diff options
Diffstat (limited to 'target/linux')
61 files changed, 6011 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/3G-6200N.dts b/target/linux/ramips/dts/3G-6200N.dts new file mode 100644 index 0000000..1ea430d --- /dev/null +++ b/target/linux/ramips/dts/3G-6200N.dts @@ -0,0 +1,91 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "3G-6200N", "ralink,rt3050-soc"; + model = "Edimax 3g-6200n"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,128k@0x3e0000(cimage)ro,3648k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "edimax:green:power"; + gpios = <&gpio0 9 1>; + }; + wlan { + label = "edimax:amber:wlan"; + gpios = <&gpio0 14 1>; + }; + 3g { + label = "edimax:blue:3g"; + gpios = <&gpio0 7 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + wps { + label = "wps"; + gpios = <&gpio0 12 1>; + linux,code = <0x211>; + }; + wlanswitch { + label = "wlanswitch"; + gpios = <&gpio0 13 1>; + linux,code = <0x100>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/3G300M.dts b/target/linux/ramips/dts/3G300M.dts new file mode 100644 index 0000000..59f0582 --- /dev/null +++ b/target/linux/ramips/dts/3G300M.dts @@ -0,0 +1,105 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "3G300M", "ralink,rt3052-soc"; + model = "Tenda 3G300M"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii"; + ralink,gpiommux = "jtag"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l3205d"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l3205d"; + spi-max-frequency = <10000000>; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + 3grouter { + label = "tenda:blue:3grouter"; + gpios = <&gpio0 11 1>; + }; + ap { + label = "tenda:blue:ap"; + gpios = <&gpio0 12 1>; + }; + wisprouter { + label = "tenda:blue:wisprouter"; + gpios = <&gpio0 9 1>; + }; + wirelessrouter { + label = "tenda:blue:wirelessrouter"; + gpios = <&gpio0 13 1>; + }; + 3g { + label = "tenda:blue:3g"; + gpios = <&gpio0 7 1>; + }; + wpsreset { + label = "tenda:blue:wpsreset"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + mode { + label = "mode"; + gpios = <&gpio0 10 1>; + linux,code = <0x100>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/AIR3GII.dts b/target/linux/ramips/dts/AIR3GII.dts new file mode 100644 index 0000000..05717b4 --- /dev/null +++ b/target/linux/ramips/dts/AIR3GII.dts @@ -0,0 +1,79 @@ +/dts-v1/; + +/include/ "rt5350.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "AIR3GII", "ralink,rt5350-soc"; + model = "AirLive Air3GII"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "en25q32b"; + reg = <0 0>; + linux,modalias = "m25p80", "en25q32b"; + spi-max-frequency = <10000000>; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + wlan { + label = "airlive:green:wlan"; + gpios = <&gpio0 8 0>; + }; + mobile { + label = "airlive:green:mobile"; + gpios = <&gpio0 9 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + wps { + label = "wps"; + gpios = <&gpio0 7 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/ALL0239-3G.dts b/target/linux/ramips/dts/ALL0239-3G.dts new file mode 100644 index 0000000..cdc1a9f --- /dev/null +++ b/target/linux/ramips/dts/ALL0239-3G.dts @@ -0,0 +1,101 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ALL0239-3G", "ralink,rt3052-soc"; + model = "Allnet ALL0239-3G"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; + ralink,gpiommux = "mdio"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + gpio-leds { + compatible = "gpio-leds"; + usb { + label = "hw550-3g:green:usb"; + gpios = <&gpio0 8 1>; + }; + 3g { + label = "hw550-3g:green:3g"; + gpios = <&gpio0 11 1>; + }; + status { + label = "hw550-3g:green:status"; + gpios = <&gpio0 12 1>; + }; + wps { + label = "hw550-3g:green:wps"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + connect { + label = "connect"; + gpios = <&gpio0 7 1>; + linux,code = <0xda>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/ALL0256N-4M.dts b/target/linux/ramips/dts/ALL0256N-4M.dts new file mode 100644 index 0000000..7357bd1 --- /dev/null +++ b/target/linux/ramips/dts/ALL0256N-4M.dts @@ -0,0 +1,83 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ALL0256N", "ralink,rt3050-soc"; + model = "Allnet ALL0256N"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3872k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l3205d"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l3205d"; + spi-max-frequency = <10000000>; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + rssilow { + label = "all0256n:green:rssilow"; + gpios = <&gpio0 14 1>; + }; + rssimed { + label = "all0256n:green:rssimed"; + gpios = <&gpio0 12 1>; + }; + rssihigh { + label = "all0256n:green:rssihigh"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/ALL0256N-8M.dts b/target/linux/ramips/dts/ALL0256N-8M.dts new file mode 100644 index 0000000..07e1ac0 --- /dev/null +++ b/target/linux/ramips/dts/ALL0256N-8M.dts @@ -0,0 +1,83 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ALL0256N", "ralink,rt3050-soc"; + model = "Allnet ALL0256N"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l3205d"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l3205d"; + spi-max-frequency = <10000000>; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + rssilow { + label = "all0256n:green:rssilow"; + gpios = <&gpio0 14 1>; + }; + rssimed { + label = "all0256n:green:rssimed"; + gpios = <&gpio0 12 1>; + }; + rssihigh { + label = "all0256n:green:rssihigh"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/ALL5002.dts b/target/linux/ramips/dts/ALL5002.dts new file mode 100644 index 0000000..82819ff --- /dev/null +++ b/target/linux/ramips/dts/ALL5002.dts @@ -0,0 +1,95 @@ +/dts-v1/; + +/include/ "rt3352.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ALL5002", "ralink,rt3352-soc"; + model = "Allnet ALL5002/ALL5003"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,32448k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,gpiomux = "i2c"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l25635e"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l25635e"; + spi-max-frequency = <10000000>; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3f>; + }; + + wmac@10180000 { + status = "okay"; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + i2c-gpio { + compatible = "i2c-gpio"; + + gpios = <&gpio0 1 0 &gpio0 2 0>; + i2c-gpio,delay-us = <10>; + + pcf0: iexp@38 { + #gpio-cells = <2>; + compatible = "inxp,pcf8574a"; + reg = <0x38>; + gpio-controller; + }; + + hwmon@4b { + compatible = "national,lm92"; + reg = <0x4b>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + ld1 { + label = "allnet:green:ld1"; + gpios = <&pcf0 0 1>; + }; + ld2 { + label = "allnet:green:ld2"; + gpios = <&pcf0 1 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/ARGUS_ATP52B.dts b/target/linux/ramips/dts/ARGUS_ATP52B.dts new file mode 100644 index 0000000..3fe0e4d --- /dev/null +++ b/target/linux/ramips/dts/ARGUS_ATP52B.dts @@ -0,0 +1,87 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ARGUS_ATP52B", "ralink,rt3052-soc"; + model = "Argus ATP-52B"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "mtdparts=1f000000.cfi:192k(bootloader)ro,64k(config),64k(factory),7808k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + gpio-leds { + compatible = "gpio-leds"; + run { + label = "argus-atp52b:green:run"; + gpios = <&gpio0 9 1>; + }; + net { + label = "argus-atp52b:amber:net"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/BC2.dts b/target/linux/ramips/dts/BC2.dts new file mode 100644 index 0000000..43d9c02 --- /dev/null +++ b/target/linux/ramips/dts/BC2.dts @@ -0,0 +1,79 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "BC2", "ralink,rt3052-soc"; + model = "NexAira BC2"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii"; + ralink,gpiommux = "jtag"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + gpio-leds { + compatible = "gpio-leds"; + usb { + label = "bc2:blue:usb"; + gpios = <&gpio0 20 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 17 1>; + linux,code = <0x198>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/BR-6425.dts b/target/linux/ramips/dts/BR-6425.dts new file mode 100644 index 0000000..5dd9c56 --- /dev/null +++ b/target/linux/ramips/dts/BR-6425.dts @@ -0,0 +1,83 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "BR-6425", "ralink,rt3052-soc"; + model = "Edimax BR-6425"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "edimax:green:power"; + gpios = <&gpio0 9 1>; + }; + wlan { + label = "edimax:orange:wlan"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset_wps { + label = "reset_wps"; + gpios = <&gpio0 12 1>; + linux,code = <0x198>; + }; + rfkill { + label = "RFKILL switch"; + gpios = <&gpio0 13 1>; + linux,code = <0xf7>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/BROADWAY.dts b/target/linux/ramips/dts/BROADWAY.dts new file mode 100644 index 0000000..6964cdd --- /dev/null +++ b/target/linux/ramips/dts/BROADWAY.dts @@ -0,0 +1,82 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "BROADWAY", "ralink,rt3052-soc"; + model = "Hauppauge Broadway"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(bootloader)ro,64k(config)ro,64k(factory)ro,7744k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + gpio-leds { + compatible = "gpio-leds"; + diskmounted { + label = "red:diskmounted"; + gpios = <&gpio0 9 1>; + }; + wps_active { + label = "red:wps_active"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + factory { + label = "Factory Reset button"; + gpios = <&gpio0 13 1>; + linux,code = <0x198>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/CARAMBOLA.dts b/target/linux/ramips/dts/CARAMBOLA.dts new file mode 100644 index 0000000..dc60935 --- /dev/null +++ b/target/linux/ramips/dts/CARAMBOLA.dts @@ -0,0 +1,66 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "CARAMBOLA", "ralink,rt3050-soc"; + model = "8devices Carambola"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "uartlite", "sdram", "rgmii"; + ralink,gpiommux = "i2c", "spi", "jtag", "mdio"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3f>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; + + i2c-gpio { + compatible = "i2c-gpio"; + + gpios = <&gpio0 1 0 &gpio0 2 0>; + i2c-gpio,delay-us = <10>; + }; +}; diff --git a/target/linux/ramips/dts/DAP-1350.dts b/target/linux/ramips/dts/DAP-1350.dts new file mode 100644 index 0000000..9be5e2c --- /dev/null +++ b/target/linux/ramips/dts/DAP-1350.dts @@ -0,0 +1,101 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "DAP-1350", "ralink,rt3052-soc"; + model = "D-Link DAP-1350"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(devdata)ro,192k(devconf)ro,256k(devlang)ro,7488k@0xb0000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "d-link:blue:power"; + gpios = <&gpio0 8 1>; + }; + power2 { + label = "d-link:red:power"; + gpios = <&gpio0 9 1>; + }; + wps { + label = "d-link:blue:wps"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + rt { + label = "rt"; + gpios = <&gpio0 11 1>; + linux,code = <0x100>; + }; + ap { + label = "ap"; + gpios = <&gpio0 7 1>; + linux,code = <0x101>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/DIR-300-B1.dts b/target/linux/ramips/dts/DIR-300-B1.dts new file mode 100644 index 0000000..f94e1f5 --- /dev/null +++ b/target/linux/ramips/dts/DIR-300-B1.dts @@ -0,0 +1,95 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "DIR-300-B1", "ralink,rt3050-soc"; + model = "D-Link DIR-300 B1"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,3776k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "d-link:amber:status"; + gpios = <&gpio0 8 1>; + }; + status2 { + label = "d-link:green:status"; + gpios = <&gpio0 9 1>; + }; + wan { + label = "d-link:amber:wan"; + gpios = <&gpio0 14 1>; + }; + wan2 { + label = "d-link:green:wan"; + gpios = <&gpio0 12 1>; + }; + wps { + label = "d-link:blue:wps"; + gpios = <&gpio0 13 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/DIR-600-B1.dts b/target/linux/ramips/dts/DIR-600-B1.dts new file mode 100644 index 0000000..555433f --- /dev/null +++ b/target/linux/ramips/dts/DIR-600-B1.dts @@ -0,0 +1,94 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "DIR-600-B1", "ralink,rt3050-soc"; + model = "D-Link DIR-600 B1"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,3776k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "d-link:amber:status"; + gpios = <&gpio0 8 1>; + }; + status2 { + label = "d-link:green:status"; + gpios = <&gpio0 9 1>; + }; + wan { + label = "d-link:amber:wan"; + gpios = <&gpio0 14 1>; + }; + wan2 { + label = "d-link:green:wan"; + gpios = <&gpio0 12 1>; + }; + wps { + label = "d-link:blue:wps"; + gpios = <&gpio0 13 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/DIR-600-B2.dts b/target/linux/ramips/dts/DIR-600-B2.dts new file mode 100644 index 0000000..99c3050 --- /dev/null +++ b/target/linux/ramips/dts/DIR-600-B2.dts @@ -0,0 +1,94 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "DIR-600-B2", "ralink,rt3050-soc"; + model = "D-Link DIR-600 B2"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,3776k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "d-link:amber:status"; + gpios = <&gpio0 8 1>; + }; + status2 { + label = "d-link:green:status"; + gpios = <&gpio0 9 1>; + }; + wan { + label = "d-link:amber:wan"; + gpios = <&gpio0 14 1>; + }; + wan2 { + label = "d-link:green:wan"; + gpios = <&gpio0 12 1>; + }; + wps { + label = "d-link:blue:wps"; + gpios = <&gpio0 13 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/DIR-615-D.dts b/target/linux/ramips/dts/DIR-615-D.dts new file mode 100644 index 0000000..946db9c --- /dev/null +++ b/target/linux/ramips/dts/DIR-615-D.dts @@ -0,0 +1,95 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "DIR-615-D", "ralink,rt3050-soc"; + model = "D-Link DIR-615 D"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,3776k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "d-link:amber:status"; + gpios = <&gpio0 8 1>; + }; + status2 { + label = "d-link:green:status"; + gpios = <&gpio0 9 1>; + }; + wan { + label = "d-link:amber:wan"; + gpios = <&gpio0 14 1>; + }; + wan2 { + label = "d-link:green:wan"; + gpios = <&gpio0 12 1>; + }; + wps { + label = "d-link:blue:wps"; + gpios = <&gpio0 13 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/DIR-615-H1.dts b/target/linux/ramips/dts/DIR-615-H1.dts new file mode 100644 index 0000000..aef69e9 --- /dev/null +++ b/target/linux/ramips/dts/DIR-615-H1.dts @@ -0,0 +1,96 @@ +/dts-v1/; + +/include/ "rt3352.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "DIR-615-H1", "ralink,rt3352-soc"; + model = "D-Link DIR-615 H1"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l3205d"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l3205d"; + spi-max-frequency = <10000000>; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "d-link:amber:status"; + gpios = <&gpio0 7 0>; + }; + status2 { + label = "d-link:green:status"; + gpios = <&gpio0 9 0>; + }; + wan { + label = "d-link:amber:wan"; + gpios = <&gpio0 12 1>; + }; + wan2 { + label = "d-link:green:wan"; + gpios = <&gpio0 13 1>; + }; + wps { + label = "d-link:blue:wps"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/DIR-620-A1.dts b/target/linux/ramips/dts/DIR-620-A1.dts new file mode 100644 index 0000000..5e71328 --- /dev/null +++ b/target/linux/ramips/dts/DIR-620-A1.dts @@ -0,0 +1,103 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "DIR-620-A1", "ralink,rt3050-soc"; + model = "D-Link DIR-620 A1"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "d-link:amber:status"; + gpios = <&gpio0 8 1>; + }; + status2 { + label = "d-link:green:status"; + gpios = <&gpio0 9 1>; + }; + wan { + label = "d-link:amber:wan"; + gpios = <&gpio0 14 1>; + }; + wan2 { + label = "d-link:green:wan"; + gpios = <&gpio0 12 1>; + }; + wps { + label = "d-link:blue:wps"; + gpios = <&gpio0 13 0>; + }; + wps2 { + label = "d-link:amber:wps"; + gpios = <&gpio0 11 0>; + }; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/DIR-645.dts b/target/linux/ramips/dts/DIR-645.dts new file mode 100644 index 0000000..0b87630 --- /dev/null +++ b/target/linux/ramips/dts/DIR-645.dts @@ -0,0 +1,144 @@ +/dts-v1/; + +/include/ "rt3883.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "DIR-645", "ralink,rt3883-soc"; + model = "D-Link DIR-645"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x10000000>; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "uartlite", "spi"; + ralink,gpiomux = "i2c", "jtag"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + timer@100 { + status = "okay"; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + gpio1: gpio@638 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l6405d"; + reg = <0 0>; + linux,modalias = "m25p80"; + spi-max-frequency = <25000000>; + partition@0 { + label = "uboot"; + reg = <0x0 0x30000>; + read-only; + }; + partition@30000 { + label = "uboot-env"; + reg = <0x30000 0x4000>; + read-only; + }; + factory: partition@34000 { + label = "factory"; + reg = <0x34000 0x4000>; + read-only; + }; + partition@38000 { + label = "nvram"; + reg = <0x38000 0x8000>; + read-only; + }; + partition@40000 { + label = "devdata"; + reg = <0x40000 0x10000>; + }; + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + + mtd-mac-address = <&factory 0x28>; + ralink,fixed-link = <1000 1 1 1>; + }; + + wmac@10180000 { + status = "okay"; + ralink,5ghz = <0>; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + rtl8366b { + compatible = "rtl8367b"; + gpio-sda = <&gpio0 1 0>; + gpio-sck = <&gpio0 2 0>; + realtek,extif1 = <1 0 1 1 1 1 1 1 2>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio0 9 0>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 14 0>; + linux,code = <0x211>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + inet { + label = "d-link:green:inet"; + gpios = <&gpio0 0 1>; + }; + wps { + label = "d-link:green:wps"; + gpios = <&gpio1 2 0>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usb { + gpio-export,name = "usb"; + gpio-export,output = <1>; + gpios = <&gpio1 6 0>; + }; + }; +}; diff --git a/target/linux/ramips/dts/ESR-9753.dts b/target/linux/ramips/dts/ESR-9753.dts new file mode 100644 index 0000000..19891e4 --- /dev/null +++ b/target/linux/ramips/dts/ESR-9753.dts @@ -0,0 +1,83 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ESR-9753", "ralink,rt3052-soc"; + model = "Senao / EnGenius ESR-9753"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "esr-9753:orange:power"; + gpios = <&gpio0 8 1>; + }; + wps { + label = "esr-9753:orange:wps"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/F5D8235_V2.dts b/target/linux/ramips/dts/F5D8235_V2.dts new file mode 100644 index 0000000..e99b3b6 --- /dev/null +++ b/target/linux/ramips/dts/F5D8235_V2.dts @@ -0,0 +1,106 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "F5D8235_V2", "ralink,rt3052-soc"; + model = "Belkin F5D8235 v2"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:320k(u-boot)ro,7744k(firmware),64k(nvram),64k(factory)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "uartlite", "jtag", "sdram", "rgmii"; + ralink,gpiommux = "i2c", "spi", "mdio"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3f>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; + + rtl8366rb { + compatible = "rtl8367rb"; + gpio-sda = <&gpio0 1 0>; + gpio-sck = <&gpio0 2 0>; + }; + + gpio-leds { + compatible = "gpio-leds"; + internet { + label = "f5d8235v2:blue:internet"; + gpio = <&gpio0 5 1>; + }; + internet2 { + label = "f5d8235v2:amber:internet"; + gpio = <&gpio0 6 1>; + }; + modem { + label = "f5d8235v2:blue:modem"; + gpio = <&gpio0 11 1>; + }; + modem2 { + label = "f5d8235v2:amber:modem"; + gpio = <&gpio0 8 1>; + }; + router { + label = "f5d8235v2:blue:router"; + gpio = <&gpio0 9 1>; + }; + storage { + label = "f5d8235v2:blue:storage"; + gpio = <&gpio0 23 1>; + }; + storage2 { + label = "f5d8235v2:amber:storage"; + gpio = <&gpio0 22 1>; + }; + security { + label = "f5d8235v2:blue:security"; + gpio = <&gpio0 13 1>; + }; + security2 { + label = "f5d8235v2:amber:security"; + gpio = <&gpio0 12 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/FONERA20N.dts b/target/linux/ramips/dts/FONERA20N.dts new file mode 100644 index 0000000..f7039ff --- /dev/null +++ b/target/linux/ramips/dts/FONERA20N.dts @@ -0,0 +1,91 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "FONERA20N", "ralink,rt3052-soc"; + model = "La Fonera 2.0N"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + gpio-leds { + compatible = "gpio-leds"; + wifi { + label = "fonera20n:orange:wifi"; + gpios = <&gpio0 7 1>; + }; + power { + label = "fonera20n:green:power"; + gpios = <&gpio0 9 1>; + }; + usb { + label = "fonera20n:orange:usb"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 12 1>; + linux,code = <0x198>; + }; + switch { + label = "switch"; + gpios = <&gpio0 13 1>; + linux,code = <0x101>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/FREESTATION5.dts b/target/linux/ramips/dts/FREESTATION5.dts new file mode 100644 index 0000000..04170e3 --- /dev/null +++ b/target/linux/ramips/dts/FREESTATION5.dts @@ -0,0 +1,45 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "FREESTATION5", "ralink,rt3052-soc"; + model = "ARC FreeStation5"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)"; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/HW550-3G.dts b/target/linux/ramips/dts/HW550-3G.dts new file mode 100644 index 0000000..9fa37d3 --- /dev/null +++ b/target/linux/ramips/dts/HW550-3G.dts @@ -0,0 +1,101 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "HW550-3G", "ralink,rt3052-soc"; + model = "Aztech HW550-3G"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; + ralink,gpiommux = "mdio"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + gpio-leds { + compatible = "gpio-leds"; + usb { + label = "hw550-3g:green:usb"; + gpios = <&gpio0 8 1>; + }; + 3g { + label = "hw550-3g:green:3g"; + gpios = <&gpio0 11 1>; + }; + status { + label = "hw550-3g:green:status"; + gpios = <&gpio0 12 1>; + }; + wps { + label = "hw550-3g:green:wps"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + connect { + label = "connect"; + gpios = <&gpio0 7 1>; + linux,code = <0xda>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/MOFI3500-3GN.dts b/target/linux/ramips/dts/MOFI3500-3GN.dts new file mode 100644 index 0000000..9463db4 --- /dev/null +++ b/target/linux/ramips/dts/MOFI3500-3GN.dts @@ -0,0 +1,101 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "MOFI3500-3GN", "ralink,rt3052-soc"; + model = "MoFi Network MOFI3500-3GN"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; + ralink,gpiommux = "mdio"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + usb { + label = "mofi3500-3gn:green:usb"; + gpios = <&gpio0 8 1>; + }; + 3g { + label = "mofi3500-3gn:green:3g"; + gpios = <&gpio0 11 1>; + }; + status { + label = "mofi3500-3gn:green:status"; + gpios = <&gpio0 12 1>; + }; + wps { + label = "mofi3500-3gn:green:wps"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + connect { + label = "connect"; + gpios = <&gpio0 7 1>; + linux,code = <0xda>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/MZK-W300NH2.dts b/target/linux/ramips/dts/MZK-W300NH2.dts new file mode 100644 index 0000000..377bea5 --- /dev/null +++ b/target/linux/ramips/dts/MZK-W300NH2.dts @@ -0,0 +1,92 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "MZK-W300NH2", "ralink,rt3052-soc"; + model = "Planex MZK-W300NH2"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,128k@0x3e0000(cimage)ro,3648k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "uartlite", "mdio", "sdram", "rgmii"; + ralink,gpiommux = "i2c", "spi", "jtag"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "mzkw300nh2:green:power"; + gpios = <&gpio0 9 1>; + }; + wlan { + label = "mzkw300nh2:amber:wlan"; + gpios = <&gpio0 14 1>; + }; + wps { + label = "mzkw300nh2:amber:wps"; + gpios = <&gpio0 11 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + wps { + label = "wps"; + gpios = <&gpio0 12 1>; + linux,code = <0x211>; + }; + reset { + label = "reset"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + rt { + label = "rt"; + gpios = <&gpio0 13 1>; + linux,code = <0x100>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/NBG-419N.dts b/target/linux/ramips/dts/NBG-419N.dts new file mode 100644 index 0000000..a0e2c0e --- /dev/null +++ b/target/linux/ramips/dts/NBG-419N.dts @@ -0,0 +1,82 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "NBG-419N", "ralink,rt3052-soc"; + model = "ZyXEL NBG-419N"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "nbg-419n:green:power"; + gpios = <&gpio0 9 1>; + }; + wps { + label = "nbg-419n:green:wps"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/NW718.dts b/target/linux/ramips/dts/NW718.dts new file mode 100644 index 0000000..f58bd0f --- /dev/null +++ b/target/linux/ramips/dts/NW718.dts @@ -0,0 +1,93 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "NW718", "ralink,rt3050-soc"; + model = "Netcore NW718"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=spi0.0:192k(u-boot)ro,128k(config)ro,64k(factory)ro,3712k@0x60000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,gpiommux = "i2c"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l3205d"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l3205d"; + spi-max-frequency = <25000000>; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + cpu { + label = "nw718:amber:cpu"; + gpios = <&gpio0 13 1>; + }; + usb { + label = "nw718:amber:usb"; + gpios = <&gpio0 8 1>; + }; + wps { + label = "nw718:amber:wps"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/OMNI-EMB-HPM.dts b/target/linux/ramips/dts/OMNI-EMB-HPM.dts new file mode 100644 index 0000000..61647d7 --- /dev/null +++ b/target/linux/ramips/dts/OMNI-EMB-HPM.dts @@ -0,0 +1,119 @@ +/dts-v1/; + +/include/ "rt3883.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "OMNI-EMB-HPM", "ralink,rt3883-soc"; + model = "Omnima EMB HPM"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x10000000>; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "uartlite", "spi"; + ralink,gpiomux = "i2c", "jtag"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + timer@100 { + status = "okay"; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l6405d"; + reg = <0 0>; + linux,modalias = "m25p80"; + spi-max-frequency = <25000000>; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + ralink,phy-mask = <0x10>; + phy-mode = "rgmii"; + }; + + wmac@10180000 { + status = "okay"; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio0 14 0>; + linux,code = <0x198>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power { + label = "emb:orange:power"; + gpios = <&gpio0 7 1>; + }; + status { + label = "emb:green:status"; + gpios = <&gpio0 21 1>; + }; + eth { + label = "emb:green:eth"; + gpios = <&gpio0 20 1>; + }; + eth2 { + label = "emb:red:eth"; + gpios = <&gpio0 18 1>; + }; + wifi { + label = "emb:green:wifi"; + gpios = <&gpio0 17 1>; + }; + wifi2 { + label = "emb:red:wifi"; + gpios = <&gpio0 19 1>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + /* gpio 12 and 13 handle the OC input */ + usb0 { + gpio-export,name = "usb0"; + gpio-export,output = <1>; + gpios = <&gpio0 2 0>; + }; + usb1 { + gpio-export,name = "usb1"; + gpio-export,output = <1>; + gpios = <&gpio0 1 0>; + }; + }; +}; diff --git a/target/linux/ramips/dts/OMNI-EMB.dts b/target/linux/ramips/dts/OMNI-EMB.dts new file mode 100644 index 0000000..a4de320 --- /dev/null +++ b/target/linux/ramips/dts/OMNI-EMB.dts @@ -0,0 +1,81 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "OMNI-EMB", "ralink,rt3052-soc"; + model = "Omnima MiniEMBWiFi"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "emb:green:status"; + gpios = <&gpio0 9 1>; + }; + wlan { + label = "emb:green:wlan"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 12 1>; + linux,code = <0x198>; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/PSR-680W.dts b/target/linux/ramips/dts/PSR-680W.dts new file mode 100644 index 0000000..440a847 --- /dev/null +++ b/target/linux/ramips/dts/PSR-680W.dts @@ -0,0 +1,78 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "PSR-680W", "ralink,rt3052-soc"; + model = "Petatel PSR-680W Wireless 3G Router"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "uartlite", "sdram"; + ralink,gpiommux = "spi", "jtag", "mdio", "rgmii"; + ralink,uartmux = "i2s uartf"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + gpio-leds { + compatible = "gpio-leds"; + wan { + label = "psr-680w:red:wan"; + gpios = <&gpio0 19 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/PWH2004.dts b/target/linux/ramips/dts/PWH2004.dts new file mode 100644 index 0000000..113723e --- /dev/null +++ b/target/linux/ramips/dts/PWH2004.dts @@ -0,0 +1,78 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "PWH2004", "ralink,rt3052-soc"; + model = "Prolink PWH2004"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + gpio-leds { + compatible = "gpio-leds"; + wifi { + label = "pwh2004:red:wifi"; + gpios = <&gpio0 14 1>; + }; + power { + label = "pwh2004:green:power"; + gpios = <&gpio0 9 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + wps { + label = "wps"; + gpios = <&gpio0 12 1>; + linux,code = <0x198>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/RT-G32-B1.dts b/target/linux/ramips/dts/RT-G32-B1.dts new file mode 100644 index 0000000..d853953 --- /dev/null +++ b/target/linux/ramips/dts/RT-G32-B1.dts @@ -0,0 +1,72 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "RT-G32-B1", "ralink,rt3050-soc"; + model = "Asus RT-G32 B1"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "mtdparts=spi0.0:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,3776k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l3205d"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l3205d"; + spi-max-frequency = <10000000>; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/RT-N10-PLUS.dts b/target/linux/ramips/dts/RT-N10-PLUS.dts new file mode 100644 index 0000000..92b4075 --- /dev/null +++ b/target/linux/ramips/dts/RT-N10-PLUS.dts @@ -0,0 +1,78 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "RT-N10-PLUS", "ralink,rt3050-soc"; + model = "Asus RT-N10+"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "mtdparts=1f000000.cfi:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,3776k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + gpio-leds { + compatible = "gpio-leds"; + wps { + label = "asus:green:wps"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/RT-N13U.dts b/target/linux/ramips/dts/RT-N13U.dts new file mode 100644 index 0000000..056ac4e --- /dev/null +++ b/target/linux/ramips/dts/RT-N13U.dts @@ -0,0 +1,86 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "RT-N13U", "ralink,rt3052-soc"; + model = "Asus RT-N13U"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "rt-n13u:power"; + gpios = <&gpio0 7 1>; + }; + wifi { + label = "rt-n13u:wifi"; + gpios = <&gpio0 8 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <10>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/RTN56U.dts b/target/linux/ramips/dts/RTN56U.dts new file mode 100644 index 0000000..8d303b8 --- /dev/null +++ b/target/linux/ramips/dts/RTN56U.dts @@ -0,0 +1,140 @@ +/dts-v1/; + +/include/ "rt3883.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "RT-N56U", "ralink,rt3883-soc"; + model = "Asus RT-N56U"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x10000000>; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "uartlite", "spi"; + ralink,gpiomux = "i2c", "jtag"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <0>; + }; + + timer@100 { + status = "okay"; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + gpio1: gpio@638 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l6405d"; + reg = <0 0>; + linux,modalias = "m25p80"; + spi-max-frequency = <25000000>; + partition@0 { + label = "uboot"; + reg = <0x0 0x30000>; + read-only; + }; + partition@30000 { + label = "uboot-env"; + reg = <0x30000 0x4000>; + read-only; + }; + factory: partition@34000 { + label = "factory"; + reg = <0x34000 0x4000>; + read-only; + }; + partition@38000 { + label = "nvram"; + reg = <0x38000 0x8000>; + read-only; + }; + partition@40000 { + label = "devdata"; + reg = <0x40000 0x10000>; + }; + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + + ralink,fixed-link = <1000 1 1 1>; + }; + + wmac@10180000 { + status = "okay"; + ralink,2ghz = <0>; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + rtl8366b { + compatible = "rtl8367b"; + gpio-sda = <&gpio0 1 0>; + gpio-sck = <&gpio0 2 0>; + realtek,extif1 = <1 0 1 1 1 1 1 1 2>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio0 13 0>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio1 2 0>; + linux,code = <0x211>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power { + label = "asus:blue:power"; + gpios = <&gpio0 0 1>; + }; + lan { + label = "asus:blue:lan"; + gpios = <&gpio0 19 1>; + }; + wan { + label = "asus:blue:wan"; + gpios = <&gpio1 3 1>; + }; + usb { + label = "asus:blue:usb"; + gpios = <&gpio1 0 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/SL-R7205.dts b/target/linux/ramips/dts/SL-R7205.dts new file mode 100644 index 0000000..56dbec8 --- /dev/null +++ b/target/linux/ramips/dts/SL-R7205.dts @@ -0,0 +1,82 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "SL-R7205", "ralink,rt3052-soc"; + model = "Skyline SL-R7205 Wireless 3G Router"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + gpio-leds { + compatible = "gpio-leds"; + wifi { + label = "sl-r7205:green:wifi"; + gpios = <&gpio0 7 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/TEW-691GR.dts b/target/linux/ramips/dts/TEW-691GR.dts new file mode 100644 index 0000000..677fa2c --- /dev/null +++ b/target/linux/ramips/dts/TEW-691GR.dts @@ -0,0 +1,89 @@ +/dts-v1/; + +/include/ "rt3883.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "TEW-691GR", "ralink,rt3883-soc"; + model = "TRENDnet TEW-691GR"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x10000000>; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "uartlite", "spi"; + ralink,gpiomux = "i2c", "jtag"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + timer@100 { + status = "okay"; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + gpio1: gpio@638 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l6405d"; + reg = <0 0>; + linux,modalias = "m25p80"; + spi-max-frequency = <25000000>; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + ralink,phy-mask = <0x1>; + phy-mode = "rgmii"; + }; + + wmac@10180000 { + status = "okay"; + ralink,5ghz = <0>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio1 2 1>; + linux,code = <0x211>; + }; + rfkill { + label = "rfkill"; + gpios = <&gpio0 0 1>; + linux,code = <0xf7>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + wps { + label = "trendnet:green:wps"; + gpios = <&gpio0 9 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/TEW-692GR.dts b/target/linux/ramips/dts/TEW-692GR.dts new file mode 100644 index 0000000..1e31202 --- /dev/null +++ b/target/linux/ramips/dts/TEW-692GR.dts @@ -0,0 +1,88 @@ +/dts-v1/; + +/include/ "rt3883.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "TEW-692GR", "ralink,rt3883-soc"; + model = "TRENDnet TEW-692GR"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x10000000>; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "uartlite", "spi"; + ralink,gpiomux = "i2c", "jtag"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + timer@100 { + status = "okay"; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + gpio1: gpio@638 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l6405d"; + reg = <0 0>; + linux,modalias = "m25p80"; + spi-max-frequency = <25000000>; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + ralink,phy-mask = <0x1>; + phy-mode = "rgmii"; + }; + + wmac@10180000 { + status = "okay"; + ralink,5ghz = <0>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio1 2 1>; + linux,code = <0x211>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + wps { + label = "trendnet:orange:wps"; + gpios = <&gpio0 9 1>; + }; + wps2 { + label = "trendnet:green:wps"; + gpios = <&gpio1 4 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/UR-326N4G.dts b/target/linux/ramips/dts/UR-326N4G.dts new file mode 100644 index 0000000..fbcfa15 --- /dev/null +++ b/target/linux/ramips/dts/UR-326N4G.dts @@ -0,0 +1,99 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "UR-326N4G", "ralink,rt3052-soc"; + model = "UR-326N4G Wireless N router"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; + ralink,gpiommux = "mdio"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + 3g { + label = "ur326:green:3g"; + gpios = <&gpio0 9 1>; + }; + gateway { + label = "ur326:green:gateway"; + gpios = <&gpio0 11 1>; + }; + ap { + label = "ur326:green:ap"; + gpios = <&gpio0 12 1>; + }; + wps { + label = "ur326:green:wps"; + gpios = <&gpio0 14 1>; + }; + station { + label = "ur326:green:station"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset_wps { + label = "reset_wps"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + mode { + label = "mode"; + gpios = <&gpio0 7 1>; + linux,code = <0x32>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/UR-336UN.dts b/target/linux/ramips/dts/UR-336UN.dts new file mode 100644 index 0000000..a532b9c --- /dev/null +++ b/target/linux/ramips/dts/UR-336UN.dts @@ -0,0 +1,99 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "UR-336UN", "ralink,rt3052-soc"; + model = "UR-336UN Wireless N router"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; + ralink,gpiommux = "mdio"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + 3g { + label = "ur336:green:3g"; + gpios = <&gpio0 9 1>; + }; + gateway { + label = "ur336:green:gateway"; + gpios = <&gpio0 11 1>; + }; + ap { + label = "ur336:green:ap"; + gpios = <&gpio0 12 1>; + }; + wps { + label = "ur336:green:wps"; + gpios = <&gpio0 14 1>; + }; + station { + label = "ur336:green:station"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset_wps { + label = "reset_wps"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + mode { + label = "mode"; + gpios = <&gpio0 7 1>; + linux,code = <0x32>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/V22RW-2X2.dts b/target/linux/ramips/dts/V22RW-2X2.dts new file mode 100644 index 0000000..2e5e583 --- /dev/null +++ b/target/linux/ramips/dts/V22RW-2X2.dts @@ -0,0 +1,86 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "V22RW-2X2", "ralink,rt3052-soc"; + model = "Ralink AP-RT3052-V22RW-2X2"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + security { + label = "v22rw-2x2:green:security"; + gpios = <&gpio0 13 1>; + }; + wps { + label = "v22rw-2x2:red:wps"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/W306R_V20.dts b/target/linux/ramips/dts/W306R_V20.dts new file mode 100644 index 0000000..0e0749e --- /dev/null +++ b/target/linux/ramips/dts/W306R_V20.dts @@ -0,0 +1,77 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "W306R_V20", "ralink,rt3052-soc"; + model = "Tenda W306R V2.0"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)"; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + gpio-leds { + compatible = "gpio-leds"; + sys { + label = "w306r-v20:green:sys"; + gpios = <&gpio0 9 1>; + }; + wps { + label = "w306r-v20:green:wps"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "RESET/WPS"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/W502U.dts b/target/linux/ramips/dts/W502U.dts new file mode 100644 index 0000000..befea40 --- /dev/null +++ b/target/linux/ramips/dts/W502U.dts @@ -0,0 +1,86 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "W502U", "ralink,rt3052-soc"; + model = "ALFA Networks W502U"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + gpio-leds { + compatible = "gpio-leds"; + usb { + label = "alfa:blue:usb"; + gpios = <&gpio0 13 1>; + }; + wps { + label = "alfa:blue:wps"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/WCR150GN.dts b/target/linux/ramips/dts/WCR150GN.dts new file mode 100644 index 0000000..93c7985 --- /dev/null +++ b/target/linux/ramips/dts/WCR150GN.dts @@ -0,0 +1,86 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "WCR150GN", "ralink,rt3052-soc"; + model = "Sparklan WCR-150GN"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + gpio-leds { + compatible = "gpio-leds"; + user { + label = "wcr150gn:amber:user"; + gpios = <&gpio0 12 1>; + }; + power { + label = "wcr150gn:amber:power"; + gpios = <&gpio0 8 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + wps { + label = "wps"; + gpios = <&gpio0 10 1>; + linux,code = <0x211>; + }; + reset { + label = "reset"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/WHR-G300N.dts b/target/linux/ramips/dts/WHR-G300N.dts new file mode 100644 index 0000000..75f7b5a --- /dev/null +++ b/target/linux/ramips/dts/WHR-G300N.dts @@ -0,0 +1,96 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "WHR-G300N", "ralink,rt3052-soc"; + model = "Buffalo WHR-G300N"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + diag { + label = "whr-g300n:red:diag"; + gpios = <&gpio0 7 1>; + }; + router { + label = "whr-g300n:green:router"; + gpios = <&gpio0 9 1>; + }; + security { + label = "whr-g300n:amber:security"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + aoss { + label = "aoss"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + router-off { + label = "router-off"; + gpios = <&gpio0 11 1>; + linux,code = <0x102>; + }; + router-on { + label = "router-on"; + gpios = <&gpio0 8 1>; + linux,code = <0x103>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/WL-351.dts b/target/linux/ramips/dts/WL-351.dts new file mode 100644 index 0000000..f73a01a --- /dev/null +++ b/target/linux/ramips/dts/WL-351.dts @@ -0,0 +1,107 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "WL-351", "ralink,rt3052-soc"; + model = "Sitecom WL-351 v1 002"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "uartlite", "jtag", "sdram", "rgmii"; + ralink,gpiommux = "i2c", "spi", "mdio"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3f>; + ralink,fct2 = <0x0002500c>; + /* + * ext phy base addr 31, rx/tx clock skew 0, + * turbo mii off, rgmi 3.3v off, port 5 polling off + * port5: enabled, gige, full-duplex, rx/tx-flow-control + * port6: enabled, gige, full-duplex, rx/tx-flow-control + */ + ralink,fpa2 = <0x1f003fff>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "wl-351:amber:power"; + gpio = <&gpio0 8 1>; + }; + unpopulated { + label = "wl-351:amber:unpopulated"; + gpio = <&gpio0 12 1>; + }; + unpopulated2 { + label = "wl-351:blue:unpopulated"; + gpio = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpio = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpio = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + rtl8366rb { + compatible = "rtl8367rb"; + gpio-sda = <&gpio0 1 0>; + gpio-sck = <&gpio0 2 0>; + }; +}; diff --git a/target/linux/ramips/dts/WL341V3.dts b/target/linux/ramips/dts/WL341V3.dts new file mode 100644 index 0000000..ee877e2 --- /dev/null +++ b/target/linux/ramips/dts/WL341V3.dts @@ -0,0 +1,106 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "WL341V3", "ralink,rt3052-soc"; + model = "Sitecom WL-341 v3"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "mtdparts=1f000000.cfi:128k(u-boot)ro,64k(board-nvram)ro,64k(u-boot-env)ro,3776k@0x40000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + gpio-leds { + compatible = "gpio-leds"; + first { + label = "wl341v3:amber:first"; + gpios = <&gpio0 9 1>; + }; + first2 { + label = "wl341v3:blue:first"; + gpios = <&gpio0 13 1>; + }; + third { + label = "wl341v3:amber:third"; + gpios = <&gpio0 11 1>; + }; + third2 { + label = "wl341v3:blue:third"; + gpios = <&gpio0 14 1>; + }; + fourth { + label = "wl341v3:blue:fourth"; + gpios = <&gpio0 10 1>; + }; + fifth { + label = "wl341v3:amber:fifth"; + gpios = <&gpio0 12 1>; + }; + fifth2 { + label = "wl341v3:blue:fifth"; + gpios = <&gpio0 8 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 7 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 5 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/WL_330N.dts b/target/linux/ramips/dts/WL_330N.dts new file mode 100644 index 0000000..370f36b --- /dev/null +++ b/target/linux/ramips/dts/WL_330N.dts @@ -0,0 +1,84 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "WL_330N", "ralink,rt3050-soc"; + model = "Asus WL-330N"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l3205d"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l3205d"; + spi-max-frequency = <10000000>; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + gpio-leds { + compatible = "gpio-leds"; + link { + label = "asus:blue:link"; + gpios = <&gpio0 9 1>; + }; + power { + label = "asus:blue:power"; + gpios = <&gpio0 11 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/WL_330N3G.dts b/target/linux/ramips/dts/WL_330N3G.dts new file mode 100644 index 0000000..2d5b030 --- /dev/null +++ b/target/linux/ramips/dts/WL_330N3G.dts @@ -0,0 +1,92 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "WL_330N3G", "ralink,rt3050-soc"; + model = "Asus WL-330N3G"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l3205d"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l3205d"; + spi-max-frequency = <10000000>; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + gpio-leds { + compatible = "gpio-leds"; + 3g { + label = "asus:blue:3g"; + gpios = <&gpio0 9 1>; + }; + 3g2 { + label = "asus:red:3g"; + gpios = <&gpio0 13 1>; + }; + power { + label = "asus:blue:power"; + gpios = <&gpio0 11 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/WR512-3GN-4M.dts b/target/linux/ramips/dts/WR512-3GN-4M.dts new file mode 100644 index 0000000..8de7cda --- /dev/null +++ b/target/linux/ramips/dts/WR512-3GN-4M.dts @@ -0,0 +1,99 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "WR512-3GN", "ralink,rt3052-soc"; + model = "WR512-3GN-like router"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3872k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; + ralink,gpiommux = "mdio"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + 3g { + label = "wr512:green:3g"; + gpios = <&gpio0 9 1>; + }; + gateway { + label = "wr512:green:gateway"; + gpios = <&gpio0 11 1>; + }; + ap { + label = "wr512:green:ap"; + gpios = <&gpio0 12 1>; + }; + wps { + label = "wr512:green:wps"; + gpios = <&gpio0 14 1>; + }; + station { + label = "wr512:green:station"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset_wps { + label = "reset_wps"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + mode { + label = "mode"; + gpios = <&gpio0 7 1>; + linux,code = <0x32>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/WR512-3GN-8M.dts b/target/linux/ramips/dts/WR512-3GN-8M.dts new file mode 100644 index 0000000..ba2a57f --- /dev/null +++ b/target/linux/ramips/dts/WR512-3GN-8M.dts @@ -0,0 +1,99 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "WR512-3GN", "ralink,rt3052-soc"; + model = "WR512-3GN-like router"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; + ralink,gpiommux = "mdio"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + 3g { + label = "wr512:green:3g"; + gpios = <&gpio0 9 1>; + }; + gateway { + label = "wr512:green:gateway"; + gpios = <&gpio0 11 1>; + }; + ap { + label = "wr512:green:ap"; + gpios = <&gpio0 12 1>; + }; + wps { + label = "wr512:green:wps"; + gpios = <&gpio0 14 1>; + }; + station { + label = "wr512:green:station"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset_wps { + label = "reset_wps"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + mode { + label = "mode"; + gpios = <&gpio0 7 1>; + linux,code = <0x32>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/WR6202.dts b/target/linux/ramips/dts/WR6202.dts new file mode 100644 index 0000000..24c497b --- /dev/null +++ b/target/linux/ramips/dts/WR6202.dts @@ -0,0 +1,98 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "WR6202", "ralink,rt3052-soc"; + model = "AWB WR6202"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + gpio-leds { + compatible = "gpio-leds"; + wps { + label = "wr6202:blue:wps"; + gpios = <&gpio0 14 1>; + }; + 3g { + label = "wr6202:blue:3g"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usb { + gpio-export,name = "usb"; + gpio-export,output = <0>; + gpios = <&gpio0 11 0>; + }; + }; +}; diff --git a/target/linux/ramips/dts/XDXRN502J.dts b/target/linux/ramips/dts/XDXRN502J.dts new file mode 100644 index 0000000..aa6dd95 --- /dev/null +++ b/target/linux/ramips/dts/XDXRN502J.dts @@ -0,0 +1,82 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "XDXRN502J", "ralink,rt3052-soc"; + model = "XDX RN502J"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; + ralink,gpiommux = "mdio"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + gpio-leds { + compatible = "gpio-leds"; + wifi { + label = "xdxrn502j:green:wifi"; + gpios = <&gpio0 7 1>; + }; + power { + label = "xdxrn502j:green:power"; + gpios = <&gpio0 9 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 12 1>; + linux,code = <0x198>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/mt7620.dtsi b/target/linux/ramips/dts/mt7620.dtsi new file mode 100644 index 0000000..c0eb5bc --- /dev/null +++ b/target/linux/ramips/dts/mt7620.dtsi @@ -0,0 +1,136 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ralink,mtk7620n-soc", "ralink,mt7620-soc"; + + cpus { + cpu@0 { + compatible = "mips,mips24KEc"; + }; + }; + + chosen { + bootargs = "console=ttyS0,57600 init=/init"; + }; + + cpuintc: cpuintc@0 { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + palmbus@10000000 { + compatible = "palmbus"; + reg = <0x10000000 0x200000>; + ranges = <0x0 0x10000000 0x1FFFFF>; + + #address-cells = <1>; + #size-cells = <1>; + + sysc@0 { + compatible = "ralink,mt7620-sysc", "ralink,mt7620n-sysc"; + reg = <0x0 0x100>; + }; + + timer@100 { + compatible = "ralink,mt7620-timer", "ralink,rt2880-timer"; + reg = <0x100 0x20>; + + interrupt-parent = <&intc>; + interrupts = <1>; + }; + + watchdog@120 { + compatible = "ralink,mt7620-wdt", "ralink,rt2880-wdt"; + reg = <0x120 0x10>; + }; + + intc: intc@200 { + compatible = "ralink,mt7620-intc", "ralink,rt2880-intc"; + reg = <0x200 0x100>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + memc@300 { + compatible = "ralink,mt7620-memc", "ralink,rt3050-memc"; + reg = <0x300 0x100>; + }; + + gpio0: gpio@600 { + compatible = "ralink,mt7620-gpio", "ralink,rt2880-gpio"; + reg = <0x600 0x34>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,num-gpios = <24>; + ralink,register-map = [ 00 04 08 0c + 20 24 28 2c + 30 34 ]; + }; + + gpio1: gpio@638 { + compatible = "ralink,mt7620-gpio", "ralink,rt2880-gpio"; + reg = <0x638 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,num-gpios = <16>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + }; + + gpio2: gpio@660 { + compatible = "ralink,mt7620-gpio", "ralink,rt2880-gpio"; + reg = <0x660 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,num-gpios = <32>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + }; + + gpio3: gpio@688 { + compatible = "ralink,mt7620-gpio", "ralink,rt2880-gpio"; + reg = <0x688 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,num-gpios = <1>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + }; + + spi@b00 { + compatible = "ralink,rt3883-spi", "ralink,rt2880-spi"; + reg = <0xb00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + uartlite@c00 { + compatible = "ralink,mt7620-uart", "ralink,rt2880-uart", "ns16550a"; + reg = <0xc00 0x100>; + + interrupt-parent = <&intc>; + interrupts = <12>; + + reg-shift = <2>; + }; + }; +}; diff --git a/target/linux/ramips/dts/rt2880.dtsi b/target/linux/ramips/dts/rt2880.dtsi new file mode 100644 index 0000000..2d6a7a9 --- /dev/null +++ b/target/linux/ramips/dts/rt2880.dtsi @@ -0,0 +1,114 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ralink,rt2880-soc"; + + cpus { + cpu@0 { + compatible = "mips,mips24KEc"; + }; + }; + + chosen { + bootargs = "console=ttyS0,57600 init=/init"; + }; + + cpuintc: cpuintc@0 { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + palmbus@10000000 { + compatible = "palmbus"; + reg = <0x10000000 0x200000>; + ranges = <0x0 0x10000000 0x1FFFFF>; + + #address-cells = <1>; + #size-cells = <1>; + + sysc@300000 { + compatible = "ralink,rt2880-sysc"; + reg = <0x300000 0x100>; + }; + + timer@300100 { + compatible = "ralink,rt2880-timer"; + reg = <0x300100 0x20>; + + interrupt-parent = <&intc>; + interrupts = <1>; + }; + + watchdog@300120 { + compatible = "ralink,rt2880-wdt"; + reg = <0x300120 0x10>; + }; + + intc: intc@300200 { + compatible = "ralink,rt2880-intc"; + reg = <0x300200 0x100>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + memc@300300 { + compatible = "ralink,rt2880-memc"; + reg = <0x300300 0x100>; + }; + + gpio0: gpio@300600 { + compatible = "ralink,rt2880-gpio"; + reg = <0x300600 0x34>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,num-gpios = <24>; + ralink,register-map = [ 00 04 08 0c + 20 24 28 2c + 30 34 ]; + }; + + gpio1: gpio@300638 { + compatible = "ralink,rt2880-gpio"; + reg = <0x300638 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,num-gpios = <16>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + }; + + gpio2: gpio@300660 { + compatible = "ralink,rt2880-gpio"; + reg = <0x300660 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,num-gpios = <32>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + }; + + uartlite@300c00 { + compatible = "ralink,rt2880-uart", "ns16550a"; + reg = <0x300c00 0x100>; + + interrupt-parent = <&intc>; + interrupts = <12>; + + reg-shift = <2>; + }; + }; +}; diff --git a/target/linux/ramips/dts/rt3050.dtsi b/target/linux/ramips/dts/rt3050.dtsi new file mode 100644 index 0000000..a6996dc --- /dev/null +++ b/target/linux/ramips/dts/rt3050.dtsi @@ -0,0 +1,172 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ralink,rt3050-soc", "ralink,rt3052-soc", "ralink,rt3350-soc"; + + cpus { + cpu@0 { + compatible = "mips,mips24KEc"; + }; + }; + + chosen { + bootargs = "console=ttyS0,57600 init=/init"; + }; + + cpuintc: cpuintc@0 { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + palmbus@10000000 { + compatible = "palmbus"; + reg = <0x10000000 0x200000>; + ranges = <0x0 0x10000000 0x1FFFFF>; + + #address-cells = <1>; + #size-cells = <1>; + + sysc@0 { + compatible = "ralink,rt3052-sysc", "ralink,rt3050-sysc"; + reg = <0x0 0x100>; + }; + + timer@100 { + compatible = "ralink,rt3052-timer", "ralink,rt2880-timer"; + reg = <0x100 0x20>; + + interrupt-parent = <&intc>; + interrupts = <1>; + }; + + watchdog@120 { + compatible = "ralink,rt3052-wdt", "ralink,rt2880-wdt"; + reg = <0x120 0x10>; + }; + + intc: intc@200 { + compatible = "ralink,rt3052-intc", "ralink,rt2880-intc"; + reg = <0x200 0x100>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + memc@300 { + compatible = "ralink,rt3052-memc", "ralink,rt3050-memc"; + reg = <0x300 0x100>; + }; + + gpio0: gpio@600 { + compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio"; + reg = <0x600 0x34>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,num-gpios = <24>; + ralink,register-map = [ 00 04 08 0c + 20 24 28 2c + 30 34 ]; + + status = "disabled"; + }; + + gpio1: gpio@638 { + compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio"; + reg = <0x638 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,num-gpios = <16>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + + status = "disabled"; + }; + + gpio2: gpio@660 { + compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio"; + reg = <0x660 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,num-gpios = <12>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + + status = "disabled"; + }; + + spi@b00 { + compatible = "ralink,rt3050-spi", "ralink,rt2880-spi"; + reg = <0xb00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + uartlite@c00 { + compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a"; + reg = <0xc00 0x100>; + + interrupt-parent = <&intc>; + interrupts = <12>; + + reg-shift = <2>; + }; + + }; + + ethernet@10100000 { + compatible = "ralink,rt3050-eth"; + reg = <0x10100000 10000>; + + interrupt-parent = <&cpuintc>; + interrupts = <5>; + + status = "disabled"; + }; + + esw@10110000 { + compatible = "ralink,rt3050-esw"; + reg = <0x10110000 8000>; + + interrupt-parent = <&intc>; + interrupts = <17>; + + status = "disabled"; + }; + + wmac@10180000 { + compatible = "ralink,rt3050-wmac", "ralink,rt2880-wmac"; + reg = <0x10180000 40000>; + + interrupt-parent = <&cpuintc>; + interrupts = <6>; + + ralink,eeprom = "soc_wmac.eeprom"; + + status = "disabled"; + }; + + otg@101c0000 { + compatible = "ralink,rt3050-otg"; + reg = <0x101c0000 40000>; + + interrupt-parent = <&intc>; + interrupts = <18>; + + status = "disabled"; + }; +}; diff --git a/target/linux/ramips/dts/rt3352.dtsi b/target/linux/ramips/dts/rt3352.dtsi new file mode 100644 index 0000000..25c1dd3 --- /dev/null +++ b/target/linux/ramips/dts/rt3352.dtsi @@ -0,0 +1,181 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ralink,rt3352-soc"; + + cpus { + cpu@0 { + compatible = "mips,mips24KEc"; + }; + }; + + chosen { + bootargs = "console=ttyS0,57600 init=/init"; + }; + + cpuintc: cpuintc@0 { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + palmbus@10000000 { + compatible = "palmbus"; + reg = <0x10000000 0x200000>; + ranges = <0x0 0x10000000 0x1FFFFF>; + + #address-cells = <1>; + #size-cells = <1>; + + sysc@0 { + compatible = "ralink,rt3352-sysc", "ralink,rt3050-sysc"; + reg = <0x0 0x100>; + }; + + timer@100 { + compatible = "ralink,rt3352-timer", "ralink,rt2880-timer"; + reg = <0x100 0x20>; + + interrupt-parent = <&intc>; + interrupts = <1>; + }; + + watchdog@120 { + compatible = "ralink,rt3352-wdt", "ralink,rt2880-wdt"; + reg = <0x120 0x10>; + }; + + intc: intc@200 { + compatible = "ralink,rt3352-intc", "ralink,rt2880-intc"; + reg = <0x200 0x100>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + memc@300 { + compatible = "ralink,rt3352-memc", "ralink,rt3050-memc"; + reg = <0x300 0x100>; + }; + + gpio0: gpio@600 { + compatible = "ralink,rt3352-gpio", "ralink,rt2880-gpio"; + reg = <0x600 0x34>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,num-gpios = <24>; + ralink,register-map = [ 00 04 08 0c + 20 24 28 2c + 30 34 ]; + + status = "disabled"; + }; + + gpio1: gpio@638 { + compatible = "ralink,rt3352-gpio", "ralink,rt2880-gpio"; + reg = <0x638 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,num-gpios = <16>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + + status = "disabled"; + }; + + gpio2: gpio@660 { + compatible = "ralink,rt3352-gpio", "ralink,rt2880-gpio"; + reg = <0x660 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,num-gpios = <12>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + + status = "disabled"; + }; + + spi@b00 { + compatible = "ralink,rt3352-spi", "ralink,rt2880-spi"; + reg = <0xb00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + + status = "disabled"; + }; + + uartlite@c00 { + compatible = "ralink,rt3352-uart", "ralink,rt2880-uart", "ns16550a"; + reg = <0xc00 0x100>; + + interrupt-parent = <&intc>; + interrupts = <12>; + + reg-shift = <2>; + }; + }; + + ethernet@10100000 { + compatible = "ralink,rt3352-eth", "ralink,rt3050-eth"; + reg = <0x10100000 10000>; + + interrupt-parent = <&cpuintc>; + interrupts = <5>; + + status = "disabled"; + }; + + esw@10110000 { + compatible = "ralink,rt3352-esw", "ralink,rt3050-esw"; + reg = <0x10110000 8000>; + + interrupt-parent = <&intc>; + interrupts = <17>; + + status = "disabled"; + }; + + wmac@10180000 { + compatible = "ralink,rt3352-wmac", "ralink,rt2880-wmac"; + reg = <0x10180000 40000>; + + interrupt-parent = <&cpuintc>; + interrupts = <6>; + + ralink,eeprom = "soc_wmac.eeprom"; + + status = "disabled"; + }; + + ehci@101c0000 { + compatible = "ralink,rt3352-ehci", "ehci-platform"; + reg = <0x101c0000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <18>; + + status = "disabled"; + }; + + ohci@101c1000 { + compatible = "ralink,rt3352-ohci", "ohci-platform"; + reg = <0x101c1000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <18>; + + status = "disabled"; + }; +}; diff --git a/target/linux/ramips/dts/rt3883.dtsi b/target/linux/ramips/dts/rt3883.dtsi new file mode 100644 index 0000000..5a4c485 --- /dev/null +++ b/target/linux/ramips/dts/rt3883.dtsi @@ -0,0 +1,190 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ralink,rt3883-soc"; + + cpus { + cpu@0 { + compatible = "mips,mips74Kc"; + }; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + aliases { + spi0 = &spi0; + }; + + cpuintc: cpuintc@0 { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + palmbus@10000000 { + compatible = "palmbus"; + reg = <0x10000000 0x200000>; + ranges = <0x0 0x10000000 0x1FFFFF>; + + #address-cells = <1>; + #size-cells = <1>; + + sysc@0 { + compatible = "ralink,rt3883-sysc", "ralink,rt3050-sysc"; + reg = <0x0 0x100>; + }; + + timer@100 { + compatible = "ralink,rt3883-timer", "ralink,rt2880-timer"; + reg = <0x100 0x20>; + + interrupt-parent = <&intc>; + interrupts = <1>; + }; + + watchdog@120 { + compatible = "ralink,rt3883-wdt", "ralink,rt2880-wdt"; + reg = <0x120 0x10>; + }; + + intc: intc@200 { + compatible = "ralink,rt3883-intc", "ralink,rt2880-intc"; + reg = <0x200 0x100>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + memc@300 { + compatible = "ralink,rt3883-memc", "ralink,rt3050-memc"; + reg = <0x300 0x100>; + }; + + gpio0: gpio@600 { + compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio"; + reg = <0x600 0x34>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,num-gpios = <24>; + ralink,register-map = [ 00 04 08 0c + 20 24 28 2c + 30 34 ]; + + status = "disabled"; + }; + + gpio1: gpio@638 { + compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio"; + reg = <0x638 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,num-gpios = <16>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + + status = "disabled"; + }; + + gpio2: gpio@660 { + compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio"; + reg = <0x660 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,num-gpios = <32>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + + status = "disabled"; + }; + + gpio3: gpio@688 { + compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio"; + reg = <0x688 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,num-gpios = <24>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + + status = "disabled"; + }; + + spi0: spi@b00 { + compatible = "ralink,rt3883-spi", "ralink,rt2880-spi"; + reg = <0xb00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + uartlite@c00 { + compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a"; + reg = <0xc00 0x100>; + + interrupt-parent = <&intc>; + interrupts = <12>; + + reg-shift = <2>; + }; + }; + + ethernet@10100000 { + compatible = "ralink,rt3883-eth"; + reg = <0x10100000 10000>; + + interrupt-parent = <&cpuintc>; + interrupts = <5>; + + status = "disabled"; + }; + + wmac@10180000 { + compatible = "ralink,rt3883-wmac", "ralink,rt2880-wmac"; + reg = <0x10180000 40000>; + + interrupt-parent = <&cpuintc>; + interrupts = <6>; + + ralink,eeprom = "soc_wmac.eeprom"; + + status = "disabled"; + }; + + ehci@101c0000 { + compatible = "ralink,rt3883-ehci", "ehci-platform"; + reg = <0x101c0000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <18>; + + status = "disabled"; + }; + + ohci@101c1000 { + compatible = "ralink,rt3883-ohci", "ohci-platform"; + reg = <0x101c1000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <18>; + + status = "disabled"; + }; +}; diff --git a/target/linux/ramips/dts/rt5350.dtsi b/target/linux/ramips/dts/rt5350.dtsi new file mode 100644 index 0000000..1103700 --- /dev/null +++ b/target/linux/ramips/dts/rt5350.dtsi @@ -0,0 +1,181 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ralink,rt5350-soc"; + + cpus { + cpu@0 { + compatible = "mips,mips24KEc"; + }; + }; + + chosen { + bootargs = "console=ttyS0,57600 init=/init"; + }; + + cpuintc: cpuintc@0 { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + palmbus@10000000 { + compatible = "palmbus"; + reg = <0x10000000 0x200000>; + ranges = <0x0 0x10000000 0x1FFFFF>; + + #address-cells = <1>; + #size-cells = <1>; + + sysc@0 { + compatible = "ralink,rt5350-sysc", "ralink,rt3050-sysc"; + reg = <0x0 0x100>; + }; + + timer@100 { + compatible = "ralink,rt5350-timer", "ralink,rt2880-timer"; + reg = <0x100 0x20>; + + interrupt-parent = <&intc>; + interrupts = <1>; + }; + + watchdog@120 { + compatible = "ralink,rt5350-wdt", "ralink,rt2880-wdt"; + reg = <0x120 0x10>; + }; + + intc: intc@200 { + compatible = "ralink,rt5350-intc", "ralink,rt2880-intc"; + reg = <0x200 0x100>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + memc@300 { + compatible = "ralink,rt5350-memc", "ralink,rt3050-memc"; + reg = <0x300 0x100>; + }; + + gpio0: gpio@600 { + compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio"; + reg = <0x600 0x34>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,num-gpios = <24>; + ralink,register-map = [ 00 04 08 0c + 20 24 28 2c + 30 34 ]; + + status = "disabled"; + }; + + gpio1: gpio@638 { + compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio"; + reg = <0x638 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,num-gpios = <16>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + + status = "disabled"; + }; + + gpio2: gpio@660 { + compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio"; + reg = <0x660 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,num-gpios = <12>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + + status = "disabled"; + }; + + spi@b00 { + compatible = "ralink,rt5350-spi", "ralink,rt2880-spi"; + reg = <0xb00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + + status = "disabled"; + }; + + uartlite@c00 { + compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a"; + reg = <0xc00 0x100>; + + interrupt-parent = <&intc>; + interrupts = <12>; + + reg-shift = <2>; + }; + }; + + ethernet@10100000 { + compatible = "ralink,rt5350-eth", "ralink,rt3050-eth"; + reg = <0x10100000 10000>; + + interrupt-parent = <&cpuintc>; + interrupts = <5>; + + status = "disabled"; + }; + + esw@10110000 { + compatible = "ralink,rt5350-esw", "ralink,rt3050-esw"; + reg = <0x10110000 8000>; + + interrupt-parent = <&intc>; + interrupts = <17>; + + status = "disabled"; + }; + + wmac@10180000 { + compatible = "ralink,rt5350-wmac", "ralink,rt2880-wmac"; + reg = <0x10180000 40000>; + + interrupt-parent = <&cpuintc>; + interrupts = <6>; + + ralink,eeprom = "soc_wmac.eeprom"; + + status = "disabled"; + }; + + ehci@101c0000 { + compatible = "ralink,rt5350-ehci", "ehci-platform"; + reg = <0x101c0000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <18>; + + status = "disabled"; + }; + + ohci@101c1000 { + compatible = "ralink,rt5350-ohci", "ohci-platform"; + reg = <0x101c1000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <18>; + + status = "disabled"; + }; +}; |