diff options
Diffstat (limited to 'target/linux')
| -rwxr-xr-x[-rw-r--r--] | target/linux/lantiq/base-files/etc/board.d/01_leds (renamed from target/linux/lantiq/base-files/etc/uci-defaults/01_leds) | 8 | ||||
| -rwxr-xr-x | target/linux/lantiq/base-files/etc/board.d/02_network | 149 | ||||
| -rw-r--r-- | target/linux/lantiq/base-files/etc/uci-defaults/02_network | 211 |
3 files changed, 154 insertions, 214 deletions
diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/01_leds b/target/linux/lantiq/base-files/etc/board.d/01_leds index b9e5420..2dc641e 100644..100755 --- a/target/linux/lantiq/base-files/etc/uci-defaults/01_leds +++ b/target/linux/lantiq/base-files/etc/board.d/01_leds @@ -1,12 +1,14 @@ #!/bin/sh # -# Copyright (C) 2011 OpenWrt.org +# Copyright (C) 2011-2015 OpenWrt.org # based on ar71xx # -. /lib/functions/uci-defaults.sh +. /lib/functions/uci-defaults-new.sh . /lib/functions/lantiq.sh +board_config_update + [ -e "/sys/class/leds/wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "wifi" "phy0tpt" [ -e "/sys/class/leds/usb" ] && ucidef_set_led_usbdev "usb" "usb" "usb" "1-1" [ -e "/sys/class/leds/usb2" ] && ucidef_set_led_usbdev "usb2" "usb2" "usb2" "2-1" @@ -72,6 +74,6 @@ for a in `ls /sys/class/leds/`; do [ $? -eq 0 ] && ucidef_set_led_default $a $a $a `cat /sys/class/leds/$a/brightness` done -ucidef_commit_leds +board_config_flush exit 0 diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network new file mode 100755 index 0000000..039f57b --- /dev/null +++ b/target/linux/lantiq/base-files/etc/board.d/02_network @@ -0,0 +1,149 @@ +#!/bin/sh +# +# Copyright (C) 2011-2015 OpenWrt.org +# + +. /lib/functions/uci-defaults-new.sh +. /lib/functions/system.sh +. /lib/functions/lantiq.sh + +board_config_update + +vpi=1 +vci=32 +annex="a" +encaps="llc" +payload="bridged" +lan_mac="" +wan_mac="" + +board=$(lantiq_board_name) + +case "$board" in +# adm6996 +ARV4510PW) + lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_add_switch "switch0" \ + "3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t@eth0" + ;; + +ARV4520PW) + ucidef_add_switch "switch0" \ + "3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t@eth0" + ;; + +ACMP252|GIGASX76X) + ucidef_add_switch "switch0" \ + "4:lan:1" "3:lan:2" "2:lan:3" "1:lan:4" "5t@eth0" + ;; + +# ar8316 +ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22|ARV8539PW22) + ucidef_add_switch "switch0" \ + "0t@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" + ;; + +# rtl8306g +ARV7519PW) + lan_mac=$(mtd_get_mac_binary board_config 22) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_add_switch "switch0" \ + "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4t@eth0" + ;; + +WBMR) + ucidef_add_switch "switch0" \ + "0t@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" + ;; + +VG3503J) + ucidef_set_interface_lan 'eth0' + ;; + +DGN3500*) + ucidef_add_switch "switch0" \ + "3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t@eth0" + ;; + +GR7000) + ucidef_set_interface_wan "eth0" + ;; + +H201L) + ucidef_add_switch "switch0" \ + "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4t@eth0" + ;; + +#rtl8306g +P2601HNFX) + ucidef_add_switch "switch0" \ + "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "5t@eth0" + ;; + +P2812HNUF*) + lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_add_switch "switch0" \ + "0:lan:1" "1:lan:2" "2:lan:3" "4:lan:4" "5:lan:5" "6t@eth0" + ;; + +TDW8970|TDW8980) + lan_mac=$(mtd_get_mac_binary boardconfig 61696) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_add_switch "switch0" \ + "0:lan:1" "2:lan:2" "4:lan:3" "5:lan:4" "6t@eth0" + ;; + +ARV7519RW22) + lan_mac=$(mtd_get_mac_binary boardconfig 22) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_add_switch "switch0" \ + "0:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" "5:lan:5" "6t@eth0" + ;; + +BTHOMEHUBV2B|BTHOMEHUBV3A) + lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_set_interface_lan 'eth0' + ;; + +BTHOMEHUBV5A) + lan_mac=$(mtd_get_mac_binary caldata 4364) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_add_switch "switch0" \ + "0:lan:1" "1:lan:2" "2:lan:3" "4:lan:4" "6t@eth0" + ;; + +VGV7519) + lan_mac=$(mtd_get_mac_binary board_config 22) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_set_interface_lan 'eth0' + ;; + +VGV7510KW22) + lan_mac=$(mtd_get_mac_binary board_config 22) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_add_switch "switch0" \ + "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6t@eth0" + ;; + +esac + +if [ -z "$(ls /lib/modules/`uname -r`/ltq_atm*)" ]; then + ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload" + ucidef_set_interface_wan "nas0" "pppoe" +fi + +if [ -n "$(grep "system type.*: VR9" /proc/cpuinfo)" ]; then + ucidef_add_vdsl_modem "$annex" "/lib/firmware/vdsl.bin" "av" "ptm" +else + ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin" +fi + +[ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan "$lan_mac" +[ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan "$wan_mac" + +board_config_flush + +exit 0 diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/02_network b/target/linux/lantiq/base-files/etc/uci-defaults/02_network deleted file mode 100644 index b22060c..0000000 --- a/target/linux/lantiq/base-files/etc/uci-defaults/02_network +++ /dev/null @@ -1,211 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2011-2012 OpenWrt.org -# - -[ -e /etc/config/network ] && exit 0 - -set_atm_wan() { - local vpi=$1 - local vci=$2 - local encaps=$3 - local payload=$4 - uci batch <<EOF -set network.atm='atm-bridge' -set network.atm.vpi='$vpi' -set network.atm.vci='$vci' -set network.atm.encaps='$encaps' -set network.atm.payload='$payload' -set network.wan='interface' -set network.wan.ifname='nas0' -set network.wan.proto='pppoe' -set network.wan.username='foo' -set network.wan.password='bar' -set network.wan.ipv6='1' -set network.wan6='interface' -set network.wan6.ifname='@wan' -set network.wan6.proto='dhcpv6' -EOF -} - -set_adsl_modem() { - local annex=$1 - local firmware=$2 - uci batch <<EOF -set network.dsl='adsl' -set network.dsl.annex='$annex' -set network.dsl.firmware='$firmware' -EOF -} - -set_vdsl_modem() { - local annex=$1 - local firmware=$2 - local tone=$3 - local xfer_mode=$4 - uci batch <<EOF -set network.dsl='vdsl' -set network.dsl.annex='$annex' -set network.dsl.firmware='$firmware' -set network.dsl.tone='$tone' -set network.dsl.xfer_mode='$xfer_mode' -EOF -} - -. /lib/functions/uci-defaults.sh -. /lib/functions/lantiq.sh - -touch /etc/config/network - -ucidef_set_interface_loopback -ucidef_set_interface_lan 'eth0' - -vpi=1 -vci=32 -annex="a" -encaps="llc" -payload="bridged" -lan_mac="" -wan_mac="" - -board=$(lantiq_board_name) - -case "$board" in -# adm6996 -ARV4510PW) - lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) - wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "3 2 1 0 5t" - ;; - -ARV4520PW) - ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "3 2 1 0 5t" - ;; - -ACMP252|GIGASX76X) - ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "4 3 2 1 5t" - ;; - -# ar8316 -ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22|ARV8539PW22) - ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5" - ;; - -# rtl8306g -ARV7519PW) - lan_mac=$(mtd_get_mac_binary board_config 22) - wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4t" - ;; - -WBMR) - ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5" - ;; - -VG3503J) - ucidef_set_interface_lan 'eth0' - uci set network.lan.type='none' - ;; - -DGN3500*) - ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "3 2 1 0 5t" - ;; - -GR7000) - ucidef_set_interface_wan "eth0" - uci set network.lan.ifname='' - ;; - -H201L) - ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4t" - ;; - -#rtl8306g -P2601HNFX) - ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t" - ;; - -P2812HNUF*) - lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr) - wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_set_interface_lan 'eth0.1' - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0 1 2 4 5 6t" - ;; - -TDW8970|TDW8980) - lan_mac=$(mtd_get_mac_binary boardconfig 61696) - wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_set_interface_lan 'eth0.1' - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0 2 4 5 6t" - ;; - -ARV7519RW22) - lan_mac=$(mtd_get_mac_binary boardconfig 22) - wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0 2 3 4 5 6t" - ;; - -BTHOMEHUBV2B|BTHOMEHUBV3A) - lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) - wan_mac=$(macaddr_add "$lan_mac" 1) - ;; - -BTHOMEHUBV5A) - lan_mac=$(mtd_get_mac_binary caldata 4364) - wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_set_interface_lan 'eth0.1' - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0 1 2 4 6t" - ;; - -VGV7519) - lan_mac=$(mtd_get_mac_binary board_config 22) - wan_mac=$(macaddr_add "$lan_mac" 1) - ;; - -VGV7510KW22) - lan_mac=$(mtd_get_mac_binary board_config 22) - wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_set_interface_lan 'eth0.1' - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "2 3 4 5 6t" - ;; - -esac - -[ -z "$(ls /lib/modules/`uname -r`/ltq_atm*)" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload" - -if [ -n "$(grep "system type.*: VR9" /proc/cpuinfo)" ]; then - set_vdsl_modem "$annex" "/lib/firmware/vdsl.bin" "av" "ptm" -else - set_adsl_modem "$annex" "/lib/firmware/adsl.bin" -fi - -[ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac -[ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac - -uci commit network - -exit 0 |