diff options
Diffstat (limited to 'target')
-rw-r--r-- | target/linux/omap24xx/patches-2.6.37/300-nokia-board.patch | 192 | ||||
-rw-r--r-- | target/linux/omap24xx/patches-2.6.37/900-n810-battery-management.patch | 52 |
2 files changed, 110 insertions, 134 deletions
diff --git a/target/linux/omap24xx/patches-2.6.37/300-nokia-board.patch b/target/linux/omap24xx/patches-2.6.37/300-nokia-board.patch index 9e7ea4b..d8c48b8 100644 --- a/target/linux/omap24xx/patches-2.6.37/300-nokia-board.patch +++ b/target/linux/omap24xx/patches-2.6.37/300-nokia-board.patch @@ -11,8 +11,8 @@ Index: linux-2.6.37/arch/arm/mach-omap1/board-nokia770.c =================================================================== ---- linux-2.6.37.orig/arch/arm/mach-omap1/board-nokia770.c 2011-01-27 14:17:04.376000007 +0100 -+++ linux-2.6.37/arch/arm/mach-omap1/board-nokia770.c 2011-01-27 14:17:29.131000007 +0100 +--- linux-2.6.37.orig/arch/arm/mach-omap1/board-nokia770.c 2011-01-05 01:50:19.000000000 +0100 ++++ linux-2.6.37/arch/arm/mach-omap1/board-nokia770.c 2011-01-28 18:09:59.378233620 +0100 @@ -36,6 +36,7 @@ #include <plat/lcd_mipid.h> #include <plat/mmc.h> @@ -47,8 +47,8 @@ Index: linux-2.6.37/arch/arm/mach-omap1/board-nokia770.c static void mipid_shutdown(struct mipid_platform_data *pdata) Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c =================================================================== ---- linux-2.6.37.orig/arch/arm/mach-omap2/board-n8x0.c 2011-01-27 14:17:04.381000007 +0100 -+++ linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c 2011-01-27 14:17:29.132000007 +0100 +--- linux-2.6.37.orig/arch/arm/mach-omap2/board-n8x0.c 2011-01-05 01:50:19.000000000 +0100 ++++ linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c 2011-01-28 18:13:25.864968462 +0100 @@ -18,9 +18,13 @@ #include <linux/io.h> #include <linux/stddef.h> @@ -72,7 +72,7 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c #include "mux.h" -@@ -40,109 +46,154 @@ +@@ -40,109 +46,162 @@ static int slot2_cover_open; static struct device *mmc_device; @@ -81,43 +81,14 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c -#define TUSB6010_GPIO_INT 58 -#define TUSB6010_GPIO_ENABLE 0 -#define TUSB6010_DMACHAN 0x3f -- --#if defined(CONFIG_USB_TUSB6010) || \ -- defined(CONFIG_USB_TUSB6010_MODULE) --/* -- * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and -- * 1.5 V voltage regulators of PM companion chip. Companion chip will then -- * provide then PGOOD signal to TUSB6010 which will release it from reset. -- */ --static int tusb_set_power(int state) --{ -- int i, retval = 0; -- -- if (state) { -- gpio_set_value(TUSB6010_GPIO_ENABLE, 1); -- msleep(1); -- -- /* Wait until TUSB6010 pulls INT pin down */ -- i = 100; -- while (i && gpio_get_value(TUSB6010_GPIO_INT)) { -- msleep(1); -- i--; -- } -- -- if (!i) { -- printk(KERN_ERR "tusb: powerup failed\n"); -- retval = -ENODEV; -- } -- } else { -- gpio_set_value(TUSB6010_GPIO_ENABLE, 0); -- msleep(10); -- } -- -- return retval; +#define RX51_TSC2005_RESET_GPIO 94 +#define RX51_TSC2005_IRQ_GPIO 106 +#define OMAP_TAG_NOKIA_BT 0x4e01 + ++/* We map the FN key as LALT to workaround an X keycode problem. ++ * The XKB map needs to be adjusted to support this. */ ++#define MAP_FN_AS_LEFTALT ++ +static s16 rx44_keymap[LM8323_KEYMAP_SIZE] = { + [0x01] = KEY_Q, + [0x02] = KEY_K, @@ -149,10 +120,24 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c + [0x22] = KEY_SEMICOLON, + [0x23] = KEY_MINUS, + [0x24] = KEY_EQUAL, ++#ifdef MAP_FN_AS_LEFTALT ++ [0x2b] = KEY_LEFTALT, ++#else + [0x2b] = KEY_FN, ++#endif + [0x2c] = KEY_M, + [0x2f] = KEY_F8, -+ + +-#if defined(CONFIG_USB_TUSB6010) || \ +- defined(CONFIG_USB_TUSB6010_MODULE) +-/* +- * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and +- * 1.5 V voltage regulators of PM companion chip. Companion chip will then +- * provide then PGOOD signal to TUSB6010 which will release it from reset. +- */ +-static int tusb_set_power(int state) +-{ +- int i, retval = 0; + [0x31] = KEY_R, + [0x32] = KEY_RIGHTCTRL, + [0x34] = KEY_SPACE, @@ -217,16 +202,46 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c + n8x0_bt_device.dev.platform_data = (void *) bt_config; + if (platform_device_register(&n8x0_bt_device) < 0) + BUG(); - } ++} + +- if (state) { +- gpio_set_value(TUSB6010_GPIO_ENABLE, 1); +- msleep(1); ++static struct omap2_mcspi_device_config mipid_mcspi_config = { ++ .turbo_mode = 0, ++ .single_channel = 1, ++}; +- /* Wait until TUSB6010 pulls INT pin down */ +- i = 100; +- while (i && gpio_get_value(TUSB6010_GPIO_INT)) { +- msleep(1); +- i--; +- } ++static int slot1_cover_open; ++static int slot2_cover_open; ++static struct device *mmc_device; + +- if (!i) { +- printk(KERN_ERR "tusb: powerup failed\n"); +- retval = -ENODEV; +- } +- } else { +- gpio_set_value(TUSB6010_GPIO_ENABLE, 0); +- msleep(10); +- } + +- return retval; +-} +- -static struct musb_hdrc_config musb_config = { - .multipoint = 1, - .dyn_fifo = 1, - .num_eps = 16, - .ram_bits = 12, -+static struct omap2_mcspi_device_config mipid_mcspi_config = { ++static struct omap2_mcspi_device_config p54spi_mcspi_config = { + .turbo_mode = 0, -+ .single_channel = 1, ++ .single_channel = 1, }; -static struct musb_hdrc_platform_data tusb_data = { @@ -236,15 +251,20 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c - .mode = MUSB_PERIPHERAL, -#else /* defined(CONFIG_USB_MUSB_HOST) */ - .mode = MUSB_HOST, --#endif ++#ifdef CONFIG_MACH_NOKIA_N8X0_LCD ++extern struct mipid_platform_data n8x0_mipid_platform_data; + #endif - .set_power = tusb_set_power, - .min_power = 25, /* x2 = 50 mA drawn from VBUS as peripheral */ - .power = 100, /* Max 100 mA VBUS for host mode */ - .config = &musb_config, -}; -- + -static void __init n8x0_usb_init(void) --{ ++#ifdef CONFIG_TOUCHSCREEN_TSC2005 ++static struct tsc2005_platform_data tsc2005_config; ++static void rx51_tsc2005_set_reset(bool enable) + { - int ret = 0; - static char announce[] __initdata = KERN_INFO "TUSB 6010\n"; - @@ -258,42 +278,28 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c - gpio_direction_output(TUSB6010_GPIO_ENABLE, 0); - - tusb_set_power(0); -+static int slot1_cover_open; -+static int slot2_cover_open; -+static struct device *mmc_device; - +- - ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2, - TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS, - TUSB6010_GPIO_INT, TUSB6010_DMACHAN); - if (ret != 0) - goto err; - +- - printk(announce); -+static struct omap2_mcspi_device_config p54spi_mcspi_config = { -+ .turbo_mode = 0, -+ .single_channel = 1, -+}; - +- - return; -+#ifdef CONFIG_MACH_NOKIA_N8X0_LCD -+extern struct mipid_platform_data n8x0_mipid_platform_data; -+#endif - +- -err: - gpio_free(TUSB6010_GPIO_ENABLE); -+#ifdef CONFIG_TOUCHSCREEN_TSC2005 -+static struct tsc2005_platform_data tsc2005_config; -+static void rx51_tsc2005_set_reset(bool enable) -+{ + gpio_set_value(RX51_TSC2005_RESET_GPIO, enable); } -#else - -static void __init n8x0_usb_init(void) {} - --#endif /*CONFIG_USB_TUSB6010 */ - +-#endif /*CONFIG_USB_TUSB6010 */ - + -static struct omap2_mcspi_device_config p54spi_mcspi_config = { +static struct omap2_mcspi_device_config tsc2005_mcspi_config = { .turbo_mode = 0, @@ -315,7 +321,7 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c { .modalias = "p54spi", .bus_num = 2, -@@ -150,8 +201,60 @@ +@@ -150,8 +209,60 @@ .max_speed_hz = 48000000, .controller_data = &p54spi_mcspi_config, }, @@ -376,7 +382,7 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c #if defined(CONFIG_MTD_ONENAND_OMAP2) || \ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) -@@ -184,6 +287,20 @@ +@@ -184,6 +295,20 @@ }, }; @@ -397,7 +403,7 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c static struct omap_onenand_platform_data board_onenand_data = { .cs = 0, .gpio_irq = 26, -@@ -626,6 +743,11 @@ +@@ -626,6 +751,11 @@ static struct i2c_board_info n810_i2c_board_info_2[] __initdata = { { @@ -409,7 +415,7 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c I2C_BOARD_INFO("tlv320aic3x", 0x18), .platform_data = &n810_aic33_data, }, -@@ -657,10 +779,62 @@ +@@ -657,10 +787,62 @@ #define board_mux NULL #endif @@ -472,7 +478,7 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c spi_register_board_info(n800_spi_board_info, ARRAY_SIZE(n800_spi_board_info)); omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1, -@@ -671,6 +845,10 @@ +@@ -671,6 +853,10 @@ ARRAY_SIZE(n810_i2c_board_info_2)); omap_serial_init(); @@ -486,7 +492,7 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0-lcd.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.37/arch/arm/mach-omap2/board-n8x0-lcd.c 2011-01-27 14:17:29.132000007 +0100 ++++ linux-2.6.37/arch/arm/mach-omap2/board-n8x0-lcd.c 2011-01-28 18:10:37.941647955 +0100 @@ -0,0 +1,127 @@ +/* + * linux/arch/arm/mach-omap2/board-n8x0.c @@ -618,7 +624,7 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0-lcd.c Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0-usb.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.37/arch/arm/mach-omap2/board-n8x0-usb.c 2011-01-27 14:17:29.132000007 +0100 ++++ linux-2.6.37/arch/arm/mach-omap2/board-n8x0-usb.c 2011-01-28 18:09:59.378233620 +0100 @@ -0,0 +1,175 @@ +/* + * linux/arch/arm/mach-omap2/board-n8x0-usb.c @@ -797,8 +803,8 @@ Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0-usb.c +} Index: linux-2.6.37/arch/arm/mach-omap2/control.c =================================================================== ---- linux-2.6.37.orig/arch/arm/mach-omap2/control.c 2011-01-27 14:17:04.403000007 +0100 -+++ linux-2.6.37/arch/arm/mach-omap2/control.c 2011-01-27 14:17:29.132000007 +0100 +--- linux-2.6.37.orig/arch/arm/mach-omap2/control.c 2011-01-05 01:50:19.000000000 +0100 ++++ linux-2.6.37/arch/arm/mach-omap2/control.c 2011-01-28 18:09:59.378233620 +0100 @@ -172,6 +172,7 @@ return __raw_readw(OMAP_CTRL_REGADDR(offset)); } @@ -817,8 +823,8 @@ Index: linux-2.6.37/arch/arm/mach-omap2/control.c __raw_writel(val, OMAP_CTRL_REGADDR(offset)); Index: linux-2.6.37/arch/arm/mach-omap2/Kconfig =================================================================== ---- linux-2.6.37.orig/arch/arm/mach-omap2/Kconfig 2011-01-27 14:17:04.391000007 +0100 -+++ linux-2.6.37/arch/arm/mach-omap2/Kconfig 2011-01-27 14:17:29.132000007 +0100 +--- linux-2.6.37.orig/arch/arm/mach-omap2/Kconfig 2011-01-05 01:50:19.000000000 +0100 ++++ linux-2.6.37/arch/arm/mach-omap2/Kconfig 2011-01-28 18:09:59.378233620 +0100 @@ -210,6 +210,16 @@ select MACH_NOKIA_N810 select MACH_NOKIA_N810_WIMAX @@ -838,8 +844,8 @@ Index: linux-2.6.37/arch/arm/mach-omap2/Kconfig depends on ARCH_OMAP3 Index: linux-2.6.37/arch/arm/mach-omap2/Makefile =================================================================== ---- linux-2.6.37.orig/arch/arm/mach-omap2/Makefile 2011-01-27 14:17:04.386000007 +0100 -+++ linux-2.6.37/arch/arm/mach-omap2/Makefile 2011-01-27 14:17:29.132000007 +0100 +--- linux-2.6.37.orig/arch/arm/mach-omap2/Makefile 2011-01-05 01:50:19.000000000 +0100 ++++ linux-2.6.37/arch/arm/mach-omap2/Makefile 2011-01-28 18:09:59.378233620 +0100 @@ -139,6 +139,8 @@ hsmmc.o \ board-flash.o @@ -849,33 +855,3 @@ Index: linux-2.6.37/arch/arm/mach-omap2/Makefile obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ board-rx51-sdram.o \ board-rx51-peripherals.o \ -Index: linux-2.6.37/arch/arm/mach-omap2/serial.c -=================================================================== ---- linux-2.6.37.orig/arch/arm/mach-omap2/serial.c 2011-01-27 14:17:04.398000007 +0100 -+++ linux-2.6.37/arch/arm/mach-omap2/serial.c 2011-01-27 14:17:29.132000007 +0100 -@@ -546,14 +546,17 @@ - uart->padconf = 0; - } - -+#if 1 - uart->irqflags |= IRQF_SHARED; - ret = request_threaded_irq(uart->irq, NULL, omap_uart_interrupt, - IRQF_SHARED, "serial idle", (void *)uart); - WARN_ON(ret); -+#endif - } - - void omap_uart_enable_irqs(int enable) - { -+#if 1 - int ret; - struct omap_uart_state *uart; - -@@ -570,6 +573,7 @@ - free_irq(uart->irq, (void *)uart); - } - } -+#endif - } - - static ssize_t sleep_timeout_show(struct device *dev, diff --git a/target/linux/omap24xx/patches-2.6.37/900-n810-battery-management.patch b/target/linux/omap24xx/patches-2.6.37/900-n810-battery-management.patch index a85eca5..ea33bfd 100644 --- a/target/linux/omap24xx/patches-2.6.37/900-n810-battery-management.patch +++ b/target/linux/omap24xx/patches-2.6.37/900-n810-battery-management.patch @@ -10,10 +10,10 @@ drivers/cbus/tahvo.h | 6 9 files changed, 548 insertions(+), 3 deletions(-) -Index: linux-2.6.37-rc1/drivers/cbus/Kconfig +Index: linux-2.6.37/drivers/cbus/Kconfig =================================================================== ---- linux-2.6.37-rc1.orig/drivers/cbus/Kconfig 2010-11-06 17:28:21.821000000 +0100 -+++ linux-2.6.37-rc1/drivers/cbus/Kconfig 2010-11-06 17:28:21.872000001 +0100 +--- linux-2.6.37.orig/drivers/cbus/Kconfig 2011-01-28 18:14:27.901372343 +0100 ++++ linux-2.6.37/drivers/cbus/Kconfig 2011-01-28 18:14:27.952363634 +0100 @@ -94,4 +94,16 @@ to Retu/Vilma. Detection state and events are exposed through sysfs. @@ -31,10 +31,10 @@ Index: linux-2.6.37-rc1/drivers/cbus/Kconfig + If unsure, say N. + endmenu -Index: linux-2.6.37-rc1/drivers/cbus/Makefile +Index: linux-2.6.37/drivers/cbus/Makefile =================================================================== ---- linux-2.6.37-rc1.orig/drivers/cbus/Makefile 2010-11-06 17:28:21.812000054 +0100 -+++ linux-2.6.37-rc1/drivers/cbus/Makefile 2010-11-06 17:28:21.872000001 +0100 +--- linux-2.6.37.orig/drivers/cbus/Makefile 2011-01-28 18:14:27.891374053 +0100 ++++ linux-2.6.37/drivers/cbus/Makefile 2011-01-28 18:14:27.952363634 +0100 @@ -12,3 +12,6 @@ obj-$(CONFIG_CBUS_TAHVO_USER) += tahvo-user.o obj-$(CONFIG_CBUS_RETU_USER) += retu-user.o @@ -42,10 +42,10 @@ Index: linux-2.6.37-rc1/drivers/cbus/Makefile +n810bm-y += n810bm_main.o +n810bm-y += lipocharge.o +obj-$(CONFIG_N810BM) += n810bm.o -Index: linux-2.6.37-rc1/drivers/cbus/n810bm_main.c +Index: linux-2.6.37/drivers/cbus/n810bm_main.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.37-rc1/drivers/cbus/n810bm_main.c 2010-11-06 17:28:21.872000001 +0100 ++++ linux-2.6.37/drivers/cbus/n810bm_main.c 2011-01-28 18:14:27.952363634 +0100 @@ -0,0 +1,397 @@ +/* + * Nokia n810 battery management @@ -444,10 +444,10 @@ Index: linux-2.6.37-rc1/drivers/cbus/n810bm_main.c +MODULE_DESCRIPTION("Nokia n810 battery management"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Michael Buesch"); -Index: linux-2.6.37-rc1/drivers/cbus/retu.c +Index: linux-2.6.37/drivers/cbus/retu.c =================================================================== ---- linux-2.6.37-rc1.orig/drivers/cbus/retu.c 2010-11-06 17:28:21.812000054 +0100 -+++ linux-2.6.37-rc1/drivers/cbus/retu.c 2010-11-06 17:28:21.872000001 +0100 +--- linux-2.6.37.orig/drivers/cbus/retu.c 2011-01-28 18:14:27.892373882 +0100 ++++ linux-2.6.37/drivers/cbus/retu.c 2011-01-28 18:14:27.952363634 +0100 @@ -85,10 +85,10 @@ * * This function writes a value to the specified register @@ -461,10 +461,10 @@ Index: linux-2.6.37-rc1/drivers/cbus/retu.c } void retu_set_clear_reg_bits(int reg, u16 set, u16 clear) -Index: linux-2.6.37-rc1/drivers/cbus/retu.h +Index: linux-2.6.37/drivers/cbus/retu.h =================================================================== ---- linux-2.6.37-rc1.orig/drivers/cbus/retu.h 2010-11-06 17:28:21.812000054 +0100 -+++ linux-2.6.37-rc1/drivers/cbus/retu.h 2010-11-06 17:28:21.872000001 +0100 +--- linux-2.6.37.orig/drivers/cbus/retu.h 2011-01-28 18:14:27.892373882 +0100 ++++ linux-2.6.37/drivers/cbus/retu.h 2011-01-28 18:14:27.953363463 +0100 @@ -39,6 +39,7 @@ #define RETU_REG_CC2 0x0e /* Common control register 2 */ #define RETU_REG_CTRL_CLR 0x0f /* Regulator clear register */ @@ -482,11 +482,11 @@ Index: linux-2.6.37-rc1/drivers/cbus/retu.h void retu_set_clear_reg_bits(int reg, u16 set, u16 clear); int retu_read_adc(int channel); int retu_request_irq(int id, void *irq_handler, unsigned long arg, char *name); -Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c +Index: linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c =================================================================== ---- linux-2.6.37-rc1.orig/arch/arm/mach-omap2/board-n8x0.c 2010-11-06 17:28:21.796000362 +0100 -+++ linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c 2010-11-06 17:28:21.873000001 +0100 -@@ -899,6 +899,17 @@ +--- linux-2.6.37.orig/arch/arm/mach-omap2/board-n8x0.c 2011-01-28 18:14:27.876376613 +0100 ++++ linux-2.6.37/arch/arm/mach-omap2/board-n8x0.c 2011-01-28 18:14:27.953363463 +0100 +@@ -907,6 +907,17 @@ ARRAY_SIZE(n8x0_gpio_switches)); } @@ -504,7 +504,7 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c static void __init n8x0_init_machine(void) { omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC); -@@ -925,6 +936,8 @@ +@@ -933,6 +944,8 @@ n8x0_onenand_init(); n8x0_mmc_init(); n8x0_usb_init(); @@ -513,10 +513,10 @@ Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c } MACHINE_START(NOKIA_N800, "Nokia N800") -Index: linux-2.6.37-rc1/drivers/cbus/lipocharge.c +Index: linux-2.6.37/drivers/cbus/lipocharge.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.37-rc1/drivers/cbus/lipocharge.c 2010-11-06 17:28:21.873000001 +0100 ++++ linux-2.6.37/drivers/cbus/lipocharge.c 2011-01-28 18:14:27.953363463 +0100 @@ -0,0 +1,63 @@ +/* + * Generic LIPO battery charger @@ -581,10 +581,10 @@ Index: linux-2.6.37-rc1/drivers/cbus/lipocharge.c + del_timer_sync(&c->timer); + //TODO +} -Index: linux-2.6.37-rc1/drivers/cbus/lipocharge.h +Index: linux-2.6.37/drivers/cbus/lipocharge.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.37-rc1/drivers/cbus/lipocharge.h 2010-11-06 17:28:21.873000001 +0100 ++++ linux-2.6.37/drivers/cbus/lipocharge.h 2011-01-28 18:14:27.953363463 +0100 @@ -0,0 +1,50 @@ +#ifndef LIPOCHARGE_H_ +#define LIPOCHARGE_H_ @@ -636,10 +636,10 @@ Index: linux-2.6.37-rc1/drivers/cbus/lipocharge.h +void lipocharge_stop(struct lipocharge *c); + +#endif /* LIPOCHARGE_H_ */ -Index: linux-2.6.37-rc1/drivers/cbus/tahvo.h +Index: linux-2.6.37/drivers/cbus/tahvo.h =================================================================== ---- linux-2.6.37-rc1.orig/drivers/cbus/tahvo.h 2010-11-06 17:28:21.813000041 +0100 -+++ linux-2.6.37-rc1/drivers/cbus/tahvo.h 2010-11-06 17:28:21.873000001 +0100 +--- linux-2.6.37.orig/drivers/cbus/tahvo.h 2011-01-28 18:14:27.893373711 +0100 ++++ linux-2.6.37/drivers/cbus/tahvo.h 2011-01-28 18:14:27.953363463 +0100 @@ -30,8 +30,14 @@ #define TAHVO_REG_IDR 0x01 /* Interrupt ID */ #define TAHVO_REG_IDSR 0x02 /* Interrupt status */ |