diff options
Diffstat (limited to 'target/linux')
20 files changed, 73 insertions, 26 deletions
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index adf32f1..c863b21 100755 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -152,7 +152,8 @@ get_status_led() { status_led="buffalo:green:status" ;; wzr-hp-ag300h | \ - wzr-hp-g300nh2) + wzr-hp-g300nh2 | \ + wzr-600dhp) status_led="buffalo:red:diag" ;; wndr3700) diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix b/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix index 1024150..6a7f521 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix @@ -42,7 +42,8 @@ if [ $phyname -a $ACTION = "add" ]; then . /lib/ar71xx.sh case $(ar71xx_board_name) in - wzr-hp-ag300h) + wzr-hp-ag300h|\ + wzr-600dhp) ar922x_disable_gpio_jtag $phyname ;; esac; diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds index 3924393..3e54d64 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds @@ -212,7 +212,8 @@ wlae-ag300n) ucidef_set_led_netdev "wireless" "WIRELESS" "buffalo:green:wireless" "wlan0" ;; -wzr-hp-ag300h) +wzr-hp-ag300h | \ +wzr-600dhp) ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0" ucidef_set_led_netdev "router" "ROUTER" "buffalo:green:router" "eth1" ucidef_set_led_usbdev "usb" "USB" "buffalo:green:usb" "1-1" diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network index b1f84da..15a1d39 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network @@ -233,7 +233,8 @@ tl-wr841n-v7 |\ whr-g301n |\ whr-hp-g300n |\ whr-hp-gn |\ -wzr-hp-ag300h) +wzr-hp-ag300h |\ +wzr-600dhp) ucidef_set_interfaces_lan_wan "eth0" "eth1" ucidef_add_switch "switch0" "1" "1" ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4" diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration index 718a924..8757b21 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration @@ -75,6 +75,7 @@ whr-hp-g300n|\ whr-hp-gn|\ wzr-hp-ag300h|\ wzr-hp-g450h|\ +wzr-600dhp|\ ew-dorin|\ ew-dorin-router) migrate_switch_name "eth0" "switch0" diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 71bf58e..84751e8 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -468,6 +468,9 @@ ar71xx_board_detect() { *WZR-HP-G300NH2) name="wzr-hp-g300nh2" ;; + *WZR-600DHP) + name="wzr-600dhp" + ;; *WHR-HP-G300N) name="whr-hp-g300n" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index c16d184..d3e14d1 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -125,6 +125,7 @@ platform_check_image() { wzr-hp-g300nh | \ wzr-hp-g450h | \ wzr-hp-ag300h | \ + wzr-600dhp | \ whr-g301n | \ whr-hp-g300n | \ whr-hp-gn | \ diff --git a/target/linux/ar71xx/config-3.7 b/target/linux/ar71xx/config-3.7 index 98f0996..7e07a95 100644 --- a/target/linux/ar71xx/config-3.7 +++ b/target/linux/ar71xx/config-3.7 @@ -92,6 +92,7 @@ CONFIG_ATH79_MACH_WZR_HP_AG300H=y CONFIG_ATH79_MACH_WZR_HP_G300NH=y CONFIG_ATH79_MACH_WZR_HP_G300NH2=y CONFIG_ATH79_MACH_WZR_HP_G450H=y +CONFIG_ATH79_MACH_WZR_600DHP=y CONFIG_ATH79_MACH_ZCN_1523H=y CONFIG_ATH79_NVRAM=y CONFIG_ATH79_PCI_ATH9K_FIXUP=y diff --git a/target/linux/ar71xx/config-3.8 b/target/linux/ar71xx/config-3.8 index 847b9a5..898236e 100644 --- a/target/linux/ar71xx/config-3.8 +++ b/target/linux/ar71xx/config-3.8 @@ -92,6 +92,7 @@ CONFIG_ATH79_MACH_WZR_HP_AG300H=y CONFIG_ATH79_MACH_WZR_HP_G300NH=y CONFIG_ATH79_MACH_WZR_HP_G300NH2=y CONFIG_ATH79_MACH_WZR_HP_G450H=y +CONFIG_ATH79_MACH_WZR_600DHP=y CONFIG_ATH79_MACH_ZCN_1523H=y CONFIG_ATH79_NVRAM=y CONFIG_ATH79_PCI_ATH9K_FIXUP=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c index a7068e1..aa035c8 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c @@ -36,7 +36,6 @@ static struct mtd_partition wzrhpag300h_flash_partitions[] = { .name = "u-boot-env", .offset = 0x0040000, .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, }, { .name = "art", .offset = 0x0050000, @@ -212,3 +211,6 @@ static void __init wzrhpag300h_setup(void) MIPS_MACHINE(ATH79_MACH_WZR_HP_AG300H, "WZR-HP-AG300H", "Buffalo WZR-HP-AG300H", wzrhpag300h_setup); +MIPS_MACHINE(ATH79_MACH_WZR_600DHP, "WZR-600DHP", + "Buffalo WZR-600DHP", wzrhpag300h_setup); + diff --git a/target/linux/ar71xx/generic/profiles/buffalo.mk b/target/linux/ar71xx/generic/profiles/buffalo.mk index 887be26..80e7192 100644 --- a/target/linux/ar71xx/generic/profiles/buffalo.mk +++ b/target/linux/ar71xx/generic/profiles/buffalo.mk @@ -1,5 +1,5 @@ # -# Copyright (C) 2009 OpenWrt.org +# Copyright (C) 2009-2013 OpenWrt.org # # This is free software, licensed under the GNU General Public License v2. # See /LICENSE for more information. @@ -49,6 +49,17 @@ endef $(eval $(call Profile,WZRHPG450H)) +define Profile/WZR600DHP + NAME:=Buffalo WZR-600DHP + PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev +endef + +define Profile/WZR600DHP/Description + Package set optimized for the Buffalo WZR-600DHP +endef + +$(eval $(call Profile,WZR600DHP)) + define Profile/WHRG301N NAME:=Buffalo WHR-G301N PACKAGES:= diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index 1d39e25..a34828c 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -960,6 +960,7 @@ $(eval $(call SingleProfile,WZRHPG30XNH,$(fs_128k),WZRHPG300NH,wzr-hp-g300nh,WZR $(eval $(call SingleProfile,WZRHPG30XNH,$(fs_64k),WZRHPG300NH2,wzr-hp-g300nh2,WZR-HP-G300NH2,ttyS0,115200,WZR-HP-G300NH2)) $(eval $(call SingleProfile,WZRHPG30XNH,$(fs_64k),WZRHPAG300H,wzr-hp-ag300h,WZR-HP-AG300H,ttyS0,115200,WZR-HP-AG300H)) $(eval $(call SingleProfile,WZRHPG30XNH,$(fs_64k),WZRHPG450H,wzr-hp-g450h,WZR-HP-G450H,ttyS0,115200,WZR-HP-AG450H)) +$(eval $(call SingleProfile,WZRHPG30XNH,$(fs_64k),WZR600DHP,wzr-600dhp,WZR-600DHP,ttyS0,115200,WZR-600DHP)) $(eval $(call SingleProfile,Zcomax,$(fs_64k),ZCN1523H28,zcn-1523h-2-8,ZCN-1523H-2,ttyS0,115200,$$(zcn1523h_mtdlayout))) $(eval $(call SingleProfile,Zcomax,$(fs_64k),ZCN1523H516,zcn-1523h-5-16,ZCN-1523H-5,ttyS0,115200,$$(zcn1523h_mtdlayout))) diff --git a/target/linux/ar71xx/patches-3.7/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.7/610-MIPS-ath79-openwrt-machines.patch index 73253bb..bdf8c2b 100644 --- a/target/linux/ar71xx/patches-3.7/610-MIPS-ath79-openwrt-machines.patch +++ b/target/linux/ar71xx/patches-3.7/610-MIPS-ath79-openwrt-machines.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ath79/machtypes.h +++ b/arch/mips/ath79/machtypes.h -@@ -16,22 +16,112 @@ +@@ -16,22 +16,113 @@ enum ath79_mach_type { ATH79_MACH_GENERIC = 0, @@ -108,6 +108,7 @@ + ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */ + ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */ + ATH79_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */ ++ ATH79_MACH_WZR_600DHP, /* Buffalo WZR-600DHP */ + ATH79_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */ + ATH79_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */ }; @@ -216,7 +217,7 @@ config ATH79_MACH_PB44 bool "Atheros PB44 reference board" select SOC_AR71XX -@@ -68,6 +148,488 @@ config ATH79_MACH_PB44 +@@ -68,6 +148,497 @@ config ATH79_MACH_PB44 Say 'Y' here if you want your kernel to support the Atheros PB44 reference board. @@ -293,6 +294,15 @@ + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + ++config ATH79_MACH_WZR_600DHP ++ bool "Buffalo WZR-600DHP board support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ +config ATH79_MACH_WP543 + bool "Compex WP543/WPJ543 board support" + select SOC_AR71XX @@ -705,7 +715,7 @@ config ATH79_MACH_UBNT_XM bool "Ubiquiti Networks XM/UniFi boards" select SOC_AR724X -@@ -83,6 +645,24 @@ config ATH79_MACH_UBNT_XM +@@ -83,6 +654,24 @@ config ATH79_MACH_UBNT_XM Say 'Y' here if you want your kernel to support the Ubiquiti Networks XM (rev 1.0) board. @@ -730,7 +740,7 @@ endmenu config SOC_AR71XX -@@ -118,10 +698,6 @@ config SOC_QCA955X +@@ -118,10 +707,6 @@ config SOC_QCA955X select PCI_AR724X if PCI def_bool n @@ -741,7 +751,7 @@ config ATH79_DEV_AP9X_PCI select ATH79_PCI_ATH9K_FIXUP def_bool n -@@ -132,7 +708,14 @@ config ATH79_DEV_DSA +@@ -132,7 +717,14 @@ config ATH79_DEV_DSA config ATH79_DEV_ETH def_bool n @@ -757,7 +767,7 @@ def_bool n config ATH79_DEV_GPIO_BUTTONS -@@ -164,4 +747,7 @@ config ATH79_PCI_ATH9K_FIXUP +@@ -164,4 +756,7 @@ config ATH79_PCI_ATH9K_FIXUP config ATH79_ROUTERBOOT def_bool n @@ -767,7 +777,7 @@ endif --- a/arch/mips/ath79/Makefile +++ b/arch/mips/ath79/Makefile -@@ -38,9 +38,71 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route +@@ -38,9 +38,72 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route # # Machines # @@ -837,6 +847,7 @@ +obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o +obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o +obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o ++obj-$(CONFIG_ATH79_MACH_WZR_600DHP) += mach-wzr-hp-ag300h.o +obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o + --- a/arch/mips/ath79/prom.c diff --git a/target/linux/ar71xx/patches-3.7/612-MIPS-ath79-add-DIR-825-C1-support.patch b/target/linux/ar71xx/patches-3.7/612-MIPS-ath79-add-DIR-825-C1-support.patch index 5d6f5cb..5722ed1 100644 --- a/target/linux/ar71xx/patches-3.7/612-MIPS-ath79-add-DIR-825-C1-support.patch +++ b/target/linux/ar71xx/patches-3.7/612-MIPS-ath79-add-DIR-825-C1-support.patch @@ -10,7 +10,7 @@ ATH79_MACH_EAP7660D, /* Senao EAP7660D */ --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig -@@ -283,6 +283,17 @@ config ATH79_MACH_DIR_825_B1 +@@ -292,6 +292,17 @@ config ATH79_MACH_DIR_825_B1 select ATH79_DEV_M25P80 select ATH79_DEV_USB diff --git a/target/linux/ar71xx/patches-3.7/613-MIPS-ath79-add-TL-WDR3500-support.patch b/target/linux/ar71xx/patches-3.7/613-MIPS-ath79-add-TL-WDR3500-support.patch index 0a2c3bd..cc60e78 100644 --- a/target/linux/ar71xx/patches-3.7/613-MIPS-ath79-add-TL-WDR3500-support.patch +++ b/target/linux/ar71xx/patches-3.7/613-MIPS-ath79-add-TL-WDR3500-support.patch @@ -10,7 +10,7 @@ ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */ --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig -@@ -514,6 +514,17 @@ config ATH79_MACH_TL_WA901ND_V2 +@@ -523,6 +523,17 @@ config ATH79_MACH_TL_WA901ND_V2 select ATH79_DEV_M25P80 select ATH79_DEV_WMAC diff --git a/target/linux/ar71xx/patches-3.7/615-MIPS-ath79-RB951G-support.patch b/target/linux/ar71xx/patches-3.7/615-MIPS-ath79-RB951G-support.patch index e679717..07bf886 100644 --- a/target/linux/ar71xx/patches-3.7/615-MIPS-ath79-RB951G-support.patch +++ b/target/linux/ar71xx/patches-3.7/615-MIPS-ath79-RB951G-support.patch @@ -10,7 +10,7 @@ ATH79_MACH_RW2458N, /* Redwave RW2458N */ --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig -@@ -360,6 +360,16 @@ config ATH79_MACH_RB750 +@@ -369,6 +369,16 @@ config ATH79_MACH_RB750 select ATH79_ROUTERBOOT select RLE_DECOMPRESS diff --git a/target/linux/ar71xx/patches-3.8/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.8/610-MIPS-ath79-openwrt-machines.patch index 73253bb..bdf8c2b 100644 --- a/target/linux/ar71xx/patches-3.8/610-MIPS-ath79-openwrt-machines.patch +++ b/target/linux/ar71xx/patches-3.8/610-MIPS-ath79-openwrt-machines.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ath79/machtypes.h +++ b/arch/mips/ath79/machtypes.h -@@ -16,22 +16,112 @@ +@@ -16,22 +16,113 @@ enum ath79_mach_type { ATH79_MACH_GENERIC = 0, @@ -108,6 +108,7 @@ + ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */ + ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */ + ATH79_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */ ++ ATH79_MACH_WZR_600DHP, /* Buffalo WZR-600DHP */ + ATH79_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */ + ATH79_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */ }; @@ -216,7 +217,7 @@ config ATH79_MACH_PB44 bool "Atheros PB44 reference board" select SOC_AR71XX -@@ -68,6 +148,488 @@ config ATH79_MACH_PB44 +@@ -68,6 +148,497 @@ config ATH79_MACH_PB44 Say 'Y' here if you want your kernel to support the Atheros PB44 reference board. @@ -293,6 +294,15 @@ + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + ++config ATH79_MACH_WZR_600DHP ++ bool "Buffalo WZR-600DHP board support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ +config ATH79_MACH_WP543 + bool "Compex WP543/WPJ543 board support" + select SOC_AR71XX @@ -705,7 +715,7 @@ config ATH79_MACH_UBNT_XM bool "Ubiquiti Networks XM/UniFi boards" select SOC_AR724X -@@ -83,6 +645,24 @@ config ATH79_MACH_UBNT_XM +@@ -83,6 +654,24 @@ config ATH79_MACH_UBNT_XM Say 'Y' here if you want your kernel to support the Ubiquiti Networks XM (rev 1.0) board. @@ -730,7 +740,7 @@ endmenu config SOC_AR71XX -@@ -118,10 +698,6 @@ config SOC_QCA955X +@@ -118,10 +707,6 @@ config SOC_QCA955X select PCI_AR724X if PCI def_bool n @@ -741,7 +751,7 @@ config ATH79_DEV_AP9X_PCI select ATH79_PCI_ATH9K_FIXUP def_bool n -@@ -132,7 +708,14 @@ config ATH79_DEV_DSA +@@ -132,7 +717,14 @@ config ATH79_DEV_DSA config ATH79_DEV_ETH def_bool n @@ -757,7 +767,7 @@ def_bool n config ATH79_DEV_GPIO_BUTTONS -@@ -164,4 +747,7 @@ config ATH79_PCI_ATH9K_FIXUP +@@ -164,4 +756,7 @@ config ATH79_PCI_ATH9K_FIXUP config ATH79_ROUTERBOOT def_bool n @@ -767,7 +777,7 @@ endif --- a/arch/mips/ath79/Makefile +++ b/arch/mips/ath79/Makefile -@@ -38,9 +38,71 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route +@@ -38,9 +38,72 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route # # Machines # @@ -837,6 +847,7 @@ +obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o +obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o +obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o ++obj-$(CONFIG_ATH79_MACH_WZR_600DHP) += mach-wzr-hp-ag300h.o +obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o + --- a/arch/mips/ath79/prom.c diff --git a/target/linux/ar71xx/patches-3.8/612-MIPS-ath79-add-DIR-825-C1-support.patch b/target/linux/ar71xx/patches-3.8/612-MIPS-ath79-add-DIR-825-C1-support.patch index 5d6f5cb..5722ed1 100644 --- a/target/linux/ar71xx/patches-3.8/612-MIPS-ath79-add-DIR-825-C1-support.patch +++ b/target/linux/ar71xx/patches-3.8/612-MIPS-ath79-add-DIR-825-C1-support.patch @@ -10,7 +10,7 @@ ATH79_MACH_EAP7660D, /* Senao EAP7660D */ --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig -@@ -283,6 +283,17 @@ config ATH79_MACH_DIR_825_B1 +@@ -292,6 +292,17 @@ config ATH79_MACH_DIR_825_B1 select ATH79_DEV_M25P80 select ATH79_DEV_USB diff --git a/target/linux/ar71xx/patches-3.8/613-MIPS-ath79-add-TL-WDR3500-support.patch b/target/linux/ar71xx/patches-3.8/613-MIPS-ath79-add-TL-WDR3500-support.patch index 0a2c3bd..cc60e78 100644 --- a/target/linux/ar71xx/patches-3.8/613-MIPS-ath79-add-TL-WDR3500-support.patch +++ b/target/linux/ar71xx/patches-3.8/613-MIPS-ath79-add-TL-WDR3500-support.patch @@ -10,7 +10,7 @@ ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */ --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig -@@ -514,6 +514,17 @@ config ATH79_MACH_TL_WA901ND_V2 +@@ -523,6 +523,17 @@ config ATH79_MACH_TL_WA901ND_V2 select ATH79_DEV_M25P80 select ATH79_DEV_WMAC diff --git a/target/linux/ar71xx/patches-3.8/615-MIPS-ath79-RB951G-support.patch b/target/linux/ar71xx/patches-3.8/615-MIPS-ath79-RB951G-support.patch index e679717..07bf886 100644 --- a/target/linux/ar71xx/patches-3.8/615-MIPS-ath79-RB951G-support.patch +++ b/target/linux/ar71xx/patches-3.8/615-MIPS-ath79-RB951G-support.patch @@ -10,7 +10,7 @@ ATH79_MACH_RW2458N, /* Redwave RW2458N */ --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig -@@ -360,6 +360,16 @@ config ATH79_MACH_RB750 +@@ -369,6 +369,16 @@ config ATH79_MACH_RB750 select ATH79_ROUTERBOOT select RLE_DECOMPRESS |