summaryrefslogtreecommitdiff
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/brcm47xx/patches-3.0/0028-bcma-scan-for-extra-address-space.patch60
-rw-r--r--target/linux/brcm47xx/patches-3.0/0029-bcma-add-function-to-check-every-10-s-if-a-reg-is-se.patch115
-rw-r--r--target/linux/brcm47xx/patches-3.0/0030-USB-OHCI-Add-a-generic-platform-device-driver.patch291
-rw-r--r--target/linux/brcm47xx/patches-3.0/0031-USB-EHCI-Add-a-generic-platform-device-driver.patch265
-rw-r--r--target/linux/brcm47xx/patches-3.0/0032-USB-Add-driver-for-the-bcma-bus.patch347
-rw-r--r--target/linux/brcm47xx/patches-3.0/0033-USB-Add-driver-for-the-ssb-bus.patch321
-rw-r--r--target/linux/brcm47xx/patches-3.0/0034-USB-OHCI-remove-old-SSB-OHCI-driver.patch357
-rw-r--r--target/linux/brcm47xx/patches-3.0/022-USB-Add-ehci-ssb-driver.patch330
-rw-r--r--target/linux/brcm47xx/patches-3.0/023-usb_ehci_ohci.patch188
-rw-r--r--target/linux/brcm47xx/patches-3.0/280-activate_ssb_support_in_usb.patch15
10 files changed, 1768 insertions, 521 deletions
diff --git a/target/linux/brcm47xx/patches-3.0/0028-bcma-scan-for-extra-address-space.patch b/target/linux/brcm47xx/patches-3.0/0028-bcma-scan-for-extra-address-space.patch
new file mode 100644
index 0000000..d74dfcb
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0028-bcma-scan-for-extra-address-space.patch
@@ -0,0 +1,60 @@
+From 1735daf1db79d338dccfc55444b52ed52af79e86 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 20 Nov 2011 18:22:35 +0100
+Subject: [PATCH 15/21] bcma: scan for extra address space
+
+Some cores like the USB core have two address spaces. In the USB host
+controller one address space is used for the OHCI and the other for the
+EHCI controller interface. The USB controller is the only core I found
+with two address spaces. This code is based on the AI scan function
+ai_scan() in shared/aiutils.c i the Broadcom SDK.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/scan.c | 17 ++++++++++++++++-
+ include/linux/bcma/bcma.h | 1 +
+ 2 files changed, 17 insertions(+), 1 deletions(-)
+
+--- a/drivers/bcma/scan.c
++++ b/drivers/bcma/scan.c
+@@ -286,6 +286,21 @@ static int bcma_get_next_core(struct bcm
+ return -EILSEQ;
+ }
+
++
++ /* First Slave Address Descriptor should be port 0:
++ * the main register space for the core
++ */
++ tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0);
++ if (tmp < 0) {
++ /* Try again to see if it is a bridge */
++ tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_BRIDGE, 0);
++ if (tmp) {
++ printk("found bridge\n");
++ }
++
++ }
++ core->addr = tmp;
++
+ /* get & parse slave ports */
+ for (i = 0; i < ports[1]; i++) {
+ for (j = 0; ; j++) {
+@@ -298,7 +313,7 @@ static int bcma_get_next_core(struct bcm
+ break;
+ } else {
+ if (i == 0 && j == 0)
+- core->addr = tmp;
++ core->addr1 = tmp;
+ }
+ }
+ }
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -138,6 +138,7 @@ struct bcma_device {
+ u8 core_index;
+
+ u32 addr;
++ u32 addr1;
+ u32 wrap;
+
+ void __iomem *io_addr;
diff --git a/target/linux/brcm47xx/patches-3.0/0029-bcma-add-function-to-check-every-10-s-if-a-reg-is-se.patch b/target/linux/brcm47xx/patches-3.0/0029-bcma-add-function-to-check-every-10-s-if-a-reg-is-se.patch
new file mode 100644
index 0000000..2c0462f
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0029-bcma-add-function-to-check-every-10-s-if-a-reg-is-se.patch
@@ -0,0 +1,115 @@
+From 6e8ae6e2cee0e7e5939dc7042584c808366e61e0 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 27 Nov 2011 14:01:01 +0100
+Subject: [PATCH 16/21] =?UTF-8?q?bcma:=20add=20function=20to=20check=20every?=
+ =?UTF-8?q?=2010=20=C2=B5s=20if=20a=20reg=20is=20set?=
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This function checks if a reg get set or cleared every 10 microseconds.
+It is used in bcma_core_set_clockmode() and bcma_core_pll_ctl() to
+reduce code duplication. In addition it is needed in the USB host
+driver.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/core.c | 48 ++++++++++++++++++++++++++++----------------
+ include/linux/bcma/bcma.h | 2 +
+ 2 files changed, 32 insertions(+), 18 deletions(-)
+
+--- a/drivers/bcma/core.c
++++ b/drivers/bcma/core.c
+@@ -51,11 +51,36 @@ int bcma_core_enable(struct bcma_device
+ }
+ EXPORT_SYMBOL_GPL(bcma_core_enable);
+
++/* Wait for bitmask in a register to get set or cleared.
++ * timeout is in units of ten-microseconds.
++ */
++int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask, int timeout,
++ int set)
++{
++ int i;
++ u32 val;
++
++ for (i = 0; i < timeout; i++) {
++ val = bcma_read32(dev, reg);
++ if (set) {
++ if ((val & bitmask) == bitmask)
++ return 0;
++ } else {
++ if (!(val & bitmask))
++ return 0;
++ }
++ udelay(10);
++ }
++ pr_err("Timeout waiting for bitmask %08X on register %04X to %s.\n",
++ bitmask, reg, (set ? "set" : "clear"));
++
++ return -ETIMEDOUT;
++}
++EXPORT_SYMBOL_GPL(bcma_wait_bits);
++
+ void bcma_core_set_clockmode(struct bcma_device *core,
+ enum bcma_clkmode clkmode)
+ {
+- u16 i;
+-
+ WARN_ON(core->id.id != BCMA_CORE_CHIPCOMMON &&
+ core->id.id != BCMA_CORE_PCIE &&
+ core->id.id != BCMA_CORE_80211);
+@@ -64,15 +89,8 @@ void bcma_core_set_clockmode(struct bcma
+ case BCMA_CLKMODE_FAST:
+ bcma_set32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT);
+ udelay(64);
+- for (i = 0; i < 1500; i++) {
+- if (bcma_read32(core, BCMA_CLKCTLST) &
+- BCMA_CLKCTLST_HAVEHT) {
+- i = 0;
+- break;
+- }
+- udelay(10);
+- }
+- if (i)
++ if (bcma_wait_bits(core, BCMA_CLKCTLST, BCMA_CLKCTLST_HAVEHT,
++ 1500, 1))
+ pr_err("HT force timeout\n");
+ break;
+ case BCMA_CLKMODE_DYNAMIC:
+@@ -84,22 +102,12 @@ EXPORT_SYMBOL_GPL(bcma_core_set_clockmod
+
+ void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status, bool on)
+ {
+- u16 i;
+-
+ WARN_ON(req & ~BCMA_CLKCTLST_EXTRESREQ);
+ WARN_ON(status & ~BCMA_CLKCTLST_EXTRESST);
+
+ if (on) {
+ bcma_set32(core, BCMA_CLKCTLST, req);
+- for (i = 0; i < 10000; i++) {
+- if ((bcma_read32(core, BCMA_CLKCTLST) & status) ==
+- status) {
+- i = 0;
+- break;
+- }
+- udelay(10);
+- }
+- if (i)
++ if (bcma_wait_bits(core, BCMA_CLKCTLST, status, 10000, 1))
+ pr_err("PLL enable timeout\n");
+ } else {
+ pr_warn("Disabling PLL not supported yet!\n");
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -283,6 +283,9 @@ static inline void bcma_maskset16(struct
+ bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set);
+ }
+
++extern int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask,
++ int timeout, int set);
++
+ extern bool bcma_core_is_enabled(struct bcma_device *core);
+ extern void bcma_core_disable(struct bcma_device *core, u32 flags);
+ extern int bcma_core_enable(struct bcma_device *core, u32 flags);
diff --git a/target/linux/brcm47xx/patches-3.0/0030-USB-OHCI-Add-a-generic-platform-device-driver.patch b/target/linux/brcm47xx/patches-3.0/0030-USB-OHCI-Add-a-generic-platform-device-driver.patch
new file mode 100644
index 0000000..51b112a
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0030-USB-OHCI-Add-a-generic-platform-device-driver.patch
@@ -0,0 +1,291 @@
+From b39adeae5b06e40699c174ed78ca7c45b8d7976f Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 26 Nov 2011 21:20:54 +0100
+Subject: [PATCH 17/21] USB: OHCI: Add a generic platform device driver
+
+This adds a generic driver for platform devices. It works like the PCI
+driver and is based on it. This is for devices which do not have an own
+bus but their OHCI controller works like a PCI controller. It will be
+used for the Broadcom bcma and ssb USB OHCI controller.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/Kconfig | 10 ++
+ drivers/usb/host/ohci-hcd.c | 21 ++++-
+ drivers/usb/host/ohci-platform.c | 197 ++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 227 insertions(+), 1 deletions(-)
+ create mode 100644 drivers/usb/host/ohci-platform.c
+
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -378,6 +378,16 @@ config USB_CNS3XXX_OHCI
+ Enable support for the CNS3XXX SOC's on-chip OHCI controller.
+ It is needed for low-speed USB 1.0 device support.
+
++config USB_OHCI_HCD_PLATFORM
++ bool "OHCI driver for a platform device"
++ depends on USB_OHCI_HCD && EXPERIMENTAL
++ default n
++ ---help---
++ Adds an OHCI host driver for a generic platform device, which
++ provieds a memory space and an irq.
++
++ If unsure, say N.
++
+ config USB_OHCI_BIG_ENDIAN_DESC
+ bool
+ depends on USB_OHCI_HCD
+--- a/drivers/usb/host/ohci-hcd.c
++++ b/drivers/usb/host/ohci-hcd.c
+@@ -1114,6 +1114,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER ohci_hcd_ath79_driver
+ #endif
+
++#ifdef CONFIG_USB_OHCI_HCD_PLATFORM
++#include "ohci-platform.c"
++#define PLATFORM_OHCI_DRIVER ohci_platform_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && \
+ !defined(PLATFORM_DRIVER) && \
+ !defined(OMAP1_PLATFORM_DRIVER) && \
+@@ -1123,7 +1128,8 @@ MODULE_LICENSE ("GPL");
+ !defined(PS3_SYSTEM_BUS_DRIVER) && \
+ !defined(SM501_OHCI_DRIVER) && \
+ !defined(TMIO_OHCI_DRIVER) && \
+- !defined(SSB_OHCI_DRIVER)
++ !defined(SSB_OHCI_DRIVER) && \
++ !defined(PLATFORM_OHCI_DRIVER)
+ #error "missing bus glue for ohci-hcd"
+ #endif
+
+@@ -1207,9 +1213,19 @@ static int __init ohci_hcd_mod_init(void
+ goto error_tmio;
+ #endif
+
++#ifdef PLATFORM_OHCI_DRIVER
++ retval = platform_driver_register(&PLATFORM_OHCI_DRIVER);
++ if (retval)
++ goto error_platform;
++#endif
++
+ return retval;
+
+ /* Error path */
++#ifdef PLATFORM_OHCI_DRIVER
++ platform_driver_unregister(&PLATFORM_OHCI_DRIVER);
++ error_platform:
++#endif
+ #ifdef TMIO_OHCI_DRIVER
+ platform_driver_unregister(&TMIO_OHCI_DRIVER);
+ error_tmio:
+@@ -1263,6 +1279,9 @@ module_init(ohci_hcd_mod_init);
+
+ static void __exit ohci_hcd_mod_exit(void)
+ {
++#ifdef PLATFORM_OHCI_DRIVER
++ platform_driver_unregister(&PLATFORM_OHCI_DRIVER);
++#endif
+ #ifdef TMIO_OHCI_DRIVER
+ platform_driver_unregister(&TMIO_OHCI_DRIVER);
+ #endif
+--- /dev/null
++++ b/drivers/usb/host/ohci-platform.c
+@@ -0,0 +1,197 @@
++/*
++ * Generic platform ohci driver
++ *
++ * Copyright 2007 Michael Buesch <m@bues.ch>
++ * Copyright 2011 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Derived from the OHCI-PCI driver
++ * Copyright 1999 Roman Weissgaerber
++ * Copyright 2000-2002 David Brownell
++ * Copyright 1999 Linus Torvalds
++ * Copyright 1999 Gregory P. Smith
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++#include <linux/platform_device.h>
++
++static int ohci_platform_reset(struct usb_hcd *hcd)
++{
++ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
++ int err;
++
++ ohci_hcd_init(ohci);
++ err = ohci_init(ohci);
++
++ return err;
++}
++
++static int ohci_platform_start(struct usb_hcd *hcd)
++{
++ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
++ int err;
++
++ err = ohci_run(ohci);
++ if (err < 0) {
++ ohci_err(ohci, "can't start\n");
++ ohci_stop(hcd);
++ }
++
++ return err;
++}
++
++static const struct hc_driver ohci_platform_hc_driver = {
++ .description = "platform-usb-ohci",
++ .product_desc = "Generic Platform OHCI Controller",
++ .hcd_priv_size = sizeof(struct ohci_hcd),
++
++ .irq = ohci_irq,
++ .flags = HCD_MEMORY | HCD_USB11,
++
++ .reset = ohci_platform_reset,
++ .start = ohci_platform_start,
++ .stop = ohci_stop,
++ .shutdown = ohci_shutdown,
++
++ .urb_enqueue = ohci_urb_enqueue,
++ .urb_dequeue = ohci_urb_dequeue,
++ .endpoint_disable = ohci_endpoint_disable,
++
++ .get_frame_number = ohci_get_frame,
++
++ .hub_status_data = ohci_hub_status_data,
++ .hub_control = ohci_hub_control,
++#ifdef CONFIG_PM
++ .bus_suspend = ohci_bus_suspend,
++ .bus_resume = ohci_bus_resume,
++#endif
++
++ .start_port_reset = ohci_start_port_reset,
++};
++
++static int ohci_platform_attach(struct platform_device *dev)
++{
++ struct usb_hcd *hcd;
++ struct resource *res_irq, *res_mem;
++ int err = -ENOMEM;
++
++ hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
++ dev_name(&dev->dev));
++ if (!hcd)
++ goto err_return;
++
++ res_irq = platform_get_resource(dev, IORESOURCE_IRQ, 0);
++ if (!res_irq) {
++ err = -ENXIO;
++ goto err_return;
++ }
++ res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
++ if (!res_mem) {
++ err = -ENXIO;
++ goto err_return;
++ }
++ hcd->rsrc_start = res_mem->start;
++ hcd->rsrc_len = res_mem->end - res_mem->start + 1;
++
++ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
++ if (!hcd->regs)
++ goto err_put_hcd;
++ err = usb_add_hcd(hcd, res_irq->start, IRQF_SHARED);
++ if (err)
++ goto err_iounmap;
++
++ platform_set_drvdata(dev, hcd);
++
++ return err;
++
++err_iounmap:
++ iounmap(hcd->regs);
++err_put_hcd:
++ usb_put_hcd(hcd);
++err_return:
++ return err;
++}
++
++static int ohci_platform_probe(struct platform_device *dev)
++{
++ int err;
++
++ if (usb_disabled())
++ return -ENODEV;
++
++ /* We currently always attach BCMA_DEV_USB11_HOSTDEV
++ * as HOST OHCI. If we want to attach it as Client device,
++ * we must branch here and call into the (yet to
++ * be written) Client mode driver. Same for remove(). */
++
++ err = ohci_platform_attach(dev);
++
++ return err;
++}
++
++static int ohci_platform_remove(struct platform_device *dev)
++{
++ struct usb_hcd *hcd;
++
++ hcd = platform_get_drvdata(dev);
++ if (!hcd)
++ return -ENODEV;
++
++ usb_remove_hcd(hcd);
++ iounmap(hcd->regs);
++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++ usb_put_hcd(hcd);
++
++ return 0;
++}
++
++static void ohci_platform_shutdown(struct platform_device *dev)
++{
++ struct usb_hcd *hcd;
++
++ hcd = platform_get_drvdata(dev);
++ if (!hcd)
++ return;
++
++ if (hcd->driver->shutdown)
++ hcd->driver->shutdown(hcd);
++}
++
++#ifdef CONFIG_PM
++
++static int ohci_platform_suspend(struct platform_device *dev,
++ pm_message_t state)
++{
++
++ return 0;
++}
++
++static int ohci_platform_resume(struct platform_device *dev)
++{
++ struct usb_hcd *hcd = platform_get_drvdata(dev);
++
++ ohci_finish_controller_resume(hcd);
++ return 0;
++}
++
++#else /* !CONFIG_PM */
++#define ohci_platform_suspend NULL
++#define ohci_platform_resume NULL
++#endif /* CONFIG_PM */
++
++static const struct platform_device_id ohci_platform_table[] = {
++ { "ohci-platform", 0 },
++ { }
++};
++MODULE_DEVICE_TABLE(platform, ohci_platform_table);
++
++static struct platform_driver ohci_platform_driver = {
++ .id_table = ohci_platform_table,
++ .probe = ohci_platform_probe,
++ .remove = ohci_platform_remove,
++ .shutdown = ohci_platform_shutdown,
++ .suspend = ohci_platform_suspend,
++ .resume = ohci_platform_resume,
++ .driver = {
++ .name = "ohci-platform",
++ }
++};
diff --git a/target/linux/brcm47xx/patches-3.0/0031-USB-EHCI-Add-a-generic-platform-device-driver.patch b/target/linux/brcm47xx/patches-3.0/0031-USB-EHCI-Add-a-generic-platform-device-driver.patch
new file mode 100644
index 0000000..43cf86a
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0031-USB-EHCI-Add-a-generic-platform-device-driver.patch
@@ -0,0 +1,265 @@
+From aa05e0048cec25719921291e8749674b8cc66fc0 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 26 Nov 2011 21:28:56 +0100
+Subject: [PATCH 18/21] USB: EHCI: Add a generic platform device driver
+
+This adds a generic driver for platform devices. It works like the PCI
+driver and is based on it. This is for devices which do not have an own
+bus but their EHCI controller works like a PCI controller. It will be
+used for the Broadcom bcma and ssb USB EHCI controller.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/Kconfig | 10 ++
+ drivers/usb/host/ehci-hcd.c | 5 +
+ drivers/usb/host/ehci-platform.c | 211 ++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 226 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/usb/host/ehci-platform.c
+
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -388,6 +388,16 @@ config USB_OHCI_HCD_PLATFORM
+
+ If unsure, say N.
+
++config USB_EHCI_HCD_PLATFORM
++ bool "Generic EHCI driver for a platform device"
++ depends on USB_EHCI_HCD && EXPERIMENTAL
++ default n
++ ---help---
++ Adds an EHCI host driver for a generic platform device, which
++ provieds a memory space and an irq.
++
++ If unsure, say N.
++
+ config USB_OHCI_BIG_ENDIAN_DESC
+ bool
+ depends on USB_OHCI_HCD
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -1312,6 +1312,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER ehci_grlib_driver
+ #endif
+
++#ifdef CONFIG_USB_EHCI_HCD_PLATFORM
++#include "ehci-platform.c"
++#define PLATFORM_DRIVER ehci_platform_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
+ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
+ !defined(XILINX_OF_PLATFORM_DRIVER)
+--- /dev/null
++++ b/drivers/usb/host/ehci-platform.c
+@@ -0,0 +1,211 @@
++/*
++ * Generic platform ehci driver
++ *
++ * Copyright 2007 Steven Brown <sbrown@cortland.com>
++ * Copyright 2010-2011 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Derived from the ohci-ssb driver
++ * Copyright 2007 Michael Buesch <mb@bu3sch.de>
++ *
++ * Derived from the EHCI-PCI driver
++ * Copyright (c) 2000-2004 by David Brownell
++ *
++ * Derived from the ohci-pci driver
++ * Copyright 1999 Roman Weissgaerber
++ * Copyright 2000-2002 David Brownell
++ * Copyright 1999 Linus Torvalds
++ * Copyright 1999 Gregory P. Smith
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++#include <linux/platform_device.h>
++
++static int ehci_platform_reset(struct usb_hcd *hcd)
++{
++ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
++ int retval;
++
++ ehci->caps = hcd->regs;
++ ehci->regs = hcd->regs +
++ HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
++
++ dbg_hcs_params(ehci, "reset");
++ dbg_hcc_params(ehci, "reset");
++
++ /* cache this readonly data; minimize chip reads */
++ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
++
++ retval = ehci_halt(ehci);
++ if (retval)
++ return retval;
++
++ /* data structure init */
++ retval = ehci_init(hcd);
++ if (retval)
++ return retval;
++
++ ehci_reset(ehci);
++
++ ehci_port_power(ehci, 1);
++
++ return retval;
++}
++
++static const struct hc_driver ehci_platform_hc_driver = {
++ .description = "platform-usb-ehci",
++ .product_desc = "Generic Platform EHCI Controller",
++ .hcd_priv_size = sizeof(struct ehci_hcd),
++
++ .irq = ehci_irq,
++ .flags = HCD_MEMORY | HCD_USB2,
++
++ .reset = ehci_platform_reset,
++ .start = ehci_run,
++ .stop = ehci_stop,
++ .shutdown = ehci_shutdown,
++
++ .urb_enqueue = ehci_urb_enqueue,
++ .urb_dequeue = ehci_urb_dequeue,
++ .endpoint_disable = ehci_endpoint_disable,
++ .endpoint_reset = ehci_endpoint_reset,
++
++ .get_frame_number = ehci_get_frame,
++
++ .hub_status_data = ehci_hub_status_data,
++ .hub_control = ehci_hub_control,
++#if defined(CONFIG_PM)
++ .bus_suspend = ehci_bus_suspend,
++ .bus_resume = ehci_bus_resume,
++#endif
++ .relinquish_port = ehci_relinquish_port,
++ .port_handed_over = ehci_port_handed_over,
++
++ .update_device = ehci_update_device,
++
++ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
++};
++
++static int ehci_platform_attach(struct platform_device *dev)
++{
++ struct usb_hcd *hcd;
++ struct resource *res_irq, *res_mem;
++ int err = -ENOMEM;
++
++ hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev,
++ dev_name(&dev->dev));
++ if (!hcd)
++ goto err_return;
++
++ res_irq = platform_get_resource(dev, IORESOURCE_IRQ, 0);
++ if (!res_irq) {
++ err = -ENXIO;
++ goto err_return;
++ }
++ res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
++ if (!res_mem) {
++ err = -ENXIO;
++ goto err_return;
++ }
++ hcd->rsrc_start = res_mem->start;
++ hcd->rsrc_len = res_mem->end - res_mem->start + 1;
++
++ /*
++ * start & size modified per sbutils.c
++ */
++ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
++ if (!hcd->regs)
++ goto err_put_hcd;
++ err = usb_add_hcd(hcd, res_irq->start, IRQF_SHARED);
++ if (err)
++ goto err_iounmap;
++
++ platform_set_drvdata(dev, hcd);
++
++ return err;
++
++err_iounmap:
++ iounmap(hcd->regs);
++err_put_hcd:
++ usb_put_hcd(hcd);
++err_return:
++ return err;
++}
++
++static int ehci_platform_probe(struct platform_device *dev)
++{
++ int err;
++
++ if (usb_disabled())
++ return -ENODEV;
++
++ err = ehci_platform_attach(dev);
++
++ return err;
++}
++
++static int ehci_platform_remove(struct platform_device *dev)
++{
++ struct usb_hcd *hcd;
++
++ hcd = platform_get_drvdata(dev);
++ if (!hcd)
++ return -ENODEV;
++
++ usb_remove_hcd(hcd);
++ iounmap(hcd->regs);
++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++ usb_put_hcd(hcd);
++
++ return 0;
++}
++
++static void ehci_platform_shutdown(struct platform_device *dev)
++{
++ struct usb_hcd *hcd;
++
++ hcd = platform_get_drvdata(dev);
++ if (!hcd)
++ return;
++
++ if (hcd->driver->shutdown)
++ hcd->driver->shutdown(hcd);
++}
++
++#ifdef CONFIG_PM
++
++static int ehci_platform_suspend(struct platform_device *dev,
++ pm_message_t state)
++{
++ return 0;
++}
++
++static int ehci_platform_resume(struct platform_device *dev)
++{
++ struct usb_hcd *hcd = platform_get_drvdata(dev);
++
++ ehci_finish_controller_resume(hcd);
++ return 0;
++}
++
++#else /* !CONFIG_PM */
++#define ehci_platform_suspend NULL
++#define ehci_platform_resume NULL
++#endif /* CONFIG_PM */
++
++static const struct platform_device_id ehci_platform_table[] = {
++ { "ehci-platform", 0 },
++ { }
++};
++MODULE_DEVICE_TABLE(platform, ehci_platform_table);
++
++static struct platform_driver ehci_platform_driver = {
++ .id_table = ehci_platform_table,
++ .probe = ehci_platform_probe,
++ .remove = ehci_platform_remove,
++ .shutdown = ehci_platform_shutdown,
++ .suspend = ehci_platform_suspend,
++ .resume = ehci_platform_resume,
++ .driver = {
++ .name = "ehci-platform",
++ }
++};
diff --git a/target/linux/brcm47xx/patches-3.0/0032-USB-Add-driver-for-the-bcma-bus.patch b/target/linux/brcm47xx/patches-3.0/0032-USB-Add-driver-for-the-bcma-bus.patch
new file mode 100644
index 0000000..3a35ac8
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0032-USB-Add-driver-for-the-bcma-bus.patch
@@ -0,0 +1,347 @@
+From 7151c34627b938486008cfab25bfb4e4f730a021 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 26 Nov 2011 21:33:41 +0100
+Subject: [PATCH 19/21] USB: Add driver for the bcma bus
+
+This adds a USB driver using the generic platform device driver for the
+USB controller found on the Broadcom bcma bus. The bcma bus just
+exposes one device which serves the OHCI and the EHCI controller at the
+same time. This driver probes for this USB controller and creates and
+registers two new platform devices which will be probed by the new
+generic platform device driver. This makes it possible to use the EHCI
+and the OCHI controller on the bcma bus at the same time.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/Kconfig | 12 ++
+ drivers/usb/host/Makefile | 1 +
+ drivers/usb/host/bcma-hcd.c | 350 +++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 363 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/usb/host/bcma-hcd.c
+
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -598,3 +598,15 @@ config USB_OCTEON_OHCI
+ config USB_OCTEON2_COMMON
+ bool
+ default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI
++
++config USB_HCD_BCMA
++ tristate "BCMA usb host driver"
++ depends on BCMA && EXPERIMENTAL
++ select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
++ select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
++ help
++ Enbale support for the EHCI and OCHI host controller on an bcma bus.
++ It converts the bcma driver into two platform device drivers
++ for ehci and ohci.
++
++ If unsure, say N.
+--- a/drivers/usb/host/Makefile
++++ b/drivers/usb/host/Makefile
+@@ -35,3 +35,4 @@ obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o
+ obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o
+ obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o
+ obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
++obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o
+--- /dev/null
++++ b/drivers/usb/host/bcma-hcd.c
+@@ -0,0 +1,298 @@
++/*
++ * Broadcom specific Advanced Microcontroller Bus
++ * Broadcom USB-core driver (BCMA bus glue)
++ *
++ * Copyright 2011 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Based on ssb-ohci driver
++ * Copyright 2007 Michael Buesch <m@bues.ch>
++ *
++ * Derived from the OHCI-PCI driver
++ * Copyright 1999 Roman Weissgaerber
++ * Copyright 2000-2002 David Brownell
++ * Copyright 1999 Linus Torvalds
++ * Copyright 1999 Gregory P. Smith
++ *
++ * Derived from the USBcore related parts of Broadcom-SB
++ * Copyright 2005-2011 Broadcom Corporation
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++#include <linux/bcma/bcma.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/module.h>
++
++MODULE_AUTHOR("Hauke Mehrtens");
++MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
++MODULE_LICENSE("GPL");
++
++#define BCMA_CORE_SIZE 0x1000
++
++struct bcma_hcd_device {
++ struct platform_device *ehci_dev;
++ struct platform_device *ohci_dev;
++};
++
++/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
++static void bcma_hcd_init_chip(struct bcma_device *dev)
++{
++ u32 tmp;
++
++ /*
++ * USB 2.0 special considerations:
++ *
++ * 1. Since the core supports both OHCI and EHCI functions, it must
++ * only be reset once.
++ *
++ * 2. In addition to the standard SI reset sequence, the Host Control
++ * Register must be programmed to bring the USB core and various
++ * phy components out of reset.
++ */
++ if (!bcma_core_is_enabled(dev)) {
++ bcma_core_enable(dev, 0);
++ mdelay(10);
++ if (dev->id.rev >= 5) {
++ /* Enable Misc PLL */
++ tmp = bcma_read32(dev, 0x1e0);
++ tmp |= 0x100;
++ bcma_write32(dev, 0x1e0, tmp);
++ if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100, 0))
++ printk(KERN_EMERG "Failed to enable misc PPL!\n");
++
++ /* Take out of resets */
++ bcma_write32(dev, 0x200, 0x4ff);
++ udelay(25);
++ bcma_write32(dev, 0x200, 0x6ff);
++ udelay(25);
++
++ /* Make sure digital and AFE are locked in USB PHY */
++ bcma_write32(dev, 0x524, 0x6b);
++ udelay(50);
++ tmp = bcma_read32(dev, 0x524);
++ udelay(50);
++ bcma_write32(dev, 0x524, 0xab);
++ udelay(50);
++ tmp = bcma_read32(dev, 0x524);
++ udelay(50);
++ bcma_write32(dev, 0x524, 0x2b);
++ udelay(50);
++ tmp = bcma_read32(dev, 0x524);
++ udelay(50);
++ bcma_write32(dev, 0x524, 0x10ab);
++ udelay(50);
++ tmp = bcma_read32(dev, 0x524);
++
++ if (bcma_wait_bits(dev, 0x528, 0xc000, 10000, 1))
++ printk(KERN_EMERG
++ "USB20H mdio_rddata 0x%08x\n", tmp);
++
++ bcma_write32(dev, 0x528, 0x80000000);
++ tmp = bcma_read32(dev, 0x314);
++ udelay(265);
++ bcma_write32(dev, 0x200, 0x7ff);
++ udelay(10);
++
++ /* Take USB and HSIC out of non-driving modes */
++ bcma_write32(dev, 0x510, 0);
++ } else {
++ bcma_write32(dev, 0x200, 0x7ff);
++
++ udelay(1);
++ }
++ }
++#ifdef CONFIG_BCMA_DRIVER_MIPS
++ /* Work around for 4716 failures. */
++ if (dev->bus->chipinfo.id == 0x4716) {
++ u32 clk_freq;
++
++ clk_freq = bcma_cpu_clock(&dev->bus->drv_mips);
++ if (clk_freq >= 480000000)
++ tmp = 0x1846b; /* set CDR to 0x11(fast) */
++ else if (clk_freq == 453000000)
++ tmp = 0x1046b; /* set CDR to 0x10(slow) */
++ else
++ tmp = 0;
++
++ /* Change Shim mdio control reg to fix host not acking at
++ * high frequencies
++ */
++ if (tmp) {
++ bcma_write32(dev, 0x524, 0x1); /* write sel to enable */
++ udelay(500);
++
++ bcma_write32(dev, 0x524, tmp);
++ udelay(500);
++ bcma_write32(dev, 0x524, 0x4ab);
++ udelay(500);
++ tmp = bcma_read32(dev, 0x528);
++ bcma_write32(dev, 0x528, 0x80000000);
++ }
++ }
++#endif /* CONFIG_BCMA_DRIVER_MIPS */
++}
++
++static struct platform_device *bcma_hcd_create_pdev(struct bcma_device *dev,
++ char *name, u32 addr)
++{
++ struct platform_device *hci_dev;
++ struct resource *hci_res;
++ int ret = -ENOMEM;
++
++ hci_res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
++ if (!hci_res)
++ return ERR_PTR(-ENOMEM);
++
++ hci_res[0].start = addr;
++ hci_res[0].end = hci_res[0].start + BCMA_CORE_SIZE - 1;
++ hci_res[0].flags = IORESOURCE_MEM;
++
++ hci_res[1].start = dev->irq;
++ hci_res[1].flags = IORESOURCE_IRQ;
++
++ hci_dev = platform_device_alloc(name, 0);
++ if (!hci_dev)
++ goto err_alloc;
++
++ hci_dev->dev.parent = &dev->dev;
++ hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
++
++ ret = platform_device_add_resources(hci_dev, hci_res, 2);
++ if (ret)
++ goto err_alloc;
++
++ ret = platform_device_add(hci_dev);
++ if (ret) {
++err_alloc:
++ kfree(hci_res);
++ platform_device_put(hci_dev);
++ return ERR_PTR(ret);
++ }
++
++ return hci_dev;
++}
++
++static int bcma_hcd_probe(struct bcma_device *dev)
++{
++ int err;
++ u16 chipid_top;
++ struct bcma_hcd_device *usb_dev;
++
++ /* USBcores are only connected on embedded devices. */
++ chipid_top = (dev->bus->chipinfo.id & 0xFF00);
++ if (chipid_top != 0x4700 && chipid_top != 0x5300)
++ return -ENODEV;
++
++ /* TODO: Probably need checks here; is the core connected? */
++
++ if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
++ dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
++ return -EOPNOTSUPP;
++
++ usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL);
++ if (!usb_dev)
++ return -ENOMEM;
++
++ bcma_hcd_init_chip(dev);
++
++ usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, "ohci-platform",
++ dev->addr1);
++ if (IS_ERR(usb_dev->ohci_dev)) {
++ err = PTR_ERR(usb_dev->ohci_dev);
++ goto err_free_usb_dev;
++ }
++
++ usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, "ehci-platform",
++ dev->addr);
++ if (IS_ERR(usb_dev->ehci_dev)) {
++ err = PTR_ERR(usb_dev->ehci_dev);
++ goto err_unregister_ohci_dev;
++
++ }
++
++ bcma_set_drvdata(dev, usb_dev);
++ return 0;
++
++err_unregister_ohci_dev:
++ platform_device_unregister(usb_dev->ohci_dev);
++err_free_usb_dev:
++ kfree(usb_dev);
++ return err;
++}
++
++static void bcma_hcd_remove(struct bcma_device *dev)
++{
++ struct bcma_hcd_device *usb_dev;
++ struct platform_device *ohci_dev;
++ struct platform_device *ehci_dev;
++
++ usb_dev = bcma_get_drvdata(dev);
++ if (!usb_dev)
++ return;
++
++ ohci_dev = usb_dev->ohci_dev;
++ ehci_dev = usb_dev->ehci_dev;
++
++ if (ohci_dev) {
++ platform_device_unregister(ohci_dev);
++ }
++ if (ehci_dev) {
++ platform_device_unregister(ehci_dev);
++ }
++
++ bcma_core_disable(dev, 0);
++}
++
++static void bcma_hcd_shutdown(struct bcma_device *dev)
++{
++ bcma_core_disable(dev, 0);
++}
++
++#ifdef CONFIG_PM
++
++static int bcma_hcd_suspend(struct bcma_device *dev, pm_message_t state)
++{
++ bcma_core_disable(dev, 0);
++
++ return 0;
++}
++
++static int bcma_hcd_resume(struct bcma_device *dev)
++{
++ bcma_core_enable(dev, 0);
++
++ return 0;
++}
++
++#else /* !CONFIG_PM */
++#define bcma_hcd_suspend NULL
++#define bcma_hcd_resume NULL
++#endif /* CONFIG_PM */
++
++static const struct bcma_device_id bcma_hcd_table[] = {
++ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
++ BCMA_CORETABLE_END
++};
++MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);
++
++static struct bcma_driver bcma_hcd_driver = {
++ .name = KBUILD_MODNAME,
++ .id_table = bcma_hcd_table,
++ .probe = bcma_hcd_probe,
++ .remove = bcma_hcd_remove,
++ .shutdown = bcma_hcd_shutdown,
++ .suspend = bcma_hcd_suspend,
++ .resume = bcma_hcd_resume,
++};
++
++static int __init bcma_hcd_init(void)
++{
++ return bcma_driver_register(&bcma_hcd_driver);
++}
++module_init(bcma_hcd_init);
++
++static void __exit bcma_hcd_exit(void)
++{
++ bcma_driver_unregister(&bcma_hcd_driver);
++}
++module_exit(bcma_hcd_exit);
diff --git a/target/linux/brcm47xx/patches-3.0/0033-USB-Add-driver-for-the-ssb-bus.patch b/target/linux/brcm47xx/patches-3.0/0033-USB-Add-driver-for-the-ssb-bus.patch
new file mode 100644
index 0000000..866540b
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0033-USB-Add-driver-for-the-ssb-bus.patch
@@ -0,0 +1,321 @@
+From b61e70ad9080a6dbd3731917ec21dbcbb9d382a2 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 26 Nov 2011 21:35:17 +0100
+Subject: [PATCH 20/21] USB: Add driver for the ssb bus
+
+This adds a USB driver using the generic platform device driver for the
+USB controller found on the Broadcom ssb bus. The ssb bus just
+exposes one device which serves the OHCI and the EHCI controller at the
+same time. This driver probes for this USB controller and creates and
+registers two new platform devices which will be probed by the new
+generic platform device driver. This makes it possible to use the EHCI
+and the OCHI controller on the ssb bus at the same time.
+
+The old ssb OHCI USB driver will be removed in the next step as this
+driver also provide an OHCI driver and an EHCI for the cores supporting
+it.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/Kconfig | 12 ++
+ drivers/usb/host/Makefile | 1 +
+ drivers/usb/host/ssb-hcd.c | 320 ++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 333 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/usb/host/ssb-hcd.c
+
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -610,3 +610,15 @@ config USB_HCD_BCMA
+ for ehci and ohci.
+
+ If unsure, say N.
++
++config USB_HCD_SSB
++ tristate "SSB usb host driver"
++ depends on SSB && EXPERIMENTAL
++ select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
++ select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
++ help
++ Enbale support for the EHCI and OCHI host controller on an bcma bus.
++ It converts the bcma driver into two platform device drivers
++ for ehci and ohci.
++
++ If unsure, say N.
+--- a/drivers/usb/host/Makefile
++++ b/drivers/usb/host/Makefile
+@@ -36,3 +36,4 @@ obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd
+ obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o
+ obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
+ obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o
++obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o
+--- /dev/null
++++ b/drivers/usb/host/ssb-hcd.c
+@@ -0,0 +1,268 @@
++/*
++ * Sonics Silicon Backplane
++ * Broadcom USB-core driver (SSB bus glue)
++ *
++ * Copyright 2011 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Based on ssb-ohci driver
++ * Copyright 2007 Michael Buesch <m@bues.ch>
++ *
++ * Derived from the OHCI-PCI driver
++ * Copyright 1999 Roman Weissgaerber
++ * Copyright 2000-2002 David Brownell
++ * Copyright 1999 Linus Torvalds
++ * Copyright 1999 Gregory P. Smith
++ *
++ * Derived from the USBcore related parts of Broadcom-SB
++ * Copyright 2005-2011 Broadcom Corporation
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++#include <linux/ssb/ssb.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/module.h>
++
++MODULE_AUTHOR("Hauke Mehrtens");
++MODULE_DESCRIPTION("Common USB driver for SSB Bus");
++MODULE_LICENSE("GPL");
++
++#define SSB_HCD_TMSLOW_HOSTMODE (1 << 29)
++
++struct ssb_hcd_device {
++ struct platform_device *ehci_dev;
++ struct platform_device *ohci_dev;
++
++ u32 enable_flags;
++};
++
++/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
++static u32 ssb_hcd_init_chip(struct ssb_device *dev)
++{
++ u32 tmp, flags = 0;
++
++ if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
++ /* Put the device into host-mode. */
++ flags |= SSB_HCD_TMSLOW_HOSTMODE;
++ ssb_device_enable(dev, flags);
++ } else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
++ /*
++ * USB 2.0 special considerations:
++ *
++ * In addition to the standard SSB reset sequence, the Host
++ * Control Register must be programmed to bring the USB core
++ * and various phy components out of reset.
++ */
++ ssb_device_enable(dev, 0);
++ ssb_write32(dev, 0x200, 0x7ff);
++
++ /* Change Flush control reg */
++ tmp = ssb_read32(dev, 0x400);
++ tmp &= ~8;
++ ssb_write32(dev, 0x400, tmp);
++ tmp = ssb_read32(dev, 0x400);
++
++ /* Change Shim control reg */
++ tmp = ssb_read32(dev, 0x304);
++ tmp &= ~0x100;
++ ssb_write32(dev, 0x304, tmp);
++ tmp = ssb_read32(dev, 0x304);
++
++ udelay(1);
++
++ /* Work around for 5354 failures */
++ if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
++ /* Change syn01 reg */
++ tmp = 0x00fe00fe;
++ ssb_write32(dev, 0x894, tmp);
++
++ /* Change syn03 reg */
++ tmp = ssb_read32(dev, 0x89c);
++ tmp |= 0x1;
++ ssb_write32(dev, 0x89c, tmp);
++ }
++ } else
++ ssb_device_enable(dev, 0);
++
++ return flags;
++}
++
++static struct platform_device *ssb_hcd_create_pdev(struct ssb_device *dev,
++ char *name, u32 addr,
++ u32 len)
++{
++ struct platform_device *hci_dev;
++ struct resource *hci_res;
++ int ret = -ENOMEM;
++
++ hci_res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
++ if (!hci_res)
++ return ERR_PTR(-ENOMEM);
++
++ hci_res[0].start = addr;
++ hci_res[0].end = hci_res[0].start + len - 1;
++ hci_res[0].flags = IORESOURCE_MEM;
++
++ hci_res[1].start = dev->irq;
++ hci_res[1].flags = IORESOURCE_IRQ;
++
++ hci_dev = platform_device_alloc(name, 0);
++ if (!hci_dev)
++ goto err_alloc;
++
++ hci_dev->dev.parent = dev->dev;
++ hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
++
++ ret = platform_device_add_resources(hci_dev, hci_res, 2);
++ if (ret)
++ goto err_alloc;
++
++ ret = platform_device_add(hci_dev);
++ if (ret) {
++err_alloc:
++ kfree(hci_res);
++ platform_device_put(hci_dev);
++ return ERR_PTR(ret);
++ }
++
++ return hci_dev;
++}
++
++static int ssb_hcd_probe(struct ssb_device *dev, const struct ssb_device_id *id)
++{
++ int err, tmp;
++ int start, len;
++ u16 chipid_top;
++ struct ssb_hcd_device *usb_dev;
++
++ /* USBcores are only connected on embedded devices. */
++ chipid_top = (dev->bus->chip_id & 0xFF00);
++ if (chipid_top != 0x4700 && chipid_top != 0x5300)
++ return -ENODEV;
++
++ /* TODO: Probably need checks here; is the core connected? */
++
++ if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
++ dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
++ return -EOPNOTSUPP;
++
++ usb_dev = kzalloc(sizeof(struct ssb_hcd_device), GFP_KERNEL);
++ if (!usb_dev)
++ return -ENOMEM;
++
++ /* We currently always attach SSB_DEV_USB11_HOSTDEV
++ * as HOST OHCI. If we want to attach it as Client device,
++ * we must branch here and call into the (yet to
++ * be written) Client mode driver. Same for remove(). */
++ usb_dev->enable_flags = ssb_hcd_init_chip(dev);
++
++ tmp = ssb_read32(dev, SSB_ADMATCH0);
++
++ start = ssb_admatch_base(tmp);
++ len = ssb_admatch_size(tmp);
++ usb_dev->ohci_dev = ssb_hcd_create_pdev(dev, "ohci-platform", start,
++ len);
++ if (IS_ERR(usb_dev->ohci_dev)) {
++ err = PTR_ERR(usb_dev->ohci_dev);
++ goto err_free_usb_dev;
++ }
++
++ if (dev->id.coreid == SSB_DEV_USB20_HOST) {
++ start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */
++ len = 0x100; /* ehci reg block size */
++ usb_dev->ehci_dev = ssb_hcd_create_pdev(dev, "ehci-platform",
++ start, len);
++ if (IS_ERR(usb_dev->ehci_dev)) {
++ err = PTR_ERR(usb_dev->ehci_dev);
++ goto err_unregister_ohci_dev;
++ }
++ }
++
++ ssb_set_drvdata(dev, usb_dev);
++ return 0;
++
++err_unregister_ohci_dev:
++ platform_device_unregister(usb_dev->ohci_dev);
++err_free_usb_dev:
++ kfree(usb_dev);
++ return err;
++}
++
++static void ssb_hcd_remove(struct ssb_device *dev)
++{
++ struct ssb_hcd_device *usb_dev;
++ struct platform_device *ohci_dev;
++ struct platform_device *ehci_dev;
++
++ usb_dev = ssb_get_drvdata(dev);
++ if (!usb_dev)
++ return;
++
++ ohci_dev = usb_dev->ohci_dev;
++ ehci_dev = usb_dev->ehci_dev;
++
++ if (ohci_dev) {
++ platform_device_unregister(ohci_dev);
++ }
++ if (ehci_dev) {
++ platform_device_unregister(ehci_dev);
++ }
++
++ ssb_device_disable(dev, 0);
++}
++
++static void ssb_hcd_shutdown(struct ssb_device *dev)
++{
++ ssb_device_disable(dev, 0);
++}
++
++#ifdef CONFIG_PM
++
++static int ssb_hcd_suspend(struct ssb_device *dev, pm_message_t state)
++{
++ ssb_device_disable(dev, 0);
++
++ return 0;
++}
++
++static int ssb_hcd_resume(struct ssb_device *dev)
++{
++ ssb_device_enable(dev, usb_dev->enable_flags);
++
++ return 0;
++}
++
++#else /* !CONFIG_PM */
++#define ssb_hcd_suspend NULL
++#define ssb_hcd_resume NULL
++#endif /* CONFIG_PM */
++
++static const struct ssb_device_id ssb_hcd_table[] = {
++ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
++ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
++ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
++ SSB_DEVTABLE_END
++};
++MODULE_DEVICE_TABLE(ssb, ssb_hcd_table);
++
++static struct ssb_driver ssb_hcd_driver = {
++ .name = KBUILD_MODNAME,
++ .id_table = ssb_hcd_table,
++ .probe = ssb_hcd_probe,
++ .remove = ssb_hcd_remove,
++ .shutdown = ssb_hcd_shutdown,
++ .suspend = ssb_hcd_suspend,
++ .resume = ssb_hcd_resume,
++};
++
++static int __init ssb_hcd_init(void)
++{
++ return ssb_driver_register(&ssb_hcd_driver);
++}
++module_init(ssb_hcd_init);
++
++static void __exit ssb_hcd_exit(void)
++{
++ ssb_driver_unregister(&ssb_hcd_driver);
++}
++module_exit(ssb_hcd_exit);
diff --git a/target/linux/brcm47xx/patches-3.0/0034-USB-OHCI-remove-old-SSB-OHCI-driver.patch b/target/linux/brcm47xx/patches-3.0/0034-USB-OHCI-remove-old-SSB-OHCI-driver.patch
new file mode 100644
index 0000000..18c3e9f
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0034-USB-OHCI-remove-old-SSB-OHCI-driver.patch
@@ -0,0 +1,357 @@
+From 8483de69568d1da9c106683d35d2b79c729b56c2 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 26 Nov 2011 21:36:50 +0100
+Subject: [PATCH 21/21] USB: OHCI: remove old SSB OHCI driver
+
+This is now replaced by the new ssb USB driver, which also supports
+devices with an EHCI controller.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/Kconfig | 13 --
+ drivers/usb/host/ohci-hcd.c | 19 ---
+ drivers/usb/host/ohci-ssb.c | 260 -------------------------------------------
+ 3 files changed, 0 insertions(+), 292 deletions(-)
+ delete mode 100644 drivers/usb/host/ohci-ssb.c
+
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -351,19 +351,6 @@ config USB_OHCI_HCD_PCI
+ Enables support for PCI-bus plug-in USB controller cards.
+ If unsure, say Y.
+
+-config USB_OHCI_HCD_SSB
+- bool "OHCI support for Broadcom SSB OHCI core"
+- depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL
+- default n
+- ---help---
+- Support for the Sonics Silicon Backplane (SSB) attached
+- Broadcom USB OHCI core.
+-
+- This device is present in some embedded devices with
+- Broadcom based SSB bus.
+-
+- If unsure, say N.
+-
+ config USB_OHCI_SH
+ bool "OHCI support for SuperH USB controller"
+ depends on USB_OHCI_HCD && SUPERH
+--- a/drivers/usb/host/ohci-hcd.c
++++ b/drivers/usb/host/ohci-hcd.c
+@@ -1079,11 +1079,6 @@ MODULE_LICENSE ("GPL");
+ #define PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver
+ #endif
+
+-#ifdef CONFIG_USB_OHCI_HCD_SSB
+-#include "ohci-ssb.c"
+-#define SSB_OHCI_DRIVER ssb_ohci_driver
+-#endif
+-
+ #ifdef CONFIG_MFD_SM501
+ #include "ohci-sm501.c"
+ #define SM501_OHCI_DRIVER ohci_hcd_sm501_driver
+@@ -1128,7 +1123,6 @@ MODULE_LICENSE ("GPL");
+ !defined(PS3_SYSTEM_BUS_DRIVER) && \
+ !defined(SM501_OHCI_DRIVER) && \
+ !defined(TMIO_OHCI_DRIVER) && \
+- !defined(SSB_OHCI_DRIVER) && \
+ !defined(PLATFORM_OHCI_DRIVER)
+ #error "missing bus glue for ohci-hcd"
+ #endif
+@@ -1195,12 +1189,6 @@ static int __init ohci_hcd_mod_init(void
+ goto error_pci;
+ #endif
+
+-#ifdef SSB_OHCI_DRIVER
+- retval = ssb_driver_register(&SSB_OHCI_DRIVER);
+- if (retval)
+- goto error_ssb;
+-#endif
+-
+ #ifdef SM501_OHCI_DRIVER
+ retval = platform_driver_register(&SM501_OHCI_DRIVER);
+ if (retval < 0)
+@@ -1234,10 +1222,6 @@ static int __init ohci_hcd_mod_init(void
+ platform_driver_unregister(&SM501_OHCI_DRIVER);
+ error_sm501:
+ #endif
+-#ifdef SSB_OHCI_DRIVER
+- ssb_driver_unregister(&SSB_OHCI_DRIVER);
+- error_ssb:
+-#endif
+ #ifdef PCI_DRIVER
+ pci_unregister_driver(&PCI_DRIVER);
+ error_pci:
+@@ -1288,9 +1272,6 @@ static void __exit ohci_hcd_mod_exit(voi
+ #ifdef SM501_OHCI_DRIVER
+ platform_driver_unregister(&SM501_OHCI_DRIVER);
+ #endif
+-#ifdef SSB_OHCI_DRIVER
+- ssb_driver_unregister(&SSB_OHCI_DRIVER);
+-#endif
+ #ifdef PCI_DRIVER
+ pci_unregister_driver(&PCI_DRIVER);
+ #endif
+--- a/drivers/usb/host/ohci-ssb.c
++++ /dev/null
+@@ -1,260 +0,0 @@
+-/*
+- * Sonics Silicon Backplane
+- * Broadcom USB-core OHCI driver
+- *
+- * Copyright 2007 Michael Buesch <mb@bu3sch.de>
+- *
+- * Derived from the OHCI-PCI driver
+- * Copyright 1999 Roman Weissgaerber
+- * Copyright 2000-2002 David Brownell
+- * Copyright 1999 Linus Torvalds
+- * Copyright 1999 Gregory P. Smith
+- *
+- * Derived from the USBcore related parts of Broadcom-SB
+- * Copyright 2005 Broadcom Corporation
+- *
+- * Licensed under the GNU/GPL. See COPYING for details.
+- */
+-#include <linux/ssb/ssb.h>
+-
+-
+-#define SSB_OHCI_TMSLOW_HOSTMODE (1 << 29)
+-
+-struct ssb_ohci_device {
+- struct ohci_hcd ohci; /* _must_ be at the beginning. */
+-
+- u32 enable_flags;
+-};
+-
+-static inline
+-struct ssb_ohci_device *hcd_to_ssb_ohci(struct usb_hcd *hcd)
+-{
+- return (struct ssb_ohci_device *)(hcd->hcd_priv);
+-}
+-
+-
+-static int ssb_ohci_reset(struct usb_hcd *hcd)
+-{
+- struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
+- struct ohci_hcd *ohci = &ohcidev->ohci;
+- int err;
+-
+- ohci_hcd_init(ohci);
+- err = ohci_init(ohci);
+-
+- return err;
+-}
+-
+-static int ssb_ohci_start(struct usb_hcd *hcd)
+-{
+- struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
+- struct ohci_hcd *ohci = &ohcidev->ohci;
+- int err;
+-
+- err = ohci_run(ohci);
+- if (err < 0) {
+- ohci_err(ohci, "can't start\n");
+- ohci_stop(hcd);
+- }
+-
+- return err;
+-}
+-
+-static const struct hc_driver ssb_ohci_hc_driver = {
+- .description = "ssb-usb-ohci",
+- .product_desc = "SSB OHCI Controller",
+- .hcd_priv_size = sizeof(struct ssb_ohci_device),
+-
+- .irq = ohci_irq,
+- .flags = HCD_MEMORY | HCD_USB11,
+-
+- .reset = ssb_ohci_reset,
+- .start = ssb_ohci_start,
+- .stop = ohci_stop,
+- .shutdown = ohci_shutdown,
+-
+- .urb_enqueue = ohci_urb_enqueue,
+- .urb_dequeue = ohci_urb_dequeue,
+- .endpoint_disable = ohci_endpoint_disable,
+-
+- .get_frame_number = ohci_get_frame,
+-
+- .hub_status_data = ohci_hub_status_data,
+- .hub_control = ohci_hub_control,
+-#ifdef CONFIG_PM
+- .bus_suspend = ohci_bus_suspend,
+- .bus_resume = ohci_bus_resume,
+-#endif
+-
+- .start_port_reset = ohci_start_port_reset,
+-};
+-
+-static void ssb_ohci_detach(struct ssb_device *dev)
+-{
+- struct usb_hcd *hcd = ssb_get_drvdata(dev);
+-
+- if (hcd->driver->shutdown)
+- hcd->driver->shutdown(hcd);
+- usb_remove_hcd(hcd);
+- iounmap(hcd->regs);
+- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+- usb_put_hcd(hcd);
+- ssb_device_disable(dev, 0);
+-}
+-
+-static int ssb_ohci_attach(struct ssb_device *dev)
+-{
+- struct ssb_ohci_device *ohcidev;
+- struct usb_hcd *hcd;
+- int err = -ENOMEM;
+- u32 tmp, flags = 0;
+-
+- if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
+- dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
+- return -EOPNOTSUPP;
+-
+- if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
+- /* Put the device into host-mode. */
+- flags |= SSB_OHCI_TMSLOW_HOSTMODE;
+- ssb_device_enable(dev, flags);
+- } else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
+- /*
+- * USB 2.0 special considerations:
+- *
+- * In addition to the standard SSB reset sequence, the Host
+- * Control Register must be programmed to bring the USB core
+- * and various phy components out of reset.
+- */
+- ssb_device_enable(dev, 0);
+- ssb_write32(dev, 0x200, 0x7ff);
+-
+- /* Change Flush control reg */
+- tmp = ssb_read32(dev, 0x400);
+- tmp &= ~8;
+- ssb_write32(dev, 0x400, tmp);
+- tmp = ssb_read32(dev, 0x400);
+-
+- /* Change Shim control reg */
+- tmp = ssb_read32(dev, 0x304);
+- tmp &= ~0x100;
+- ssb_write32(dev, 0x304, tmp);
+- tmp = ssb_read32(dev, 0x304);
+-
+- udelay(1);
+-
+- /* Work around for 5354 failures */
+- if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
+- /* Change syn01 reg */
+- tmp = 0x00fe00fe;
+- ssb_write32(dev, 0x894, tmp);
+-
+- /* Change syn03 reg */
+- tmp = ssb_read32(dev, 0x89c);
+- tmp |= 0x1;
+- ssb_write32(dev, 0x89c, tmp);
+- }
+- } else
+- ssb_device_enable(dev, 0);
+-
+- hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
+- dev_name(dev->dev));
+- if (!hcd)
+- goto err_dev_disable;
+- ohcidev = hcd_to_ssb_ohci(hcd);
+- ohcidev->enable_flags = flags;
+-
+- tmp = ssb_read32(dev, SSB_ADMATCH0);
+- hcd->rsrc_start = ssb_admatch_base(tmp);
+- hcd->rsrc_len = ssb_admatch_size(tmp);
+- hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+- if (!hcd->regs)
+- goto err_put_hcd;
+- err = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
+- if (err)
+- goto err_iounmap;
+-
+- ssb_set_drvdata(dev, hcd);
+-
+- return err;
+-
+-err_iounmap:
+- iounmap(hcd->regs);
+-err_put_hcd:
+- usb_put_hcd(hcd);
+-err_dev_disable:
+- ssb_device_disable(dev, flags);
+- return err;
+-}
+-
+-static int ssb_ohci_probe(struct ssb_device *dev,
+- const struct ssb_device_id *id)
+-{
+- int err;
+- u16 chipid_top;
+-
+- /* USBcores are only connected on embedded devices. */
+- chipid_top = (dev->bus->chip_id & 0xFF00);
+- if (chipid_top != 0x4700 && chipid_top != 0x5300)
+- return -ENODEV;
+-
+- /* TODO: Probably need checks here; is the core connected? */
+-
+- if (usb_disabled())
+- return -ENODEV;
+-
+- /* We currently always attach SSB_DEV_USB11_HOSTDEV
+- * as HOST OHCI. If we want to attach it as Client device,
+- * we must branch here and call into the (yet to
+- * be written) Client mode driver. Same for remove(). */
+-
+- err = ssb_ohci_attach(dev);
+-
+- return err;
+-}
+-
+-static void ssb_ohci_remove(struct ssb_device *dev)
+-{
+- ssb_ohci_detach(dev);
+-}
+-
+-#ifdef CONFIG_PM
+-
+-static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state)
+-{
+- ssb_device_disable(dev, 0);
+-
+- return 0;
+-}
+-
+-static int ssb_ohci_resume(struct ssb_device *dev)
+-{
+- struct usb_hcd *hcd = ssb_get_drvdata(dev);
+- struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
+-
+- ssb_device_enable(dev, ohcidev->enable_flags);
+-
+- ohci_finish_controller_resume(hcd);
+- return 0;
+-}
+-
+-#else /* !CONFIG_PM */
+-#define ssb_ohci_suspend NULL
+-#define ssb_ohci_resume NULL
+-#endif /* CONFIG_PM */
+-
+-static const struct ssb_device_id ssb_ohci_table[] = {
+- SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
+- SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
+- SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
+- SSB_DEVTABLE_END
+-};
+-MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
+-
+-static struct ssb_driver ssb_ohci_driver = {
+- .name = KBUILD_MODNAME,
+- .id_table = ssb_ohci_table,
+- .probe = ssb_ohci_probe,
+- .remove = ssb_ohci_remove,
+- .suspend = ssb_ohci_suspend,
+- .resume = ssb_ohci_resume,
+-};
diff --git a/target/linux/brcm47xx/patches-3.0/022-USB-Add-ehci-ssb-driver.patch b/target/linux/brcm47xx/patches-3.0/022-USB-Add-ehci-ssb-driver.patch
deleted file mode 100644
index 33e23c2..0000000
--- a/target/linux/brcm47xx/patches-3.0/022-USB-Add-ehci-ssb-driver.patch
+++ /dev/null
@@ -1,330 +0,0 @@
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -230,6 +230,19 @@ config USB_OXU210HP_HCD
- To compile this driver as a module, choose M here: the
- module will be called oxu210hp-hcd.
-
-+config USB_EHCI_HCD_SSB
-+ bool "EHCI support for Broadcom SSB EHCI core"
-+ depends on USB_EHCI_HCD && (SSB = y || SSB = USB_EHCI_HCD) && EXPERIMENTAL
-+ default n
-+ ---help---
-+ Support for the Sonics Silicon Backplane (SSB) attached
-+ Broadcom USB EHCI core.
-+
-+ This device is present in some embedded devices with
-+ Broadcom based SSB bus.
-+
-+ If unsure, say N.
-+
- config USB_ISP116X_HCD
- tristate "ISP116X HCD support"
- depends on USB
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1312,9 +1312,14 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER ehci_grlib_driver
- #endif
-
-+#ifdef CONFIG_USB_EHCI_HCD_SSB
-+#include "ehci-ssb.c"
-+#define SSB_EHCI_DRIVER ssb_ehci_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
- !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
-- !defined(XILINX_OF_PLATFORM_DRIVER)
-+ !defined(XILINX_OF_PLATFORM_DRIVER) && !defined(SSB_EHCI_DRIVER)
- #error "missing bus glue for ehci-hcd"
- #endif
-
-@@ -1374,10 +1379,20 @@ static int __init ehci_hcd_init(void)
- if (retval < 0)
- goto clean4;
- #endif
-+
-+#ifdef SSB_EHCI_DRIVER
-+ retval = ssb_driver_register(&SSB_EHCI_DRIVER);
-+ if (retval < 0)
-+ goto clean5;
-+#endif
- return retval;
-
-+#ifdef SSB_EHCI_DRIVER
-+ /* ssb_driver_unregister(&SSB_EHCI_DRIVER); */
-+clean5:
-+#endif
- #ifdef XILINX_OF_PLATFORM_DRIVER
-- /* platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER); */
-+ platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER);
- clean4:
- #endif
- #ifdef OF_PLATFORM_DRIVER
-@@ -1408,6 +1423,9 @@ module_init(ehci_hcd_init);
-
- static void __exit ehci_hcd_cleanup(void)
- {
-+#ifdef SSB_EHCI_DRIVER
-+ ssb_driver_unregister(&SSB_EHCI_DRIVER);
-+#endif
- #ifdef XILINX_OF_PLATFORM_DRIVER
- platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER);
- #endif
---- /dev/null
-+++ b/drivers/usb/host/ehci-ssb.c
-@@ -0,0 +1,255 @@
-+/*
-+ * Sonics Silicon Backplane
-+ * Broadcom USB-core EHCI driver (SSB bus glue)
-+ *
-+ * Copyright 2007 Steven Brown <sbrown@cortland.com>
-+ * Copyright 2010 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Derived from the OHCI-SSB driver
-+ * Copyright 2007 Michael Buesch <mb@bu3sch.de>
-+ *
-+ * Derived from the EHCI-PCI driver
-+ * Copyright (c) 2000-2004 by David Brownell
-+ *
-+ * Derived from the OHCI-PCI driver
-+ * Copyright 1999 Roman Weissgaerber
-+ * Copyright 2000-2002 David Brownell
-+ * Copyright 1999 Linus Torvalds
-+ * Copyright 1999 Gregory P. Smith
-+ *
-+ * Derived from the USBcore related parts of Broadcom-SB
-+ * Copyright 2005 Broadcom Corporation
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+#include <linux/ssb/ssb.h>
-+
-+
-+struct ssb_ehci_device {
-+ struct ehci_hcd ehci; /* _must_ be at the beginning. */
-+};
-+
-+static inline
-+struct ssb_ehci_device *hcd_to_ssb_ehci(struct usb_hcd *hcd)
-+{
-+ return (struct ssb_ehci_device *)(hcd->hcd_priv);
-+}
-+
-+static int ssb_ehci_reset(struct usb_hcd *hcd)
-+{
-+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+ int err;
-+
-+ ehci->caps = hcd->regs;
-+ ehci->regs = hcd->regs +
-+ HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
-+
-+ dbg_hcs_params(ehci, "reset");
-+ dbg_hcc_params(ehci, "reset");
-+
-+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-+
-+ err = ehci_halt(ehci);
-+
-+ if (err)
-+ return err;
-+
-+ err = ehci_init(hcd);
-+
-+ if (err)
-+ return err;
-+
-+ ehci_reset(ehci);
-+
-+ return err;
-+}
-+
-+static const struct hc_driver ssb_ehci_hc_driver = {
-+ .description = "ssb-usb-ehci",
-+ .product_desc = "SSB EHCI Controller",
-+ .hcd_priv_size = sizeof(struct ssb_ehci_device),
-+
-+ .irq = ehci_irq,
-+ .flags = HCD_MEMORY | HCD_USB2,
-+
-+ .reset = ssb_ehci_reset,
-+ .start = ehci_run,
-+ .stop = ehci_stop,
-+ .shutdown = ehci_shutdown,
-+
-+ .urb_enqueue = ehci_urb_enqueue,
-+ .urb_dequeue = ehci_urb_dequeue,
-+ .endpoint_disable = ehci_endpoint_disable,
-+ .endpoint_reset = ehci_endpoint_reset,
-+
-+ .get_frame_number = ehci_get_frame,
-+
-+ .hub_status_data = ehci_hub_status_data,
-+ .hub_control = ehci_hub_control,
-+#if defined(CONFIG_PM)
-+ .bus_suspend = ehci_bus_suspend,
-+ .bus_resume = ehci_bus_resume,
-+#endif
-+ .relinquish_port = ehci_relinquish_port,
-+ .port_handed_over = ehci_port_handed_over,
-+
-+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-+};
-+
-+static void ssb_ehci_detach(struct ssb_device *dev)
-+{
-+ struct usb_hcd *hcd = ssb_get_drvdata(dev);
-+
-+ if (hcd->driver->shutdown)
-+ hcd->driver->shutdown(hcd);
-+ usb_remove_hcd(hcd);
-+ iounmap(hcd->regs);
-+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+ usb_put_hcd(hcd);
-+ ssb_device_disable(dev, 0);
-+}
-+
-+static int ssb_ehci_attach(struct ssb_device *dev)
-+{
-+ struct ssb_ehci_device *ehcidev;
-+ struct usb_hcd *hcd;
-+ int err = -ENOMEM;
-+ u32 tmp;
-+
-+ if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
-+ dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
-+ return -EOPNOTSUPP;
-+
-+ /*
-+ * USB 2.0 special considerations:
-+ *
-+ * In addition to the standard SSB reset sequence, the Host Control
-+ * Register must be programmed to bring the USB core and various phy
-+ * components out of reset.
-+ */
-+ ssb_device_enable(dev, 0);
-+ ssb_write32(dev, 0x200, 0x7ff);
-+
-+ /* Change Flush control reg */
-+ tmp = ssb_read32(dev, 0x400);
-+ tmp &= ~8;
-+ ssb_write32(dev, 0x400, tmp);
-+ tmp = ssb_read32(dev, 0x400);
-+
-+ /* Change Shim control reg */
-+ tmp = ssb_read32(dev, 0x304);
-+ tmp &= ~0x100;
-+ ssb_write32(dev, 0x304, tmp);
-+ tmp = ssb_read32(dev, 0x304);
-+
-+ udelay(1);
-+
-+ /* Work around for 5354 failures */
-+ if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
-+ /* Change syn01 reg */
-+ tmp = 0x00fe00fe;
-+ ssb_write32(dev, 0x894, tmp);
-+
-+ /* Change syn03 reg */
-+ tmp = ssb_read32(dev, 0x89c);
-+ tmp |= 0x1;
-+ ssb_write32(dev, 0x89c, tmp);
-+ }
-+
-+ hcd = usb_create_hcd(&ssb_ehci_hc_driver, dev->dev,
-+ dev_name(dev->dev));
-+ if (!hcd)
-+ goto err_dev_disable;
-+
-+ ehcidev = hcd_to_ssb_ehci(hcd);
-+ tmp = ssb_read32(dev, SSB_ADMATCH0);
-+ hcd->rsrc_start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */
-+ hcd->rsrc_len = 0x100; /* ehci reg block size */
-+ /*
-+ * start & size modified per sbutils.c
-+ */
-+ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
-+ if (!hcd->regs)
-+ goto err_put_hcd;
-+ err = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
-+ if (err)
-+ goto err_iounmap;
-+
-+ ssb_set_drvdata(dev, hcd);
-+
-+ return err;
-+
-+err_iounmap:
-+ iounmap(hcd->regs);
-+err_put_hcd:
-+ usb_put_hcd(hcd);
-+err_dev_disable:
-+ ssb_device_disable(dev, 0);
-+ return err;
-+}
-+
-+static int ssb_ehci_probe(struct ssb_device *dev,
-+ const struct ssb_device_id *id)
-+{
-+ int err;
-+ u16 chipid_top;
-+
-+ /* USBcores are only connected on embedded devices. */
-+ chipid_top = (dev->bus->chip_id & 0xFF00);
-+ if (chipid_top != 0x4700 && chipid_top != 0x5300)
-+ return -ENODEV;
-+
-+ /* TODO: Probably need checks here; is the core connected? */
-+
-+ if (usb_disabled())
-+ return -ENODEV;
-+
-+ err = ssb_ehci_attach(dev);
-+
-+ return err;
-+}
-+
-+static void ssb_ehci_remove(struct ssb_device *dev)
-+{
-+ ssb_ehci_detach(dev);
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int ssb_ehci_suspend(struct ssb_device *dev, pm_message_t state)
-+{
-+ ssb_device_disable(dev, 0);
-+
-+ return 0;
-+}
-+
-+static int ssb_ehci_resume(struct ssb_device *dev)
-+{
-+ struct usb_hcd *hcd = ssb_get_drvdata(dev);
-+ struct ssb_ehci_device *ehcidev = hcd_to_ssb_ehci(hcd);
-+
-+ ssb_device_enable(dev, 0);
-+
-+ ehci_finish_controller_resume(hcd);
-+ return 0;
-+}
-+
-+#else /* !CONFIG_PM */
-+#define ssb_ehci_suspend NULL
-+#define ssb_ehci_resume NULL
-+#endif /* CONFIG_PM */
-+
-+static const struct ssb_device_id ssb_ehci_table[] = {
-+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
-+ SSB_DEVTABLE_END
-+};
-+MODULE_DEVICE_TABLE(ssb, ssb_ehci_table);
-+
-+static struct ssb_driver ssb_ehci_driver = {
-+ .name = KBUILD_MODNAME,
-+ .id_table = ssb_ehci_table,
-+ .probe = ssb_ehci_probe,
-+ .remove = ssb_ehci_remove,
-+ .suspend = ssb_ehci_suspend,
-+ .resume = ssb_ehci_resume,
-+};
diff --git a/target/linux/brcm47xx/patches-3.0/023-usb_ehci_ohci.patch b/target/linux/brcm47xx/patches-3.0/023-usb_ehci_ohci.patch
deleted file mode 100644
index 5140a72..0000000
--- a/target/linux/brcm47xx/patches-3.0/023-usb_ehci_ohci.patch
+++ /dev/null
@@ -1,188 +0,0 @@
---- a/drivers/usb/host/ohci-ssb.c
-+++ b/drivers/usb/host/ohci-ssb.c
-@@ -17,6 +17,8 @@
- */
- #include <linux/ssb/ssb.h>
-
-+extern int ssb_ehci_attach(struct ssb_device *dev, struct usb_hcd **hcd);
-+extern void ssb_ehci_detach(struct ssb_device *dev, struct usb_hcd *hcd);
-
- #define SSB_OHCI_TMSLOW_HOSTMODE (1 << 29)
-
-@@ -24,6 +26,9 @@ struct ssb_ohci_device {
- struct ohci_hcd ohci; /* _must_ be at the beginning. */
-
- u32 enable_flags;
-+#ifdef CONFIG_USB_EHCI_HCD_SSB
-+ struct usb_hcd *ehci_hcd;
-+#endif
- };
-
- static inline
-@@ -92,6 +97,9 @@ static const struct hc_driver ssb_ohci_h
- static void ssb_ohci_detach(struct ssb_device *dev)
- {
- struct usb_hcd *hcd = ssb_get_drvdata(dev);
-+#ifdef CONFIG_USB_EHCI_HCD_SSB
-+ struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
-+#endif
-
- if (hcd->driver->shutdown)
- hcd->driver->shutdown(hcd);
-@@ -99,6 +107,14 @@ static void ssb_ohci_detach(struct ssb_d
- iounmap(hcd->regs);
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- usb_put_hcd(hcd);
-+
-+#ifdef CONFIG_USB_EHCI_HCD_SSB
-+ /*
-+ * Also detach ehci function
-+ */
-+ if (dev->id.coreid == SSB_DEV_USB20_HOST)
-+ ssb_ehci_detach(dev, ohcidev->ehci_hcd);
-+#endif
- ssb_device_disable(dev, 0);
- }
-
-@@ -121,6 +137,9 @@ static int ssb_ohci_attach(struct ssb_de
- /*
- * USB 2.0 special considerations:
- *
-+ * Since the core supports both OHCI and EHCI functions,
-+ * it must only be reset once.
-+ *
- * In addition to the standard SSB reset sequence, the Host
- * Control Register must be programmed to bring the USB core
- * and various phy components out of reset.
-@@ -175,6 +194,14 @@ static int ssb_ohci_attach(struct ssb_de
-
- ssb_set_drvdata(dev, hcd);
-
-+#ifdef CONFIG_USB_EHCI_HCD_SSB
-+ /*
-+ * attach ehci function in this core
-+ */
-+ if (dev->id.coreid == SSB_DEV_USB20_HOST)
-+ err = ssb_ehci_attach(dev, &(ohcidev->ehci_hcd));
-+#endif
-+
- return err;
-
- err_iounmap:
---- a/drivers/usb/host/ehci-ssb.c
-+++ b/drivers/usb/host/ehci-ssb.c
-@@ -106,10 +106,18 @@ static void ssb_ehci_detach(struct ssb_d
- iounmap(hcd->regs);
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- usb_put_hcd(hcd);
-+#ifndef CONFIG_USB_OHCI_HCD_SSB
-+ ssb_device_disable(dev, 0);
-+#endif
- ssb_device_disable(dev, 0);
- }
-+EXPORT_SYMBOL_GPL(ssb_ehci_detach);
-
-+#ifndef CONFIG_USB_OHCI_HCD_SSB
- static int ssb_ehci_attach(struct ssb_device *dev)
-+#else
-+static int ssb_ehci_attach(struct ssb_device *dev, struct usb_hcd **ehci_hcd)
-+#endif
- {
- struct ssb_ehci_device *ehcidev;
- struct usb_hcd *hcd;
-@@ -120,6 +128,7 @@ static int ssb_ehci_attach(struct ssb_de
- dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
- return -EOPNOTSUPP;
-
-+#ifndef CONFIG_USB_OHCI_HCD_SSB
- /*
- * USB 2.0 special considerations:
- *
-@@ -155,6 +164,7 @@ static int ssb_ehci_attach(struct ssb_de
- tmp |= 0x1;
- ssb_write32(dev, 0x89c, tmp);
- }
-+#endif
-
- hcd = usb_create_hcd(&ssb_ehci_hc_driver, dev->dev,
- dev_name(dev->dev));
-@@ -175,7 +185,11 @@ static int ssb_ehci_attach(struct ssb_de
- if (err)
- goto err_iounmap;
-
-+#ifndef CONFIG_USB_OHCI_HCD_SSB
- ssb_set_drvdata(dev, hcd);
-+#else
-+ *ehci_hcd = hcd;
-+#endif
-
- return err;
-
-@@ -187,7 +201,9 @@ err_dev_disable:
- ssb_device_disable(dev, 0);
- return err;
- }
-+EXPORT_SYMBOL_GPL(ssb_ehci_attach);
-
-+#ifndef CONFIG_USB_OHCI_HCD_SSB
- static int ssb_ehci_probe(struct ssb_device *dev,
- const struct ssb_device_id *id)
- {
-@@ -238,6 +254,7 @@ static int ssb_ehci_resume(struct ssb_de
- #define ssb_ehci_suspend NULL
- #define ssb_ehci_resume NULL
- #endif /* CONFIG_PM */
-+#endif /* !CONFIG_USB_OHCI_HCD_SSB */
-
- static const struct ssb_device_id ssb_ehci_table[] = {
- SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
-@@ -245,6 +262,8 @@ static const struct ssb_device_id ssb_eh
- };
- MODULE_DEVICE_TABLE(ssb, ssb_ehci_table);
-
-+
-+#ifndef CONFIG_USB_OHCI_HCD_SSB
- static struct ssb_driver ssb_ehci_driver = {
- .name = KBUILD_MODNAME,
- .id_table = ssb_ehci_table,
-@@ -253,3 +272,4 @@ static struct ssb_driver ssb_ehci_driver
- .suspend = ssb_ehci_suspend,
- .resume = ssb_ehci_resume,
- };
-+#endif
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1380,17 +1380,21 @@ static int __init ehci_hcd_init(void)
- goto clean4;
- #endif
-
-+#ifndef CONFIG_USB_OHCI_HCD_SSB
- #ifdef SSB_EHCI_DRIVER
- retval = ssb_driver_register(&SSB_EHCI_DRIVER);
- if (retval < 0)
- goto clean5;
- #endif
-+#endif /* !CONFIG_USB_OHCI_HCD_SSB */
- return retval;
-
-+#ifndef CONFIG_USB_OHCI_HCD_SSB
- #ifdef SSB_EHCI_DRIVER
- /* ssb_driver_unregister(&SSB_EHCI_DRIVER); */
- clean5:
- #endif
-+#endif /* !CONFIG_USB_OHCI_HCD_SSB */
- #ifdef XILINX_OF_PLATFORM_DRIVER
- platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER);
- clean4:
-@@ -1423,9 +1427,11 @@ module_init(ehci_hcd_init);
-
- static void __exit ehci_hcd_cleanup(void)
- {
-+#ifndef CONFIG_USB_OHCI_HCD_SSB
- #ifdef SSB_EHCI_DRIVER
- ssb_driver_unregister(&SSB_EHCI_DRIVER);
- #endif
-+#endif /* !CONFIG_USB_OHCI_HCD_SSB */
- #ifdef XILINX_OF_PLATFORM_DRIVER
- platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER);
- #endif
diff --git a/target/linux/brcm47xx/patches-3.0/280-activate_ssb_support_in_usb.patch b/target/linux/brcm47xx/patches-3.0/280-activate_ssb_support_in_usb.patch
index d3a8817..c535c05 100644
--- a/target/linux/brcm47xx/patches-3.0/280-activate_ssb_support_in_usb.patch
+++ b/target/linux/brcm47xx/patches-3.0/280-activate_ssb_support_in_usb.patch
@@ -3,14 +3,23 @@ This prevents the options from being delete with make kernel_oldconfig.
drivers/ssb/Kconfig | 2 ++
1 file changed, 2 insertions(+)
+--- a/drivers/bcma/Kconfig
++++ b/drivers/bcma/Kconfig
+@@ -37,6 +37,7 @@ config BCMA_DRIVER_PCI_HOSTMODE
+ config BCMA_HOST_SOC
+ bool
+ depends on BCMA_DRIVER_MIPS
++ select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD
+
+ config BCMA_SFLASH
+ bool
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
-@@ -147,6 +147,8 @@ config SSB_SFLASH
+@@ -147,6 +147,7 @@ config SSB_SFLASH
config SSB_EMBEDDED
bool
depends on SSB_DRIVER_MIPS
-+ select USB_EHCI_HCD_SSB if USB_EHCI_HCD
-+ select USB_OHCI_HCD_SSB if USB_OHCI_HCD
++ select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD
default y
config SSB_DRIVER_EXTIF