diff options
Diffstat (limited to 'target')
| -rw-r--r-- | target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-rango.dts | 84 |
1 files changed, 40 insertions, 44 deletions
diff --git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-rango.dts b/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-rango.dts index faac0b7..804ba0d 100644 --- a/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-rango.dts +++ b/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-rango.dts @@ -95,16 +95,6 @@ reg = <0x1>; }; - wlan_2g@2 { - label = "rango:white:wlan_2g"; - reg = <0x2>; - }; - - wlan_5g@3 { - label = "rango:white:wlan_5g"; - reg = <0x3>; - }; - usb2@5 { label = "rango:white:usb2"; reg = <0x5>; @@ -173,16 +163,6 @@ status = "okay"; }; - sdhci@d8000 { - pinctrl-names = "default"; - pinctrl-0 = <&sdhci_pins>; - no-1-8-v; - broken-cd; - wp-inverted; - bus-width = <8>; - status = "okay"; - }; - /* USB part of the eSATA/USB 2.0 port */ usb@58000 { status = "okay"; @@ -315,14 +295,14 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>; + gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; }; gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; - pinctrl-0 = <&keys_pin>; + pinctrl-0 = <&reset_key_pin &wps_key_pin>; pinctrl-names = "default"; button@1 { @@ -340,18 +320,29 @@ gpio-leds { compatible = "gpio-leds"; - pinctrl-0 = <&power_led_pin &sata_led_pin>; + pinctrl-0 = <&power_led_pin &sata_led_pin &wlan_2g_led_pin &wlan_5g_led_pin>; pinctrl-names = "default"; + sata { + label = "rango:white:sata"; + gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + }; + + wlan_2g { + label = "rango:white:wlan_2g"; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + }; + + wlan_5g { + label = "rango:white:wlan_5g"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + power { + label = "rango:white:power"; gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - - sata { - gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; }; dsa@0 { @@ -399,16 +390,6 @@ }; }; - gpio-leds { - power { - label = "rango:white:power"; - }; - - sata { - label = "rango:white:sata"; - }; - }; - mvsw61xx { #address-cells = <1>; #size-cells = <0>; @@ -424,18 +405,28 @@ }; &pinctrl { - keys_pin: keys-pin { - marvell,pins = "mpp24", "mpp29"; + sata_led_pin: sata-led-pin { + marvell,pins = "mpp21"; marvell,function = "gpio"; }; - power_led_pin: power-led-pin { - marvell,pins = "mpp56"; + wps_key_pin: wps-key-pin { + marvell,pins = "mpp24"; marvell,function = "gpio"; }; - sata_led_pin: sata-led-pin { - marvell,pins = "mpp21"; + reset_key_pin: reset-key-pin { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + wlan_2g_led_pin: wlan-2g-led-pin { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + wlan_5g_led_pin: wlan-5g-led-pin { + marvell,pins = "mpp46"; marvell,function = "gpio"; }; @@ -443,4 +434,9 @@ marvell,pins = "mpp47"; marvell,function = "gpio"; }; + + power_led_pin: power-led-pin { + marvell,pins = "mpp56"; + marvell,function = "gpio"; + }; }; |