diff options
Diffstat (limited to 'target')
10 files changed, 132 insertions, 1 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 1a5747f..ba4787b 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -42,6 +42,9 @@ get_status_led() { mofi3500-3gn) status_led="mofi3500-3gn:green:status" ;; + nbg-419n) + status_led="nbg-419n:green:power" + ;; nw718) status_led="nw718:amber:cpu" ;; diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 0f50c9b..73dc255 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -50,6 +50,7 @@ case "$FIRMWARE" in hw550-3g | \ mofi3500-3gn | \ pwh2004 | \ + nbg-419n | \ nw718 | \ rt-n15 | \ v22rw-2x2 | \ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 65ebf84..227ca82 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -34,6 +34,9 @@ ramips_board_name() { *"MoFi Network MOFI3500-3GN") name="mofi3500-3gn" ;; + *"NBG-419N") + name="nbg-419n" + ;; *"NW718") name="nw718" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index dda4a67..58ba0f0 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -14,7 +14,7 @@ platform_check_image() { [ "$ARGC" -gt 1 ] && return 1 case "$board" in - dir-300-b1 | dir-600-b1 | dir-600-b2 | fonera20n | nw718 | rt-g32-b1 | v22rw-2x2 | whr-g300n | hw550-3g | mofi3500-3gn) + dir-300-b1 | dir-600-b1 | dir-600-b2 | fonera20n | nbg-419n | nw718 | rt-g32-b1 | v22rw-2x2 | whr-g300n | hw550-3g | mofi3500-3gn) [ "$magic" != "2705" ] && { echo "Invalid image type." return 1 diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h index 01e7922..2145bec 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h @@ -30,6 +30,7 @@ enum ramips_mach_type { RAMIPS_MACH_FONERA20N, /* La Fonera 2.0N */ RAMIPS_MACH_HW550_3G, /* Aztech HW550-3G */ RAMIPS_MACH_MOFI3500_3GN, /* MoFi Network MOFI3500-3GN */ + RAMIPS_MACH_NBG_419N, /* ZyXEL NBG-419N */ RAMIPS_MACH_PWH2004, /* Prolink 2004H / Abocom 5205 */ RAMIPS_MACH_V22RW_2X2, /* Ralink AP-RT3052-V22RW-2X2 */ RAMIPS_MACH_WCR150GN, /* Sparklan WCR-150GN */ diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig index 86ccfa7..392fb4f 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig @@ -66,6 +66,11 @@ config RT305X_MACH_WCR150GN select RALINK_DEV_GPIO_BUTTONS select RALINK_DEV_GPIO_LEDS +config RT305X_MACH_NBG_419N + bool "ZyXEL NBG-419N support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + endmenu endif diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile index 85fce92..2853429 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_RT305X_MACH_F5D8235_V2) += mach-f5d8235-v2.o obj-$(CONFIG_RT305X_MACH_FONERA20N) += mach-fonera20n.o obj-$(CONFIG_RT305X_MACH_HW550_3G) += mach-hw550-3g.o obj-$(CONFIG_RT305X_MACH_MOFI3500_3GN) += mach-mofi3500-3gn.o +obj-$(CONFIG_RT305X_MACH_NBG_419N) += mach-nbg-419n.o obj-$(CONFIG_RT305X_MACH_NW718) += mach-nw718.o obj-$(CONFIG_RT305X_MACH_PWH2004) += mach-pwh2004.o obj-$(CONFIG_RT305X_MACH_RT_G32_REVB) += mach-rt-g32-revb.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-nbg-419n.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-nbg-419n.c new file mode 100644 index 0000000..4227654 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-nbg-419n.c @@ -0,0 +1,111 @@ +/* + * ZyXEL NBG-419N board support + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define NBG_419N_GPIO_LED_POWER 9 +#define NBG_419N_GPIO_LED_WPS 14 + +#define NBG_419N_GPIO_BUTTON_WPS 0 /* active low */ +#define NBG_419N_GPIO_BUTTON_RESET 10 /* active low */ + +#define NBG_419N_BUTTONS_POLL_INTERVAL 20 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition nbg_419n_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "config", + .offset = 0x030000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "factory", + .offset = 0x040000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x050000, + .size = 0x3b0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct physmap_flash_data nbg_419n_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .nr_parts = ARRAY_SIZE(nbg_419n_partitions), + .parts = nbg_419n_partitions, +#endif +}; + +static struct gpio_led nbg_419n_leds_gpio[] __initdata = { + { + .name = "nbg-419n:green:power", + .gpio = NBG_419N_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "nbg-419n:green:wps", + .gpio = NBG_419N_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_button nbg_419n_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .threshold = 3, + .gpio = NBG_419N_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .threshold = 3, + .gpio = NBG_419N_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init nbg_419n_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0, &nbg_419n_flash_data); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(nbg_419n_leds_gpio), + nbg_419n_leds_gpio); + ramips_register_gpio_buttons(-1, NBG_419N_BUTTONS_POLL_INTERVAL, + ARRAY_SIZE(nbg_419n_gpio_buttons), + nbg_419n_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_NBG_419N, "NBG-419N", "ZyXEL NBG-419N", nbg_419n_init); diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 6cdb55c..9136f3a 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -154,6 +154,10 @@ define Image/Build/Profile/FONERA20N $(call Image/Build/Template/GENERIC_8M,$(1),fonera20n,FONERA20N) endef +define Image/Build/Profile/NBG419N + $(call Image/Build/Template/GENERIC_4M,$(1),nbg-419n,NBG-419N) +endef + define Image/Build/Profile/NW718 $(call Image/Build/Template/NW718,$(1),nw718,NW718) endef @@ -237,6 +241,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/RTG32B1,$(1)) $(call Image/Build/Profile/FONERA20N,$(1)) $(call Image/Build/Profile/V22RW2X2,$(1)) + $(call Image/Build/Profile/NBG419N,$(1)) $(call Image/Build/Profile/NW718,$(1)) $(call Image/Build/Profile/PWH2004,$(1)) $(call Image/Build/Profile/WHRG300N,$(1)) diff --git a/target/linux/ramips/rt305x/config-2.6.39 b/target/linux/ramips/rt305x/config-2.6.39 index 3276d14..643c938 100644 --- a/target/linux/ramips/rt305x/config-2.6.39 +++ b/target/linux/ramips/rt305x/config-2.6.39 @@ -98,6 +98,7 @@ CONFIG_RT305X_MACH_FONERA20N=y CONFIG_RT305X_MACH_HW550_3G=y CONFIG_RT305X_MACH_MOFI3500_3GN=y CONFIG_RT305X_MACH_NW718=y +CONFIG_RT305X_MACH_NBG_419N=y CONFIG_RT305X_MACH_PWH2004=y CONFIG_RT305X_MACH_RT_G32_REVB=y CONFIG_RT305X_MACH_V22RW_2X2=y |