diff options
Diffstat (limited to 'target')
-rw-r--r-- | target/linux/ipq806x/config-4.1 (renamed from target/linux/ipq806x/config-4.0) | 23 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.0/001-spi-qup-Add-DMA-capabilities.patch | 522 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.0/002-v3-spi-qup-Fix-incorrect-block-transfers.patch | 376 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.0/003-spi-qup-Ensure-done-detection.patch | 56 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.0/011-watchdog-qcom-use-timer-devicetree-binding.patch | 67 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.0/012-ARM-qcom-add-description-of-KPSS-WDT-for-IPQ8064.patch | 48 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.0/013-ARM-msm-add-watchdog-entries-to-DT-timer-binding-doc.patch | 50 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.0/121-mfd-qcom_rpm-Add-support-for-IPQ8064.patch | 71 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.0/123-mfd-devicetree-qcom_rpm-Document-IPQ8064-resources.patch | 42 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.0/706-net-stmmac-create-one-debugfs-dir-per-net-device.patch | 175 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/020-add-ap148-bootargs.patch (renamed from target/linux/ipq806x/patches-4.0/020-add-ap148-bootargs.patch) | 18 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/021-add-ap148-partitions.patch (renamed from target/linux/ipq806x/patches-4.0/021-add-ap148-partitions.patch) | 0 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/022-add-db149-dts.patch (renamed from target/linux/ipq806x/patches-4.0/022-add-db149-dts.patch) | 2 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch (renamed from target/linux/ipq806x/patches-4.0/023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch) | 6 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch (renamed from target/linux/ipq806x/patches-4.0/110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch) | 0 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch (renamed from target/linux/ipq806x/patches-4.0/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch) | 14 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch (renamed from target/linux/ipq806x/patches-4.0/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch) | 10 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/113-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch (renamed from target/linux/ipq806x/patches-4.0/113-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch) | 0 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/126-add-rpm-to-ipq8064-dts.patch (renamed from target/linux/ipq806x/patches-4.0/126-add-rpm-to-ipq8064-dts.patch) | 12 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/133-ARM-Add-Krait-L2-register-accessor-functions.patch (renamed from target/linux/ipq806x/patches-4.0/133-ARM-Add-Krait-L2-register-accessor-functions.patch) | 0 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/134-clk-mux-Split-out-register-accessors-for-reuse.patch (renamed from target/linux/ipq806x/patches-4.0/134-clk-mux-Split-out-register-accessors-for-reuse.patch) | 0 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/135-clk-Avoid-sending-high-rates-to-downstream-clocks-during-set_rate.patch (renamed from target/linux/ipq806x/patches-4.0/135-clk-Avoid-sending-high-rates-to-downstream-clocks-during-set_rate.patch) | 14 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/136-clk-Add-safe-switch-hook.patch (renamed from target/linux/ipq806x/patches-4.0/136-clk-Add-safe-switch-hook.patch) | 14 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/137-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch (renamed from target/linux/ipq806x/patches-4.0/137-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch) | 0 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/138-clk-qcom-Add-HFPLL-driver.patch (renamed from target/linux/ipq806x/patches-4.0/138-clk-qcom-Add-HFPLL-driver.patch) | 4 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/139-clk-qcom-Add-IPQ806X-s-HFPLLs.patch (renamed from target/linux/ipq806x/patches-4.0/139-clk-qcom-Add-IPQ806X-s-HFPLLs.patch) | 6 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/140-clk-qcom-Add-support-for-Krait-clocks.patch (renamed from target/linux/ipq806x/patches-4.0/140-clk-qcom-Add-support-for-Krait-clocks.patch) | 2 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/141-clk-qcom-Add-KPSS-ACC-GCC-driver.patch (renamed from target/linux/ipq806x/patches-4.0/141-clk-qcom-Add-KPSS-ACC-GCC-driver.patch) | 4 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/142-clk-qcom-Add-Krait-clock-controller-driver.patch (renamed from target/linux/ipq806x/patches-4.0/142-clk-qcom-Add-Krait-clock-controller-driver.patch) | 4 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/143-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch (renamed from target/linux/ipq806x/patches-4.0/143-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch) | 4 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch (renamed from target/linux/ipq806x/patches-4.0/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch) | 8 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/145-cpufreq-Add-a-cpufreq-krait-based-on-cpufre.patch (renamed from target/linux/ipq806x/patches-4.0/145-cpufreq-Add-a-cpufreq-krait-based-on-cpufre.patch) | 0 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/300-arch-arm-force-ZRELADDR-on-arch-qcom.patch (renamed from target/linux/ipq806x/patches-4.0/300-arch-arm-force-ZRELADDR-on-arch-qcom.patch) | 4 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/700-clk-qcom-Add-support-for-NSS-GMAC-clocks-and-resets.patch (renamed from target/linux/ipq806x/patches-4.0/700-clk-qcom-Add-support-for-NSS-GMAC-clocks-and-resets.patch) | 67 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/701-stmmac-add-phy-handle-support-to-the-platform-layer.patch (renamed from target/linux/ipq806x/patches-4.0/701-stmmac-add-phy-handle-support-to-the-platform-layer.patch) | 4 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/702-stmmac-move-error-path-at-the-end-of-stmmac_probe_co.patch (renamed from target/linux/ipq806x/patches-4.0/702-stmmac-move-error-path-at-the-end-of-stmmac_probe_co.patch) | 6 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/703-stmmac-add-fixed-link-device-tree-support.patch (renamed from target/linux/ipq806x/patches-4.0/703-stmmac-add-fixed-link-device-tree-support.patch) | 6 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/704-stmmac-add-ipq806x-glue-layer.patch (renamed from target/linux/ipq806x/patches-4.0/704-stmmac-add-ipq806x-glue-layer.patch) | 2 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/705-net-stmmac-ipq806x-document-device-tree-bindings.patch (renamed from target/linux/ipq806x/patches-4.0/705-net-stmmac-ipq806x-document-device-tree-bindings.patch) | 0 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch (renamed from target/linux/ipq806x/patches-4.0/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch) | 0 | ||||
-rw-r--r-- | target/linux/ipq806x/patches-4.1/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch (renamed from target/linux/ipq806x/patches-4.0/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch) | 6 |
41 files changed, 127 insertions, 1520 deletions
diff --git a/target/linux/ipq806x/config-4.0 b/target/linux/ipq806x/config-4.1 index 7ec3963..e80b632 100644 --- a/target/linux/ipq806x/config-4.0 +++ b/target/linux/ipq806x/config-4.1 @@ -4,8 +4,9 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_APQ_GCC_8084=y CONFIG_APQ_MMCC_8084=y CONFIG_AR8216_PHY=y -CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +# CONFIG_ARCH_ALPINE is not set CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y CONFIG_ARCH_HAS_SG_CHAIN=y CONFIG_ARCH_HAS_TICK_BROADCAST=y @@ -38,6 +39,10 @@ CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ARCH_TIMER=y CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y # CONFIG_ARM_ATAG_DTB_COMPAT is not set +CONFIG_ARM_CCI=y +CONFIG_ARM_CCI400_COMMON=y +CONFIG_ARM_CCI400_PMU=y +# CONFIG_ARM_CPUIDLE is not set CONFIG_ARM_CPU_SUSPEND=y CONFIG_ARM_GIC=y CONFIG_ARM_HAS_SG_CHAIN=y @@ -107,8 +112,6 @@ CONFIG_CRC16=y # CONFIG_CRC32_SARWATE is not set CONFIG_CRC32_SLICEBY8=y CONFIG_CROSS_MEMORY_ATTACH=y -# CONFIG_CRYPTO_SHA1_ARM_NEON is not set -# CONFIG_CRYPTO_SHA512_ARM_NEON is not set CONFIG_CRYPTO_XZ=y CONFIG_DCACHE_WORD_ACCESS=y CONFIG_DEBUG_BUGVERBOSE=y @@ -124,7 +127,6 @@ CONFIG_DMA_ENGINE=y CONFIG_DMA_OF=y CONFIG_DMA_VIRTUAL_CHANNELS=y CONFIG_DTC=y -# CONFIG_DW_DMAC_CORE is not set # CONFIG_DW_DMAC_PCI is not set CONFIG_DYNAMIC_DEBUG=y CONFIG_ETHERNET_PACKET_MANGLE=y @@ -134,11 +136,11 @@ CONFIG_GENERIC_ALLOCATOR=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_GENERIC_CPUFREQ_KRAIT=y CONFIG_GENERIC_IDLE_POLL_SETUP=y CONFIG_GENERIC_IO=y CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y CONFIG_GENERIC_MSI_IRQ=y CONFIG_GENERIC_PCI_IOMAP=y CONFIG_GENERIC_PHY=y @@ -147,6 +149,7 @@ CONFIG_GENERIC_SCHED_CLOCK=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GPIOLIB=y CONFIG_GPIOLIB_IRQCHIP=y CONFIG_GPIO_DEVRES=y @@ -208,6 +211,7 @@ CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y CONFIG_HIGHMEM=y CONFIG_HIGHPTE=y CONFIG_HOTPLUG_CPU=y +# CONFIG_HSU_DMA_PCI is not set CONFIG_HWMON=y CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_MSM=y @@ -254,6 +258,7 @@ CONFIG_MIGHT_HAVE_PCI=y CONFIG_MIGRATION=y CONFIG_MODULES_USE_ELF_REL=y CONFIG_MSM_GCC_8660=y +# CONFIG_MSM_GCC_8916 is not set CONFIG_MSM_GCC_8960=y CONFIG_MSM_GCC_8974=y # CONFIG_MSM_LCC_8960 is not set @@ -296,6 +301,7 @@ CONFIG_PCI=y CONFIG_PCIEAER=y CONFIG_PCIEPORTBUS=y CONFIG_PCIE_DW=y +# CONFIG_PCIE_IPROC is not set CONFIG_PCIE_PME=y CONFIG_PCIE_QCOM=y CONFIG_PCI_DEBUG=y @@ -304,10 +310,13 @@ CONFIG_PCI_DOMAINS_GENERIC=y CONFIG_PCI_MSI=y CONFIG_PERF_EVENTS=y CONFIG_PERF_USE_VMALLOC=y +CONFIG_PGTABLE_LEVELS=2 CONFIG_PHYLIB=y # CONFIG_PHY_QCOM_APQ8064_SATA is not set CONFIG_PHY_QCOM_IPQ806X_SATA=y +# CONFIG_PHY_QCOM_UFS is not set CONFIG_PINCTRL=y +# CONFIG_PINCTRL_AMD is not set CONFIG_PINCTRL_APQ8064=y # CONFIG_PINCTRL_APQ8084 is not set CONFIG_PINCTRL_IPQ8064=y @@ -330,6 +339,7 @@ CONFIG_POWER_RESET=y # CONFIG_POWER_RESET_LTC2952 is not set CONFIG_POWER_RESET_MSM=y # CONFIG_POWER_RESET_SYSCON is not set +# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set CONFIG_POWER_SUPPLY=y CONFIG_PREEMPT=y CONFIG_PREEMPT_COUNT=y @@ -342,9 +352,11 @@ CONFIG_QCOM_GSBI=y CONFIG_QCOM_HFPLL=y CONFIG_QCOM_SCM=y CONFIG_QCOM_WDT=y +# CONFIG_QORIQ_CPUFREQ is not set CONFIG_RAS=y # CONFIG_RCU_BOOST is not set CONFIG_RCU_CPU_STALL_TIMEOUT=21 +# CONFIG_RCU_EXPEDITE_BOOT is not set CONFIG_RCU_STALL_COMMON=y CONFIG_RD_GZIP=y CONFIG_REGMAP=y @@ -405,6 +417,7 @@ CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" CONFIG_UNINLINE_SPIN_UNLOCK=y CONFIG_USB_SUPPORT=y CONFIG_USE_OF=y +CONFIG_VDSO=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_VFP=y CONFIG_VFPv3=y diff --git a/target/linux/ipq806x/patches-4.0/001-spi-qup-Add-DMA-capabilities.patch b/target/linux/ipq806x/patches-4.0/001-spi-qup-Add-DMA-capabilities.patch deleted file mode 100644 index a500c67..0000000 --- a/target/linux/ipq806x/patches-4.0/001-spi-qup-Add-DMA-capabilities.patch +++ /dev/null @@ -1,522 +0,0 @@ -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: spi: qup: Add DMA capabilities -From: Andy Gross <agross@codeaurora.org> -X-Patchwork-Id: 4432401 -Message-Id: <1403816781-31008-1-git-send-email-agross@codeaurora.org> -To: Mark Brown <broonie@kernel.org> -Cc: linux-spi@vger.kernel.org, Sagar Dharia <sdharia@codeaurora.org>, - Daniel Sneddon <dsneddon@codeaurora.org>, - Bjorn Andersson <bjorn.andersson@sonymobile.com>, - "Ivan T. Ivanov" <iivanov@mm-sol.com>, - linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, - linux-arm-msm@vger.kernel.org, Andy Gross <agross@codeaurora.org> -Date: Thu, 26 Jun 2014 16:06:21 -0500 - -This patch adds DMA capabilities to the spi-qup driver. If DMA channels are -present, the QUP will use DMA instead of block mode for transfers to/from SPI -peripherals for transactions larger than the length of a block. - -Signed-off-by: Andy Gross <agross@codeaurora.org> - ---- -.../devicetree/bindings/spi/qcom,spi-qup.txt | 10 + - drivers/spi/spi-qup.c | 361 ++++++++++++++++++-- - 2 files changed, 350 insertions(+), 21 deletions(-) - ---- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt -+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt -@@ -27,6 +27,11 @@ Optional properties: - - spi-max-frequency: Specifies maximum SPI clock frequency, - Units - Hz. Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt -+- dmas : Two DMA channel specifiers following the convention outlined -+ in bindings/dma/dma.txt -+- dma-names: Names for the dma channels, if present. There must be at -+ least one channel named "tx" for transmit and named "rx" for -+ receive. - - num-cs: total number of chipselects - - cs-gpios: should specify GPIOs used for chipselects. - The gpios will be referred to as reg = <index> in the SPI child -@@ -51,6 +56,10 @@ Example: - clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - -+ dmas = <&blsp2_bam 2>, -+ <&blsp2_bam 3>; -+ dma-names = "rx", "tx"; -+ - pinctrl-names = "default"; - pinctrl-0 = <&spi8_default>; - ---- a/drivers/spi/spi-qup.c -+++ b/drivers/spi/spi-qup.c -@@ -22,6 +22,8 @@ - #include <linux/platform_device.h> - #include <linux/pm_runtime.h> - #include <linux/spi/spi.h> -+#include <linux/dmaengine.h> -+#include <linux/dma-mapping.h> - - #define QUP_CONFIG 0x0000 - #define QUP_STATE 0x0004 -@@ -116,6 +118,8 @@ - - #define SPI_NUM_CHIPSELECTS 4 - -+#define SPI_MAX_XFER (SZ_64K - 64) -+ - /* high speed mode is when bus rate is greater then 26MHz */ - #define SPI_HS_MIN_RATE 26000000 - #define SPI_MAX_RATE 50000000 -@@ -143,6 +147,17 @@ struct spi_qup { - int tx_bytes; - int rx_bytes; - int qup_v1; -+ -+ int use_dma; -+ -+ struct dma_chan *rx_chan; -+ struct dma_slave_config rx_conf; -+ struct dma_chan *tx_chan; -+ struct dma_slave_config tx_conf; -+ dma_addr_t rx_dma; -+ dma_addr_t tx_dma; -+ void *dummy; -+ atomic_t dma_outstanding; - }; - - -@@ -266,6 +281,221 @@ static void spi_qup_fifo_write(struct sp - } - } - -+static void qup_dma_callback(void *data) -+{ -+ struct spi_qup *controller = data; -+ -+ if (atomic_dec_and_test(&controller->dma_outstanding)) -+ complete(&controller->done); -+} -+ -+static int spi_qup_do_dma(struct spi_qup *controller, struct spi_transfer *xfer) -+{ -+ struct dma_async_tx_descriptor *rxd, *txd; -+ dma_cookie_t rx_cookie, tx_cookie; -+ u32 xfer_len, rx_align = 0, tx_align = 0, n_words; -+ struct scatterlist tx_sg[2], rx_sg[2]; -+ int ret = 0; -+ u32 bytes_to_xfer = xfer->len; -+ u32 offset = 0; -+ u32 rx_nents = 0, tx_nents = 0; -+ dma_addr_t rx_dma = 0, tx_dma = 0, rx_dummy_dma = 0, tx_dummy_dma = 0; -+ -+ -+ if (xfer->rx_buf) { -+ rx_dma = dma_map_single(controller->dev, xfer->rx_buf, -+ xfer->len, DMA_FROM_DEVICE); -+ -+ if (dma_mapping_error(controller->dev, rx_dma)) { -+ ret = -ENOMEM; -+ return ret; -+ } -+ -+ /* check to see if we need dummy buffer for leftover bytes */ -+ rx_align = xfer->len % controller->in_blk_sz; -+ if (rx_align) { -+ rx_dummy_dma = dma_map_single(controller->dev, -+ controller->dummy, controller->in_fifo_sz, -+ DMA_FROM_DEVICE); -+ -+ if (dma_mapping_error(controller->dev, rx_dummy_dma)) { -+ ret = -ENOMEM; -+ goto err_map_rx_dummy; -+ } -+ } -+ } -+ -+ if (xfer->tx_buf) { -+ tx_dma = dma_map_single(controller->dev, -+ (void *)xfer->tx_buf, xfer->len, DMA_TO_DEVICE); -+ -+ if (dma_mapping_error(controller->dev, tx_dma)) { -+ ret = -ENOMEM; -+ goto err_map_tx; -+ } -+ -+ /* check to see if we need dummy buffer for leftover bytes */ -+ tx_align = xfer->len % controller->out_blk_sz; -+ if (tx_align) { -+ memcpy(controller->dummy + SZ_1K, -+ xfer->tx_buf + xfer->len - tx_align, -+ tx_align); -+ memset(controller->dummy + SZ_1K + tx_align, 0, -+ controller->out_blk_sz - tx_align); -+ -+ tx_dummy_dma = dma_map_single(controller->dev, -+ controller->dummy + SZ_1K, -+ controller->out_blk_sz, DMA_TO_DEVICE); -+ -+ if (dma_mapping_error(controller->dev, tx_dummy_dma)) { -+ ret = -ENOMEM; -+ goto err_map_tx_dummy; -+ } -+ } -+ } -+ -+ atomic_set(&controller->dma_outstanding, 0); -+ -+ while (bytes_to_xfer > 0) { -+ xfer_len = min_t(u32, bytes_to_xfer, SPI_MAX_XFER); -+ n_words = DIV_ROUND_UP(xfer_len, controller->w_size); -+ -+ /* write out current word count to controller */ -+ writel_relaxed(n_words, controller->base + QUP_MX_INPUT_CNT); -+ writel_relaxed(n_words, controller->base + QUP_MX_OUTPUT_CNT); -+ -+ reinit_completion(&controller->done); -+ -+ if (xfer->tx_buf) { -+ /* recalc align for each transaction */ -+ tx_align = xfer_len % controller->out_blk_sz; -+ -+ if (tx_align) -+ tx_nents = 2; -+ else -+ tx_nents = 1; -+ -+ /* initialize scatterlists */ -+ sg_init_table(tx_sg, tx_nents); -+ sg_dma_len(&tx_sg[0]) = xfer_len - tx_align; -+ sg_dma_address(&tx_sg[0]) = tx_dma + offset; -+ -+ /* account for non block size transfer */ -+ if (tx_align) { -+ sg_dma_len(&tx_sg[1]) = controller->out_blk_sz; -+ sg_dma_address(&tx_sg[1]) = tx_dummy_dma; -+ } -+ -+ txd = dmaengine_prep_slave_sg(controller->tx_chan, -+ tx_sg, tx_nents, DMA_MEM_TO_DEV, 0); -+ if (!txd) { -+ ret = -ENOMEM; -+ goto err_unmap; -+ } -+ -+ atomic_inc(&controller->dma_outstanding); -+ -+ txd->callback = qup_dma_callback; -+ txd->callback_param = controller; -+ -+ tx_cookie = dmaengine_submit(txd); -+ -+ dma_async_issue_pending(controller->tx_chan); -+ } -+ -+ if (xfer->rx_buf) { -+ /* recalc align for each transaction */ -+ rx_align = xfer_len % controller->in_blk_sz; -+ -+ if (rx_align) -+ rx_nents = 2; -+ else -+ rx_nents = 1; -+ -+ /* initialize scatterlists */ -+ sg_init_table(rx_sg, rx_nents); -+ sg_dma_address(&rx_sg[0]) = rx_dma + offset; -+ sg_dma_len(&rx_sg[0]) = xfer_len - rx_align; -+ -+ /* account for non block size transfer */ -+ if (rx_align) { -+ sg_dma_len(&rx_sg[1]) = controller->in_blk_sz; -+ sg_dma_address(&rx_sg[1]) = rx_dummy_dma; -+ } -+ -+ rxd = dmaengine_prep_slave_sg(controller->rx_chan, -+ rx_sg, rx_nents, DMA_DEV_TO_MEM, 0); -+ if (!rxd) { -+ ret = -ENOMEM; -+ goto err_unmap; -+ } -+ -+ atomic_inc(&controller->dma_outstanding); -+ -+ rxd->callback = qup_dma_callback; -+ rxd->callback_param = controller; -+ -+ rx_cookie = dmaengine_submit(rxd); -+ -+ dma_async_issue_pending(controller->rx_chan); -+ } -+ -+ if (spi_qup_set_state(controller, QUP_STATE_RUN)) { -+ dev_warn(controller->dev, "cannot set EXECUTE state\n"); -+ goto err_unmap; -+ } -+ -+ if (!wait_for_completion_timeout(&controller->done, -+ msecs_to_jiffies(1000))) { -+ ret = -ETIMEDOUT; -+ -+ /* clear out all the DMA transactions */ -+ if (xfer->tx_buf) -+ dmaengine_terminate_all(controller->tx_chan); -+ if (xfer->rx_buf) -+ dmaengine_terminate_all(controller->rx_chan); -+ -+ goto err_unmap; -+ } -+ -+ if (rx_align) -+ memcpy(xfer->rx_buf + offset + xfer->len - rx_align, -+ controller->dummy, rx_align); -+ -+ /* adjust remaining bytes to transfer */ -+ bytes_to_xfer -= xfer_len; -+ offset += xfer_len; -+ -+ -+ /* reset mini-core state so we can program next transaction */ -+ if (spi_qup_set_state(controller, QUP_STATE_RESET)) { -+ dev_err(controller->dev, "cannot set RESET state\n"); -+ goto err_unmap; -+ } -+ } -+ -+ ret = 0; -+ -+err_unmap: -+ if (tx_align) -+ dma_unmap_single(controller->dev, tx_dummy_dma, -+ controller->out_fifo_sz, DMA_TO_DEVICE); -+err_map_tx_dummy: -+ if (xfer->tx_buf) -+ dma_unmap_single(controller->dev, tx_dma, xfer->len, -+ DMA_TO_DEVICE); -+err_map_tx: -+ if (rx_align) -+ dma_unmap_single(controller->dev, rx_dummy_dma, -+ controller->in_fifo_sz, DMA_FROM_DEVICE); -+err_map_rx_dummy: -+ if (xfer->rx_buf) -+ dma_unmap_single(controller->dev, rx_dma, xfer->len, -+ DMA_FROM_DEVICE); -+ -+ return ret; -+} -+ - static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id) - { - struct spi_qup *controller = dev_id; -@@ -315,11 +545,13 @@ static irqreturn_t spi_qup_qup_irq(int i - error = -EIO; - } - -- if (opflags & QUP_OP_IN_SERVICE_FLAG) -- spi_qup_fifo_read(controller, xfer); -+ if (!controller->use_dma) { -+ if (opflags & QUP_OP_IN_SERVICE_FLAG) -+ spi_qup_fifo_read(controller, xfer); - -- if (opflags & QUP_OP_OUT_SERVICE_FLAG) -- spi_qup_fifo_write(controller, xfer); -+ if (opflags & QUP_OP_OUT_SERVICE_FLAG) -+ spi_qup_fifo_write(controller, xfer); -+ } - - spin_lock_irqsave(&controller->lock, flags); - controller->error = error; -@@ -339,6 +571,8 @@ static int spi_qup_io_config(struct spi_ - struct spi_qup *controller = spi_master_get_devdata(spi->master); - u32 config, iomode, mode, control; - int ret, n_words, w_size; -+ size_t dma_align = dma_get_cache_alignment(); -+ u32 dma_available = 0; - - if (spi->mode & SPI_LOOP && xfer->len > controller->in_fifo_sz) { - dev_err(controller->dev, "too big size for loopback %d > %d\n", -@@ -367,6 +601,11 @@ static int spi_qup_io_config(struct spi_ - n_words = xfer->len / w_size; - controller->w_size = w_size; - -+ if (controller->rx_chan && -+ IS_ALIGNED((size_t)xfer->tx_buf, dma_align) && -+ IS_ALIGNED((size_t)xfer->rx_buf, dma_align)) -+ dma_available = 1; -+ - if (n_words <= (controller->in_fifo_sz / sizeof(u32))) { - mode = QUP_IO_M_MODE_FIFO; - writel_relaxed(n_words, controller->base + QUP_MX_READ_CNT); -@@ -374,19 +613,31 @@ static int spi_qup_io_config(struct spi_ - /* must be zero for FIFO */ - writel_relaxed(0, controller->base + QUP_MX_INPUT_CNT); - writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT); -- } else { -+ controller->use_dma = 0; -+ } else if (!dma_available) { - mode = QUP_IO_M_MODE_BLOCK; - writel_relaxed(n_words, controller->base + QUP_MX_INPUT_CNT); - writel_relaxed(n_words, controller->base + QUP_MX_OUTPUT_CNT); - /* must be zero for BLOCK and BAM */ - writel_relaxed(0, controller->base + QUP_MX_READ_CNT); - writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT); -+ controller->use_dma = 0; -+ } else { -+ mode = QUP_IO_M_MODE_DMOV; -+ writel_relaxed(0, controller->base + QUP_MX_READ_CNT); -+ writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT); -+ controller->use_dma = 1; - } - - iomode = readl_relaxed(controller->base + QUP_IO_M_MODES); - /* Set input and output transfer mode */ - iomode &= ~(QUP_IO_M_INPUT_MODE_MASK | QUP_IO_M_OUTPUT_MODE_MASK); -- iomode &= ~(QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN); -+ -+ if (!controller->use_dma) -+ iomode &= ~(QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN); -+ else -+ iomode |= QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN; -+ - iomode |= (mode << QUP_IO_M_OUTPUT_MODE_MASK_SHIFT); - iomode |= (mode << QUP_IO_M_INPUT_MODE_MASK_SHIFT); - -@@ -428,6 +679,14 @@ static int spi_qup_io_config(struct spi_ - config &= ~(QUP_CONFIG_NO_INPUT | QUP_CONFIG_NO_OUTPUT | QUP_CONFIG_N); - config |= xfer->bits_per_word - 1; - config |= QUP_CONFIG_SPI_MODE; -+ -+ if (controller->use_dma) { -+ if (!xfer->tx_buf) -+ config |= QUP_CONFIG_NO_OUTPUT; -+ if (!xfer->rx_buf) -+ config |= QUP_CONFIG_NO_INPUT; -+ } -+ - writel_relaxed(config, controller->base + QUP_CONFIG); - - /* only write to OPERATIONAL_MASK when register is present */ -@@ -461,25 +720,29 @@ static int spi_qup_transfer_one(struct s - controller->tx_bytes = 0; - spin_unlock_irqrestore(&controller->lock, flags); - -- if (spi_qup_set_state(controller, QUP_STATE_RUN)) { -- dev_warn(controller->dev, "cannot set RUN state\n"); -- goto exit; -- } -+ if (controller->use_dma) { -+ ret = spi_qup_do_dma(controller, xfer); -+ } else { -+ if (spi_qup_set_state(controller, QUP_STATE_RUN)) { -+ dev_warn(controller->dev, "cannot set RUN state\n"); -+ goto exit; -+ } - -- if (spi_qup_set_state(controller, QUP_STATE_PAUSE)) { -- dev_warn(controller->dev, "cannot set PAUSE state\n"); -- goto exit; -- } -+ if (spi_qup_set_state(controller, QUP_STATE_PAUSE)) { -+ dev_warn(controller->dev, "cannot set PAUSE state\n"); -+ goto exit; -+ } - -- spi_qup_fifo_write(controller, xfer); -+ spi_qup_fifo_write(controller, xfer); - -- if (spi_qup_set_state(controller, QUP_STATE_RUN)) { -- dev_warn(controller->dev, "cannot set EXECUTE state\n"); -- goto exit; -- } -+ if (spi_qup_set_state(controller, QUP_STATE_RUN)) { -+ dev_warn(controller->dev, "cannot set EXECUTE state\n"); -+ goto exit; -+ } - -- if (!wait_for_completion_timeout(&controller->done, timeout)) -- ret = -ETIMEDOUT; -+ if (!wait_for_completion_timeout(&controller->done, timeout)) -+ ret = -ETIMEDOUT; -+ } - exit: - spi_qup_set_state(controller, QUP_STATE_RESET); - spin_lock_irqsave(&controller->lock, flags); -@@ -563,6 +826,7 @@ static int spi_qup_probe(struct platform - master->transfer_one = spi_qup_transfer_one; - master->dev.of_node = pdev->dev.of_node; - master->auto_runtime_pm = true; -+ master->dma_alignment = dma_get_cache_alignment(); - - platform_set_drvdata(pdev, master); - -@@ -628,6 +892,56 @@ static int spi_qup_probe(struct platform - QUP_ERROR_INPUT_UNDER_RUN | QUP_ERROR_OUTPUT_UNDER_RUN, - base + QUP_ERROR_FLAGS_EN); - -+ /* allocate dma resources, if available */ -+ controller->rx_chan = dma_request_slave_channel(&pdev->dev, "rx"); -+ if (controller->rx_chan) { -+ controller->tx_chan = -+ dma_request_slave_channel(&pdev->dev, "tx"); -+ -+ if (!controller->tx_chan) { -+ dev_err(&pdev->dev, "Failed to allocate dma tx chan"); -+ dma_release_channel(controller->rx_chan); -+ } -+ -+ /* set DMA parameters */ -+ controller->rx_conf.device_fc = 1; -+ controller->rx_conf.src_addr = res->start + QUP_INPUT_FIFO; -+ controller->rx_conf.src_maxburst = controller->in_blk_sz; -+ -+ controller->tx_conf.device_fc = 1; -+ controller->tx_conf.dst_addr = res->start + QUP_OUTPUT_FIFO; -+ controller->tx_conf.dst_maxburst = controller->out_blk_sz; -+ -+ if (dmaengine_slave_config(controller->rx_chan, -+ &controller->rx_conf)) { -+ dev_err(&pdev->dev, "failed to configure RX channel\n"); -+ -+ dma_release_channel(controller->rx_chan); -+ dma_release_channel(controller->tx_chan); -+ controller->tx_chan = NULL; -+ controller->rx_chan = NULL; -+ } else if (dmaengine_slave_config(controller->tx_chan, -+ &controller->tx_conf)) { -+ dev_err(&pdev->dev, "failed to configure TX channel\n"); -+ -+ dma_release_channel(controller->rx_chan); -+ dma_release_channel(controller->tx_chan); -+ controller->tx_chan = NULL; -+ controller->rx_chan = NULL; -+ } -+ -+ controller->dummy = devm_kmalloc(controller->dev, PAGE_SIZE, -+ GFP_KERNEL); -+ -+ if (!controller->dummy) { -+ dma_release_channel(controller->rx_chan); -+ dma_release_channel(controller->tx_chan); -+ controller->tx_chan = NULL; -+ controller->rx_chan = NULL; -+ } -+ } -+ -+ - writel_relaxed(0, base + SPI_CONFIG); - writel_relaxed(SPI_IO_C_NO_TRI_STATE, base + SPI_IO_CONTROL); - -@@ -740,6 +1054,11 @@ static int spi_qup_remove(struct platfor - if (ret) - return ret; - -+ if (controller->rx_chan) -+ dma_release_channel(controller->rx_chan); -+ if (controller->tx_chan) -+ dma_release_channel(controller->tx_chan); -+ - clk_disable_unprepare(controller->cclk); - clk_disable_unprepare(controller->iclk); - diff --git a/target/linux/ipq806x/patches-4.0/002-v3-spi-qup-Fix-incorrect-block-transfers.patch b/target/linux/ipq806x/patches-4.0/002-v3-spi-qup-Fix-incorrect-block-transfers.patch deleted file mode 100644 index c8c6e4f..0000000 --- a/target/linux/ipq806x/patches-4.0/002-v3-spi-qup-Fix-incorrect-block-transfers.patch +++ /dev/null @@ -1,376 +0,0 @@ -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [v3] spi: qup: Fix incorrect block transfers -From: Andy Gross <agross@codeaurora.org> -X-Patchwork-Id: 5007321 -Message-Id: <1412112088-25928-1-git-send-email-agross@codeaurora.org> -To: Mark Brown <broonie@kernel.org> -Cc: linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org, - linux-arm-kernel@lists.infradead.org, linux-arm-msm@vger.kernel.org, - "Ivan T. Ivanov" <iivanov@mm-sol.com>, - Bjorn Andersson <bjorn.andersson@sonymobile.com>, - Kumar Gala <galak@codeaurora.org>, Andy Gross <agross@codeaurora.org> -Date: Tue, 30 Sep 2014 16:21:28 -0500 - -This patch fixes a number of errors with the QUP block transfer mode. Errors -manifested themselves as input underruns, output overruns, and timed out -transactions. - -The block mode does not require the priming that occurs in FIFO mode. At the -moment that the QUP is placed into the RUN state, the QUP will immediately raise -an interrupt if the request is a write. Therefore, there is no need to prime -the pump. - -In addition, the block transfers require that whole blocks of data are -read/written at a time. The last block of data that completes a transaction may -contain less than a full blocks worth of data. - -Each block of data results in an input/output service interrupt accompanied with -a input/output block flag set. Additional block reads/writes require clearing -of the service flag. It is ok to check for additional blocks of data in the -ISR, but you have to ack every block you transfer. Imbalanced acks result in -early return from complete transactions with pending interrupts that still have -to be ack'd. The next transaction can be affected by these interrupts. -Transactions are deemed complete when the MAX_INPUT or MAX_OUTPUT flag are set. - -Changes from v2: -- Added in additional completion check so that transaction done is not - prematurely signaled. -- Fixed various review comments. - -Changes from v1: -- Split out read/write block function. -- Removed extraneous checks for transfer length - -Signed-off-by: Andy Gross <agross@codeaurora.org> - ---- -drivers/spi/spi-qup.c | 201 ++++++++++++++++++++++++++++++++++++------------- - 1 file changed, 148 insertions(+), 53 deletions(-) - ---- a/drivers/spi/spi-qup.c -+++ b/drivers/spi/spi-qup.c -@@ -82,6 +82,8 @@ - #define QUP_IO_M_MODE_BAM 3 - - /* QUP_OPERATIONAL fields */ -+#define QUP_OP_IN_BLOCK_READ_REQ BIT(13) -+#define QUP_OP_OUT_BLOCK_WRITE_REQ BIT(12) - #define QUP_OP_MAX_INPUT_DONE_FLAG BIT(11) - #define QUP_OP_MAX_OUTPUT_DONE_FLAG BIT(10) - #define QUP_OP_IN_SERVICE_FLAG BIT(9) -@@ -147,6 +149,7 @@ struct spi_qup { - int tx_bytes; - int rx_bytes; - int qup_v1; -+ int mode; - - int use_dma; - -@@ -213,30 +216,14 @@ static int spi_qup_set_state(struct spi_ - return 0; - } - -- --static void spi_qup_fifo_read(struct spi_qup *controller, -- struct spi_transfer *xfer) -+static void spi_qup_fill_read_buffer(struct spi_qup *controller, -+ struct spi_transfer *xfer, u32 data) - { - u8 *rx_buf = xfer->rx_buf; -- u32 word, state; -- int idx, shift, w_size; -- -- w_size = controller->w_size; -- -- while (controller->rx_bytes < xfer->len) { -- -- state = readl_relaxed(controller->base + QUP_OPERATIONAL); -- if (0 == (state & QUP_OP_IN_FIFO_NOT_EMPTY)) -- break; -- -- word = readl_relaxed(controller->base + QUP_INPUT_FIFO); -- -- if (!rx_buf) { -- controller->rx_bytes += w_size; -- continue; -- } -+ int idx, shift; - -- for (idx = 0; idx < w_size; idx++, controller->rx_bytes++) { -+ if (rx_buf) -+ for (idx = 0; idx < controller->w_size; idx++) { - /* - * The data format depends on bytes per SPI word: - * 4 bytes: 0x12345678 -@@ -244,41 +231,139 @@ static void spi_qup_fifo_read(struct spi - * 1 byte : 0x00000012 - */ - shift = BITS_PER_BYTE; -- shift *= (w_size - idx - 1); -- rx_buf[controller->rx_bytes] = word >> shift; -+ shift *= (controller->w_size - idx - 1); -+ rx_buf[controller->rx_bytes + idx] = data >> shift; -+ } -+ -+ controller->rx_bytes += controller->w_size; -+} -+ -+static void spi_qup_prepare_write_data(struct spi_qup *controller, -+ struct spi_transfer *xfer, u32 *data) -+{ -+ const u8 *tx_buf = xfer->tx_buf; -+ u32 val; -+ int idx; -+ -+ *data = 0; -+ -+ if (tx_buf) -+ for (idx = 0; idx < controller->w_size; idx++) { -+ val = tx_buf[controller->tx_bytes + idx]; -+ *data |= val << (BITS_PER_BYTE * (3 - idx)); - } -+ -+ controller->tx_bytes += controller->w_size; -+} -+ -+static void spi_qup_fifo_read(struct spi_qup *controller, -+ struct spi_transfer *xfer) -+{ -+ u32 data; -+ -+ /* clear service request */ -+ writel_relaxed(QUP_OP_IN_SERVICE_FLAG, -+ controller->base + QUP_OPERATIONAL); -+ -+ while (controller->rx_bytes < xfer->len) { -+ if (!(readl_relaxed(controller->base + QUP_OPERATIONAL) & -+ QUP_OP_IN_FIFO_NOT_EMPTY)) -+ break; -+ -+ data = readl_relaxed(controller->base + QUP_INPUT_FIFO); -+ -+ spi_qup_fill_read_buffer(controller, xfer, data); - } - } - - static void spi_qup_fifo_write(struct spi_qup *controller, -- struct spi_transfer *xfer) -+ struct spi_transfer *xfer) - { -- const u8 *tx_buf = xfer->tx_buf; -- u32 word, state, data; -- int idx, w_size; -+ u32 data; - -- w_size = controller->w_size; -+ /* clear service request */ -+ writel_relaxed(QUP_OP_OUT_SERVICE_FLAG, -+ controller->base + QUP_OPERATIONAL); - - while (controller->tx_bytes < xfer->len) { - -- state = readl_relaxed(controller->base + QUP_OPERATIONAL); -- if (state & QUP_OP_OUT_FIFO_FULL) -+ if (readl_relaxed(controller->base + QUP_OPERATIONAL) & -+ QUP_OP_OUT_FIFO_FULL) - break; - -- word = 0; -- for (idx = 0; idx < w_size; idx++, controller->tx_bytes++) { -+ spi_qup_prepare_write_data(controller, xfer, &data); -+ writel_relaxed(data, controller->base + QUP_OUTPUT_FIFO); - -- if (!tx_buf) { -- controller->tx_bytes += w_size; -- break; -- } -+ } -+} - -- data = tx_buf[controller->tx_bytes]; -- word |= data << (BITS_PER_BYTE * (3 - idx)); -- } -+static void spi_qup_block_read(struct spi_qup *controller, -+ struct spi_transfer *xfer) -+{ -+ u32 data; -+ u32 reads_per_blk = controller->in_blk_sz >> 2; -+ u32 num_words = (xfer->len - controller->rx_bytes) / controller->w_size; -+ int i; -+ -+ do { -+ /* ACK by clearing service flag */ -+ writel_relaxed(QUP_OP_IN_SERVICE_FLAG, -+ controller->base + QUP_OPERATIONAL); -+ -+ /* transfer up to a block size of data in a single pass */ -+ for (i = 0; num_words && i < reads_per_blk; i++, num_words--) { -+ -+ /* read data and fill up rx buffer */ -+ data = readl_relaxed(controller->base + QUP_INPUT_FIFO); -+ spi_qup_fill_read_buffer(controller, xfer, data); -+ } -+ -+ /* check to see if next block is ready */ -+ if (!(readl_relaxed(controller->base + QUP_OPERATIONAL) & -+ QUP_OP_IN_BLOCK_READ_REQ)) -+ break; - -- writel_relaxed(word, controller->base + QUP_OUTPUT_FIFO); -- } -+ } while (num_words); -+ -+ /* -+ * Due to extra stickiness of the QUP_OP_IN_SERVICE_FLAG during block -+ * reads, it has to be cleared again at the very end -+ */ -+ if (readl_relaxed(controller->base + QUP_OPERATIONAL) & -+ QUP_OP_MAX_INPUT_DONE_FLAG) -+ writel_relaxed(QUP_OP_IN_SERVICE_FLAG, -+ controller->base + QUP_OPERATIONAL); -+ -+} -+ -+static void spi_qup_block_write(struct spi_qup *controller, -+ struct spi_transfer *xfer) -+{ -+ u32 data; -+ u32 writes_per_blk = controller->out_blk_sz >> 2; -+ u32 num_words = (xfer->len - controller->tx_bytes) / controller->w_size; -+ int i; -+ -+ do { -+ /* ACK by clearing service flag */ -+ writel_relaxed(QUP_OP_OUT_SERVICE_FLAG, -+ controller->base + QUP_OPERATIONAL); -+ -+ /* transfer up to a block size of data in a single pass */ -+ for (i = 0; num_words && i < writes_per_blk; i++, num_words--) { -+ -+ /* swizzle the bytes for output and write out */ -+ spi_qup_prepare_write_data(controller, xfer, &data); -+ writel_relaxed(data, -+ controller->base + QUP_OUTPUT_FIFO); -+ } -+ -+ /* check to see if next block is ready */ -+ if (!(readl_relaxed(controller->base + QUP_OPERATIONAL) & -+ QUP_OP_OUT_BLOCK_WRITE_REQ)) -+ break; -+ -+ } while (num_words); - } - - static void qup_dma_callback(void *data) -@@ -515,9 +600,9 @@ static irqreturn_t spi_qup_qup_irq(int i - - writel_relaxed(qup_err, controller->base + QUP_ERROR_FLAGS); - writel_relaxed(spi_err, controller->base + SPI_ERROR_FLAGS); -- writel_relaxed(opflags, controller->base + QUP_OPERATIONAL); - - if (!xfer) { -+ writel_relaxed(opflags, controller->base + QUP_OPERATIONAL); - dev_err_ratelimited(controller->dev, "unexpected irq %08x %08x %08x\n", - qup_err, spi_err, opflags); - return IRQ_HANDLED; -@@ -546,11 +631,19 @@ static irqreturn_t spi_qup_qup_irq(int i - } - - if (!controller->use_dma) { -- if (opflags & QUP_OP_IN_SERVICE_FLAG) -- spi_qup_fifo_read(controller, xfer); -+ if (opflags & QUP_OP_IN_SERVICE_FLAG) { -+ if (opflags & QUP_OP_IN_BLOCK_READ_REQ) -+ spi_qup_block_read(controller, xfer); -+ else -+ spi_qup_fifo_read(controller, xfer); -+ } - -- if (opflags & QUP_OP_OUT_SERVICE_FLAG) -- spi_qup_fifo_write(controller, xfer); -+ if (opflags & QUP_OP_OUT_SERVICE_FLAG) { -+ if (opflags & QUP_OP_OUT_BLOCK_WRITE_REQ) -+ spi_qup_block_write(controller, xfer); -+ else -+ spi_qup_fifo_write(controller, xfer); -+ } - } - - spin_lock_irqsave(&controller->lock, flags); -@@ -558,7 +651,8 @@ static irqreturn_t spi_qup_qup_irq(int i - controller->xfer = xfer; - spin_unlock_irqrestore(&controller->lock, flags); - -- if (controller->rx_bytes == xfer->len || error) -+ if ((controller->rx_bytes == xfer->len && -+ (opflags & QUP_OP_MAX_INPUT_DONE_FLAG)) || error) - complete(&controller->done); - - return IRQ_HANDLED; -@@ -569,7 +663,7 @@ static irqreturn_t spi_qup_qup_irq(int i - static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer) - { - struct spi_qup *controller = spi_master_get_devdata(spi->master); -- u32 config, iomode, mode, control; -+ u32 config, iomode, control; - int ret, n_words, w_size; - size_t dma_align = dma_get_cache_alignment(); - u32 dma_available = 0; -@@ -607,7 +701,7 @@ static int spi_qup_io_config(struct spi_ - dma_available = 1; - - if (n_words <= (controller->in_fifo_sz / sizeof(u32))) { -- mode = QUP_IO_M_MODE_FIFO; -+ controller->mode = QUP_IO_M_MODE_FIFO; - writel_relaxed(n_words, controller->base + QUP_MX_READ_CNT); - writel_relaxed(n_words, controller->base + QUP_MX_WRITE_CNT); - /* must be zero for FIFO */ -@@ -615,7 +709,7 @@ static int spi_qup_io_config(struct spi_ - writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT); - controller->use_dma = 0; - } else if (!dma_available) { -- mode = QUP_IO_M_MODE_BLOCK; -+ controller->mode = QUP_IO_M_MODE_BLOCK; - writel_relaxed(n_words, controller->base + QUP_MX_INPUT_CNT); - writel_relaxed(n_words, controller->base + QUP_MX_OUTPUT_CNT); - /* must be zero for BLOCK and BAM */ -@@ -623,7 +717,7 @@ static int spi_qup_io_config(struct spi_ - writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT); - controller->use_dma = 0; - } else { -- mode = QUP_IO_M_MODE_DMOV; -+ controller->mode = QUP_IO_M_MODE_DMOV; - writel_relaxed(0, controller->base + QUP_MX_READ_CNT); - writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT); - controller->use_dma = 1; -@@ -638,8 +732,8 @@ static int spi_qup_io_config(struct spi_ - else - iomode |= QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN; - -- iomode |= (mode << QUP_IO_M_OUTPUT_MODE_MASK_SHIFT); -- iomode |= (mode << QUP_IO_M_INPUT_MODE_MASK_SHIFT); -+ iomode |= (controller->mode << QUP_IO_M_OUTPUT_MODE_MASK_SHIFT); -+ iomode |= (controller->mode << QUP_IO_M_INPUT_MODE_MASK_SHIFT); - - writel_relaxed(iomode, controller->base + QUP_IO_M_MODES); - -@@ -733,7 +827,8 @@ static int spi_qup_transfer_one(struct s - goto exit; - } - -- spi_qup_fifo_write(controller, xfer); -+ if (controller->mode == QUP_IO_M_MODE_FIFO) -+ spi_qup_fifo_write(controller, xfer); - - if (spi_qup_set_state(controller, QUP_STATE_RUN)) { - dev_warn(controller->dev, "cannot set EXECUTE state\n"); -@@ -750,6 +845,7 @@ exit: - if (!ret) - ret = controller->error; - spin_unlock_irqrestore(&controller->lock, flags); -+ - return ret; - } - diff --git a/target/linux/ipq806x/patches-4.0/003-spi-qup-Ensure-done-detection.patch b/target/linux/ipq806x/patches-4.0/003-spi-qup-Ensure-done-detection.patch deleted file mode 100644 index 7052227..0000000 --- a/target/linux/ipq806x/patches-4.0/003-spi-qup-Ensure-done-detection.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 4faba89e3ffbb1c5f6232651375b9b3212b50f02 Mon Sep 17 00:00:00 2001 -From: Andy Gross <agross@codeaurora.org> -Date: Thu, 15 Jan 2015 17:56:02 -0800 -Subject: [PATCH] spi: qup: Ensure done detection - -This patch fixes an issue where a SPI transaction has completed, but the done -condition is missed. This occurs because at the time of interrupt the -MAX_INPUT_DONE_FLAG is not asserted. However, in the process of reading blocks -of data from the FIFO, the last portion of data comes in. - -The opflags read at the beginning of the irq handler no longer matches the -current opflag state. To get around this condition, the block read function -should update the opflags so that done detection is correct after the return. - -Change-Id: If109e0eeb432f96000d765c4b34dbb2269f8093f -Signed-off-by: Andy Gross <agross@codeaurora.org> ---- - drivers/spi/spi-qup.c | 12 +++++++----- - 1 file changed, 7 insertions(+), 5 deletions(-) - ---- a/drivers/spi/spi-qup.c -+++ b/drivers/spi/spi-qup.c -@@ -298,7 +298,7 @@ static void spi_qup_fifo_write(struct sp - } - - static void spi_qup_block_read(struct spi_qup *controller, -- struct spi_transfer *xfer) -+ struct spi_transfer *xfer, u32 *opflags) - { - u32 data; - u32 reads_per_blk = controller->in_blk_sz >> 2; -@@ -327,10 +327,12 @@ static void spi_qup_block_read(struct sp - - /* - * Due to extra stickiness of the QUP_OP_IN_SERVICE_FLAG during block -- * reads, it has to be cleared again at the very end -+ * reads, it has to be cleared again at the very end. However, be sure -+ * to refresh opflags value because MAX_INPUT_DONE_FLAG may now be -+ * present and this is used to determine if transaction is complete - */ -- if (readl_relaxed(controller->base + QUP_OPERATIONAL) & -- QUP_OP_MAX_INPUT_DONE_FLAG) -+ *opflags = readl_relaxed(controller->base + QUP_OPERATIONAL); -+ if (*opflags & QUP_OP_MAX_INPUT_DONE_FLAG) - writel_relaxed(QUP_OP_IN_SERVICE_FLAG, - controller->base + QUP_OPERATIONAL); - -@@ -633,7 +635,7 @@ static irqreturn_t spi_qup_qup_irq(int i - if (!controller->use_dma) { - if (opflags & QUP_OP_IN_SERVICE_FLAG) { - if (opflags & QUP_OP_IN_BLOCK_READ_REQ) -- spi_qup_block_read(controller, xfer); -+ spi_qup_block_read(controller, xfer, &opflags); - else - spi_qup_fifo_read(controller, xfer); - } diff --git a/target/linux/ipq806x/patches-4.0/011-watchdog-qcom-use-timer-devicetree-binding.patch b/target/linux/ipq806x/patches-4.0/011-watchdog-qcom-use-timer-devicetree-binding.patch deleted file mode 100644 index 68489a8..0000000 --- a/target/linux/ipq806x/patches-4.0/011-watchdog-qcom-use-timer-devicetree-binding.patch +++ /dev/null @@ -1,67 +0,0 @@ -From fded70251b1b58f68de1d3757ece9965f0b75452 Mon Sep 17 00:00:00 2001 -From: Mathieu Olivari <mathieu@codeaurora.org> -Date: Thu, 19 Feb 2015 20:19:30 -0800 -Subject: [PATCH 1/3] watchdog: qcom: use timer devicetree binding - -MSM watchdog configuration happens in the same register block as the -timer, so we'll use the same binding as the existing timer. - -The qcom-wdt will now be probed when devicetree has an entry compatible -with "qcom,kpss-timer" or "qcom-scss-timer". - -Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> ---- - drivers/watchdog/qcom-wdt.c | 21 +++++++++++++++------ - 1 file changed, 15 insertions(+), 6 deletions(-) - ---- a/drivers/watchdog/qcom-wdt.c -+++ b/drivers/watchdog/qcom-wdt.c -@@ -20,9 +20,9 @@ - #include <linux/reboot.h> - #include <linux/watchdog.h> - --#define WDT_RST 0x0 --#define WDT_EN 0x8 --#define WDT_BITE_TIME 0x24 -+#define WDT_RST 0x38 -+#define WDT_EN 0x40 -+#define WDT_BITE_TIME 0x5C - - struct qcom_wdt { - struct watchdog_device wdd; -@@ -117,6 +117,8 @@ static int qcom_wdt_probe(struct platfor - { - struct qcom_wdt *wdt; - struct resource *res; -+ struct device_node *np = pdev->dev.of_node; -+ u32 percpu_offset; - int ret; - - wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); -@@ -124,6 +126,14 @@ static int qcom_wdt_probe(struct platfor - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ -+ /* We use CPU0's DGT for the watchdog */ -+ if (of_property_read_u32(np, "cpu-offset", &percpu_offset)) -+ percpu_offset = 0; -+ -+ res->start += percpu_offset; -+ res->end += percpu_offset; -+ - wdt->base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(wdt->base)) - return PTR_ERR(wdt->base); -@@ -203,9 +213,8 @@ static int qcom_wdt_remove(struct platfo - } - - static const struct of_device_id qcom_wdt_of_table[] = { -- { .compatible = "qcom,kpss-wdt-msm8960", }, -- { .compatible = "qcom,kpss-wdt-apq8064", }, -- { .compatible = "qcom,kpss-wdt-ipq8064", }, -+ { .compatible = "qcom,kpss-timer" }, -+ { .compatible = "qcom,scss-timer" }, - { }, - }; - MODULE_DEVICE_TABLE(of, qcom_wdt_of_table); diff --git a/target/linux/ipq806x/patches-4.0/012-ARM-qcom-add-description-of-KPSS-WDT-for-IPQ8064.patch b/target/linux/ipq806x/patches-4.0/012-ARM-qcom-add-description-of-KPSS-WDT-for-IPQ8064.patch deleted file mode 100644 index ae96776..0000000 --- a/target/linux/ipq806x/patches-4.0/012-ARM-qcom-add-description-of-KPSS-WDT-for-IPQ8064.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 297cf8136ecd6a56520888fd28948393766b8ee7 Mon Sep 17 00:00:00 2001 -From: Mathieu Olivari <mathieu@codeaurora.org> -Date: Thu, 19 Feb 2015 20:27:39 -0800 -Subject: [PATCH 2/3] ARM: qcom: add description of KPSS WDT for IPQ8064 - -Add the watchdog related entries to the Krait Processor Sub-system -(KPSS) timer IPQ8064 devicetree section. Also, add a fixed-clock -description of SLEEP_CLK, which will do for now. - -Signed-off-by: Josh Cartwright <joshc@codeaurora.org> -Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> ---- - arch/arm/boot/dts/qcom-ipq8064.dtsi | 14 +++++++++++++- - 1 file changed, 13 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -60,6 +60,14 @@ - }; - }; - -+ clocks { -+ sleep_clk: sleep_clk { -+ compatible = "fixed-clock"; -+ clock-frequency = <32768>; -+ #clock-cells = <0>; -+ }; -+ }; -+ - soc: soc { - #address-cells = <1>; - #size-cells = <1>; -@@ -89,10 +97,14 @@ - compatible = "qcom,kpss-timer", "qcom,msm-timer"; - interrupts = <1 1 0x301>, - <1 2 0x301>, -- <1 3 0x301>; -+ <1 3 0x301>, -+ <1 4 0x301>, -+ <1 5 0x301>; - reg = <0x0200a000 0x100>; - clock-frequency = <25000000>, - <32768>; -+ clocks = <&sleep_clk>; -+ clock-names = "sleep"; - cpu-offset = <0x80000>; - }; - diff --git a/target/linux/ipq806x/patches-4.0/013-ARM-msm-add-watchdog-entries-to-DT-timer-binding-doc.patch b/target/linux/ipq806x/patches-4.0/013-ARM-msm-add-watchdog-entries-to-DT-timer-binding-doc.patch deleted file mode 100644 index e775f12..0000000 --- a/target/linux/ipq806x/patches-4.0/013-ARM-msm-add-watchdog-entries-to-DT-timer-binding-doc.patch +++ /dev/null @@ -1,50 +0,0 @@ -From e535f01dffb6dd9e09934fa219be52af3437a8f6 Mon Sep 17 00:00:00 2001 -From: Mathieu Olivari <mathieu@codeaurora.org> -Date: Thu, 19 Feb 2015 20:36:27 -0800 -Subject: [PATCH 3/3] ARM: msm: add watchdog entries to DT timer binding doc - -The watchdog has been reworked to use the same DT node as the timer. -This change is updating the device tree doc accordingly. - -Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> ---- - Documentation/devicetree/bindings/arm/msm/timer.txt | 16 +++++++++++++--- - 1 file changed, 13 insertions(+), 3 deletions(-) - ---- a/Documentation/devicetree/bindings/arm/msm/timer.txt -+++ b/Documentation/devicetree/bindings/arm/msm/timer.txt -@@ -9,11 +9,17 @@ Properties: - "qcom,scss-timer" - scorpion subsystem - - - interrupts : Interrupts for the debug timer, the first general purpose -- timer, and optionally a second general purpose timer in that -- order. -+ timer, and optionally a second general purpose timer, and -+ optionally as well, 2 watchdog interrupts, in that order. - - - reg : Specifies the base address of the timer registers. - -+- clocks: Reference to the parent clocks, one per output clock. The parents -+ must appear in the same order as the clock names. -+ -+- clock-names: The name of the clocks as free-form strings. They should be in -+ the same order as the clocks. -+ - - clock-frequency : The frequency of the debug timer and the general purpose - timer(s) in Hz in that order. - -@@ -29,9 +35,13 @@ Example: - compatible = "qcom,scss-timer", "qcom,msm-timer"; - interrupts = <1 1 0x301>, - <1 2 0x301>, -- <1 3 0x301>; -+ <1 3 0x301>, -+ <1 4 0x301>, -+ <1 5 0x301>; - reg = <0x0200a000 0x100>; - clock-frequency = <19200000>, - <32768>; -+ clocks = <&sleep_clk>; -+ clock-names = "sleep"; - cpu-offset = <0x40000>; - }; diff --git a/target/linux/ipq806x/patches-4.0/121-mfd-qcom_rpm-Add-support-for-IPQ8064.patch b/target/linux/ipq806x/patches-4.0/121-mfd-qcom_rpm-Add-support-for-IPQ8064.patch deleted file mode 100644 index e5e9e4e..0000000 --- a/target/linux/ipq806x/patches-4.0/121-mfd-qcom_rpm-Add-support-for-IPQ8064.patch +++ /dev/null @@ -1,71 +0,0 @@ -From 4d54b0adfa67476e6509bc8646b9dbac642e8a29 Mon Sep 17 00:00:00 2001 -From: Josh Cartwright <joshc@codeaurora.org> -Date: Thu, 26 Mar 2015 11:29:26 -0700 -Subject: [PATCH] mfd: qcom_rpm: Add support for IPQ8064 - -The IPQ8064 also includes an RPM following the same message structure as -other chips. In addition, it supports a few new resource types to -support the NSS fabric clocks and the SMB208/SMB209 regulators found on -the reference boards. - -Signed-off-by: Josh Cartwright <joshc@codeaurora.org> -Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> -Signed-off-by: Lee Jones <lee.jones@linaro.org> ---- - drivers/mfd/qcom_rpm.c | 41 +++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 41 insertions(+) - ---- a/drivers/mfd/qcom_rpm.c -+++ b/drivers/mfd/qcom_rpm.c -@@ -323,10 +323,51 @@ static const struct qcom_rpm_data msm896 - .n_resources = ARRAY_SIZE(msm8960_rpm_resource_table), - }; - -+static const struct qcom_rpm_resource ipq806x_rpm_resource_table[] = { -+ [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 }, -+ [QCOM_RPM_PXO_CLK] = { 26, 10, 6, 1 }, -+ [QCOM_RPM_APPS_FABRIC_CLK] = { 27, 11, 8, 1 }, -+ [QCOM_RPM_SYS_FABRIC_CLK] = { 28, 12, 9, 1 }, -+ [QCOM_RPM_NSS_FABRIC_0_CLK] = { 29, 13, 10, 1 }, -+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 30, 14, 11, 1 }, -+ [QCOM_RPM_SFPB_CLK] = { 31, 15, 12, 1 }, -+ [QCOM_RPM_CFPB_CLK] = { 32, 16, 13, 1 }, -+ [QCOM_RPM_NSS_FABRIC_1_CLK] = { 33, 17, 14, 1 }, -+ [QCOM_RPM_EBI1_CLK] = { 34, 18, 16, 1 }, -+ [QCOM_RPM_APPS_FABRIC_HALT] = { 35, 19, 18, 2 }, -+ [QCOM_RPM_APPS_FABRIC_MODE] = { 37, 20, 19, 3 }, -+ [QCOM_RPM_APPS_FABRIC_IOCTL] = { 40, 21, 20, 1 }, -+ [QCOM_RPM_APPS_FABRIC_ARB] = { 41, 22, 21, 12 }, -+ [QCOM_RPM_SYS_FABRIC_HALT] = { 53, 23, 22, 2 }, -+ [QCOM_RPM_SYS_FABRIC_MODE] = { 55, 24, 23, 3 }, -+ [QCOM_RPM_SYS_FABRIC_IOCTL] = { 58, 25, 24, 1 }, -+ [QCOM_RPM_SYS_FABRIC_ARB] = { 59, 26, 25, 30 }, -+ [QCOM_RPM_MM_FABRIC_HALT] = { 89, 27, 26, 2 }, -+ [QCOM_RPM_MM_FABRIC_MODE] = { 91, 28, 27, 3 }, -+ [QCOM_RPM_MM_FABRIC_IOCTL] = { 94, 29, 28, 1 }, -+ [QCOM_RPM_MM_FABRIC_ARB] = { 95, 30, 29, 2 }, -+ [QCOM_RPM_CXO_BUFFERS] = { 209, 33, 31, 1 }, -+ [QCOM_RPM_USB_OTG_SWITCH] = { 210, 34, 32, 1 }, -+ [QCOM_RPM_HDMI_SWITCH] = { 211, 35, 33, 1 }, -+ [QCOM_RPM_DDR_DMM] = { 212, 36, 34, 2 }, -+ [QCOM_RPM_VDDMIN_GPIO] = { 215, 40, 39, 1 }, -+ [QCOM_RPM_SMB208_S1a] = { 216, 41, 90, 2 }, -+ [QCOM_RPM_SMB208_S1b] = { 218, 43, 91, 2 }, -+ [QCOM_RPM_SMB208_S2a] = { 220, 45, 92, 2 }, -+ [QCOM_RPM_SMB208_S2b] = { 222, 47, 93, 2 }, -+}; -+ -+static const struct qcom_rpm_data ipq806x_template = { -+ .version = 3, -+ .resource_table = ipq806x_rpm_resource_table, -+ .n_resources = ARRAY_SIZE(ipq806x_rpm_resource_table), -+}; -+ - static const struct of_device_id qcom_rpm_of_match[] = { - { .compatible = "qcom,rpm-apq8064", .data = &apq8064_template }, - { .compatible = "qcom,rpm-msm8660", .data = &msm8660_template }, - { .compatible = "qcom,rpm-msm8960", .data = &msm8960_template }, -+ { .compatible = "qcom,rpm-ipq8064", .data = &ipq806x_template }, - { } - }; - MODULE_DEVICE_TABLE(of, qcom_rpm_of_match); diff --git a/target/linux/ipq806x/patches-4.0/123-mfd-devicetree-qcom_rpm-Document-IPQ8064-resources.patch b/target/linux/ipq806x/patches-4.0/123-mfd-devicetree-qcom_rpm-Document-IPQ8064-resources.patch deleted file mode 100644 index c8a9f3f..0000000 --- a/target/linux/ipq806x/patches-4.0/123-mfd-devicetree-qcom_rpm-Document-IPQ8064-resources.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 30bc3aa5c4ed3072bdff7d915772df1b91307ed4 Mon Sep 17 00:00:00 2001 -From: Josh Cartwright <joshc@codeaurora.org> -Date: Thu, 26 Mar 2015 11:29:25 -0700 -Subject: [PATCH] mfd: devicetree: qcom_rpm: Document IPQ8064 resources - -The IPQ8064 SoC has several RPM-controlled resources, an NSS fabrick -clock and four regulator resources. Provide definitions for them. - -Signed-off-by: Josh Cartwright <joshc@codeaurora.org> -[sboyd@codeaurora.org: Drop regulator part of binding] -Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> -Signed-off-by: Lee Jones <lee.jones@linaro.org> ---- - Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 1 + - include/dt-bindings/mfd/qcom-rpm.h | 6 ++++++ - 2 files changed, 7 insertions(+) - ---- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt -+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt -@@ -12,6 +12,7 @@ frequencies. - "qcom,rpm-apq8064" - "qcom,rpm-msm8660" - "qcom,rpm-msm8960" -+ "qcom,rpm-ipq8064" - - - reg: - Usage: required ---- a/include/dt-bindings/mfd/qcom-rpm.h -+++ b/include/dt-bindings/mfd/qcom-rpm.h -@@ -141,6 +141,12 @@ - #define QCOM_RPM_SYS_FABRIC_MODE 131 - #define QCOM_RPM_USB_OTG_SWITCH 132 - #define QCOM_RPM_VDDMIN_GPIO 133 -+#define QCOM_RPM_NSS_FABRIC_0_CLK 134 -+#define QCOM_RPM_NSS_FABRIC_1_CLK 135 -+#define QCOM_RPM_SMB208_S1a 136 -+#define QCOM_RPM_SMB208_S1b 137 -+#define QCOM_RPM_SMB208_S2a 138 -+#define QCOM_RPM_SMB208_S2b 139 - - /* - * Constants used to select force mode for regulators. diff --git a/target/linux/ipq806x/patches-4.0/706-net-stmmac-create-one-debugfs-dir-per-net-device.patch b/target/linux/ipq806x/patches-4.0/706-net-stmmac-create-one-debugfs-dir-per-net-device.patch deleted file mode 100644 index a9a2d55..0000000 --- a/target/linux/ipq806x/patches-4.0/706-net-stmmac-create-one-debugfs-dir-per-net-device.patch +++ /dev/null @@ -1,175 +0,0 @@ -From df944689d491e6af533173bf2ef448c3dd334f15 Mon Sep 17 00:00:00 2001 -From: Mathieu Olivari <mathieu@codeaurora.org> -Date: Mon, 11 May 2015 15:15:25 -0700 -Subject: [PATCH 6/8] net: stmmac: create one debugfs dir per net-device - -stmmac DebugFS entries are currently global to the driver. As a result, -having more than one stmmac device in the system creates the following -error: -* ERROR stmmaceth, debugfs create directory failed -* stmmac_hw_setup: failed debugFS registration - -This also results in being able to access the debugfs information for -the first registered device only. - -This patch changes the debugfs structure to have one sub-directory per -net-device. Files under "/sys/kernel/debug/stmmaceth" will now show-up -under /sys/kernel/debug/stmmaceth/ethN/. - -Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> ---- - drivers/net/ethernet/stmicro/stmmac/stmmac.h | 6 ++ - drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 76 ++++++++++++++++------- - 2 files changed, 59 insertions(+), 23 deletions(-) - ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h -@@ -116,6 +116,12 @@ struct stmmac_priv { - int use_riwt; - int irq_wake; - spinlock_t ptp_lock; -+ -+#ifdef CONFIG_DEBUG_FS -+ struct dentry *dbgfs_dir; -+ struct dentry *dbgfs_rings_status; -+ struct dentry *dbgfs_dma_cap; -+#endif - }; - - int stmmac_mdio_unregister(struct net_device *ndev); ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -@@ -119,7 +119,7 @@ static irqreturn_t stmmac_interrupt(int - - #ifdef CONFIG_DEBUG_FS - static int stmmac_init_fs(struct net_device *dev); --static void stmmac_exit_fs(void); -+static void stmmac_exit_fs(struct net_device *dev); - #endif - - #define STMMAC_COAL_TIMER(x) (jiffies + usecs_to_jiffies(x)) -@@ -1918,7 +1918,7 @@ static int stmmac_release(struct net_dev - netif_carrier_off(dev); - - #ifdef CONFIG_DEBUG_FS -- stmmac_exit_fs(); -+ stmmac_exit_fs(dev); - #endif - - stmmac_release_ptp(priv); -@@ -2510,8 +2510,6 @@ static int stmmac_ioctl(struct net_devic - - #ifdef CONFIG_DEBUG_FS - static struct dentry *stmmac_fs_dir; --static struct dentry *stmmac_rings_status; --static struct dentry *stmmac_dma_cap; - - static void sysfs_display_ring(void *head, int size, int extend_desc, - struct seq_file *seq) -@@ -2650,36 +2648,39 @@ static const struct file_operations stmm - - static int stmmac_init_fs(struct net_device *dev) - { -- /* Create debugfs entries */ -- stmmac_fs_dir = debugfs_create_dir(STMMAC_RESOURCE_NAME, NULL); -+ struct stmmac_priv *priv = netdev_priv(dev); -+ -+ /* Create per netdev entries */ -+ priv->dbgfs_dir = debugfs_create_dir(dev->name, stmmac_fs_dir); - -- if (!stmmac_fs_dir || IS_ERR(stmmac_fs_dir)) { -- pr_err("ERROR %s, debugfs create directory failed\n", -- STMMAC_RESOURCE_NAME); -+ if (!priv->dbgfs_dir || IS_ERR(priv->dbgfs_dir)) { -+ pr_err("ERROR %s/%s, debugfs create directory failed\n", -+ STMMAC_RESOURCE_NAME, dev->name); - - return -ENOMEM; - } - - /* Entry to report DMA RX/TX rings */ -- stmmac_rings_status = debugfs_create_file("descriptors_status", -- S_IRUGO, stmmac_fs_dir, dev, -- &stmmac_rings_status_fops); -+ priv->dbgfs_rings_status = -+ debugfs_create_file("descriptors_status", S_IRUGO, -+ priv->dbgfs_dir, dev, -+ &stmmac_rings_status_fops); - -- if (!stmmac_rings_status || IS_ERR(stmmac_rings_status)) { -+ if (!priv->dbgfs_rings_status || IS_ERR(priv->dbgfs_rings_status)) { - pr_info("ERROR creating stmmac ring debugfs file\n"); -- debugfs_remove(stmmac_fs_dir); -+ debugfs_remove_recursive(priv->dbgfs_dir); - - return -ENOMEM; - } - - /* Entry to report the DMA HW features */ -- stmmac_dma_cap = debugfs_create_file("dma_cap", S_IRUGO, stmmac_fs_dir, -- dev, &stmmac_dma_cap_fops); -+ priv->dbgfs_dma_cap = debugfs_create_file("dma_cap", S_IRUGO, -+ priv->dbgfs_dir, -+ dev, &stmmac_dma_cap_fops); - -- if (!stmmac_dma_cap || IS_ERR(stmmac_dma_cap)) { -+ if (!priv->dbgfs_dma_cap || IS_ERR(priv->dbgfs_dma_cap)) { - pr_info("ERROR creating stmmac MMC debugfs file\n"); -- debugfs_remove(stmmac_rings_status); -- debugfs_remove(stmmac_fs_dir); -+ debugfs_remove_recursive(priv->dbgfs_dir); - - return -ENOMEM; - } -@@ -2687,11 +2688,11 @@ static int stmmac_init_fs(struct net_dev - return 0; - } - --static void stmmac_exit_fs(void) -+static void stmmac_exit_fs(struct net_device *dev) - { -- debugfs_remove(stmmac_rings_status); -- debugfs_remove(stmmac_dma_cap); -- debugfs_remove(stmmac_fs_dir); -+ struct stmmac_priv *priv = netdev_priv(dev); -+ -+ debugfs_remove_recursive(priv->dbgfs_dir); - } - #endif /* CONFIG_DEBUG_FS */ - -@@ -3136,6 +3137,35 @@ err: - __setup("stmmaceth=", stmmac_cmdline_opt); - #endif /* MODULE */ - -+static int __init stmmac_init(void) -+{ -+#ifdef CONFIG_DEBUG_FS -+ /* Create debugfs main directory if it doesn't exist yet */ -+ if (stmmac_fs_dir == NULL) { -+ stmmac_fs_dir = debugfs_create_dir(STMMAC_RESOURCE_NAME, NULL); -+ -+ if (!stmmac_fs_dir || IS_ERR(stmmac_fs_dir)) { -+ pr_err("ERROR %s, debugfs create directory failed\n", -+ STMMAC_RESOURCE_NAME); -+ -+ return -ENOMEM; -+ } -+ } -+#endif -+ -+ return 0; -+} -+ -+static void __exit stmmac_exit(void) -+{ -+#ifdef CONFIG_DEBUG_FS -+ debugfs_remove_recursive(stmmac_fs_dir); -+#endif -+} -+ -+module_init(stmmac_init) -+module_exit(stmmac_exit) -+ - MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet device driver"); - MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>"); - MODULE_LICENSE("GPL"); diff --git a/target/linux/ipq806x/patches-4.0/020-add-ap148-bootargs.patch b/target/linux/ipq806x/patches-4.1/020-add-ap148-bootargs.patch index a61481e..c0ad74c 100644 --- a/target/linux/ipq806x/patches-4.0/020-add-ap148-bootargs.patch +++ b/target/linux/ipq806x/patches-4.1/020-add-ap148-bootargs.patch @@ -17,27 +17,27 @@ i2c4_pins: i2c4_pinmux { --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -140,7 +140,7 @@ - ranges; - status = "disabled"; +@@ -159,7 +159,7 @@ + + syscon-tcsr = <&tcsr>; - serial@12490000 { + uart2: serial@12490000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x12490000 0x1000>, <0x12480000 0x1000>; -@@ -175,7 +175,7 @@ - ranges; - status = "disabled"; +@@ -197,7 +197,7 @@ + + syscon-tcsr = <&tcsr>; - serial@16340000 { + uart4: serial@16340000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16340000 0x1000>, <0x16300000 0x1000>; -@@ -209,7 +209,7 @@ - ranges; - status = "disabled"; +@@ -234,7 +234,7 @@ + + syscon-tcsr = <&tcsr>; - serial@1a240000 { + uart5: serial@1a240000 { diff --git a/target/linux/ipq806x/patches-4.0/021-add-ap148-partitions.patch b/target/linux/ipq806x/patches-4.1/021-add-ap148-partitions.patch index 34eb9c0..34eb9c0 100644 --- a/target/linux/ipq806x/patches-4.0/021-add-ap148-partitions.patch +++ b/target/linux/ipq806x/patches-4.1/021-add-ap148-partitions.patch diff --git a/target/linux/ipq806x/patches-4.0/022-add-db149-dts.patch b/target/linux/ipq806x/patches-4.1/022-add-db149-dts.patch index 29631b2..7d8c8e8 100644 --- a/target/linux/ipq806x/patches-4.0/022-add-db149-dts.patch +++ b/target/linux/ipq806x/patches-4.1/022-add-db149-dts.patch @@ -15,7 +15,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -438,6 +438,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ +@@ -451,6 +451,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ qcom-ipq8064-ap148.dtb \ diff --git a/target/linux/ipq806x/patches-4.0/023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch b/target/linux/ipq806x/patches-4.1/023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch index 75595ca..6b29637 100644 --- a/target/linux/ipq806x/patches-4.0/023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch +++ b/target/linux/ipq806x/patches-4.1/023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch @@ -24,7 +24,7 @@ gsbi5: gsbi@1a200000 { --- a/drivers/clk/qcom/gcc-ipq806x.c +++ b/drivers/clk/qcom/gcc-ipq806x.c -@@ -805,7 +805,7 @@ static struct clk_rcg gsbi7_qup_src = { +@@ -807,7 +807,7 @@ static struct clk_rcg gsbi7_qup_src = { .parent_names = gcc_pxo_pll8, .num_parents = 2, .ops = &clk_rcg_ops, @@ -33,7 +33,7 @@ }, }, }; -@@ -821,7 +821,7 @@ static struct clk_branch gsbi7_qup_clk = +@@ -823,7 +823,7 @@ static struct clk_branch gsbi7_qup_clk = .parent_names = (const char *[]){ "gsbi7_qup_src" }, .num_parents = 1, .ops = &clk_branch_ops, @@ -42,7 +42,7 @@ }, }, }; -@@ -869,7 +869,7 @@ static struct clk_branch gsbi4_h_clk = { +@@ -871,7 +871,7 @@ static struct clk_branch gsbi4_h_clk = { .hw.init = &(struct clk_init_data){ .name = "gsbi4_h_clk", .ops = &clk_branch_ops, diff --git a/target/linux/ipq806x/patches-4.0/110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch b/target/linux/ipq806x/patches-4.1/110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch index 41f91fa..41f91fa 100644 --- a/target/linux/ipq806x/patches-4.0/110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch +++ b/target/linux/ipq806x/patches-4.1/110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch diff --git a/target/linux/ipq806x/patches-4.0/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch b/target/linux/ipq806x/patches-4.1/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch index b64b759..dbf16a3 100644 --- a/target/linux/ipq806x/patches-4.0/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch +++ b/target/linux/ipq806x/patches-4.1/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch @@ -34,7 +34,7 @@ MAINTAINERS | 7 + --- a/MAINTAINERS +++ b/MAINTAINERS -@@ -7511,6 +7511,13 @@ L: linux-pci@vger.kernel.org +@@ -7599,6 +7599,13 @@ L: linux-pci@vger.kernel.org S: Maintained F: drivers/pci/host/*spear* @@ -50,9 +50,9 @@ MAINTAINERS | 7 + L: linux-pcmcia@lists.infradead.org --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig -@@ -106,4 +106,13 @@ config PCI_VERSATILE - bool "ARM Versatile PB PCI controller" - depends on ARCH_VERSATILE +@@ -125,4 +125,13 @@ config PCIE_IPROC_PLATFORM + Say Y here if you want to use the Broadcom iProc PCIe controller + through the generic platform bus interface +config PCIE_QCOM + bool "Qualcomm PCIe controller" @@ -746,8 +746,8 @@ MAINTAINERS | 7 + +MODULE_ALIAS("platform:qcom-pcie"); --- a/drivers/pci/host/Makefile +++ b/drivers/pci/host/Makefile -@@ -13,3 +13,4 @@ obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx - obj-$(CONFIG_PCI_XGENE) += pci-xgene.o - obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o +@@ -15,3 +15,4 @@ obj-$(CONFIG_PCI_LAYERSCAPE) += pci-laye obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o + obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o + obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o +obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o diff --git a/target/linux/ipq806x/patches-4.0/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch index 957b054..e7de2bb 100644 --- a/target/linux/ipq806x/patches-4.0/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch +++ b/target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch @@ -120,20 +120,19 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> }; --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -3,6 +3,8 @@ - #include "skeleton.dtsi" +@@ -4,6 +4,8 @@ #include <dt-bindings/clock/qcom,gcc-ipq806x.h> + #include <dt-bindings/clock/qcom,lcc-ipq806x.h> #include <dt-bindings/soc/qcom,gsbi.h> +#include <dt-bindings/reset/qcom,gcc-ipq806x.h> +#include <include/dt-bindings/interrupt-controller/arm-gic.h> / { model = "Qualcomm IPQ8064"; -@@ -291,5 +293,128 @@ - #clock-cells = <1>; +@@ -329,5 +331,128 @@ #reset-cells = <1>; }; -+ + + pcie0: pci@1b500000 { + compatible = "qcom,pcie-v0"; + reg = <0x1b500000 0x1000 @@ -256,5 +255,6 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> + + status = "disabled"; + }; ++ }; }; diff --git a/target/linux/ipq806x/patches-4.0/113-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch b/target/linux/ipq806x/patches-4.1/113-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch index e2d3135..e2d3135 100644 --- a/target/linux/ipq806x/patches-4.0/113-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch +++ b/target/linux/ipq806x/patches-4.1/113-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch diff --git a/target/linux/ipq806x/patches-4.0/126-add-rpm-to-ipq8064-dts.patch b/target/linux/ipq806x/patches-4.1/126-add-rpm-to-ipq8064-dts.patch index 4fb62dd..be80f4c 100644 --- a/target/linux/ipq806x/patches-4.0/126-add-rpm-to-ipq8064-dts.patch +++ b/target/linux/ipq806x/patches-4.1/126-add-rpm-to-ipq8064-dts.patch @@ -5,12 +5,12 @@ #include "skeleton.dtsi" #include <dt-bindings/clock/qcom,gcc-ipq806x.h> +#include <dt-bindings/mfd/qcom-rpm.h> + #include <dt-bindings/clock/qcom,lcc-ipq806x.h> #include <dt-bindings/soc/qcom,gsbi.h> #include <dt-bindings/reset/qcom,gcc-ipq806x.h> - #include <include/dt-bindings/interrupt-controller/arm-gic.h> -@@ -76,6 +77,63 @@ - ranges; - compatible = "simple-bus"; +@@ -92,6 +93,63 @@ + reg-names = "lpass-lpaif"; + }; + rpm@108000 { + compatible = "qcom,rpm-ipq8064"; @@ -72,7 +72,7 @@ qcom_pinmux: pinmux@800000 { compatible = "qcom,ipq8064-pinctrl"; reg = <0x800000 0x4000>; -@@ -120,6 +178,12 @@ +@@ -136,6 +194,12 @@ reg = <0x02098000 0x1000>, <0x02008000 0x1000>; }; @@ -81,7 +81,7 @@ + reg = <0x2011000 0x1000>; + clock-output-names = "acpu_l2_aux"; + }; -+ ++ saw0: regulator@2089000 { compatible = "qcom,saw2"; reg = <0x02089000 0x1000>, <0x02009000 0x1000>; diff --git a/target/linux/ipq806x/patches-4.0/133-ARM-Add-Krait-L2-register-accessor-functions.patch b/target/linux/ipq806x/patches-4.1/133-ARM-Add-Krait-L2-register-accessor-functions.patch index 36a92c8..36a92c8 100644 --- a/target/linux/ipq806x/patches-4.0/133-ARM-Add-Krait-L2-register-accessor-functions.patch +++ b/target/linux/ipq806x/patches-4.1/133-ARM-Add-Krait-L2-register-accessor-functions.patch diff --git a/target/linux/ipq806x/patches-4.0/134-clk-mux-Split-out-register-accessors-for-reuse.patch b/target/linux/ipq806x/patches-4.1/134-clk-mux-Split-out-register-accessors-for-reuse.patch index 3a475fb..3a475fb 100644 --- a/target/linux/ipq806x/patches-4.0/134-clk-mux-Split-out-register-accessors-for-reuse.patch +++ b/target/linux/ipq806x/patches-4.1/134-clk-mux-Split-out-register-accessors-for-reuse.patch diff --git a/target/linux/ipq806x/patches-4.0/135-clk-Avoid-sending-high-rates-to-downstream-clocks-during-set_rate.patch b/target/linux/ipq806x/patches-4.1/135-clk-Avoid-sending-high-rates-to-downstream-clocks-during-set_rate.patch index 52af413..8063860 100644 --- a/target/linux/ipq806x/patches-4.0/135-clk-Avoid-sending-high-rates-to-downstream-clocks-during-set_rate.patch +++ b/target/linux/ipq806x/patches-4.1/135-clk-Avoid-sending-high-rates-to-downstream-clocks-during-set_rate.patch @@ -47,7 +47,7 @@ drivers/clk/clk.c | 34 ++++++++++++++++++++++------------ --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c -@@ -1696,21 +1696,24 @@ static struct clk_core *clk_propagate_ra +@@ -1743,21 +1743,24 @@ static struct clk_core *clk_propagate_ra * walk down a subtree and set the new rates notifying the rate * change on the way */ @@ -79,16 +79,16 @@ drivers/clk/clk.c | 34 ++++++++++++++++++++++------------ if (clk->new_parent && clk->new_parent != clk->parent) { old_parent = __clk_set_parent_before(clk, clk->new_parent); -@@ -1730,7 +1733,7 @@ static void clk_change_rate(struct clk_c - if (!skip_set_rate && clk->ops->set_rate) - clk->ops->set_rate(clk->hw, clk->new_rate, best_parent_rate); +@@ -1783,7 +1786,7 @@ static void clk_change_rate(struct clk_c + + trace_clk_set_rate_complete(clk, clk->new_rate); - clk->rate = clk_recalc(clk, best_parent_rate); + clk->rate = clk->new_rate; if (clk->notifier_count && old_rate != clk->rate) __clk_notify(clk, POST_RATE_CHANGE, old_rate, clk->rate); -@@ -1743,12 +1746,13 @@ static void clk_change_rate(struct clk_c +@@ -1796,12 +1799,13 @@ static void clk_change_rate(struct clk_c /* Skip children who will be reparented to another clock */ if (child->new_parent && child->new_parent != clk) continue; @@ -105,7 +105,7 @@ drivers/clk/clk.c | 34 ++++++++++++++++++++++------------ } static int clk_core_set_rate_nolock(struct clk_core *clk, -@@ -1757,6 +1761,7 @@ static int clk_core_set_rate_nolock(stru +@@ -1810,6 +1814,7 @@ static int clk_core_set_rate_nolock(stru struct clk_core *top, *fail_clk; unsigned long rate = req_rate; int ret = 0; @@ -113,7 +113,7 @@ drivers/clk/clk.c | 34 ++++++++++++++++++++++------------ if (!clk) return 0; -@@ -1782,8 +1787,13 @@ static int clk_core_set_rate_nolock(stru +@@ -1835,8 +1840,13 @@ static int clk_core_set_rate_nolock(stru return -EBUSY; } diff --git a/target/linux/ipq806x/patches-4.0/136-clk-Add-safe-switch-hook.patch b/target/linux/ipq806x/patches-4.1/136-clk-Add-safe-switch-hook.patch index a5d9c41..0cf4eb3 100644 --- a/target/linux/ipq806x/patches-4.0/136-clk-Add-safe-switch-hook.patch +++ b/target/linux/ipq806x/patches-4.1/136-clk-Add-safe-switch-hook.patch @@ -47,7 +47,7 @@ handles that problem on Krait, but on other platforms it won't work. struct clk_core *new_parent; struct clk_core *new_child; unsigned long flags; -@@ -1557,7 +1560,8 @@ out: +@@ -1595,7 +1598,8 @@ out: static void clk_calc_subtree(struct clk_core *clk, unsigned long new_rate, struct clk_core *new_parent, u8 p_index) { @@ -57,7 +57,7 @@ handles that problem on Krait, but on other platforms it won't work. clk->new_rate = new_rate; clk->new_parent = new_parent; -@@ -1567,6 +1571,18 @@ static void clk_calc_subtree(struct clk_ +@@ -1605,6 +1609,18 @@ static void clk_calc_subtree(struct clk_ if (new_parent && new_parent != clk->parent) new_parent->new_child = clk; @@ -76,7 +76,7 @@ handles that problem on Krait, but on other platforms it won't work. hlist_for_each_entry(child, &clk->children, child_node) { child->new_rate = clk_recalc(child, new_rate); clk_calc_subtree(child, child->new_rate, NULL, 0); -@@ -1662,14 +1678,43 @@ static struct clk_core *clk_propagate_ra +@@ -1709,14 +1725,43 @@ static struct clk_core *clk_propagate_ra unsigned long event) { struct clk_core *child, *tmp_clk, *fail_clk = NULL; @@ -123,7 +123,7 @@ handles that problem on Krait, but on other platforms it won't work. fail_clk = clk; } -@@ -1715,7 +1760,8 @@ clk_change_rate(struct clk_core *clk, un +@@ -1762,7 +1807,8 @@ clk_change_rate(struct clk_core *clk, un old_rate = clk->rate; @@ -131,9 +131,9 @@ handles that problem on Krait, but on other platforms it won't work. + if (clk->new_parent && clk->new_parent != clk->parent && + !clk->safe_parent) { old_parent = __clk_set_parent_before(clk, clk->new_parent); + trace_clk_set_parent(clk, clk->new_parent); - if (clk->ops->set_rate_and_parent) { -@@ -1735,9 +1781,6 @@ clk_change_rate(struct clk_core *clk, un +@@ -1788,9 +1834,6 @@ clk_change_rate(struct clk_core *clk, un clk->rate = clk->new_rate; @@ -143,7 +143,7 @@ handles that problem on Krait, but on other platforms it won't work. /* * Use safe iteration, as change_rate can actually swap parents * for certain clock types. -@@ -1797,6 +1840,8 @@ static int clk_core_set_rate_nolock(stru +@@ -1850,6 +1893,8 @@ static int clk_core_set_rate_nolock(stru clk->req_rate = req_rate; diff --git a/target/linux/ipq806x/patches-4.0/137-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch b/target/linux/ipq806x/patches-4.1/137-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch index 6fad6e8..6fad6e8 100644 --- a/target/linux/ipq806x/patches-4.0/137-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch +++ b/target/linux/ipq806x/patches-4.1/137-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch diff --git a/target/linux/ipq806x/patches-4.0/138-clk-qcom-Add-HFPLL-driver.patch b/target/linux/ipq806x/patches-4.1/138-clk-qcom-Add-HFPLL-driver.patch index b1f870a..4056784 100644 --- a/target/linux/ipq806x/patches-4.0/138-clk-qcom-Add-HFPLL-driver.patch +++ b/target/linux/ipq806x/patches-4.1/138-clk-qcom-Add-HFPLL-driver.patch @@ -73,7 +73,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> + }; --- a/drivers/clk/qcom/Kconfig +++ b/drivers/clk/qcom/Kconfig -@@ -88,3 +88,11 @@ config MSM_MMCC_8974 +@@ -97,3 +97,11 @@ config MSM_MMCC_8974 Support for the multimedia clock controller on msm8974 devices. Say Y if you want to support multimedia devices such as display, graphics, video encode/decode, camera, etc. @@ -87,7 +87,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> + such as MSM8974, APQ8084, etc. --- a/drivers/clk/qcom/Makefile +++ b/drivers/clk/qcom/Makefile -@@ -21,3 +21,4 @@ obj-$(CONFIG_MSM_LCC_8960) += lcc-msm896 +@@ -22,3 +22,4 @@ obj-$(CONFIG_MSM_LCC_8960) += lcc-msm896 obj-$(CONFIG_MSM_GCC_8974) += gcc-msm8974.o obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o diff --git a/target/linux/ipq806x/patches-4.0/139-clk-qcom-Add-IPQ806X-s-HFPLLs.patch b/target/linux/ipq806x/patches-4.1/139-clk-qcom-Add-IPQ806X-s-HFPLLs.patch index d341006..ffcd462 100644 --- a/target/linux/ipq806x/patches-4.0/139-clk-qcom-Add-IPQ806X-s-HFPLLs.patch +++ b/target/linux/ipq806x/patches-4.1/139-clk-qcom-Add-IPQ806X-s-HFPLLs.patch @@ -115,10 +115,10 @@ drivers/clk/qcom/gcc-ipq806x.c | 83 ++++++++++++++++++++++++++++++++++++++++++ static struct clk_pll pll14 = { .l_reg = 0x31c4, .m_reg = 0x31c8, -@@ -2273,6 +2353,9 @@ static struct clk_regmap *gcc_ipq806x_cl - [USB_FS1_XCVR_SRC] = &usb_fs1_xcvr_clk_src.clkr, - [USB_FS1_XCVR_CLK] = &usb_fs1_xcvr_clk.clkr, +@@ -2307,6 +2387,9 @@ static struct clk_regmap *gcc_ipq806x_cl [USB_FS1_SYSTEM_CLK] = &usb_fs1_sys_clk.clkr, + [EBI2_CLK] = &ebi2_clk.clkr, + [EBI2_AON_CLK] = &ebi2_aon_clk.clkr, + [PLL9] = &hfpll0.clkr, + [PLL10] = &hfpll1.clkr, + [PLL12] = &hfpll_l2.clkr, diff --git a/target/linux/ipq806x/patches-4.0/140-clk-qcom-Add-support-for-Krait-clocks.patch b/target/linux/ipq806x/patches-4.1/140-clk-qcom-Add-support-for-Krait-clocks.patch index cef33c8..5fcc787 100644 --- a/target/linux/ipq806x/patches-4.0/140-clk-qcom-Add-support-for-Krait-clocks.patch +++ b/target/linux/ipq806x/patches-4.1/140-clk-qcom-Add-support-for-Krait-clocks.patch @@ -30,7 +30,7 @@ drivers/clk/qcom/Kconfig | 4 ++ --- a/drivers/clk/qcom/Kconfig +++ b/drivers/clk/qcom/Kconfig -@@ -96,3 +96,7 @@ config QCOM_HFPLL +@@ -105,3 +105,7 @@ config QCOM_HFPLL Support for the high-frequency PLLs present on Qualcomm devices. Say Y if you want to support CPU frequency scaling on devices such as MSM8974, APQ8084, etc. diff --git a/target/linux/ipq806x/patches-4.0/141-clk-qcom-Add-KPSS-ACC-GCC-driver.patch b/target/linux/ipq806x/patches-4.1/141-clk-qcom-Add-KPSS-ACC-GCC-driver.patch index 12f24b7..db43888 100644 --- a/target/linux/ipq806x/patches-4.0/141-clk-qcom-Add-KPSS-ACC-GCC-driver.patch +++ b/target/linux/ipq806x/patches-4.1/141-clk-qcom-Add-KPSS-ACC-GCC-driver.patch @@ -82,7 +82,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> + }; --- a/drivers/clk/qcom/Kconfig +++ b/drivers/clk/qcom/Kconfig -@@ -97,6 +97,14 @@ config QCOM_HFPLL +@@ -106,6 +106,14 @@ config QCOM_HFPLL Say Y if you want to support CPU frequency scaling on devices such as MSM8974, APQ8084, etc. @@ -99,7 +99,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> select KRAIT_L2_ACCESSORS --- a/drivers/clk/qcom/Makefile +++ b/drivers/clk/qcom/Makefile -@@ -22,4 +22,5 @@ obj-$(CONFIG_MSM_LCC_8960) += lcc-msm896 +@@ -23,4 +23,5 @@ obj-$(CONFIG_MSM_LCC_8960) += lcc-msm896 obj-$(CONFIG_MSM_GCC_8974) += gcc-msm8974.o obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o diff --git a/target/linux/ipq806x/patches-4.0/142-clk-qcom-Add-Krait-clock-controller-driver.patch b/target/linux/ipq806x/patches-4.1/142-clk-qcom-Add-Krait-clock-controller-driver.patch index 159facd..59fc44f 100644 --- a/target/linux/ipq806x/patches-4.0/142-clk-qcom-Add-Krait-clock-controller-driver.patch +++ b/target/linux/ipq806x/patches-4.1/142-clk-qcom-Add-Krait-clock-controller-driver.patch @@ -56,7 +56,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> + }; --- a/drivers/clk/qcom/Kconfig +++ b/drivers/clk/qcom/Kconfig -@@ -105,6 +105,14 @@ config KPSS_XCC +@@ -114,6 +114,14 @@ config KPSS_XCC if you want to support CPU frequency scaling on devices such as MSM8960, APQ8064, etc. @@ -73,7 +73,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> select KRAIT_L2_ACCESSORS --- a/drivers/clk/qcom/Makefile +++ b/drivers/clk/qcom/Makefile -@@ -24,3 +24,4 @@ obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8 +@@ -25,3 +25,4 @@ obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8 obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o obj-$(CONFIG_QCOM_HFPLL) += hfpll.o diff --git a/target/linux/ipq806x/patches-4.0/143-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch b/target/linux/ipq806x/patches-4.1/143-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch index 57d4afe..fd37c05 100644 --- a/target/linux/ipq806x/patches-4.0/143-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch +++ b/target/linux/ipq806x/patches-4.1/143-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch @@ -69,7 +69,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> + }; --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm -@@ -137,6 +137,15 @@ config ARM_OMAP2PLUS_CPUFREQ +@@ -146,6 +146,15 @@ config ARM_OMAP2PLUS_CPUFREQ depends on ARCH_OMAP2PLUS default ARCH_OMAP2PLUS @@ -87,7 +87,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> help --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile -@@ -65,6 +65,7 @@ obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += ki +@@ -66,6 +66,7 @@ obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += ki obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o diff --git a/target/linux/ipq806x/patches-4.0/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch b/target/linux/ipq806x/patches-4.1/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch index a3c3bbf..46feec3 100644 --- a/target/linux/ipq806x/patches-4.0/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch +++ b/target/linux/ipq806x/patches-4.1/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch @@ -1,6 +1,6 @@ --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -24,6 +24,11 @@ +@@ -25,6 +25,11 @@ next-level-cache = <&L2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; @@ -12,7 +12,7 @@ }; cpu@1 { -@@ -34,11 +39,24 @@ +@@ -35,11 +40,24 @@ next-level-cache = <&L2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; @@ -37,7 +37,7 @@ }; }; -@@ -71,6 +89,46 @@ +@@ -195,6 +213,46 @@ }; }; @@ -84,7 +84,7 @@ soc: soc { #address-cells = <1>; #size-cells = <1>; -@@ -171,11 +229,13 @@ +@@ -310,11 +368,13 @@ acc0: clock-controller@2088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; diff --git a/target/linux/ipq806x/patches-4.0/145-cpufreq-Add-a-cpufreq-krait-based-on-cpufre.patch b/target/linux/ipq806x/patches-4.1/145-cpufreq-Add-a-cpufreq-krait-based-on-cpufre.patch index 521adc5..521adc5 100644 --- a/target/linux/ipq806x/patches-4.0/145-cpufreq-Add-a-cpufreq-krait-based-on-cpufre.patch +++ b/target/linux/ipq806x/patches-4.1/145-cpufreq-Add-a-cpufreq-krait-based-on-cpufre.patch diff --git a/target/linux/ipq806x/patches-4.0/300-arch-arm-force-ZRELADDR-on-arch-qcom.patch b/target/linux/ipq806x/patches-4.1/300-arch-arm-force-ZRELADDR-on-arch-qcom.patch index 930a463..51ebc19 100644 --- a/target/linux/ipq806x/patches-4.0/300-arch-arm-force-ZRELADDR-on-arch-qcom.patch +++ b/target/linux/ipq806x/patches-4.1/300-arch-arm-force-ZRELADDR-on-arch-qcom.patch @@ -33,7 +33,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig -@@ -314,7 +314,7 @@ config ARCH_MULTIPLATFORM +@@ -320,7 +320,7 @@ config ARCH_MULTIPLATFORM select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_HAS_SG_CHAIN select ARM_PATCH_PHYS_VIRT @@ -44,7 +44,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> select GENERIC_CLOCKEVENTS --- a/arch/arm/Makefile +++ b/arch/arm/Makefile -@@ -241,9 +241,11 @@ MACHINE := arch/arm/mach-$(word 1,$(mac +@@ -240,9 +240,11 @@ MACHINE := arch/arm/mach-$(word 1,$(mac else MACHINE := endif diff --git a/target/linux/ipq806x/patches-4.0/700-clk-qcom-Add-support-for-NSS-GMAC-clocks-and-resets.patch b/target/linux/ipq806x/patches-4.1/700-clk-qcom-Add-support-for-NSS-GMAC-clocks-and-resets.patch index 1b9d47b..dfe7169 100644 --- a/target/linux/ipq806x/patches-4.0/700-clk-qcom-Add-support-for-NSS-GMAC-clocks-and-resets.patch +++ b/target/linux/ipq806x/patches-4.1/700-clk-qcom-Add-support-for-NSS-GMAC-clocks-and-resets.patch @@ -16,7 +16,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> --- a/drivers/clk/qcom/gcc-ipq806x.c +++ b/drivers/clk/qcom/gcc-ipq806x.c -@@ -220,11 +220,46 @@ static struct clk_regmap pll14_vote = { +@@ -220,12 +220,47 @@ static struct clk_regmap pll14_vote = { }, }; @@ -53,26 +53,27 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> + }, +}; + - #define P_PXO 0 - #define P_PLL8 1 - #define P_PLL3 1 - #define P_PLL0 2 - #define P_CXO 2 -+#define P_PLL14 3 -+#define P_PLL18 4 + enum { + P_PXO, + P_PLL8, + P_PLL3, + P_PLL0, + P_CXO, ++ P_PLL14, ++ P_PLL18, + }; - static const u8 gcc_pxo_pll8_map[] = { - [P_PXO] = 0, -@@ -275,6 +310,22 @@ static const char *gcc_pxo_pll8_pll0_map + static const struct parent_map gcc_pxo_pll8_map[] = { +@@ -277,6 +312,22 @@ static const char *gcc_pxo_pll8_pll0_map "pll0_vote", }; -+static const u8 gcc_pxo_pll8_pll14_pll18_pll0_map[] = { -+ [P_PXO] = 0 , -+ [P_PLL8] = 4, -+ [P_PLL0] = 2, -+ [P_PLL14] = 5, -+ [P_PLL18] = 1, ++static const struct parent_map gcc_pxo_pll8_pll14_pll18_pll0_map[] = { ++ { P_PXO, 0 }, ++ { P_PLL8, 4 }, ++ { P_PLL0, 2 }, ++ { P_PLL14, 5 }, ++ { P_PLL18, 1 }, +}; + +static const char *gcc_pxo_pll8_pll14_pll18_pll0[] = { @@ -86,7 +87,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> static struct freq_tbl clk_tbl_gsbi_uart[] = { { 1843200, P_PLL8, 2, 6, 625 }, { 3686400, P_PLL8, 2, 12, 625 }, -@@ -2250,6 +2301,472 @@ static struct clk_branch usb_fs1_h_clk = +@@ -2282,6 +2333,472 @@ static struct clk_branch ebi2_aon_clk = }, }; @@ -559,7 +560,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> static struct clk_regmap *gcc_ipq806x_clks[] = { [PLL0] = &pll0.clkr, [PLL0_VOTE] = &pll0_vote, -@@ -2259,6 +2776,7 @@ static struct clk_regmap *gcc_ipq806x_cl +@@ -2291,6 +2808,7 @@ static struct clk_regmap *gcc_ipq806x_cl [PLL8_VOTE] = &pll8_vote, [PLL14] = &pll14.clkr, [PLL14_VOTE] = &pll14_vote, @@ -567,7 +568,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [GSBI1_UART_SRC] = &gsbi1_uart_src.clkr, [GSBI1_UART_CLK] = &gsbi1_uart_clk.clkr, [GSBI2_UART_SRC] = &gsbi2_uart_src.clkr, -@@ -2356,6 +2874,18 @@ static struct clk_regmap *gcc_ipq806x_cl +@@ -2390,6 +2908,18 @@ static struct clk_regmap *gcc_ipq806x_cl [PLL9] = &hfpll0.clkr, [PLL10] = &hfpll1.clkr, [PLL12] = &hfpll_l2.clkr, @@ -586,7 +587,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> }; static const struct qcom_reset_map gcc_ipq806x_resets[] = { -@@ -2474,6 +3004,48 @@ static const struct qcom_reset_map gcc_i +@@ -2508,6 +3038,48 @@ static const struct qcom_reset_map gcc_i [USB30_1_PHY_RESET] = { 0x3b58, 0 }, [NSSFB0_RESET] = { 0x3b60, 6 }, [NSSFB1_RESET] = { 0x3b60, 7 }, @@ -635,7 +636,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> }; static const struct regmap_config gcc_ipq806x_regmap_config = { -@@ -2502,6 +3074,8 @@ static int gcc_ipq806x_probe(struct plat +@@ -2536,6 +3108,8 @@ static int gcc_ipq806x_probe(struct plat { struct clk *clk; struct device *dev = &pdev->dev; @@ -644,7 +645,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> /* Temporary until RPM clocks supported */ clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 25000000); -@@ -2512,7 +3086,25 @@ static int gcc_ipq806x_probe(struct plat +@@ -2546,7 +3120,25 @@ static int gcc_ipq806x_probe(struct plat if (IS_ERR(clk)) return PTR_ERR(clk); @@ -671,16 +672,6 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> } static int gcc_ipq806x_remove(struct platform_device *pdev) ---- a/include/dt-bindings/clock/qcom,gcc-ipq806x.h -+++ b/include/dt-bindings/clock/qcom,gcc-ipq806x.h -@@ -288,5 +288,7 @@ - #define UBI32_CORE2_CLK_SRC 278 - #define UBI32_CORE1_CLK 279 - #define UBI32_CORE2_CLK 280 -+#define NSSTCM_CLK_SRC 281 -+#define NSSTCM_CLK 282 - - #endif --- a/include/dt-bindings/reset/qcom,gcc-ipq806x.h +++ b/include/dt-bindings/reset/qcom,gcc-ipq806x.h @@ -129,4 +129,47 @@ @@ -731,3 +722,13 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> +#define NSS_SRDS_N_RESET 156 + #endif +--- a/include/dt-bindings/clock/qcom,gcc-ipq806x.h ++++ b/include/dt-bindings/clock/qcom,gcc-ipq806x.h +@@ -289,5 +289,7 @@ + #define UBI32_CORE1_CLK 279 + #define UBI32_CORE2_CLK 280 + #define EBI2_AON_CLK 281 ++#define NSSTCM_CLK_SRC 282 ++#define NSSTCM_CLK 283 + + #endif diff --git a/target/linux/ipq806x/patches-4.0/701-stmmac-add-phy-handle-support-to-the-platform-layer.patch b/target/linux/ipq806x/patches-4.1/701-stmmac-add-phy-handle-support-to-the-platform-layer.patch index e94a746..3711e12 100644 --- a/target/linux/ipq806x/patches-4.0/701-stmmac-add-phy-handle-support-to-the-platform-layer.patch +++ b/target/linux/ipq806x/patches-4.1/701-stmmac-add-phy-handle-support-to-the-platform-layer.patch @@ -67,7 +67,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> pr_err("%s: Could not attach to PHY\n", dev->name); --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -@@ -27,6 +27,7 @@ +@@ -28,6 +28,7 @@ #include <linux/of.h> #include <linux/of_net.h> #include <linux/of_device.h> @@ -75,7 +75,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> #include "stmmac.h" #include "stmmac_platform.h" -@@ -167,13 +168,16 @@ static int stmmac_probe_config_dt(struct +@@ -168,13 +169,16 @@ static int stmmac_probe_config_dt(struct /* Default to phy auto-detection */ plat->phy_addr = -1; diff --git a/target/linux/ipq806x/patches-4.0/702-stmmac-move-error-path-at-the-end-of-stmmac_probe_co.patch b/target/linux/ipq806x/patches-4.1/702-stmmac-move-error-path-at-the-end-of-stmmac_probe_co.patch index 3b2134e..37f1002 100644 --- a/target/linux/ipq806x/patches-4.0/702-stmmac-move-error-path-at-the-end-of-stmmac_probe_co.patch +++ b/target/linux/ipq806x/patches-4.1/702-stmmac-move-error-path-at-the-end-of-stmmac_probe_co.patch @@ -17,7 +17,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -@@ -129,13 +129,18 @@ static int stmmac_probe_config_dt(struct +@@ -130,13 +130,18 @@ static int stmmac_probe_config_dt(struct struct device_node *np = pdev->dev.of_node; struct stmmac_dma_cfg *dma_cfg; const struct of_device_id *device; @@ -40,7 +40,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> if (device->data) { const struct stmmac_of_data *data = device->data; -@@ -231,8 +236,10 @@ static int stmmac_probe_config_dt(struct +@@ -236,8 +241,10 @@ static int stmmac_probe_config_dt(struct if (of_find_property(np, "snps,pbl", NULL)) { dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg), GFP_KERNEL); @@ -53,7 +53,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> plat->dma_cfg = dma_cfg; of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl); dma_cfg->fixed_burst = -@@ -250,6 +257,9 @@ static int stmmac_probe_config_dt(struct +@@ -255,6 +262,9 @@ static int stmmac_probe_config_dt(struct } return 0; diff --git a/target/linux/ipq806x/patches-4.0/703-stmmac-add-fixed-link-device-tree-support.patch b/target/linux/ipq806x/patches-4.1/703-stmmac-add-fixed-link-device-tree-support.patch index 4b2c9b5..a05875b 100644 --- a/target/linux/ipq806x/patches-4.0/703-stmmac-add-fixed-link-device-tree-support.patch +++ b/target/linux/ipq806x/patches-4.1/703-stmmac-add-fixed-link-device-tree-support.patch @@ -29,7 +29,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> } --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -@@ -176,6 +176,14 @@ static int stmmac_probe_config_dt(struct +@@ -177,6 +177,14 @@ static int stmmac_probe_config_dt(struct /* If we find a phy-handle property, use it as the PHY */ plat->phy_node = of_parse_phandle(np, "phy-handle", 0); @@ -44,7 +44,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> /* "snps,phy-addr" is not a standard property. Mark it as deprecated * and warn of its use. Remove this when phy node support is added. */ -@@ -238,7 +246,7 @@ static int stmmac_probe_config_dt(struct +@@ -243,7 +251,7 @@ static int stmmac_probe_config_dt(struct GFP_KERNEL); if (!dma_cfg) { ret = -ENOMEM; @@ -53,7 +53,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> } plat->dma_cfg = dma_cfg; of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl); -@@ -258,6 +266,8 @@ static int stmmac_probe_config_dt(struct +@@ -263,6 +271,8 @@ static int stmmac_probe_config_dt(struct return 0; diff --git a/target/linux/ipq806x/patches-4.0/704-stmmac-add-ipq806x-glue-layer.patch b/target/linux/ipq806x/patches-4.1/704-stmmac-add-ipq806x-glue-layer.patch index fecc958..7fd72be 100644 --- a/target/linux/ipq806x/patches-4.0/704-stmmac-add-ipq806x-glue-layer.patch +++ b/target/linux/ipq806x/patches-4.1/704-stmmac-add-ipq806x-glue-layer.patch @@ -42,7 +42,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> stmmac-pci-objs:= stmmac_pci.o --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -@@ -42,6 +42,7 @@ static const struct of_device_id stmmac_ +@@ -43,6 +43,7 @@ static const struct of_device_id stmmac_ { .compatible = "st,stid127-dwmac", .data = &stid127_dwmac_data}, { .compatible = "st,stih407-dwmac", .data = &stih4xx_dwmac_data}, { .compatible = "altr,socfpga-stmmac", .data = &socfpga_gmac_data }, diff --git a/target/linux/ipq806x/patches-4.0/705-net-stmmac-ipq806x-document-device-tree-bindings.patch b/target/linux/ipq806x/patches-4.1/705-net-stmmac-ipq806x-document-device-tree-bindings.patch index 3144fa3..3144fa3 100644 --- a/target/linux/ipq806x/patches-4.0/705-net-stmmac-ipq806x-document-device-tree-bindings.patch +++ b/target/linux/ipq806x/patches-4.1/705-net-stmmac-ipq806x-document-device-tree-bindings.patch diff --git a/target/linux/ipq806x/patches-4.0/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch b/target/linux/ipq806x/patches-4.1/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch index 20d8502..20d8502 100644 --- a/target/linux/ipq806x/patches-4.0/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch +++ b/target/linux/ipq806x/patches-4.1/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch diff --git a/target/linux/ipq806x/patches-4.0/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-4.1/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch index 6a14f9f..de68678 100644 --- a/target/linux/ipq806x/patches-4.0/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch +++ b/target/linux/ipq806x/patches-4.1/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch @@ -116,11 +116,10 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> }; --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -540,5 +540,91 @@ - +@@ -578,5 +578,91 @@ status = "disabled"; }; -+ + + nss_common: syscon@03000000 { + compatible = "syscon"; + reg = <0x03000000 0x0000FFFF>; @@ -206,5 +205,6 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> + + status = "disabled"; + }; ++ }; }; |