diff options
Diffstat (limited to 'target')
12 files changed, 171 insertions, 3 deletions
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 73dc255..d8b35ae 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -46,6 +46,7 @@ case "$FIRMWARE" in ;; argus-atp52b | \ + bc2 | \ fonera20n | \ hw550-3g | \ mofi3500-3gn | \ diff --git a/target/linux/ramips/base-files/etc/uci-defaults/bc2 b/target/linux/ramips/base-files/etc/uci-defaults/bc2 new file mode 100644 index 0000000..3a93df2 --- /dev/null +++ b/target/linux/ramips/base-files/etc/uci-defaults/bc2 @@ -0,0 +1,36 @@ +#!/bin/sh +# +# Copyright (C) 2011 OpenWrt.org +# + +bc2_set_macs() { + local part + local lan_mac + local wan_mac + + [ -z $(which maccalc) ] && return + + . /etc/functions.sh + + part=$(find_mtd_part "factory") + [ -z $part ] && return + + lan_mac=$(dd bs=1 skip=4 count=6 if=$part 2>/dev/null | maccalc bin2mac) + [ -z $lan_mac ] && return + + wan_mac=$(maccalc add $lan_mac 1) + + uci batch <<EOF +set network.lan.macaddr='$lan_mac' +set network.wan.macaddr='$wan_mac' +commit network +EOF +} + +. /lib/ramips.sh + +board=$(ramips_board_name) + +if [ "${board}" == "bc2" ]; then + bc2_set_macs +fi diff --git a/target/linux/ramips/base-files/etc/uci-defaults/leds b/target/linux/ramips/base-files/etc/uci-defaults/leds index 8f7f748..e6c7e84 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/leds +++ b/target/linux/ramips/base-files/etc/uci-defaults/leds @@ -19,6 +19,9 @@ EOF board=$(ramips_board_name) case $board in + bc2) + set_usb_led "bc2:blue:usb" + ;; fonera20n) set_usb_led "fonera20n:amber:usb" ;; diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac index 4be625b..290e270 100644 --- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac +++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac @@ -24,7 +24,7 @@ preinit_set_mac_address() { . /lib/ramips.sh case $(ramips_board_name) in - nw718) + bc2 | nw718) nw718_set_mac ;; esac diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 227ca82..de37e69 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -37,6 +37,9 @@ ramips_board_name() { *"NBG-419N") name="nbg-419n" ;; + *"NexAira BC2") + name="bc2" + ;; *"NW718") name="nw718" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 58ba0f0..3bc95dd 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -14,7 +14,7 @@ platform_check_image() { [ "$ARGC" -gt 1 ] && return 1 case "$board" in - dir-300-b1 | dir-600-b1 | dir-600-b2 | fonera20n | nbg-419n | nw718 | rt-g32-b1 | v22rw-2x2 | whr-g300n | hw550-3g | mofi3500-3gn) + bc2 | dir-300-b1 | dir-600-b1 | dir-600-b2 | fonera20n | nbg-419n | nw718 | rt-g32-b1 | v22rw-2x2 | whr-g300n | hw550-3g | mofi3500-3gn) [ "$magic" != "2705" ] && { echo "Invalid image type." return 1 diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h index 2145bec..72cd9c7 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h @@ -26,6 +26,7 @@ enum ramips_mach_type { /* RT3052 based machines */ RAMIPS_MACH_ARGUS_ATP52B, /* Argus ATP-52B */ + RAMIPS_MACH_BC2, /* NexAira BC2 */ RAMIPS_MACH_F5D8235_V2, /* Belkin F5D8235 v2 */ RAMIPS_MACH_FONERA20N, /* La Fonera 2.0N */ RAMIPS_MACH_HW550_3G, /* Aztech HW550-3G */ diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig index 392fb4f..e8a1a25 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig @@ -51,6 +51,11 @@ config RT305X_MACH_NW718 select RALINK_DEV_GPIO_BUTTONS select RALINK_DEV_GPIO_LEDS +config RT305X_MACH_BC2 + bool "NexAira BC2" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + config RT305X_MACH_PWH2004 bool "Prolink PWH2004 / Abocom WR5205 support (32M RAM, 8M flash)" select RALINK_DEV_GPIO_BUTTONS diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile index 2853429..76a7830 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile @@ -12,6 +12,7 @@ obj-y := irq.o setup.o devices.o rt305x.o clock.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_RT305X_MACH_ARGUS_ATP52B) += mach-argus-atp52b.o +obj-$(CONFIG_RT305X_MACH_BC2) += mach-bc2.o obj-$(CONFIG_RT305X_MACH_DIR_300_REVB) += mach-dir-300-revb.o obj-$(CONFIG_RT305X_MACH_F5D8235_V2) += mach-f5d8235-v2.o obj-$(CONFIG_RT305X_MACH_FONERA20N) += mach-fonera20n.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-bc2.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-bc2.c new file mode 100644 index 0000000..21755cb --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-bc2.c @@ -0,0 +1,112 @@ +/* + * NexAira BC2 board support + * + * Copyright (C) 2011 Adam J. Porter <porter.adam@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define BC2_GPIO_BUTTON_RESET 17 +#define BC2_GPIO_LED_USB 20 + +#define BC2_BUTTONS_POLL_INTERVAL 20 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition bc2_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x030000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "factory", + .offset = 0x040000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x050000, + .size = 0x0a0000, + }, { + .name = "rootfs", + .offset = 0x150000, + .size = 0x6b0000, + }, { + .name = "firmware", + .offset = 0x050000, + .size = 0x7b0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct physmap_flash_data bc2_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .nr_parts = ARRAY_SIZE(bc2_partitions), + .parts = bc2_partitions, +#endif +}; + +static struct gpio_led bc2_leds_gpio[] __initdata = { + { + .name = "bc2:blue:usb", + .gpio = BC2_GPIO_LED_USB, + .active_low = 1, + } +}; + +static struct gpio_button bc2_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .threshold = 3, + .gpio = BC2_GPIO_BUTTON_RESET, + .active_low = 1, + } +}; + +static void __init bc2_init(void) +{ + rt305x_gpio_init((RT305X_GPIO_MODE_GPIO << + RT305X_GPIO_MODE_UART0_SHIFT) | + RT305X_GPIO_MODE_JTAG); + + rt305x_register_flash(0, &bc2_flash_data); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(bc2_leds_gpio), + bc2_leds_gpio); + + ramips_register_gpio_buttons(-1, BC2_BUTTONS_POLL_INTERVAL, + ARRAY_SIZE(bc2_gpio_buttons), + bc2_gpio_buttons); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_BC2, "BC2", "NexAira BC2", + bc2_init); diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 9136f3a..69c84e6 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -154,6 +154,10 @@ define Image/Build/Profile/FONERA20N $(call Image/Build/Template/GENERIC_8M,$(1),fonera20n,FONERA20N) endef +define Image/Build/Profile/BC2 + $(call Image/Build/Template/GENERIC_8M,$(1),bc2,BC2) +endef + define Image/Build/Profile/NBG419N $(call Image/Build/Template/GENERIC_4M,$(1),nbg-419n,NBG-419N) endef @@ -237,6 +241,7 @@ endef ifeq ($(CONFIG_RALINK_RT305X),y) define Image/Build/Profile/Default $(call Image/Build/Profile/ARGUS_ATP52B,$(1)) + $(call Image/Build/Profile/BC2,$(1)) $(call Image/Build/Profile/DIR300B1,$(1)) $(call Image/Build/Profile/RTG32B1,$(1)) $(call Image/Build/Profile/FONERA20N,$(1)) diff --git a/target/linux/ramips/rt305x/config-2.6.39 b/target/linux/ramips/rt305x/config-2.6.39 index 643c938..5d7e4b1 100644 --- a/target/linux/ramips/rt305x/config-2.6.39 +++ b/target/linux/ramips/rt305x/config-2.6.39 @@ -92,13 +92,14 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y CONFIG_RALINK_RT305X=y CONFIG_RAMIPS_WDT=y CONFIG_RT305X_MACH_ARGUS_ATP52B=y +CONFIG_RT305X_MACH_BC2=y CONFIG_RT305X_MACH_DIR_300_REVB=y CONFIG_RT305X_MACH_F5D8235_V2=y CONFIG_RT305X_MACH_FONERA20N=y CONFIG_RT305X_MACH_HW550_3G=y CONFIG_RT305X_MACH_MOFI3500_3GN=y -CONFIG_RT305X_MACH_NW718=y CONFIG_RT305X_MACH_NBG_419N=y +CONFIG_RT305X_MACH_NW718=y CONFIG_RT305X_MACH_PWH2004=y CONFIG_RT305X_MACH_RT_G32_REVB=y CONFIG_RT305X_MACH_V22RW_2X2=y |