summaryrefslogtreecommitdiff
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds4
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/dts/RE6500.dts115
-rw-r--r--target/linux/ramips/image/Makefile6
-rw-r--r--target/linux/ramips/mt7621/profiles/linksys.mk16
8 files changed, 148 insertions, 1 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index a5a8400..545bd70 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -212,6 +212,10 @@ case $board in
wnce2001)
set_wifi_led "netgear:green:wlan"
;;
+ re6500)
+ ucidef_set_led_default "power" "power" "linksys:white:power" "1"
+ ucidef_set_led_default "wifi" "wifi" "linksys:orange:wifi" "1"
+ ;;
rt-n14u)
ucidef_set_led_default "power" "power" "asus:blue:power" "1"
ucidef_set_led_netdev "lan" "lan" "asus:blue:lan" eth0.1
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 4849238..bc1fc01 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -104,6 +104,7 @@ ramips_setup_interfaces()
ucidef_add_switch_vlan "switch0" "2" "0 9t"
;;
+ re6500 | \
asl26555)
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "switch0" "1" "1"
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 8bcc532..e695778 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -132,6 +132,9 @@ get_status_led() {
px4885)
status_led="7links:orange:wifi"
;;
+ re6500)
+ status_led="linksys:orange:wifi"
+ ;;
rt-n15)
status_led="rt-n15:blue:power"
;;
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 2d00716..d2a1856 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -208,6 +208,9 @@ ramips_board_detect() {
*"Linksys E1700")
name="e1700"
;;
+ *"Linksys RE6500")
+ name="re6500"
+ ;;
*"Planex MZK-750DHP")
name="mzk-750dhp"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index f3e8ed5..cedd62b 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -80,6 +80,7 @@ platform_check_image() {
olinuxino-rt5350f-evb | \
psr-680w | \
px4885 | \
+ re6500 | \
rp-n53 | \
rt-g32-b1 | \
rt-n10-plus | \
diff --git a/target/linux/ramips/dts/RE6500.dts b/target/linux/ramips/dts/RE6500.dts
new file mode 100644
index 0000000..0c33994
--- /dev/null
+++ b/target/linux/ramips/dts/RE6500.dts
@@ -0,0 +1,115 @@
+/dts-v1/;
+
+/include/ "mt7621.dtsi"
+
+/ {
+ compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+ model = "Linksys RE6500";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ palmbus@1E000000 {
+ spi@b00 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mx25l6405d";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "en25q64";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uart2", "uart3", "rgmii2";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ pcie@1e140000 {
+ status = "okay";
+
+ pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+
+ pcie1 {
+ mt76@1,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ mediatek,5ghz = <0>;
+ };
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ wifi {
+ label = "linksys:orange:wifi";
+ gpios = <&gpio0 0 1>;
+ };
+ power {
+ label = "linksys:white:power";
+ gpios = <&gpio0 9 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ wps {
+ label = "wps";
+ gpios = <&gpio0 10 1>;
+ linux,code = <0x211>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&gpio0 11 0>;
+ linux,code = <0x198>;
+ };
+ };
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 0c455c2..776920b 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -921,7 +921,7 @@ endif
#
ifeq ($(SUBTARGET),mt7621)
- TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1
+ TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500
endif
define Device/mt7621
@@ -933,6 +933,10 @@ define Device/wsr-600
DTS := WSR-600
endef
+define Device/re6500
+ DTS := RE6500
+endef
+
define Device/wsr-1166
DTS := WSR-1166
IMAGE/sysupgrade.bin := trx | pad-rootfs
diff --git a/target/linux/ramips/mt7621/profiles/linksys.mk b/target/linux/ramips/mt7621/profiles/linksys.mk
new file mode 100644
index 0000000..7d48008
--- /dev/null
+++ b/target/linux/ramips/mt7621/profiles/linksys.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/RE6500
+ NAME:=Linksys RE6500
+ PACKAGES:= kmod-mt76
+endef
+
+define Profile/RE6500/Description
+ Package set compatible with the Linksys RE6500 board.
+endef
+$(eval $(call Profile,RE6500))