summaryrefslogtreecommitdiff
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh9
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/dts/K2P.dts119
-rw-r--r--target/linux/ramips/image/mt7621.mk7
6 files changed, 136 insertions, 4 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 78ba103..d0f3fce 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -83,6 +83,7 @@ ramips_setup_interfaces()
hc5661a|\
hc5962|\
hlk-rm04|\
+ k2p|\
kn|\
kn_rc|\
mac1200rv2|\
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 531c8e0..1349c00 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -157,6 +157,11 @@ get_status_led() {
hc5962)
status_led="$board:white:status"
;;
+ k2p|\
+ m3|\
+ miwifi-nano)
+ status_led="$board:blue:status"
+ ;;
linkits7688| \
linkits7688d)
[ "$1" = "upgrade" ] && status_led="mediatek:orange:wifi"
@@ -164,10 +169,6 @@ get_status_led() {
m2m)
status_led="$board:blue:wifi"
;;
- m3|\
- miwifi-nano)
- status_led="$board:blue:status"
- ;;
gl-mt300n-v2)
status_led="$board:red:wlan"
;;
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 056fab9..e2d7b07 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -262,6 +262,9 @@ ramips_board_detect() {
*"JHR-N926R")
name="jhr-n926r"
;;
+ *"K2P")
+ name="k2p"
+ ;;
*"M3")
name="m3"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index e0a2602..36469ca 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -74,6 +74,7 @@ platform_check_image() {
jhr-n805r|\
jhr-n825r|\
jhr-n926r|\
+ k2p|\
kn|\
kn_rc|\
kn_rf|\
diff --git a/target/linux/ramips/dts/K2P.dts b/target/linux/ramips/dts/K2P.dts
new file mode 100644
index 0000000..4089ce6
--- /dev/null
+++ b/target/linux/ramips/dts/K2P.dts
@@ -0,0 +1,119 @@
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "phicomm,k2p", "mediatek,mt7621-soc";
+ model = "Phicomm K2P";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ stat_r {
+ label = "k2p:red:status";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ stat_y {
+ label = "k2p:yellow:status";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ stat_b {
+ label = "k2p:blue:status";
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ m25p,chunked-io = <32>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "permanent_config";
+ reg = <0x50000 0x50000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "firmware";
+ reg = <0xa0000 0xf60000>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x0>;
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0xe000>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag";
+ ralink,function = "gpio";
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 940b9d5..103534e 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -88,6 +88,13 @@ define Device/hc5962
endef
TARGET_DEVICES += hc5962
+define Device/k2p
+ DTS := K2P
+ IMAGE_SIZE := $(ralink_default_fw_size_16M)
+ DEVICE_TITLE := Phicomm K2P
+endef
+TARGET_DEVICES += k2p
+
define Device/mt7621
DTS := MT7621
BLOCKSIZE := 64k