diff options
Diffstat (limited to 'target')
36 files changed, 0 insertions, 5855 deletions
diff --git a/target/linux/brcm63xx/config-2.6.35 b/target/linux/brcm63xx/config-2.6.35 deleted file mode 100644 index 4514ac9..0000000 --- a/target/linux/brcm63xx/config-2.6.35 +++ /dev/null @@ -1,222 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -# CONFIG_ALCHEMY_GPIO_INDIRECT is not set -# CONFIG_AR7 is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_ATH_COMMON is not set -CONFIG_AUDIT=y -CONFIG_AUDIT_GENERIC=y -# CONFIG_BATMAN_ADV is not set -# CONFIG_BCM47XX is not set -CONFIG_BCM63XX=y -CONFIG_BCM63XX_CPU_6338=y -CONFIG_BCM63XX_CPU_6345=y -CONFIG_BCM63XX_CPU_6348=y -CONFIG_BCM63XX_CPU_6358=y -CONFIG_BCM63XX_ENET=y -CONFIG_BCM63XX_PHY=y -CONFIG_BCM63XX_WDT=y -CONFIG_BITREVERSE=y -CONFIG_BOARD_BCM963XX=y -# CONFIG_BOARD_LIVEBOX is not set -CONFIG_BSD_PROCESS_ACCT_V3=y -# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set -# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CEVT_R4K=y -CONFIG_CEVT_R4K_LIB=y -CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200" -CONFIG_CMDLINE_BOOL=y -# CONFIG_CMDLINE_OVERRIDE is not set -CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_CPU_CAVIUM_OCTEON is not set -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -# CONFIG_CPU_LOONGSON2E is not set -# CONFIG_CPU_LOONGSON2F is not set -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR1=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R5500 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -CONFIG_CRAMFS=y -CONFIG_CSRC_R4K=y -CONFIG_CSRC_R4K_LIB=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DEFAULT_SECURITY="" -CONFIG_DEVPORT=y -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_ELF_CORE=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_GPIOLIB=y -# CONFIG_GPIO_CS5535 is not set -CONFIG_GPIO_74X164=y -CONFIG_GPIO_DEVICE=y -CONFIG_GPIO_SYSFS=y -# CONFIG_HAMRADIO is not set -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -CONFIG_HZ=250 -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -CONFIG_IMAGE_CMDLINE_HACK=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_IRQ_CPU=y -CONFIG_KEXEC=y -CONFIG_LEDS_GPIO=y -# CONFIG_LEDS_LT3593 is not set -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set -CONFIG_LOONGSON_UART_BASE=y -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_LOONGSON is not set -# CONFIG_MACH_TX39XX is not set -# CONFIG_MACH_TX49XX is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_MIKROTIK_RB532 is not set -CONFIG_MIPS=y -# CONFIG_MIPS_COBALT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MACHINE is not set -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SIM is not set -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MTD_BCM963XX=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_BE_BYTE_SWAP=y -# CONFIG_MTD_CFI_GEOMETRY is not set -# CONFIG_MTD_CFI_NOSWAP is not set -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -# CONFIG_NL80211_TESTMODE is not set -# CONFIG_NO_IOPORT is not set -# CONFIG_NXP_STB220 is not set -# CONFIG_NXP_STB225 is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PHYLIB=y -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -CONFIG_POSIX_MQUEUE=y -CONFIG_POSIX_MQUEUE_SYSCTL=y -# CONFIG_POWERTV is not set -# CONFIG_R8187SE is not set -# CONFIG_RAMZSWAP is not set -CONFIG_RELAY=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -# CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_8250 is not set -CONFIG_SERIAL_BCM63XX=y -CONFIG_SERIAL_BCM63XX_CONSOLE=y -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -CONFIG_SPI=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_GPIO=y -CONFIG_SPI_MASTER=y -CONFIG_SQUASHFS_EMBEDDED=y -CONFIG_SSB=y -CONFIG_SSB_B43_PCI_BRIDGE=y -# CONFIG_SSB_DRIVER_MIPS is not set -CONFIG_SSB_DRIVER_PCICORE=y -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_SPROM=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -# CONFIG_TC35815 is not set -# CONFIG_TINY_RCU is not set -CONFIG_TRAD_SIGNALS=y -# CONFIG_TREE_PREEMPT_RCU is not set -CONFIG_TREE_RCU=y -CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y -CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_SUPPORT=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_WEXT_CORE=y -CONFIG_WEXT_PROC=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/brcm63xx/patches-2.6.35/007-usb-ohci-support.patch b/target/linux/brcm63xx/patches-2.6.35/007-usb-ohci-support.patch deleted file mode 100644 index a70b501..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/007-usb-ohci-support.patch +++ /dev/null @@ -1,125 +0,0 @@ -The bcm63xx SOC has an integrated OHCI controller, this patch adds -platform device registration and change board code to register ohci -device when necessary. - -Signed-off-by: Maxime Bizon <mbizon@freebox.fr> ---- - arch/mips/bcm63xx/Kconfig | 6 ++ - arch/mips/bcm63xx/Makefile | 3 +- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 4 ++ - arch/mips/bcm63xx/dev-usb-ohci.c | 49 ++++++++++++++++++++ - .../asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h | 6 ++ - 5 files changed, 67 insertions(+), 1 deletions(-) - create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c - create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h - ---- a/arch/mips/bcm63xx/Kconfig -+++ b/arch/mips/bcm63xx/Kconfig -@@ -16,10 +16,16 @@ config BCM63XX_CPU_6345 - config BCM63XX_CPU_6348 - bool "support 6348 CPU" - select HW_HAS_PCI -+ select USB_ARCH_HAS_OHCI -+ select USB_OHCI_BIG_ENDIAN_DESC -+ select USB_OHCI_BIG_ENDIAN_MMIO - - config BCM63XX_CPU_6358 - bool "support 6358 CPU" - select HW_HAS_PCI -+ select USB_ARCH_HAS_OHCI -+ select USB_OHCI_BIG_ENDIAN_DESC -+ select USB_OHCI_BIG_ENDIAN_MMIO - endmenu - - source "arch/mips/bcm63xx/boards/Kconfig" ---- a/arch/mips/bcm63xx/Makefile -+++ b/arch/mips/bcm63xx/Makefile -@@ -1,5 +1,6 @@ - obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \ -- dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o -+ dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \ -+ dev-usb-ohci.o - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - - obj-y += boards/ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -25,6 +25,7 @@ - #include <bcm63xx_dev_enet.h> - #include <bcm63xx_dev_dsp.h> - #include <bcm63xx_dev_pcmcia.h> -+#include <bcm63xx_dev_usb_ohci.h> - #include <board_bcm963xx.h> - - #define PFX "board_bcm963xx: " -@@ -877,6 +878,9 @@ int __init board_register_devices(void) - !board_get_mac_address(board.enet1.mac_addr)) - bcm63xx_enet_register(1, &board.enet1); - -+ if (board.has_ohci0) -+ bcm63xx_ohci_register(); -+ - if (board.has_dsp) - bcm63xx_dsp_register(&board.dsp); - ---- /dev/null -+++ b/arch/mips/bcm63xx/dev-usb-ohci.c -@@ -0,0 +1,49 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr> -+ */ -+ -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/platform_device.h> -+#include <bcm63xx_cpu.h> -+#include <bcm63xx_dev_usb_ohci.h> -+ -+static struct resource ohci_resources[] = { -+ { -+ /* start & end filled at runtime */ -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ /* start filled at runtime */ -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static u64 ohci_dmamask = ~(u32)0; -+ -+static struct platform_device bcm63xx_ohci_device = { -+ .name = "bcm63xx_ohci", -+ .id = 0, -+ .num_resources = ARRAY_SIZE(ohci_resources), -+ .resource = ohci_resources, -+ .dev = { -+ .dma_mask = &ohci_dmamask, -+ .coherent_dma_mask = 0xffffffff, -+ }, -+}; -+ -+int __init bcm63xx_ohci_register(void) -+{ -+ if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358()) -+ return 0; -+ -+ ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0); -+ ohci_resources[0].end = ohci_resources[0].start; -+ ohci_resources[0].end += RSET_OHCI_SIZE - 1; -+ ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0); -+ return platform_device_register(&bcm63xx_ohci_device); -+} ---- /dev/null -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h -@@ -0,0 +1,6 @@ -+#ifndef BCM63XX_DEV_USB_OHCI_H_ -+#define BCM63XX_DEV_USB_OHCI_H_ -+ -+int bcm63xx_ohci_register(void); -+ -+#endif /* BCM63XX_DEV_USB_OHCI_H_ */ diff --git a/target/linux/brcm63xx/patches-2.6.35/008-usb-ehci-support.patch b/target/linux/brcm63xx/patches-2.6.35/008-usb-ehci-support.patch deleted file mode 100644 index 0c236f0..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/008-usb-ehci-support.patch +++ /dev/null @@ -1,117 +0,0 @@ -The bcm63xx SOC has an integrated EHCI controller, this patch adds -platform device registration and change board code to register -EHCI device when necessary. - -Signed-off-by: Maxime Bizon <mbizon@freebox.fr> ---- - arch/mips/bcm63xx/Kconfig | 2 + - arch/mips/bcm63xx/Makefile | 2 +- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 4 ++ - arch/mips/bcm63xx/dev-usb-ehci.c | 49 ++++++++++++++++++++ - .../asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h | 6 ++ - 5 files changed, 62 insertions(+), 1 deletions(-) - create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c - create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h - ---- a/arch/mips/bcm63xx/Kconfig -+++ b/arch/mips/bcm63xx/Kconfig -@@ -26,6 +26,8 @@ config BCM63XX_CPU_6358 - select USB_ARCH_HAS_OHCI - select USB_OHCI_BIG_ENDIAN_DESC - select USB_OHCI_BIG_ENDIAN_MMIO -+ select USB_ARCH_HAS_EHCI -+ select USB_EHCI_BIG_ENDIAN_MMIO - endmenu - - source "arch/mips/bcm63xx/boards/Kconfig" ---- a/arch/mips/bcm63xx/Makefile -+++ b/arch/mips/bcm63xx/Makefile -@@ -1,6 +1,6 @@ - obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \ - dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \ -- dev-usb-ohci.o -+ dev-usb-ohci.o dev-usb-ehci.o - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - - obj-y += boards/ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -26,6 +26,7 @@ - #include <bcm63xx_dev_dsp.h> - #include <bcm63xx_dev_pcmcia.h> - #include <bcm63xx_dev_usb_ohci.h> -+#include <bcm63xx_dev_usb_ehci.h> - #include <board_bcm963xx.h> - - #define PFX "board_bcm963xx: " -@@ -878,6 +879,9 @@ int __init board_register_devices(void) - !board_get_mac_address(board.enet1.mac_addr)) - bcm63xx_enet_register(1, &board.enet1); - -+ if (board.has_ehci0) -+ bcm63xx_ehci_register(); -+ - if (board.has_ohci0) - bcm63xx_ohci_register(); - ---- /dev/null -+++ b/arch/mips/bcm63xx/dev-usb-ehci.c -@@ -0,0 +1,49 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr> -+ */ -+ -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/platform_device.h> -+#include <bcm63xx_cpu.h> -+#include <bcm63xx_dev_usb_ehci.h> -+ -+static struct resource ehci_resources[] = { -+ { -+ /* start & end filled at runtime */ -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ /* start filled at runtime */ -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static u64 ehci_dmamask = ~(u32)0; -+ -+static struct platform_device bcm63xx_ehci_device = { -+ .name = "bcm63xx_ehci", -+ .id = 0, -+ .num_resources = ARRAY_SIZE(ehci_resources), -+ .resource = ehci_resources, -+ .dev = { -+ .dma_mask = &ehci_dmamask, -+ .coherent_dma_mask = 0xffffffff, -+ }, -+}; -+ -+int __init bcm63xx_ehci_register(void) -+{ -+ if (!BCMCPU_IS_6358()) -+ return 0; -+ -+ ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0); -+ ehci_resources[0].end = ehci_resources[0].start; -+ ehci_resources[0].end += RSET_EHCI_SIZE - 1; -+ ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0); -+ return platform_device_register(&bcm63xx_ehci_device); -+} ---- /dev/null -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h -@@ -0,0 +1,6 @@ -+#ifndef BCM63XX_DEV_USB_EHCI_H_ -+#define BCM63XX_DEV_USB_EHCI_H_ -+ -+int bcm63xx_ehci_register(void); -+ -+#endif /* BCM63XX_DEV_USB_EHCI_H_ */ diff --git a/target/linux/brcm63xx/patches-2.6.35/010-add_bcm63xx_ohci_controller.patch b/target/linux/brcm63xx/patches-2.6.35/010-add_bcm63xx_ohci_controller.patch deleted file mode 100644 index 179421c..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/010-add_bcm63xx_ohci_controller.patch +++ /dev/null @@ -1,202 +0,0 @@ -Signed-off-by: Maxime Bizon <mbizon@freebox.fr> ---- - drivers/usb/host/ohci-bcm63xx.c | 166 +++++++++++++++++++++++++++++++++++++++ - drivers/usb/host/ohci-hcd.c | 5 + - drivers/usb/host/ohci.h | 2 +- - 3 files changed, 172 insertions(+), 1 deletions(-) - create mode 100644 drivers/usb/host/ohci-bcm63xx.c - ---- /dev/null -+++ b/drivers/usb/host/ohci-bcm63xx.c -@@ -0,0 +1,166 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr> -+ */ -+ -+#include <linux/init.h> -+#include <linux/clk.h> -+#include <linux/platform_device.h> -+#include <bcm63xx_cpu.h> -+#include <bcm63xx_regs.h> -+#include <bcm63xx_io.h> -+ -+static struct clk *usb_host_clock; -+ -+static int __devinit ohci_bcm63xx_start(struct usb_hcd *hcd) -+{ -+ struct ohci_hcd *ohci = hcd_to_ohci(hcd); -+ int ret; -+ -+ /* -+ * port 2 can be shared with USB slave, but all boards seem to -+ * have only one host port populated, so we can hardcode it -+ */ -+ ohci->num_ports = 1; -+ -+ ret = ohci_init(ohci); -+ if (ret < 0) -+ return ret; -+ -+ ret = ohci_run(ohci); -+ if (ret < 0) { -+ err("can't start %s", hcd->self.bus_name); -+ ohci_stop(hcd); -+ return ret; -+ } -+ return 0; -+} -+ -+static const struct hc_driver ohci_bcm63xx_hc_driver = { -+ .description = hcd_name, -+ .product_desc = "BCM63XX integrated OHCI controller", -+ .hcd_priv_size = sizeof(struct ohci_hcd), -+ -+ .irq = ohci_irq, -+ .flags = HCD_USB11 | HCD_MEMORY, -+ .start = ohci_bcm63xx_start, -+ .stop = ohci_stop, -+ .shutdown = ohci_shutdown, -+ .urb_enqueue = ohci_urb_enqueue, -+ .urb_dequeue = ohci_urb_dequeue, -+ .endpoint_disable = ohci_endpoint_disable, -+ .get_frame_number = ohci_get_frame, -+ .hub_status_data = ohci_hub_status_data, -+ .hub_control = ohci_hub_control, -+ .start_port_reset = ohci_start_port_reset, -+}; -+ -+static int __devinit ohci_hcd_bcm63xx_drv_probe(struct platform_device *pdev) -+{ -+ struct resource *res_mem; -+ struct usb_hcd *hcd; -+ struct ohci_hcd *ohci; -+ u32 reg; -+ int ret, irq; -+ -+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ irq = platform_get_irq(pdev, 0); -+ if (!res_mem || irq < 0) -+ return -ENODEV; -+ -+ if (BCMCPU_IS_6348()) { -+ struct clk *clk; -+ /* enable USB host clock */ -+ clk = clk_get(&pdev->dev, "usbh"); -+ if (IS_ERR(clk)) -+ return -ENODEV; -+ -+ clk_enable(clk); -+ usb_host_clock = clk; -+ bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG); -+ -+ } else if (BCMCPU_IS_6358()) { -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_REG); -+ reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK; -+ reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_REG); -+ /* -+ * The magic value comes for the original vendor BSP -+ * and is needed for USB to work. Datasheet does not -+ * help, so the magic value is used as-is. -+ */ -+ bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, USBH_PRIV_TEST_REG); -+ } else -+ return 0; -+ -+ hcd = usb_create_hcd(&ohci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx"); -+ if (!hcd) -+ return -ENOMEM; -+ hcd->rsrc_start = res_mem->start; -+ hcd->rsrc_len = res_mem->end - res_mem->start + 1; -+ -+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { -+ pr_debug("request_mem_region failed\n"); -+ ret = -EBUSY; -+ goto out; -+ } -+ -+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); -+ if (!hcd->regs) { -+ pr_debug("ioremap failed\n"); -+ ret = -EIO; -+ goto out1; -+ } -+ -+ ohci = hcd_to_ohci(hcd); -+ ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC | -+ OHCI_QUIRK_FRAME_NO; -+ ohci_hcd_init(ohci); -+ -+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); -+ if (ret) -+ goto out2; -+ -+ platform_set_drvdata(pdev, hcd); -+ return 0; -+ -+out2: -+ iounmap(hcd->regs); -+out1: -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+out: -+ usb_put_hcd(hcd); -+ return ret; -+} -+ -+static int __devexit ohci_hcd_bcm63xx_drv_remove(struct platform_device *pdev) -+{ -+ struct usb_hcd *hcd; -+ -+ hcd = platform_get_drvdata(pdev); -+ usb_remove_hcd(hcd); -+ iounmap(hcd->regs); -+ usb_put_hcd(hcd); -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+ if (usb_host_clock) { -+ clk_disable(usb_host_clock); -+ clk_put(usb_host_clock); -+ } -+ platform_set_drvdata(pdev, NULL); -+ return 0; -+} -+ -+static struct platform_driver ohci_hcd_bcm63xx_driver = { -+ .probe = ohci_hcd_bcm63xx_drv_probe, -+ .remove = __devexit_p(ohci_hcd_bcm63xx_drv_remove), -+ .shutdown = usb_hcd_platform_shutdown, -+ .driver = { -+ .name = "bcm63xx_ohci", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+MODULE_ALIAS("platform:bcm63xx_ohci"); ---- a/drivers/usb/host/ohci-hcd.c -+++ b/drivers/usb/host/ohci-hcd.c -@@ -1061,6 +1061,11 @@ MODULE_LICENSE ("GPL"); - #define PLATFORM_DRIVER ohci_hcd_da8xx_driver - #endif - -+#ifdef CONFIG_BCM63XX -+#include "ohci-bcm63xx.c" -+#define PLATFORM_DRIVER ohci_hcd_bcm63xx_driver -+#endif -+ - #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_CPU_SUBTYPE_SH7763) || \ ---- a/drivers/usb/host/ohci.h -+++ b/drivers/usb/host/ohci.h -@@ -655,7 +655,7 @@ static inline u32 hc32_to_cpup (const st - * some big-endian SOC implementations. Same thing happens with PSW access. - */ - --#ifdef CONFIG_PPC_MPC52xx -+#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_BCM63XX) - #define big_endian_frame_no_quirk(ohci) (ohci->flags & OHCI_QUIRK_FRAME_NO) - #else - #define big_endian_frame_no_quirk(ohci) 0 diff --git a/target/linux/brcm63xx/patches-2.6.35/011-add_bcm63xx_ehci_controller.patch b/target/linux/brcm63xx/patches-2.6.35/011-add_bcm63xx_ehci_controller.patch deleted file mode 100644 index 331753b..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/011-add_bcm63xx_ehci_controller.patch +++ /dev/null @@ -1,178 +0,0 @@ -Signed-off-by: Maxime Bizon <mbizon@freebox.fr> ---- - drivers/usb/host/ehci-bcm63xx.c | 154 +++++++++++++++++++++++++++++++++++++++ - drivers/usb/host/ehci-hcd.c | 5 + - 2 files changed, 159 insertions(+), 0 deletions(-) - create mode 100644 drivers/usb/host/ehci-bcm63xx.c - ---- /dev/null -+++ b/drivers/usb/host/ehci-bcm63xx.c -@@ -0,0 +1,154 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> -+ */ -+ -+#include <linux/init.h> -+#include <linux/platform_device.h> -+#include <bcm63xx_cpu.h> -+#include <bcm63xx_regs.h> -+#include <bcm63xx_io.h> -+ -+static int ehci_bcm63xx_setup(struct usb_hcd *hcd) -+{ -+ struct ehci_hcd *ehci = hcd_to_ehci(hcd); -+ int retval; -+ -+ retval = ehci_halt(ehci); -+ if (retval) -+ return retval; -+ -+ retval = ehci_init(hcd); -+ if (retval) -+ return retval; -+ -+ ehci_reset(ehci); -+ ehci_port_power(ehci, 0); -+ -+ return retval; -+} -+ -+ -+static const struct hc_driver ehci_bcm63xx_hc_driver = { -+ .description = hcd_name, -+ .product_desc = "BCM63XX integrated EHCI controller", -+ .hcd_priv_size = sizeof(struct ehci_hcd), -+ -+ .irq = ehci_irq, -+ .flags = HCD_MEMORY | HCD_USB2, -+ -+ .reset = ehci_bcm63xx_setup, -+ .start = ehci_run, -+ .stop = ehci_stop, -+ .shutdown = ehci_shutdown, -+ -+ .urb_enqueue = ehci_urb_enqueue, -+ .urb_dequeue = ehci_urb_dequeue, -+ .endpoint_disable = ehci_endpoint_disable, -+ -+ .get_frame_number = ehci_get_frame, -+ -+ .hub_status_data = ehci_hub_status_data, -+ .hub_control = ehci_hub_control, -+ .bus_suspend = ehci_bus_suspend, -+ .bus_resume = ehci_bus_resume, -+ .relinquish_port = ehci_relinquish_port, -+ .port_handed_over = ehci_port_handed_over, -+}; -+ -+static int __devinit ehci_hcd_bcm63xx_drv_probe(struct platform_device *pdev) -+{ -+ struct resource *res_mem; -+ struct usb_hcd *hcd; -+ struct ehci_hcd *ehci; -+ u32 reg; -+ int ret, irq; -+ -+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ irq = platform_get_irq(pdev, 0);; -+ if (!res_mem || irq < 0) -+ return -ENODEV; -+ -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_REG); -+ reg &= ~USBH_PRIV_SWAP_EHCI_DATA_MASK; -+ reg |= USBH_PRIV_SWAP_EHCI_ENDN_MASK; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_REG); -+ -+ /* -+ * The magic value comes for the original vendor BSP and is -+ * needed for USB to work. Datasheet does not help, so the -+ * magic value is used as-is. -+ */ -+ bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, USBH_PRIV_TEST_REG); -+ -+ hcd = usb_create_hcd(&ehci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx"); -+ if (!hcd) -+ return -ENOMEM; -+ hcd->rsrc_start = res_mem->start; -+ hcd->rsrc_len = res_mem->end - res_mem->start + 1; -+ -+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { -+ pr_debug("request_mem_region failed\n"); -+ ret = -EBUSY; -+ goto out; -+ } -+ -+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); -+ if (!hcd->regs) { -+ pr_debug("ioremap failed\n"); -+ ret = -EIO; -+ goto out1; -+ } -+ -+ ehci = hcd_to_ehci(hcd); -+ ehci->big_endian_mmio = 1; -+ ehci->big_endian_desc = 0; -+ ehci->caps = hcd->regs; -+ ehci->regs = hcd->regs + -+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); -+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); -+ ehci->sbrn = 0x20; -+ -+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); -+ if (ret) -+ goto out2; -+ -+ platform_set_drvdata(pdev, hcd); -+ return 0; -+ -+out2: -+ iounmap(hcd->regs); -+out1: -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+out: -+ usb_put_hcd(hcd); -+ return ret; -+} -+ -+static int __devexit ehci_hcd_bcm63xx_drv_remove(struct platform_device *pdev) -+{ -+ struct usb_hcd *hcd; -+ -+ hcd = platform_get_drvdata(pdev); -+ usb_remove_hcd(hcd); -+ iounmap(hcd->regs); -+ usb_put_hcd(hcd); -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+ platform_set_drvdata(pdev, NULL); -+ return 0; -+} -+ -+static struct platform_driver ehci_hcd_bcm63xx_driver = { -+ .probe = ehci_hcd_bcm63xx_drv_probe, -+ .remove = __devexit_p(ehci_hcd_bcm63xx_drv_remove), -+ .shutdown = usb_hcd_platform_shutdown, -+ .driver = { -+ .name = "bcm63xx_ehci", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+MODULE_ALIAS("platform:bcm63xx_ehci"); ---- a/drivers/usb/host/ehci-hcd.c -+++ b/drivers/usb/host/ehci-hcd.c -@@ -1158,6 +1158,11 @@ MODULE_LICENSE ("GPL"); - #define PLATFORM_DRIVER ehci_atmel_driver - #endif - -+#ifdef CONFIG_BCM63XX -+#include "ehci-bcm63xx.c" -+#define PLATFORM_DRIVER ehci_hcd_bcm63xx_driver -+#endif -+ - #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ - !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ - !defined(XILINX_OF_PLATFORM_DRIVER) diff --git a/target/linux/brcm63xx/patches-2.6.35/020-watchdog.patch b/target/linux/brcm63xx/patches-2.6.35/020-watchdog.patch deleted file mode 100644 index 2a75d06..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/020-watchdog.patch +++ /dev/null @@ -1,386 +0,0 @@ ---- a/drivers/watchdog/Makefile -+++ b/drivers/watchdog/Makefile -@@ -114,6 +114,7 @@ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt - obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o - obj-$(CONFIG_AR7_WDT) += ar7_wdt.o - obj-$(CONFIG_TXX9_WDT) += txx9wdt.o -+obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o - - # PARISC Architecture - ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -875,6 +875,16 @@ config TXX9_WDT - help - Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. - -+config BCM63XX_WDT -+ tristate "Broadcom BCM63xx hardware watchdog" -+ depends on BCM63XX -+ help -+ Watchdog driver for the built in watchdog hardware in Broadcom -+ BCM63xx SoC. -+ -+ To compile thi driver as a loadable module, choose M here. -+ The module will be called bcm63xx_wdt. -+ - # PARISC Architecture - - # POWERPC Architecture ---- /dev/null -+++ b/drivers/watchdog/bcm63xx_wdt.c -@@ -0,0 +1,354 @@ -+/* -+ * Broadcom BCM63xx SoC watchdog driver -+ * -+ * Copyright (C) 2007, Miguel Gaio <miguel.gaio@efixo.com> -+ * Copyright (C) 2008, Florian Fainelli <florian@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ */ -+ -+#include <linux/bitops.h> -+#include <linux/errno.h> -+#include <linux/fs.h> -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/miscdevice.h> -+#include <linux/module.h> -+#include <linux/moduleparam.h> -+#include <linux/reboot.h> -+#include <linux/types.h> -+#include <linux/uaccess.h> -+#include <linux/watchdog.h> -+#include <linux/timer.h> -+#include <linux/jiffies.h> -+#include <linux/interrupt.h> -+#include <linux/ptrace.h> -+#include <linux/resource.h> -+#include <linux/platform_device.h> -+ -+#include <bcm63xx_cpu.h> -+#include <bcm63xx_io.h> -+#include <bcm63xx_regs.h> -+#include <bcm63xx_timer.h> -+ -+#define PFX KBUILD_MODNAME -+ -+#define WDT_HZ 50000000 /* Fclk */ -+#define WDT_DEFAULT_TIME 30 /* seconds */ -+#define WDT_MAX_TIME 256 /* seconds */ -+ -+static struct { -+ void __iomem *regs; -+ struct timer_list timer; -+ int default_ticks; -+ unsigned long inuse; -+ atomic_t ticks; -+} bcm63xx_wdt_device; -+ -+static int expect_close; -+ -+static int wdt_time = WDT_DEFAULT_TIME; -+static int nowayout = WATCHDOG_NOWAYOUT; -+module_param(nowayout, int, 0); -+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" -+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); -+ -+/* HW functions */ -+static void bcm63xx_wdt_hw_start(void) -+{ -+ bcm_writel(0xfffffffe, bcm63xx_wdt_device.regs + WDT_DEFVAL_REG); -+ bcm_writel(WDT_START_1, bcm63xx_wdt_device.regs + WDT_CTL_REG); -+ bcm_writel(WDT_START_2, bcm63xx_wdt_device.regs + WDT_CTL_REG); -+} -+ -+static void bcm63xx_wdt_hw_stop(void) -+{ -+ bcm_writel(WDT_STOP_1, bcm63xx_wdt_device.regs + WDT_CTL_REG); -+ bcm_writel(WDT_STOP_2, bcm63xx_wdt_device.regs + WDT_CTL_REG); -+} -+ -+static void bcm63xx_wdt_isr(void *data) -+{ -+ struct pt_regs *regs = get_irq_regs(); -+ -+ die(PFX " fire", regs); -+} -+ -+static void bcm63xx_timer_tick(unsigned long unused) -+{ -+ if (!atomic_dec_and_test(&bcm63xx_wdt_device.ticks)) { -+ bcm63xx_wdt_hw_start(); -+ mod_timer(&bcm63xx_wdt_device.timer, jiffies + HZ); -+ } else -+ printk(KERN_CRIT PFX ": watchdog will restart system\n"); -+} -+ -+static void bcm63xx_wdt_pet(void) -+{ -+ atomic_set(&bcm63xx_wdt_device.ticks, wdt_time); -+} -+ -+static void bcm63xx_wdt_start(void) -+{ -+ bcm63xx_wdt_pet(); -+ bcm63xx_timer_tick(0); -+} -+ -+static void bcm63xx_wdt_pause(void) -+{ -+ del_timer_sync(&bcm63xx_wdt_device.timer); -+ bcm63xx_wdt_hw_stop(); -+} -+ -+static int bcm63xx_wdt_settimeout(int new_time) -+{ -+ if ((new_time <= 0) || (new_time > WDT_MAX_TIME)) -+ return -EINVAL; -+ -+ wdt_time = new_time; -+ -+ return 0; -+} -+ -+static int bcm63xx_wdt_open(struct inode *inode, struct file *file) -+{ -+ if (test_and_set_bit(0, &bcm63xx_wdt_device.inuse)) -+ return -EBUSY; -+ -+ bcm63xx_wdt_start(); -+ return nonseekable_open(inode, file); -+} -+ -+static int bcm63xx_wdt_release(struct inode *inode, struct file *file) -+{ -+ if (expect_close == 42) -+ bcm63xx_wdt_pause(); -+ else { -+ printk(KERN_CRIT PFX -+ ": Unexpected close, not stopping watchdog!\n"); -+ bcm63xx_wdt_start(); -+ } -+ clear_bit(0, &bcm63xx_wdt_device.inuse); -+ expect_close = 0; -+ return 0; -+} -+ -+static ssize_t bcm63xx_wdt_write(struct file *file, const char *data, -+ size_t len, loff_t *ppos) -+{ -+ if (len) { -+ if (!nowayout) { -+ size_t i; -+ -+ /* In case it was set long ago */ -+ expect_close = 0; -+ -+ for (i = 0; i != len; i++) { -+ char c; -+ if (get_user(c, data + i)) -+ return -EFAULT; -+ if (c == 'V') -+ expect_close = 42; -+ } -+ } -+ bcm63xx_wdt_pet(); -+ } -+ return len; -+} -+ -+static struct watchdog_info bcm63xx_wdt_info = { -+ .identity = PFX, -+ .options = WDIOF_SETTIMEOUT | -+ WDIOF_KEEPALIVEPING | -+ WDIOF_MAGICCLOSE, -+}; -+ -+ -+static long bcm63xx_wdt_ioctl(struct file *file, unsigned int cmd, -+ unsigned long arg) -+{ -+ void __user *argp = (void __user *)arg; -+ int __user *p = argp; -+ int new_value, retval = -EINVAL; -+ -+ switch (cmd) { -+ case WDIOC_GETSUPPORT: -+ return copy_to_user(argp, &bcm63xx_wdt_info, -+ sizeof(bcm63xx_wdt_info)) ? -EFAULT : 0; -+ -+ case WDIOC_GETSTATUS: -+ case WDIOC_GETBOOTSTATUS: -+ return put_user(0, p); -+ -+ case WDIOC_SETOPTIONS: -+ if (get_user(new_value, p)) -+ return -EFAULT; -+ -+ if (new_value & WDIOS_DISABLECARD) { -+ bcm63xx_wdt_pause(); -+ retval = 0; -+ } -+ if (new_value & WDIOS_ENABLECARD) { -+ bcm63xx_wdt_start(); -+ retval = 0; -+ } -+ -+ return retval; -+ -+ case WDIOC_KEEPALIVE: -+ bcm63xx_wdt_pet(); -+ return 0; -+ -+ case WDIOC_SETTIMEOUT: -+ if (get_user(new_value, p)) -+ return -EFAULT; -+ -+ if (bcm63xx_wdt_settimeout(new_value)) -+ return -EINVAL; -+ -+ bcm63xx_wdt_pet(); -+ -+ case WDIOC_GETTIMEOUT: -+ return put_user(wdt_time, p); -+ -+ default: -+ return -ENOTTY; -+ -+ } -+} -+ -+static int bcm63xx_wdt_notify_sys(struct notifier_block *this, -+ unsigned long code, void *unused) -+{ -+ if (code == SYS_DOWN || code == SYS_HALT) -+ bcm63xx_wdt_pause(); -+ return NOTIFY_DONE; -+} -+ -+static const struct file_operations bcm63xx_wdt_fops = { -+ .owner = THIS_MODULE, -+ .llseek = no_llseek, -+ .write = bcm63xx_wdt_write, -+ .unlocked_ioctl = bcm63xx_wdt_ioctl, -+ .open = bcm63xx_wdt_open, -+ .release = bcm63xx_wdt_release, -+}; -+ -+static struct miscdevice bcm63xx_wdt_miscdev = { -+ .minor = WATCHDOG_MINOR, -+ .name = "watchdog", -+ .fops = &bcm63xx_wdt_fops, -+}; -+ -+static struct notifier_block bcm63xx_wdt_notifier = { -+ .notifier_call = bcm63xx_wdt_notify_sys, -+}; -+ -+ -+static int bcm63xx_wdt_probe(struct platform_device *pdev) -+{ -+ int ret; -+ struct resource *r; -+ -+ setup_timer(&bcm63xx_wdt_device.timer, bcm63xx_timer_tick, 0L); -+ -+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!r) { -+ printk(KERN_ERR PFX -+ "failed to retrieve resources\n"); -+ return -ENODEV; -+ } -+ -+ bcm63xx_wdt_device.regs = ioremap_nocache(r->start, r->end - r->start); -+ if (!bcm63xx_wdt_device.regs) { -+ printk(KERN_ERR PFX -+ "failed to remap I/O resources\n"); -+ return -ENXIO; -+ } -+ -+ ret = bcm63xx_timer_register(TIMER_WDT_ID, bcm63xx_wdt_isr, NULL); -+ if (ret < 0) { -+ printk(KERN_ERR PFX -+ "failed to register wdt timer isr\n"); -+ goto unmap; -+ } -+ -+ if (bcm63xx_wdt_settimeout(wdt_time)) { -+ bcm63xx_wdt_settimeout(WDT_DEFAULT_TIME); -+ printk(KERN_INFO PFX -+ ": wdt_time value must be 1 <= wdt_time <= 256, using %d\n", -+ wdt_time); -+ } -+ -+ ret = register_reboot_notifier(&bcm63xx_wdt_notifier); -+ if (ret) { -+ printk(KERN_ERR PFX -+ "failed to register reboot_notifier\n"); -+ goto unregister_timer; -+ } -+ -+ ret = misc_register(&bcm63xx_wdt_miscdev); -+ if (ret < 0) { -+ printk(KERN_ERR PFX -+ "failed to register watchdog device\n"); -+ goto unregister_reboot_notifier; -+ } -+ -+ printk(KERN_INFO PFX " started, timer margin: %d sec\n", WDT_DEFAULT_TIME); -+ -+ return 0; -+ -+unregister_reboot_notifier: -+ unregister_reboot_notifier(&bcm63xx_wdt_notifier); -+unregister_timer: -+ bcm63xx_timer_unregister(TIMER_WDT_ID); -+unmap: -+ iounmap(bcm63xx_wdt_device.regs); -+ return ret; -+} -+ -+static int bcm63xx_wdt_remove(struct platform_device *pdev) -+{ -+ if (!nowayout) -+ bcm63xx_wdt_pause(); -+ -+ misc_deregister(&bcm63xx_wdt_miscdev); -+ -+ iounmap(bcm63xx_wdt_device.regs); -+ -+ unregister_reboot_notifier(&bcm63xx_wdt_notifier); -+ bcm63xx_timer_unregister(TIMER_WDT_ID); -+ -+ return 0; -+} -+ -+static struct platform_driver bcm63xx_wdt = { -+ .probe = bcm63xx_wdt_probe, -+ .remove = bcm63xx_wdt_remove, -+ .driver = { -+ .name = "bcm63xx-wdt", -+ } -+}; -+ -+static int __init bcm63xx_wdt_init(void) -+{ -+ return platform_driver_register(&bcm63xx_wdt); -+} -+ -+static void __exit bcm63xx_wdt_exit(void) -+{ -+ platform_driver_unregister(&bcm63xx_wdt); -+} -+ -+module_init(bcm63xx_wdt_init); -+module_exit(bcm63xx_wdt_exit); -+ -+MODULE_AUTHOR("Miguel Gaio <miguel.gaio@efixo.com>"); -+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>"); -+MODULE_DESCRIPTION("Driver for the Broadcom BCM63xx SoC watchdog"); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -+MODULE_ALIAS("platform:bcm63xx-wdt"); diff --git a/target/linux/brcm63xx/patches-2.6.35/040-bcm963xx_flashmap.patch b/target/linux/brcm63xx/patches-2.6.35/040-bcm963xx_flashmap.patch deleted file mode 100644 index 29c4f85..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/040-bcm963xx_flashmap.patch +++ /dev/null @@ -1,389 +0,0 @@ -From e734ace5baa04e0e8af1d4483475fbd6bd2b32a1 Mon Sep 17 00:00:00 2001 -From: Axel Gembe <ago@bastart.eu.org> -Date: Mon, 12 May 2008 18:54:09 +0200 -Subject: [PATCH] bcm963xx: flashmap support - - -Signed-off-by: Axel Gembe <ago@bastart.eu.org> ---- - drivers/mtd/maps/Kconfig | 7 +++++++ - drivers/mtd/maps/Makefile | 1 + - drivers/mtd/redboot.c | 13 ++++++++++--- - 3 files changed, 18 insertions(+), 3 deletions(-) - ---- a/drivers/mtd/maps/Kconfig -+++ b/drivers/mtd/maps/Kconfig -@@ -251,6 +251,13 @@ config MTD_NETtel - help - Support for flash chips on NETtel/SecureEdge/SnapGear boards. - -+config MTD_BCM963XX -+ tristate "BCM963xx Flash device" -+ depends on MIPS && BCM63XX -+ help -+ Flash memory access on BCM963xx boards. Currently only works with -+ RedBoot and CFE. -+ - config MTD_DILNETPC - tristate "CFI Flash device mapped on DIL/Net PC" - depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN ---- a/drivers/mtd/redboot.c -+++ b/drivers/mtd/redboot.c -@@ -39,7 +39,7 @@ static inline int redboot_checksum(struc - return 1; - } - --static int parse_redboot_partitions(struct mtd_info *master, -+int parse_redboot_partitions(struct mtd_info *master, - struct mtd_partition **pparts, - unsigned long fis_origin) - { -@@ -162,6 +162,14 @@ static int parse_redboot_partitions(stru - goto out; - } - -+ if (!fis_origin) { -+ for (i = 0; i < numslots; i++) { -+ if (!strncmp(buf[i].name, "RedBoot", 8)) { -+ fis_origin = (buf[i].flash_base & (master->size << 1) - 1); -+ } -+ } -+ } -+ - for (i = 0; i < numslots; i++) { - struct fis_list *new_fl, **prev; - -@@ -184,9 +192,8 @@ static int parse_redboot_partitions(stru - new_fl->img = &buf[i]; - if (fis_origin) { - buf[i].flash_base -= fis_origin; -- } else { -- buf[i].flash_base &= master->size-1; - } -+ buf[i].flash_base &= (master->size << 1) - 1; - - /* I'm sure the JFFS2 code has done me permanent damage. - * I now think the following is _normal_ ---- a/drivers/mtd/maps/Makefile -+++ b/drivers/mtd/maps/Makefile -@@ -59,3 +59,4 @@ obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-asy - obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o - obj-$(CONFIG_MTD_VMU) += vmu-flash.o - obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o -+obj-$(CONFIG_MTD_BCM963XX) += bcm963xx-flash.o ---- /dev/null -+++ b/drivers/mtd/maps/bcm963xx-flash.c -@@ -0,0 +1,276 @@ -+/* -+ * Copyright (C) 2006-2008 Florian Fainelli <florian@openwrt.org> -+ * Mike Albon <malbon@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ */ -+ -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/mtd/map.h> -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/partitions.h> -+#include <linux/slab.h> -+#include <linux/vmalloc.h> -+#include <linux/platform_device.h> -+#include <linux/magic.h> -+#include <linux/jffs2.h> -+ -+#include <bcm_tag.h> -+#include <asm/io.h> -+ -+#define BUSWIDTH 2 /* Buswidth */ -+#define EXTENDED_SIZE 0xBFC00000 /* Extended flash address */ -+ -+#define PFX KBUILD_MODNAME ": " -+ -+struct squashfs_super_block { -+ __le32 s_magic; -+ __le32 pad0[9]; -+ __le64 bytes_used; -+}; -+ -+extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts, unsigned long fis_origin); -+static struct mtd_partition *parsed_parts; -+ -+static struct mtd_info *bcm963xx_mtd_info; -+ -+static struct map_info bcm963xx_map = { -+ .name = "bcm963xx", -+ .bankwidth = BUSWIDTH, -+}; -+ -+static int parse_cfe_partitions( struct mtd_info *master, struct mtd_partition **pparts) -+{ -+ int nrparts = 3, curpart = 0; /* CFE,NVRAM and global LINUX are always present. */ -+ struct bcm_tag *buf; -+ struct mtd_partition *parts; -+ int ret; -+ size_t retlen; -+ unsigned int rootfsaddr, kerneladdr, spareaddr; -+ unsigned int rootfslen, kernellen, sparelen; -+ int namelen = 0; -+ int i, offset; -+ char *boardid; -+ char *tagversion; -+ -+ /* Allocate memory for buffer */ -+ buf = vmalloc(sizeof(struct bcm_tag)); -+ if (!buf) -+ return -ENOMEM; -+ -+ /* Get the tag */ -+ ret = master->read(master, master->erasesize, sizeof(struct bcm_tag), &retlen, (void *)buf); -+ if (retlen != sizeof(struct bcm_tag)){ -+ vfree(buf); -+ return -EIO; -+ } -+ -+ sscanf(buf->kernelAddress, "%u", &kerneladdr); -+ sscanf(buf->kernelLength, "%u", &kernellen); -+ rootfslen = *(uint32_t *)(&(buf->rootLength[0])); -+ tagversion = &(buf->tagVersion[0]); -+ boardid = &(buf->boardid[0]); -+ -+ printk(KERN_INFO PFX "CFE boot tag found with version %s and board type %s\n",tagversion, boardid); -+ -+ kerneladdr = kerneladdr - EXTENDED_SIZE; -+ rootfsaddr = kerneladdr + kernellen; -+ -+ rootfslen = ( ( rootfslen % master->erasesize ) > 0 ? (((rootfslen / master->erasesize) + 1 ) * master->erasesize) : rootfslen); -+ -+ spareaddr = rootfsaddr + rootfslen; -+ sparelen = master->size - spareaddr - master->erasesize; -+ -+ /* Determine number of partitions */ -+ namelen = 8; -+ if (rootfslen > 0){ -+ nrparts++; -+ namelen =+ 6; -+ }; -+ if (kernellen > 0) { -+ nrparts++; -+ namelen =+ 6; -+ }; -+ -+ /* Ask kernel for more memory */ -+ parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL); -+ if (!parts) { -+ vfree(buf); -+ return -ENOMEM; -+ }; -+ -+ /* Start building partition list */ -+ parts[curpart].name = "CFE"; -+ parts[curpart].offset = 0; -+ parts[curpart].size = master->erasesize; -+ curpart++; -+ -+ if (kernellen > 0) { -+ parts[curpart].name = "kernel"; -+ parts[curpart].offset = kerneladdr; -+ parts[curpart].size = kernellen; -+ curpart++; -+ }; -+ -+ if (rootfslen > 0) { -+ parts[curpart].name = "rootfs"; -+ parts[curpart].offset = rootfsaddr; -+ parts[curpart].size = rootfslen; -+ if (sparelen > 0) -+ parts[curpart].size += sparelen; -+ curpart++; -+ }; -+ -+ parts[curpart].name = "nvram"; -+ parts[curpart].offset = master->size - master->erasesize; -+ parts[curpart].size = master->erasesize; -+ -+ /* Global partition "linux" to make easy firmware upgrade */ -+ curpart++; -+ parts[curpart].name = "linux"; -+ parts[curpart].offset = parts[0].size; -+ parts[curpart].size = master->size - parts[0].size - parts[3].size; -+ -+ for (i = 0; i < nrparts; i++) -+ printk(KERN_INFO PFX "Partition %d is %s offset %lx and length %lx\n", i, parts[i].name, (long unsigned int)(parts[i].offset), (long unsigned int)(parts[i].size)); -+ -+ printk(KERN_INFO PFX "Spare partition is %x offset and length %x\n", spareaddr, sparelen); -+ *pparts = parts; -+ vfree(buf); -+ -+ return nrparts; -+}; -+ -+static int bcm963xx_detect_cfe(struct mtd_info *master) -+{ -+ int idoffset = 0x4e0; -+ static char idstring[8] = "CFE1CFE1"; -+ char buf[9]; -+ int ret; -+ size_t retlen; -+ -+ ret = master->read(master, idoffset, 8, &retlen, (void *)buf); -+ buf[retlen] = 0; -+ printk(KERN_INFO PFX "Read Signature value of %s\n", buf); -+ -+ return strncmp(idstring, buf, 8); -+} -+ -+static int bcm963xx_probe(struct platform_device *pdev) -+{ -+ int err = 0; -+ int parsed_nr_parts = 0; -+ char *part_type; -+ struct resource *r; -+ -+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ bcm963xx_map.phys = r->start; -+ bcm963xx_map.size = (r->end - r->start) + 1; -+ bcm963xx_map.virt = ioremap(r->start, r->end - r->start + 1); -+ -+ if (!bcm963xx_map.virt) { -+ printk(KERN_ERR PFX "Failed to ioremap\n"); -+ return -EIO; -+ } -+ printk(KERN_INFO PFX "0x%08lx at 0x%08x\n", bcm963xx_map.size, bcm963xx_map.phys); -+ -+ simple_map_init(&bcm963xx_map); -+ -+ bcm963xx_mtd_info = do_map_probe("cfi_probe", &bcm963xx_map); -+ if (!bcm963xx_mtd_info) { -+ printk(KERN_ERR PFX "Failed to probe using CFI\n"); -+ err = -EIO; -+ goto err_probe; -+ } -+ -+ bcm963xx_mtd_info->owner = THIS_MODULE; -+ -+ /* This is mutually exclusive */ -+ if (bcm963xx_detect_cfe(bcm963xx_mtd_info) == 0) { -+ printk(KERN_INFO PFX "CFE bootloader detected\n"); -+ if (parsed_nr_parts == 0) { -+ int ret = parse_cfe_partitions(bcm963xx_mtd_info, &parsed_parts); -+ if (ret > 0) { -+ part_type = "CFE"; -+ parsed_nr_parts = ret; -+ } -+ } -+ } else { -+ printk(KERN_INFO PFX "assuming RedBoot bootloader\n"); -+ if (bcm963xx_mtd_info->size > 0x00400000) { -+ printk(KERN_INFO PFX "Support for extended flash memory size : 0x%lx ; ONLY 64MBIT SUPPORT\n", bcm963xx_mtd_info->size); -+ bcm963xx_map.virt = (u32)(EXTENDED_SIZE); -+ } -+ -+#ifdef CONFIG_MTD_REDBOOT_PARTS -+ if (parsed_nr_parts == 0) { -+ int ret = parse_redboot_partitions(bcm963xx_mtd_info, &parsed_parts, 0); -+ if (ret > 0) { -+ part_type = "RedBoot"; -+ parsed_nr_parts = ret; -+ } -+ } -+#endif -+ } -+ -+ return add_mtd_partitions(bcm963xx_mtd_info, parsed_parts, parsed_nr_parts); -+ -+err_probe: -+ iounmap(bcm963xx_map.virt); -+ return err; -+} -+ -+static int bcm963xx_remove(struct platform_device *pdev) -+{ -+ if (bcm963xx_mtd_info) { -+ del_mtd_partitions(bcm963xx_mtd_info); -+ map_destroy(bcm963xx_mtd_info); -+ } -+ -+ if (bcm963xx_map.virt) { -+ iounmap(bcm963xx_map.virt); -+ bcm963xx_map.virt = 0; -+ } -+ -+ return 0; -+} -+ -+static struct platform_driver bcm63xx_mtd_dev = { -+ .probe = bcm963xx_probe, -+ .remove = bcm963xx_remove, -+ .driver = { -+ .name = "bcm963xx-flash", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init bcm963xx_mtd_init(void) -+{ -+ return platform_driver_register(&bcm63xx_mtd_dev); -+} -+ -+static void __exit bcm963xx_mtd_exit(void) -+{ -+ platform_driver_unregister(&bcm63xx_mtd_dev); -+} -+ -+module_init(bcm963xx_mtd_init); -+module_exit(bcm963xx_mtd_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION("Broadcom BCM63xx MTD partition parser/mapping for CFE and RedBoot"); -+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>"); -+MODULE_AUTHOR("Mike Albon <malbon@openwrt.org>"); ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -816,20 +816,6 @@ void __init board_setup(void) - panic("unexpected CPU for bcm963xx board"); - } - --static struct mtd_partition mtd_partitions[] = { -- { -- .name = "cfe", -- .offset = 0x0, -- .size = 0x40000, -- } --}; -- --static struct physmap_flash_data flash_data = { -- .width = 2, -- .nr_parts = ARRAY_SIZE(mtd_partitions), -- .parts = mtd_partitions, --}; -- - static struct resource mtd_resources[] = { - { - .start = 0, /* filled at runtime */ -@@ -839,12 +825,9 @@ static struct resource mtd_resources[] = - }; - - static struct platform_device mtd_dev = { -- .name = "physmap-flash", -+ .name = "bcm963xx-flash", - .resource = mtd_resources, - .num_resources = ARRAY_SIZE(mtd_resources), -- .dev = { -- .platform_data = &flash_data, -- }, - }; - - static struct gpio_led_platform_data bcm63xx_led_data; diff --git a/target/linux/brcm63xx/patches-2.6.35/070_bcm63xx_enet_vlan_incoming_fixed.patch b/target/linux/brcm63xx/patches-2.6.35/070_bcm63xx_enet_vlan_incoming_fixed.patch deleted file mode 100644 index e9fe0d9..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/070_bcm63xx_enet_vlan_incoming_fixed.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/net/bcm63xx_enet.c -+++ b/drivers/net/bcm63xx_enet.c -@@ -1520,7 +1520,7 @@ static int compute_hw_mtu(struct bcm_ene - actual_mtu = mtu; - - /* add ethernet header + vlan tag size */ -- actual_mtu += VLAN_ETH_HLEN; -+ actual_mtu += VLAN_ETH_HLEN + VLAN_HLEN; - - if (actual_mtu < 64 || actual_mtu > BCMENET_MAX_MTU) - return -EINVAL; diff --git a/target/linux/brcm63xx/patches-2.6.35/100-reset_buttons.patch b/target/linux/brcm63xx/patches-2.6.35/100-reset_buttons.patch deleted file mode 100644 index 786c18b..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/100-reset_buttons.patch +++ /dev/null @@ -1,98 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -15,6 +15,8 @@ - #include <linux/mtd/partitions.h> - #include <linux/mtd/physmap.h> - #include <linux/ssb/ssb.h> -+#include <linux/gpio_buttons.h> -+#include <linux/input.h> - #include <asm/addrspace.h> - #include <bcm63xx_board.h> - #include <bcm63xx_cpu.h> -@@ -296,6 +298,16 @@ static struct board_info __initdata boar - .active_low = 1, - }, - }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 33, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, - }; - - static struct board_info __initdata board_96348gw = { -@@ -354,6 +366,16 @@ static struct board_info __initdata boar - .active_low = 1, - }, - }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 36, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, - }; - - static struct board_info __initdata board_FAST2404 = { -@@ -838,12 +860,23 @@ static struct platform_device bcm63xx_gp - .dev.platform_data = &bcm63xx_led_data, - }; - -+static struct gpio_buttons_platform_data bcm63xx_gpio_buttons_data = { -+ .poll_interval = 20, -+}; -+ -+static struct platform_device bcm63xx_gpio_buttons_device = { -+ .name = "gpio-buttons", -+ .id = 0, -+ .dev.platform_data = &bcm63xx_gpio_buttons_data, -+}; -+ - /* - * third stage init callback, register all board devices. - */ - int __init board_register_devices(void) - { - u32 val; -+ int button_count = 0; - - if (board.has_uart0) - bcm63xx_uart_register(0); -@@ -888,5 +921,16 @@ int __init board_register_devices(void) - - platform_device_register(&bcm63xx_gpio_leds); - -+ /* count number of BUTTONs defined by this device */ -+ while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc) -+ button_count++; -+ -+ if (button_count) { -+ bcm63xx_gpio_buttons_data.nbuttons = button_count; -+ bcm63xx_gpio_buttons_data.buttons = board.buttons; -+ -+ platform_device_register(&bcm63xx_gpio_buttons_device); -+ } -+ - return 0; - } ---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -@@ -57,6 +57,9 @@ struct board_info { - - /* GPIO LEDs */ - struct gpio_led leds[5]; -+ -+ /* Buttons */ -+ struct gpio_button buttons[2]; - }; - - #endif /* ! BOARD_BCM963XX_H_ */ diff --git a/target/linux/brcm63xx/patches-2.6.35/110-gpiodev.patch b/target/linux/brcm63xx/patches-2.6.35/110-gpiodev.patch deleted file mode 100644 index fc99f53..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/110-gpiodev.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -852,6 +852,10 @@ static struct platform_device mtd_dev = - .num_resources = ARRAY_SIZE(mtd_resources), - }; - -+static struct resource gpiodev_resource = { -+ .start = 0xFFFFFFFF, -+}; -+ - static struct gpio_led_platform_data bcm63xx_led_data; - - static struct platform_device bcm63xx_gpio_leds = { -@@ -916,6 +920,8 @@ int __init board_register_devices(void) - - platform_device_register(&mtd_dev); - -+ platform_device_register_simple("GPIODEV", 0, &gpiodev_resource, 1); -+ - bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds); - bcm63xx_led_data.leds = board.leds; - diff --git a/target/linux/brcm63xx/patches-2.6.35/120-spi-bitbang-norxtx-support.patch b/target/linux/brcm63xx/patches-2.6.35/120-spi-bitbang-norxtx-support.patch deleted file mode 100644 index 762bc66..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/120-spi-bitbang-norxtx-support.patch +++ /dev/null @@ -1,237 +0,0 @@ -From 04bb2a031cf95b34b7432dd47b318a932a895b4c Mon Sep 17 00:00:00 2001 -From: Marek Szyprowski <m.szyprowski@samsung.com> -Date: Wed, 30 Jun 2010 14:27:32 -0600 -Subject: [PATCH] spi/bitbang: add support for SPI_MASTER_NO_{TX, RX} modes - -This patch adds a new flags argument to bitbang_txrx_be_cpha0 and -bitbang_txrx_be_cpha1 transfer functions. This enables support for -SPI_MASTER_NO_{TX,RX} transfer modes. The change should have no impact -on speed of the existing drivers. bitbank_txrx_* functions are usually -inlined into the drivers. When the argument is equal to constant zero, -the optimizer would be able to eliminate the dead code (flags checks) -easily. Tested on ARM and GCC 4.4.x and in all cases the checks were -eliminated in the inlined function. - -Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> -Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> -Acked-by: David Brownell <dbrownell@users.sourceforge.net> -Signed-off-by: Grant Likely <grant.likely@secretlab.ca> ---- - drivers/spi/spi_bitbang_txrx.h | 16 ++++++++++------ - drivers/spi/spi_butterfly.c | 2 +- - drivers/spi/spi_gpio.c | 8 ++++---- - drivers/spi/spi_lm70llp.c | 2 +- - drivers/spi/spi_s3c24xx_gpio.c | 8 ++++---- - drivers/spi/spi_sh_sci.c | 8 ++++---- - 6 files changed, 24 insertions(+), 20 deletions(-) - ---- a/drivers/spi/spi_bitbang_txrx.h -+++ b/drivers/spi/spi_bitbang_txrx.h -@@ -44,7 +44,7 @@ - - static inline u32 - bitbang_txrx_be_cpha0(struct spi_device *spi, -- unsigned nsecs, unsigned cpol, -+ unsigned nsecs, unsigned cpol, unsigned flags, - u32 word, u8 bits) - { - /* if (cpol == 0) this is SPI_MODE_0; else this is SPI_MODE_2 */ -@@ -53,7 +53,8 @@ bitbang_txrx_be_cpha0(struct spi_device - for (word <<= (32 - bits); likely(bits); bits--) { - - /* setup MSB (to slave) on trailing edge */ -- setmosi(spi, word & (1 << 31)); -+ if ((flags & SPI_MASTER_NO_TX) == 0) -+ setmosi(spi, word & (1 << 31)); - spidelay(nsecs); /* T(setup) */ - - setsck(spi, !cpol); -@@ -61,7 +62,8 @@ bitbang_txrx_be_cpha0(struct spi_device - - /* sample MSB (from slave) on leading edge */ - word <<= 1; -- word |= getmiso(spi); -+ if ((flags & SPI_MASTER_NO_RX) == 0) -+ word |= getmiso(spi); - setsck(spi, cpol); - } - return word; -@@ -69,7 +71,7 @@ bitbang_txrx_be_cpha0(struct spi_device - - static inline u32 - bitbang_txrx_be_cpha1(struct spi_device *spi, -- unsigned nsecs, unsigned cpol, -+ unsigned nsecs, unsigned cpol, unsigned flags, - u32 word, u8 bits) - { - /* if (cpol == 0) this is SPI_MODE_1; else this is SPI_MODE_3 */ -@@ -79,7 +81,8 @@ bitbang_txrx_be_cpha1(struct spi_device - - /* setup MSB (to slave) on leading edge */ - setsck(spi, !cpol); -- setmosi(spi, word & (1 << 31)); -+ if ((flags & SPI_MASTER_NO_TX) == 0) -+ setmosi(spi, word & (1 << 31)); - spidelay(nsecs); /* T(setup) */ - - setsck(spi, cpol); -@@ -87,7 +90,8 @@ bitbang_txrx_be_cpha1(struct spi_device - - /* sample MSB (from slave) on trailing edge */ - word <<= 1; -- word |= getmiso(spi); -+ if ((flags & SPI_MASTER_NO_RX) == 0) -+ word |= getmiso(spi); - } - return word; - } ---- a/drivers/spi/spi_butterfly.c -+++ b/drivers/spi/spi_butterfly.c -@@ -156,7 +156,7 @@ butterfly_txrx_word_mode0(struct spi_dev - unsigned nsecs, - u32 word, u8 bits) - { -- return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits); -+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits); - } - - /*----------------------------------------------------------------------*/ ---- a/drivers/spi/spi_gpio.c -+++ b/drivers/spi/spi_gpio.c -@@ -157,25 +157,25 @@ static inline void spidelay(unsigned nse - static u32 spi_gpio_txrx_word_mode0(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) - { -- return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits); -+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits); - } - - static u32 spi_gpio_txrx_word_mode1(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) - { -- return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits); -+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits); - } - - static u32 spi_gpio_txrx_word_mode2(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) - { -- return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits); -+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits); - } - - static u32 spi_gpio_txrx_word_mode3(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) - { -- return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits); -+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits); - } - - /*----------------------------------------------------------------------*/ ---- a/drivers/spi/spi_lm70llp.c -+++ b/drivers/spi/spi_lm70llp.c -@@ -191,7 +191,7 @@ static void lm70_chipselect(struct spi_d - */ - static u32 lm70_txrx(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits) - { -- return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits); -+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits); - } - - static void spi_lm70llp_attach(struct parport *p) ---- a/drivers/spi/spi_s3c24xx_gpio.c -+++ b/drivers/spi/spi_s3c24xx_gpio.c -@@ -64,25 +64,25 @@ static inline u32 getmiso(struct spi_dev - static u32 s3c2410_spigpio_txrx_mode0(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) - { -- return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits); -+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits); - } - - static u32 s3c2410_spigpio_txrx_mode1(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) - { -- return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits); -+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits); - } - - static u32 s3c2410_spigpio_txrx_mode2(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) - { -- return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits); -+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits); - } - - static u32 s3c2410_spigpio_txrx_mode3(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) - { -- return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits); -+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits); - } - - ---- a/drivers/spi/spi_sh_sci.c -+++ b/drivers/spi/spi_sh_sci.c -@@ -83,25 +83,25 @@ static inline u32 getmiso(struct spi_dev - static u32 sh_sci_spi_txrx_mode0(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) - { -- return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits); -+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits); - } - - static u32 sh_sci_spi_txrx_mode1(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) - { -- return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits); -+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits); - } - - static u32 sh_sci_spi_txrx_mode2(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) - { -- return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits); -+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits); - } - - static u32 sh_sci_spi_txrx_mode3(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) - { -- return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits); -+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits); - } - - static void sh_sci_spi_chipselect(struct spi_device *dev, int value) ---- a/drivers/spi/spi_gpio_old.c -+++ b/drivers/spi/spi_gpio_old.c -@@ -80,25 +80,25 @@ static inline void do_spidelay(struct sp - static u32 spi_gpio_txrx_mode0(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) - { -- return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits); -+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits); - } - - static u32 spi_gpio_txrx_mode1(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) - { -- return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits); -+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits); - } - - static u32 spi_gpio_txrx_mode2(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) - { -- return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits); -+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits); - } - - static u32 spi_gpio_txrx_mode3(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) - { -- return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits); -+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits); - } - - static void spi_gpio_chipselect(struct spi_device *dev, int on) diff --git a/target/linux/brcm63xx/patches-2.6.35/121-spi-gpio-norxtx-support.patch b/target/linux/brcm63xx/patches-2.6.35/121-spi-gpio-norxtx-support.patch deleted file mode 100644 index 7ecf39f..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/121-spi-gpio-norxtx-support.patch +++ /dev/null @@ -1,217 +0,0 @@ -From 3c8e1a84fd6b984a7bce8816db2e3defc57bbfe4 Mon Sep 17 00:00:00 2001 -From: Marek Szyprowski <m.szyprowski@samsung.com> -Date: Wed, 30 Jun 2010 14:27:37 -0600 -Subject: [PATCH] spi/spi-gpio: add support for controllers without MISO or MOSI pin - -There are some boards that do not strictly follow SPI standard and use -only 3 wires (SCLK, MOSI or MISO, SS) for connecting some simple auxiliary -chips and controls them with GPIO based 'spi controller'. In this -configuration the MISO or MOSI line is missing (it is not required if the -chip does not transfer any data back to host or host only reads data from -chip). - -This patch adds support for such non-standard configuration in GPIO-based -SPI controller. It has been tested in configuration without MISO pin. - -Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> -Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> -Acked-by: David Brownell <dbrownell@users.sourceforge.net> -Signed-off-by: Grant Likely <grant.likely@secretlab.ca> ---- - drivers/spi/spi_gpio.c | 101 ++++++++++++++++++++++++++++++++++------- - include/linux/spi/spi_gpio.h | 5 ++ - 2 files changed, 88 insertions(+), 18 deletions(-) - ---- a/drivers/spi/spi_gpio.c -+++ b/drivers/spi/spi_gpio.c -@@ -178,6 +178,44 @@ static u32 spi_gpio_txrx_word_mode3(stru - return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits); - } - -+/* -+ * These functions do not call setmosi or getmiso if respective flag -+ * (SPI_MASTER_NO_RX or SPI_MASTER_NO_TX) is set, so they are safe to -+ * call when such pin is not present or defined in the controller. -+ * A separate set of callbacks is defined to get highest possible -+ * speed in the generic case (when both MISO and MOSI lines are -+ * available), as optimiser will remove the checks when argument is -+ * constant. -+ */ -+ -+static u32 spi_gpio_spec_txrx_word_mode0(struct spi_device *spi, -+ unsigned nsecs, u32 word, u8 bits) -+{ -+ unsigned flags = spi->master->flags; -+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, flags, word, bits); -+} -+ -+static u32 spi_gpio_spec_txrx_word_mode1(struct spi_device *spi, -+ unsigned nsecs, u32 word, u8 bits) -+{ -+ unsigned flags = spi->master->flags; -+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, flags, word, bits); -+} -+ -+static u32 spi_gpio_spec_txrx_word_mode2(struct spi_device *spi, -+ unsigned nsecs, u32 word, u8 bits) -+{ -+ unsigned flags = spi->master->flags; -+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, flags, word, bits); -+} -+ -+static u32 spi_gpio_spec_txrx_word_mode3(struct spi_device *spi, -+ unsigned nsecs, u32 word, u8 bits) -+{ -+ unsigned flags = spi->master->flags; -+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, flags, word, bits); -+} -+ - /*----------------------------------------------------------------------*/ - - static void spi_gpio_chipselect(struct spi_device *spi, int is_active) -@@ -243,19 +281,30 @@ static int __devinit spi_gpio_alloc(unsi - } - - static int __devinit --spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label) -+spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label, -+ u16 *res_flags) - { - int value; - - /* NOTE: SPI_*_GPIO symbols may reference "pdata" */ - -- value = spi_gpio_alloc(SPI_MOSI_GPIO, label, false); -- if (value) -- goto done; -- -- value = spi_gpio_alloc(SPI_MISO_GPIO, label, true); -- if (value) -- goto free_mosi; -+ if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI) { -+ value = spi_gpio_alloc(SPI_MOSI_GPIO, label, false); -+ if (value) -+ goto done; -+ } else { -+ /* HW configuration without MOSI pin */ -+ *res_flags |= SPI_MASTER_NO_TX; -+ } -+ -+ if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO) { -+ value = spi_gpio_alloc(SPI_MISO_GPIO, label, true); -+ if (value) -+ goto free_mosi; -+ } else { -+ /* HW configuration without MISO pin */ -+ *res_flags |= SPI_MASTER_NO_RX; -+ } - - value = spi_gpio_alloc(SPI_SCK_GPIO, label, false); - if (value) -@@ -264,9 +313,11 @@ spi_gpio_request(struct spi_gpio_platfor - goto done; - - free_miso: -- gpio_free(SPI_MISO_GPIO); -+ if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO) -+ gpio_free(SPI_MISO_GPIO); - free_mosi: -- gpio_free(SPI_MOSI_GPIO); -+ if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI) -+ gpio_free(SPI_MOSI_GPIO); - done: - return value; - } -@@ -277,6 +328,7 @@ static int __devinit spi_gpio_probe(stru - struct spi_master *master; - struct spi_gpio *spi_gpio; - struct spi_gpio_platform_data *pdata; -+ u16 master_flags = 0; - - pdata = pdev->dev.platform_data; - #ifdef GENERIC_BITBANG -@@ -284,7 +336,7 @@ static int __devinit spi_gpio_probe(stru - return -ENODEV; - #endif - -- status = spi_gpio_request(pdata, dev_name(&pdev->dev)); -+ status = spi_gpio_request(pdata, dev_name(&pdev->dev), &master_flags); - if (status < 0) - return status; - -@@ -300,6 +352,7 @@ static int __devinit spi_gpio_probe(stru - if (pdata) - spi_gpio->pdata = *pdata; - -+ master->flags = master_flags; - master->bus_num = pdev->id; - master->num_chipselect = SPI_N_CHIPSEL; - master->setup = spi_gpio_setup; -@@ -307,10 +360,18 @@ static int __devinit spi_gpio_probe(stru - - spi_gpio->bitbang.master = spi_master_get(master); - spi_gpio->bitbang.chipselect = spi_gpio_chipselect; -- spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0; -- spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1; -- spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2; -- spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_word_mode3; -+ -+ if ((master_flags & (SPI_MASTER_NO_RX | SPI_MASTER_NO_RX)) == 0) { -+ spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0; -+ spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1; -+ spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2; -+ spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_word_mode3; -+ } else { -+ spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_spec_txrx_word_mode0; -+ spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_spec_txrx_word_mode1; -+ spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_spec_txrx_word_mode2; -+ spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_spec_txrx_word_mode3; -+ } - spi_gpio->bitbang.setup_transfer = spi_bitbang_setup_transfer; - spi_gpio->bitbang.flags = SPI_CS_HIGH; - -@@ -318,8 +379,10 @@ static int __devinit spi_gpio_probe(stru - if (status < 0) { - spi_master_put(spi_gpio->bitbang.master); - gpio_free: -- gpio_free(SPI_MISO_GPIO); -- gpio_free(SPI_MOSI_GPIO); -+ if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO) -+ gpio_free(SPI_MISO_GPIO); -+ if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI) -+ gpio_free(SPI_MOSI_GPIO); - gpio_free(SPI_SCK_GPIO); - spi_master_put(master); - } -@@ -342,8 +405,10 @@ static int __devexit spi_gpio_remove(str - - platform_set_drvdata(pdev, NULL); - -- gpio_free(SPI_MISO_GPIO); -- gpio_free(SPI_MOSI_GPIO); -+ if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO) -+ gpio_free(SPI_MISO_GPIO); -+ if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI) -+ gpio_free(SPI_MOSI_GPIO); - gpio_free(SPI_SCK_GPIO); - - return status; ---- a/include/linux/spi/spi_gpio.h -+++ b/include/linux/spi/spi_gpio.h -@@ -29,11 +29,16 @@ - * SPI_GPIO_NO_CHIPSELECT to the controller_data: - * .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT; - * -+ * If the MISO or MOSI pin is not available then it should be set to -+ * SPI_GPIO_NO_MISO or SPI_GPIO_NO_MOSI. -+ * - * If the bitbanged bus is later switched to a "native" controller, - * that platform_device and controller_data should be removed. - */ - - #define SPI_GPIO_NO_CHIPSELECT ((unsigned long)-1l) -+#define SPI_GPIO_NO_MISO ((unsigned long)-1l) -+#define SPI_GPIO_NO_MOSI ((unsigned long)-1l) - - /** - * struct spi_gpio_platform_data - parameter for bitbanged SPI master diff --git a/target/linux/brcm63xx/patches-2.6.35/141-led_count.patch b/target/linux/brcm63xx/patches-2.6.35/141-led_count.patch deleted file mode 100644 index baf0920..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/141-led_count.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -881,6 +881,7 @@ int __init board_register_devices(void) - { - u32 val; - int button_count = 0; -+ int led_count = 0; - - if (board.has_uart0) - bcm63xx_uart_register(0); -@@ -922,7 +923,11 @@ int __init board_register_devices(void) - - platform_device_register_simple("GPIODEV", 0, &gpiodev_resource, 1); - -- bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds); -+ /* count number of LEDs defined by this device */ -+ while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name) -+ led_count++; -+ -+ bcm63xx_led_data.num_leds = led_count; - bcm63xx_led_data.leds = board.leds; - - platform_device_register(&bcm63xx_gpio_leds); diff --git a/target/linux/brcm63xx/patches-2.6.35/150-alice_gate2_leds.patch b/target/linux/brcm63xx/patches-2.6.35/150-alice_gate2_leds.patch deleted file mode 100644 index fa5ca81..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/150-alice_gate2_leds.patch +++ /dev/null @@ -1,113 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -588,6 +588,99 @@ static struct board_info __initdata boar - - .has_ohci0 = 1, - .has_ehci0 = 1, -+ -+ .leds = { -+ /*Each led on alice gate is bi-color */ -+ { -+ .name = "power:red", -+ .gpio = 5, -+ .active_low = 1, -+ }, -+ { -+ .name = "power:green", -+ .gpio = 4, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ { -+ .name = "service:red", -+ .gpio = 7, -+ .active_low = 1, -+ }, -+ { -+ .name = "service:green", -+ .gpio = 6, -+ .active_low = 1, -+ }, -+ { -+ .name = "adsl:red", -+ .gpio = 9, -+ .active_low = 1, -+ }, -+ { -+ .name = "adsl:green", -+ .gpio = 10, -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi:red", -+ .gpio = 23, -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi:green", -+ .gpio = 22, -+ .active_low = 1, -+ }, -+ { -+ .name = "internet:red", -+ .gpio = 25, -+ .active_low = 1, -+ }, -+ { -+ .name = "internet:green", -+ .gpio = 24, -+ .active_low = 1, -+ }, -+ { -+ .name = "usr1:red", -+ .gpio = 27, -+ .active_low = 1, -+ }, -+ { -+ .name = "usr1:green", -+ .gpio = 26, -+ .active_low = 1, -+ }, -+ { -+ .name = "usr2:red", -+ .gpio = 30, -+ .active_low = 1, -+ }, -+ { -+ .name = "usr2:green", -+ .gpio = 29, -+ .active_low = 1, -+ }, -+ }, -+ -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 37, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ { -+ .desc = "wps", -+ .gpio = 34, -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ }, -+ }, - }; - - static struct board_info __initdata board_DWVS0 = { ---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -@@ -56,7 +56,7 @@ struct board_info { - struct bcm63xx_dsp_platform_data dsp; - - /* GPIO LEDs */ -- struct gpio_led leds[5]; -+ struct gpio_led leds[14]; - - /* Buttons */ - struct gpio_button buttons[2]; diff --git a/target/linux/brcm63xx/patches-2.6.35/170-board_livebox.patch b/target/linux/brcm63xx/patches-2.6.35/170-board_livebox.patch deleted file mode 100644 index 6c39045..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/170-board_livebox.patch +++ /dev/null @@ -1,251 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/Kconfig -+++ b/arch/mips/bcm63xx/boards/Kconfig -@@ -8,4 +8,10 @@ config BOARD_BCM963XX - select SSB - help - -+config BOARD_LIVEBOX -+ bool "Inventel Livebox(es) boards" -+ select SSB -+ help -+ Inventel Livebox boards using the RedBoot bootloader. -+ - endchoice ---- a/arch/mips/bcm63xx/boards/Makefile -+++ b/arch/mips/bcm63xx/boards/Makefile -@@ -1,3 +1,4 @@ - obj-$(CONFIG_BOARD_BCM963XX) += board_bcm963xx.o -+obj-$(CONFIG_BOARD_LIVEBOX) += board_livebox.o - - EXTRA_CFLAGS += -Werror ---- /dev/null -+++ b/arch/mips/bcm63xx/boards/board_livebox.c -@@ -0,0 +1,228 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org> -+ */ -+ -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/string.h> -+#include <linux/platform_device.h> -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/partitions.h> -+#include <linux/mtd/physmap.h> -+#include <linux/input.h> -+#include <linux/gpio_buttons.h> -+#include <asm/addrspace.h> -+#include <bcm63xx_board.h> -+#include <bcm63xx_cpu.h> -+#include <bcm63xx_regs.h> -+#include <bcm63xx_io.h> -+#include <bcm63xx_dev_uart.h> -+#include <bcm63xx_dev_pci.h> -+#include <bcm63xx_dev_enet.h> -+#include <bcm63xx_dev_pcmcia.h> -+#include <bcm63xx_dev_usb_ohci.h> -+#include <bcm63xx_dev_usb_ehci.h> -+#include <board_bcm963xx.h> -+ -+#define PFX "board_livebox: " -+ -+static unsigned int mac_addr_used = 0; -+static struct board_info board; -+ -+/* -+ * known 6348 boards -+ */ -+#ifdef CONFIG_BCM63XX_CPU_6348 -+static struct board_info __initdata board_livebox = { -+ .name = "Livebox", -+ .expected_cpu_id = 0x6348, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+}; -+#endif -+ -+/* -+ * all boards -+ */ -+static const struct board_info __initdata *bcm963xx_boards[] = { -+#ifdef CONFIG_BCM63XX_CPU_6348 -+ &board_livebox -+#endif -+}; -+ -+/* -+ * early init callback -+ */ -+void __init board_prom_init(void) -+{ -+ u32 val; -+ -+ /* read base address of boot chip select (0) */ -+ val = bcm_mpi_readl(MPI_CSBASE_REG(0)); -+ val &= MPI_CSBASE_BASE_MASK; -+ -+ /* assume board is a Livebox */ -+ memcpy(&board, bcm963xx_boards[0], sizeof(board)); -+ -+ /* setup pin multiplexing depending on board enabled device, -+ * this has to be done this early since PCI init is done -+ * inside arch_initcall */ -+ val = 0; -+ -+ if (board.has_pci) { -+ bcm63xx_pci_enabled = 1; -+ if (BCMCPU_IS_6348()) -+ val |= GPIO_MODE_6348_G2_PCI; -+ } -+ -+ if (board.has_pccard) { -+ if (BCMCPU_IS_6348()) -+ val |= GPIO_MODE_6348_G1_MII_PCCARD; -+ } -+ -+ if (board.has_enet0 && !board.enet0.use_internal_phy) { -+ if (BCMCPU_IS_6348()) -+ val |= GPIO_MODE_6348_G3_EXT_MII | -+ GPIO_MODE_6348_G0_EXT_MII; -+ } -+ -+ if (board.has_enet1 && !board.enet1.use_internal_phy) { -+ if (BCMCPU_IS_6348()) -+ val |= GPIO_MODE_6348_G3_EXT_MII | -+ GPIO_MODE_6348_G0_EXT_MII; -+ } -+ -+ bcm_gpio_writel(val, GPIO_MODE_REG); -+} -+ -+/* -+ * second stage init callback, good time to panic if we couldn't -+ * identify on which board we're running since early printk is working -+ */ -+void __init board_setup(void) -+{ -+ if (!board.name[0]) -+ panic("unable to detect bcm963xx board"); -+ printk(KERN_INFO PFX "board name: %s\n", board.name); -+ -+ /* make sure we're running on expected cpu */ -+ if (bcm63xx_get_cpu_id() != board.expected_cpu_id) -+ panic("unexpected CPU for bcm963xx board"); -+} -+ -+/* -+ * return board name for /proc/cpuinfo -+ */ -+const char *board_get_name(void) -+{ -+ return board.name; -+} -+ -+/* -+ * register & return a new board mac address -+ */ -+ -+static int board_get_mac_address(u8 *mac) -+{ -+ u8 default_mac[ETH_ALEN] = {0x00, 0x07, 0x3A, 0x00, 0x00, 0x00}; -+ u8 *p; -+ int count; -+ -+ memcpy(mac, default_mac, ETH_ALEN); -+ -+ p = mac + ETH_ALEN - 1; -+ count = mac_addr_used; -+ -+ while (count--) { -+ do { -+ (*p)++; -+ if (*p != 0) -+ break; -+ p--; -+ } while (p != mac); -+ } -+ -+ if (p == mac) { -+ printk(KERN_ERR PFX "unable to fetch mac address\n"); -+ return -ENODEV; -+ } -+ mac_addr_used++; -+ -+ return 0; -+} -+ -+static struct resource mtd_resources[] = { -+ { -+ .start = 0, /* filled at runtime */ -+ .end = 0, /* filled at runtime */ -+ .flags = IORESOURCE_MEM, -+ } -+}; -+ -+static struct platform_device mtd_dev = { -+ .name = "bcm963xx-flash", -+ .resource = mtd_resources, -+ .num_resources = ARRAY_SIZE(mtd_resources), -+}; -+ -+ -+/* -+ * third stage init callback, register all board devices. -+ */ -+int __init board_register_devices(void) -+{ -+ u32 val; -+ -+ if (board.has_uart0) -+ bcm63xx_uart_register(0); -+ -+ if (board.has_pccard) -+ bcm63xx_pcmcia_register(); -+ -+ if (board.has_enet0 && -+ !board_get_mac_address(board.enet0.mac_addr)) -+ bcm63xx_enet_register(0, &board.enet0); -+ -+ if (board.has_enet1 && -+ !board_get_mac_address(board.enet1.mac_addr)) -+ bcm63xx_enet_register(1, &board.enet1); -+ -+ if (board.has_ohci0) -+ bcm63xx_ohci_register(); -+ -+ if (board.has_ehci0) -+ bcm63xx_ehci_register(); -+ -+ -+ /* read base address of boot chip select (0) */ -+ val = bcm_mpi_readl(MPI_CSBASE_REG(0)); -+ val &= MPI_CSBASE_BASE_MASK; -+ mtd_resources[0].start = val; -+ mtd_resources[0].end = 0x1FFFFFFF; -+ -+ platform_device_register(&mtd_dev); -+ -+ return 0; -+} -+ diff --git a/target/linux/brcm63xx/patches-2.6.35/180-udc_preliminary_support.patch b/target/linux/brcm63xx/patches-2.6.35/180-udc_preliminary_support.patch deleted file mode 100644 index 6011db7..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/180-udc_preliminary_support.patch +++ /dev/null @@ -1,243 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -29,6 +29,7 @@ - #include <bcm63xx_dev_pcmcia.h> - #include <bcm63xx_dev_usb_ohci.h> - #include <bcm63xx_dev_usb_ehci.h> -+#include <bcm63xx_dev_usb_udc.h> - #include <board_bcm963xx.h> - - #define PFX "board_bcm963xx: " -@@ -400,6 +401,8 @@ static struct board_info __initdata boar - .has_ohci0 = 1, - .has_pccard = 1, - .has_ehci0 = 1, -+ -+ .has_udc0 = 1, - }; - - static struct board_info __initdata board_rta1025w_16 = { -@@ -1002,6 +1005,9 @@ int __init board_register_devices(void) - if (board.has_dsp) - bcm63xx_dsp_register(&board.dsp); - -+ if (board.has_udc0) -+ bcm63xx_udc_register(); -+ - /* read base address of boot chip select (0) */ - if (BCMCPU_IS_6345()) - val = 0x1fc00000; ---- /dev/null -+++ b/arch/mips/bcm63xx/dev-usb-udc.c -@@ -0,0 +1,58 @@ -+/* -+ * Copyright (C) 2009 Henk Vergonet <Henk.Vergonet@gmail.com> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. -+ */ -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/platform_device.h> -+#include <bcm63xx_cpu.h> -+ -+static struct resource udc_resources[] = { -+ { -+ .start = -1, /* filled at runtime */ -+ .end = -1, /* filled at runtime */ -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .start = -1, /* filled at runtime */ -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static u64 udc_dmamask = ~(u32)0; -+ -+static struct platform_device bcm63xx_udc_device = { -+ .name = "bcm63xx-udc", -+ .id = 0, -+ .num_resources = ARRAY_SIZE(udc_resources), -+ .resource = udc_resources, -+ .dev = { -+ .dma_mask = &udc_dmamask, -+ .coherent_dma_mask = 0xffffffff, -+ }, -+}; -+ -+int __init bcm63xx_udc_register(void) -+{ -+ if (!BCMCPU_IS_6338() && !BCMCPU_IS_6345() && !BCMCPU_IS_6348()) -+ return 0; -+ -+ udc_resources[0].start = bcm63xx_regset_address(RSET_UDC0); -+ udc_resources[0].end = udc_resources[0].start; -+ udc_resources[0].end += RSET_UDC_SIZE - 1; -+ udc_resources[1].start = bcm63xx_get_irq_number(IRQ_UDC0); -+ return platform_device_register(&bcm63xx_udc_device); -+} ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -@@ -127,7 +127,7 @@ enum bcm63xx_regs_set { - #define BCM_6338_UART1_BASE (0xdeadbeef) - #define BCM_6338_GPIO_BASE (0xfffe0400) - #define BCM_6338_SPI_BASE (0xfffe0c00) --#define BCM_6338_UDC0_BASE (0xdeadbeef) -+#define BCM_6338_UDC0_BASE (0xfffe3000) - #define BCM_6338_USBDMA_BASE (0xfffe2400) - #define BCM_6338_OHCI0_BASE (0xdeadbeef) - #define BCM_6338_OHCI_PRIV_BASE (0xfffe3000) -@@ -158,7 +158,7 @@ enum bcm63xx_regs_set { - #define BCM_6345_UART1_BASE (0xdeadbeef) - #define BCM_6345_GPIO_BASE (0xfffe0400) - #define BCM_6345_SPI_BASE (0xdeadbeef) --#define BCM_6345_UDC0_BASE (0xdeadbeef) -+#define BCM_6345_UDC0_BASE (0xfffe2100) - #define BCM_6345_USBDMA_BASE (0xfffe2800) - #define BCM_6345_ENET0_BASE (0xfffe1800) - #define BCM_6345_ENETDMA_BASE (0xfffe2800) -@@ -215,7 +215,7 @@ enum bcm63xx_regs_set { - #define BCM_6358_UART1_BASE (0xfffe0120) - #define BCM_6358_GPIO_BASE (0xfffe0080) - #define BCM_6358_SPI_BASE (0xdeadbeef) --#define BCM_6358_UDC0_BASE (0xfffe0800) -+#define BCM_6358_UDC0_BASE (0xfffe0400) - #define BCM_6358_OHCI0_BASE (0xfffe1400) - #define BCM_6358_OHCI_PRIV_BASE (0xdeadbeef) - #define BCM_6358_USBH_PRIV_BASE (0xfffe1500) -@@ -444,6 +444,7 @@ enum bcm63xx_irq { - IRQ_UART0, - IRQ_UART1, - IRQ_DSL, -+ IRQ_UDC0, - IRQ_ENET0, - IRQ_ENET1, - IRQ_ENET_PHY, -@@ -486,7 +487,7 @@ enum bcm63xx_irq { - #define BCM_6345_UART0_IRQ (IRQ_INTERNAL_BASE + 2) - #define BCM_6345_DSL_IRQ (IRQ_INTERNAL_BASE + 3) - #define BCM_6345_ATM_IRQ (IRQ_INTERNAL_BASE + 4) --#define BCM_6345_USB_IRQ (IRQ_INTERNAL_BASE + 5) -+#define BCM_6345_UDC0_IRQ (IRQ_INTERNAL_BASE + 5) - #define BCM_6345_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) - #define BCM_6345_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12) - #define BCM_6345_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 13 + 1) -@@ -508,10 +509,17 @@ enum bcm63xx_irq { - #define BCM_6348_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) - #define BCM_6348_UART0_IRQ (IRQ_INTERNAL_BASE + 2) - #define BCM_6348_DSL_IRQ (IRQ_INTERNAL_BASE + 4) -+#define BCM_6348_UDC0_IRQ (IRQ_INTERNAL_BASE + 6) - #define BCM_6348_ENET1_IRQ (IRQ_INTERNAL_BASE + 7) - #define BCM_6348_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) - #define BCM_6348_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9) - #define BCM_6348_OHCI0_IRQ (IRQ_INTERNAL_BASE + 12) -+#define BCM_6348_USB_CNTL_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 14) -+#define BCM_6348_USB_CNTL_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 15) -+#define BCM_6348_USB_BULK_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 16) -+#define BCM_6348_USB_BULK_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 17) -+#define BCM_6348_USB_ISO_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 18) -+#define BCM_6348_USB_ISO_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 19) - #define BCM_6348_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 20) - #define BCM_6348_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 21) - #define BCM_6348_ENET1_RXDMA_IRQ (IRQ_INTERNAL_BASE + 22) ---- /dev/null -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_udc.h -@@ -0,0 +1,6 @@ -+#ifndef BCM63XX_DEV_USB_UDC_H_ -+#define BCM63XX_DEV_USB_UDC_H_ -+ -+int bcm63xx_udc_register(void); -+ -+#endif /* BCM63XX_DEV_USB_UDC_H_ */ ---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -@@ -47,6 +47,7 @@ struct board_info { - unsigned int has_dsp:1; - unsigned int has_uart0:1; - unsigned int has_uart1:1; -+ unsigned int has_udc0:1; - - /* ethernet config */ - struct bcm63xx_enet_platform_data enet0; ---- a/arch/mips/bcm63xx/Makefile -+++ b/arch/mips/bcm63xx/Makefile -@@ -1,6 +1,6 @@ - obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \ - dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \ -- dev-usb-ohci.o dev-usb-ehci.o -+ dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - - obj-y += boards/ ---- a/arch/mips/bcm63xx/clk.c -+++ b/arch/mips/bcm63xx/clk.c -@@ -141,6 +141,30 @@ static struct clk clk_usbh = { - }; - - /* -+ * USB slave clock -+ */ -+static void usbs_set(struct clk *clk, int enable) -+{ -+ u32 mask; -+ -+ switch(bcm63xx_get_cpu_id()) { -+ case BCM6338_CPU_ID: -+ mask = CKCTL_6338_USBS_EN; -+ break; -+ case BCM6348_CPU_ID: -+ mask = CKCTL_6348_USBS_EN; -+ break; -+ default: -+ return; -+ } -+ bcm_hwclock_set(mask, enable); -+} -+ -+static struct clk clk_usbs = { -+ .set = usbs_set, -+}; -+ -+/* - * SPI clock - */ - static void spi_set(struct clk *clk, int enable) -@@ -208,6 +232,8 @@ struct clk *clk_get(struct device *dev, - return &clk_ephy; - if (!strcmp(id, "usbh")) - return &clk_usbh; -+ if (!strcmp(id, "usbs")) -+ return &clk_usbs; - if (!strcmp(id, "spi")) - return &clk_spi; - if (!strcmp(id, "periph")) ---- a/arch/mips/bcm63xx/Kconfig -+++ b/arch/mips/bcm63xx/Kconfig -@@ -7,6 +7,7 @@ config BCM63XX_CPU_6338 - select USB_ARCH_HAS_OHCI - select USB_OHCI_BIG_ENDIAN_DESC - select USB_OHCI_BIG_ENDIAN_MMIO -+ select USB_ARCH_HAS_UDC - - config BCM63XX_CPU_6345 - bool "support 6345 CPU" -@@ -19,6 +20,7 @@ config BCM63XX_CPU_6348 - select USB_ARCH_HAS_OHCI - select USB_OHCI_BIG_ENDIAN_DESC - select USB_OHCI_BIG_ENDIAN_MMIO -+ select USB_ARCH_HAS_UDC - - config BCM63XX_CPU_6358 - bool "support 6358 CPU" diff --git a/target/linux/brcm63xx/patches-2.6.35/200-extended-platform-devices.patch b/target/linux/brcm63xx/patches-2.6.35/200-extended-platform-devices.patch deleted file mode 100644 index e9619d4..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/200-extended-platform-devices.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1008,6 +1008,9 @@ int __init board_register_devices(void) - if (board.has_udc0) - bcm63xx_udc_register(); - -+ if (board.num_devs) -+ platform_add_devices(board.devs, board.num_devs); -+ - /* read base address of boot chip select (0) */ - if (BCMCPU_IS_6345()) - val = 0x1fc00000; ---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -@@ -61,6 +61,10 @@ struct board_info { - - /* Buttons */ - struct gpio_button buttons[2]; -+ -+ /* Additional platform devices */ -+ struct platform_device **devs; -+ unsigned int num_devs; - }; - - #endif /* ! BOARD_BCM963XX_H_ */ diff --git a/target/linux/brcm63xx/patches-2.6.35/200-spi-board-info.patch b/target/linux/brcm63xx/patches-2.6.35/200-spi-board-info.patch deleted file mode 100644 index fc39eb4..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/200-spi-board-info.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1011,6 +1011,9 @@ int __init board_register_devices(void) - if (board.num_devs) - platform_add_devices(board.devs, board.num_devs); - -+ if (board.num_spis) -+ spi_register_board_info(board.spis, board.num_spis); -+ - /* read base address of boot chip select (0) */ - if (BCMCPU_IS_6345()) - val = 0x1fc00000; ---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -@@ -65,6 +65,10 @@ struct board_info { - /* Additional platform devices */ - struct platform_device **devs; - unsigned int num_devs; -+ -+ /* Additional platform devices */ -+ struct spi_board_info *spis; -+ unsigned int num_spis; - }; - - #endif /* ! BOARD_BCM963XX_H_ */ diff --git a/target/linux/brcm63xx/patches-2.6.35/211-gen-74x164-gpio-chip-driver.patch b/target/linux/brcm63xx/patches-2.6.35/211-gen-74x164-gpio-chip-driver.patch deleted file mode 100644 index fdb8981..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/211-gen-74x164-gpio-chip-driver.patch +++ /dev/null @@ -1,458 +0,0 @@ ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -321,6 +321,14 @@ config GPIO_MC33880 - SPI driver for Freescale MC33880 high-side/low-side switch. - This provides GPIO interface supporting inputs and outputs. - -+config GPIO_74X164 -+ tristate "74x164 serial-in/parallel-out 8-bits shift register" -+ depends on SPI_MASTER -+ help -+ Platform driver for 74x164 compatible serial-in/parallel-out -+ 8-outputs shift registers. This driver can be used to provide access -+ to more gpio outputs. -+ - comment "AC97 GPIO expanders:" - - config GPIO_UCB1400 ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -17,6 +17,7 @@ obj-$(CONFIG_GPIO_MAX7301) += max7301.o - obj-$(CONFIG_GPIO_MAX732X) += max732x.o - obj-$(CONFIG_GPIO_MC33880) += mc33880.o - obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o -+obj-$(CONFIG_GPIO_74X164) += 74x164.o - obj-$(CONFIG_GPIO_PCA953X) += pca953x.o - obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o - obj-$(CONFIG_GPIO_PL061) += pl061.o ---- /dev/null -+++ b/drivers/gpio/nxp_74hc164.c -@@ -0,0 +1,227 @@ -+/* -+ * NXP 74HC164 - output expander GPIO driver -+ * -+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> -+ * Copyright (C) 2010 Miguel Gaio <miguel.gaio@efixo.com> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * Copy from nxp_74hc153.c code -+ */ -+ -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/gpio.h> -+#include <linux/bitops.h> -+#include <linux/slab.h> -+#include <linux/platform_device.h> -+#include <linux/nxp_74hc164.h> -+ -+#define NXP_74HC164_NUM_GPIOS 8 -+ -+struct nxp_74hc164_chip { -+ struct device *parent; -+ struct gpio_chip gpio_chip; -+ struct mutex lock; -+ long mask; -+}; -+ -+static void nxp_74hc164_set_value(struct gpio_chip *, unsigned, int); -+ -+static struct nxp_74hc164_chip *gpio_to_nxp(struct gpio_chip *gc) -+{ -+ return container_of(gc, struct nxp_74hc164_chip, gpio_chip); -+} -+ -+static int nxp_74hc164_direction_input(struct gpio_chip *gc, unsigned offset) -+{ -+ WARN_ON(1); -+ return -EINVAL; -+} -+ -+static int nxp_74hc164_direction_output(struct gpio_chip *gc, -+ unsigned offset, int val) -+{ -+ nxp_74hc164_set_value(gc, offset, val); -+ return 0; -+} -+ -+static int nxp_74hc164_get_value(struct gpio_chip *gc, unsigned offset) -+{ -+ struct nxp_74hc164_chip *nxp = gpio_to_nxp(gc); -+ int ret; -+ -+ mutex_lock(&nxp->lock); -+ ret = test_bit(offset, &nxp->mask); -+ mutex_unlock(&nxp->lock); -+ -+ return ret; -+} -+ -+static void nxp_74hc164_set_value(struct gpio_chip *gc, -+ unsigned offset, int val) -+{ -+ struct nxp_74hc164_chip *nxp; -+ struct nxp_74hc164_platform_data *pdata; -+ long mask; -+ int refresh; -+ int i; -+ -+ nxp = gpio_to_nxp(gc); -+ pdata = nxp->parent->platform_data; -+ -+ mutex_lock(&nxp->lock); -+ if (val) -+ refresh = (test_and_set_bit(offset, &nxp->mask) != val); -+ else -+ refresh = (test_and_clear_bit(offset, &nxp->mask) != val); -+ -+ if (refresh) { -+ mask = nxp->mask; -+ for (i = 8; i > 0; --i, mask <<= 1) { -+ gpio_set_value(pdata->gpio_pin_data, mask & 0x80); -+ gpio_set_value(pdata->gpio_pin_clk, 1); -+ gpio_set_value(pdata->gpio_pin_clk, 0); -+ } -+ } -+ mutex_unlock(&nxp->lock); -+} -+ -+static int __devinit nxp_74hc164_probe(struct platform_device *pdev) -+{ -+ struct nxp_74hc164_platform_data *pdata; -+ struct nxp_74hc164_chip *nxp; -+ struct gpio_chip *gc; -+ int err; -+ -+ pdata = pdev->dev.platform_data; -+ if (pdata == NULL) { -+ dev_dbg(&pdev->dev, "no platform data specified\n"); -+ return -EINVAL; -+ } -+ -+ nxp = kzalloc(sizeof(struct nxp_74hc164_chip), GFP_KERNEL); -+ if (nxp == NULL) { -+ dev_err(&pdev->dev, "no memory for private data\n"); -+ return -ENOMEM; -+ } -+ -+ err = gpio_request(pdata->gpio_pin_clk, dev_name(&pdev->dev)); -+ if (err) { -+ dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n", -+ pdata->gpio_pin_clk, err); -+ goto err_free_nxp; -+ } -+ -+ err = gpio_request(pdata->gpio_pin_data, dev_name(&pdev->dev)); -+ if (err) { -+ dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n", -+ pdata->gpio_pin_data, err); -+ goto err_free_clk; -+ } -+ -+ err = gpio_direction_output(pdata->gpio_pin_clk, 0); -+ if (err) { -+ dev_err(&pdev->dev, -+ "unable to set direction of gpio %u, err=%d\n", -+ pdata->gpio_pin_clk, err); -+ goto err_free_data; -+ } -+ -+ err = gpio_direction_output(pdata->gpio_pin_data, 0); -+ if (err) { -+ dev_err(&pdev->dev, -+ "unable to set direction of gpio %u, err=%d\n", -+ pdata->gpio_pin_data, err); -+ goto err_free_data; -+ } -+ -+ nxp->parent = &pdev->dev; -+ mutex_init(&nxp->lock); -+ -+ gc = &nxp->gpio_chip; -+ -+ gc->direction_input = nxp_74hc164_direction_input; -+ gc->direction_output = nxp_74hc164_direction_output; -+ gc->get = nxp_74hc164_get_value; -+ gc->set = nxp_74hc164_set_value; -+ gc->can_sleep = 1; -+ -+ gc->base = pdata->gpio_base; -+ gc->ngpio = NXP_74HC164_NUM_GPIOS; -+ gc->label = dev_name(nxp->parent); -+ gc->dev = nxp->parent; -+ gc->owner = THIS_MODULE; -+ -+ err = gpiochip_add(&nxp->gpio_chip); -+ if (err) { -+ dev_err(&pdev->dev, "unable to add gpio chip, err=%d\n", err); -+ goto err_free_data; -+ } -+ -+ platform_set_drvdata(pdev, nxp); -+ return 0; -+ -+ err_free_data: -+ gpio_free(pdata->gpio_pin_data); -+ err_free_clk: -+ gpio_free(pdata->gpio_pin_clk); -+ err_free_nxp: -+ kfree(nxp); -+ return err; -+} -+ -+static int nxp_74hc164_remove(struct platform_device *pdev) -+{ -+ struct nxp_74hc164_chip *nxp = platform_get_drvdata(pdev); -+ struct nxp_74hc164_platform_data *pdata = pdev->dev.platform_data; -+ -+ if (nxp) { -+ int err; -+ -+ err = gpiochip_remove(&nxp->gpio_chip); -+ if (err) { -+ dev_err(&pdev->dev, -+ "unable to remove gpio chip, err=%d\n", -+ err); -+ return err; -+ } -+ -+ gpio_free(pdata->gpio_pin_clk); -+ gpio_free(pdata->gpio_pin_data); -+ -+ kfree(nxp); -+ platform_set_drvdata(pdev, NULL); -+ } -+ -+ return 0; -+} -+ -+static struct platform_driver nxp_74hc164_driver = { -+ .probe = nxp_74hc164_probe, -+ .remove = __devexit_p(nxp_74hc164_remove), -+ .driver = { -+ .name = NXP_74HC164_DRIVER_NAME, -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init nxp_74hc164_init(void) -+{ -+ return platform_driver_register(&nxp_74hc164_driver); -+} -+subsys_initcall(nxp_74hc164_init); -+ -+static void __exit nxp_74hc164_exit(void) -+{ -+ platform_driver_unregister(&nxp_74hc164_driver); -+} -+module_exit(nxp_74hc164_exit); -+ -+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); -+MODULE_AUTHOR("Miguel Gaio <miguel.gaio@efixo.com>"); -+MODULE_DESCRIPTION("GPIO expander driver for NXP 74HC164"); -+MODULE_LICENSE("GPL v2"); -+MODULE_ALIAS("platform:" NXP_74HC164_DRIVER_NAME); ---- /dev/null -+++ b/drivers/gpio/74x164.c -@@ -0,0 +1,184 @@ -+/* -+ * 74Hx164 - Generic serial-in/parallel-out 8-bits shift register GPIO driver -+ * -+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> -+ * Copyright (C) 2010 Miguel Gaio <miguel.gaio@efixo.com> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include <linux/init.h> -+#include <linux/mutex.h> -+#include <linux/spi/spi.h> -+#include <linux/spi/74x164.h> -+#include <linux/gpio.h> -+#include <linux/slab.h> -+ -+#define GEN_74X164_GPIO_COUNT 8 -+ -+ -+struct gen_74x164_chip { -+ struct spi_device *spi; -+ struct gpio_chip gpio_chip; -+ struct mutex lock; -+ u8 port_config; -+}; -+ -+static void gen_74x164_set_value(struct gpio_chip *, unsigned, int); -+ -+static struct gen_74x164_chip *gpio_to_chip(struct gpio_chip *gc) -+{ -+ return container_of(gc, struct gen_74x164_chip, gpio_chip); -+} -+ -+static int __gen_74x164_write_config(struct gen_74x164_chip *chip) -+{ -+ return spi_write(chip->spi, -+ &chip->port_config, sizeof(chip->port_config)); -+} -+ -+static int gen_74x164_direction_output(struct gpio_chip *gc, -+ unsigned offset, int val) -+{ -+ gen_74x164_set_value(gc, offset, val); -+ return 0; -+} -+ -+static int gen_74x164_get_value(struct gpio_chip *gc, unsigned offset) -+{ -+ struct gen_74x164_chip *chip = gpio_to_chip(gc); -+ int ret; -+ -+ mutex_lock(&chip->lock); -+ ret = (chip->port_config >> offset) & 0x1; -+ mutex_unlock(&chip->lock); -+ -+ return ret; -+} -+ -+static void gen_74x164_set_value(struct gpio_chip *gc, -+ unsigned offset, int val) -+{ -+ struct gen_74x164_chip *chip = gpio_to_chip(gc); -+ bool refresh; -+ -+ mutex_lock(&chip->lock); -+ if (val) -+ chip->port_config |= (1 << offset); -+ else -+ chip->port_config &= ~(1 << offset); -+ -+ __gen_74x164_write_config(chip); -+ mutex_unlock(&chip->lock); -+} -+ -+static int __devinit gen_74x164_probe(struct spi_device *spi) -+{ -+ struct gen_74x164_chip *chip; -+ struct gen_74x164_chip_platform_data *pdata; -+ int ret; -+ -+ pdata = spi->dev.platform_data; -+ if (!pdata || !pdata->base) { -+ dev_dbg(&spi->dev, "incorrect or missing platform data\n"); -+ return -EINVAL; -+ } -+ -+ /* -+ * bits_per_word cannot be configured in platform data -+ */ -+ spi->bits_per_word = 8; -+ -+ ret = spi_setup(spi); -+ if (ret < 0) -+ return ret; -+ -+ chip = kzalloc(sizeof(*chip), GFP_KERNEL); -+ if (!chip) -+ return -ENOMEM; -+ -+ mutex_init(&chip->lock); -+ -+ dev_set_drvdata(&spi->dev, chip); -+ -+ chip->spi = spi; -+ -+ chip->gpio_chip.label = GEN_74X164_DRIVER_NAME, -+ chip->gpio_chip.direction_output = gen_74x164_direction_output; -+ chip->gpio_chip.get = gen_74x164_get_value; -+ chip->gpio_chip.set = gen_74x164_set_value; -+ chip->gpio_chip.base = pdata->base; -+ chip->gpio_chip.ngpio = GEN_74X164_GPIO_COUNT; -+ chip->gpio_chip.can_sleep = 1; -+ chip->gpio_chip.dev = &spi->dev; -+ chip->gpio_chip.owner = THIS_MODULE; -+ -+ ret = __gen_74x164_write_config(chip); -+ if (ret) { -+ dev_err(&spi->dev, "Failed writing: %d\n", ret); -+ goto exit_destroy; -+ } -+ -+ ret = gpiochip_add(&chip->gpio_chip); -+ if (ret) -+ goto exit_destroy; -+ -+ return ret; -+ -+exit_destroy: -+ dev_set_drvdata(&spi->dev, NULL); -+ mutex_destroy(&chip->lock); -+ kfree(chip); -+ return ret; -+} -+ -+static int gen_74x164_remove(struct spi_device *spi) -+{ -+ struct gen_74x164_chip *chip; -+ int ret; -+ -+ chip = dev_get_drvdata(&spi->dev); -+ if (chip == NULL) -+ return -ENODEV; -+ -+ dev_set_drvdata(&spi->dev, NULL); -+ -+ ret = gpiochip_remove(&chip->gpio_chip); -+ if (!ret) { -+ mutex_destroy(&chip->lock); -+ kfree(chip); -+ } else -+ dev_err(&spi->dev, "Failed to remove the GPIO controller: %d\n", -+ ret); -+ -+ return ret; -+} -+ -+static struct spi_driver gen_74x164_driver = { -+ .driver = { -+ .name = GEN_74X164_DRIVER_NAME, -+ .owner = THIS_MODULE, -+ }, -+ .probe = gen_74x164_probe, -+ .remove = __devexit_p(gen_74x164_remove), -+}; -+ -+static int __init gen_74x164_init(void) -+{ -+ return spi_register_driver(&gen_74x164_driver); -+} -+subsys_initcall(gen_74x164_init); -+ -+static void __exit gen_74x164_exit(void) -+{ -+ spi_unregister_driver(&gen_74x164_driver); -+} -+module_exit(gen_74x164_exit); -+ -+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); -+MODULE_AUTHOR("Miguel Gaio <miguel.gaio@efixo.com>"); -+MODULE_DESCRIPTION("GPIO expander driver for 74X164 8-bits shift register"); -+MODULE_LICENSE("GPL v2"); -+ ---- /dev/null -+++ b/include/linux/spi/74x164.h -@@ -0,0 +1,11 @@ -+#ifndef LINUX_SPI_74X164_H -+#define LINUX_SPI_74X164_H -+ -+#define GEN_74X164_DRIVER_NAME "74x164" -+ -+struct gen_74x164_chip_platform_data { -+ /* number assigned to the first GPIO */ -+ unsigned base; -+}; -+ -+#endif diff --git a/target/linux/brcm63xx/patches-2.6.35/220-board-D4PW.patch b/target/linux/brcm63xx/patches-2.6.35/220-board-D4PW.patch deleted file mode 100644 index 1e630d1..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/220-board-D4PW.patch +++ /dev/null @@ -1,60 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -464,6 +464,49 @@ static struct board_info __initdata boar - - .has_ohci0 = 1, - }; -+ -+static struct board_info __initdata board_96348_D4PW = { -+ .name = "D-4P-W", -+ .expected_cpu_id = 0x6348, -+ -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .leds = { -+ { -+ .name = "ppp", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ { -+ .name = "ppp-fail", -+ .gpio = 5, -+ .active_low = 1, -+ }, -+ { -+ .name = "power", -+ .gpio = 0, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ -+ }, -+ }, -+ -+}; -+ - #endif - - /* -@@ -728,6 +771,7 @@ static const struct board_info __initdat - &board_DV201AMR, - &board_96348gw_a, - &board_rta1025w_16, -+ &board_96348_D4PW, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 diff --git a/target/linux/brcm63xx/patches-2.6.35/221-board-NB4.patch b/target/linux/brcm63xx/patches-2.6.35/221-board-NB4.patch deleted file mode 100644 index c2d1056..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/221-board-NB4.patch +++ /dev/null @@ -1,569 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -17,6 +17,9 @@ - #include <linux/ssb/ssb.h> - #include <linux/gpio_buttons.h> - #include <linux/input.h> -+#include <linux/spi/spi.h> -+#include <linux/spi/spi_gpio.h> -+#include <linux/spi/74x164.h> - #include <asm/addrspace.h> - #include <bcm63xx_board.h> - #include <bcm63xx_cpu.h> -@@ -34,6 +37,12 @@ - - #define PFX "board_bcm963xx: " - -+#define NB4_PID_OFFSET 0xff80 -+#define NB4_74X164_GPIO_BASE 64 -+#define NB4_SPI_GPIO_MOSI 7 -+#define NB4_SPI_GPIO_CLK 6 -+#define NB4_74HC64_GPIO(X) (NB4_74X164_GPIO_BASE + (X)) -+ - static struct bcm963xx_nvram nvram; - static unsigned int mac_addr_used; - static struct board_info board; -@@ -749,6 +758,502 @@ static struct board_info __initdata boar - - .has_ohci0 = 1, - }; -+ -+struct spi_gpio_platform_data nb4_spi_gpio_data = { -+ .sck = NB4_SPI_GPIO_CLK, -+ .mosi = NB4_SPI_GPIO_MOSI, -+ .miso = SPI_GPIO_NO_MISO, -+ .num_chipselect = 1, -+}; -+ -+ -+static struct platform_device nb4_spi_gpio = { -+ .name = "spi_gpio", -+ .id = 1, -+ .dev = { -+ .platform_data = &nb4_spi_gpio_data, -+ }, -+}; -+ -+static struct platform_device * __initdata nb4_devices[] = { -+ &nb4_spi_gpio, -+}; -+ -+const struct gen_74x164_chip_platform_data nb4_74x164_platform_data = { -+ .base = NB4_74X164_GPIO_BASE -+}; -+ -+static struct spi_board_info nb4_spi_devices[] = { -+ { -+ .modalias = "74x164", -+ .max_speed_hz = 781000, -+ .bus_num = 1, -+ .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT, -+ .mode = SPI_MODE_0, -+ .platform_data = &nb4_74x164_platform_data -+ } -+}; -+ -+static struct board_info __initdata board_nb4_ser_r0 = { -+ .name = "NB4-SER-r0", -+ .expected_cpu_id = 0x6358, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+ -+ .has_udc0 = 1, -+ -+ .leds = { -+ { -+ .name = "adsl", -+ .gpio = NB4_74HC64_GPIO(4), -+ .active_low = 1, -+ }, -+ { -+ .name = "traffic", -+ .gpio = 2, -+ .active_low = 1, -+ }, -+ { -+ .name = "tel", -+ .gpio = NB4_74HC64_GPIO(3), -+ .active_low = 1, -+ }, -+ { -+ .name = "tv", -+ .gpio = NB4_74HC64_GPIO(2), -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi", -+ .gpio = 15, -+ .active_low = 1, -+ }, -+ { -+ .name = "alarm", -+ .gpio = NB4_74HC64_GPIO(0), -+ .active_low = 1, -+ }, -+ { -+ .name = "service:red", -+ .gpio = 29, -+ .active_low = 1, -+ }, -+ { -+ .name = "service:green", -+ .gpio = 30, -+ .active_low = 1, -+ }, -+ { -+ .name = "service:blue", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 34, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ { -+ .desc = "wps", -+ .gpio = 37, -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ }, -+ }, -+ .devs = nb4_devices, -+ .num_devs = ARRAY_SIZE(nb4_devices), -+ .spis = nb4_spi_devices, -+ .num_spis = ARRAY_SIZE(nb4_spi_devices), -+}; -+ -+static struct board_info __initdata board_nb4_ser_r1 = { -+ .name = "NB4-SER-r1", -+ .expected_cpu_id = 0x6358, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+ -+ .has_udc0 = 1, -+ -+ .leds = { -+ { -+ .name = "adsl", -+ .gpio = NB4_74HC64_GPIO(4), -+ .active_low = 1, -+ }, -+ { -+ .name = "traffic", -+ .gpio = 2, -+ .active_low = 1, -+ }, -+ { -+ .name = "tel", -+ .gpio = NB4_74HC64_GPIO(3), -+ .active_low = 1, -+ }, -+ { -+ .name = "tv", -+ .gpio = NB4_74HC64_GPIO(2), -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi", -+ .gpio = 15, -+ .active_low = 1, -+ }, -+ { -+ .name = "alarm", -+ .gpio = NB4_74HC64_GPIO(0), -+ .active_low = 1, -+ }, -+ { -+ .name = "service:red", -+ .gpio = 29, -+ .active_low = 1, -+ }, -+ { -+ .name = "service:green", -+ .gpio = 30, -+ .active_low = 1, -+ }, -+ { -+ .name = "service:blue", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 34, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ { -+ .desc = "wps", -+ .gpio = 37, -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ }, -+ }, -+ .devs = nb4_devices, -+ .num_devs = ARRAY_SIZE(nb4_devices), -+ .spis = nb4_spi_devices, -+ .num_spis = ARRAY_SIZE(nb4_spi_devices), -+}; -+ -+static struct board_info __initdata board_nb4_ser_r2 = { -+ .name = "NB4-SER-r2", -+ .expected_cpu_id = 0x6358, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+ -+ .leds = { -+ { -+ .name = "adsl", -+ .gpio = NB4_74HC64_GPIO(4), -+ .active_low = 1, -+ }, -+ { -+ .name = "traffic", -+ .gpio = 2, -+ .active_low = 1, -+ }, -+ { -+ .name = "tel", -+ .gpio = NB4_74HC64_GPIO(3), -+ .active_low = 1, -+ }, -+ { -+ .name = "tv", -+ .gpio = NB4_74HC64_GPIO(2), -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi", -+ .gpio = 15, -+ .active_low = 1, -+ }, -+ { -+ .name = "alarm", -+ .gpio = NB4_74HC64_GPIO(0), -+ .active_low = 1, -+ }, -+ { -+ .name = "service:red", -+ .gpio = 29, -+ .active_low = 1, -+ }, -+ { -+ .name = "service:green", -+ .gpio = 30, -+ .active_low = 1, -+ }, -+ { -+ .name = "service:blue", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 34, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ { -+ .desc = "wps", -+ .gpio = 37, -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ }, -+ }, -+ .devs = nb4_devices, -+ .num_devs = ARRAY_SIZE(nb4_devices), -+ .spis = nb4_spi_devices, -+ .num_spis = ARRAY_SIZE(nb4_spi_devices), -+}; -+ -+static struct board_info __initdata board_nb4_fxc_r1 = { -+ .name = "NB4-FXC-r1", -+ .expected_cpu_id = 0x6358, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+ -+ .has_udc0 = 1, -+ -+ .leds = { -+ { -+ .name = "adsl", -+ .gpio = NB4_74HC64_GPIO(4), -+ .active_low = 1, -+ }, -+ { -+ .name = "traffic", -+ .gpio = 2, -+ }, -+ { -+ .name = "tel", -+ .gpio = NB4_74HC64_GPIO(3), -+ .active_low = 1, -+ }, -+ { -+ .name = "tv", -+ .gpio = NB4_74HC64_GPIO(2), -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi", -+ .gpio = 15, -+ }, -+ { -+ .name = "alarm", -+ .gpio = NB4_74HC64_GPIO(0), -+ .active_low = 1, -+ }, -+ { -+ .name = "service:red", -+ .gpio = 29, -+ }, -+ { -+ .name = "service:green", -+ .gpio = 30, -+ }, -+ { -+ .name = "service:blue", -+ .gpio = 4, -+ }, -+ }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 34, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ { -+ .desc = "wps", -+ .gpio = 37, -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ }, -+ }, -+ .devs = nb4_devices, -+ .num_devs = ARRAY_SIZE(nb4_devices), -+ .spis = nb4_spi_devices, -+ .num_spis = ARRAY_SIZE(nb4_spi_devices), -+}; -+ -+static struct board_info __initdata board_nb4_fxc_r2 = { -+ .name = "NB4-FXC-r2", -+ .expected_cpu_id = 0x6358, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+ -+ .leds = { -+ { -+ .name = "adsl", -+ .gpio = NB4_74HC64_GPIO(4), -+ .active_low = 1, -+ }, -+ { -+ .name = "traffic", -+ .gpio = 2, -+ }, -+ { -+ .name = "tel", -+ .gpio = NB4_74HC64_GPIO(3), -+ .active_low = 1, -+ }, -+ { -+ .name = "tv", -+ .gpio = NB4_74HC64_GPIO(2), -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi", -+ .gpio = 15, -+ }, -+ { -+ .name = "alarm", -+ .gpio = NB4_74HC64_GPIO(0), -+ .active_low = 1, -+ }, -+ { -+ .name = "service:red", -+ .gpio = 29, -+ }, -+ { -+ .name = "service:green", -+ .gpio = 30, -+ }, -+ { -+ .name = "service:blue", -+ .gpio = 4, -+ }, -+ }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 34, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ { -+ .desc = "wps", -+ .gpio = 37, -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ }, -+ }, -+ .devs = nb4_devices, -+ .num_devs = ARRAY_SIZE(nb4_devices), -+ .spis = nb4_spi_devices, -+ .num_spis = ARRAY_SIZE(nb4_spi_devices), -+}; - #endif - - /* -@@ -779,9 +1284,30 @@ static const struct board_info __initdat - &board_96358vw2, - &board_AGPFS0, - &board_DWVS0, -+ &board_nb4_ser_r0, -+ &board_nb4_ser_r1, -+ &board_nb4_ser_r2, -+ &board_nb4_fxc_r1, -+ &board_nb4_fxc_r2, - #endif - }; - -+static void __init nb4_nvram_fixup(void) -+{ -+ u8 *boot_addr, *p; -+ u32 val; -+ -+ if (BCMCPU_IS_6358() && (!strcmp(nvram.name, "96358VW"))) { -+ val = bcm_mpi_readl(MPI_CSBASE_REG(0)); -+ val &= MPI_CSBASE_BASE_MASK; -+ boot_addr = (u8 *)KSEG1ADDR(val); -+ /* Extract nb4 PID */ -+ p = boot_addr + NB4_PID_OFFSET; -+ if (!memcmp(p, "NB4-", 4)) -+ memcpy(nvram.name, p, sizeof("NB4-XXX-rX")); -+ } -+} -+ - /* - * Register a sane SPROMv2 to make the on-board - * bcm4318 WLAN work -@@ -899,6 +1425,9 @@ void __init board_prom_init(void) - return; - } - -+ /* Fixup broken nb4 board name */ -+ nb4_nvram_fixup(); -+ - /* find board by name */ - for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) { - if (strncmp(nvram.name, bcm963xx_boards[i]->name, diff --git a/target/linux/brcm63xx/patches-2.6.35/240-spi.patch b/target/linux/brcm63xx/patches-2.6.35/240-spi.patch deleted file mode 100644 index 32c2d05..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/240-spi.patch +++ /dev/null @@ -1,1002 +0,0 @@ ---- a/arch/mips/bcm63xx/cpu.c -+++ b/arch/mips/bcm63xx/cpu.c -@@ -56,6 +56,7 @@ static const unsigned long bcm96338_regs - - static const int bcm96338_irqs[] = { - [IRQ_TIMER] = BCM_6338_TIMER_IRQ, -+ [IRQ_SPI] = BCM_6338_SPI_IRQ, - [IRQ_UART0] = BCM_6338_UART0_IRQ, - [IRQ_DSL] = BCM_6338_DSL_IRQ, - [IRQ_ENET0] = BCM_6338_ENET0_IRQ, -@@ -130,6 +131,7 @@ static const unsigned long bcm96348_regs - - static const int bcm96348_irqs[] = { - [IRQ_TIMER] = BCM_6348_TIMER_IRQ, -+ [IRQ_SPI] = BCM_6348_SPI_IRQ, - [IRQ_UART0] = BCM_6348_UART0_IRQ, - [IRQ_DSL] = BCM_6348_DSL_IRQ, - [IRQ_ENET0] = BCM_6348_ENET0_IRQ, -@@ -173,6 +175,7 @@ static const unsigned long bcm96358_regs - - static const int bcm96358_irqs[] = { - [IRQ_TIMER] = BCM_6358_TIMER_IRQ, -+ [IRQ_SPI] = BCM_6358_SPI_IRQ, - [IRQ_UART0] = BCM_6358_UART0_IRQ, - [IRQ_UART1] = BCM_6358_UART1_IRQ, - [IRQ_DSL] = BCM_6358_DSL_IRQ, ---- /dev/null -+++ b/arch/mips/bcm63xx/dev-spi.c -@@ -0,0 +1,128 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org> -+ * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com> -+ */ -+ -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/platform_device.h> -+ -+#include <bcm63xx_cpu.h> -+#include <bcm63xx_dev_spi.h> -+#include <bcm63xx_regs.h> -+ -+#ifdef BCMCPU_RUNTIME_DETECT -+/* -+ * register offsets -+ */ -+static const unsigned long bcm96338_regs_spi[] = { -+ [SPI_CMD] = SPI_BCM_6338_SPI_CMD, -+ [SPI_INT_STATUS] = SPI_BCM_6338_SPI_INT_STATUS, -+ [SPI_INT_MASK_ST] = SPI_BCM_6338_SPI_MASK_INT_ST, -+ [SPI_INT_MASK] = SPI_BCM_6338_SPI_INT_MASK, -+ [SPI_ST] = SPI_BCM_6338_SPI_ST, -+ [SPI_CLK_CFG] = SPI_BCM_6338_SPI_CLK_CFG, -+ [SPI_FILL_BYTE] = SPI_BCM_6338_SPI_FILL_BYTE, -+ [SPI_MSG_TAIL] = SPI_BCM_6338_SPI_MSG_TAIL, -+ [SPI_RX_TAIL] = SPI_BCM_6338_SPI_RX_TAIL, -+ [SPI_MSG_CTL] = SPI_BCM_6338_SPI_MSG_CTL, -+ [SPI_MSG_DATA] = SPI_BCM_6338_SPI_MSG_DATA, -+ [SPI_RX_DATA] = SPI_BCM_6338_SPI_RX_DATA, -+}; -+ -+static const unsigned long bcm96348_regs_spi[] = { -+ [SPI_CMD] = SPI_BCM_6348_SPI_CMD, -+ [SPI_INT_STATUS] = SPI_BCM_6348_SPI_INT_STATUS, -+ [SPI_INT_MASK_ST] = SPI_BCM_6348_SPI_MASK_INT_ST, -+ [SPI_INT_MASK] = SPI_BCM_6348_SPI_INT_MASK, -+ [SPI_ST] = SPI_BCM_6348_SPI_ST, -+ [SPI_CLK_CFG] = SPI_BCM_6348_SPI_CLK_CFG, -+ [SPI_FILL_BYTE] = SPI_BCM_6348_SPI_FILL_BYTE, -+ [SPI_MSG_TAIL] = SPI_BCM_6348_SPI_MSG_TAIL, -+ [SPI_RX_TAIL] = SPI_BCM_6348_SPI_RX_TAIL, -+ [SPI_MSG_CTL] = SPI_BCM_6348_SPI_MSG_CTL, -+ [SPI_MSG_DATA] = SPI_BCM_6348_SPI_MSG_DATA, -+ [SPI_RX_DATA] = SPI_BCM_6348_SPI_RX_DATA, -+}; -+ -+static const unsigned long bcm96358_regs_spi[] = { -+ [SPI_CMD] = SPI_BCM_6358_SPI_CMD, -+ [SPI_INT_STATUS] = SPI_BCM_6358_SPI_INT_STATUS, -+ [SPI_INT_MASK_ST] = SPI_BCM_6358_SPI_MASK_INT_ST, -+ [SPI_INT_MASK] = SPI_BCM_6358_SPI_INT_MASK, -+ [SPI_ST] = SPI_BCM_6358_SPI_STATUS, -+ [SPI_CLK_CFG] = SPI_BCM_6358_SPI_CLK_CFG, -+ [SPI_FILL_BYTE] = SPI_BCM_6358_SPI_FILL_BYTE, -+ [SPI_MSG_TAIL] = SPI_BCM_6358_SPI_MSG_TAIL, -+ [SPI_RX_TAIL] = SPI_BCM_6358_SPI_RX_TAIL, -+ [SPI_MSG_CTL] = SPI_BCM_6358_MSG_CTL, -+ [SPI_MSG_DATA] = SPI_BCM_6358_SPI_MSG_DATA, -+ [SPI_RX_DATA] = SPI_BCM_6358_SPI_RX_DATA, -+}; -+ -+const unsigned long *bcm63xx_regs_spi; -+EXPORT_SYMBOL(bcm63xx_regs_spi); -+ -+static __init void bcm63xx_spi_regs_init(void) -+{ -+ if (BCMCPU_IS_6338()) -+ bcm63xx_regs_spi = bcm96338_regs_spi; -+ if (BCMCPU_IS_6348()) -+ bcm63xx_regs_spi = bcm96348_regs_spi; -+ if (BCMCPU_IS_6358()) -+ bcm63xx_regs_spi = bcm96358_regs_spi; -+} -+#else -+static __init void bcm63xx_spi_regs_init(void) { } -+#endif -+ -+static struct resource spi_resources[] = { -+ { -+ .start = -1, /* filled at runtime */ -+ .end = -1, /* filled at runtime */ -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .start = -1, /* filled at runtime */ -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct bcm63xx_spi_pdata spi_pdata = { -+ .bus_num = 0, -+ .num_chipselect = 8, -+ .speed_hz = 50000000, /* Fclk */ -+}; -+ -+static struct platform_device bcm63xx_spi_device = { -+ .name = "bcm63xx-spi", -+ .id = 0, -+ .num_resources = ARRAY_SIZE(spi_resources), -+ .resource = spi_resources, -+ .dev = { -+ .platform_data = &spi_pdata, -+ }, -+}; -+ -+int __init bcm63xx_spi_register(void) -+{ -+ spi_resources[0].start = bcm63xx_regset_address(RSET_SPI); -+ spi_resources[0].end = spi_resources[0].start; -+ spi_resources[0].end += RSET_SPI_SIZE - 1; -+ spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI); -+ -+ /* Fill in platform data */ -+ if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) -+ spi_pdata.fifo_size = SPI_BCM_6338_SPI_MSG_DATA_SIZE; -+ -+ if (BCMCPU_IS_6358()) -+ spi_pdata.fifo_size = SPI_BCM_6358_SPI_MSG_DATA_SIZE; -+ -+ bcm63xx_spi_regs_init(); -+ -+ return platform_device_register(&bcm63xx_spi_device); -+} ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -@@ -109,6 +109,7 @@ enum bcm63xx_regs_set { - #define RSET_WDT_SIZE 12 - #define RSET_ENET_SIZE 2048 - #define RSET_ENETDMA_SIZE 2048 -+#define RSET_SPI_SIZE 256 - #define RSET_UART_SIZE 24 - #define RSET_UDC_SIZE 256 - #define RSET_OHCI_SIZE 256 -@@ -214,7 +215,7 @@ enum bcm63xx_regs_set { - #define BCM_6358_UART0_BASE (0xfffe0100) - #define BCM_6358_UART1_BASE (0xfffe0120) - #define BCM_6358_GPIO_BASE (0xfffe0080) --#define BCM_6358_SPI_BASE (0xdeadbeef) -+#define BCM_6358_SPI_BASE (0xfffe0800) - #define BCM_6358_UDC0_BASE (0xfffe0400) - #define BCM_6358_OHCI0_BASE (0xfffe1400) - #define BCM_6358_OHCI_PRIV_BASE (0xdeadbeef) -@@ -441,6 +442,7 @@ static inline unsigned long bcm63xx_regs - */ - enum bcm63xx_irq { - IRQ_TIMER = 0, -+ IRQ_SPI, - IRQ_UART0, - IRQ_UART1, - IRQ_DSL, -@@ -507,6 +509,7 @@ enum bcm63xx_irq { - * 6348 irqs - */ - #define BCM_6348_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) -+#define BCM_6348_SPI_IRQ (IRQ_INTERNAL_BASE + 1) - #define BCM_6348_UART0_IRQ (IRQ_INTERNAL_BASE + 2) - #define BCM_6348_DSL_IRQ (IRQ_INTERNAL_BASE + 4) - #define BCM_6348_UDC0_IRQ (IRQ_INTERNAL_BASE + 6) -@@ -531,6 +534,7 @@ enum bcm63xx_irq { - * 6358 irqs - */ - #define BCM_6358_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) -+#define BCM_6358_SPI_IRQ (IRQ_INTERNAL_BASE + 1) - #define BCM_6358_UART0_IRQ (IRQ_INTERNAL_BASE + 2) - #define BCM_6358_UART1_IRQ (IRQ_INTERNAL_BASE + 3) - #define BCM_6358_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5) ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -@@ -769,4 +769,116 @@ - #define DMIPSPLLCFG_N2_SHIFT 29 - #define DMIPSPLLCFG_N2_MASK (0x7 << DMIPSPLLCFG_N2_SHIFT) - -+/************************************************************************* -+ * _REG relative to RSET_SPI -+ *************************************************************************/ -+ -+/* BCM 6338 SPI core */ -+#define SPI_BCM_6338_SPI_CMD 0x00 /* 16-bits register */ -+#define SPI_BCM_6338_SPI_INT_STATUS 0x02 -+#define SPI_BCM_6338_SPI_MASK_INT_ST 0x03 -+#define SPI_BCM_6338_SPI_INT_MASK 0x04 -+#define SPI_BCM_6338_SPI_ST 0x05 -+#define SPI_BCM_6338_SPI_CLK_CFG 0x06 -+#define SPI_BCM_6338_SPI_FILL_BYTE 0x07 -+#define SPI_BCM_6338_SPI_MSG_TAIL 0x09 -+#define SPI_BCM_6338_SPI_RX_TAIL 0x0b -+#define SPI_BCM_6338_SPI_MSG_CTL 0x40 -+#define SPI_BCM_6338_SPI_MSG_DATA 0x41 -+#define SPI_BCM_6338_SPI_MSG_DATA_SIZE 0x3f -+#define SPI_BCM_6338_SPI_RX_DATA 0x80 -+#define SPI_BCM_6338_SPI_RX_DATA_SIZE 0x3f -+ -+/* BCM 6348 SPI core */ -+#define SPI_BCM_6348_SPI_MASK_INT_ST 0x00 -+#define SPI_BCM_6348_SPI_INT_STATUS 0x01 -+#define SPI_BCM_6348_SPI_CMD 0x02 /* 16-bits register */ -+#define SPI_BCM_6348_SPI_FILL_BYTE 0x04 -+#define SPI_BCM_6348_SPI_CLK_CFG 0x05 -+#define SPI_BCM_6348_SPI_ST 0x06 -+#define SPI_BCM_6348_SPI_INT_MASK 0x07 -+#define SPI_BCM_6348_SPI_RX_TAIL 0x08 -+#define SPI_BCM_6348_SPI_MSG_TAIL 0x10 -+#define SPI_BCM_6348_SPI_MSG_DATA 0x40 -+#define SPI_BCM_6348_SPI_MSG_CTL 0x42 -+#define SPI_BCM_6348_SPI_MSG_DATA_SIZE 0x3f -+#define SPI_BCM_6348_SPI_RX_DATA 0x80 -+#define SPI_BCM_6348_SPI_RX_DATA_SIZE 0x3f -+ -+/* BCM 6358 SPI core */ -+#define SPI_BCM_6358_MSG_CTL 0x00 /* 16-bits register */ -+ -+#define SPI_BCM_6358_SPI_MSG_DATA 0x02 -+#define SPI_BCM_6358_SPI_MSG_DATA_SIZE 0x21e -+ -+#define SPI_BCM_6358_SPI_RX_DATA 0x400 -+#define SPI_BCM_6358_SPI_RX_DATA_SIZE 0x220 -+ -+#define SPI_BCM_6358_SPI_CMD 0x700 /* 16-bits register */ -+ -+#define SPI_BCM_6358_SPI_INT_STATUS 0x702 -+#define SPI_BCM_6358_SPI_MASK_INT_ST 0x703 -+ -+#define SPI_BCM_6358_SPI_INT_MASK 0x704 -+ -+#define SPI_BCM_6358_SPI_STATUS 0x705 -+ -+#define SPI_BCM_6358_SPI_CLK_CFG 0x706 -+ -+#define SPI_BCM_6358_SPI_FILL_BYTE 0x707 -+#define SPI_BCM_6358_SPI_MSG_TAIL 0x709 -+#define SPI_BCM_6358_SPI_RX_TAIL 0x70B -+ -+/* Shared SPI definitions */ -+ -+/* Message configuration */ -+#define SPI_FD_RW 0x00 -+#define SPI_HD_W 0x01 -+#define SPI_HD_R 0x02 -+#define SPI_BYTE_CNT_SHIFT 0 -+#define SPI_MSG_TYPE_SHIFT 14 -+ -+/* Command */ -+#define SPI_CMD_NOOP 0x01 -+#define SPI_CMD_SOFT_RESET 0x02 -+#define SPI_CMD_HARD_RESET 0x04 -+#define SPI_CMD_START_IMMEDIATE 0x08 -+#define SPI_CMD_COMMAND_SHIFT 0 -+#define SPI_CMD_COMMAND_MASK 0x000f -+#define SPI_CMD_DEVICE_ID_SHIFT 4 -+#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8 -+#define SPI_CMD_ONE_BYTE_SHIFT 11 -+#define SPI_CMD_ONE_WIRE_SHIFT 12 -+#define SPI_DEV_ID_0 0 -+#define SPI_DEV_ID_1 1 -+#define SPI_DEV_ID_2 2 -+#define SPI_DEV_ID_3 3 -+ -+/* Interrupt mask */ -+#define SPI_INTR_CMD_DONE 0x01 -+#define SPI_INTR_RX_OVERFLOW 0x02 -+#define SPI_INTR_TX_UNDERFLOW 0x04 -+#define SPI_INTR_TX_OVERFLOW 0x08 -+#define SPI_INTR_RX_UNDERFLOW 0x10 -+#define SPI_INTR_CLEAR_ALL 0x1f -+ -+/* Status */ -+#define SPI_RX_EMPTY 0x02 -+#define SPI_CMD_BUSY 0x04 -+#define SPI_SERIAL_BUSY 0x08 -+ -+/* Clock configuration */ -+#define SPI_CLK_20MHZ 0x00 -+#define SPI_CLK_0_391MHZ 0x01 -+#define SPI_CLK_0_781MHZ 0x02 /* default */ -+#define SPI_CLK_1_563MHZ 0x03 -+#define SPI_CLK_3_125MHZ 0x04 -+#define SPI_CLK_6_250MHZ 0x05 -+#define SPI_CLK_12_50MHZ 0x06 -+#define SPI_CLK_25MHZ 0x07 -+#define SPI_CLK_MASK 0x07 -+#define SPI_SSOFFTIME_MASK 0x38 -+#define SPI_SSOFFTIME_SHIFT 3 -+#define SPI_BYTE_SWAP 0x80 -+ - #endif /* BCM63XX_REGS_H_ */ ---- /dev/null -+++ b/drivers/spi/bcm63xx_spi.c -@@ -0,0 +1,496 @@ -+/* -+ * Broadcom BCM63xx SPI controller support -+ * -+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org> -+ * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2 -+ * of the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the -+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/clk.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/delay.h> -+#include <linux/interrupt.h> -+#include <linux/spi/spi.h> -+#include <linux/completion.h> -+#include <linux/err.h> -+ -+#include <bcm63xx_dev_spi.h> -+ -+#define PFX KBUILD_MODNAME -+#define DRV_VER "0.1.2" -+ -+struct bcm63xx_spi { -+ spinlock_t lock; -+ int stopping; -+ struct completion done; -+ -+ void __iomem *regs; -+ int irq; -+ -+ /* Platform data */ -+ u32 speed_hz; -+ unsigned fifo_size; -+ -+ /* Data buffers */ -+ const unsigned char *tx_ptr; -+ unsigned char *rx_ptr; -+ -+ /* data iomem */ -+ u8 __iomem *tx_io; -+ const u8 __iomem *rx_io; -+ -+ int remaining_bytes; -+ -+ struct clk *clk; -+ struct platform_device *pdev; -+}; -+ -+static inline u8 bcm_spi_readb(struct bcm63xx_spi *bs, -+ unsigned int offset) -+{ -+ return bcm_readw(bs->regs + bcm63xx_spireg(offset)); -+} -+ -+static inline u16 bcm_spi_readw(struct bcm63xx_spi *bs, -+ unsigned int offset) -+{ -+ return bcm_readw(bs->regs + bcm63xx_spireg(offset)); -+} -+ -+static inline void bcm_spi_writeb(struct bcm63xx_spi *bs, -+ u8 value, unsigned int offset) -+{ -+ bcm_writeb(value, bs->regs + bcm63xx_spireg(offset)); -+} -+ -+static inline void bcm_spi_writew(struct bcm63xx_spi *bs, -+ u16 value, unsigned int offset) -+{ -+ bcm_writew(value, bs->regs + bcm63xx_spireg(offset)); -+} -+ -+static int bcm63xx_spi_setup_transfer(struct spi_device *spi, -+ struct spi_transfer *t) -+{ -+ u8 bits_per_word; -+ u8 clk_cfg; -+ u32 hz; -+ unsigned int div; -+ -+ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); -+ -+ bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word; -+ hz = (t) ? t->speed_hz : spi->max_speed_hz; -+ if (bits_per_word != 8) { -+ dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n", -+ __func__, bits_per_word); -+ return -EINVAL; -+ } -+ -+ if (spi->chip_select > spi->master->num_chipselect) { -+ dev_err(&spi->dev, "%s, unsupported slave %d\n", -+ __func__, spi->chip_select); -+ return -EINVAL; -+ } -+ -+ /* Check clock setting */ -+ div = (bs->speed_hz / hz); -+ switch (div) { -+ case 2: -+ clk_cfg = SPI_CLK_25MHZ; -+ break; -+ case 4: -+ clk_cfg = SPI_CLK_12_50MHZ; -+ break; -+ case 8: -+ clk_cfg = SPI_CLK_6_250MHZ; -+ break; -+ case 16: -+ clk_cfg = SPI_CLK_3_125MHZ; -+ break; -+ case 32: -+ clk_cfg = SPI_CLK_1_563MHZ; -+ break; -+ case 64: -+ clk_cfg = SPI_CLK_0_781MHZ; -+ break; -+ case 128: -+ default: -+ /* Set to slowest mode for compatibility */ -+ clk_cfg = SPI_CLK_0_391MHZ; -+ break; -+ } -+ -+ bcm_spi_writeb(bs, clk_cfg, SPI_CLK_CFG); -+ dev_dbg(&spi->dev, "Setting clock register to %d (hz %d, cmd %02x)\n", -+ div, hz, clk_cfg); -+ -+ return 0; -+} -+ -+/* the spi->mode bits understood by this driver: */ -+#define MODEBITS (SPI_CPOL | SPI_CPHA) -+ -+static int bcm63xx_spi_setup(struct spi_device *spi) -+{ -+ struct bcm63xx_spi *bs; -+ int ret; -+ -+ bs = spi_master_get_devdata(spi->master); -+ -+ if (bs->stopping) -+ return -ESHUTDOWN; -+ -+ if (!spi->bits_per_word) -+ spi->bits_per_word = 8; -+ -+ if (spi->mode & ~MODEBITS) { -+ dev_err(&spi->dev, "%s, unsupported mode bits %x\n", -+ __func__, spi->mode & ~MODEBITS); -+ return -EINVAL; -+ } -+ -+ ret = bcm63xx_spi_setup_transfer(spi, NULL); -+ if (ret < 0) { -+ dev_err(&spi->dev, "setup: unsupported mode bits %x\n", -+ spi->mode & ~MODEBITS); -+ return ret; -+ } -+ -+ dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n", -+ __func__, spi->mode & MODEBITS, spi->bits_per_word, 0); -+ -+ return 0; -+} -+ -+/* Fill the TX FIFO with as many bytes as possible */ -+static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs) -+{ -+ u8 size; -+ -+ /* Fill the Tx FIFO with as many bytes as possible */ -+ size = bs->remaining_bytes < bs->fifo_size ? bs->remaining_bytes : -+ bs->fifo_size; -+ memcpy_toio(bs->tx_io, bs->tx_ptr, size); -+ bs->remaining_bytes -= size; -+} -+ -+static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) -+{ -+ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); -+ u16 msg_ctl; -+ u16 cmd; -+ -+ dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n", -+ t->tx_buf, t->rx_buf, t->len); -+ -+ /* Transmitter is inhibited */ -+ bs->tx_ptr = t->tx_buf; -+ bs->rx_ptr = t->rx_buf; -+ init_completion(&bs->done); -+ -+ if (t->tx_buf) { -+ bs->remaining_bytes = t->len; -+ bcm63xx_spi_fill_tx_fifo(bs); -+ } -+ -+ /* Enable the command done interrupt which -+ * we use to determine completion of a command */ -+ bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK); -+ -+ /* Fill in the Message control register */ -+ msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT); -+ -+ if (t->rx_buf && t->tx_buf) -+ msg_ctl |= (SPI_FD_RW << SPI_MSG_TYPE_SHIFT); -+ else if (t->rx_buf) -+ msg_ctl |= (SPI_HD_R << SPI_MSG_TYPE_SHIFT); -+ else if (t->tx_buf) -+ msg_ctl |= (SPI_HD_W << SPI_MSG_TYPE_SHIFT); -+ -+ bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL); -+ -+ /* Issue the transfer */ -+ cmd = SPI_CMD_START_IMMEDIATE; -+ cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT); -+ cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT); -+ bcm_spi_writew(bs, cmd, SPI_CMD); -+ wait_for_completion(&bs->done); -+ -+ /* Disable the CMD_DONE interrupt */ -+ bcm_spi_writeb(bs, 0, SPI_INT_MASK); -+ -+ return t->len - bs->remaining_bytes; -+} -+ -+static int bcm63xx_transfer(struct spi_device *spi, struct spi_message *m) -+{ -+ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); -+ struct spi_transfer *t; -+ int ret = 0; -+ -+ if (unlikely(list_empty(&m->transfers))) -+ return -EINVAL; -+ -+ if (bs->stopping) -+ return -ESHUTDOWN; -+ -+ list_for_each_entry(t, &m->transfers, transfer_list) { -+ ret += bcm63xx_txrx_bufs(spi, t); -+ } -+ -+ m->complete(m->context); -+ -+ return ret; -+} -+ -+/* This driver supports single master mode only. Hence -+ * CMD_DONE is the only interrupt we care about -+ */ -+static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id) -+{ -+ struct spi_master *master = (struct spi_master *)dev_id; -+ struct bcm63xx_spi *bs = spi_master_get_devdata(master); -+ u8 intr; -+ u16 cmd; -+ -+ /* Read interupts and clear them immediately */ -+ intr = bcm_spi_readb(bs, SPI_INT_STATUS); -+ bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); -+ bcm_spi_writeb(bs, 0, SPI_INT_MASK); -+ -+ /* A tansfer completed */ -+ if (intr & SPI_INTR_CMD_DONE) { -+ u8 rx_tail; -+ -+ rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL); -+ -+ /* Read out all the data */ -+ if (rx_tail) -+ memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail); -+ -+ /* See if there is more data to send */ -+ if (bs->remaining_bytes > 0) { -+ bcm63xx_spi_fill_tx_fifo(bs); -+ -+ /* Start the transfer */ -+ bcm_spi_writew(bs, SPI_HD_W << SPI_MSG_TYPE_SHIFT, -+ SPI_MSG_CTL); -+ cmd = bcm_spi_readw(bs, SPI_CMD); -+ cmd |= SPI_CMD_START_IMMEDIATE; -+ cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT); -+ bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK); -+ bcm_spi_writew(bs, cmd, SPI_CMD); -+ } else { -+ complete(&bs->done); -+ } -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+ -+static int __init bcm63xx_spi_probe(struct platform_device *pdev) -+{ -+ struct resource *r; -+ struct device *dev = &pdev->dev; -+ struct bcm63xx_spi_pdata *pdata = pdev->dev.platform_data; -+ int irq; -+ struct spi_master *master; -+ struct clk *clk; -+ struct bcm63xx_spi *bs; -+ int ret; -+ -+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!r) { -+ dev_err(dev, "no iomem\n"); -+ ret = -ENXIO; -+ goto out; -+ } -+ -+ irq = platform_get_irq(pdev, 0); -+ if (irq < 0) { -+ dev_err(dev, "no irq\n"); -+ ret = -ENXIO; -+ goto out; -+ } -+ -+ clk = clk_get(dev, "spi"); -+ if (IS_ERR(clk)) { -+ dev_err(dev, "no clock for device\n"); -+ ret = -ENODEV; -+ goto out; -+ } -+ -+ master = spi_alloc_master(dev, sizeof(*bs)); -+ if (!master) { -+ dev_err(dev, "out of memory\n"); -+ ret = -ENOMEM; -+ goto out_free; -+ } -+ -+ bs = spi_master_get_devdata(master); -+ init_completion(&bs->done); -+ -+ platform_set_drvdata(pdev, master); -+ bs->pdev = pdev; -+ -+ if (!request_mem_region(r->start, r->end - r->start, PFX)) { -+ dev_err(dev, "iomem request failed\n"); -+ ret = -ENXIO; -+ goto out_put_master; -+ } -+ -+ bs->regs = ioremap_nocache(r->start, r->end - r->start); -+ if (!bs->regs) { -+ dev_err(dev, "unable to ioremap regs\n"); -+ ret = -ENOMEM; -+ goto out_put_master; -+ } -+ bs->irq = irq; -+ bs->clk = clk; -+ bs->fifo_size = pdata->fifo_size; -+ -+ ret = request_irq(irq, bcm63xx_spi_interrupt, 0, pdev->name, master); -+ if (ret) { -+ dev_err(dev, "unable to request irq\n"); -+ goto out_unmap; -+ } -+ -+ master->bus_num = pdata->bus_num; -+ master->num_chipselect = pdata->num_chipselect; -+ master->setup = bcm63xx_spi_setup; -+ master->transfer = bcm63xx_transfer; -+ bs->speed_hz = pdata->speed_hz; -+ bs->stopping = 0; -+ bs->tx_io = (u8*)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA)); -+ bs->rx_io = (const u8*)(bs->regs + bcm63xx_spireg(SPI_RX_DATA)); -+ spin_lock_init(&bs->lock); -+ -+ /* Initialize hardware */ -+ clk_enable(bs->clk); -+ bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); -+ -+ /* register and we are done */ -+ ret = spi_register_master(master); -+ if (ret) { -+ dev_err(dev, "spi register failed\n"); -+ goto out_reset_hw; -+ } -+ -+ dev_info(dev, "at 0x%08x (irq %d, FIFOs size %d) v%s\n", -+ r->start, irq, bs->fifo_size, DRV_VER); -+ -+ return 0; -+ -+out_reset_hw: -+ clk_disable(clk); -+ free_irq(irq, master); -+out_unmap: -+ iounmap(bs->regs); -+out_put_master: -+ spi_master_put(master); -+out_free: -+ clk_put(clk); -+out: -+ return ret; -+} -+ -+static int __exit bcm63xx_spi_remove(struct platform_device *pdev) -+{ -+ struct spi_master *master = platform_get_drvdata(pdev); -+ struct bcm63xx_spi *bs = spi_master_get_devdata(master); -+ struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ -+ /* reset spi block */ -+ bcm_spi_writeb(bs, 0, SPI_INT_MASK); -+ spin_lock(&bs->lock); -+ bs->stopping = 1; -+ -+ /* HW shutdown */ -+ clk_disable(bs->clk); -+ clk_put(bs->clk); -+ -+ spin_unlock(&bs->lock); -+ -+ free_irq(bs->irq, master); -+ iounmap(bs->regs); -+ release_mem_region(r->start, r->end - r->start); -+ platform_set_drvdata(pdev, 0); -+ spi_unregister_master(master); -+ -+ return 0; -+} -+ -+#ifdef CONFIG_PM -+static int bcm63xx_spi_suspend(struct platform_device *pdev, pm_message_t mesg) -+{ -+ struct spi_master *master = platform_get_drvdata(pdev); -+ struct bcm63xx_spi *bs = spi_master_get_devdata(master); -+ -+ clk_disable(bs->clk); -+ -+ return 0; -+} -+ -+static int bcm63xx_spi_resume(struct platform_device *pdev) -+{ -+ struct spi_master *master = platform_get_drvdata(pdev); -+ struct bcm63xx_spi *bs = spi_master_get_devdata(master); -+ -+ clk_enable(bs->clk); -+ -+ return 0; -+} -+#else -+#define bcm63xx_spi_suspend NULL -+#define bcm63xx_spi_resume NULL -+#endif -+ -+static struct platform_driver bcm63xx_spi_driver = { -+ .driver = { -+ .name = "bcm63xx-spi", -+ .owner = THIS_MODULE, -+ }, -+ .probe = bcm63xx_spi_probe, -+ .remove = __exit_p(bcm63xx_spi_remove), -+ .suspend = bcm63xx_spi_suspend, -+ .resume = bcm63xx_spi_resume, -+}; -+ -+ -+static int __init bcm63xx_spi_init(void) -+{ -+ return platform_driver_register(&bcm63xx_spi_driver); -+} -+ -+static void __exit bcm63xx_spi_exit(void) -+{ -+ platform_driver_unregister(&bcm63xx_spi_driver); -+} -+ -+module_init(bcm63xx_spi_init); -+module_exit(bcm63xx_spi_exit); -+ -+MODULE_ALIAS("platform:bcm63xx_spi"); -+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>"); -+MODULE_AUTHOR("Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>"); -+MODULE_DESCRIPTION("Broadcom BCM63xx SPI Controller driver"); -+MODULE_LICENSE("GPL"); -+MODULE_VERSION(DRV_VER); ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -60,6 +60,12 @@ config SPI_ATMEL - This selects a driver for the Atmel SPI Controller, present on - many AT32 (AVR32) and AT91 (ARM) chips. - -+config SPI_BCM63XX -+ tristate "Broadcom BCM63xx SPI controller" -+ depends on BCM63XX -+ help -+ This is the SPI controller master driver for Broadcom BCM63xx SoC. -+ - config SPI_BFIN - tristate "SPI controller driver for ADI Blackfin5xx" - depends on BLACKFIN ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -48,6 +48,7 @@ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci. - obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o - obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o - obj-$(CONFIG_SPI_NUC900) += spi_nuc900.o -+obj-$(CONFIG_SPI_BCM63XX) += bcm63xx_spi.o - - # special build for s3c24xx spi driver with fiq support - spi_s3c24xx_hw-y := spi_s3c24xx.o ---- /dev/null -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h -@@ -0,0 +1,126 @@ -+#ifndef BCM63XX_DEV_SPI_H -+#define BCM63XX_DEV_SPI_H -+ -+#include <linux/types.h> -+#include <bcm63xx_io.h> -+#include <bcm63xx_regs.h> -+ -+int __init bcm63xx_spi_register(void); -+ -+struct bcm63xx_spi_pdata { -+ unsigned int fifo_size; -+ int bus_num; -+ int num_chipselect; -+ u32 speed_hz; -+}; -+ -+enum bcm63xx_regs_spi { -+ SPI_CMD, -+ SPI_INT_STATUS, -+ SPI_INT_MASK_ST, -+ SPI_INT_MASK, -+ SPI_ST, -+ SPI_CLK_CFG, -+ SPI_FILL_BYTE, -+ SPI_MSG_TAIL, -+ SPI_RX_TAIL, -+ SPI_MSG_CTL, -+ SPI_MSG_DATA, -+ SPI_RX_DATA, -+}; -+ -+static inline unsigned long bcm63xx_spireg(enum bcm63xx_regs_spi reg) -+{ -+#ifdef BCMCPU_RUNTIME_DETECT -+ extern const unsigned long *bcm63xx_regs_spi; -+ return bcm63xx_regs_spi[reg]; -+#else -+#ifdef CONFIG_BCM63XX_CPU_6338 -+switch (reg) { -+ case SPI_CMD: -+ return SPI_BCM_6338_SPI_CMD; -+ case SPI_INT_STATUS: -+ return SPI_BCM_6338_SPI_INT_STATUS; -+ case SPI_INT_MASK_ST: -+ return SPI_BCM_6338_SPI_MASK_INT_ST; -+ case SPI_INT_MASK: -+ return SPI_BCM_6338_SPI_INT_MASK; -+ case SPI_ST: -+ return SPI_BCM_6338_SPI_ST; -+ case SPI_CLK_CFG: -+ return SPI_BCM_6338_SPI_CLK_CFG; -+ case SPI_FILL_BYTE: -+ return SPI_BCM_6338_SPI_FILL_BYTE; -+ case SPI_MSG_TAIL: -+ return SPI_BCM_6338_SPI_MSG_TAIL; -+ case SPI_RX_TAIL: -+ return SPI_BCM_6338_SPI_RX_TAIL; -+ case SPI_MSG_CTL: -+ return SPI_BCM_6338_SPI_MSG_CTL; -+ case SPI_MSG_DATA: -+ return SPI_BCM_6338_SPI_MSG_DATA; -+ case SPI_RX_DATA: -+ return SPI_BCM_6338_SPI_RX_DATA; -+} -+#endif -+#ifdef CONFIG_BCM63XX_CPU_6348 -+switch (reg) { -+ case SPI_CMD: -+ return SPI_BCM_6348_SPI_CMD; -+ case SPI_INT_MASK_ST: -+ return SPI_BCM_6348_SPI_MASK_INT_ST; -+ case SPI_INT_MASK: -+ return SPI_BCM_6348_SPI_INT_MASK; -+ case SPI_INT_STATUS: -+ return SPI_BCM_6348_SPI_INT_STATUS; -+ case SPI_ST: -+ return SPI_BCM_6348_SPI_ST; -+ case SPI_CLK_CFG: -+ return SPI_BCM_6348_SPI_CLK_CFG; -+ case SPI_FILL_BYTE: -+ return SPI_BCM_6348_SPI_FILL_BYTE; -+ case SPI_MSG_TAIL: -+ return SPI_BCM_6348_SPI_MSG_TAIL; -+ case SPI_RX_TAIL: -+ return SPI_BCM_6348_SPI_RX_TAIL; -+ case SPI_MSG_CTL: -+ return SPI_BCM_6348_SPI_MSG_CTL; -+ case SPI_MSG_DATA: -+ return SPI_BCM_6348_SPI_MSG_DATA; -+ case SPI_RX_DATA: -+ return SPI_BCM_6348_SPI_RX_DATA; -+} -+#endif -+#ifdef CONFIG_BCM63XX_CPU_6358 -+switch (reg) { -+ case SPI_CMD: -+ return SPI_BCM_6358_SPI_CMD; -+ case SPI_INT_STATUS: -+ return SPI_BCM_6358_SPI_INT_STATUS; -+ case SPI_INT_MASK_ST: -+ return SPI_BCM_6358_SPI_MASK_INT_ST; -+ case SPI_INT_MASK: -+ return SPI_BCM_6358_SPI_INT_MASK; -+ case SPI_ST: -+ return SPI_BCM_6358_SPI_STATUS; -+ case SPI_CLK_CFG: -+ return SPI_BCM_6358_SPI_CLK_CFG; -+ case SPI_FILL_BYTE: -+ return SPI_BCM_6358_SPI_FILL_BYTE; -+ case SPI_MSG_TAIL: -+ return SPI_BCM_6358_SPI_MSG_TAIL; -+ case SPI_RX_TAIL: -+ return SPI_BCM_6358_SPI_RX_TAIL; -+ case SPI_MSG_CTL: -+ return SPI_BCM_6358_MSG_CTL; -+ case SPI_MSG_DATA: -+ return SPI_BCM_6358_SPI_MSG_DATA; -+ case SPI_RX_DATA: -+ return SPI_BCM_6358_SPI_RX_DATA; -+} -+#endif -+#endif -+ return 0; -+} -+ -+#endif /* BCM63XX_DEV_SPI_H */ ---- a/arch/mips/bcm63xx/Makefile -+++ b/arch/mips/bcm63xx/Makefile -@@ -1,6 +1,6 @@ - obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \ - dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \ -- dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o -+ dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o dev-spi.o - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - - obj-y += boards/ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -33,6 +33,7 @@ - #include <bcm63xx_dev_usb_ohci.h> - #include <bcm63xx_dev_usb_ehci.h> - #include <bcm63xx_dev_usb_udc.h> -+#include <bcm63xx_dev_spi.h> - #include <board_bcm963xx.h> - - #define PFX "board_bcm963xx: " -@@ -1587,6 +1588,9 @@ int __init board_register_devices(void) - if (board.num_spis) - spi_register_board_info(board.spis, board.num_spis); - -+ if (!BCMCPU_IS_6345()) -+ bcm63xx_spi_register(); -+ - /* read base address of boot chip select (0) */ - if (BCMCPU_IS_6345()) - val = 0x1fc00000; diff --git a/target/linux/brcm63xx/patches-2.6.35/250-6358-enet1-external-mii-clk.patch b/target/linux/brcm63xx/patches-2.6.35/250-6358-enet1-external-mii-clk.patch deleted file mode 100644 index 3e033fb..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/250-6358-enet1-external-mii-clk.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1477,6 +1477,8 @@ void __init board_prom_init(void) - if (BCMCPU_IS_6348()) - val |= GPIO_MODE_6348_G3_EXT_MII | - GPIO_MODE_6348_G0_EXT_MII; -+ else if (BCMCPU_IS_6358()) -+ val |= GPIO_MODE_6358_ENET1_MII_CLK_INV; - } - - bcm_gpio_writel(val, GPIO_MODE_REG); ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -@@ -402,6 +402,8 @@ - #define GPIO_MODE_6358_EXTRA_SPI_SS (1 << 7) - #define GPIO_MODE_6358_SERIAL_LED (1 << 10) - #define GPIO_MODE_6358_UTOPIA (1 << 12) -+#define GPIO_MODE_6358_ENET0_MII_CLK_INV (1 << 30) -+#define GPIO_MODE_6358_ENET1_MII_CLK_INV (1 << 31) - - - /************************************************************************* diff --git a/target/linux/brcm63xx/patches-2.6.35/260-no_ehci_over_current_check.patch b/target/linux/brcm63xx/patches-2.6.35/260-no_ehci_over_current_check.patch deleted file mode 100644 index c060710..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/260-no_ehci_over_current_check.patch +++ /dev/null @@ -1,16 +0,0 @@ ---- a/drivers/usb/host/ehci-hub.c -+++ b/drivers/usb/host/ehci-hub.c -@@ -837,11 +837,13 @@ static int ehci_hub_control ( - * power switching; they're allowed to just limit the - * current. khubd will turn the power back on. - */ -+#ifndef CONFIG_BCM63XX - if (HCS_PPC (ehci->hcs_params)){ - ehci_writel(ehci, - temp & ~(PORT_RWC_BITS | PORT_POWER), - status_reg); - } -+#endif - } - - /* whoever resumes must GetPortStatus to complete it!! */ diff --git a/target/linux/brcm63xx/patches-2.6.35/270-board-96338W2_E7T.patch b/target/linux/brcm63xx/patches-2.6.35/270-board-96338W2_E7T.patch deleted file mode 100644 index c6bd1c8..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/270-board-96338W2_E7T.patch +++ /dev/null @@ -1,49 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -135,6 +135,38 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_96338w2_e7t = { -+ .name = "96338W2_E7T", -+ .expected_cpu_id = 0x6338, -+ -+ .has_enet0 = 1, -+ -+ .enet0 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .leds = { -+ { -+ .name = "ppp", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ { -+ .name = "ppp-fail", -+ .gpio = 5, -+ .active_low = 1, -+ }, -+ { -+ .name = "power", -+ .gpio = 0, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ -+ }, -+ }, -+}; - #endif - - /* -@@ -1264,6 +1296,7 @@ static const struct board_info __initdat - #ifdef CONFIG_BCM63XX_CPU_6338 - &board_96338gw, - &board_96338w, -+ &board_96338w2_e7t, - #endif - #ifdef CONFIG_BCM63XX_CPU_6345 - &board_96345gw2, diff --git a/target/linux/brcm63xx/patches-2.6.35/300-wl_exports.patch b/target/linux/brcm63xx/patches-2.6.35/300-wl_exports.patch deleted file mode 100644 index aa7322d..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/300-wl_exports.patch +++ /dev/null @@ -1,34 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -49,6 +49,13 @@ static unsigned int mac_addr_used; - static struct board_info board; - - /* -+ * Required export for WL -+ */ -+#define NVRAM_SPACE 0x8000 -+char nvram_buf[NVRAM_SPACE]; -+EXPORT_SYMBOL(nvram_buf); -+ -+/* - * known 6338 boards - */ - #ifdef CONFIG_BCM63XX_CPU_6338 -@@ -1444,6 +1451,7 @@ void __init board_prom_init(void) - - /* extract nvram data */ - memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram)); -+ memcpy(&nvram_buf, boot_addr + BCM963XX_NVRAM_OFFSET, NVRAM_SPACE); - - /* check checksum before using data */ - if (nvram.version <= 4) ---- a/arch/mips/mm/cache.c -+++ b/arch/mips/mm/cache.c -@@ -52,6 +52,7 @@ void (*_dma_cache_wback)(unsigned long s - void (*_dma_cache_inv)(unsigned long start, unsigned long size); - - EXPORT_SYMBOL(_dma_cache_wback_inv); -+EXPORT_SYMBOL(_dma_cache_inv); - - #endif /* CONFIG_DMA_NONCOHERENT */ - diff --git a/target/linux/brcm63xx/patches-2.6.35/310-CPVA642_board.patch b/target/linux/brcm63xx/patches-2.6.35/310-CPVA642_board.patch deleted file mode 100644 index 480e190..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/310-CPVA642_board.patch +++ /dev/null @@ -1,109 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -662,6 +662,98 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_CPVA642 = { -+ .name = "CPVA642", -+ .expected_cpu_id = 0x6358, -+ -+ .has_uart0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .leds = { -+ /* bi-color */ -+ { -+ .name = "power:red", -+ .gpio = 14, -+ .active_low = 1, -+ }, -+ { -+ .name = "power:green", -+ .gpio = 11, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ { -+ .name = "wifi:red", -+ .gpio = 6, -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi:green", -+ .gpio = 28, -+ .active_low = 0, -+ }, -+ { -+ .name = "link:red", -+ .gpio = 9, -+ .active_low = 1, -+ }, -+ { -+ .name = "link:green", -+ .gpio = 10, -+ .active_low = 1, -+ }, -+ /* green only */ -+ { -+ .name = "ether", -+ .gpio = 1, -+ .active_low = 1, -+ }, -+ { -+ .name = "phone1", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ { -+ .name = "phone2", -+ .gpio = 2, -+ .active_low = 1, -+ }, -+ { -+ .name = "usb", -+ .gpio = 3, -+ .active_low = 1, -+ }, -+ }, -+ -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 36, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ { -+ .desc = "wps", -+ .gpio = 37, -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ }, -+ }, -+}; -+ -+ - static struct board_info __initdata board_AGPFS0 = { - .name = "AGPF-S0", - .expected_cpu_id = 0x6358, -@@ -1324,6 +1416,7 @@ static const struct board_info __initdat - &board_96358vw, - &board_96358vw2, - &board_AGPFS0, -+ &board_CPVA642, - &board_DWVS0, - &board_nb4_ser_r0, - &board_nb4_ser_r1, diff --git a/target/linux/brcm63xx/patches-2.6.35/400-board_96358gw.patch b/target/linux/brcm63xx/patches-2.6.35/400-board_96358gw.patch deleted file mode 100644 index d008e1d..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/400-board_96358gw.patch +++ /dev/null @@ -1,70 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -562,6 +562,59 @@ static struct board_info __initdata boar - * known 6358 boards - */ - #ifdef CONFIG_BCM63XX_CPU_6358 -+ -+static struct board_info __initdata board_96358gw = { -+ .name = "96358GW", -+ .expected_cpu_id = 0x6358, -+ -+ .has_uart0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .leds = { -+ { -+ .name = "power:green", -+ .gpio = 5, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ { -+ .name = "power:red", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ { -+ .name = "adsl", -+ .gpio = 9, -+ .active_low = 1, -+ }, -+ { -+ .name = "internet:green", -+ .gpio = 2, -+ }, -+ { -+ .name = "internet:red", -+ .gpio = 10, -+ }, -+ }, -+ -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 34, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, -+}; -+ - static struct board_info __initdata board_96358vw = { - .name = "96358VW", - .expected_cpu_id = 0x6358, -@@ -1413,6 +1466,7 @@ static const struct board_info __initdat - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 -+ &board_96358gw, - &board_96358vw, - &board_96358vw2, - &board_AGPFS0, diff --git a/target/linux/brcm63xx/patches-2.6.35/410-boardid_fixup.patch b/target/linux/brcm63xx/patches-2.6.35/410-boardid_fixup.patch deleted file mode 100644 index 286d9ac..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/410-boardid_fixup.patch +++ /dev/null @@ -1,62 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -35,6 +35,7 @@ - #include <bcm63xx_dev_usb_udc.h> - #include <bcm63xx_dev_spi.h> - #include <board_bcm963xx.h> -+#include <bcm_tag.h> - - #define PFX "board_bcm963xx: " - -@@ -44,6 +45,9 @@ - #define NB4_SPI_GPIO_CLK 6 - #define NB4_74HC64_GPIO(X) (NB4_74X164_GPIO_BASE + (X)) - -+#define CFE_OFFSET_64K 0x10000 -+#define CFE_OFFSET_128K 0x20000 -+ - static struct bcm963xx_nvram nvram; - static unsigned int mac_addr_used; - static struct board_info board; -@@ -1566,6 +1570,29 @@ static int board_get_mac_address(u8 *mac - return 0; - } - -+static void __init boardid_fixup(u8 *boot_addr) -+{ -+ struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K); -+ -+ /* check if bcm_tag is at 64k offset */ -+ if (strncmp(nvram.name, tag->boardid, BOARDID_LEN) != 0) { -+ /* else try 128k */ -+ tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_128K); -+ if (strncmp(nvram.name, tag->boardid, BOARDID_LEN) != 0) { -+ /* No tag found */ -+ printk(KERN_DEBUG "No bcm_tag found!\n"); -+ return; -+ } -+ } -+ /* check if we should override the boardid */ -+ if (tag->information1[0] != '+') -+ return; -+ -+ strncpy(nvram.name, &tag->information1[1], BOARDID_LEN); -+ -+ printk(KERN_INFO "Overriding boardid with '%s'\n", nvram.name); -+} -+ - /* - * early init callback, read nvram data from flash and checksum it - */ -@@ -1617,6 +1644,11 @@ void __init board_prom_init(void) - /* Fixup broken nb4 board name */ - nb4_nvram_fixup(); - -+ if (strcmp(cfe_version, "unknown") != 0) { -+ /* cfe present */ -+ boardid_fixup(boot_addr); -+ } -+ - /* find board by name */ - for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) { - if (strncmp(nvram.name, bcm963xx_boards[i]->name, diff --git a/target/linux/brcm63xx/patches-2.6.35/420-board_spw500v.patch b/target/linux/brcm63xx/patches-2.6.35/420-board_spw500v.patch deleted file mode 100644 index 4f02951..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/420-board_spw500v.patch +++ /dev/null @@ -1,78 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -560,6 +560,67 @@ static struct board_info __initdata boar - - }; - -+static struct board_info __initdata board_spw500v = { -+ .name = "SPW500V", -+ .expected_cpu_id = 0x6348, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .has_dsp = 1, -+ .dsp = { -+ .gpio_rst = 6, -+ .gpio_int = 34, -+ .ext_irq = 2, -+ .cs = 2, -+ }, -+ -+ .leds = { -+ { -+ .name = "power:red", -+ .gpio = 1, -+ .active_low = 1, -+ }, -+ { -+ .name = "power:green", -+ .gpio = 0, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ { -+ .name = "ppp", -+ .gpio = 3, -+ .active_low = 1, -+ }, -+ { .name = "pstn", -+ .gpio = 28, -+ .active_low = 1, -+ }, -+ { -+ .name = "voip", -+ .gpio = 32, -+ .active_low = 1, -+ }, -+ }, -+ -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 33, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, -+}; -+ - #endif - - /* -@@ -1467,6 +1528,7 @@ static const struct board_info __initdat - &board_96348gw_a, - &board_rta1025w_16, - &board_96348_D4PW, -+ &board_spw500v, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 diff --git a/target/linux/brcm63xx/patches-2.6.35/430-board_gw6200_gw6000.patch b/target/linux/brcm63xx/patches-2.6.35/430-board_gw6200_gw6000.patch deleted file mode 100644 index 2e2398e..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/430-board_gw6200_gw6000.patch +++ /dev/null @@ -1,129 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -432,6 +432,117 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_gw6200 = { -+ .name = "GW6200", -+ .expected_cpu_id = 0x6348, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ -+ .has_dsp = 1, -+ .dsp = { -+ .gpio_rst = 8, /* FIXME: What is real GPIO here? */ -+ .gpio_int = 34, -+ .ext_irq = 2, -+ .cs = 2, -+ }, -+ -+ .leds = { -+ { -+ .name = "line1", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ { -+ .name = "line2", -+ .gpio = 5, -+ .active_low = 1, -+ }, -+ { -+ .name = "line3", -+ .gpio = 6, -+ .active_low = 1, -+ }, -+ { -+ .name = "tel", -+ .gpio = 7, -+ .active_low = 1, -+ }, -+ { -+ .name = "ethernet", -+ .gpio = 35, -+ .active_low = 1, -+ }, -+ }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 36, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, -+}; -+ -+static struct board_info __initdata board_gw6000 = { -+ .name = "GW6000", -+ .expected_cpu_id = 0x6348, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ -+ .has_dsp = 1, -+ .dsp = { -+ .gpio_rst = 6, -+ .gpio_int = 34, -+ .ext_irq = 2, -+ .cs = 2, -+ }, -+ -+ /* GW6000 has no GPIO-controlled leds */ -+ -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 36, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, -+}; -+ -+ -+ - static struct board_info __initdata board_FAST2404 = { - .name = "F@ST2404", - .expected_cpu_id = 0x6348, -@@ -1521,6 +1632,8 @@ static const struct board_info __initdat - #ifdef CONFIG_BCM63XX_CPU_6348 - &board_96348r, - &board_96348gw, -+ &board_gw6000, -+ &board_gw6200, - &board_96348gw_10, - &board_96348gw_11, - &board_FAST2404, diff --git a/target/linux/brcm63xx/patches-2.6.35/440-new_96348gw-11_leds.patch b/target/linux/brcm63xx/patches-2.6.35/440-new_96348gw-11_leds.patch deleted file mode 100644 index e1b6342..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/440-new_96348gw-11_leds.patch +++ /dev/null @@ -1,60 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -364,6 +364,49 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_ct536_ct5621 = { -+ .name = "CT536_CT5621", -+ .expected_cpu_id = 0x6348, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 0, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+ -+ .leds = { -+ { -+ .name = "adsl-fail", -+ .gpio = 2, -+ .active_low = 1, -+ }, -+ { -+ .name = "power", -+ .gpio = 0, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ }, -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 33, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ }, -+ }, -+}; -+ - static struct board_info __initdata board_96348gw = { - .name = "96348GW", - .expected_cpu_id = 0x6348, -@@ -1642,6 +1685,7 @@ static const struct board_info __initdat - &board_rta1025w_16, - &board_96348_D4PW, - &board_spw500v, -+ &board_ct536_ct5621, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 diff --git a/target/linux/brcm63xx/patches-2.6.35/450-board-MAGIC.patch b/target/linux/brcm63xx/patches-2.6.35/450-board-MAGIC.patch deleted file mode 100644 index ad458f3..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/450-board-MAGIC.patch +++ /dev/null @@ -1,89 +0,0 @@ -Index: linux-2.6.35.9/arch/mips/bcm63xx/boards/board_bcm963xx.c -=================================================================== ---- linux-2.6.35.9.orig/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ linux-2.6.35.9/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -775,6 +775,76 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_96348sv = { -+ .name = "MAGIC", -+ .expected_cpu_id = 0x6348, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ .enet1 = { -+ /* is has BP_ENET_EXTERNAL_PHY */ -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+ -+ .has_dsp = 1, -+ .dsp = { -+ .gpio_rst = 25, -+ .gpio_int = 34, -+ .cs = 2, -+ .ext_irq = 2, -+ }, -+ -+ .leds = { -+ { -+ .name = "voip", -+ .gpio = 22, -+ .active_low = 1, -+ }, -+ { -+ .name = "adsl", -+ .gpio = 5, -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi", -+ .gpio = 28, -+ }, -+ { -+ .name = "usb", -+ .gpio = 35, -+ .active_low = 1, -+ }, -+ { -+ .name = "hpna", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ { -+ .name = "power", -+ .gpio = 0, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ { -+ .name = "stop", -+ .gpio = 1, -+ .active_low = 1, -+ }, -+ }, -+}; -+ - #endif - - /* -@@ -1686,6 +1756,7 @@ static const struct board_info __initdat - &board_96348_D4PW, - &board_spw500v, - &board_ct536_ct5621, -+ &board_96348sv, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 diff --git a/target/linux/brcm63xx/patches-2.6.35/451-board_hw553.patch b/target/linux/brcm63xx/patches-2.6.35/451-board_hw553.patch deleted file mode 100644 index 6a288c3..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/451-board_hw553.patch +++ /dev/null @@ -1,90 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1730,6 +1730,79 @@ static struct board_info __initdata boar - }; - #endif - -+static struct board_info __initdata board_HW553 = { -+ .name = "HW553", -+ .expected_cpu_id = 0x6358, -+ -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .leds = { -+ /*Each led on HW553 is bi-color (except wifi) */ -+ { -+ .name = "lan:red", -+ .gpio = 34, -+ .active_low = 1, -+ }, -+ { -+ .name = "lan:blue", -+ .gpio = 35, -+ .active_low = 1, -+ }, -+ { -+ .name = "adsl:red", -+ .gpio = 22, -+ .active_low = 1, -+ }, -+ { -+ .name = "adsl:blue", -+ .gpio = 23, -+ .active_low = 1, -+ }, -+ { -+ .name = "power:red", -+ .gpio = 5, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ -+ { -+ .name = "power:blue", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi:red", -+ .gpio = 25, -+ .active_low = 1, -+ }, -+ { -+ .name = "internetkey:red", -+ .gpio = 12, -+ .active_low = 1, -+ }, -+ { -+ .name = "internetkey:blue", -+ .gpio = 13, -+ .active_low = 1, -+ }, -+ }, -+}; -+ - /* - * all boards - */ -@@ -1771,6 +1844,7 @@ static const struct board_info __initdat - &board_nb4_ser_r2, - &board_nb4_fxc_r1, - &board_nb4_fxc_r2, -+ &board_HW553, - #endif - }; - diff --git a/target/linux/brcm63xx/patches-2.6.35/452-board_rta1320_16m.patch b/target/linux/brcm63xx/patches-2.6.35/452-board_rta1320_16m.patch deleted file mode 100644 index 11ab4a3..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/452-board_rta1320_16m.patch +++ /dev/null @@ -1,54 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -178,6 +178,43 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_rta1320_16m = { -+ .name = "RTA1320_16M", -+ .expected_cpu_id = 0x6338, -+ -+ .has_uart0 = 1, -+ .has_enet0 = 1, -+ -+ .enet0 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .leds = { -+ { -+ .name = "adsl", -+ .gpio = 3, -+ .active_low = 1, -+ }, -+ { -+ .name = "ppp", -+ .gpio = 4, -+ .active_low = 1, -+ }, -+ { -+ .name = "power", -+ .gpio = 0, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, -+ { -+ .name = "stop", -+ .gpio = 1, -+ .active_low = 1, -+ }, -+ }, -+}; - #endif - - /* -@@ -1811,6 +1848,7 @@ static const struct board_info __initdat - &board_96338gw, - &board_96338w, - &board_96338w2_e7t, -+ &board_rta1320_16m, - #endif - #ifdef CONFIG_BCM63XX_CPU_6345 - &board_96345gw2, diff --git a/target/linux/brcm63xx/patches-2.6.35/977-ssb_export_fallback_sprom.patch b/target/linux/brcm63xx/patches-2.6.35/977-ssb_export_fallback_sprom.patch deleted file mode 100644 index 67f12c8..0000000 --- a/target/linux/brcm63xx/patches-2.6.35/977-ssb_export_fallback_sprom.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/drivers/ssb/sprom.c -+++ b/drivers/ssb/sprom.c -@@ -176,6 +176,7 @@ const struct ssb_sprom *ssb_get_fallback - { - return fallback_sprom; - } -+EXPORT_SYMBOL(ssb_get_fallback_sprom); - - /* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */ - bool ssb_is_sprom_available(struct ssb_bus *bus) ---- a/include/linux/ssb/ssb.h -+++ b/include/linux/ssb/ssb.h -@@ -405,6 +405,7 @@ extern bool ssb_is_sprom_available(struc - /* Set a fallback SPROM. - * See kdoc at the function definition for complete documentation. */ - extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom); -+extern const struct ssb_sprom *ssb_get_fallback_sprom(void); - - /* Suspend a SSB bus. - * Call this from the parent bus suspend routine. */ |