summaryrefslogtreecommitdiff
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/adm8668/Makefile25
-rw-r--r--target/linux/adm8668/base-files.mk3
-rw-r--r--target/linux/adm8668/base-files/etc/config/network16
-rw-r--r--target/linux/adm8668/base-files/etc/diag.sh21
-rw-r--r--target/linux/adm8668/base-files/lib/preinit/03_init_hotplug_failsafe_adm86689
-rw-r--r--target/linux/adm8668/base-files/lib/preinit/05_set_preinit_face_adm86689
-rw-r--r--target/linux/adm8668/base-files/lib/preinit/45_failsafe_adm866811
-rw-r--r--target/linux/adm8668/base-files/lib/upgrade/platform.sh15
-rw-r--r--target/linux/adm8668/base-files/sbin/hotplug.failsafe4
-rw-r--r--target/linux/adm8668/config-2.6.3636
-rw-r--r--target/linux/adm8668/files/arch/mips/adm8668/Makefile5
-rw-r--r--target/linux/adm8668/files/arch/mips/adm8668/Platform6
-rw-r--r--target/linux/adm8668/files/arch/mips/adm8668/irq.c134
-rw-r--r--target/linux/adm8668/files/arch/mips/adm8668/net.h276
-rw-r--r--target/linux/adm8668/files/arch/mips/adm8668/net_core.c617
-rw-r--r--target/linux/adm8668/files/arch/mips/adm8668/net_intr.c446
-rw-r--r--target/linux/adm8668/files/arch/mips/adm8668/pci.c171
-rw-r--r--target/linux/adm8668/files/arch/mips/adm8668/platform.c154
-rw-r--r--target/linux/adm8668/files/arch/mips/adm8668/proc.c114
-rw-r--r--target/linux/adm8668/files/arch/mips/adm8668/prom.c138
-rw-r--r--target/linux/adm8668/files/arch/mips/adm8668/serial.c638
-rw-r--r--target/linux/adm8668/files/arch/mips/adm8668/u-boot.h52
-rw-r--r--target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/adm8668.h416
-rw-r--r--target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/bsp_sup.h84
-rw-r--r--target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/irq.h35
-rw-r--r--target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/prom.h55
-rw-r--r--target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/war.h25
-rw-r--r--target/linux/adm8668/files/drivers/mtd/maps/adm8668.c126
-rw-r--r--target/linux/adm8668/image/Makefile26
-rw-r--r--target/linux/adm8668/image/lzma-loader/Makefile41
-rw-r--r--target/linux/adm8668/image/lzma-loader/src/LzmaDecode.c590
-rw-r--r--target/linux/adm8668/image/lzma-loader/src/LzmaDecode.h131
-rw-r--r--target/linux/adm8668/image/lzma-loader/src/Makefile47
-rw-r--r--target/linux/adm8668/image/lzma-loader/src/decompress.c118
-rw-r--r--target/linux/adm8668/image/lzma-loader/src/include/_exports.h18
-rw-r--r--target/linux/adm8668/image/lzma-loader/src/include/asm/global_data.h60
-rw-r--r--target/linux/adm8668/image/lzma-loader/src/include/asm/u-boot.h42
-rw-r--r--target/linux/adm8668/image/lzma-loader/src/include/common.h48
-rw-r--r--target/linux/adm8668/image/lzma-loader/src/include/exports.h38
-rw-r--r--target/linux/adm8668/image/lzma-loader/src/include/image.h157
-rw-r--r--target/linux/adm8668/image/lzma-loader/src/lzma.lds.in24
-rw-r--r--target/linux/adm8668/image/lzma-loader/src/stubs.c52
-rwxr-xr-xtarget/linux/adm8668/image/my-mkimage26
-rw-r--r--target/linux/adm8668/patches-2.6.36/001-adm8668_arch.patch37
-rw-r--r--target/linux/adm8668/patches-2.6.36/002-adm8668_uart.patch41
-rw-r--r--target/linux/adm8668/patches-2.6.36/003-adm8668_nor_map.patch25
46 files changed, 5162 insertions, 0 deletions
diff --git a/target/linux/adm8668/Makefile b/target/linux/adm8668/Makefile
new file mode 100644
index 0000000..9021e39
--- /dev/null
+++ b/target/linux/adm8668/Makefile
@@ -0,0 +1,25 @@
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+ARCH:=mipsel
+BOARD:=adm8668
+BOARDNAME:=Infineon WildPass ADM8668
+FEATURES:=squashfs
+
+LINUX_VERSION:=2.6.36
+
+include $(INCLUDE_DIR)/target.mk
+DEFAULT_PACKAGES += wpad-mini kmod-rt61-pci
+# kmod-switch kmod-diag nvram
+
+define Target/Description
+ Build firmware images for Infineon WildPass (ADM8668) based routers
+ (e.g. T-Mobile branded Linksys WRTU54G-TM)
+endef
+
+$(eval $(call BuildTarget))
diff --git a/target/linux/adm8668/base-files.mk b/target/linux/adm8668/base-files.mk
new file mode 100644
index 0000000..a096236
--- /dev/null
+++ b/target/linux/adm8668/base-files.mk
@@ -0,0 +1,3 @@
+#define Package/base-files/install-target
+# rm -f $(1)/etc/config/network
+#endef
diff --git a/target/linux/adm8668/base-files/etc/config/network b/target/linux/adm8668/base-files/etc/config/network
new file mode 100644
index 0000000..120db23
--- /dev/null
+++ b/target/linux/adm8668/base-files/etc/config/network
@@ -0,0 +1,16 @@
+config interface loopback
+ option ifname lo
+ option proto static
+ option ipaddr 127.0.0.1
+ option netmask 255.0.0.0
+
+config interface lan
+ option ifname eth0
+ option type bridge
+ option proto static
+ option ipaddr 192.168.1.1
+ option netmask 255.255.255.0
+
+config interface wan
+ option ifname eth1
+ option proto dhcp
diff --git a/target/linux/adm8668/base-files/etc/diag.sh b/target/linux/adm8668/base-files/etc/diag.sh
new file mode 100644
index 0000000..edcc753
--- /dev/null
+++ b/target/linux/adm8668/base-files/etc/diag.sh
@@ -0,0 +1,21 @@
+#!/bin/sh
+# Copyright (C) 2010 OpenWrt.org
+
+set_led() {
+ local state="$1"
+ [ -f "/proc/adm8668/sesled" ] && echo "$state" > "/proc/adm8668/sesled"
+}
+
+set_state() {
+ case "$1" in
+ preinit)
+ set_led 1
+ ;;
+ failsafe)
+ set_led 2
+ ;;
+ done)
+ set_led 0
+ ;;
+ esac
+}
diff --git a/target/linux/adm8668/base-files/lib/preinit/03_init_hotplug_failsafe_adm8668 b/target/linux/adm8668/base-files/lib/preinit/03_init_hotplug_failsafe_adm8668
new file mode 100644
index 0000000..b0f4a4e
--- /dev/null
+++ b/target/linux/adm8668/base-files/lib/preinit/03_init_hotplug_failsafe_adm8668
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+init_hotplug_failsafe() {
+ echo '/sbin/hotplug.failsafe' > /proc/sys/kernel/hotplug
+}
+
+boot_hook_add preinit_main init_hotplug_failsafe
+
+
diff --git a/target/linux/adm8668/base-files/lib/preinit/05_set_preinit_face_adm8668 b/target/linux/adm8668/base-files/lib/preinit/05_set_preinit_face_adm8668
new file mode 100644
index 0000000..ac2a7cb
--- /dev/null
+++ b/target/linux/adm8668/base-files/lib/preinit/05_set_preinit_face_adm8668
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+set_preinit_ifname() {
+ ifname=eth0
+}
+
+boot_hook_add preinit_main set_preinit_ifname
+
+
diff --git a/target/linux/adm8668/base-files/lib/preinit/45_failsafe_adm8668 b/target/linux/adm8668/base-files/lib/preinit/45_failsafe_adm8668
new file mode 100644
index 0000000..c54aaed
--- /dev/null
+++ b/target/linux/adm8668/base-files/lib/preinit/45_failsafe_adm8668
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+failsafe_wait() {
+ FAILSAFE=
+ grep -q 'SES: UP FLIP' /proc/adm8668/buttons && FAILSAFE=true && export FAILSAFE
+ grep -q 'SES: DOWN' /proc/adm8668/buttons && FAILSAFE=true && export FAILSAFE
+ if [ "$FAILSAFE" != "true" ]; then
+ preinit_net_echo "Please press button now to enter failsafe"
+ fs_wait_for_key f 'to enter failsafe mode' $fs_failsafe_wait_timeout && FAILSAFE=true && export FAILSAFE
+ fi
+}
diff --git a/target/linux/adm8668/base-files/lib/upgrade/platform.sh b/target/linux/adm8668/base-files/lib/upgrade/platform.sh
new file mode 100644
index 0000000..583fa2e
--- /dev/null
+++ b/target/linux/adm8668/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,15 @@
+PART_NAME=linux
+platform_check_image() {
+ [ "$ARGC" -gt 1 ] && return 1
+
+ case "$(get_magic_word "$1")" in
+ # u-boot
+ 2705) return 0;;
+ *)
+ echo "Invalid image type. Please use only u-boot files"
+ return 1
+ ;;
+ esac
+}
+
+# use default for platform_do_upgrade()
diff --git a/target/linux/adm8668/base-files/sbin/hotplug.failsafe b/target/linux/adm8668/base-files/sbin/hotplug.failsafe
new file mode 100644
index 0000000..0544339
--- /dev/null
+++ b/target/linux/adm8668/base-files/sbin/hotplug.failsafe
@@ -0,0 +1,4 @@
+#!/bin/sh
+case "$1" in
+ button) kill -USR1 1;;
+esac
diff --git a/target/linux/adm8668/config-2.6.36 b/target/linux/adm8668/config-2.6.36
new file mode 100644
index 0000000..20cfcf7
--- /dev/null
+++ b/target/linux/adm8668/config-2.6.36
@@ -0,0 +1,36 @@
+CONFIG_ADM8668=y
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EEPROM_93CX6=m
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_IRQ_CPU=y
+CONFIG_MIPS=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MTD_ADM8668_NOR=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_SERIAL_ADM8668=y
+CONFIG_SERIAL_ADM8668_CONSOLE=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/adm8668/files/arch/mips/adm8668/Makefile b/target/linux/adm8668/files/arch/mips/adm8668/Makefile
new file mode 100644
index 0000000..0b31b97
--- /dev/null
+++ b/target/linux/adm8668/files/arch/mips/adm8668/Makefile
@@ -0,0 +1,5 @@
+#
+# something witty --neutronscott
+#
+
+obj-y := irq.o pci.o prom.o platform.o serial.o proc.o net_core.o net_intr.o
diff --git a/target/linux/adm8668/files/arch/mips/adm8668/Platform b/target/linux/adm8668/files/arch/mips/adm8668/Platform
new file mode 100644
index 0000000..c70cd27
--- /dev/null
+++ b/target/linux/adm8668/files/arch/mips/adm8668/Platform
@@ -0,0 +1,6 @@
+#
+# Infineon ADM8668 WildPass
+#
+platform-$(CONFIG_ADM8668) += adm8668/
+cflags-$(CONFIG_ADM8668) += -I$(srctree)/arch/mips/include/asm/mach-adm8668
+load-$(CONFIG_ADM8668) += 0xffffffff80002000
diff --git a/target/linux/adm8668/files/arch/mips/adm8668/irq.c b/target/linux/adm8668/files/arch/mips/adm8668/irq.c
new file mode 100644
index 0000000..aac2ff4
--- /dev/null
+++ b/target/linux/adm8668/files/arch/mips/adm8668/irq.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2010 Scott Nicholas <neutronscott@scottn.us>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/pm.h>
+#include <linux/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/irq_cpu.h>
+#include <asm/irq.h>
+#include <adm8668.h>
+
+
+void enable_adm8668_irq(unsigned int irq);
+void disable_adm8668_irq(unsigned int irq);
+void adm8668_irq_cascade(void);
+
+void plat_irq_dispatch(void)
+{
+ unsigned int pending;
+
+ pending = read_c0_cause() & read_c0_status() & ST0_IM;
+
+ /* timer interrupt, that we renumbered */
+ if (pending & STATUSF_IP7)
+ do_IRQ(MIPS_CPU_IRQ_BASE + 7);
+ if (pending & STATUSF_IP2)
+ adm8668_irq_cascade();
+}
+
+/*
+ * System irq dispatch
+ */
+void adm8668_irq_cascade()
+{
+ int i;
+ unsigned long intsrc;
+
+ intsrc = ADM8668_INTC_REG(IRQ_STATUS_REG) & IRQ_MASK;
+ for (i = 0; intsrc; intsrc >>= 1, i++)
+ if (intsrc & 0x1)
+ do_IRQ(i);
+}
+
+/*
+ * irq enable
+ */
+static __inline void _irq_enable(int irql)
+{
+ ADM8668_INTC_REG(IRQ_ENABLE_REG) = (1 << irql);
+}
+
+
+/*
+ * irq disable
+ */
+static __inline void _irq_disable(int irql)
+{
+ ADM8668_INTC_REG(IRQ_DISABLE_REG) = (1 << irql);
+}
+
+
+/*
+ * enable 8668 irq
+ */
+void enable_adm8668_irq(unsigned int irq)
+{
+ if ((irq < 0) || (irq > NR_IRQS))
+ return;
+
+ _irq_enable(irq);
+}
+
+
+/*
+ * disable 8668 irq
+ */
+void disable_adm8668_irq(unsigned int irq)
+{
+ if ((irq < 0) || (irq > NR_IRQS))
+ return;
+
+ _irq_disable(irq);
+}
+
+static inline void ack_adm8668_irq(unsigned int irq_nr)
+{
+ ADM8668_INTC_REG(IRQ_DISABLE_REG) = (1 << irq_nr);
+}
+
+/*
+ * system irq type
+ */
+
+static struct irq_chip adm8668_irq_type = {
+ .name = "adm8668",
+ .ack = ack_adm8668_irq,
+ .mask = disable_adm8668_irq,
+ .unmask = enable_adm8668_irq
+};
+
+/*
+ * irq init
+ */
+void __init init_adm8668_irqs(void)
+{
+ int i;
+
+ for (i = 0; i <= INT_LVL_MAX; i++)
+ set_irq_chip_and_handler(i, &adm8668_irq_type,
+ handle_level_irq);
+
+ /* hw0 is where our interrupts are uh.. interrupted at. */
+ set_c0_status(IE_IRQ0);
+}
+
+/*
+ * system init
+ */
+void __init arch_init_irq(void)
+{
+ mips_cpu_irq_init();
+ init_adm8668_irqs();
+}
diff --git a/target/linux/adm8668/files/arch/mips/adm8668/net.h b/target/linux/adm8668/files/arch/mips/adm8668/net.h
new file mode 100644
index 0000000..2705a35
--- /dev/null
+++ b/target/linux/adm8668/files/arch/mips/adm8668/net.h
@@ -0,0 +1,276 @@
+/*
+ * originally drivers/net/tulip/tulip.h
+ * Copyright 2000,2001 The Linux Kernel Team
+ * Written/copyright 1994-2001 by Donald Becker.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __NET_TULIP_H__
+#define __NET_TULIP_H__
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/mii.h>
+#include <linux/crc32.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <asm/unaligned.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+/* undefine, or define to various debugging levels (>4 == obscene levels) */
+#define TULIP_DEBUG 1
+#define VALID_INTR 0x0001a451
+#define ADM8668_WAN_IRQ 8
+#define ADM8668_LAN_IRQ 7
+#define ADM8668_WAN_MACADDR 0xb00205ac
+#define ADM8668_LAN_MACADDR 0xb0020404
+
+/* Offsets to the Command and Status Registers, "CSRs". All accesses
+ must be longword instructions and quadword aligned. */
+enum tulip_offsets {
+ CSR0 = 0,
+ CSR1 = 0x08,
+ CSR2 = 0x10,
+ CSR3 = 0x18,
+ CSR4 = 0x20,
+ CSR5 = 0x28,
+ CSR6 = 0x30,
+ CSR7 = 0x38,
+ CSR8 = 0x40,
+ CSR9 = 0x48,
+ CSR10 = 0x50,
+ CSR11 = 0x58,
+ CSR12 = 0x60,
+ CSR13 = 0x68,
+ CSR14 = 0x70,
+ CSR15 = 0x78,
+ CSR18 = 0x88,
+ CSR19 = 0x8c,
+ CSR20 = 0x90,
+ CSR27 = 0xAC,
+ CSR28 = 0xB0,
+};
+
+#define RxPollInt (RxIntr|RxNoBuf|RxDied|RxJabber)
+
+/* The bits in the CSR5 status registers, mostly interrupt sources. */
+enum status_bits {
+ TimerInt = 0x800,
+ SystemError = 0x2000,
+ TPLnkFail = 0x1000,
+ TPLnkPass = 0x10,
+ NormalIntr = 0x10000,
+ AbnormalIntr = 0x8000,
+ RxJabber = 0x200,
+ RxDied = 0x100,
+ RxNoBuf = 0x80,
+ RxIntr = 0x40,
+ TxFIFOUnderflow = 0x20,
+ RxErrIntr = 0x10,
+ TxJabber = 0x08,
+ TxNoBuf = 0x04,
+ TxDied = 0x02,
+ TxIntr = 0x01,
+};
+
+/* bit mask for CSR5 TX/RX process state */
+#define CSR5_TS 0x00700000
+#define CSR5_RS 0x000e0000
+
+enum tulip_mode_bits {
+ TxThreshold = (1 << 22),
+ FullDuplex = (1 << 9),
+ TxOn = 0x2000,
+ AcceptBroadcast = 0x0100,
+ AcceptAllMulticast = 0x0080,
+ AcceptAllPhys = 0x0040,
+ AcceptRunt = 0x0008,
+ RxOn = 0x0002,
+ RxTx = (TxOn | RxOn),
+};
+
+/* The Tulip Rx and Tx buffer descriptors. */
+struct tulip_rx_desc {
+ __le32 status;
+ __le32 length;
+ __le32 buffer1;
+ __le32 buffer2;
+};
+
+struct tulip_tx_desc {
+ __le32 status;
+ __le32 length;
+ __le32 buffer1;
+ __le32 buffer2; /* We use only buffer 1. */
+};
+
+enum desc_status_bits {
+ DescOwned = 0x80000000,
+ DescWholePkt = 0x60000000,
+ DescEndPkt = 0x40000000,
+ DescStartPkt = 0x20000000,
+ DescEndRing = 0x02000000,
+ DescUseLink = 0x01000000,
+
+ /*
+ * Error summary flag is logical or of 'CRC Error', 'Collision Seen',
+ * 'Frame Too Long', 'Runt' and 'Descriptor Error' flags generated
+ * within tulip chip.
+ */
+ RxDescErrorSummary = 0x8000,
+ RxDescCRCError = 0x0002,
+ RxDescCollisionSeen = 0x0040,
+
+ /*
+ * 'Frame Too Long' flag is set if packet length including CRC exceeds
+ * 1518. However, a full sized VLAN tagged frame is 1522 bytes
+ * including CRC.
+ *
+ * The tulip chip does not block oversized frames, and if this flag is
+ * set on a receive descriptor it does not indicate the frame has been
+ * truncated. The receive descriptor also includes the actual length.
+ * Therefore we can safety ignore this flag and check the length
+ * ourselves.
+ */
+ RxDescFrameTooLong = 0x0080,
+ RxDescRunt = 0x0800,
+ RxDescDescErr = 0x4000,
+ RxWholePkt = 0x00000300,
+ /*
+ * Top three bits of 14 bit frame length (status bits 27-29) should
+ * never be set as that would make frame over 2047 bytes. The Receive
+ * Watchdog flag (bit 4) may indicate the length is over 2048 and the
+ * length field is invalid.
+ */
+ RxLengthOver2047 = 0x38000010
+};
+
+/* Keep the ring sizes a power of two for efficiency.
+ Making the Tx ring too large decreases the effectiveness of channel
+ bonding and packet priority.
+ There are no ill effects from too-large receive rings. */
+
+#define TX_RING_SIZE 32
+#define RX_RING_SIZE 128
+
+/* The receiver on the DC21143 rev 65 can fail to close the last
+ * receive descriptor in certain circumstances (see errata) when
+ * using MWI. This can only occur if the receive buffer ends on
+ * a cache line boundary, so the "+ 4" below ensures it doesn't.
+ */
+#define PKT_BUF_SZ (1536 + 4) /* Size of each temporary Rx buffer. */
+
+/* Ring-wrap flag in length field, use for last ring entry.
+ 0x01000000 means chain on buffer2 address,
+ 0x02000000 means use the ring start address in CSR2/3.
+ Note: Some work-alike chips do not function correctly in chained mode.
+ The ASIX chip works only in chained mode.
+ Thus we indicates ring mode, but always write the 'next' field for
+ chained mode as well.
+*/
+#define DESC_RING_WRAP 0x02000000
+
+struct ring_info {
+ struct sk_buff *skb;
+ dma_addr_t mapping;
+};
+
+struct tulip_private {
+ struct tulip_rx_desc *rx_ring;
+ struct tulip_tx_desc *tx_ring;
+ dma_addr_t rx_ring_dma;
+ dma_addr_t tx_ring_dma;
+ /* The saved address of a sent-in-place packet/buffer, for skfree(). */
+ struct ring_info tx_buffers[TX_RING_SIZE];
+ /* The addresses of receive-in-place skbuffs. */
+ struct ring_info rx_buffers[RX_RING_SIZE];
+ struct napi_struct napi;
+ struct net_device_stats stats;
+ struct timer_list oom_timer; /* Out of memory timer. */
+ u32 mc_filter[2];
+ spinlock_t lock;
+ unsigned int cur_rx, cur_tx; /* The next free ring entry */
+ unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */
+ unsigned int csr0; /* CSR0 setting. */
+ unsigned int csr6; /* Current CSR6 control settings. */
+ void (*link_change) (struct net_device * dev, int csr5);
+ struct platform_device *pdev;
+ unsigned long nir;
+ void __iomem *base_addr;
+ int pad0; /* Used for 8-byte alignment */
+ struct net_device *dev;
+};
+
+
+/* interrupt.c */
+irqreturn_t tulip_interrupt(int irq, void *dev_instance);
+int tulip_refill_rx(struct net_device *dev);
+int tulip_poll(struct napi_struct *napi, int budget);
+
+/* tulip_core.c */
+extern int tulip_debug;
+void oom_timer(unsigned long data);
+
+static inline void tulip_start_rxtx(struct tulip_private *tp)
+{
+ void __iomem *ioaddr = tp->base_addr;
+ iowrite32(tp->csr6 | RxTx, ioaddr + CSR6);
+ barrier();
+ (void) ioread32(ioaddr + CSR6); /* mmio sync */
+}
+
+static inline void tulip_stop_rxtx(struct tulip_private *tp)
+{
+ void __iomem *ioaddr = tp->base_addr;
+ u32 csr6 = ioread32(ioaddr + CSR6);
+
+ if (csr6 & RxTx) {
+ unsigned i=1300/10;
+ iowrite32(csr6 & ~RxTx, ioaddr + CSR6);
+ barrier();
+ /* wait until in-flight frame completes.
+ * Max time @ 10BT: 1500*8b/10Mbps == 1200us (+ 100us margin)
+ * Typically expect this loop to end in < 50 us on 100BT.
+ */
+ while (--i && (ioread32(ioaddr + CSR5) & (CSR5_TS|CSR5_RS)))
+ udelay(10);
+
+ if (!i)
+ printk(KERN_DEBUG "fixme: tulip_stop_rxtx() failed"
+ " (CSR5 0x%x CSR6 0x%x)\n",
+ ioread32(ioaddr + CSR5),
+ ioread32(ioaddr + CSR6));
+ }
+}
+
+static inline void tulip_restart_rxtx(struct tulip_private *tp)
+{
+ tulip_stop_rxtx(tp);
+ udelay(5);
+ tulip_start_rxtx(tp);
+}
+
+static inline void tulip_tx_timeout_complete(struct tulip_private *tp, void __iomem *ioaddr)
+{
+ /* Stop and restart the chip's Tx processes. */
+ tulip_restart_rxtx(tp);
+ /* Trigger an immediate transmit demand. */
+ iowrite32(0, ioaddr + CSR1);
+
+ tp->stats.tx_errors++;
+}
+
+#endif /* __NET_TULIP_H__ */
diff --git a/target/linux/adm8668/files/arch/mips/adm8668/net_core.c b/target/linux/adm8668/files/arch/mips/adm8668/net_core.c
new file mode 100644
index 0000000..85a5adb
--- /dev/null
+++ b/target/linux/adm8668/files/arch/mips/adm8668/net_core.c
@@ -0,0 +1,617 @@
+/*
+ * originally drivers/net/tulip_core.c
+ * Copyright 2000,2001 The Linux Kernel Team
+ * Written/copyright 1994-2001 by Donald Becker.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#define DRV_NAME "tulip"
+#define DRV_VERSION "1.1.15-NAPI" /* Keep at least for test */
+#define DRV_RELDATE "Feb 27, 2007"
+
+#include "net.h"
+
+static char version[] __devinitdata =
+ "ADM8668net driver version " DRV_VERSION " (" DRV_RELDATE ")\n";
+
+#define MAX_UNITS 2
+
+/*
+ Set the bus performance register.
+ Typical: Set 16 longword cache alignment, no burst limit.
+ Cache alignment bits 15:14 Burst length 13:8
+ 0000 No alignment 0x00000000 unlimited 0800 8 longwords
+ 4000 8 longwords 0100 1 longword 1000 16 longwords
+ 8000 16 longwords 0200 2 longwords 2000 32 longwords
+ C000 32 longwords 0400 4 longwords
+ Warning: many older 486 systems are broken and require setting 0x00A04800
+ 8 longword cache alignment, 8 longword burst.
+ ToDo: Non-Intel setting could be better.
+*/
+
+//static int csr0 = 0x00200000 | 0x4000;
+static int csr0 = 0;
+
+/* Operational parameters that usually are not changed. */
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (4*HZ)
+
+MODULE_AUTHOR("Scott Nicholas <neutronscott@scottn.us>");
+MODULE_DESCRIPTION("ADM8668 new ethernet driver.");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+#ifdef TULIP_DEBUG
+int tulip_debug = TULIP_DEBUG;
+#else
+int tulip_debug = 1;
+#endif
+
+static void tulip_tx_timeout(struct net_device *dev);
+static void tulip_init_ring(struct net_device *dev);
+static void tulip_free_ring(struct net_device *dev);
+static netdev_tx_t tulip_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
+static int tulip_open(struct net_device *dev);
+static int tulip_close(struct net_device *dev);
+static void tulip_up(struct net_device *dev);
+static void tulip_down(struct net_device *dev);
+static struct net_device_stats *tulip_get_stats(struct net_device *dev);
+//static int private_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static void set_rx_mode(struct net_device *dev);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void poll_tulip(struct net_device *dev);
+#endif
+
+static void tulip_up(struct net_device *dev)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->base_addr;
+
+ napi_enable(&tp->napi);
+
+ /* Reset the chip, holding bit 0 set at least 50 PCI cycles. */
+ iowrite32(0x00000001, ioaddr + CSR0);
+
+ /* Deassert reset.
+ Wait the specified 50 PCI cycles after a reset by initializing
+ Tx and Rx queues and the address filter list. */
+ iowrite32(tp->csr0, ioaddr + CSR0);
+
+ if (tulip_debug > 1)
+ printk(KERN_DEBUG "%s: tulip_up(), irq==%d\n",
+ dev->name, dev->irq);
+
+ iowrite32(tp->rx_ring_dma, ioaddr + CSR3);
+ iowrite32(tp->tx_ring_dma, ioaddr + CSR4);
+ tp->cur_rx = tp->cur_tx = 0;
+ tp->dirty_rx = tp->dirty_tx = 0;
+
+ /* set mac address */
+ iowrite32(get_unaligned_le32(dev->dev_addr), ioaddr + 0xA4);
+ iowrite32(get_unaligned_le16(dev->dev_addr + 4), ioaddr + 0xA8);
+ iowrite32(0, ioaddr + CSR27);
+ iowrite32(0, ioaddr + CSR28);
+
+ tp->csr6 = 0;
+
+ /* Enable automatic Tx underrun recovery. */
+ iowrite32(ioread32(ioaddr + CSR18) | 1, ioaddr + CSR18);
+ tp->csr6 = 0x00040000;
+
+ /* Start the chip's Tx to process setup frame. */
+ tulip_stop_rxtx(tp);
+ barrier();
+ udelay(5);
+ iowrite32(tp->csr6 | TxOn, ioaddr + CSR6);
+
+ /* Enable interrupts by setting the interrupt mask. */
+ iowrite32(VALID_INTR, ioaddr + CSR5);
+ iowrite32(VALID_INTR, ioaddr + CSR7);
+ tulip_start_rxtx(tp);
+ iowrite32(0, ioaddr + CSR2); /* Rx poll demand */
+
+ if (tulip_debug > 2) {
+ printk(KERN_DEBUG "%s: Done tulip_up(), CSR0 %08x, CSR5 %08x CSR6 %08x\n",
+ dev->name, ioread32(ioaddr + CSR0),
+ ioread32(ioaddr + CSR5),
+ ioread32(ioaddr + CSR6));
+ }
+
+ init_timer(&tp->oom_timer);
+ tp->oom_timer.data = (unsigned long)dev;
+ tp->oom_timer.function = oom_timer;
+}
+
+static int
+tulip_open(struct net_device *dev)
+{
+ int retval;
+
+ tulip_init_ring (dev);
+
+ retval = request_irq(dev->irq, tulip_interrupt, IRQF_SHARED, dev->name, dev);
+ if (retval)
+ goto free_ring;
+
+ tulip_up (dev);
+
+ netif_start_queue (dev);
+
+ return 0;
+
+free_ring:
+ tulip_free_ring (dev);
+ return retval;
+}
+
+
+static void tulip_tx_timeout(struct net_device *dev)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->base_addr;
+ unsigned long flags;
+
+ spin_lock_irqsave (&tp->lock, flags);
+
+ dev_warn(&dev->dev,
+ "Transmit timed out, status %08x, CSR12 %08x, resetting...\n",
+ ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12));
+
+ tulip_tx_timeout_complete(tp, ioaddr);
+
+ spin_unlock_irqrestore (&tp->lock, flags);
+ dev->trans_start = jiffies; /* prevent tx timeout */
+ netif_wake_queue (dev);
+}
+
+
+/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+static void tulip_init_ring(struct net_device *dev)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ int i;
+
+ tp->nir = 0;
+
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ tp->rx_ring[i].status = 0x00000000;
+ tp->rx_ring[i].length = cpu_to_le32(PKT_BUF_SZ);
+ tp->rx_ring[i].buffer2 = cpu_to_le32(tp->rx_ring_dma + sizeof(struct tulip_rx_desc) * (i + 1));
+ tp->rx_buffers[i].skb = NULL;
+ tp->rx_buffers[i].mapping = 0;
+ }
+ /* Mark the last entry as wrapping the ring. */
+ tp->rx_ring[i-1].length = cpu_to_le32(PKT_BUF_SZ | DESC_RING_WRAP);
+ tp->rx_ring[i-1].buffer2 = cpu_to_le32(tp->rx_ring_dma);
+
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ dma_addr_t mapping;
+ /* Note the receive buffer must be longword aligned.
+ dev_alloc_skb() provides 16 byte alignment. But do *not*
+ use skb_reserve() to align the IP header! */
+ struct sk_buff *skb = dev_alloc_skb(PKT_BUF_SZ);
+ tp->rx_buffers[i].skb = skb;
+ if (skb == NULL)
+ break;
+ mapping = dma_map_single(&dev->dev, skb->data,
+ PKT_BUF_SZ, DMA_FROM_DEVICE);
+ tp->rx_buffers[i].mapping = mapping;
+ skb->dev = dev; /* Mark as being used by this device. */
+ tp->rx_ring[i].status = cpu_to_le32(DescOwned); /* Owned by Tulip chip */
+ tp->rx_ring[i].buffer1 = cpu_to_le32(mapping);
+ }
+ tp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
+
+ /* The Tx buffer descriptor is filled in as needed, but we
+ do need to clear the ownership bit. */
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ tp->tx_buffers[i].skb = NULL;
+ tp->tx_buffers[i].mapping = 0;
+ tp->tx_ring[i].status = 0x00000000;
+ tp->tx_ring[i].buffer2 = cpu_to_le32(tp->tx_ring_dma + sizeof(struct tulip_tx_desc) * (i + 1));
+ }
+ tp->tx_ring[i-1].buffer2 = cpu_to_le32(tp->tx_ring_dma);
+}
+
+static netdev_tx_t
+tulip_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ int entry;
+ u32 flag;
+ dma_addr_t mapping;
+ unsigned long flags;
+
+ spin_lock_irqsave(&tp->lock, flags);
+
+ /* Calculate the next Tx descriptor entry. */
+ entry = tp->cur_tx % TX_RING_SIZE;
+
+ tp->tx_buffers[entry].skb = skb;
+ mapping = dma_map_single(&tp->pdev->dev, skb->data, skb->len,
+ DMA_TO_DEVICE);
+ tp->tx_buffers[entry].mapping = mapping;
+ tp->tx_ring[entry].buffer1 = cpu_to_le32(mapping);
+
+ if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE/2) {/* Typical path */
+ flag = 0x60000000; /* No interrupt */
+ } else if (tp->cur_tx - tp->dirty_tx == TX_RING_SIZE/2) {
+ flag = 0xe0000000; /* Tx-done intr. */
+ } else if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE - 2) {
+ flag = 0x60000000; /* No Tx-done intr. */
+ } else { /* Leave room for set_rx_mode() to fill entries. */
+ flag = 0xe0000000; /* Tx-done intr. */
+ netif_stop_queue(dev);
+ }
+ if (entry == TX_RING_SIZE-1)
+ flag = 0xe0000000 | DESC_RING_WRAP;
+
+ tp->tx_ring[entry].length = cpu_to_le32(skb->len | flag);
+ /* if we were using Transmit Automatic Polling, we would need a
+ * wmb() here. */
+ tp->tx_ring[entry].status = cpu_to_le32(DescOwned);
+ wmb();
+
+ tp->cur_tx++;
+
+ /* Trigger an immediate transmit demand. */
+ iowrite32(0, tp->base_addr + CSR1);
+
+ spin_unlock_irqrestore(&tp->lock, flags);
+
+ return NETDEV_TX_OK;
+}
+
+static void tulip_clean_tx_ring(struct tulip_private *tp)
+{
+ unsigned int dirty_tx;
+
+ for (dirty_tx = tp->dirty_tx ; tp->cur_tx - dirty_tx > 0;
+ dirty_tx++) {
+ int entry = dirty_tx % TX_RING_SIZE;
+ int status = le32_to_cpu(tp->tx_ring[entry].status);
+
+ if (status < 0) {
+ tp->stats.tx_errors++; /* It wasn't Txed */
+ tp->tx_ring[entry].status = 0;
+ }
+
+ dma_unmap_single(&tp->pdev->dev, tp->tx_buffers[entry].mapping,
+ tp->tx_buffers[entry].skb->len,
+ DMA_TO_DEVICE);
+
+ /* Free the original skb. */
+ dev_kfree_skb_irq(tp->tx_buffers[entry].skb);
+ tp->tx_buffers[entry].skb = NULL;
+ tp->tx_buffers[entry].mapping = 0;
+ }
+}
+
+static void tulip_down (struct net_device *dev)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->base_addr;
+ unsigned long flags;
+
+ napi_disable(&tp->napi);
+ del_timer_sync (&tp->oom_timer);
+ spin_lock_irqsave (&tp->lock, flags);
+
+ /* Disable interrupts by clearing the interrupt mask. */
+ iowrite32 (0x00000000, ioaddr + CSR7);
+
+ /* Stop the Tx and Rx processes. */
+ tulip_stop_rxtx(tp);
+
+ /* prepare receive buffers */
+ tulip_refill_rx(dev);
+
+ /* release any unconsumed transmit buffers */
+ tulip_clean_tx_ring(tp);
+
+ if (ioread32 (ioaddr + CSR6) != 0xffffffff)
+ tp->stats.rx_missed_errors += ioread32 (ioaddr + CSR8) & 0xffff;
+
+ spin_unlock_irqrestore (&tp->lock, flags);
+}
+
+static void tulip_free_ring (struct net_device *dev)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ int i;
+
+ /* Free all the skbuffs in the Rx queue. */
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ struct sk_buff *skb = tp->rx_buffers[i].skb;
+ dma_addr_t mapping = tp->rx_buffers[i].mapping;
+
+ tp->rx_buffers[i].skb = NULL;
+ tp->rx_buffers[i].mapping = 0;
+
+ tp->rx_ring[i].status = 0; /* Not owned by Tulip chip. */
+ tp->rx_ring[i].length = 0;
+ /* An invalid address. */
+ tp->rx_ring[i].buffer1 = cpu_to_le32(0xBADF00D0);
+ if (skb) {
+ dma_unmap_single(&tp->pdev->dev, mapping, PKT_BUF_SZ,
+ DMA_FROM_DEVICE);
+ dev_kfree_skb (skb);
+ }
+ }
+
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ struct sk_buff *skb = tp->tx_buffers[i].skb;
+
+ if (skb != NULL) {
+ dma_unmap_single(&tp->pdev->dev,
+ tp->tx_buffers[i].mapping, skb->len, DMA_TO_DEVICE);
+ dev_kfree_skb (skb);
+ }
+ tp->tx_buffers[i].skb = NULL;
+ tp->tx_buffers[i].mapping = 0;
+ }
+}
+
+static int tulip_close (struct net_device *dev)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->base_addr;
+
+ netif_stop_queue (dev);
+
+ tulip_down (dev);
+
+ if (tulip_debug > 1)
+ dev_printk(KERN_DEBUG, &dev->dev,
+ "Shutting down ethercard, status was %02x\n",
+ ioread32 (ioaddr + CSR5));
+
+ free_irq (dev->irq, dev);
+
+ tulip_free_ring (dev);
+
+ return 0;
+}
+
+static struct net_device_stats *tulip_get_stats(struct net_device *dev)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->base_addr;
+
+ if (netif_running(dev)) {
+ unsigned long flags;
+
+ spin_lock_irqsave (&tp->lock, flags);
+
+ tp->stats.rx_missed_errors += ioread32(ioaddr + CSR8) & 0xffff;
+
+ spin_unlock_irqrestore(&tp->lock, flags);
+ }
+
+ return &tp->stats;
+}
+
+
+static void tulip_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->bus_info, "mmio");
+}
+
+static const struct ethtool_ops ops = {
+ .get_drvinfo = tulip_get_drvinfo
+};
+
+static void set_rx_mode(struct net_device *dev)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->base_addr;
+ int csr6;
+
+ csr6 = ioread32(ioaddr + CSR6) & ~0x00D5;
+
+ tp->csr6 &= ~0x00D5;
+ if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
+ tp->csr6 |= AcceptAllMulticast | AcceptAllPhys;
+ csr6 |= AcceptAllMulticast | AcceptAllPhys;
+ } else if ((netdev_mc_count(dev) > 1000) ||
+ (dev->flags & IFF_ALLMULTI)) {
+ /* Too many to filter well -- accept all multicasts. */
+ tp->csr6 |= AcceptAllMulticast;
+ csr6 |= AcceptAllMulticast;
+ } else {
+ /* Some work-alikes have only a 64-entry hash filter table. */
+ /* Should verify correctness on big-endian/__powerpc__ */
+ struct netdev_hw_addr *ha;
+ if (netdev_mc_count(dev) > 64) {
+ /* Arbitrary non-effective limit. */
+ tp->csr6 |= AcceptAllMulticast;
+ csr6 |= AcceptAllMulticast;
+ } else {
+ u32 mc_filter[2] = {0, 0}; /* Multicast hash filter */
+ int filterbit;
+ netdev_for_each_mc_addr(ha, dev) {
+ filterbit = ether_crc_le(ETH_ALEN, ha->addr);
+ filterbit &= 0x3f;
+ mc_filter[filterbit >> 5] |= 1 << (filterbit & 31);
+ if (tulip_debug > 2)
+ dev_info(&dev->dev,
+ "Added filter for %pM %08x bit %d\n",
+ ha->addr,
+ ether_crc(ETH_ALEN, ha->addr),
+ filterbit);
+ }
+ if (mc_filter[0] == tp->mc_filter[0] &&
+ mc_filter[1] == tp->mc_filter[1])
+ ; /* No change. */
+ iowrite32(mc_filter[0], ioaddr + CSR27);
+ iowrite32(mc_filter[1], ioaddr + CSR28);
+ tp->mc_filter[0] = mc_filter[0];
+ tp->mc_filter[1] = mc_filter[1];
+ }
+ }
+
+ if (dev->irq == ADM8668_LAN_IRQ)
+ csr6 |= (1 << 9); /* force 100Mbps full duplex */
+// csr6 |= 1; /* pad 2 bytes. vlan? */
+
+ iowrite32(csr6, ioaddr + CSR6);
+}
+
+static const struct net_device_ops tulip_netdev_ops = {
+ .ndo_open = tulip_open,
+ .ndo_start_xmit = tulip_start_xmit,
+ .ndo_tx_timeout = tulip_tx_timeout,
+ .ndo_stop = tulip_close,
+ .ndo_get_stats = tulip_get_stats,
+ .ndo_set_multicast_list = set_rx_mode,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = poll_tulip,
+#endif
+};
+
+static int __devinit adm8668net_probe(struct platform_device *pdev)
+{
+ struct tulip_private *tp;
+ struct net_device *dev;
+ struct resource *res;
+ void __iomem *ioaddr;
+ int irq;
+
+ if (pdev->id < 0 || pdev->id >= MAX_UNITS)
+ return -EINVAL;
+
+ if (!(res = platform_get_resource(pdev, IORESOURCE_IRQ, 0)))
+ return -ENODEV;
+ irq = res->start;
+ if (!(res = platform_get_resource(pdev, IORESOURCE_MEM, 0)))
+ return -ENODEV;
+ if (!(ioaddr = ioremap(res->start, res->end - res->start)))
+ return -ENODEV;
+ if (!(dev = alloc_etherdev(sizeof (*tp))))
+ return -ENOMEM;
+
+ /* setup net dev */
+ dev->base_addr = (unsigned long)res->start;
+ dev->irq = irq;
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ /* tulip private struct */
+ tp = netdev_priv(dev);
+ tp->dev = dev;
+ tp->base_addr = ioaddr;
+ tp->csr0 = csr0;
+ tp->rx_ring = dma_alloc_coherent(&pdev->dev,
+ sizeof(struct tulip_rx_desc) * RX_RING_SIZE +
+ sizeof(struct tulip_tx_desc) * TX_RING_SIZE,
+ &tp->rx_ring_dma, GFP_KERNEL);
+ if (!tp->rx_ring)
+ return -ENODEV;
+ tp->tx_ring = (struct tulip_tx_desc *)(tp->rx_ring + RX_RING_SIZE);
+ tp->tx_ring_dma = tp->rx_ring_dma + sizeof(struct tulip_rx_desc) * RX_RING_SIZE;
+
+ spin_lock_init(&tp->lock);
+
+ /* Stop the chip's Tx and Rx processes. */
+ tulip_stop_rxtx(tp);
+
+ /* Clear the missed-packet counter. */
+ ioread32(ioaddr + CSR8);
+
+ /* Addresses are stored in BSP area of NOR flash */
+ if (irq == ADM8668_WAN_IRQ)
+ memcpy(dev->dev_addr, (char *)ADM8668_WAN_MACADDR, 6);
+ else
+ memcpy(dev->dev_addr, (char *)ADM8668_LAN_MACADDR, 6);
+
+ /* The Tulip-specific entries in the device structure. */
+ dev->netdev_ops = &tulip_netdev_ops;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ netif_napi_add(dev, &tp->napi, tulip_poll, 16);
+ SET_ETHTOOL_OPS(dev, &ops);
+
+ if (register_netdev(dev))
+ goto err_out_free_ring;
+
+ dev_info(&dev->dev,
+ "ADM8668net at MMIO %#lx %pM, IRQ %d\n",
+ (unsigned long)dev->base_addr, dev->dev_addr, irq);
+
+ platform_set_drvdata(pdev, dev);
+ return 0;
+
+err_out_free_ring:
+ dma_free_coherent(&pdev->dev,
+ sizeof (struct tulip_rx_desc) * RX_RING_SIZE +
+ sizeof (struct tulip_tx_desc) * TX_RING_SIZE,
+ tp->rx_ring, tp->rx_ring_dma);
+ return -ENODEV;
+}
+
+static int __devexit adm8668net_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata (pdev);
+ struct tulip_private *tp;
+
+ if (!dev)
+ return -ENODEV;
+
+ tp = netdev_priv(dev);
+ unregister_netdev(dev);
+ dma_free_coherent(&pdev->dev,
+ sizeof (struct tulip_rx_desc) * RX_RING_SIZE +
+ sizeof (struct tulip_tx_desc) * TX_RING_SIZE,
+ tp->rx_ring, tp->rx_ring_dma);
+ iounmap(tp->base_addr);
+ free_netdev(dev);
+ platform_set_drvdata(pdev, NULL);
+ return 0;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+
+static void poll_tulip (struct net_device *dev)
+{
+ /* disable_irq here is not very nice, but with the lockless
+ interrupt handler we have no other choice. */
+ disable_irq(dev->irq);
+ tulip_interrupt(dev->irq, dev);
+ enable_irq(dev->irq);
+}
+#endif
+
+static struct platform_driver adm8668net_platform_driver = {
+ .probe = adm8668net_probe,
+ .remove = __devexit_p(adm8668net_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "adm8668_eth"
+ },
+};
+
+static int __init adm8668net_init(void)
+{
+ pr_info("%s", version);
+ return platform_driver_register(&adm8668net_platform_driver);
+}
+
+static void __exit adm8668net_exit(void)
+{
+ platform_driver_unregister(&adm8668net_platform_driver);
+}
+
+module_init(adm8668net_init);
+module_exit(adm8668net_exit);
diff --git a/target/linux/adm8668/files/arch/mips/adm8668/net_intr.c b/target/linux/adm8668/files/arch/mips/adm8668/net_intr.c
new file mode 100644
index 0000000..113dbae
--- /dev/null
+++ b/target/linux/adm8668/files/arch/mips/adm8668/net_intr.c
@@ -0,0 +1,446 @@
+/*
+ * originally drivers/net/tulip/interrupt.c
+ * Copyright 2000,2001 The Linux Kernel Team
+ * Written/copyright 1994-2001 by Donald Becker.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include "net.h"
+
+int tulip_refill_rx(struct net_device *dev)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ int entry;
+ int refilled = 0;
+
+ /* Refill the Rx ring buffers. */
+ for (; tp->cur_rx - tp->dirty_rx > 0; tp->dirty_rx++) {
+ entry = tp->dirty_rx % RX_RING_SIZE;
+ if (tp->rx_buffers[entry].skb == NULL) {
+ struct sk_buff *skb;
+ dma_addr_t mapping;
+
+ skb = tp->rx_buffers[entry].skb = dev_alloc_skb(PKT_BUF_SZ);
+ if (skb == NULL)
+ break;
+
+ mapping = dma_map_single(&dev->dev, skb->data,
+ PKT_BUF_SZ, DMA_FROM_DEVICE);
+ tp->rx_buffers[entry].mapping = mapping;
+
+ skb->dev = dev; /* Mark as being used by this device. */
+ tp->rx_ring[entry].buffer1 = cpu_to_le32(mapping);
+ refilled++;
+ }
+ tp->rx_ring[entry].status = cpu_to_le32(DescOwned);
+ }
+ return refilled;
+}
+
+void oom_timer(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *)data;
+ struct tulip_private *tp = netdev_priv(dev);
+ napi_schedule(&tp->napi);
+}
+
+int tulip_poll(struct napi_struct *napi, int budget)
+{
+ struct tulip_private *tp = container_of(napi, struct tulip_private, napi);
+ struct net_device *dev = tp->dev;
+ int entry = tp->cur_rx % RX_RING_SIZE;
+ int work_done = 0;
+
+ if (tulip_debug > 4)
+ printk(KERN_DEBUG " In tulip_rx(), entry %d %08x\n",
+ entry, tp->rx_ring[entry].status);
+
+ do {
+ if (ioread32(tp->base_addr + CSR5) == 0xffffffff) {
+ printk(KERN_DEBUG " In tulip_poll(), hardware disappeared\n");
+ break;
+ }
+ /* Acknowledge current RX interrupt sources. */
+ iowrite32((RxIntr | RxNoBuf), tp->base_addr + CSR5);
+
+
+ /* If we own the next entry, it is a new packet. Send it up. */
+ while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) {
+ s32 status = le32_to_cpu(tp->rx_ring[entry].status);
+ short pkt_len;
+
+ if (tp->dirty_rx + RX_RING_SIZE == tp->cur_rx)
+ break;
+
+ if (tulip_debug > 5)
+ printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %08x\n",
+ dev->name, entry, status);
+
+ if (++work_done >= budget)
+ goto not_done;
+
+ /*
+ * Omit the four octet CRC from the length.
+ * (May not be considered valid until we have
+ * checked status for RxLengthOver2047 bits)
+ */
+ pkt_len = ((status >> 16) & 0x7ff) - 4;
+
+#if 0
+ csr6 = ioread32(tp->base_addr + CSR6);
+ if (csr6 & 0x1)
+ pkt_len += 2;
+
+#endif
+ /*
+ * Maximum pkt_len is 1518 (1514 + vlan header)
+ * Anything higher than this is always invalid
+ * regardless of RxLengthOver2047 bits
+ */
+
+ if ((status & (RxLengthOver2047 |
+ RxDescCRCError |
+ RxDescCollisionSeen |
+ RxDescRunt |
+ RxDescDescErr |
+ RxWholePkt)) != RxWholePkt ||
+ pkt_len > 1518) {
+ if ((status & (RxLengthOver2047 |
+ RxWholePkt)) != RxWholePkt) {
+ /* Ingore earlier buffers. */
+ if ((status & 0xffff) != 0x7fff) {
+ if (tulip_debug > 1)
+ dev_warn(&dev->dev,
+ "Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
+ status);
+ tp->stats.rx_length_errors++;
+ }
+ } else {
+ /* There was a fatal error. */
+ if (tulip_debug > 2)
+ printk(KERN_DEBUG "%s: Receive error, Rx status %08x\n",
+ dev->name, status);
+ tp->stats.rx_errors++; /* end of a packet.*/
+ if (pkt_len > 1518 ||
+ (status & RxDescRunt))
+ tp->stats.rx_length_errors++;
+
+ if (status & 0x0004) tp->stats.rx_frame_errors++;
+ if (status & 0x0002) tp->stats.rx_crc_errors++;
+ if (status & 0x0001) tp->stats.rx_fifo_errors++;
+ }
+ } else {
+ struct sk_buff *skb = tp->rx_buffers[entry].skb;
+ char *temp = skb_put(skb, pkt_len);
+
+#if 0
+ if (csr6 & 1)
+ skb_pull(skb, 2);
+#endif
+#ifndef final_version
+ if (tp->rx_buffers[entry].mapping !=
+ le32_to_cpu(tp->rx_ring[entry].buffer1)) {
+ dev_err(&dev->dev,
+ "Internal fault: The skbuff addresses do not match in tulip_rx: %08x vs. %08llx %p / %p\n",
+ le32_to_cpu(tp->rx_ring[entry].buffer1),
+ (unsigned long long)tp->rx_buffers[entry].mapping,
+ skb->head, temp);
+ }
+#endif
+
+ tp->rx_buffers[entry].skb = NULL;
+ tp->rx_buffers[entry].mapping = 0;
+ skb->protocol = eth_type_trans(skb, dev);
+
+ netif_receive_skb(skb);
+
+ tp->stats.rx_packets++;
+ tp->stats.rx_bytes += pkt_len;
+ }
+ entry = (++tp->cur_rx) % RX_RING_SIZE;
+ if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/4)
+ tulip_refill_rx(dev);
+
+ }
+
+ /* New ack strategy... irq does not ack Rx any longer
+ hopefully this helps */
+
+ /* Really bad things can happen here... If new packet arrives
+ * and an irq arrives (tx or just due to occasionally unset
+ * mask), it will be acked by irq handler, but new thread
+ * is not scheduled. It is major hole in design.
+ * No idea how to fix this if "playing with fire" will fail
+ * tomorrow (night 011029). If it will not fail, we won
+ * finally: amount of IO did not increase at all. */
+ } while ((ioread32(tp->base_addr + CSR5) & RxIntr));
+
+ tulip_refill_rx(dev);
+
+ /* If RX ring is not full we are out of memory. */
+ if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
+ goto oom;
+
+ /* Remove us from polling list and enable RX intr. */
+ napi_complete(napi);
+ iowrite32(VALID_INTR, tp->base_addr+CSR7);
+
+ /* The last op happens after poll completion. Which means the following:
+ * 1. it can race with disabling irqs in irq handler
+ * 2. it can race with dise/enabling irqs in other poll threads
+ * 3. if an irq raised after beginning loop, it will be immediately
+ * triggered here.
+ *
+ * Summarizing: the logic results in some redundant irqs both
+ * due to races in masking and due to too late acking of already
+ * processed irqs. But it must not result in losing events.
+ */
+
+ return work_done;
+
+ not_done:
+ if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/2 ||
+ tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
+ tulip_refill_rx(dev);
+
+ if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
+ goto oom;
+
+ return work_done;
+
+ oom: /* Executed with RX ints disabled */
+
+ /* Start timer, stop polling, but do not enable rx interrupts. */
+ mod_timer(&tp->oom_timer, jiffies+1);
+
+ /* Think: timer_pending() was an explicit signature of bug.
+ * Timer can be pending now but fired and completed
+ * before we did napi_complete(). See? We would lose it. */
+
+ /* remove ourselves from the polling list */
+ napi_complete(napi);
+
+ return work_done;
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+ after the Tx thread. */
+irqreturn_t tulip_interrupt(int irq, void *dev_instance)
+{
+ struct net_device *dev = (struct net_device *)dev_instance;
+ struct tulip_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->base_addr;
+ int csr5;
+ int missed;
+ int rx = 0;
+ int tx = 0;
+ int oi = 0;
+ int maxrx = RX_RING_SIZE;
+ int maxtx = TX_RING_SIZE;
+ int maxoi = TX_RING_SIZE;
+ int rxd = 0;
+ unsigned int work_count = 25;
+ unsigned int handled = 0;
+
+ /* Let's see whether the interrupt really is for us */
+ csr5 = ioread32(ioaddr + CSR5);
+
+ if ((csr5 & (NormalIntr|AbnormalIntr)) == 0)
+ return IRQ_RETVAL(handled);
+
+ tp->nir++;
+
+ do {
+
+ if (!rxd && (csr5 & (RxIntr | RxNoBuf))) {
+ rxd++;
+ /* Mask RX intrs and add the device to poll list. */
+ iowrite32(VALID_INTR&~RxPollInt, ioaddr + CSR7);
+ napi_schedule(&tp->napi);
+
+ if (!(csr5&~(AbnormalIntr|NormalIntr|RxPollInt|TPLnkPass)))
+ break;
+ }
+
+ /* Acknowledge the interrupt sources we handle here ASAP
+ the poll function does Rx and RxNoBuf acking */
+
+ iowrite32(csr5 & 0x0001ff3f, ioaddr + CSR5);
+
+ if (tulip_debug > 4)
+ printk(KERN_DEBUG "%s: interrupt csr5=%#8.8x new csr5=%#8.8x\n",
+ dev->name, csr5, ioread32(ioaddr + CSR5));
+
+
+ if (csr5 & (TxNoBuf | TxDied | TxIntr | TimerInt)) {
+ unsigned int dirty_tx;
+
+ spin_lock(&tp->lock);
+
+ for (dirty_tx = tp->dirty_tx; tp->cur_tx - dirty_tx > 0;
+ dirty_tx++) {
+ int entry = dirty_tx % TX_RING_SIZE;
+ int status = le32_to_cpu(tp->tx_ring[entry].status);
+
+ if (status < 0)
+ break; /* It still has not been Txed */
+
+ if (status & 0x8000) {
+ /* There was an major error, log it. */
+#ifndef final_version
+ if (tulip_debug > 1)
+ printk(KERN_DEBUG "%s: Transmit error, Tx status %08x\n",
+ dev->name, status);
+#endif
+ tp->stats.tx_errors++;
+ if (status & 0x4104) tp->stats.tx_aborted_errors++;
+ if (status & 0x0C00) tp->stats.tx_carrier_errors++;
+ if (status & 0x0200) tp->stats.tx_window_errors++;
+ if (status & 0x0002) tp->stats.tx_fifo_errors++;
+ if (status & 0x0080) tp->stats.tx_heartbeat_errors++;
+ } else {
+ tp->stats.tx_bytes +=
+ tp->tx_buffers[entry].skb->len;
+ tp->stats.collisions += (status >> 3) & 15;
+ tp->stats.tx_packets++;
+ }
+
+ dma_unmap_single(&tp->pdev->dev, tp->tx_buffers[entry].mapping,
+ tp->tx_buffers[entry].skb->len, DMA_TO_DEVICE);
+ /* Free the original skb. */
+ dev_kfree_skb_irq(tp->tx_buffers[entry].skb);
+ tp->tx_buffers[entry].skb = NULL;
+ tp->tx_buffers[entry].mapping = 0;
+ tx++;
+ }
+
+#ifndef final_version
+ if (tp->cur_tx - dirty_tx > TX_RING_SIZE) {
+ dev_err(&dev->dev,
+ "Out-of-sync dirty pointer, %d vs. %d\n",
+ dirty_tx, tp->cur_tx);
+ dirty_tx += TX_RING_SIZE;
+ }
+#endif
+
+ if (tp->cur_tx - dirty_tx < TX_RING_SIZE - 2)
+ netif_wake_queue(dev);
+
+ tp->dirty_tx = dirty_tx;
+ if (csr5 & TxDied) {
+ if (tulip_debug > 2)
+ dev_warn(&dev->dev,
+ "The transmitter stopped. CSR5 is %x, CSR6 %x, new CSR6 %x\n",
+ csr5, ioread32(ioaddr + CSR6),
+ tp->csr6);
+ tulip_restart_rxtx(tp);
+ }
+ spin_unlock(&tp->lock);
+ }
+
+ /* Log errors. */
+ if (csr5 & AbnormalIntr) { /* Abnormal error summary bit. */
+ if (csr5 == 0xffffffff)
+ break;
+ if (csr5 & TxJabber) tp->stats.tx_errors++;
+ if (csr5 & TxFIFOUnderflow) {
+ if ((tp->csr6 & 0xC000) != 0xC000)
+ tp->csr6 += 0x4000; /* Bump up the Tx threshold */
+ else
+ tp->csr6 |= 0x00200000; /* Store-n-forward. */
+ /* Restart the transmit process. */
+ tulip_restart_rxtx(tp);
+ iowrite32(0, ioaddr + CSR1);
+ }
+ if (csr5 & (RxDied | RxNoBuf)) {
+ iowrite32(tp->mc_filter[0], ioaddr + CSR27);
+ iowrite32(tp->mc_filter[1], ioaddr + CSR28);
+ }
+ if (csr5 & RxDied) { /* Missed a Rx frame. */
+ tp->stats.rx_missed_errors += ioread32(ioaddr + CSR8) & 0xffff;
+ tp->stats.rx_errors++;
+ tulip_start_rxtx(tp);
+ }
+ /*
+ * NB: t21142_lnk_change() does a del_timer_sync(), so be careful if this
+ * call is ever done under the spinlock
+ */
+ if (csr5 & (TPLnkPass | TPLnkFail | 0x08000000)) {
+ if (tp->link_change)
+ (tp->link_change)(dev, csr5);
+ }
+ if (csr5 & SystemError) {
+ int error = (csr5 >> 23) & 7;
+ /* oops, we hit a PCI error. The code produced corresponds
+ * to the reason:
+ * 0 - parity error
+ * 1 - master abort
+ * 2 - target abort
+ * Note that on parity error, we should do a software reset
+ * of the chip to get it back into a sane state (according
+ * to the 21142/3 docs that is).
+ * -- rmk
+ */
+ dev_err(&dev->dev,
+ "(%lu) System Error occurred (%d)\n",
+ tp->nir, error);
+ }
+ /* Clear all error sources, included undocumented ones! */
+ iowrite32(0x0800f7ba, ioaddr + CSR5);
+ oi++;
+ }
+ if (csr5 & TimerInt) {
+
+ if (tulip_debug > 2)
+ dev_err(&dev->dev,
+ "Re-enabling interrupts, %08x\n",
+ csr5);
+ iowrite32(VALID_INTR, ioaddr + CSR7);
+ oi++;
+ }
+ if (tx > maxtx || rx > maxrx || oi > maxoi) {
+ if (tulip_debug > 1)
+ dev_warn(&dev->dev, "Too much work during an interrupt, csr5=0x%08x. (%lu) (%d,%d,%d)\n",
+ csr5, tp->nir, tx, rx, oi);
+
+ /* Acknowledge all interrupt sources. */
+ iowrite32(0x8001ffff, ioaddr + CSR5);
+ /* Mask all interrupting sources, set timer to
+ re-enable. */
+ iowrite32(((~csr5) & 0x0001ebef) | AbnormalIntr | TimerInt, ioaddr + CSR7);
+ iowrite32(0x0012, ioaddr + CSR11);
+ break;
+ }
+
+ work_count--;
+ if (work_count == 0)
+ break;
+
+ csr5 = ioread32(ioaddr + CSR5);
+
+ if (rxd)
+ csr5 &= ~RxPollInt;
+ } while ((csr5 & (TxNoBuf |
+ TxDied |
+ TxIntr |
+ TimerInt |
+ /* Abnormal intr. */
+ RxDied |
+ TxFIFOUnderflow |
+ TxJabber |
+ TPLnkFail |
+ SystemError )) != 0);
+
+ if ((missed = ioread32(ioaddr + CSR8) & 0x1ffff)) {
+ tp->stats.rx_dropped += missed & 0x10000 ? 0x10000 : missed;
+ }
+
+ if (tulip_debug > 4)
+ printk(KERN_DEBUG "%s: exiting interrupt, csr5=%#04x\n",
+ dev->name, ioread32(ioaddr + CSR5));
+
+ return IRQ_HANDLED;
+}
diff --git a/target/linux/adm8668/files/arch/mips/adm8668/pci.c b/target/linux/adm8668/files/arch/mips/adm8668/pci.c
new file mode 100644
index 0000000..2bf1192
--- /dev/null
+++ b/target/linux/adm8668/files/arch/mips/adm8668/pci.c
@@ -0,0 +1,171 @@
+/*
+ * Copyright (C) 2010 Scott Nicholas <neutronscott@scottn.us>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <asm/pci.h>
+#include <adm8668.h>
+
+volatile u32* pci_config_address_reg = (volatile u32*)KSEG1ADDR(PCICFG_BASE);
+volatile u32* pci_config_data_reg = (volatile u32*)KSEG1ADDR(PCIDAT_BASE);
+
+#define PCI_ENABLE 0x80000000
+#define ADMPCI_IO_BASE 0x12600000
+#define ADMPCI_IO_SIZE 0x1fffff
+#define ADMPCI_MEM_BASE 0x16000000
+#define ADMPCI_MEM_SIZE 0x7ffffff
+#define PCI_CMM_IOACC_EN 0x1
+#define PCI_CMM_MEMACC_EN 0x2
+#define PCI_CMM_MASTER_EN 0x4
+#define PCI_CMM_DEF (PCI_CMM_IOACC_EN | PCI_CMM_MEMACC_EN | PCI_CMM_MASTER_EN)
+
+#define PCI_DEF_CACHE_LINE_SZ 0
+#define PCI_DEF_LATENCY_TIMER 0x20
+#define PCI_DEF_CACHE_LATENCY ((PCI_DEF_LATENCY_TIMER << 8) | PCI_DEF_CACHE_LINE_SZ)
+
+
+#define cfgaddr(bus, devfn, where) ( \
+ (bus ? ((bus->number & 0xff) << 0x10) : 0) | \
+ ((devfn & 0xff) << 0x08) | \
+ (where & 0xfc)) | PCI_ENABLE
+
+/* assumed little endian */
+static int adm8668_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ switch (size)
+ {
+ case 1:
+ *pci_config_address_reg = cfgaddr(bus, devfn, where);
+ *val = (le32_to_cpu(*pci_config_data_reg) >> ((where&3)<<3)) & 0xff;
+ break;
+ case 2:
+ if (where & 1)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ *pci_config_address_reg = cfgaddr(bus, devfn, where);
+ *val = (le32_to_cpu(*pci_config_data_reg) >> ((where&3)<<3)) & 0xffff;
+ break;
+ case 4:
+ if (where & 3)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ *pci_config_address_reg = cfgaddr(bus, devfn, where);
+ *val = le32_to_cpu(*pci_config_data_reg);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int adm8668_write_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ switch (size)
+ {
+ case 1:
+ *pci_config_address_reg = cfgaddr(bus, devfn, where);
+ *(volatile u8 *)(((int)pci_config_data_reg) + (where & 3)) = val;
+ break;
+ case 2:
+ if (where & 1)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ *pci_config_address_reg = cfgaddr(bus, devfn, where);
+ *(volatile u16 *)(((int)pci_config_data_reg) + (where & 2)) = val;
+ break;
+ case 4:
+ if (where & 3)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ *pci_config_address_reg = cfgaddr(bus, devfn, where);
+ *pci_config_data_reg = (val);
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+
+struct pci_ops adm8668_pci_ops = {
+ .read = adm8668_read_config,
+ .write = adm8668_write_config
+};
+
+
+struct resource pciioport_resource = {
+ .name = "adm8668_pci",
+ .start = ADMPCI_IO_BASE,
+ .end = ADMPCI_IO_BASE + ADMPCI_IO_SIZE,
+ .flags = IORESOURCE_IO
+};
+
+
+struct resource pciiomem_resource = {
+ .name = "adm8668_pci",
+ .start = ADMPCI_MEM_BASE,
+ .end = ADMPCI_MEM_BASE + ADMPCI_MEM_SIZE,
+ .flags = IORESOURCE_MEM
+};
+
+#ifdef CONFIG_ADM8668_DISABLE_PCI
+struct pci_controller mips_pci_channels[] = {
+ { NULL, NULL, NULL , NULL , NULL}
+};
+#else
+struct pci_controller mips_pci_channels = {
+ .pci_ops = &adm8668_pci_ops,
+ .io_resource = &pciioport_resource,
+ .mem_resource = &pciiomem_resource,
+};
+#endif
+
+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ switch (slot)
+ {
+ case 1:
+ return 14;
+ case 2:
+ return 13;
+ case 3:
+ return 12;
+ default:
+ return dev->irq;
+ }
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
+static int __init adm8668_pci_init(void)
+{
+ void __iomem *io_map_base;
+
+ printk("adm8668_pci_init()\n");
+
+ /* what's an io port? this is MIPS... *shrug* */
+ ioport_resource.start = ADMPCI_IO_BASE;
+ ioport_resource.end = ADMPCI_IO_BASE + ADMPCI_IO_SIZE;
+
+ io_map_base = ioremap(ADMPCI_IO_BASE, ADMPCI_IO_SIZE);
+ if (!io_map_base)
+ printk("io_map_base didn't work.\n");
+ mips_pci_channels.io_map_base = (unsigned long)io_map_base;
+ register_pci_controller(&mips_pci_channels);
+
+ /* this needed? linksys' gpl 2.4 did it... */
+ adm8668_write_config(NULL, 0, PCI_CACHE_LINE_SIZE, 2, 0);
+ adm8668_write_config(NULL, 0, PCI_BASE_ADDRESS_0, 4, 0);
+ adm8668_write_config(NULL, 0, PCI_BASE_ADDRESS_1, 4, 0);
+ adm8668_write_config(NULL, 0, PCI_COMMAND, 4, PCI_CMM_DEF);
+
+ return 0;
+}
+
+arch_initcall(adm8668_pci_init);
diff --git a/target/linux/adm8668/files/arch/mips/adm8668/platform.c b/target/linux/adm8668/files/arch/mips/adm8668/platform.c
new file mode 100644
index 0000000..e97ad6a
--- /dev/null
+++ b/target/linux/adm8668/files/arch/mips/adm8668/platform.c
@@ -0,0 +1,154 @@
+/*
+ * Copyright (C) 2010 Scott Nicholas <neutronscott@scottn.us>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <adm8668.h>
+
+extern char _end;
+#define PFN_ALIGN(x) (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK)
+
+static struct resource uart_resources[] = {
+ {
+ .start = ADM8668_UART0_BASE,
+ .end = ADM8668_UART0_BASE + 0xF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_LVL_UART0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device adm8668_uart_device = {
+ .name = "adm8668_uart",
+ .id = 0,
+ .resource = uart_resources,
+ .num_resources = ARRAY_SIZE(uart_resources),
+};
+
+static struct resource eth0_resources[] = {
+ {
+ .start = ADM8668_LAN_BASE,
+ .end = ADM8668_LAN_BASE + 256,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_LVL_LAN,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device adm8668_eth0_device = {
+ .name = "adm8668_eth",
+ .id = 0,
+ .resource = eth0_resources,
+ .num_resources = ARRAY_SIZE(eth0_resources),
+};
+
+static struct resource eth1_resources[] = {
+ {
+ .start = ADM8668_WAN_BASE,
+ .end = ADM8668_WAN_BASE + 256,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_LVL_WAN,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device adm8668_eth1_device = {
+ .name = "adm8668_eth",
+ .id = 1,
+ .resource = eth1_resources,
+ .num_resources = ARRAY_SIZE(eth1_resources),
+};
+
+static void adm8668_restart(char *cmd)
+{
+ int i;
+
+ /* stop eth0 and eth1 */
+ ADM8668_LAN_REG(NETCSR6) = BIT_1|BIT_13;
+ ADM8668_LAN_REG(NETCSR7) = 0;
+ ADM8668_WAN_REG(NETCSR6) = BIT_1|BIT_13;
+ ADM8668_WAN_REG(NETCSR7) = 0;
+
+ /* reset PHY */
+ ADM8668_WAN_REG(NETCSR37) = 0x20;
+ for (i = 0; i < 10000; i++)
+ ;
+ ADM8668_WAN_REG(NETCSR37) = 0;
+ for (i = 0; i < 10000; i++)
+ ;
+
+ *(volatile unsigned int *)0xB1600000 = 1; /* reset eth0 mac */
+ *(volatile unsigned int *)0xB1A00000 = 1; /* reset eth1 mac */
+ *(volatile unsigned int *)0xB1800000 = 1; /* reset wlan0 mac */
+
+ /* the real deal */
+ for (i = 0; i < 1000; i++)
+ ;
+ ADM8668_CONFIG_REG(ADM8668_CR1) = BIT_0;
+}
+
+int __devinit adm8668_devs_register(void)
+{
+ _machine_restart = adm8668_restart;
+ platform_device_register(&adm8668_uart_device);
+ platform_device_register(&adm8668_eth0_device);
+ platform_device_register(&adm8668_eth1_device);
+
+ return 0;
+}
+
+void __init plat_time_init(void)
+{
+ int adj = (ADM8668_CONFIG_REG(ADM8668_CR3) >> 11) & 0xf;
+
+ /* adjustable clock selection
+ CR3 bit 14~11, 0000 -> 175MHz, 0001 -> 180MHz, etc... */
+
+ mips_hpt_frequency = (SYS_CLOCK + adj * 5000000) / 2;
+ printk("ADM8668 CPU clock: %d MHz\n", 2*mips_hpt_frequency / 1000000);
+}
+
+void __init plat_mem_setup(void)
+{
+ /* prom_init seemed like easier place for this. it's tooo simple */
+}
+
+const char *get_system_type(void)
+{
+ unsigned long chipid = ADM8668_CONFIG_REG(ADM8668_CR0);
+ int adj = (ADM8668_CONFIG_REG(ADM8668_CR3) >> 11) & 0xf;
+ int product, revision, mhz;
+ static char ret[32];
+
+ product = chipid >> 16;
+ revision = chipid & 0xffff;
+ mhz = (SYS_CLOCK/1000000) + (adj * 5);
+
+ /* i getting fancy :\ */
+ snprintf(ret, sizeof(ret), "ADM%xr%x %dMHz", product, revision, mhz);
+
+ return ret;
+}
+
+arch_initcall(adm8668_devs_register);
diff --git a/target/linux/adm8668/files/arch/mips/adm8668/proc.c b/target/linux/adm8668/files/arch/mips/adm8668/proc.c
new file mode 100644
index 0000000..a9091fa
--- /dev/null
+++ b/target/linux/adm8668/files/arch/mips/adm8668/proc.c
@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) 2010 Scott Nicholas <neutronscott@scottn.us>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <asm/uaccess.h>
+#include <adm8668.h>
+
+int adm8668_sesled_write_proc(struct file *file, const char *buffer, unsigned long count, void *data)
+{
+ char buf[8];
+ int num;
+
+ num = (count < 8) ? count : 8;
+
+ if (copy_from_user(buf, buffer, num))
+ {
+ printk("copy_from_user failed");
+ return -EFAULT;
+ }
+ num = simple_strtoul(buf, NULL, 16);
+ switch (num)
+ {
+ case 0:
+ GPIO_SET_LOW(0);
+ CRGPIO_SET_LOW(2);
+ break;
+ case 1:
+ GPIO_SET_LOW(0);
+ CRGPIO_SET_HI(2);
+ break;
+ case 2:
+ GPIO_SET_HI(0);
+ CRGPIO_SET_HI(2);
+ break;
+ default:
+ break;
+ }
+
+ return count;
+}
+
+int adm8668_sesled_read_proc(char *buf, char **start, off_t offset, int count, int *eof, void *data)
+{
+ int len = 0;
+ int led_state = 0;
+
+ led_state = (ADM8668_CONFIG_REG(CRGPIO_REG) & 0x100) ? 1 : 0;
+ led_state += (ADM8668_WLAN_REG(GPIO_REG) & 0x40) ? 2 : 0;
+ len += sprintf(buf+len, "%s\n",
+ (led_state&1) ?
+ ((led_state&2) ? "ORANGE" : "GREEN") : "OFF");
+
+ return len;
+}
+
+int adm8668_button_read_proc(char *buf, char **start, off_t offset,
+ int count, int *eof, void *data)
+{
+ int len = 0;
+ int read_once = ADM8668_CONFIG_REG(CRGPIO_REG);
+ int button_flip = (read_once >> 20) & 0x3;
+ int button_state = read_once & 0x3;
+
+ len += sprintf(buf+len, "SES: %s %s\nRESET: %s %s\n",
+ (button_state&2) ? "UP" : "DOWN",
+ (button_flip&2) ? "FLIP" : "",
+ (button_state&1) ? "UP" : "DOWN",
+ (button_flip&1) ? "FLIP" : "");
+
+ return len;
+}
+
+int __init adm8668_init_proc(void)
+{
+ struct proc_dir_entry *adm8668_proc_dir = NULL;
+ struct proc_dir_entry *sesled = NULL;
+ int bogus;
+
+ /* these are known to be lights. rest are input...? */
+ ADM8668_CONFIG_REG(CRGPIO_REG) = GPIO2_OUTPUT_ENABLE;
+ ADM8668_WLAN_REG(GPIO_REG) = GPIO0_OUTPUT_ENABLE;
+
+ /* inital read off of the flipper switcher on the button thingie */
+ bogus = ADM8668_CONFIG_REG(CRGPIO_REG);
+
+ adm8668_proc_dir = proc_mkdir("adm8668", 0);
+ if (adm8668_proc_dir == NULL) {
+ printk(KERN_ERR "ADM8668 proc: unable to create proc dir.\n");
+ return 0;
+ }
+ create_proc_read_entry("buttons", 0444, adm8668_proc_dir,
+ adm8668_button_read_proc, NULL);
+ sesled = create_proc_entry("sesled", S_IRUGO|S_IWUGO, adm8668_proc_dir);
+ if (sesled) {
+ sesled->read_proc = adm8668_sesled_read_proc;
+ sesled->write_proc = adm8668_sesled_write_proc;
+ }
+
+ return 0;
+}
+
+module_init(adm8668_init_proc);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Scott Nicholas <neutronscott@scottn.us>");
+MODULE_DESCRIPTION("ADM8668 ghetto button driver");
diff --git a/target/linux/adm8668/files/arch/mips/adm8668/prom.c b/target/linux/adm8668/files/arch/mips/adm8668/prom.c
new file mode 100644
index 0000000..53731c1
--- /dev/null
+++ b/target/linux/adm8668/files/arch/mips/adm8668/prom.c
@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) 2010 Scott Nicholas <neutronscott@scottn.us>
+ *
+ * based on work of rb532 prom.c
+ * Copyright (C) 2003, Peter Sadik <peter.sadik@idt.com>
+ * Copyright (C) 2005-2006, P.Christeas <p_christ@hol.gr>
+ * Copyright (C) 2007, Gabor Juhos <juhosg@openwrt.org>
+ * Felix Fietkau <nbd@openwrt.org>
+ * Florian Fainelli <florian@openwrt.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/console.h>
+#include <linux/string.h>
+#include <linux/serial_core.h>
+#include <asm/bootinfo.h>
+#include <adm8668.h>
+#include "u-boot.h"
+
+register volatile struct global_data *gd asm ("k0");
+
+#ifdef CONFIG_SERIAL_ADM8668_CONSOLE
+static inline unsigned int adm_uart_readl(unsigned int offset)
+{
+ return (*(volatile unsigned int *)(0xbe400000 + offset));
+}
+
+static inline void adm_uart_writel(unsigned int value, unsigned int offset)
+{
+ (*((volatile unsigned int *)(0xbe400000 + offset))) = value;
+}
+
+static void prom_putchar(char c)
+{
+ adm_uart_writel(c, UART_DR_REG);
+ while ((adm_uart_readl(UART_FR_REG) & UART_TX_FIFO_FULL) != 0)
+ ;
+}
+
+static void __init
+early_console_write(struct console *con, const char *s, unsigned n)
+{
+ while (n-- && *s) {
+ if (*s == '\n')
+ prom_putchar('\r');
+ prom_putchar(*s);
+ s++;
+ }
+}
+
+static struct console early_console __initdata = {
+ .name = "early",
+ .write = early_console_write,
+ .flags = CON_BOOT,
+ .index = -1
+};
+
+#endif
+
+void __init prom_free_prom_memory(void)
+{
+ /* No prom memory to free */
+}
+
+static inline int match_tag(char *arg, const char *tag)
+{
+ return strncmp(arg, tag, strlen(tag)) == 0;
+}
+
+static inline unsigned long tag2ul(char *arg, const char *tag)
+{
+ char *num;
+
+ num = arg + strlen(tag);
+ return simple_strtoul(num, 0, 10);
+}
+
+void __init prom_setup_cmdline(void)
+{
+ char *cp;
+ int prom_argc;
+ char **prom_argv;
+ int i;
+
+ prom_argc = fw_arg0;
+ prom_argv = (char **)KSEG0ADDR(fw_arg1);
+
+ cp = &(arcs_cmdline[0]);
+ for (i = 1; i < prom_argc; i++) {
+ prom_argv[i] = (char *)KSEG0ADDR(prom_argv[i]);
+
+ /* default bootargs has "console=/dev/ttyS0" yet console won't
+ * show up at all if you do this ... */
+ if (match_tag(prom_argv[i], "console=/dev/")) {
+ char *ptr = prom_argv[i] + strlen("console=/dev/");
+
+ strcpy(cp, "console=");
+ cp += strlen("console=");
+ strcpy(cp, ptr);
+ cp += strlen(ptr);
+ *cp++ = ' ';
+ continue;
+ }
+ strcpy(cp, prom_argv[i]);
+ cp += strlen(prom_argv[i]);
+ *cp++ = ' ';
+ }
+ if (prom_argc > 1)
+ --cp; /* trailing space */
+
+ *cp = '\0';
+}
+
+void __init prom_init(void)
+{
+ bd_t *bd = gd->bd;
+ int memsize;
+
+#ifdef CONFIG_SERIAL_ADM8668_CONSOLE
+ register_console(&early_console);
+#endif
+
+ memsize = bd->bi_memsize;
+ printk("Board info:\n");
+ printk(" Board ID: %#lx\n", bd->bi_arch_number);
+ printk(" RAM size: %d MB\n", (int)memsize/(1024*1024));
+ printk(" NOR start: %#lx\n", bd->bi_flashstart);
+ printk(" NOR size: %#lx\n", bd->bi_flashsize);
+
+ prom_setup_cmdline();
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
diff --git a/target/linux/adm8668/files/arch/mips/adm8668/serial.c b/target/linux/adm8668/files/arch/mips/adm8668/serial.c
new file mode 100644
index 0000000..7d684b8
--- /dev/null
+++ b/target/linux/adm8668/files/arch/mips/adm8668/serial.c
@@ -0,0 +1,638 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * ADM8668 serial driver, totally ripped the source from BCM63xx and changed
+ * all the registers to fit our hardware, and removed all the features that
+ * I didn't know because our GPL'd serial driver was way lame.
+ *
+ * Copyright (C) 2010 Scott Nicholas <neutronscott@scottn.us>
+ * Derived directly from bcm63xx_uart
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ *
+ */
+
+#if defined(CONFIG_SERIAL_ADM8668_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/clk.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/sysrq.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <adm8668.h>
+
+#define ADM8668_NR_UARTS 1
+
+static struct uart_port ports[ADM8668_NR_UARTS];
+
+/*
+ * handy uart register accessor
+ */
+static inline unsigned int adm_uart_readl(struct uart_port *port,
+ unsigned int offset)
+{
+ return (*(volatile unsigned int *)(port->membase + offset));
+}
+
+static inline void adm_uart_writel(struct uart_port *port,
+ unsigned int value, unsigned int offset)
+{
+ (*((volatile unsigned int *)(port->membase + offset))) = value;
+}
+
+/*
+ * serial core request to check if uart tx fifo is empty
+ */
+static unsigned int adm_uart_tx_empty(struct uart_port *port)
+{
+ /* we always wait for completion, no buffer is made... */
+ return 1;
+}
+
+/*
+ * serial core request to set RTS and DTR pin state and loopback mode
+ */
+static void adm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+/*
+ * serial core request to return RI, CTS, DCD and DSR pin state
+ */
+static unsigned int adm_uart_get_mctrl(struct uart_port *port)
+{
+ return 0;
+}
+
+/*
+ * serial core request to disable tx ASAP (used for flow control)
+ */
+static void adm_uart_stop_tx(struct uart_port *port)
+{
+ unsigned int val;
+
+ val = adm_uart_readl(port, UART_CR_REG);
+ val &= ~(UART_TX_INT_EN);
+ adm_uart_writel(port, val, UART_CR_REG);
+}
+
+/*
+ * serial core request to (re)enable tx
+ */
+static void adm_uart_start_tx(struct uart_port *port)
+{
+ unsigned int val;
+
+ val = adm_uart_readl(port, UART_CR_REG);
+ val |= UART_TX_INT_EN;
+ adm_uart_writel(port, val, UART_CR_REG);
+}
+
+/*
+ * serial core request to stop rx, called before port shutdown
+ */
+static void adm_uart_stop_rx(struct uart_port *port)
+{
+ unsigned int val;
+
+ val = adm_uart_readl(port, UART_CR_REG);
+ val &= ~UART_RX_INT_EN;
+ adm_uart_writel(port, val, UART_CR_REG);
+}
+
+/*
+ * serial core request to enable modem status interrupt reporting
+ */
+static void adm_uart_enable_ms(struct uart_port *port)
+{
+}
+
+/*
+ * serial core request to start/stop emitting break char
+ */
+static void adm_uart_break_ctl(struct uart_port *port, int ctl)
+{
+}
+
+/*
+ * return port type in string format
+ */
+static const char *adm_uart_type(struct uart_port *port)
+{
+ return (port->type == PORT_ADM8668) ? "adm8668_uart" : NULL;
+}
+
+/*
+ * read all chars in rx fifo and send them to core
+ */
+static void adm_uart_do_rx(struct uart_port *port)
+{
+ struct tty_struct *tty;
+ unsigned int max_count;
+
+ /* limit number of char read in interrupt, should not be
+ * higher than fifo size anyway since we're much faster than
+ * serial port */
+ max_count = 32;
+ tty = port->state->port.tty;
+ do {
+ unsigned int iestat, c, cstat;
+ char flag;
+
+ /* get overrun/fifo empty information from ier
+ * register */
+ iestat = adm_uart_readl(port, UART_FR_REG);
+ if (iestat & UART_RX_FIFO_EMPTY)
+ break;
+
+ /* recieve status */
+ cstat = adm_uart_readl(port, UART_RSR_REG);
+ /* clear errors */
+ adm_uart_writel(port, cstat, UART_RSR_REG);
+
+ c = adm_uart_readl(port, UART_DR_REG);
+ port->icount.rx++;
+ flag = TTY_NORMAL;
+
+ if (unlikely((cstat & UART_RX_STATUS_MASK))) {
+ /* do stats first */
+ if (cstat & UART_BREAK_ERR) {
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ continue;
+ }
+
+ if (cstat & UART_PARITY_ERR)
+ port->icount.parity++;
+ if (cstat & UART_FRAMING_ERR)
+ port->icount.frame++;
+ if (cstat & UART_OVERRUN_ERR) {
+ port->icount.overrun++;
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+
+ /* update flag wrt read_status_mask */
+ cstat &= port->read_status_mask;
+ if (cstat & UART_BREAK_ERR)
+ flag = TTY_BREAK;
+ if (cstat & UART_FRAMING_ERR)
+ flag = TTY_FRAME;
+ if (cstat & UART_PARITY_ERR)
+ flag = TTY_PARITY;
+ }
+
+ if (uart_handle_sysrq_char(port, c))
+ continue;
+
+ /* fixthis */
+ if ((cstat & port->ignore_status_mask) == 0)
+ tty_insert_flip_char(tty, c, flag);
+ } while (max_count--);
+
+ tty_flip_buffer_push(tty);
+}
+
+/*
+ * fill tx fifo with chars to send, stop when fifo is about to be full
+ * or when all chars have been sent.
+ */
+static void adm_uart_do_tx(struct uart_port *port)
+{
+ struct circ_buf *xmit;
+
+ if (port->x_char) {
+ adm_uart_writel(port, port->x_char, UART_DR_REG);
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+
+ if (uart_tx_stopped(port))
+ adm_uart_stop_tx(port);
+
+ xmit = &port->state->xmit;
+
+ if (uart_circ_empty(xmit))
+ goto txq_empty;
+ do
+ {
+ while ((adm_uart_readl(port, UART_FR_REG) & UART_TX_FIFO_FULL) != 0)
+ ;
+ adm_uart_writel(port, xmit->buf[xmit->tail], UART_DR_REG);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (1);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ goto txq_empty;
+
+ return;
+
+txq_empty:
+ adm_uart_stop_tx(port);
+}
+
+/*
+ * process uart interrupt
+ */
+static irqreturn_t adm_uart_interrupt(int irq, void *dev_id)
+{
+ struct uart_port *port;
+ unsigned int irqstat;
+
+ port = dev_id;
+ spin_lock(&port->lock);
+
+ irqstat = adm_uart_readl(port, UART_IIR_REG);
+
+ if (irqstat & (UART_RX_INT|UART_RX_TIMEOUT_INT)) {
+ adm_uart_do_rx(port);
+ }
+
+ if (irqstat & UART_TX_INT) {
+ adm_uart_do_tx(port);
+ }
+ spin_unlock(&port->lock);
+ return IRQ_HANDLED;
+}
+
+/*
+ * enable rx & tx operation on uart
+ */
+static void adm_uart_enable(struct uart_port *port)
+{
+ unsigned int val;
+
+ val = adm_uart_readl(port, UART_CR_REG);
+ // BREAK_INT too
+ val |= (UART_RX_INT_EN | UART_RX_TIMEOUT_INT_EN);
+ adm_uart_writel(port, val, UART_CR_REG);
+}
+
+/*
+ * disable rx & tx operation on uart
+ */
+static void adm_uart_disable(struct uart_port *port)
+{
+ unsigned int val;
+
+ val = adm_uart_readl(port, UART_CR_REG);
+ val &= ~(UART_TX_INT_EN | UART_RX_INT_EN | UART_RX_TIMEOUT_INT_EN);
+ adm_uart_writel(port, val, UART_CR_REG);
+}
+
+/*
+ * clear all unread data in rx fifo and unsent data in tx fifo
+ */
+static void adm_uart_flush(struct uart_port *port)
+{
+ /* read any pending char to make sure all irq status are
+ * cleared */
+ (void)adm_uart_readl(port, UART_DR_REG);
+}
+
+/*
+ * serial core request to initialize uart and start rx operation
+ */
+static int adm_uart_startup(struct uart_port *port)
+{
+ int ret;
+
+ /* clear any pending external input interrupt */
+ (void)adm_uart_readl(port, UART_IIR_REG);
+
+ /* register irq and enable rx interrupts */
+ ret = request_irq(port->irq, adm_uart_interrupt, 0,
+ adm_uart_type(port), port);
+ if (ret)
+ return ret;
+
+ adm_uart_enable(port);
+
+ return 0;
+}
+
+/*
+ * serial core request to flush & disable uart
+ */
+static void adm_uart_shutdown(struct uart_port *port)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+// adm_uart_writel(port, 0, UART_CR_REG);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ adm_uart_disable(port);
+ adm_uart_flush(port);
+ free_irq(port->irq, port);
+}
+
+/*
+ * serial core request to change current uart setting
+ */
+static void adm_uart_set_termios(struct uart_port *port,
+ struct ktermios *new,
+ struct ktermios *old)
+{
+ port->ignore_status_mask = 0;
+ uart_update_timeout(port, new->c_cflag, 115200);
+}
+
+/*
+ * serial core request to claim uart iomem
+ */
+static int adm_uart_request_port(struct uart_port *port)
+{
+ unsigned int size = 0xf;
+ if (!request_mem_region(port->mapbase, size, "adm8668")) {
+ dev_err(port->dev, "Memory region busy\n");
+ return -EBUSY;
+ }
+
+ port->membase = ioremap(port->mapbase, size);
+ if (!port->membase) {
+ dev_err(port->dev, "Unable to map registers\n");
+ release_mem_region(port->mapbase, size);
+ return -EBUSY;
+ }
+ return 0;
+}
+
+/*
+ * serial core request to release uart iomem
+ */
+static void adm_uart_release_port(struct uart_port *port)
+{
+ release_mem_region(port->mapbase, 0xf);
+ iounmap(port->membase);
+}
+
+/*
+ * serial core request to do any port required autoconfiguration
+ */
+static void adm_uart_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ if (adm_uart_request_port(port))
+ return;
+ port->type = PORT_ADM8668;
+ }
+}
+
+/*
+ * serial core request to check that port information in serinfo are
+ * suitable
+ */
+static int adm_uart_verify_port(struct uart_port *port,
+ struct serial_struct *serinfo)
+{
+ if (port->type != PORT_ADM8668)
+ return -EINVAL;
+ if (port->irq != serinfo->irq)
+ return -EINVAL;
+ if (port->iotype != serinfo->io_type)
+ return -EINVAL;
+ if (port->mapbase != (unsigned long)serinfo->iomem_base)
+ return -EINVAL;
+ return 0;
+}
+
+/* serial core callbacks */
+static struct uart_ops adm_uart_ops = {
+ .tx_empty = adm_uart_tx_empty,
+ .get_mctrl = adm_uart_get_mctrl,
+ .set_mctrl = adm_uart_set_mctrl,
+ .start_tx = adm_uart_start_tx,
+ .stop_tx = adm_uart_stop_tx,
+ .stop_rx = adm_uart_stop_rx,
+ .enable_ms = adm_uart_enable_ms,
+ .break_ctl = adm_uart_break_ctl,
+ .startup = adm_uart_startup,
+ .shutdown = adm_uart_shutdown,
+ .set_termios = adm_uart_set_termios,
+ .type = adm_uart_type,
+ .release_port = adm_uart_release_port,
+ .request_port = adm_uart_request_port,
+ .config_port = adm_uart_config_port,
+ .verify_port = adm_uart_verify_port,
+};
+
+#ifdef CONFIG_SERIAL_ADM8668_CONSOLE
+static inline void wait_for_xmitr(struct uart_port *port)
+{
+ while ((adm_uart_readl(port, UART_FR_REG) & UART_TX_FIFO_FULL) != 0)
+ ;
+}
+
+/*
+ * output given char
+ */
+static void adm_console_putchar(struct uart_port *port, int ch)
+{
+ wait_for_xmitr(port);
+ adm_uart_writel(port, ch, UART_DR_REG);
+}
+
+/*
+ * console core request to output given string
+ */
+static void adm_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ struct uart_port *port;
+ unsigned long flags;
+ int locked;
+
+ port = &ports[co->index];
+
+ local_irq_save(flags);
+ if (port->sysrq) {
+ /* adm_uart_interrupt() already took the lock */
+ locked = 0;
+ } else if (oops_in_progress) {
+ locked = spin_trylock(&port->lock);
+ } else {
+ spin_lock(&port->lock);
+ locked = 1;
+ }
+
+ /* call helper to deal with \r\n */
+ uart_console_write(port, s, count, adm_console_putchar);
+
+ /* and wait for char to be transmitted */
+ wait_for_xmitr(port);
+
+ if (locked)
+ spin_unlock(&port->lock);
+ local_irq_restore(flags);
+}
+
+/*
+ * console core request to setup given console, find matching uart
+ * port and setup it.
+ */
+static int adm_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (co->index < 0 || co->index >= ADM8668_NR_UARTS)
+ return -EINVAL;
+ port = &ports[co->index];
+ if (!port->membase)
+ return -ENODEV;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver adm_uart_driver;
+
+static struct console adm8668_console = {
+ .name = "ttyS",
+ .write = adm_console_write,
+ .device = uart_console_device,
+ .setup = adm_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &adm_uart_driver,
+};
+
+static int __init adm8668_console_init(void)
+{
+ register_console(&adm8668_console);
+ return 0;
+}
+
+console_initcall(adm8668_console_init);
+
+#define ADM8668_CONSOLE (&adm8668_console)
+#else
+#define ADM8668_CONSOLE NULL
+#endif /* CONFIG_SERIAL_ADM8668_CONSOLE */
+
+static struct uart_driver adm_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "adm8668_uart",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .nr = 1,
+ .cons = ADM8668_CONSOLE,
+};
+
+/*
+ * platform driver probe/remove callback
+ */
+static int __devinit adm_uart_probe(struct platform_device *pdev)
+{
+ struct resource *res_mem, *res_irq;
+ struct uart_port *port;
+ int ret;
+
+ if (pdev->id < 0 || pdev->id >= ADM8668_NR_UARTS)
+ return -EINVAL;
+
+ if (ports[pdev->id].membase)
+ return -EBUSY;
+
+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res_mem)
+ return -ENODEV;
+
+ res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res_irq)
+ return -ENODEV;
+
+ port = &ports[pdev->id];
+ memset(port, 0, sizeof(*port));
+ port->iotype = UPIO_MEM;
+ port->mapbase = res_mem->start;
+ port->irq = res_irq->start;
+ port->ops = &adm_uart_ops;
+ port->flags = UPF_BOOT_AUTOCONF;
+ port->dev = &pdev->dev;
+ port->fifosize = 8;
+ port->uartclk = ADM8668_UARTCLK_FREQ;
+
+ ret = uart_add_one_port(&adm_uart_driver, port);
+ if (ret) {
+ ports[pdev->id].membase = 0;
+ return ret;
+ }
+ platform_set_drvdata(pdev, port);
+ return 0;
+}
+
+static int __devexit adm_uart_remove(struct platform_device *pdev)
+{
+ struct uart_port *port;
+
+ port = platform_get_drvdata(pdev);
+ uart_remove_one_port(&adm_uart_driver, port);
+ platform_set_drvdata(pdev, NULL);
+ /* mark port as free */
+ ports[pdev->id].membase = 0;
+ return 0;
+}
+
+/*
+ * platform driver stuff
+ */
+static struct platform_driver adm_uart_platform_driver = {
+ .probe = adm_uart_probe,
+ .remove = __devexit_p(adm_uart_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "adm8668_uart",
+ },
+};
+
+static int __init adm_uart_init(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&adm_uart_driver);
+ if (ret)
+ return ret;
+
+ ret = platform_driver_register(&adm_uart_platform_driver);
+ if (ret)
+ uart_unregister_driver(&adm_uart_driver);
+
+ return ret;
+}
+
+static void __exit adm_uart_exit(void)
+{
+ platform_driver_unregister(&adm_uart_platform_driver);
+ uart_unregister_driver(&adm_uart_driver);
+}
+
+module_init(adm_uart_init);
+module_exit(adm_uart_exit);
+
+MODULE_AUTHOR("Scott Nicholas <neutronscott@scottn.us>");
+MODULE_DESCRIPTION("ADM8668 integrated uart driver");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/adm8668/files/arch/mips/adm8668/u-boot.h b/target/linux/adm8668/files/arch/mips/adm8668/u-boot.h
new file mode 100644
index 0000000..d9d2268
--- /dev/null
+++ b/target/linux/adm8668/files/arch/mips/adm8668/u-boot.h
@@ -0,0 +1,52 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _U_BOOT_H_
+#define _U_BOOT_H_ 1
+
+typedef struct bd_info {
+ int bi_baudrate; /* serial console baudrate */
+ unsigned long bi_ip_addr; /* IP Address */
+ unsigned char bi_enetaddr[6]; /* Ethernet adress */
+ unsigned long bi_arch_number; /* unique id for this board */
+ unsigned long bi_boot_params; /* where this board expects params */
+ unsigned long bi_memstart; /* start of DRAM memory */
+ unsigned long bi_memsize; /* size of DRAM memory in bytes */
+ unsigned long bi_flashstart; /* start of FLASH memory */
+ unsigned long bi_flashsize; /* size of FLASH memory */
+ unsigned long bi_flashoffset; /* reserved area for startup monitor */
+} bd_t;
+
+struct global_data {
+ bd_t *bd; /* board data... */
+ unsigned long flags;
+ unsigned long baudrate;
+ unsigned long have_console; /* serial_init() was called */
+ unsigned long ram_size; /* RAM size */
+ unsigned long reloc_off; /* Relocation Offset */
+ unsigned long env_addr; /* Address of Environment struct */
+ unsigned long env_valid; /* Checksum of Environment valid? */
+ void **jt; /* jump table */
+};
+
+#endif /* _U_BOOT_H_ */
diff --git a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/adm8668.h b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/adm8668.h
new file mode 100644
index 0000000..7898ccf
--- /dev/null
+++ b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/adm8668.h
@@ -0,0 +1,416 @@
+/************************************************************************
+ *
+ * Copyright (c) 2005
+ * Infineon Technologies AG
+ * St. Martin Strasse 53; 81669 Muenchen; Germany
+ *
+ ************************************************************************/
+
+#ifndef __ADM8668_H__
+#define __ADM8668_H__
+
+#include <asm/addrspace.h>
+#include "bsp_sup.h"
+
+#define MEM_KSEG0_BASE 0x80000000
+#define MEM_KSEG1_BASE 0xA0000000
+#define MEM_SEG_MASK 0xE0000000
+#define KVA2PA(_addr) ((unsigned long)(_addr) & ~MEM_SEG_MASK)
+
+#define MIPS_KSEG0A(_addr) (KVA2PA(_addr) | MEM_KSEG0_BASE)
+#define MIPS_KSEG1A(_addr) (KVA2PA(_addr) | MEM_KSEG1_BASE)
+
+#define PA2VA(_addr) (KVA2PA(_addr) | MEM_KSEG1_BASE)
+#define PA2CACHEVA(_addr) (KVA2PA(_addr) | MEM_KSEG0_BASE)
+
+
+/*======================= Physical Memory Map ============================*/
+#define ADM8668_SDRAM_BASE 0
+#define ADM8668_SMEM1_BASE 0x10000000
+#define ADM8668_MPMC_BASE 0x11000000
+#define ADM8668_USB_BASE 0x11200000
+#define ADM8668_CONFIG_BASE 0x11400000
+#define ADM8668_WAN_BASE 0x11600000
+#define ADM8668_WLAN_BASE 0x11800000
+#define ADM8668_LAN_BASE 0x11A00000
+#define ADM8668_INTC_BASE 0x1E000000
+#define ADM8668_TMR_BASE 0x1E200000
+#define ADM8668_UART0_BASE 0x1E400000
+#define ADM8668_SMEM0_BASE 0x1FC00000
+#define ADM8668_NAND_BASE 0x1fffff00
+
+#define PCICFG_BASE 0x12200000
+#define PCIDAT_BASE 0x12400000
+
+/* for PCI bridge fixup ! */
+#define PCI_BRIDGE_MASK 0x40
+
+/* WLAN registers */
+#define WCSR0 0x00
+#define WCSR11A 0x5c
+
+#define GPIO_REG WCSR11A
+
+#define ADM8668_WLAN_REG(_reg) \
+ (*((volatile unsigned int *)(PA2VA(ADM8668_WLAN_BASE + (_reg)))))
+
+/* configuration registers */
+#define ADM8668_CR0 0x00
+#define ADM8668_CR1 0x04
+#define ADM8668_CR2 0x08
+#define ADM8668_CR3 0x0C
+#define ADM8668_CR8 0x20
+#define ADM8668_CR10 0x28
+#define ADM8668_CR11 0x2C
+#define ADM8668_CR12 0x30
+#define ADM8668_CR13 0x34
+#define ADM8668_CR14 0x38
+#define ADM8668_CR15 0x3C
+#define ADM8668_CR16 0x40
+#define ADM8668_CR17 0x44
+#define ADM8668_CR18 0x48
+#define ADM8668_CR19 0x4C
+#define ADM8668_CR20 0x50
+#define ADM8668_CR21 0x54
+#define ADM8668_CR22 0x58
+#define ADM8668_CR23 0x5C
+#define ADM8668_CR24 0x60
+#define ADM8668_CR25 0x64
+#define ADM8668_CR26 0x68
+#define ADM8668_CR27 0x6C
+#define ADM8668_CR28 0x70
+#define ADM8668_CR29 0x74
+#define ADM8668_CR30 0x78
+#define ADM8668_CR31 0x7C
+#define ADM8668_CR32 0x80
+#define ADM8668_CR33 0x84
+#define ADM8668_CR34 0x88
+#define ADM8668_CR35 0x8C
+#define ADM8668_CR36 0x90
+#define ADM8668_CR37 0x94
+#define ADM8668_CR38 0x98
+#define ADM8668_CR39 0x9C
+#define ADM8668_CR40 0xA0
+#define ADM8668_CR41 0xA4
+#define ADM8668_CR42 0xA8
+#define ADM8668_CR43 0xAC
+#define ADM8668_CR44 0xB0
+#define ADM8668_CR45 0xB4
+#define ADM8668_CR46 0xB8
+#define ADM8668_CR47 0xBC
+#define ADM8668_CR48 0xC0
+#define ADM8668_CR49 0xC4
+#define ADM8668_CR50 0xC8
+#define ADM8668_CR51 0xCC
+#define ADM8668_CR52 0xD0
+#define ADM8668_CR53 0xD4
+#define ADM8668_CR54 0xD8
+#define ADM8668_CR55 0xDC
+#define ADM8668_CR56 0xE0
+#define ADM8668_CR57 0xE4
+#define ADM8668_CR58 0xE8
+#define ADM8668_CR59 0xEC
+#define ADM8668_CR60 0xF0
+#define ADM8668_CR61 0xF4
+#define ADM8668_CR62 0xF8
+#define ADM8668_CR63 0xFC
+#define ADM8668_CR64 0x100
+#define ADM8668_CR65 0x104
+#define ADM8668_CR66 0x108
+#define ADM8668_CR67 0x10C
+#define ADM8668_CR68 0x110
+
+#define CRGPIO_REG ADM8668_CR8
+
+#define ADM8668_CONFIG_REG(_reg) \
+ (*((volatile unsigned int *)(PA2VA(ADM8668_CONFIG_BASE + (_reg)))))
+#define ADM8668_MPMC_REG(_reg) \
+ (*((volatile unsigned int *)(PA2VA(ADM8668_MPMC_BASE + (_reg)))))
+
+
+/*========================== Interrupt Controller ==========================*/
+/* registers offset */
+#define IRQ_STATUS_REG 0x00 /* Read */
+#define IRQ_RAW_STATUS_REG 0x04 /* Read */
+#define IRQ_ENABLE_REG 0x08 /* Read/Write */
+#define IRQ_DISABLE_REG 0x0C /* Write */
+#define IRQ_SOFT_REG 0x10 /* Write */
+
+#define FIQ_STATUS_REG 0x100 /* Read */
+#define FIQ_RAW_STATUS_REG 0x104
+#define FIQ_ENABLE_REG 0x108
+#define FIQ_DISABLE_REG 0x10c
+
+
+/* Macro for accessing Interrupt controller register */
+#define ADM8668_INTC_REG(_reg) \
+ (*((volatile unsigned long *)(PA2VA(ADM8668_INTC_BASE + (_reg)))))
+
+
+/* interrupt levels */
+#define INT_LVL_SWI 1
+#define INT_LVL_COMMS_RX 2
+#define INT_LVL_COMMS_TX 3
+#define INT_LVL_TIMERINT0 4
+#define INT_LVL_TIMERINT1 5
+#define INT_LVL_UART0 6
+#define INT_LVL_LAN 7
+#define INT_LVL_WAN 8
+#define INT_LVL_WLAN 9
+#define INT_LVL_GPIO 10
+#define INT_LVL_IDE 11
+#define INT_LVL_PCI2 12
+#define INT_LVL_PCI1 13
+#define INT_LVL_PCI0 14
+#define INT_LVL_USB 15
+#define INT_LVL_MAX INT_LVL_USB
+
+#define IRQ_MASK 0xffff
+
+#define IRQ_SWI (0x1<<INT_LVL_SWI)
+#define IRQ_TIMERINT0 (0x1<<INT_LVL_TIMERINT0)
+#define IRQ_TIMERINT1 (0x1<<INT_LVL_TIMERINT1)
+#define IRQ_UART0 (0x1<<INT_LVL_UART0)
+#define IRQ_LAN (0x1<<INT_LVL_LAN)
+#define IRQ_WAN (0x1<<INT_LVL_WAN)
+#define IRQ_WLAN (0x1<<INT_LVL_WLAN)
+#define IRQ_GPIO (0x1<<INT_LVL_GPIO)
+#define IRQ_IDEINT (0x1<<INT_LVL_IDE)
+#define IRQ_PCI2 (0x1<<INT_LVL_PCI2)
+#define IRQ_PCI1 (0x1<<INT_LVL_PCI1)
+#define IRQ_PCI0 (0x1<<INT_LVL_PCI0)
+#define IRQ_USB (0x1<<INT_LVL_USB)
+
+
+/*=========================== UART Control Register ========================*/
+#define UART_DR_REG 0x00
+#define UART_RSR_REG 0x04
+#define UART_ECR_REG 0x04
+#define UART_LCR_H_REG 0x08
+#define UART_LCR_M_REG 0x0c
+#define UART_LCR_L_REG 0x10
+#define UART_CR_REG 0x14
+#define UART_FR_REG 0x18
+#define UART_IIR_REG 0x1c
+#define UART_ICR_REG 0x1C
+#define UART_ILPR_REG 0x20
+
+/* rsr/ecr reg */
+#define UART_OVERRUN_ERR 0x08
+#define UART_BREAK_ERR 0x04
+#define UART_PARITY_ERR 0x02
+#define UART_FRAMING_ERR 0x01
+#define UART_RX_STATUS_MASK 0x0f
+#define UART_RX_ERROR ( UART_BREAK_ERR \
+ | UART_PARITY_ERR \
+ | UART_FRAMING_ERR)
+
+/* lcr_h reg */
+#define UART_SEND_BREAK 0x01
+#define UART_PARITY_EN 0x02
+#define UART_EVEN_PARITY 0x04
+#define UART_TWO_STOP_BITS 0x08
+#define UART_ENABLE_FIFO 0x10
+
+#define UART_WLEN_5BITS 0x00
+#define UART_WLEN_6BITS 0x20
+#define UART_WLEN_7BITS 0x40
+#define UART_WLEN_8BITS 0x60
+#define UART_WLEN_MASK 0x60
+
+/* cr reg */
+#define UART_PORT_EN 0x01
+#define UART_SIREN 0x02
+#define UART_SIRLP 0x04
+#define UART_MODEM_STATUS_INT_EN 0x08
+#define UART_RX_INT_EN 0x10
+#define UART_TX_INT_EN 0x20
+#define UART_RX_TIMEOUT_INT_EN 0x40
+#define UART_LOOPBACK_EN 0x80
+
+/* fr reg */
+#define UART_CTS 0x01
+#define UART_DSR 0x02
+#define UART_DCD 0x04
+#define UART_BUSY 0x08
+#define UART_RX_FIFO_EMPTY 0x10
+#define UART_TX_FIFO_FULL 0x20
+#define UART_RX_FIFO_FULL 0x40
+#define UART_TX_FIFO_EMPTY 0x80
+
+/* iir/icr reg */
+#define UART_MODEM_STATUS_INT 0x01
+#define UART_RX_INT 0x02
+#define UART_TX_INT 0x04
+#define UART_RX_TIMEOUT_INT 0x08
+
+#define UART_INT_MASK 0x0f
+
+#ifdef _FPGA_
+#define ADM8668_UARTCLK_FREQ 3686400
+#else
+#define ADM8668_UARTCLK_FREQ 62500000
+#endif
+
+#define UART_BAUDDIV(_rate) \
+ ((unsigned long)(ADM8668_UARTCLK_FREQ/(16*(_rate)) - 1))
+
+/* uart_baudrate */
+#define UART_230400bps_DIVISOR UART_BAUDDIV(230400)
+#define UART_115200bps_DIVISOR UART_BAUDDIV(115200)
+#define UART_76800bps_DIVISOR UART_BAUDDIV(76800)
+#define UART_57600bps_DIVISOR UART_BAUDDIV(57600)
+#define UART_38400bps_DIVISOR UART_BAUDDIV(38400)
+#define UART_19200bps_DIVISOR UART_BAUDDIV(19200)
+#define UART_14400bps_DIVISOR UART_BAUDDIV(14400)
+#define UART_9600bps_DIVISOR UART_BAUDDIV(9600)
+#define UART_2400bps_DIVISOR UART_BAUDDIV(2400)
+#define UART_1200bps_DIVISOR UART_BAUDDIV(1200)
+
+
+/*=========================== Counter Timer ==============================*/
+#define TIMER0_REG_BASE ADM8668_TMR_BASE
+#define TIMER1_REG_BASE ADM8668_TMR_BASE+0x20
+
+#define TIMER_LOAD_REG 0x00
+#define TIMER_VALUE_REG 0x04
+#define TIMER_CTRL_REG 0x08
+#define TIMER_CLR_REG 0x0c
+
+/* TIMER_LOAD_REG */
+#ifdef _FPGA_
+#define SYS_CLOCK 56000000
+#else
+#define SYS_CLOCK 175000000
+#endif
+
+#define SYS_PRESCALE 256
+
+#define TMR_10MS_TICKS (SYS_CLOCK/SYS_PRESCALE/100)
+
+/* TIMER_CTRL_REG */
+#define TMR_PRESCALE_1 0x00
+#define TMR_PRESCALE_16 0x04
+#define TMR_PRESCALE_256 0x08
+#define TMR_MODE_PERIODIC 0x40
+#define TMR_ENABLE 0x80
+
+/* TIMER_CLR_REG */
+#define TMR_CLEAR_BIT 1
+
+
+/* Macro for access MPMC register */
+#define ADM8668_TMR_REG(base, _offset) \
+ (*((volatile unsigned long *)(PA2VA(base + (_offset)))))
+
+
+/* For GPIO control */
+#define GPIO0_OUTPUT_ENABLE 0x1000
+#define GPIO1_OUTPUT_ENABLE 0x2000
+#define GPIO2_OUTPUT_ENABLE 0x4000
+#define GPIO_OUTPUT_ENABLE_ALL 0x7000
+#define GPIO0_OUTPUT_1 0x40
+#define GPIO1_OUTPUT_1 0x80
+#define GPIO2_OUTPUT_1 0x100
+#define GPIO0_INPUT_1 0x1
+#define GPIO1_INPUT_1 0x2
+#define GPIO2_INPUT_1 0x4
+
+#define GPIO_SET_HI(num) \
+ ADM8668_WLAN_REG(GPIO_REG) |= (1 << (6 + num))
+
+#define GPIO_SET_LOW(num) \
+ ADM8668_WLAN_REG(GPIO_REG) &= ~(1 << (6 + num))
+
+#define GPIO_TOGGLE(num) \
+ ADM8668_WLAN_REG(GPIO_REG) ^= (1 << (6 + num))
+
+#define CRGPIO_SET_HI(num) \
+ ADM8668_CONFIG_REG(CRGPIO_REG) |= (1 << (6 + num))
+
+#define CRGPIO_SET_LOW(num) \
+ ADM8668_CONFIG_REG(CRGPIO_REG) &= ~(1 << (6 + num))
+
+#define CRGPIO_TOGGLE(num) \
+ ADM8668_CONFIG_REG(CRGPIO_REG) ^= (1 << (6 + num))
+
+
+/*==========================================================================*/
+/* Cache Controller */
+#define ADM8668_CACHE_LINE_SIZE 16
+
+#define BIT_0 0x00000001
+#define BIT_1 0x00000002
+#define BIT_2 0x00000004
+#define BIT_3 0x00000008
+#define BIT_4 0x00000010
+#define BIT_5 0x00000020
+#define BIT_6 0x00000040
+#define BIT_7 0x00000080
+#define BIT_8 0x00000100
+#define BIT_9 0x00000200
+#define BIT_10 0x00000400
+#define BIT_11 0x00000800
+#define BIT_12 0x00001000
+#define BIT_13 0x00002000
+#define BIT_14 0x00004000
+#define BIT_15 0x00008000
+#define BIT_16 0x00010000
+#define BIT_17 0x00020000
+#define BIT_18 0x00040000
+#define BIT_19 0x00080000
+#define BIT_20 0x00100000
+#define BIT_21 0x00200000
+#define BIT_22 0x00400000
+#define BIT_23 0x00800000
+#define BIT_24 0x01000000
+#define BIT_25 0x02000000
+#define BIT_26 0x04000000
+#define BIT_27 0x08000000
+#define BIT_28 0x10000000
+#define BIT_29 0x20000000
+#define BIT_30 0x40000000
+#define BIT_31 0x80000000
+
+/* network regs */
+#define NETCSR0 0x0
+#define NETCSR1 0x08
+#define NETCSR2 0x10
+#define NETCSR3 0x18
+#define NETCSR4 0x20
+#define NETCSR5 0x28
+#define NETCSR6 0x30
+#define NETCSR7 0x38
+#define NETCSR8 0x40
+#define NETCSR9 0x48
+#define NETCSR10 0x50
+#define NETCSR11 0x58
+#define NETCSR12 0x60
+#define NETCSR13 0x68
+#define NETCSR14 0x70
+#define NETCSR15 0x78
+#define NETCSR36 0xD0
+#define NETCSR36A 0xD4
+#define NETCSR36B 0xD8
+#define NETCSR36C 0xDC // dummy
+#define NETCSR36D 0xE0
+#define NETCSR36E 0xE4
+#define NETCSR36F 0xE8
+#define NETCSR36G 0xEC
+#define NETCSR36H 0xF0
+#define NETCSR36I 0xF4
+#define NETCSR37 0xF8
+
+/* for descriptor skip DWs */
+#define NETDESCSKIP_1DW BIT_2
+#define NETDESCSKIP_2DW BIT_3
+#define NETDESCSKIP_3DW (BIT_3|BIT_2)
+#define NETDESCSKIP_4DW BIT_4
+
+
+#define ADM8668_LAN_REG(_reg) \
+ (*((volatile unsigned int *)(PA2VA(ADM8668_LAN_BASE + (_reg)))))
+#define ADM8668_WAN_REG(_reg) \
+ (*((volatile unsigned int *)(PA2VA(ADM8668_WAN_BASE + (_reg)))))
+
+#endif /* __ADM8668_H__ */
diff --git a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/bsp_sup.h b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/bsp_sup.h
new file mode 100644
index 0000000..23fdab9
--- /dev/null
+++ b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/bsp_sup.h
@@ -0,0 +1,84 @@
+/************************************************************************
+ *
+ * Copyright (c) 2005
+ * Infineon Technologies AG
+ * St. Martin Strasse 53; 81669 Muenchen; Germany
+ *
+ ************************************************************************/
+#ifndef _BSP_SUP_H_
+#define _BSP_SUP_H_
+
+#define ADD_WAN_MAC
+#define CONFIG_IFX_GAN
+#define UBOOT_CFG_ENV_SIZE (0x400-4)
+#define ADM8668_BL_MAGIC 0x6c62676d
+#define ADM8668_MAC_MAGIC 0x69666164
+#define ADM8668_VER_MAGIC 0x7276676d
+#define ADM8668_ID_MAGIC 0x6469676d
+#define ADM8668_IF_MAGIC 0x6669676d
+#define ADM8668_WANMAC_MAGIC 0x69666164
+#define ADM8668_IMEI_MAGIC 0x6669676e
+
+#define BSP_IFNAME_MAX_LEN 15
+#define BOOT_LINE_SIZE 255
+#define BSP_STR_LEN 79
+
+
+/*
+ * Boot mode configuration
+ */
+typedef struct BTMODE_CFG_S
+{
+ unsigned long btmode;
+ unsigned long dlmethod;
+} BTMODE_CFG_T;
+
+
+/*
+ * Interface configuration
+ */
+typedef struct IF_CFG_S
+{
+ char ifname[BSP_IFNAME_MAX_LEN+1];
+ unsigned long ip;
+ unsigned long mask;
+ unsigned long gateway;
+} IF_CFG_T;
+
+
+/*
+ * Board configuration
+ */
+typedef struct BOARD_CFG_S
+{
+ unsigned long blmagic;
+ unsigned char blreserved[UBOOT_CFG_ENV_SIZE];
+
+ unsigned long macmagic;
+ unsigned char mac[8];
+ unsigned long macnum;
+
+ unsigned long idmagic;
+ unsigned char serial[BSP_STR_LEN+1];
+
+ unsigned long vermagic;
+ unsigned char ver[BSP_STR_LEN+1];
+
+ unsigned long ifmagic;
+ IF_CFG_T ifcfg[8];
+
+ unsigned long btmagic;
+ BTMODE_CFG_T bootmode;
+
+ unsigned long wanmagic;
+ unsigned char wanmac[8];
+
+ unsigned long imeimagic;
+ unsigned char imei0[16];
+ unsigned char imei1[16];
+} BOARD_CFG_T, *PBOARD_CFG_T;
+
+#define ADM8668_BOARD_CFG_ADDR (ADM8668_SMEM0_BASE + CONFIG_ADM8668_BSP_OFFSET*1024)
+#define ADM8668_BOARD_CFG_SIZE (CONFIG_ADM8668_BSP_SIZE*1024)
+
+#endif /* _BSP_SUP_H_ */
diff --git a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/irq.h b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/irq.h
new file mode 100644
index 0000000..425bba6
--- /dev/null
+++ b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/irq.h
@@ -0,0 +1,35 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_ADM8668_IRQ_H
+#define __ASM_MACH_ADM8668_IRQ_H
+
+#ifndef NR_IRQS
+#define NR_IRQS 32
+#endif
+
+#ifdef CONFIG_IRQ_CPU
+
+#ifndef MIPS_CPU_IRQ_BASE
+#define MIPS_CPU_IRQ_BASE 16
+#endif
+
+#ifdef CONFIG_IRQ_CPU_RM7K
+#ifndef RM7K_CPU_IRQ_BASE
+#define RM7K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+8)
+#endif
+#endif
+
+#ifdef CONFIG_IRQ_CPU_RM9K
+#ifndef RM9K_CPU_IRQ_BASE
+#define RM9K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+12)
+#endif
+#endif
+
+#endif /* CONFIG_IRQ_CPU */
+
+#endif /* __ASM_MACH_ADM8668_IRQ_H */
diff --git a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/prom.h b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/prom.h
new file mode 100644
index 0000000..000d0f4
--- /dev/null
+++ b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/prom.h
@@ -0,0 +1,55 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * MIPS boards bootprom interface for the Linux kernel.
+ *
+ */
+/************************************************************************
+ *
+ * Copyright (c) 2005
+ * Infineon Technologies AG
+ * St. Martin Strasse 53; 81669 Muenchen; Germany
+ *
+ ************************************************************************/
+#ifndef _MIPS_PROM_H
+#define _MIPS_PROM_H
+
+extern char *prom_getcmdline(void);
+extern char *prom_getenv(char *name);
+extern void setup_prom_printf(int tty_no);
+extern void prom_printf(char *fmt, ...);
+extern void prom_init_cmdline(void);
+extern void prom_meminit(void);
+extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
+extern void prom_free_prom_memory (void);
+extern void mips_display_message(const char *str);
+extern void mips_display_word(unsigned int num);
+extern int get_ethernet_addr(char *ethernet_addr);
+
+/* Memory descriptor management. */
+#define PROM_MAX_PMEMBLOCKS 32
+struct prom_pmemblock {
+ unsigned long base; /* Within KSEG0. */
+ unsigned int size; /* In bytes. */
+ unsigned int type; /* free or prom memory */
+};
+
+#endif /* !(_MIPS_PROM_H) */
diff --git a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/war.h b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/war.h
new file mode 100644
index 0000000..7180043
--- /dev/null
+++ b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_ADM8668_WAR_H
+#define __ASM_MIPS_MACH_ADM8668_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_ADM8668_WAR_H */
diff --git a/target/linux/adm8668/files/drivers/mtd/maps/adm8668.c b/target/linux/adm8668/files/drivers/mtd/maps/adm8668.c
new file mode 100644
index 0000000..903decc
--- /dev/null
+++ b/target/linux/adm8668/files/drivers/mtd/maps/adm8668.c
@@ -0,0 +1,126 @@
+/*
+ * Copyright (C) 2010 Scott Nicholas <neutronscott@scottn.us>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/magic.h>
+#include <asm/io.h>
+
+#define FLASH_SIZE 0x800000
+#define FLASH_PHYS_ADDR 0x10000000
+
+/* just interested in part of the full struct */
+struct squashfs_super_block {
+ __le32 s_magic;
+ __le32 pad0[9]; /* it's not really padding */
+ __le64 bytes_used;
+};
+
+static struct mtd_info *mymtd;
+
+static struct map_info nor_map = {
+ name: "adm8668-nor",
+ size: FLASH_SIZE,
+ phys: FLASH_PHYS_ADDR,
+ bankwidth: 2,
+};
+
+static struct mtd_partition nor_parts[] = {
+ { name: "linux", offset: 0x40000, size: FLASH_SIZE - 0x40000, },
+ { name: "rootfs", offset: 0x200000, size: 0x400000, },
+ { name: NULL, },
+};
+
+int __init init_mtd_partitions(struct mtd_info *mtd, size_t size)
+{
+ int blocksize, off;
+ size_t len;
+ struct squashfs_super_block hdr;
+
+ blocksize = mtd->erasesize;
+ if (blocksize < 0x10000)
+ blocksize = 0x10000;
+
+ memset(&hdr, 0xe5, sizeof(hdr));
+ /* find and size squashfs */
+ for (off = (128*1024); off < size; off += blocksize) {
+ if (mtd->read(mtd, off, sizeof(hdr), &len, (char *)&hdr) ||
+ len != sizeof(hdr))
+ continue;
+
+ if (hdr.s_magic == SQUASHFS_MAGIC) {
+ printk(KERN_INFO "%s: Filesystem type: squashfs, off=%#x size=%#x\n",
+ mtd->name, off, (unsigned int)hdr.bytes_used);
+ /* Update the squashfs start address only! */
+ nor_parts[1].offset = off;
+ nor_parts[1].size = FLASH_SIZE - off;
+ return 2;
+ }
+ }
+ return 2;
+}
+
+int __init init_nor(void)
+{
+ int nr_parts;
+
+ printk(KERN_NOTICE "ADM8668 NOR flash device: %#x at %#x\n",
+ FLASH_SIZE, FLASH_PHYS_ADDR);
+
+ nor_map.virt = ioremap(FLASH_PHYS_ADDR, FLASH_SIZE);
+ if (!nor_map.virt) {
+ printk("Failed to ioremap\n");
+ return -EIO;
+ }
+
+ simple_map_init(&nor_map);
+ mymtd = do_map_probe("cfi_probe", &nor_map);
+ if (!mymtd) {
+ iounmap((void *)nor_map.virt);
+ return -ENXIO;
+ }
+ mymtd->owner = THIS_MODULE;
+ nr_parts = init_mtd_partitions(mymtd, mymtd->size);
+ add_mtd_partitions(mymtd, nor_parts, nr_parts);
+
+ return 0;
+}
+
+static void __exit cleanup_nor(void)
+{
+ if (mymtd) {
+ del_mtd_partitions(mymtd);
+ map_destroy(mymtd);
+ }
+ if (nor_map.virt) {
+ iounmap((void *)nor_map.virt);
+ nor_map.virt = 0;
+ }
+}
+
+module_init(init_nor);
+module_exit(cleanup_nor);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Scott Nicholas <neutronscott@scottn.us>");
+MODULE_DESCRIPTION("MTD map driver for ADM8668 NOR Flash");
diff --git a/target/linux/adm8668/image/Makefile b/target/linux/adm8668/image/Makefile
new file mode 100644
index 0000000..e9d183b
--- /dev/null
+++ b/target/linux/adm8668/image/Makefile
@@ -0,0 +1,26 @@
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+define Build/Clean
+ $(MAKE) -C lzma-loader clean
+endef
+
+define Image/Prepare
+ cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
+ $(MAKE) -C lzma-loader \
+ KDIR="$(KDIR)" \
+ clean compile
+endef
+
+define Image/Build
+ ./my-mkimage $(KDIR)/loader.bin $(KDIR)/root.squashfs \
+ $(BIN_DIR)/$(IMG_PREFIX)-$(1).bin
+endef
+
+$(eval $(call BuildImage))
diff --git a/target/linux/adm8668/image/lzma-loader/Makefile b/target/linux/adm8668/image/lzma-loader/Makefile
new file mode 100644
index 0000000..f6bc7ce
--- /dev/null
+++ b/target/linux/adm8668/image/lzma-loader/Makefile
@@ -0,0 +1,41 @@
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME := loader
+PKG_VERSION := 0.05
+
+PKG_BUILD_DIR := $(KDIR)/$(PKG_NAME)-$(PKG_VERSION)$(LOADER_TYPE)
+
+$(PKG_BUILD_DIR)/.prepared:
+ mkdir $(PKG_BUILD_DIR)
+ $(CP) ./src/* $(PKG_BUILD_DIR)/
+ touch $@
+
+$(PKG_BUILD_DIR)/lzma.elf: $(PKG_BUILD_DIR)/.prepared $(PKG_BUILD_DIR)/vmlinux.lzma
+ PATH="$(TARGET_PATH)" $(MAKE) -C $(PKG_BUILD_DIR) \
+ CC="$(TARGET_CC)" CROSS_COMPILE="$(TARGET_CROSS)"
+
+$(PKG_BUILD_DIR)/vmlinux.lzma: $(KDIR)/vmlinux.lzma
+ $(CP) $< $@
+
+$(KDIR)/loader$(LOADER_TYPE).elf: $(PKG_BUILD_DIR)/lzma.elf
+ $(CP) $< $@
+
+$(KDIR)/loader$(LOADER_TYPE).bin: $(PKG_BUILD_DIR)/lzma.bin
+ $(CP) $< $@
+
+download:
+prepare: $(PKG_BUILD_DIR)/.prepared
+compile: $(KDIR)/loader$(LOADER_TYPE).elf $(KDIR)/loader$(LOADER_TYPE).bin
+install:
+
+clean:
+ rm -rf $(PKG_BUILD_DIR)
+ rm -f $(KDIR)/loader.elf
+ rm -f $(KDIR)/loader.bin
diff --git a/target/linux/adm8668/image/lzma-loader/src/LzmaDecode.c b/target/linux/adm8668/image/lzma-loader/src/LzmaDecode.c
new file mode 100644
index 0000000..8c863ef
--- /dev/null
+++ b/target/linux/adm8668/image/lzma-loader/src/LzmaDecode.c
@@ -0,0 +1,590 @@
+/*
+ LzmaDecode.c
+ LZMA Decoder (optimized for Speed version)
+
+ LZMA SDK 4.22 Copyright (c) 1999-2005 Igor Pavlov (2005-06-10)
+ http://www.7-zip.org/
+
+ LZMA SDK is licensed under two licenses:
+ 1) GNU Lesser General Public License (GNU LGPL)
+ 2) Common Public License (CPL)
+ It means that you can select one of these two licenses and
+ follow rules of that license.
+
+ SPECIAL EXCEPTION:
+ Igor Pavlov, as the author of this Code, expressly permits you to
+ statically or dynamically link your Code (or bind by name) to the
+ interfaces of this file without subjecting your linked Code to the
+ terms of the CPL or GNU LGPL. Any modifications or additions
+ to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#include "LzmaDecode.h"
+
+#ifndef Byte
+#define Byte unsigned char
+#endif
+
+#define kNumTopBits 24
+#define kTopValue ((UInt32)1 << kNumTopBits)
+
+#define kNumBitModelTotalBits 11
+#define kBitModelTotal (1 << kNumBitModelTotalBits)
+#define kNumMoveBits 5
+
+#define RC_READ_BYTE (*Buffer++)
+
+#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \
+ { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }}
+
+#ifdef _LZMA_IN_CB
+
+#define RC_TEST { if (Buffer == BufferLim) \
+ { SizeT size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \
+ BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }}
+
+#define RC_INIT Buffer = BufferLim = 0; RC_INIT2
+
+#else
+
+#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; }
+
+#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2
+
+#endif
+
+#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; }
+
+#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound)
+#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits;
+#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits;
+
+#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \
+ { UpdateBit0(p); mi <<= 1; A0; } else \
+ { UpdateBit1(p); mi = (mi + mi) + 1; A1; }
+
+#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;)
+
+#define RangeDecoderBitTreeDecode(probs, numLevels, res) \
+ { int i = numLevels; res = 1; \
+ do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \
+ res -= (1 << numLevels); }
+
+
+#define kNumPosBitsMax 4
+#define kNumPosStatesMax (1 << kNumPosBitsMax)
+
+#define kLenNumLowBits 3
+#define kLenNumLowSymbols (1 << kLenNumLowBits)
+#define kLenNumMidBits 3
+#define kLenNumMidSymbols (1 << kLenNumMidBits)
+#define kLenNumHighBits 8
+#define kLenNumHighSymbols (1 << kLenNumHighBits)
+
+#define LenChoice 0
+#define LenChoice2 (LenChoice + 1)
+#define LenLow (LenChoice2 + 1)
+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
+#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
+
+
+#define kNumStates 12
+#define kNumLitStates 7
+
+#define kStartPosModelIndex 4
+#define kEndPosModelIndex 14
+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
+
+#define kNumPosSlotBits 6
+#define kNumLenToPosStates 4
+
+#define kNumAlignBits 4
+#define kAlignTableSize (1 << kNumAlignBits)
+
+#define kMatchMinLen 2
+
+#define IsMatch 0
+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
+#define IsRepG0 (IsRep + kNumStates)
+#define IsRepG1 (IsRepG0 + kNumStates)
+#define IsRepG2 (IsRepG1 + kNumStates)
+#define IsRep0Long (IsRepG2 + kNumStates)
+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
+#define LenCoder (Align + kAlignTableSize)
+#define RepLenCoder (LenCoder + kNumLenProbs)
+#define Literal (RepLenCoder + kNumLenProbs)
+
+#if Literal != LZMA_BASE_SIZE
+StopCompilingDueBUG
+#endif
+
+#if 0
+int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size)
+{
+ unsigned char prop0;
+ if (size < LZMA_PROPERTIES_SIZE)
+ return LZMA_RESULT_DATA_ERROR;
+ prop0 = propsData[0];
+ if (prop0 >= (9 * 5 * 5))
+ return LZMA_RESULT_DATA_ERROR;
+ {
+ for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5));
+ for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9);
+ propsRes->lc = prop0;
+ /*
+ unsigned char remainder = (unsigned char)(prop0 / 9);
+ propsRes->lc = prop0 % 9;
+ propsRes->pb = remainder / 5;
+ propsRes->lp = remainder % 5;
+ */
+ }
+
+ #ifdef _LZMA_OUT_READ
+ {
+ int i;
+ propsRes->DictionarySize = 0;
+ for (i = 0; i < 4; i++)
+ propsRes->DictionarySize += (UInt32)(propsData[1 + i]) << (i * 8);
+ if (propsRes->DictionarySize == 0)
+ propsRes->DictionarySize = 1;
+ }
+ #endif
+ return LZMA_RESULT_OK;
+}
+#endif
+
+#define kLzmaStreamWasFinishedId (-1)
+
+int LzmaDecode(CLzmaDecoderState *vs,
+ #ifdef _LZMA_IN_CB
+ ILzmaInCallback *InCallback,
+ #else
+ const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
+ #endif
+ unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed)
+{
+ CProb *p = vs->Probs;
+ SizeT nowPos = 0;
+ Byte previousByte = 0;
+ UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1;
+ UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1;
+ int lc = vs->Properties.lc;
+
+ #ifdef _LZMA_OUT_READ
+
+ UInt32 Range = vs->Range;
+ UInt32 Code = vs->Code;
+ #ifdef _LZMA_IN_CB
+ const Byte *Buffer = vs->Buffer;
+ const Byte *BufferLim = vs->BufferLim;
+ #else
+ const Byte *Buffer = inStream;
+ const Byte *BufferLim = inStream + inSize;
+ #endif
+ int state = vs->State;
+ UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
+ int len = vs->RemainLen;
+ UInt32 globalPos = vs->GlobalPos;
+ UInt32 distanceLimit = vs->DistanceLimit;
+
+ Byte *dictionary = vs->Dictionary;
+ UInt32 dictionarySize = vs->Properties.DictionarySize;
+ UInt32 dictionaryPos = vs->DictionaryPos;
+
+ Byte tempDictionary[4];
+
+ #ifndef _LZMA_IN_CB
+ *inSizeProcessed = 0;
+ #endif
+ *outSizeProcessed = 0;
+ if (len == kLzmaStreamWasFinishedId)
+ return LZMA_RESULT_OK;
+
+ if (dictionarySize == 0)
+ {
+ dictionary = tempDictionary;
+ dictionarySize = 1;
+ tempDictionary[0] = vs->TempDictionary[0];
+ }
+
+ if (len == kLzmaNeedInitId)
+ {
+ {
+ UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
+ UInt32 i;
+ for (i = 0; i < numProbs; i++)
+ p[i] = kBitModelTotal >> 1;
+ rep0 = rep1 = rep2 = rep3 = 1;
+ state = 0;
+ globalPos = 0;
+ distanceLimit = 0;
+ dictionaryPos = 0;
+ dictionary[dictionarySize - 1] = 0;
+ #ifdef _LZMA_IN_CB
+ RC_INIT;
+ #else
+ RC_INIT(inStream, inSize);
+ #endif
+ }
+ len = 0;
+ }
+ while(len != 0 && nowPos < outSize)
+ {
+ UInt32 pos = dictionaryPos - rep0;
+ if (pos >= dictionarySize)
+ pos += dictionarySize;
+ outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
+ if (++dictionaryPos == dictionarySize)
+ dictionaryPos = 0;
+ len--;
+ }
+ if (dictionaryPos == 0)
+ previousByte = dictionary[dictionarySize - 1];
+ else
+ previousByte = dictionary[dictionaryPos - 1];
+
+ #else /* if !_LZMA_OUT_READ */
+
+ int state = 0;
+ UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
+ int len = 0;
+ const Byte *Buffer;
+ const Byte *BufferLim;
+ UInt32 Range;
+ UInt32 Code;
+
+ #ifndef _LZMA_IN_CB
+ *inSizeProcessed = 0;
+ #endif
+ *outSizeProcessed = 0;
+
+ {
+ UInt32 i;
+ UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
+ for (i = 0; i < numProbs; i++)
+ p[i] = kBitModelTotal >> 1;
+ }
+
+ #ifdef _LZMA_IN_CB
+ RC_INIT;
+ #else
+ RC_INIT(inStream, inSize);
+ #endif
+
+ #endif /* _LZMA_OUT_READ */
+
+ while(nowPos < outSize)
+ {
+ CProb *prob;
+ UInt32 bound;
+ int posState = (int)(
+ (nowPos
+ #ifdef _LZMA_OUT_READ
+ + globalPos
+ #endif
+ )
+ & posStateMask);
+
+ prob = p + IsMatch + (state << kNumPosBitsMax) + posState;
+ IfBit0(prob)
+ {
+ int symbol = 1;
+ UpdateBit0(prob)
+ prob = p + Literal + (LZMA_LIT_SIZE *
+ (((
+ (nowPos
+ #ifdef _LZMA_OUT_READ
+ + globalPos
+ #endif
+ )
+ & literalPosMask) << lc) + (previousByte >> (8 - lc))));
+
+ if (state >= kNumLitStates)
+ {
+ int matchByte;
+ #ifdef _LZMA_OUT_READ
+ UInt32 pos = dictionaryPos - rep0;
+ if (pos >= dictionarySize)
+ pos += dictionarySize;
+ matchByte = dictionary[pos];
+ #else
+ matchByte = outStream[nowPos - rep0];
+ #endif
+ do
+ {
+ int bit;
+ CProb *probLit;
+ matchByte <<= 1;
+ bit = (matchByte & 0x100);
+ probLit = prob + 0x100 + bit + symbol;
+ RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break)
+ }
+ while (symbol < 0x100);
+ }
+ while (symbol < 0x100)
+ {
+ CProb *probLit = prob + symbol;
+ RC_GET_BIT(probLit, symbol)
+ }
+ previousByte = (Byte)symbol;
+
+ outStream[nowPos++] = previousByte;
+ #ifdef _LZMA_OUT_READ
+ if (distanceLimit < dictionarySize)
+ distanceLimit++;
+
+ dictionary[dictionaryPos] = previousByte;
+ if (++dictionaryPos == dictionarySize)
+ dictionaryPos = 0;
+ #endif
+ if (state < 4) state = 0;
+ else if (state < 10) state -= 3;
+ else state -= 6;
+ }
+ else
+ {
+ UpdateBit1(prob);
+ prob = p + IsRep + state;
+ IfBit0(prob)
+ {
+ UpdateBit0(prob);
+ rep3 = rep2;
+ rep2 = rep1;
+ rep1 = rep0;
+ state = state < kNumLitStates ? 0 : 3;
+ prob = p + LenCoder;
+ }
+ else
+ {
+ UpdateBit1(prob);
+ prob = p + IsRepG0 + state;
+ IfBit0(prob)
+ {
+ UpdateBit0(prob);
+ prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState;
+ IfBit0(prob)
+ {
+ #ifdef _LZMA_OUT_READ
+ UInt32 pos;
+ #endif
+ UpdateBit0(prob);
+
+ #ifdef _LZMA_OUT_READ
+ if (distanceLimit == 0)
+ #else
+ if (nowPos == 0)
+ #endif
+ return LZMA_RESULT_DATA_ERROR;
+
+ state = state < kNumLitStates ? 9 : 11;
+ #ifdef _LZMA_OUT_READ
+ pos = dictionaryPos - rep0;
+ if (pos >= dictionarySize)
+ pos += dictionarySize;
+ previousByte = dictionary[pos];
+ dictionary[dictionaryPos] = previousByte;
+ if (++dictionaryPos == dictionarySize)
+ dictionaryPos = 0;
+ #else
+ previousByte = outStream[nowPos - rep0];
+ #endif
+ outStream[nowPos++] = previousByte;
+ #ifdef _LZMA_OUT_READ
+ if (distanceLimit < dictionarySize)
+ distanceLimit++;
+ #endif
+
+ continue;
+ }
+ else
+ {
+ UpdateBit1(prob);
+ }
+ }
+ else
+ {
+ UInt32 distance;
+ UpdateBit1(prob);
+ prob = p + IsRepG1 + state;
+ IfBit0(prob)
+ {
+ UpdateBit0(prob);
+ distance = rep1;
+ }
+ else
+ {
+ UpdateBit1(prob);
+ prob = p + IsRepG2 + state;
+ IfBit0(prob)
+ {
+ UpdateBit0(prob);
+ distance = rep2;
+ }
+ else
+ {
+ UpdateBit1(prob);
+ distance = rep3;
+ rep3 = rep2;
+ }
+ rep2 = rep1;
+ }
+ rep1 = rep0;
+ rep0 = distance;
+ }
+ state = state < kNumLitStates ? 8 : 11;
+ prob = p + RepLenCoder;
+ }
+ {
+ int numBits, offset;
+ CProb *probLen = prob + LenChoice;
+ IfBit0(probLen)
+ {
+ UpdateBit0(probLen);
+ probLen = prob + LenLow + (posState << kLenNumLowBits);
+ offset = 0;
+ numBits = kLenNumLowBits;
+ }
+ else
+ {
+ UpdateBit1(probLen);
+ probLen = prob + LenChoice2;
+ IfBit0(probLen)
+ {
+ UpdateBit0(probLen);
+ probLen = prob + LenMid + (posState << kLenNumMidBits);
+ offset = kLenNumLowSymbols;
+ numBits = kLenNumMidBits;
+ }
+ else
+ {
+ UpdateBit1(probLen);
+ probLen = prob + LenHigh;
+ offset = kLenNumLowSymbols + kLenNumMidSymbols;
+ numBits = kLenNumHighBits;
+ }
+ }
+ RangeDecoderBitTreeDecode(probLen, numBits, len);
+ len += offset;
+ }
+
+ if (state < 4)
+ {
+ int posSlot;
+ state += kNumLitStates;
+ prob = p + PosSlot +
+ ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
+ kNumPosSlotBits);
+ RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot);
+ if (posSlot >= kStartPosModelIndex)
+ {
+ int numDirectBits = ((posSlot >> 1) - 1);
+ rep0 = (2 | ((UInt32)posSlot & 1));
+ if (posSlot < kEndPosModelIndex)
+ {
+ rep0 <<= numDirectBits;
+ prob = p + SpecPos + rep0 - posSlot - 1;
+ }
+ else
+ {
+ numDirectBits -= kNumAlignBits;
+ do
+ {
+ RC_NORMALIZE
+ Range >>= 1;
+ rep0 <<= 1;
+ if (Code >= Range)
+ {
+ Code -= Range;
+ rep0 |= 1;
+ }
+ }
+ while (--numDirectBits != 0);
+ prob = p + Align;
+ rep0 <<= kNumAlignBits;
+ numDirectBits = kNumAlignBits;
+ }
+ {
+ int i = 1;
+ int mi = 1;
+ do
+ {
+ CProb *prob3 = prob + mi;
+ RC_GET_BIT2(prob3, mi, ; , rep0 |= i);
+ i <<= 1;
+ }
+ while(--numDirectBits != 0);
+ }
+ }
+ else
+ rep0 = posSlot;
+ if (++rep0 == (UInt32)(0))
+ {
+ /* it's for stream version */
+ len = kLzmaStreamWasFinishedId;
+ break;
+ }
+ }
+
+ len += kMatchMinLen;
+ #ifdef _LZMA_OUT_READ
+ if (rep0 > distanceLimit)
+ #else
+ if (rep0 > nowPos)
+ #endif
+ return LZMA_RESULT_DATA_ERROR;
+
+ #ifdef _LZMA_OUT_READ
+ if (dictionarySize - distanceLimit > (UInt32)len)
+ distanceLimit += len;
+ else
+ distanceLimit = dictionarySize;
+ #endif
+
+ do
+ {
+ #ifdef _LZMA_OUT_READ
+ UInt32 pos = dictionaryPos - rep0;
+ if (pos >= dictionarySize)
+ pos += dictionarySize;
+ previousByte = dictionary[pos];
+ dictionary[dictionaryPos] = previousByte;
+ if (++dictionaryPos == dictionarySize)
+ dictionaryPos = 0;
+ #else
+ previousByte = outStream[nowPos - rep0];
+ #endif
+ len--;
+ outStream[nowPos++] = previousByte;
+ }
+ while(len != 0 && nowPos < outSize);
+ }
+ }
+ RC_NORMALIZE;
+
+ #ifdef _LZMA_OUT_READ
+ vs->Range = Range;
+ vs->Code = Code;
+ vs->DictionaryPos = dictionaryPos;
+ vs->GlobalPos = globalPos + (UInt32)nowPos;
+ vs->DistanceLimit = distanceLimit;
+ vs->Reps[0] = rep0;
+ vs->Reps[1] = rep1;
+ vs->Reps[2] = rep2;
+ vs->Reps[3] = rep3;
+ vs->State = state;
+ vs->RemainLen = len;
+ vs->TempDictionary[0] = tempDictionary[0];
+ #endif
+
+ #ifdef _LZMA_IN_CB
+ vs->Buffer = Buffer;
+ vs->BufferLim = BufferLim;
+ #else
+ *inSizeProcessed = (SizeT)(Buffer - inStream);
+ #endif
+ *outSizeProcessed = nowPos;
+ return LZMA_RESULT_OK;
+}
diff --git a/target/linux/adm8668/image/lzma-loader/src/LzmaDecode.h b/target/linux/adm8668/image/lzma-loader/src/LzmaDecode.h
new file mode 100644
index 0000000..abc02d7
--- /dev/null
+++ b/target/linux/adm8668/image/lzma-loader/src/LzmaDecode.h
@@ -0,0 +1,131 @@
+/*
+ LzmaDecode.h
+ LZMA Decoder interface
+
+ LZMA SDK 4.21 Copyright (c) 1999-2005 Igor Pavlov (2005-06-08)
+ http://www.7-zip.org/
+
+ LZMA SDK is licensed under two licenses:
+ 1) GNU Lesser General Public License (GNU LGPL)
+ 2) Common Public License (CPL)
+ It means that you can select one of these two licenses and
+ follow rules of that license.
+
+ SPECIAL EXCEPTION:
+ Igor Pavlov, as the author of this code, expressly permits you to
+ statically or dynamically link your code (or bind by name) to the
+ interfaces of this file without subjecting your linked code to the
+ terms of the CPL or GNU LGPL. Any modifications or additions
+ to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#ifndef __LZMADECODE_H
+#define __LZMADECODE_H
+
+/* #define _LZMA_IN_CB */
+/* Use callback for input data */
+
+/* #define _LZMA_OUT_READ */
+/* Use read function for output data */
+
+/* #define _LZMA_PROB32 */
+/* It can increase speed on some 32-bit CPUs,
+ but memory usage will be doubled in that case */
+
+/* #define _LZMA_LOC_OPT */
+/* Enable local speed optimizations inside code */
+
+/* #define _LZMA_SYSTEM_SIZE_T */
+/* Use system's size_t. You can use it to enable 64-bit sizes supporting*/
+
+#ifndef UInt32
+#ifdef _LZMA_UINT32_IS_ULONG
+#define UInt32 unsigned long
+#else
+#define UInt32 unsigned int
+#endif
+#endif
+
+#ifndef SizeT
+#ifdef _LZMA_SYSTEM_SIZE_T
+#include <stddef.h>
+#define SizeT size_t
+#else
+#define SizeT UInt32
+#endif
+#endif
+
+#ifdef _LZMA_PROB32
+#define CProb UInt32
+#else
+#define CProb unsigned short
+#endif
+
+#define LZMA_RESULT_OK 0
+#define LZMA_RESULT_DATA_ERROR 1
+
+#ifdef _LZMA_IN_CB
+typedef struct _ILzmaInCallback
+{
+ int (*Read)(void *object, const unsigned char **buffer, SizeT *bufferSize);
+} ILzmaInCallback;
+#endif
+
+#define LZMA_BASE_SIZE 1846
+#define LZMA_LIT_SIZE 768
+
+#define LZMA_PROPERTIES_SIZE 5
+
+typedef struct _CLzmaProperties
+{
+ int lc;
+ int lp;
+ int pb;
+ #ifdef _LZMA_OUT_READ
+ UInt32 DictionarySize;
+ #endif
+}CLzmaProperties;
+
+int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size);
+
+#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp)))
+
+#define kLzmaNeedInitId (-2)
+
+typedef struct _CLzmaDecoderState
+{
+ CLzmaProperties Properties;
+ CProb *Probs;
+
+ #ifdef _LZMA_IN_CB
+ const unsigned char *Buffer;
+ const unsigned char *BufferLim;
+ #endif
+
+ #ifdef _LZMA_OUT_READ
+ unsigned char *Dictionary;
+ UInt32 Range;
+ UInt32 Code;
+ UInt32 DictionaryPos;
+ UInt32 GlobalPos;
+ UInt32 DistanceLimit;
+ UInt32 Reps[4];
+ int State;
+ int RemainLen;
+ unsigned char TempDictionary[4];
+ #endif
+} CLzmaDecoderState;
+
+#ifdef _LZMA_OUT_READ
+#define LzmaDecoderInit(vs) { (vs)->RemainLen = kLzmaNeedInitId; }
+#endif
+
+int LzmaDecode(CLzmaDecoderState *vs,
+ #ifdef _LZMA_IN_CB
+ ILzmaInCallback *inCallback,
+ #else
+ const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
+ #endif
+ unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed);
+
+#endif
diff --git a/target/linux/adm8668/image/lzma-loader/src/Makefile b/target/linux/adm8668/image/lzma-loader/src/Makefile
new file mode 100644
index 0000000..c1be46f
--- /dev/null
+++ b/target/linux/adm8668/image/lzma-loader/src/Makefile
@@ -0,0 +1,47 @@
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+RAMSTART = 0x80000000
+RAMSIZE = 0x00800000 # 1MB
+LOADADDR = 0x80400000 # RAM start + 4M
+KERNEL_ENTRY = 0x80002000
+
+CROSS_COMPILE = mipsel-openwrt-linux-
+
+OBJCOPY:= $(CROSS_COMPILE)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S
+CFLAGS := -I./include -fno-builtin -Os -G 0 -ffunction-sections -mno-abicalls -fno-pic -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap -Wall -DRAMSTART=${RAMSTART} -DRAMSIZE=${RAMSIZE} -DKERNEL_ENTRY=${KERNEL_ENTRY}
+
+.c.o:
+ $(CC) $(CFLAGS) -c $< -o $*.o
+
+CC = $(CROSS_COMPILE)gcc
+LD = $(CROSS_COMPILE)ld
+OBJDUMP = $(CROSS_COMPILE)objdump
+
+O_FORMAT = $(shell $(OBJDUMP) -i | head -2 | grep elf32)
+
+# Drop some uninteresting sections in the kernel.
+# This is only relevant for ELF kernels but doesn't hurt a.out
+drop-sections = .reginfo .mdebug .comment
+strip-flags = $(addprefix --remove-section=,$(drop-sections))
+
+all : lzma.elf lzma.bin
+
+lzma.lds: lzma.lds.in
+ sed -e 's,@LOADADDR@,$(LOADADDR),g' $< >$@
+
+kernel.o: vmlinux.lzma lzma.lds
+ $(LD) -r -b binary --oformat $(O_FORMAT) -o $@ $<
+
+lzma.bin: lzma.elf
+ $(OBJCOPY) $< $@
+
+lzma.elf: decompress.o stubs.o LzmaDecode.o kernel.o lzma.lds
+ $(LD) -T lzma.lds -o $@ $^
+#-s ^
+
+clean:
+ rm -f *.o lzma.elf lzma.bin *.tmp *.lds
diff --git a/target/linux/adm8668/image/lzma-loader/src/decompress.c b/target/linux/adm8668/image/lzma-loader/src/decompress.c
new file mode 100644
index 0000000..f328058
--- /dev/null
+++ b/target/linux/adm8668/image/lzma-loader/src/decompress.c
@@ -0,0 +1,118 @@
+/*
+ * LZMA compressed kernel decompressor for bcm947xx boards
+ *
+ * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * Please note, this was code based on the bunzip2 decompressor code
+ * by Manuel Novoa III (mjn3@codepoet.org), although the only thing left
+ * is an idea and part of original vendor code
+ *
+ *
+ * 12-Mar-2005 Mineharu Takahara <mtakahar@yahoo.com>
+ * pass actual output size to decoder (stream mode
+ * compressed input is not a requirement anymore)
+ *
+ * 24-Apr-2005 Oleg I. Vdovikin
+ * reordered functions using lds script, removed forward decl
+ *
+ * ??-Nov-2005 Mike Baker
+ * reorder the script as an lzma wrapper; do not depend on flash access
+ */
+
+#include "LzmaDecode.h"
+#include <exports.h>
+
+#define KSEG0ADDR(addr) (0x80000000|addr)
+
+register volatile gd_t *gd asm ("k0");
+unsigned char *data;
+
+static __inline__ unsigned char get_byte()
+{
+ unsigned char *buffer;
+
+ buffer = data;
+ data++;
+
+ return *buffer;
+}
+
+/* This puts lzma workspace 128k below RAM end.
+ * That should be enough for both lzma and stack
+ */
+static char *buffer = (char *)(RAMSTART + RAMSIZE - 0x00020000);
+extern char _binary_vmlinux_lzma_start[];
+extern char _binary_vmlinux_lzma_end[];
+extern char lzma_start[];
+extern char lzma_end[];
+
+/* should be the first function */
+void entry(unsigned int arg0, unsigned int arg1,
+ unsigned int arg2, unsigned int arg3)
+{
+ unsigned int i; /* temp value */
+ unsigned int isize; /* compressed size */
+ unsigned int osize; /* uncompressed size */
+ int argc = arg0;
+ char **argv = (char **)arg1;
+ char **envp = (char **)arg2;
+
+ CLzmaDecoderState vs;
+
+ data = (unsigned char *)_binary_vmlinux_lzma_start;
+ isize = _binary_vmlinux_lzma_end - _binary_vmlinux_lzma_start + 1;
+
+ puts("\nLZMA kernel loader\n");
+
+ printf("lzma data @ %#x - %#x\n", _binary_vmlinux_lzma_start, _binary_vmlinux_lzma_end);
+ printf("load addr @ %#x\n\n", KERNEL_ENTRY);
+ printf("jump table @ %#x\n", gd->jt[3]);
+
+ /* lzma args */
+ i = get_byte();
+ vs.Properties.lc = i % 9, i = i / 9;
+ vs.Properties.lp = i % 5, vs.Properties.pb = i / 5;
+
+ vs.Probs = (CProb *)buffer;
+
+ /* skip rest of the LZMA coder property */
+ data += 4;
+
+ /* read the lower half of uncompressed size in the header */
+ osize = ((unsigned int)get_byte()) +
+ ((unsigned int)get_byte() << 8) +
+ ((unsigned int)get_byte() << 16) +
+ ((unsigned int)get_byte() << 24);
+
+ /* skip rest of the header (upper half of uncompressed size) */
+ data += 4;
+
+ /* decompress kernel */
+ puts("\nDecompressing kernel...");
+ if ((i = LzmaDecode(&vs,
+ (unsigned char*)data, isize, &isize,
+ (unsigned char*)KERNEL_ENTRY, osize, &osize)) == LZMA_RESULT_OK)
+ {
+ puts("success!\n");
+
+ /* Jump to load address */
+// ((void (*)(int a0, int a1, int a2, int a3))KERNEL_ENTRY)(0,0,0,0);
+ ((void (*)(int a0, int a1, int a2, int a3))KERNEL_ENTRY)(arg0, arg1, arg2, arg3);
+ }
+ puts("failure!\n");
+}
diff --git a/target/linux/adm8668/image/lzma-loader/src/include/_exports.h b/target/linux/adm8668/image/lzma-loader/src/include/_exports.h
new file mode 100644
index 0000000..61dcaaf
--- /dev/null
+++ b/target/linux/adm8668/image/lzma-loader/src/include/_exports.h
@@ -0,0 +1,18 @@
+EXPORT_FUNC(get_version)
+EXPORT_FUNC(getc)
+EXPORT_FUNC(tstc)
+EXPORT_FUNC(putc)
+EXPORT_FUNC(puts)
+EXPORT_FUNC(printf)
+EXPORT_FUNC(install_hdlr)
+EXPORT_FUNC(free_hdlr)
+EXPORT_FUNC(malloc)
+EXPORT_FUNC(free)
+EXPORT_FUNC(udelay)
+EXPORT_FUNC(get_timer)
+EXPORT_FUNC(vprintf)
+EXPORT_FUNC(do_reset)
+#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+EXPORT_FUNC(i2c_write)
+EXPORT_FUNC(i2c_read)
+#endif /* CFG_CMD_I2C */
diff --git a/target/linux/adm8668/image/lzma-loader/src/include/asm/global_data.h b/target/linux/adm8668/image/lzma-loader/src/include/asm/global_data.h
new file mode 100644
index 0000000..a024194
--- /dev/null
+++ b/target/linux/adm8668/image/lzma-loader/src/include/asm/global_data.h
@@ -0,0 +1,60 @@
+/*
+ * (C) Copyright 2002-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_GBL_DATA_H
+#define __ASM_GBL_DATA_H
+
+#include <asm/regdef.h>
+
+/*
+ * The following data structure is placed in some memory wich is
+ * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
+ * some locked parts of the data cache) to allow for a minimum set of
+ * global variables during system initialization (until we have set
+ * up the memory controller so that we can use RAM).
+ *
+ * Keep it *SMALL* and remember to set CFG_GBL_DATA_SIZE > sizeof(gd_t)
+ */
+
+typedef struct global_data {
+ bd_t *bd;
+ unsigned long flags;
+ unsigned long baudrate;
+ unsigned long have_console; /* serial_init() was called */
+ unsigned long ram_size; /* RAM size */
+ unsigned long reloc_off; /* Relocation Offset */
+ unsigned long env_addr; /* Address of Environment struct */
+ unsigned long env_valid; /* Checksum of Environment valid? */
+ void **jt; /* jump table */
+} gd_t;
+
+/*
+ * Global Data Flags
+ */
+#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
+#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
+#define GD_FLG_SILENT 0x00004 /* Silent mode */
+
+#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("k0")
+
+#endif /* __ASM_GBL_DATA_H */
diff --git a/target/linux/adm8668/image/lzma-loader/src/include/asm/u-boot.h b/target/linux/adm8668/image/lzma-loader/src/include/asm/u-boot.h
new file mode 100644
index 0000000..0de0b4d
--- /dev/null
+++ b/target/linux/adm8668/image/lzma-loader/src/include/asm/u-boot.h
@@ -0,0 +1,42 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _U_BOOT_H_
+#define _U_BOOT_H_ 1
+
+typedef struct bd_info {
+ int bi_baudrate; /* serial console baudrate */
+ unsigned long bi_ip_addr; /* IP Address */
+ unsigned char bi_enetaddr[6]; /* Ethernet adress */
+ unsigned long bi_arch_number; /* unique id for this board */
+ unsigned long bi_boot_params; /* where this board expects params */
+ unsigned long bi_memstart; /* start of DRAM memory */
+ unsigned long bi_memsize; /* size of DRAM memory in bytes */
+ unsigned long bi_flashstart; /* start of FLASH memory */
+ unsigned long bi_flashsize; /* size of FLASH memory */
+ unsigned long bi_flashoffset; /* reserved area for startup monitor */
+} bd_t;
+#define bi_env_data bi_env->data
+#define bi_env_crc bi_env->crc
+
+#endif /* _U_BOOT_H_ */
diff --git a/target/linux/adm8668/image/lzma-loader/src/include/common.h b/target/linux/adm8668/image/lzma-loader/src/include/common.h
new file mode 100644
index 0000000..5d957af
--- /dev/null
+++ b/target/linux/adm8668/image/lzma-loader/src/include/common.h
@@ -0,0 +1,48 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __COMMON_H_
+#define __COMMON_H_ 1
+
+#undef _LINUX_CONFIG_H
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+typedef unsigned char uchar;
+typedef volatile unsigned long vu_long;
+typedef volatile unsigned short vu_short;
+typedef volatile unsigned char vu_char;
+
+#include <inttypes.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <asm/ptrace.h>
+#include <stdarg.h>
+#include <image.h>
+
+typedef void (interrupt_handler_t)(void *);
+
+#include <asm/u-boot.h> /* boot information for Linux kernel */
+#include <asm/global_data.h> /* global data used for startup functions */
+
+
+#endif /* __COMMON_H_ */
diff --git a/target/linux/adm8668/image/lzma-loader/src/include/exports.h b/target/linux/adm8668/image/lzma-loader/src/include/exports.h
new file mode 100644
index 0000000..4cdc36e
--- /dev/null
+++ b/target/linux/adm8668/image/lzma-loader/src/include/exports.h
@@ -0,0 +1,38 @@
+#ifndef __EXPORTS_H__
+#define __EXPORTS_H__
+#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
+#ifndef __ASSEMBLY__
+
+#include <common.h>
+
+/* These are declarations of exported functions available in C code */
+unsigned long get_version(void);
+int getc(void);
+int tstc(void);
+void putc(const char);
+void puts(const char*);
+void printf(const char* fmt, ...);
+void install_hdlr(int, interrupt_handler_t*, void*);
+void free_hdlr(int);
+void *malloc(size_t);
+void free(void*);
+void udelay(unsigned long);
+unsigned long get_timer(unsigned long);
+void vprintf(const char *, va_list);
+void do_reset (void);
+
+void app_startup(char **);
+
+#endif /* ifndef __ASSEMBLY__ */
+
+enum {
+#define EXPORT_FUNC(x) XF_ ## x ,
+#include <_exports.h>
+#undef EXPORT_FUNC
+
+ XF_MAX
+};
+
+#define XF_VERSION 2
+
+#endif /* __EXPORTS_H__ */
diff --git a/target/linux/adm8668/image/lzma-loader/src/include/image.h b/target/linux/adm8668/image/lzma-loader/src/include/image.h
new file mode 100644
index 0000000..69c73b7
--- /dev/null
+++ b/target/linux/adm8668/image/lzma-loader/src/include/image.h
@@ -0,0 +1,157 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __IMAGE_H__
+#define __IMAGE_H__
+
+/*
+ * Operating System Codes
+ */
+#define IH_OS_INVALID 0 /* Invalid OS */
+#define IH_OS_OPENBSD 1 /* OpenBSD */
+#define IH_OS_NETBSD 2 /* NetBSD */
+#define IH_OS_FREEBSD 3 /* FreeBSD */
+#define IH_OS_4_4BSD 4 /* 4.4BSD */
+#define IH_OS_LINUX 5 /* Linux */
+#define IH_OS_SVR4 6 /* SVR4 */
+#define IH_OS_ESIX 7 /* Esix */
+#define IH_OS_SOLARIS 8 /* Solaris */
+#define IH_OS_IRIX 9 /* Irix */
+#define IH_OS_SCO 10 /* SCO */
+#define IH_OS_DELL 11 /* Dell */
+#define IH_OS_NCR 12 /* NCR */
+#define IH_OS_LYNXOS 13 /* LynxOS */
+#define IH_OS_VXWORKS 14 /* VxWorks */
+#define IH_OS_PSOS 15 /* pSOS */
+#define IH_OS_QNX 16 /* QNX */
+#define IH_OS_U_BOOT 17 /* Firmware */
+#define IH_OS_RTEMS 18 /* RTEMS */
+#define IH_OS_ARTOS 19 /* ARTOS */
+#define IH_OS_UNITY 20 /* Unity OS */
+
+/*
+ * CPU Architecture Codes (supported by Linux)
+ */
+#define IH_CPU_INVALID 0 /* Invalid CPU */
+#define IH_CPU_ALPHA 1 /* Alpha */
+#define IH_CPU_ARM 2 /* ARM */
+#define IH_CPU_I386 3 /* Intel x86 */
+#define IH_CPU_IA64 4 /* IA64 */
+#define IH_CPU_MIPS 5 /* MIPS */
+#define IH_CPU_MIPS64 6 /* MIPS 64 Bit */
+#define IH_CPU_PPC 7 /* PowerPC */
+#define IH_CPU_S390 8 /* IBM S390 */
+#define IH_CPU_SH 9 /* SuperH */
+#define IH_CPU_SPARC 10 /* Sparc */
+#define IH_CPU_SPARC64 11 /* Sparc 64 Bit */
+#define IH_CPU_M68K 12 /* M68K */
+#define IH_CPU_NIOS 13 /* Nios-32 */
+#define IH_CPU_MICROBLAZE 14 /* MicroBlaze */
+#define IH_CPU_NIOS2 15 /* Nios-II */
+
+/*
+ * Image Types
+ *
+ * "Standalone Programs" are directly runnable in the environment
+ * provided by U-Boot; it is expected that (if they behave
+ * well) you can continue to work in U-Boot after return from
+ * the Standalone Program.
+ * "OS Kernel Images" are usually images of some Embedded OS which
+ * will take over control completely. Usually these programs
+ * will install their own set of exception handlers, device
+ * drivers, set up the MMU, etc. - this means, that you cannot
+ * expect to re-enter U-Boot except by resetting the CPU.
+ * "RAMDisk Images" are more or less just data blocks, and their
+ * parameters (address, size) are passed to an OS kernel that is
+ * being started.
+ * "Multi-File Images" contain several images, typically an OS
+ * (Linux) kernel image and one or more data images like
+ * RAMDisks. This construct is useful for instance when you want
+ * to boot over the network using BOOTP etc., where the boot
+ * server provides just a single image file, but you want to get
+ * for instance an OS kernel and a RAMDisk image.
+ *
+ * "Multi-File Images" start with a list of image sizes, each
+ * image size (in bytes) specified by an "uint32_t" in network
+ * byte order. This list is terminated by an "(uint32_t)0".
+ * Immediately after the terminating 0 follow the images, one by
+ * one, all aligned on "uint32_t" boundaries (size rounded up to
+ * a multiple of 4 bytes - except for the last file).
+ *
+ * "Firmware Images" are binary images containing firmware (like
+ * U-Boot or FPGA images) which usually will be programmed to
+ * flash memory.
+ *
+ * "Script files" are command sequences that will be executed by
+ * U-Boot's command interpreter; this feature is especially
+ * useful when you configure U-Boot to use a real shell (hush)
+ * as command interpreter (=> Shell Scripts).
+ */
+
+#define IH_TYPE_INVALID 0 /* Invalid Image */
+#define IH_TYPE_STANDALONE 1 /* Standalone Program */
+#define IH_TYPE_KERNEL 2 /* OS Kernel Image */
+#define IH_TYPE_RAMDISK 3 /* RAMDisk Image */
+#define IH_TYPE_MULTI 4 /* Multi-File Image */
+#define IH_TYPE_FIRMWARE 5 /* Firmware Image */
+#define IH_TYPE_SCRIPT 6 /* Script file */
+#define IH_TYPE_FILESYSTEM 7 /* Filesystem Image (any type) */
+
+/*
+ * Compression Types
+ */
+#define IH_COMP_NONE 0 /* No Compression Used */
+#define IH_COMP_GZIP 1 /* gzip Compression Used */
+#define IH_COMP_BZIP2 2 /* bzip2 Compression Used */
+
+#define IH_MAGIC 0x27051956 /* Image Magic Number */
+#define IH_NMLEN 32 /* Image Name Length */
+
+#define IH_NAMEMAGIC 0x86680001 /* Name Magic Number */
+#define IH_SIZEMAX 5800000 /* Max image size */
+/*
+ * all data in network byte order (aka natural aka bigendian)
+ */
+
+typedef struct image_header {
+ uint32_t ih_magic; /* Image Header Magic Number */
+ uint32_t ih_hcrc; /* Image Header CRC Checksum */
+ uint32_t ih_time; /* Image Creation Timestamp */
+ uint32_t ih_size; /* Image Data Size */
+ uint32_t ih_load; /* Data Load Address */
+ uint32_t ih_ep; /* Entry Point Address */
+ uint32_t ih_dcrc; /* Image Data CRC Checksum */
+ uint8_t ih_os; /* Operating System */
+ uint8_t ih_arch; /* CPU architecture */
+ uint8_t ih_type; /* Image Type */
+ uint8_t ih_comp; /* Compression Type */
+#ifdef NEW_IMAGE_HEADER
+ uint32_t ih_namemagic; /* image name CRC */
+ uint8_t ih_name[IH_NMLEN-4]; /* image name */
+#else
+ uint8_t ih_name[IH_NMLEN]; /* Image Name */
+#endif
+} image_header_t;
+
+
+#endif /* __IMAGE_H__ */
diff --git a/target/linux/adm8668/image/lzma-loader/src/lzma.lds.in b/target/linux/adm8668/image/lzma-loader/src/lzma.lds.in
new file mode 100644
index 0000000..d6c60ca
--- /dev/null
+++ b/target/linux/adm8668/image/lzma-loader/src/lzma.lds.in
@@ -0,0 +1,24 @@
+OUTPUT_ARCH(mips)
+ENTRY(entry)
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = @LOADADDR@;
+ .text :
+ {
+ _ftext = . ;
+ *(.text.entry)
+ *(.text)
+ lzma_start = .;
+ kernel.o
+ lzma_end = .;
+ *(.rodata)
+ } =0
+
+ .reginfo : { *(.reginfo) }
+
+ .bss :
+ {
+ *(.bss)
+ }
+}
diff --git a/target/linux/adm8668/image/lzma-loader/src/stubs.c b/target/linux/adm8668/image/lzma-loader/src/stubs.c
new file mode 100644
index 0000000..468e5a1
--- /dev/null
+++ b/target/linux/adm8668/image/lzma-loader/src/stubs.c
@@ -0,0 +1,52 @@
+#include <exports.h>
+
+#ifndef GCC_VERSION
+#define GCC_VERSION (__GNUC__ * 1000 + __GNUC_MINOR__)
+#endif /* GCC_VERSION */
+
+/*
+ * k0 ($26) holds the pointer to the global_data; t9 ($25) is a call-
+ * clobbered register that is also used to set gp ($26). Note that the
+ * jr instruction also executes the instruction immediately following
+ * it; however, GCC/mips generates an additional `nop' after each asm
+ * statement
+ */
+#define EXPORT_FUNC(x) \
+ asm volatile ( \
+" .globl " #x "\n" \
+#x ":\n" \
+" lw $25, %0($26)\n" \
+" lw $25, %1($25)\n" \
+" jr $25\n" \
+ : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "t9");
+
+/* This function is necessary to prevent the compiler from
+ * generating prologue/epilogue, preparing stack frame etc.
+ * The stub functions are special, they do not use the stack
+ * frame passed to them, but pass it intact to the actual
+ * implementation. On the other hand, asm() statements with
+ * arguments can be used only inside the functions (gcc limitation)
+ */
+#if GCC_VERSION < 3004
+static
+#endif /* GCC_VERSION */
+void __attribute__((unused)) dummy(void)
+{
+#include <_exports.h>
+}
+
+#if 0
+extern unsigned long __bss_start, _end;
+
+void app_startup(char **argv)
+{
+ unsigned long * cp = &__bss_start;
+
+ /* Zero out BSS */
+ while (cp < &_end) {
+ *cp++ = 0;
+ }
+}
+#endif
+
+#undef EXPORT_FUNC
diff --git a/target/linux/adm8668/image/my-mkimage b/target/linux/adm8668/image/my-mkimage
new file mode 100755
index 0000000..7012d7b
--- /dev/null
+++ b/target/linux/adm8668/image/my-mkimage
@@ -0,0 +1,26 @@
+#!/bin/sh
+# my-mkimage
+# This will just pad the kernel partition to 64k boundary, then add rootfs.
+# but we have to be fancy because u-boot mkimage is going to add 64 byte header.
+#
+# Copyright (C) 2010 Scott Nicholas <neutronscott@scottn.us>
+
+PATH_LOADER=$1
+PATH_ROOTFS=$2
+OUTPUT=$3
+
+# todo - check arguments...? nah...
+if [ -x $OUTPUT ]; then
+ echo usage: $0 loader.bin root.squashfs output.bin
+ exit
+fi
+
+OLDSIZE=$(stat -c%s $PATH_LOADER)
+NEWSIZE=$(((OLDSIZE / 65536 + 1) * 65536 - 64))
+
+dd if=$PATH_LOADER of=vmlinuz.tmp bs=$NEWSIZE conv=sync
+cat $PATH_ROOTFS >>vmlinuz.tmp
+../../../../staging_dir/host/bin/mkimage -A mips -O linux -T kernel -C none -a 0x400000 -e 0x400000 -n "ADM8668 Linux Kernel(2.4.31)" -d vmlinuz.tmp $OUTPUT
+rm vmlinuz.tmp
+
+printf '\n\nOk done, now your squashfs starts on an erase boundary of %x :)\n\n' $((NEWSIZE+64))
diff --git a/target/linux/adm8668/patches-2.6.36/001-adm8668_arch.patch b/target/linux/adm8668/patches-2.6.36/001-adm8668_arch.patch
new file mode 100644
index 0000000..81cac43
--- /dev/null
+++ b/target/linux/adm8668/patches-2.6.36/001-adm8668_arch.patch
@@ -0,0 +1,37 @@
+--- a/arch/mips/Kbuild.platforms 2010-10-20 16:30:22.000000000 -0400
++++ b/arch/mips/Kbuild.platforms 2010-10-22 08:42:06.228968083 -0400
+@@ -27,6 +27,7 @@
+ platforms += txx9
+ platforms += vr41xx
+ platforms += wrppmc
++platforms += adm8668
+
+ # include the platform specific files
+ include $(patsubst %, $(srctree)/arch/mips/%/Platform, $(platforms))
+--- a/arch/mips/Kconfig 2010-10-20 16:30:22.000000000 -0400
++++ b/arch/mips/Kconfig 2010-10-22 08:37:31.016965108 -0400
+@@ -82,6 +82,24 @@
+ help
+ Support for BCM47XX based boards
+
++config ADM8668
++ bool "WildPass ADM8668"
++ select SYS_HAS_CPU_MIPS32_R1
++ select IRQ_CPU
++ select CEVT_R4K
++ select CSRC_R4K
++ select HW_HAS_PCI
++ select PCI
++ select SYS_SUPPORTS_LITTLE_ENDIAN
++ select SYS_SUPPORTS_32BIT_KERNEL
++ select DMA_NONCOHERENT
++ select SWAP_IO_SPACE
++ select SERIAL_ADM8668
++ select SERIAL_ADM8668_CONSOLE
++ help
++ ADM8668 board support by neutronscott
++ Scott Nicholas <neutronscott@scottn.us>
++
+ config BCM63XX
+ bool "Broadcom BCM63XX based boards"
+ select CEVT_R4K
diff --git a/target/linux/adm8668/patches-2.6.36/002-adm8668_uart.patch b/target/linux/adm8668/patches-2.6.36/002-adm8668_uart.patch
new file mode 100644
index 0000000..44fcd29
--- /dev/null
+++ b/target/linux/adm8668/patches-2.6.36/002-adm8668_uart.patch
@@ -0,0 +1,41 @@
+--- a/drivers/serial/Kconfig
++++ b/drivers/serial/Kconfig
+@@ -1510,6 +1510,25 @@
+ If you have enabled the serial port on the bcm63xx CPU
+ you can make it the console by answering Y to this option.
+
++config SERIAL_ADM8668
++ tristate "ADM8668 serial port support"
++ select SERIAL_CORE
++ depends on ADM8668
++ help
++ If you have an adm8668 CPU, you can enable its onboard
++ serial port by enabling this options.
++
++ To compile this driver as a module, choose M here: the
++ module will be called adm8668_uart.
++
++config SERIAL_ADM8668_CONSOLE
++ bool "Console on adm8668 serial port"
++ depends on SERIAL_ADM8668=y
++ select SERIAL_CORE_CONSOLE
++ help
++ If you have enabled the serial port on the adm8668 CPU
++ you can make it the console by answering Y to this option.
++
+ config SERIAL_GRLIB_GAISLER_APBUART
+ tristate "GRLIB APBUART serial support"
+ depends on OF
+--- a/include/linux/serial_core.h
++++ b/include/linux/serial_core.h
+@@ -196,6 +196,9 @@
+ /* High Speed UART for Medfield */
+ #define PORT_MFD 95
+
++/* ADM8668 UART */
++#define PORT_ADM8668 93
++
+ #ifdef __KERNEL__
+
+ #include <linux/compiler.h>
+
diff --git a/target/linux/adm8668/patches-2.6.36/003-adm8668_nor_map.patch b/target/linux/adm8668/patches-2.6.36/003-adm8668_nor_map.patch
new file mode 100644
index 0000000..59fba58
--- /dev/null
+++ b/target/linux/adm8668/patches-2.6.36/003-adm8668_nor_map.patch
@@ -0,0 +1,25 @@
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -103,6 +103,12 @@
+ default "0x02000000"
+ depends on MSP_FLASH_MAP_LIMIT_32M
+
++config MTD_ADM8668_NOR
++ tristate "ADM8668 NOR mapping"
++ depends on ADM8668 && MTD_CFI
++ help
++ mapping driver for ADM8668 NOR
++
+ config MTD_SUN_UFLASH
+ tristate "Sun Microsystems userflash support"
+ depends on SPARC && MTD_CFI && PCI
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -7,6 +7,7 @@
+ endif
+
+ # Chip mappings
++obj-$(CONFIG_MTD_ADM8668_NOR) += adm8668.o
+ obj-$(CONFIG_MTD_CDB89712) += cdb89712.o
+ obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
+ obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o