diff options
Diffstat (limited to 'target')
14 files changed, 120 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 95f608a..2d351d6 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -81,6 +81,9 @@ get_status_led() { v22rw-2x2) status_led="v22rw-2x2:green:security" ;; + w306r-v20) + status_led="w306r:green:sys" + ;; w502u) status_led="alfa:blue:wps" ;; diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 62788cd..34821ec 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -65,6 +65,7 @@ case "$FIRMWARE" in sl-r7205 | \ v11st-fe | \ v22rw-2x2 | \ + w306r-v20 | \ w502u | \ wcr-150gn | \ whr-g300n | \ diff --git a/target/linux/ramips/base-files/etc/uci-defaults/leds b/target/linux/ramips/base-files/etc/uci-defaults/leds index d8f3c0c..ba6ea60 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/leds +++ b/target/linux/ramips/base-files/etc/uci-defaults/leds @@ -66,6 +66,9 @@ case $board in v11st-fe) set_wifi_led "rt2800pci-phy0::radio" ;; + w306r-v20) + set_wifi_led "rt2800pci-phy0::radio" + ;; w502u) set_usb_led "alfa:blue:usb" set_wifi_led "rt2800pci-phy0::radio" diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network index dc2221f..81c12de 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/network +++ b/target/linux/ramips/base-files/etc/uci-defaults/network @@ -55,6 +55,7 @@ ramips_setup_interfaces() ;; freestation5 | \ + w306r-v20 | \ wcr-150gn) ucidef_set_interfaces_lan_wan "eth0.2" "eth0.1" ;; @@ -96,6 +97,11 @@ ramips_setup_macs() wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1) ;; + w306r-v20) + lan_mac=$(ramips_get_mac_binary factory 4) + wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 5) + ;; + dir-300-b1 |\ dir-300-b2 |\ dir-600-b1) diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac index f523d69..bd5de41 100644 --- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac +++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac @@ -28,6 +28,7 @@ preinit_set_mac_address() { hw550-3g |\ nbg-419n |\ omni-emb |\ + w306r-v20 |\ w502u |\ wl-330n |\ wr6202 |\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 1298ebd..045d952 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -134,6 +134,9 @@ ramips_board_name() { *"Sitecom WL-351 v1 002") name="wl-351" ;; + *"Tenda W306R V2.0") + name="w306r-v20" + ;; *"Ralink V11ST-FE") name="v11st-fe" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 7f500d9..faa82ec 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -32,6 +32,7 @@ platform_check_image() { rt-n15 | \ rt-n56u | \ sl-r7205 | \ + w306r-v20 |\ w502u |\ wr6202 |\ v22rw-2x2 | \ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h index c2ec146..08b04f9 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h @@ -45,6 +45,7 @@ enum ramips_mach_type { RAMIPS_MACH_PWH2004, /* Prolink 2004H / Abocom 5205 */ RAMIPS_MACH_SL_R7205, /* Skylink SL-R7205 Wireless 3G Router*/ RAMIPS_MACH_V22RW_2X2, /* Ralink AP-RT3052-V22RW-2X2 */ + RAMIPS_MACH_W306R_V20, /* Tenda W306R_V20 */ RAMIPS_MACH_W502U, /* ALFA Networks W502U */ RAMIPS_MACH_WCR150GN, /* Sparklan WCR-150GN */ RAMIPS_MACH_WHR_G300N, /* Buffalo WHR-G300N */ diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig index ef4ddf4..b9850a6 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig @@ -104,6 +104,11 @@ config RT305X_MACH_V22RW_2X2 select RALINK_DEV_GPIO_BUTTONS select RALINK_DEV_GPIO_LEDS +config RT305X_MACH_W306R_V20 + bool "Tenda W306R V2.0 board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + config RT305X_MACH_WL341V3 bool "Sitecom WL-341 v3 board support" select RALINK_DEV_GPIO_BUTTONS diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile index 0336936..f5c6aa8 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_RT305X_MACH_RT_G32_REVB) += mach-rt-g32-revb.o obj-$(CONFIG_RT305X_MACH_RT_N10_PLUS) += mach-rt-n10-plus.o obj-$(CONFIG_RT305X_MACH_SL_R7205) += mach-sl-r7205.o obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o +obj-$(CONFIG_RT305X_MACH_W306R_V20) += mach-w306r-v20.o obj-$(CONFIG_RT305X_MACH_W502U) += mach-w502u.o obj-$(CONFIG_RT305X_MACH_WCR150GN) += mach-wcr150gn.o obj-$(CONFIG_RT305X_MACH_WHR_G300N) += mach-whr-g300n.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w306r-v20.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w306r-v20.c new file mode 100644 index 0000000..6235a73 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w306r-v20.c @@ -0,0 +1,72 @@ +/* + * Tenda W306R V2.0 board support + * + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ethtool.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +#define W306R_V20_GPIO_LED_SYS 9 /* FIXME */ +#define W306R_V20_GPIO_LED_WPS 13 + +#define W306R_V20_GPIO_BUTTON_RESET 10 + +#define W306R_V20_KEYS_POLL_INTERVAL 20 +#define W306R_V20_KEYS_DEBOUNCE_INTERVAL (3 * W306R_V20_KEYS_POLL_INTERVAL) + +static struct gpio_led w306r_v20_leds_gpio[] __initdata = { + { + .name = "w306r-v20:green:sys", + .gpio = W306R_V20_GPIO_LED_SYS, + .active_low = 1, + }, { + .name = "w306r-v20:green:wps", + .gpio = W306R_V20_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button w306r_v20_gpio_buttons[] __initdata = { + { + .desc = "RESET/WPS", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = W306R_V20_KEYS_DEBOUNCE_INTERVAL, + .gpio = W306R_V20_GPIO_BUTTON_RESET, + .active_low = 1, + } +}; + +static void __init w306r_v20_init(void) +{ + rt305x_register_flash(0); + + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(w306r_v20_leds_gpio), + w306r_v20_leds_gpio); + ramips_register_gpio_buttons(-1, W306R_V20_KEYS_POLL_INTERVAL, + ARRAY_SIZE(w306r_v20_gpio_buttons), + w306r_v20_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_W306R_V20, "W306R_V20", "Tenda W306R V2.0", + w306r_v20_init); diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 0c37f7e..aac9ad2 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -371,6 +371,10 @@ define Image/Build/Profile/V22RW2X2 $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,v22rw-2x2,V22RW-2X2,ttyS1,57600,phys) endef +define Image/Build/Profile/W306R_V20 + $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,w306r-v20,W306R_V20,ttyS1,57600,phys) +endef + define Image/Build/Profile/W502U $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,w502u,W502U,ttyS1,115200,phys) endef @@ -428,6 +432,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/RTG32B1,$(1)) $(call Image/Build/Profile/SLR7205,$(1)) $(call Image/Build/Profile/V22RW2X2,$(1)) + $(call Image/Build/Profile/W306R_V20,$(1)) $(call Image/Build/Profile/W502U,$(1)) $(call Image/Build/Profile/WCR150GN,$(1)) $(call Image/Build/Profile/WHRG300N,$(1)) diff --git a/target/linux/ramips/rt305x/config-3.2 b/target/linux/ramips/rt305x/config-3.2 index c814638..5f3a214 100644 --- a/target/linux/ramips/rt305x/config-3.2 +++ b/target/linux/ramips/rt305x/config-3.2 @@ -111,6 +111,7 @@ CONFIG_RT305X_MACH_RT_G32_REVB=y CONFIG_RT305X_MACH_RT_N10_PLUS=y CONFIG_RT305X_MACH_SL_R7205=y CONFIG_RT305X_MACH_V22RW_2X2=y +CONFIG_RT305X_MACH_W306R_V20=y CONFIG_RT305X_MACH_W502U=y CONFIG_RT305X_MACH_WCR150GN=y CONFIG_RT305X_MACH_WHR_G300N=y diff --git a/target/linux/ramips/rt305x/profiles/tenda.mk b/target/linux/ramips/rt305x/profiles/tenda.mk new file mode 100644 index 0000000..5e45b5f --- /dev/null +++ b/target/linux/ramips/rt305x/profiles/tenda.mk @@ -0,0 +1,17 @@ +# +# Copyright (C) 2012 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/W306R_V20 + NAME:=Tenda W306R V2.0 + PACKAGES:= +endef + +define Profile/W306R_V20/Description + Package set for Tenda W306R V2.0 board +endef + +$(eval $(call Profile,W306R_V20)) |