diff options
Diffstat (limited to 'target')
4 files changed, 4338 insertions, 0 deletions
diff --git a/target/linux/generic-2.6/patches-2.6.27/978-ssb_update.patch b/target/linux/generic-2.6/patches-2.6.27/978-ssb_update.patch new file mode 100644 index 0000000..ae3b50b --- /dev/null +++ b/target/linux/generic-2.6/patches-2.6.27/978-ssb_update.patch @@ -0,0 +1,1863 @@ +--- a/drivers/ssb/Kconfig ++++ b/drivers/ssb/Kconfig +@@ -1,10 +1,11 @@ +-menu "Sonics Silicon Backplane" +- + config SSB_POSSIBLE + bool + depends on HAS_IOMEM && HAS_DMA + default y + ++menu "Sonics Silicon Backplane" ++ depends on SSB_POSSIBLE ++ + config SSB + tristate "Sonics Silicon Backplane support" + depends on SSB_POSSIBLE +@@ -52,11 +53,11 @@ config SSB_B43_PCI_BRIDGE + + config SSB_PCMCIAHOST_POSSIBLE + bool +- depends on SSB && (PCMCIA = y || PCMCIA = SSB) && EXPERIMENTAL ++ depends on SSB && (PCMCIA = y || PCMCIA = SSB) + default y + + config SSB_PCMCIAHOST +- bool "Support for SSB on PCMCIA-bus host (EXPERIMENTAL)" ++ bool "Support for SSB on PCMCIA-bus host" + depends on SSB_PCMCIAHOST_POSSIBLE + select SSB_SPROM + help +@@ -106,14 +107,14 @@ config SSB_DRIVER_PCICORE + If unsure, say Y + + config SSB_PCICORE_HOSTMODE +- bool "Hostmode support for SSB PCI core (EXPERIMENTAL)" +- depends on SSB_DRIVER_PCICORE && SSB_DRIVER_MIPS && EXPERIMENTAL ++ bool "Hostmode support for SSB PCI core" ++ depends on SSB_DRIVER_PCICORE && SSB_DRIVER_MIPS + help + PCIcore hostmode operation (external PCI bus). + + config SSB_DRIVER_MIPS +- bool "SSB Broadcom MIPS core driver (EXPERIMENTAL)" +- depends on SSB && MIPS && EXPERIMENTAL ++ bool "SSB Broadcom MIPS core driver" ++ depends on SSB && MIPS + select SSB_SERIAL + help + Driver for the Sonics Silicon Backplane attached +@@ -125,11 +126,13 @@ config SSB_DRIVER_MIPS + config SSB_EMBEDDED + bool + depends on SSB_DRIVER_MIPS ++ select USB_EHCI_HCD_SSB if USB_EHCI_HCD ++ select USB_OHCI_HCD_SSB if USB_OHCI_HCD + default y + + config SSB_DRIVER_EXTIF +- bool "SSB Broadcom EXTIF core driver (EXPERIMENTAL)" +- depends on SSB_DRIVER_MIPS && EXPERIMENTAL ++ bool "SSB Broadcom EXTIF core driver" ++ depends on SSB_DRIVER_MIPS + help + Driver for the Sonics Silicon Backplane attached + Broadcom EXTIF core. +--- a/drivers/ssb/Makefile ++++ b/drivers/ssb/Makefile +@@ -9,6 +9,7 @@ ssb-$(CONFIG_SSB_PCMCIAHOST) += pcmcia. + + # built-in drivers + ssb-y += driver_chipcommon.o ++ssb-y += driver_chipcommon_pmu.o + ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o + ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o + ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o +--- a/drivers/ssb/b43_pci_bridge.c ++++ b/drivers/ssb/b43_pci_bridge.c +@@ -18,9 +18,11 @@ + + static const struct pci_device_id b43_pci_bridge_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4301) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4306) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4307) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4311) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4312) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4315) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4318) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) }, +@@ -29,6 +31,7 @@ static const struct pci_device_id b43_pc + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4325) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4328) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4329) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x432b) }, + { 0, }, + }; + MODULE_DEVICE_TABLE(pci, b43_pci_bridge_tbl); +--- a/drivers/ssb/driver_chipcommon.c ++++ b/drivers/ssb/driver_chipcommon.c +@@ -26,19 +26,6 @@ enum ssb_clksrc { + }; + + +-static inline u32 chipco_read32(struct ssb_chipcommon *cc, +- u16 offset) +-{ +- return ssb_read32(cc->dev, offset); +-} +- +-static inline void chipco_write32(struct ssb_chipcommon *cc, +- u16 offset, +- u32 value) +-{ +- ssb_write32(cc->dev, offset, value); +-} +- + static inline u32 chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset, + u32 mask, u32 value) + { +--- a/drivers/ssb/main.c ++++ b/drivers/ssb/main.c +@@ -473,6 +473,8 @@ static int ssb_devices_register(struct s + case SSB_BUSTYPE_SSB: + dev->dma_mask = &dev->coherent_dma_mask; + break; ++ default: ++ break; + } + + sdev->dev = dev; +@@ -1359,8 +1361,10 @@ static int __init ssb_modinit(void) + ssb_buses_lock(); + err = ssb_attach_queued_buses(); + ssb_buses_unlock(); +- if (err) ++ if (err) { + bus_unregister(&ssb_bustype); ++ goto out; ++ } + + err = b43_pci_ssb_bridge_init(); + if (err) { +@@ -1376,7 +1380,7 @@ static int __init ssb_modinit(void) + /* don't fail SSB init because of this */ + err = 0; + } +- ++out: + return err; + } + /* ssb must be initialized after PCI but before the ssb drivers. +--- a/drivers/ssb/pci.c ++++ b/drivers/ssb/pci.c +@@ -169,8 +169,14 @@ err_pci: + /* Get the word-offset for a SSB_SPROM_XXX define. */ + #define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16)) + /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */ +-#define SPEX(_outvar, _offset, _mask, _shift) \ ++#define SPEX16(_outvar, _offset, _mask, _shift) \ + out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift)) ++#define SPEX32(_outvar, _offset, _mask, _shift) \ ++ out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \ ++ in[SPOFF(_offset)]) & (_mask)) >> (_shift)) ++#define SPEX(_outvar, _offset, _mask, _shift) \ ++ SPEX16(_outvar, _offset, _mask, _shift) ++ + + static inline u8 ssb_crc8(u8 crc, u8 data) + { +@@ -327,11 +333,9 @@ static void sprom_extract_r123(struct ss + s8 gain; + u16 loc[3]; + +- if (out->revision == 3) { /* rev 3 moved MAC */ ++ if (out->revision == 3) /* rev 3 moved MAC */ + loc[0] = SSB_SPROM3_IL0MAC; +- loc[1] = SSB_SPROM3_ET0MAC; +- loc[2] = SSB_SPROM3_ET1MAC; +- } else { ++ else { + loc[0] = SSB_SPROM1_IL0MAC; + loc[1] = SSB_SPROM1_ET0MAC; + loc[2] = SSB_SPROM1_ET1MAC; +@@ -340,13 +344,15 @@ static void sprom_extract_r123(struct ss + v = in[SPOFF(loc[0]) + i]; + *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); + } +- for (i = 0; i < 3; i++) { +- v = in[SPOFF(loc[1]) + i]; +- *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v); +- } +- for (i = 0; i < 3; i++) { +- v = in[SPOFF(loc[2]) + i]; +- *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v); ++ if (out->revision < 3) { /* only rev 1-2 have et0, et1 */ ++ for (i = 0; i < 3; i++) { ++ v = in[SPOFF(loc[1]) + i]; ++ *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v); ++ } ++ for (i = 0; i < 3; i++) { ++ v = in[SPOFF(loc[2]) + i]; ++ *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v); ++ } + } + SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0); + SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A, +@@ -399,30 +405,33 @@ static void sprom_extract_r123(struct ss + out->antenna_gain.ghz5.a3 = gain; + } + +-static void sprom_extract_r4(struct ssb_sprom *out, const u16 *in) ++static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in) + { + int i; + u16 v; ++ u16 il0mac_offset; + +- /* extract the equivalent of the r1 variables */ ++ if (out->revision == 4) ++ il0mac_offset = SSB_SPROM4_IL0MAC; ++ else ++ il0mac_offset = SSB_SPROM5_IL0MAC; ++ /* extract the MAC address */ + for (i = 0; i < 3; i++) { +- v = in[SPOFF(SSB_SPROM4_IL0MAC) + i]; ++ v = in[SPOFF(il0mac_offset) + i]; + *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); + } +- for (i = 0; i < 3; i++) { +- v = in[SPOFF(SSB_SPROM4_ET0MAC) + i]; +- *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v); +- } +- for (i = 0; i < 3; i++) { +- v = in[SPOFF(SSB_SPROM4_ET1MAC) + i]; +- *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v); +- } + SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0); + SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A, + SSB_SPROM4_ETHPHY_ET1A_SHIFT); +- SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0); +- SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0); +- SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0); ++ if (out->revision == 4) { ++ SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0); ++ SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0); ++ SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0); ++ } else { ++ SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0); ++ SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0); ++ SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0); ++ } + SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A, + SSB_SPROM4_ANTAVAIL_A_SHIFT); + SPEX(ant_available_bg, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_BG, +@@ -433,12 +442,21 @@ static void sprom_extract_r4(struct ssb_ + SPEX(maxpwr_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_MAXP_A_MASK, 0); + SPEX(itssi_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_ITSSI_A, + SSB_SPROM4_ITSSI_A_SHIFT); +- SPEX(gpio0, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P0, 0); +- SPEX(gpio1, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P1, +- SSB_SPROM4_GPIOA_P1_SHIFT); +- SPEX(gpio2, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P2, 0); +- SPEX(gpio3, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P3, +- SSB_SPROM4_GPIOB_P3_SHIFT); ++ if (out->revision == 4) { ++ SPEX(gpio0, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P0, 0); ++ SPEX(gpio1, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P1, ++ SSB_SPROM4_GPIOA_P1_SHIFT); ++ SPEX(gpio2, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P2, 0); ++ SPEX(gpio3, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P3, ++ SSB_SPROM4_GPIOB_P3_SHIFT); ++ } else { ++ SPEX(gpio0, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P0, 0); ++ SPEX(gpio1, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P1, ++ SSB_SPROM5_GPIOA_P1_SHIFT); ++ SPEX(gpio2, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P2, 0); ++ SPEX(gpio3, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P3, ++ SSB_SPROM5_GPIOB_P3_SHIFT); ++ } + + /* Extract the antenna gain values. */ + SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01, +@@ -455,6 +473,96 @@ static void sprom_extract_r4(struct ssb_ + /* TODO - get remaining rev 4 stuff needed */ + } + ++static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) ++{ ++ int i; ++ u16 v; ++ ++ /* extract the MAC address */ ++ for (i = 0; i < 3; i++) { ++ v = in[SPOFF(SSB_SPROM8_IL0MAC) + i]; ++ *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); ++ } ++ SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0); ++ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0); ++ SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0); ++ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0); ++ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0); ++ SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A, ++ SSB_SPROM8_ANTAVAIL_A_SHIFT); ++ SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG, ++ SSB_SPROM8_ANTAVAIL_BG_SHIFT); ++ SPEX(maxpwr_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_MAXP_BG_MASK, 0); ++ SPEX(itssi_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_ITSSI_BG, ++ SSB_SPROM8_ITSSI_BG_SHIFT); ++ SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0); ++ SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A, ++ SSB_SPROM8_ITSSI_A_SHIFT); ++ SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0); ++ SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK, ++ SSB_SPROM8_MAXP_AL_SHIFT); ++ SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0); ++ SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1, ++ SSB_SPROM8_GPIOA_P1_SHIFT); ++ SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0); ++ SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3, ++ SSB_SPROM8_GPIOB_P3_SHIFT); ++ SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0); ++ SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G, ++ SSB_SPROM8_TRI5G_SHIFT); ++ SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0); ++ SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH, ++ SSB_SPROM8_TRI5GH_SHIFT); ++ SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0); ++ SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G, ++ SSB_SPROM8_RXPO5G_SHIFT); ++ SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0); ++ SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G, ++ SSB_SPROM8_RSSISMC2G_SHIFT); ++ SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G, ++ SSB_SPROM8_RSSISAV2G_SHIFT); ++ SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G, ++ SSB_SPROM8_BXA2G_SHIFT); ++ SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0); ++ SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G, ++ SSB_SPROM8_RSSISMC5G_SHIFT); ++ SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G, ++ SSB_SPROM8_RSSISAV5G_SHIFT); ++ SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G, ++ SSB_SPROM8_BXA5G_SHIFT); ++ SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0); ++ SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0); ++ SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0); ++ SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0); ++ SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0); ++ SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0); ++ SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0); ++ SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0); ++ SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0); ++ SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0); ++ SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0); ++ SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0); ++ SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0); ++ SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0); ++ SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0); ++ SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0); ++ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); ++ ++ /* Extract the antenna gain values. */ ++ SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, ++ SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT); ++ SPEX(antenna_gain.ghz24.a1, SSB_SPROM8_AGAIN01, ++ SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT); ++ SPEX(antenna_gain.ghz24.a2, SSB_SPROM8_AGAIN23, ++ SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT); ++ SPEX(antenna_gain.ghz24.a3, SSB_SPROM8_AGAIN23, ++ SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); ++ memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, ++ sizeof(out->antenna_gain.ghz5)); ++ ++ /* TODO - get remaining rev 8 stuff needed */ ++} ++ + static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out, + const u16 *in, u16 size) + { +@@ -462,6 +570,8 @@ static int sprom_extract(struct ssb_bus + + out->revision = in[size - 1] & 0x00FF; + ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); ++ memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ ++ memset(out->et1mac, 0xFF, 6); + if ((bus->chip_id & 0xFF00) == 0x4400) { + /* Workaround: The BCM44XX chip has a stupid revision + * number stored in the SPROM. +@@ -471,17 +581,28 @@ static int sprom_extract(struct ssb_bus + } else if (bus->chip_id == 0x4321) { + /* the BCM4328 has a chipid == 0x4321 and a rev 4 SPROM */ + out->revision = 4; +- sprom_extract_r4(out, in); ++ sprom_extract_r45(out, in); + } else { +- if (out->revision == 0) +- goto unsupported; +- if (out->revision >= 1 && out->revision <= 3) { ++ switch (out->revision) { ++ case 1: ++ case 2: ++ case 3: ++ sprom_extract_r123(out, in); ++ break; ++ case 4: ++ case 5: ++ sprom_extract_r45(out, in); ++ break; ++ case 8: ++ sprom_extract_r8(out, in); ++ break; ++ default: ++ ssb_printk(KERN_WARNING PFX "Unsupported SPROM" ++ " revision %d detected. Will extract" ++ " v1\n", out->revision); ++ out->revision = 1; + sprom_extract_r123(out, in); + } +- if (out->revision == 4) +- sprom_extract_r4(out, in); +- if (out->revision >= 5) +- goto unsupported; + } + + if (out->boardflags_lo == 0xFFFF) +@@ -490,11 +611,6 @@ static int sprom_extract(struct ssb_bus + out->boardflags_hi = 0; /* per specs */ + + return 0; +-unsupported: +- ssb_printk(KERN_WARNING PFX "Unsupported SPROM revision %d " +- "detected. Will extract v1\n", out->revision); +- sprom_extract_r123(out, in); +- return 0; + } + + static int ssb_pci_sprom_get(struct ssb_bus *bus, +--- a/drivers/ssb/pcmcia.c ++++ b/drivers/ssb/pcmcia.c +@@ -80,7 +80,7 @@ static int ssb_pcmcia_cfg_write(struct s + reg.Action = CS_WRITE; + reg.Value = value; + res = pcmcia_access_configuration_register(bus->host_pcmcia, ®); +- if (unlikely(res != CS_SUCCESS)) ++ if (unlikely(res != 0)) + return -EBUSY; + + return 0; +@@ -96,7 +96,7 @@ static int ssb_pcmcia_cfg_read(struct ss + reg.Offset = offset; + reg.Action = CS_READ; + res = pcmcia_access_configuration_register(bus->host_pcmcia, ®); +- if (unlikely(res != CS_SUCCESS)) ++ if (unlikely(res != 0)) + return -EBUSY; + *value = reg.Value; + +@@ -583,7 +583,7 @@ static int ssb_pcmcia_sprom_write_all(st + ssb_printk("."); + err = ssb_pcmcia_sprom_write(bus, i, sprom[i]); + if (err) { +- ssb_printk("\n" KERN_NOTICE PFX ++ ssb_printk(KERN_NOTICE PFX + "Failed to write to SPROM.\n"); + failed = 1; + break; +@@ -591,7 +591,7 @@ static int ssb_pcmcia_sprom_write_all(st + } + err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS); + if (err) { +- ssb_printk("\n" KERN_NOTICE PFX ++ ssb_printk(KERN_NOTICE PFX + "Could not disable SPROM write access.\n"); + failed = 1; + } +@@ -638,17 +638,17 @@ int ssb_pcmcia_get_invariants(struct ssb + tuple.TupleData = buf; + tuple.TupleDataMax = sizeof(buf); + res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != CS_SUCCESS, "MAC first tpl"); ++ GOTO_ERROR_ON(res != 0, "MAC first tpl"); + res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != CS_SUCCESS, "MAC first tpl data"); ++ GOTO_ERROR_ON(res != 0, "MAC first tpl data"); + while (1) { + GOTO_ERROR_ON(tuple.TupleDataLen < 1, "MAC tpl < 1"); + if (tuple.TupleData[0] == CISTPL_FUNCE_LAN_NODE_ID) + break; + res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != CS_SUCCESS, "MAC next tpl"); ++ GOTO_ERROR_ON(res != 0, "MAC next tpl"); + res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != CS_SUCCESS, "MAC next tpl data"); ++ GOTO_ERROR_ON(res != 0, "MAC next tpl data"); + } + GOTO_ERROR_ON(tuple.TupleDataLen != ETH_ALEN + 2, "MAC tpl size"); + memcpy(sprom->il0mac, &tuple.TupleData[2], ETH_ALEN); +@@ -659,9 +659,9 @@ int ssb_pcmcia_get_invariants(struct ssb + tuple.TupleData = buf; + tuple.TupleDataMax = sizeof(buf); + res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != CS_SUCCESS, "VEN first tpl"); ++ GOTO_ERROR_ON(res != 0, "VEN first tpl"); + res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != CS_SUCCESS, "VEN first tpl data"); ++ GOTO_ERROR_ON(res != 0, "VEN first tpl data"); + while (1) { + GOTO_ERROR_ON(tuple.TupleDataLen < 1, "VEN tpl < 1"); + switch (tuple.TupleData[0]) { +@@ -678,7 +678,8 @@ int ssb_pcmcia_get_invariants(struct ssb + sprom->board_rev = tuple.TupleData[1]; + break; + case SSB_PCMCIA_CIS_PA: +- GOTO_ERROR_ON(tuple.TupleDataLen != 9, ++ GOTO_ERROR_ON((tuple.TupleDataLen != 9) && ++ (tuple.TupleDataLen != 10), + "pa tpl size"); + sprom->pa0b0 = tuple.TupleData[1] | + ((u16)tuple.TupleData[2] << 8); +@@ -718,7 +719,8 @@ int ssb_pcmcia_get_invariants(struct ssb + sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1]; + break; + case SSB_PCMCIA_CIS_BFLAGS: +- GOTO_ERROR_ON(tuple.TupleDataLen != 3, ++ GOTO_ERROR_ON((tuple.TupleDataLen != 3) && ++ (tuple.TupleDataLen != 5), + "bfl tpl size"); + sprom->boardflags_lo = tuple.TupleData[1] | + ((u16)tuple.TupleData[2] << 8); +@@ -733,11 +735,11 @@ int ssb_pcmcia_get_invariants(struct ssb + break; + } + res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple); +- if (res == CS_NO_MORE_ITEMS) ++ if (res == -ENOSPC) + break; +- GOTO_ERROR_ON(res != CS_SUCCESS, "VEN next tpl"); ++ GOTO_ERROR_ON(res != 0, "VEN next tpl"); + res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != CS_SUCCESS, "VEN next tpl data"); ++ GOTO_ERROR_ON(res != 0, "VEN next tpl data"); + } + + return 0; +--- a/drivers/ssb/scan.c ++++ b/drivers/ssb/scan.c +@@ -175,6 +175,8 @@ static u32 scan_read32(struct ssb_bus *b + } else + ssb_pcmcia_switch_segment(bus, 0); + break; ++ default: ++ break; + } + return readl(bus->mmio + offset); + } +@@ -188,6 +190,8 @@ static int scan_switchcore(struct ssb_bu + return ssb_pci_switch_coreidx(bus, coreidx); + case SSB_BUSTYPE_PCMCIA: + return ssb_pcmcia_switch_coreidx(bus, coreidx); ++ default: ++ break; + } + return 0; + } +@@ -206,6 +210,8 @@ void ssb_iounmap(struct ssb_bus *bus) + SSB_BUG_ON(1); /* Can't reach this code. */ + #endif + break; ++ default: ++ break; + } + bus->mmio = NULL; + bus->mapped_device = NULL; +@@ -230,6 +236,8 @@ static void __iomem *ssb_ioremap(struct + SSB_BUG_ON(1); /* Can't reach this code. */ + #endif + break; ++ default: ++ break; + } + + return mmio; +--- a/include/linux/ssb/ssb.h ++++ b/include/linux/ssb/ssb.h +@@ -27,24 +27,54 @@ struct ssb_sprom { + u8 et1mdcport; /* MDIO for enet1 */ + u8 board_rev; /* Board revision number from SPROM. */ + u8 country_code; /* Country Code */ +- u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */ +- u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */ ++ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ ++ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ + u16 pa0b0; + u16 pa0b1; + u16 pa0b2; + u16 pa1b0; + u16 pa1b1; + u16 pa1b2; ++ u16 pa1lob0; ++ u16 pa1lob1; ++ u16 pa1lob2; ++ u16 pa1hib0; ++ u16 pa1hib1; ++ u16 pa1hib2; + u8 gpio0; /* GPIO pin 0 */ + u8 gpio1; /* GPIO pin 1 */ + u8 gpio2; /* GPIO pin 2 */ + u8 gpio3; /* GPIO pin 3 */ +- u16 maxpwr_a; /* A-PHY Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_bg; /* B/G-PHY Amplifier Max Power (in dBm Q5.2) */ ++ u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ ++ u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ ++ u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ ++ u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ + u8 itssi_a; /* Idle TSSI Target for A-PHY */ + u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ +- u16 boardflags_lo; /* Boardflags (low 16 bits) */ +- u16 boardflags_hi; /* Boardflags (high 16 bits) */ ++ u8 tri2g; /* 2.4GHz TX isolation */ ++ u8 tri5gl; /* 5.2GHz TX isolation */ ++ u8 tri5g; /* 5.3GHz TX isolation */ ++ u8 tri5gh; /* 5.8GHz TX isolation */ ++ u8 rxpo2g; /* 2GHz RX power offset */ ++ u8 rxpo5g; /* 5GHz RX power offset */ ++ u8 rssisav2g; /* 2GHz RSSI params */ ++ u8 rssismc2g; ++ u8 rssismf2g; ++ u8 bxa2g; /* 2GHz BX arch */ ++ u8 rssisav5g; /* 5GHz RSSI params */ ++ u8 rssismc5g; ++ u8 rssismf5g; ++ u8 bxa5g; /* 5GHz BX arch */ ++ u16 cck2gpo; /* CCK power offset */ ++ u32 ofdm2gpo; /* 2.4GHz OFDM power offset */ ++ u32 ofdm5glpo; /* 5.2GHz OFDM power offset */ ++ u32 ofdm5gpo; /* 5.3GHz OFDM power offset */ ++ u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */ ++ u16 boardflags_lo; /* Board flags (bits 0-15) */ ++ u16 boardflags_hi; /* Board flags (bits 16-31) */ ++ u16 boardflags2_lo; /* Board flags (bits 32-47) */ ++ u16 boardflags2_hi; /* Board flags (bits 48-63) */ ++ /* TODO store board flags in a single u64 */ + + /* Antenna gain values for up to 4 antennas + * on each band. Values in dBm/4 (Q5.2). Negative gain means the +@@ -58,7 +88,7 @@ struct ssb_sprom { + } ghz5; /* 5GHz band */ + } antenna_gain; + +- /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */ ++ /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ + }; + + /* Information about the PCB the circuitry is soldered on. */ +@@ -208,6 +238,7 @@ enum ssb_bustype { + SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */ + SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */ + SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */ ++ SSB_BUSTYPE_SDIO, /* SSB is connected to SDIO bus */ + }; + + /* board_vendor */ +@@ -240,8 +271,12 @@ struct ssb_bus { + + /* The core in the basic address register window. (PCI bus only) */ + struct ssb_device *mapped_device; +- /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ +- u8 mapped_pcmcia_seg; ++ union { ++ /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ ++ u8 mapped_pcmcia_seg; ++ /* Current SSB base address window for SDIO. */ ++ u32 sdio_sbaddr; ++ }; + /* Lock for core and segment switching. + * On PCMCIA-host busses this is used to protect the whole MMIO access. */ + spinlock_t bar_lock; +@@ -252,6 +287,11 @@ struct ssb_bus { + struct pci_dev *host_pci; + /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */ + struct pcmcia_device *host_pcmcia; ++ /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */ ++ struct sdio_func *host_sdio; ++ ++ /* See enum ssb_quirks */ ++ unsigned int quirks; + + #ifdef CONFIG_SSB_SPROM + /* Mutex to protect the SPROM writing. */ +@@ -306,6 +346,11 @@ struct ssb_bus { + #endif /* DEBUG */ + }; + ++enum ssb_quirks { ++ /* SDIO connected card requires performing a read after writing a 32-bit value */ ++ SSB_QUIRK_SDIO_READ_AFTER_WRITE32 = (1 << 0), ++}; ++ + /* The initialization-invariants. */ + struct ssb_init_invariants { + /* Versioning information about the PCB. */ +@@ -431,12 +476,16 @@ static inline int ssb_dma_mapping_error( + { + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: ++#ifdef CONFIG_SSB_PCIHOST + return pci_dma_mapping_error(dev->bus->host_pci, addr); ++#endif ++ break; + case SSB_BUSTYPE_SSB: + return dma_mapping_error(dev->dev, addr); + default: +- __ssb_dma_not_implemented(dev); ++ break; + } ++ __ssb_dma_not_implemented(dev); + return -ENOSYS; + } + +@@ -445,12 +494,16 @@ static inline dma_addr_t ssb_dma_map_sin + { + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: ++#ifdef CONFIG_SSB_PCIHOST + return pci_map_single(dev->bus->host_pci, p, size, dir); ++#endif ++ break; + case SSB_BUSTYPE_SSB: + return dma_map_single(dev->dev, p, size, dir); + default: +- __ssb_dma_not_implemented(dev); ++ break; + } ++ __ssb_dma_not_implemented(dev); + return 0; + } + +@@ -459,14 +512,18 @@ static inline void ssb_dma_unmap_single( + { + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: ++#ifdef CONFIG_SSB_PCIHOST + pci_unmap_single(dev->bus->host_pci, dma_addr, size, dir); + return; ++#endif ++ break; + case SSB_BUSTYPE_SSB: + dma_unmap_single(dev->dev, dma_addr, size, dir); + return; + default: +- __ssb_dma_not_implemented(dev); ++ break; + } ++ __ssb_dma_not_implemented(dev); + } + + static inline void ssb_dma_sync_single_for_cpu(struct ssb_device *dev, +@@ -476,15 +533,19 @@ static inline void ssb_dma_sync_single_f + { + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: ++#ifdef CONFIG_SSB_PCIHOST + pci_dma_sync_single_for_cpu(dev->bus->host_pci, dma_addr, + size, dir); + return; ++#endif ++ break; + case SSB_BUSTYPE_SSB: + dma_sync_single_for_cpu(dev->dev, dma_addr, size, dir); + return; + default: +- __ssb_dma_not_implemented(dev); ++ break; + } ++ __ssb_dma_not_implemented(dev); + } + + static inline void ssb_dma_sync_single_for_device(struct ssb_device *dev, +@@ -494,15 +555,19 @@ static inline void ssb_dma_sync_single_f + { + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: ++#ifdef CONFIG_SSB_PCIHOST + pci_dma_sync_single_for_device(dev->bus->host_pci, dma_addr, + size, dir); + return; ++#endif ++ break; + case SSB_BUSTYPE_SSB: + dma_sync_single_for_device(dev->dev, dma_addr, size, dir); + return; + default: +- __ssb_dma_not_implemented(dev); ++ break; + } ++ __ssb_dma_not_implemented(dev); + } + + static inline void ssb_dma_sync_single_range_for_cpu(struct ssb_device *dev, +@@ -513,17 +578,21 @@ static inline void ssb_dma_sync_single_r + { + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: ++#ifdef CONFIG_SSB_PCIHOST + /* Just sync everything. That's all the PCI API can do. */ + pci_dma_sync_single_for_cpu(dev->bus->host_pci, dma_addr, + offset + size, dir); + return; ++#endif ++ break; + case SSB_BUSTYPE_SSB: + dma_sync_single_range_for_cpu(dev->dev, dma_addr, offset, + size, dir); + return; + default: +- __ssb_dma_not_implemented(dev); ++ break; + } ++ __ssb_dma_not_implemented(dev); + } + + static inline void ssb_dma_sync_single_range_for_device(struct ssb_device *dev, +@@ -534,17 +603,21 @@ static inline void ssb_dma_sync_single_r + { + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: ++#ifdef CONFIG_SSB_PCIHOST + /* Just sync everything. That's all the PCI API can do. */ + pci_dma_sync_single_for_device(dev->bus->host_pci, dma_addr, + offset + size, dir); + return; ++#endif ++ break; + case SSB_BUSTYPE_SSB: + dma_sync_single_range_for_device(dev->dev, dma_addr, offset, + size, dir); + return; + default: +- __ssb_dma_not_implemented(dev); ++ break; + } ++ __ssb_dma_not_implemented(dev); + } + + +--- a/include/linux/ssb/ssb_driver_chipcommon.h ++++ b/include/linux/ssb/ssb_driver_chipcommon.h +@@ -181,6 +181,16 @@ + #define SSB_CHIPCO_PROG_WAITCNT 0x0124 + #define SSB_CHIPCO_FLASH_CFG 0x0128 + #define SSB_CHIPCO_FLASH_WAITCNT 0x012C ++#define SSB_CHIPCO_CLKCTLST 0x01E0 /* Clock control and status (rev >= 20) */ ++#define SSB_CHIPCO_CLKCTLST_FORCEALP 0x00000001 /* Force ALP request */ ++#define SSB_CHIPCO_CLKCTLST_FORCEHT 0x00000002 /* Force HT request */ ++#define SSB_CHIPCO_CLKCTLST_FORCEILP 0x00000004 /* Force ILP request */ ++#define SSB_CHIPCO_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */ ++#define SSB_CHIPCO_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */ ++#define SSB_CHIPCO_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */ ++#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00010000 /* HT available */ ++#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00020000 /* APL available */ ++#define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ + #define SSB_CHIPCO_UART0_DATA 0x0300 + #define SSB_CHIPCO_UART0_IMR 0x0304 + #define SSB_CHIPCO_UART0_FCR 0x0308 +@@ -197,6 +207,196 @@ + #define SSB_CHIPCO_UART1_LSR 0x0414 + #define SSB_CHIPCO_UART1_MSR 0x0418 + #define SSB_CHIPCO_UART1_SCRATCH 0x041C ++/* PMU registers (rev >= 20) */ ++#define SSB_CHIPCO_PMU_CTL 0x0600 /* PMU control */ ++#define SSB_CHIPCO_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ ++#define SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT 16 ++#define SSB_CHIPCO_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ ++#define SSB_CHIPCO_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ ++#define SSB_CHIPCO_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ ++#define SSB_CHIPCO_PMU_CTL_XTALFREQ 0x0000007C /* Crystal freq */ ++#define SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT 2 ++#define SSB_CHIPCO_PMU_CTL_ILPDIVEN 0x00000002 /* ILP div enable */ ++#define SSB_CHIPCO_PMU_CTL_LPOSEL 0x00000001 /* LPO sel */ ++#define SSB_CHIPCO_PMU_CAP 0x0604 /* PMU capabilities */ ++#define SSB_CHIPCO_PMU_CAP_REVISION 0x000000FF /* Revision mask */ ++#define SSB_CHIPCO_PMU_STAT 0x0608 /* PMU status */ ++#define SSB_CHIPCO_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */ ++#define SSB_CHIPCO_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */ ++#define SSB_CHIPCO_PMU_STAT_HAVEALP 0x00000008 /* ALP available */ ++#define SSB_CHIPCO_PMU_STAT_HAVEHT 0x00000004 /* HT available */ ++#define SSB_CHIPCO_PMU_STAT_RESINIT 0x00000003 /* Res init */ ++#define SSB_CHIPCO_PMU_RES_STAT 0x060C /* PMU res status */ ++#define SSB_CHIPCO_PMU_RES_PEND 0x0610 /* PMU res pending */ ++#define SSB_CHIPCO_PMU_TIMER 0x0614 /* PMU timer */ ++#define SSB_CHIPCO_PMU_MINRES_MSK 0x0618 /* PMU min res mask */ ++#define SSB_CHIPCO_PMU_MAXRES_MSK 0x061C /* PMU max res mask */ ++#define SSB_CHIPCO_PMU_RES_TABSEL 0x0620 /* PMU res table sel */ ++#define SSB_CHIPCO_PMU_RES_DEPMSK 0x0624 /* PMU res dep mask */ ++#define SSB_CHIPCO_PMU_RES_UPDNTM 0x0628 /* PMU res updown timer */ ++#define SSB_CHIPCO_PMU_RES_TIMER 0x062C /* PMU res timer */ ++#define SSB_CHIPCO_PMU_CLKSTRETCH 0x0630 /* PMU clockstretch */ ++#define SSB_CHIPCO_PMU_WATCHDOG 0x0634 /* PMU watchdog */ ++#define SSB_CHIPCO_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */ ++#define SSB_CHIPCO_PMU_RES_REQT 0x0644 /* PMU res req timer */ ++#define SSB_CHIPCO_PMU_RES_REQM 0x0648 /* PMU res req mask */ ++#define SSB_CHIPCO_CHIPCTL_ADDR 0x0650 ++#define SSB_CHIPCO_CHIPCTL_DATA 0x0654 ++#define SSB_CHIPCO_REGCTL_ADDR 0x0658 ++#define SSB_CHIPCO_REGCTL_DATA 0x065C ++#define SSB_CHIPCO_PLLCTL_ADDR 0x0660 ++#define SSB_CHIPCO_PLLCTL_DATA 0x0664 ++ ++ ++ ++/** PMU PLL registers */ ++ ++/* PMU rev 0 PLL registers */ ++#define SSB_PMU0_PLLCTL0 0 ++#define SSB_PMU0_PLLCTL0_PDIV_MSK 0x00000001 ++#define SSB_PMU0_PLLCTL0_PDIV_FREQ 25000 /* kHz */ ++#define SSB_PMU0_PLLCTL1 1 ++#define SSB_PMU0_PLLCTL1_WILD_IMSK 0xF0000000 /* Wild int mask (low nibble) */ ++#define SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT 28 ++#define SSB_PMU0_PLLCTL1_WILD_FMSK 0x0FFFFF00 /* Wild frac mask */ ++#define SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT 8 ++#define SSB_PMU0_PLLCTL1_STOPMOD 0x00000040 /* Stop mod */ ++#define SSB_PMU0_PLLCTL2 2 ++#define SSB_PMU0_PLLCTL2_WILD_IMSKHI 0x0000000F /* Wild int mask (high nibble) */ ++#define SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT 0 ++ ++/* PMU rev 1 PLL registers */ ++#define SSB_PMU1_PLLCTL0 0 ++#define SSB_PMU1_PLLCTL0_P1DIV 0x00F00000 /* P1 div */ ++#define SSB_PMU1_PLLCTL0_P1DIV_SHIFT 20 ++#define SSB_PMU1_PLLCTL0_P2DIV 0x0F000000 /* P2 div */ ++#define SSB_PMU1_PLLCTL0_P2DIV_SHIFT 24 ++#define SSB_PMU1_PLLCTL1 1 ++#define SSB_PMU1_PLLCTL1_M1DIV 0x000000FF /* M1 div */ ++#define SSB_PMU1_PLLCTL1_M1DIV_SHIFT 0 ++#define SSB_PMU1_PLLCTL1_M2DIV 0x0000FF00 /* M2 div */ ++#define SSB_PMU1_PLLCTL1_M2DIV_SHIFT 8 ++#define SSB_PMU1_PLLCTL1_M3DIV 0x00FF0000 /* M3 div */ ++#define SSB_PMU1_PLLCTL1_M3DIV_SHIFT 16 ++#define SSB_PMU1_PLLCTL1_M4DIV 0xFF000000 /* M4 div */ ++#define SSB_PMU1_PLLCTL1_M4DIV_SHIFT 24 ++#define SSB_PMU1_PLLCTL2 2 ++#define SSB_PMU1_PLLCTL2_M5DIV 0x000000FF /* M5 div */ ++#define SSB_PMU1_PLLCTL2_M5DIV_SHIFT 0 ++#define SSB_PMU1_PLLCTL2_M6DIV 0x0000FF00 /* M6 div */ ++#define SSB_PMU1_PLLCTL2_M6DIV_SHIFT 8 ++#define SSB_PMU1_PLLCTL2_NDIVMODE 0x000E0000 /* NDIV mode */ ++#define SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT 17 ++#define SSB_PMU1_PLLCTL2_NDIVINT 0x1FF00000 /* NDIV int */ ++#define SSB_PMU1_PLLCTL2_NDIVINT_SHIFT 20 ++#define SSB_PMU1_PLLCTL3 3 ++#define SSB_PMU1_PLLCTL3_NDIVFRAC 0x00FFFFFF /* NDIV frac */ ++#define SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT 0 ++#define SSB_PMU1_PLLCTL4 4 ++#define SSB_PMU1_PLLCTL5 5 ++#define SSB_PMU1_PLLCTL5_CLKDRV 0xFFFFFF00 /* clk drv */ ++#define SSB_PMU1_PLLCTL5_CLKDRV_SHIFT 8 ++ ++/* BCM4312 PLL resource numbers. */ ++#define SSB_PMURES_4312_SWITCHER_BURST 0 ++#define SSB_PMURES_4312_SWITCHER_PWM 1 ++#define SSB_PMURES_4312_PA_REF_LDO 2 ++#define SSB_PMURES_4312_CORE_LDO_BURST 3 ++#define SSB_PMURES_4312_CORE_LDO_PWM 4 ++#define SSB_PMURES_4312_RADIO_LDO 5 ++#define SSB_PMURES_4312_ILP_REQUEST 6 ++#define SSB_PMURES_4312_BG_FILTBYP 7 ++#define SSB_PMURES_4312_TX_FILTBYP 8 ++#define SSB_PMURES_4312_RX_FILTBYP 9 ++#define SSB_PMURES_4312_XTAL_PU 10 ++#define SSB_PMURES_4312_ALP_AVAIL 11 ++#define SSB_PMURES_4312_BB_PLL_FILTBYP 12 ++#define SSB_PMURES_4312_RF_PLL_FILTBYP 13 ++#define SSB_PMURES_4312_HT_AVAIL 14 ++ ++/* BCM4325 PLL resource numbers. */ ++#define SSB_PMURES_4325_BUCK_BOOST_BURST 0 ++#define SSB_PMURES_4325_CBUCK_BURST 1 ++#define SSB_PMURES_4325_CBUCK_PWM 2 ++#define SSB_PMURES_4325_CLDO_CBUCK_BURST 3 ++#define SSB_PMURES_4325_CLDO_CBUCK_PWM 4 ++#define SSB_PMURES_4325_BUCK_BOOST_PWM 5 ++#define SSB_PMURES_4325_ILP_REQUEST 6 ++#define SSB_PMURES_4325_ABUCK_BURST 7 ++#define SSB_PMURES_4325_ABUCK_PWM 8 ++#define SSB_PMURES_4325_LNLDO1_PU 9 ++#define SSB_PMURES_4325_LNLDO2_PU 10 ++#define SSB_PMURES_4325_LNLDO3_PU 11 ++#define SSB_PMURES_4325_LNLDO4_PU 12 ++#define SSB_PMURES_4325_XTAL_PU 13 ++#define SSB_PMURES_4325_ALP_AVAIL 14 ++#define SSB_PMURES_4325_RX_PWRSW_PU 15 ++#define SSB_PMURES_4325_TX_PWRSW_PU 16 ++#define SSB_PMURES_4325_RFPLL_PWRSW_PU 17 ++#define SSB_PMURES_4325_LOGEN_PWRSW_PU 18 ++#define SSB_PMURES_4325_AFE_PWRSW_PU 19 ++#define SSB_PMURES_4325_BBPLL_PWRSW_PU 20 ++#define SSB_PMURES_4325_HT_AVAIL 21 ++ ++/* BCM4328 PLL resource numbers. */ ++#define SSB_PMURES_4328_EXT_SWITCHER_PWM 0 ++#define SSB_PMURES_4328_BB_SWITCHER_PWM 1 ++#define SSB_PMURES_4328_BB_SWITCHER_BURST 2 ++#define SSB_PMURES_4328_BB_EXT_SWITCHER_BURST 3 ++#define SSB_PMURES_4328_ILP_REQUEST 4 ++#define SSB_PMURES_4328_RADIO_SWITCHER_PWM 5 ++#define SSB_PMURES_4328_RADIO_SWITCHER_BURST 6 ++#define SSB_PMURES_4328_ROM_SWITCH 7 ++#define SSB_PMURES_4328_PA_REF_LDO 8 ++#define SSB_PMURES_4328_RADIO_LDO 9 ++#define SSB_PMURES_4328_AFE_LDO 10 ++#define SSB_PMURES_4328_PLL_LDO 11 ++#define SSB_PMURES_4328_BG_FILTBYP 12 ++#define SSB_PMURES_4328_TX_FILTBYP 13 ++#define SSB_PMURES_4328_RX_FILTBYP 14 ++#define SSB_PMURES_4328_XTAL_PU 15 ++#define SSB_PMURES_4328_XTAL_EN 16 ++#define SSB_PMURES_4328_BB_PLL_FILTBYP 17 ++#define SSB_PMURES_4328_RF_PLL_FILTBYP 18 ++#define SSB_PMURES_4328_BB_PLL_PU 19 ++ ++/* BCM5354 PLL resource numbers. */ ++#define SSB_PMURES_5354_EXT_SWITCHER_PWM 0 ++#define SSB_PMURES_5354_BB_SWITCHER_PWM 1 ++#define SSB_PMURES_5354_BB_SWITCHER_BURST 2 ++#define SSB_PMURES_5354_BB_EXT_SWITCHER_BURST 3 ++#define SSB_PMURES_5354_ILP_REQUEST 4 ++#define SSB_PMURES_5354_RADIO_SWITCHER_PWM 5 ++#define SSB_PMURES_5354_RADIO_SWITCHER_BURST 6 ++#define SSB_PMURES_5354_ROM_SWITCH 7 ++#define SSB_PMURES_5354_PA_REF_LDO 8 ++#define SSB_PMURES_5354_RADIO_LDO 9 ++#define SSB_PMURES_5354_AFE_LDO 10 ++#define SSB_PMURES_5354_PLL_LDO 11 ++#define SSB_PMURES_5354_BG_FILTBYP 12 ++#define SSB_PMURES_5354_TX_FILTBYP 13 ++#define SSB_PMURES_5354_RX_FILTBYP 14 ++#define SSB_PMURES_5354_XTAL_PU 15 ++#define SSB_PMURES_5354_XTAL_EN 16 ++#define SSB_PMURES_5354_BB_PLL_FILTBYP 17 ++#define SSB_PMURES_5354_RF_PLL_FILTBYP 18 ++#define SSB_PMURES_5354_BB_PLL_PU 19 ++ ++ ++ ++/** Chip specific Chip-Status register contents. */ ++#define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003 ++#define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */ ++#define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */ ++#define SSB_CHIPCO_CHST_4325_OTP_SEL 2 /* OTP is powered up, no SPROM */ ++#define SSB_CHIPCO_CHST_4325_OTP_PWRDN 3 /* OTP is powered down, SPROM is present */ ++#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE 0x00000004 ++#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE_SHIFT 2 ++#define SSB_CHIPCO_CHST_4325_RCAL_VALID 0x00000008 ++#define SSB_CHIPCO_CHST_4325_RCAL_VALID_SHIFT 3 ++#define SSB_CHIPCO_CHST_4325_RCAL_VALUE 0x000001F0 ++#define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4 ++#define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */ + + + +@@ -353,11 +553,20 @@ + struct ssb_device; + struct ssb_serial_port; + ++/* Data for the PMU, if available. ++ * Check availability with ((struct ssb_chipcommon)->capabilities & SSB_CHIPCO_CAP_PMU) ++ */ ++struct ssb_chipcommon_pmu { ++ u8 rev; /* PMU revision */ ++ u32 crystalfreq; /* The active crystal frequency (in kHz) */ ++}; ++ + struct ssb_chipcommon { + struct ssb_device *dev; + u32 capabilities; + /* Fast Powerup Delay constant */ + u16 fast_pwrup_delay; ++ struct ssb_chipcommon_pmu pmu; + }; + + static inline bool ssb_chipco_available(struct ssb_chipcommon *cc) +@@ -365,6 +574,17 @@ static inline bool ssb_chipco_available( + return (cc->dev != NULL); + } + ++/* Register access */ ++#define chipco_read32(cc, offset) ssb_read32((cc)->dev, offset) ++#define chipco_write32(cc, offset, val) ssb_write32((cc)->dev, offset, val) ++ ++#define chipco_mask32(cc, offset, mask) \ ++ chipco_write32(cc, offset, chipco_read32(cc, offset) & (mask)) ++#define chipco_set32(cc, offset, set) \ ++ chipco_write32(cc, offset, chipco_read32(cc, offset) | (set)) ++#define chipco_maskset32(cc, offset, mask, set) \ ++ chipco_write32(cc, offset, (chipco_read32(cc, offset) & (mask)) | (set)) ++ + extern void ssb_chipcommon_init(struct ssb_chipcommon *cc); + + extern void ssb_chipco_suspend(struct ssb_chipcommon *cc); +@@ -406,4 +626,18 @@ extern int ssb_chipco_serial_init(struct + struct ssb_serial_port *ports); + #endif /* CONFIG_SSB_SERIAL */ + ++/* PMU support */ ++extern void ssb_pmu_init(struct ssb_chipcommon *cc); ++ ++enum ssb_pmu_ldo_volt_id { ++ LDO_PAREF = 0, ++ LDO_VOLT1, ++ LDO_VOLT2, ++ LDO_VOLT3, ++}; ++ ++void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc, ++ enum ssb_pmu_ldo_volt_id id, u32 voltage); ++void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on); ++ + #endif /* LINUX_SSB_CHIPCO_H_ */ +--- a/include/linux/ssb/ssb_regs.h ++++ b/include/linux/ssb/ssb_regs.h +@@ -162,7 +162,7 @@ + + /* SPROM shadow area. If not otherwise noted, fields are + * two bytes wide. Note that the SPROM can _only_ be read +- * in two-byte quantinies. ++ * in two-byte quantities. + */ + #define SSB_SPROMSIZE_WORDS 64 + #define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16)) +@@ -245,8 +245,6 @@ + + /* SPROM Revision 3 (inherits most data from rev 2) */ + #define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */ +-#define SSB_SPROM3_ET0MAC 0x1050 /* 6 bytes MAC address for Ethernet ?? */ +-#define SSB_SPROM3_ET1MAC 0x1050 /* 6 bytes MAC address for 802.11a ?? */ + #define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */ + #define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */ + #define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */ +@@ -267,8 +265,6 @@ + + /* SPROM Revision 4 */ + #define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */ +-#define SSB_SPROM4_ET0MAC 0x1018 /* 6 bytes MAC address for Ethernet ?? */ +-#define SSB_SPROM4_ET1MAC 0x1018 /* 6 bytes MAC address for 802.11a ?? */ + #define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */ + #define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ + #define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ +@@ -316,6 +312,109 @@ + #define SSB_SPROM4_PA1B1 0x1090 + #define SSB_SPROM4_PA1B2 0x1092 + ++/* SPROM Revision 5 (inherits most data from rev 4) */ ++#define SSB_SPROM5_BFLLO 0x104A /* Boardflags (low 16 bits) */ ++#define SSB_SPROM5_BFLHI 0x104C /* Board Flags Hi */ ++#define SSB_SPROM5_IL0MAC 0x1052 /* 6 byte MAC address for a/b/g/n */ ++#define SSB_SPROM5_CCODE 0x1044 /* Country Code (2 bytes) */ ++#define SSB_SPROM5_GPIOA 0x1076 /* Gen. Purpose IO # 0 and 1 */ ++#define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */ ++#define SSB_SPROM5_GPIOA_P1 0xFF00 /* Pin 1 */ ++#define SSB_SPROM5_GPIOA_P1_SHIFT 8 ++#define SSB_SPROM5_GPIOB 0x1078 /* Gen. Purpose IO # 2 and 3 */ ++#define SSB_SPROM5_GPIOB_P2 0x00FF /* Pin 2 */ ++#define SSB_SPROM5_GPIOB_P3 0xFF00 /* Pin 3 */ ++#define SSB_SPROM5_GPIOB_P3_SHIFT 8 ++ ++/* SPROM Revision 8 */ ++#define SSB_SPROM8_BOARDREV 0x1082 /* Board revision */ ++#define SSB_SPROM8_BFLLO 0x1084 /* Board flags (bits 0-15) */ ++#define SSB_SPROM8_BFLHI 0x1086 /* Board flags (bits 16-31) */ ++#define SSB_SPROM8_BFL2LO 0x1088 /* Board flags (bits 32-47) */ ++#define SSB_SPROM8_BFL2HI 0x108A /* Board flags (bits 48-63) */ ++#define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */ ++#define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */ ++#define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/ ++#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ ++#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 ++#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */ ++#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0 ++#define SSB_SPROM8_AGAIN01 0x109E /* Antenna Gain (in dBm Q5.2) */ ++#define SSB_SPROM8_AGAIN0 0x00FF /* Antenna 0 */ ++#define SSB_SPROM8_AGAIN0_SHIFT 0 ++#define SSB_SPROM8_AGAIN1 0xFF00 /* Antenna 1 */ ++#define SSB_SPROM8_AGAIN1_SHIFT 8 ++#define SSB_SPROM8_AGAIN23 0x10A0 ++#define SSB_SPROM8_AGAIN2 0x00FF /* Antenna 2 */ ++#define SSB_SPROM8_AGAIN2_SHIFT 0 ++#define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */ ++#define SSB_SPROM8_AGAIN3_SHIFT 8 ++#define SSB_SPROM8_GPIOA 0x1096 /*Gen. Purpose IO # 0 and 1 */ ++#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */ ++#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */ ++#define SSB_SPROM8_GPIOA_P1_SHIFT 8 ++#define SSB_SPROM8_GPIOB 0x1098 /* Gen. Purpose IO # 2 and 3 */ ++#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ ++#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ ++#define SSB_SPROM8_GPIOB_P3_SHIFT 8 ++#define SSB_SPROM8_RSSIPARM2G 0x10A4 /* RSSI params for 2GHz */ ++#define SSB_SPROM8_RSSISMF2G 0x000F ++#define SSB_SPROM8_RSSISMC2G 0x00F0 ++#define SSB_SPROM8_RSSISMC2G_SHIFT 4 ++#define SSB_SPROM8_RSSISAV2G 0x0700 ++#define SSB_SPROM8_RSSISAV2G_SHIFT 8 ++#define SSB_SPROM8_BXA2G 0x1800 ++#define SSB_SPROM8_BXA2G_SHIFT 11 ++#define SSB_SPROM8_RSSIPARM5G 0x10A6 /* RSSI params for 5GHz */ ++#define SSB_SPROM8_RSSISMF5G 0x000F ++#define SSB_SPROM8_RSSISMC5G 0x00F0 ++#define SSB_SPROM8_RSSISMC5G_SHIFT 4 ++#define SSB_SPROM8_RSSISAV5G 0x0700 ++#define SSB_SPROM8_RSSISAV5G_SHIFT 8 ++#define SSB_SPROM8_BXA5G 0x1800 ++#define SSB_SPROM8_BXA5G_SHIFT 11 ++#define SSB_SPROM8_TRI25G 0x10A8 /* TX isolation 2.4&5.3GHz */ ++#define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */ ++#define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */ ++#define SSB_SPROM8_TRI5G_SHIFT 8 ++#define SSB_SPROM8_TRI5GHL 0x10AA /* TX isolation 5.2/5.8GHz */ ++#define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */ ++#define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */ ++#define SSB_SPROM8_TRI5GH_SHIFT 8 ++#define SSB_SPROM8_RXPO 0x10AC /* RX power offsets */ ++#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ ++#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ ++#define SSB_SPROM8_RXPO5G_SHIFT 8 ++#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power 2GHz in path 1 */ ++#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ ++#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ ++#define SSB_SPROM8_ITSSI_BG_SHIFT 8 ++#define SSB_SPROM8_PA0B0 0x10C2 /* 2GHz power amp settings */ ++#define SSB_SPROM8_PA0B1 0x10C4 ++#define SSB_SPROM8_PA0B2 0x10C6 ++#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power 5.3GHz */ ++#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */ ++#define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ ++#define SSB_SPROM8_ITSSI_A_SHIFT 8 ++#define SSB_SPROM8_MAXP_AHL 0x10CA /* Max Power 5.2/5.8GHz */ ++#define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */ ++#define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */ ++#define SSB_SPROM8_MAXP_AL_SHIFT 8 ++#define SSB_SPROM8_PA1B0 0x10CC /* 5.3GHz power amp settings */ ++#define SSB_SPROM8_PA1B1 0x10CE ++#define SSB_SPROM8_PA1B2 0x10D0 ++#define SSB_SPROM8_PA1LOB0 0x10D2 /* 5.2GHz power amp settings */ ++#define SSB_SPROM8_PA1LOB1 0x10D4 ++#define SSB_SPROM8_PA1LOB2 0x10D6 ++#define SSB_SPROM8_PA1HIB0 0x10D8 /* 5.8GHz power amp settings */ ++#define SSB_SPROM8_PA1HIB1 0x10DA ++#define SSB_SPROM8_PA1HIB2 0x10DC ++#define SSB_SPROM8_CCK2GPO 0x1140 /* CCK power offset */ ++#define SSB_SPROM8_OFDM2GPO 0x1142 /* 2.4GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GPO 0x1146 /* 5.3GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GLPO 0x114A /* 5.2GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GHPO 0x114E /* 5.8GHz OFDM power offset */ ++ + /* Values for SSB_SPROM1_BINF_CCODE */ + enum { + SSB_SPROM1CCODE_WORLD = 0, +--- /dev/null ++++ b/drivers/ssb/driver_chipcommon_pmu.c +@@ -0,0 +1,602 @@ ++/* ++ * Sonics Silicon Backplane ++ * Broadcom ChipCommon Power Management Unit driver ++ * ++ * Copyright 2009, Michael Buesch <mb@bu3sch.de> ++ * Copyright 2007, Broadcom Corporation ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include <linux/ssb/ssb.h> ++#include <linux/ssb/ssb_regs.h> ++#include <linux/ssb/ssb_driver_chipcommon.h> ++#include <linux/delay.h> ++ ++#include "ssb_private.h" ++ ++static u32 ssb_chipco_pll_read(struct ssb_chipcommon *cc, u32 offset) ++{ ++ chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, offset); ++ return chipco_read32(cc, SSB_CHIPCO_PLLCTL_DATA); ++} ++ ++static void ssb_chipco_pll_write(struct ssb_chipcommon *cc, ++ u32 offset, u32 value) ++{ ++ chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, offset); ++ chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value); ++} ++ ++static void ssb_chipco_regctl_maskset(struct ssb_chipcommon *cc, ++ u32 offset, u32 mask, u32 set) ++{ ++ u32 value; ++ ++ chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR); ++ chipco_write32(cc, SSB_CHIPCO_REGCTL_ADDR, offset); ++ chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR); ++ value = chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA); ++ value &= mask; ++ value |= set; ++ chipco_write32(cc, SSB_CHIPCO_REGCTL_DATA, value); ++ chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA); ++} ++ ++struct pmu0_plltab_entry { ++ u16 freq; /* Crystal frequency in kHz.*/ ++ u8 xf; /* Crystal frequency value for PMU control */ ++ u8 wb_int; ++ u32 wb_frac; ++}; ++ ++static const struct pmu0_plltab_entry pmu0_plltab[] = { ++ { .freq = 12000, .xf = 1, .wb_int = 73, .wb_frac = 349525, }, ++ { .freq = 13000, .xf = 2, .wb_int = 67, .wb_frac = 725937, }, ++ { .freq = 14400, .xf = 3, .wb_int = 61, .wb_frac = 116508, }, ++ { .freq = 15360, .xf = 4, .wb_int = 57, .wb_frac = 305834, }, ++ { .freq = 16200, .xf = 5, .wb_int = 54, .wb_frac = 336579, }, ++ { .freq = 16800, .xf = 6, .wb_int = 52, .wb_frac = 399457, }, ++ { .freq = 19200, .xf = 7, .wb_int = 45, .wb_frac = 873813, }, ++ { .freq = 19800, .xf = 8, .wb_int = 44, .wb_frac = 466033, }, ++ { .freq = 20000, .xf = 9, .wb_int = 44, .wb_frac = 0, }, ++ { .freq = 25000, .xf = 10, .wb_int = 70, .wb_frac = 419430, }, ++ { .freq = 26000, .xf = 11, .wb_int = 67, .wb_frac = 725937, }, ++ { .freq = 30000, .xf = 12, .wb_int = 58, .wb_frac = 699050, }, ++ { .freq = 38400, .xf = 13, .wb_int = 45, .wb_frac = 873813, }, ++ { .freq = 40000, .xf = 14, .wb_int = 45, .wb_frac = 0, }, ++}; ++#define SSB_PMU0_DEFAULT_XTALFREQ 20000 ++ ++static const struct pmu0_plltab_entry * pmu0_plltab_find_entry(u32 crystalfreq) ++{ ++ const struct pmu0_plltab_entry *e; ++ unsigned int i; ++ ++ for (i = 0; i < ARRAY_SIZE(pmu0_plltab); i++) { ++ e = &pmu0_plltab[i]; ++ if (e->freq == crystalfreq) ++ return e; ++ } ++ ++ return NULL; ++} ++ ++/* Tune the PLL to the crystal speed. crystalfreq is in kHz. */ ++static void ssb_pmu0_pllinit_r0(struct ssb_chipcommon *cc, ++ u32 crystalfreq) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ const struct pmu0_plltab_entry *e = NULL; ++ u32 pmuctl, tmp, pllctl; ++ unsigned int i; ++ ++ if ((bus->chip_id == 0x5354) && !crystalfreq) { ++ /* The 5354 crystal freq is 25MHz */ ++ crystalfreq = 25000; ++ } ++ if (crystalfreq) ++ e = pmu0_plltab_find_entry(crystalfreq); ++ if (!e) ++ e = pmu0_plltab_find_entry(SSB_PMU0_DEFAULT_XTALFREQ); ++ BUG_ON(!e); ++ crystalfreq = e->freq; ++ cc->pmu.crystalfreq = e->freq; ++ ++ /* Check if the PLL already is programmed to this frequency. */ ++ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL); ++ if (((pmuctl & SSB_CHIPCO_PMU_CTL_XTALFREQ) >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) == e->xf) { ++ /* We're already there... */ ++ return; ++ } ++ ++ ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n", ++ (crystalfreq / 1000), (crystalfreq % 1000)); ++ ++ /* First turn the PLL off. */ ++ switch (bus->chip_id) { ++ case 0x4328: ++ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, ++ ~(1 << SSB_PMURES_4328_BB_PLL_PU)); ++ chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, ++ ~(1 << SSB_PMURES_4328_BB_PLL_PU)); ++ break; ++ case 0x5354: ++ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, ++ ~(1 << SSB_PMURES_5354_BB_PLL_PU)); ++ chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, ++ ~(1 << SSB_PMURES_5354_BB_PLL_PU)); ++ break; ++ default: ++ SSB_WARN_ON(1); ++ } ++ for (i = 1500; i; i--) { ++ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST); ++ if (!(tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)) ++ break; ++ udelay(10); ++ } ++ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST); ++ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT) ++ ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n"); ++ ++ /* Set PDIV in PLL control 0. */ ++ pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0); ++ if (crystalfreq >= SSB_PMU0_PLLCTL0_PDIV_FREQ) ++ pllctl |= SSB_PMU0_PLLCTL0_PDIV_MSK; ++ else ++ pllctl &= ~SSB_PMU0_PLLCTL0_PDIV_MSK; ++ ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL0, pllctl); ++ ++ /* Set WILD in PLL control 1. */ ++ pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL1); ++ pllctl &= ~SSB_PMU0_PLLCTL1_STOPMOD; ++ pllctl &= ~(SSB_PMU0_PLLCTL1_WILD_IMSK | SSB_PMU0_PLLCTL1_WILD_FMSK); ++ pllctl |= ((u32)e->wb_int << SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT) & SSB_PMU0_PLLCTL1_WILD_IMSK; ++ pllctl |= ((u32)e->wb_frac << SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT) & SSB_PMU0_PLLCTL1_WILD_FMSK; ++ if (e->wb_frac == 0) ++ pllctl |= SSB_PMU0_PLLCTL1_STOPMOD; ++ ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL1, pllctl); ++ ++ /* Set WILD in PLL control 2. */ ++ pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL2); ++ pllctl &= ~SSB_PMU0_PLLCTL2_WILD_IMSKHI; ++ pllctl |= (((u32)e->wb_int >> 4) << SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT) & SSB_PMU0_PLLCTL2_WILD_IMSKHI; ++ ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL2, pllctl); ++ ++ /* Set the crystalfrequency and the divisor. */ ++ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL); ++ pmuctl &= ~SSB_CHIPCO_PMU_CTL_ILP_DIV; ++ pmuctl |= (((crystalfreq + 127) / 128 - 1) << SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT) ++ & SSB_CHIPCO_PMU_CTL_ILP_DIV; ++ pmuctl &= ~SSB_CHIPCO_PMU_CTL_XTALFREQ; ++ pmuctl |= ((u32)e->xf << SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) & SSB_CHIPCO_PMU_CTL_XTALFREQ; ++ chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl); ++} ++ ++struct pmu1_plltab_entry { ++ u16 freq; /* Crystal frequency in kHz.*/ ++ u8 xf; /* Crystal frequency value for PMU control */ ++ u8 ndiv_int; ++ u32 ndiv_frac; ++ u8 p1div; ++ u8 p2div; ++}; ++ ++static const struct pmu1_plltab_entry pmu1_plltab[] = { ++ { .freq = 12000, .xf = 1, .p1div = 3, .p2div = 22, .ndiv_int = 0x9, .ndiv_frac = 0xFFFFEF, }, ++ { .freq = 13000, .xf = 2, .p1div = 1, .p2div = 6, .ndiv_int = 0xb, .ndiv_frac = 0x483483, }, ++ { .freq = 14400, .xf = 3, .p1div = 1, .p2div = 10, .ndiv_int = 0xa, .ndiv_frac = 0x1C71C7, }, ++ { .freq = 15360, .xf = 4, .p1div = 1, .p2div = 5, .ndiv_int = 0xb, .ndiv_frac = 0x755555, }, ++ { .freq = 16200, .xf = 5, .p1div = 1, .p2div = 10, .ndiv_int = 0x5, .ndiv_frac = 0x6E9E06, }, ++ { .freq = 16800, .xf = 6, .p1div = 1, .p2div = 10, .ndiv_int = 0x5, .ndiv_frac = 0x3CF3CF, }, ++ { .freq = 19200, .xf = 7, .p1div = 1, .p2div = 9, .ndiv_int = 0x5, .ndiv_frac = 0x17B425, }, ++ { .freq = 19800, .xf = 8, .p1div = 1, .p2div = 11, .ndiv_int = 0x4, .ndiv_frac = 0xA57EB, }, ++ { .freq = 20000, .xf = 9, .p1div = 1, .p2div = 11, .ndiv_int = 0x4, .ndiv_frac = 0, }, ++ { .freq = 24000, .xf = 10, .p1div = 3, .p2div = 11, .ndiv_int = 0xa, .ndiv_frac = 0, }, ++ { .freq = 25000, .xf = 11, .p1div = 5, .p2div = 16, .ndiv_int = 0xb, .ndiv_frac = 0, }, ++ { .freq = 26000, .xf = 12, .p1div = 1, .p2div = 2, .ndiv_int = 0x10, .ndiv_frac = 0xEC4EC4, }, ++ { .freq = 30000, .xf = 13, .p1div = 3, .p2div = 8, .ndiv_int = 0xb, .ndiv_frac = 0, }, ++ { .freq = 38400, .xf = 14, .p1div = 1, .p2div = 5, .ndiv_int = 0x4, .ndiv_frac = 0x955555, }, ++ { .freq = 40000, .xf = 15, .p1div = 1, .p2div = 2, .ndiv_int = 0xb, .ndiv_frac = 0, }, ++}; ++ ++#define SSB_PMU1_DEFAULT_XTALFREQ 15360 ++ ++static const struct pmu1_plltab_entry * pmu1_plltab_find_entry(u32 crystalfreq) ++{ ++ const struct pmu1_plltab_entry *e; ++ unsigned int i; ++ ++ for (i = 0; i < ARRAY_SIZE(pmu1_plltab); i++) { ++ e = &pmu1_plltab[i]; ++ if (e->freq == crystalfreq) ++ return e; ++ } ++ ++ return NULL; ++} ++ ++/* Tune the PLL to the crystal speed. crystalfreq is in kHz. */ ++static void ssb_pmu1_pllinit_r0(struct ssb_chipcommon *cc, ++ u32 crystalfreq) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ const struct pmu1_plltab_entry *e = NULL; ++ u32 buffer_strength = 0; ++ u32 tmp, pllctl, pmuctl; ++ unsigned int i; ++ ++ if (bus->chip_id == 0x4312) { ++ /* We do not touch the BCM4312 PLL and assume ++ * the default crystal settings work out-of-the-box. */ ++ cc->pmu.crystalfreq = 20000; ++ return; ++ } ++ ++ if (crystalfreq) ++ e = pmu1_plltab_find_entry(crystalfreq); ++ if (!e) ++ e = pmu1_plltab_find_entry(SSB_PMU1_DEFAULT_XTALFREQ); ++ BUG_ON(!e); ++ crystalfreq = e->freq; ++ cc->pmu.crystalfreq = e->freq; ++ ++ /* Check if the PLL already is programmed to this frequency. */ ++ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL); ++ if (((pmuctl & SSB_CHIPCO_PMU_CTL_XTALFREQ) >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) == e->xf) { ++ /* We're already there... */ ++ return; ++ } ++ ++ ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n", ++ (crystalfreq / 1000), (crystalfreq % 1000)); ++ ++ /* First turn the PLL off. */ ++ switch (bus->chip_id) { ++ case 0x4325: ++ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, ++ ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) | ++ (1 << SSB_PMURES_4325_HT_AVAIL))); ++ chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, ++ ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) | ++ (1 << SSB_PMURES_4325_HT_AVAIL))); ++ /* Adjust the BBPLL to 2 on all channels later. */ ++ buffer_strength = 0x222222; ++ break; ++ default: ++ SSB_WARN_ON(1); ++ } ++ for (i = 1500; i; i--) { ++ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST); ++ if (!(tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)) ++ break; ++ udelay(10); ++ } ++ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST); ++ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT) ++ ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n"); ++ ++ /* Set p1div and p2div. */ ++ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0); ++ pllctl &= ~(SSB_PMU1_PLLCTL0_P1DIV | SSB_PMU1_PLLCTL0_P2DIV); ++ pllctl |= ((u32)e->p1div << SSB_PMU1_PLLCTL0_P1DIV_SHIFT) & SSB_PMU1_PLLCTL0_P1DIV; ++ pllctl |= ((u32)e->p2div << SSB_PMU1_PLLCTL0_P2DIV_SHIFT) & SSB_PMU1_PLLCTL0_P2DIV; ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, pllctl); ++ ++ /* Set ndiv int and ndiv mode */ ++ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL2); ++ pllctl &= ~(SSB_PMU1_PLLCTL2_NDIVINT | SSB_PMU1_PLLCTL2_NDIVMODE); ++ pllctl |= ((u32)e->ndiv_int << SSB_PMU1_PLLCTL2_NDIVINT_SHIFT) & SSB_PMU1_PLLCTL2_NDIVINT; ++ pllctl |= (1 << SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT) & SSB_PMU1_PLLCTL2_NDIVMODE; ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, pllctl); ++ ++ /* Set ndiv frac */ ++ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL3); ++ pllctl &= ~SSB_PMU1_PLLCTL3_NDIVFRAC; ++ pllctl |= ((u32)e->ndiv_frac << SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT) & SSB_PMU1_PLLCTL3_NDIVFRAC; ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, pllctl); ++ ++ /* Change the drive strength, if required. */ ++ if (buffer_strength) { ++ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL5); ++ pllctl &= ~SSB_PMU1_PLLCTL5_CLKDRV; ++ pllctl |= (buffer_strength << SSB_PMU1_PLLCTL5_CLKDRV_SHIFT) & SSB_PMU1_PLLCTL5_CLKDRV; ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, pllctl); ++ } ++ ++ /* Tune the crystalfreq and the divisor. */ ++ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL); ++ pmuctl &= ~(SSB_CHIPCO_PMU_CTL_ILP_DIV | SSB_CHIPCO_PMU_CTL_XTALFREQ); ++ pmuctl |= ((((u32)e->freq + 127) / 128 - 1) << SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT) ++ & SSB_CHIPCO_PMU_CTL_ILP_DIV; ++ pmuctl |= ((u32)e->xf << SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) & SSB_CHIPCO_PMU_CTL_XTALFREQ; ++ chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl); ++} ++ ++static void ssb_pmu_pll_init(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */ ++ ++ if (bus->bustype == SSB_BUSTYPE_SSB) { ++ /* TODO: The user may override the crystal frequency. */ ++ } ++ ++ switch (bus->chip_id) { ++ case 0x4312: ++ case 0x4325: ++ ssb_pmu1_pllinit_r0(cc, crystalfreq); ++ break; ++ case 0x4328: ++ case 0x5354: ++ ssb_pmu0_pllinit_r0(cc, crystalfreq); ++ break; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PLL init unknown for device %04X\n", ++ bus->chip_id); ++ } ++} ++ ++struct pmu_res_updown_tab_entry { ++ u8 resource; /* The resource number */ ++ u16 updown; /* The updown value */ ++}; ++ ++enum pmu_res_depend_tab_task { ++ PMU_RES_DEP_SET = 1, ++ PMU_RES_DEP_ADD, ++ PMU_RES_DEP_REMOVE, ++}; ++ ++struct pmu_res_depend_tab_entry { ++ u8 resource; /* The resource number */ ++ u8 task; /* SET | ADD | REMOVE */ ++ u32 depend; /* The depend mask */ ++}; ++ ++static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4328a0[] = { ++ { .resource = SSB_PMURES_4328_EXT_SWITCHER_PWM, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_BB_SWITCHER_PWM, .updown = 0x1F01, }, ++ { .resource = SSB_PMURES_4328_BB_SWITCHER_BURST, .updown = 0x010F, }, ++ { .resource = SSB_PMURES_4328_BB_EXT_SWITCHER_BURST, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_ILP_REQUEST, .updown = 0x0202, }, ++ { .resource = SSB_PMURES_4328_RADIO_SWITCHER_PWM, .updown = 0x0F01, }, ++ { .resource = SSB_PMURES_4328_RADIO_SWITCHER_BURST, .updown = 0x0F01, }, ++ { .resource = SSB_PMURES_4328_ROM_SWITCH, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_PA_REF_LDO, .updown = 0x0F01, }, ++ { .resource = SSB_PMURES_4328_RADIO_LDO, .updown = 0x0F01, }, ++ { .resource = SSB_PMURES_4328_AFE_LDO, .updown = 0x0F01, }, ++ { .resource = SSB_PMURES_4328_PLL_LDO, .updown = 0x0F01, }, ++ { .resource = SSB_PMURES_4328_BG_FILTBYP, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_TX_FILTBYP, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_RX_FILTBYP, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_XTAL_PU, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_XTAL_EN, .updown = 0xA001, }, ++ { .resource = SSB_PMURES_4328_BB_PLL_FILTBYP, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_RF_PLL_FILTBYP, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_BB_PLL_PU, .updown = 0x0701, }, ++}; ++ ++static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4328a0[] = { ++ { ++ /* Adjust ILP Request to avoid forcing EXT/BB into burst mode. */ ++ .resource = SSB_PMURES_4328_ILP_REQUEST, ++ .task = PMU_RES_DEP_SET, ++ .depend = ((1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) | ++ (1 << SSB_PMURES_4328_BB_SWITCHER_PWM)), ++ }, ++}; ++ ++static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4325a0[] = { ++ { .resource = SSB_PMURES_4325_XTAL_PU, .updown = 0x1501, }, ++}; ++ ++static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4325a0[] = { ++ { ++ /* Adjust HT-Available dependencies. */ ++ .resource = SSB_PMURES_4325_HT_AVAIL, ++ .task = PMU_RES_DEP_ADD, ++ .depend = ((1 << SSB_PMURES_4325_RX_PWRSW_PU) | ++ (1 << SSB_PMURES_4325_TX_PWRSW_PU) | ++ (1 << SSB_PMURES_4325_LOGEN_PWRSW_PU) | ++ (1 << SSB_PMURES_4325_AFE_PWRSW_PU)), ++ }, ++}; ++ ++static void ssb_pmu_resources_init(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ u32 min_msk = 0, max_msk = 0; ++ unsigned int i; ++ const struct pmu_res_updown_tab_entry *updown_tab = NULL; ++ unsigned int updown_tab_size; ++ const struct pmu_res_depend_tab_entry *depend_tab = NULL; ++ unsigned int depend_tab_size; ++ ++ switch (bus->chip_id) { ++ case 0x4312: ++ /* We keep the default settings: ++ * min_msk = 0xCBB ++ * max_msk = 0x7FFFF ++ */ ++ break; ++ case 0x4325: ++ /* Power OTP down later. */ ++ min_msk = (1 << SSB_PMURES_4325_CBUCK_BURST) | ++ (1 << SSB_PMURES_4325_LNLDO2_PU); ++ if (chipco_read32(cc, SSB_CHIPCO_CHIPSTAT) & ++ SSB_CHIPCO_CHST_4325_PMUTOP_2B) ++ min_msk |= (1 << SSB_PMURES_4325_CLDO_CBUCK_BURST); ++ /* The PLL may turn on, if it decides so. */ ++ max_msk = 0xFFFFF; ++ updown_tab = pmu_res_updown_tab_4325a0; ++ updown_tab_size = ARRAY_SIZE(pmu_res_updown_tab_4325a0); ++ depend_tab = pmu_res_depend_tab_4325a0; ++ depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4325a0); ++ break; ++ case 0x4328: ++ min_msk = (1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) | ++ (1 << SSB_PMURES_4328_BB_SWITCHER_PWM) | ++ (1 << SSB_PMURES_4328_XTAL_EN); ++ /* The PLL may turn on, if it decides so. */ ++ max_msk = 0xFFFFF; ++ updown_tab = pmu_res_updown_tab_4328a0; ++ updown_tab_size = ARRAY_SIZE(pmu_res_updown_tab_4328a0); ++ depend_tab = pmu_res_depend_tab_4328a0; ++ depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4328a0); ++ break; ++ case 0x5354: ++ /* The PLL may turn on, if it decides so. */ ++ max_msk = 0xFFFFF; ++ break; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU resource config unknown for device %04X\n", ++ bus->chip_id); ++ } ++ ++ if (updown_tab) { ++ for (i = 0; i < updown_tab_size; i++) { ++ chipco_write32(cc, SSB_CHIPCO_PMU_RES_TABSEL, ++ updown_tab[i].resource); ++ chipco_write32(cc, SSB_CHIPCO_PMU_RES_UPDNTM, ++ updown_tab[i].updown); ++ } ++ } ++ if (depend_tab) { ++ for (i = 0; i < depend_tab_size; i++) { ++ chipco_write32(cc, SSB_CHIPCO_PMU_RES_TABSEL, ++ depend_tab[i].resource); ++ switch (depend_tab[i].task) { ++ case PMU_RES_DEP_SET: ++ chipco_write32(cc, SSB_CHIPCO_PMU_RES_DEPMSK, ++ depend_tab[i].depend); ++ break; ++ case PMU_RES_DEP_ADD: ++ chipco_set32(cc, SSB_CHIPCO_PMU_RES_DEPMSK, ++ depend_tab[i].depend); ++ break; ++ case PMU_RES_DEP_REMOVE: ++ chipco_mask32(cc, SSB_CHIPCO_PMU_RES_DEPMSK, ++ ~(depend_tab[i].depend)); ++ break; ++ default: ++ SSB_WARN_ON(1); ++ } ++ } ++ } ++ ++ /* Set the resource masks. */ ++ if (min_msk) ++ chipco_write32(cc, SSB_CHIPCO_PMU_MINRES_MSK, min_msk); ++ if (max_msk) ++ chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk); ++} ++ ++void ssb_pmu_init(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ u32 pmucap; ++ ++ if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU)) ++ return; ++ ++ pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP); ++ cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION); ++ ++ ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n", ++ cc->pmu.rev, pmucap); ++ ++ if (cc->pmu.rev >= 1) { ++ if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) { ++ chipco_mask32(cc, SSB_CHIPCO_PMU_CTL, ++ ~SSB_CHIPCO_PMU_CTL_NOILPONW); ++ } else { ++ chipco_set32(cc, SSB_CHIPCO_PMU_CTL, ++ SSB_CHIPCO_PMU_CTL_NOILPONW); ++ } ++ } ++ ssb_pmu_pll_init(cc); ++ ssb_pmu_resources_init(cc); ++} ++ ++void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc, ++ enum ssb_pmu_ldo_volt_id id, u32 voltage) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ u32 addr, shift, mask; ++ ++ switch (bus->chip_id) { ++ case 0x4328: ++ case 0x5354: ++ switch (id) { ++ case LDO_VOLT1: ++ addr = 2; ++ shift = 25; ++ mask = 0xF; ++ break; ++ case LDO_VOLT2: ++ addr = 3; ++ shift = 1; ++ mask = 0xF; ++ break; ++ case LDO_VOLT3: ++ addr = 3; ++ shift = 9; ++ mask = 0xF; ++ break; ++ case LDO_PAREF: ++ addr = 3; ++ shift = 17; ++ mask = 0x3F; ++ break; ++ default: ++ SSB_WARN_ON(1); ++ return; ++ } ++ break; ++ case 0x4312: ++ if (SSB_WARN_ON(id != LDO_PAREF)) ++ return; ++ addr = 0; ++ shift = 21; ++ mask = 0x3F; ++ break; ++ default: ++ return; ++ } ++ ++ ssb_chipco_regctl_maskset(cc, addr, ~(mask << shift), ++ (voltage & mask) << shift); ++} ++ ++void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ int ldo; ++ ++ switch (bus->chip_id) { ++ case 0x4312: ++ ldo = SSB_PMURES_4312_PA_REF_LDO; ++ break; ++ case 0x4328: ++ ldo = SSB_PMURES_4328_PA_REF_LDO; ++ break; ++ case 0x5354: ++ ldo = SSB_PMURES_5354_PA_REF_LDO; ++ break; ++ default: ++ return; ++ } ++ ++ if (on) ++ chipco_set32(cc, SSB_CHIPCO_PMU_MINRES_MSK, 1 << ldo); ++ else ++ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, ~(1 << ldo)); ++ chipco_read32(cc, SSB_CHIPCO_PMU_MINRES_MSK); //SPEC FIXME found via mmiotrace - dummy read? ++} ++ ++EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage); ++EXPORT_SYMBOL(ssb_pmu_set_ldo_paref); diff --git a/target/linux/generic-2.6/patches-2.6.28/976-ssb_update.patch b/target/linux/generic-2.6/patches-2.6.28/976-ssb_update.patch new file mode 100644 index 0000000..28b6728 --- /dev/null +++ b/target/linux/generic-2.6/patches-2.6.28/976-ssb_update.patch @@ -0,0 +1,1411 @@ +--- /dev/null ++++ b/drivers/ssb/driver_chipcommon_pmu.c +@@ -0,0 +1,602 @@ ++/* ++ * Sonics Silicon Backplane ++ * Broadcom ChipCommon Power Management Unit driver ++ * ++ * Copyright 2009, Michael Buesch <mb@bu3sch.de> ++ * Copyright 2007, Broadcom Corporation ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include <linux/ssb/ssb.h> ++#include <linux/ssb/ssb_regs.h> ++#include <linux/ssb/ssb_driver_chipcommon.h> ++#include <linux/delay.h> ++ ++#include "ssb_private.h" ++ ++static u32 ssb_chipco_pll_read(struct ssb_chipcommon *cc, u32 offset) ++{ ++ chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, offset); ++ return chipco_read32(cc, SSB_CHIPCO_PLLCTL_DATA); ++} ++ ++static void ssb_chipco_pll_write(struct ssb_chipcommon *cc, ++ u32 offset, u32 value) ++{ ++ chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, offset); ++ chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value); ++} ++ ++static void ssb_chipco_regctl_maskset(struct ssb_chipcommon *cc, ++ u32 offset, u32 mask, u32 set) ++{ ++ u32 value; ++ ++ chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR); ++ chipco_write32(cc, SSB_CHIPCO_REGCTL_ADDR, offset); ++ chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR); ++ value = chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA); ++ value &= mask; ++ value |= set; ++ chipco_write32(cc, SSB_CHIPCO_REGCTL_DATA, value); ++ chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA); ++} ++ ++struct pmu0_plltab_entry { ++ u16 freq; /* Crystal frequency in kHz.*/ ++ u8 xf; /* Crystal frequency value for PMU control */ ++ u8 wb_int; ++ u32 wb_frac; ++}; ++ ++static const struct pmu0_plltab_entry pmu0_plltab[] = { ++ { .freq = 12000, .xf = 1, .wb_int = 73, .wb_frac = 349525, }, ++ { .freq = 13000, .xf = 2, .wb_int = 67, .wb_frac = 725937, }, ++ { .freq = 14400, .xf = 3, .wb_int = 61, .wb_frac = 116508, }, ++ { .freq = 15360, .xf = 4, .wb_int = 57, .wb_frac = 305834, }, ++ { .freq = 16200, .xf = 5, .wb_int = 54, .wb_frac = 336579, }, ++ { .freq = 16800, .xf = 6, .wb_int = 52, .wb_frac = 399457, }, ++ { .freq = 19200, .xf = 7, .wb_int = 45, .wb_frac = 873813, }, ++ { .freq = 19800, .xf = 8, .wb_int = 44, .wb_frac = 466033, }, ++ { .freq = 20000, .xf = 9, .wb_int = 44, .wb_frac = 0, }, ++ { .freq = 25000, .xf = 10, .wb_int = 70, .wb_frac = 419430, }, ++ { .freq = 26000, .xf = 11, .wb_int = 67, .wb_frac = 725937, }, ++ { .freq = 30000, .xf = 12, .wb_int = 58, .wb_frac = 699050, }, ++ { .freq = 38400, .xf = 13, .wb_int = 45, .wb_frac = 873813, }, ++ { .freq = 40000, .xf = 14, .wb_int = 45, .wb_frac = 0, }, ++}; ++#define SSB_PMU0_DEFAULT_XTALFREQ 20000 ++ ++static const struct pmu0_plltab_entry * pmu0_plltab_find_entry(u32 crystalfreq) ++{ ++ const struct pmu0_plltab_entry *e; ++ unsigned int i; ++ ++ for (i = 0; i < ARRAY_SIZE(pmu0_plltab); i++) { ++ e = &pmu0_plltab[i]; ++ if (e->freq == crystalfreq) ++ return e; ++ } ++ ++ return NULL; ++} ++ ++/* Tune the PLL to the crystal speed. crystalfreq is in kHz. */ ++static void ssb_pmu0_pllinit_r0(struct ssb_chipcommon *cc, ++ u32 crystalfreq) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ const struct pmu0_plltab_entry *e = NULL; ++ u32 pmuctl, tmp, pllctl; ++ unsigned int i; ++ ++ if ((bus->chip_id == 0x5354) && !crystalfreq) { ++ /* The 5354 crystal freq is 25MHz */ ++ crystalfreq = 25000; ++ } ++ if (crystalfreq) ++ e = pmu0_plltab_find_entry(crystalfreq); ++ if (!e) ++ e = pmu0_plltab_find_entry(SSB_PMU0_DEFAULT_XTALFREQ); ++ BUG_ON(!e); ++ crystalfreq = e->freq; ++ cc->pmu.crystalfreq = e->freq; ++ ++ /* Check if the PLL already is programmed to this frequency. */ ++ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL); ++ if (((pmuctl & SSB_CHIPCO_PMU_CTL_XTALFREQ) >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) == e->xf) { ++ /* We're already there... */ ++ return; ++ } ++ ++ ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n", ++ (crystalfreq / 1000), (crystalfreq % 1000)); ++ ++ /* First turn the PLL off. */ ++ switch (bus->chip_id) { ++ case 0x4328: ++ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, ++ ~(1 << SSB_PMURES_4328_BB_PLL_PU)); ++ chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, ++ ~(1 << SSB_PMURES_4328_BB_PLL_PU)); ++ break; ++ case 0x5354: ++ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, ++ ~(1 << SSB_PMURES_5354_BB_PLL_PU)); ++ chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, ++ ~(1 << SSB_PMURES_5354_BB_PLL_PU)); ++ break; ++ default: ++ SSB_WARN_ON(1); ++ } ++ for (i = 1500; i; i--) { ++ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST); ++ if (!(tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)) ++ break; ++ udelay(10); ++ } ++ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST); ++ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT) ++ ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n"); ++ ++ /* Set PDIV in PLL control 0. */ ++ pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0); ++ if (crystalfreq >= SSB_PMU0_PLLCTL0_PDIV_FREQ) ++ pllctl |= SSB_PMU0_PLLCTL0_PDIV_MSK; ++ else ++ pllctl &= ~SSB_PMU0_PLLCTL0_PDIV_MSK; ++ ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL0, pllctl); ++ ++ /* Set WILD in PLL control 1. */ ++ pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL1); ++ pllctl &= ~SSB_PMU0_PLLCTL1_STOPMOD; ++ pllctl &= ~(SSB_PMU0_PLLCTL1_WILD_IMSK | SSB_PMU0_PLLCTL1_WILD_FMSK); ++ pllctl |= ((u32)e->wb_int << SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT) & SSB_PMU0_PLLCTL1_WILD_IMSK; ++ pllctl |= ((u32)e->wb_frac << SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT) & SSB_PMU0_PLLCTL1_WILD_FMSK; ++ if (e->wb_frac == 0) ++ pllctl |= SSB_PMU0_PLLCTL1_STOPMOD; ++ ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL1, pllctl); ++ ++ /* Set WILD in PLL control 2. */ ++ pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL2); ++ pllctl &= ~SSB_PMU0_PLLCTL2_WILD_IMSKHI; ++ pllctl |= (((u32)e->wb_int >> 4) << SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT) & SSB_PMU0_PLLCTL2_WILD_IMSKHI; ++ ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL2, pllctl); ++ ++ /* Set the crystalfrequency and the divisor. */ ++ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL); ++ pmuctl &= ~SSB_CHIPCO_PMU_CTL_ILP_DIV; ++ pmuctl |= (((crystalfreq + 127) / 128 - 1) << SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT) ++ & SSB_CHIPCO_PMU_CTL_ILP_DIV; ++ pmuctl &= ~SSB_CHIPCO_PMU_CTL_XTALFREQ; ++ pmuctl |= ((u32)e->xf << SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) & SSB_CHIPCO_PMU_CTL_XTALFREQ; ++ chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl); ++} ++ ++struct pmu1_plltab_entry { ++ u16 freq; /* Crystal frequency in kHz.*/ ++ u8 xf; /* Crystal frequency value for PMU control */ ++ u8 ndiv_int; ++ u32 ndiv_frac; ++ u8 p1div; ++ u8 p2div; ++}; ++ ++static const struct pmu1_plltab_entry pmu1_plltab[] = { ++ { .freq = 12000, .xf = 1, .p1div = 3, .p2div = 22, .ndiv_int = 0x9, .ndiv_frac = 0xFFFFEF, }, ++ { .freq = 13000, .xf = 2, .p1div = 1, .p2div = 6, .ndiv_int = 0xb, .ndiv_frac = 0x483483, }, ++ { .freq = 14400, .xf = 3, .p1div = 1, .p2div = 10, .ndiv_int = 0xa, .ndiv_frac = 0x1C71C7, }, ++ { .freq = 15360, .xf = 4, .p1div = 1, .p2div = 5, .ndiv_int = 0xb, .ndiv_frac = 0x755555, }, ++ { .freq = 16200, .xf = 5, .p1div = 1, .p2div = 10, .ndiv_int = 0x5, .ndiv_frac = 0x6E9E06, }, ++ { .freq = 16800, .xf = 6, .p1div = 1, .p2div = 10, .ndiv_int = 0x5, .ndiv_frac = 0x3CF3CF, }, ++ { .freq = 19200, .xf = 7, .p1div = 1, .p2div = 9, .ndiv_int = 0x5, .ndiv_frac = 0x17B425, }, ++ { .freq = 19800, .xf = 8, .p1div = 1, .p2div = 11, .ndiv_int = 0x4, .ndiv_frac = 0xA57EB, }, ++ { .freq = 20000, .xf = 9, .p1div = 1, .p2div = 11, .ndiv_int = 0x4, .ndiv_frac = 0, }, ++ { .freq = 24000, .xf = 10, .p1div = 3, .p2div = 11, .ndiv_int = 0xa, .ndiv_frac = 0, }, ++ { .freq = 25000, .xf = 11, .p1div = 5, .p2div = 16, .ndiv_int = 0xb, .ndiv_frac = 0, }, ++ { .freq = 26000, .xf = 12, .p1div = 1, .p2div = 2, .ndiv_int = 0x10, .ndiv_frac = 0xEC4EC4, }, ++ { .freq = 30000, .xf = 13, .p1div = 3, .p2div = 8, .ndiv_int = 0xb, .ndiv_frac = 0, }, ++ { .freq = 38400, .xf = 14, .p1div = 1, .p2div = 5, .ndiv_int = 0x4, .ndiv_frac = 0x955555, }, ++ { .freq = 40000, .xf = 15, .p1div = 1, .p2div = 2, .ndiv_int = 0xb, .ndiv_frac = 0, }, ++}; ++ ++#define SSB_PMU1_DEFAULT_XTALFREQ 15360 ++ ++static const struct pmu1_plltab_entry * pmu1_plltab_find_entry(u32 crystalfreq) ++{ ++ const struct pmu1_plltab_entry *e; ++ unsigned int i; ++ ++ for (i = 0; i < ARRAY_SIZE(pmu1_plltab); i++) { ++ e = &pmu1_plltab[i]; ++ if (e->freq == crystalfreq) ++ return e; ++ } ++ ++ return NULL; ++} ++ ++/* Tune the PLL to the crystal speed. crystalfreq is in kHz. */ ++static void ssb_pmu1_pllinit_r0(struct ssb_chipcommon *cc, ++ u32 crystalfreq) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ const struct pmu1_plltab_entry *e = NULL; ++ u32 buffer_strength = 0; ++ u32 tmp, pllctl, pmuctl; ++ unsigned int i; ++ ++ if (bus->chip_id == 0x4312) { ++ /* We do not touch the BCM4312 PLL and assume ++ * the default crystal settings work out-of-the-box. */ ++ cc->pmu.crystalfreq = 20000; ++ return; ++ } ++ ++ if (crystalfreq) ++ e = pmu1_plltab_find_entry(crystalfreq); ++ if (!e) ++ e = pmu1_plltab_find_entry(SSB_PMU1_DEFAULT_XTALFREQ); ++ BUG_ON(!e); ++ crystalfreq = e->freq; ++ cc->pmu.crystalfreq = e->freq; ++ ++ /* Check if the PLL already is programmed to this frequency. */ ++ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL); ++ if (((pmuctl & SSB_CHIPCO_PMU_CTL_XTALFREQ) >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) == e->xf) { ++ /* We're already there... */ ++ return; ++ } ++ ++ ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n", ++ (crystalfreq / 1000), (crystalfreq % 1000)); ++ ++ /* First turn the PLL off. */ ++ switch (bus->chip_id) { ++ case 0x4325: ++ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, ++ ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) | ++ (1 << SSB_PMURES_4325_HT_AVAIL))); ++ chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, ++ ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) | ++ (1 << SSB_PMURES_4325_HT_AVAIL))); ++ /* Adjust the BBPLL to 2 on all channels later. */ ++ buffer_strength = 0x222222; ++ break; ++ default: ++ SSB_WARN_ON(1); ++ } ++ for (i = 1500; i; i--) { ++ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST); ++ if (!(tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)) ++ break; ++ udelay(10); ++ } ++ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST); ++ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT) ++ ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n"); ++ ++ /* Set p1div and p2div. */ ++ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0); ++ pllctl &= ~(SSB_PMU1_PLLCTL0_P1DIV | SSB_PMU1_PLLCTL0_P2DIV); ++ pllctl |= ((u32)e->p1div << SSB_PMU1_PLLCTL0_P1DIV_SHIFT) & SSB_PMU1_PLLCTL0_P1DIV; ++ pllctl |= ((u32)e->p2div << SSB_PMU1_PLLCTL0_P2DIV_SHIFT) & SSB_PMU1_PLLCTL0_P2DIV; ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, pllctl); ++ ++ /* Set ndiv int and ndiv mode */ ++ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL2); ++ pllctl &= ~(SSB_PMU1_PLLCTL2_NDIVINT | SSB_PMU1_PLLCTL2_NDIVMODE); ++ pllctl |= ((u32)e->ndiv_int << SSB_PMU1_PLLCTL2_NDIVINT_SHIFT) & SSB_PMU1_PLLCTL2_NDIVINT; ++ pllctl |= (1 << SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT) & SSB_PMU1_PLLCTL2_NDIVMODE; ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, pllctl); ++ ++ /* Set ndiv frac */ ++ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL3); ++ pllctl &= ~SSB_PMU1_PLLCTL3_NDIVFRAC; ++ pllctl |= ((u32)e->ndiv_frac << SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT) & SSB_PMU1_PLLCTL3_NDIVFRAC; ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, pllctl); ++ ++ /* Change the drive strength, if required. */ ++ if (buffer_strength) { ++ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL5); ++ pllctl &= ~SSB_PMU1_PLLCTL5_CLKDRV; ++ pllctl |= (buffer_strength << SSB_PMU1_PLLCTL5_CLKDRV_SHIFT) & SSB_PMU1_PLLCTL5_CLKDRV; ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, pllctl); ++ } ++ ++ /* Tune the crystalfreq and the divisor. */ ++ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL); ++ pmuctl &= ~(SSB_CHIPCO_PMU_CTL_ILP_DIV | SSB_CHIPCO_PMU_CTL_XTALFREQ); ++ pmuctl |= ((((u32)e->freq + 127) / 128 - 1) << SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT) ++ & SSB_CHIPCO_PMU_CTL_ILP_DIV; ++ pmuctl |= ((u32)e->xf << SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) & SSB_CHIPCO_PMU_CTL_XTALFREQ; ++ chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl); ++} ++ ++static void ssb_pmu_pll_init(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */ ++ ++ if (bus->bustype == SSB_BUSTYPE_SSB) { ++ /* TODO: The user may override the crystal frequency. */ ++ } ++ ++ switch (bus->chip_id) { ++ case 0x4312: ++ case 0x4325: ++ ssb_pmu1_pllinit_r0(cc, crystalfreq); ++ break; ++ case 0x4328: ++ case 0x5354: ++ ssb_pmu0_pllinit_r0(cc, crystalfreq); ++ break; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PLL init unknown for device %04X\n", ++ bus->chip_id); ++ } ++} ++ ++struct pmu_res_updown_tab_entry { ++ u8 resource; /* The resource number */ ++ u16 updown; /* The updown value */ ++}; ++ ++enum pmu_res_depend_tab_task { ++ PMU_RES_DEP_SET = 1, ++ PMU_RES_DEP_ADD, ++ PMU_RES_DEP_REMOVE, ++}; ++ ++struct pmu_res_depend_tab_entry { ++ u8 resource; /* The resource number */ ++ u8 task; /* SET | ADD | REMOVE */ ++ u32 depend; /* The depend mask */ ++}; ++ ++static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4328a0[] = { ++ { .resource = SSB_PMURES_4328_EXT_SWITCHER_PWM, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_BB_SWITCHER_PWM, .updown = 0x1F01, }, ++ { .resource = SSB_PMURES_4328_BB_SWITCHER_BURST, .updown = 0x010F, }, ++ { .resource = SSB_PMURES_4328_BB_EXT_SWITCHER_BURST, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_ILP_REQUEST, .updown = 0x0202, }, ++ { .resource = SSB_PMURES_4328_RADIO_SWITCHER_PWM, .updown = 0x0F01, }, ++ { .resource = SSB_PMURES_4328_RADIO_SWITCHER_BURST, .updown = 0x0F01, }, ++ { .resource = SSB_PMURES_4328_ROM_SWITCH, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_PA_REF_LDO, .updown = 0x0F01, }, ++ { .resource = SSB_PMURES_4328_RADIO_LDO, .updown = 0x0F01, }, ++ { .resource = SSB_PMURES_4328_AFE_LDO, .updown = 0x0F01, }, ++ { .resource = SSB_PMURES_4328_PLL_LDO, .updown = 0x0F01, }, ++ { .resource = SSB_PMURES_4328_BG_FILTBYP, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_TX_FILTBYP, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_RX_FILTBYP, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_XTAL_PU, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_XTAL_EN, .updown = 0xA001, }, ++ { .resource = SSB_PMURES_4328_BB_PLL_FILTBYP, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_RF_PLL_FILTBYP, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_BB_PLL_PU, .updown = 0x0701, }, ++}; ++ ++static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4328a0[] = { ++ { ++ /* Adjust ILP Request to avoid forcing EXT/BB into burst mode. */ ++ .resource = SSB_PMURES_4328_ILP_REQUEST, ++ .task = PMU_RES_DEP_SET, ++ .depend = ((1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) | ++ (1 << SSB_PMURES_4328_BB_SWITCHER_PWM)), ++ }, ++}; ++ ++static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4325a0[] = { ++ { .resource = SSB_PMURES_4325_XTAL_PU, .updown = 0x1501, }, ++}; ++ ++static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4325a0[] = { ++ { ++ /* Adjust HT-Available dependencies. */ ++ .resource = SSB_PMURES_4325_HT_AVAIL, ++ .task = PMU_RES_DEP_ADD, ++ .depend = ((1 << SSB_PMURES_4325_RX_PWRSW_PU) | ++ (1 << SSB_PMURES_4325_TX_PWRSW_PU) | ++ (1 << SSB_PMURES_4325_LOGEN_PWRSW_PU) | ++ (1 << SSB_PMURES_4325_AFE_PWRSW_PU)), ++ }, ++}; ++ ++static void ssb_pmu_resources_init(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ u32 min_msk = 0, max_msk = 0; ++ unsigned int i; ++ const struct pmu_res_updown_tab_entry *updown_tab = NULL; ++ unsigned int updown_tab_size; ++ const struct pmu_res_depend_tab_entry *depend_tab = NULL; ++ unsigned int depend_tab_size; ++ ++ switch (bus->chip_id) { ++ case 0x4312: ++ /* We keep the default settings: ++ * min_msk = 0xCBB ++ * max_msk = 0x7FFFF ++ */ ++ break; ++ case 0x4325: ++ /* Power OTP down later. */ ++ min_msk = (1 << SSB_PMURES_4325_CBUCK_BURST) | ++ (1 << SSB_PMURES_4325_LNLDO2_PU); ++ if (chipco_read32(cc, SSB_CHIPCO_CHIPSTAT) & ++ SSB_CHIPCO_CHST_4325_PMUTOP_2B) ++ min_msk |= (1 << SSB_PMURES_4325_CLDO_CBUCK_BURST); ++ /* The PLL may turn on, if it decides so. */ ++ max_msk = 0xFFFFF; ++ updown_tab = pmu_res_updown_tab_4325a0; ++ updown_tab_size = ARRAY_SIZE(pmu_res_updown_tab_4325a0); ++ depend_tab = pmu_res_depend_tab_4325a0; ++ depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4325a0); ++ break; ++ case 0x4328: ++ min_msk = (1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) | ++ (1 << SSB_PMURES_4328_BB_SWITCHER_PWM) | ++ (1 << SSB_PMURES_4328_XTAL_EN); ++ /* The PLL may turn on, if it decides so. */ ++ max_msk = 0xFFFFF; ++ updown_tab = pmu_res_updown_tab_4328a0; ++ updown_tab_size = ARRAY_SIZE(pmu_res_updown_tab_4328a0); ++ depend_tab = pmu_res_depend_tab_4328a0; ++ depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4328a0); ++ break; ++ case 0x5354: ++ /* The PLL may turn on, if it decides so. */ ++ max_msk = 0xFFFFF; ++ break; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU resource config unknown for device %04X\n", ++ bus->chip_id); ++ } ++ ++ if (updown_tab) { ++ for (i = 0; i < updown_tab_size; i++) { ++ chipco_write32(cc, SSB_CHIPCO_PMU_RES_TABSEL, ++ updown_tab[i].resource); ++ chipco_write32(cc, SSB_CHIPCO_PMU_RES_UPDNTM, ++ updown_tab[i].updown); ++ } ++ } ++ if (depend_tab) { ++ for (i = 0; i < depend_tab_size; i++) { ++ chipco_write32(cc, SSB_CHIPCO_PMU_RES_TABSEL, ++ depend_tab[i].resource); ++ switch (depend_tab[i].task) { ++ case PMU_RES_DEP_SET: ++ chipco_write32(cc, SSB_CHIPCO_PMU_RES_DEPMSK, ++ depend_tab[i].depend); ++ break; ++ case PMU_RES_DEP_ADD: ++ chipco_set32(cc, SSB_CHIPCO_PMU_RES_DEPMSK, ++ depend_tab[i].depend); ++ break; ++ case PMU_RES_DEP_REMOVE: ++ chipco_mask32(cc, SSB_CHIPCO_PMU_RES_DEPMSK, ++ ~(depend_tab[i].depend)); ++ break; ++ default: ++ SSB_WARN_ON(1); ++ } ++ } ++ } ++ ++ /* Set the resource masks. */ ++ if (min_msk) ++ chipco_write32(cc, SSB_CHIPCO_PMU_MINRES_MSK, min_msk); ++ if (max_msk) ++ chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk); ++} ++ ++void ssb_pmu_init(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ u32 pmucap; ++ ++ if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU)) ++ return; ++ ++ pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP); ++ cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION); ++ ++ ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n", ++ cc->pmu.rev, pmucap); ++ ++ if (cc->pmu.rev >= 1) { ++ if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) { ++ chipco_mask32(cc, SSB_CHIPCO_PMU_CTL, ++ ~SSB_CHIPCO_PMU_CTL_NOILPONW); ++ } else { ++ chipco_set32(cc, SSB_CHIPCO_PMU_CTL, ++ SSB_CHIPCO_PMU_CTL_NOILPONW); ++ } ++ } ++ ssb_pmu_pll_init(cc); ++ ssb_pmu_resources_init(cc); ++} ++ ++void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc, ++ enum ssb_pmu_ldo_volt_id id, u32 voltage) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ u32 addr, shift, mask; ++ ++ switch (bus->chip_id) { ++ case 0x4328: ++ case 0x5354: ++ switch (id) { ++ case LDO_VOLT1: ++ addr = 2; ++ shift = 25; ++ mask = 0xF; ++ break; ++ case LDO_VOLT2: ++ addr = 3; ++ shift = 1; ++ mask = 0xF; ++ break; ++ case LDO_VOLT3: ++ addr = 3; ++ shift = 9; ++ mask = 0xF; ++ break; ++ case LDO_PAREF: ++ addr = 3; ++ shift = 17; ++ mask = 0x3F; ++ break; ++ default: ++ SSB_WARN_ON(1); ++ return; ++ } ++ break; ++ case 0x4312: ++ if (SSB_WARN_ON(id != LDO_PAREF)) ++ return; ++ addr = 0; ++ shift = 21; ++ mask = 0x3F; ++ break; ++ default: ++ return; ++ } ++ ++ ssb_chipco_regctl_maskset(cc, addr, ~(mask << shift), ++ (voltage & mask) << shift); ++} ++ ++void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ int ldo; ++ ++ switch (bus->chip_id) { ++ case 0x4312: ++ ldo = SSB_PMURES_4312_PA_REF_LDO; ++ break; ++ case 0x4328: ++ ldo = SSB_PMURES_4328_PA_REF_LDO; ++ break; ++ case 0x5354: ++ ldo = SSB_PMURES_5354_PA_REF_LDO; ++ break; ++ default: ++ return; ++ } ++ ++ if (on) ++ chipco_set32(cc, SSB_CHIPCO_PMU_MINRES_MSK, 1 << ldo); ++ else ++ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, ~(1 << ldo)); ++ chipco_read32(cc, SSB_CHIPCO_PMU_MINRES_MSK); //SPEC FIXME found via mmiotrace - dummy read? ++} ++ ++EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage); ++EXPORT_SYMBOL(ssb_pmu_set_ldo_paref); +--- a/drivers/ssb/Kconfig ++++ b/drivers/ssb/Kconfig +@@ -53,11 +53,11 @@ config SSB_B43_PCI_BRIDGE + + config SSB_PCMCIAHOST_POSSIBLE + bool +- depends on SSB && (PCMCIA = y || PCMCIA = SSB) && EXPERIMENTAL ++ depends on SSB && (PCMCIA = y || PCMCIA = SSB) + default y + + config SSB_PCMCIAHOST +- bool "Support for SSB on PCMCIA-bus host (EXPERIMENTAL)" ++ bool "Support for SSB on PCMCIA-bus host" + depends on SSB_PCMCIAHOST_POSSIBLE + select SSB_SPROM + help +@@ -107,14 +107,14 @@ config SSB_DRIVER_PCICORE + If unsure, say Y + + config SSB_PCICORE_HOSTMODE +- bool "Hostmode support for SSB PCI core (EXPERIMENTAL)" +- depends on SSB_DRIVER_PCICORE && SSB_DRIVER_MIPS && EXPERIMENTAL ++ bool "Hostmode support for SSB PCI core" ++ depends on SSB_DRIVER_PCICORE && SSB_DRIVER_MIPS + help + PCIcore hostmode operation (external PCI bus). + + config SSB_DRIVER_MIPS +- bool "SSB Broadcom MIPS core driver (EXPERIMENTAL)" +- depends on SSB && MIPS && EXPERIMENTAL ++ bool "SSB Broadcom MIPS core driver" ++ depends on SSB && MIPS + select SSB_SERIAL + help + Driver for the Sonics Silicon Backplane attached +@@ -126,11 +126,13 @@ config SSB_DRIVER_MIPS + config SSB_EMBEDDED + bool + depends on SSB_DRIVER_MIPS ++ select USB_EHCI_HCD_SSB if USB_EHCI_HCD ++ select USB_OHCI_HCD_SSB if USB_OHCI_HCD + default y + + config SSB_DRIVER_EXTIF +- bool "SSB Broadcom EXTIF core driver (EXPERIMENTAL)" +- depends on SSB_DRIVER_MIPS && EXPERIMENTAL ++ bool "SSB Broadcom EXTIF core driver" ++ depends on SSB_DRIVER_MIPS + help + Driver for the Sonics Silicon Backplane attached + Broadcom EXTIF core. +--- a/drivers/ssb/Makefile ++++ b/drivers/ssb/Makefile +@@ -9,6 +9,7 @@ ssb-$(CONFIG_SSB_PCMCIAHOST) += pcmcia. + + # built-in drivers + ssb-y += driver_chipcommon.o ++ssb-y += driver_chipcommon_pmu.o + ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o + ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o + ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o +--- a/drivers/ssb/b43_pci_bridge.c ++++ b/drivers/ssb/b43_pci_bridge.c +@@ -18,9 +18,11 @@ + + static const struct pci_device_id b43_pci_bridge_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4301) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4306) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4307) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4311) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4312) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4315) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4318) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) }, +@@ -29,6 +31,7 @@ static const struct pci_device_id b43_pc + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4325) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4328) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4329) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x432b) }, + { 0, }, + }; + MODULE_DEVICE_TABLE(pci, b43_pci_bridge_tbl); +--- a/drivers/ssb/main.c ++++ b/drivers/ssb/main.c +@@ -1359,8 +1359,10 @@ static int __init ssb_modinit(void) + ssb_buses_lock(); + err = ssb_attach_queued_buses(); + ssb_buses_unlock(); +- if (err) ++ if (err) { + bus_unregister(&ssb_bustype); ++ goto out; ++ } + + err = b43_pci_ssb_bridge_init(); + if (err) { +@@ -1376,7 +1378,7 @@ static int __init ssb_modinit(void) + /* don't fail SSB init because of this */ + err = 0; + } +- ++out: + return err; + } + /* ssb must be initialized after PCI but before the ssb drivers. +--- a/drivers/ssb/pci.c ++++ b/drivers/ssb/pci.c +@@ -169,8 +169,14 @@ err_pci: + /* Get the word-offset for a SSB_SPROM_XXX define. */ + #define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16)) + /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */ +-#define SPEX(_outvar, _offset, _mask, _shift) \ ++#define SPEX16(_outvar, _offset, _mask, _shift) \ + out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift)) ++#define SPEX32(_outvar, _offset, _mask, _shift) \ ++ out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \ ++ in[SPOFF(_offset)]) & (_mask)) >> (_shift)) ++#define SPEX(_outvar, _offset, _mask, _shift) \ ++ SPEX16(_outvar, _offset, _mask, _shift) ++ + + static inline u8 ssb_crc8(u8 crc, u8 data) + { +@@ -467,6 +473,96 @@ static void sprom_extract_r45(struct ssb + /* TODO - get remaining rev 4 stuff needed */ + } + ++static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) ++{ ++ int i; ++ u16 v; ++ ++ /* extract the MAC address */ ++ for (i = 0; i < 3; i++) { ++ v = in[SPOFF(SSB_SPROM8_IL0MAC) + i]; ++ *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); ++ } ++ SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0); ++ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0); ++ SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0); ++ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0); ++ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0); ++ SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A, ++ SSB_SPROM8_ANTAVAIL_A_SHIFT); ++ SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG, ++ SSB_SPROM8_ANTAVAIL_BG_SHIFT); ++ SPEX(maxpwr_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_MAXP_BG_MASK, 0); ++ SPEX(itssi_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_ITSSI_BG, ++ SSB_SPROM8_ITSSI_BG_SHIFT); ++ SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0); ++ SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A, ++ SSB_SPROM8_ITSSI_A_SHIFT); ++ SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0); ++ SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK, ++ SSB_SPROM8_MAXP_AL_SHIFT); ++ SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0); ++ SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1, ++ SSB_SPROM8_GPIOA_P1_SHIFT); ++ SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0); ++ SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3, ++ SSB_SPROM8_GPIOB_P3_SHIFT); ++ SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0); ++ SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G, ++ SSB_SPROM8_TRI5G_SHIFT); ++ SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0); ++ SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH, ++ SSB_SPROM8_TRI5GH_SHIFT); ++ SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0); ++ SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G, ++ SSB_SPROM8_RXPO5G_SHIFT); ++ SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0); ++ SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G, ++ SSB_SPROM8_RSSISMC2G_SHIFT); ++ SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G, ++ SSB_SPROM8_RSSISAV2G_SHIFT); ++ SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G, ++ SSB_SPROM8_BXA2G_SHIFT); ++ SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0); ++ SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G, ++ SSB_SPROM8_RSSISMC5G_SHIFT); ++ SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G, ++ SSB_SPROM8_RSSISAV5G_SHIFT); ++ SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G, ++ SSB_SPROM8_BXA5G_SHIFT); ++ SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0); ++ SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0); ++ SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0); ++ SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0); ++ SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0); ++ SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0); ++ SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0); ++ SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0); ++ SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0); ++ SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0); ++ SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0); ++ SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0); ++ SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0); ++ SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0); ++ SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0); ++ SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0); ++ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); ++ ++ /* Extract the antenna gain values. */ ++ SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, ++ SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT); ++ SPEX(antenna_gain.ghz24.a1, SSB_SPROM8_AGAIN01, ++ SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT); ++ SPEX(antenna_gain.ghz24.a2, SSB_SPROM8_AGAIN23, ++ SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT); ++ SPEX(antenna_gain.ghz24.a3, SSB_SPROM8_AGAIN23, ++ SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); ++ memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, ++ sizeof(out->antenna_gain.ghz5)); ++ ++ /* TODO - get remaining rev 8 stuff needed */ ++} ++ + static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out, + const u16 *in, u16 size) + { +@@ -487,15 +583,26 @@ static int sprom_extract(struct ssb_bus + out->revision = 4; + sprom_extract_r45(out, in); + } else { +- if (out->revision == 0) +- goto unsupported; +- if (out->revision >= 1 && out->revision <= 3) { ++ switch (out->revision) { ++ case 1: ++ case 2: ++ case 3: + sprom_extract_r123(out, in); +- } +- if (out->revision == 4 || out->revision == 5) ++ break; ++ case 4: ++ case 5: + sprom_extract_r45(out, in); +- if (out->revision > 5) +- goto unsupported; ++ break; ++ case 8: ++ sprom_extract_r8(out, in); ++ break; ++ default: ++ ssb_printk(KERN_WARNING PFX "Unsupported SPROM" ++ " revision %d detected. Will extract" ++ " v1\n", out->revision); ++ out->revision = 1; ++ sprom_extract_r123(out, in); ++ } + } + + if (out->boardflags_lo == 0xFFFF) +@@ -504,11 +611,6 @@ static int sprom_extract(struct ssb_bus + out->boardflags_hi = 0; /* per specs */ + + return 0; +-unsupported: +- ssb_printk(KERN_WARNING PFX "Unsupported SPROM revision %d " +- "detected. Will extract v1\n", out->revision); +- sprom_extract_r123(out, in); +- return 0; + } + + static int ssb_pci_sprom_get(struct ssb_bus *bus, +--- a/drivers/ssb/pcmcia.c ++++ b/drivers/ssb/pcmcia.c +@@ -583,7 +583,7 @@ static int ssb_pcmcia_sprom_write_all(st + ssb_printk("."); + err = ssb_pcmcia_sprom_write(bus, i, sprom[i]); + if (err) { +- ssb_printk("\n" KERN_NOTICE PFX ++ ssb_printk(KERN_NOTICE PFX + "Failed to write to SPROM.\n"); + failed = 1; + break; +@@ -591,7 +591,7 @@ static int ssb_pcmcia_sprom_write_all(st + } + err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS); + if (err) { +- ssb_printk("\n" KERN_NOTICE PFX ++ ssb_printk(KERN_NOTICE PFX + "Could not disable SPROM write access.\n"); + failed = 1; + } +@@ -678,7 +678,8 @@ int ssb_pcmcia_get_invariants(struct ssb + sprom->board_rev = tuple.TupleData[1]; + break; + case SSB_PCMCIA_CIS_PA: +- GOTO_ERROR_ON(tuple.TupleDataLen != 9, ++ GOTO_ERROR_ON((tuple.TupleDataLen != 9) && ++ (tuple.TupleDataLen != 10), + "pa tpl size"); + sprom->pa0b0 = tuple.TupleData[1] | + ((u16)tuple.TupleData[2] << 8); +@@ -718,7 +719,8 @@ int ssb_pcmcia_get_invariants(struct ssb + sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1]; + break; + case SSB_PCMCIA_CIS_BFLAGS: +- GOTO_ERROR_ON(tuple.TupleDataLen != 3, ++ GOTO_ERROR_ON((tuple.TupleDataLen != 3) && ++ (tuple.TupleDataLen != 5), + "bfl tpl size"); + sprom->boardflags_lo = tuple.TupleData[1] | + ((u16)tuple.TupleData[2] << 8); +--- a/include/linux/ssb/ssb.h ++++ b/include/linux/ssb/ssb.h +@@ -27,24 +27,54 @@ struct ssb_sprom { + u8 et1mdcport; /* MDIO for enet1 */ + u8 board_rev; /* Board revision number from SPROM. */ + u8 country_code; /* Country Code */ +- u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */ +- u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */ ++ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ ++ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ + u16 pa0b0; + u16 pa0b1; + u16 pa0b2; + u16 pa1b0; + u16 pa1b1; + u16 pa1b2; ++ u16 pa1lob0; ++ u16 pa1lob1; ++ u16 pa1lob2; ++ u16 pa1hib0; ++ u16 pa1hib1; ++ u16 pa1hib2; + u8 gpio0; /* GPIO pin 0 */ + u8 gpio1; /* GPIO pin 1 */ + u8 gpio2; /* GPIO pin 2 */ + u8 gpio3; /* GPIO pin 3 */ +- u16 maxpwr_a; /* A-PHY Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_bg; /* B/G-PHY Amplifier Max Power (in dBm Q5.2) */ ++ u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ ++ u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ ++ u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ ++ u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ + u8 itssi_a; /* Idle TSSI Target for A-PHY */ + u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ +- u16 boardflags_lo; /* Boardflags (low 16 bits) */ +- u16 boardflags_hi; /* Boardflags (high 16 bits) */ ++ u8 tri2g; /* 2.4GHz TX isolation */ ++ u8 tri5gl; /* 5.2GHz TX isolation */ ++ u8 tri5g; /* 5.3GHz TX isolation */ ++ u8 tri5gh; /* 5.8GHz TX isolation */ ++ u8 rxpo2g; /* 2GHz RX power offset */ ++ u8 rxpo5g; /* 5GHz RX power offset */ ++ u8 rssisav2g; /* 2GHz RSSI params */ ++ u8 rssismc2g; ++ u8 rssismf2g; ++ u8 bxa2g; /* 2GHz BX arch */ ++ u8 rssisav5g; /* 5GHz RSSI params */ ++ u8 rssismc5g; ++ u8 rssismf5g; ++ u8 bxa5g; /* 5GHz BX arch */ ++ u16 cck2gpo; /* CCK power offset */ ++ u32 ofdm2gpo; /* 2.4GHz OFDM power offset */ ++ u32 ofdm5glpo; /* 5.2GHz OFDM power offset */ ++ u32 ofdm5gpo; /* 5.3GHz OFDM power offset */ ++ u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */ ++ u16 boardflags_lo; /* Board flags (bits 0-15) */ ++ u16 boardflags_hi; /* Board flags (bits 16-31) */ ++ u16 boardflags2_lo; /* Board flags (bits 32-47) */ ++ u16 boardflags2_hi; /* Board flags (bits 48-63) */ ++ /* TODO store board flags in a single u64 */ + + /* Antenna gain values for up to 4 antennas + * on each band. Values in dBm/4 (Q5.2). Negative gain means the +@@ -58,7 +88,7 @@ struct ssb_sprom { + } ghz5; /* 5GHz band */ + } antenna_gain; + +- /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */ ++ /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ + }; + + /* Information about the PCB the circuitry is soldered on. */ +@@ -208,6 +238,7 @@ enum ssb_bustype { + SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */ + SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */ + SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */ ++ SSB_BUSTYPE_SDIO, /* SSB is connected to SDIO bus */ + }; + + /* board_vendor */ +@@ -240,8 +271,12 @@ struct ssb_bus { + + /* The core in the basic address register window. (PCI bus only) */ + struct ssb_device *mapped_device; +- /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ +- u8 mapped_pcmcia_seg; ++ union { ++ /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ ++ u8 mapped_pcmcia_seg; ++ /* Current SSB base address window for SDIO. */ ++ u32 sdio_sbaddr; ++ }; + /* Lock for core and segment switching. + * On PCMCIA-host busses this is used to protect the whole MMIO access. */ + spinlock_t bar_lock; +@@ -252,6 +287,11 @@ struct ssb_bus { + struct pci_dev *host_pci; + /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */ + struct pcmcia_device *host_pcmcia; ++ /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */ ++ struct sdio_func *host_sdio; ++ ++ /* See enum ssb_quirks */ ++ unsigned int quirks; + + #ifdef CONFIG_SSB_SPROM + /* Mutex to protect the SPROM writing. */ +@@ -306,6 +346,11 @@ struct ssb_bus { + #endif /* DEBUG */ + }; + ++enum ssb_quirks { ++ /* SDIO connected card requires performing a read after writing a 32-bit value */ ++ SSB_QUIRK_SDIO_READ_AFTER_WRITE32 = (1 << 0), ++}; ++ + /* The initialization-invariants. */ + struct ssb_init_invariants { + /* Versioning information about the PCB. */ +--- a/include/linux/ssb/ssb_driver_chipcommon.h ++++ b/include/linux/ssb/ssb_driver_chipcommon.h +@@ -181,6 +181,16 @@ + #define SSB_CHIPCO_PROG_WAITCNT 0x0124 + #define SSB_CHIPCO_FLASH_CFG 0x0128 + #define SSB_CHIPCO_FLASH_WAITCNT 0x012C ++#define SSB_CHIPCO_CLKCTLST 0x01E0 /* Clock control and status (rev >= 20) */ ++#define SSB_CHIPCO_CLKCTLST_FORCEALP 0x00000001 /* Force ALP request */ ++#define SSB_CHIPCO_CLKCTLST_FORCEHT 0x00000002 /* Force HT request */ ++#define SSB_CHIPCO_CLKCTLST_FORCEILP 0x00000004 /* Force ILP request */ ++#define SSB_CHIPCO_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */ ++#define SSB_CHIPCO_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */ ++#define SSB_CHIPCO_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */ ++#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00010000 /* HT available */ ++#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00020000 /* APL available */ ++#define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ + #define SSB_CHIPCO_UART0_DATA 0x0300 + #define SSB_CHIPCO_UART0_IMR 0x0304 + #define SSB_CHIPCO_UART0_FCR 0x0308 +@@ -197,6 +207,196 @@ + #define SSB_CHIPCO_UART1_LSR 0x0414 + #define SSB_CHIPCO_UART1_MSR 0x0418 + #define SSB_CHIPCO_UART1_SCRATCH 0x041C ++/* PMU registers (rev >= 20) */ ++#define SSB_CHIPCO_PMU_CTL 0x0600 /* PMU control */ ++#define SSB_CHIPCO_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ ++#define SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT 16 ++#define SSB_CHIPCO_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ ++#define SSB_CHIPCO_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ ++#define SSB_CHIPCO_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ ++#define SSB_CHIPCO_PMU_CTL_XTALFREQ 0x0000007C /* Crystal freq */ ++#define SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT 2 ++#define SSB_CHIPCO_PMU_CTL_ILPDIVEN 0x00000002 /* ILP div enable */ ++#define SSB_CHIPCO_PMU_CTL_LPOSEL 0x00000001 /* LPO sel */ ++#define SSB_CHIPCO_PMU_CAP 0x0604 /* PMU capabilities */ ++#define SSB_CHIPCO_PMU_CAP_REVISION 0x000000FF /* Revision mask */ ++#define SSB_CHIPCO_PMU_STAT 0x0608 /* PMU status */ ++#define SSB_CHIPCO_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */ ++#define SSB_CHIPCO_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */ ++#define SSB_CHIPCO_PMU_STAT_HAVEALP 0x00000008 /* ALP available */ ++#define SSB_CHIPCO_PMU_STAT_HAVEHT 0x00000004 /* HT available */ ++#define SSB_CHIPCO_PMU_STAT_RESINIT 0x00000003 /* Res init */ ++#define SSB_CHIPCO_PMU_RES_STAT 0x060C /* PMU res status */ ++#define SSB_CHIPCO_PMU_RES_PEND 0x0610 /* PMU res pending */ ++#define SSB_CHIPCO_PMU_TIMER 0x0614 /* PMU timer */ ++#define SSB_CHIPCO_PMU_MINRES_MSK 0x0618 /* PMU min res mask */ ++#define SSB_CHIPCO_PMU_MAXRES_MSK 0x061C /* PMU max res mask */ ++#define SSB_CHIPCO_PMU_RES_TABSEL 0x0620 /* PMU res table sel */ ++#define SSB_CHIPCO_PMU_RES_DEPMSK 0x0624 /* PMU res dep mask */ ++#define SSB_CHIPCO_PMU_RES_UPDNTM 0x0628 /* PMU res updown timer */ ++#define SSB_CHIPCO_PMU_RES_TIMER 0x062C /* PMU res timer */ ++#define SSB_CHIPCO_PMU_CLKSTRETCH 0x0630 /* PMU clockstretch */ ++#define SSB_CHIPCO_PMU_WATCHDOG 0x0634 /* PMU watchdog */ ++#define SSB_CHIPCO_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */ ++#define SSB_CHIPCO_PMU_RES_REQT 0x0644 /* PMU res req timer */ ++#define SSB_CHIPCO_PMU_RES_REQM 0x0648 /* PMU res req mask */ ++#define SSB_CHIPCO_CHIPCTL_ADDR 0x0650 ++#define SSB_CHIPCO_CHIPCTL_DATA 0x0654 ++#define SSB_CHIPCO_REGCTL_ADDR 0x0658 ++#define SSB_CHIPCO_REGCTL_DATA 0x065C ++#define SSB_CHIPCO_PLLCTL_ADDR 0x0660 ++#define SSB_CHIPCO_PLLCTL_DATA 0x0664 ++ ++ ++ ++/** PMU PLL registers */ ++ ++/* PMU rev 0 PLL registers */ ++#define SSB_PMU0_PLLCTL0 0 ++#define SSB_PMU0_PLLCTL0_PDIV_MSK 0x00000001 ++#define SSB_PMU0_PLLCTL0_PDIV_FREQ 25000 /* kHz */ ++#define SSB_PMU0_PLLCTL1 1 ++#define SSB_PMU0_PLLCTL1_WILD_IMSK 0xF0000000 /* Wild int mask (low nibble) */ ++#define SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT 28 ++#define SSB_PMU0_PLLCTL1_WILD_FMSK 0x0FFFFF00 /* Wild frac mask */ ++#define SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT 8 ++#define SSB_PMU0_PLLCTL1_STOPMOD 0x00000040 /* Stop mod */ ++#define SSB_PMU0_PLLCTL2 2 ++#define SSB_PMU0_PLLCTL2_WILD_IMSKHI 0x0000000F /* Wild int mask (high nibble) */ ++#define SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT 0 ++ ++/* PMU rev 1 PLL registers */ ++#define SSB_PMU1_PLLCTL0 0 ++#define SSB_PMU1_PLLCTL0_P1DIV 0x00F00000 /* P1 div */ ++#define SSB_PMU1_PLLCTL0_P1DIV_SHIFT 20 ++#define SSB_PMU1_PLLCTL0_P2DIV 0x0F000000 /* P2 div */ ++#define SSB_PMU1_PLLCTL0_P2DIV_SHIFT 24 ++#define SSB_PMU1_PLLCTL1 1 ++#define SSB_PMU1_PLLCTL1_M1DIV 0x000000FF /* M1 div */ ++#define SSB_PMU1_PLLCTL1_M1DIV_SHIFT 0 ++#define SSB_PMU1_PLLCTL1_M2DIV 0x0000FF00 /* M2 div */ ++#define SSB_PMU1_PLLCTL1_M2DIV_SHIFT 8 ++#define SSB_PMU1_PLLCTL1_M3DIV 0x00FF0000 /* M3 div */ ++#define SSB_PMU1_PLLCTL1_M3DIV_SHIFT 16 ++#define SSB_PMU1_PLLCTL1_M4DIV 0xFF000000 /* M4 div */ ++#define SSB_PMU1_PLLCTL1_M4DIV_SHIFT 24 ++#define SSB_PMU1_PLLCTL2 2 ++#define SSB_PMU1_PLLCTL2_M5DIV 0x000000FF /* M5 div */ ++#define SSB_PMU1_PLLCTL2_M5DIV_SHIFT 0 ++#define SSB_PMU1_PLLCTL2_M6DIV 0x0000FF00 /* M6 div */ ++#define SSB_PMU1_PLLCTL2_M6DIV_SHIFT 8 ++#define SSB_PMU1_PLLCTL2_NDIVMODE 0x000E0000 /* NDIV mode */ ++#define SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT 17 ++#define SSB_PMU1_PLLCTL2_NDIVINT 0x1FF00000 /* NDIV int */ ++#define SSB_PMU1_PLLCTL2_NDIVINT_SHIFT 20 ++#define SSB_PMU1_PLLCTL3 3 ++#define SSB_PMU1_PLLCTL3_NDIVFRAC 0x00FFFFFF /* NDIV frac */ ++#define SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT 0 ++#define SSB_PMU1_PLLCTL4 4 ++#define SSB_PMU1_PLLCTL5 5 ++#define SSB_PMU1_PLLCTL5_CLKDRV 0xFFFFFF00 /* clk drv */ ++#define SSB_PMU1_PLLCTL5_CLKDRV_SHIFT 8 ++ ++/* BCM4312 PLL resource numbers. */ ++#define SSB_PMURES_4312_SWITCHER_BURST 0 ++#define SSB_PMURES_4312_SWITCHER_PWM 1 ++#define SSB_PMURES_4312_PA_REF_LDO 2 ++#define SSB_PMURES_4312_CORE_LDO_BURST 3 ++#define SSB_PMURES_4312_CORE_LDO_PWM 4 ++#define SSB_PMURES_4312_RADIO_LDO 5 ++#define SSB_PMURES_4312_ILP_REQUEST 6 ++#define SSB_PMURES_4312_BG_FILTBYP 7 ++#define SSB_PMURES_4312_TX_FILTBYP 8 ++#define SSB_PMURES_4312_RX_FILTBYP 9 ++#define SSB_PMURES_4312_XTAL_PU 10 ++#define SSB_PMURES_4312_ALP_AVAIL 11 ++#define SSB_PMURES_4312_BB_PLL_FILTBYP 12 ++#define SSB_PMURES_4312_RF_PLL_FILTBYP 13 ++#define SSB_PMURES_4312_HT_AVAIL 14 ++ ++/* BCM4325 PLL resource numbers. */ ++#define SSB_PMURES_4325_BUCK_BOOST_BURST 0 ++#define SSB_PMURES_4325_CBUCK_BURST 1 ++#define SSB_PMURES_4325_CBUCK_PWM 2 ++#define SSB_PMURES_4325_CLDO_CBUCK_BURST 3 ++#define SSB_PMURES_4325_CLDO_CBUCK_PWM 4 ++#define SSB_PMURES_4325_BUCK_BOOST_PWM 5 ++#define SSB_PMURES_4325_ILP_REQUEST 6 ++#define SSB_PMURES_4325_ABUCK_BURST 7 ++#define SSB_PMURES_4325_ABUCK_PWM 8 ++#define SSB_PMURES_4325_LNLDO1_PU 9 ++#define SSB_PMURES_4325_LNLDO2_PU 10 ++#define SSB_PMURES_4325_LNLDO3_PU 11 ++#define SSB_PMURES_4325_LNLDO4_PU 12 ++#define SSB_PMURES_4325_XTAL_PU 13 ++#define SSB_PMURES_4325_ALP_AVAIL 14 ++#define SSB_PMURES_4325_RX_PWRSW_PU 15 ++#define SSB_PMURES_4325_TX_PWRSW_PU 16 ++#define SSB_PMURES_4325_RFPLL_PWRSW_PU 17 ++#define SSB_PMURES_4325_LOGEN_PWRSW_PU 18 ++#define SSB_PMURES_4325_AFE_PWRSW_PU 19 ++#define SSB_PMURES_4325_BBPLL_PWRSW_PU 20 ++#define SSB_PMURES_4325_HT_AVAIL 21 ++ ++/* BCM4328 PLL resource numbers. */ ++#define SSB_PMURES_4328_EXT_SWITCHER_PWM 0 ++#define SSB_PMURES_4328_BB_SWITCHER_PWM 1 ++#define SSB_PMURES_4328_BB_SWITCHER_BURST 2 ++#define SSB_PMURES_4328_BB_EXT_SWITCHER_BURST 3 ++#define SSB_PMURES_4328_ILP_REQUEST 4 ++#define SSB_PMURES_4328_RADIO_SWITCHER_PWM 5 ++#define SSB_PMURES_4328_RADIO_SWITCHER_BURST 6 ++#define SSB_PMURES_4328_ROM_SWITCH 7 ++#define SSB_PMURES_4328_PA_REF_LDO 8 ++#define SSB_PMURES_4328_RADIO_LDO 9 ++#define SSB_PMURES_4328_AFE_LDO 10 ++#define SSB_PMURES_4328_PLL_LDO 11 ++#define SSB_PMURES_4328_BG_FILTBYP 12 ++#define SSB_PMURES_4328_TX_FILTBYP 13 ++#define SSB_PMURES_4328_RX_FILTBYP 14 ++#define SSB_PMURES_4328_XTAL_PU 15 ++#define SSB_PMURES_4328_XTAL_EN 16 ++#define SSB_PMURES_4328_BB_PLL_FILTBYP 17 ++#define SSB_PMURES_4328_RF_PLL_FILTBYP 18 ++#define SSB_PMURES_4328_BB_PLL_PU 19 ++ ++/* BCM5354 PLL resource numbers. */ ++#define SSB_PMURES_5354_EXT_SWITCHER_PWM 0 ++#define SSB_PMURES_5354_BB_SWITCHER_PWM 1 ++#define SSB_PMURES_5354_BB_SWITCHER_BURST 2 ++#define SSB_PMURES_5354_BB_EXT_SWITCHER_BURST 3 ++#define SSB_PMURES_5354_ILP_REQUEST 4 ++#define SSB_PMURES_5354_RADIO_SWITCHER_PWM 5 ++#define SSB_PMURES_5354_RADIO_SWITCHER_BURST 6 ++#define SSB_PMURES_5354_ROM_SWITCH 7 ++#define SSB_PMURES_5354_PA_REF_LDO 8 ++#define SSB_PMURES_5354_RADIO_LDO 9 ++#define SSB_PMURES_5354_AFE_LDO 10 ++#define SSB_PMURES_5354_PLL_LDO 11 ++#define SSB_PMURES_5354_BG_FILTBYP 12 ++#define SSB_PMURES_5354_TX_FILTBYP 13 ++#define SSB_PMURES_5354_RX_FILTBYP 14 ++#define SSB_PMURES_5354_XTAL_PU 15 ++#define SSB_PMURES_5354_XTAL_EN 16 ++#define SSB_PMURES_5354_BB_PLL_FILTBYP 17 ++#define SSB_PMURES_5354_RF_PLL_FILTBYP 18 ++#define SSB_PMURES_5354_BB_PLL_PU 19 ++ ++ ++ ++/** Chip specific Chip-Status register contents. */ ++#define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003 ++#define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */ ++#define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */ ++#define SSB_CHIPCO_CHST_4325_OTP_SEL 2 /* OTP is powered up, no SPROM */ ++#define SSB_CHIPCO_CHST_4325_OTP_PWRDN 3 /* OTP is powered down, SPROM is present */ ++#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE 0x00000004 ++#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE_SHIFT 2 ++#define SSB_CHIPCO_CHST_4325_RCAL_VALID 0x00000008 ++#define SSB_CHIPCO_CHST_4325_RCAL_VALID_SHIFT 3 ++#define SSB_CHIPCO_CHST_4325_RCAL_VALUE 0x000001F0 ++#define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4 ++#define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */ + + + +@@ -353,11 +553,20 @@ + struct ssb_device; + struct ssb_serial_port; + ++/* Data for the PMU, if available. ++ * Check availability with ((struct ssb_chipcommon)->capabilities & SSB_CHIPCO_CAP_PMU) ++ */ ++struct ssb_chipcommon_pmu { ++ u8 rev; /* PMU revision */ ++ u32 crystalfreq; /* The active crystal frequency (in kHz) */ ++}; ++ + struct ssb_chipcommon { + struct ssb_device *dev; + u32 capabilities; + /* Fast Powerup Delay constant */ + u16 fast_pwrup_delay; ++ struct ssb_chipcommon_pmu pmu; + }; + + static inline bool ssb_chipco_available(struct ssb_chipcommon *cc) +@@ -365,6 +574,17 @@ static inline bool ssb_chipco_available( + return (cc->dev != NULL); + } + ++/* Register access */ ++#define chipco_read32(cc, offset) ssb_read32((cc)->dev, offset) ++#define chipco_write32(cc, offset, val) ssb_write32((cc)->dev, offset, val) ++ ++#define chipco_mask32(cc, offset, mask) \ ++ chipco_write32(cc, offset, chipco_read32(cc, offset) & (mask)) ++#define chipco_set32(cc, offset, set) \ ++ chipco_write32(cc, offset, chipco_read32(cc, offset) | (set)) ++#define chipco_maskset32(cc, offset, mask, set) \ ++ chipco_write32(cc, offset, (chipco_read32(cc, offset) & (mask)) | (set)) ++ + extern void ssb_chipcommon_init(struct ssb_chipcommon *cc); + + extern void ssb_chipco_suspend(struct ssb_chipcommon *cc); +@@ -406,4 +626,18 @@ extern int ssb_chipco_serial_init(struct + struct ssb_serial_port *ports); + #endif /* CONFIG_SSB_SERIAL */ + ++/* PMU support */ ++extern void ssb_pmu_init(struct ssb_chipcommon *cc); ++ ++enum ssb_pmu_ldo_volt_id { ++ LDO_PAREF = 0, ++ LDO_VOLT1, ++ LDO_VOLT2, ++ LDO_VOLT3, ++}; ++ ++void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc, ++ enum ssb_pmu_ldo_volt_id id, u32 voltage); ++void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on); ++ + #endif /* LINUX_SSB_CHIPCO_H_ */ +--- a/include/linux/ssb/ssb_regs.h ++++ b/include/linux/ssb/ssb_regs.h +@@ -162,7 +162,7 @@ + + /* SPROM shadow area. If not otherwise noted, fields are + * two bytes wide. Note that the SPROM can _only_ be read +- * in two-byte quantinies. ++ * in two-byte quantities. + */ + #define SSB_SPROMSIZE_WORDS 64 + #define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16)) +@@ -326,6 +326,94 @@ + #define SSB_SPROM5_GPIOB_P3 0xFF00 /* Pin 3 */ + #define SSB_SPROM5_GPIOB_P3_SHIFT 8 + ++/* SPROM Revision 8 */ ++#define SSB_SPROM8_BOARDREV 0x1082 /* Board revision */ ++#define SSB_SPROM8_BFLLO 0x1084 /* Board flags (bits 0-15) */ ++#define SSB_SPROM8_BFLHI 0x1086 /* Board flags (bits 16-31) */ ++#define SSB_SPROM8_BFL2LO 0x1088 /* Board flags (bits 32-47) */ ++#define SSB_SPROM8_BFL2HI 0x108A /* Board flags (bits 48-63) */ ++#define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */ ++#define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */ ++#define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/ ++#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ ++#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 ++#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */ ++#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0 ++#define SSB_SPROM8_AGAIN01 0x109E /* Antenna Gain (in dBm Q5.2) */ ++#define SSB_SPROM8_AGAIN0 0x00FF /* Antenna 0 */ ++#define SSB_SPROM8_AGAIN0_SHIFT 0 ++#define SSB_SPROM8_AGAIN1 0xFF00 /* Antenna 1 */ ++#define SSB_SPROM8_AGAIN1_SHIFT 8 ++#define SSB_SPROM8_AGAIN23 0x10A0 ++#define SSB_SPROM8_AGAIN2 0x00FF /* Antenna 2 */ ++#define SSB_SPROM8_AGAIN2_SHIFT 0 ++#define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */ ++#define SSB_SPROM8_AGAIN3_SHIFT 8 ++#define SSB_SPROM8_GPIOA 0x1096 /*Gen. Purpose IO # 0 and 1 */ ++#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */ ++#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */ ++#define SSB_SPROM8_GPIOA_P1_SHIFT 8 ++#define SSB_SPROM8_GPIOB 0x1098 /* Gen. Purpose IO # 2 and 3 */ ++#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ ++#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ ++#define SSB_SPROM8_GPIOB_P3_SHIFT 8 ++#define SSB_SPROM8_RSSIPARM2G 0x10A4 /* RSSI params for 2GHz */ ++#define SSB_SPROM8_RSSISMF2G 0x000F ++#define SSB_SPROM8_RSSISMC2G 0x00F0 ++#define SSB_SPROM8_RSSISMC2G_SHIFT 4 ++#define SSB_SPROM8_RSSISAV2G 0x0700 ++#define SSB_SPROM8_RSSISAV2G_SHIFT 8 ++#define SSB_SPROM8_BXA2G 0x1800 ++#define SSB_SPROM8_BXA2G_SHIFT 11 ++#define SSB_SPROM8_RSSIPARM5G 0x10A6 /* RSSI params for 5GHz */ ++#define SSB_SPROM8_RSSISMF5G 0x000F ++#define SSB_SPROM8_RSSISMC5G 0x00F0 ++#define SSB_SPROM8_RSSISMC5G_SHIFT 4 ++#define SSB_SPROM8_RSSISAV5G 0x0700 ++#define SSB_SPROM8_RSSISAV5G_SHIFT 8 ++#define SSB_SPROM8_BXA5G 0x1800 ++#define SSB_SPROM8_BXA5G_SHIFT 11 ++#define SSB_SPROM8_TRI25G 0x10A8 /* TX isolation 2.4&5.3GHz */ ++#define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */ ++#define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */ ++#define SSB_SPROM8_TRI5G_SHIFT 8 ++#define SSB_SPROM8_TRI5GHL 0x10AA /* TX isolation 5.2/5.8GHz */ ++#define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */ ++#define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */ ++#define SSB_SPROM8_TRI5GH_SHIFT 8 ++#define SSB_SPROM8_RXPO 0x10AC /* RX power offsets */ ++#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ ++#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ ++#define SSB_SPROM8_RXPO5G_SHIFT 8 ++#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power 2GHz in path 1 */ ++#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ ++#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ ++#define SSB_SPROM8_ITSSI_BG_SHIFT 8 ++#define SSB_SPROM8_PA0B0 0x10C2 /* 2GHz power amp settings */ ++#define SSB_SPROM8_PA0B1 0x10C4 ++#define SSB_SPROM8_PA0B2 0x10C6 ++#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power 5.3GHz */ ++#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */ ++#define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ ++#define SSB_SPROM8_ITSSI_A_SHIFT 8 ++#define SSB_SPROM8_MAXP_AHL 0x10CA /* Max Power 5.2/5.8GHz */ ++#define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */ ++#define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */ ++#define SSB_SPROM8_MAXP_AL_SHIFT 8 ++#define SSB_SPROM8_PA1B0 0x10CC /* 5.3GHz power amp settings */ ++#define SSB_SPROM8_PA1B1 0x10CE ++#define SSB_SPROM8_PA1B2 0x10D0 ++#define SSB_SPROM8_PA1LOB0 0x10D2 /* 5.2GHz power amp settings */ ++#define SSB_SPROM8_PA1LOB1 0x10D4 ++#define SSB_SPROM8_PA1LOB2 0x10D6 ++#define SSB_SPROM8_PA1HIB0 0x10D8 /* 5.8GHz power amp settings */ ++#define SSB_SPROM8_PA1HIB1 0x10DA ++#define SSB_SPROM8_PA1HIB2 0x10DC ++#define SSB_SPROM8_CCK2GPO 0x1140 /* CCK power offset */ ++#define SSB_SPROM8_OFDM2GPO 0x1142 /* 2.4GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GPO 0x1146 /* 5.3GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GLPO 0x114A /* 5.2GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GHPO 0x114E /* 5.8GHz OFDM power offset */ + + /* Values for SSB_SPROM1_BINF_CCODE */ + enum { diff --git a/target/linux/generic-2.6/patches-2.6.30/941-ssb_update.patch b/target/linux/generic-2.6/patches-2.6.30/941-ssb_update.patch new file mode 100644 index 0000000..7fdb3ca --- /dev/null +++ b/target/linux/generic-2.6/patches-2.6.30/941-ssb_update.patch @@ -0,0 +1,558 @@ +--- a/drivers/ssb/driver_chipcommon_pmu.c ++++ b/drivers/ssb/driver_chipcommon_pmu.c +@@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct + chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value); + } + ++static void ssb_chipco_regctl_maskset(struct ssb_chipcommon *cc, ++ u32 offset, u32 mask, u32 set) ++{ ++ u32 value; ++ ++ chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR); ++ chipco_write32(cc, SSB_CHIPCO_REGCTL_ADDR, offset); ++ chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR); ++ value = chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA); ++ value &= mask; ++ value |= set; ++ chipco_write32(cc, SSB_CHIPCO_REGCTL_DATA, value); ++ chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA); ++} ++ + struct pmu0_plltab_entry { + u16 freq; /* Crystal frequency in kHz.*/ + u8 xf; /* Crystal frequency value for PMU control */ +@@ -506,3 +521,82 @@ void ssb_pmu_init(struct ssb_chipcommon + ssb_pmu_pll_init(cc); + ssb_pmu_resources_init(cc); + } ++ ++void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc, ++ enum ssb_pmu_ldo_volt_id id, u32 voltage) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ u32 addr, shift, mask; ++ ++ switch (bus->chip_id) { ++ case 0x4328: ++ case 0x5354: ++ switch (id) { ++ case LDO_VOLT1: ++ addr = 2; ++ shift = 25; ++ mask = 0xF; ++ break; ++ case LDO_VOLT2: ++ addr = 3; ++ shift = 1; ++ mask = 0xF; ++ break; ++ case LDO_VOLT3: ++ addr = 3; ++ shift = 9; ++ mask = 0xF; ++ break; ++ case LDO_PAREF: ++ addr = 3; ++ shift = 17; ++ mask = 0x3F; ++ break; ++ default: ++ SSB_WARN_ON(1); ++ return; ++ } ++ break; ++ case 0x4312: ++ if (SSB_WARN_ON(id != LDO_PAREF)) ++ return; ++ addr = 0; ++ shift = 21; ++ mask = 0x3F; ++ break; ++ default: ++ return; ++ } ++ ++ ssb_chipco_regctl_maskset(cc, addr, ~(mask << shift), ++ (voltage & mask) << shift); ++} ++ ++void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ int ldo; ++ ++ switch (bus->chip_id) { ++ case 0x4312: ++ ldo = SSB_PMURES_4312_PA_REF_LDO; ++ break; ++ case 0x4328: ++ ldo = SSB_PMURES_4328_PA_REF_LDO; ++ break; ++ case 0x5354: ++ ldo = SSB_PMURES_5354_PA_REF_LDO; ++ break; ++ default: ++ return; ++ } ++ ++ if (on) ++ chipco_set32(cc, SSB_CHIPCO_PMU_MINRES_MSK, 1 << ldo); ++ else ++ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, ~(1 << ldo)); ++ chipco_read32(cc, SSB_CHIPCO_PMU_MINRES_MSK); //SPEC FIXME found via mmiotrace - dummy read? ++} ++ ++EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage); ++EXPORT_SYMBOL(ssb_pmu_set_ldo_paref); +--- a/drivers/ssb/main.c ++++ b/drivers/ssb/main.c +@@ -472,6 +472,8 @@ static int ssb_devices_register(struct s + case SSB_BUSTYPE_SSB: + dev->dma_mask = &dev->coherent_dma_mask; + break; ++ default: ++ break; + } + + sdev->dev = dev; +@@ -1358,8 +1360,10 @@ static int __init ssb_modinit(void) + ssb_buses_lock(); + err = ssb_attach_queued_buses(); + ssb_buses_unlock(); +- if (err) ++ if (err) { + bus_unregister(&ssb_bustype); ++ goto out; ++ } + + err = b43_pci_ssb_bridge_init(); + if (err) { +@@ -1375,7 +1379,7 @@ static int __init ssb_modinit(void) + /* don't fail SSB init because of this */ + err = 0; + } +- ++out: + return err; + } + /* ssb must be initialized after PCI but before the ssb drivers. +--- a/drivers/ssb/pci.c ++++ b/drivers/ssb/pci.c +@@ -169,8 +169,14 @@ err_pci: + /* Get the word-offset for a SSB_SPROM_XXX define. */ + #define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16)) + /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */ +-#define SPEX(_outvar, _offset, _mask, _shift) \ ++#define SPEX16(_outvar, _offset, _mask, _shift) \ + out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift)) ++#define SPEX32(_outvar, _offset, _mask, _shift) \ ++ out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \ ++ in[SPOFF(_offset)]) & (_mask)) >> (_shift)) ++#define SPEX(_outvar, _offset, _mask, _shift) \ ++ SPEX16(_outvar, _offset, _mask, _shift) ++ + + static inline u8 ssb_crc8(u8 crc, u8 data) + { +@@ -474,12 +480,14 @@ static void sprom_extract_r8(struct ssb_ + + /* extract the MAC address */ + for (i = 0; i < 3; i++) { +- v = in[SPOFF(SSB_SPROM1_IL0MAC) + i]; ++ v = in[SPOFF(SSB_SPROM8_IL0MAC) + i]; + *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); + } + SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0); + SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0); ++ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0); ++ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0); + SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A, + SSB_SPROM8_ANTAVAIL_A_SHIFT); + SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG, +@@ -490,12 +498,55 @@ static void sprom_extract_r8(struct ssb_ + SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0); + SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A, + SSB_SPROM8_ITSSI_A_SHIFT); ++ SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0); ++ SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK, ++ SSB_SPROM8_MAXP_AL_SHIFT); + SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0); + SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1, + SSB_SPROM8_GPIOA_P1_SHIFT); + SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0); + SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3, + SSB_SPROM8_GPIOB_P3_SHIFT); ++ SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0); ++ SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G, ++ SSB_SPROM8_TRI5G_SHIFT); ++ SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0); ++ SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH, ++ SSB_SPROM8_TRI5GH_SHIFT); ++ SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0); ++ SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G, ++ SSB_SPROM8_RXPO5G_SHIFT); ++ SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0); ++ SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G, ++ SSB_SPROM8_RSSISMC2G_SHIFT); ++ SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G, ++ SSB_SPROM8_RSSISAV2G_SHIFT); ++ SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G, ++ SSB_SPROM8_BXA2G_SHIFT); ++ SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0); ++ SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G, ++ SSB_SPROM8_RSSISMC5G_SHIFT); ++ SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G, ++ SSB_SPROM8_RSSISAV5G_SHIFT); ++ SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G, ++ SSB_SPROM8_BXA5G_SHIFT); ++ SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0); ++ SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0); ++ SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0); ++ SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0); ++ SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0); ++ SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0); ++ SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0); ++ SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0); ++ SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0); ++ SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0); ++ SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0); ++ SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0); ++ SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0); ++ SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0); ++ SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0); ++ SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0); ++ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); + + /* Extract the antenna gain values. */ + SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, +@@ -549,6 +600,7 @@ static int sprom_extract(struct ssb_bus + ssb_printk(KERN_WARNING PFX "Unsupported SPROM" + " revision %d detected. Will extract" + " v1\n", out->revision); ++ out->revision = 1; + sprom_extract_r123(out, in); + } + } +--- a/drivers/ssb/pcmcia.c ++++ b/drivers/ssb/pcmcia.c +@@ -583,7 +583,7 @@ static int ssb_pcmcia_sprom_write_all(st + ssb_printk("."); + err = ssb_pcmcia_sprom_write(bus, i, sprom[i]); + if (err) { +- ssb_printk("\n" KERN_NOTICE PFX ++ ssb_printk(KERN_NOTICE PFX + "Failed to write to SPROM.\n"); + failed = 1; + break; +@@ -591,7 +591,7 @@ static int ssb_pcmcia_sprom_write_all(st + } + err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS); + if (err) { +- ssb_printk("\n" KERN_NOTICE PFX ++ ssb_printk(KERN_NOTICE PFX + "Could not disable SPROM write access.\n"); + failed = 1; + } +@@ -678,7 +678,8 @@ int ssb_pcmcia_get_invariants(struct ssb + sprom->board_rev = tuple.TupleData[1]; + break; + case SSB_PCMCIA_CIS_PA: +- GOTO_ERROR_ON(tuple.TupleDataLen != 9, ++ GOTO_ERROR_ON((tuple.TupleDataLen != 9) && ++ (tuple.TupleDataLen != 10), + "pa tpl size"); + sprom->pa0b0 = tuple.TupleData[1] | + ((u16)tuple.TupleData[2] << 8); +@@ -718,7 +719,8 @@ int ssb_pcmcia_get_invariants(struct ssb + sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1]; + break; + case SSB_PCMCIA_CIS_BFLAGS: +- GOTO_ERROR_ON(tuple.TupleDataLen != 3, ++ GOTO_ERROR_ON((tuple.TupleDataLen != 3) && ++ (tuple.TupleDataLen != 5), + "bfl tpl size"); + sprom->boardflags_lo = tuple.TupleData[1] | + ((u16)tuple.TupleData[2] << 8); +--- a/include/linux/ssb/ssb.h ++++ b/include/linux/ssb/ssb.h +@@ -27,24 +27,54 @@ struct ssb_sprom { + u8 et1mdcport; /* MDIO for enet1 */ + u8 board_rev; /* Board revision number from SPROM. */ + u8 country_code; /* Country Code */ +- u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */ +- u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */ ++ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ ++ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ + u16 pa0b0; + u16 pa0b1; + u16 pa0b2; + u16 pa1b0; + u16 pa1b1; + u16 pa1b2; ++ u16 pa1lob0; ++ u16 pa1lob1; ++ u16 pa1lob2; ++ u16 pa1hib0; ++ u16 pa1hib1; ++ u16 pa1hib2; + u8 gpio0; /* GPIO pin 0 */ + u8 gpio1; /* GPIO pin 1 */ + u8 gpio2; /* GPIO pin 2 */ + u8 gpio3; /* GPIO pin 3 */ +- u16 maxpwr_a; /* A-PHY Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_bg; /* B/G-PHY Amplifier Max Power (in dBm Q5.2) */ ++ u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ ++ u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ ++ u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ ++ u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ + u8 itssi_a; /* Idle TSSI Target for A-PHY */ + u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ +- u16 boardflags_lo; /* Boardflags (low 16 bits) */ +- u16 boardflags_hi; /* Boardflags (high 16 bits) */ ++ u8 tri2g; /* 2.4GHz TX isolation */ ++ u8 tri5gl; /* 5.2GHz TX isolation */ ++ u8 tri5g; /* 5.3GHz TX isolation */ ++ u8 tri5gh; /* 5.8GHz TX isolation */ ++ u8 rxpo2g; /* 2GHz RX power offset */ ++ u8 rxpo5g; /* 5GHz RX power offset */ ++ u8 rssisav2g; /* 2GHz RSSI params */ ++ u8 rssismc2g; ++ u8 rssismf2g; ++ u8 bxa2g; /* 2GHz BX arch */ ++ u8 rssisav5g; /* 5GHz RSSI params */ ++ u8 rssismc5g; ++ u8 rssismf5g; ++ u8 bxa5g; /* 5GHz BX arch */ ++ u16 cck2gpo; /* CCK power offset */ ++ u32 ofdm2gpo; /* 2.4GHz OFDM power offset */ ++ u32 ofdm5glpo; /* 5.2GHz OFDM power offset */ ++ u32 ofdm5gpo; /* 5.3GHz OFDM power offset */ ++ u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */ ++ u16 boardflags_lo; /* Board flags (bits 0-15) */ ++ u16 boardflags_hi; /* Board flags (bits 16-31) */ ++ u16 boardflags2_lo; /* Board flags (bits 32-47) */ ++ u16 boardflags2_hi; /* Board flags (bits 48-63) */ ++ /* TODO store board flags in a single u64 */ + + /* Antenna gain values for up to 4 antennas + * on each band. Values in dBm/4 (Q5.2). Negative gain means the +@@ -58,7 +88,7 @@ struct ssb_sprom { + } ghz5; /* 5GHz band */ + } antenna_gain; + +- /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */ ++ /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ + }; + + /* Information about the PCB the circuitry is soldered on. */ +@@ -208,6 +238,7 @@ enum ssb_bustype { + SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */ + SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */ + SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */ ++ SSB_BUSTYPE_SDIO, /* SSB is connected to SDIO bus */ + }; + + /* board_vendor */ +@@ -240,8 +271,12 @@ struct ssb_bus { + + /* The core in the basic address register window. (PCI bus only) */ + struct ssb_device *mapped_device; +- /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ +- u8 mapped_pcmcia_seg; ++ union { ++ /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ ++ u8 mapped_pcmcia_seg; ++ /* Current SSB base address window for SDIO. */ ++ u32 sdio_sbaddr; ++ }; + /* Lock for core and segment switching. + * On PCMCIA-host busses this is used to protect the whole MMIO access. */ + spinlock_t bar_lock; +@@ -252,6 +287,11 @@ struct ssb_bus { + struct pci_dev *host_pci; + /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */ + struct pcmcia_device *host_pcmcia; ++ /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */ ++ struct sdio_func *host_sdio; ++ ++ /* See enum ssb_quirks */ ++ unsigned int quirks; + + #ifdef CONFIG_SSB_SPROM + /* Mutex to protect the SPROM writing. */ +@@ -306,6 +346,11 @@ struct ssb_bus { + #endif /* DEBUG */ + }; + ++enum ssb_quirks { ++ /* SDIO connected card requires performing a read after writing a 32-bit value */ ++ SSB_QUIRK_SDIO_READ_AFTER_WRITE32 = (1 << 0), ++}; ++ + /* The initialization-invariants. */ + struct ssb_init_invariants { + /* Versioning information about the PCB. */ +@@ -336,6 +381,12 @@ extern int ssb_bus_pcmciabus_register(st + struct pcmcia_device *pcmcia_dev, + unsigned long baseaddr); + #endif /* CONFIG_SSB_PCMCIAHOST */ ++#ifdef CONFIG_SSB_SDIOHOST ++extern int ssb_bus_sdiobus_register(struct ssb_bus *bus, ++ struct sdio_func *sdio_func, ++ unsigned int quirks); ++#endif /* CONFIG_SSB_SDIOHOST */ ++ + + extern void ssb_bus_unregister(struct ssb_bus *bus); + +--- a/include/linux/ssb/ssb_driver_chipcommon.h ++++ b/include/linux/ssb/ssb_driver_chipcommon.h +@@ -629,5 +629,15 @@ extern int ssb_chipco_serial_init(struct + /* PMU support */ + extern void ssb_pmu_init(struct ssb_chipcommon *cc); + ++enum ssb_pmu_ldo_volt_id { ++ LDO_PAREF = 0, ++ LDO_VOLT1, ++ LDO_VOLT2, ++ LDO_VOLT3, ++}; ++ ++void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc, ++ enum ssb_pmu_ldo_volt_id id, u32 voltage); ++void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on); + + #endif /* LINUX_SSB_CHIPCO_H_ */ +--- a/include/linux/ssb/ssb_regs.h ++++ b/include/linux/ssb/ssb_regs.h +@@ -162,7 +162,7 @@ + + /* SPROM shadow area. If not otherwise noted, fields are + * two bytes wide. Note that the SPROM can _only_ be read +- * in two-byte quantinies. ++ * in two-byte quantities. + */ + #define SSB_SPROMSIZE_WORDS 64 + #define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16)) +@@ -327,8 +327,11 @@ + #define SSB_SPROM5_GPIOB_P3_SHIFT 8 + + /* SPROM Revision 8 */ +-#define SSB_SPROM8_BFLLO 0x1084 /* Boardflags (low 16 bits) */ +-#define SSB_SPROM8_BFLHI 0x1086 /* Boardflags Hi */ ++#define SSB_SPROM8_BOARDREV 0x1082 /* Board revision */ ++#define SSB_SPROM8_BFLLO 0x1084 /* Board flags (bits 0-15) */ ++#define SSB_SPROM8_BFLHI 0x1086 /* Board flags (bits 16-31) */ ++#define SSB_SPROM8_BFL2LO 0x1088 /* Board flags (bits 32-47) */ ++#define SSB_SPROM8_BFL2HI 0x108A /* Board flags (bits 48-63) */ + #define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */ + #define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */ + #define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/ +@@ -354,14 +357,63 @@ + #define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ + #define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ + #define SSB_SPROM8_GPIOB_P3_SHIFT 8 +-#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power BG in path 1 */ +-#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */ ++#define SSB_SPROM8_RSSIPARM2G 0x10A4 /* RSSI params for 2GHz */ ++#define SSB_SPROM8_RSSISMF2G 0x000F ++#define SSB_SPROM8_RSSISMC2G 0x00F0 ++#define SSB_SPROM8_RSSISMC2G_SHIFT 4 ++#define SSB_SPROM8_RSSISAV2G 0x0700 ++#define SSB_SPROM8_RSSISAV2G_SHIFT 8 ++#define SSB_SPROM8_BXA2G 0x1800 ++#define SSB_SPROM8_BXA2G_SHIFT 11 ++#define SSB_SPROM8_RSSIPARM5G 0x10A6 /* RSSI params for 5GHz */ ++#define SSB_SPROM8_RSSISMF5G 0x000F ++#define SSB_SPROM8_RSSISMC5G 0x00F0 ++#define SSB_SPROM8_RSSISMC5G_SHIFT 4 ++#define SSB_SPROM8_RSSISAV5G 0x0700 ++#define SSB_SPROM8_RSSISAV5G_SHIFT 8 ++#define SSB_SPROM8_BXA5G 0x1800 ++#define SSB_SPROM8_BXA5G_SHIFT 11 ++#define SSB_SPROM8_TRI25G 0x10A8 /* TX isolation 2.4&5.3GHz */ ++#define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */ ++#define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */ ++#define SSB_SPROM8_TRI5G_SHIFT 8 ++#define SSB_SPROM8_TRI5GHL 0x10AA /* TX isolation 5.2/5.8GHz */ ++#define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */ ++#define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */ ++#define SSB_SPROM8_TRI5GH_SHIFT 8 ++#define SSB_SPROM8_RXPO 0x10AC /* RX power offsets */ ++#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ ++#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ ++#define SSB_SPROM8_RXPO5G_SHIFT 8 ++#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power 2GHz in path 1 */ ++#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ + #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ + #define SSB_SPROM8_ITSSI_BG_SHIFT 8 +-#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power A in path 1 */ +-#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power A */ ++#define SSB_SPROM8_PA0B0 0x10C2 /* 2GHz power amp settings */ ++#define SSB_SPROM8_PA0B1 0x10C4 ++#define SSB_SPROM8_PA0B2 0x10C6 ++#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power 5.3GHz */ ++#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */ + #define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ + #define SSB_SPROM8_ITSSI_A_SHIFT 8 ++#define SSB_SPROM8_MAXP_AHL 0x10CA /* Max Power 5.2/5.8GHz */ ++#define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */ ++#define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */ ++#define SSB_SPROM8_MAXP_AL_SHIFT 8 ++#define SSB_SPROM8_PA1B0 0x10CC /* 5.3GHz power amp settings */ ++#define SSB_SPROM8_PA1B1 0x10CE ++#define SSB_SPROM8_PA1B2 0x10D0 ++#define SSB_SPROM8_PA1LOB0 0x10D2 /* 5.2GHz power amp settings */ ++#define SSB_SPROM8_PA1LOB1 0x10D4 ++#define SSB_SPROM8_PA1LOB2 0x10D6 ++#define SSB_SPROM8_PA1HIB0 0x10D8 /* 5.8GHz power amp settings */ ++#define SSB_SPROM8_PA1HIB1 0x10DA ++#define SSB_SPROM8_PA1HIB2 0x10DC ++#define SSB_SPROM8_CCK2GPO 0x1140 /* CCK power offset */ ++#define SSB_SPROM8_OFDM2GPO 0x1142 /* 2.4GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GPO 0x1146 /* 5.3GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GLPO 0x114A /* 5.2GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GHPO 0x114E /* 5.8GHz OFDM power offset */ + + /* Values for SSB_SPROM1_BINF_CCODE */ + enum { +--- a/drivers/ssb/scan.c ++++ b/drivers/ssb/scan.c +@@ -175,6 +175,8 @@ static u32 scan_read32(struct ssb_bus *b + } else + ssb_pcmcia_switch_segment(bus, 0); + break; ++ default: ++ break; + } + return readl(bus->mmio + offset); + } +@@ -188,6 +190,8 @@ static int scan_switchcore(struct ssb_bu + return ssb_pci_switch_coreidx(bus, coreidx); + case SSB_BUSTYPE_PCMCIA: + return ssb_pcmcia_switch_coreidx(bus, coreidx); ++ default: ++ break; + } + return 0; + } +@@ -206,6 +210,8 @@ void ssb_iounmap(struct ssb_bus *bus) + SSB_BUG_ON(1); /* Can't reach this code. */ + #endif + break; ++ default: ++ break; + } + bus->mmio = NULL; + bus->mapped_device = NULL; +@@ -230,6 +236,8 @@ static void __iomem *ssb_ioremap(struct + SSB_BUG_ON(1); /* Can't reach this code. */ + #endif + break; ++ default: ++ break; + } + + return mmio; diff --git a/target/linux/generic-2.6/patches-2.6.31/941-ssb_update.patch b/target/linux/generic-2.6/patches-2.6.31/941-ssb_update.patch new file mode 100644 index 0000000..8adb56d --- /dev/null +++ b/target/linux/generic-2.6/patches-2.6.31/941-ssb_update.patch @@ -0,0 +1,506 @@ +--- a/drivers/ssb/driver_chipcommon_pmu.c ++++ b/drivers/ssb/driver_chipcommon_pmu.c +@@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct + chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value); + } + ++static void ssb_chipco_regctl_maskset(struct ssb_chipcommon *cc, ++ u32 offset, u32 mask, u32 set) ++{ ++ u32 value; ++ ++ chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR); ++ chipco_write32(cc, SSB_CHIPCO_REGCTL_ADDR, offset); ++ chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR); ++ value = chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA); ++ value &= mask; ++ value |= set; ++ chipco_write32(cc, SSB_CHIPCO_REGCTL_DATA, value); ++ chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA); ++} ++ + struct pmu0_plltab_entry { + u16 freq; /* Crystal frequency in kHz.*/ + u8 xf; /* Crystal frequency value for PMU control */ +@@ -506,3 +521,82 @@ void ssb_pmu_init(struct ssb_chipcommon + ssb_pmu_pll_init(cc); + ssb_pmu_resources_init(cc); + } ++ ++void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc, ++ enum ssb_pmu_ldo_volt_id id, u32 voltage) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ u32 addr, shift, mask; ++ ++ switch (bus->chip_id) { ++ case 0x4328: ++ case 0x5354: ++ switch (id) { ++ case LDO_VOLT1: ++ addr = 2; ++ shift = 25; ++ mask = 0xF; ++ break; ++ case LDO_VOLT2: ++ addr = 3; ++ shift = 1; ++ mask = 0xF; ++ break; ++ case LDO_VOLT3: ++ addr = 3; ++ shift = 9; ++ mask = 0xF; ++ break; ++ case LDO_PAREF: ++ addr = 3; ++ shift = 17; ++ mask = 0x3F; ++ break; ++ default: ++ SSB_WARN_ON(1); ++ return; ++ } ++ break; ++ case 0x4312: ++ if (SSB_WARN_ON(id != LDO_PAREF)) ++ return; ++ addr = 0; ++ shift = 21; ++ mask = 0x3F; ++ break; ++ default: ++ return; ++ } ++ ++ ssb_chipco_regctl_maskset(cc, addr, ~(mask << shift), ++ (voltage & mask) << shift); ++} ++ ++void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ int ldo; ++ ++ switch (bus->chip_id) { ++ case 0x4312: ++ ldo = SSB_PMURES_4312_PA_REF_LDO; ++ break; ++ case 0x4328: ++ ldo = SSB_PMURES_4328_PA_REF_LDO; ++ break; ++ case 0x5354: ++ ldo = SSB_PMURES_5354_PA_REF_LDO; ++ break; ++ default: ++ return; ++ } ++ ++ if (on) ++ chipco_set32(cc, SSB_CHIPCO_PMU_MINRES_MSK, 1 << ldo); ++ else ++ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, ~(1 << ldo)); ++ chipco_read32(cc, SSB_CHIPCO_PMU_MINRES_MSK); //SPEC FIXME found via mmiotrace - dummy read? ++} ++ ++EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage); ++EXPORT_SYMBOL(ssb_pmu_set_ldo_paref); +--- a/drivers/ssb/main.c ++++ b/drivers/ssb/main.c +@@ -469,6 +469,8 @@ static int ssb_devices_register(struct s + dev->parent = &bus->host_pcmcia->dev; + #endif + break; ++ case SSB_BUSTYPE_SDIO: ++ break; + case SSB_BUSTYPE_SSB: + dev->dma_mask = &dev->coherent_dma_mask; + break; +@@ -1358,8 +1360,10 @@ static int __init ssb_modinit(void) + ssb_buses_lock(); + err = ssb_attach_queued_buses(); + ssb_buses_unlock(); +- if (err) ++ if (err) { + bus_unregister(&ssb_bustype); ++ goto out; ++ } + + err = b43_pci_ssb_bridge_init(); + if (err) { +@@ -1375,7 +1379,7 @@ static int __init ssb_modinit(void) + /* don't fail SSB init because of this */ + err = 0; + } +- ++out: + return err; + } + /* ssb must be initialized after PCI but before the ssb drivers. +--- a/drivers/ssb/pci.c ++++ b/drivers/ssb/pci.c +@@ -169,8 +169,14 @@ err_pci: + /* Get the word-offset for a SSB_SPROM_XXX define. */ + #define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16)) + /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */ +-#define SPEX(_outvar, _offset, _mask, _shift) \ ++#define SPEX16(_outvar, _offset, _mask, _shift) \ + out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift)) ++#define SPEX32(_outvar, _offset, _mask, _shift) \ ++ out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \ ++ in[SPOFF(_offset)]) & (_mask)) >> (_shift)) ++#define SPEX(_outvar, _offset, _mask, _shift) \ ++ SPEX16(_outvar, _offset, _mask, _shift) ++ + + static inline u8 ssb_crc8(u8 crc, u8 data) + { +@@ -474,12 +480,14 @@ static void sprom_extract_r8(struct ssb_ + + /* extract the MAC address */ + for (i = 0; i < 3; i++) { +- v = in[SPOFF(SSB_SPROM1_IL0MAC) + i]; ++ v = in[SPOFF(SSB_SPROM8_IL0MAC) + i]; + *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); + } + SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0); + SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0); ++ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0); ++ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0); + SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A, + SSB_SPROM8_ANTAVAIL_A_SHIFT); + SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG, +@@ -490,12 +498,55 @@ static void sprom_extract_r8(struct ssb_ + SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0); + SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A, + SSB_SPROM8_ITSSI_A_SHIFT); ++ SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0); ++ SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK, ++ SSB_SPROM8_MAXP_AL_SHIFT); + SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0); + SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1, + SSB_SPROM8_GPIOA_P1_SHIFT); + SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0); + SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3, + SSB_SPROM8_GPIOB_P3_SHIFT); ++ SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0); ++ SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G, ++ SSB_SPROM8_TRI5G_SHIFT); ++ SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0); ++ SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH, ++ SSB_SPROM8_TRI5GH_SHIFT); ++ SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0); ++ SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G, ++ SSB_SPROM8_RXPO5G_SHIFT); ++ SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0); ++ SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G, ++ SSB_SPROM8_RSSISMC2G_SHIFT); ++ SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G, ++ SSB_SPROM8_RSSISAV2G_SHIFT); ++ SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G, ++ SSB_SPROM8_BXA2G_SHIFT); ++ SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0); ++ SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G, ++ SSB_SPROM8_RSSISMC5G_SHIFT); ++ SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G, ++ SSB_SPROM8_RSSISAV5G_SHIFT); ++ SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G, ++ SSB_SPROM8_BXA5G_SHIFT); ++ SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0); ++ SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0); ++ SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0); ++ SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0); ++ SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0); ++ SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0); ++ SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0); ++ SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0); ++ SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0); ++ SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0); ++ SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0); ++ SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0); ++ SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0); ++ SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0); ++ SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0); ++ SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0); ++ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); + + /* Extract the antenna gain values. */ + SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, +@@ -549,6 +600,7 @@ static int sprom_extract(struct ssb_bus + ssb_printk(KERN_WARNING PFX "Unsupported SPROM" + " revision %d detected. Will extract" + " v1\n", out->revision); ++ out->revision = 1; + sprom_extract_r123(out, in); + } + } +--- a/drivers/ssb/scan.c ++++ b/drivers/ssb/scan.c +@@ -175,6 +175,9 @@ static u32 scan_read32(struct ssb_bus *b + } else + ssb_pcmcia_switch_segment(bus, 0); + break; ++ case SSB_BUSTYPE_SDIO: ++ offset += current_coreidx * SSB_CORE_SIZE; ++ return ssb_sdio_scan_read32(bus, offset); + } + return readl(bus->mmio + offset); + } +@@ -188,6 +191,8 @@ static int scan_switchcore(struct ssb_bu + return ssb_pci_switch_coreidx(bus, coreidx); + case SSB_BUSTYPE_PCMCIA: + return ssb_pcmcia_switch_coreidx(bus, coreidx); ++ case SSB_BUSTYPE_SDIO: ++ break; + } + return 0; + } +@@ -206,6 +211,8 @@ void ssb_iounmap(struct ssb_bus *bus) + SSB_BUG_ON(1); /* Can't reach this code. */ + #endif + break; ++ case SSB_BUSTYPE_SDIO: ++ break; + } + bus->mmio = NULL; + bus->mapped_device = NULL; +@@ -230,6 +237,8 @@ static void __iomem *ssb_ioremap(struct + SSB_BUG_ON(1); /* Can't reach this code. */ + #endif + break; ++ case SSB_BUSTYPE_SDIO: ++ break; + } + + return mmio; +--- a/include/linux/ssb/ssb.h ++++ b/include/linux/ssb/ssb.h +@@ -27,24 +27,54 @@ struct ssb_sprom { + u8 et1mdcport; /* MDIO for enet1 */ + u8 board_rev; /* Board revision number from SPROM. */ + u8 country_code; /* Country Code */ +- u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */ +- u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */ ++ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ ++ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ + u16 pa0b0; + u16 pa0b1; + u16 pa0b2; + u16 pa1b0; + u16 pa1b1; + u16 pa1b2; ++ u16 pa1lob0; ++ u16 pa1lob1; ++ u16 pa1lob2; ++ u16 pa1hib0; ++ u16 pa1hib1; ++ u16 pa1hib2; + u8 gpio0; /* GPIO pin 0 */ + u8 gpio1; /* GPIO pin 1 */ + u8 gpio2; /* GPIO pin 2 */ + u8 gpio3; /* GPIO pin 3 */ +- u16 maxpwr_a; /* A-PHY Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_bg; /* B/G-PHY Amplifier Max Power (in dBm Q5.2) */ ++ u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ ++ u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ ++ u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ ++ u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ + u8 itssi_a; /* Idle TSSI Target for A-PHY */ + u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ +- u16 boardflags_lo; /* Boardflags (low 16 bits) */ +- u16 boardflags_hi; /* Boardflags (high 16 bits) */ ++ u8 tri2g; /* 2.4GHz TX isolation */ ++ u8 tri5gl; /* 5.2GHz TX isolation */ ++ u8 tri5g; /* 5.3GHz TX isolation */ ++ u8 tri5gh; /* 5.8GHz TX isolation */ ++ u8 rxpo2g; /* 2GHz RX power offset */ ++ u8 rxpo5g; /* 5GHz RX power offset */ ++ u8 rssisav2g; /* 2GHz RSSI params */ ++ u8 rssismc2g; ++ u8 rssismf2g; ++ u8 bxa2g; /* 2GHz BX arch */ ++ u8 rssisav5g; /* 5GHz RSSI params */ ++ u8 rssismc5g; ++ u8 rssismf5g; ++ u8 bxa5g; /* 5GHz BX arch */ ++ u16 cck2gpo; /* CCK power offset */ ++ u32 ofdm2gpo; /* 2.4GHz OFDM power offset */ ++ u32 ofdm5glpo; /* 5.2GHz OFDM power offset */ ++ u32 ofdm5gpo; /* 5.3GHz OFDM power offset */ ++ u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */ ++ u16 boardflags_lo; /* Board flags (bits 0-15) */ ++ u16 boardflags_hi; /* Board flags (bits 16-31) */ ++ u16 boardflags2_lo; /* Board flags (bits 32-47) */ ++ u16 boardflags2_hi; /* Board flags (bits 48-63) */ ++ /* TODO store board flags in a single u64 */ + + /* Antenna gain values for up to 4 antennas + * on each band. Values in dBm/4 (Q5.2). Negative gain means the +@@ -58,7 +88,7 @@ struct ssb_sprom { + } ghz5; /* 5GHz band */ + } antenna_gain; + +- /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */ ++ /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ + }; + + /* Information about the PCB the circuitry is soldered on. */ +@@ -208,6 +238,7 @@ enum ssb_bustype { + SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */ + SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */ + SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */ ++ SSB_BUSTYPE_SDIO, /* SSB is connected to SDIO bus */ + }; + + /* board_vendor */ +@@ -240,8 +271,12 @@ struct ssb_bus { + + /* The core in the basic address register window. (PCI bus only) */ + struct ssb_device *mapped_device; +- /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ +- u8 mapped_pcmcia_seg; ++ union { ++ /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ ++ u8 mapped_pcmcia_seg; ++ /* Current SSB base address window for SDIO. */ ++ u32 sdio_sbaddr; ++ }; + /* Lock for core and segment switching. + * On PCMCIA-host busses this is used to protect the whole MMIO access. */ + spinlock_t bar_lock; +@@ -252,6 +287,11 @@ struct ssb_bus { + struct pci_dev *host_pci; + /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */ + struct pcmcia_device *host_pcmcia; ++ /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */ ++ struct sdio_func *host_sdio; ++ ++ /* See enum ssb_quirks */ ++ unsigned int quirks; + + #ifdef CONFIG_SSB_SPROM + /* Mutex to protect the SPROM writing. */ +@@ -306,6 +346,11 @@ struct ssb_bus { + #endif /* DEBUG */ + }; + ++enum ssb_quirks { ++ /* SDIO connected card requires performing a read after writing a 32-bit value */ ++ SSB_QUIRK_SDIO_READ_AFTER_WRITE32 = (1 << 0), ++}; ++ + /* The initialization-invariants. */ + struct ssb_init_invariants { + /* Versioning information about the PCB. */ +--- a/include/linux/ssb/ssb_driver_chipcommon.h ++++ b/include/linux/ssb/ssb_driver_chipcommon.h +@@ -629,5 +629,15 @@ extern int ssb_chipco_serial_init(struct + /* PMU support */ + extern void ssb_pmu_init(struct ssb_chipcommon *cc); + ++enum ssb_pmu_ldo_volt_id { ++ LDO_PAREF = 0, ++ LDO_VOLT1, ++ LDO_VOLT2, ++ LDO_VOLT3, ++}; ++ ++void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc, ++ enum ssb_pmu_ldo_volt_id id, u32 voltage); ++void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on); + + #endif /* LINUX_SSB_CHIPCO_H_ */ +--- a/include/linux/ssb/ssb_regs.h ++++ b/include/linux/ssb/ssb_regs.h +@@ -162,7 +162,7 @@ + + /* SPROM shadow area. If not otherwise noted, fields are + * two bytes wide. Note that the SPROM can _only_ be read +- * in two-byte quantinies. ++ * in two-byte quantities. + */ + #define SSB_SPROMSIZE_WORDS 64 + #define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16)) +@@ -327,8 +327,11 @@ + #define SSB_SPROM5_GPIOB_P3_SHIFT 8 + + /* SPROM Revision 8 */ +-#define SSB_SPROM8_BFLLO 0x1084 /* Boardflags (low 16 bits) */ +-#define SSB_SPROM8_BFLHI 0x1086 /* Boardflags Hi */ ++#define SSB_SPROM8_BOARDREV 0x1082 /* Board revision */ ++#define SSB_SPROM8_BFLLO 0x1084 /* Board flags (bits 0-15) */ ++#define SSB_SPROM8_BFLHI 0x1086 /* Board flags (bits 16-31) */ ++#define SSB_SPROM8_BFL2LO 0x1088 /* Board flags (bits 32-47) */ ++#define SSB_SPROM8_BFL2HI 0x108A /* Board flags (bits 48-63) */ + #define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */ + #define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */ + #define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/ +@@ -354,14 +357,63 @@ + #define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ + #define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ + #define SSB_SPROM8_GPIOB_P3_SHIFT 8 +-#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power BG in path 1 */ +-#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */ ++#define SSB_SPROM8_RSSIPARM2G 0x10A4 /* RSSI params for 2GHz */ ++#define SSB_SPROM8_RSSISMF2G 0x000F ++#define SSB_SPROM8_RSSISMC2G 0x00F0 ++#define SSB_SPROM8_RSSISMC2G_SHIFT 4 ++#define SSB_SPROM8_RSSISAV2G 0x0700 ++#define SSB_SPROM8_RSSISAV2G_SHIFT 8 ++#define SSB_SPROM8_BXA2G 0x1800 ++#define SSB_SPROM8_BXA2G_SHIFT 11 ++#define SSB_SPROM8_RSSIPARM5G 0x10A6 /* RSSI params for 5GHz */ ++#define SSB_SPROM8_RSSISMF5G 0x000F ++#define SSB_SPROM8_RSSISMC5G 0x00F0 ++#define SSB_SPROM8_RSSISMC5G_SHIFT 4 ++#define SSB_SPROM8_RSSISAV5G 0x0700 ++#define SSB_SPROM8_RSSISAV5G_SHIFT 8 ++#define SSB_SPROM8_BXA5G 0x1800 ++#define SSB_SPROM8_BXA5G_SHIFT 11 ++#define SSB_SPROM8_TRI25G 0x10A8 /* TX isolation 2.4&5.3GHz */ ++#define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */ ++#define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */ ++#define SSB_SPROM8_TRI5G_SHIFT 8 ++#define SSB_SPROM8_TRI5GHL 0x10AA /* TX isolation 5.2/5.8GHz */ ++#define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */ ++#define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */ ++#define SSB_SPROM8_TRI5GH_SHIFT 8 ++#define SSB_SPROM8_RXPO 0x10AC /* RX power offsets */ ++#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ ++#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ ++#define SSB_SPROM8_RXPO5G_SHIFT 8 ++#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power 2GHz in path 1 */ ++#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ + #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ + #define SSB_SPROM8_ITSSI_BG_SHIFT 8 +-#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power A in path 1 */ +-#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power A */ ++#define SSB_SPROM8_PA0B0 0x10C2 /* 2GHz power amp settings */ ++#define SSB_SPROM8_PA0B1 0x10C4 ++#define SSB_SPROM8_PA0B2 0x10C6 ++#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power 5.3GHz */ ++#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */ + #define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ + #define SSB_SPROM8_ITSSI_A_SHIFT 8 ++#define SSB_SPROM8_MAXP_AHL 0x10CA /* Max Power 5.2/5.8GHz */ ++#define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */ ++#define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */ ++#define SSB_SPROM8_MAXP_AL_SHIFT 8 ++#define SSB_SPROM8_PA1B0 0x10CC /* 5.3GHz power amp settings */ ++#define SSB_SPROM8_PA1B1 0x10CE ++#define SSB_SPROM8_PA1B2 0x10D0 ++#define SSB_SPROM8_PA1LOB0 0x10D2 /* 5.2GHz power amp settings */ ++#define SSB_SPROM8_PA1LOB1 0x10D4 ++#define SSB_SPROM8_PA1LOB2 0x10D6 ++#define SSB_SPROM8_PA1HIB0 0x10D8 /* 5.8GHz power amp settings */ ++#define SSB_SPROM8_PA1HIB1 0x10DA ++#define SSB_SPROM8_PA1HIB2 0x10DC ++#define SSB_SPROM8_CCK2GPO 0x1140 /* CCK power offset */ ++#define SSB_SPROM8_OFDM2GPO 0x1142 /* 2.4GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GPO 0x1146 /* 5.3GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GLPO 0x114A /* 5.2GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GHPO 0x114E /* 5.8GHz OFDM power offset */ + + /* Values for SSB_SPROM1_BINF_CCODE */ + enum { |