr, tf->hob_nsect);
-+ magicbox_cf_outb(ioaddr->lbal_addr, tf->hob_lbal);
-+ magicbox_cf_outb(ioaddr->lbam_addr, tf->hob_lbam);
-+ magicbox_cf_outb(ioaddr->lbah_addr, tf->hob_lbah);
-+ VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
-+ tf->hob_feature,
-+ tf->hob_nsect,
-+ tf->hob_lbal,
-+ tf->hob_lbam,
-+ tf->hob_lbah);
-+ }
-+
-+ if (is_addr) {
-+ magicbox_cf_outb(ioaddr->feature_addr, tf->feature);
-+ magicbox_cf_outb(ioaddr->nsect_addr, tf->nsect);
-+ magicbox_cf_outb(ioaddr->lbal_addr, tf->lbal);
-+ magicbox_cf_outb(ioaddr->lbam_addr, tf->lbam);
-+ magicbox_cf_outb(ioaddr->lbah_addr, tf->lbah);
-+ VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
-+ tf->feature,
-+ tf->nsect,
-+ tf->lbal,
-+ tf->lbam,
-+ tf->lbah);
-+ }
-+
-+ if (tf->flags & ATA_TFLAG_DEVICE) {
-+ magicbox_cf_outb(ioaddr->device_addr, tf->device);
-+ VPRINTK("device 0x%X\n", tf->device);
-+ }
-+
-+ ata_wait_idle(ap);
-+}
-+
-+static void magicbox_cf_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
-+{
-+ struct ata_ioports *ioaddr = &ap->ioaddr;
-+
-+ tf->command = magicbox_cf_inb(ap->ioaddr.status_addr);
-+ tf->feature = magicbox_cf_inb(ioaddr->error_addr);
-+ tf->nsect = magicbox_cf_inb(ioaddr->nsect_addr);
-+ tf->lbal = magicbox_cf_inb(ioaddr->lbal_addr);
-+ tf->lbam = magicbox_cf_inb(ioaddr->lbam_addr);
-+ tf->lbah = magicbox_cf_inb(ioaddr->lbah_addr);
-+ tf->device = magicbox_cf_inb(ioaddr->device_addr);
-+ VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
-+ tf->feature,
-+ tf->nsect,
-+ tf->lbal,
-+ tf->lbam,
-+ tf->lbah);
-+
-+ if (tf->flags & ATA_TFLAG_LBA48) {
-+ magicbox_cf_outb(ioaddr->ctl_addr, tf->ctl | ATA_HOB);
-+ tf->hob_feature = magicbox_cf_inb(ioaddr->error_addr);
-+ tf->hob_nsect = magicbox_cf_inb(ioaddr->nsect_addr);
-+ tf->hob_lbal = magicbox_cf_inb(ioaddr->lbal_addr);
-+ tf->hob_lbam = magicbox_cf_inb(ioaddr->lbam_addr);
-+ tf->hob_lbah = magicbox_cf_inb(ioaddr->lbah_addr);
-+ magicbox_cf_outb(ioaddr->ctl_addr, tf->ctl);
-+ ap->last_ctl = tf->ctl;
-+ VPRINTK("hob: feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
-+ tf->feature,
-+ tf->nsect,
-+ tf->lbal,
-+ tf->lbam,
-+ tf->lbah);
-+ }
-+}
-+
-+static unsigned int magicbox_cf_data_xfer(struct ata_device *dev,
-+ unsigned char *buf,
-+ unsigned int buflen, int rw)
-+{
-+ struct ata_port *ap = dev->link->ap;
-+ unsigned int words = buflen >> 1;
-+ unsigned int i;
-+ u16 *buf16 = (u16 *) buf;
-+ void __iomem *mmio = ap->ioaddr.data_addr;
-+
-+ /* Transfer multiple of 2 bytes */
-+ if (rw == READ)
-+ for (i = 0; i < words; i++)
-+ buf16[i] = readw(mmio);
-+ else
-+ for (i = 0; i < words; i++)
-+ writew(buf16[i], mmio);
-+
-+ /* Transfer trailing 1 byte, if any. */
-+ if (unlikely(buflen & 0x01)) {
-+ u16 align_buf[1] = { 0 };
-+ unsigned char *trailing_buf = buf + buflen - 1;
-+
-+ if (rw == READ) {
-+ align_buf[0] = readw(mmio);
-+ memcpy(trailing_buf, align_buf, 1);
-+ } else {
-+ memcpy(align_buf, trailing_buf, 1);
-+ writew(align_buf[0], mmio);
-+ }
-+ words++;
-+ }
-+
-+ return words << 1;
-+}
-+
-+static void magicbox_cf_irq_on(struct ata_port *ap)
-+{
-+ /* Nothing to do. */
-+}
-+
-+static void magicbox_cf_irq_clear(struct ata_port *ap)
-+{
-+ /* Nothing to do. */
-+}
-+
-+static struct ata_port_operations magicbox_cf_port_ops = {
-+ .inherits = &ata_sff_port_ops,
-+
-+ .cable_detect = ata_cable_40wire,
-+ .set_mode = magicbox_cf_set_mode,
-+
-+ .sff_exec_command = magicbox_cf_exec_command,
-+ .sff_check_status = magicbox_cf_check_status,
-+ .sff_check_altstatus = magicbox_cf_check_altstatus,
-+ .sff_dev_select = magicbox_cf_dev_select,
-+ .sff_tf_load = magicbox_cf_tf_load,
-+ .sff_tf_read = magicbox_cf_tf_read,
-+ .sff_data_xfer = magicbox_cf_data_xfer,
-+
-+ .sff_irq_on = magicbox_cf_irq_on,
-+ .sff_irq_clear = magicbox_cf_irq_clear,
-+
-+ .port_start = ATA_OP_NULL,
-+};
-+
-+static struct scsi_host_template magicbox_cf_sht = {
-+ ATA_PIO_SHT(DRV_NAME),
-+};
-+
-+static inline void magicbox_cf_setup_port(struct ata_host *host)
-+{
-+ struct magicbox_cf_info *info = host->private_data;
-+ struct ata_port *ap;
-+
-+ ap = host->ports[0];
-+
-+ ap->ops = &magicbox_cf_port_ops;
-+ ap->pio_mask = ATA_PIO4;
-+ ap->flags |= ATA_FLAG_NO_ATAPI;
-+
-+ ap->ioaddr.cmd_addr = info->base + MAGICBOX_CF_REG_CMD;
-+ ap->ioaddr.data_addr = info->base + MAGICBOX_CF_REG_DATA;
-+ ap->ioaddr.error_addr = info->base + MAGICBOX_CF_REG_ERR;
-+ ap->ioaddr.feature_addr = info->base + MAGICBOX_CF_REG_FEATURE;
-+ ap->ioaddr.nsect_addr = info->base + MAGICBOX_CF_REG_NSECT;
-+ ap->ioaddr.lbal_addr = info->base + MAGICBOX_CF_REG_LBAL;
-+ ap->ioaddr.lbam_addr = info->base + MAGICBOX_CF_REG_LBAM;
-+ ap->ioaddr.lbah_addr = info->base + MAGICBOX_CF_REG_LBAH;
-+ ap->ioaddr.device_addr = info->base + MAGICBOX_CF_REG_DEVICE;
-+ ap->ioaddr.status_addr = info->base + MAGICBOX_CF_REG_STATUS;
-+ ap->ioaddr.command_addr = info->base + MAGICBOX_CF_REG_CMD;
-+
-+ ap->ioaddr.altstatus_addr = info->ctrl + MAGICBOX_CF_REG_ALTSTATUS;
-+ ap->ioaddr.ctl_addr = info->ctrl + MAGICBOX_CF_REG_CTL;
-+
-+ ata_port_desc(ap, "cmd 0x%p ctl 0x%p", ap->ioaddr.cmd_addr,
-+ ap->ioaddr.ctl_addr);
-+}
-+
-+static int __devinit magicbox_cf_of_probe(struct platform_device *op)
-+{
-+ struct magicbox_cf_info *info;
-+ struct ata_host *host;
-+ int irq;
-+ int ret = 0;
-+
-+ info = kzalloc(sizeof(struct magicbox_cf_info), GFP_KERNEL);
-+ if (info == NULL) {
-+ ret = -ENOMEM;
-+ goto err_exit;
-+ }
-+
-+ irq = irq_of_parse_and_map(op->dev.of_node, 0);
-+ if (irq < 0) {
-+ dev_err(&op->dev, "invalid irq\n");
-+ ret = -EINVAL;
-+ goto err_free_info;
-+ }
-+
-+ info->base = of_iomap(op->dev.of_node, 0);
-+ if (info->base == NULL) {
-+ ret = -ENOMEM;
-+ goto err_free_info;
-+ }
-+
-+ info->ctrl = of_iomap(op->dev.of_node, 1);
-+ if (info->ctrl == NULL) {
-+ ret = -ENOMEM;
-+ goto err_unmap_base;
-+ }
-+
-+ host = ata_host_alloc(&op->dev, MAGICBOX_CF_MAXPORTS);
-+ if (host == NULL) {
-+ ret = -ENOMEM;
-+ goto err_unmap_ctrl;
-+ }
-+
-+ host->private_data = info;
-+ magicbox_cf_setup_port(host);
-+
-+ ret = ata_host_activate(host, irq, ata_sff_interrupt,
-+ IRQF_TRIGGER_RISING, &magicbox_cf_sht);
-+ if (ret)
-+ goto err_unmap_ctrl;
-+
-+ dev_set_drvdata(&op->dev, host);
-+ return 0;
-+
-+ err_unmap_ctrl:
-+ iounmap(info->ctrl);
-+ err_unmap_base:
-+ iounmap(info->base);
-+ err_free_info:
-+ kfree(info);
-+ err_exit:
-+ return ret;
-+}
-+
-+static __devexit int magicbox_cf_of_remove(struct platform_device *op)
-+{
-+ struct ata_host *host = dev_get_drvdata(&op->dev);
-+ struct magicbox_cf_info *info = host->private_data;
-+
-+ ata_host_detach(host);
-+ iounmap(info->ctrl);
-+ iounmap(info->base);
-+ kfree(info);
-+
-+ return 0;
-+}
-+
-+static struct of_device_id magicbox_cf_of_match[] = {
-+ { .compatible = "pata-magicbox-cf", },
-+ {},
-+};
-+
-+static struct platform_driver magicbox_cf_of_platform_driver = {
-+ .probe = magicbox_cf_of_probe,
-+ .remove = __devexit_p(magicbox_cf_of_remove),
-+ .driver = {
-+ .name = DRV_NAME,
-+ .owner = THIS_MODULE,
-+ .of_match_table = magicbox_cf_of_match,
-+ },
-+};
-+
-+static int __init magicbox_cf_init(void)
-+{
-+ return platform_driver_register(&magicbox_cf_of_platform_driver);
-+}
-+
-+static void __exit magicbox_cf_exit(void)
-+{
-+ platform_driver_unregister(&magicbox_cf_of_platform_driver);
-+}
-+
-+module_init(magicbox_cf_init);
-+module_exit(magicbox_cf_exit);
-+
-+MODULE_DESCRIPTION(DRV_DESC);
-+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-+MODULE_LICENSE("GPL v2");
-+MODULE_VERSION(DRV_VERSION);
-+MODULE_DEVICE_TABLE(of, magicbox_cf_of_match);
diff --git a/target/linux/ppc40x/patches-3.6/110-kilauea_openwrt_flashmap.patch b/target/linux/ppc40x/patches-3.6/110-kilauea_openwrt_flashmap.patch
deleted file mode 100644
index ab44a2d..0000000
--- a/target/linux/ppc40x/patches-3.6/110-kilauea_openwrt_flashmap.patch
+++ /dev/null
@@ -1,55 +0,0 @@
---- a/arch/powerpc/boot/dts/kilauea.dts
-+++ b/arch/powerpc/boot/dts/kilauea.dts
-@@ -102,8 +102,8 @@
- compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2";
- dcr-reg = <0x010 0x002>;
- interrupt-parent = <&UIC2>;
-- interrupts = <0x5 0x4 /* ECC DED Error */
-- 0x6 0x4>; /* ECC SEC Error */
-+ interrupts = <0x5 0x4 /* ECC DED Error */
-+ 0x6 0x4>; /* ECC SEC Error */
- };
-
- CRYPTO: crypto@ef700000 {
-@@ -157,30 +157,30 @@
- reg = <0x00000000 0x00000000 0x04000000>;
- #address-cells = <1>;
- #size-cells = <1>;
-- partition@0 {
-+ partition0@0 {
- label = "kernel";
- reg = <0x00000000 0x001e0000>;
- };
-- partition@1e0000 {
-+ partition1@1e0000 {
- label = "dtb";
- reg = <0x001e0000 0x00020000>;
- };
-- partition@200000 {
-- label = "root";
-- reg = <0x00200000 0x00200000>;
-- };
-- partition@400000 {
-- label = "user";
-- reg = <0x00400000 0x03b60000>;
-+ partition2@200000 {
-+ label = "rootfs";
-+ reg = <0x00200000 0x03d60000>;
- };
-- partition@3f60000 {
-+ partition3@3f60000 {
- label = "env";
- reg = <0x03f60000 0x00040000>;
- };
-- partition@3fa0000 {
-+ partition4@3fa0000 {
- label = "u-boot";
- reg = <0x03fa0000 0x00060000>;
- };
-+ partition5@0 {
-+ label = "firmware";
-+ reg = <0x00000000 0x03f60000>;
-+ };
- };
-
- ndfc@1,0 {
diff --git a/target/linux/ppc40x/patches-3.6/120-usb-isp116x-hcd-add-of-binding.patch b/target/linux/ppc40x/patches-3.6/120-usb-isp116x-hcd-add-of-binding.patch
deleted file mode 100644
index f1ad806..0000000
--- a/target/linux/ppc40x/patches-3.6/120-usb-isp116x-hcd-add-of-binding.patch
+++ /dev/null
@@ -1,290 +0,0 @@
---- a/drivers/usb/host/isp116x-hcd.c
-+++ b/drivers/usb/host/isp116x-hcd.c
-@@ -1534,6 +1534,7 @@ static struct hc_driver isp116x_hc_drive
-
- /*----------------------------------------------------------------*/
-
-+#ifdef CONFIG_USB_ISP116X_HCD_PLATFORM
- static int isp116x_remove(struct platform_device *pdev)
- {
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
-@@ -1710,4 +1711,251 @@ static struct platform_driver isp116x_dr
- },
- };
-
--module_platform_driver(isp116x_driver);
-+static inline int isp116x_platform_register(void)
-+{
-+ return platform_driver_register(&isp116x_driver);
-+}
-+
-+static inline void isp116x_platform_unregister(void)
-+{
-+ platform_driver_unregister(&isp116x_driver);
-+}
-+#else
-+static inline int isp116x_platform_register(void) { return 0; };
-+static void isp116x_platform_unregister(void) {};
-+#endif /* CONFIG_USB_ISP116X_PLATFORM */
-+
-+/*-----------------------------------------------------------------*/
-+
-+#ifdef CONFIG_USB_ISP116X_HCD_OF
-+
-+/* TODO: rework platform probe instead of using a separate probe */
-+
-+#include <linux/of_platform.h>
-+
-+#ifdef USE_PLATFORM_DELAY
-+static void isp116x_of_delay(struct device *ddev, int delay)
-+{
-+ ndelay(delay);
-+}
-+#else
-+#define isp116x_of_delay NULL
-+#endif
-+
-+static int __devinit isp116x_of_probe(struct platform_device *op)
-+{
-+ struct device_node *dn = op->dev.of_node;
-+ struct usb_hcd *hcd;
-+ struct isp116x *isp116x;
-+ struct resource addr, data;
-+ struct isp116x_platform_data *board;
-+ void __iomem *addr_reg;
-+ void __iomem *data_reg;
-+ int irq;
-+ int ret = 0;
-+ unsigned long irqflags;
-+
-+ ret = of_address_to_resource(dn, 0, &data);
-+ if (ret)
-+ return ret;
-+
-+ ret = of_address_to_resource(dn, 1, &addr);
-+ if (ret)
-+ return ret;
-+
-+ board = kzalloc(sizeof(struct isp116x_platform_data), GFP_KERNEL);
-+ if (board == NULL)
-+ return -ENOMEM;
-+
-+ if (!request_mem_region(addr.start, resource_size(&addr), hcd_name)) {
-+ ret = -EBUSY;
-+ goto err_free_board;
-+ }
-+
-+ addr_reg = ioremap_nocache(addr.start, resource_size(&addr));
-+ if (addr_reg == NULL) {
-+ ret = -ENOMEM;
-+ goto err_release_addr;
-+ }
-+
-+ if (!request_mem_region(data.start, resource_size(&data), hcd_name)) {
-+ ret = -EBUSY;
-+ goto err_unmap_addr;
-+ }
-+
-+ data_reg = ioremap_nocache(data.start, resource_size(&data));
-+ if (data_reg == NULL) {
-+ ret = -ENOMEM;
-+ goto err_release_data;
-+ }
-+
-+ irq = irq_of_parse_and_map(dn, 0);
-+ if (irq == NO_IRQ) {
-+ ret = -EINVAL;
-+ goto err_unmap_data;
-+ }
-+
-+ /* allocate and initialize hcd */
-+ hcd = usb_create_hcd(&isp116x_hc_driver, &op->dev, dev_name(&op->dev));
-+ if (!hcd) {
-+ ret = -ENOMEM;
-+ goto err_irq_dispose;
-+ }
-+
-+ /* this rsrc_start is bogus */
-+ hcd->rsrc_start = addr.start;
-+ isp116x = hcd_to_isp116x(hcd);
-+ isp116x->data_reg = data_reg;
-+ isp116x->addr_reg = addr_reg;
-+ isp116x->board = board;
-+ spin_lock_init(&isp116x->lock);
-+ INIT_LIST_HEAD(&isp116x->async);
-+
-+ board->delay = isp116x_of_delay;
-+ if (of_get_property(dn, "sel15Kres", NULL))
-+ board->sel15Kres = 1;
-+ if (of_get_property(dn, "oc_enable", NULL))
-+ board->oc_enable = 1;
-+ if (of_get_property(dn, "remote_wakeup_enable", NULL))
-+ board->remote_wakeup_enable = 1;
-+
-+ if (of_get_property(dn, "int_act_high", NULL))
-+ board->int_act_high = 1;
-+ if (of_get_property(dn, "int_edge_triggered", NULL))
-+ board->int_edge_triggered = 1;
-+
-+ if (board->int_edge_triggered)
-+ irqflags = board->int_act_high ? IRQF_TRIGGER_RISING :
-+ IRQF_TRIGGER_FALLING;
-+ else
-+ irqflags = board->int_act_high ? IRQF_TRIGGER_HIGH :
-+ IRQF_TRIGGER_LOW;
-+
-+ ret = usb_add_hcd(hcd, irq, irqflags | IRQF_DISABLED);
-+ if (ret)
-+ goto err_put_hcd;
-+
-+ ret = create_debug_file(isp116x);
-+ if (ret) {
-+ ERR("Couldn't create debugfs entry\n");
-+ goto err_remove_hcd;
-+ }
-+
-+ return 0;
-+
-+ err_remove_hcd:
-+ usb_remove_hcd(hcd);
-+ err_put_hcd:
-+ usb_put_hcd(hcd);
-+ err_irq_dispose:
-+ irq_dispose_mapping(irq);
-+ err_unmap_data:
-+ iounmap(data_reg);
-+ err_release_data:
-+ release_mem_region(data.start, resource_size(&data));
-+ err_unmap_addr:
-+ iounmap(addr_reg);
-+ err_release_addr:
-+ release_mem_region(addr.start, resource_size(&addr));
-+ err_free_board:
-+ kfree(board);
-+ return ret;
-+}
-+
-+static __devexit int isp116x_of_remove(struct platform_device *op)
-+{
-+ struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
-+ struct isp116x *isp116x;
-+ struct resource res;
-+
-+ if (!hcd)
-+ return 0;
-+
-+ dev_set_drvdata(&op->dev, NULL);
-+
-+ isp116x = hcd_to_isp116x(hcd);
-+ remove_debug_file(isp116x);
-+ usb_remove_hcd(hcd);
-+
-+ irq_dispose_mapping(hcd->irq);
-+
-+ iounmap(isp116x->data_reg);
-+ (void) of_address_to_resource(op->dev.of_node, 0, &res);
-+ release_mem_region(res.start, resource_size(&res));
-+
-+ iounmap(isp116x->addr_reg);
-+ (void) of_address_to_resource(op->dev.of_node, 1, &res);
-+ release_mem_region(res.start, resource_size(&res));
-+
-+ kfree(isp116x->board);
-+ usb_put_hcd(hcd);
-+
-+ return 0;
-+}
-+
-+static struct of_device_id isp116x_of_match[] = {
-+ { .compatible = "isp116x-hcd", },
-+ {},
-+};
-+
-+static struct platform_driver isp116x_of_platform_driver = {
-+ .probe = isp116x_of_probe,
-+ .remove = __devexit_p(isp116x_of_remove),
-+ .driver = {
-+ .name = "isp116x-hcd-of",
-+ .owner = THIS_MODULE,
-+ .of_match_table = isp116x_of_match,
-+ },
-+};
-+
-+static int __init isp116x_of_register(void)
-+{
-+ return platform_driver_register(&isp116x_of_platform_driver);
-+}
-+
-+static void __exit isp116x_of_unregister(void)
-+{
-+ platform_driver_unregister(&isp116x_of_platform_driver);
-+}
-+
-+MODULE_DEVICE_TABLE(of, isp116x_of_match);
-+
-+#else
-+static inline int isp116x_of_register(void) { return 0; };
-+static void isp116x_of_unregister(void) {};
-+#endif /* CONFIG_USB_ISP116X_HCD_OF */
-+
-+/*-----------------------------------------------------------------*/
-+
-+static int __init isp116x_init(void)
-+{
-+ int ret;
-+
-+ if (usb_disabled())
-+ return -ENODEV;
-+
-+ INFO("driver %s, %s\n", hcd_name, DRIVER_VERSION);
-+ ret = isp116x_platform_register();
-+ if (ret)
-+ return ret;
-+
-+ ret = isp116x_of_register();
-+ if (ret)
-+ goto err_platform_unregister;
-+
-+ return 0;
-+
-+ err_platform_unregister:
-+ isp116x_platform_unregister();
-+ return ret;
-+}
-+
-+module_init(isp116x_init);
-+
-+static void __exit isp116x_cleanup(void)
-+{
-+ isp116x_of_unregister();
-+ isp116x_platform_unregister();
-+}
-+
-+module_exit(isp116x_cleanup);
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -260,6 +260,24 @@ config USB_ISP116X_HCD
- To compile this driver as a module, choose M here: the
- module will be called isp116x-hcd.
-
-+config USB_ISP116X_HCD_PLATFORM
-+ bool "ISP116X support for controllers on platform bus"
-+ depends on USB_ISP116X_HCD
-+ default n if PPC_OF
-+ default y
-+ ---help---
-+ Enables support for the ISP116x USB controller present on the
-+ platform bus.
-+
-+config USB_ISP116X_HCD_OF
-+ bool "ISP116X support for controllers on OF platform bus"
-+ depends on USB_ISP116X_HCD && PPC_OF
-+ default y if PPC_OF
-+ default n
-+ ---help---
-+ Enables support for the ISP116x USB controller present on the
-+ OpenFirmware platform bus.
-+
- config USB_ISP1760_HCD
- tristate "ISP 1760 HCD support"
- depends on USB && EXPERIMENTAL
diff --git a/target/linux/ppc40x/patches-3.6/121-usb-isp116x-hcd-ppc405-register-access.patch b/target/linux/ppc40x/patches-3.6/121-usb-isp116x-hcd-ppc405-register-access.patch
deleted file mode 100644
index c81d18a..0000000
--- a/target/linux/ppc40x/patches-3.6/121-usb-isp116x-hcd-ppc405-register-access.patch
+++ /dev/null
@@ -1,111 +0,0 @@
---- a/drivers/usb/host/isp116x.h
-+++ b/drivers/usb/host/isp116x.h
-@@ -364,22 +364,64 @@ struct isp116x_ep {
- #define IRQ_TEST() do{}while(0)
- #endif
-
-+#ifdef CONFIG_405EP
-+static inline void isp116x_writew(u16 val, void __iomem *addr)
-+{
-+ writew(cpu_to_le16(val), addr);
-+}
-+
-+static inline u16 isp116x_readw(void __iomem *addr)
-+{
-+ return le16_to_cpu(readw(addr));
-+}
-+
-+static inline void isp116x_raw_writew(u16 val, void __iomem *addr)
-+{
-+ writew(cpu_to_le16(val), addr);
-+}
-+
-+static inline u16 isp116x_raw_readw(void __iomem *addr)
-+{
-+ return le16_to_cpu(readw(addr));
-+}
-+#else
-+static inline void isp116x_writew(u16 val, void __iomem *addr)
-+{
-+ writew(val, addr);
-+}
-+
-+static inline u16 isp116x_readw(void __iomem *addr)
-+{
-+ return readw(addr);
-+}
-+
-+static inline void isp116x_raw_writew(u16 val, void __iomem *addr)
-+{
-+ __raw_writew(val, addr);
-+}
-+
-+static inline u16 isp116x_raw_readw(void __iomem *addr)
-+{
-+ return __raw_readw(addr);
-+}
-+#endif
-+
- static inline void isp116x_write_addr(struct isp116x *isp116x, unsigned reg)
- {
- IRQ_TEST();
-- writew(reg & 0xff, isp116x->addr_reg);
-+ isp116x_writew(reg & 0xff, isp116x->addr_reg);
- isp116x_delay(isp116x, 300);
- }
-
- static inline void isp116x_write_data16(struct isp116x *isp116x, u16 val)
- {
-- writew(val, isp116x->data_reg);
-+ isp116x_writew(val, isp116x->data_reg);
- isp116x_delay(isp116x, 150);
- }
-
- static inline void isp116x_raw_write_data16(struct isp116x *isp116x, u16 val)
- {
-- __raw_writew(val, isp116x->data_reg);
-+ isp116x_raw_writew(val, isp116x->data_reg);
- isp116x_delay(isp116x, 150);
- }
-
-@@ -387,7 +429,7 @@ static inline u16 isp116x_read_data16(st
- {
- u16 val;
-
-- val = readw(isp116x->data_reg);
-+ val = isp116x_readw(isp116x->data_reg);
- isp116x_delay(isp116x, 150);
- return val;
- }
-@@ -396,16 +438,16 @@ static inline u16 isp116x_raw_read_data1
- {
- u16 val;
-
-- val = __raw_readw(isp116x->data_reg);
-+ val = isp116x_raw_readw(isp116x->data_reg);
- isp116x_delay(isp116x, 150);
- return val;
- }
-
- static inline void isp116x_write_data32(struct isp116x *isp116x, u32 val)
- {
-- writew(val & 0xffff, isp116x->data_reg);
-+ isp116x_writew(val & 0xffff, isp116x->data_reg);
- isp116x_delay(isp116x, 150);
-- writew(val >> 16, isp116x->data_reg);
-+ isp116x_writew(val >> 16, isp116x->data_reg);
- isp116x_delay(isp116x, 150);
- }
-
-@@ -413,9 +455,9 @@ static inline u32 isp116x_read_data32(st
- {
- u32 val;
-
-- val = (u32) readw(isp116x->data_reg);
-+ val = (u32) isp116x_readw(isp116x->data_reg);
- isp116x_delay(isp116x, 150);
-- val |= ((u32) readw(isp116x->data_reg)) << 16;
-+ val |= ((u32) isp116x_readw(isp116x->data_reg)) << 16;
- isp116x_delay(isp116x, 150);
- return val;
- }