summaryrefslogtreecommitdiff
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/brcm47xx/base-files/etc/board.d/01_detect170
-rwxr-xr-xtarget/linux/brcm47xx/base-files/etc/init.d/netconfig238
-rw-r--r--target/linux/brcm47xx/base-files/etc/uci-defaults/03_network_migration6
3 files changed, 173 insertions, 241 deletions
diff --git a/target/linux/brcm47xx/base-files/etc/board.d/01_detect b/target/linux/brcm47xx/base-files/etc/board.d/01_detect
new file mode 100755
index 0000000..2623b57
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/etc/board.d/01_detect
@@ -0,0 +1,170 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006-2015 OpenWrt.org
+
+. /lib/functions/system.sh
+. /lib/functions/uci-defaults-new.sh
+
+detect_by_vlanports() {
+ local vlan0ports="$(nvram get vlan0ports)"
+ local vlan1ports="$(nvram get vlan1ports)"
+ local vlan2ports="$(nvram get vlan2ports)"
+ local cpuport="$(swconfig dev switch0 help 2>/dev/null | sed -ne "s|.*cpu @ \([0-9]*\).*|\1|p")"
+
+ if [ "${vlan0ports:0:9}" = "0 1 2 3 8" -a "${vlan1ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ] || \
+ [ "${vlan1ports:0:9}" = "0 1 2 3 8" -a "${vlan2ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ] || \
+ [ "${vlan2ports:0:9}" = "0 1 2 3 8" -a "${vlan1ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ];
+ then
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0"
+
+ elif [ "${vlan0ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \
+ [ "${vlan1ports:0:9}" = "0 1 2 3 5" -a "${vlan2ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \
+ [ "${vlan2ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ];
+ then
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+
+ else
+ logger -t "01_detect" "Unable to determine network configuration"
+ ucidef_set_interface_lan "eth0"
+ fi
+}
+
+detect_by_boardnum() {
+ local boardnum="$1"
+
+ case "$boardnum" in
+ # WAP54G, Sitecom WL-105b
+ "2" | \
+ "1024")
+ ucidef_set_interface_lan "eth0"
+ ;;
+
+ # Generic detection fallback
+ *)
+ detect_by_vlanports
+ ;;
+ esac
+}
+
+detect_by_boardtype() {
+ local boardtype="$1"
+ local boardnum="$2"
+
+ case "$boardtype" in
+ "bcm94710r4")
+ ucidef_set_interfaces_lan_wan "eth0" "eth1"
+ ;;
+
+ "0x0467")
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+ ;;
+
+ "0x042f" | \
+ "0x0472")
+ # WL-500gP
+ if [ "$boardnum" = "45" ]; then
+ ucidef_add_switch "switch0" \
+ "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
+
+ # Generic BCM94704
+ else
+ ucidef_set_interface_wan "eth1"
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
+
+ # MAC addresses on 4704 tend to be screwed up. Add a workaround here
+ local mac="$(nvram get et0macaddr)"
+ local pat="[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]"
+ pat="$pat:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]"
+ pat="$pat:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]"
+
+ case "$mac" in
+ $pat)
+ ucidef_set_interface_macaddr "lan" "$mac"
+ ucidef_set_interface_macaddr "wan" "$(macaddr_add "$mac" 1)"
+ ;;
+ esac
+ fi
+ ;;
+
+ # Buffalo WBR-B11 and Buffalo WBR-G54
+ "bcm94710ap")
+ ucidef_set_interface_wan "eth1"
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
+ ;;
+
+ *)
+ detect_by_boardnum "$boardnum"
+ ;;
+ esac
+}
+
+detect_by_model() {
+ local model="$1"
+ local boardtype="$2"
+ local boardnum="$3"
+
+ # Netgear WGT634U exception
+ if grep -sqE 'mtd0: 000(6|a)0000' /proc/mtd; then
+ ucidef_add_switch "switch0" \
+ "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
+ return
+ fi
+
+ case "$model" in
+ "Asus WLHDD" | \
+ "Asus WL300G")
+ ucidef_set_interface_lan "eth1"
+ ;;
+
+ "Asus WL330GE")
+ ucidef_add_switch "switch0" "4:lan" "5t@eth0"
+ ;;
+
+ "Asus WL500G" | \
+ "Asus WL500W" | \
+ "Microsoft MN-700")
+ ucidef_set_interfaces_lan_wan "eth0" "eth1"
+ ;;
+
+ "Asus WL500GP V2" | \
+ "Buffalo WHR-G125" | \
+ "Motorola WR850G" | \
+ "Siemens SE505 V2")
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+ ;;
+
+ "Asus WL700")
+ ucidef_add_switch "switch0" \
+ "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
+ ;;
+
+ "Dell TrueMobile 2300")
+ ucidef_set_interface_wan "eth1"
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
+ ;;
+
+ *)
+ detect_by_boardtype "$boardtype" "$boardnum"
+ ;;
+ esac
+}
+
+
+local model="$(sed -ne 's/^machine[ \t]*: //p' /proc/cpuinfo)"
+local boardtype="$(nvram get boardtype)"
+local boardnum="$(nvram get boardnum)"
+
+board_config_update
+
+ucidef_set_board_id "$boardtype${boardnum:+:$boardnum}"
+ucidef_set_model_name "$model"
+
+detect_by_model "$model" "$boardtype" "$boardnum"
+
+board_config_flush
diff --git a/target/linux/brcm47xx/base-files/etc/init.d/netconfig b/target/linux/brcm47xx/base-files/etc/init.d/netconfig
deleted file mode 100755
index 1890cd0..0000000
--- a/target/linux/brcm47xx/base-files/etc/init.d/netconfig
+++ /dev/null
@@ -1,238 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006 OpenWrt.org
-
-START=05
-
-start() {
- [ -e /etc/config/network ] && {
- local batch
-
- config_cb() {
- case "$1" in
- switch)
- option_cb() {
- case "$1" in
- vlan[0-9]|vlan1[0-5])
- local id="${1#vlan}"
- local ports="${2%\*}"
- append batch "delete network.eth0.${1}${N}"
- append batch "set network.eth0_${id}=switch_vlan${N}"
- append batch "set network.eth0_${id}.device=eth0${N}"
- append batch "set network.eth0_${id}.vlan=${id}${N}"
- append batch "set network.eth0_${id}.ports='${ports}'${N}"
- ;;
- esac
- }
- ;;
- switch_vlan)
- option_cb() { :; }
- batch=""
- ;;
- esac
- }
-
- config_load network
-
- [ -n "$batch" ] && {
- logger -t netconfig "migrating switch config to new format ..."
- echo "$batch${N}commit network" | uci batch
- }
-
- exit 0
- }
-
- mkdir -p /etc/config
-
- local cpuport=5
- [ -e /sbin/swconfig ] && cpuport=$(swconfig dev switch0 help 2>/dev/null | sed -ne "s|.*cpu @ \([0-9]*\).*|\1|p")
- local switchname=eth0
- [ -e /sbin/swconfig ] && switchname=$(swconfig dev switch0 help 2>/dev/null | sed -ne "s|switch0: \([^\\\\(]*\).*|\1|p")
- local model=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo)
-
- local network_defs=`(
- if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
- # WGT634u
- echo boardtype=wgt634u
- else
- strings "$(find_mtd_part nvram)"
- fi
- ) | awk -v cpuport="$cpuport" -v model="$model" '
- function macinc(mac, maca, i, result) {
- split(mac, maca, ":")
- for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
- if (++maca[6] > 0xff) {
- maca[5]++
- maca[6] = 0
- }
- for (i = 1; i <= 6; i++) {
- if (i != 1) result = result ":"
- result = result sprintf("%02x", maca[i])
- }
- return result
- }
-
- BEGIN {
- FS="="
- c["lan_ifname"]="eth0.1"
- c["wan_ifname"]="eth0.2"
- c["vlan1ports"]="1 2 3 4 5t"
- c["vlan2ports"]="0 5t"
- for (i = 0; i < 6; i++) {
- if (mac_check != "") mac_check = mac_check ":"
- mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
- }
- if (cpuport == "8") {
- c["vlan1ports"]="1 2 3 4 8t"
- c["vlan2ports"]="0 8t"
- }
- }
-
- ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) || \
- ($1 ~ /^vlan[0-9]{1,2}ports$/) {
- nvram[$1] = $2
- }
-
- END {
- if (((nvram["vlan0ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan1ports"] ~ /^4 8/ && (cpuport == "8"))) || \
- ((nvram["vlan1ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan2ports"] ~ /^4 8/ && (cpuport == "8"))) || \
- ((nvram["vlan2ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan1ports"] ~ /^4 8/ && (cpuport == "8")))) {
- c["vlan1ports"] = "0 1 2 3 8t"
- c["vlan2ports"] = "4 8t"
- }
- if (((nvram["vlan0ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan1ports"] ~ /^4 5/ && (cpuport == "5"))) || \
- ((nvram["vlan1ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan2ports"] ~ /^4 5/ && (cpuport == "5"))) || \
- ((nvram["vlan2ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan1ports"] ~ /^4 5/ && (cpuport == "5")))) {
- c["vlan1ports"] = "0 1 2 3 5t"
- c["vlan2ports"] = "4 5t"
- }
- if ((model == "Asus WLHDD") || (model == "Asus WL300G")) {
- c["wan_ifname"] = ""
- c["lan_ifname"] = "eth1"
- }
- if (model == "Asus WL330GE") {
- c["wan_ifname"] = ""
- c["lan_ifname"] = "eth0.1"
- c["vlan1ports"] = "4 5t"
- c["vlan2ports"] = ""
- }
- if ((model == "Asus WL500G") || (model == "Microsoft MN-700")) {
- c["wan_ifname"] = "eth1"
- c["lan_ifname"] = "eth0"
- }
- if ((model == "Asus WL500GP V2") || (model == "Buffalo WHR-G125")) {
- c["vlan1ports"] = "0 1 2 3 5t"
- c["vlan2ports"] = "4 5t"
- }
- if (model == "Dell TrueMobile 2300") {
- c["lan_ifname"] = "eth0"
- c["wan_ifname"] = "eth1"
- c["vlan1ports"] = "0 1 2 3 4 5"
- c["vlan2ports"] = ""
- }
- if (nvram["boardtype"] == "bcm94710r4") {
- # Toshiba WRC-1000
- c["lan_ifname"] = "eth0"
- c["wan_ifname"] = "eth1"
- }
- if ((nvram["boardtype"] == "wgt634u") || (nvram["boardtype"] == "0x0467")) {
- c["vlan1ports"] = "0 1 2 3 5t"
- c["vlan2ports"] = "4 5t"
- }
- if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
- if (nvram["boardnum"] == "45") {
- # WL-500gP
- c["vlan1ports"] = "1 2 3 4 5t"
- c["vlan2ports"] = "0 5t"
- } else {
- # Generic BCM94704
- c["vlan1ports"] = "0 1 2 3 4 5"
- c["vlan2ports"] = ""
- c["lan_ifname"] = "eth0"
- c["wan_ifname"] = "eth1"
-
- # MAC addresses on 4704 tend to be screwed up. Add a workaround here
- if (nvram["et0macaddr"] ~ mac_check) {
- c["lan_macaddr"] = nvram["et0macaddr"]
- c["wan_macaddr"] = macinc(c["lan_macaddr"])
- }
- }
- }
- # Buffalo WBR-B11 and Buffalo WBR-G54
- if (nvram["boardtype"] == "bcm94710ap") {
- c["vlan1ports"] = "0 1 2 3 4 5"
- c["vlan2ports"] = ""
- c["lan_ifname"] = "eth0"
- c["wan_ifname"] = "eth1"
- }
-
- # WAP54G
- if ((nvram["boardnum"] == "2") || \
- (nvram["boardnum"] == "1024")) {
- c["lan_ifname"]="eth0"
- c["wan_ifname"]=""
- }
-
- # Sitecom WL-105b
- if ((nvram["boardum"] == "2") && \
- (nvram["GemtekPmonVer"] == "1")) {
- c["lan_ifname"]="eth0"
- c["wan_ifname"]=""
- }
-
- # ASUS WL-700gE
- # These are actually same as defaults above. For some reason this script applies
- # Generic BCM94704 settings instead so we revert to proper settings here.
- # Hopefully someone will fix this properly soon.
- if (model == "Asus WL700") {
- c["lan_ifname"]="eth0.1"
- c["wan_ifname"]="eth0.2"
- c["vlan1ports"]="1 2 3 4 5t"
- c["vlan2ports"]="0 5t"
- }
- if ((model == "Motorola WR850G") || (model == "Siemens SE505 V2")) {
- c["vlan1ports"]="0 1 2 3 5t"
- c["vlan2ports"]="4 5t"
- }
- if (model == "Asus WL500W") {
- c["lan_ifname"] = "eth0"
- c["wan_ifname"] = "eth1"
- c["vlan1ports"] = "0 1 2 3 4 5"
- c["vlan2ports"] = ""
- }
- print "local vlan1ports=\"" c["vlan1ports"] "\";"
- print "local vlan2ports=\"" c["vlan2ports"] "\";"
- print "local lan_ifname=\"" c["lan_ifname"] "\";"
- print "local lan_macaddr=\"" c["lan_macaddr"] "\";"
- print "local wan_ifname=\"" c["wan_ifname"] "\";"
- print "local wan_macaddr=\"" c["wan_macaddr"] "\";"
- }'`
-
- . /lib/functions/uci-defaults.sh
-
- touch /etc/config/network
-
- eval "$network_defs"
-
- [ -n "$vlan1ports" -o -n "$vlan2ports" ] && {
- local cfg=`ucidef_add_switch "$switchname" 1 1`
- [ -n "$cfg" ] && uci rename network.$cfg=eth0
- [ -n "$vlan1ports" ] && {
- cfg=`ucidef_add_switch_vlan "$switchname" 1 "$vlan1ports"`
- }
- [ -n "$vlan2ports" ] && {
- cfg=`ucidef_add_switch_vlan "$switchname" 2 "$vlan2ports"`
- }
- }
-
- ucidef_set_interface_loopback
-
- ucidef_set_interface_lan "$lan_ifname"
- [ -n "$lan_macaddr" ] && ucidef_set_interface_macaddr lan "$lan_macaddr"
-
- [ -n "$wan_ifname" ] && {
- ucidef_set_interface_wan "$wan_ifname"
- [ -n "$wan_macaddr" ] && ucidef_set_interface_macaddr wan "$wan_macaddr"
- }
-
- uci commit network
-}
diff --git a/target/linux/brcm47xx/base-files/etc/uci-defaults/03_network_migration b/target/linux/brcm47xx/base-files/etc/uci-defaults/03_network_migration
index cef5add..912fe96 100644
--- a/target/linux/brcm47xx/base-files/etc/uci-defaults/03_network_migration
+++ b/target/linux/brcm47xx/base-files/etc/uci-defaults/03_network_migration
@@ -1,6 +1,6 @@
#!/bin/sh
#
-# Copyright (C) 2014 OpenWrt.org
+# Copyright (C) 2014-2015 OpenWrt.org
#
uci show network | grep "\.vlan=0"
@@ -15,8 +15,8 @@ local wan_proto="$(uci -q get network.wan.proto)"
local wan_ipaddr="$(uci -q get network.wan.ipaddr)"
local wan_netmask="$(uci -q get network.wan.netmask)"
-rm /etc/config/network
-/etc/init.d/netconfig start
+echo "" > /etc/config/network
+config_generate
uci set network.lan.proto=$lan_proto
uci set network.lan.ipaddr=$lan_ipaddr