summaryrefslogtreecommitdiff
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/ps3/patches-2.6.28/0016-ps3-gelic-fix-rxdmac.patch89
1 files changed, 89 insertions, 0 deletions
diff --git a/target/linux/ps3/patches-2.6.28/0016-ps3-gelic-fix-rxdmac.patch b/target/linux/ps3/patches-2.6.28/0016-ps3-gelic-fix-rxdmac.patch
new file mode 100644
index 0000000..00204e3
--- /dev/null
+++ b/target/linux/ps3/patches-2.6.28/0016-ps3-gelic-fix-rxdmac.patch
@@ -0,0 +1,89 @@
+Subject: net/ps3_gelic: Fix RX DMA restart
+
+Fix the condition where PS3 network RX hangs when no network
+TX is occuring by calling gelic_card_enable_rxdmac() during
+RX_DMA_CHAIN_END event processing.
+
+The gelic hardware automatically clears its RX_DMA_EN flag when
+it detects an RX_DMA_CHAIN_END event. In its processing of
+RX_DMA_CHAIN_END the gelic driver is required to set RX_DMA_EN
+(with a call to gelic_card_enable_rxdmac()) to restart RX DMA
+transfers. The existing gelic driver code does not set
+RX_DMA_EN directly in its processing of the RX_DMA_CHAIN_END
+event, but uses a flag variable card->rx_dma_restart_required
+to schedule the setting of RX_DMA_EN until next inside the
+interrupt handler.
+
+It seems this delayed setting of RX_DMA_EN causes the hang since
+the next RX interrupt after the RX_DMA_CHAIN_END event where
+RX_DMA_EN is scheduled to be set will not occur since RX_DMA_EN
+was not set. In the case were network TX is occuring, RX_DMA_EN
+is set in the next TX interrupt and RX processing continues.
+
+Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
+---
+ drivers/net/ps3_gelic_net.c | 21 ++++++++-------------
+ drivers/net/ps3_gelic_net.h | 1 -
+ 2 files changed, 8 insertions(+), 14 deletions(-)
+
+--- a/drivers/net/ps3_gelic_net.c
++++ b/drivers/net/ps3_gelic_net.c
+@@ -970,10 +970,6 @@ static int gelic_card_decode_one_descr(s
+ int dmac_chain_ended;
+
+ status = gelic_descr_get_status(descr);
+- /* is this descriptor terminated with next_descr == NULL? */
+- dmac_chain_ended =
+- be32_to_cpu(descr->dmac_cmd_status) &
+- GELIC_DESCR_RX_DMA_CHAIN_END;
+
+ if (status == GELIC_DESCR_DMA_CARDOWNED)
+ return 0;
+@@ -1036,6 +1032,11 @@ static int gelic_card_decode_one_descr(s
+ /* ok, we've got a packet in descr */
+ gelic_net_pass_skb_up(descr, card, netdev);
+ refill:
++
++ /* is the current descriptor terminated with next_descr == NULL? */
++ dmac_chain_ended =
++ be32_to_cpu(descr->dmac_cmd_status) &
++ GELIC_DESCR_RX_DMA_CHAIN_END;
+ /*
+ * So that always DMAC can see the end
+ * of the descriptor chain to avoid
+@@ -1064,10 +1065,9 @@ refill:
+ * If dmac chain was met, DMAC stopped.
+ * thus re-enable it
+ */
+- if (dmac_chain_ended) {
+- card->rx_dma_restart_required = 1;
+- dev_dbg(ctodev(card), "reenable rx dma scheduled\n");
+- }
++
++ if (dmac_chain_ended)
++ gelic_card_enable_rxdmac(card);
+
+ return 1;
+ }
+@@ -1133,11 +1133,6 @@ static irqreturn_t gelic_card_interrupt(
+
+ status &= card->irq_mask;
+
+- if (card->rx_dma_restart_required) {
+- card->rx_dma_restart_required = 0;
+- gelic_card_enable_rxdmac(card);
+- }
+-
+ if (status & GELIC_CARD_RXINT) {
+ gelic_card_rx_irq_off(card);
+ napi_schedule(&card->napi);
+--- a/drivers/net/ps3_gelic_net.h
++++ b/drivers/net/ps3_gelic_net.h
+@@ -284,7 +284,6 @@ struct gelic_card {
+
+ struct gelic_descr_chain tx_chain;
+ struct gelic_descr_chain rx_chain;
+- int rx_dma_restart_required;
+ int rx_csum;
+ /*
+ * tx_lock guards tx descriptor list and