diff options
Diffstat (limited to 'target')
119 files changed, 0 insertions, 21040 deletions
diff --git a/target/linux/ath79/Makefile b/target/linux/ath79/Makefile deleted file mode 100644 index e331cb4..0000000 --- a/target/linux/ath79/Makefile +++ /dev/null @@ -1,19 +0,0 @@ -include $(TOPDIR)/rules.mk - -ARCH:=mips -BOARD:=ath79 -BOARDNAME:=Atheros ATH79 (DTS) -CPU_TYPE:=24kc -SUBTARGETS:=generic - -FEATURES:=ramdisk source-only - -KERNEL_PATCHVER:=4.14 - -include $(INCLUDE_DIR)/target.mk - -DEFAULT_PACKAGES += \ - kmod-gpio-button-hotplug swconfig \ - kmod-ath9k wpad-mini uboot-envtools - -$(eval $(call BuildTarget)) diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds deleted file mode 100644 index 9d42861..0000000 --- a/target/linux/ath79/base-files/etc/board.d/01_leds +++ /dev/null @@ -1,21 +0,0 @@ -#!/bin/sh - -. /lib/functions/uci-defaults.sh - -board_config_update - -board=$(board_name) - -case "$board" in -"glinet,ar150") - ucidef_set_led_wlan "wlan" "WLAN" "gl-ar150:orange:wlan" "phy0tpt" - ;; -"tplink,tl-wr1043nd-v1") - ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1" - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" - ;; -esac - -board_config_flush - -exit 0 diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network deleted file mode 100644 index 941d2ab..0000000 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ /dev/null @@ -1,44 +0,0 @@ -#!/bin/sh - -. /lib/functions/system.sh -. /lib/functions/uci-defaults.sh - -ath79_setup_interfaces() -{ - local board="$1" - - case "$board" in - "ubnt,unifi") - ucidef_set_interface_lan "eth0" - ;; - - "tplink,tl-wr1043nd-v1") - ucidef_add_switch "switch0" \ - "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0" - ;; - "netgear,wndr3800") - ucidef_set_interfaces_lan_wan "eth0" "eth1" - ucidef_add_switch "switch0" \ - "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u@eth0" - - ucidef_add_switch_attr "switch0" "blinkrate" 2 - ucidef_add_switch_port_attr "switch0" 1 led 6 - ucidef_add_switch_port_attr "switch0" 2 led 9 - ucidef_add_switch_port_attr "switch0" 5 led 2 - ;; - "buffalo,wzr-hp-g450h") - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" - ;; - *) - ucidef_set_interfaces_lan_wan "eth0" "eth1" - ;; - esac -} - -board_config_update -board=$(board_name) -ath79_setup_interfaces $board -board_config_flush - -exit 0 diff --git a/target/linux/ath79/base-files/etc/diag.sh b/target/linux/ath79/base-files/etc/diag.sh deleted file mode 100644 index c9b32df..0000000 --- a/target/linux/ath79/base-files/etc/diag.sh +++ /dev/null @@ -1,38 +0,0 @@ -#!/bin/sh - -. /lib/functions/leds.sh - -get_status_led() { - local board=$(board_name) - - case $board in - "glinet,ar150") - status_led="gl-ar150:orange:wlan" - ;; - "tplink,tl-wr1043nd-v1") - status_led="tp-link:green:system" - ;; - "ubnt,unifi") - status_led="ubnt:green:dome" - ;; - esac -} - -set_state() { - get_status_led - - case "$1" in - preinit) - status_led_blink_preinit - ;; - failsafe) - status_led_blink_failsafe - ;; - preinit_regular) - status_led_blink_preinit_regular - ;; - done) - status_led_on - ;; - esac -} diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom deleted file mode 100644 index fc15cae..0000000 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ /dev/null @@ -1,40 +0,0 @@ -#!/bin/sh - -[ -e /lib/firmware/$FIRMWARE ] && exit 0 - -. /lib/functions.sh -. /lib/functions/system.sh - -ath9k_eeprom_die() { - echo "ath9k eeprom: " "$*" - exit 1 -} - -ath9k_eeprom_extract() { - local part=$1 - local offset=$2 - local count=$3 - local mtd - - mtd=$(find_mtd_chardev $part) - [ -n "$mtd" ] || \ - ath9k_eeprom_die "no mtd device found for partition $part" - - dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \ - ath9k_eeprom_die "failed to extract from $mtd" -} - -board=$(board_name) - -case "$FIRMWARE" in -"ath9k-eeprom-pci-0000:00:00.0.bin") - case $board in - "ubnt,unifi") - ath9k_eeprom_extract "art" 4096 2048 - ;; - *) - ath9k_eeprom_die "board $board is not supported yet" - ;; - esac - ;; -esac diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata deleted file mode 100644 index 2bbe592..0000000 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ /dev/null @@ -1,58 +0,0 @@ -#!/bin/sh - -ath10kcal_die() { - echo "ath10cal: " "$*" - exit 1 -} - -ath10kcal_from_file() { - local source=$1 - local offset=$2 - local count=$3 - - dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \ - ath10kcal_die "failed to extract calibration data from $source" -} - -ath10kcal_extract() { - local part=$1 - local offset=$2 - local count=$3 - local mtd - - mtd=$(find_mtd_chardev $part) - [ -n "$mtd" ] || \ - ath10kcal_die "no mtd device found for partition $part" - - dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \ - ath10kcal_die "failed to extract calibration data from $mtd" -} - -ath10kcal_patch_mac() { - local mac=$1 - - [ -z "$mac" ] && return - - macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6 -} - -[ -e /lib/firmware/$FIRMWARE ] && exit 0 - -. /lib/functions.sh -. /lib/functions/system.sh - -board=$(board_name) - -case "$FIRMWARE" in -"ath10k/cal-pci-0000:00:00.0.bin") - case $board in - openmesh,om5p-ac-v2) - ath10kcal_extract "ART" 20480 2116 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) - ;; - esac - ;; -*) - exit 1 - ;; -esac diff --git a/target/linux/ath79/base-files/lib/upgrade/platform.sh b/target/linux/ath79/base-files/lib/upgrade/platform.sh deleted file mode 100644 index b2b55e6..0000000 --- a/target/linux/ath79/base-files/lib/upgrade/platform.sh +++ /dev/null @@ -1,224 +0,0 @@ -# -# Copyright (C) 2011 OpenWrt.org -# - -. /lib/functions/system.sh - -PART_NAME=firmware -RAMFS_COPY_BIN='nandwrite' - -CI_BLKSZ=65536 -CI_LDADR=0x80060000 - -PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD=0 - -platform_find_partitions() { - local first dev size erasesize name - while read dev size erasesize name; do - name=${name#'"'}; name=${name%'"'} - case "$name" in - vmlinux.bin.l7|vmlinux|kernel|linux|linux.bin|rootfs|filesystem) - if [ -z "$first" ]; then - first="$name" - else - echo "$erasesize:$first:$name" - break - fi - ;; - esac - done < /proc/mtd -} - -platform_find_kernelpart() { - local part - for part in "${1%:*}" "${1#*:}"; do - case "$part" in - vmlinux.bin.l7|vmlinux|kernel|linux|linux.bin) - echo "$part" - break - ;; - esac - done -} - -platform_find_rootfspart() { - local part - for part in "${1%:*}" "${1#*:}"; do - [ "$part" != "$2" ] && echo "$part" && break - done -} - -platform_do_upgrade_combined() { - local partitions=$(platform_find_partitions) - local kernelpart=$(platform_find_kernelpart "${partitions#*:}") - local erase_size=$((0x${partitions%%:*})); partitions="${partitions#*:}" - local kern_length=0x$(dd if="$1" bs=2 skip=1 count=4 2>/dev/null) - local kern_blocks=$(($kern_length / $CI_BLKSZ)) - local root_blocks=$((0x$(dd if="$1" bs=2 skip=5 count=4 2>/dev/null) / $CI_BLKSZ)) - - if [ -n "$partitions" ] && [ -n "$kernelpart" ] && \ - [ ${kern_blocks:-0} -gt 0 ] && \ - [ ${root_blocks:-0} -gt 0 ] && \ - [ ${erase_size:-0} -gt 0 ]; - then - local rootfspart=$(platform_find_rootfspart "$partitions" "$kernelpart") - local append="" - [ -f "$CONF_TAR" -a "$SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR" - - if [ "$PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD" -ne 1 ]; then - ( dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null; \ - dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null ) | \ - mtd -r $append -F$kernelpart:$kern_length:$CI_LDADR,rootfs write - $partitions - elif [ -n "$rootfspart" ]; then - dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null | \ - mtd write - $kernelpart - dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null | \ - mtd -r $append write - $rootfspart - fi - fi - PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD=0 -} - -tplink_get_image_hwid() { - get_image "$@" | dd bs=4 count=1 skip=16 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' -} - -tplink_get_image_mid() { - get_image "$@" | dd bs=4 count=1 skip=17 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' -} - -tplink_get_image_boot_size() { - get_image "$@" | dd bs=4 count=1 skip=37 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' -} - -tplink_pharos_check_image() { - local magic_long="$(get_magic_long "$1")" - [ "$magic_long" != "7f454c46" ] && { - echo "Invalid image magic '$magic_long'" - return 1 - } - - local model_string="$(tplink_pharos_get_model_string)" - local line - - # Here $1 is given to dd directly instead of get_image as otherwise the skip - # will take almost a second (as dd can't seek then) - # - # This will fail if the image isn't local, but that's fine: as the - # read loop won't be executed at all, it will return true, so the image - # is accepted (loading the first 1.5M of a remote image for this check seems - # a bit extreme) - dd if="$1" bs=1 skip=1511432 count=1024 2>/dev/null | while read line; do - [ "$line" = "$model_string" ] && break - done || { - echo "Unsupported image (model not in support-list)" - return 1 - } - - return 0 -} - -seama_get_type_magic() { - get_image "$@" | dd bs=1 count=4 skip=53 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' -} - -wrgg_get_image_magic() { - get_image "$@" | dd bs=4 count=1 skip=8 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' -} - -cybertan_get_image_magic() { - get_image "$@" | dd bs=8 count=1 skip=0 2>/dev/null | hexdump -v -n 8 -e '1/1 "%02x"' -} - -cybertan_check_image() { - local magic="$(cybertan_get_image_magic "$1")" - local fw_magic="$(cybertan_get_hw_magic)" - - [ "$fw_magic" != "$magic" ] && { - echo "Invalid image, ID mismatch, got:$magic, but need:$fw_magic" - return 1 - } - - return 0 -} - -platform_do_upgrade_compex() { - local fw_file=$1 - local fw_part=$PART_NAME - local fw_mtd=$(find_mtd_part $fw_part) - local fw_length=0x$(dd if="$fw_file" bs=2 skip=1 count=4 2>/dev/null) - local fw_blocks=$(($fw_length / 65536)) - - if [ -n "$fw_mtd" ] && [ ${fw_blocks:-0} -gt 0 ]; then - local append="" - [ -f "$CONF_TAR" -a "$SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR" - - sync - dd if="$fw_file" bs=64k skip=1 count=$fw_blocks 2>/dev/null | \ - mtd $append write - "$fw_part" - fi -} - -alfa_check_image() { - local magic_long="$(get_magic_long "$1")" - local fw_part_size=$(mtd_get_part_size firmware) - - case "$magic_long" in - "27051956") - [ "$fw_part_size" != "16318464" ] && { - echo "Invalid image magic \"$magic_long\" for $fw_part_size bytes" - return 1 - } - ;; - "68737173") - [ "$fw_part_size" != "7929856" ] && { - echo "Invalid image magic \"$magic_long\" for $fw_part_size bytes" - return 1 - } - ;; - esac - - return 0 -} - -platform_check_image() { - local board=$(board_name) - local magic="$(get_magic_word "$1")" - local magic_long="$(get_magic_long "$1")" - - [ "$#" -gt 1 ] && return 1 - - case "$board" in - "ubnt,unifi") - [ "$magic" != "2705" ] && { - echo "Invalid image type." - return 1 - } - - return 0 - ;; - esac - - echo "Sysupgrade is not yet supported on $board." - return 1 -} - -platform_do_upgrade() { - local board=$(board_name) - - case "$board" in - *) - default_do_upgrade "$ARGV" - ;; - esac -} - -disable_watchdog() { - killall watchdog - ( ps | grep -v 'grep' | grep '/dev/watchdog' ) && { - echo 'Could not disable watchdog' - return 1 - } -} - -append sysupgrade_pre_upgrade disable_watchdog diff --git a/target/linux/ath79/config-4.14 b/target/linux/ath79/config-4.14 deleted file mode 100644 index aa0ac2d..0000000 --- a/target/linux/ath79/config-4.14 +++ /dev/null @@ -1,240 +0,0 @@ -CONFIG_AG71XX=y -# CONFIG_AG71XX_DEBUG is not set -CONFIG_AG71XX_DEBUG_FS=y -CONFIG_AR8216_PHY=y -CONFIG_AR8216_PHY_LEDS=y -CONFIG_ARCH_BINFMT_ELF_STATE=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_DISCARD_MEMBLOCK=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set -CONFIG_ARCH_HAS_RESET_CONTROLLER=y -# CONFIG_ARCH_HAS_SG_CHAIN is not set -# CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is not set -# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y -CONFIG_ARCH_MMAP_RND_BITS_MAX=15 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15 -# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set -# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_QUEUED_RWLOCKS=y -CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_AT803X_PHY=y -CONFIG_ATH79=y -CONFIG_ATH79_WDT=y -CONFIG_CEVT_R4K=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE="rootfstype=squashfs,jffs2" -CONFIG_CMDLINE_BOOL=y -# CONFIG_CMDLINE_OVERRIDE is not set -CONFIG_COMMON_CLK=y -# CONFIG_COMMON_CLK_BOSTON is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_GENERIC_DUMP_TLB=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_RIXI=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R2=y -CONFIG_CPU_MIPSR2=y -CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y -CONFIG_CPU_R4K_CACHE_TLB=y -CONFIG_CPU_R4K_FPU=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CPU_SUPPORTS_MSA=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_CSRC_R4K=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DTC=y -CONFIG_EARLY_PRINTK=y -CONFIG_ETHERNET_PACKET_MANGLE=y -CONFIG_FIXED_PHY=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GPIOLIB=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_74X164=y -CONFIG_GPIO_ATH79=y -CONFIG_GPIO_GENERIC=y -CONFIG_GPIO_SYSFS=y -# CONFIG_GRO_CELLS is not set -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -# CONFIG_HAVE_ARCH_BITREVERSE is not set -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_CBPF_JIT=y -CONFIG_HAVE_CC_STACKPROTECTOR=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_COPY_THREAD_TLS=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DEBUG_STACKOVERFLOW=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_KVM=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MEMBLOCK_NODE_MAP=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HW_HAS_PCI=y -CONFIG_HZ_PERIODIC=y -CONFIG_IMAGE_CMDLINE_HACK=y -CONFIG_INITRAMFS_COMPRESSION="" -CONFIG_INITRAMFS_ROOT_GID=0 -CONFIG_INITRAMFS_ROOT_UID=0 -CONFIG_INITRAMFS_SOURCE="../../root" -CONFIG_IP17XX_PHY=y -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_MIPS_CPU=y -CONFIG_IRQ_WORK=y -CONFIG_LEDS_GPIO=y -# CONFIG_LEDS_RESET is not set -CONFIG_LIBFDT=y -CONFIG_MARVELL_PHY=y -CONFIG_MDIO_BITBANG=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_GPIO=y -CONFIG_MFD_SYSCON=y -CONFIG_MICREL_PHY=y -CONFIG_MIPS=y -CONFIG_MIPS_ASID_BITS=8 -CONFIG_MIPS_ASID_SHIFT=0 -CONFIG_MIPS_CLOCK_VSYSCALL=y -# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set -# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set -# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set -CONFIG_MIPS_CMDLINE_FROM_DTB=y -# CONFIG_MIPS_ELF_APPENDED_DTB is not set -# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MACHINE is not set -# CONFIG_MIPS_NO_APPENDED_DTB is not set -CONFIG_MIPS_RAW_APPENDED_DTB=y -CONFIG_MIPS_SPRAM=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_CFI_I2 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_M25P80=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_SPLIT_LZMA_FW=y -CONFIG_MTD_SPLIT_SEAMA_FW=y -CONFIG_MTD_SPLIT_UIMAGE_FW=y -CONFIG_MTD_SPLIT_WRGG_FW=y -CONFIG_MTD_TPLINK_PARTS=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y -# CONFIG_NO_IOPORT_MAP is not set -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_PCI_DRIVERS_LEGACY=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -# CONFIG_PHY_AR7100_USB is not set -# CONFIG_PHY_AR7200_USB is not set -CONFIG_PINCTRL=y -CONFIG_RATIONAL=y -# CONFIG_RCU_NEED_SEGCBLIST is not set -# CONFIG_RCU_STALL_COMMON is not set -CONFIG_REGMAP=y -CONFIG_REGMAP_MMIO=y -CONFIG_RESET_ATH79=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RTL8366S_PHY=y -CONFIG_RTL8366_SMI=y -# CONFIG_SCHED_INFO is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_8250_FSL is not set -CONFIG_SERIAL_8250_NR_UARTS=1 -CONFIG_SERIAL_8250_RUNTIME_UARTS=1 -CONFIG_SERIAL_AR933X=y -CONFIG_SERIAL_AR933X_CONSOLE=y -CONFIG_SERIAL_AR933X_NR_UARTS=2 -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SPI=y -CONFIG_SPI_ATH79=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_GPIO=y -CONFIG_SPI_MASTER=y -# CONFIG_SPI_RB4XX is not set -CONFIG_SRCU=y -CONFIG_SWCONFIG=y -CONFIG_SWCONFIG_LEDS=y -CONFIG_SWPHY=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_MIPS16=y -CONFIG_SYS_SUPPORTS_ZBOOT=y -CONFIG_SYS_SUPPORTS_ZBOOT_UART_PROM=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TINY_SRCU=y -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y diff --git a/target/linux/ath79/dts/ar7100.dtsi b/target/linux/ath79/dts/ar7100.dtsi deleted file mode 100644 index 9957b8d..0000000 --- a/target/linux/ath79/dts/ar7100.dtsi +++ /dev/null @@ -1,204 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include <dt-bindings/clock/ath79-clk.h> -#include "ath79.dtsi" - -/ { - compatible = "qca,ar7100"; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "mips,mips24Kc"; - clocks = <&pll ATH79_CLK_CPU>; - reg = <0>; - }; - }; - - ahb { - apb { - ddr_ctrl: memory-controller@18000000 { - compatible = "qca,ar7100-ddr-controller"; - reg = <0x18000000 0x100>; - - #qca,ddr-wb-channel-cells = <1>; - }; - - uart: uart@18020000 { - compatible = "ns16550a"; - reg = <0x18020000 0x20>; - interrupts = <3>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "uart"; - - reg-io-width = <4>; - reg-shift = <2>; - no-loopback-test; - - status = "disabled"; - }; - - usb_phy: usb-phy@18030000 { - compatible = "qca,ar7100-usb-phy"; - reg = <0x18030000 0x10>; - - reset-names = "usb-phy", "usb-host", "usb-ohci-dll"; - resets = <&rst 4>, <&rst 5>, <&rst 6>; - - #phy-cells = <0>; - - status = "disabled"; - }; - - gpio: gpio@18040000 { - compatible = "qca,ar7100-gpio"; - reg = <0x18040000 0x30>; - interrupts = <2>; - - ngpios = <16>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - pll: pll-controller@18050000 { - compatible = "qca,ar7100-pll", "syscon"; - reg = <0x18050000 0x20>; - - clock-names = "ref"; - /* The board must provides the ref clock */ - - #clock-cells = <1>; - clock-output-names = "cpu", "ddr", "ahb"; - }; - - wdt: wdt@18060008 { - compatible = "qca,ar7130-wdt"; - reg = <0x18060008 0x8>; - - interrupts = <4>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "wdt"; - }; - - - rst: reset-controller@18060024 { - compatible = "qca,ar7100-reset"; - reg = <0x18060024 0x4>; - - #reset-cells = <1>; - }; - - pcie0: pcie-controller@180c0000 { - compatible = "qca,ar7100-pci"; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x0 0x0>; - reg = <0x17010000 0x100>; - reg-names = "cfg_base"; - ranges = <0x2000000 0 0x10000000 0x10000000 0 0x07000000 /* pci memory */ - 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */ - interrupt-parent = <&cpuintc>; - interrupts = <2>; - - interrupt-controller; - #interrupt-cells = <1>; - - interrupt-map-mask = <0 0 0 1>; - interrupt-map = <0 0 0 0 &pcie0 0>; - status = "disabled"; - }; - }; - }; - - usb2: usb@1b000000 { - compatible = "generic-ehci"; - reg = <0x1b000000 0x1000>; - - interrupt-parent = <&cpuintc>; - interrupts = <3>; - - phy-names = "usb-phy"; - phys = <&usb_phy>; - - has-synopsys-hc-bug; - - status = "disabled"; - }; - - usb1: usb@1c000000 { - compatible = "generic-ohci"; - reg = <0x1c000000 0x1000>; - - interrupt-parent = <&miscintc>; - interrupts = <6>; - - phy-names = "usb-phy"; - phys = <&usb_phy>; - - status = "disabled"; - }; - - spi: spi@1f000000 { - compatible = "qca,ar7100-spi"; - reg = <0x1f000000 0x10>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "ahb"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; -}; - -&cpuintc { - qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>; - qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>, - <&ddr_ctrl 0>, <&ddr_ctrl 1>; -}; - -&miscintc { - compatible = "qca,ar7100-misc-intc"; -}; - -ð0 { - compatible = "qca,ar7100-eth"; - reg = <0x19000000 0x200 - 0x18070000 0x4>; - - pll-data = <0x00110000 0x00001099 0x00991099>; - pll-reg = <0x4 0x10 17>; - pll-handle = <&pll>; - phy-mode = "rgmii"; - - resets = <&rst 8>, <&rst 9>; - reset-names = "phy", "mac"; -}; - -&mdio1 { - builtin-switch; -}; - -ð1 { - compatible = "qca,ar7100-eth"; - reg = <0x1a000000 0x200 - 0x18070004 0x4>; - - pll-data = <0x00110000 0x00001099 0x00991099>; - pll-reg = <0x4 0x14 19>; - pll-handle = <&pll>; - - phy-mode = "rgmii"; - - resets = <&rst 12>, <&rst 13>; - reset-names = "phy", "mac"; -}; diff --git a/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts b/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts deleted file mode 100644 index a175fd7..0000000 --- a/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts +++ /dev/null @@ -1,192 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "ar7100.dtsi" - -/ { - compatible = "netgear,wndr3800", "qca,ar7161"; - model = "Netgear WNDR3800"; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - extosc: ref { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-output-names = "ref"; - clock-frequency = <40000000>; - }; - - reset-leds { - compatible = "reset-leds"; - - wps { - label = "netgear:green:usb"; - resets = <&rst 12>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - wps { - label = "netgear:orange:wps"; - gpios = <&gpio 0 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - power_green { - label = "netgear:green:power"; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - power_orange { - label = "netgear:orange:power"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - wps_green { - label = "netgear:green:wps"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - wan_green { - label = "netgear:green:wan"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - button@0 { - label = "wps"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&gpio 3 GPIO_ACTIVE_LOW>; - }; - - button@1 { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 18 GPIO_ACTIVE_LOW>; - }; - - button@2 { - label = "wifi"; - linux,code = <BTN_2>; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - }; - }; - - rtl8366s { - compatible = "realtek,rtl8366s"; - gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>; - gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>; - - mdio-bus { - status = "okay"; - - phy-mask = <0x10>; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "rgmii"; - }; - }; - }; -}; - -&usb_phy { - status = "okay"; -}; - -&usb1 { - status = "okay"; -}; - -&usb2 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; - -&uart { - status = "okay"; -}; - -&spi { - status = "okay"; - num-cs = <1>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mx25l12805d"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x050000>; - read-only; - }; - - partition@1 { - label = "u-boot-env"; - reg = <0x050000 0x020000>; - }; - - partition@2 { - label = "firmware"; - reg = <0x70000 0xf80000>; - }; - - partition@3 { - label = "art"; - reg = <0xff0000 0x010000>; - read-only; - }; - }; - }; -}; - -ð0 { - status = "okay"; - - pll-data = <0x11110000 0x00001099 0x00991099>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -ð1 { - status = "okay"; - - pll-data = <0x11110000 0x00001099 0x00991099>; - - resets = <&rst 13>; - reset-names = "mac"; - - phy-handle = <&phy4>; -}; diff --git a/target/linux/ath79/dts/ar7241.dtsi b/target/linux/ath79/dts/ar7241.dtsi deleted file mode 100644 index 91ebea5..0000000 --- a/target/linux/ath79/dts/ar7241.dtsi +++ /dev/null @@ -1,78 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "ar724x.dtsi" - -/ { - usb_phy: usb-phy { - compatible = "qca,ar7200-usb-phy"; - - reset-names = "usb-phy", "usb-suspend-override"; - resets = <&rst 4>, <&rst 3>; - - #phy-cells = <0>; - - status = "disabled"; - }; -}; - -&gpio { - ngpios = <20>; -}; - -&ahb { - usb: usb@1b000000 { - compatible = "generic-ehci"; - reg = <0x1b000000 0x1000>; - - interrupts = <3>; - - resets = <&rst 5>; - reset-names = "usb-host"; - - has-transaction-translator; - caps-offset = <0x100>; - - phy-names = "usb-phy"; - phys = <&usb_phy>; - - status = "disabled"; - }; -}; - -&mdio0 { - regmap = <ð1>; - builtin-switch; - resets = <&rst 22>; - reset-names = "mdio"; -}; - -ð0 { - compatible = "qca,ar7241-eth", "syscon"; - - pll-data = <0x00110000 0x00001099 0x00991099>; - - resets = <&rst 8>, <&rst 9>; - reset-names = "mac", "phy"; -}; - -&mdio1 { - resets = <&rst 23>; - reset-names = "mdio"; - builtin-switch; -}; - -ð1 { - compatible = "qca,ar7241-eth", "syscon"; - - pll-data = <0x00110000 0x00001099 0x00991099>; - - resets = <&rst 12>, <&rst 13>; - reset-names = "mac", "phy"; - - phy-mode = "gmii"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; diff --git a/target/linux/ath79/dts/ar7241_ubnt-bullet-m.dts b/target/linux/ath79/dts/ar7241_ubnt-bullet-m.dts deleted file mode 100644 index 067c612..0000000 --- a/target/linux/ath79/dts/ar7241_ubnt-bullet-m.dts +++ /dev/null @@ -1,13 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include "ar7241_ubnt-xm.dtsi" - -/ { - compatible = "ubnt,xm", "qca,ar7241"; - model = "Ubiquiti Bullet M"; -}; - -ð1 { - compatible = "syscon"; -}; diff --git a/target/linux/ath79/dts/ar7241_ubnt-nano-m.dts b/target/linux/ath79/dts/ar7241_ubnt-nano-m.dts deleted file mode 100644 index 8fbd7a6..0000000 --- a/target/linux/ath79/dts/ar7241_ubnt-nano-m.dts +++ /dev/null @@ -1,9 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include "ar7241_ubnt-xm.dtsi" - -/ { - compatible = "ubnt,nm", "qca,ar7241"; - model = "Ubiquiti Nanostation M"; -}; diff --git a/target/linux/ath79/dts/ar7241_ubnt-rocket-m.dts b/target/linux/ath79/dts/ar7241_ubnt-rocket-m.dts deleted file mode 100644 index e1ef6d7..0000000 --- a/target/linux/ath79/dts/ar7241_ubnt-rocket-m.dts +++ /dev/null @@ -1,21 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include "ar7241_ubnt-xm.dtsi" - -/ { - compatible = "ubnt,rm", "qca,ar7241"; - model = "Ubiquiti Rocket M"; -}; - -ð1 { - compatible = "syscon"; -}; - -&usb_phy { - status = "okay"; -}; - -&usb { - status = "okay"; -}; diff --git a/target/linux/ath79/dts/ar7241_ubnt-unifi.dts b/target/linux/ath79/dts/ar7241_ubnt-unifi.dts deleted file mode 100644 index 1cb45e6..0000000 --- a/target/linux/ath79/dts/ar7241_ubnt-unifi.dts +++ /dev/null @@ -1,142 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "ar7241.dtsi" - -/ { - compatible = "ubnt,unifi", "qca,ar7241"; - model = "Ubiquiti UniFi AP"; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - extosc: ref { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <40000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - - poll-interval = <20>; - button@0 { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 12 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - }; - - leds { - compatible = "gpio-leds"; - led@0 { - label = "ubnt:green:dome"; - gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; - }; - - led@1 { - label = "ubnt:orange:dome"; - gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&uart { - status = "okay"; -}; - -&pll { - clocks = <&extosc>; -}; - -&spi { - status = "okay"; - num-cs = <1>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mx25l6405d"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x040000>; - read-only; - }; - - partition@1 { - label = "u-boot-env"; - reg = <0x040000 0x010000>; - }; - - partition@2 { - label = "firmware"; - reg = <0x050000 0x750000>; - }; - - partition@3 { - label = "board_config"; - reg = <0x7a0000 0x010000>; - read-only; - }; - - partition@4 { - label = "cfg"; - reg = <0x7b0000 0x040000>; - read-only; - }; - - art: partition@5 { - label = "art"; - reg = <0x7f0000 0x010000>; - read-only; - }; - }; - }; -}; - -&pcie { - status = "okay"; - - ath9k@0000 { - reg = <0x0000 0 0 0 0>; - qca,no-eeprom; - }; -}; - -&mdio0 { - status = "okay"; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "mii"; - }; -}; - -ð0 { - status = "okay"; - - mtd-mac-address = <&art 0x0>; - phy-handle = <&phy4>; -}; - -ð1 { - status = "okay"; - - compatible = "syscon"; -}; diff --git a/target/linux/ath79/dts/ar7241_ubnt-xm.dts b/target/linux/ath79/dts/ar7241_ubnt-xm.dts deleted file mode 100644 index efb01f7..0000000 --- a/target/linux/ath79/dts/ar7241_ubnt-xm.dts +++ /dev/null @@ -1,13 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include "ar7241_ubnt-xm.dtsi" - -/ { - compatible = "ubnt,xm", "qca,ar7241"; - model = "Ubiquiti Networks XM (rev 1.0) board"; -}; - -ð1 { - compatible = "syscon"; -}; diff --git a/target/linux/ath79/dts/ar7241_ubnt-xm.dtsi b/target/linux/ath79/dts/ar7241_ubnt-xm.dtsi deleted file mode 100644 index bea9adc..0000000 --- a/target/linux/ath79/dts/ar7241_ubnt-xm.dtsi +++ /dev/null @@ -1,153 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "ar7241.dtsi" - -/ { - compatible = "ubnt,xm", "qca,ar7241"; - model = "Ubiquiti Networks XM (rev 1.0) board"; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x2000000>; - }; - -/* extosc: ref { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <40000000>; - }; -*/ - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - - poll-interval = <20>; - button@0 { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 12 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - }; - - leds { - compatible = "gpio-leds"; - led@0 { - label = "ubnt:red:link1"; - gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; - }; - - led@1 { - label = "ubnt:orange:link2"; - gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; - }; - - led@2 { - label = "ubnt:green:link3"; - gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; - }; - - led@3 { - label = "ubnt:green:link4"; - gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&uart { - status = "okay"; -}; - -/*&pll { - clocks = <&extosc>; -};*/ - -&spi { - status = "okay"; - num-cs = <1>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mx25l6405d"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x040000>; - read-only; - }; - - partition@1 { - label = "u-boot-env"; - reg = <0x040000 0x010000>; - }; - - partition@2 { - label = "firmware"; - reg = <0x050000 0x750000>; - }; - - partition@3 { - label = "board_config"; - reg = <0x7a0000 0x010000>; - read-only; - }; - - partition@4 { - label = "cfg"; - reg = <0x7b0000 0x040000>; - read-only; - }; - - art: partition@5 { - label = "art"; - reg = <0x7f0000 0x010000>; - read-only; - }; - }; - }; -}; - -&pcie { - status = "okay"; - - ath9k@0000 { - reg = <0x0000 0 0 0 0>; - qca,no-eeprom; - }; -}; - -&mdio0 { - status = "okay"; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "mii"; - }; -}; - -ð0 { - status = "okay"; - - mtd-mac-address = <&art 0x0>; - - phy-mode = "mii"; - phy-handle = <&phy4>; -}; - -ð1 { - status = "okay"; - - mtd-mac-address = <&art 0x6>; -}; diff --git a/target/linux/ath79/dts/ar7242.dtsi b/target/linux/ath79/dts/ar7242.dtsi deleted file mode 100644 index a5909a9..0000000 --- a/target/linux/ath79/dts/ar7242.dtsi +++ /dev/null @@ -1,69 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "ar724x.dtsi" - -/ { - usb_phy: usb-phy { - compatible = "qca,ar7200-usb-phy"; - - reset-names = "usb-phy", "usb-suspend-override"; - resets = <&rst 4>, <&rst 3>; - - #phy-cells = <0>; - - status = "disabled"; - }; -}; - -&gpio { - ngpios = <20>; -}; - -&ahb { - usb: usb@1b000000 { - compatible = "generic-ehci"; - reg = <0x1b000000 0x1000>; - - interrupts = <3>; - - resets = <&rst 5>; - reset-names = "usb-host"; - - has-transaction-translator; - caps-offset = <0x100>; - - phy-names = "usb-phy"; - phys = <&usb_phy>; - - status = "disabled"; - }; -}; - -&mdio0 { - resets = <&rst 22>; - reset-names = "mdio"; -}; - -ð0 { - compatible = "qca,ar7242-eth", "syscon"; - - pll-data = <0x16000000 0x00000101 0x00001616>; - pll-reg = <0x4 0x2c 17>; - pll-handle = <&pll>; - - resets = <&rst 8>, <&rst 9>; - reset-names = "mac", "phy"; -}; - -&mdio1 { - resets = <&rst 23>; - reset-names = "mdio"; - builtin-switch; -}; - -ð1 { - compatible = "qca,ar7242-eth", "syscon"; - - resets = <&rst 12>, <&rst 13>; - reset-names = "mac", "phy"; -}; diff --git a/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts b/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts deleted file mode 100644 index 4e52e30..0000000 --- a/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts +++ /dev/null @@ -1,127 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "ar7242.dtsi" - -/ { - compatible = "buffalo,wzr-hp-g450h", "qca,ar7242"; - model = "Buffalo WZR-HP-G450H"; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - - poll-interval = <20>; - button@0 { - label = "usb"; - linux,code = <BTN_2>; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - - button@1 { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - - button@2 { - label = "movie_engine"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; - debounce-interval = <60>; - }; - - button@3 { - label = "aoss"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&gpio 8 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - - button@4 { - label = "router_off"; - linux,code = <BTN_5>; - gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; - debounce-interval = <60>; - }; - - }; - - leds { - compatible = "gpio-leds"; - led@0 { - label = "buffalo:orange:security"; - gpios = <&gpio 13 GPIO_ACTIVE_LOW>; - }; - - led@1 { - label = "buffalo:red:diag"; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-export { - compatible = "gpio-export"; - #size-cells = <0>; - - gpio_usb_power { - gpio-export,name = "wzr-hp-g450h:usb-power"; - gpio-export,output = <1>; - gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&mdio0 { - status = "okay"; - phy-mask = <0x1>; - - phy0: ethernet-phy@0 { - reg = <0>; - phy-mode = "rgmii"; - }; -}; - -ð0 { - status = "okay"; - - phy-mode = "rgmii"; - pll-data = <0x62000000 0 0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&uart { - status = "okay"; -}; - -&usb_phy { - status = "okay"; -}; - -&usb { - status = "okay"; -}; - -&pcie { - status = "okay"; - - ath9k@0000 { - reg = <0x0000 0 0 0 0>; - qca,no-eeprom; - }; -}; diff --git a/target/linux/ath79/dts/ar724x.dtsi b/target/linux/ath79/dts/ar724x.dtsi deleted file mode 100644 index 4108745..0000000 --- a/target/linux/ath79/dts/ar724x.dtsi +++ /dev/null @@ -1,140 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include <dt-bindings/clock/ath79-clk.h> -#include "ath79.dtsi" - -/ { - compatible = "qca,ar7240"; - - #address-cells = <1>; - #size-cells = <1>; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "mips,mips24Kc"; - clocks = <&pll ATH79_CLK_CPU>; - reg = <0>; - }; - }; - - ahb: ahb { - apb { - ddr_ctrl: memory-controller@18000000 { - compatible = "qca,ar9132-ddr-controller", - "qca,ar7240-ddr-controller"; - reg = <0x18000000 0x100>; - - #qca,ddr-wb-channel-cells = <1>; - }; - - uart: uart@18020000 { - compatible = "ns16550a"; - reg = <0x18020000 0x20>; - interrupts = <3>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "uart"; - - reg-io-width = <4>; - reg-shift = <2>; - no-loopback-test; - - status = "disabled"; - }; - - gpio: gpio@18040000 { - compatible = "qca,ar7240-gpio", - "qca,ar7100-gpio"; - reg = <0x18040000 0x30>; - interrupts = <2>; - - ngpios = <18>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - pll: pll-controller@18050000 { - compatible = "qca,ar7240-pll", - "qca,ar7240-pll"; - reg = <0x18050000 0x20>; - - clock-names = "ref"; - /* The board must provides the ref clock */ - - #clock-cells = <1>; - clock-output-names = "cpu", "ddr", "ahb"; - }; - - wdt: wdt@18060008 { - compatible = "qca,ar7130-wdt"; - reg = <0x18060008 0x8>; - - interrupts = <4>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "wdt"; - }; - - rst: reset-controller@1806001c { - compatible = "qca,ar7240-reset", - "qca,ar7100-reset"; - reg = <0x1806001c 0x4>; - - #reset-cells = <1>; - }; - - pcie: pcie-controller@180c0000 { - compatible = "qcom,ar7240-pci"; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x0 0x0>; - reg = <0x180c0000 0x1000>, /* CRP */ - <0x180f0000 0x100>, /* CTRL */ - <0x14000000 0x1000>; /* CFG */ - reg-names = "crp_base", "ctrl_base", "cfg_base"; - ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */ - 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */ - interrupt-parent = <&cpuintc>; - interrupts = <2>; - - interrupt-controller; - #interrupt-cells = <1>; - - interrupt-map-mask = <0 0 0 1>; - interrupt-map = <0 0 0 0 &pcie 0>; - status = "disabled"; - }; - }; - - spi: spi@1f000000 { - compatible = "qca,ar7240-spi", - "qca,ar7100-spi"; - reg = <0x1f000000 0x10>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "ahb"; - - status = "disabled"; - - #address-cells = <1>; - #size-cells = <0>; - }; - }; -}; - -&cpuintc { - qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>; - qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>, - <&ddr_ctrl 0>, <&ddr_ctrl 1>; -}; diff --git a/target/linux/ath79/dts/ar9132.dtsi b/target/linux/ath79/dts/ar9132.dtsi deleted file mode 100644 index 7a7a5f1..0000000 --- a/target/linux/ath79/dts/ar9132.dtsi +++ /dev/null @@ -1,171 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include <dt-bindings/clock/ath79-clk.h> - -/ { - compatible = "qca,ar9132"; - - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "mips,mips24Kc"; - clocks = <&pll ATH79_CLK_CPU>; - reg = <0>; - }; - }; - - cpuintc: interrupt-controller { - compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc"; - - interrupt-controller; - #interrupt-cells = <1>; - - qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>; - qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>, - <&ddr_ctrl 0>, <&ddr_ctrl 1>; - }; - - ahb { - compatible = "simple-bus"; - ranges; - - #address-cells = <1>; - #size-cells = <1>; - - interrupt-parent = <&cpuintc>; - - apb { - compatible = "simple-bus"; - ranges; - - #address-cells = <1>; - #size-cells = <1>; - - interrupt-parent = <&miscintc>; - - ddr_ctrl: memory-controller@18000000 { - compatible = "qca,ar9132-ddr-controller", - "qca,ar7240-ddr-controller"; - reg = <0x18000000 0x100>; - - #qca,ddr-wb-channel-cells = <1>; - }; - - uart: uart@18020000 { - compatible = "ns8250"; - reg = <0x18020000 0x20>; - interrupts = <3>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "uart"; - - reg-io-width = <4>; - reg-shift = <2>; - no-loopback-test; - - status = "disabled"; - }; - - gpio: gpio@18040000 { - compatible = "qca,ar9132-gpio", - "qca,ar7100-gpio"; - reg = <0x18040000 0x30>; - interrupts = <2>; - - ngpios = <22>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - pll: pll-controller@18050000 { - compatible = "qca,ar9132-pll", - "qca,ar9130-pll"; - reg = <0x18050000 0x20>; - - clock-names = "ref"; - /* The board must provides the ref clock */ - - #clock-cells = <1>; - clock-output-names = "cpu", "ddr", "ahb"; - }; - - wdt: wdt@18060008 { - compatible = "qca,ar7130-wdt"; - reg = <0x18060008 0x8>; - - interrupts = <4>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "wdt"; - }; - - miscintc: interrupt-controller@18060010 { - compatible = "qca,ar9132-misc-intc", - "qca,ar7100-misc-intc"; - reg = <0x18060010 0x8>; - - interrupt-parent = <&cpuintc>; - interrupts = <6>; - - interrupt-controller; - #interrupt-cells = <1>; - }; - - rst: reset-controller@1806001c { - compatible = "qca,ar9132-reset", - "qca,ar7100-reset"; - reg = <0x1806001c 0x4>; - - #reset-cells = <1>; - }; - }; - - usb: usb@1b000100 { - compatible = "qca,ar7100-ehci", "generic-ehci"; - reg = <0x1b000100 0x100>; - - interrupts = <3>; - resets = <&rst 5>; - - has-transaction-translator; - - phy-names = "usb"; - phys = <&usb_phy>; - - status = "disabled"; - }; - - spi: spi@1f000000 { - compatible = "qca,ar9132-spi", "qca,ar7100-spi"; - reg = <0x1f000000 0x10>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "ahb"; - - status = "disabled"; - - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - usb_phy: usb-phy { - compatible = "qca,ar7200-usb-phy"; - - reset-names = "usb-phy", "usb-suspend-override"; - resets = <&rst 4>, <&rst 3>; - - #phy-cells = <0>; - - status = "disabled"; - }; -}; diff --git a/target/linux/ath79/dts/ar9132_tl_wr1043nd_v1.dts b/target/linux/ath79/dts/ar9132_tl_wr1043nd_v1.dts deleted file mode 100644 index c3efe66..0000000 --- a/target/linux/ath79/dts/ar9132_tl_wr1043nd_v1.dts +++ /dev/null @@ -1,120 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "ar9132.dtsi" - -/ { - compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132"; - model = "TP-Link TL-WR1043ND Version 1"; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x2000000>; - }; - - extosc: ref { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <40000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - - poll-interval = <20>; - button@0 { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 3 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - - button@1 { - label = "qss"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&gpio 7 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - }; - - leds { - compatible = "gpio-leds"; - led@0 { - label = "tp-link:green:usb"; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - }; - - led@1 { - label = "tp-link:green:system"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "heartbeat"; - }; - - led@2 { - label = "tp-link:green:qss"; - gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; - }; - - led@3 { - label = "tp-link:green:wlan"; - gpios = <&gpio 9 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&uart { - status = "okay"; -}; - -&pll { - clocks = <&extosc>; -}; - -&usb { - status = "okay"; -}; - -&usb_phy { - status = "okay"; -}; - -&spi { - status = "okay"; - num-cs = <1>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "s25sl064a"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x020000>; - read-only; - }; - - partition@1 { - label = "firmware"; - reg = <0x020000 0x7D0000>; - }; - - partition@2 { - label = "art"; - reg = <0x7F0000 0x010000>; - read-only; - }; - }; - }; -}; diff --git a/target/linux/ath79/dts/ar9330.dtsi b/target/linux/ath79/dts/ar9330.dtsi deleted file mode 100644 index 1439de1..0000000 --- a/target/linux/ath79/dts/ar9330.dtsi +++ /dev/null @@ -1,160 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include <dt-bindings/clock/ath79-clk.h> -#include "ath79.dtsi" - -/ { - compatible = "qca,ar9330"; - - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "mips,mips24Kc"; - clocks = <&pll ATH79_CLK_CPU>; - reg = <0>; - }; - }; - - chosen { - bootargs = "console=ttyATH0,115200"; - }; - - ahb { - apb { - ddr_ctrl: memory-controller@18000000 { - compatible = "qca,ar7240-ddr-controller"; - reg = <0x18000000 0x100>; - - #qca,ddr-wb-channel-cells = <1>; - }; - - uart: uart@18020000 { - compatible = "qca,ar9330-uart"; - reg = <0x18020000 0x14>; - - interrupts = <3>; - - clocks = <&pll ATH79_CLK_REF>; - clock-names = "uart"; - - status = "disabled"; - }; - - gpio: gpio@18040000 { - compatible = "qca,ar7100-gpio"; - reg = <0x18040000 0x34>; - interrupts = <2>; - - ngpios = <30>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - - status = "disabled"; - }; - - pll: pll-controller@18050000 { - compatible = "qca,ar9330-pll"; - reg = <0x18050000 0x100>; - - #clock-cells = <1>; - }; - - rst: reset-controller@1806001c { - compatible = "qca,ar7100-reset"; - reg = <0x1806001c 0x4>; - - #reset-cells = <1>; - }; - }; - - usb: usb@1b000100 { - compatible = "chipidea,usb2"; - reg = <0x1b000000 0x200>; - - interrupts = <3>; - resets = <&rst 5>; - reset-names = "usb-host"; - - phy-names = "usb-phy"; - phys = <&usb_phy>; - - status = "disabled"; - }; - - spi: spi@1f000000 { - compatible = "qca,ar7100-spi"; - reg = <0x1f000000 0x10>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "ahb"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - gmac: gmac@18070000 { - compatible = "qca,ar9330-gmac"; - reg = <0x18070000 0x4>; - }; - }; - - usb_phy: usb-phy { - compatible = "qca,ar7200-usb-phy"; - - reset-names = "usb-phy", "usb-suspend-override"; - resets = <&rst 4>, <&rst 3>; - - #phy-cells = <0>; - - status = "disabled"; - }; -}; - -&cpuintc { - qca,ddr-wb-channel-interrupts = <2>, <3>; - qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>; -}; - -ð0 { - compatible = "qca,ar9330-eth", "syscon"; - - pll-data = <0x00110000 0x00001099 0x00991099>; - - resets = <&rst 9>; - reset-names = "mac"; -}; - -&mdio0 { - regmap = <ð1>; - builtin-switch; - resets = <&rst 23>; - reset-names = "mdio"; -}; - -&mdio1 { - resets = <&rst 23>; - reset-names = "mdio"; - - builtin-switch; -}; - -ð1 { - compatible = "qca,ar9330-eth", "syscon"; - - pll-data = <0x00110000 0x00001099 0x00991099>; - phy-mode = "gmii"; - - resets = <&rst 13>; - reset-names = "mac"; -}; diff --git a/target/linux/ath79/dts/ar9330_gl_ar150.dts b/target/linux/ath79/dts/ar9330_gl_ar150.dts deleted file mode 100644 index 97beab1..0000000 --- a/target/linux/ath79/dts/ar9330_gl_ar150.dts +++ /dev/null @@ -1,162 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "ar9330.dtsi" - -/ { - model = "GL.iNet GL-AR150"; - compatible = "glinet,ar150"; - - aliases { - serial0 = &uart; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - leds { - compatible = "gpio-leds"; - - wlan { - label = "gl-ar150:orange:wlan"; - gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - lan { - label = "gl-ar150:green:lan"; - gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - wan { - label = "gl-ar150:green:wan"; - gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - manual { - label = "manual"; - linux,code = <BTN_7>; - gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; - }; - - auto { - label = "auto"; - linux,code = <BTN_8>; - gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; - }; - - reset { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&uart { - status = "okay"; -}; - -&gpio { - status = "okay"; -}; - -&usb { - dr_mode = "host"; - status = "okay"; -}; - -&usb_phy { - status = "okay"; - gpios = <&gpio 6 GPIO_ACTIVE_HIGH>; -}; - -&spi { - num-chipselects = <1>; - status = "okay"; - - spiflash { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <104000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x040000>; - read-only; - }; - - partition@1 { - label = "u-boot-env"; - reg = <0x040000 0x010000>; - }; - - partition@2 { - label = "firmware"; - reg = <0x050000 0xfa0000>; - }; - - art: partition@3 { - label = "ART"; - reg = <0xff0000 0x010000>; - read-only; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "mii"; - }; -}; - -ð0 { - status = "okay"; - - mtd-mac-address = <&art 0x0>; - - phy-handle = <&phy4>; -}; - -ð1 { - status = "okay"; - - mtd-mac-address = <&art 0x0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - - gmac-config { - device = <&gmac>; - - switch-phy-addr-swap = <0>; - switch-phy-swap = <0>; - }; -}; diff --git a/target/linux/ath79/dts/ar9331.dtsi b/target/linux/ath79/dts/ar9331.dtsi deleted file mode 100644 index b29c88a..0000000 --- a/target/linux/ath79/dts/ar9331.dtsi +++ /dev/null @@ -1,6 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include "ar9330.dtsi" - -/ { - compatible = "qca,ar9331"; -}; diff --git a/target/linux/ath79/dts/ar9331_dpt_module.dts b/target/linux/ath79/dts/ar9331_dpt_module.dts deleted file mode 100644 index bcd8636..0000000 --- a/target/linux/ath79/dts/ar9331_dpt_module.dts +++ /dev/null @@ -1,79 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "ar9331.dtsi" - -/ { - model = "DPTechnics DPT-Module"; - compatible = "dptechnics,dpt-module"; - - aliases { - serial0 = &uart; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - leds { - compatible = "gpio-leds"; - - system { - label = "dpt-module:green:system"; - gpios = <&gpio 27 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - button@0 { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&ref { - clock-frequency = <25000000>; -}; - -&uart { - status = "okay"; -}; - -&gpio { - status = "okay"; -}; - -&usb { - dr_mode = "host"; - status = "okay"; -}; - -&usb_phy { - status = "okay"; -}; - -&spi { - num-chipselects = <1>; - status = "okay"; - - /* Winbond 25Q128FVSG SPI flash */ - spiflash: w25q128@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "winbond,w25q128", "jedec,spi-nor"; - spi-max-frequency = <104000000>; - reg = <0>; - }; -}; diff --git a/target/linux/ath79/dts/ar9331_dragino_ms14.dts b/target/linux/ath79/dts/ar9331_dragino_ms14.dts deleted file mode 100644 index e7c446a..0000000 --- a/target/linux/ath79/dts/ar9331_dragino_ms14.dts +++ /dev/null @@ -1,103 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "ar9331.dtsi" - -/ { - model = "Dragino MS14 (Dragino 2)"; - compatible = "dragino,ms14"; - - aliases { - serial0 = &uart; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - leds { - compatible = "gpio-leds"; - - wlan { - label = "dragino2:red:wlan"; - gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - lan { - label = "dragino2:red:lan"; - gpios = <&gpio 13 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - wan { - label = "dragino2:red:wan"; - gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - system { - label = "dragino2:red:system"; - gpios = <&gpio 28 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - button@0 { - label = "jumpstart"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - }; - - button@1 { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 12 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&ref { - clock-frequency = <25000000>; -}; - -&uart { - status = "okay"; -}; - -&gpio { - status = "okay"; -}; - -&usb { - dr_mode = "host"; - status = "okay"; -}; - -&usb_phy { - status = "okay"; -}; - -&spi { - num-chipselects = <1>; - status = "okay"; - - /* Winbond 25Q128BVFG SPI flash */ - spiflash: w25q128@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "winbond,w25q128", "jedec,spi-nor"; - spi-max-frequency = <104000000>; - reg = <0>; - }; -}; diff --git a/target/linux/ath79/dts/ar9331_ew_dorin.dts b/target/linux/ath79/dts/ar9331_ew_dorin.dts deleted file mode 100644 index fd18593..0000000 --- a/target/linux/ath79/dts/ar9331_ew_dorin.dts +++ /dev/null @@ -1,130 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "ar9331.dtsi" - -/ { - model = "Embedded Wireless Dorin"; - compatible = "embeddedwireless,dorin"; - - aliases { - serial0 = &uart; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - leds { - compatible = "gpio-leds"; - - status { - label = "dorin:green:status"; - gpios = <&gpio 21 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - wps { - label = "wps"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - }; - - reset { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 6 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&uart { - status = "okay"; -}; - -&gpio { - status = "okay"; -}; - -&usb { - dr_mode = "host"; - status = "okay"; -}; - -&usb_phy { - status = "okay"; -}; - -&spi { - num-chipselects = <1>; - status = "okay"; - - spiflash { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <104000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x040000>; - read-only; - }; - - partition@1 { - label = "u-boot-env"; - reg = <0x040000 0x010000>; - }; - - partition@2 { - label = "firmware"; - reg = <0x050000 0xfa0000>; - }; - - art: partition@3 { - label = "ART"; - reg = <0xff0000 0x010000>; - read-only; - }; - }; - }; -}; - -ð1 { - status = "okay"; - - mtd-mac-address = <&art 0x1002>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - - gmac-config { - device = <&gmac>; - - switch-phy-addr-swap = <1>; - switch-phy-swap = <1>; - }; -}; - -&mdio1 { - status = "okay"; -}; diff --git a/target/linux/ath79/dts/ar9331_omega.dts b/target/linux/ath79/dts/ar9331_omega.dts deleted file mode 100644 index 1225b24..0000000 --- a/target/linux/ath79/dts/ar9331_omega.dts +++ /dev/null @@ -1,79 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "ar9331.dtsi" - -/ { - model = "Onion Omega"; - compatible = "onion,omega"; - - aliases { - serial0 = &uart; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - leds { - compatible = "gpio-leds"; - - system { - label = "onion:amber:system"; - gpios = <&gpio 27 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - button@0 { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&ref { - clock-frequency = <25000000>; -}; - -&uart { - status = "okay"; -}; - -&gpio { - status = "okay"; -}; - -&usb { - dr_mode = "host"; - status = "okay"; -}; - -&usb_phy { - status = "okay"; -}; - -&spi { - num-chipselects = <1>; - status = "okay"; - - /* Winbond 25Q128FVSG SPI flash */ - spiflash: w25q128@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "winbond,w25q128", "jedec,spi-nor"; - spi-max-frequency = <104000000>; - reg = <0>; - }; -}; diff --git a/target/linux/ath79/dts/ar9331_tl_mr3020.dts b/target/linux/ath79/dts/ar9331_tl_mr3020.dts deleted file mode 100644 index 7439768..0000000 --- a/target/linux/ath79/dts/ar9331_tl_mr3020.dts +++ /dev/null @@ -1,119 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "ar9331.dtsi" - -/ { - model = "TP-Link TL-MR3020"; - compatible = "tplink,tl-mr3020"; - - aliases { - serial0 = &uart; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x2000000>; - }; - - leds { - compatible = "gpio-leds"; - - wlan { - label = "tp-link:green:wlan"; - gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - lan { - label = "tp-link:green:lan"; - gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - wps { - label = "tp-link:green:wps"; - gpios = <&gpio 26 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - led3g { - label = "tp-link:green:3g"; - gpios = <&gpio 27 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - button@0 { - label = "wps"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; - }; - - button@1 { - label = "sw1"; - linux,code = <BTN_0>; - gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; - }; - - button@2 { - label = "sw2"; - linux,code = <BTN_1>; - gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; - }; - }; - - reg_usb_vbus: reg_usb_vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&ref { - clock-frequency = <25000000>; -}; - -&uart { - status = "okay"; -}; - -&gpio { - status = "okay"; -}; - -&usb { - dr_mode = "host"; - vbus-supply = <®_usb_vbus>; - status = "okay"; -}; - -&usb_phy { - status = "okay"; -}; - -&spi { - num-chipselects = <1>; - status = "okay"; - - /* Spansion S25FL032PIF SPI flash */ - spiflash: s25sl032p@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spansion,s25sl032p", "jedec,spi-nor"; - spi-max-frequency = <104000000>; - reg = <0>; - }; -}; diff --git a/target/linux/ath79/dts/ath79.dtsi b/target/linux/ath79/dts/ath79.dtsi deleted file mode 100644 index baf3482..0000000 --- a/target/linux/ath79/dts/ath79.dtsi +++ /dev/null @@ -1,81 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/ { - #address-cells = <1>; - #size-cells = <1>; - - cpuintc: interrupt-controller { - compatible = "qca,ar7100-cpu-intc"; - - interrupt-controller; - #interrupt-cells = <1>; - }; - - ahb { - compatible = "simple-bus"; - ranges; - - #address-cells = <1>; - #size-cells = <1>; - - interrupt-parent = <&cpuintc>; - - apb { - compatible = "simple-bus"; - ranges; - - #address-cells = <1>; - #size-cells = <1>; - - interrupt-parent = <&miscintc>; - - miscintc: interrupt-controller@18060010 { - compatible = "qca,ar7240-misc-intc"; - reg = <0x18060010 0x4>; - - interrupt-parent = <&cpuintc>; - interrupts = <6>; - - interrupt-controller; - #interrupt-cells = <1>; - }; - }; - - eth0: eth@19000000 { - status = "disabled"; - - compatible = "qca,ath79-eth", "syscon"; - reg = <0x19000000 0x200>; - - interrupts = <4>; - phy-mode = "mii"; - - mdio0: mdio-bus { - status = "disabled"; - - regmap = <ð0>; - - clocks = <&pll ATH79_CLK_MDIO>; - clock-names = "ref"; - }; - }; - - eth1: eth@1a000000 { - status = "disabled"; - - compatible = "qca,ath79-eth", "syscon"; - reg = <0x1a000000 0x200>; - - interrupts = <5>; - phy-mode = "mii"; - - mdio1: mdio-bus { - status = "disabled"; - - regmap = <ð1>; - - clocks = <&pll ATH79_CLK_MDIO>; - clock-names = "ref"; - }; - }; - }; -}; diff --git a/target/linux/ath79/dts/qca9557.dtsi b/target/linux/ath79/dts/qca9557.dtsi deleted file mode 100644 index 6058552..0000000 --- a/target/linux/ath79/dts/qca9557.dtsi +++ /dev/null @@ -1,201 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include <dt-bindings/clock/ath79-clk.h> -#include "ath79.dtsi" - -/ { - compatible = "qca,qca9557"; - - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "mips,mips24Kc"; - clocks = <&pll ATH79_CLK_CPU>; - reg = <0>; - }; - }; - - ahb { - apb { - ddr_ctrl: memory-controller@18000000 { - compatible = "qca,ar9557-ddr-controller", - "qca,ar7240-ddr-controller"; - reg = <0x18000000 0x100>; - - #qca,ddr-wb-channel-cells = <1>; - }; - - uart: uart@18020000 { - compatible = "ns16550a"; - reg = <0x18020000 0x20>; - - interrupts = <3>; - - clocks = <&pll ATH79_CLK_REF>; - clock-names = "uart"; - - reg-io-width = <4>; - reg-shift = <2>; - no-loopback-test; - - status = "disabled"; - }; - - gpio: gpio@18040000 { - compatible = "qca,ar9557-gpio", - "qca,ar9340-gpio"; - reg = <0x18040000 0x28>; - - interrupts = <2>; - ngpios = <24>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - pinmux: pinmux@1804002c { - compatible = "pinctrl-single"; - - reg = <0x1804002c 0x40>; - - #size-cells = <0>; - - pinctrl-single,bit-per-mux; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x1>; - #pinctrl-cells = <2>; - - jtag_disable_pins: pinmux_jtag_disable_pins { - pinctrl-single,bits = <0x40 0x2 0x2>; - }; - }; - - pll: pll-controller@18050000 { - compatible = "qca,ar9557-pll", - "qca,qca9550-pll"; - reg = <0x18050000 0x20>; - - #clock-cells = <1>; - clock-output-names = "cpu", "ddr", "ahb"; - }; - - wdt: wdt@18060008 { - compatible = "qca,ar7130-wdt"; - reg = <0x18060008 0x8>; - - interrupts = <4>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "wdt"; - }; - - rst: reset-controller@1806001c { - compatible = "qca,ar9557-reset", - "qca,ar7100-reset", - "simple-bus"; - reg = <0x1806001c 0x4>; - - #reset-cells = <1>; - interrupt-parent = <&cpuintc>; - - intc2: interrupt-controller@2 { - compatible = "qcom,qca9556-intc"; - - interrupts = <2>; - - interrupt-controller; - #interrupt-cells = <1>; - - qcom,pending-bits = <0x1f0>, /* pcie rc1 */ - <0xf>; /* wmac */ - }; - - intc3: interrupt-controller@3 { - compatible = "qcom,qca9556-intc"; - - interrupts = <3>; - - interrupt-controller; - #interrupt-cells = <1>; - - qcom,pending-bits = <0x1f000>, /* pcie rc2 */ - <0x1000000>, /* usb1 */ - <0x10000000>; /* usb2 */ - }; - }; - - pcie0: pcie-controller@180c0000 { - compatible = "qcom,ar7240-pci"; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x0 0x0>; - reg = <0x180c0000 0x1000>, /* CRP */ - <0x180f0000 0x100>, /* CTRL */ - <0x14000000 0x1000>; /* CFG */ - reg-names = "crp_base", "ctrl_base", "cfg_base"; - ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */ - 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */ - interrupt-parent = <&intc2>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - - interrupt-map-mask = <0 0 0 1>; - interrupt-map = <0 0 0 0 &pcie0 0>; - status = "disabled"; - }; - }; - - spi: spi@1f000000 { - compatible = "qca,ar9557-spi", "qca,ar7100-spi"; - reg = <0x1f000000 0x10>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "ahb"; - - status = "disabled"; - - #address-cells = <1>; - #size-cells = <0>; - }; - }; -}; - -&mdio0 { - resets = <&rst 22>; - reset-names = "mdio"; -}; - -ð0 { - compatible = "qca,qca9550-eth", "syscon"; - - pll-data = <0x82000101 0x80000101 0x80001313>; - phy-mode = "rgmii"; - - resets = <&rst 9>; - reset-names = "mac"; -}; - -&mdio1 { - resets = <&rst 23>; - reset-names = "mdio"; -}; - -ð1 { - compatible = "qca,qca9550-eth", "syscon"; - - pll-data = <0x82000101 0x80000101 0x80001313>; - phy-mode = "sgmii"; - - resets = <&rst 13>; - reset-names = "mac"; -}; diff --git a/target/linux/ath79/dts/qca9558_om5p_ac.dts b/target/linux/ath79/dts/qca9558_om5p_ac.dts deleted file mode 100644 index 974b1c6..0000000 --- a/target/linux/ath79/dts/qca9558_om5p_ac.dts +++ /dev/null @@ -1,176 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "qca9557.dtsi" - -/ { - compatible = "openmesh,om5p-ac-v2", "qca,qca9557"; - model = "OpenMesh OM5P-AC V2"; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - extosc: ref { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-output-names = "ref"; - clock-frequency = <40000000>; - }; - - leds { - compatible = "gpio-leds"; - - power { - label = "om5pac:blue:power"; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - wifi_green { - label = "om5pac:green:wifi"; - gpios = <&gpio 13 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - wifi_yellow { - label = "om5pac:yellow:wifi"; - gpios = <&gpio 15 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - wifi_red { - label = "om5pac:red:wifi"; - gpios = <&gpio 23 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - button@0 { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-export { - compatible = "gpio-export"; - #size-cells = <0>; - - gpio_pa_dcdc { - gpio-export,name = "om5pac:pa_dcdc"; - gpio-export,output = <1>; - gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; - }; - gpio_pa_high { - gpio-export,name = "om5pac:pa_high"; - gpio-export,output = <1>; - gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&pinmux { - pinmux_pa_dcdc_pins { - pinctrl-single,bits = <0x0 0xff00 0x0>; - }; - - pinmux_pa_high_pins { - pinctrl-single,bits = <0x10 0xff 0x0>; - }; -}; - -&pcie0 { - status = "okay"; -}; - -&uart { - status = "okay"; -}; - -&pll { - clocks = <&extosc>; -}; - -&spi { - status = "okay"; - num-cs = <1>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mx25l12805d"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x040000>; - read-only; - }; - - partition@1 { - label = "u-boot-env"; - reg = <0x040000 0x010000>; - }; - - partition@2 { - label = "firmware"; - reg = <0x850000 0x7a0000>; - }; - - partition@3 { - label = "ART"; - reg = <0xff0000 0x010000>; - read-only; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "rgmii-id"; - }; -}; - -&mdio1 { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - phy-mode = "sgmii"; - }; -}; - -ð0 { - status = "okay"; - - phy-handle = <&phy4>; - phy-mode = "rgmii"; -}; - -ð1 { - status = "okay"; - - phy-handle = <&phy1>; - phy-mode = "sgmii"; -}; diff --git a/target/linux/ath79/files/arch/mips/ath79/pci-ath9k-fixup.c b/target/linux/ath79/files/arch/mips/ath79/pci-ath9k-fixup.c deleted file mode 100644 index 2202351..0000000 --- a/target/linux/ath79/files/arch/mips/ath79/pci-ath9k-fixup.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * Atheros AP94 reference board PCI initialization - * - * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/delay.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -struct ath9k_fixup { - u16 *cal_data; - unsigned slot; -}; - -static int ath9k_num_fixups; -static struct ath9k_fixup ath9k_fixups[2]; - -static void ath9k_pci_fixup(struct pci_dev *dev) -{ - void __iomem *mem; - u16 *cal_data = NULL; - u16 cmd; - u32 bar0; - u32 val; - unsigned i; - - for (i = 0; i < ath9k_num_fixups; i++) { - if (ath9k_fixups[i].cal_data == NULL) - continue; - - if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn)) - continue; - - cal_data = ath9k_fixups[i].cal_data; - break; - } - - if (cal_data == NULL) - return; - - if (*cal_data != 0xa55a) { - pr_err("pci %s: invalid calibration data\n", pci_name(dev)); - return; - } - - pr_info("pci %s: fixup device configuration\n", pci_name(dev)); - - mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000); - if (!mem) { - pr_err("pci %s: ioremap error\n", pci_name(dev)); - return; - } - - pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0); - - switch (ath79_soc) { - case ATH79_SOC_AR7161: - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, - AR71XX_PCI_MEM_BASE); - break; - case ATH79_SOC_AR7240: - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0xffff); - break; - - case ATH79_SOC_AR7241: - case ATH79_SOC_AR7242: - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0x1000ffff); - break; - case ATH79_SOC_AR9344: - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0x1000ffff); - break; - - default: - BUG(); - } - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_write_config_word(dev, PCI_COMMAND, cmd); - - /* set pointer to first reg address */ - cal_data += 3; - while (*cal_data != 0xffff) { - u32 reg; - reg = *cal_data++; - val = *cal_data++; - val |= (*cal_data++) << 16; - - __raw_writel(val, mem + reg); - udelay(100); - } - - pci_read_config_dword(dev, PCI_VENDOR_ID, &val); - dev->vendor = val & 0xffff; - dev->device = (val >> 16) & 0xffff; - - pci_read_config_dword(dev, PCI_CLASS_REVISION, &val); - dev->revision = val & 0xff; - dev->class = val >> 8; /* upper 3 bytes */ - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); - pci_write_config_word(dev, PCI_COMMAND, cmd); - - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0); - - iounmap(mem); -} -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup); - -void __init pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data) -{ - if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups)) - return; - - ath9k_fixups[ath9k_num_fixups].slot = slot; - ath9k_fixups[ath9k_num_fixups].cal_data = cal_data; - ath9k_num_fixups++; -} diff --git a/target/linux/ath79/files/arch/mips/ath79/pci-ath9k-fixup.h b/target/linux/ath79/files/arch/mips/ath79/pci-ath9k-fixup.h deleted file mode 100644 index 5794941..0000000 --- a/target/linux/ath79/files/arch/mips/ath79/pci-ath9k-fixup.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _PCI_ATH9K_FIXUP -#define _PCI_ATH9K_FIXUP - -void pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data) __init; - -#endif /* _PCI_ATH9K_FIXUP */ diff --git a/target/linux/ath79/files/arch/mips/include/asm/fw/myloader/myloader.h b/target/linux/ath79/files/arch/mips/include/asm/fw/myloader/myloader.h deleted file mode 100644 index 8a99d56..0000000 --- a/target/linux/ath79/files/arch/mips/include/asm/fw/myloader/myloader.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Compex's MyLoader specific definitions - * - * Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef _ASM_MIPS_FW_MYLOADER_H -#define _ASM_MIPS_FW_MYLOADER_H - -#include <linux/myloader.h> - -struct myloader_info { - uint32_t vid; - uint32_t did; - uint32_t svid; - uint32_t sdid; - uint8_t macs[MYLO_ETHADDR_COUNT][6]; -}; - -#ifdef CONFIG_MYLOADER -extern struct myloader_info *myloader_get_info(void) __init; -#else -static inline struct myloader_info *myloader_get_info(void) -{ - return NULL; -} -#endif /* CONFIG_MYLOADER */ - -#endif /* _ASM_MIPS_FW_MYLOADER_H */ diff --git a/target/linux/ath79/files/drivers/mtd/tplinkpart.c b/target/linux/ath79/files/drivers/mtd/tplinkpart.c deleted file mode 100644 index 1b94163..0000000 --- a/target/linux/ath79/files/drivers/mtd/tplinkpart.c +++ /dev/null @@ -1,235 +0,0 @@ -/* - * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/vmalloc.h> -#include <linux/magic.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/version.h> - -#define TPLINK_NUM_PARTS 5 -#define TPLINK_HEADER_V1 0x01000000 -#define TPLINK_HEADER_V2 0x02000000 -#define MD5SUM_LEN 16 - -#define TPLINK_ART_LEN 0x10000 -#define TPLINK_KERNEL_OFFS 0x20000 -#define TPLINK_64K_KERNEL_OFFS 0x10000 - -struct tplink_fw_header { - uint32_t version; /* header version */ - char vendor_name[24]; - char fw_version[36]; - uint32_t hw_id; /* hardware id */ - uint32_t hw_rev; /* hardware revision */ - uint32_t unk1; - uint8_t md5sum1[MD5SUM_LEN]; - uint32_t unk2; - uint8_t md5sum2[MD5SUM_LEN]; - uint32_t unk3; - uint32_t kernel_la; /* kernel load address */ - uint32_t kernel_ep; /* kernel entry point */ - uint32_t fw_length; /* total length of the firmware */ - uint32_t kernel_ofs; /* kernel data offset */ - uint32_t kernel_len; /* kernel data length */ - uint32_t rootfs_ofs; /* rootfs data offset */ - uint32_t rootfs_len; /* rootfs data length */ - uint32_t boot_ofs; /* bootloader data offset */ - uint32_t boot_len; /* bootloader data length */ - uint8_t pad[360]; -} __attribute__ ((packed)); - -static struct tplink_fw_header * -tplink_read_header(struct mtd_info *mtd, size_t offset) -{ - struct tplink_fw_header *header; - size_t header_len; - size_t retlen; - int ret; - u32 t; - - header = vmalloc(sizeof(*header)); - if (!header) - goto err; - - header_len = sizeof(struct tplink_fw_header); - ret = mtd_read(mtd, offset, header_len, &retlen, - (unsigned char *) header); - if (ret) - goto err_free_header; - - if (retlen != header_len) - goto err_free_header; - - /* sanity checks */ - t = be32_to_cpu(header->version); - if ((t != TPLINK_HEADER_V1) && (t != TPLINK_HEADER_V2)) - goto err_free_header; - - t = be32_to_cpu(header->kernel_ofs); - if (t != header_len) - goto err_free_header; - - return header; - -err_free_header: - vfree(header); -err: - return NULL; -} - -static int tplink_check_rootfs_magic(struct mtd_info *mtd, size_t offset) -{ - u32 magic; - size_t retlen; - int ret; - - ret = mtd_read(mtd, offset, sizeof(magic), &retlen, - (unsigned char *) &magic); - if (ret) - return ret; - - if (retlen != sizeof(magic)) - return -EIO; - - if (le32_to_cpu(magic) != SQUASHFS_MAGIC && - magic != 0x19852003) - return -EINVAL; - - return 0; -} - -static int tplink_parse_partitions_offset(struct mtd_info *master, -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) - struct mtd_partition **pparts, -#else - const struct mtd_partition **pparts, -#endif - struct mtd_part_parser_data *data, - size_t offset) -{ - struct mtd_partition *parts; - struct tplink_fw_header *header; - int nr_parts; - size_t art_offset; - size_t rootfs_offset; - size_t squashfs_offset; - int ret; - - nr_parts = TPLINK_NUM_PARTS; - parts = kzalloc(nr_parts * sizeof(struct mtd_partition), GFP_KERNEL); - if (!parts) { - ret = -ENOMEM; - goto err; - } - - header = tplink_read_header(master, offset); - if (!header) { - pr_notice("%s: no TP-Link header found\n", master->name); - ret = -ENODEV; - goto err_free_parts; - } - - squashfs_offset = offset + sizeof(struct tplink_fw_header) + - be32_to_cpu(header->kernel_len); - - ret = tplink_check_rootfs_magic(master, squashfs_offset); - if (ret == 0) - rootfs_offset = squashfs_offset; - else - rootfs_offset = offset + be32_to_cpu(header->rootfs_ofs); - - art_offset = master->size - TPLINK_ART_LEN; - - parts[0].name = "u-boot"; - parts[0].offset = 0; - parts[0].size = offset; - parts[0].mask_flags = MTD_WRITEABLE; - - parts[1].name = "kernel"; - parts[1].offset = offset; - parts[1].size = rootfs_offset - offset; - - parts[2].name = "rootfs"; - parts[2].offset = rootfs_offset; - parts[2].size = art_offset - rootfs_offset; - - parts[3].name = "art"; - parts[3].offset = art_offset; - parts[3].size = TPLINK_ART_LEN; - parts[3].mask_flags = MTD_WRITEABLE; - - parts[4].name = "firmware"; - parts[4].offset = offset; - parts[4].size = art_offset - offset; - - vfree(header); - - *pparts = parts; - return nr_parts; - -err_free_parts: - kfree(parts); -err: - *pparts = NULL; - return ret; -} - -static int tplink_parse_partitions(struct mtd_info *master, -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) - struct mtd_partition **pparts, -#else - const struct mtd_partition **pparts, -#endif - struct mtd_part_parser_data *data) -{ - return tplink_parse_partitions_offset(master, pparts, data, - TPLINK_KERNEL_OFFS); -} - -static int tplink_parse_64k_partitions(struct mtd_info *master, -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) - struct mtd_partition **pparts, -#else - const struct mtd_partition **pparts, -#endif - struct mtd_part_parser_data *data) -{ - return tplink_parse_partitions_offset(master, pparts, data, - TPLINK_64K_KERNEL_OFFS); -} - -static struct mtd_part_parser tplink_parser = { - .owner = THIS_MODULE, - .parse_fn = tplink_parse_partitions, - .name = "tp-link", -}; - -static struct mtd_part_parser tplink_64k_parser = { - .owner = THIS_MODULE, - .parse_fn = tplink_parse_64k_partitions, - .name = "tp-link-64k", -}; - -static int __init tplink_parser_init(void) -{ - register_mtd_parser(&tplink_parser); - register_mtd_parser(&tplink_64k_parser); - - return 0; -} - -module_init(tplink_parser_init); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); diff --git a/target/linux/ath79/files/drivers/net/dsa/mv88e6063.c b/target/linux/ath79/files/drivers/net/dsa/mv88e6063.c deleted file mode 100644 index 5b6da71..0000000 --- a/target/linux/ath79/files/drivers/net/dsa/mv88e6063.c +++ /dev/null @@ -1,289 +0,0 @@ -/* - * net/dsa/mv88e6063.c - Driver for Marvell 88e6063 switch chips - * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org> - * - * This driver was base on: net/dsa/mv88e6060.c - * net/dsa/mv88e6063.c - Driver for Marvell 88e6060 switch chips - * Copyright (c) 2008-2009 Marvell Semiconductor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/version.h> -#include <linux/list.h> -#include <linux/netdevice.h> -#include <linux/phy.h> -#include <net/dsa.h> -#include <linux/version.h> - -#define REG_BASE 0x10 -#define REG_PHY(p) (REG_BASE + (p)) -#define REG_PORT(p) (REG_BASE + 8 + (p)) -#define REG_GLOBAL (REG_BASE + 0x0f) -#define NUM_PORTS 7 - -static int reg_read(struct dsa_switch *ds, int addr, int reg) -{ -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) - struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev); - return mdiobus_read(bus, addr, reg); -#else - struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->dev); - return mdiobus_read(bus, addr, reg); -#endif -} - -#define REG_READ(addr, reg) \ - ({ \ - int __ret; \ - \ - __ret = reg_read(ds, addr, reg); \ - if (__ret < 0) \ - return __ret; \ - __ret; \ - }) - - -static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val) -{ -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) - struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev); - return mdiobus_write(bus, addr, reg, val); -#else - struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->dev); - return mdiobus_write(bus, addr, reg, val); -#endif -} - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,8,0) -static enum dsa_tag_protocol mv88e6063_get_tag_protocol(struct dsa_switch *ds) -{ - return DSA_TAG_PROTO_TRAILER; -} -#endif - -#define REG_WRITE(addr, reg, val) \ - ({ \ - int __ret; \ - \ - __ret = reg_write(ds, addr, reg, val); \ - if (__ret < 0) \ - return __ret; \ - }) - -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) -static char *mv88e6063_drv_probe(struct device *host_dev, int sw_addr) -#else -static const char *mv88e6063_drv_probe(struct device *dsa_dev, - struct device *host_dev, int sw_addr, - void **_priv) -#endif -{ - struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev); - int ret; - - if (!bus) - return NULL; - - ret = mdiobus_read(bus, REG_PORT(0), 0x03); - if (ret >= 0) { - ret &= 0xfff0; - if (ret == 0x1530) - return "Marvell 88E6063"; - } - - return NULL; -} - -static int mv88e6063_switch_reset(struct dsa_switch *ds) -{ - int i; - int ret; - - /* - * Set all ports to the disabled state. - */ - for (i = 0; i < NUM_PORTS; i++) { - ret = REG_READ(REG_PORT(i), 0x04); - REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc); - } - - /* - * Wait for transmit queues to drain. - */ - msleep(2); - - /* - * Reset the switch. - */ - REG_WRITE(REG_GLOBAL, 0x0a, 0xa130); - - /* - * Wait up to one second for reset to complete. - */ - for (i = 0; i < 1000; i++) { - ret = REG_READ(REG_GLOBAL, 0x00); - if ((ret & 0x8000) == 0x0000) - break; - - msleep(1); - } - if (i == 1000) - return -ETIMEDOUT; - - return 0; -} - -static int mv88e6063_setup_global(struct dsa_switch *ds) -{ - /* - * Disable discarding of frames with excessive collisions, - * set the maximum frame size to 1536 bytes, and mask all - * interrupt sources. - */ - REG_WRITE(REG_GLOBAL, 0x04, 0x0800); - - /* - * Enable automatic address learning, set the address - * database size to 1024 entries, and set the default aging - * time to 5 minutes. - */ - REG_WRITE(REG_GLOBAL, 0x0a, 0x2130); - - return 0; -} - -static int mv88e6063_setup_port(struct dsa_switch *ds, int p) -{ - int addr = REG_PORT(p); - - /* - * Do not force flow control, disable Ingress and Egress - * Header tagging, disable VLAN tunneling, and set the port - * state to Forwarding. Additionally, if this is the CPU - * port, enable Ingress and Egress Trailer tagging mode. - */ - REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ? 0x4103 : 0x0003); - - /* - * Port based VLAN map: give each port its own address - * database, allow the CPU port to talk to each of the 'real' - * ports, and allow each of the 'real' ports to only talk to - * the CPU port. - */ - REG_WRITE(addr, 0x06, - ((p & 0xf) << 12) | - (dsa_is_cpu_port(ds, p) ? -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) - ds->phys_port_mask : -#else - ds->enabled_port_mask : -#endif - (1 << ds->dst->cpu_port))); - - /* - * Port Association Vector: when learning source addresses - * of packets, add the address to the address database using - * a port bitmap that has only the bit for this port set and - * the other bits clear. - */ - REG_WRITE(addr, 0x0b, 1 << p); - - return 0; -} - -static int mv88e6063_setup(struct dsa_switch *ds) -{ - int i; - int ret; - - ret = mv88e6063_switch_reset(ds); - if (ret < 0) - return ret; - - /* @@@ initialise atu */ - - ret = mv88e6063_setup_global(ds); - if (ret < 0) - return ret; - - for (i = 0; i < NUM_PORTS; i++) { - ret = mv88e6063_setup_port(ds, i); - if (ret < 0) - return ret; - } - - return 0; -} - -static int mv88e6063_set_addr(struct dsa_switch *ds, u8 *addr) -{ - REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]); - REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]); - REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]); - - return 0; -} - -static int mv88e6063_port_to_phy_addr(int port) -{ - if (port >= 0 && port <= NUM_PORTS) - return REG_PHY(port); - return -1; -} - -static int mv88e6063_phy_read(struct dsa_switch *ds, int port, int regnum) -{ - int addr; - - addr = mv88e6063_port_to_phy_addr(port); - if (addr == -1) - return 0xffff; - - return reg_read(ds, addr, regnum); -} - -static int -mv88e6063_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val) -{ - int addr; - - addr = mv88e6063_port_to_phy_addr(port); - if (addr == -1) - return 0xffff; - - return reg_write(ds, addr, regnum, val); -} - -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,9,0) -static struct dsa_switch_driver mv88e6063_switch_ops = { -#else -static struct dsa_switch_ops mv88e6063_switch_ops = { -#endif -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,8,0) - .tag_protocol = htons(ETH_P_TRAILER), -#else - .get_tag_protocol = mv88e6063_get_tag_protocol, -#endif - .probe = mv88e6063_drv_probe, - .setup = mv88e6063_setup, - .set_addr = mv88e6063_set_addr, - .phy_read = mv88e6063_phy_read, - .phy_write = mv88e6063_phy_write, -}; - -static int __init mv88e6063_init(void) -{ - register_switch_driver(&mv88e6063_switch_ops); - return 0; -} -module_init(mv88e6063_init); - -static void __exit mv88e6063_cleanup(void) -{ - unregister_switch_driver(&mv88e6063_switch_ops); -} -module_exit(mv88e6063_cleanup); diff --git a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/Kconfig b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/Kconfig deleted file mode 100644 index 4df2d21..0000000 --- a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/Kconfig +++ /dev/null @@ -1,25 +0,0 @@ -config AG71XX - tristate "Atheros AR7XXX/AR9XXX built-in ethernet mac support" - depends on ATH79 - select PHYLIB - help - If you wish to compile a kernel for AR7XXX/91XXX and enable - ethernet support, then you should always answer Y to this. - -if AG71XX - -config AG71XX_DEBUG - bool "Atheros AR71xx built-in ethernet driver debugging" - default n - help - Atheros AR71xx built-in ethernet driver debugging messages. - -config AG71XX_DEBUG_FS - bool "Atheros AR71xx built-in ethernet driver debugfs support" - depends on DEBUG_FS - default n - help - Say Y, if you need access to various statistics provided by - the ag71xx driver. - -endif diff --git a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/Makefile b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/Makefile deleted file mode 100644 index 7f396ad..0000000 --- a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# -# Makefile for the Atheros AR71xx built-in ethernet macs -# - -ag71xx-y += ag71xx_main.o -ag71xx-y += ag71xx_ethtool.o -ag71xx-y += ag71xx_phy.o -ag71xx-y += ag71xx_mdio.o -ag71xx-y += ag71xx_ar7240.o - -ag71xx-$(CONFIG_AG71XX_DEBUG_FS) += ag71xx_debugfs.o - -obj-$(CONFIG_AG71XX) += ag71xx.o - diff --git a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx.h b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx.h deleted file mode 100644 index 22b2252..0000000 --- a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx.h +++ /dev/null @@ -1,453 +0,0 @@ -/* - * Atheros AR71xx built-in ethernet mac driver - * - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Based on Atheros' AG7100 driver - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef __AG71XX_H -#define __AG71XX_H - -#include <linux/kernel.h> -#include <linux/version.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/random.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/ethtool.h> -#include <linux/etherdevice.h> -#include <linux/if_vlan.h> -#include <linux/phy.h> -#include <linux/skbuff.h> -#include <linux/dma-mapping.h> -#include <linux/workqueue.h> -#include <linux/reset.h> -#include <linux/of.h> -#include <linux/mfd/syscon.h> -#include <linux/regmap.h> - -#include <linux/bitops.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#define AG71XX_DRV_NAME "ag71xx" - -/* - * For our NAPI weight bigger does *NOT* mean better - it means more - * D-cache misses and lots more wasted cycles than we'll ever - * possibly gain from saving instructions. - */ -#define AG71XX_NAPI_WEIGHT 32 -#define AG71XX_OOM_REFILL (1 + HZ/10) - -#define AG71XX_INT_ERR (AG71XX_INT_RX_BE | AG71XX_INT_TX_BE) -#define AG71XX_INT_TX (AG71XX_INT_TX_PS) -#define AG71XX_INT_RX (AG71XX_INT_RX_PR | AG71XX_INT_RX_OF) - -#define AG71XX_INT_POLL (AG71XX_INT_RX | AG71XX_INT_TX) -#define AG71XX_INT_INIT (AG71XX_INT_ERR | AG71XX_INT_POLL) - -#define AG71XX_TX_MTU_LEN 1540 - -#define AG71XX_TX_RING_SPLIT 512 -#define AG71XX_TX_RING_DS_PER_PKT DIV_ROUND_UP(AG71XX_TX_MTU_LEN, \ - AG71XX_TX_RING_SPLIT) -#define AG71XX_TX_RING_SIZE_DEFAULT 128 -#define AG71XX_RX_RING_SIZE_DEFAULT 256 - -#define AG71XX_TX_RING_SIZE_MAX 128 -#define AG71XX_RX_RING_SIZE_MAX 256 - -#ifdef CONFIG_AG71XX_DEBUG -#define DBG(fmt, args...) pr_debug(fmt, ## args) -#else -#define DBG(fmt, args...) do {} while (0) -#endif - -#define ag71xx_assert(_cond) \ -do { \ - if (_cond) \ - break; \ - printk("%s,%d: assertion failed\n", __FILE__, __LINE__); \ - BUG(); \ -} while (0) - -struct ag71xx_desc { - u32 data; - u32 ctrl; -#define DESC_EMPTY BIT(31) -#define DESC_MORE BIT(24) -#define DESC_PKTLEN_M 0xfff - u32 next; - u32 pad; -} __attribute__((aligned(4))); - -#define AG71XX_DESC_SIZE roundup(sizeof(struct ag71xx_desc), \ - L1_CACHE_BYTES) - -struct ag71xx_buf { - union { - struct sk_buff *skb; - void *rx_buf; - }; - union { - dma_addr_t dma_addr; - unsigned int len; - }; -}; - -struct ag71xx_ring { - struct ag71xx_buf *buf; - u8 *descs_cpu; - dma_addr_t descs_dma; - u16 desc_split; - u16 order; - unsigned int curr; - unsigned int dirty; -}; - -struct ag71xx_int_stats { - unsigned long rx_pr; - unsigned long rx_be; - unsigned long rx_of; - unsigned long tx_ps; - unsigned long tx_be; - unsigned long tx_ur; - unsigned long total; -}; - -struct ag71xx_napi_stats { - unsigned long napi_calls; - unsigned long rx_count; - unsigned long rx_packets; - unsigned long rx_packets_max; - unsigned long tx_count; - unsigned long tx_packets; - unsigned long tx_packets_max; - - unsigned long rx[AG71XX_NAPI_WEIGHT + 1]; - unsigned long tx[AG71XX_NAPI_WEIGHT + 1]; -}; - -struct ag71xx_debug { - struct dentry *debugfs_dir; - - struct ag71xx_int_stats int_stats; - struct ag71xx_napi_stats napi_stats; -}; - -struct ag71xx { - /* - * Critical data related to the per-packet data path are clustered - * early in this structure to help improve the D-cache footprint. - */ - struct ag71xx_ring rx_ring ____cacheline_aligned; - struct ag71xx_ring tx_ring ____cacheline_aligned; - - u16 desc_pktlen_mask; - u16 rx_buf_size; - u8 rx_buf_offset; - u8 tx_hang_workaround:1; - - struct net_device *dev; - struct platform_device *pdev; - spinlock_t lock; - struct napi_struct napi; - u32 msg_enable; - - /* - * From this point onwards we're not looking at per-packet fields. - */ - void __iomem *mac_base; - void __iomem *mii_base; - struct regmap *mii_regmap; - - struct ag71xx_desc *stop_desc; - dma_addr_t stop_desc_dma; - - struct mii_bus *mii_bus; - struct phy_device *phy_dev; - void *phy_priv; - int phy_if_mode; - - unsigned int link; - unsigned int speed; - int duplex; - - struct delayed_work restart_work; - struct timer_list oom_timer; - - struct reset_control *mac_reset; - struct reset_control *phy_reset; - struct reset_control *mdio_reset; - - u32 fifodata[3]; - u32 plldata[3]; - u32 pllreg[3]; - struct regmap *pllregmap; - -#ifdef CONFIG_AG71XX_DEBUG_FS - struct ag71xx_debug debug; -#endif -}; - -extern struct ethtool_ops ag71xx_ethtool_ops; -void ag71xx_link_adjust(struct ag71xx *ag); - -int ag71xx_phy_connect(struct ag71xx *ag); -void ag71xx_phy_disconnect(struct ag71xx *ag); - -static inline int ag71xx_desc_empty(struct ag71xx_desc *desc) -{ - return (desc->ctrl & DESC_EMPTY) != 0; -} - -static inline struct ag71xx_desc * -ag71xx_ring_desc(struct ag71xx_ring *ring, int idx) -{ - return (struct ag71xx_desc *) &ring->descs_cpu[idx * AG71XX_DESC_SIZE]; -} - -static inline int -ag71xx_ring_size_order(int size) -{ - return fls(size - 1); -} - -/* Register offsets */ -#define AG71XX_REG_MAC_CFG1 0x0000 -#define AG71XX_REG_MAC_CFG2 0x0004 -#define AG71XX_REG_MAC_IPG 0x0008 -#define AG71XX_REG_MAC_HDX 0x000c -#define AG71XX_REG_MAC_MFL 0x0010 -#define AG71XX_REG_MII_CFG 0x0020 -#define AG71XX_REG_MII_CMD 0x0024 -#define AG71XX_REG_MII_ADDR 0x0028 -#define AG71XX_REG_MII_CTRL 0x002c -#define AG71XX_REG_MII_STATUS 0x0030 -#define AG71XX_REG_MII_IND 0x0034 -#define AG71XX_REG_MAC_IFCTL 0x0038 -#define AG71XX_REG_MAC_ADDR1 0x0040 -#define AG71XX_REG_MAC_ADDR2 0x0044 -#define AG71XX_REG_FIFO_CFG0 0x0048 -#define AG71XX_REG_FIFO_CFG1 0x004c -#define AG71XX_REG_FIFO_CFG2 0x0050 -#define AG71XX_REG_FIFO_CFG3 0x0054 -#define AG71XX_REG_FIFO_CFG4 0x0058 -#define AG71XX_REG_FIFO_CFG5 0x005c -#define AG71XX_REG_FIFO_RAM0 0x0060 -#define AG71XX_REG_FIFO_RAM1 0x0064 -#define AG71XX_REG_FIFO_RAM2 0x0068 -#define AG71XX_REG_FIFO_RAM3 0x006c -#define AG71XX_REG_FIFO_RAM4 0x0070 -#define AG71XX_REG_FIFO_RAM5 0x0074 -#define AG71XX_REG_FIFO_RAM6 0x0078 -#define AG71XX_REG_FIFO_RAM7 0x007c - -#define AG71XX_REG_TX_CTRL 0x0180 -#define AG71XX_REG_TX_DESC 0x0184 -#define AG71XX_REG_TX_STATUS 0x0188 -#define AG71XX_REG_RX_CTRL 0x018c -#define AG71XX_REG_RX_DESC 0x0190 -#define AG71XX_REG_RX_STATUS 0x0194 -#define AG71XX_REG_INT_ENABLE 0x0198 -#define AG71XX_REG_INT_STATUS 0x019c - -#define AG71XX_REG_FIFO_DEPTH 0x01a8 -#define AG71XX_REG_RX_SM 0x01b0 -#define AG71XX_REG_TX_SM 0x01b4 - -#define MAC_CFG1_TXE BIT(0) /* Tx Enable */ -#define MAC_CFG1_STX BIT(1) /* Synchronize Tx Enable */ -#define MAC_CFG1_RXE BIT(2) /* Rx Enable */ -#define MAC_CFG1_SRX BIT(3) /* Synchronize Rx Enable */ -#define MAC_CFG1_TFC BIT(4) /* Tx Flow Control Enable */ -#define MAC_CFG1_RFC BIT(5) /* Rx Flow Control Enable */ -#define MAC_CFG1_LB BIT(8) /* Loopback mode */ -#define MAC_CFG1_SR BIT(31) /* Soft Reset */ - -#define MAC_CFG2_FDX BIT(0) -#define MAC_CFG2_CRC_EN BIT(1) -#define MAC_CFG2_PAD_CRC_EN BIT(2) -#define MAC_CFG2_LEN_CHECK BIT(4) -#define MAC_CFG2_HUGE_FRAME_EN BIT(5) -#define MAC_CFG2_IF_1000 BIT(9) -#define MAC_CFG2_IF_10_100 BIT(8) - -#define FIFO_CFG0_WTM BIT(0) /* Watermark Module */ -#define FIFO_CFG0_RXS BIT(1) /* Rx System Module */ -#define FIFO_CFG0_RXF BIT(2) /* Rx Fabric Module */ -#define FIFO_CFG0_TXS BIT(3) /* Tx System Module */ -#define FIFO_CFG0_TXF BIT(4) /* Tx Fabric Module */ -#define FIFO_CFG0_ALL (FIFO_CFG0_WTM | FIFO_CFG0_RXS | FIFO_CFG0_RXF \ - | FIFO_CFG0_TXS | FIFO_CFG0_TXF) - -#define FIFO_CFG0_ENABLE_SHIFT 8 - -#define FIFO_CFG4_DE BIT(0) /* Drop Event */ -#define FIFO_CFG4_DV BIT(1) /* RX_DV Event */ -#define FIFO_CFG4_FC BIT(2) /* False Carrier */ -#define FIFO_CFG4_CE BIT(3) /* Code Error */ -#define FIFO_CFG4_CR BIT(4) /* CRC error */ -#define FIFO_CFG4_LM BIT(5) /* Length Mismatch */ -#define FIFO_CFG4_LO BIT(6) /* Length out of range */ -#define FIFO_CFG4_OK BIT(7) /* Packet is OK */ -#define FIFO_CFG4_MC BIT(8) /* Multicast Packet */ -#define FIFO_CFG4_BC BIT(9) /* Broadcast Packet */ -#define FIFO_CFG4_DR BIT(10) /* Dribble */ -#define FIFO_CFG4_LE BIT(11) /* Long Event */ -#define FIFO_CFG4_CF BIT(12) /* Control Frame */ -#define FIFO_CFG4_PF BIT(13) /* Pause Frame */ -#define FIFO_CFG4_UO BIT(14) /* Unsupported Opcode */ -#define FIFO_CFG4_VT BIT(15) /* VLAN tag detected */ -#define FIFO_CFG4_FT BIT(16) /* Frame Truncated */ -#define FIFO_CFG4_UC BIT(17) /* Unicast Packet */ - -#define FIFO_CFG5_DE BIT(0) /* Drop Event */ -#define FIFO_CFG5_DV BIT(1) /* RX_DV Event */ -#define FIFO_CFG5_FC BIT(2) /* False Carrier */ -#define FIFO_CFG5_CE BIT(3) /* Code Error */ -#define FIFO_CFG5_LM BIT(4) /* Length Mismatch */ -#define FIFO_CFG5_LO BIT(5) /* Length Out of Range */ -#define FIFO_CFG5_OK BIT(6) /* Packet is OK */ -#define FIFO_CFG5_MC BIT(7) /* Multicast Packet */ -#define FIFO_CFG5_BC BIT(8) /* Broadcast Packet */ -#define FIFO_CFG5_DR BIT(9) /* Dribble */ -#define FIFO_CFG5_CF BIT(10) /* Control Frame */ -#define FIFO_CFG5_PF BIT(11) /* Pause Frame */ -#define FIFO_CFG5_UO BIT(12) /* Unsupported Opcode */ -#define FIFO_CFG5_VT BIT(13) /* VLAN tag detected */ -#define FIFO_CFG5_LE BIT(14) /* Long Event */ -#define FIFO_CFG5_FT BIT(15) /* Frame Truncated */ -#define FIFO_CFG5_16 BIT(16) /* unknown */ -#define FIFO_CFG5_17 BIT(17) /* unknown */ -#define FIFO_CFG5_SF BIT(18) /* Short Frame */ -#define FIFO_CFG5_BM BIT(19) /* Byte Mode */ - -#define AG71XX_INT_TX_PS BIT(0) -#define AG71XX_INT_TX_UR BIT(1) -#define AG71XX_INT_TX_BE BIT(3) -#define AG71XX_INT_RX_PR BIT(4) -#define AG71XX_INT_RX_OF BIT(6) -#define AG71XX_INT_RX_BE BIT(7) - -#define MAC_IFCTL_SPEED BIT(16) - -#define MII_CFG_CLK_DIV_4 0 -#define MII_CFG_CLK_DIV_6 2 -#define MII_CFG_CLK_DIV_8 3 -#define MII_CFG_CLK_DIV_10 4 -#define MII_CFG_CLK_DIV_14 5 -#define MII_CFG_CLK_DIV_20 6 -#define MII_CFG_CLK_DIV_28 7 -#define MII_CFG_CLK_DIV_34 8 -#define MII_CFG_CLK_DIV_42 9 -#define MII_CFG_CLK_DIV_50 10 -#define MII_CFG_CLK_DIV_58 11 -#define MII_CFG_CLK_DIV_66 12 -#define MII_CFG_CLK_DIV_74 13 -#define MII_CFG_CLK_DIV_82 14 -#define MII_CFG_CLK_DIV_98 15 -#define MII_CFG_RESET BIT(31) - -#define MII_CMD_WRITE 0x0 -#define MII_CMD_READ 0x1 -#define MII_ADDR_SHIFT 8 -#define MII_IND_BUSY BIT(0) -#define MII_IND_INVALID BIT(2) - -#define TX_CTRL_TXE BIT(0) /* Tx Enable */ - -#define TX_STATUS_PS BIT(0) /* Packet Sent */ -#define TX_STATUS_UR BIT(1) /* Tx Underrun */ -#define TX_STATUS_BE BIT(3) /* Bus Error */ - -#define RX_CTRL_RXE BIT(0) /* Rx Enable */ - -#define RX_STATUS_PR BIT(0) /* Packet Received */ -#define RX_STATUS_OF BIT(2) /* Rx Overflow */ -#define RX_STATUS_BE BIT(3) /* Bus Error */ - -static inline void ag71xx_wr(struct ag71xx *ag, unsigned reg, u32 value) -{ - __raw_writel(value, ag->mac_base + reg); - /* flush write */ - (void) __raw_readl(ag->mac_base + reg); -} - -static inline u32 ag71xx_rr(struct ag71xx *ag, unsigned reg) -{ - return __raw_readl(ag->mac_base + reg); -} - -static inline void ag71xx_sb(struct ag71xx *ag, unsigned reg, u32 mask) -{ - void __iomem *r; - - r = ag->mac_base + reg; - __raw_writel(__raw_readl(r) | mask, r); - /* flush write */ - (void) __raw_readl(r); -} - -static inline void ag71xx_cb(struct ag71xx *ag, unsigned reg, u32 mask) -{ - void __iomem *r; - - r = ag->mac_base + reg; - __raw_writel(__raw_readl(r) & ~mask, r); - /* flush write */ - (void) __raw_readl(r); -} - -static inline void ag71xx_int_enable(struct ag71xx *ag, u32 ints) -{ - ag71xx_sb(ag, AG71XX_REG_INT_ENABLE, ints); -} - -static inline void ag71xx_int_disable(struct ag71xx *ag, u32 ints) -{ - ag71xx_cb(ag, AG71XX_REG_INT_ENABLE, ints); -} - -#ifdef CONFIG_AG71XX_DEBUG_FS -int ag71xx_debugfs_root_init(void); -void ag71xx_debugfs_root_exit(void); -int ag71xx_debugfs_init(struct ag71xx *ag); -void ag71xx_debugfs_exit(struct ag71xx *ag); -void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status); -void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx); -#else -static inline int ag71xx_debugfs_root_init(void) { return 0; } -static inline void ag71xx_debugfs_root_exit(void) {} -static inline int ag71xx_debugfs_init(struct ag71xx *ag) { return 0; } -static inline void ag71xx_debugfs_exit(struct ag71xx *ag) {} -static inline void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, - u32 status) {} -static inline void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, - int rx, int tx) {} -#endif /* CONFIG_AG71XX_DEBUG_FS */ - -int ag71xx_ar7240_init(struct ag71xx *ag, struct device_node *np); -void ag71xx_ar7240_cleanup(struct ag71xx *ag); -void ag71xx_ar7240_start(struct ag71xx *ag); - -int ag71xx_mdio_init(struct ag71xx *ag); -void ag71xx_mdio_cleanup(struct ag71xx *ag); -int ag71xx_mdio_mii_read(struct mii_bus *bus, int addr, int reg); -int ag71xx_mdio_mii_write(struct mii_bus *bus, int addr, int reg, u16 val); - -int ar7240sw_phy_read(struct mii_bus *mii, int addr, int reg); -int ar7240sw_phy_write(struct mii_bus *mii, int addr, int reg, u16 val); - -#endif /* _AG71XX_H */ diff --git a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c deleted file mode 100644 index 52c0f96..0000000 --- a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c +++ /dev/null @@ -1,1340 +0,0 @@ -/* - * Driver for the built-in ethernet switch of the Atheros AR7240 SoC - * Copyright (c) 2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (c) 2010 Felix Fietkau <nbd@nbd.name> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#include <linux/etherdevice.h> -#include <linux/list.h> -#include <linux/netdevice.h> -#include <linux/phy.h> -#include <linux/mii.h> -#include <linux/bitops.h> -#include <linux/switch.h> -#include "ag71xx.h" - -#define BITM(_count) (BIT(_count) - 1) -#define BITS(_shift, _count) (BITM(_count) << _shift) - -#define AR7240_REG_MASK_CTRL 0x00 -#define AR7240_MASK_CTRL_REVISION_M BITM(8) -#define AR7240_MASK_CTRL_VERSION_M BITM(8) -#define AR7240_MASK_CTRL_VERSION_S 8 -#define AR7240_MASK_CTRL_VERSION_AR7240 0x01 -#define AR7240_MASK_CTRL_VERSION_AR934X 0x02 -#define AR7240_MASK_CTRL_SOFT_RESET BIT(31) - -#define AR7240_REG_MAC_ADDR0 0x20 -#define AR7240_REG_MAC_ADDR1 0x24 - -#define AR7240_REG_FLOOD_MASK 0x2c -#define AR7240_FLOOD_MASK_BROAD_TO_CPU BIT(26) - -#define AR7240_REG_GLOBAL_CTRL 0x30 -#define AR7240_GLOBAL_CTRL_MTU_M BITM(11) -#define AR9340_GLOBAL_CTRL_MTU_M BITM(14) - -#define AR7240_REG_VTU 0x0040 -#define AR7240_VTU_OP BITM(3) -#define AR7240_VTU_OP_NOOP 0x0 -#define AR7240_VTU_OP_FLUSH 0x1 -#define AR7240_VTU_OP_LOAD 0x2 -#define AR7240_VTU_OP_PURGE 0x3 -#define AR7240_VTU_OP_REMOVE_PORT 0x4 -#define AR7240_VTU_ACTIVE BIT(3) -#define AR7240_VTU_FULL BIT(4) -#define AR7240_VTU_PORT BITS(8, 4) -#define AR7240_VTU_PORT_S 8 -#define AR7240_VTU_VID BITS(16, 12) -#define AR7240_VTU_VID_S 16 -#define AR7240_VTU_PRIO BITS(28, 3) -#define AR7240_VTU_PRIO_S 28 -#define AR7240_VTU_PRIO_EN BIT(31) - -#define AR7240_REG_VTU_DATA 0x0044 -#define AR7240_VTUDATA_MEMBER BITS(0, 10) -#define AR7240_VTUDATA_VALID BIT(11) - -#define AR7240_REG_ATU 0x50 -#define AR7240_ATU_FLUSH_ALL 0x1 - -#define AR7240_REG_AT_CTRL 0x5c -#define AR7240_AT_CTRL_AGE_TIME BITS(0, 15) -#define AR7240_AT_CTRL_AGE_EN BIT(17) -#define AR7240_AT_CTRL_LEARN_CHANGE BIT(18) -#define AR7240_AT_CTRL_RESERVED BIT(19) -#define AR7240_AT_CTRL_ARP_EN BIT(20) - -#define AR7240_REG_TAG_PRIORITY 0x70 - -#define AR7240_REG_SERVICE_TAG 0x74 -#define AR7240_SERVICE_TAG_M BITM(16) - -#define AR7240_REG_CPU_PORT 0x78 -#define AR7240_MIRROR_PORT_S 4 -#define AR7240_MIRROR_PORT_M BITM(4) -#define AR7240_CPU_PORT_EN BIT(8) - -#define AR7240_REG_MIB_FUNCTION0 0x80 -#define AR7240_MIB_TIMER_M BITM(16) -#define AR7240_MIB_AT_HALF_EN BIT(16) -#define AR7240_MIB_BUSY BIT(17) -#define AR7240_MIB_FUNC_S 24 -#define AR7240_MIB_FUNC_M BITM(3) -#define AR7240_MIB_FUNC_NO_OP 0x0 -#define AR7240_MIB_FUNC_FLUSH 0x1 -#define AR7240_MIB_FUNC_CAPTURE 0x3 - -#define AR7240_REG_MDIO_CTRL 0x98 -#define AR7240_MDIO_CTRL_DATA_M BITM(16) -#define AR7240_MDIO_CTRL_REG_ADDR_S 16 -#define AR7240_MDIO_CTRL_PHY_ADDR_S 21 -#define AR7240_MDIO_CTRL_CMD_WRITE 0 -#define AR7240_MDIO_CTRL_CMD_READ BIT(27) -#define AR7240_MDIO_CTRL_MASTER_EN BIT(30) -#define AR7240_MDIO_CTRL_BUSY BIT(31) - -#define AR7240_REG_PORT_BASE(_port) (0x100 + (_port) * 0x100) - -#define AR7240_REG_PORT_STATUS(_port) (AR7240_REG_PORT_BASE((_port)) + 0x00) -#define AR7240_PORT_STATUS_SPEED_S 0 -#define AR7240_PORT_STATUS_SPEED_M BITM(2) -#define AR7240_PORT_STATUS_SPEED_10 0 -#define AR7240_PORT_STATUS_SPEED_100 1 -#define AR7240_PORT_STATUS_SPEED_1000 2 -#define AR7240_PORT_STATUS_TXMAC BIT(2) -#define AR7240_PORT_STATUS_RXMAC BIT(3) -#define AR7240_PORT_STATUS_TXFLOW BIT(4) -#define AR7240_PORT_STATUS_RXFLOW BIT(5) -#define AR7240_PORT_STATUS_DUPLEX BIT(6) -#define AR7240_PORT_STATUS_LINK_UP BIT(8) -#define AR7240_PORT_STATUS_LINK_AUTO BIT(9) -#define AR7240_PORT_STATUS_LINK_PAUSE BIT(10) - -#define AR7240_REG_PORT_CTRL(_port) (AR7240_REG_PORT_BASE((_port)) + 0x04) -#define AR7240_PORT_CTRL_STATE_M BITM(3) -#define AR7240_PORT_CTRL_STATE_DISABLED 0 -#define AR7240_PORT_CTRL_STATE_BLOCK 1 -#define AR7240_PORT_CTRL_STATE_LISTEN 2 -#define AR7240_PORT_CTRL_STATE_LEARN 3 -#define AR7240_PORT_CTRL_STATE_FORWARD 4 -#define AR7240_PORT_CTRL_LEARN_LOCK BIT(7) -#define AR7240_PORT_CTRL_VLAN_MODE_S 8 -#define AR7240_PORT_CTRL_VLAN_MODE_KEEP 0 -#define AR7240_PORT_CTRL_VLAN_MODE_STRIP 1 -#define AR7240_PORT_CTRL_VLAN_MODE_ADD 2 -#define AR7240_PORT_CTRL_VLAN_MODE_DOUBLE_TAG 3 -#define AR7240_PORT_CTRL_IGMP_SNOOP BIT(10) -#define AR7240_PORT_CTRL_HEADER BIT(11) -#define AR7240_PORT_CTRL_MAC_LOOP BIT(12) -#define AR7240_PORT_CTRL_SINGLE_VLAN BIT(13) -#define AR7240_PORT_CTRL_LEARN BIT(14) -#define AR7240_PORT_CTRL_DOUBLE_TAG BIT(15) -#define AR7240_PORT_CTRL_MIRROR_TX BIT(16) -#define AR7240_PORT_CTRL_MIRROR_RX BIT(17) - -#define AR7240_REG_PORT_VLAN(_port) (AR7240_REG_PORT_BASE((_port)) + 0x08) - -#define AR7240_PORT_VLAN_DEFAULT_ID_S 0 -#define AR7240_PORT_VLAN_DEST_PORTS_S 16 -#define AR7240_PORT_VLAN_MODE_S 30 -#define AR7240_PORT_VLAN_MODE_PORT_ONLY 0 -#define AR7240_PORT_VLAN_MODE_PORT_FALLBACK 1 -#define AR7240_PORT_VLAN_MODE_VLAN_ONLY 2 -#define AR7240_PORT_VLAN_MODE_SECURE 3 - - -#define AR7240_REG_STATS_BASE(_port) (0x20000 + (_port) * 0x100) - -#define AR7240_STATS_RXBROAD 0x00 -#define AR7240_STATS_RXPAUSE 0x04 -#define AR7240_STATS_RXMULTI 0x08 -#define AR7240_STATS_RXFCSERR 0x0c -#define AR7240_STATS_RXALIGNERR 0x10 -#define AR7240_STATS_RXRUNT 0x14 -#define AR7240_STATS_RXFRAGMENT 0x18 -#define AR7240_STATS_RX64BYTE 0x1c -#define AR7240_STATS_RX128BYTE 0x20 -#define AR7240_STATS_RX256BYTE 0x24 -#define AR7240_STATS_RX512BYTE 0x28 -#define AR7240_STATS_RX1024BYTE 0x2c -#define AR7240_STATS_RX1518BYTE 0x30 -#define AR7240_STATS_RXMAXBYTE 0x34 -#define AR7240_STATS_RXTOOLONG 0x38 -#define AR7240_STATS_RXGOODBYTE 0x3c -#define AR7240_STATS_RXBADBYTE 0x44 -#define AR7240_STATS_RXOVERFLOW 0x4c -#define AR7240_STATS_FILTERED 0x50 -#define AR7240_STATS_TXBROAD 0x54 -#define AR7240_STATS_TXPAUSE 0x58 -#define AR7240_STATS_TXMULTI 0x5c -#define AR7240_STATS_TXUNDERRUN 0x60 -#define AR7240_STATS_TX64BYTE 0x64 -#define AR7240_STATS_TX128BYTE 0x68 -#define AR7240_STATS_TX256BYTE 0x6c -#define AR7240_STATS_TX512BYTE 0x70 -#define AR7240_STATS_TX1024BYTE 0x74 -#define AR7240_STATS_TX1518BYTE 0x78 -#define AR7240_STATS_TXMAXBYTE 0x7c -#define AR7240_STATS_TXOVERSIZE 0x80 -#define AR7240_STATS_TXBYTE 0x84 -#define AR7240_STATS_TXCOLLISION 0x8c -#define AR7240_STATS_TXABORTCOL 0x90 -#define AR7240_STATS_TXMULTICOL 0x94 -#define AR7240_STATS_TXSINGLECOL 0x98 -#define AR7240_STATS_TXEXCDEFER 0x9c -#define AR7240_STATS_TXDEFER 0xa0 -#define AR7240_STATS_TXLATECOL 0xa4 - -#define AR7240_PORT_CPU 0 -#define AR7240_NUM_PORTS 6 -#define AR7240_NUM_PHYS 5 - -#define AR7240_PHY_ID1 0x004d -#define AR7240_PHY_ID2 0xd041 - -#define AR934X_PHY_ID1 0x004d -#define AR934X_PHY_ID2 0xd042 - -#define AR7240_MAX_VLANS 16 - -#define AR934X_REG_OPER_MODE0 0x04 -#define AR934X_OPER_MODE0_MAC_GMII_EN BIT(6) -#define AR934X_OPER_MODE0_PHY_MII_EN BIT(10) - -#define AR934X_REG_OPER_MODE1 0x08 -#define AR934X_REG_OPER_MODE1_PHY4_MII_EN BIT(28) - -#define AR934X_REG_FLOOD_MASK 0x2c -#define AR934X_FLOOD_MASK_MC_DP(_p) BIT(16 + (_p)) -#define AR934X_FLOOD_MASK_BC_DP(_p) BIT(25 + (_p)) - -#define AR934X_REG_QM_CTRL 0x3c -#define AR934X_QM_CTRL_ARP_EN BIT(15) - -#define AR934X_REG_AT_CTRL 0x5c -#define AR934X_AT_CTRL_AGE_TIME BITS(0, 15) -#define AR934X_AT_CTRL_AGE_EN BIT(17) -#define AR934X_AT_CTRL_LEARN_CHANGE BIT(18) - -#define AR934X_MIB_ENABLE BIT(30) - -#define AR934X_REG_PORT_BASE(_port) (0x100 + (_port) * 0x100) - -#define AR934X_REG_PORT_VLAN1(_port) (AR934X_REG_PORT_BASE((_port)) + 0x08) -#define AR934X_PORT_VLAN1_DEFAULT_SVID_S 0 -#define AR934X_PORT_VLAN1_FORCE_DEFAULT_VID_EN BIT(12) -#define AR934X_PORT_VLAN1_PORT_TLS_MODE BIT(13) -#define AR934X_PORT_VLAN1_PORT_VLAN_PROP_EN BIT(14) -#define AR934X_PORT_VLAN1_PORT_CLONE_EN BIT(15) -#define AR934X_PORT_VLAN1_DEFAULT_CVID_S 16 -#define AR934X_PORT_VLAN1_FORCE_PORT_VLAN_EN BIT(28) -#define AR934X_PORT_VLAN1_ING_PORT_PRI_S 29 - -#define AR934X_REG_PORT_VLAN2(_port) (AR934X_REG_PORT_BASE((_port)) + 0x0c) -#define AR934X_PORT_VLAN2_PORT_VID_MEM_S 16 -#define AR934X_PORT_VLAN2_8021Q_MODE_S 30 -#define AR934X_PORT_VLAN2_8021Q_MODE_PORT_ONLY 0 -#define AR934X_PORT_VLAN2_8021Q_MODE_PORT_FALLBACK 1 -#define AR934X_PORT_VLAN2_8021Q_MODE_VLAN_ONLY 2 -#define AR934X_PORT_VLAN2_8021Q_MODE_SECURE 3 - -#define sw_to_ar7240(_dev) container_of(_dev, struct ar7240sw, swdev) - -struct ar7240sw_port_stat { - unsigned long rx_broadcast; - unsigned long rx_pause; - unsigned long rx_multicast; - unsigned long rx_fcs_error; - unsigned long rx_align_error; - unsigned long rx_runt; - unsigned long rx_fragments; - unsigned long rx_64byte; - unsigned long rx_128byte; - unsigned long rx_256byte; - unsigned long rx_512byte; - unsigned long rx_1024byte; - unsigned long rx_1518byte; - unsigned long rx_maxbyte; - unsigned long rx_toolong; - unsigned long rx_good_byte; - unsigned long rx_bad_byte; - unsigned long rx_overflow; - unsigned long filtered; - - unsigned long tx_broadcast; - unsigned long tx_pause; - unsigned long tx_multicast; - unsigned long tx_underrun; - unsigned long tx_64byte; - unsigned long tx_128byte; - unsigned long tx_256byte; - unsigned long tx_512byte; - unsigned long tx_1024byte; - unsigned long tx_1518byte; - unsigned long tx_maxbyte; - unsigned long tx_oversize; - unsigned long tx_byte; - unsigned long tx_collision; - unsigned long tx_abortcol; - unsigned long tx_multicol; - unsigned long tx_singlecol; - unsigned long tx_excdefer; - unsigned long tx_defer; - unsigned long tx_xlatecol; -}; - -struct ar7240sw { - struct mii_bus *mii_bus; - struct ag71xx_switch_platform_data *swdata; - struct switch_dev swdev; - int num_ports; - u8 ver; - bool vlan; - u16 vlan_id[AR7240_MAX_VLANS]; - u8 vlan_table[AR7240_MAX_VLANS]; - u8 vlan_tagged; - u16 pvid[AR7240_NUM_PORTS]; - char buf[80]; - - rwlock_t stats_lock; - struct ar7240sw_port_stat port_stats[AR7240_NUM_PORTS]; -}; - -struct ar7240sw_hw_stat { - char string[ETH_GSTRING_LEN]; - int sizeof_stat; - int reg; -}; - -static DEFINE_MUTEX(reg_mutex); - -static inline int sw_is_ar7240(struct ar7240sw *as) -{ - return as->ver == AR7240_MASK_CTRL_VERSION_AR7240; -} - -static inline int sw_is_ar934x(struct ar7240sw *as) -{ - return as->ver == AR7240_MASK_CTRL_VERSION_AR934X; -} - -static inline u32 ar7240sw_port_mask(struct ar7240sw *as, int port) -{ - return BIT(port); -} - -static inline u32 ar7240sw_port_mask_all(struct ar7240sw *as) -{ - return BIT(as->swdev.ports) - 1; -} - -static inline u32 ar7240sw_port_mask_but(struct ar7240sw *as, int port) -{ - return ar7240sw_port_mask_all(as) & ~BIT(port); -} - -static inline u16 mk_phy_addr(u32 reg) -{ - return 0x17 & ((reg >> 4) | 0x10); -} - -static inline u16 mk_phy_reg(u32 reg) -{ - return (reg << 1) & 0x1e; -} - -static inline u16 mk_high_addr(u32 reg) -{ - return (reg >> 7) & 0x1ff; -} - -static u32 __ar7240sw_reg_read(struct mii_bus *mii, u32 reg) -{ - unsigned long flags; - u16 phy_addr; - u16 phy_reg; - u32 hi, lo; - - reg = (reg & 0xfffffffc) >> 2; - phy_addr = mk_phy_addr(reg); - phy_reg = mk_phy_reg(reg); - - local_irq_save(flags); - ag71xx_mdio_mii_write(mii, 0x1f, 0x10, mk_high_addr(reg)); - lo = (u32) ag71xx_mdio_mii_read(mii, phy_addr, phy_reg); - hi = (u32) ag71xx_mdio_mii_read(mii, phy_addr, phy_reg + 1); - local_irq_restore(flags); - - return (hi << 16) | lo; -} - -static void __ar7240sw_reg_write(struct mii_bus *mii, u32 reg, u32 val) -{ - unsigned long flags; - u16 phy_addr; - u16 phy_reg; - - reg = (reg & 0xfffffffc) >> 2; - phy_addr = mk_phy_addr(reg); - phy_reg = mk_phy_reg(reg); - - local_irq_save(flags); - ag71xx_mdio_mii_write(mii, 0x1f, 0x10, mk_high_addr(reg)); - ag71xx_mdio_mii_write(mii, phy_addr, phy_reg + 1, (val >> 16)); - ag71xx_mdio_mii_write(mii, phy_addr, phy_reg, (val & 0xffff)); - local_irq_restore(flags); -} - -static u32 ar7240sw_reg_read(struct mii_bus *mii, u32 reg_addr) -{ - u32 ret; - - mutex_lock(®_mutex); - ret = __ar7240sw_reg_read(mii, reg_addr); - mutex_unlock(®_mutex); - - return ret; -} - -static void ar7240sw_reg_write(struct mii_bus *mii, u32 reg_addr, u32 reg_val) -{ - mutex_lock(®_mutex); - __ar7240sw_reg_write(mii, reg_addr, reg_val); - mutex_unlock(®_mutex); -} - -static u32 ar7240sw_reg_rmw(struct mii_bus *mii, u32 reg, u32 mask, u32 val) -{ - u32 t; - - mutex_lock(®_mutex); - t = __ar7240sw_reg_read(mii, reg); - t &= ~mask; - t |= val; - __ar7240sw_reg_write(mii, reg, t); - mutex_unlock(®_mutex); - - return t; -} - -static void ar7240sw_reg_set(struct mii_bus *mii, u32 reg, u32 val) -{ - u32 t; - - mutex_lock(®_mutex); - t = __ar7240sw_reg_read(mii, reg); - t |= val; - __ar7240sw_reg_write(mii, reg, t); - mutex_unlock(®_mutex); -} - -static int __ar7240sw_reg_wait(struct mii_bus *mii, u32 reg, u32 mask, u32 val, - unsigned timeout) -{ - int i; - - for (i = 0; i < timeout; i++) { - u32 t; - - t = __ar7240sw_reg_read(mii, reg); - if ((t & mask) == val) - return 0; - - usleep_range(1000, 2000); - } - - return -ETIMEDOUT; -} - -static int ar7240sw_reg_wait(struct mii_bus *mii, u32 reg, u32 mask, u32 val, - unsigned timeout) -{ - int ret; - - mutex_lock(®_mutex); - ret = __ar7240sw_reg_wait(mii, reg, mask, val, timeout); - mutex_unlock(®_mutex); - return ret; -} - -int ar7240sw_phy_read(struct mii_bus *mii, int phy_addr, int reg_addr) -{ - u32 t, val = 0xffff; - int err; - - if (phy_addr >= AR7240_NUM_PHYS) - return 0xffff; - - mutex_lock(®_mutex); - t = (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) | - (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) | - AR7240_MDIO_CTRL_MASTER_EN | - AR7240_MDIO_CTRL_BUSY | - AR7240_MDIO_CTRL_CMD_READ; - - __ar7240sw_reg_write(mii, AR7240_REG_MDIO_CTRL, t); - err = __ar7240sw_reg_wait(mii, AR7240_REG_MDIO_CTRL, - AR7240_MDIO_CTRL_BUSY, 0, 5); - if (!err) - val = __ar7240sw_reg_read(mii, AR7240_REG_MDIO_CTRL); - mutex_unlock(®_mutex); - - return val & AR7240_MDIO_CTRL_DATA_M; -} - -int ar7240sw_phy_write(struct mii_bus *mii, int phy_addr, int reg_addr, - u16 reg_val) -{ - u32 t; - int ret; - - if (phy_addr >= AR7240_NUM_PHYS) - return -EINVAL; - - mutex_lock(®_mutex); - t = (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) | - (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) | - AR7240_MDIO_CTRL_MASTER_EN | - AR7240_MDIO_CTRL_BUSY | - AR7240_MDIO_CTRL_CMD_WRITE | - reg_val; - - __ar7240sw_reg_write(mii, AR7240_REG_MDIO_CTRL, t); - ret = __ar7240sw_reg_wait(mii, AR7240_REG_MDIO_CTRL, - AR7240_MDIO_CTRL_BUSY, 0, 5); - mutex_unlock(®_mutex); - - return ret; -} - -static int ar7240sw_capture_stats(struct ar7240sw *as) -{ - struct mii_bus *mii = as->mii_bus; - int port; - int ret; - - write_lock(&as->stats_lock); - - /* Capture the hardware statistics for all ports */ - ar7240sw_reg_rmw(mii, AR7240_REG_MIB_FUNCTION0, - (AR7240_MIB_FUNC_M << AR7240_MIB_FUNC_S), - (AR7240_MIB_FUNC_CAPTURE << AR7240_MIB_FUNC_S)); - - /* Wait for the capturing to complete. */ - ret = ar7240sw_reg_wait(mii, AR7240_REG_MIB_FUNCTION0, - AR7240_MIB_BUSY, 0, 10); - - if (ret) - goto unlock; - - for (port = 0; port < AR7240_NUM_PORTS; port++) { - unsigned int base; - struct ar7240sw_port_stat *stats; - - base = AR7240_REG_STATS_BASE(port); - stats = &as->port_stats[port]; - -#define READ_STAT(_r) ar7240sw_reg_read(mii, base + AR7240_STATS_ ## _r) - - stats->rx_good_byte += READ_STAT(RXGOODBYTE); - stats->tx_byte += READ_STAT(TXBYTE); - -#undef READ_STAT - } - - ret = 0; - -unlock: - write_unlock(&as->stats_lock); - return ret; -} - -static void ar7240sw_disable_port(struct ar7240sw *as, unsigned port) -{ - ar7240sw_reg_write(as->mii_bus, AR7240_REG_PORT_CTRL(port), - AR7240_PORT_CTRL_STATE_DISABLED); -} - -static void ar7240sw_setup(struct ar7240sw *as) -{ - struct mii_bus *mii = as->mii_bus; - - /* Enable CPU port, and disable mirror port */ - ar7240sw_reg_write(mii, AR7240_REG_CPU_PORT, - AR7240_CPU_PORT_EN | - (15 << AR7240_MIRROR_PORT_S)); - - /* Setup TAG priority mapping */ - ar7240sw_reg_write(mii, AR7240_REG_TAG_PRIORITY, 0xfa50); - - if (sw_is_ar934x(as)) { - /* Enable aging, MAC replacing */ - ar7240sw_reg_write(mii, AR934X_REG_AT_CTRL, - 0x2b /* 5 min age time */ | - AR934X_AT_CTRL_AGE_EN | - AR934X_AT_CTRL_LEARN_CHANGE); - /* Enable ARP frame acknowledge */ - ar7240sw_reg_set(mii, AR934X_REG_QM_CTRL, - AR934X_QM_CTRL_ARP_EN); - /* Enable Broadcast/Multicast frames transmitted to the CPU */ - ar7240sw_reg_set(mii, AR934X_REG_FLOOD_MASK, - AR934X_FLOOD_MASK_BC_DP(0) | - AR934X_FLOOD_MASK_MC_DP(0)); - - /* setup MTU */ - ar7240sw_reg_rmw(mii, AR7240_REG_GLOBAL_CTRL, - AR9340_GLOBAL_CTRL_MTU_M, - AR9340_GLOBAL_CTRL_MTU_M); - - /* Enable MIB counters */ - ar7240sw_reg_set(mii, AR7240_REG_MIB_FUNCTION0, - AR934X_MIB_ENABLE); - - } else { - /* Enable ARP frame acknowledge, aging, MAC replacing */ - ar7240sw_reg_write(mii, AR7240_REG_AT_CTRL, - AR7240_AT_CTRL_RESERVED | - 0x2b /* 5 min age time */ | - AR7240_AT_CTRL_AGE_EN | - AR7240_AT_CTRL_ARP_EN | - AR7240_AT_CTRL_LEARN_CHANGE); - /* Enable Broadcast frames transmitted to the CPU */ - ar7240sw_reg_set(mii, AR7240_REG_FLOOD_MASK, - AR7240_FLOOD_MASK_BROAD_TO_CPU); - - /* setup MTU */ - ar7240sw_reg_rmw(mii, AR7240_REG_GLOBAL_CTRL, - AR7240_GLOBAL_CTRL_MTU_M, - AR7240_GLOBAL_CTRL_MTU_M); - } - - /* setup Service TAG */ - ar7240sw_reg_rmw(mii, AR7240_REG_SERVICE_TAG, AR7240_SERVICE_TAG_M, 0); -} - -/* inspired by phy_poll_reset in drivers/net/phy/phy_device.c */ -static int -ar7240sw_phy_poll_reset(struct mii_bus *bus) -{ - const unsigned int sleep_msecs = 20; - int ret, elapsed, i; - - for (elapsed = sleep_msecs; elapsed <= 600; - elapsed += sleep_msecs) { - msleep(sleep_msecs); - for (i = 0; i < AR7240_NUM_PHYS; i++) { - ret = ar7240sw_phy_read(bus, i, MII_BMCR); - if (ret < 0) - return ret; - if (ret & BMCR_RESET) - break; - if (i == AR7240_NUM_PHYS - 1) { - usleep_range(1000, 2000); - return 0; - } - } - } - return -ETIMEDOUT; -} - -static int ar7240sw_reset(struct ar7240sw *as) -{ - struct mii_bus *mii = as->mii_bus; - int ret; - int i; - - /* Set all ports to disabled state. */ - for (i = 0; i < AR7240_NUM_PORTS; i++) - ar7240sw_disable_port(as, i); - - /* Wait for transmit queues to drain. */ - usleep_range(2000, 3000); - - /* Reset the switch. */ - ar7240sw_reg_write(mii, AR7240_REG_MASK_CTRL, - AR7240_MASK_CTRL_SOFT_RESET); - - ret = ar7240sw_reg_wait(mii, AR7240_REG_MASK_CTRL, - AR7240_MASK_CTRL_SOFT_RESET, 0, 1000); - - /* setup PHYs */ - for (i = 0; i < AR7240_NUM_PHYS; i++) { - ar7240sw_phy_write(mii, i, MII_ADVERTISE, - ADVERTISE_ALL | ADVERTISE_PAUSE_CAP | - ADVERTISE_PAUSE_ASYM); - ar7240sw_phy_write(mii, i, MII_BMCR, - BMCR_RESET | BMCR_ANENABLE); - } - ret = ar7240sw_phy_poll_reset(mii); - if (ret) - return ret; - - ar7240sw_setup(as); - return ret; -} - -static void ar7240sw_setup_port(struct ar7240sw *as, unsigned port, u8 portmask) -{ - struct mii_bus *mii = as->mii_bus; - u32 ctrl; - u32 vid, mode; - - ctrl = AR7240_PORT_CTRL_STATE_FORWARD | AR7240_PORT_CTRL_LEARN | - AR7240_PORT_CTRL_SINGLE_VLAN; - - if (port == AR7240_PORT_CPU) { - ar7240sw_reg_write(mii, AR7240_REG_PORT_STATUS(port), - AR7240_PORT_STATUS_SPEED_1000 | - AR7240_PORT_STATUS_TXFLOW | - AR7240_PORT_STATUS_RXFLOW | - AR7240_PORT_STATUS_TXMAC | - AR7240_PORT_STATUS_RXMAC | - AR7240_PORT_STATUS_DUPLEX); - } else { - ar7240sw_reg_write(mii, AR7240_REG_PORT_STATUS(port), - AR7240_PORT_STATUS_LINK_AUTO); - } - - /* Set the default VID for this port */ - if (as->vlan) { - vid = as->vlan_id[as->pvid[port]]; - mode = AR7240_PORT_VLAN_MODE_SECURE; - } else { - vid = port; - mode = AR7240_PORT_VLAN_MODE_PORT_ONLY; - } - - if (as->vlan) { - if (as->vlan_tagged & BIT(port)) - ctrl |= AR7240_PORT_CTRL_VLAN_MODE_ADD << - AR7240_PORT_CTRL_VLAN_MODE_S; - else - ctrl |= AR7240_PORT_CTRL_VLAN_MODE_STRIP << - AR7240_PORT_CTRL_VLAN_MODE_S; - } else { - ctrl |= AR7240_PORT_CTRL_VLAN_MODE_KEEP << - AR7240_PORT_CTRL_VLAN_MODE_S; - } - - if (!portmask) { - if (port == AR7240_PORT_CPU) - portmask = ar7240sw_port_mask_but(as, AR7240_PORT_CPU); - else - portmask = ar7240sw_port_mask(as, AR7240_PORT_CPU); - } - - /* allow the port to talk to all other ports, but exclude its - * own ID to prevent frames from being reflected back to the - * port that they came from */ - portmask &= ar7240sw_port_mask_but(as, port); - - ar7240sw_reg_write(mii, AR7240_REG_PORT_CTRL(port), ctrl); - if (sw_is_ar934x(as)) { - u32 vlan1, vlan2; - - vlan1 = (vid << AR934X_PORT_VLAN1_DEFAULT_CVID_S); - vlan2 = (portmask << AR934X_PORT_VLAN2_PORT_VID_MEM_S) | - (mode << AR934X_PORT_VLAN2_8021Q_MODE_S); - ar7240sw_reg_write(mii, AR934X_REG_PORT_VLAN1(port), vlan1); - ar7240sw_reg_write(mii, AR934X_REG_PORT_VLAN2(port), vlan2); - } else { - u32 vlan; - - vlan = vid | (mode << AR7240_PORT_VLAN_MODE_S) | - (portmask << AR7240_PORT_VLAN_DEST_PORTS_S); - - ar7240sw_reg_write(mii, AR7240_REG_PORT_VLAN(port), vlan); - } -} - -static int ar7240_set_addr(struct ar7240sw *as, u8 *addr) -{ - struct mii_bus *mii = as->mii_bus; - u32 t; - - t = (addr[4] << 8) | addr[5]; - ar7240sw_reg_write(mii, AR7240_REG_MAC_ADDR0, t); - - t = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3]; - ar7240sw_reg_write(mii, AR7240_REG_MAC_ADDR1, t); - - return 0; -} - -static int -ar7240_set_vid(struct switch_dev *dev, const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - as->vlan_id[val->port_vlan] = val->value.i; - return 0; -} - -static int -ar7240_get_vid(struct switch_dev *dev, const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - val->value.i = as->vlan_id[val->port_vlan]; - return 0; -} - -static int -ar7240_set_pvid(struct switch_dev *dev, int port, int vlan) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - - /* make sure no invalid PVIDs get set */ - - if (vlan >= dev->vlans) - return -EINVAL; - - as->pvid[port] = vlan; - return 0; -} - -static int -ar7240_get_pvid(struct switch_dev *dev, int port, int *vlan) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - *vlan = as->pvid[port]; - return 0; -} - -static int -ar7240_get_ports(struct switch_dev *dev, struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - u8 ports = as->vlan_table[val->port_vlan]; - int i; - - val->len = 0; - for (i = 0; i < as->swdev.ports; i++) { - struct switch_port *p; - - if (!(ports & (1 << i))) - continue; - - p = &val->value.ports[val->len++]; - p->id = i; - if (as->vlan_tagged & (1 << i)) - p->flags = (1 << SWITCH_PORT_FLAG_TAGGED); - else - p->flags = 0; - } - return 0; -} - -static int -ar7240_set_ports(struct switch_dev *dev, struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - u8 *vt = &as->vlan_table[val->port_vlan]; - int i, j; - - *vt = 0; - for (i = 0; i < val->len; i++) { - struct switch_port *p = &val->value.ports[i]; - - if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED)) - as->vlan_tagged |= (1 << p->id); - else { - as->vlan_tagged &= ~(1 << p->id); - as->pvid[p->id] = val->port_vlan; - - /* make sure that an untagged port does not - * appear in other vlans */ - for (j = 0; j < AR7240_MAX_VLANS; j++) { - if (j == val->port_vlan) - continue; - as->vlan_table[j] &= ~(1 << p->id); - } - } - - *vt |= 1 << p->id; - } - return 0; -} - -static int -ar7240_set_vlan(struct switch_dev *dev, const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - as->vlan = !!val->value.i; - return 0; -} - -static int -ar7240_get_vlan(struct switch_dev *dev, const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - val->value.i = as->vlan; - return 0; -} - -static void -ar7240_vtu_op(struct ar7240sw *as, u32 op, u32 val) -{ - struct mii_bus *mii = as->mii_bus; - - if (ar7240sw_reg_wait(mii, AR7240_REG_VTU, AR7240_VTU_ACTIVE, 0, 5)) - return; - - if ((op & AR7240_VTU_OP) == AR7240_VTU_OP_LOAD) { - val &= AR7240_VTUDATA_MEMBER; - val |= AR7240_VTUDATA_VALID; - ar7240sw_reg_write(mii, AR7240_REG_VTU_DATA, val); - } - op |= AR7240_VTU_ACTIVE; - ar7240sw_reg_write(mii, AR7240_REG_VTU, op); -} - -static int -ar7240_hw_apply(struct switch_dev *dev) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - u8 portmask[AR7240_NUM_PORTS]; - int i, j; - - /* flush all vlan translation unit entries */ - ar7240_vtu_op(as, AR7240_VTU_OP_FLUSH, 0); - - memset(portmask, 0, sizeof(portmask)); - if (as->vlan) { - /* calculate the port destination masks and load vlans - * into the vlan translation unit */ - for (j = 0; j < AR7240_MAX_VLANS; j++) { - u8 vp = as->vlan_table[j]; - - if (!vp) - continue; - - for (i = 0; i < as->swdev.ports; i++) { - u8 mask = (1 << i); - if (vp & mask) - portmask[i] |= vp & ~mask; - } - - ar7240_vtu_op(as, - AR7240_VTU_OP_LOAD | - (as->vlan_id[j] << AR7240_VTU_VID_S), - as->vlan_table[j]); - } - } else { - /* vlan disabled: - * isolate all ports, but connect them to the cpu port */ - for (i = 0; i < as->swdev.ports; i++) { - if (i == AR7240_PORT_CPU) - continue; - - portmask[i] = 1 << AR7240_PORT_CPU; - portmask[AR7240_PORT_CPU] |= (1 << i); - } - } - - /* update the port destination mask registers and tag settings */ - for (i = 0; i < as->swdev.ports; i++) - ar7240sw_setup_port(as, i, portmask[i]); - - return 0; -} - -static int -ar7240_reset_switch(struct switch_dev *dev) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - ar7240sw_reset(as); - return 0; -} - -static int -ar7240_get_port_link(struct switch_dev *dev, int port, - struct switch_port_link *link) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - struct mii_bus *mii = as->mii_bus; - u32 status; - - if (port >= AR7240_NUM_PORTS) - return -EINVAL; - - status = ar7240sw_reg_read(mii, AR7240_REG_PORT_STATUS(port)); - link->aneg = !!(status & AR7240_PORT_STATUS_LINK_AUTO); - if (link->aneg) { - link->link = !!(status & AR7240_PORT_STATUS_LINK_UP); - if (!link->link) - return 0; - } else { - link->link = true; - } - - link->duplex = !!(status & AR7240_PORT_STATUS_DUPLEX); - link->tx_flow = !!(status & AR7240_PORT_STATUS_TXFLOW); - link->rx_flow = !!(status & AR7240_PORT_STATUS_RXFLOW); - switch (status & AR7240_PORT_STATUS_SPEED_M) { - case AR7240_PORT_STATUS_SPEED_10: - link->speed = SWITCH_PORT_SPEED_10; - break; - case AR7240_PORT_STATUS_SPEED_100: - link->speed = SWITCH_PORT_SPEED_100; - break; - case AR7240_PORT_STATUS_SPEED_1000: - link->speed = SWITCH_PORT_SPEED_1000; - break; - } - - return 0; -} - -static int -ar7240_get_port_stats(struct switch_dev *dev, int port, - struct switch_port_stats *stats) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - - if (port >= AR7240_NUM_PORTS) - return -EINVAL; - - ar7240sw_capture_stats(as); - - read_lock(&as->stats_lock); - stats->rx_bytes = as->port_stats[port].rx_good_byte; - stats->tx_bytes = as->port_stats[port].tx_byte; - read_unlock(&as->stats_lock); - - return 0; -} - -static int -ar7240_set_mirror_monitor_port(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - struct mii_bus *mii = as->mii_bus; - - int port = val->value.i; - - if (port > 15) - return -EINVAL; - - ar7240sw_reg_rmw(mii, AR7240_REG_CPU_PORT, - AR7240_MIRROR_PORT_M << AR7240_MIRROR_PORT_S, - port << AR7240_MIRROR_PORT_S); - - return 0; -} - -static int -ar7240_get_mirror_monitor_port(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - struct mii_bus *mii = as->mii_bus; - - u32 ret; - - ret = ar7240sw_reg_read(mii, AR7240_REG_CPU_PORT); - val->value.i = (ret >> AR7240_MIRROR_PORT_S) & AR7240_MIRROR_PORT_M; - - return 0; -} - -static int -ar7240_set_mirror_rx(struct switch_dev *dev, const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - struct mii_bus *mii = as->mii_bus; - - int port = val->port_vlan; - - if (port >= dev->ports) - return -EINVAL; - - if (val && val->value.i == 1) - ar7240sw_reg_set(mii, AR7240_REG_PORT_CTRL(port), - AR7240_PORT_CTRL_MIRROR_RX); - else - ar7240sw_reg_rmw(mii, AR7240_REG_PORT_CTRL(port), - AR7240_PORT_CTRL_MIRROR_RX, 0); - - return 0; -} - -static int -ar7240_get_mirror_rx(struct switch_dev *dev, const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - struct mii_bus *mii = as->mii_bus; - - u32 ctrl; - - int port = val->port_vlan; - - if (port >= dev->ports) - return -EINVAL; - - ctrl = ar7240sw_reg_read(mii, AR7240_REG_PORT_CTRL(port)); - - if ((ctrl & AR7240_PORT_CTRL_MIRROR_RX) == AR7240_PORT_CTRL_MIRROR_RX) - val->value.i = 1; - else - val->value.i = 0; - - return 0; -} - -static int -ar7240_set_mirror_tx(struct switch_dev *dev, const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - struct mii_bus *mii = as->mii_bus; - - int port = val->port_vlan; - - if (port >= dev->ports) - return -EINVAL; - - if (val && val->value.i == 1) - ar7240sw_reg_set(mii, AR7240_REG_PORT_CTRL(port), - AR7240_PORT_CTRL_MIRROR_TX); - else - ar7240sw_reg_rmw(mii, AR7240_REG_PORT_CTRL(port), - AR7240_PORT_CTRL_MIRROR_TX, 0); - - return 0; -} - -static int -ar7240_get_mirror_tx(struct switch_dev *dev, const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - struct mii_bus *mii = as->mii_bus; - - u32 ctrl; - - int port = val->port_vlan; - - if (port >= dev->ports) - return -EINVAL; - - ctrl = ar7240sw_reg_read(mii, AR7240_REG_PORT_CTRL(port)); - - if ((ctrl & AR7240_PORT_CTRL_MIRROR_TX) == AR7240_PORT_CTRL_MIRROR_TX) - val->value.i = 1; - else - val->value.i = 0; - - return 0; -} - -static struct switch_attr ar7240_globals[] = { - { - .type = SWITCH_TYPE_INT, - .name = "enable_vlan", - .description = "Enable VLAN mode", - .set = ar7240_set_vlan, - .get = ar7240_get_vlan, - .max = 1 - }, - { - .type = SWITCH_TYPE_INT, - .name = "mirror_monitor_port", - .description = "Mirror monitor port", - .set = ar7240_set_mirror_monitor_port, - .get = ar7240_get_mirror_monitor_port, - .max = 15 - }, -}; - -static struct switch_attr ar7240_port[] = { - { - .type = SWITCH_TYPE_INT, - .name = "enable_mirror_rx", - .description = "Enable mirroring of RX packets", - .set = ar7240_set_mirror_rx, - .get = ar7240_get_mirror_rx, - .max = 1 - }, - { - .type = SWITCH_TYPE_INT, - .name = "enable_mirror_tx", - .description = "Enable mirroring of TX packets", - .set = ar7240_set_mirror_tx, - .get = ar7240_get_mirror_tx, - .max = 1 - }, -}; - -static struct switch_attr ar7240_vlan[] = { - { - .type = SWITCH_TYPE_INT, - .name = "vid", - .description = "VLAN ID", - .set = ar7240_set_vid, - .get = ar7240_get_vid, - .max = 4094, - }, -}; - -static const struct switch_dev_ops ar7240_ops = { - .attr_global = { - .attr = ar7240_globals, - .n_attr = ARRAY_SIZE(ar7240_globals), - }, - .attr_port = { - .attr = ar7240_port, - .n_attr = ARRAY_SIZE(ar7240_port), - }, - .attr_vlan = { - .attr = ar7240_vlan, - .n_attr = ARRAY_SIZE(ar7240_vlan), - }, - .get_port_pvid = ar7240_get_pvid, - .set_port_pvid = ar7240_set_pvid, - .get_vlan_ports = ar7240_get_ports, - .set_vlan_ports = ar7240_set_ports, - .apply_config = ar7240_hw_apply, - .reset_switch = ar7240_reset_switch, - .get_port_link = ar7240_get_port_link, - .get_port_stats = ar7240_get_port_stats, -}; - -static struct ar7240sw * -ar7240_probe(struct ag71xx *ag, struct device_node *np) -{ - struct mii_bus *mii = ag->mii_bus; - struct ar7240sw *as; - struct switch_dev *swdev; - u32 ctrl; - u16 phy_id1; - u16 phy_id2; - int i; - - phy_id1 = ar7240sw_phy_read(mii, 0, MII_PHYSID1); - phy_id2 = ar7240sw_phy_read(mii, 0, MII_PHYSID2); - if ((phy_id1 != AR7240_PHY_ID1 || phy_id2 != AR7240_PHY_ID2) && - (phy_id1 != AR934X_PHY_ID1 || phy_id2 != AR934X_PHY_ID2)) { - pr_err("%s: unknown phy id '%04x:%04x'\n", - dev_name(&mii->dev), phy_id1, phy_id2); - return NULL; - } - - as = kzalloc(sizeof(*as), GFP_KERNEL); - if (!as) - return NULL; - - as->mii_bus = mii; - - swdev = &as->swdev; - - ctrl = ar7240sw_reg_read(mii, AR7240_REG_MASK_CTRL); - as->ver = (ctrl >> AR7240_MASK_CTRL_VERSION_S) & - AR7240_MASK_CTRL_VERSION_M; - - if (sw_is_ar7240(as)) { - swdev->name = "AR7240/AR9330 built-in switch"; - swdev->ports = AR7240_NUM_PORTS - 1; - } else if (sw_is_ar934x(as)) { - swdev->name = "AR934X built-in switch"; - - if (ag->phy_if_mode == PHY_INTERFACE_MODE_GMII) { - ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE0, - AR934X_OPER_MODE0_MAC_GMII_EN); - } else if (ag->phy_if_mode == PHY_INTERFACE_MODE_MII) { - ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE0, - AR934X_OPER_MODE0_PHY_MII_EN); - } else { - pr_err("%s: invalid PHY interface mode\n", - dev_name(&mii->dev)); - goto err_free; - } - - if (of_property_read_bool(np, "phy4-mii-enable")) { - ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE1, - AR934X_REG_OPER_MODE1_PHY4_MII_EN); - swdev->ports = AR7240_NUM_PORTS - 1; - } else { - swdev->ports = AR7240_NUM_PORTS; - } - } else { - pr_err("%s: unsupported chip, ctrl=%08x\n", - dev_name(&mii->dev), ctrl); - goto err_free; - } - - swdev->cpu_port = AR7240_PORT_CPU; - swdev->vlans = AR7240_MAX_VLANS; - swdev->ops = &ar7240_ops; - - if (register_switch(&as->swdev, ag->dev) < 0) - goto err_free; - - pr_info("%s: Found an %s\n", dev_name(&mii->dev), swdev->name); - - /* initialize defaults */ - for (i = 0; i < AR7240_MAX_VLANS; i++) - as->vlan_id[i] = i; - - as->vlan_table[0] = ar7240sw_port_mask_all(as); - - return as; - -err_free: - kfree(as); - return NULL; -} - -void ag71xx_ar7240_start(struct ag71xx *ag) -{ - struct ar7240sw *as = ag->phy_priv; - - if (!as) - return; - - ar7240sw_reset(as); - - ar7240_set_addr(as, ag->dev->dev_addr); - ar7240_hw_apply(&as->swdev); -} - -int ag71xx_ar7240_init(struct ag71xx *ag, struct device_node *np) -{ - struct ar7240sw *as; - - as = ar7240_probe(ag, np); - if (!as) - return -ENODEV; - - ag->phy_priv = as; - ar7240sw_reset(as); - - rwlock_init(&as->stats_lock); - - return 0; -} - -void ag71xx_ar7240_cleanup(struct ag71xx *ag) -{ - struct ar7240sw *as = ag->phy_priv; - - if (!as) - return; - - unregister_switch(&as->swdev); - kfree(as); - ag->phy_priv = NULL; -} diff --git a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_debugfs.c b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_debugfs.c deleted file mode 100644 index 20cf1c1..0000000 --- a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_debugfs.c +++ /dev/null @@ -1,285 +0,0 @@ -/* - * Atheros AR71xx built-in ethernet mac driver - * - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Based on Atheros' AG7100 driver - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/debugfs.h> - -#include "ag71xx.h" - -static struct dentry *ag71xx_debugfs_root; - -static int ag71xx_debugfs_generic_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - -void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status) -{ - if (status) - ag->debug.int_stats.total++; - if (status & AG71XX_INT_TX_PS) - ag->debug.int_stats.tx_ps++; - if (status & AG71XX_INT_TX_UR) - ag->debug.int_stats.tx_ur++; - if (status & AG71XX_INT_TX_BE) - ag->debug.int_stats.tx_be++; - if (status & AG71XX_INT_RX_PR) - ag->debug.int_stats.rx_pr++; - if (status & AG71XX_INT_RX_OF) - ag->debug.int_stats.rx_of++; - if (status & AG71XX_INT_RX_BE) - ag->debug.int_stats.rx_be++; -} - -static ssize_t read_file_int_stats(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ -#define PR_INT_STAT(_label, _field) \ - len += snprintf(buf + len, sizeof(buf) - len, \ - "%20s: %10lu\n", _label, ag->debug.int_stats._field); - - struct ag71xx *ag = file->private_data; - char buf[256]; - unsigned int len = 0; - - PR_INT_STAT("TX Packet Sent", tx_ps); - PR_INT_STAT("TX Underrun", tx_ur); - PR_INT_STAT("TX Bus Error", tx_be); - PR_INT_STAT("RX Packet Received", rx_pr); - PR_INT_STAT("RX Overflow", rx_of); - PR_INT_STAT("RX Bus Error", rx_be); - len += snprintf(buf + len, sizeof(buf) - len, "\n"); - PR_INT_STAT("Total", total); - - return simple_read_from_buffer(user_buf, count, ppos, buf, len); -#undef PR_INT_STAT -} - -static const struct file_operations ag71xx_fops_int_stats = { - .open = ag71xx_debugfs_generic_open, - .read = read_file_int_stats, - .owner = THIS_MODULE -}; - -void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx) -{ - struct ag71xx_napi_stats *stats = &ag->debug.napi_stats; - - if (rx) { - stats->rx_count++; - stats->rx_packets += rx; - if (rx <= AG71XX_NAPI_WEIGHT) - stats->rx[rx]++; - if (rx > stats->rx_packets_max) - stats->rx_packets_max = rx; - } - - if (tx) { - stats->tx_count++; - stats->tx_packets += tx; - if (tx <= AG71XX_NAPI_WEIGHT) - stats->tx[tx]++; - if (tx > stats->tx_packets_max) - stats->tx_packets_max = tx; - } -} - -static ssize_t read_file_napi_stats(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ag71xx *ag = file->private_data; - struct ag71xx_napi_stats *stats = &ag->debug.napi_stats; - char *buf; - unsigned int buflen; - unsigned int len = 0; - unsigned long rx_avg = 0; - unsigned long tx_avg = 0; - int ret; - int i; - - buflen = 2048; - buf = kmalloc(buflen, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - if (stats->rx_count) - rx_avg = stats->rx_packets / stats->rx_count; - - if (stats->tx_count) - tx_avg = stats->tx_packets / stats->tx_count; - - len += snprintf(buf + len, buflen - len, "%3s %10s %10s\n", - "len", "rx", "tx"); - - for (i = 1; i <= AG71XX_NAPI_WEIGHT; i++) - len += snprintf(buf + len, buflen - len, - "%3d: %10lu %10lu\n", - i, stats->rx[i], stats->tx[i]); - - len += snprintf(buf + len, buflen - len, "\n"); - - len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n", - "sum", stats->rx_count, stats->tx_count); - len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n", - "avg", rx_avg, tx_avg); - len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n", - "max", stats->rx_packets_max, stats->tx_packets_max); - len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n", - "pkt", stats->rx_packets, stats->tx_packets); - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); - kfree(buf); - - return ret; -} - -static const struct file_operations ag71xx_fops_napi_stats = { - .open = ag71xx_debugfs_generic_open, - .read = read_file_napi_stats, - .owner = THIS_MODULE -}; - -#define DESC_PRINT_LEN 64 - -static ssize_t read_file_ring(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos, - struct ag71xx *ag, - struct ag71xx_ring *ring, - unsigned desc_reg) -{ - int ring_size = BIT(ring->order); - int ring_mask = ring_size - 1; - char *buf; - unsigned int buflen; - unsigned int len = 0; - unsigned long flags; - ssize_t ret; - int curr; - int dirty; - u32 desc_hw; - int i; - - buflen = (ring_size * DESC_PRINT_LEN); - buf = kmalloc(buflen, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - len += snprintf(buf + len, buflen - len, - "Idx ... %-8s %-8s %-8s %-8s .\n", - "desc", "next", "data", "ctrl"); - - spin_lock_irqsave(&ag->lock, flags); - - curr = (ring->curr & ring_mask); - dirty = (ring->dirty & ring_mask); - desc_hw = ag71xx_rr(ag, desc_reg); - for (i = 0; i < ring_size; i++) { - struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i); - u32 desc_dma = ((u32) ring->descs_dma) + i * AG71XX_DESC_SIZE; - - len += snprintf(buf + len, buflen - len, - "%3d %c%c%c %08x %08x %08x %08x %c\n", - i, - (i == curr) ? 'C' : ' ', - (i == dirty) ? 'D' : ' ', - (desc_hw == desc_dma) ? 'H' : ' ', - desc_dma, - desc->next, - desc->data, - desc->ctrl, - (desc->ctrl & DESC_EMPTY) ? 'E' : '*'); - } - - spin_unlock_irqrestore(&ag->lock, flags); - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); - kfree(buf); - - return ret; -} - -static ssize_t read_file_tx_ring(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ag71xx *ag = file->private_data; - - return read_file_ring(file, user_buf, count, ppos, ag, &ag->tx_ring, - AG71XX_REG_TX_DESC); -} - -static const struct file_operations ag71xx_fops_tx_ring = { - .open = ag71xx_debugfs_generic_open, - .read = read_file_tx_ring, - .owner = THIS_MODULE -}; - -static ssize_t read_file_rx_ring(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ag71xx *ag = file->private_data; - - return read_file_ring(file, user_buf, count, ppos, ag, &ag->rx_ring, - AG71XX_REG_RX_DESC); -} - -static const struct file_operations ag71xx_fops_rx_ring = { - .open = ag71xx_debugfs_generic_open, - .read = read_file_rx_ring, - .owner = THIS_MODULE -}; - -void ag71xx_debugfs_exit(struct ag71xx *ag) -{ - debugfs_remove_recursive(ag->debug.debugfs_dir); -} - -int ag71xx_debugfs_init(struct ag71xx *ag) -{ - struct device *dev = &ag->pdev->dev; - - ag->debug.debugfs_dir = debugfs_create_dir(dev_name(dev), - ag71xx_debugfs_root); - if (!ag->debug.debugfs_dir) { - dev_err(dev, "unable to create debugfs directory\n"); - return -ENOENT; - } - - debugfs_create_file("int_stats", S_IRUGO, ag->debug.debugfs_dir, - ag, &ag71xx_fops_int_stats); - debugfs_create_file("napi_stats", S_IRUGO, ag->debug.debugfs_dir, - ag, &ag71xx_fops_napi_stats); - debugfs_create_file("tx_ring", S_IRUGO, ag->debug.debugfs_dir, - ag, &ag71xx_fops_tx_ring); - debugfs_create_file("rx_ring", S_IRUGO, ag->debug.debugfs_dir, - ag, &ag71xx_fops_rx_ring); - - return 0; -} - -int ag71xx_debugfs_root_init(void) -{ - if (ag71xx_debugfs_root) - return -EBUSY; - - ag71xx_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL); - if (!ag71xx_debugfs_root) - return -ENOENT; - - return 0; -} - -void ag71xx_debugfs_root_exit(void) -{ - debugfs_remove(ag71xx_debugfs_root); - ag71xx_debugfs_root = NULL; -} diff --git a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c deleted file mode 100644 index 6f37fda..0000000 --- a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * Atheros AR71xx built-in ethernet mac driver - * - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Based on Atheros' AG7100 driver - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include "ag71xx.h" - -static int ag71xx_ethtool_get_settings(struct net_device *dev, - struct ethtool_cmd *cmd) -{ - struct ag71xx *ag = netdev_priv(dev); - struct phy_device *phydev = ag->phy_dev; - - if (!phydev) - return -ENODEV; - - return phy_ethtool_ioctl(phydev, cmd); -} - -static int ag71xx_ethtool_set_settings(struct net_device *dev, - struct ethtool_cmd *cmd) -{ - struct ag71xx *ag = netdev_priv(dev); - struct phy_device *phydev = ag->phy_dev; - - if (!phydev) - return -ENODEV; - - return phy_ethtool_ioctl(phydev, cmd); -} - -static u32 ag71xx_ethtool_get_msglevel(struct net_device *dev) -{ - struct ag71xx *ag = netdev_priv(dev); - - return ag->msg_enable; -} - -static void ag71xx_ethtool_set_msglevel(struct net_device *dev, u32 msg_level) -{ - struct ag71xx *ag = netdev_priv(dev); - - ag->msg_enable = msg_level; -} - -static void ag71xx_ethtool_get_ringparam(struct net_device *dev, - struct ethtool_ringparam *er) -{ - struct ag71xx *ag = netdev_priv(dev); - - er->tx_max_pending = AG71XX_TX_RING_SIZE_MAX; - er->rx_max_pending = AG71XX_RX_RING_SIZE_MAX; - er->rx_mini_max_pending = 0; - er->rx_jumbo_max_pending = 0; - - er->tx_pending = BIT(ag->tx_ring.order); - er->rx_pending = BIT(ag->rx_ring.order); - er->rx_mini_pending = 0; - er->rx_jumbo_pending = 0; - - if (ag->tx_ring.desc_split) - er->tx_pending /= AG71XX_TX_RING_DS_PER_PKT; -} - -static int ag71xx_ethtool_set_ringparam(struct net_device *dev, - struct ethtool_ringparam *er) -{ - struct ag71xx *ag = netdev_priv(dev); - unsigned tx_size; - unsigned rx_size; - int err = 0; - - if (er->rx_mini_pending != 0|| - er->rx_jumbo_pending != 0 || - er->rx_pending == 0 || - er->tx_pending == 0) - return -EINVAL; - - tx_size = er->tx_pending < AG71XX_TX_RING_SIZE_MAX ? - er->tx_pending : AG71XX_TX_RING_SIZE_MAX; - - rx_size = er->rx_pending < AG71XX_RX_RING_SIZE_MAX ? - er->rx_pending : AG71XX_RX_RING_SIZE_MAX; - - if (netif_running(dev)) { - err = dev->netdev_ops->ndo_stop(dev); - if (err) - return err; - } - - if (ag->tx_ring.desc_split) - tx_size *= AG71XX_TX_RING_DS_PER_PKT; - - ag->tx_ring.order = ag71xx_ring_size_order(tx_size); - ag->rx_ring.order = ag71xx_ring_size_order(rx_size); - - if (netif_running(dev)) - err = dev->netdev_ops->ndo_open(dev); - - return err; -} - -struct ethtool_ops ag71xx_ethtool_ops = { - .set_settings = ag71xx_ethtool_set_settings, - .get_settings = ag71xx_ethtool_get_settings, - .get_msglevel = ag71xx_ethtool_get_msglevel, - .set_msglevel = ag71xx_ethtool_set_msglevel, - .get_ringparam = ag71xx_ethtool_get_ringparam, - .set_ringparam = ag71xx_ethtool_set_ringparam, - .get_link = ethtool_op_get_link, - .get_ts_info = ethtool_op_get_ts_info, -}; diff --git a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c deleted file mode 100644 index 3c07adb..0000000 --- a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c +++ /dev/null @@ -1,1611 +0,0 @@ -/* - * Atheros AR71xx built-in ethernet mac driver - * - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Based on Atheros' AG7100 driver - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/sizes.h> -#include <linux/of_net.h> -#include <linux/of_address.h> -#include "ag71xx.h" - -#define AG71XX_DEFAULT_MSG_ENABLE \ - (NETIF_MSG_DRV \ - | NETIF_MSG_PROBE \ - | NETIF_MSG_LINK \ - | NETIF_MSG_TIMER \ - | NETIF_MSG_IFDOWN \ - | NETIF_MSG_IFUP \ - | NETIF_MSG_RX_ERR \ - | NETIF_MSG_TX_ERR) - -static int ag71xx_msg_level = -1; - -module_param_named(msg_level, ag71xx_msg_level, int, 0); -MODULE_PARM_DESC(msg_level, "Message level (-1=defaults,0=none,...,16=all)"); - -#define ETH_SWITCH_HEADER_LEN 2 - -static int ag71xx_tx_packets(struct ag71xx *ag, bool flush); - -static inline unsigned int ag71xx_max_frame_len(unsigned int mtu) -{ - return ETH_SWITCH_HEADER_LEN + ETH_HLEN + VLAN_HLEN + mtu + ETH_FCS_LEN; -} - -static void ag71xx_dump_dma_regs(struct ag71xx *ag) -{ - DBG("%s: dma_tx_ctrl=%08x, dma_tx_desc=%08x, dma_tx_status=%08x\n", - ag->dev->name, - ag71xx_rr(ag, AG71XX_REG_TX_CTRL), - ag71xx_rr(ag, AG71XX_REG_TX_DESC), - ag71xx_rr(ag, AG71XX_REG_TX_STATUS)); - - DBG("%s: dma_rx_ctrl=%08x, dma_rx_desc=%08x, dma_rx_status=%08x\n", - ag->dev->name, - ag71xx_rr(ag, AG71XX_REG_RX_CTRL), - ag71xx_rr(ag, AG71XX_REG_RX_DESC), - ag71xx_rr(ag, AG71XX_REG_RX_STATUS)); -} - -static inline void ag71xx_dump_intr(struct ag71xx *ag, char *label, u32 intr) -{ - DBG("%s: %s intr=%08x %s%s%s%s%s%s\n", - ag->dev->name, label, intr, - (intr & AG71XX_INT_TX_PS) ? "TXPS " : "", - (intr & AG71XX_INT_TX_UR) ? "TXUR " : "", - (intr & AG71XX_INT_TX_BE) ? "TXBE " : "", - (intr & AG71XX_INT_RX_PR) ? "RXPR " : "", - (intr & AG71XX_INT_RX_OF) ? "RXOF " : "", - (intr & AG71XX_INT_RX_BE) ? "RXBE " : ""); -} - -static void ag71xx_ring_tx_clean(struct ag71xx *ag) -{ - struct ag71xx_ring *ring = &ag->tx_ring; - struct net_device *dev = ag->dev; - int ring_mask = BIT(ring->order) - 1; - u32 bytes_compl = 0, pkts_compl = 0; - - while (ring->curr != ring->dirty) { - struct ag71xx_desc *desc; - u32 i = ring->dirty & ring_mask; - - desc = ag71xx_ring_desc(ring, i); - if (!ag71xx_desc_empty(desc)) { - desc->ctrl = 0; - dev->stats.tx_errors++; - } - - if (ring->buf[i].skb) { - bytes_compl += ring->buf[i].len; - pkts_compl++; - dev_kfree_skb_any(ring->buf[i].skb); - } - ring->buf[i].skb = NULL; - ring->dirty++; - } - - /* flush descriptors */ - wmb(); - - netdev_completed_queue(dev, pkts_compl, bytes_compl); -} - -static void ag71xx_ring_tx_init(struct ag71xx *ag) -{ - struct ag71xx_ring *ring = &ag->tx_ring; - int ring_size = BIT(ring->order); - int ring_mask = ring_size - 1; - int i; - - for (i = 0; i < ring_size; i++) { - struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i); - - desc->next = (u32) (ring->descs_dma + - AG71XX_DESC_SIZE * ((i + 1) & ring_mask)); - - desc->ctrl = DESC_EMPTY; - ring->buf[i].skb = NULL; - } - - /* flush descriptors */ - wmb(); - - ring->curr = 0; - ring->dirty = 0; - netdev_reset_queue(ag->dev); -} - -static void ag71xx_ring_rx_clean(struct ag71xx *ag) -{ - struct ag71xx_ring *ring = &ag->rx_ring; - int ring_size = BIT(ring->order); - int i; - - if (!ring->buf) - return; - - for (i = 0; i < ring_size; i++) - if (ring->buf[i].rx_buf) { - dma_unmap_single(&ag->dev->dev, ring->buf[i].dma_addr, - ag->rx_buf_size, DMA_FROM_DEVICE); - skb_free_frag(ring->buf[i].rx_buf); - } -} - -static int ag71xx_buffer_size(struct ag71xx *ag) -{ - return ag->rx_buf_size + - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); -} - -static bool ag71xx_fill_rx_buf(struct ag71xx *ag, struct ag71xx_buf *buf, - int offset, - void *(*alloc)(unsigned int size)) -{ - struct ag71xx_ring *ring = &ag->rx_ring; - struct ag71xx_desc *desc = ag71xx_ring_desc(ring, buf - &ring->buf[0]); - void *data; - - data = alloc(ag71xx_buffer_size(ag)); - if (!data) - return false; - - buf->rx_buf = data; - buf->dma_addr = dma_map_single(&ag->dev->dev, data, ag->rx_buf_size, - DMA_FROM_DEVICE); - desc->data = (u32) buf->dma_addr + offset; - return true; -} - -static int ag71xx_ring_rx_init(struct ag71xx *ag) -{ - struct ag71xx_ring *ring = &ag->rx_ring; - int ring_size = BIT(ring->order); - int ring_mask = BIT(ring->order) - 1; - unsigned int i; - int ret; - - ret = 0; - for (i = 0; i < ring_size; i++) { - struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i); - - desc->next = (u32) (ring->descs_dma + - AG71XX_DESC_SIZE * ((i + 1) & ring_mask)); - - DBG("ag71xx: RX desc at %p, next is %08x\n", - desc, desc->next); - } - - for (i = 0; i < ring_size; i++) { - struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i); - - if (!ag71xx_fill_rx_buf(ag, &ring->buf[i], ag->rx_buf_offset, - netdev_alloc_frag)) { - ret = -ENOMEM; - break; - } - - desc->ctrl = DESC_EMPTY; - } - - /* flush descriptors */ - wmb(); - - ring->curr = 0; - ring->dirty = 0; - - return ret; -} - -static int ag71xx_ring_rx_refill(struct ag71xx *ag) -{ - struct ag71xx_ring *ring = &ag->rx_ring; - int ring_mask = BIT(ring->order) - 1; - unsigned int count; - int offset = ag->rx_buf_offset; - - count = 0; - for (; ring->curr - ring->dirty > 0; ring->dirty++) { - struct ag71xx_desc *desc; - unsigned int i; - - i = ring->dirty & ring_mask; - desc = ag71xx_ring_desc(ring, i); - - if (!ring->buf[i].rx_buf && - !ag71xx_fill_rx_buf(ag, &ring->buf[i], offset, - napi_alloc_frag)) - break; - - desc->ctrl = DESC_EMPTY; - count++; - } - - /* flush descriptors */ - wmb(); - - DBG("%s: %u rx descriptors refilled\n", ag->dev->name, count); - - return count; -} - -static int ag71xx_rings_init(struct ag71xx *ag) -{ - struct ag71xx_ring *tx = &ag->tx_ring; - struct ag71xx_ring *rx = &ag->rx_ring; - int ring_size = BIT(tx->order) + BIT(rx->order); - int tx_size = BIT(tx->order); - - tx->buf = kzalloc(ring_size * sizeof(*tx->buf), GFP_KERNEL); - if (!tx->buf) - return -ENOMEM; - - tx->descs_cpu = dma_alloc_coherent(NULL, ring_size * AG71XX_DESC_SIZE, - &tx->descs_dma, GFP_ATOMIC); - if (!tx->descs_cpu) { - kfree(tx->buf); - tx->buf = NULL; - return -ENOMEM; - } - - rx->buf = &tx->buf[BIT(tx->order)]; - rx->descs_cpu = ((void *)tx->descs_cpu) + tx_size * AG71XX_DESC_SIZE; - rx->descs_dma = tx->descs_dma + tx_size * AG71XX_DESC_SIZE; - - ag71xx_ring_tx_init(ag); - return ag71xx_ring_rx_init(ag); -} - -static void ag71xx_rings_free(struct ag71xx *ag) -{ - struct ag71xx_ring *tx = &ag->tx_ring; - struct ag71xx_ring *rx = &ag->rx_ring; - int ring_size = BIT(tx->order) + BIT(rx->order); - - if (tx->descs_cpu) - dma_free_coherent(NULL, ring_size * AG71XX_DESC_SIZE, - tx->descs_cpu, tx->descs_dma); - - kfree(tx->buf); - - tx->descs_cpu = NULL; - rx->descs_cpu = NULL; - tx->buf = NULL; - rx->buf = NULL; -} - -static void ag71xx_rings_cleanup(struct ag71xx *ag) -{ - ag71xx_ring_rx_clean(ag); - ag71xx_ring_tx_clean(ag); - ag71xx_rings_free(ag); - - netdev_reset_queue(ag->dev); -} - -static unsigned char *ag71xx_speed_str(struct ag71xx *ag) -{ - switch (ag->speed) { - case SPEED_1000: - return "1000"; - case SPEED_100: - return "100"; - case SPEED_10: - return "10"; - } - - return "?"; -} - -static void ag71xx_hw_set_macaddr(struct ag71xx *ag, unsigned char *mac) -{ - u32 t; - - t = (((u32) mac[5]) << 24) | (((u32) mac[4]) << 16) - | (((u32) mac[3]) << 8) | ((u32) mac[2]); - - ag71xx_wr(ag, AG71XX_REG_MAC_ADDR1, t); - - t = (((u32) mac[1]) << 24) | (((u32) mac[0]) << 16); - ag71xx_wr(ag, AG71XX_REG_MAC_ADDR2, t); -} - -static void ag71xx_dma_reset(struct ag71xx *ag) -{ - u32 val; - int i; - - ag71xx_dump_dma_regs(ag); - - /* stop RX and TX */ - ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0); - ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0); - - /* - * give the hardware some time to really stop all rx/tx activity - * clearing the descriptors too early causes random memory corruption - */ - mdelay(1); - - /* clear descriptor addresses */ - ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->stop_desc_dma); - ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->stop_desc_dma); - - /* clear pending RX/TX interrupts */ - for (i = 0; i < 256; i++) { - ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR); - ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS); - } - - /* clear pending errors */ - ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE | RX_STATUS_OF); - ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE | TX_STATUS_UR); - - val = ag71xx_rr(ag, AG71XX_REG_RX_STATUS); - if (val) - pr_alert("%s: unable to clear DMA Rx status: %08x\n", - ag->dev->name, val); - - val = ag71xx_rr(ag, AG71XX_REG_TX_STATUS); - - /* mask out reserved bits */ - val &= ~0xff000000; - - if (val) - pr_alert("%s: unable to clear DMA Tx status: %08x\n", - ag->dev->name, val); - - ag71xx_dump_dma_regs(ag); -} - -#define MAC_CFG1_INIT (MAC_CFG1_RXE | MAC_CFG1_TXE | \ - MAC_CFG1_SRX | MAC_CFG1_STX) - -#define FIFO_CFG0_INIT (FIFO_CFG0_ALL << FIFO_CFG0_ENABLE_SHIFT) - -#define FIFO_CFG4_INIT (FIFO_CFG4_DE | FIFO_CFG4_DV | FIFO_CFG4_FC | \ - FIFO_CFG4_CE | FIFO_CFG4_CR | FIFO_CFG4_LM | \ - FIFO_CFG4_LO | FIFO_CFG4_OK | FIFO_CFG4_MC | \ - FIFO_CFG4_BC | FIFO_CFG4_DR | FIFO_CFG4_LE | \ - FIFO_CFG4_CF | FIFO_CFG4_PF | FIFO_CFG4_UO | \ - FIFO_CFG4_VT) - -#define FIFO_CFG5_INIT (FIFO_CFG5_DE | FIFO_CFG5_DV | FIFO_CFG5_FC | \ - FIFO_CFG5_CE | FIFO_CFG5_LO | FIFO_CFG5_OK | \ - FIFO_CFG5_MC | FIFO_CFG5_BC | FIFO_CFG5_DR | \ - FIFO_CFG5_CF | FIFO_CFG5_PF | FIFO_CFG5_VT | \ - FIFO_CFG5_LE | FIFO_CFG5_FT | FIFO_CFG5_16 | \ - FIFO_CFG5_17 | FIFO_CFG5_SF) - -static void ag71xx_hw_stop(struct ag71xx *ag) -{ - /* disable all interrupts and stop the rx/tx engine */ - ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, 0); - ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0); - ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0); -} - -static void ag71xx_hw_setup(struct ag71xx *ag) -{ - struct device_node *np = ag->pdev->dev.of_node; - u32 init = MAC_CFG1_INIT; - - /* setup MAC configuration registers */ - if (of_property_read_bool(np, "flow-control")) - init |= MAC_CFG1_TFC | MAC_CFG1_RFC; - ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, init); - - ag71xx_sb(ag, AG71XX_REG_MAC_CFG2, - MAC_CFG2_PAD_CRC_EN | MAC_CFG2_LEN_CHECK); - - /* setup max frame length to zero */ - ag71xx_wr(ag, AG71XX_REG_MAC_MFL, 0); - - /* setup FIFO configuration registers */ - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG0, FIFO_CFG0_INIT); - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, ag->fifodata[0]); - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, ag->fifodata[1]); - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG4, FIFO_CFG4_INIT); - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, FIFO_CFG5_INIT); -} - -static void ag71xx_hw_init(struct ag71xx *ag) -{ - ag71xx_hw_stop(ag); - - if (ag->phy_reset) { - reset_control_assert(ag->phy_reset); - msleep(50); - reset_control_deassert(ag->phy_reset); - msleep(200); - } - - ag71xx_sb(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_SR); - udelay(20); - - reset_control_assert(ag->mac_reset); - msleep(100); - reset_control_deassert(ag->mac_reset); - msleep(200); - - ag71xx_hw_setup(ag); - - ag71xx_dma_reset(ag); -} - -static void ag71xx_fast_reset(struct ag71xx *ag) -{ - struct net_device *dev = ag->dev; - u32 rx_ds; - u32 mii_reg; - - ag71xx_hw_stop(ag); - wmb(); - - mii_reg = ag71xx_rr(ag, AG71XX_REG_MII_CFG); - rx_ds = ag71xx_rr(ag, AG71XX_REG_RX_DESC); - - ag71xx_tx_packets(ag, true); - - reset_control_assert(ag->mac_reset); - udelay(10); - reset_control_deassert(ag->mac_reset); - udelay(10); - - ag71xx_dma_reset(ag); - ag71xx_hw_setup(ag); - ag->tx_ring.curr = 0; - ag->tx_ring.dirty = 0; - netdev_reset_queue(ag->dev); - - /* setup max frame length */ - ag71xx_wr(ag, AG71XX_REG_MAC_MFL, - ag71xx_max_frame_len(ag->dev->mtu)); - - ag71xx_wr(ag, AG71XX_REG_RX_DESC, rx_ds); - ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->tx_ring.descs_dma); - ag71xx_wr(ag, AG71XX_REG_MII_CFG, mii_reg); - - ag71xx_hw_set_macaddr(ag, dev->dev_addr); -} - -static void ag71xx_hw_start(struct ag71xx *ag) -{ - /* start RX engine */ - ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE); - - /* enable interrupts */ - ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, AG71XX_INT_INIT); - - netif_wake_queue(ag->dev); -} - -static void ath79_set_pllval(struct ag71xx *ag) -{ - u32 pll_reg = ag->pllreg[1]; - u32 pll_val; - - if (!ag->pllregmap) - return; - - switch (ag->speed) { - case SPEED_10: - pll_val = ag->plldata[2]; - break; - case SPEED_100: - pll_val = ag->plldata[1]; - break; - case SPEED_1000: - pll_val = ag->plldata[0]; - break; - default: - BUG(); - } - - if (pll_val) - regmap_write(ag->pllregmap, pll_reg, pll_val); -} - -static void ath79_set_pll(struct ag71xx *ag) -{ - u32 pll_cfg = ag->pllreg[0]; - u32 pll_shift = ag->pllreg[2]; - - if (!ag->pllregmap) - return; - - regmap_update_bits(ag->pllregmap, pll_cfg, 3 << pll_shift, 2 << pll_shift); - udelay(100); - - ath79_set_pllval(ag); - - regmap_update_bits(ag->pllregmap, pll_cfg, 3 << pll_shift, 3 << pll_shift); - udelay(100); - - regmap_update_bits(ag->pllregmap, pll_cfg, 3 << pll_shift, 0); - udelay(100); -} - -static void ath79_mii_ctrl_set_speed(struct ag71xx *ag) -{ - unsigned int mii_speed; - u32 t; - - if (!ag->mii_base) - return; - - switch (ag->speed) { - case SPEED_10: - mii_speed = AR71XX_MII_CTRL_SPEED_10; - break; - case SPEED_100: - mii_speed = AR71XX_MII_CTRL_SPEED_100; - break; - case SPEED_1000: - mii_speed = AR71XX_MII_CTRL_SPEED_1000; - break; - default: - BUG(); - } - - t = __raw_readl(ag->mii_base); - t &= ~(AR71XX_MII_CTRL_IF_MASK); - t |= (mii_speed & AR71XX_MII_CTRL_IF_MASK); - __raw_writel(t, ag->mii_base); -} - -static void -__ag71xx_link_adjust(struct ag71xx *ag, bool update) -{ - struct device_node *np = ag->pdev->dev.of_node; - u32 cfg2; - u32 ifctl; - u32 fifo5; - - if (!ag->link && update) { - ag71xx_hw_stop(ag); - netif_carrier_off(ag->dev); - if (netif_msg_link(ag)) - pr_info("%s: link down\n", ag->dev->name); - return; - } - - if (!of_device_is_compatible(np, "qca,ar9130-eth") && - !of_device_is_compatible(np, "qca,ar7100-eth")) - ag71xx_fast_reset(ag); - - cfg2 = ag71xx_rr(ag, AG71XX_REG_MAC_CFG2); - cfg2 &= ~(MAC_CFG2_IF_1000 | MAC_CFG2_IF_10_100 | MAC_CFG2_FDX); - cfg2 |= (ag->duplex) ? MAC_CFG2_FDX : 0; - - ifctl = ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL); - ifctl &= ~(MAC_IFCTL_SPEED); - - fifo5 = ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5); - fifo5 &= ~FIFO_CFG5_BM; - - switch (ag->speed) { - case SPEED_1000: - cfg2 |= MAC_CFG2_IF_1000; - fifo5 |= FIFO_CFG5_BM; - break; - case SPEED_100: - cfg2 |= MAC_CFG2_IF_10_100; - ifctl |= MAC_IFCTL_SPEED; - break; - case SPEED_10: - cfg2 |= MAC_CFG2_IF_10_100; - break; - default: - BUG(); - return; - } - - if (ag->tx_ring.desc_split) { - ag->fifodata[2] &= 0xffff; - ag->fifodata[2] |= ((2048 - ag->tx_ring.desc_split) / 4) << 16; - } - - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, ag->fifodata[2]); - - if (update) { - if (of_device_is_compatible(np, "qca,ar7100-eth")) { - ath79_set_pll(ag); - ath79_mii_ctrl_set_speed(ag); - } else if (of_device_is_compatible(np, "qca,ar7242-eth")) { - ath79_set_pll(ag); - } else if (of_device_is_compatible(np, "qca,ar9130-eth")) { - } else if (of_device_is_compatible(np, "qca,ar9340-eth")) { - } else if (of_device_is_compatible(np, "qca,qca9550-eth")) { - } else if (of_device_is_compatible(np, "qca,qca9560-eth")) { - } - } - - ag71xx_wr(ag, AG71XX_REG_MAC_CFG2, cfg2); - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, fifo5); - ag71xx_wr(ag, AG71XX_REG_MAC_IFCTL, ifctl); - - if (of_device_is_compatible(np, "qca,qca9530-eth")) { - /* - * The rx ring buffer can stall on small packets on QCA953x and - * QCA956x. Disabling the inline checksum engine fixes the stall. - * The wr, rr functions cannot be used since this hidden register - * is outside of the normal ag71xx register block. - */ - void __iomem *dam = ioremap_nocache(0xb90001bc, 0x4); - if (dam) { - __raw_writel(__raw_readl(dam) & ~BIT(27), dam); - (void)__raw_readl(dam); - iounmap(dam); - } - } - - ag71xx_hw_start(ag); - - netif_carrier_on(ag->dev); - if (update && netif_msg_link(ag)) - pr_info("%s: link up (%sMbps/%s duplex)\n", - ag->dev->name, - ag71xx_speed_str(ag), - (DUPLEX_FULL == ag->duplex) ? "Full" : "Half"); - - DBG("%s: fifo_cfg0=%#x, fifo_cfg1=%#x, fifo_cfg2=%#x\n", - ag->dev->name, - ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0), - ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1), - ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2)); - - DBG("%s: fifo_cfg3=%#x, fifo_cfg4=%#x, fifo_cfg5=%#x\n", - ag->dev->name, - ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3), - ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4), - ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5)); - - DBG("%s: mac_cfg2=%#x, mac_ifctl=%#x\n", - ag->dev->name, - ag71xx_rr(ag, AG71XX_REG_MAC_CFG2), - ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL)); -} - -void ag71xx_link_adjust(struct ag71xx *ag) -{ - __ag71xx_link_adjust(ag, true); -} - -static int ag71xx_hw_enable(struct ag71xx *ag) -{ - int ret; - - ret = ag71xx_rings_init(ag); - if (ret) - return ret; - - napi_enable(&ag->napi); - ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->tx_ring.descs_dma); - ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->rx_ring.descs_dma); - netif_start_queue(ag->dev); - - return 0; -} - -static void ag71xx_hw_disable(struct ag71xx *ag) -{ - unsigned long flags; - - spin_lock_irqsave(&ag->lock, flags); - - netif_stop_queue(ag->dev); - - ag71xx_hw_stop(ag); - ag71xx_dma_reset(ag); - - napi_disable(&ag->napi); - del_timer_sync(&ag->oom_timer); - - spin_unlock_irqrestore(&ag->lock, flags); - - ag71xx_rings_cleanup(ag); -} - -static int ag71xx_open(struct net_device *dev) -{ - struct ag71xx *ag = netdev_priv(dev); - unsigned int max_frame_len; - int ret; - - netif_carrier_off(dev); - max_frame_len = ag71xx_max_frame_len(dev->mtu); - ag->rx_buf_size = SKB_DATA_ALIGN(max_frame_len + NET_SKB_PAD + NET_IP_ALIGN); - - /* setup max frame length */ - ag71xx_wr(ag, AG71XX_REG_MAC_MFL, max_frame_len); - ag71xx_hw_set_macaddr(ag, dev->dev_addr); - - ret = ag71xx_hw_enable(ag); - if (ret) - goto err; - - ag71xx_ar7240_start(ag); - phy_start(ag->phy_dev); - - return 0; - -err: - ag71xx_rings_cleanup(ag); - return ret; -} - -static int ag71xx_stop(struct net_device *dev) -{ - struct ag71xx *ag = netdev_priv(dev); - - netif_carrier_off(dev); - phy_stop(ag->phy_dev); - ag71xx_hw_disable(ag); - - return 0; -} - -static int ag71xx_fill_dma_desc(struct ag71xx_ring *ring, u32 addr, int len) -{ - int i; - struct ag71xx_desc *desc; - int ring_mask = BIT(ring->order) - 1; - int ndesc = 0; - int split = ring->desc_split; - - if (!split) - split = len; - - while (len > 0) { - unsigned int cur_len = len; - - i = (ring->curr + ndesc) & ring_mask; - desc = ag71xx_ring_desc(ring, i); - - if (!ag71xx_desc_empty(desc)) - return -1; - - if (cur_len > split) { - cur_len = split; - - /* - * TX will hang if DMA transfers <= 4 bytes, - * make sure next segment is more than 4 bytes long. - */ - if (len <= split + 4) - cur_len -= 4; - } - - desc->data = addr; - addr += cur_len; - len -= cur_len; - - if (len > 0) - cur_len |= DESC_MORE; - - /* prevent early tx attempt of this descriptor */ - if (!ndesc) - cur_len |= DESC_EMPTY; - - desc->ctrl = cur_len; - ndesc++; - } - - return ndesc; -} - -static netdev_tx_t ag71xx_hard_start_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct ag71xx *ag = netdev_priv(dev); - struct ag71xx_ring *ring = &ag->tx_ring; - int ring_mask = BIT(ring->order) - 1; - int ring_size = BIT(ring->order); - struct ag71xx_desc *desc; - dma_addr_t dma_addr; - int i, n, ring_min; - - if (skb->len <= 4) { - DBG("%s: packet len is too small\n", ag->dev->name); - goto err_drop; - } - - dma_addr = dma_map_single(&dev->dev, skb->data, skb->len, - DMA_TO_DEVICE); - - i = ring->curr & ring_mask; - desc = ag71xx_ring_desc(ring, i); - - /* setup descriptor fields */ - n = ag71xx_fill_dma_desc(ring, (u32) dma_addr, skb->len & ag->desc_pktlen_mask); - if (n < 0) - goto err_drop_unmap; - - i = (ring->curr + n - 1) & ring_mask; - ring->buf[i].len = skb->len; - ring->buf[i].skb = skb; - - netdev_sent_queue(dev, skb->len); - - skb_tx_timestamp(skb); - - desc->ctrl &= ~DESC_EMPTY; - ring->curr += n; - - /* flush descriptor */ - wmb(); - - ring_min = 2; - if (ring->desc_split) - ring_min *= AG71XX_TX_RING_DS_PER_PKT; - - if (ring->curr - ring->dirty >= ring_size - ring_min) { - DBG("%s: tx queue full\n", dev->name); - netif_stop_queue(dev); - } - - DBG("%s: packet injected into TX queue\n", ag->dev->name); - - /* enable TX engine */ - ag71xx_wr(ag, AG71XX_REG_TX_CTRL, TX_CTRL_TXE); - - return NETDEV_TX_OK; - -err_drop_unmap: - dma_unmap_single(&dev->dev, dma_addr, skb->len, DMA_TO_DEVICE); - -err_drop: - dev->stats.tx_dropped++; - - dev_kfree_skb(skb); - return NETDEV_TX_OK; -} - -static int ag71xx_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - struct ag71xx *ag = netdev_priv(dev); - int ret; - - switch (cmd) { - case SIOCETHTOOL: - if (ag->phy_dev == NULL) - break; - - spin_lock_irq(&ag->lock); - ret = phy_ethtool_ioctl(ag->phy_dev, (void *) ifr->ifr_data); - spin_unlock_irq(&ag->lock); - return ret; - - case SIOCSIFHWADDR: - if (copy_from_user - (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr))) - return -EFAULT; - return 0; - - case SIOCGIFHWADDR: - if (copy_to_user - (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr))) - return -EFAULT; - return 0; - - case SIOCGMIIPHY: - case SIOCGMIIREG: - case SIOCSMIIREG: - if (ag->phy_dev == NULL) - break; - - return phy_mii_ioctl(ag->phy_dev, ifr, cmd); - - default: - break; - } - - return -EOPNOTSUPP; -} - -static void ag71xx_oom_timer_handler(unsigned long data) -{ - struct net_device *dev = (struct net_device *) data; - struct ag71xx *ag = netdev_priv(dev); - - napi_schedule(&ag->napi); -} - -static void ag71xx_tx_timeout(struct net_device *dev) -{ - struct ag71xx *ag = netdev_priv(dev); - - if (netif_msg_tx_err(ag)) - pr_info("%s: tx timeout\n", ag->dev->name); - - schedule_delayed_work(&ag->restart_work, 1); -} - -static void ag71xx_restart_work_func(struct work_struct *work) -{ - struct ag71xx *ag = container_of(work, struct ag71xx, restart_work.work); - - rtnl_lock(); - ag71xx_hw_disable(ag); - ag71xx_hw_enable(ag); - if (ag->link) - __ag71xx_link_adjust(ag, false); - rtnl_unlock(); -} - -static bool ag71xx_check_dma_stuck(struct ag71xx *ag) -{ - unsigned long timestamp; - u32 rx_sm, tx_sm, rx_fd; - - timestamp = netdev_get_tx_queue(ag->dev, 0)->trans_start; - if (likely(time_before(jiffies, timestamp + HZ/10))) - return false; - - if (!netif_carrier_ok(ag->dev)) - return false; - - rx_sm = ag71xx_rr(ag, AG71XX_REG_RX_SM); - if ((rx_sm & 0x7) == 0x3 && ((rx_sm >> 4) & 0x7) == 0x6) - return true; - - tx_sm = ag71xx_rr(ag, AG71XX_REG_TX_SM); - rx_fd = ag71xx_rr(ag, AG71XX_REG_FIFO_DEPTH); - if (((tx_sm >> 4) & 0x7) == 0 && ((rx_sm & 0x7) == 0) && - ((rx_sm >> 4) & 0x7) == 0 && rx_fd == 0) - return true; - - return false; -} - -static int ag71xx_tx_packets(struct ag71xx *ag, bool flush) -{ - struct ag71xx_ring *ring = &ag->tx_ring; - bool dma_stuck = false; - int ring_mask = BIT(ring->order) - 1; - int ring_size = BIT(ring->order); - int sent = 0; - int bytes_compl = 0; - int n = 0; - - DBG("%s: processing TX ring\n", ag->dev->name); - - while (ring->dirty + n != ring->curr) { - unsigned int i = (ring->dirty + n) & ring_mask; - struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i); - struct sk_buff *skb = ring->buf[i].skb; - - if (!flush && !ag71xx_desc_empty(desc)) { - if (ag->tx_hang_workaround && - ag71xx_check_dma_stuck(ag)) { - schedule_delayed_work(&ag->restart_work, HZ / 2); - dma_stuck = true; - } - break; - } - - if (flush) - desc->ctrl |= DESC_EMPTY; - - n++; - if (!skb) - continue; - - dev_kfree_skb_any(skb); - ring->buf[i].skb = NULL; - - bytes_compl += ring->buf[i].len; - - sent++; - ring->dirty += n; - - while (n > 0) { - ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS); - n--; - } - } - - DBG("%s: %d packets sent out\n", ag->dev->name, sent); - - if (!sent) - return 0; - - ag->dev->stats.tx_bytes += bytes_compl; - ag->dev->stats.tx_packets += sent; - - netdev_completed_queue(ag->dev, sent, bytes_compl); - if ((ring->curr - ring->dirty) < (ring_size * 3) / 4) - netif_wake_queue(ag->dev); - - if (!dma_stuck) - cancel_delayed_work(&ag->restart_work); - - return sent; -} - -static int ag71xx_rx_packets(struct ag71xx *ag, int limit) -{ - struct net_device *dev = ag->dev; - struct ag71xx_ring *ring = &ag->rx_ring; - unsigned int pktlen_mask = ag->desc_pktlen_mask; - unsigned int offset = ag->rx_buf_offset; - int ring_mask = BIT(ring->order) - 1; - int ring_size = BIT(ring->order); - struct sk_buff_head queue; - struct sk_buff *skb; - int done = 0; - - DBG("%s: rx packets, limit=%d, curr=%u, dirty=%u\n", - dev->name, limit, ring->curr, ring->dirty); - - skb_queue_head_init(&queue); - - while (done < limit) { - unsigned int i = ring->curr & ring_mask; - struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i); - int pktlen; - int err = 0; - - if (ag71xx_desc_empty(desc)) - break; - - if ((ring->dirty + ring_size) == ring->curr) { - ag71xx_assert(0); - break; - } - - ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR); - - pktlen = desc->ctrl & pktlen_mask; - pktlen -= ETH_FCS_LEN; - - dma_unmap_single(&dev->dev, ring->buf[i].dma_addr, - ag->rx_buf_size, DMA_FROM_DEVICE); - - dev->stats.rx_packets++; - dev->stats.rx_bytes += pktlen; - - skb = build_skb(ring->buf[i].rx_buf, ag71xx_buffer_size(ag)); - if (!skb) { - skb_free_frag(ring->buf[i].rx_buf); - goto next; - } - - skb_reserve(skb, offset); - skb_put(skb, pktlen); - - if (err) { - dev->stats.rx_dropped++; - kfree_skb(skb); - } else { - skb->dev = dev; - skb->ip_summed = CHECKSUM_NONE; - __skb_queue_tail(&queue, skb); - } - -next: - ring->buf[i].rx_buf = NULL; - done++; - - ring->curr++; - } - - ag71xx_ring_rx_refill(ag); - - while ((skb = __skb_dequeue(&queue)) != NULL) { - skb->protocol = eth_type_trans(skb, dev); - netif_receive_skb(skb); - } - - DBG("%s: rx finish, curr=%u, dirty=%u, done=%d\n", - dev->name, ring->curr, ring->dirty, done); - - return done; -} - -static int ag71xx_poll(struct napi_struct *napi, int limit) -{ - struct ag71xx *ag = container_of(napi, struct ag71xx, napi); - struct net_device *dev = ag->dev; - struct ag71xx_ring *rx_ring = &ag->rx_ring; - int rx_ring_size = BIT(rx_ring->order); - unsigned long flags; - u32 status; - int tx_done; - int rx_done; - - tx_done = ag71xx_tx_packets(ag, false); - - DBG("%s: processing RX ring\n", dev->name); - rx_done = ag71xx_rx_packets(ag, limit); - - ag71xx_debugfs_update_napi_stats(ag, rx_done, tx_done); - - if (rx_ring->buf[rx_ring->dirty % rx_ring_size].rx_buf == NULL) - goto oom; - - status = ag71xx_rr(ag, AG71XX_REG_RX_STATUS); - if (unlikely(status & RX_STATUS_OF)) { - ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_OF); - dev->stats.rx_fifo_errors++; - - /* restart RX */ - ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE); - } - - if (rx_done < limit) { - if (status & RX_STATUS_PR) - goto more; - - status = ag71xx_rr(ag, AG71XX_REG_TX_STATUS); - if (status & TX_STATUS_PS) - goto more; - - DBG("%s: disable polling mode, rx=%d, tx=%d,limit=%d\n", - dev->name, rx_done, tx_done, limit); - - napi_complete(napi); - - /* enable interrupts */ - spin_lock_irqsave(&ag->lock, flags); - ag71xx_int_enable(ag, AG71XX_INT_POLL); - spin_unlock_irqrestore(&ag->lock, flags); - return rx_done; - } - -more: - DBG("%s: stay in polling mode, rx=%d, tx=%d, limit=%d\n", - dev->name, rx_done, tx_done, limit); - return limit; - -oom: - if (netif_msg_rx_err(ag)) - pr_info("%s: out of memory\n", dev->name); - - mod_timer(&ag->oom_timer, jiffies + AG71XX_OOM_REFILL); - napi_complete(napi); - return 0; -} - -static irqreturn_t ag71xx_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct ag71xx *ag = netdev_priv(dev); - u32 status; - - status = ag71xx_rr(ag, AG71XX_REG_INT_STATUS); - ag71xx_dump_intr(ag, "raw", status); - - if (unlikely(!status)) - return IRQ_NONE; - - if (unlikely(status & AG71XX_INT_ERR)) { - if (status & AG71XX_INT_TX_BE) { - ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE); - dev_err(&dev->dev, "TX BUS error\n"); - } - if (status & AG71XX_INT_RX_BE) { - ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE); - dev_err(&dev->dev, "RX BUS error\n"); - } - } - - if (likely(status & AG71XX_INT_POLL)) { - ag71xx_int_disable(ag, AG71XX_INT_POLL); - DBG("%s: enable polling mode\n", dev->name); - napi_schedule(&ag->napi); - } - - ag71xx_debugfs_update_int_stats(ag, status); - - return IRQ_HANDLED; -} - -#ifdef CONFIG_NET_POLL_CONTROLLER -/* - * Polling 'interrupt' - used by things like netconsole to send skbs - * without having to re-enable interrupts. It's not called while - * the interrupt routine is executing. - */ -static void ag71xx_netpoll(struct net_device *dev) -{ - disable_irq(dev->irq); - ag71xx_interrupt(dev->irq, dev); - enable_irq(dev->irq); -} -#endif - -static int ag71xx_change_mtu(struct net_device *dev, int new_mtu) -{ - struct ag71xx *ag = netdev_priv(dev); - - dev->mtu = new_mtu; - ag71xx_wr(ag, AG71XX_REG_MAC_MFL, - ag71xx_max_frame_len(dev->mtu)); - - return 0; -} - -static const struct net_device_ops ag71xx_netdev_ops = { - .ndo_open = ag71xx_open, - .ndo_stop = ag71xx_stop, - .ndo_start_xmit = ag71xx_hard_start_xmit, - .ndo_do_ioctl = ag71xx_do_ioctl, - .ndo_tx_timeout = ag71xx_tx_timeout, - .ndo_change_mtu = ag71xx_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = ag71xx_netpoll, -#endif -}; - -static const char *ag71xx_get_phy_if_mode_name(phy_interface_t mode) -{ - switch (mode) { - case PHY_INTERFACE_MODE_MII: - return "MII"; - case PHY_INTERFACE_MODE_GMII: - return "GMII"; - case PHY_INTERFACE_MODE_RMII: - return "RMII"; - case PHY_INTERFACE_MODE_RGMII: - return "RGMII"; - case PHY_INTERFACE_MODE_SGMII: - return "SGMII"; - default: - break; - } - - return "unknown"; -} - -static void ag71xx_of_bit(struct device_node *np, const char *prop, - u32 *reg, u32 mask) -{ - u32 val; - - if (of_property_read_u32(np, prop, &val)) - return; - - if (val) - *reg |= mask; - else - *reg &= ~mask; -} - -static void ag71xx_setup_gmac_933x(struct device_node *np, void __iomem *base) -{ - u32 val = __raw_readl(base + AR933X_GMAC_REG_ETH_CFG); - - ag71xx_of_bit(np, "switch-phy-swap", &val, AR933X_ETH_CFG_SW_PHY_SWAP); - ag71xx_of_bit(np, "switch-phy-addr-swap", &val, - AR933X_ETH_CFG_SW_PHY_ADDR_SWAP); - - __raw_writel(val, base + AR933X_GMAC_REG_ETH_CFG); -} - -static int ag71xx_setup_gmac(struct device_node *np) -{ - struct device_node *np_dev; - void __iomem *base; - int err = 0; - - np = of_get_child_by_name(np, "gmac-config"); - if (!np) - return 0; - - np_dev = of_parse_phandle(np, "device", 0); - if (!np_dev) - goto out; - - base = of_iomap(np_dev, 0); - if (!base) { - pr_err("%pOF: can't map GMAC registers\n", np_dev); - err = -ENOMEM; - goto err_iomap; - } - - if (of_device_is_compatible(np_dev, "qca,ar9330-gmac")) - ag71xx_setup_gmac_933x(np, base); - - iounmap(base); - -err_iomap: - of_node_put(np_dev); -out: - of_node_put(np); - return err; -} - -static int ag71xx_probe(struct platform_device *pdev) -{ - struct device_node *np = pdev->dev.of_node; - struct net_device *dev; - struct resource *res; - struct ag71xx *ag; - const void *mac_addr; - u32 max_frame_len; - int tx_size, err; - - if (!np) - return -ENODEV; - - dev = alloc_etherdev(sizeof(*ag)); - if (!dev) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -EINVAL; - - err = ag71xx_setup_gmac(np); - if (err) - return err; - - SET_NETDEV_DEV(dev, &pdev->dev); - - ag = netdev_priv(dev); - ag->pdev = pdev; - ag->dev = dev; - ag->msg_enable = netif_msg_init(ag71xx_msg_level, - AG71XX_DEFAULT_MSG_ENABLE); - spin_lock_init(&ag->lock); - - ag->mac_reset = devm_reset_control_get(&pdev->dev, "mac"); - if (IS_ERR(ag->mac_reset)) { - dev_err(&pdev->dev, "missing mac reset\n"); - err = PTR_ERR(ag->mac_reset); - goto err_free; - } - - ag->phy_reset = devm_reset_control_get_optional(&pdev->dev, "phy"); - - if (of_property_read_u32_array(np, "fifo-data", ag->fifodata, 3)) { - if (of_device_is_compatible(np, "qca,ar9130-eth") || - of_device_is_compatible(np, "qca,ar7100-eth")) { - ag->fifodata[0] = 0x0fff0000; - ag->fifodata[1] = 0x00001fff; - } else { - ag->fifodata[0] = 0x0010ffff; - ag->fifodata[1] = 0x015500aa; - ag->fifodata[2] = 0x01f00140; - } - if (of_device_is_compatible(np, "qca,ar9130-eth")) - ag->fifodata[2] = 0x00780fff; - else if (of_device_is_compatible(np, "qca,ar7100-eth")) - ag->fifodata[2] = 0x008001ff; - } - - if (of_property_read_u32_array(np, "pll-data", ag->plldata, 3)) - dev_dbg(&pdev->dev, "failed to read pll-data property\n"); - - if (of_property_read_u32_array(np, "pll-reg", ag->pllreg, 3)) - dev_dbg(&pdev->dev, "failed to read pll-reg property\n"); - - ag->pllregmap = syscon_regmap_lookup_by_phandle(np, "pll-handle"); - if (IS_ERR(ag->pllregmap)) { - dev_dbg(&pdev->dev, "failed to read pll-handle property\n"); - ag->pllregmap = NULL; - } - - ag->mac_base = devm_ioremap_nocache(&pdev->dev, res->start, - res->end - res->start + 1); - if (!ag->mac_base) { - err = -ENOMEM; - goto err_free; - } - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (res) { - ag->mii_base = devm_ioremap_nocache(&pdev->dev, res->start, - res->end - res->start + 1); - if (!ag->mii_base) { - err = -ENOMEM; - goto err_free; - } - } - - dev->irq = platform_get_irq(pdev, 0); - err = devm_request_irq(&pdev->dev, dev->irq, ag71xx_interrupt, - 0x0, dev_name(&pdev->dev), dev); - if (err) { - dev_err(&pdev->dev, "unable to request IRQ %d\n", dev->irq); - goto err_free; - } - - dev->netdev_ops = &ag71xx_netdev_ops; - dev->ethtool_ops = &ag71xx_ethtool_ops; - - INIT_DELAYED_WORK(&ag->restart_work, ag71xx_restart_work_func); - - init_timer(&ag->oom_timer); - ag->oom_timer.data = (unsigned long) dev; - ag->oom_timer.function = ag71xx_oom_timer_handler; - - tx_size = AG71XX_TX_RING_SIZE_DEFAULT; - ag->rx_ring.order = ag71xx_ring_size_order(AG71XX_RX_RING_SIZE_DEFAULT); - - if (of_device_is_compatible(np, "qca,ar9340-eth") || - of_device_is_compatible(np, "qca,qca9530-eth") || - of_device_is_compatible(np, "qca,qca9550-eth") || - of_device_is_compatible(np, "qca,qca9560-eth")) - ag->desc_pktlen_mask = SZ_16K - 1; - else - ag->desc_pktlen_mask = SZ_4K - 1; - - if (ag->desc_pktlen_mask == SZ_16K - 1 && - !of_device_is_compatible(np, "qca,qca9550-eth") && - !of_device_is_compatible(np, "qca,qca9560-eth")) - max_frame_len = ag->desc_pktlen_mask; - else - max_frame_len = 1540; - - dev->min_mtu = 68; - dev->max_mtu = max_frame_len - ag71xx_max_frame_len(0); - - if (of_device_is_compatible(np, "qca,ar7240-eth")) - ag->tx_hang_workaround = 1; - - ag->rx_buf_offset = NET_SKB_PAD; - if (!of_device_is_compatible(np, "qca,ar7100-eth") && - !of_device_is_compatible(np, "qca,ar9130-eth")) - ag->rx_buf_offset += NET_IP_ALIGN; - - if (of_device_is_compatible(np, "qca,ar7100-eth")) { - ag->tx_ring.desc_split = AG71XX_TX_RING_SPLIT; - tx_size *= AG71XX_TX_RING_DS_PER_PKT; - } - ag->tx_ring.order = ag71xx_ring_size_order(tx_size); - - ag->stop_desc = dmam_alloc_coherent(&pdev->dev, - sizeof(struct ag71xx_desc), - &ag->stop_desc_dma, GFP_KERNEL); - if (!ag->stop_desc) - goto err_free; - - ag->stop_desc->data = 0; - ag->stop_desc->ctrl = 0; - ag->stop_desc->next = (u32) ag->stop_desc_dma; - - mac_addr = of_get_mac_address(np); - if (mac_addr) - memcpy(dev->dev_addr, mac_addr, ETH_ALEN); - if (!mac_addr || !is_valid_ether_addr(dev->dev_addr)) { - dev_err(&pdev->dev, "invalid MAC address, using random address\n"); - eth_random_addr(dev->dev_addr); - } - - ag->phy_if_mode = of_get_phy_mode(np); - if (ag->phy_if_mode < 0) { - dev_err(&pdev->dev, "missing phy-mode property in DT\n"); - err = ag->phy_if_mode; - goto err_free; - } - - netif_napi_add(dev, &ag->napi, ag71xx_poll, AG71XX_NAPI_WEIGHT); - - ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, 0); - ag71xx_hw_init(ag); - ag71xx_mdio_init(ag); - - err = ag71xx_phy_connect(ag); - if (err) - goto err_mdio_free; - - err = ag71xx_debugfs_init(ag); - if (err) - goto err_phy_disconnect; - - platform_set_drvdata(pdev, dev); - - err = register_netdev(dev); - if (err) { - dev_err(&pdev->dev, "unable to register net device\n"); - platform_set_drvdata(pdev, NULL); - ag71xx_debugfs_exit(ag); - goto err_phy_disconnect; - } - - pr_info("%s: Atheros AG71xx at 0x%08lx, irq %d, mode:%s\n", - dev->name, (unsigned long) ag->mac_base, dev->irq, - ag71xx_get_phy_if_mode_name(ag->phy_if_mode)); - - return 0; - -err_phy_disconnect: - ag71xx_phy_disconnect(ag); -err_mdio_free: - ag71xx_mdio_cleanup(ag); -err_free: - free_netdev(dev); - return err; -} - -static int ag71xx_remove(struct platform_device *pdev) -{ - struct net_device *dev = platform_get_drvdata(pdev); - struct ag71xx *ag; - - if (!dev) - return 0; - - ag = netdev_priv(dev); - ag71xx_debugfs_exit(ag); - ag71xx_phy_disconnect(ag); - ag71xx_mdio_cleanup(ag); - unregister_netdev(dev); - free_irq(dev->irq, dev); - iounmap(ag->mac_base); - kfree(dev); - platform_set_drvdata(pdev, NULL); - - return 0; -} - -static const struct of_device_id ag71xx_match[] = { - { .compatible = "qca,ar7100-eth" }, - { .compatible = "qca,ar7240-eth" }, - { .compatible = "qca,ar7241-eth" }, - { .compatible = "qca,ar7242-eth" }, - { .compatible = "qca,ar9130-eth" }, - { .compatible = "qca,ar9330-eth" }, - { .compatible = "qca,ar9340-eth" }, - { .compatible = "qca,qca9530-eth" }, - { .compatible = "qca,qca9550-eth" }, - { .compatible = "qca,qca9560-eth" }, - {} -}; - -static struct platform_driver ag71xx_driver = { - .probe = ag71xx_probe, - .remove = ag71xx_remove, - .driver = { - .name = AG71XX_DRV_NAME, - .of_match_table = ag71xx_match, - } -}; - -static int __init ag71xx_module_init(void) -{ - int ret; - - ret = ag71xx_debugfs_root_init(); - if (ret) - goto err_out; - - ret = platform_driver_register(&ag71xx_driver); - if (ret) - goto err_debugfs_exit; - - return 0; - -err_debugfs_exit: - ag71xx_debugfs_root_exit(); -err_out: - return ret; -} - -static void __exit ag71xx_module_exit(void) -{ - platform_driver_unregister(&ag71xx_driver); - ag71xx_debugfs_root_exit(); -} - -module_init(ag71xx_module_init); -module_exit(ag71xx_module_exit); - -MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); -MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>"); -MODULE_AUTHOR("Felix Fietkau <nbd@nbd.name>"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:" AG71XX_DRV_NAME); diff --git a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c deleted file mode 100644 index 8c1572b..0000000 --- a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c +++ /dev/null @@ -1,218 +0,0 @@ -/* - * Atheros AR71xx built-in ethernet mac driver - * - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Based on Atheros' AG7100 driver - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/clk.h> -#include <linux/of_mdio.h> -#include "ag71xx.h" - -#define AG71XX_MDIO_RETRY 1000 -#define AG71XX_MDIO_DELAY 5 - -static int bus_count; - -static int ag71xx_mdio_wait_busy(struct ag71xx *ag) -{ - int i; - - for (i = 0; i < AG71XX_MDIO_RETRY; i++) { - u32 busy; - - udelay(AG71XX_MDIO_DELAY); - - regmap_read(ag->mii_regmap, AG71XX_REG_MII_IND, &busy); - if (!busy) - return 0; - - udelay(AG71XX_MDIO_DELAY); - } - - pr_err("%s: MDIO operation timed out\n", ag->mii_bus->name); - - return -ETIMEDOUT; -} - -int ag71xx_mdio_mii_read(struct mii_bus *bus, int addr, int reg) -{ - struct ag71xx *ag = bus->priv; - int err; - int ret; - - err = ag71xx_mdio_wait_busy(ag); - if (err) - return 0xffff; - - regmap_write(ag->mii_regmap, AG71XX_REG_MII_CMD, MII_CMD_WRITE); - regmap_write(ag->mii_regmap, AG71XX_REG_MII_ADDR, - ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff)); - regmap_write(ag->mii_regmap, AG71XX_REG_MII_CMD, MII_CMD_READ); - - err = ag71xx_mdio_wait_busy(ag); - if (err) - return 0xffff; - - regmap_read(ag->mii_regmap, AG71XX_REG_MII_STATUS, &ret); - ret &= 0xffff; - regmap_write(ag->mii_regmap, AG71XX_REG_MII_CMD, MII_CMD_WRITE); - - DBG("mii_read: addr=%04x, reg=%04x, value=%04x\n", addr, reg, ret); - - return ret; -} - -int ag71xx_mdio_mii_write(struct mii_bus *bus, int addr, int reg, u16 val) -{ - struct ag71xx *ag = bus->priv; - - DBG("mii_write: addr=%04x, reg=%04x, value=%04x\n", addr, reg, val); - - regmap_write(ag->mii_regmap, AG71XX_REG_MII_ADDR, - ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff)); - regmap_write(ag->mii_regmap, AG71XX_REG_MII_CTRL, val); - - ag71xx_mdio_wait_busy(ag); - - return 0; -} - -static int ar934x_mdio_clock_div(unsigned int rate) -{ - if (rate == 100 * 1000 * 1000) - return 6; /* 100 MHz clock divided by 20 => 5 MHz */ - else if (rate == 25 * 1000 * 1000) - return 0; /* 25 MHz clock divided by 4 => 6.25 MHz */ - else - return 3; /* 40 MHz clock divided by 8 => 5 MHz */ -} - -static int ag71xx_mdio_reset(struct mii_bus *bus) -{ - struct device_node *np = bus->dev.of_node; - struct ag71xx *ag = bus->priv; - struct device_node *np_ag = ag->pdev->dev.of_node; - bool builtin_switch; - u32 t; - - builtin_switch = of_property_read_bool(np, "builtin-switch"); - - if (of_device_is_compatible(np_ag, "qca,ar7240-eth")) - t = MII_CFG_CLK_DIV_6; - else if (of_device_is_compatible(np_ag, "qca,ar9340-eth")) - t = MII_CFG_CLK_DIV_58; - else if (builtin_switch) - t = MII_CFG_CLK_DIV_10; - else - t = MII_CFG_CLK_DIV_28; - - if (builtin_switch && of_device_is_compatible(np_ag, "qca,ar9340-eth")) { - struct clk *ref_clk = of_clk_get(np, 0); - int clock_rate; - - if (WARN_ON_ONCE(!ref_clk)) - clock_rate = 40 * 1000 * 1000; - else - clock_rate = clk_get_rate(ref_clk); - - t = ar934x_mdio_clock_div(clock_rate); - clk_put(ref_clk); - } - - regmap_write(ag->mii_regmap, AG71XX_REG_MII_CFG, t | MII_CFG_RESET); - udelay(100); - - regmap_write(ag->mii_regmap, AG71XX_REG_MII_CFG, t); - udelay(100); - - return 0; -} - -int ag71xx_mdio_init(struct ag71xx *ag) -{ - struct device *parent = &ag->pdev->dev; - struct device_node *np; - struct mii_bus *mii_bus; - bool builtin_switch; - int i, err; - - np = of_get_child_by_name(parent->of_node, "mdio-bus"); - if (!np) - return -ENODEV; - - if (!of_device_is_available(np)) { - err = 0; - goto err_out; - } - - ag->mii_regmap = syscon_regmap_lookup_by_phandle(np, "regmap"); - if (!ag->mii_regmap) - return -ENOENT; - - mii_bus = devm_mdiobus_alloc(parent); - if (!mii_bus) { - err = -ENOMEM; - goto err_out; - } - - ag->mdio_reset = of_reset_control_get_exclusive(np, "mdio"); - builtin_switch = of_property_read_bool(np, "builtin-switch"); - - mii_bus->name = "mdio"; - if (builtin_switch) { - mii_bus->read = ar7240sw_phy_read; - mii_bus->write = ar7240sw_phy_write; - } else { - mii_bus->read = ag71xx_mdio_mii_read; - mii_bus->write = ag71xx_mdio_mii_write; - } - mii_bus->reset = ag71xx_mdio_reset; - mii_bus->priv = ag; - mii_bus->parent = parent; - snprintf(mii_bus->id, MII_BUS_ID_SIZE, "%s.%d", np->name, bus_count++); - - if (!builtin_switch && - of_property_read_u32(np, "phy-mask", &mii_bus->phy_mask)) - mii_bus->phy_mask = 0; - - for (i = 0; i < PHY_MAX_ADDR; i++) - mii_bus->irq[i] = PHY_POLL; - - if (!IS_ERR(ag->mdio_reset)) { - reset_control_assert(ag->mdio_reset); - msleep(100); - reset_control_deassert(ag->mdio_reset); - msleep(200); - } - - err = of_mdiobus_register(mii_bus, np); - if (err) - goto err_out; - - ag->mii_bus = mii_bus; - - if (builtin_switch) - ag71xx_ar7240_init(ag, np); - - return 0; - -err_out: - of_node_put(np); - return err; -} - -void ag71xx_mdio_cleanup(struct ag71xx *ag) -{ - if (!ag->mii_bus) - return; - - ag71xx_ar7240_cleanup(ag); - mdiobus_unregister(ag->mii_bus); -} diff --git a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c deleted file mode 100644 index f9df38d..0000000 --- a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * Atheros AR71xx built-in ethernet mac driver - * - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Based on Atheros' AG7100 driver - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/of_mdio.h> -#include "ag71xx.h" - -static void ag71xx_phy_link_adjust(struct net_device *dev) -{ - struct ag71xx *ag = netdev_priv(dev); - struct phy_device *phydev = ag->phy_dev; - unsigned long flags; - int status_change = 0; - - spin_lock_irqsave(&ag->lock, flags); - - if (phydev->link) { - if (ag->duplex != phydev->duplex - || ag->speed != phydev->speed) { - status_change = 1; - } - } - - if (phydev->link != ag->link) - status_change = 1; - - ag->link = phydev->link; - ag->duplex = phydev->duplex; - ag->speed = phydev->speed; - - if (status_change) - ag71xx_link_adjust(ag); - - spin_unlock_irqrestore(&ag->lock, flags); -} - -int ag71xx_phy_connect(struct ag71xx *ag) -{ - struct device_node *np = ag->pdev->dev.of_node; - struct device_node *phy_node; - int ret; - - if (of_phy_is_fixed_link(np)) { - ret = of_phy_register_fixed_link(np); - if (ret < 0) { - dev_err(&ag->pdev->dev, - "Failed to register fixed PHY link: %d\n", ret); - return ret; - } - - phy_node = of_node_get(np); - } else { - phy_node = of_parse_phandle(np, "phy-handle", 0); - } - - if (!phy_node) { - dev_err(&ag->pdev->dev, - "Could not find valid phy node\n"); - return -ENODEV; - } - - ag->phy_dev = of_phy_connect(ag->dev, phy_node, ag71xx_phy_link_adjust, - 0, ag->phy_if_mode); - - of_node_put(phy_node); - - if (!ag->phy_dev) { - dev_err(&ag->pdev->dev, - "Could not connect to PHY device\n"); - return -ENODEV; - } - - dev_info(&ag->pdev->dev, "connected to PHY at %s [uid=%08x, driver=%s]\n", - phydev_name(ag->phy_dev), - ag->phy_dev->phy_id, ag->phy_dev->drv->name); - - return 0; -} - -void ag71xx_phy_disconnect(struct ag71xx *ag) -{ - phy_disconnect(ag->phy_dev); -} diff --git a/target/linux/ath79/generic/config-default b/target/linux/ath79/generic/config-default deleted file mode 100644 index bbed97b..0000000 --- a/target/linux/ath79/generic/config-default +++ /dev/null @@ -1,16 +0,0 @@ -CONFIG_BLK_MQ_PCI=y -CONFIG_HW_HAS_PCI=y -CONFIG_LEDS_RESET=y -# CONFIG_MIPS_MACHINE is not set -CONFIG_OF_ADDRESS_PCI=y -CONFIG_OF_PCI=y -CONFIG_OF_PCI_IRQ=y -CONFIG_PCI=y -CONFIG_PCI_AR71XX=y -CONFIG_PCI_AR724X=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PHY_AR7100_USB=y -CONFIG_PHY_AR7200_USB=y -# CONFIG_WIRELESS is not set -# CONFIG_WLAN is not set diff --git a/target/linux/ath79/generic/profiles/00-default.mk b/target/linux/ath79/generic/profiles/00-default.mk deleted file mode 100644 index 83b39e4..0000000 --- a/target/linux/ath79/generic/profiles/00-default.mk +++ /dev/null @@ -1,16 +0,0 @@ -# -# Copyright (C) 2009 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -define Profile/Default - NAME:=Default Profile (all drivers) - PRIORITY := 1 -endef - -define Profile/Default/Description - Default package set compatible with most boards. -endef -$(eval $(call Profile,Default)) diff --git a/target/linux/ath79/generic/target.mk b/target/linux/ath79/generic/target.mk deleted file mode 100644 index 64eb205..0000000 --- a/target/linux/ath79/generic/target.mk +++ /dev/null @@ -1,8 +0,0 @@ -BOARDNAME:=Generic -FEATURES += squashfs - -define Target/Description - Build firmware images for generic Atheros AR71xx/AR913x/AR934x based boards. -endef - - diff --git a/target/linux/ath79/image/Makefile b/target/linux/ath79/image/Makefile deleted file mode 100644 index cc71c31..0000000 --- a/target/linux/ath79/image/Makefile +++ /dev/null @@ -1,79 +0,0 @@ -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -KERNEL_LOADADDR = 0x80060000 - -DEVICE_VARS += CMDLINE CONSOLE IMAGE_SIZE BOARDNAME LOADER_FLASH_OFFS LOADER_TYPE ATH_SOC - -define Build/loader-common - rm -rf $@.src - $(MAKE) -C lzma-loader \ - PKG_BUILD_DIR="$@.src" \ - TARGET_DIR="$(dir $@)" LOADER_NAME="$(notdir $@)" \ - BOARD="$(BOARDNAME)" \ - LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \ - $(1) compile loader.$(LOADER_TYPE) - mv "$@.$(LOADER_TYPE)" "$@" - rm -rf $@.src -endef - -define Build/loader-kernel - $(call Build/loader-common,LOADER_DATA="$@") -endef - -define Build/loader-kernel-cmdline - $(call Build/loader-common,LOADER_DATA="$@" KERNEL_CMDLINE="$(CMDLINE)") -endef - - -define Build/loader-okli-compile - $(call Build/loader-common,FLASH_OFFS=$(LOADER_FLASH_OFFS) FLASH_MAX=0 KERNEL_CMDLINE="$(CMDLINE)") -endef - -define Build/loader-okli - dd if=$(KDIR)/loader-$(1).gz bs=7680 conv=sync of="$@.new" - cat "$@" >> "$@.new" - mv "$@.new" "$@" -endef - -define Build/relocate-kernel - rm -rf $@.relocate - $(CP) ../../generic/image/relocate $@.relocate - $(MAKE) -j1 -C $@.relocate KERNEL_ADDR=$(KERNEL_LOADADDR) CROSS_COMPILE=$(TARGET_CROSS) - ( \ - dd if=$@.relocate/loader.bin bs=32 conv=sync && \ - perl -e '@s = stat("$@"); print pack("N", @s[7])' && \ - cat "$@" \ - ) > "$@.new" - mv "$@.new" "$@" - rm -rf $@.relocate -endef - -define Build/copy-file - cat "$(1)" > "$@" -endef - -define Device/Default - ATH_SOC := - BOARDNAME := - DEVICE_PROFILE = $$(BOARDNAME) - DEVICE_DTS_DIR := ../dts - DEVICE_DTS = $$(ATH_SOC)_$(1) - PROFILES = Default Minimal $$(DEVICE_PROFILE) - MTDPARTS := - BLOCKSIZE := 64k - CONSOLE = ttyS0,115200 - CMDLINE = $$(if $$(BOARDNAME),board=$$(BOARDNAME)) $$(if $$(MTDPARTS),mtdparts=$$(MTDPARTS)) $$(if $$(CONSOLE),console=$$(CONSOLE)) - KERNEL := kernel-bin | append-dtb | lzma | uImage lzma - KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma - COMPILE := - IMAGES := sysupgrade.bin - IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs -endef - -ifeq ($(SUBTARGET),generic) -include ./tp-link.mk -include ./generic.mk -include ./generic-ubnt.mk -endif -$(eval $(call BuildImage)) diff --git a/target/linux/ath79/image/generic-ubnt.mk b/target/linux/ath79/image/generic-ubnt.mk deleted file mode 100644 index 17c89fc..0000000 --- a/target/linux/ath79/image/generic-ubnt.mk +++ /dev/null @@ -1,275 +0,0 @@ -DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE - -# mkubntimage is using the kernel image direct -# routerboard creates partitions out of the ubnt header -define Build/mkubntimage - -$(STAGING_DIR_HOST)/bin/mkfwimage \ - -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \ - -k $(IMAGE_KERNEL) \ - -r $@ \ - -o $@ -endef - -# all UBNT XM device expect the kernel image to have 1024k while flash, when -# booting the image, the size doesn't matter. -define Build/mkubntimage-split - -[ -f $@ ] && ( \ - dd if=$@ of=$@.old1 bs=1024k count=1; \ - dd if=$@ of=$@.old2 bs=1024k skip=1; \ - $(STAGING_DIR_HOST)/bin/mkfwimage \ - -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \ - -k $@.old1 \ - -r $@.old2 \ - -o $@; \ - rm $@.old1 $@.old2 ) -endef - -define Build/mkubntimage2 - -$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \ - -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \ - -p jffs2:0x50000:0xf60000:0:0:$@ \ - -o $@.new - @mv $@.new $@ -endef - - -# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM) -# UBNT_TYPE e.g. one of (BZ, XM, XW) -# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x) -define Device/ubnt - DEVICE_PACKAGES := kmod-usb-core kmod-usb2 - DEVICE_PROFILE := UBNT - IMAGE_SIZE := 7552k - UBNT_BOARD := XM - IMAGES := sysupgrade.bin factory.bin - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) - IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split -endef - -define Device/ubnt-xm - $(Device/ubnt) - DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ohci - UBNT_TYPE := XM - UBNT_CHIP := ar7240 - ATH_SOC := ar7241 - KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | uImage lzma -endef - -define Device/ubnt-xw - $(Device/ubnt) - UBNT_TYPE := XW - UBNT_CHIP := ar934x -endef - -define Device/ubnt-bz - $(Device/ubnt) - UBNT_TYPE := BZ - UBNT_CHIP := ar7240 -endef - -define Device/rw2458n - $(Device/ubnt-xm) - DEVICE_TITLE := Ubiquiti RW2458N - BOARDNAME := RW2458N -endef -#TARGET_DEVICES += rw2458n - -define Device/ubnt-airrouter - $(Device/ubnt-xm) - DEVICE_TITLE := Ubiquiti AirRouter - BOARDNAME := UBNT-AR -endef -#TARGET_DEVICES += ubnt-airrouter - -define Device/ubnt-bullet-m - $(Device/ubnt-xm) - DEVICE_TITLE := Ubiquiti Bullet-M - BOARDNAME := UBNT-BM -endef -TARGET_DEVICES += ubnt-bullet-m - -define Device/ubnt-rocket-m - $(Device/ubnt-xm) - DEVICE_TITLE := Ubiquiti Rocket-M - BOARDNAME := UBNT-RM -endef -TARGET_DEVICES += ubnt-rocket-m - -define Device/ubnt-nano-m - $(Device/ubnt-xm) - DEVICE_TITLE := Ubiquiti Nano-M - BOARDNAME := UBNT-NM -endef -TARGET_DEVICES += ubnt-nano-m - -define Device/ubnt-unifi - $(Device/ubnt-bz) - ATH_SOC := ar7241 - DEVICE_TITLE := Ubiquiti UniFi - BOARDNAME := UBNT-UF - DEVICE_PROFILE += UBNTUNIFI -endef -TARGET_DEVICES += ubnt-unifi - -define Device/ubnt-unifiac - DEVICE_PACKAGES := kmod-usb-core kmod-usb2 - DEVICE_PROFILE := UBNT - IMAGE_SIZE := 7744k - MTDPARTS := spi0.0:384k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),7744k(ubnt-airos)ro,128k(bs),256k(cfg)ro,64k(EEPROM)ro - IMAGES := sysupgrade.bin - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) -endef - -define Device/ubnt-unifiac-lite - $(Device/ubnt-unifiac) - DEVICE_TITLE := Ubiquiti UniFi AC-Lite - DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x - DEVICE_PROFILE += UBNTUNIFIACLITE - BOARDNAME := UBNT-UF-AC-LITE -endef -#TARGET_DEVICES += ubnt-unifiac-lite - -define Device/ubnt-unifiac-mesh - $(Device/ubnt-unifiac-lite) - DEVICE_TITLE := Ubiquiti UniFi AC-Mesh -endef -#TARGET_DEVICES += ubnt-unifiac-mesh - -define Device/ubnt-unifiac-pro - $(Device/ubnt-unifiac) - DEVICE_TITLE := Ubiquiti UniFi AC-Pro - DEVICE_PACKAGES += kmod-ath10k ath10k-firmware-qca988x - DEVICE_PROFILE += UBNTUNIFIACPRO - BOARDNAME := UBNT-UF-AC-PRO -endef -#TARGET_DEVICES += ubnt-unifiac-pro - -define Device/ubnt-unifi-outdoor - $(Device/ubnt-bz) - DEVICE_TITLE := Ubiquiti UniFi Outdoor - BOARDNAME := UBNT-U20 - DEVICE_PROFILE += UBNTUNIFIOUTDOOR -endef -#TARGET_DEVICES += ubnt-unifi-outdoor - -define Device/ubnt-nano-m-xw - $(Device/ubnt-xw) - DEVICE_TITLE := Ubiquiti Nano M XW - BOARDNAME := UBNT-NM-XW -endef -#TARGET_DEVICES += ubnt-nano-m-xw - -define Device/ubnt-loco-m-xw - $(Device/ubnt-xw) - DEVICE_TITLE := Ubiquiti Loco XW - BOARDNAME := UBNT-LOCO-XW -endef -#TARGET_DEVICES += ubnt-loco-m-xw - -define Device/ubnt-rocket-m-xw - $(Device/ubnt-xw) - DEVICE_TITLE := Ubiquiti Rocket M XW - BOARDNAME := UBNT-RM-XW -endef -#TARGET_DEVICES += ubnt-rocket-m-xw - -define Device/ubnt-rocket-m-ti - $(Device/ubnt-xw) - DEVICE_TITLE := Ubiquiti Rocket M TI - BOARDNAME := UBNT-RM-TI - UBNT_TYPE := TI -endef -#TARGET_DEVICES += ubnt-rocket-m-ti - -define Device/ubnt-air-gateway - $(Device/ubnt-xm) - DEVICE_TITLE := Ubiquiti Air Gateway - BOARDNAME := UBNT-AGW - UBNT_TYPE := AirGW - UBNT_CHIP := ar933x - CONSOLE := ttyATH0,115200 -endef -#TARGET_DEVICES += ubnt-air-gateway - -define Device/ubnt-air-gateway-pro - $(Device/ubnt-xm) - DEVICE_TITLE := Ubiquiti Air Gateway Pro - BOARDNAME := UBNT-AGWP - UBNT_TYPE := AirGWP - UBNT_CHIP := ar934x -endef -#TARGET_DEVICES += ubnt-air-gateway-pro - -define Device/ubdev01 - $(Device/ubnt-xm) - DEVICE_TITLE := Ubiquiti ubDEV01 - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro - BOARDNAME := UBNT-UF - UBNT_BOARD := UBDEV01 -endef -#TARGET_DEVICES += ubdev01 - -define Device/ubnt-routerstation - DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 - DEVICE_PROFILE := UBNT - IMAGE_SIZE := 16128k - IMAGES := sysupgrade.bin factory.bin - IMAGE/factory.bin := append-rootfs | pad-rootfs | mkubntimage - IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE) - KERNEL := kernel-bin | patch-cmdline | lzma | pad-to $$(BLOCKSIZE) -endef - -define Device/ubnt-rs - $(Device/ubnt-routerstation) - DEVICE_TITLE := Ubiquiti RouterStation - BOARDNAME := UBNT-RS - DEVICE_PROFILE += UBNTRS - UBNT_BOARD := RS - UBNT_TYPE := RSx - UBNT_CHIP := ar7100 -endef -#TARGET_DEVICES += ubnt-rs - -define Device/ubnt-rspro - $(Device/ubnt-routerstation) - DEVICE_TITLE := Ubiquiti RouterStation Pro - BOARDNAME := UBNT-RSPRO - DEVICE_PROFILE += UBNTRSPRO - UBNT_BOARD := RSPRO - UBNT_TYPE := RSPRO - UBNT_CHIP := ar7100pro -endef -#TARGET_DEVICES += ubnt-rspro - -define Device/ubnt-ls-sr71 - $(Device/ubnt-routerstation) - DEVICE_TITLE := Ubiquiti LS-SR71 - BOARDNAME := UBNT-LS-SR71 - UBNT_BOARD := LS-SR71 - UBNT_TYPE := LS-SR71 - UBNT_CHIP := ar7100 -endef -#TARGET_DEVICES += ubnt-ls-sr71 - -define Device/ubnt-uap-pro - DEVICE_TITLE := Ubiquiti UAP Pro - KERNEL_SIZE := 1536k - IMAGE_SIZE := 15744k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel),14208k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware) - UBNT_TYPE := BZ - UBNT_CHIP := ar934x - BOARDNAME := UAP-PRO - DEVICE_PROFILE := UBNT UAPPRO - KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 kernel0 - IMAGES := sysupgrade.bin factory.bin - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) - IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage2 -endef - -define Device/ubnt-unifi-outdoor-plus - $(Device/ubnt-uap-pro) - DEVICE_TITLE := Ubiquiti UniFi Outdoor Plus - UBNT_CHIP := ar7240 - BOARDNAME := UBNT-UOP - DEVICE_PROFILE := UBNT -endef diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk deleted file mode 100644 index dab98b7..0000000 --- a/target/linux/ath79/image/generic.mk +++ /dev/null @@ -1,93 +0,0 @@ -define Build/netgear-squashfs - rm -rf $@.fs $@.squashfs - mkdir -p $@.fs/image - cp $@ $@.fs/image/uImage - $(STAGING_DIR_HOST)/bin/mksquashfs-lzma \ - $@.fs $@.squashfs \ - -noappend -root-owned -be -b 65536 \ - $(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH)) - - dd if=/dev/zero bs=1k count=1 >> $@.squashfs - mkimage \ - -A mips -O linux -T filesystem -C none \ - -M $(NETGEAR_KERNEL_MAGIC) \ - -a 0xbf070000 -e 0xbf070000 \ - -n 'MIPS $(VERSION_DIST) Linux-$(LINUX_VERSION)' \ - -d $@.squashfs $@ - rm -rf $@.squashfs $@.fs -endef - -define Build/netgear-uImage - $(call Build/uImage,$(1) -M $(NETGEAR_KERNEL_MAGIC)) -endef - -define Device/ew_dorin - ATH_SOC := ar9331 - DEVICE_TITLE := Embedded Wireless Dorin - DEVICE_PACKAGES := kmod-usb-chipidea2 -endef - -TARGET_DEVICES += ew_dorin - -define Device/gl_ar150 - ATH_SOC := ar9330 - DEVICE_TITLE := GL.iNet GL-AR150 - DEVICE_PACKAGES := kmod-usb-chipidea2 - IMAGE_SIZE := 16000k -endef -TARGET_DEVICES += gl_ar150 - -define Device/om5p_ac - ATH_SOC := qca9558 - DEVICE_TITLE := OpenMesh OM5P-AC - DEVICE_PROFILE := OM5P-AC - DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x om-watchdog -endef - -TARGET_DEVICES += om5p_ac - -define Device/netgear_wndr3700 - ATH_SOC:=ar7100 - DEVICE_TITLE := NETGEAR WNDR3700 - DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset - NETGEAR_KERNEL_MAGIC := 0x33373030 - NETGEAR_BOARD_ID := WNDR3700 - IMAGE_SIZE := 7680k - IMAGES := sysupgrade.bin factory.img factory-NA.img - KERNEL := kernel-bin | append-dtb | lzma -d20 | netgear-uImage lzma - KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma -d20 | netgear-uImage lzma - IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs - IMAGE/sysupgrade.bin := $$(IMAGE/default) | check-size $$$$(IMAGE_SIZE) - IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE) - IMAGE/factory-NA.img := $$(IMAGE/default) | netgear-dni NA | check-size $$$$(IMAGE_SIZE) -endef -#TARGET_DEVICES += netgear_wndr3700 - -define Device/netgear_wndr3700v2 - $(Device/netgear_wndr3700) - DEVICE_TITLE := NETGEAR WNDR3700 v2 - NETGEAR_BOARD_ID := WNDR3700v2 - NETGEAR_KERNEL_MAGIC := 0x33373031 - NETGEAR_HW_ID := 29763654+16+64 - IMAGE_SIZE := 15872k - IMAGES := sysupgrade.bin factory.img -endef -#TARGET_DEVICES += netgear_wndr3700v2 - -define Device/netgear_wndr3800 - $(Device/netgear_wndr3700v2) - ATH_SOC := ar7161 - DEVICE_TITLE := NETGEAR WNDR3800 - NETGEAR_BOARD_ID := WNDR3800 - NETGEAR_HW_ID := 29763654+16+128 -endef -TARGET_DEVICES += netgear_wndr3800 - -define Device/buffalo_wzr-hp-g450h - ATH_SOC := ar7242 - DEVICE_TITLE := Buffalo WZR-HP-G450H - DEVICE_PROFILE := WZR-HP-G450H - DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport -endef - -TARGET_DEVICES += buffalo_wzr-hp-g450h diff --git a/target/linux/ath79/image/legacy.mk b/target/linux/ath79/image/legacy.mk deleted file mode 100644 index cbc859d..0000000 --- a/target/linux/ath79/image/legacy.mk +++ /dev/null @@ -1,1058 +0,0 @@ -rootfs_type=$(patsubst squashfs-%,squashfs,$(1)) - -# $(1): rootfs type. -# $(2): board name. -define imgname -$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(call rootfs_type,$(1)) -endef - -define rootfs_align -$(patsubst %-256k,0x40000,$(patsubst %-128k,0x20000,$(patsubst %-64k,0x10000,$(patsubst squashfs%,0x4,$(patsubst root.%,%,$(1)))))) -endef - -define sysupname -$(call imgname,$(1),$(2))-sysupgrade.bin -endef - -define factoryname -$(call imgname,$(1),$(2))-factory.bin -endef - -COMMA:=, - -define mkcmdline -$(if $(1),board=$(1) )$(if $(2),console=$(2)$(COMMA)$(3)) -endef - -define mtdpartsize -$(shell sz=`echo '$(2)' | sed -ne 's/.*[:$(COMMA)]\([0-9]*\)k[@]*[0-9a-zx]*($(1)).*/\1/p'`; [ -n "$$sz" ] && echo $$(($$sz * 1024))) -endef - -# $(1) : name of image build method to be used, e.g., AthLzma. -# $(2) : name of the build template to be used, e.g. 64k, 64kraw, 128k, etc. -# $(3) : name of the profile to be defined. -# $(4) : board name. -# $(5)~$(7) : arguments for $(mkcmdline) -# board=$(1) console=$(2),$(3) -# $(8)~$(14): extra arguments. -define SingleProfile - # $(1): action name, e.g. loader, buildkernel, squashfs, etc. - define Image/Build/Profile/$(3) - $$(call Image/Build/Template/$(2)/$$(1),$(1),$(4),$$(call mkcmdline,$(5),$(6),$(7)),$(8),$(9),$(10),$(11),$(12),$(13),$(14)) - endef -endef - -LOADER_MAKE := $(NO_TRACE_MAKE) -C lzma-loader KDIR=$(KDIR) - -VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux -UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage - -# $(1): input file. -# $(2): output file. -# $(3): extra arguments for lzma. -define CompressLzma - $(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(3) $(2) -endef - -define PatchKernel - cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1) - $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))" -endef - -define PatchKernel/initramfs - $(call PatchKernel,$(1),$(2),-initramfs) - cp $(KDIR_TMP)/vmlinux-initramfs-$(1) $(call imgname,initramfs,$(1)).bin -endef - -# $(1): board name. -# $(2): kernel command line. -# $(3): extra argumetns for lzma. -# $(4): name suffix, e.g. "-initramfs". -define PatchKernelLzma - cp $(KDIR)/vmlinux$(4) $(KDIR_TMP)/vmlinux$(4)-$(1) - $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(4)-$(1) "$(strip $(2))" - $(call CompressLzma,$(KDIR_TMP)/vmlinux$(4)-$(1),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(3)) -endef - -define PatchKernelGzip - cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1) - $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))" - gzip -9n -c $(KDIR_TMP)/vmlinux$(3)-$(1) > $(KDIR_TMP)/vmlinux$(3)-$(1).bin.gz -endef - -ifneq ($(SUBTARGET),mikrotik) -# $(1): compression method of the data. -# $(2): extra arguments. -# $(3): input data file. -# $(4): output file. -define MkuImage - mkimage -A mips -O linux -T kernel -a 0x80060000 -C $(1) $(2) \ - -e 0x80060000 -n 'MIPS $(VERSION_DIST) Linux-$(LINUX_VERSION)' \ - -d $(3) $(4) -endef - -# $(1): board name. -# $(2): kernel command line. -# $(3): extra arguments for lzma. -# $(4): name suffix, e.g. "-initramfs". -# $(5): extra arguments for mkimage. -define MkuImageLzma - $(call PatchKernelLzma,$(1),$(2),$(3),$(4)) - $(call MkuImage,lzma,$(5),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(KDIR_TMP)/vmlinux$(4)-$(1).uImage) -endef - -define MkuImageLzma/initramfs - $(call PatchKernelLzma,$(1),$(2),$(3),-initramfs) - $(call MkuImage,lzma,$(4),$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.lzma,$(call imgname,initramfs,$(1))-uImage.bin) -endef - -define MkuImageGzip - $(call PatchKernelGzip,$(1),$(2)) - $(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-$(1).bin.gz,$(KDIR_TMP)/vmlinux-$(1).uImage) -endef - -define MkuImageGzip/initramfs - $(call PatchKernelGzip,$(1),$(2),-initramfs) - $(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.gz,$(call imgname,initramfs,$(1))-uImage.bin) -endef - -define MkuImageOKLI - $(call MkuImage,lzma,-M 0x4f4b4c49,$(KDIR)/vmlinux.bin.lzma,$(KDIR_TMP)/vmlinux-$(1).okli) -endef -endif - -# $(1): name of the 1st file. -# $(2): size limit of the 1st file if it is greater than 262144, or -# the erase size of the flash if it is greater than zero and less -# than 262144 -# $(3): name of the 2nd file. -# $(4): size limit of the 2nd file if $(2) is greater than 262144, otherwise -# it is the size limit of the output file -# $(5): name of the output file. -# $(6): padding size. -define CatFiles - if [ $(2) -eq 0 ]; then \ - filename="$(3)"; fstype=$${filename##*\.}; \ - case "$${fstype}" in \ - *) bs=`stat -c%s $(1)`;; \ - esac; \ - ( dd if=$(1) bs=$${bs} conv=sync; cat $(3) ) > $(5); \ - if [ -n "$(6)" ]; then \ - case "$${fstype}" in \ - squashfs*) \ - padjffs2 $(5) $(6); \ - ;; \ - esac; \ - fi; \ - if [ `stat -c%s $(5)` -gt $(4) ]; then \ - echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \ - rm -f $(5); \ - fi; \ - else if [ $(2) -gt 262144 ]; then \ - if [ `stat -c%s "$(1)"` -gt $(2) ]; then \ - echo "Warning: $(1) is too big (> $(2) bytes)" >&2; \ - else if [ `stat -c%s $(3)` -gt $(4) ]; then \ - echo "Warning: $(3) is too big (> $(4) bytes)" >&2; \ - else \ - ( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \ - fi; fi; \ - else \ - ( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \ - if [ `stat -c%s $(5)` -gt $(4) ]; then \ - echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \ - rm -f $(5); \ - fi; \ - fi; fi -endef - -# $(1): rootfs type. -# $(2): board name. -# $(3): kernel image size limit. -# $(4): rootfs image size limit. -# $(5): padding argument for padjffs2. -Sysupgrade/KR=$(call CatFiles,$(2),$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(5))) -Sysupgrade/KRuImage=$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(2)),$(5)) -Sysupgrade/RKuImage=$(call CatFiles,$(KDIR)/root.$(1),$(4),$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(call sysupname,$(1),$(2))) - -# $(1): ubinize ini file -# $(2): working directory -# $(3): output file -# $(4): physical erase block size -# $(5): minimum I/O unit size -# $(6): custom options -define ubinize - $(CP) $(1) $(2) - ( cd $(2); $(STAGING_DIR_HOST)/bin/ubinize -o $(3) -p $(4) -m $(5) $(6) $(1)) -endef - -# -# Embed lzma-compressed kernel inside lzma-loader. -# -# $(1), suffix of output filename, e.g. generic, lowercase board name, etc. -# $(2), suffix of target file to build, e.g. bin, gz, elf -# $(3), kernel command line to pass from lzma-loader to kernel -# $(4), unused here -# $(5), suffix of kernel filename, e.g. -initramfs, or empty -define Image/BuildLoader - -rm -rf $(KDIR)/lzma-loader - $(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)"\ - LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \ - LOADER_DATA="$(KDIR)/vmlinux$(5).bin.lzma" BOARD="$(1)" \ - compile loader.$(2) - -$(if $(5),$(CP) $(KDIR)/loader-$(1).$(2) $(KDIR)/loader-$(1)$(5).$(2)) -endef - -# -# Build lzma-loader alone which will search for lzma-compressed kernel identified by -# uImage header with magic "OKLI" at boot time. -# -# $(4), offset into the flash space to start searching uImage magic "OKLI". -# $(5), size of search range starting at $(4). With 0 as the value, uImage -# header is expected to be at precisely $(4) -define Image/BuildLoaderAlone - -rm -rf $(KDIR)/lzma-loader - $(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)" \ - LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \ - BOARD="$(1)" FLASH_OFFS=$(4) FLASH_MAX=$(5) \ - compile loader.$(2) -endef - -define Build/Clean - $(LOADER_MAKE) clean -endef - -alfa_ap120c_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,13312k(rootfs),1536k(kernel),1152k(unknown)ro,64k(art)ro;spi0.1:-(unknown) -alfa_ap96_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13312k(rootfs),2048k(kernel),512k(caldata)ro,15360k@0x80000(firmware) -alfa_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) -alfa_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15936k(firmware),64k(nvram),64k(art)ro -all0258n_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),6272k(firmware),1536k(failsafe),64k(art)ro -all0315n_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env),13568k(firmware),2048k(failsafe),256k(art)ro -ap96_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1728k(kernel),64k(art)ro,7872k@0x40000(firmware) -ap121_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) -ap121_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,10944k(rootfs),4992k(kernel),64k(nvram),64k(art)ro,15936k@0x50000(firmware) -ap132_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),6400k(rootfs),64k(art)ro,7808k@0x50000(firmware) -ap135_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware) -ap136_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(mib0),64k(art)ro,7744k@0x50000(firmware) -ap143_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1472k(kernel),64k(art)ro,7744k@0x50000(firmware) -ap143_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware) -ap147_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware) -ap152_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware) -bxu2000n2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),8448k(rootfs),6016k(user),64k(cfg),64k(oem),64k(art)ro -cameo_ap81_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,3840k(firmware),64k(art)ro -cameo_ap91_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3712k(firmware),64k(mac)ro,64k(art)ro -cameo_ap99_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3520k(firmware),64k(mac)ro,192k(lp)ro,64k(art)ro -cameo_ap121_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,192k(language)ro,3648k(firmware) -cameo_ap121_mtdlayout_8M=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,256k(language)ro,7680k@0x80000(firmware) -cameo_ap123_mtdlayout_4M=mtdparts=spi0.0:64k(u-boot)ro,64k(nvram)ro,3712k(firmware),192k(lang)ro,64k(art)ro -cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro -cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro -cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art)ro,13632k@0xa0000(firmware) -eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro -db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) -dgl_5500_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro -dlan_hotspot_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(Config1)ro,64k(Config2)ro,7872k@0x40000(firmware),64k(art)ro -dlan_pro_500_wp_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,7680k@0x70000(firmware),64k(art)ro -dlan_pro_1200_ac_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,15872k@0x70000(firmware),64k(art)ro -cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy) -cameo_ap94_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7808k(firmware),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig) -esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware) -esr1750_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware) -epg5000_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware) -f9k1115v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),14464k(rootfs),1408k(kernel),64k(nvram)ro,64k(envram)ro,64k(art)ro,15872k@0x50000(firmware) -dlrtdev_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,640k(certs),960k(unknown)ro,64k@0x7f0000(caldata_copy) -dlrtdev_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7168k(firmware),640k(certs),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig) -planex_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),128k(art)ro -whrhpg300n_mtdlayout=mtdparts=spi0.0:248k(u-boot)ro,8k(u-boot-env)ro,3712k(firmware),64k(art)ro -wndap360_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),64k(nvram)ro,64k(art)ro -wnr2200_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro -wnr2000_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro -wnr2000v3_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro -wnr2000v4_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,3776k(firmware),64k(art)ro -r6100_mtdlayout=mtdparts=ar934x-nfc:128k(u-boot)ro,256k(caldata)ro,256k(caldata-backup),512k(config),512k(pot),2048k(kernel),122240k(ubi),25600k@0x1a0000(firmware),2048k(language),3072k(traffic_meter) -tew823dru_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro -wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata)ro,512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubi),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved) -zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k@0x50000(firmware) -mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro -zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k(zyxel_rfsd),2048k(romd),1024k(header),2048k(kernel),-(ubi) - -define Image/BuildKernel - cp $(KDIR)/vmlinux.elf $(VMLINUX).elf - cp $(KDIR)/vmlinux $(VMLINUX).bin - dd if=$(KDIR)/vmlinux.bin.lzma of=$(VMLINUX).lzma bs=65536 conv=sync - $(call MkuImage,lzma,,$(KDIR)/vmlinux.bin.lzma,$(UIMAGE)-lzma.bin) - cp $(KDIR)/loader-generic.elf $(VMLINUX)-lzma.elf - -mkdir -p $(KDIR_TMP) -endef - -define Image/BuildKernel/Initramfs - cp $(KDIR)/vmlinux-initramfs.elf $(VMLINUX)-initramfs.elf - cp $(KDIR)/vmlinux-initramfs $(VMLINUX)-initramfs.bin - dd if=$(KDIR)/vmlinux-initramfs.bin.lzma of=$(VMLINUX)-initramfs.lzma bs=65536 conv=sync - $(call MkuImage,lzma,,$(KDIR)/vmlinux-initramfs.bin.lzma,$(UIMAGE)-initramfs-lzma.bin) - cp $(KDIR)/loader-generic-initramfs.elf $(VMLINUX)-initramfs-lzma.elf - $(call Image/Build/Initramfs) -endef - -Image/Build/WRT400N/buildkernel=$(call MkuImageLzma,$(2),$(3)) - -define Image/Build/WRT400N - $(call Sysupgrade/KRuImage,$(1),$(2),1310720,6488064) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - wrt400n $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/root.$(1) $(call factoryname,$(1),$(2)); \ - fi -endef - - -define Image/Build/CameoAP94/buildkernel - $(call MkuImageLzma,$(2),$(3) $(4)) - $(call MkuImageLzma,$(2)-fat,$(3) $(5)) -endef - -define Image/Build/CameoAP94 - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(eval fwsize_fat=$(call mtdpartsize,firmware,$(5))) - $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - ( \ - dd if=$(call sysupname,$(1),$(2)); \ - echo -n "$(6)"; \ - ) > $(call imgname,$(1),$(2))-backup-loader.bin; \ - if [ `stat -c%s $(call sysupname,$(1),$(2))` -gt 4194304 ]; then \ - echo "Warning: $(call sysupname,$(1),$(2)) is too big" >&2; \ - else \ - ( \ - dd if=$(call sysupname,$(1),$(2)) bs=4096k conv=sync; \ - echo -n "$(7)"; \ - ) > $(call factoryname,$(1),$(2)); \ - fi; \ - fi - $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2)-fat.uImage,0,$(KDIR)/root.$(1),$$(($(fwsize_fat)-4*64*1024)),$(KDIR_TMP)/$(2)-fat.bin,64) - if [ -e "$(KDIR_TMP)/$(2)-fat.bin" ]; then \ - echo -n "" > $(KDIR_TMP)/$(2)-fat.dummy; \ - sh $(TOPDIR)/scripts/combined-image.sh \ - "$(KDIR_TMP)/$(2)-fat.bin" \ - "$(KDIR_TMP)/$(2)-fat.dummy" \ - $(call sysupname,$(1),$(2)-fat); \ - fi -endef - -define Image/Build/WZRHP - $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(3)-4*$(4)*1024)),$(4)) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - ( \ - echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \ - dd if=$(call sysupname,$(1),$(2)); \ - ) > $(call imgname,$(1),$(2))-tftp.bin; \ - buffalo-enc -p $(5) -v 1.99 \ - -i $(call sysupname,$(1),$(2)) \ - -o $(KDIR_TMP)/$(2).enc; \ - buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \ - -w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \ - -i $(KDIR_TMP)/$(2).enc \ - -o $(call factoryname,$(1),$(2)); \ - fi -endef - -Image/Build/WZRHP64K/buildkernel=$(call MkuImageLzma,$(2),$(3)) -Image/Build/WZRHP64K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) -Image/Build/WZRHP64K=$(call Image/Build/WZRHP,$(1),$(2),33095680,64,$(4)) - -Image/Build/WZRHP128K/buildkernel=$(call MkuImageLzma,$(2),$(3)) -Image/Build/WZRHP128K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) -Image/Build/WZRHP128K=$(call Image/Build/WZRHP,$(1),$(2),33030144,128,$(4)) - - -Image/Build/WHRHPG300N/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/WHRHPG300N/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - -define Image/Build/WHRHPG300N - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - ( \ - echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \ - dd if=$(call sysupname,$(1),$(2)); \ - ) > $(call imgname,$(1),$(2))-tftp.bin; \ - buffalo-enc -p $(5) -v 1.99 \ - -i $(call sysupname,$(1),$(2)) \ - -o $(KDIR_TMP)/$(2).enc; \ - buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \ - -w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \ - -i $(KDIR_TMP)/$(2).enc \ - -o $(call factoryname,$(1),$(2)); \ - fi -endef - - -define Image/Build/Cameo - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - factory_size=$$(($(fwsize) - $(6))); \ - ( \ - dd if=$(call sysupname,$(1),$(2)) bs=$${factory_size} conv=sync; \ - echo -n $(5); \ - ) > $(call factoryname,$(1),$(2)); \ - fi -endef - -Image/Build/CameoAP81/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap81_mtdlayout)) -Image/Build/CameoAP81=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap81_mtdlayout),$(4),65536) -Image/Build/CameoAP81/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap81_mtdlayout)) - -Image/Build/CameoAP91/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap91_mtdlayout)) -Image/Build/CameoAP91=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap91_mtdlayout),$(4),65536) -Image/Build/CameoAP91/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap91_mtdlayout)) - -Image/Build/CameoAP99/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap99_mtdlayout)) -Image/Build/CameoAP99=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap99_mtdlayout),$(4),65536) -Image/Build/CameoAP99/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap99_mtdlayout)) - -Image/Build/CameoAP123_4M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap123_mtdlayout_4M)) -Image/Build/CameoAP123_4M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap123_mtdlayout_4M),$(4),26) -Image/Build/CameoAP123_4M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap123_mtdlayout_4M)) - -Image/Build/CameoAP135/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/CameoAP135=$(call Image/Build/Cameo,$(1),$(2),$(3),$(4),$(5),26) -Image/Build/CameoAP135/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - -Image/Build/CameoDB120/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout)) -Image/Build/CameoDB120=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout),$(4),26) -Image/Build/CameoDB120/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout)) - -Image/Build/CameoDB120_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout_8M)) -Image/Build/CameoDB120_8M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout_8M),$(4),26) -Image/Build/CameoDB120_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout_8M)) - -define Image/Build/CameoHornet - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - for r in $(7); do \ - [ -n "$$r" ] && dashr="-$$r" || dashr=; \ - [ -z "$$r" ] && r="DEF"; \ - mkcameofw -M HORNET -R "$$r" -S $(5) -V $(6) -c \ - -K $(8) -I $(fwsize) \ - -k "$(call sysupname,$(1),$(2))" \ - -o $(call imgname,$(1),$(2))-factory$$dashr.bin; \ - true; \ - done; \ - fi -endef - -Image/Build/CameoAP121/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout)) -Image/Build/CameoAP121=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout),$(4),$(5),$(6),0xe0000) -Image/Build/CameoAP121/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout)) - -Image/Build/CameoAP121_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout_8M)) -Image/Build/CameoAP121_8M=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout_8M),$(4),$(5),$(6),0x100000) -Image/Build/CameoAP121_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout_8M)) - -define Image/Build/dLAN - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(eval rootsize=$(call mtdpartsize,rootfs,$(4))) - $(eval kernsize=$(call mtdpartsize,kernel,$(4))) - $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize))) -endef - -Image/Build/dLANLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/dLANLzma=$(call Image/Build/dLAN,$(1),$(2),$(3),$(4),$(5),$(6),$(7)) -Image/Build/dLANLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - -define Image/Build/Ath - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(eval rootsize=$(call mtdpartsize,rootfs,$(4))) - $(eval kernsize=$(call mtdpartsize,kernel,$(4))) - $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize))) -endef - -Image/Build/AthGzip/buildkernel=$(call MkuImageGzip,$(2),$(3) $(4)) -Image/Build/AthGzip=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7)) -Image/Build/AthGzip/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(4)) - -Image/Build/AthLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/AthLzma=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7)) -Image/Build/AthLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - - -Image/Build/Belkin/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/Belkin/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - -define Image/Build/Belkin - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(eval kernsize=$(call mtdpartsize,kernel,$(4))) - $(eval rootsize=$(call mtdpartsize,rootfs,$(4))) - $(call Sysupgrade/RKuImage,$(1),$(2),$(kernsize),$(rootsize)) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - edimax_fw_header -m $(5) -v "$(shell echo -n $(VERSION_DIST)$(REVISION) | cut -c -13)" \ - -n "uImage" \ - -i $(KDIR_TMP)/vmlinux-$(2).uImage \ - -o $(KDIR_TMP)/$(2)-uImage; \ - edimax_fw_header -m $(5) -v "$(shell echo -n $(VERSION_DIST)$(REVISION) | cut -c -13)" \ - -n "rootfs" \ - -i $(KDIR)/root.$(1) \ - -o $(KDIR_TMP)/$(2)-rootfs; \ - ( \ - dd if=$(KDIR_TMP)/$(2)-rootfs; \ - dd if=$(KDIR_TMP)/$(2)-uImage; \ - ) > "$(call factoryname,$(1),$(2))"; \ - fi -endef - -define Image/Build/EnGenius - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(eval rootsize=$(call mtdpartsize,rootfs,$(4))) - $(eval kernsize=$(call mtdpartsize,kernel,$(4))) - $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize))) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - mksenaofw -e $(call sysupname,$(1),$(2)) \ - -o $(call imgname,$(1),$(2))-factory.dlf \ - -r 0x101 -p $(7) -t 2; \ - fi -endef - -Image/Build/EnGenius/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/EnGenius/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - - -Image/Build/PB4X/buildkernel=$(call PatchKernelLzma,$(2),$(3)) - -define Image/Build/PB4X - dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \ - of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync - dd if=$(KDIR)/root.$(1) \ - of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync - -sh $(TOPDIR)/scripts/combined-image.sh \ - "$(call imgname,kernel,$(2)).bin" \ - "$(call imgname,$(1),$(2)-rootfs).bin" \ - $(call sysupname,$(1),$(2)) -endef - - -Image/Build/MyLoader/buildkernel=$(call PatchKernelLzma,$(2),$(3)) -Image/Build/MyLoader/initramfs=$(call PatchKernel/initramfs,$(2),$(3)) - -define Image/Build/MyLoader - $(eval fwsize=$(shell echo $$(($(4)-0x30000-4*64*1024)))) - $(eval fwimage=$(KDIR_TMP)/$(2)-$(5)-firmware.bin) - $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).bin.lzma,65536,$(KDIR)/root.$(1),$(fwsize),$(fwimage)) - if [ -e "$(fwimage)" ]; then \ - $(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) -s $(4) -v \ - -p0x00030000:0:al:0x80060000:firmware:$(fwimage) \ - $(call imgname,$(1),$(2))-$(5)-factory.img; \ - echo -n "" > $(KDIR_TMP)/empty.bin; \ - sh $(TOPDIR)/scripts/combined-image.sh \ - $(fwimage) $(KDIR_TMP)/empty.bin \ - $(call imgname,$(1),$(2))-$(5)-sysupgrade.bin; \ - fi -endef - -Image/Build/Planex/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(planex_mtdlayout)) -Image/Build/Planex/loader=$(call Image/BuildLoaderAlone,$(1),gz,$(2) $(planex_mtdlayout),0x52000,0) - -define Image/Build/Planex/buildkernel - [ -e "$(KDIR)/loader-$(2).gz" ] - $(call MkuImageOKLI,$(2)) - ( \ - dd if=$(KDIR)/loader-$(2).gz bs=8128 count=1 conv=sync; \ - dd if=$(KDIR_TMP)/vmlinux-$(2).okli; \ - ) > $(KDIR_TMP)/kernel-$(2).bin - $(call MkuImage,gzip,,$(KDIR_TMP)/kernel-$(2).bin,$(KDIR_TMP)/vmlinux-$(2).uImage) -endef - -define Image/Build/Planex - $(eval fwsize=$(call mtdpartsize,firmware,$(planex_mtdlayout))) - $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - $(STAGING_DIR_HOST)/bin/mkplanexfw \ - -B $(2) \ - -v 2.00.00 \ - -i $(call sysupname,$(1),$(2)) \ - -o $(call factoryname,$(1),$(2)); \ - fi -endef - - -Image/Build/ALFA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/ALFA/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - -define Image/Build/ALFA - $(call Sysupgrade/RKuImage,$(1),$(2),$(5),$(6)) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - rm -rf $(KDIR)/$(1); \ - mkdir -p $(KDIR)/$(1); \ - cd $(KDIR)/$(1); \ - cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/$(1)/$(7); \ - cp $(KDIR)/root.$(1) $(KDIR)/$(1)/$(8); \ - $(TAR) c \ - $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \ - -C $(KDIR)/$(1) $(7) $(8) \ - | gzip -9nc > $(call factoryname,$(1),$(2)); \ - ( \ - echo WRM7222C | dd bs=32 count=1 conv=sync; \ - echo -ne '\xfe'; \ - ) >> $(call factoryname,$(1),$(2)); \ - fi -endef - - -Image/Build/Senao/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/Senao/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - -define Image/Build/Senao - mkdir -p $(KDIR_TMP)/$(2)/ - touch $(KDIR_TMP)/$(2)/FWINFO-OpenWrt-$(REVISION)-$(2) - -$(CP) ./$(2)/* $(KDIR_TMP)/$(2)/ - dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \ - of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-uImage-lzma.bin bs=64k conv=sync - dd if=$(KDIR)/root.$(1) \ - of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-root.$(1) bs=64k conv=sync - ( \ - cd $(KDIR_TMP)/$(2)/; \ - $(TAR) -c \ - $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \ - * | gzip -9nc > $(call factoryname,$(1),$(2)) \ - ) - -rm -rf $(KDIR_TMP)/$(2)/ - -sh $(TOPDIR)/scripts/combined-image.sh \ - $(KDIR_TMP)/vmlinux-$(2).uImage \ - $(KDIR)/root.$(1) \ - $(call sysupname,$(1),$(2)) -endef - -define Image/Build/CyberTAN - echo -n '' > $(KDIR_TMP)/empty.bin - -$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp \ - -f $(KDIR_TMP)/vmlinux-$(2).uImage -F $(KDIR_TMP)/empty.bin \ - -x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1) && \ - $(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) \ - -i $(KDIR)/image.tmp \ - -o $(call sysupname,$(1),$(2)) - -$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp -f $(KDIR_TMP)/vmlinux-$(2).uImage \ - -x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1) && \ - $(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) -g \ - -i $(KDIR)/image.tmp \ - -o $(call factoryname,$(1),$(2)) - -rm $(KDIR)/image.tmp -endef - -Image/Build/CyberTANGZIP/loader=$(call Image/BuildLoader,$(1),gz,$(2),0x80060000) -Image/Build/CyberTANGZIP/buildkernel=$(call MkuImage,gzip,,$(KDIR)/loader-$(2).gz,$(KDIR_TMP)/vmlinux-$(2).uImage) -Image/Build/CyberTANGZIP=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5)) - -Image/Build/CyberTANLZMA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/CyberTANLZMA=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5)) - - -Image/Build/Netgear/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5)) - -define Image/Build/Netgear/buildkernel - $(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5)) - -rm -rf $(KDIR_TMP)/$(2) - mkdir -p $(KDIR_TMP)/$(2)/image - cat $(KDIR_TMP)/vmlinux-$(2).uImage > $(KDIR_TMP)/$(2)/image/uImage - $(STAGING_DIR_HOST)/bin/mksquashfs-lzma \ - $(KDIR_TMP)/$(2) $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1 \ - -noappend -root-owned -be -b 65536 \ - $(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH)) - ( \ - cat $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1; \ - dd if=/dev/zero bs=1k count=1 \ - ) > $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2 - mkimage -A mips -O linux -T filesystem -C none -M $(5) \ - -a 0xbf070000 -e 0xbf070000 \ - -n 'MIPS $(VERSION_DIST) Linux-$(LINUX_VERSION)' \ - -d $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2 \ - $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs -endef - -define Image/Build/Netgear - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage.squashfs,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64) - if [ -e $(call sysupname,$(1),$(2)) ]; then \ - for r in $(7) ; do \ - [ -n "$$r" ] && dashr="-$$r" || dashr= ; \ - $(STAGING_DIR_HOST)/bin/mkdniimg \ - -B $(6) -v $(VERSION_DIST).$(REVISION) -r "$$r" $(8) \ - -i $(call sysupname,$(1),$(2)) \ - -o $(call imgname,$(1),$(2))-factory$$dashr.img; \ - done; \ - fi - if [ "$2" = "wnr2000" ]; then \ - dd if=$(KDIR)/root.$(1) \ - of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \ - fi -endef - - -Image/Build/NetgearLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5)) -Image/Build/NetgearLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5)) - -define Image/Build/NetgearLzma - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64) -endef - - -Image/Build/NetgearNAND/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5)) - -# $(1): (empty) -# $(2): Board name (small caps) -# $(3): Kernel board specific cmdline -# $(4): Kernel mtdparts definition -# $(5): U-Boot magic -define Image/Build/NetgearNAND/buildkernel - $(eval kernelsize=$(call mtdpartsize,kernel,$(4))) - $(call PatchKernelLzma,$(2),$(3) $(4),-d20) - dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \ - of=$(KDIR_TMP)/vmlinux-$(2).bin.tmp \ - bs=$$(($(kernelsize)-131072-2*64-1)) \ - count=1 conv=sync - $(call MkuImage,lzma,-M $(5),$(KDIR_TMP)/vmlinux-$(2).bin.tmp,$(KDIR_TMP)/vmlinux-$(2).uImage) - echo -ne '\xff' >> $(KDIR_TMP)/vmlinux-$(2).uImage - # create a fake rootfs image - dd if=/dev/zero of=$(KDIR_TMP)/fakeroot-$(2) bs=131072 count=1 - mkimage -A mips -O linux -T filesystem -C none \ - -a 0xbf070000 -e 0xbf070000 \ - -n 'MIPS $(VERSION_DIST) fakeroot' \ - -d $(KDIR_TMP)/fakeroot-$(2) \ - -M $(5) \ - $(KDIR_TMP)/fakeroot-$(2).uImage - # append the fake rootfs image to the kernel, it will reside in the last - # erase block of the kernel partition - cat $(KDIR_TMP)/fakeroot-$(2).uImage >> $(KDIR_TMP)/vmlinux-$(2).uImage -endef - - -# $(1): rootfs image suffix -# $(2): Board name (small caps) -# $(3): Kernel board specific cmdline -# $(4): Kernel mtdparts definition -# $(5): U-Boot magic -# $(6): Board name (upper caps) -# $(7): firmware region code (not used yet) -# $(8): DNI Hardware version -# $(9): suffix of the configuration file for ubinize -define Image/Build/NetgearNAND - $(eval firmwaresize=$(call mtdpartsize,firmware,$(4))) - $(eval kernelsize=$(call mtdpartsize,kernel,$(4))) - $(eval imageraw=$(KDIR_TMP)/$(2)-raw.img) - $(CP) $(KDIR)/root.squashfs-raw $(KDIR_TMP)/root.squashfs - echo -ne '\xde\xad\xc0\xde' > $(KDIR_TMP)/jffs2.eof - $(call ubinize,ubinize-$(9).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5) - ( \ - dd if=$(KDIR_TMP)/vmlinux-$(2).uImage; \ - dd if=$(KDIR_TMP)/$(2)-root.ubi \ - ) > $(imageraw) - $(STAGING_DIR_HOST)/bin/mkdniimg \ - -B $(6) -v $(VERSION_DIST).$(REVISION) -r "$$r" $(8) \ - -i $(imageraw) \ - -o $(call imgname,ubi,$(2))-factory.img - - $(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/vmlinux-$(2).uImage) -endef - -ZYXEL_UBOOT = $(KDIR)/u-boot-nbg460n_550n_550nh.bin -ZYXEL_UBOOT_BIN = $(wildcard $(BIN_DIR)/u-boot-nbg460n_550n_550nh/u-boot.bin) - -Image/Build/ZyXEL/buildkernel=$(call MkuImageLzma,$(2),$(3)) - -define Image/Build/ZyXEL - $(call Sysupgrade/KRuImage,$(1),$(2),917504,2752512) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - if [ ! -f $(ZYXEL_UBOOT) ]; then \ - echo "Warning: $(ZYXEL_UBOOT) not found" >&2; \ - else \ - $(STAGING_DIR_HOST)/bin/mkzynfw \ - -B $(4) \ - -b $(ZYXEL_UBOOT) \ - -r $(call sysupname,$(1),$(2)):0x10000 \ - -o $(call factoryname,$(1),$(2)); \ - fi; fi -endef - -define Image/Build/ZyXELNAND/buildkernel - $(eval kernelsize=$(call mtdpartsize,kernel,$(5))) - $(call MkuImageLzma,$(2),$(3) $(5) $(6)) - mkdir -p $(KDIR_TMP)/$(2)/image/boot - cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR_TMP)/$(2)/image/boot/vmlinux.lzma.uImage - $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \ - --pad=$(kernelsize) --big-endian --squash-uids -v -e 128KiB \ - -o $(KDIR_TMP)/$(2)-kernel.jffs2 \ - -d $(KDIR_TMP)/$(2)/image \ - 2>&1 1>/dev/null | awk '/^.+$$/' - -rm -rf $(KDIR_TMP)/$(2) -endef - -define Image/Build/ZyXELNAND - if [ "$(1)" != "squashfs" ]; then \ - echo Only squashfs is supported; \ - return 0; \ - fi - $(eval firmwaresize=$(call mtdpartsize,firmware,$(4))) - $(eval kernelsize=$(call mtdpartsize,kernel,$(4))) - $(eval imageraw=$(KDIR_TMP)/$(2)-raw.img) - $(CP) $(KDIR)/root.$(1) $(KDIR_TMP)/ubi_root.img - $(call ubinize,ubinize-$(2).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5) - ( \ - dd if=$(KDIR_TMP)/$(2)-kernel.jffs2; \ - dd if=$(KDIR_TMP)/$(2)-root.ubi \ - ) > $(imageraw) - dd if=$(imageraw) of=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory.bin \ - bs=128k conv=sync - $(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/$(2)-kernel.jffs2) -endef - - -Image/Build/OpenMesh/buildkernel=$(call MkuImageLzma,$(2)) -Image/Build/OpenMesh/initramfs=$(call MkuImageLzma/initramfs,$(2),) - -define Image/Build/OpenMesh - -sh $(TOPDIR)/scripts/om-fwupgradecfg-gen.sh \ - "$(4)" \ - "$(BUILD_DIR)/fwupgrade.cfg-$(4)" \ - "$(KDIR_TMP)/vmlinux-$(2).uImage" \ - "$(KDIR)/root.$(1)" - -sh $(TOPDIR)/scripts/combined-ext-image.sh \ - "$(4)" "$(call factoryname,$(1),$(2))" \ - "$(BUILD_DIR)/fwupgrade.cfg-$(4)" "fwupgrade.cfg" \ - "$(KDIR_TMP)/vmlinux-$(2).uImage" "kernel" \ - "$(KDIR)/root.$(1)" "rootfs" - if [ -e "$(call factoryname,$(1),$(2))" ]; then \ - cp "$(call factoryname,$(1),$(2))" "$(call sysupname,$(1),$(2))"; \ - fi -endef - - -Image/Build/Zcomax/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/Zcomax/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - -define Image/Build/Zcomax - $(call Sysupgrade/RKuImage,$(1),$(2),1507328,6356992) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - $(STAGING_DIR_HOST)/bin/mkzcfw \ - -B $(2) \ - -k $(KDIR_TMP)/vmlinux-$(2).uImage \ - -r $(KDIR)/root.$(1) \ - -o $(call imgname,$(1),$(2))-factory.img; \ - fi -endef - - -# $(1): template name to be defined. -# $(2): squashfs suffix to be used. -define BuildTemplate - # $(1) : name of build method. - # $(2) : board name. - # $(3) : kernel command line. - # $(4)~$(8): extra arguments. - define Image/Build/Template/$(1)/initramfs - $$(call Image/Build/$$(1)/initramfs,initramfs,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10)) - endef - define Image/Build/Template/$(1)/loader - $$(call Image/Build/$$(1)/loader,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10)) - endef - define Image/Build/Template/$(1)/buildkernel - $$(call Image/Build/$$(1)/buildkernel,,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10)) - endef - define Image/Build/Template/$(1)/squashfs - $$(call Image/Build/$$(1),squashfs$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10)) - endef -endef - -$(eval $(call BuildTemplate,squashfs-only)) -$(eval $(call BuildTemplate,64k,-64k)) -$(eval $(call BuildTemplate,64kraw,-raw)) -$(eval $(call BuildTemplate,64kraw-nojffs,-raw)) -$(eval $(call BuildTemplate,128k)) -$(eval $(call BuildTemplate,128kraw,-raw)) -$(eval $(call BuildTemplate,256k)) -$(eval $(call BuildTemplate,all)) - -ifeq ($(SUBTARGET),generic) -$(eval $(call SingleProfile,ALFA,64k,ALFANX,alfa-nx,ALFA-NX,ttyS0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,vmlinux.gz.uImage,pb9x-2.6.31-jffs2)) -$(eval $(call SingleProfile,ALFA,64k,HORNETUB,hornet-ub,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel_image,rootfs_image)) -$(eval $(call SingleProfile,ALFA,64k,TUBE2H8M,tube2h-8M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel.image,rootfs.image)) - -$(eval $(call SingleProfile,AthGzip,64k,AP96,ap96,AP96,ttyS0,115200,$$(ap96_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthGzip,64k,WNDAP360,wndap360,WNDAP360,ttyS0,9600,$$(wndap360_mtdlayout),KRuImage,65536)) - -$(eval $(call SingleProfile,AthLzma,64k,ALFAAP120C,alfa-ap120c,ALFA-AP120C,ttyS0,115200,$$(alfa_ap120c_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,ALFAAP96,alfa-ap96,ALFA-AP96,ttyS0,115200,$$(alfa_ap96_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,ALL0258N,all0258n,ALL0258N,ttyS0,115200,$$(all0258n_mtdlayout),KRuImage,65536)) -$(eval $(call SingleProfile,AthLzma,256k,ALL0315N,all0315n,ALL0315N,ttyS0,115200,$$(all0315n_mtdlayout),KRuImage,262144)) -$(eval $(call SingleProfile,AthLzma,64k,AP121_8M,ap121-8M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_8M),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP121_16M,ap121-16M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_16M),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP132,ap132,AP132,ttyS0,115200,$$(ap132_mtdlayout),KRuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP135,ap135-020,AP135-020,ttyS0,115200,$$(ap135_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP136_010,ap136-010,AP136-010,ttyS0,115200,$$(ap136_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP136_020,ap136-020,AP136-020,ttyS0,115200,$$(ap136_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP143_8M,ap143-8M,AP143,ttyS0,115200,$$(ap143_mtdlayout_8M),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP143_16M,ap143-16M,AP143,ttyS0,115200,$$(ap143_mtdlayout_16M),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP147_010,ap147-010,AP147-010,ttyS0,115200,$$(ap147_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP152_16M,ap152-16M,AP152,ttyS0,115200,$$(ap152_mtdlayout_16M),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,BXU2000N2,bxu2000n-2-a1,BXU2000n-2-A1,ttyS0,115200,$$(bxu2000n2_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,CAP4200AG,cap4200ag,CAP4200AG,ttyS0,115200,$$(cap4200ag_mtdlayout),KRuImage)) -$(eval $(call SingleProfile,AthLzma,64k,DB120,db120,DB120,ttyS0,115200,$$(db120_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,HORNETUBx2,hornet-ub-x2,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536)) -$(eval $(call SingleProfile,AthLzma,64k,TUBE2H16M,tube2h-16M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536)) - -$(eval $(call SingleProfile,Belkin,64k,F9K1115V2,f9k1115v2,F9K1115V2,ttyS0,115200,$$(f9k1115v2_mtdlayout),BR-6679BAC)) - -$(eval $(call SingleProfile,CameoAP121_8M,64kraw-nojffs,DIR505A1,dir-505-a1,DIR-505-A1,ttyATH0,115200,"HORNET-PACKET-DIR505A1-3",1.99.99,"")) - -$(eval $(call SingleProfile,CameoAP135,64kraw,DGL5500A1,dgl-5500-a1,DGL-5500-A1,ttyS0,115200,$$(dgl_5500_mtdlayout),"00AP135AR9558-RT-130508-00")) -$(eval $(call SingleProfile,CameoAP135,64kraw,TEW823DRU,tew-823dru,TEW-823DRU,ttyS0,115200,$$(tew823dru_mtdlayout) mem=256M,"00AP135AR9558-RT-131129-00")) - -$(eval $(call SingleProfile,CameoDB120,64kraw,DHP1565A1,dhp-1565-a1,DHP-1565-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00")) -$(eval $(call SingleProfile,CameoDB120,64kraw,DIR825C1,dir-825-c1,DIR-825-C1,ttyS0,115200,"00DB120AR9344-RT-101214-00")) -$(eval $(call SingleProfile,CameoDB120,64kraw,DIR835A1,dir-835-a1,DIR-835-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00")) - -$(eval $(call SingleProfile,CameoDB120_8M,64kraw,TEW732BR,tew-732br,TEW-732BR,ttyS0,115200,"00DB120AR9341-RT-120906-NA")) - -$(eval $(call SingleProfile,CyberTANGZIP,64k,E2100L,e2100l,E2100L,ttyS0,115200,,1.00.01)) -$(eval $(call SingleProfile,CyberTANGZIP,64k,WRT160NL,wrt160nl,WRT160NL,ttyS0,115200,,1.00.01)) - -$(eval $(call SingleProfile,CyberTANLZMA,64k,MYNETREXT,mynet-rext,MYNET-REXT,ttyS0,115200,$$(mynet_rext_mtdlayout) root=31:2,1.00.01)) - -$(eval $(call SingleProfile,CameoAP94,64kraw,DIR825B1,dir-825-b1,DIR-825-B1,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00)) -$(eval $(call SingleProfile,CameoAP94,64kraw,TEW673GRU,tew-673gru,TEW-673GRU,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-01,00AP94-AR7161-RT-080619-01)) -$(eval $(call SingleProfile,CameoAP94,64kraw,DLRTDEV01,dlrtdev01,DIR-825-B1,ttyS0,115200,$$(dlrtdev_mtdlayout),$$(dlrtdev_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00)) - -$(eval $(call SingleProfile,dLANLzma,64k,dLAN_Hotspot,dlan-hotspot,dLAN-Hotspot,ttyATH0,115200,$$(dlan_hotspot_mtdlayout) mem=64M,KRuImage,65536)) -$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_500_wp,dlan-pro-500-wp,dLAN-pro-500-wp,ttyS0,115200,$$(dlan_pro_500_wp_mtdlayout) mem=128M,KRuImage,65536)) -$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_1200_ac,dlan-pro-1200-ac,dLAN-pro-1200-ac,ttyS0,115200,$$(dlan_pro_1200_ac_mtdlayout) mem=128M,KRuImage,65536)) - -$(eval $(call SingleProfile,EnGenius,64k,ESR900,esr900,ESR900,ttyS0,115200,$$(esr900_mtdlayout),KRuImage,,0x4e)) -$(eval $(call SingleProfile,EnGenius,64k,ESR1750,esr1750,ESR1750,ttyS0,115200,$$(esr1750_mtdlayout),KRuImage,,0x61)) -$(eval $(call SingleProfile,EnGenius,64k,EPG5000,epg5000,EPG5000,ttyS0,115200,$$(epg5000_mtdlayout),KRuImage,,0x71)) - -$(eval $(call SingleProfile,MyLoader,64k,WP543_8M,wp543,,ttyS0,115200,0x800000,8M)) -$(eval $(call SingleProfile,MyLoader,64k,WP543_16M,wp543,,ttyS0,115200,0x1000000,16M)) -$(eval $(call SingleProfile,MyLoader,64k,WPE72_8M,wpe72,,ttyS0,115200,0x800000,8M)) -$(eval $(call SingleProfile,MyLoader,64k,WPE72_16M,wpe72,,ttyS0,115200,0x1000000,16M)) - -$(eval $(call SingleProfile,Netgear,64kraw,WNR2200,wnr2200,WNR2200,ttyS0,115200,$$(wnr2200_mtdlayout),0x32323030,wnr2200,"" NA,)) - -$(eval $(call SingleProfile,OpenMesh,squashfs-only,A60,a60,,,,A60)) -$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM2P,om2p,,,,OM2P)) -$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5P,om5p,,,,OM5P)) -$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5PAC,om5pac,,,,OM5PAC)) -$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR600,mr600,,,,MR600)) -$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR900,mr900,,,,MR900)) -$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR1750,mr1750,,,,MR1750)) - -$(eval $(call SingleProfile,PB4X,128k,ALL0305,all0305,ALL0305,ttyS0,115200)) -$(eval $(call SingleProfile,PB4X,128k,EAP7660D,eap7660d,EAP7660D,ttyS0,115200)) -$(eval $(call SingleProfile,PB4X,64k,JA76PF,ja76pf,JA76PF,ttyS0,115200)) -$(eval $(call SingleProfile,PB4X,64k,JA76PF2,ja76pf2,JA76PF2,ttyS0,115200)) -$(eval $(call SingleProfile,PB4X,64k,JWAP003,jwap003,JWAP003,ttyS0,115200)) -$(eval $(call SingleProfile,PB4X,64k,PB42,pb42,PB42,ttyS0,115200)) -$(eval $(call SingleProfile,PB4X,64k,PB44,pb44,PB44,ttyS0,115200)) - -$(eval $(call SingleProfile,Planex,64kraw,MZKW04NU,mzk-w04nu,MZK-W04NU,ttyS0,115200)) -$(eval $(call SingleProfile,Planex,64kraw,MZKW300NH,mzk-w300nh,MZK-W300NH,ttyS0,115200)) - -$(eval $(call SingleProfile,Senao,squashfs-only,EAP300V2,eap300v2,EAP300V2,ttyS0,115200,$$(eap300v2_mtdlayout))) - -$(eval $(call SingleProfile,WRT400N,64k,WRT400N,wrt400n,WRT400N,ttyS0,115200)) - -$(eval $(call SingleProfile,WZRHP128K,128kraw,WZRHPG300NH,wzr-hp-g300nh,WZR-HP-G300NH,ttyS0,115200,WZR-HP-G300NH)) -$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG300NH2,wzr-hp-g300nh2,WZR-HP-G300NH2,ttyS0,115200,WZR-HP-G300NH2)) -$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPAG300H,wzr-hp-ag300h,WZR-HP-AG300H,ttyS0,115200,WZR-HP-AG300H)) -$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG450H,wzr-hp-g450h,WZR-HP-G450H,ttyS0,115200,WZR-HP-AG450H)) -$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR600DHP,wzr-600dhp,WZR-HP-AG300H,ttyS0,115200,WZR-600DHP)) -$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR450HP2,wzr-450hp2,WZR-450HP2,ttyS0,115200,WZR-450HP2)) - -$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H28,zcn-1523h-2-8,ZCN-1523H-2,ttyS0,115200,$$(zcn1523h_mtdlayout))) -$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H516,zcn-1523h-5-16,ZCN-1523H-5,ttyS0,115200,$$(zcn1523h_mtdlayout))) - -endif # ifeq ($(SUBTARGET),generic) - - -ifeq ($(SUBTARGET),tiny) - -$(eval $(call SingleProfile,CameoAP91,64kraw,DIR600A1,dir-600-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-00")) -$(eval $(call SingleProfile,CameoAP91,64kraw,DIR601A1,dir-601-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-02")) -$(eval $(call SingleProfile,CameoAP91,64kraw,FR54RTR,fr-54rtr,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-01")) - -$(eval $(call SingleProfile,CameoAP99,64kraw,EBR2310C1,ebr-2310-c1,EBR-2310-C1,ttyS0,115200,"AP91-AR7240-RT-090223-03")) -$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E1,dir-615-e1,DIR-615-E1,ttyS0,115200,"AP93-AR7240-RT-081028-00")) -$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E4,dir-615-e4,DIR-615-E4,ttyS0,115200,"AP99-AR7240-RT-091105-05")) - -$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I1,dir-615-i1,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-1012I1-00")) -$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I3,dir-615-i3,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-101214-00")) - -$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,A02RBW300N,a02-rb-w300n,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-03")) -$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,DIR615C1,dir-615-c1,DIR-615-C1,ttyS0,115200,"AP81-AR9130-RT-070614-02")) -$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW632BRP,tew-632brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-00")) -$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_FW,tew-652brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-080609-05")) -$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_RECOVERY,tew-652brp-recovery,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-02")) - -$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,TEW712BR,tew-712br,TEW-712BR,ttyATH0,115200,"HORNET-RT-TEW712BR-3",1.99,"")) -$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,DIR601B1,dir-601-b1,TEW-712BR,ttyATH0,115200,"HORNET-RT-DIR601B1-3",2.99.99,"" "NA")) - -$(eval $(call SingleProfile,MyLoader,64k,WP543_4M,wp543,,ttyS0,115200,0x400000,4M)) -$(eval $(call SingleProfile,MyLoader,64k,WPE72_4M,wpe72,,ttyS0,115200,0x400000,4M)) - -$(eval $(call SingleProfile,Netgear,64kraw,WNR2000V3,wnr2000v3,WNR2000V3,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303033,WNR2000V3,"" NA,-H 29763551+04+32)) -$(eval $(call SingleProfile,NetgearLzma,64kraw,WNR2000V4,wnr2000v4,WNR2000V4,ttyS0,115200,$$(wnr2000v4_mtdlayout),0x32303034,WNR2000V4,"" NA,)) -$(eval $(call SingleProfile,Netgear,64kraw,WNR2000,wnr2000,WNR2000,ttyS0,115200,$$(wnr2000_mtdlayout),0x32303031,WNR2000,"" NA,)) -$(eval $(call SingleProfile,Netgear,64kraw,REALWNR612V2,wnr612v2,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,WNR612V2,"",)) -$(eval $(call SingleProfile,Netgear,64kraw,N150R,n150r,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,N150R,"",)) -$(eval $(call SingleProfile,Netgear,64kraw,REALWNR1000V2,wnr1000v2,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303031,WNR1000V2,"",)) -$(eval $(call SingleProfile,Netgear,64kraw,WNR1000V2_VC,wnr1000v2-vc,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303030,WNR1000V2-VC,"",)) -$(eval $(call SingleProfile,Netgear,64kraw,WPN824N,wpn824n,WPN824N,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31313030,WPN824N,"" NA,)) - -$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRG301N,whr-g301n,WHR-G301N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-G301N)) -$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPG300N,whr-hp-g300n,WHR-HP-G300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-G300N)) -$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPGN,whr-hp-gn,WHR-HP-GN,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-GN)) -$(eval $(call SingleProfile,WHRHPG300N,64kraw,WLAEAG300N,wlae-ag300n,WLAE-AG300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WLAE-AG300N)) - -$(eval $(call SingleProfile,ZyXEL,64k,NBG_460N_550N_550NH,nbg460n_550n_550nh,NBG460N,ttyS0,115200,NBG-460N)) - -endif # ifeq ($(SUBTARGET),tiny) - - -ifeq ($(SUBTARGET),nand) - -$(eval $(call SingleProfile,NetgearNAND,64k,WNDR3700V4,wndr3700v4,WNDR3700_V4,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR3700v4,"",-H 29763948+128+128,wndr4300)) -$(eval $(call SingleProfile,NetgearNAND,64k,WNDR4300V1,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR4300,"",-H 29763948+0+128+128+2x2+3x3,wndr4300)) -$(eval $(call SingleProfile,NetgearNAND,64k,R6100,r6100,R6100,ttyS0,115200,$$(r6100_mtdlayout),0x36303030,R6100,"",-H 29764434+0+128+128+2x2+2x2,wndr4300)) - -$(eval $(call SingleProfile,ZyXELNAND,128k,NBG6716,nbg6716,NBG6716,ttyS0,115200,NBG6716,$$(zyx_nbg6716_mtdlayout),mem=256M)) - -endif # ifeq ($(SUBTARGET),nand) - -define Image/Build/squashfs - cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-raw - cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-64k - $(STAGING_DIR_HOST)/bin/padjffs2 $(KDIR)/root.squashfs-64k 64 - $(call prepare_generic_squashfs,$(KDIR)/root.squashfs) - dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync -endef - -define Image/Prepare - $(if $(wildcard $(ZYXEL_UBOOT_BIN)),cp $(ZYXEL_UBOOT_BIN) $(ZYXEL_UBOOT)) - $(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma) -ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),) - $(call CompressLzma,$(KDIR)/vmlinux-initramfs,$(KDIR)/vmlinux-initramfs.bin.lzma) - $(call Image/BuildLoader,generic,elf,,,-initramfs) -endif - $(call Image/BuildLoader,generic,elf) -endef - -define Image/Prepare/Profile - $(call Image/Build/Profile/$(1),loader) -endef - -define Image/Build/Profile - $(call Image/Build/Profile/$(1),buildkernel) - $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),$(call Image/Build/Profile/$(1),initramfs)) - $(call Image/Build/Profile/$(1),$(2)) -endef - -# $(1): filesystem type. -define Image/Build - $(call Image/Build/$(call rootfs_type,$(1)),$(1)) -endef diff --git a/target/linux/ath79/image/lzma-loader/Makefile b/target/linux/ath79/image/lzma-loader/Makefile deleted file mode 100644 index 9b81e87..0000000 --- a/target/linux/ath79/image/lzma-loader/Makefile +++ /dev/null @@ -1,66 +0,0 @@ -# -# Copyright (C) 2011 OpenWrt.org -# Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -include $(TOPDIR)/rules.mk - -LZMA_TEXT_START := 0x80a00000 -LOADADDR := 0x80060000 -LOADER := loader.bin -LOADER_NAME := $(basename $(notdir $(LOADER))) -LOADER_DATA := -TARGET_DIR := -FLASH_OFFS := -FLASH_MAX := -BOARD := - -ifeq ($(TARGET_DIR),) -TARGET_DIR := $(KDIR) -endif - -LOADER_BIN := $(TARGET_DIR)/$(LOADER_NAME).bin -LOADER_GZ := $(TARGET_DIR)/$(LOADER_NAME).gz -LOADER_ELF := $(TARGET_DIR)/$(LOADER_NAME).elf - -PKG_NAME := lzma-loader -PKG_BUILD_DIR := $(KDIR)/$(PKG_NAME) - -.PHONY : loader-compile loader.bin loader.elf loader.gz - -$(PKG_BUILD_DIR)/.prepared: - mkdir $(PKG_BUILD_DIR) - $(CP) ./src/* $(PKG_BUILD_DIR)/ - touch $@ - -loader-compile: $(PKG_BUILD_DIR)/.prepared - $(MAKE) -C $(PKG_BUILD_DIR) CROSS_COMPILE="$(TARGET_CROSS)" \ - LZMA_TEXT_START=$(LZMA_TEXT_START) \ - LOADADDR=$(LOADADDR) \ - LOADER_DATA=$(LOADER_DATA) \ - FLASH_OFFS=$(FLASH_OFFS) \ - FLASH_MAX=$(FLASH_MAX) \ - BOARD="$(BOARD)" \ - clean all - -loader.gz: $(PKG_BUILD_DIR)/loader.bin - gzip -nc9 $< > $(LOADER_GZ) - -loader.elf: $(PKG_BUILD_DIR)/loader.elf - $(CP) $< $(LOADER_ELF) - -loader.bin: $(PKG_BUILD_DIR)/loader.bin - $(CP) $< $(LOADER_BIN) - -download: -prepare: $(PKG_BUILD_DIR)/.prepared -compile: loader-compile - -install: - -clean: - rm -rf $(PKG_BUILD_DIR) - diff --git a/target/linux/ath79/image/lzma-loader/src/LzmaDecode.c b/target/linux/ath79/image/lzma-loader/src/LzmaDecode.c deleted file mode 100644 index cb83453..0000000 --- a/target/linux/ath79/image/lzma-loader/src/LzmaDecode.c +++ /dev/null @@ -1,584 +0,0 @@ -/* - LzmaDecode.c - LZMA Decoder (optimized for Speed version) - - LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this Code, expressly permits you to - statically or dynamically link your Code (or bind by name) to the - interfaces of this file without subjecting your linked Code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#include "LzmaDecode.h" - -#define kNumTopBits 24 -#define kTopValue ((UInt32)1 << kNumTopBits) - -#define kNumBitModelTotalBits 11 -#define kBitModelTotal (1 << kNumBitModelTotalBits) -#define kNumMoveBits 5 - -#define RC_READ_BYTE (*Buffer++) - -#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \ - { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }} - -#ifdef _LZMA_IN_CB - -#define RC_TEST { if (Buffer == BufferLim) \ - { SizeT size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \ - BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }} - -#define RC_INIT Buffer = BufferLim = 0; RC_INIT2 - -#else - -#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; } - -#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2 - -#endif - -#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; } - -#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound) -#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits; -#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits; - -#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \ - { UpdateBit0(p); mi <<= 1; A0; } else \ - { UpdateBit1(p); mi = (mi + mi) + 1; A1; } - -#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;) - -#define RangeDecoderBitTreeDecode(probs, numLevels, res) \ - { int i = numLevels; res = 1; \ - do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \ - res -= (1 << numLevels); } - - -#define kNumPosBitsMax 4 -#define kNumPosStatesMax (1 << kNumPosBitsMax) - -#define kLenNumLowBits 3 -#define kLenNumLowSymbols (1 << kLenNumLowBits) -#define kLenNumMidBits 3 -#define kLenNumMidSymbols (1 << kLenNumMidBits) -#define kLenNumHighBits 8 -#define kLenNumHighSymbols (1 << kLenNumHighBits) - -#define LenChoice 0 -#define LenChoice2 (LenChoice + 1) -#define LenLow (LenChoice2 + 1) -#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) -#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) -#define kNumLenProbs (LenHigh + kLenNumHighSymbols) - - -#define kNumStates 12 -#define kNumLitStates 7 - -#define kStartPosModelIndex 4 -#define kEndPosModelIndex 14 -#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) - -#define kNumPosSlotBits 6 -#define kNumLenToPosStates 4 - -#define kNumAlignBits 4 -#define kAlignTableSize (1 << kNumAlignBits) - -#define kMatchMinLen 2 - -#define IsMatch 0 -#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) -#define IsRepG0 (IsRep + kNumStates) -#define IsRepG1 (IsRepG0 + kNumStates) -#define IsRepG2 (IsRepG1 + kNumStates) -#define IsRep0Long (IsRepG2 + kNumStates) -#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) -#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) -#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) -#define LenCoder (Align + kAlignTableSize) -#define RepLenCoder (LenCoder + kNumLenProbs) -#define Literal (RepLenCoder + kNumLenProbs) - -#if Literal != LZMA_BASE_SIZE -StopCompilingDueBUG -#endif - -int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size) -{ - unsigned char prop0; - if (size < LZMA_PROPERTIES_SIZE) - return LZMA_RESULT_DATA_ERROR; - prop0 = propsData[0]; - if (prop0 >= (9 * 5 * 5)) - return LZMA_RESULT_DATA_ERROR; - { - for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5)); - for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9); - propsRes->lc = prop0; - /* - unsigned char remainder = (unsigned char)(prop0 / 9); - propsRes->lc = prop0 % 9; - propsRes->pb = remainder / 5; - propsRes->lp = remainder % 5; - */ - } - - #ifdef _LZMA_OUT_READ - { - int i; - propsRes->DictionarySize = 0; - for (i = 0; i < 4; i++) - propsRes->DictionarySize += (UInt32)(propsData[1 + i]) << (i * 8); - if (propsRes->DictionarySize == 0) - propsRes->DictionarySize = 1; - } - #endif - return LZMA_RESULT_OK; -} - -#define kLzmaStreamWasFinishedId (-1) - -int LzmaDecode(CLzmaDecoderState *vs, - #ifdef _LZMA_IN_CB - ILzmaInCallback *InCallback, - #else - const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, - #endif - unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed) -{ - CProb *p = vs->Probs; - SizeT nowPos = 0; - Byte previousByte = 0; - UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1; - UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1; - int lc = vs->Properties.lc; - - #ifdef _LZMA_OUT_READ - - UInt32 Range = vs->Range; - UInt32 Code = vs->Code; - #ifdef _LZMA_IN_CB - const Byte *Buffer = vs->Buffer; - const Byte *BufferLim = vs->BufferLim; - #else - const Byte *Buffer = inStream; - const Byte *BufferLim = inStream + inSize; - #endif - int state = vs->State; - UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3]; - int len = vs->RemainLen; - UInt32 globalPos = vs->GlobalPos; - UInt32 distanceLimit = vs->DistanceLimit; - - Byte *dictionary = vs->Dictionary; - UInt32 dictionarySize = vs->Properties.DictionarySize; - UInt32 dictionaryPos = vs->DictionaryPos; - - Byte tempDictionary[4]; - - #ifndef _LZMA_IN_CB - *inSizeProcessed = 0; - #endif - *outSizeProcessed = 0; - if (len == kLzmaStreamWasFinishedId) - return LZMA_RESULT_OK; - - if (dictionarySize == 0) - { - dictionary = tempDictionary; - dictionarySize = 1; - tempDictionary[0] = vs->TempDictionary[0]; - } - - if (len == kLzmaNeedInitId) - { - { - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp)); - UInt32 i; - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - rep0 = rep1 = rep2 = rep3 = 1; - state = 0; - globalPos = 0; - distanceLimit = 0; - dictionaryPos = 0; - dictionary[dictionarySize - 1] = 0; - #ifdef _LZMA_IN_CB - RC_INIT; - #else - RC_INIT(inStream, inSize); - #endif - } - len = 0; - } - while(len != 0 && nowPos < outSize) - { - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos]; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - len--; - } - if (dictionaryPos == 0) - previousByte = dictionary[dictionarySize - 1]; - else - previousByte = dictionary[dictionaryPos - 1]; - - #else /* if !_LZMA_OUT_READ */ - - int state = 0; - UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; - int len = 0; - const Byte *Buffer; - const Byte *BufferLim; - UInt32 Range; - UInt32 Code; - - #ifndef _LZMA_IN_CB - *inSizeProcessed = 0; - #endif - *outSizeProcessed = 0; - - { - UInt32 i; - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp)); - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - } - - #ifdef _LZMA_IN_CB - RC_INIT; - #else - RC_INIT(inStream, inSize); - #endif - - #endif /* _LZMA_OUT_READ */ - - while(nowPos < outSize) - { - CProb *prob; - UInt32 bound; - int posState = (int)( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & posStateMask); - - prob = p + IsMatch + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - int symbol = 1; - UpdateBit0(prob) - prob = p + Literal + (LZMA_LIT_SIZE * - ((( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & literalPosMask) << lc) + (previousByte >> (8 - lc)))); - - if (state >= kNumLitStates) - { - int matchByte; - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - matchByte = dictionary[pos]; - #else - matchByte = outStream[nowPos - rep0]; - #endif - do - { - int bit; - CProb *probLit; - matchByte <<= 1; - bit = (matchByte & 0x100); - probLit = prob + 0x100 + bit + symbol; - RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break) - } - while (symbol < 0x100); - } - while (symbol < 0x100) - { - CProb *probLit = prob + symbol; - RC_GET_BIT(probLit, symbol) - } - previousByte = (Byte)symbol; - - outStream[nowPos++] = previousByte; - #ifdef _LZMA_OUT_READ - if (distanceLimit < dictionarySize) - distanceLimit++; - - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #endif - if (state < 4) state = 0; - else if (state < 10) state -= 3; - else state -= 6; - } - else - { - UpdateBit1(prob); - prob = p + IsRep + state; - IfBit0(prob) - { - UpdateBit0(prob); - rep3 = rep2; - rep2 = rep1; - rep1 = rep0; - state = state < kNumLitStates ? 0 : 3; - prob = p + LenCoder; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG0 + state; - IfBit0(prob) - { - UpdateBit0(prob); - prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - #ifdef _LZMA_OUT_READ - UInt32 pos; - #endif - UpdateBit0(prob); - - #ifdef _LZMA_OUT_READ - if (distanceLimit == 0) - #else - if (nowPos == 0) - #endif - return LZMA_RESULT_DATA_ERROR; - - state = state < kNumLitStates ? 9 : 11; - #ifdef _LZMA_OUT_READ - pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - outStream[nowPos++] = previousByte; - #ifdef _LZMA_OUT_READ - if (distanceLimit < dictionarySize) - distanceLimit++; - #endif - - continue; - } - else - { - UpdateBit1(prob); - } - } - else - { - UInt32 distance; - UpdateBit1(prob); - prob = p + IsRepG1 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep1; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG2 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep2; - } - else - { - UpdateBit1(prob); - distance = rep3; - rep3 = rep2; - } - rep2 = rep1; - } - rep1 = rep0; - rep0 = distance; - } - state = state < kNumLitStates ? 8 : 11; - prob = p + RepLenCoder; - } - { - int numBits, offset; - CProb *probLen = prob + LenChoice; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenLow + (posState << kLenNumLowBits); - offset = 0; - numBits = kLenNumLowBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenChoice2; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenMid + (posState << kLenNumMidBits); - offset = kLenNumLowSymbols; - numBits = kLenNumMidBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenHigh; - offset = kLenNumLowSymbols + kLenNumMidSymbols; - numBits = kLenNumHighBits; - } - } - RangeDecoderBitTreeDecode(probLen, numBits, len); - len += offset; - } - - if (state < 4) - { - int posSlot; - state += kNumLitStates; - prob = p + PosSlot + - ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << - kNumPosSlotBits); - RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot); - if (posSlot >= kStartPosModelIndex) - { - int numDirectBits = ((posSlot >> 1) - 1); - rep0 = (2 | ((UInt32)posSlot & 1)); - if (posSlot < kEndPosModelIndex) - { - rep0 <<= numDirectBits; - prob = p + SpecPos + rep0 - posSlot - 1; - } - else - { - numDirectBits -= kNumAlignBits; - do - { - RC_NORMALIZE - Range >>= 1; - rep0 <<= 1; - if (Code >= Range) - { - Code -= Range; - rep0 |= 1; - } - } - while (--numDirectBits != 0); - prob = p + Align; - rep0 <<= kNumAlignBits; - numDirectBits = kNumAlignBits; - } - { - int i = 1; - int mi = 1; - do - { - CProb *prob3 = prob + mi; - RC_GET_BIT2(prob3, mi, ; , rep0 |= i); - i <<= 1; - } - while(--numDirectBits != 0); - } - } - else - rep0 = posSlot; - if (++rep0 == (UInt32)(0)) - { - /* it's for stream version */ - len = kLzmaStreamWasFinishedId; - break; - } - } - - len += kMatchMinLen; - #ifdef _LZMA_OUT_READ - if (rep0 > distanceLimit) - #else - if (rep0 > nowPos) - #endif - return LZMA_RESULT_DATA_ERROR; - - #ifdef _LZMA_OUT_READ - if (dictionarySize - distanceLimit > (UInt32)len) - distanceLimit += len; - else - distanceLimit = dictionarySize; - #endif - - do - { - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - len--; - outStream[nowPos++] = previousByte; - } - while(len != 0 && nowPos < outSize); - } - } - RC_NORMALIZE; - - #ifdef _LZMA_OUT_READ - vs->Range = Range; - vs->Code = Code; - vs->DictionaryPos = dictionaryPos; - vs->GlobalPos = globalPos + (UInt32)nowPos; - vs->DistanceLimit = distanceLimit; - vs->Reps[0] = rep0; - vs->Reps[1] = rep1; - vs->Reps[2] = rep2; - vs->Reps[3] = rep3; - vs->State = state; - vs->RemainLen = len; - vs->TempDictionary[0] = tempDictionary[0]; - #endif - - #ifdef _LZMA_IN_CB - vs->Buffer = Buffer; - vs->BufferLim = BufferLim; - #else - *inSizeProcessed = (SizeT)(Buffer - inStream); - #endif - *outSizeProcessed = nowPos; - return LZMA_RESULT_OK; -} diff --git a/target/linux/ath79/image/lzma-loader/src/LzmaDecode.h b/target/linux/ath79/image/lzma-loader/src/LzmaDecode.h deleted file mode 100644 index 2870eeb..0000000 --- a/target/linux/ath79/image/lzma-loader/src/LzmaDecode.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - LzmaDecode.h - LZMA Decoder interface - - LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this code, expressly permits you to - statically or dynamically link your code (or bind by name) to the - interfaces of this file without subjecting your linked code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#ifndef __LZMADECODE_H -#define __LZMADECODE_H - -#include "LzmaTypes.h" - -/* #define _LZMA_IN_CB */ -/* Use callback for input data */ - -/* #define _LZMA_OUT_READ */ -/* Use read function for output data */ - -/* #define _LZMA_PROB32 */ -/* It can increase speed on some 32-bit CPUs, - but memory usage will be doubled in that case */ - -/* #define _LZMA_LOC_OPT */ -/* Enable local speed optimizations inside code */ - -#ifdef _LZMA_PROB32 -#define CProb UInt32 -#else -#define CProb UInt16 -#endif - -#define LZMA_RESULT_OK 0 -#define LZMA_RESULT_DATA_ERROR 1 - -#ifdef _LZMA_IN_CB -typedef struct _ILzmaInCallback -{ - int (*Read)(void *object, const unsigned char **buffer, SizeT *bufferSize); -} ILzmaInCallback; -#endif - -#define LZMA_BASE_SIZE 1846 -#define LZMA_LIT_SIZE 768 - -#define LZMA_PROPERTIES_SIZE 5 - -typedef struct _CLzmaProperties -{ - int lc; - int lp; - int pb; - #ifdef _LZMA_OUT_READ - UInt32 DictionarySize; - #endif -}CLzmaProperties; - -int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size); - -#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp))) - -#define kLzmaNeedInitId (-2) - -typedef struct _CLzmaDecoderState -{ - CLzmaProperties Properties; - CProb *Probs; - - #ifdef _LZMA_IN_CB - const unsigned char *Buffer; - const unsigned char *BufferLim; - #endif - - #ifdef _LZMA_OUT_READ - unsigned char *Dictionary; - UInt32 Range; - UInt32 Code; - UInt32 DictionaryPos; - UInt32 GlobalPos; - UInt32 DistanceLimit; - UInt32 Reps[4]; - int State; - int RemainLen; - unsigned char TempDictionary[4]; - #endif -} CLzmaDecoderState; - -#ifdef _LZMA_OUT_READ -#define LzmaDecoderInit(vs) { (vs)->RemainLen = kLzmaNeedInitId; } -#endif - -int LzmaDecode(CLzmaDecoderState *vs, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback, - #else - const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, - #endif - unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed); - -#endif diff --git a/target/linux/ath79/image/lzma-loader/src/LzmaTypes.h b/target/linux/ath79/image/lzma-loader/src/LzmaTypes.h deleted file mode 100644 index 9c27290..0000000 --- a/target/linux/ath79/image/lzma-loader/src/LzmaTypes.h +++ /dev/null @@ -1,45 +0,0 @@ -/* -LzmaTypes.h - -Types for LZMA Decoder - -This file written and distributed to public domain by Igor Pavlov. -This file is part of LZMA SDK 4.40 (2006-05-01) -*/ - -#ifndef __LZMATYPES_H -#define __LZMATYPES_H - -#ifndef _7ZIP_BYTE_DEFINED -#define _7ZIP_BYTE_DEFINED -typedef unsigned char Byte; -#endif - -#ifndef _7ZIP_UINT16_DEFINED -#define _7ZIP_UINT16_DEFINED -typedef unsigned short UInt16; -#endif - -#ifndef _7ZIP_UINT32_DEFINED -#define _7ZIP_UINT32_DEFINED -#ifdef _LZMA_UINT32_IS_ULONG -typedef unsigned long UInt32; -#else -typedef unsigned int UInt32; -#endif -#endif - -/* #define _LZMA_NO_SYSTEM_SIZE_T */ -/* You can use it, if you don't want <stddef.h> */ - -#ifndef _7ZIP_SIZET_DEFINED -#define _7ZIP_SIZET_DEFINED -#ifdef _LZMA_NO_SYSTEM_SIZE_T -typedef UInt32 SizeT; -#else -#include <stddef.h> -typedef size_t SizeT; -#endif -#endif - -#endif diff --git a/target/linux/ath79/image/lzma-loader/src/Makefile b/target/linux/ath79/image/lzma-loader/src/Makefile deleted file mode 100644 index 5f10bdb..0000000 --- a/target/linux/ath79/image/lzma-loader/src/Makefile +++ /dev/null @@ -1,106 +0,0 @@ -# -# Makefile for the LZMA compressed kernel loader for -# Atheros AR7XXX/AR9XXX based boards -# -# Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> -# -# Some parts of this file was based on the OpenWrt specific lzma-loader -# for the BCM47xx and ADM5120 based boards: -# Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org) -# Copyright (C) 2005 Mineharu Takahara <mtakahar@yahoo.com> -# Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su> -# -# This program is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License version 2 as published -# by the Free Software Foundation. -# - -LOADADDR := -LZMA_TEXT_START := 0x80a00000 -LOADER_DATA := -BOARD := -FLASH_OFFS := -FLASH_MAX := - -CC := $(CROSS_COMPILE)gcc -LD := $(CROSS_COMPILE)ld -OBJCOPY := $(CROSS_COMPILE)objcopy -OBJDUMP := $(CROSS_COMPILE)objdump - -BIN_FLAGS := -O binary -R .reginfo -R .note -R .comment -R .mdebug \ - -R .MIPS.abiflags -S - -CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \ - -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 \ - -mno-abicalls -fno-pic -ffunction-sections -pipe -mlong-calls \ - -fno-common -ffreestanding -fhonour-copts \ - -mabi=32 -march=mips32r2 \ - -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap -CFLAGS += -D_LZMA_PROB32 - -ASFLAGS = $(CFLAGS) -D__ASSEMBLY__ - -LDFLAGS = -static --gc-sections -no-warn-mismatch -LDFLAGS += -e startup -T loader.lds -Ttext $(LZMA_TEXT_START) - -O_FORMAT = $(shell $(OBJDUMP) -i | head -2 | grep elf32) - -OBJECTS := head.o loader.o cache.o board.o printf.o LzmaDecode.o - -ifneq ($(strip $(LOADER_DATA)),) -OBJECTS += data.o -CFLAGS += -DLZMA_WRAPPER=1 -DLOADADDR=$(LOADADDR) -endif - -ifneq ($(strip $(KERNEL_CMDLINE)),) -CFLAGS += -DCONFIG_KERNEL_CMDLINE='"$(KERNEL_CMDLINE)"' -endif - -ifneq ($(strip $(FLASH_OFFS)),) -CFLAGS += -DCONFIG_FLASH_OFFS=$(FLASH_OFFS) -endif - -ifneq ($(strip $(FLASH_MAX)),) -CFLAGS += -DCONFIG_FLASH_MAX=$(FLASH_MAX) -endif - -BOARD_DEF := $(shell echo $(strip $(BOARD)) | tr a-z A-Z | tr - _) -ifneq ($(BOARD_DEF),) -CFLAGS += -DCONFIG_BOARD_$(BOARD_DEF) -endif - -all: loader.elf - -# Don't build dependencies, this may die if $(CC) isn't gcc -dep: - -install: - -%.o : %.c - $(CC) $(CFLAGS) -c -o $@ $< - -%.o : %.S - $(CC) $(ASFLAGS) -c -o $@ $< - -data.o: $(LOADER_DATA) - $(LD) -r -b binary --oformat $(O_FORMAT) -T lzma-data.lds -o $@ $< - -loader: $(OBJECTS) - $(LD) $(LDFLAGS) -o $@ $(OBJECTS) - -loader.bin: loader - $(OBJCOPY) $(BIN_FLAGS) $< $@ - -loader2.o: loader.bin - $(LD) -r -b binary --oformat $(O_FORMAT) -o $@ $< - -loader.elf: loader2.o - $(LD) -e startup -T loader2.lds -Ttext $(LOADADDR) -o $@ $< - -mrproper: clean - -clean: - rm -f loader *.elf *.bin *.o - - - diff --git a/target/linux/ath79/image/lzma-loader/src/ar71xx_regs.h b/target/linux/ath79/image/lzma-loader/src/ar71xx_regs.h deleted file mode 100644 index 19a4785..0000000 --- a/target/linux/ath79/image/lzma-loader/src/ar71xx_regs.h +++ /dev/null @@ -1,725 +0,0 @@ -/* - * Atheros AR71XX/AR724X/AR913X SoC register definitions - * - * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef __ASM_MACH_AR71XX_REGS_H -#define __ASM_MACH_AR71XX_REGS_H - -#define BIT(_x) (1UL << (_x)) - -#define AR71XX_APB_BASE 0x18000000 -#define AR71XX_GE0_BASE 0x19000000 -#define AR71XX_GE0_SIZE 0x10000 -#define AR71XX_GE1_BASE 0x1a000000 -#define AR71XX_GE1_SIZE 0x10000 -#define AR71XX_EHCI_BASE 0x1b000000 -#define AR71XX_EHCI_SIZE 0x1000 -#define AR71XX_OHCI_BASE 0x1c000000 -#define AR71XX_OHCI_SIZE 0x1000 -#define AR71XX_SPI_BASE 0x1f000000 -#define AR71XX_SPI_SIZE 0x01000000 - -#define AR71XX_DDR_CTRL_BASE (AR71XX_APB_BASE + 0x00000000) -#define AR71XX_DDR_CTRL_SIZE 0x100 -#define AR71XX_UART_BASE (AR71XX_APB_BASE + 0x00020000) -#define AR71XX_UART_SIZE 0x100 -#define AR71XX_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) -#define AR71XX_USB_CTRL_SIZE 0x100 -#define AR71XX_GPIO_BASE (AR71XX_APB_BASE + 0x00040000) -#define AR71XX_GPIO_SIZE 0x100 -#define AR71XX_PLL_BASE (AR71XX_APB_BASE + 0x00050000) -#define AR71XX_PLL_SIZE 0x100 -#define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000) -#define AR71XX_RESET_SIZE 0x100 -#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000) -#define AR71XX_MII_SIZE 0x100 - -#define AR71XX_PCI_MEM_BASE 0x10000000 -#define AR71XX_PCI_MEM_SIZE 0x07000000 - -#define AR71XX_PCI_WIN0_OFFS 0x10000000 -#define AR71XX_PCI_WIN1_OFFS 0x11000000 -#define AR71XX_PCI_WIN2_OFFS 0x12000000 -#define AR71XX_PCI_WIN3_OFFS 0x13000000 -#define AR71XX_PCI_WIN4_OFFS 0x14000000 -#define AR71XX_PCI_WIN5_OFFS 0x15000000 -#define AR71XX_PCI_WIN6_OFFS 0x16000000 -#define AR71XX_PCI_WIN7_OFFS 0x07000000 - -#define AR71XX_PCI_CFG_BASE \ - (AR71XX_PCI_MEM_BASE + AR71XX_PCI_WIN7_OFFS + 0x10000) -#define AR71XX_PCI_CFG_SIZE 0x100 - -#define AR7240_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) -#define AR7240_USB_CTRL_SIZE 0x100 -#define AR7240_OHCI_BASE 0x1b000000 -#define AR7240_OHCI_SIZE 0x1000 - -#define AR724X_PCI_MEM_BASE 0x10000000 -#define AR724X_PCI_MEM_SIZE 0x04000000 - -#define AR724X_PCI_CFG_BASE 0x14000000 -#define AR724X_PCI_CFG_SIZE 0x1000 -#define AR724X_PCI_CRP_BASE (AR71XX_APB_BASE + 0x000c0000) -#define AR724X_PCI_CRP_SIZE 0x1000 -#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000f0000) -#define AR724X_PCI_CTRL_SIZE 0x100 - -#define AR724X_EHCI_BASE 0x1b000000 -#define AR724X_EHCI_SIZE 0x1000 - -#define AR913X_EHCI_BASE 0x1b000000 -#define AR913X_EHCI_SIZE 0x1000 -#define AR913X_WMAC_BASE (AR71XX_APB_BASE + 0x000C0000) -#define AR913X_WMAC_SIZE 0x30000 - -#define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000) -#define AR933X_UART_SIZE 0x14 -#define AR933X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -#define AR933X_GMAC_SIZE 0x04 -#define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) -#define AR933X_WMAC_SIZE 0x20000 -#define AR933X_EHCI_BASE 0x1b000000 -#define AR933X_EHCI_SIZE 0x1000 - -#define AR934X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -#define AR934X_GMAC_SIZE 0x14 -#define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) -#define AR934X_WMAC_SIZE 0x20000 -#define AR934X_EHCI_BASE 0x1b000000 -#define AR934X_EHCI_SIZE 0x200 - -#define QCA955X_PCI_MEM_BASE0 0x10000000 -#define QCA955X_PCI_MEM_BASE1 0x12000000 -#define QCA955X_PCI_MEM_SIZE 0x02000000 -#define QCA955X_PCI_CFG_BASE0 0x14000000 -#define QCA955X_PCI_CFG_BASE1 0x16000000 -#define QCA955X_PCI_CFG_SIZE 0x1000 -#define QCA955X_PCI_CRP_BASE0 (AR71XX_APB_BASE + 0x000c0000) -#define QCA955X_PCI_CRP_BASE1 (AR71XX_APB_BASE + 0x00250000) -#define QCA955X_PCI_CRP_SIZE 0x1000 -#define QCA955X_PCI_CTRL_BASE0 (AR71XX_APB_BASE + 0x000f0000) -#define QCA955X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000) -#define QCA955X_PCI_CTRL_SIZE 0x100 - -#define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) -#define QCA955X_WMAC_SIZE 0x20000 -#define QCA955X_EHCI0_BASE 0x1b000000 -#define QCA955X_EHCI1_BASE 0x1b400000 -#define QCA955X_EHCI_SIZE 0x1000 -#define QCA955X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -#define QCA955X_GMAC_SIZE 0x40 - -#define AR9300_OTP_BASE 0x14000 -#define AR9300_OTP_STATUS 0x15f18 -#define AR9300_OTP_STATUS_TYPE 0x7 -#define AR9300_OTP_STATUS_VALID 0x4 -#define AR9300_OTP_STATUS_ACCESS_BUSY 0x2 -#define AR9300_OTP_STATUS_SM_BUSY 0x1 -#define AR9300_OTP_READ_DATA 0x15f1c - -/* - * DDR_CTRL block - */ -#define AR71XX_DDR_REG_PCI_WIN0 0x7c -#define AR71XX_DDR_REG_PCI_WIN1 0x80 -#define AR71XX_DDR_REG_PCI_WIN2 0x84 -#define AR71XX_DDR_REG_PCI_WIN3 0x88 -#define AR71XX_DDR_REG_PCI_WIN4 0x8c -#define AR71XX_DDR_REG_PCI_WIN5 0x90 -#define AR71XX_DDR_REG_PCI_WIN6 0x94 -#define AR71XX_DDR_REG_PCI_WIN7 0x98 -#define AR71XX_DDR_REG_FLUSH_GE0 0x9c -#define AR71XX_DDR_REG_FLUSH_GE1 0xa0 -#define AR71XX_DDR_REG_FLUSH_USB 0xa4 -#define AR71XX_DDR_REG_FLUSH_PCI 0xa8 - -#define AR724X_DDR_REG_FLUSH_GE0 0x7c -#define AR724X_DDR_REG_FLUSH_GE1 0x80 -#define AR724X_DDR_REG_FLUSH_USB 0x84 -#define AR724X_DDR_REG_FLUSH_PCIE 0x88 - -#define AR913X_DDR_REG_FLUSH_GE0 0x7c -#define AR913X_DDR_REG_FLUSH_GE1 0x80 -#define AR913X_DDR_REG_FLUSH_USB 0x84 -#define AR913X_DDR_REG_FLUSH_WMAC 0x88 - -#define AR933X_DDR_REG_FLUSH_GE0 0x7c -#define AR933X_DDR_REG_FLUSH_GE1 0x80 -#define AR933X_DDR_REG_FLUSH_USB 0x84 -#define AR933X_DDR_REG_FLUSH_WMAC 0x88 - -#define AR934X_DDR_REG_FLUSH_GE0 0x9c -#define AR934X_DDR_REG_FLUSH_GE1 0xa0 -#define AR934X_DDR_REG_FLUSH_USB 0xa4 -#define AR934X_DDR_REG_FLUSH_PCIE 0xa8 -#define AR934X_DDR_REG_FLUSH_WMAC 0xac - -/* - * PLL block - */ -#define AR71XX_PLL_REG_CPU_CONFIG 0x00 -#define AR71XX_PLL_REG_SEC_CONFIG 0x04 -#define AR71XX_PLL_REG_ETH0_INT_CLOCK 0x10 -#define AR71XX_PLL_REG_ETH1_INT_CLOCK 0x14 - -#define AR71XX_PLL_DIV_SHIFT 3 -#define AR71XX_PLL_DIV_MASK 0x1f -#define AR71XX_CPU_DIV_SHIFT 16 -#define AR71XX_CPU_DIV_MASK 0x3 -#define AR71XX_DDR_DIV_SHIFT 18 -#define AR71XX_DDR_DIV_MASK 0x3 -#define AR71XX_AHB_DIV_SHIFT 20 -#define AR71XX_AHB_DIV_MASK 0x7 - -#define AR71XX_ETH0_PLL_SHIFT 17 -#define AR71XX_ETH1_PLL_SHIFT 19 - -#define AR724X_PLL_REG_CPU_CONFIG 0x00 -#define AR724X_PLL_REG_PCIE_CONFIG 0x18 - -#define AR724X_PLL_DIV_SHIFT 0 -#define AR724X_PLL_DIV_MASK 0x3ff -#define AR724X_PLL_REF_DIV_SHIFT 10 -#define AR724X_PLL_REF_DIV_MASK 0xf -#define AR724X_AHB_DIV_SHIFT 19 -#define AR724X_AHB_DIV_MASK 0x1 -#define AR724X_DDR_DIV_SHIFT 22 -#define AR724X_DDR_DIV_MASK 0x3 - -#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c - -#define AR913X_PLL_REG_CPU_CONFIG 0x00 -#define AR913X_PLL_REG_ETH_CONFIG 0x04 -#define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14 -#define AR913X_PLL_REG_ETH1_INT_CLOCK 0x18 - -#define AR913X_PLL_DIV_SHIFT 0 -#define AR913X_PLL_DIV_MASK 0x3ff -#define AR913X_DDR_DIV_SHIFT 22 -#define AR913X_DDR_DIV_MASK 0x3 -#define AR913X_AHB_DIV_SHIFT 19 -#define AR913X_AHB_DIV_MASK 0x1 - -#define AR913X_ETH0_PLL_SHIFT 20 -#define AR913X_ETH1_PLL_SHIFT 22 - -#define AR933X_PLL_CPU_CONFIG_REG 0x00 -#define AR933X_PLL_CLOCK_CTRL_REG 0x08 - -#define AR933X_PLL_CPU_CONFIG_NINT_SHIFT 10 -#define AR933X_PLL_CPU_CONFIG_NINT_MASK 0x3f -#define AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT 16 -#define AR933X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f -#define AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT 23 -#define AR933X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7 - -#define AR933X_PLL_CLOCK_CTRL_BYPASS BIT(2) -#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT 5 -#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK 0x3 -#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT 10 -#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK 0x3 -#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT 15 -#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK 0x7 - -#define AR934X_PLL_CPU_CONFIG_REG 0x00 -#define AR934X_PLL_DDR_CONFIG_REG 0x04 -#define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08 -#define AR934X_PLL_ETH_XMII_CONTROL_REG 0x2c - -#define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 -#define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f -#define AR934X_PLL_CPU_CONFIG_NINT_SHIFT 6 -#define AR934X_PLL_CPU_CONFIG_NINT_MASK 0x3f -#define AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT 12 -#define AR934X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f -#define AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19 -#define AR934X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3 - -#define AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT 0 -#define AR934X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff -#define AR934X_PLL_DDR_CONFIG_NINT_SHIFT 10 -#define AR934X_PLL_DDR_CONFIG_NINT_MASK 0x3f -#define AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT 16 -#define AR934X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f -#define AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23 -#define AR934X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7 - -#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS BIT(2) -#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS BIT(3) -#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS BIT(4) -#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT 5 -#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK 0x1f -#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SHIFT 10 -#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK 0x1f -#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SHIFT 15 -#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK 0x1f -#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20) -#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) -#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) - -#define QCA955X_PLL_CPU_CONFIG_REG 0x00 -#define QCA955X_PLL_DDR_CONFIG_REG 0x04 -#define QCA955X_PLL_CLK_CTRL_REG 0x08 - -#define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 -#define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f -#define QCA955X_PLL_CPU_CONFIG_NINT_SHIFT 6 -#define QCA955X_PLL_CPU_CONFIG_NINT_MASK 0x3f -#define QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT 12 -#define QCA955X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f -#define QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19 -#define QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3 - -#define QCA955X_PLL_DDR_CONFIG_NFRAC_SHIFT 0 -#define QCA955X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff -#define QCA955X_PLL_DDR_CONFIG_NINT_SHIFT 10 -#define QCA955X_PLL_DDR_CONFIG_NINT_MASK 0x3f -#define QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT 16 -#define QCA955X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f -#define QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23 -#define QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7 - -#define QCA955X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2) -#define QCA955X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3) -#define QCA955X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4) -#define QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5 -#define QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f -#define QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10 -#define QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f -#define QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15 -#define QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f -#define QCA955X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20) -#define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) -#define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) - -/* - * USB_CONFIG block - */ -#define AR71XX_USB_CTRL_REG_FLADJ 0x00 -#define AR71XX_USB_CTRL_REG_CONFIG 0x04 - -/* - * RESET block - */ -#define AR71XX_RESET_REG_TIMER 0x00 -#define AR71XX_RESET_REG_TIMER_RELOAD 0x04 -#define AR71XX_RESET_REG_WDOG_CTRL 0x08 -#define AR71XX_RESET_REG_WDOG 0x0c -#define AR71XX_RESET_REG_MISC_INT_STATUS 0x10 -#define AR71XX_RESET_REG_MISC_INT_ENABLE 0x14 -#define AR71XX_RESET_REG_PCI_INT_STATUS 0x18 -#define AR71XX_RESET_REG_PCI_INT_ENABLE 0x1c -#define AR71XX_RESET_REG_GLOBAL_INT_STATUS 0x20 -#define AR71XX_RESET_REG_RESET_MODULE 0x24 -#define AR71XX_RESET_REG_PERFC_CTRL 0x2c -#define AR71XX_RESET_REG_PERFC0 0x30 -#define AR71XX_RESET_REG_PERFC1 0x34 -#define AR71XX_RESET_REG_REV_ID 0x90 - -#define AR913X_RESET_REG_GLOBAL_INT_STATUS 0x18 -#define AR913X_RESET_REG_RESET_MODULE 0x1c -#define AR913X_RESET_REG_PERF_CTRL 0x20 -#define AR913X_RESET_REG_PERFC0 0x24 -#define AR913X_RESET_REG_PERFC1 0x28 - -#define AR724X_RESET_REG_RESET_MODULE 0x1c - -#define AR933X_RESET_REG_RESET_MODULE 0x1c -#define AR933X_RESET_REG_BOOTSTRAP 0xac - -#define AR934X_RESET_REG_RESET_MODULE 0x1c -#define AR934X_RESET_REG_BOOTSTRAP 0xb0 -#define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac - -#define QCA955X_RESET_REG_BOOTSTRAP 0xb0 -#define QCA955X_RESET_REG_EXT_INT_STATUS 0xac - -#define MISC_INT_ETHSW BIT(12) -#define MISC_INT_TIMER4 BIT(10) -#define MISC_INT_TIMER3 BIT(9) -#define MISC_INT_TIMER2 BIT(8) -#define MISC_INT_DMA BIT(7) -#define MISC_INT_OHCI BIT(6) -#define MISC_INT_PERFC BIT(5) -#define MISC_INT_WDOG BIT(4) -#define MISC_INT_UART BIT(3) -#define MISC_INT_GPIO BIT(2) -#define MISC_INT_ERROR BIT(1) -#define MISC_INT_TIMER BIT(0) - -#define AR71XX_RESET_EXTERNAL BIT(28) -#define AR71XX_RESET_FULL_CHIP BIT(24) -#define AR71XX_RESET_CPU_NMI BIT(21) -#define AR71XX_RESET_CPU_COLD BIT(20) -#define AR71XX_RESET_DMA BIT(19) -#define AR71XX_RESET_SLIC BIT(18) -#define AR71XX_RESET_STEREO BIT(17) -#define AR71XX_RESET_DDR BIT(16) -#define AR71XX_RESET_GE1_MAC BIT(13) -#define AR71XX_RESET_GE1_PHY BIT(12) -#define AR71XX_RESET_USBSUS_OVERRIDE BIT(10) -#define AR71XX_RESET_GE0_MAC BIT(9) -#define AR71XX_RESET_GE0_PHY BIT(8) -#define AR71XX_RESET_USB_OHCI_DLL BIT(6) -#define AR71XX_RESET_USB_HOST BIT(5) -#define AR71XX_RESET_USB_PHY BIT(4) -#define AR71XX_RESET_PCI_BUS BIT(1) -#define AR71XX_RESET_PCI_CORE BIT(0) - -#define AR7240_RESET_USB_HOST BIT(5) -#define AR7240_RESET_OHCI_DLL BIT(3) - -#define AR724X_RESET_GE1_MDIO BIT(23) -#define AR724X_RESET_GE0_MDIO BIT(22) -#define AR724X_RESET_PCIE_PHY_SERIAL BIT(10) -#define AR724X_RESET_PCIE_PHY BIT(7) -#define AR724X_RESET_PCIE BIT(6) -#define AR724X_RESET_USB_HOST BIT(5) -#define AR724X_RESET_USB_PHY BIT(4) -#define AR724X_RESET_USBSUS_OVERRIDE BIT(3) - -#define AR913X_RESET_AMBA2WMAC BIT(22) -#define AR913X_RESET_USBSUS_OVERRIDE BIT(10) -#define AR913X_RESET_USB_HOST BIT(5) -#define AR913X_RESET_USB_PHY BIT(4) - -#define AR933X_RESET_GE1_MDIO BIT(23) -#define AR933X_RESET_GE0_MDIO BIT(22) -#define AR933X_RESET_GE1_MAC BIT(13) -#define AR933X_RESET_WMAC BIT(11) -#define AR933X_RESET_GE0_MAC BIT(9) -#define AR933X_RESET_USB_HOST BIT(5) -#define AR933X_RESET_USB_PHY BIT(4) -#define AR933X_RESET_USBSUS_OVERRIDE BIT(3) - -#define AR934X_RESET_HOST BIT(31) -#define AR934X_RESET_SLIC BIT(30) -#define AR934X_RESET_HDMA BIT(29) -#define AR934X_RESET_EXTERNAL BIT(28) -#define AR934X_RESET_RTC BIT(27) -#define AR934X_RESET_PCIE_EP_INT BIT(26) -#define AR934X_RESET_CHKSUM_ACC BIT(25) -#define AR934X_RESET_FULL_CHIP BIT(24) -#define AR934X_RESET_GE1_MDIO BIT(23) -#define AR934X_RESET_GE0_MDIO BIT(22) -#define AR934X_RESET_CPU_NMI BIT(21) -#define AR934X_RESET_CPU_COLD BIT(20) -#define AR934X_RESET_HOST_RESET_INT BIT(19) -#define AR934X_RESET_PCIE_EP BIT(18) -#define AR934X_RESET_UART1 BIT(17) -#define AR934X_RESET_DDR BIT(16) -#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15) -#define AR934X_RESET_NANDF BIT(14) -#define AR934X_RESET_GE1_MAC BIT(13) -#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12) -#define AR934X_RESET_USB_PHY_ANALOG BIT(11) -#define AR934X_RESET_HOST_DMA_INT BIT(10) -#define AR934X_RESET_GE0_MAC BIT(9) -#define AR934X_RESET_ETH_SWITCH BIT(8) -#define AR934X_RESET_PCIE_PHY BIT(7) -#define AR934X_RESET_PCIE BIT(6) -#define AR934X_RESET_USB_HOST BIT(5) -#define AR934X_RESET_USB_PHY BIT(4) -#define AR934X_RESET_USBSUS_OVERRIDE BIT(3) -#define AR934X_RESET_LUT BIT(2) -#define AR934X_RESET_MBOX BIT(1) -#define AR934X_RESET_I2S BIT(0) - -#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18) -#define AR933X_BOOTSTRAP_EEPBUSY BIT(4) -#define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) - -#define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23) -#define AR934X_BOOTSTRAP_SW_OPTION7 BIT(22) -#define AR934X_BOOTSTRAP_SW_OPTION6 BIT(21) -#define AR934X_BOOTSTRAP_SW_OPTION5 BIT(20) -#define AR934X_BOOTSTRAP_SW_OPTION4 BIT(19) -#define AR934X_BOOTSTRAP_SW_OPTION3 BIT(18) -#define AR934X_BOOTSTRAP_SW_OPTION2 BIT(17) -#define AR934X_BOOTSTRAP_SW_OPTION1 BIT(16) -#define AR934X_BOOTSTRAP_USB_MODE_DEVICE BIT(7) -#define AR934X_BOOTSTRAP_PCIE_RC BIT(6) -#define AR934X_BOOTSTRAP_EJTAG_MODE BIT(5) -#define AR934X_BOOTSTRAP_REF_CLK_40 BIT(4) -#define AR934X_BOOTSTRAP_BOOT_FROM_SPI BIT(2) -#define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1) -#define AR934X_BOOTSTRAP_DDR1 BIT(0) - -#define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4) - -#define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0) -#define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1) -#define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2) -#define AR934X_PCIE_WMAC_INT_WMAC_RXHP BIT(3) -#define AR934X_PCIE_WMAC_INT_PCIE_RC BIT(4) -#define AR934X_PCIE_WMAC_INT_PCIE_RC0 BIT(5) -#define AR934X_PCIE_WMAC_INT_PCIE_RC1 BIT(6) -#define AR934X_PCIE_WMAC_INT_PCIE_RC2 BIT(7) -#define AR934X_PCIE_WMAC_INT_PCIE_RC3 BIT(8) -#define AR934X_PCIE_WMAC_INT_WMAC_ALL \ - (AR934X_PCIE_WMAC_INT_WMAC_MISC | AR934X_PCIE_WMAC_INT_WMAC_TX | \ - AR934X_PCIE_WMAC_INT_WMAC_RXLP | AR934X_PCIE_WMAC_INT_WMAC_RXHP) - -#define AR934X_PCIE_WMAC_INT_PCIE_ALL \ - (AR934X_PCIE_WMAC_INT_PCIE_RC | AR934X_PCIE_WMAC_INT_PCIE_RC0 | \ - AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \ - AR934X_PCIE_WMAC_INT_PCIE_RC3) - -#define QCA955X_EXT_INT_WMAC_MISC BIT(0) -#define QCA955X_EXT_INT_WMAC_TX BIT(1) -#define QCA955X_EXT_INT_WMAC_RXLP BIT(2) -#define QCA955X_EXT_INT_WMAC_RXHP BIT(3) -#define QCA955X_EXT_INT_PCIE_RC1 BIT(4) -#define QCA955X_EXT_INT_PCIE_RC1_INT0 BIT(5) -#define QCA955X_EXT_INT_PCIE_RC1_INT1 BIT(6) -#define QCA955X_EXT_INT_PCIE_RC1_INT2 BIT(7) -#define QCA955X_EXT_INT_PCIE_RC1_INT3 BIT(8) -#define QCA955X_EXT_INT_PCIE_RC2 BIT(12) -#define QCA955X_EXT_INT_PCIE_RC2_INT0 BIT(13) -#define QCA955X_EXT_INT_PCIE_RC2_INT1 BIT(14) -#define QCA955X_EXT_INT_PCIE_RC2_INT2 BIT(15) -#define QCA955X_EXT_INT_PCIE_RC2_INT3 BIT(16) -#define QCA955X_EXT_INT_USB1 BIT(24) -#define QCA955X_EXT_INT_USB2 BIT(28) - -#define QCA955X_EXT_INT_WMAC_ALL \ - (QCA955X_EXT_INT_WMAC_MISC | QCA955X_EXT_INT_WMAC_TX | \ - QCA955X_EXT_INT_WMAC_RXLP | QCA955X_EXT_INT_WMAC_RXHP) - -#define QCA955X_EXT_INT_PCIE_RC1_ALL \ - (QCA955X_EXT_INT_PCIE_RC1 | QCA955X_EXT_INT_PCIE_RC1_INT0 | \ - QCA955X_EXT_INT_PCIE_RC1_INT1 | QCA955X_EXT_INT_PCIE_RC1_INT2 | \ - QCA955X_EXT_INT_PCIE_RC1_INT3) - -#define QCA955X_EXT_INT_PCIE_RC2_ALL \ - (QCA955X_EXT_INT_PCIE_RC2 | QCA955X_EXT_INT_PCIE_RC2_INT0 | \ - QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \ - QCA955X_EXT_INT_PCIE_RC2_INT3) - -#define REV_ID_MAJOR_MASK 0xfff0 -#define REV_ID_MAJOR_AR71XX 0x00a0 -#define REV_ID_MAJOR_AR913X 0x00b0 -#define REV_ID_MAJOR_AR7240 0x00c0 -#define REV_ID_MAJOR_AR7241 0x0100 -#define REV_ID_MAJOR_AR7242 0x1100 -#define REV_ID_MAJOR_AR9330 0x0110 -#define REV_ID_MAJOR_AR9331 0x1110 -#define REV_ID_MAJOR_AR9341 0x0120 -#define REV_ID_MAJOR_AR9342 0x1120 -#define REV_ID_MAJOR_AR9344 0x2120 -#define REV_ID_MAJOR_QCA9558 0x1130 - -#define AR71XX_REV_ID_MINOR_MASK 0x3 -#define AR71XX_REV_ID_MINOR_AR7130 0x0 -#define AR71XX_REV_ID_MINOR_AR7141 0x1 -#define AR71XX_REV_ID_MINOR_AR7161 0x2 -#define AR71XX_REV_ID_REVISION_MASK 0x3 -#define AR71XX_REV_ID_REVISION_SHIFT 2 - -#define AR913X_REV_ID_MINOR_MASK 0x3 -#define AR913X_REV_ID_MINOR_AR9130 0x0 -#define AR913X_REV_ID_MINOR_AR9132 0x1 -#define AR913X_REV_ID_REVISION_MASK 0x3 -#define AR913X_REV_ID_REVISION_SHIFT 2 - -#define AR933X_REV_ID_REVISION_MASK 0x3 - -#define AR724X_REV_ID_REVISION_MASK 0x3 - -#define AR934X_REV_ID_REVISION_MASK 0xf - -#define AR944X_REV_ID_REVISION_MASK 0xf - -/* - * SPI block - */ -#define AR71XX_SPI_REG_FS 0x00 /* Function Select */ -#define AR71XX_SPI_REG_CTRL 0x04 /* SPI Control */ -#define AR71XX_SPI_REG_IOC 0x08 /* SPI I/O Control */ -#define AR71XX_SPI_REG_RDS 0x0c /* Read Data Shift */ - -#define AR71XX_SPI_FS_GPIO BIT(0) /* Enable GPIO mode */ - -#define AR71XX_SPI_CTRL_RD BIT(6) /* Remap Disable */ -#define AR71XX_SPI_CTRL_DIV_MASK 0x3f - -#define AR71XX_SPI_IOC_DO BIT(0) /* Data Out pin */ -#define AR71XX_SPI_IOC_CLK BIT(8) /* CLK pin */ -#define AR71XX_SPI_IOC_CS(n) BIT(16 + (n)) -#define AR71XX_SPI_IOC_CS0 AR71XX_SPI_IOC_CS(0) -#define AR71XX_SPI_IOC_CS1 AR71XX_SPI_IOC_CS(1) -#define AR71XX_SPI_IOC_CS2 AR71XX_SPI_IOC_CS(2) -#define AR71XX_SPI_IOC_CS_ALL (AR71XX_SPI_IOC_CS0 | AR71XX_SPI_IOC_CS1 | \ - AR71XX_SPI_IOC_CS2) - -/* - * GPIO block - */ -#define AR71XX_GPIO_REG_OE 0x00 -#define AR71XX_GPIO_REG_IN 0x04 -#define AR71XX_GPIO_REG_OUT 0x08 -#define AR71XX_GPIO_REG_SET 0x0c -#define AR71XX_GPIO_REG_CLEAR 0x10 -#define AR71XX_GPIO_REG_INT_MODE 0x14 -#define AR71XX_GPIO_REG_INT_TYPE 0x18 -#define AR71XX_GPIO_REG_INT_POLARITY 0x1c -#define AR71XX_GPIO_REG_INT_PENDING 0x20 -#define AR71XX_GPIO_REG_INT_ENABLE 0x24 -#define AR71XX_GPIO_REG_FUNC 0x28 - -#define AR934X_GPIO_REG_OUT_FUNC0 0x2c -#define AR934X_GPIO_REG_OUT_FUNC1 0x30 -#define AR934X_GPIO_REG_OUT_FUNC2 0x34 -#define AR934X_GPIO_REG_OUT_FUNC3 0x38 -#define AR934X_GPIO_REG_OUT_FUNC4 0x3c -#define AR934X_GPIO_REG_OUT_FUNC5 0x40 -#define AR934X_GPIO_REG_FUNC 0x6c - -#define AR71XX_GPIO_COUNT 16 -#define AR724X_GPIO_COUNT 18 -#define AR913X_GPIO_COUNT 22 -#define AR933X_GPIO_COUNT 30 -#define AR934X_GPIO_COUNT 23 -#define QCA955X_GPIO_COUNT 24 - -#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17) -#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16) -#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13) -#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12) -#define AR71XX_GPIO_FUNC_UART_EN BIT(8) -#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4) -#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0) - -#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19) -#define AR724X_GPIO_FUNC_SPI_EN BIT(18) -#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14) -#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13) -#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12) -#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11) -#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10) -#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9) -#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8) -#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) -#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) -#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) -#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) -#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) -#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) -#define AR724X_GPIO_FUNC_UART_EN BIT(1) -#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0) - -#define AR913X_GPIO_FUNC_WMAC_LED_EN BIT(22) -#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN BIT(21) -#define AR913X_GPIO_FUNC_I2S_REFCLKEN BIT(20) -#define AR913X_GPIO_FUNC_I2S_MCKEN BIT(19) -#define AR913X_GPIO_FUNC_I2S1_EN BIT(18) -#define AR913X_GPIO_FUNC_I2S0_EN BIT(17) -#define AR913X_GPIO_FUNC_SLIC_EN BIT(16) -#define AR913X_GPIO_FUNC_UART_RTSCTS_EN BIT(9) -#define AR913X_GPIO_FUNC_UART_EN BIT(8) -#define AR913X_GPIO_FUNC_USB_CLK_EN BIT(4) - -#define AR933X_GPIO_FUNC_SPDIF2TCK BIT(31) -#define AR933X_GPIO_FUNC_SPDIF_EN BIT(30) -#define AR933X_GPIO_FUNC_I2SO_22_18_EN BIT(29) -#define AR933X_GPIO_FUNC_I2S_MCK_EN BIT(27) -#define AR933X_GPIO_FUNC_I2SO_EN BIT(26) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL BIT(25) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL BIT(24) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT BIT(23) -#define AR933X_GPIO_FUNC_SPI_EN BIT(18) -#define AR933X_GPIO_FUNC_SPI_CS_EN2 BIT(14) -#define AR933X_GPIO_FUNC_SPI_CS_EN1 BIT(13) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) -#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) -#define AR933X_GPIO_FUNC_UART_EN BIT(1) -#define AR933X_GPIO_FUNC_JTAG_DISABLE BIT(0) - -#define AR934X_GPIO_FUNC_DDR_DQOE_EN BIT(17) -#define AR934X_GPIO_FUNC_SPI_CS_1_EN BIT(14) -#define AR934X_GPIO_FUNC_SPI_CS_0_EN BIT(13) - -#define AR934X_GPIO_OUT_GPIO 0x00 - -/* - * MII_CTRL block - */ -#define AR71XX_MII_REG_MII0_CTRL 0x00 -#define AR71XX_MII_REG_MII1_CTRL 0x04 - -#define AR71XX_MII_CTRL_IF_MASK 3 -#define AR71XX_MII_CTRL_SPEED_SHIFT 4 -#define AR71XX_MII_CTRL_SPEED_MASK 3 -#define AR71XX_MII_CTRL_SPEED_10 0 -#define AR71XX_MII_CTRL_SPEED_100 1 -#define AR71XX_MII_CTRL_SPEED_1000 2 - -#define AR71XX_MII0_CTRL_IF_GMII 0 -#define AR71XX_MII0_CTRL_IF_MII 1 -#define AR71XX_MII0_CTRL_IF_RGMII 2 -#define AR71XX_MII0_CTRL_IF_RMII 3 - -#define AR71XX_MII1_CTRL_IF_RGMII 0 -#define AR71XX_MII1_CTRL_IF_RMII 1 - -/* - * AR933X GMAC interface - */ -#define AR933X_GMAC_REG_ETH_CFG 0x00 - -#define AR933X_ETH_CFG_RGMII_GE0 BIT(0) -#define AR933X_ETH_CFG_MII_GE0 BIT(1) -#define AR933X_ETH_CFG_GMII_GE0 BIT(2) -#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3) -#define AR933X_ETH_CFG_MII_GE0_SLAVE BIT(4) -#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5) -#define AR933X_ETH_CFG_SW_PHY_SWAP BIT(7) -#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8) -#define AR933X_ETH_CFG_RMII_GE0 BIT(9) -#define AR933X_ETH_CFG_RMII_GE0_SPD_10 0 -#define AR933X_ETH_CFG_RMII_GE0_SPD_100 BIT(10) - -/* - * AR934X GMAC Interface - */ -#define AR934X_GMAC_REG_ETH_CFG 0x00 - -#define AR934X_ETH_CFG_RGMII_GMAC0 BIT(0) -#define AR934X_ETH_CFG_MII_GMAC0 BIT(1) -#define AR934X_ETH_CFG_GMII_GMAC0 BIT(2) -#define AR934X_ETH_CFG_MII_GMAC0_MASTER BIT(3) -#define AR934X_ETH_CFG_MII_GMAC0_SLAVE BIT(4) -#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN BIT(5) -#define AR934X_ETH_CFG_SW_ONLY_MODE BIT(6) -#define AR934X_ETH_CFG_SW_PHY_SWAP BIT(7) -#define AR934X_ETH_CFG_SW_APB_ACCESS BIT(9) -#define AR934X_ETH_CFG_RMII_GMAC0 BIT(10) -#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11) -#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12) -#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13) - -/* - * QCA955X GMAC Interface - */ - -#define QCA955X_GMAC_REG_ETH_CFG 0x00 - -#define QCA955X_ETH_CFG_RGMII_GMAC0 BIT(0) -#define QCA955X_ETH_CFG_SGMII_GMAC0 BIT(6) - -#endif /* __ASM_MACH_AR71XX_REGS_H */ diff --git a/target/linux/ath79/image/lzma-loader/src/board.c b/target/linux/ath79/image/lzma-loader/src/board.c deleted file mode 100644 index 2f4dd6b..0000000 --- a/target/linux/ath79/image/lzma-loader/src/board.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards - * - * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <stddef.h> -#include "config.h" -#include "ar71xx_regs.h" - -#define READREG(r) *(volatile unsigned int *)(r) -#define WRITEREG(r,v) *(volatile unsigned int *)(r) = v - -#define KSEG1ADDR(_x) (((_x) & 0x1fffffff) | 0xa0000000) - -#define UART_BASE 0xb8020000 - -#define UART_TX 0 -#define UART_LSR 5 - -#define UART_LSR_THRE 0x20 - -#define UART_READ(r) READREG(UART_BASE + 4 * (r)) -#define UART_WRITE(r,v) WRITEREG(UART_BASE + 4 * (r), (v)) - -void board_putc(int ch) -{ - while (((UART_READ(UART_LSR)) & UART_LSR_THRE) == 0); - UART_WRITE(UART_TX, ch); - while (((UART_READ(UART_LSR)) & UART_LSR_THRE) == 0); -} - -#ifdef CONFIG_BOARD_TL_WR1043ND_V1 -static void tlwr1043nd_init(void) -{ - unsigned int reg = KSEG1ADDR(AR71XX_RESET_BASE); - unsigned int t; - - t = READREG(reg + AR913X_RESET_REG_RESET_MODULE); - t |= AR71XX_RESET_GE0_PHY; - WRITEREG(reg + AR913X_RESET_REG_RESET_MODULE, t); - /* flush write */ - t = READREG(reg + AR913X_RESET_REG_RESET_MODULE); -} -#else -static inline void tlwr1043nd_init(void) {} -#endif - -void board_init(void) -{ - tlwr1043nd_init(); -} diff --git a/target/linux/ath79/image/lzma-loader/src/cache.c b/target/linux/ath79/image/lzma-loader/src/cache.c deleted file mode 100644 index 28cc848..0000000 --- a/target/linux/ath79/image/lzma-loader/src/cache.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards - * - * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * The cache manipulation routine has been taken from the U-Boot project. - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#include "cache.h" -#include "cacheops.h" -#include "config.h" - -#define cache_op(op,addr) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noreorder \n" \ - " .set mips3\n\t \n" \ - " cache %0, %1 \n" \ - " .set pop \n" \ - : \ - : "i" (op), "R" (*(unsigned char *)(addr))) - -void flush_cache(unsigned long start_addr, unsigned long size) -{ - unsigned long lsize = CONFIG_CACHELINE_SIZE; - unsigned long addr = start_addr & ~(lsize - 1); - unsigned long aend = (start_addr + size - 1) & ~(lsize - 1); - - while (1) { - cache_op(Hit_Writeback_Inv_D, addr); - cache_op(Hit_Invalidate_I, addr); - if (addr == aend) - break; - addr += lsize; - } -} diff --git a/target/linux/ath79/image/lzma-loader/src/cache.h b/target/linux/ath79/image/lzma-loader/src/cache.h deleted file mode 100644 index 506a235..0000000 --- a/target/linux/ath79/image/lzma-loader/src/cache.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards - * - * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef __CACHE_H -#define __CACHE_H - -void flush_cache(unsigned long start_addr, unsigned long size); - -#endif /* __CACHE_H */ diff --git a/target/linux/ath79/image/lzma-loader/src/cacheops.h b/target/linux/ath79/image/lzma-loader/src/cacheops.h deleted file mode 100644 index 70bcad7..0000000 --- a/target/linux/ath79/image/lzma-loader/src/cacheops.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Cache operations for the cache instruction. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * (C) Copyright 1996, 97, 99, 2002, 03 Ralf Baechle - * (C) Copyright 1999 Silicon Graphics, Inc. - */ -#ifndef __ASM_CACHEOPS_H -#define __ASM_CACHEOPS_H - -/* - * Cache Operations available on all MIPS processors with R4000-style caches - */ -#define Index_Invalidate_I 0x00 -#define Index_Writeback_Inv_D 0x01 -#define Index_Load_Tag_I 0x04 -#define Index_Load_Tag_D 0x05 -#define Index_Store_Tag_I 0x08 -#define Index_Store_Tag_D 0x09 -#if defined(CONFIG_CPU_LOONGSON2) -#define Hit_Invalidate_I 0x00 -#else -#define Hit_Invalidate_I 0x10 -#endif -#define Hit_Invalidate_D 0x11 -#define Hit_Writeback_Inv_D 0x15 - -/* - * R4000-specific cacheops - */ -#define Create_Dirty_Excl_D 0x0d -#define Fill 0x14 -#define Hit_Writeback_I 0x18 -#define Hit_Writeback_D 0x19 - -/* - * R4000SC and R4400SC-specific cacheops - */ -#define Index_Invalidate_SI 0x02 -#define Index_Writeback_Inv_SD 0x03 -#define Index_Load_Tag_SI 0x06 -#define Index_Load_Tag_SD 0x07 -#define Index_Store_Tag_SI 0x0A -#define Index_Store_Tag_SD 0x0B -#define Create_Dirty_Excl_SD 0x0f -#define Hit_Invalidate_SI 0x12 -#define Hit_Invalidate_SD 0x13 -#define Hit_Writeback_Inv_SD 0x17 -#define Hit_Writeback_SD 0x1b -#define Hit_Set_Virtual_SI 0x1e -#define Hit_Set_Virtual_SD 0x1f - -/* - * R5000-specific cacheops - */ -#define R5K_Page_Invalidate_S 0x17 - -/* - * RM7000-specific cacheops - */ -#define Page_Invalidate_T 0x16 - -/* - * R10000-specific cacheops - * - * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused. - * Most of the _S cacheops are identical to the R4000SC _SD cacheops. - */ -#define Index_Writeback_Inv_S 0x03 -#define Index_Load_Tag_S 0x07 -#define Index_Store_Tag_S 0x0B -#define Hit_Invalidate_S 0x13 -#define Cache_Barrier 0x14 -#define Hit_Writeback_Inv_S 0x17 -#define Index_Load_Data_I 0x18 -#define Index_Load_Data_D 0x19 -#define Index_Load_Data_S 0x1b -#define Index_Store_Data_I 0x1c -#define Index_Store_Data_D 0x1d -#define Index_Store_Data_S 0x1f - -#endif /* __ASM_CACHEOPS_H */ diff --git a/target/linux/ath79/image/lzma-loader/src/config.h b/target/linux/ath79/image/lzma-loader/src/config.h deleted file mode 100644 index 287392b..0000000 --- a/target/linux/ath79/image/lzma-loader/src/config.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards - * - * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef _CONFIG_H_ -#define _CONFIG_H_ - -#define CONFIG_ICACHE_SIZE (32 * 1024) -#define CONFIG_DCACHE_SIZE (64 * 1024) -#define CONFIG_CACHELINE_SIZE 32 - -#ifndef CONFIG_FLASH_OFFS -#define CONFIG_FLASH_OFFS 0 -#endif - -#ifndef CONFIG_FLASH_MAX -#define CONFIG_FLASH_MAX 0 -#endif - -#ifndef CONFIG_FLASH_STEP -#define CONFIG_FLASH_STEP 0x1000 -#endif - -#endif /* _CONFIG_H_ */ diff --git a/target/linux/ath79/image/lzma-loader/src/cp0regdef.h b/target/linux/ath79/image/lzma-loader/src/cp0regdef.h deleted file mode 100644 index c1188ad..0000000 --- a/target/linux/ath79/image/lzma-loader/src/cp0regdef.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle - * - * Copyright (C) 2001, Monta Vista Software - * Author: jsun@mvista.com or jsun@junsun.net - */ -#ifndef _cp0regdef_h_ -#define _cp0regdef_h_ - -#define CP0_INDEX $0 -#define CP0_RANDOM $1 -#define CP0_ENTRYLO0 $2 -#define CP0_ENTRYLO1 $3 -#define CP0_CONTEXT $4 -#define CP0_PAGEMASK $5 -#define CP0_WIRED $6 -#define CP0_BADVADDR $8 -#define CP0_COUNT $9 -#define CP0_ENTRYHI $10 -#define CP0_COMPARE $11 -#define CP0_STATUS $12 -#define CP0_CAUSE $13 -#define CP0_EPC $14 -#define CP0_PRID $15 -#define CP0_CONFIG $16 -#define CP0_LLADDR $17 -#define CP0_WATCHLO $18 -#define CP0_WATCHHI $19 -#define CP0_XCONTEXT $20 -#define CP0_FRAMEMASK $21 -#define CP0_DIAGNOSTIC $22 -#define CP0_PERFORMANCE $25 -#define CP0_ECC $26 -#define CP0_CACHEERR $27 -#define CP0_TAGLO $28 -#define CP0_TAGHI $29 -#define CP0_ERROREPC $30 - -#endif diff --git a/target/linux/ath79/image/lzma-loader/src/head.S b/target/linux/ath79/image/lzma-loader/src/head.S deleted file mode 100644 index 47a7c9b..0000000 --- a/target/linux/ath79/image/lzma-loader/src/head.S +++ /dev/null @@ -1,121 +0,0 @@ -/* - * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards - * - * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * Some parts of this code was based on the OpenWrt specific lzma-loader - * for the BCM47xx and ADM5120 based boards: - * Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org) - * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/asm.h> -#include <asm/regdef.h> -#include "cp0regdef.h" -#include "cacheops.h" -#include "config.h" - -#define KSEG0 0x80000000 - - .macro ehb - sll zero, 3 - .endm - - .text - -LEAF(startup) - .set noreorder - .set mips32 - - mtc0 zero, CP0_WATCHLO # clear watch registers - mtc0 zero, CP0_WATCHHI - mtc0 zero, CP0_CAUSE # clear before writing status register - - mfc0 t0, CP0_STATUS - li t1, 0x1000001f - or t0, t1 - xori t0, 0x1f - mtc0 t0, CP0_STATUS - ehb - - mtc0 zero, CP0_COUNT - mtc0 zero, CP0_COMPARE - ehb - - la t0, __reloc_label # get linked address of label - bal __reloc_label # branch and link to label to - nop # get actual address -__reloc_label: - subu t0, ra, t0 # get reloc_delta - - beqz t0, __reloc_done # if delta is 0 we are in the right place - nop - - /* Copy our code to the right place */ - la t1, _code_start # get linked address of _code_start - la t2, _code_end # get linked address of _code_end - addu t0, t0, t1 # calculate actual address of _code_start - -__reloc_copy: - lw t3, 0(t0) - sw t3, 0(t1) - add t1, 4 - blt t1, t2, __reloc_copy - add t0, 4 - - /* flush cache */ - la t0, _code_start - la t1, _code_end - - li t2, ~(CONFIG_CACHELINE_SIZE - 1) - and t0, t2 - and t1, t2 - li t2, CONFIG_CACHELINE_SIZE - - b __flush_check - nop - -__flush_line: - cache Hit_Writeback_Inv_D, 0(t0) - cache Hit_Invalidate_I, 0(t0) - add t0, t2 - -__flush_check: - bne t0, t1, __flush_line - nop - - sync - -__reloc_done: - - /* clear bss */ - la t0, _bss_start - la t1, _bss_end - b __bss_check - nop - -__bss_fill: - sw zero, 0(t0) - addi t0, 4 - -__bss_check: - bne t0, t1, __bss_fill - nop - - /* Setup new "C" stack */ - la sp, _stack - - /* reserve stack space for a0-a3 registers */ - subu sp, 16 - - /* jump to the decompressor routine */ - la t0, loader_main - jr t0 - nop - - .set reorder -END(startup) diff --git a/target/linux/ath79/image/lzma-loader/src/loader.c b/target/linux/ath79/image/lzma-loader/src/loader.c deleted file mode 100644 index cc73eb1..0000000 --- a/target/linux/ath79/image/lzma-loader/src/loader.c +++ /dev/null @@ -1,264 +0,0 @@ -/* - * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards - * - * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * Some parts of this code was based on the OpenWrt specific lzma-loader - * for the BCM47xx and ADM5120 based boards: - * Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org) - * Copyright (C) 2005 Mineharu Takahara <mtakahar@yahoo.com> - * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su> - * - * The image_header structure has been taken from the U-Boot project. - * (C) Copyright 2008 Semihalf - * (C) Copyright 2000-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <stddef.h> -#include <stdint.h> - -#include "config.h" -#include "cache.h" -#include "printf.h" -#include "LzmaDecode.h" - -#define AR71XX_FLASH_START 0x1f000000 -#define AR71XX_FLASH_END 0x1fe00000 - -#define KSEG0 0x80000000 -#define KSEG1 0xa0000000 - -#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1) - -#undef LZMA_DEBUG - -#ifdef LZMA_DEBUG -# define DBG(f, a...) printf(f, ## a) -#else -# define DBG(f, a...) do {} while (0) -#endif - -#define IH_MAGIC_OKLI 0x4f4b4c49 /* 'OKLI' */ - -#define IH_NMLEN 32 /* Image Name Length */ - -typedef struct image_header { - uint32_t ih_magic; /* Image Header Magic Number */ - uint32_t ih_hcrc; /* Image Header CRC Checksum */ - uint32_t ih_time; /* Image Creation Timestamp */ - uint32_t ih_size; /* Image Data Size */ - uint32_t ih_load; /* Data Load Address */ - uint32_t ih_ep; /* Entry Point Address */ - uint32_t ih_dcrc; /* Image Data CRC Checksum */ - uint8_t ih_os; /* Operating System */ - uint8_t ih_arch; /* CPU architecture */ - uint8_t ih_type; /* Image Type */ - uint8_t ih_comp; /* Compression Type */ - uint8_t ih_name[IH_NMLEN]; /* Image Name */ -} image_header_t; - -/* beyond the image end, size not known in advance */ -extern unsigned char workspace[]; -extern void board_init(void); - -static CLzmaDecoderState lzma_state; -static unsigned char *lzma_data; -static unsigned long lzma_datasize; -static unsigned long lzma_outsize; -static unsigned long kernel_la; - -#ifdef CONFIG_KERNEL_CMDLINE -#define kernel_argc 2 -static const char kernel_cmdline[] = CONFIG_KERNEL_CMDLINE; -static const char *kernel_argv[] = { - NULL, - kernel_cmdline, - NULL, -}; -#endif /* CONFIG_KERNEL_CMDLINE */ - -static void halt(void) -{ - printf("\nSystem halted!\n"); - for(;;); -} - -static __inline__ unsigned long get_be32(void *buf) -{ - unsigned char *p = buf; - - return (((unsigned long) p[0] << 24) + - ((unsigned long) p[1] << 16) + - ((unsigned long) p[2] << 8) + - (unsigned long) p[3]); -} - -static __inline__ unsigned char lzma_get_byte(void) -{ - unsigned char c; - - lzma_datasize--; - c = *lzma_data++; - - return c; -} - -static int lzma_init_props(void) -{ - unsigned char props[LZMA_PROPERTIES_SIZE]; - int res; - int i; - - /* read lzma properties */ - for (i = 0; i < LZMA_PROPERTIES_SIZE; i++) - props[i] = lzma_get_byte(); - - /* read the lower half of uncompressed size in the header */ - lzma_outsize = ((SizeT) lzma_get_byte()) + - ((SizeT) lzma_get_byte() << 8) + - ((SizeT) lzma_get_byte() << 16) + - ((SizeT) lzma_get_byte() << 24); - - /* skip rest of the header (upper half of uncompressed size) */ - for (i = 0; i < 4; i++) - lzma_get_byte(); - - res = LzmaDecodeProperties(&lzma_state.Properties, props, - LZMA_PROPERTIES_SIZE); - return res; -} - -static int lzma_decompress(unsigned char *outStream) -{ - SizeT ip, op; - int ret; - - lzma_state.Probs = (CProb *) workspace; - - ret = LzmaDecode(&lzma_state, lzma_data, lzma_datasize, &ip, outStream, - lzma_outsize, &op); - - if (ret != LZMA_RESULT_OK) { - int i; - - DBG("LzmaDecode error %d at %08x, osize:%d ip:%d op:%d\n", - ret, lzma_data + ip, lzma_outsize, ip, op); - - for (i = 0; i < 16; i++) - DBG("%02x ", lzma_data[ip + i]); - - DBG("\n"); - } - - return ret; -} - -#if (LZMA_WRAPPER) -static void lzma_init_data(void) -{ - extern unsigned char _lzma_data_start[]; - extern unsigned char _lzma_data_end[]; - - kernel_la = LOADADDR; - lzma_data = _lzma_data_start; - lzma_datasize = _lzma_data_end - _lzma_data_start; -} -#else -static void lzma_init_data(void) -{ - struct image_header *hdr = NULL; - unsigned char *flash_base; - unsigned long flash_ofs; - unsigned long kernel_ofs; - unsigned long kernel_size; - - flash_base = (unsigned char *) KSEG1ADDR(AR71XX_FLASH_START); - - printf("Looking for OpenWrt image... "); - - for (flash_ofs = CONFIG_FLASH_OFFS; - flash_ofs <= (CONFIG_FLASH_OFFS + CONFIG_FLASH_MAX); - flash_ofs += CONFIG_FLASH_STEP) { - unsigned long magic; - unsigned char *p; - - p = flash_base + flash_ofs; - magic = get_be32(p); - if (magic == IH_MAGIC_OKLI) { - hdr = (struct image_header *) p; - break; - } - } - - if (hdr == NULL) { - printf("not found!\n"); - halt(); - } - - printf("found at 0x%08x\n", flash_base + flash_ofs); - - kernel_ofs = sizeof(struct image_header); - kernel_size = get_be32(&hdr->ih_size); - kernel_la = get_be32(&hdr->ih_load); - - lzma_data = flash_base + flash_ofs + kernel_ofs; - lzma_datasize = kernel_size; -} -#endif /* (LZMA_WRAPPER) */ - -void loader_main(unsigned long reg_a0, unsigned long reg_a1, - unsigned long reg_a2, unsigned long reg_a3) -{ - void (*kernel_entry) (unsigned long, unsigned long, unsigned long, - unsigned long); - int res; - - board_init(); - - printf("\n\nOpenWrt kernel loader for AR7XXX/AR9XXX\n"); - printf("Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>\n"); - - lzma_init_data(); - - res = lzma_init_props(); - if (res != LZMA_RESULT_OK) { - printf("Incorrect LZMA stream properties!\n"); - halt(); - } - - printf("Decompressing kernel... "); - - res = lzma_decompress((unsigned char *) kernel_la); - if (res != LZMA_RESULT_OK) { - printf("failed, "); - switch (res) { - case LZMA_RESULT_DATA_ERROR: - printf("data error!\n"); - break; - default: - printf("unknown error %d!\n", res); - } - halt(); - } else { - printf("done!\n"); - } - - flush_cache(kernel_la, lzma_outsize); - - printf("Starting kernel at %08x...\n\n", kernel_la); - -#ifdef CONFIG_KERNEL_CMDLINE - reg_a0 = kernel_argc; - reg_a1 = (unsigned long) kernel_argv; - reg_a2 = 0; - reg_a3 = 0; -#endif - - kernel_entry = (void *) kernel_la; - kernel_entry(reg_a0, reg_a1, reg_a2, reg_a3); -} diff --git a/target/linux/ath79/image/lzma-loader/src/loader.lds b/target/linux/ath79/image/lzma-loader/src/loader.lds deleted file mode 100644 index 80cc7ca..0000000 --- a/target/linux/ath79/image/lzma-loader/src/loader.lds +++ /dev/null @@ -1,35 +0,0 @@ -OUTPUT_ARCH(mips) -SECTIONS { - .text : { - _code_start = .; - *(.text) - *(.text.*) - *(.rodata) - *(.rodata.*) - *(.data.lzma) - } - - . = ALIGN(32); - .data : { - *(.data) - *(.data.*) - . = . + 524288; /* workaround for buggy bootloaders */ - } - - . = ALIGN(32); - _code_end = .; - - _bss_start = .; - .bss : { - *(.bss) - *(.bss.*) - } - - . = ALIGN(32); - _bss_end = .; - - . = . + 8192; - _stack = .; - - workspace = .; -} diff --git a/target/linux/ath79/image/lzma-loader/src/loader2.lds b/target/linux/ath79/image/lzma-loader/src/loader2.lds deleted file mode 100644 index db0bb46..0000000 --- a/target/linux/ath79/image/lzma-loader/src/loader2.lds +++ /dev/null @@ -1,10 +0,0 @@ -OUTPUT_ARCH(mips) -SECTIONS { - .text : { - startup = .; - *(.text) - *(.text.*) - *(.data) - *(.data.*) - } -} diff --git a/target/linux/ath79/image/lzma-loader/src/lzma-data.lds b/target/linux/ath79/image/lzma-loader/src/lzma-data.lds deleted file mode 100644 index abf756b..0000000 --- a/target/linux/ath79/image/lzma-loader/src/lzma-data.lds +++ /dev/null @@ -1,8 +0,0 @@ -OUTPUT_ARCH(mips) -SECTIONS { - .data.lzma : { - _lzma_data_start = .; - *(.data) - _lzma_data_end = .; - } -} diff --git a/target/linux/ath79/image/lzma-loader/src/printf.c b/target/linux/ath79/image/lzma-loader/src/printf.c deleted file mode 100644 index 7bb5a86..0000000 --- a/target/linux/ath79/image/lzma-loader/src/printf.c +++ /dev/null @@ -1,350 +0,0 @@ -/* - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include "printf.h" - -extern void board_putc(int ch); - -/* this is the maximum width for a variable */ -#define LP_MAX_BUF 256 - -/* macros */ -#define IsDigit(x) ( ((x) >= '0') && ((x) <= '9') ) -#define Ctod(x) ( (x) - '0') - -/* forward declaration */ -static int PrintChar(char *, char, int, int); -static int PrintString(char *, char *, int, int); -static int PrintNum(char *, unsigned long, int, int, int, int, char, int); - -/* private variable */ -static const char theFatalMsg[] = "fatal error in lp_Print!"; - -/* -*- - * A low level printf() function. - */ -static void -lp_Print(void (*output)(void *, char *, int), - void * arg, - char *fmt, - va_list ap) -{ - -#define OUTPUT(arg, s, l) \ - { if (((l) < 0) || ((l) > LP_MAX_BUF)) { \ - (*output)(arg, (char*)theFatalMsg, sizeof(theFatalMsg)-1); for(;;); \ - } else { \ - (*output)(arg, s, l); \ - } \ - } - - char buf[LP_MAX_BUF]; - - char c; - char *s; - long int num; - - int longFlag; - int negFlag; - int width; - int prec; - int ladjust; - char padc; - - int length; - - for(;;) { - { - /* scan for the next '%' */ - char *fmtStart = fmt; - while ( (*fmt != '\0') && (*fmt != '%')) { - fmt ++; - } - - /* flush the string found so far */ - OUTPUT(arg, fmtStart, fmt-fmtStart); - - /* are we hitting the end? */ - if (*fmt == '\0') break; - } - - /* we found a '%' */ - fmt ++; - - /* check for long */ - if (*fmt == 'l') { - longFlag = 1; - fmt ++; - } else { - longFlag = 0; - } - - /* check for other prefixes */ - width = 0; - prec = -1; - ladjust = 0; - padc = ' '; - - if (*fmt == '-') { - ladjust = 1; - fmt ++; - } - - if (*fmt == '0') { - padc = '0'; - fmt++; - } - - if (IsDigit(*fmt)) { - while (IsDigit(*fmt)) { - width = 10 * width + Ctod(*fmt++); - } - } - - if (*fmt == '.') { - fmt ++; - if (IsDigit(*fmt)) { - prec = 0; - while (IsDigit(*fmt)) { - prec = prec*10 + Ctod(*fmt++); - } - } - } - - - /* check format flag */ - negFlag = 0; - switch (*fmt) { - case 'b': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 2, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'd': - case 'D': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - if (num < 0) { - num = - num; - negFlag = 1; - } - length = PrintNum(buf, num, 10, negFlag, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'o': - case 'O': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 8, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'u': - case 'U': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 10, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'x': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'X': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 1); - OUTPUT(arg, buf, length); - break; - - case 'c': - c = (char)va_arg(ap, int); - length = PrintChar(buf, c, width, ladjust); - OUTPUT(arg, buf, length); - break; - - case 's': - s = (char*)va_arg(ap, char *); - length = PrintString(buf, s, width, ladjust); - OUTPUT(arg, buf, length); - break; - - case '\0': - fmt --; - break; - - default: - /* output this char as it is */ - OUTPUT(arg, fmt, 1); - } /* switch (*fmt) */ - - fmt ++; - } /* for(;;) */ - - /* special termination call */ - OUTPUT(arg, "\0", 1); -} - - -/* --------------- local help functions --------------------- */ -static int -PrintChar(char * buf, char c, int length, int ladjust) -{ - int i; - - if (length < 1) length = 1; - if (ladjust) { - *buf = c; - for (i=1; i< length; i++) buf[i] = ' '; - } else { - for (i=0; i< length-1; i++) buf[i] = ' '; - buf[length - 1] = c; - } - return length; -} - -static int -PrintString(char * buf, char* s, int length, int ladjust) -{ - int i; - int len=0; - char* s1 = s; - while (*s1++) len++; - if (length < len) length = len; - - if (ladjust) { - for (i=0; i< len; i++) buf[i] = s[i]; - for (i=len; i< length; i++) buf[i] = ' '; - } else { - for (i=0; i< length-len; i++) buf[i] = ' '; - for (i=length-len; i < length; i++) buf[i] = s[i-length+len]; - } - return length; -} - -static int -PrintNum(char * buf, unsigned long u, int base, int negFlag, - int length, int ladjust, char padc, int upcase) -{ - /* algorithm : - * 1. prints the number from left to right in reverse form. - * 2. fill the remaining spaces with padc if length is longer than - * the actual length - * TRICKY : if left adjusted, no "0" padding. - * if negtive, insert "0" padding between "0" and number. - * 3. if (!ladjust) we reverse the whole string including paddings - * 4. otherwise we only reverse the actual string representing the num. - */ - - int actualLength =0; - char *p = buf; - int i; - - do { - int tmp = u %base; - if (tmp <= 9) { - *p++ = '0' + tmp; - } else if (upcase) { - *p++ = 'A' + tmp - 10; - } else { - *p++ = 'a' + tmp - 10; - } - u /= base; - } while (u != 0); - - if (negFlag) { - *p++ = '-'; - } - - /* figure out actual length and adjust the maximum length */ - actualLength = p - buf; - if (length < actualLength) length = actualLength; - - /* add padding */ - if (ladjust) { - padc = ' '; - } - if (negFlag && !ladjust && (padc == '0')) { - for (i = actualLength-1; i< length-1; i++) buf[i] = padc; - buf[length -1] = '-'; - } else { - for (i = actualLength; i< length; i++) buf[i] = padc; - } - - - /* prepare to reverse the string */ - { - int begin = 0; - int end; - if (ladjust) { - end = actualLength - 1; - } else { - end = length -1; - } - - while (end > begin) { - char tmp = buf[begin]; - buf[begin] = buf[end]; - buf[end] = tmp; - begin ++; - end --; - } - } - - /* adjust the string pointer */ - return length; -} - -static void printf_output(void *arg, char *s, int l) -{ - int i; - - // special termination call - if ((l==1) && (s[0] == '\0')) return; - - for (i=0; i< l; i++) { - board_putc(s[i]); - if (s[i] == '\n') board_putc('\r'); - } -} - -void printf(char *fmt, ...) -{ - va_list ap; - va_start(ap, fmt); - lp_Print(printf_output, 0, fmt, ap); - va_end(ap); -} diff --git a/target/linux/ath79/image/lzma-loader/src/printf.h b/target/linux/ath79/image/lzma-loader/src/printf.h deleted file mode 100644 index 9b1c1df..0000000 --- a/target/linux/ath79/image/lzma-loader/src/printf.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef _printf_h_ -#define _printf_h_ - -#include <stdarg.h> -void printf(char *fmt, ...); - -#endif /* _printf_h_ */ diff --git a/target/linux/ath79/image/tp-link.mk b/target/linux/ath79/image/tp-link.mk deleted file mode 100644 index bbe4054..0000000 --- a/target/linux/ath79/image/tp-link.mk +++ /dev/null @@ -1,119 +0,0 @@ -DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT TPLINK_HEADER_VERSION TPLINK_BOARD_NAME - -# combine kernel and rootfs into one image -# mktplinkfw <type> <optional extra arguments to mktplinkfw binary> -# <type> is "sysupgrade" or "factory" -# -# -a align the rootfs start on an <align> bytes boundary -# -j add jffs2 end-of-filesystem markers -# -s strip padding from end of the image -# -X reserve <size> bytes in the firmware image (hexval prefixed with 0x) -define Build/mktplinkfw - -$(STAGING_DIR_HOST)/bin/mktplinkfw \ - -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) \ - -m $(TPLINK_HEADER_VERSION) \ - -k $(IMAGE_KERNEL) \ - -r $@ \ - -o $@.new \ - -j -X 0x40000 \ - -a $(call rootfs_align,$(FILESYSTEM)) \ - $(wordlist 2,$(words $(1)),$(1)) \ - $(if $(findstring sysupgrade,$(word 1,$(1))),-s) && mv $@.new $@ || rm -f $@ -endef - -# mktplinkfw-combined -# -# -c combined image -define Build/mktplinkfw-combined - $(STAGING_DIR_HOST)/bin/mktplinkfw \ - -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) $(1) \ - -m $(TPLINK_HEADER_VERSION) \ - -k $@ \ - -o $@.new \ - -s -S \ - -c - @mv $@.new $@ -endef - -# add RE450 and similar header to the kernel image -define Build/mktplinkfw-kernel - $(STAGING_DIR_HOST)/bin/mktplinkfw-kernel \ - -H $(TPLINK_HWID) -N OpenWrt -V $(REVISION) \ - -L $(KERNEL_LOADADDR) -E $(KERNEL_LOADADDR) \ - -k $@ \ - -o $@.new - @mv $@.new $@ -endef - -define Build/uImageArcher - mkimage -A $(LINUX_KARCH) \ - -O linux -T kernel \ - -C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \ - -n '$(call toupper,$(LINUX_KARCH)) LEDE Linux-$(LINUX_VERSION)' -d $@ $@.new - @mv $@.new $@ -endef - - -define Device/tplink - TPLINK_HWREV := 0x1 - TPLINK_HEADER_VERSION := 1 - LOADER_TYPE := gz - KERNEL := kernel-bin | patch-cmdline | lzma - KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | mktplinkfw-combined -# IMAGES := sysupgrade.bin - IMAGES := sysupgrade.bin factory.bin - IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade -# IMAGE/factory.bin := append-rootfs | mktplinkfw factory | a -endef - -define Device/tplink-nolzma -$(Device/tplink) - LOADER_FLASH_OFFS := 0x22000 - COMPILE := loader-$(1).gz - COMPILE/loader-$(1).gz := loader-okli-compile - #KERNEL := copy-file $(KDIR)/vmlinux.bin.lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) - KERNEL:= kernel-bin | append-dtb | lzma |uImage lzma -M 0x4f4b4c49 | loader-okli $(1) - KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-initramfs.bin.lzma | loader-kernel-cmdline | mktplinkfw-combined -endef - -define Device/tplink-4m -$(Device/tplink-nolzma) - TPLINK_FLASHLAYOUT := 4M - IMAGE_SIZE := 3904k -endef - -define Device/tplink-8m -$(Device/tplink-nolzma) - TPLINK_FLASHLAYOUT := 8M - IMAGE_SIZE := 7936k -endef - -define Device/tplink-4mlzma -$(Device/tplink) - TPLINK_FLASHLAYOUT := 4Mlzma - IMAGE_SIZE := 3904k -endef - -define Device/tplink-8mlzma -$(Device/tplink) - TPLINK_FLASHLAYOUT := 8Mlzma - IMAGE_SIZE := 7936k -endef - -define Device/tplink-16mlzma -$(Device/tplink) - TPLINK_FLASHLAYOUT := 16Mlzma - IMAGE_SIZE := 15872k -endef - -define Device/tl_wr1043nd_v1 - $(Device/tplink-8m) - ATH_SOC := ar9132 - DEVICE_TITLE := TP-LINK TL-WR1043N/ND v1 - DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := TL-WR1043ND - DEVICE_PROFILE := TLWR1043 - TPLINK_HWID := 0x10430001 -endef - -#TARGET_DEVICES += tl_wr1043nd_v1 diff --git a/target/linux/ath79/modules.mk b/target/linux/ath79/modules.mk deleted file mode 100644 index 946440d..0000000 --- a/target/linux/ath79/modules.mk +++ /dev/null @@ -1,16 +0,0 @@ -LEDS_MENU:=LED modules - -define KernelPackage/leds-reset - SUBMENU:=$(LEDS_MENU) - TITLE:=reset controller LED support - DEPENDS:= @TARGET_ath79 - KCONFIG:=CONFIG_LEDS_RESET=m - FILES:=$(LINUX_DIR)/drivers/leds/leds-reset.ko - AUTOLOAD:=$(call AutoLoad,60,leds-reset,1) -endef - -define KernelPackage/leds-reset/description - Kernel module for LEDs on reset lines -endef - -$(eval $(call KernelPackage,leds-reset)) diff --git a/target/linux/ath79/patches-4.14/0001-tty-serial-drop-QCA-pecific-SoC-symbols.patch b/target/linux/ath79/patches-4.14/0001-tty-serial-drop-QCA-pecific-SoC-symbols.patch deleted file mode 100644 index 6c4b907..0000000 --- a/target/linux/ath79/patches-4.14/0001-tty-serial-drop-QCA-pecific-SoC-symbols.patch +++ /dev/null @@ -1,21 +0,0 @@ -From 58812f6d0f1e11b03ed266038ed3b7274ab6f121 Mon Sep 17 00:00:00 2001 -From: John Crispin <john@phrozen.org> -Date: Tue, 6 Mar 2018 09:26:32 +0100 -Subject: [PATCH 01/27] tty: serial: drop QCA pecific SoC symbols - -Signed-off-by: John Crispin <john@phrozen.org> ---- - drivers/tty/serial/Kconfig | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/tty/serial/Kconfig -+++ b/drivers/tty/serial/Kconfig -@@ -1463,7 +1463,7 @@ config SERIAL_XILINX_PS_UART_CONSOLE - - config SERIAL_AR933X - tristate "AR933X serial port support" -- depends on HAVE_CLK && SOC_AR933X -+ depends on HAVE_CLK && ATH79 - select SERIAL_CORE - help - If you have an Atheros AR933X SOC based board and want to use the diff --git a/target/linux/ath79/patches-4.14/0002-watchdog-ath79-fix-maximum-timeout.patch b/target/linux/ath79/patches-4.14/0002-watchdog-ath79-fix-maximum-timeout.patch deleted file mode 100644 index 36234d8..0000000 --- a/target/linux/ath79/patches-4.14/0002-watchdog-ath79-fix-maximum-timeout.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 5f5c9858af167f842ee8df053920b98387a71af1 Mon Sep 17 00:00:00 2001 -From: John Crispin <john@phrozen.org> -Date: Mon, 5 Mar 2018 11:41:25 +0100 -Subject: [PATCH 02/27] watchdog: ath79: fix maximum timeout - -If the userland tries to set a timeout higher than the max_timeout, -then we should fallback to max_timeout. - -Signed-off-by: John Crispin <john@phrozen.org> ---- - drivers/watchdog/ath79_wdt.c | 8 ++++++-- - 1 file changed, 6 insertions(+), 2 deletions(-) - ---- a/drivers/watchdog/ath79_wdt.c -+++ b/drivers/watchdog/ath79_wdt.c -@@ -115,10 +115,14 @@ static inline void ath79_wdt_disable(voi - - static int ath79_wdt_set_timeout(int val) - { -- if (val < 1 || val > max_timeout) -+ if (val < 1) - return -EINVAL; - -- timeout = val; -+ if (val > max_timeout) -+ timeout = max_timeout; -+ else -+ timeout = val; -+ - ath79_wdt_keepalive(); - - return 0; diff --git a/target/linux/ath79/patches-4.14/0003-leds-add-reset-controller-based-driver.patch b/target/linux/ath79/patches-4.14/0003-leds-add-reset-controller-based-driver.patch deleted file mode 100644 index 495d792..0000000 --- a/target/linux/ath79/patches-4.14/0003-leds-add-reset-controller-based-driver.patch +++ /dev/null @@ -1,183 +0,0 @@ -From ecbd9c87f073f097d9fe56390353e64e963e866a Mon Sep 17 00:00:00 2001 -From: John Crispin <john@phrozen.org> -Date: Tue, 6 Mar 2018 10:03:03 +0100 -Subject: [PATCH 03/27] leds: add reset-controller based driver - -Signed-off-by: John Crispin <john@phrozen.org> ---- - drivers/leds/Kconfig | 11 ++++ - drivers/leds/Makefile | 1 + - drivers/leds/leds-reset.c | 137 ++++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 149 insertions(+) - create mode 100644 drivers/leds/leds-reset.c - ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -696,6 +696,17 @@ config LEDS_NIC78BX - To compile this driver as a module, choose M here: the module - will be called leds-nic78bx. - -+config LEDS_RESET -+ tristate "LED support for reset-controller API" -+ depends on LEDS_CLASS -+ depends on RESET_CONTROLLER -+ help -+ This option enables support for LEDs connected to pins driven by reset -+ controllers. Yes, DNI actual built HW like that. -+ -+ To compile this driver as a module, choose M here: the module -+ will be called leds-reset. -+ - comment "LED Triggers" - source "drivers/leds/trigger/Kconfig" - ---- /dev/null -+++ b/drivers/leds/leds-reset.c -@@ -0,0 +1,137 @@ -+/* -+ * Copyright (C) 2018 John Crispin <john@phrozen.org> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+#include <linux/err.h> -+#include <linux/reset.h> -+#include <linux/kernel.h> -+#include <linux/leds.h> -+#include <linux/module.h> -+#include <linux/of.h> -+#include <linux/platform_device.h> -+#include <linux/reset.h> -+ -+struct reset_led_data { -+ struct led_classdev cdev; -+ struct reset_control *rst; -+}; -+ -+static inline struct reset_led_data * -+ cdev_to_reset_led_data(struct led_classdev *led_cdev) -+{ -+ return container_of(led_cdev, struct reset_led_data, cdev); -+} -+ -+static void reset_led_set(struct led_classdev *led_cdev, -+ enum led_brightness value) -+{ -+ struct reset_led_data *led_dat = cdev_to_reset_led_data(led_cdev); -+ -+ if (value == LED_OFF) -+ reset_control_assert(led_dat->rst); -+ else -+ reset_control_deassert(led_dat->rst); -+} -+ -+struct reset_leds_priv { -+ int num_leds; -+ struct reset_led_data leds[]; -+}; -+ -+static inline int sizeof_reset_leds_priv(int num_leds) -+{ -+ return sizeof(struct reset_leds_priv) + -+ (sizeof(struct reset_led_data) * num_leds); -+} -+ -+static struct reset_leds_priv *reset_leds_create(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct fwnode_handle *child; -+ struct reset_leds_priv *priv; -+ int count, ret; -+ -+ count = device_get_child_node_count(dev); -+ if (!count) -+ return ERR_PTR(-ENODEV); -+ -+ priv = devm_kzalloc(dev, sizeof_reset_leds_priv(count), GFP_KERNEL); -+ if (!priv) -+ return ERR_PTR(-ENOMEM); -+ -+ device_for_each_child_node(dev, child) { -+ struct reset_led_data *led = &priv->leds[priv->num_leds]; -+ struct device_node *np = to_of_node(child); -+ -+ ret = fwnode_property_read_string(child, "label", &led->cdev.name); -+ if (!led->cdev.name) { -+ fwnode_handle_put(child); -+ return ERR_PTR(-EINVAL); -+ } -+ led->rst = __of_reset_control_get(np, NULL, 0, 0, 0); -+ if (IS_ERR(led->rst)) -+ return ERR_PTR(-EINVAL); -+ -+ led->cdev.brightness_set = reset_led_set; -+ ret = devm_of_led_classdev_register(&pdev->dev, np, &led->cdev); -+ if (ret < 0) -+ return ERR_PTR(ret); -+ led->cdev.dev->of_node = np; -+ priv->num_leds++; -+ } -+ -+ return priv; -+} -+ -+static const struct of_device_id of_reset_leds_match[] = { -+ { .compatible = "reset-leds", }, -+ {}, -+}; -+ -+MODULE_DEVICE_TABLE(of, of_reset_leds_match); -+ -+static int reset_led_probe(struct platform_device *pdev) -+{ -+ struct reset_leds_priv *priv; -+ -+ priv = reset_leds_create(pdev); -+ if (IS_ERR(priv)) -+ return PTR_ERR(priv); -+ -+ platform_set_drvdata(pdev, priv); -+ -+ return 0; -+} -+ -+static void reset_led_shutdown(struct platform_device *pdev) -+{ -+ struct reset_leds_priv *priv = platform_get_drvdata(pdev); -+ int i; -+ -+ for (i = 0; i < priv->num_leds; i++) { -+ struct reset_led_data *led = &priv->leds[i]; -+ -+ if (!(led->cdev.flags & LED_RETAIN_AT_SHUTDOWN)) -+ reset_led_set(&led->cdev, LED_OFF); -+ } -+} -+ -+static struct platform_driver reset_led_driver = { -+ .probe = reset_led_probe, -+ .shutdown = reset_led_shutdown, -+ .driver = { -+ .name = "leds-reset", -+ .of_match_table = of_reset_leds_match, -+ }, -+}; -+ -+module_platform_driver(reset_led_driver); -+ -+MODULE_AUTHOR("John Crispin <john@phrozen.org>"); -+MODULE_DESCRIPTION("reset controller LED driver"); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS("platform:leds-reset"); ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -73,6 +73,7 @@ obj-$(CONFIG_LEDS_PM8058) += leds-pm805 - obj-$(CONFIG_LEDS_MLXCPLD) += leds-mlxcpld.o - obj-$(CONFIG_LEDS_NIC78BX) += leds-nic78bx.o - obj-$(CONFIG_LEDS_MT6323) += leds-mt6323.o -+obj-$(CONFIG_LEDS_RESET) += leds-reset.o - - # LED SPI Drivers - obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o diff --git a/target/linux/ath79/patches-4.14/0004-phy-add-ath79-usb-phys.patch b/target/linux/ath79/patches-4.14/0004-phy-add-ath79-usb-phys.patch deleted file mode 100644 index 6280baf..0000000 --- a/target/linux/ath79/patches-4.14/0004-phy-add-ath79-usb-phys.patch +++ /dev/null @@ -1,320 +0,0 @@ -From 08c9d6ceef01893678a5d2e8a15517c745417f21 Mon Sep 17 00:00:00 2001 -From: John Crispin <john@phrozen.org> -Date: Tue, 6 Mar 2018 10:04:05 +0100 -Subject: [PATCH 04/27] phy: add ath79 usb phys - -Signed-off-by: John Crispin <john@phrozen.org> ---- - drivers/phy/Kconfig | 16 ++++++ - drivers/phy/Makefile | 2 + - drivers/phy/phy-ar7100-usb.c | 124 +++++++++++++++++++++++++++++++++++++++++++ - drivers/phy/phy-ar7200-usb.c | 108 +++++++++++++++++++++++++++++++++++++ - 4 files changed, 250 insertions(+) - create mode 100644 drivers/phy/phy-ar7100-usb.c - create mode 100644 drivers/phy/phy-ar7200-usb.c - ---- a/drivers/phy/Kconfig -+++ b/drivers/phy/Kconfig -@@ -15,6 +15,22 @@ config GENERIC_PHY - phy users can obtain reference to the PHY. All the users of this - framework should select this config. - -+config PHY_AR7100_USB -+ tristate "Atheros AR7100 USB PHY driver" -+ depends on ATH79 || COMPILE_TEST -+ default y if USB_EHCI_HCD_PLATFORM -+ select PHY_SIMPLE -+ help -+ Enable this to support the USB PHY on Atheros AR7100 SoCs. -+ -+config PHY_AR7200_USB -+ tristate "Atheros AR7200 USB PHY driver" -+ depends on ATH79 || COMPILE_TEST -+ default y if USB_EHCI_HCD_PLATFORM -+ select PHY_SIMPLE -+ help -+ Enable this to support the USB PHY on Atheros AR7200 SoCs. -+ - config PHY_LPC18XX_USB_OTG - tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver" - depends on OF && (ARCH_LPC18XX || COMPILE_TEST) ---- a/drivers/phy/Makefile -+++ b/drivers/phy/Makefile -@@ -4,6 +4,8 @@ - # - - obj-$(CONFIG_GENERIC_PHY) += phy-core.o -+obj-$(CONFIG_PHY_AR7100_USB) += phy-ar7100-usb.o -+obj-$(CONFIG_PHY_AR7200_USB) += phy-ar7200-usb.o - obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o - obj-$(CONFIG_PHY_XGENE) += phy-xgene.o - obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o ---- /dev/null -+++ b/drivers/phy/phy-ar7100-usb.c -@@ -0,0 +1,140 @@ -+/* -+ * Copyright (C) 2018 John Crispin <john@phrozen.org> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/phy/phy.h> -+#include <linux/delay.h> -+#include <linux/reset.h> -+#include <linux/of_gpio.h> -+ -+#include <asm/mach-ath79/ath79.h> -+#include <asm/mach-ath79/ar71xx_regs.h> -+ -+struct ar7100_usb_phy { -+ struct reset_control *rst_phy; -+ struct reset_control *rst_host; -+ struct reset_control *rst_ohci_dll; -+ void __iomem *io_base; -+ struct phy *phy; -+ int gpio; -+}; -+ -+static int ar7100_usb_phy_power_off(struct phy *phy) -+{ -+ struct ar7100_usb_phy *priv = phy_get_drvdata(phy); -+ int err = 0; -+ -+ err |= reset_control_assert(priv->rst_host); -+ err |= reset_control_assert(priv->rst_phy); -+ err |= reset_control_assert(priv->rst_ohci_dll); -+ -+ return err; -+} -+ -+static int ar7100_usb_phy_power_on(struct phy *phy) -+{ -+ struct ar7100_usb_phy *priv = phy_get_drvdata(phy); -+ int err = 0; -+ -+ err |= ar7100_usb_phy_power_off(phy); -+ mdelay(100); -+ err |= reset_control_deassert(priv->rst_ohci_dll); -+ err |= reset_control_deassert(priv->rst_phy); -+ err |= reset_control_deassert(priv->rst_host); -+ mdelay(500); -+ iowrite32(0xf0000, priv->io_base + AR71XX_USB_CTRL_REG_CONFIG); -+ iowrite32(0x20c00, priv->io_base + AR71XX_USB_CTRL_REG_FLADJ); -+ -+ return err; -+} -+ -+static const struct phy_ops ar7100_usb_phy_ops = { -+ .power_on = ar7100_usb_phy_power_on, -+ .power_off = ar7100_usb_phy_power_off, -+ .owner = THIS_MODULE, -+}; -+ -+static int ar7100_usb_phy_probe(struct platform_device *pdev) -+{ -+ struct phy_provider *phy_provider; -+ struct resource *res; -+ struct ar7100_usb_phy *priv; -+ -+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ priv->io_base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(priv->io_base)) -+ return PTR_ERR(priv->io_base); -+ -+ priv->rst_phy = devm_reset_control_get(&pdev->dev, "usb-phy"); -+ if (IS_ERR(priv->rst_phy)) { -+ dev_err(&pdev->dev, "phy reset is missing\n"); -+ return PTR_ERR(priv->rst_phy); -+ } -+ -+ priv->rst_host = devm_reset_control_get(&pdev->dev, "usb-host"); -+ if (IS_ERR(priv->rst_host)) { -+ dev_err(&pdev->dev, "host reset is missing\n"); -+ return PTR_ERR(priv->rst_host); -+ } -+ -+ priv->rst_ohci_dll = devm_reset_control_get(&pdev->dev, "usb-ohci-dll"); -+ if (IS_ERR(priv->rst_ohci_dll)) { -+ dev_err(&pdev->dev, "ohci-dll reset is missing\n"); -+ return PTR_ERR(priv->rst_host); -+ } -+ -+ priv->phy = devm_phy_create(&pdev->dev, NULL, &ar7100_usb_phy_ops); -+ if (IS_ERR(priv->phy)) { -+ dev_err(&pdev->dev, "failed to create PHY\n"); -+ return PTR_ERR(priv->phy); -+ } -+ -+ priv->gpio = of_get_gpio(pdev->dev.of_node, 0); -+ if (priv->gpio >= 0) { -+ int ret = devm_gpio_request(&pdev->dev, priv->gpio, dev_name(&pdev->dev)); -+ -+ if (ret) { -+ dev_err(&pdev->dev, "failed to request gpio\n"); -+ return ret; -+ } -+ gpio_export_with_name(priv->gpio, 0, dev_name(&pdev->dev)); -+ gpio_set_value(priv->gpio, 1); -+ } -+ -+ phy_set_drvdata(priv->phy, priv); -+ -+ phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate); -+ -+ -+ return PTR_ERR_OR_ZERO(phy_provider); -+} -+ -+static const struct of_device_id ar7100_usb_phy_of_match[] = { -+ { .compatible = "qca,ar7100-usb-phy" }, -+ {} -+}; -+MODULE_DEVICE_TABLE(of, ar7100_usb_phy_of_match); -+ -+static struct platform_driver ar7100_usb_phy_driver = { -+ .probe = ar7100_usb_phy_probe, -+ .driver = { -+ .of_match_table = ar7100_usb_phy_of_match, -+ .name = "ar7100-usb-phy", -+ } -+}; -+module_platform_driver(ar7100_usb_phy_driver); -+ -+MODULE_DESCRIPTION("ATH79 USB PHY driver"); -+MODULE_AUTHOR("Alban Bedel <albeu@free.fr>"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/drivers/phy/phy-ar7200-usb.c -@@ -0,0 +1,123 @@ -+/* -+ * Copyright (C) 2015 Alban Bedel <albeu@free.fr> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/phy/phy.h> -+#include <linux/reset.h> -+#include <linux/of_gpio.h> -+ -+struct ar7200_usb_phy { -+ struct reset_control *rst_phy; -+ struct reset_control *suspend_override; -+ struct phy *phy; -+ int gpio; -+}; -+ -+static int ar7200_usb_phy_power_on(struct phy *phy) -+{ -+ struct ar7200_usb_phy *priv = phy_get_drvdata(phy); -+ int err = 0; -+ -+ if (priv->rst_phy) -+ err = reset_control_deassert(priv->rst_phy); -+ if (!err && priv->suspend_override) -+ err = reset_control_assert(priv->suspend_override); -+ if (err && priv->rst_phy) -+ err = reset_control_assert(priv->rst_phy); -+ -+ return err; -+} -+ -+static int ar7200_usb_phy_power_off(struct phy *phy) -+{ -+ struct ar7200_usb_phy *priv = phy_get_drvdata(phy); -+ int err = 0; -+ -+ if (priv->suspend_override) -+ err = reset_control_deassert(priv->suspend_override); -+ if (priv->rst_phy) -+ err |= reset_control_assert(priv->rst_phy); -+ -+ return err; -+} -+ -+static const struct phy_ops ar7200_usb_phy_ops = { -+ .power_on = ar7200_usb_phy_power_on, -+ .power_off = ar7200_usb_phy_power_off, -+ .owner = THIS_MODULE, -+}; -+ -+static int ar7200_usb_phy_probe(struct platform_device *pdev) -+{ -+ struct phy_provider *phy_provider; -+ struct ar7200_usb_phy *priv; -+ -+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ -+ priv->rst_phy = devm_reset_control_get(&pdev->dev, "usb-phy"); -+ if (IS_ERR(priv->rst_phy)) { -+ dev_err(&pdev->dev, "phy reset is missing\n"); -+ return PTR_ERR(priv->rst_phy); -+ } -+ -+ priv->suspend_override = devm_reset_control_get_optional( -+ &pdev->dev, "usb-suspend-override"); -+ if (IS_ERR(priv->suspend_override)) { -+ if (PTR_ERR(priv->suspend_override) == -ENOENT) -+ priv->suspend_override = NULL; -+ else -+ return PTR_ERR(priv->suspend_override); -+ } -+ -+ priv->phy = devm_phy_create(&pdev->dev, NULL, &ar7200_usb_phy_ops); -+ if (IS_ERR(priv->phy)) { -+ dev_err(&pdev->dev, "failed to create PHY\n"); -+ return PTR_ERR(priv->phy); -+ } -+ -+ priv->gpio = of_get_gpio(pdev->dev.of_node, 0); -+ if (priv->gpio >= 0) { -+ int ret = devm_gpio_request(&pdev->dev, priv->gpio, dev_name(&pdev->dev)); -+ -+ if (ret) { -+ dev_err(&pdev->dev, "failed to request gpio\n"); -+ return ret; -+ } -+ gpio_export_with_name(priv->gpio, 0, dev_name(&pdev->dev)); -+ gpio_set_value(priv->gpio, 1); -+ } -+ -+ phy_set_drvdata(priv->phy, priv); -+ -+ phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate); -+ -+ return PTR_ERR_OR_ZERO(phy_provider); -+} -+ -+static const struct of_device_id ar7200_usb_phy_of_match[] = { -+ { .compatible = "qca,ar7200-usb-phy" }, -+ {} -+}; -+MODULE_DEVICE_TABLE(of, ar7200_usb_phy_of_match); -+ -+static struct platform_driver ar7200_usb_phy_driver = { -+ .probe = ar7200_usb_phy_probe, -+ .driver = { -+ .of_match_table = ar7200_usb_phy_of_match, -+ .name = "ar7200-usb-phy", -+ } -+}; -+module_platform_driver(ar7200_usb_phy_driver); -+ -+MODULE_DESCRIPTION("ATH79 USB PHY driver"); -+MODULE_AUTHOR("Alban Bedel <albeu@free.fr>"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/ath79/patches-4.14/0005-usb-add-more-OF-quirk-properties.patch b/target/linux/ath79/patches-4.14/0005-usb-add-more-OF-quirk-properties.patch deleted file mode 100644 index ec1bc3f..0000000 --- a/target/linux/ath79/patches-4.14/0005-usb-add-more-OF-quirk-properties.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 2201818e5bd33f389beceb3943fdfcf5a698fc5b Mon Sep 17 00:00:00 2001 -From: John Crispin <john@phrozen.org> -Date: Tue, 6 Mar 2018 10:01:43 +0100 -Subject: [PATCH 05/27] usb: add more OF/quirk properties - -Signed-off-by: John Crispin <john@phrozen.org> ---- - drivers/usb/host/ehci-platform.c | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/drivers/usb/host/ehci-platform.c -+++ b/drivers/usb/host/ehci-platform.c -@@ -187,6 +187,11 @@ static int ehci_platform_probe(struct pl - ehci = hcd_to_ehci(hcd); - - if (pdata == &ehci_platform_defaults && dev->dev.of_node) { -+ of_property_read_u32(dev->dev.of_node, "caps-offset", &pdata->caps_offset); -+ -+ if (of_property_read_bool(dev->dev.of_node, "has-synopsys-hc-bug")) -+ pdata->has_synopsys_hc_bug = 1; -+ - if (of_property_read_bool(dev->dev.of_node, "big-endian-regs")) - ehci->big_endian_mmio = 1; - diff --git a/target/linux/ath79/patches-4.14/0006-usb-drop-deprecated-symbols.patch b/target/linux/ath79/patches-4.14/0006-usb-drop-deprecated-symbols.patch deleted file mode 100644 index a97fab7..0000000 --- a/target/linux/ath79/patches-4.14/0006-usb-drop-deprecated-symbols.patch +++ /dev/null @@ -1,51 +0,0 @@ -From bd17da5b6297e0e52b787049292d076ad415362a Mon Sep 17 00:00:00 2001 -From: John Crispin <john@phrozen.org> -Date: Tue, 6 Mar 2018 10:04:54 +0100 -Subject: [PATCH 06/27] usb: drop deprecated symbols - -Signed-off-by: John Crispin <john@phrozen.org> ---- - drivers/usb/host/Kconfig | 25 ------------------------- - 1 file changed, 25 deletions(-) - ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -297,19 +297,6 @@ config USB_CNS3XXX_EHCI - It is needed for high-speed (480Mbit/sec) USB 2.0 device - support. - --config USB_EHCI_ATH79 -- bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)" -- depends on (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X) -- select USB_EHCI_ROOT_HUB_TT -- select USB_EHCI_HCD_PLATFORM -- default y -- ---help--- -- This option is deprecated now and the driver was removed, use -- USB_EHCI_HCD_PLATFORM instead. -- -- Enables support for the built-in EHCI controller present -- on the Atheros AR7XXX/AR9XXX SoCs. -- - config USB_EHCI_HCD_PLATFORM - tristate "Generic EHCI driver for a platform device" - default n -@@ -493,18 +480,6 @@ config USB_OHCI_HCD_DAVINCI - controller. This driver cannot currently be a loadable - module because it lacks a proper PHY abstraction. - --config USB_OHCI_ATH79 -- bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)" -- depends on (SOC_AR71XX || SOC_AR724X) -- select USB_OHCI_HCD_PLATFORM -- default y -- help -- This option is deprecated now and the driver was removed, use -- USB_OHCI_HCD_PLATFORM instead. -- -- Enables support for the built-in OHCI controller present on the -- Atheros AR71XX/AR7240 SoCs. -- - config USB_OHCI_HCD_PPC_OF_BE - bool "OHCI support for OF platform bus (big endian)" - depends on PPC diff --git a/target/linux/ath79/patches-4.14/0007-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch b/target/linux/ath79/patches-4.14/0007-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch deleted file mode 100644 index 72a7a5e..0000000 --- a/target/linux/ath79/patches-4.14/0007-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch +++ /dev/null @@ -1,130 +0,0 @@ -From cb376159800b9b44be76949c3aee89eb06d29faa Mon Sep 17 00:00:00 2001 -From: John Crispin <john@phrozen.org> -Date: Tue, 6 Mar 2018 09:55:13 +0100 -Subject: [PATCH 07/27] irqchip/irq-ath79-intc: add irq cascade driver for - QCA9556 SoCs - -Signed-off-by: John Crispin <john@phrozen.org> ---- - drivers/irqchip/Makefile | 1 + - drivers/irqchip/irq-ath79-intc.c | 104 +++++++++++++++++++++++++++++++++++++++ - 2 files changed, 105 insertions(+) - create mode 100644 drivers/irqchip/irq-ath79-intc.c - ---- a/drivers/irqchip/Makefile -+++ b/drivers/irqchip/Makefile -@@ -3,6 +3,7 @@ obj-$(CONFIG_IRQCHIP) += irqchip.o - - obj-$(CONFIG_ALPINE_MSI) += irq-alpine-msi.o - obj-$(CONFIG_ATH79) += irq-ath79-cpu.o -+obj-$(CONFIG_ATH79) += irq-ath79-intc.o - obj-$(CONFIG_ATH79) += irq-ath79-misc.o - obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o - obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2836.o ---- /dev/null -+++ b/drivers/irqchip/irq-ath79-intc.c -@@ -0,0 +1,104 @@ -+/* -+ * Atheros AR71xx/AR724x/AR913x specific interrupt handling -+ * -+ * Copyright (C) 2018 John Crispin <john@phrozen.org> -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include <linux/interrupt.h> -+#include <linux/irqchip.h> -+#include <linux/of.h> -+#include <linux/of_irq.h> -+#include <linux/irqdomain.h> -+ -+#include <asm/irq_cpu.h> -+#include <asm/mach-ath79/ath79.h> -+#include <asm/mach-ath79/ar71xx_regs.h> -+ -+#define ATH79_MAX_INTC_CASCADE 3 -+ -+struct ath79_intc { -+ struct irq_chip chip; -+ u32 irq; -+ u32 pending_mask; -+ u32 irq_mask[ATH79_MAX_INTC_CASCADE]; -+}; -+ -+static void ath79_intc_irq_handler(struct irq_desc *desc) -+{ -+ struct irq_domain *domain = irq_desc_get_handler_data(desc); -+ struct ath79_intc *intc = domain->host_data; -+ u32 pending; -+ -+ pending = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS); -+ pending &= intc->pending_mask; -+ -+ if (pending) { -+ int i; -+ -+ for (i = 0; i < domain->hwirq_max; i++) -+ if (pending & intc->irq_mask[i]) -+ generic_handle_irq(irq_find_mapping(domain, i)); -+ } else { -+ spurious_interrupt(); -+ } -+} -+ -+static void ath79_intc_irq_unmask(struct irq_data *d) -+{ -+} -+ -+static void ath79_intc_irq_mask(struct irq_data *d) -+{ -+} -+ -+static int ath79_intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) -+{ -+ struct ath79_intc *intc = d->host_data; -+ -+ irq_set_chip_and_handler(irq, &intc->chip, handle_level_irq); -+ -+ return 0; -+} -+ -+static const struct irq_domain_ops ath79_irq_domain_ops = { -+ .xlate = irq_domain_xlate_onecell, -+ .map = ath79_intc_map, -+}; -+ -+static int __init qca9556_intc_of_init( -+ struct device_node *node, struct device_node *parent) -+{ -+ struct irq_domain *domain; -+ struct ath79_intc *intc; -+ int cnt, i; -+ -+ cnt = of_property_count_u32_elems(node, "qcom,pending-bits"); -+ if (cnt > ATH79_MAX_INTC_CASCADE) -+ panic("Too many INTC pending bits\n"); -+ -+ intc = kzalloc(sizeof(*intc), GFP_KERNEL); -+ if (!intc) -+ panic("Failed to allocate INTC memory\n"); -+ intc->chip.name = "INTC"; -+ intc->chip.irq_unmask = ath79_intc_irq_unmask, -+ intc->chip.irq_mask = ath79_intc_irq_mask, -+ -+ of_property_read_u32_array(node, "qcom,pending-bits", intc->irq_mask, cnt); -+ for (i = 0; i < cnt; i++) -+ intc->pending_mask |= intc->irq_mask[i]; -+ -+ intc->irq = irq_of_parse_and_map(node, 0); -+ if (!intc->irq) -+ panic("Failed to get INTC IRQ"); -+ -+ domain = irq_domain_add_linear(node, cnt, &ath79_irq_domain_ops, intc); -+ irq_set_chained_handler_and_data(intc->irq, ath79_intc_irq_handler, domain); -+ -+ return 0; -+} -+IRQCHIP_DECLARE(qca9556_intc, "qcom,qca9556-intc", -+ qca9556_intc_of_init); diff --git a/target/linux/ath79/patches-4.14/0008-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch b/target/linux/ath79/patches-4.14/0008-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch deleted file mode 100644 index 84e066e..0000000 --- a/target/linux/ath79/patches-4.14/0008-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch +++ /dev/null @@ -1,23 +0,0 @@ -From f711421eb5f6f790f1ebc09a13ae4aed8ba5f67b Mon Sep 17 00:00:00 2001 -From: John Crispin <john@phrozen.org> -Date: Tue, 6 Mar 2018 09:58:19 +0100 -Subject: [PATCH 08/27] irqchip/irq-ath79-cpu: drop !OF init helper - -Signed-off-by: John Crispin <john@phrozen.org> ---- - drivers/irqchip/irq-ath79-cpu.c | 7 ------- - 1 file changed, 7 deletions(-) - ---- a/drivers/irqchip/irq-ath79-cpu.c -+++ b/drivers/irqchip/irq-ath79-cpu.c -@@ -88,10 +88,3 @@ static int __init ar79_cpu_intc_of_init( - } - IRQCHIP_DECLARE(ar79_cpu_intc, "qca,ar7100-cpu-intc", - ar79_cpu_intc_of_init); -- --void __init ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3) --{ -- irq_wb_chan[2] = irq_wb_chan2; -- irq_wb_chan[3] = irq_wb_chan3; -- mips_cpu_irq_init(); --} diff --git a/target/linux/ath79/patches-4.14/0009-MIPS-ath79-add-lots-of-missing-registers.patch b/target/linux/ath79/patches-4.14/0009-MIPS-ath79-add-lots-of-missing-registers.patch deleted file mode 100644 index 5963ee8..0000000 --- a/target/linux/ath79/patches-4.14/0009-MIPS-ath79-add-lots-of-missing-registers.patch +++ /dev/null @@ -1,971 +0,0 @@ -From 3ea2bff4ed3ce74dc4303aa20f5e906e78352f6b Mon Sep 17 00:00:00 2001 -From: John Crispin <john@phrozen.org> -Date: Tue, 6 Mar 2018 10:06:10 +0100 -Subject: [PATCH 09/27] MIPS: ath79: add lots of missing registers - -Signed-off-by: John Crispin <john@phrozen.org> ---- - arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 773 ++++++++++++++++++++++++- - 1 file changed, 771 insertions(+), 2 deletions(-) - ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -20,6 +20,10 @@ - #include <linux/bitops.h> - - #define AR71XX_APB_BASE 0x18000000 -+#define AR71XX_GE0_BASE 0x19000000 -+#define AR71XX_GE0_SIZE 0x10000 -+#define AR71XX_GE1_BASE 0x1a000000 -+#define AR71XX_GE1_SIZE 0x10000 - #define AR71XX_EHCI_BASE 0x1b000000 - #define AR71XX_EHCI_SIZE 0x1000 - #define AR71XX_OHCI_BASE 0x1c000000 -@@ -39,6 +43,8 @@ - #define AR71XX_PLL_SIZE 0x100 - #define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000) - #define AR71XX_RESET_SIZE 0x100 -+#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000) -+#define AR71XX_MII_SIZE 0x100 - - #define AR71XX_PCI_MEM_BASE 0x10000000 - #define AR71XX_PCI_MEM_SIZE 0x07000000 -@@ -81,18 +87,39 @@ - - #define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000) - #define AR933X_UART_SIZE 0x14 -+#define AR933X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -+#define AR933X_GMAC_SIZE 0x04 - #define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) - #define AR933X_WMAC_SIZE 0x20000 - #define AR933X_EHCI_BASE 0x1b000000 - #define AR933X_EHCI_SIZE 0x1000 - -+#define AR934X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -+#define AR934X_GMAC_SIZE 0x14 - #define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) - #define AR934X_WMAC_SIZE 0x20000 - #define AR934X_EHCI_BASE 0x1b000000 - #define AR934X_EHCI_SIZE 0x200 -+#define AR934X_NFC_BASE 0x1b000200 -+#define AR934X_NFC_SIZE 0xb8 - #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000) - #define AR934X_SRIF_SIZE 0x1000 - -+#define QCA953X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -+#define QCA953X_GMAC_SIZE 0x14 -+#define QCA953X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) -+#define QCA953X_WMAC_SIZE 0x20000 -+#define QCA953X_EHCI_BASE 0x1b000000 -+#define QCA953X_EHCI_SIZE 0x200 -+#define QCA953X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000) -+#define QCA953X_SRIF_SIZE 0x1000 -+ -+#define QCA953X_PCI_CFG_BASE0 0x14000000 -+#define QCA953X_PCI_CTRL_BASE0 (AR71XX_APB_BASE + 0x000f0000) -+#define QCA953X_PCI_CRP_BASE0 (AR71XX_APB_BASE + 0x000c0000) -+#define QCA953X_PCI_MEM_BASE0 0x10000000 -+#define QCA953X_PCI_MEM_SIZE 0x02000000 -+ - #define QCA955X_PCI_MEM_BASE0 0x10000000 - #define QCA955X_PCI_MEM_BASE1 0x12000000 - #define QCA955X_PCI_MEM_SIZE 0x02000000 -@@ -106,11 +133,72 @@ - #define QCA955X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000) - #define QCA955X_PCI_CTRL_SIZE 0x100 - -+#define QCA955X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -+#define QCA955X_GMAC_SIZE 0x40 - #define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) - #define QCA955X_WMAC_SIZE 0x20000 - #define QCA955X_EHCI0_BASE 0x1b000000 - #define QCA955X_EHCI1_BASE 0x1b400000 - #define QCA955X_EHCI_SIZE 0x1000 -+#define QCA955X_NFC_BASE 0x1b800200 -+#define QCA955X_NFC_SIZE 0xb8 -+ -+#define QCA956X_PCI_MEM_BASE1 0x12000000 -+#define QCA956X_PCI_MEM_SIZE 0x02000000 -+#define QCA956X_PCI_CFG_BASE1 0x16000000 -+#define QCA956X_PCI_CFG_SIZE 0x1000 -+#define QCA956X_PCI_CRP_BASE1 (AR71XX_APB_BASE + 0x00250000) -+#define QCA956X_PCI_CRP_SIZE 0x1000 -+#define QCA956X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000) -+#define QCA956X_PCI_CTRL_SIZE 0x100 -+ -+#define QCA956X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) -+#define QCA956X_WMAC_SIZE 0x20000 -+#define QCA956X_EHCI0_BASE 0x1b000000 -+#define QCA956X_EHCI1_BASE 0x1b400000 -+#define QCA956X_EHCI_SIZE 0x200 -+#define QCA956X_GMAC_SGMII_BASE (AR71XX_APB_BASE + 0x00070000) -+#define QCA956X_GMAC_SGMII_SIZE 0x64 -+#define QCA956X_PLL_BASE (AR71XX_APB_BASE + 0x00050000) -+#define QCA956X_PLL_SIZE 0x50 -+#define QCA956X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -+#define QCA956X_GMAC_SIZE 0x64 -+ -+/* -+ * Hidden Registers -+ */ -+#define QCA956X_MAC_CFG_BASE 0xb9000000 -+#define QCA956X_MAC_CFG_SIZE 0x64 -+ -+#define QCA956X_MAC_CFG1_REG 0x00 -+#define QCA956X_MAC_CFG1_SOFT_RST BIT(31) -+#define QCA956X_MAC_CFG1_RX_RST BIT(19) -+#define QCA956X_MAC_CFG1_TX_RST BIT(18) -+#define QCA956X_MAC_CFG1_LOOPBACK BIT(8) -+#define QCA956X_MAC_CFG1_RX_EN BIT(2) -+#define QCA956X_MAC_CFG1_TX_EN BIT(0) -+ -+#define QCA956X_MAC_CFG2_REG 0x04 -+#define QCA956X_MAC_CFG2_IF_1000 BIT(9) -+#define QCA956X_MAC_CFG2_IF_10_100 BIT(8) -+#define QCA956X_MAC_CFG2_HUGE_FRAME_EN BIT(5) -+#define QCA956X_MAC_CFG2_LEN_CHECK BIT(4) -+#define QCA956X_MAC_CFG2_PAD_CRC_EN BIT(2) -+#define QCA956X_MAC_CFG2_FDX BIT(0) -+ -+#define QCA956X_MAC_MII_MGMT_CFG_REG 0x20 -+#define QCA956X_MGMT_CFG_CLK_DIV_20 0x07 -+ -+#define QCA956X_MAC_FIFO_CFG0_REG 0x48 -+#define QCA956X_MAC_FIFO_CFG1_REG 0x4c -+#define QCA956X_MAC_FIFO_CFG2_REG 0x50 -+#define QCA956X_MAC_FIFO_CFG3_REG 0x54 -+#define QCA956X_MAC_FIFO_CFG4_REG 0x58 -+#define QCA956X_MAC_FIFO_CFG5_REG 0x5c -+ -+#define QCA956X_DAM_RESET_OFFSET 0xb90001bc -+#define QCA956X_DAM_RESET_SIZE 0x4 -+#define QCA956X_INLINE_CHKSUM_ENG BIT(27) - - /* - * DDR_CTRL block -@@ -149,6 +237,12 @@ - #define AR934X_DDR_REG_FLUSH_PCIE 0xa8 - #define AR934X_DDR_REG_FLUSH_WMAC 0xac - -+#define QCA953X_DDR_REG_FLUSH_GE0 0x9c -+#define QCA953X_DDR_REG_FLUSH_GE1 0xa0 -+#define QCA953X_DDR_REG_FLUSH_USB 0xa4 -+#define QCA953X_DDR_REG_FLUSH_PCIE 0xa8 -+#define QCA953X_DDR_REG_FLUSH_WMAC 0xac -+ - /* - * PLL block - */ -@@ -166,8 +260,14 @@ - #define AR71XX_AHB_DIV_SHIFT 20 - #define AR71XX_AHB_DIV_MASK 0x7 - -+#define AR71XX_ETH0_PLL_SHIFT 17 -+#define AR71XX_ETH1_PLL_SHIFT 19 -+ - #define AR724X_PLL_REG_CPU_CONFIG 0x00 --#define AR724X_PLL_REG_PCIE_CONFIG 0x18 -+#define AR724X_PLL_REG_PCIE_CONFIG 0x10 -+ -+#define AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS BIT(16) -+#define AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET BIT(25) - - #define AR724X_PLL_FB_SHIFT 0 - #define AR724X_PLL_FB_MASK 0x3ff -@@ -178,6 +278,8 @@ - #define AR724X_DDR_DIV_SHIFT 22 - #define AR724X_DDR_DIV_MASK 0x3 - -+#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c -+ - #define AR913X_PLL_REG_CPU_CONFIG 0x00 - #define AR913X_PLL_REG_ETH_CONFIG 0x04 - #define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14 -@@ -190,6 +292,9 @@ - #define AR913X_AHB_DIV_SHIFT 19 - #define AR913X_AHB_DIV_MASK 0x1 - -+#define AR913X_ETH0_PLL_SHIFT 20 -+#define AR913X_ETH1_PLL_SHIFT 22 -+ - #define AR933X_PLL_CPU_CONFIG_REG 0x00 - #define AR933X_PLL_CLOCK_CTRL_REG 0x08 - -@@ -211,6 +316,8 @@ - #define AR934X_PLL_CPU_CONFIG_REG 0x00 - #define AR934X_PLL_DDR_CONFIG_REG 0x04 - #define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08 -+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_REG 0x24 -+#define AR934X_PLL_ETH_XMII_CONTROL_REG 0x2c - - #define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 - #define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f -@@ -243,9 +350,52 @@ - #define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) - #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) - -+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6) -+ -+#define QCA953X_PLL_CPU_CONFIG_REG 0x00 -+#define QCA953X_PLL_DDR_CONFIG_REG 0x04 -+#define QCA953X_PLL_CLK_CTRL_REG 0x08 -+#define QCA953X_PLL_SWITCH_CLOCK_CONTROL_REG 0x24 -+#define QCA953X_PLL_ETH_XMII_CONTROL_REG 0x2c -+#define QCA953X_PLL_ETH_SGMII_CONTROL_REG 0x48 -+ -+#define QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 -+#define QCA953X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f -+#define QCA953X_PLL_CPU_CONFIG_NINT_SHIFT 6 -+#define QCA953X_PLL_CPU_CONFIG_NINT_MASK 0x3f -+#define QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT 12 -+#define QCA953X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f -+#define QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19 -+#define QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7 -+ -+#define QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT 0 -+#define QCA953X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff -+#define QCA953X_PLL_DDR_CONFIG_NINT_SHIFT 10 -+#define QCA953X_PLL_DDR_CONFIG_NINT_MASK 0x3f -+#define QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT 16 -+#define QCA953X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f -+#define QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23 -+#define QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7 -+ -+#define QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2) -+#define QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3) -+#define QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4) -+#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5 -+#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f -+#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10 -+#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f -+#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15 -+#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f -+#define QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20) -+#define QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) -+#define QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) -+ - #define QCA955X_PLL_CPU_CONFIG_REG 0x00 - #define QCA955X_PLL_DDR_CONFIG_REG 0x04 - #define QCA955X_PLL_CLK_CTRL_REG 0x08 -+#define QCA955X_PLL_ETH_XMII_CONTROL_REG 0x28 -+#define QCA955X_PLL_ETH_SGMII_CONTROL_REG 0x48 -+#define QCA955X_PLL_ETH_SGMII_SERDES_REG 0x4c - - #define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 - #define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f -@@ -278,6 +428,81 @@ - #define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) - #define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) - -+#define QCA955X_PLL_ETH_SGMII_SERDES_LOCK_DETECT BIT(2) -+#define QCA955X_PLL_ETH_SGMII_SERDES_PLL_REFCLK BIT(1) -+#define QCA955X_PLL_ETH_SGMII_SERDES_EN_PLL BIT(0) -+ -+#define QCA956X_PLL_CPU_CONFIG_REG 0x00 -+#define QCA956X_PLL_CPU_CONFIG1_REG 0x04 -+#define QCA956X_PLL_DDR_CONFIG_REG 0x08 -+#define QCA956X_PLL_DDR_CONFIG1_REG 0x0c -+#define QCA956X_PLL_CLK_CTRL_REG 0x10 -+#define QCA956X_PLL_SWITCH_CLOCK_CONTROL_REG 0x28 -+#define QCA956X_PLL_ETH_XMII_CONTROL_REG 0x30 -+#define QCA956X_PLL_ETH_SGMII_SERDES_REG 0x4c -+ -+#define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT 12 -+#define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f -+#define QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19 -+#define QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7 -+ -+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT 0 -+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK 0x1f -+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT 5 -+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK 0x1fff -+#define QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT 18 -+#define QCA956X_PLL_CPU_CONFIG1_NINT_MASK 0x1ff -+ -+#define QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT 16 -+#define QCA956X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f -+#define QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23 -+#define QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7 -+ -+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT 0 -+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK 0x1f -+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT 5 -+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK 0x1fff -+#define QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT 18 -+#define QCA956X_PLL_DDR_CONFIG1_NINT_MASK 0x1ff -+ -+#define QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2) -+#define QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3) -+#define QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4) -+#define QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5 -+#define QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f -+#define QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10 -+#define QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f -+#define QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15 -+#define QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f -+#define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL BIT(20) -+#define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL BIT(21) -+#define QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) -+ -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_I2C_CLK_SELB BIT(5) -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL0_1 BIT(6) -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_UART1_CLK_SEL BIT(7) -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_USB_REFCLK_FREQ_SEL_SHIFT 8 -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_USB_REFCLK_FREQ_SEL_MASK 0xf -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_EN_PLL_TOP BIT(12) -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL0_2 BIT(13) -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL1_1 BIT(14) -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL1_2 BIT(15) -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_SWITCH_FUNC_TST_MODE BIT(16) -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_EEE_ENABLE BIT(17) -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_OEN_CLK125M_PLL BIT(18) -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_SWITCHCLK_SEL BIT(19) -+ -+#define QCA956X_PLL_ETH_XMII_TX_INVERT BIT(1) -+#define QCA956X_PLL_ETH_XMII_GIGE BIT(25) -+#define QCA956X_PLL_ETH_XMII_RX_DELAY_SHIFT 28 -+#define QCA956X_PLL_ETH_XMII_RX_DELAY_MASK 0x3 -+#define QCA956X_PLL_ETH_XMII_TX_DELAY_SHIFT 26 -+#define QCA956X_PLL_ETH_XMII_TX_DELAY_MASK 3 -+ -+#define QCA956X_PLL_ETH_SGMII_SERDES_LOCK_DETECT BIT(2) -+#define QCA956X_PLL_ETH_SGMII_SERDES_PLL_REFCLK BIT(1) -+#define QCA956X_PLL_ETH_SGMII_SERDES_EN_PLL BIT(0) -+ - /* - * USB_CONFIG block - */ -@@ -317,10 +542,19 @@ - #define AR934X_RESET_REG_BOOTSTRAP 0xb0 - #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac - -+#define QCA953X_RESET_REG_RESET_MODULE 0x1c -+#define QCA953X_RESET_REG_BOOTSTRAP 0xb0 -+#define QCA953X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac -+ - #define QCA955X_RESET_REG_RESET_MODULE 0x1c - #define QCA955X_RESET_REG_BOOTSTRAP 0xb0 - #define QCA955X_RESET_REG_EXT_INT_STATUS 0xac - -+#define QCA956X_RESET_REG_RESET_MODULE 0x1c -+#define QCA956X_RESET_REG_BOOTSTRAP 0xb0 -+#define QCA956X_RESET_REG_EXT_INT_STATUS 0xac -+ -+#define MISC_INT_MIPS_SI_TIMERINT_MASK BIT(28) - #define MISC_INT_ETHSW BIT(12) - #define MISC_INT_TIMER4 BIT(10) - #define MISC_INT_TIMER3 BIT(9) -@@ -370,16 +604,123 @@ - #define AR913X_RESET_USB_HOST BIT(5) - #define AR913X_RESET_USB_PHY BIT(4) - -+#define AR933X_RESET_GE1_MDIO BIT(23) -+#define AR933X_RESET_GE0_MDIO BIT(22) -+#define AR933X_RESET_GE1_MAC BIT(13) - #define AR933X_RESET_WMAC BIT(11) -+#define AR933X_RESET_GE0_MAC BIT(9) - #define AR933X_RESET_USB_HOST BIT(5) - #define AR933X_RESET_USB_PHY BIT(4) - #define AR933X_RESET_USBSUS_OVERRIDE BIT(3) - -+#define AR934X_RESET_HOST BIT(31) -+#define AR934X_RESET_SLIC BIT(30) -+#define AR934X_RESET_HDMA BIT(29) -+#define AR934X_RESET_EXTERNAL BIT(28) -+#define AR934X_RESET_RTC BIT(27) -+#define AR934X_RESET_PCIE_EP_INT BIT(26) -+#define AR934X_RESET_CHKSUM_ACC BIT(25) -+#define AR934X_RESET_FULL_CHIP BIT(24) -+#define AR934X_RESET_GE1_MDIO BIT(23) -+#define AR934X_RESET_GE0_MDIO BIT(22) -+#define AR934X_RESET_CPU_NMI BIT(21) -+#define AR934X_RESET_CPU_COLD BIT(20) -+#define AR934X_RESET_HOST_RESET_INT BIT(19) -+#define AR934X_RESET_PCIE_EP BIT(18) -+#define AR934X_RESET_UART1 BIT(17) -+#define AR934X_RESET_DDR BIT(16) -+#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15) -+#define AR934X_RESET_NANDF BIT(14) -+#define AR934X_RESET_GE1_MAC BIT(13) -+#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12) - #define AR934X_RESET_USB_PHY_ANALOG BIT(11) -+#define AR934X_RESET_HOST_DMA_INT BIT(10) -+#define AR934X_RESET_GE0_MAC BIT(9) -+#define AR934X_RESET_ETH_SWITCH BIT(8) -+#define AR934X_RESET_PCIE_PHY BIT(7) -+#define AR934X_RESET_PCIE BIT(6) - #define AR934X_RESET_USB_HOST BIT(5) - #define AR934X_RESET_USB_PHY BIT(4) - #define AR934X_RESET_USBSUS_OVERRIDE BIT(3) -+#define AR934X_RESET_LUT BIT(2) -+#define AR934X_RESET_MBOX BIT(1) -+#define AR934X_RESET_I2S BIT(0) -+ -+#define QCA953X_RESET_USB_EXT_PWR BIT(29) -+#define QCA953X_RESET_EXTERNAL BIT(28) -+#define QCA953X_RESET_RTC BIT(27) -+#define QCA953X_RESET_FULL_CHIP BIT(24) -+#define QCA953X_RESET_GE1_MDIO BIT(23) -+#define QCA953X_RESET_GE0_MDIO BIT(22) -+#define QCA953X_RESET_CPU_NMI BIT(21) -+#define QCA953X_RESET_CPU_COLD BIT(20) -+#define QCA953X_RESET_DDR BIT(16) -+#define QCA953X_RESET_USB_PHY_PLL_PWD_EXT BIT(15) -+#define QCA953X_RESET_GE1_MAC BIT(13) -+#define QCA953X_RESET_ETH_SWITCH_ANALOG BIT(12) -+#define QCA953X_RESET_USB_PHY_ANALOG BIT(11) -+#define QCA953X_RESET_GE0_MAC BIT(9) -+#define QCA953X_RESET_ETH_SWITCH BIT(8) -+#define QCA953X_RESET_PCIE_PHY BIT(7) -+#define QCA953X_RESET_PCIE BIT(6) -+#define QCA953X_RESET_USB_HOST BIT(5) -+#define QCA953X_RESET_USB_PHY BIT(4) -+#define QCA953X_RESET_USBSUS_OVERRIDE BIT(3) -+ -+#define QCA955X_RESET_HOST BIT(31) -+#define QCA955X_RESET_SLIC BIT(30) -+#define QCA955X_RESET_HDMA BIT(29) -+#define QCA955X_RESET_EXTERNAL BIT(28) -+#define QCA955X_RESET_RTC BIT(27) -+#define QCA955X_RESET_PCIE_EP_INT BIT(26) -+#define QCA955X_RESET_CHKSUM_ACC BIT(25) -+#define QCA955X_RESET_FULL_CHIP BIT(24) -+#define QCA955X_RESET_GE1_MDIO BIT(23) -+#define QCA955X_RESET_GE0_MDIO BIT(22) -+#define QCA955X_RESET_CPU_NMI BIT(21) -+#define QCA955X_RESET_CPU_COLD BIT(20) -+#define QCA955X_RESET_HOST_RESET_INT BIT(19) -+#define QCA955X_RESET_PCIE_EP BIT(18) -+#define QCA955X_RESET_UART1 BIT(17) -+#define QCA955X_RESET_DDR BIT(16) -+#define QCA955X_RESET_USB_PHY_PLL_PWD_EXT BIT(15) -+#define QCA955X_RESET_NANDF BIT(14) -+#define QCA955X_RESET_GE1_MAC BIT(13) -+#define QCA955X_RESET_SGMII_ANALOG BIT(12) -+#define QCA955X_RESET_USB_PHY_ANALOG BIT(11) -+#define QCA955X_RESET_HOST_DMA_INT BIT(10) -+#define QCA955X_RESET_GE0_MAC BIT(9) -+#define QCA955X_RESET_SGMII BIT(8) -+#define QCA955X_RESET_PCIE_PHY BIT(7) -+#define QCA955X_RESET_PCIE BIT(6) -+#define QCA955X_RESET_USB_HOST BIT(5) -+#define QCA955X_RESET_USB_PHY BIT(4) -+#define QCA955X_RESET_USBSUS_OVERRIDE BIT(3) -+#define QCA955X_RESET_LUT BIT(2) -+#define QCA955X_RESET_MBOX BIT(1) -+#define QCA955X_RESET_I2S BIT(0) -+ -+#define QCA956X_RESET_EXTERNAL BIT(28) -+#define QCA956X_RESET_FULL_CHIP BIT(24) -+#define QCA956X_RESET_GE1_MDIO BIT(23) -+#define QCA956X_RESET_GE0_MDIO BIT(22) -+#define QCA956X_RESET_CPU_NMI BIT(21) -+#define QCA956X_RESET_CPU_COLD BIT(20) -+#define QCA956X_RESET_DMA BIT(19) -+#define QCA956X_RESET_DDR BIT(16) -+#define QCA956X_RESET_GE1_MAC BIT(13) -+#define QCA956X_RESET_SGMII_ANALOG BIT(12) -+#define QCA956X_RESET_USB_PHY_ANALOG BIT(11) -+#define QCA956X_RESET_GE0_MAC BIT(9) -+#define QCA956X_RESET_SGMII BIT(8) -+#define QCA956X_RESET_USB_HOST BIT(5) -+#define QCA956X_RESET_USB_PHY BIT(4) -+#define QCA956X_RESET_USBSUS_OVERRIDE BIT(3) -+#define QCA956X_RESET_SWITCH_ANALOG BIT(2) -+#define QCA956X_RESET_SWITCH BIT(0) - -+#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18) -+#define AR933X_BOOTSTRAP_EEPBUSY BIT(4) - #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) - - #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23) -@@ -398,8 +739,17 @@ - #define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1) - #define AR934X_BOOTSTRAP_DDR1 BIT(0) - -+#define QCA953X_BOOTSTRAP_SW_OPTION2 BIT(12) -+#define QCA953X_BOOTSTRAP_SW_OPTION1 BIT(11) -+#define QCA953X_BOOTSTRAP_EJTAG_MODE BIT(5) -+#define QCA953X_BOOTSTRAP_REF_CLK_40 BIT(4) -+#define QCA953X_BOOTSTRAP_SDRAM_DISABLED BIT(1) -+#define QCA953X_BOOTSTRAP_DDR1 BIT(0) -+ - #define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4) - -+#define QCA956X_BOOTSTRAP_REF_CLK_40 BIT(2) -+ - #define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0) - #define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1) - #define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2) -@@ -418,6 +768,24 @@ - AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \ - AR934X_PCIE_WMAC_INT_PCIE_RC3) - -+#define QCA953X_PCIE_WMAC_INT_WMAC_MISC BIT(0) -+#define QCA953X_PCIE_WMAC_INT_WMAC_TX BIT(1) -+#define QCA953X_PCIE_WMAC_INT_WMAC_RXLP BIT(2) -+#define QCA953X_PCIE_WMAC_INT_WMAC_RXHP BIT(3) -+#define QCA953X_PCIE_WMAC_INT_PCIE_RC BIT(4) -+#define QCA953X_PCIE_WMAC_INT_PCIE_RC0 BIT(5) -+#define QCA953X_PCIE_WMAC_INT_PCIE_RC1 BIT(6) -+#define QCA953X_PCIE_WMAC_INT_PCIE_RC2 BIT(7) -+#define QCA953X_PCIE_WMAC_INT_PCIE_RC3 BIT(8) -+#define QCA953X_PCIE_WMAC_INT_WMAC_ALL \ -+ (QCA953X_PCIE_WMAC_INT_WMAC_MISC | QCA953X_PCIE_WMAC_INT_WMAC_TX | \ -+ QCA953X_PCIE_WMAC_INT_WMAC_RXLP | QCA953X_PCIE_WMAC_INT_WMAC_RXHP) -+ -+#define QCA953X_PCIE_WMAC_INT_PCIE_ALL \ -+ (QCA953X_PCIE_WMAC_INT_PCIE_RC | QCA953X_PCIE_WMAC_INT_PCIE_RC0 | \ -+ QCA953X_PCIE_WMAC_INT_PCIE_RC1 | QCA953X_PCIE_WMAC_INT_PCIE_RC2 | \ -+ QCA953X_PCIE_WMAC_INT_PCIE_RC3) -+ - #define QCA955X_EXT_INT_WMAC_MISC BIT(0) - #define QCA955X_EXT_INT_WMAC_TX BIT(1) - #define QCA955X_EXT_INT_WMAC_RXLP BIT(2) -@@ -449,6 +817,37 @@ - QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \ - QCA955X_EXT_INT_PCIE_RC2_INT3) - -+#define QCA956X_EXT_INT_WMAC_MISC BIT(0) -+#define QCA956X_EXT_INT_WMAC_TX BIT(1) -+#define QCA956X_EXT_INT_WMAC_RXLP BIT(2) -+#define QCA956X_EXT_INT_WMAC_RXHP BIT(3) -+#define QCA956X_EXT_INT_PCIE_RC1 BIT(4) -+#define QCA956X_EXT_INT_PCIE_RC1_INT0 BIT(5) -+#define QCA956X_EXT_INT_PCIE_RC1_INT1 BIT(6) -+#define QCA956X_EXT_INT_PCIE_RC1_INT2 BIT(7) -+#define QCA956X_EXT_INT_PCIE_RC1_INT3 BIT(8) -+#define QCA956X_EXT_INT_PCIE_RC2 BIT(12) -+#define QCA956X_EXT_INT_PCIE_RC2_INT0 BIT(13) -+#define QCA956X_EXT_INT_PCIE_RC2_INT1 BIT(14) -+#define QCA956X_EXT_INT_PCIE_RC2_INT2 BIT(15) -+#define QCA956X_EXT_INT_PCIE_RC2_INT3 BIT(16) -+#define QCA956X_EXT_INT_USB1 BIT(24) -+#define QCA956X_EXT_INT_USB2 BIT(28) -+ -+#define QCA956X_EXT_INT_WMAC_ALL \ -+ (QCA956X_EXT_INT_WMAC_MISC | QCA956X_EXT_INT_WMAC_TX | \ -+ QCA956X_EXT_INT_WMAC_RXLP | QCA956X_EXT_INT_WMAC_RXHP) -+ -+#define QCA956X_EXT_INT_PCIE_RC1_ALL \ -+ (QCA956X_EXT_INT_PCIE_RC1 | QCA956X_EXT_INT_PCIE_RC1_INT0 | \ -+ QCA956X_EXT_INT_PCIE_RC1_INT1 | QCA956X_EXT_INT_PCIE_RC1_INT2 | \ -+ QCA956X_EXT_INT_PCIE_RC1_INT3) -+ -+#define QCA956X_EXT_INT_PCIE_RC2_ALL \ -+ (QCA956X_EXT_INT_PCIE_RC2 | QCA956X_EXT_INT_PCIE_RC2_INT0 | \ -+ QCA956X_EXT_INT_PCIE_RC2_INT1 | QCA956X_EXT_INT_PCIE_RC2_INT2 | \ -+ QCA956X_EXT_INT_PCIE_RC2_INT3) -+ - #define REV_ID_MAJOR_MASK 0xfff0 - #define REV_ID_MAJOR_AR71XX 0x00a0 - #define REV_ID_MAJOR_AR913X 0x00b0 -@@ -460,8 +859,12 @@ - #define REV_ID_MAJOR_AR9341 0x0120 - #define REV_ID_MAJOR_AR9342 0x1120 - #define REV_ID_MAJOR_AR9344 0x2120 -+#define REV_ID_MAJOR_QCA9533 0x0140 -+#define REV_ID_MAJOR_QCA9533_V2 0x0160 - #define REV_ID_MAJOR_QCA9556 0x0130 - #define REV_ID_MAJOR_QCA9558 0x1130 -+#define REV_ID_MAJOR_TP9343 0x0150 -+#define REV_ID_MAJOR_QCA956X 0x1150 - - #define AR71XX_REV_ID_MINOR_MASK 0x3 - #define AR71XX_REV_ID_MINOR_AR7130 0x0 -@@ -482,8 +885,12 @@ - - #define AR934X_REV_ID_REVISION_MASK 0xf - -+#define QCA953X_REV_ID_REVISION_MASK 0xf -+ - #define QCA955X_REV_ID_REVISION_MASK 0xf - -+#define QCA956X_REV_ID_REVISION_MASK 0xf -+ - /* - * SPI block - */ -@@ -521,15 +928,63 @@ - #define AR71XX_GPIO_REG_INT_ENABLE 0x24 - #define AR71XX_GPIO_REG_FUNC 0x28 - -+#define AR934X_GPIO_REG_OUT_FUNC0 0x2c -+#define AR934X_GPIO_REG_OUT_FUNC1 0x30 -+#define AR934X_GPIO_REG_OUT_FUNC2 0x34 -+#define AR934X_GPIO_REG_OUT_FUNC3 0x38 -+#define AR934X_GPIO_REG_OUT_FUNC4 0x3c -+#define AR934X_GPIO_REG_OUT_FUNC5 0x40 - #define AR934X_GPIO_REG_FUNC 0x6c - -+#define QCA953X_GPIO_REG_OUT_FUNC0 0x2c -+#define QCA953X_GPIO_REG_OUT_FUNC1 0x30 -+#define QCA953X_GPIO_REG_OUT_FUNC2 0x34 -+#define QCA953X_GPIO_REG_OUT_FUNC3 0x38 -+#define QCA953X_GPIO_REG_OUT_FUNC4 0x3c -+#define QCA953X_GPIO_REG_IN_ENABLE0 0x44 -+#define QCA953X_GPIO_REG_FUNC 0x6c -+ -+#define QCA953X_GPIO_OUT_MUX_SPI_CS1 10 -+#define QCA953X_GPIO_OUT_MUX_SPI_CS2 11 -+#define QCA953X_GPIO_OUT_MUX_SPI_CS0 9 -+#define QCA953X_GPIO_OUT_MUX_SPI_CLK 8 -+#define QCA953X_GPIO_OUT_MUX_SPI_MOSI 12 -+#define QCA953X_GPIO_OUT_MUX_LED_LINK1 41 -+#define QCA953X_GPIO_OUT_MUX_LED_LINK2 42 -+#define QCA953X_GPIO_OUT_MUX_LED_LINK3 43 -+#define QCA953X_GPIO_OUT_MUX_LED_LINK4 44 -+#define QCA953X_GPIO_OUT_MUX_LED_LINK5 45 -+ -+#define QCA955X_GPIO_REG_OUT_FUNC0 0x2c -+#define QCA955X_GPIO_REG_OUT_FUNC1 0x30 -+#define QCA955X_GPIO_REG_OUT_FUNC2 0x34 -+#define QCA955X_GPIO_REG_OUT_FUNC3 0x38 -+#define QCA955X_GPIO_REG_OUT_FUNC4 0x3c -+#define QCA955X_GPIO_REG_OUT_FUNC5 0x40 -+#define QCA955X_GPIO_REG_FUNC 0x6c -+ -+#define QCA956X_GPIO_REG_OUT_FUNC0 0x2c -+#define QCA956X_GPIO_REG_OUT_FUNC1 0x30 -+#define QCA956X_GPIO_REG_OUT_FUNC2 0x34 -+#define QCA956X_GPIO_REG_OUT_FUNC3 0x38 -+#define QCA956X_GPIO_REG_OUT_FUNC4 0x3c -+#define QCA956X_GPIO_REG_OUT_FUNC5 0x40 -+#define QCA956X_GPIO_REG_IN_ENABLE0 0x44 -+#define QCA956X_GPIO_REG_IN_ENABLE3 0x50 -+#define QCA956X_GPIO_REG_FUNC 0x6c -+ -+#define QCA956X_GPIO_OUT_MUX_GE0_MDO 32 -+#define QCA956X_GPIO_OUT_MUX_GE0_MDC 33 -+ - #define AR71XX_GPIO_COUNT 16 - #define AR7240_GPIO_COUNT 18 - #define AR7241_GPIO_COUNT 20 - #define AR913X_GPIO_COUNT 22 - #define AR933X_GPIO_COUNT 30 - #define AR934X_GPIO_COUNT 23 -+#define QCA953X_GPIO_COUNT 18 - #define QCA955X_GPIO_COUNT 24 -+#define QCA956X_GPIO_COUNT 23 - - /* - * SRIF block -@@ -552,4 +1007,318 @@ - #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13 - #define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7 - -+#define QCA953X_SRIF_CPU_DPLL1_REG 0x1c0 -+#define QCA953X_SRIF_CPU_DPLL2_REG 0x1c4 -+#define QCA953X_SRIF_CPU_DPLL3_REG 0x1c8 -+ -+#define QCA953X_SRIF_DDR_DPLL1_REG 0x240 -+#define QCA953X_SRIF_DDR_DPLL2_REG 0x244 -+#define QCA953X_SRIF_DDR_DPLL3_REG 0x248 -+ -+#define QCA953X_SRIF_DPLL1_REFDIV_SHIFT 27 -+#define QCA953X_SRIF_DPLL1_REFDIV_MASK 0x1f -+#define QCA953X_SRIF_DPLL1_NINT_SHIFT 18 -+#define QCA953X_SRIF_DPLL1_NINT_MASK 0x1ff -+#define QCA953X_SRIF_DPLL1_NFRAC_MASK 0x0003ffff -+ -+#define QCA953X_SRIF_DPLL2_LOCAL_PLL BIT(30) -+#define QCA953X_SRIF_DPLL2_OUTDIV_SHIFT 13 -+#define QCA953X_SRIF_DPLL2_OUTDIV_MASK 0x7 -+ -+#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17) -+#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16) -+#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13) -+#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12) -+#define AR71XX_GPIO_FUNC_UART_EN BIT(8) -+#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4) -+#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0) -+ -+#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19) -+#define AR724X_GPIO_FUNC_SPI_EN BIT(18) -+#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14) -+#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13) -+#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12) -+#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11) -+#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10) -+#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9) -+#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8) -+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) -+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) -+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) -+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) -+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) -+#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) -+#define AR724X_GPIO_FUNC_UART_EN BIT(1) -+#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0) -+ -+#define AR913X_GPIO_FUNC_WMAC_LED_EN BIT(22) -+#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN BIT(21) -+#define AR913X_GPIO_FUNC_I2S_REFCLKEN BIT(20) -+#define AR913X_GPIO_FUNC_I2S_MCKEN BIT(19) -+#define AR913X_GPIO_FUNC_I2S1_EN BIT(18) -+#define AR913X_GPIO_FUNC_I2S0_EN BIT(17) -+#define AR913X_GPIO_FUNC_SLIC_EN BIT(16) -+#define AR913X_GPIO_FUNC_UART_RTSCTS_EN BIT(9) -+#define AR913X_GPIO_FUNC_UART_EN BIT(8) -+#define AR913X_GPIO_FUNC_USB_CLK_EN BIT(4) -+ -+#define AR933X_GPIO_FUNC_SPDIF2TCK BIT(31) -+#define AR933X_GPIO_FUNC_SPDIF_EN BIT(30) -+#define AR933X_GPIO_FUNC_I2SO_22_18_EN BIT(29) -+#define AR933X_GPIO_FUNC_I2S_MCK_EN BIT(27) -+#define AR933X_GPIO_FUNC_I2SO_EN BIT(26) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL BIT(25) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL BIT(24) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT BIT(23) -+#define AR933X_GPIO_FUNC_SPI_EN BIT(18) -+#define AR933X_GPIO_FUNC_SPI_CS_EN2 BIT(14) -+#define AR933X_GPIO_FUNC_SPI_CS_EN1 BIT(13) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) -+#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) -+#define AR933X_GPIO_FUNC_UART_EN BIT(1) -+#define AR933X_GPIO_FUNC_JTAG_DISABLE BIT(0) -+ -+#define AR934X_GPIO_FUNC_CLK_OBS7_EN BIT(9) -+#define AR934X_GPIO_FUNC_CLK_OBS6_EN BIT(8) -+#define AR934X_GPIO_FUNC_CLK_OBS5_EN BIT(7) -+#define AR934X_GPIO_FUNC_CLK_OBS4_EN BIT(6) -+#define AR934X_GPIO_FUNC_CLK_OBS3_EN BIT(5) -+#define AR934X_GPIO_FUNC_CLK_OBS2_EN BIT(4) -+#define AR934X_GPIO_FUNC_CLK_OBS1_EN BIT(3) -+#define AR934X_GPIO_FUNC_CLK_OBS0_EN BIT(2) -+#define AR934X_GPIO_FUNC_JTAG_DISABLE BIT(1) -+ -+#define AR934X_GPIO_OUT_GPIO 0 -+#define AR934X_GPIO_OUT_SPI_CS1 7 -+#define AR934X_GPIO_OUT_LED_LINK0 41 -+#define AR934X_GPIO_OUT_LED_LINK1 42 -+#define AR934X_GPIO_OUT_LED_LINK2 43 -+#define AR934X_GPIO_OUT_LED_LINK3 44 -+#define AR934X_GPIO_OUT_LED_LINK4 45 -+#define AR934X_GPIO_OUT_EXT_LNA0 46 -+#define AR934X_GPIO_OUT_EXT_LNA1 47 -+ -+#define QCA955X_GPIO_FUNC_CLK_OBS7_EN BIT(9) -+#define QCA955X_GPIO_FUNC_CLK_OBS6_EN BIT(8) -+#define QCA955X_GPIO_FUNC_CLK_OBS5_EN BIT(7) -+#define QCA955X_GPIO_FUNC_CLK_OBS4_EN BIT(6) -+#define QCA955X_GPIO_FUNC_CLK_OBS3_EN BIT(5) -+#define QCA955X_GPIO_FUNC_CLK_OBS2_EN BIT(4) -+#define QCA955X_GPIO_FUNC_CLK_OBS1_EN BIT(3) -+#define QCA955X_GPIO_FUNC_JTAG_DISABLE BIT(1) -+ -+#define QCA955X_GPIO_OUT_GPIO 0 -+#define QCA955X_MII_EXT_MDI 1 -+#define QCA955X_SLIC_DATA_OUT 3 -+#define QCA955X_SLIC_PCM_FS 4 -+#define QCA955X_SLIC_PCM_CLK 5 -+#define QCA955X_SPI_CLK 8 -+#define QCA955X_SPI_CS_0 9 -+#define QCA955X_SPI_CS_1 10 -+#define QCA955X_SPI_CS_2 11 -+#define QCA955X_SPI_MISO 12 -+#define QCA955X_I2S_CLK 13 -+#define QCA955X_I2S_WS 14 -+#define QCA955X_I2S_SD 15 -+#define QCA955X_I2S_MCK 16 -+#define QCA955X_SPDIF_OUT 17 -+#define QCA955X_UART1_TD 18 -+#define QCA955X_UART1_RTS 19 -+#define QCA955X_UART1_RD 20 -+#define QCA955X_UART1_CTS 21 -+#define QCA955X_UART0_SOUT 22 -+#define QCA955X_SPDIF2_OUT 23 -+#define QCA955X_LED_SGMII_SPEED0 24 -+#define QCA955X_LED_SGMII_SPEED1 25 -+#define QCA955X_LED_SGMII_DUPLEX 26 -+#define QCA955X_LED_SGMII_LINK_UP 27 -+#define QCA955X_SGMII_SPEED0_INVERT 28 -+#define QCA955X_SGMII_SPEED1_INVERT 29 -+#define QCA955X_SGMII_DUPLEX_INVERT 30 -+#define QCA955X_SGMII_LINK_UP_INVERT 31 -+#define QCA955X_GE1_MII_MDO 32 -+#define QCA955X_GE1_MII_MDC 33 -+#define QCA955X_SWCOM2 38 -+#define QCA955X_SWCOM3 39 -+#define QCA955X_MAC2_GPIO 40 -+#define QCA955X_MAC3_GPIO 41 -+#define QCA955X_ATT_LED 42 -+#define QCA955X_PWR_LED 43 -+#define QCA955X_TX_FRAME 44 -+#define QCA955X_RX_CLEAR_EXTERNAL 45 -+#define QCA955X_LED_NETWORK_EN 46 -+#define QCA955X_LED_POWER_EN 47 -+#define QCA955X_WMAC_GLUE_WOW 68 -+#define QCA955X_RX_CLEAR_EXTENSION 70 -+#define QCA955X_CP_NAND_CS1 73 -+#define QCA955X_USB_SUSPEND 74 -+#define QCA955X_ETH_TX_ERR 75 -+#define QCA955X_DDR_DQ_OE 76 -+#define QCA955X_CLKREQ_N_EP 77 -+#define QCA955X_CLKREQ_N_RC 78 -+#define QCA955X_CLK_OBS0 79 -+#define QCA955X_CLK_OBS1 80 -+#define QCA955X_CLK_OBS2 81 -+#define QCA955X_CLK_OBS3 82 -+#define QCA955X_CLK_OBS4 83 -+#define QCA955X_CLK_OBS5 84 -+ -+/* -+ * MII_CTRL block -+ */ -+#define AR71XX_MII_REG_MII0_CTRL 0x00 -+#define AR71XX_MII_REG_MII1_CTRL 0x04 -+ -+#define AR71XX_MII_CTRL_IF_MASK 3 -+#define AR71XX_MII_CTRL_SPEED_SHIFT 4 -+#define AR71XX_MII_CTRL_SPEED_MASK 3 -+#define AR71XX_MII_CTRL_SPEED_10 0 -+#define AR71XX_MII_CTRL_SPEED_100 1 -+#define AR71XX_MII_CTRL_SPEED_1000 2 -+ -+#define AR71XX_MII0_CTRL_IF_GMII 0 -+#define AR71XX_MII0_CTRL_IF_MII 1 -+#define AR71XX_MII0_CTRL_IF_RGMII 2 -+#define AR71XX_MII0_CTRL_IF_RMII 3 -+ -+#define AR71XX_MII1_CTRL_IF_RGMII 0 -+#define AR71XX_MII1_CTRL_IF_RMII 1 -+ -+/* -+ * AR933X GMAC interface -+ */ -+#define AR933X_GMAC_REG_ETH_CFG 0x00 -+ -+#define AR933X_ETH_CFG_RGMII_GE0 BIT(0) -+#define AR933X_ETH_CFG_MII_GE0 BIT(1) -+#define AR933X_ETH_CFG_GMII_GE0 BIT(2) -+#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3) -+#define AR933X_ETH_CFG_MII_GE0_SLAVE BIT(4) -+#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5) -+#define AR933X_ETH_CFG_SW_PHY_SWAP BIT(7) -+#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8) -+#define AR933X_ETH_CFG_RMII_GE0 BIT(9) -+#define AR933X_ETH_CFG_RMII_GE0_SPD_10 0 -+#define AR933X_ETH_CFG_RMII_GE0_SPD_100 BIT(10) -+ -+/* -+ * AR934X GMAC Interface -+ */ -+#define AR934X_GMAC_REG_ETH_CFG 0x00 -+ -+#define AR934X_ETH_CFG_RGMII_GMAC0 BIT(0) -+#define AR934X_ETH_CFG_MII_GMAC0 BIT(1) -+#define AR934X_ETH_CFG_GMII_GMAC0 BIT(2) -+#define AR934X_ETH_CFG_MII_GMAC0_MASTER BIT(3) -+#define AR934X_ETH_CFG_MII_GMAC0_SLAVE BIT(4) -+#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN BIT(5) -+#define AR934X_ETH_CFG_SW_ONLY_MODE BIT(6) -+#define AR934X_ETH_CFG_SW_PHY_SWAP BIT(7) -+#define AR934X_ETH_CFG_SW_APB_ACCESS BIT(9) -+#define AR934X_ETH_CFG_RMII_GMAC0 BIT(10) -+#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11) -+#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12) -+#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13) -+#define AR934X_ETH_CFG_RXD_DELAY BIT(14) -+#define AR934X_ETH_CFG_RXD_DELAY_MASK 0x3 -+#define AR934X_ETH_CFG_RXD_DELAY_SHIFT 14 -+#define AR934X_ETH_CFG_RDV_DELAY BIT(16) -+#define AR934X_ETH_CFG_RDV_DELAY_MASK 0x3 -+#define AR934X_ETH_CFG_RDV_DELAY_SHIFT 16 -+ -+/* -+ * QCA953X GMAC Interface -+ */ -+#define QCA953X_GMAC_REG_ETH_CFG 0x00 -+ -+#define QCA953X_ETH_CFG_SW_ONLY_MODE BIT(6) -+#define QCA953X_ETH_CFG_SW_PHY_SWAP BIT(7) -+#define QCA953X_ETH_CFG_SW_APB_ACCESS BIT(9) -+#define QCA953X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13) -+ -+/* -+ * QCA955X GMAC Interface -+ */ -+ -+#define QCA955X_GMAC_REG_ETH_CFG 0x00 -+#define QCA955X_GMAC_REG_SGMII_SERDES 0x18 -+ -+#define QCA955X_ETH_CFG_RGMII_EN BIT(0) -+#define QCA955X_ETH_CFG_MII_GE0 BIT(1) -+#define QCA955X_ETH_CFG_GMII_GE0 BIT(2) -+#define QCA955X_ETH_CFG_MII_GE0_MASTER BIT(3) -+#define QCA955X_ETH_CFG_MII_GE0_SLAVE BIT(4) -+#define QCA955X_ETH_CFG_GE0_ERR_EN BIT(5) -+#define QCA955X_ETH_CFG_GE0_SGMII BIT(6) -+#define QCA955X_ETH_CFG_RMII_GE0 BIT(10) -+#define QCA955X_ETH_CFG_MII_CNTL_SPEED BIT(11) -+#define QCA955X_ETH_CFG_RMII_GE0_MASTER BIT(12) -+#define QCA955X_ETH_CFG_RXD_DELAY_MASK 0x3 -+#define QCA955X_ETH_CFG_RXD_DELAY_SHIFT 14 -+#define QCA955X_ETH_CFG_RDV_DELAY BIT(16) -+#define QCA955X_ETH_CFG_RDV_DELAY_MASK 0x3 -+#define QCA955X_ETH_CFG_RDV_DELAY_SHIFT 16 -+#define QCA955X_ETH_CFG_TXD_DELAY_MASK 0x3 -+#define QCA955X_ETH_CFG_TXD_DELAY_SHIFT 18 -+#define QCA955X_ETH_CFG_TXE_DELAY_MASK 0x3 -+#define QCA955X_ETH_CFG_TXE_DELAY_SHIFT 20 -+ -+#define QCA955X_SGMII_SERDES_LOCK_DETECT_STATUS BIT(15) -+#define QCA955X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23 -+#define QCA955X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf -+/* -+ * QCA956X GMAC Interface -+ */ -+ -+#define QCA956X_GMAC_REG_ETH_CFG 0x00 -+#define QCA956X_GMAC_REG_SGMII_RESET 0x14 -+#define QCA956X_GMAC_REG_SGMII_SERDES 0x18 -+#define QCA956X_GMAC_REG_MR_AN_CONTROL 0x1c -+#define QCA956X_GMAC_REG_SGMII_CONFIG 0x34 -+#define QCA956X_GMAC_REG_SGMII_DEBUG 0x58 -+ -+#define QCA956X_ETH_CFG_RGMII_EN BIT(0) -+#define QCA956X_ETH_CFG_GE0_SGMII BIT(6) -+#define QCA956X_ETH_CFG_SW_ONLY_MODE BIT(7) -+#define QCA956X_ETH_CFG_SW_PHY_SWAP BIT(8) -+#define QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(9) -+#define QCA956X_ETH_CFG_SW_APB_ACCESS BIT(10) -+#define QCA956X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13) -+#define QCA956X_ETH_CFG_RXD_DELAY_MASK 0x3 -+#define QCA956X_ETH_CFG_RXD_DELAY_SHIFT 14 -+#define QCA956X_ETH_CFG_RDV_DELAY_MASK 0x3 -+#define QCA956X_ETH_CFG_RDV_DELAY_SHIFT 16 -+ -+#define QCA956X_SGMII_RESET_RX_CLK_N_RESET 0x0 -+#define QCA956X_SGMII_RESET_RX_CLK_N BIT(0) -+#define QCA956X_SGMII_RESET_TX_CLK_N BIT(1) -+#define QCA956X_SGMII_RESET_RX_125M_N BIT(2) -+#define QCA956X_SGMII_RESET_TX_125M_N BIT(3) -+#define QCA956X_SGMII_RESET_HW_RX_125M_N BIT(4) -+ -+#define QCA956X_SGMII_SERDES_CDR_BW_MASK 0x3 -+#define QCA956X_SGMII_SERDES_CDR_BW_SHIFT 1 -+#define QCA956X_SGMII_SERDES_TX_DR_CTRL_MASK 0x7 -+#define QCA956X_SGMII_SERDES_TX_DR_CTRL_SHIFT 4 -+#define QCA956X_SGMII_SERDES_PLL_BW BIT(8) -+#define QCA956X_SGMII_SERDES_VCO_FAST BIT(9) -+#define QCA956X_SGMII_SERDES_VCO_SLOW BIT(10) -+#define QCA956X_SGMII_SERDES_LOCK_DETECT_STATUS BIT(15) -+#define QCA956X_SGMII_SERDES_EN_SIGNAL_DETECT BIT(16) -+#define QCA956X_SGMII_SERDES_FIBER_SDO BIT(17) -+#define QCA956X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23 -+#define QCA956X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf -+#define QCA956X_SGMII_SERDES_VCO_REG_SHIFT 27 -+#define QCA956X_SGMII_SERDES_VCO_REG_MASK 0xf -+ -+#define QCA956X_MR_AN_CONTROL_AN_ENABLE BIT(12) -+#define QCA956X_MR_AN_CONTROL_PHY_RESET BIT(15) -+ -+#define QCA956X_SGMII_CONFIG_MODE_CTRL_SHIFT 0 -+#define QCA956X_SGMII_CONFIG_MODE_CTRL_MASK 0x7 -+ - #endif /* __ASM_MACH_AR71XX_REGS_H */ diff --git a/target/linux/ath79/patches-4.14/0010-MIPS-ath79-select-the-PINCTRL-subsystem.patch b/target/linux/ath79/patches-4.14/0010-MIPS-ath79-select-the-PINCTRL-subsystem.patch deleted file mode 100644 index cd3f96c..0000000 --- a/target/linux/ath79/patches-4.14/0010-MIPS-ath79-select-the-PINCTRL-subsystem.patch +++ /dev/null @@ -1,20 +0,0 @@ -From f3d5027255ef0752ed12b65c3bf7eb363fc3c096 Mon Sep 17 00:00:00 2001 -From: John Crispin <john@phrozen.org> -Date: Tue, 6 Mar 2018 10:00:55 +0100 -Subject: [PATCH 10/27] MIPS: ath79: select the PINCTRL subsystem - -Signed-off-by: John Crispin <john@phrozen.org> ---- - arch/mips/Kconfig | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -191,6 +191,7 @@ config ATH79 - select CSRC_R4K - select DMA_NONCOHERENT - select GPIOLIB -+ select PINCTRL - select HAVE_CLK - select COMMON_CLK - select CLKDEV_LOOKUP diff --git a/target/linux/ath79/patches-4.14/0011-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch b/target/linux/ath79/patches-4.14/0011-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch deleted file mode 100644 index 85ee24c..0000000 --- a/target/linux/ath79/patches-4.14/0011-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 54204ef3edbb1aa2390cabba61fe185a12cc39f0 Mon Sep 17 00:00:00 2001 -From: Felix Fietkau <nbd@nbd.name> -Date: Tue, 6 Mar 2018 08:35:44 +0100 -Subject: [PATCH 11/27] MIPS: ath79: fix register address in - ath79_ddr_wb_flush() - -ath79_ddr_wb_flush_base has the type void __iomem *, so register offsets -need to be a multiple of 4. - -Cc: Alban Bedel <albeu@free.fr> -Fixes: 24b0e3e84fbf ("MIPS: ath79: Improve the DDR controller interface") -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- - arch/mips/ath79/common.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/mips/ath79/common.c -+++ b/arch/mips/ath79/common.c -@@ -58,7 +58,7 @@ EXPORT_SYMBOL_GPL(ath79_ddr_ctrl_init); - - void ath79_ddr_wb_flush(u32 reg) - { -- void __iomem *flush_reg = ath79_ddr_wb_flush_base + reg; -+ void __iomem *flush_reg = ath79_ddr_wb_flush_base + (reg * 4); - - /* Flush the DDR write buffer. */ - __raw_writel(0x1, flush_reg); diff --git a/target/linux/ath79/patches-4.14/0012-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch b/target/linux/ath79/patches-4.14/0012-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch deleted file mode 100644 index 2b744ee..0000000 --- a/target/linux/ath79/patches-4.14/0012-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch +++ /dev/null @@ -1,42 +0,0 @@ -From ac3a5ee699f3baa7654c93a3ffda46be82443344 Mon Sep 17 00:00:00 2001 -From: Markos Chandras <markos.chandras@imgtec.com> -Date: Wed, 21 Aug 2013 11:47:22 +0100 -Subject: [PATCH 12/27] MIPS: ath79: Avoid using unitialized 'reg' variable - -Fixes the following build error: -arch/mips/include/asm/mach-ath79/ath79.h:139:20: error: 'reg' may be used -uninitialized in this function [-Werror=maybe-uninitialized] -arch/mips/ath79/common.c:62:6: note: 'reg' was declared here -In file included from arch/mips/ath79/common.c:20:0: -arch/mips/ath79/common.c: In function 'ath79_device_reset_clear': -arch/mips/include/asm/mach-ath79/ath79.h:139:20: -error: 'reg' may be used uninitialized in this function -[-Werror=maybe-uninitialized] -arch/mips/ath79/common.c:90:6: note: 'reg' was declared here - -Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> -Acked-by: Gabor Juhos <juhosg@openwrt.org> ---- - arch/mips/ath79/common.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/mips/ath79/common.c -+++ b/arch/mips/ath79/common.c -@@ -106,7 +106,7 @@ void ath79_device_reset_set(u32 mask) - else if (soc_is_qca955x()) - reg = QCA955X_RESET_REG_RESET_MODULE; - else -- BUG(); -+ panic("Reset register not defined for this SOC"); - - spin_lock_irqsave(&ath79_device_reset_lock, flags); - t = ath79_reset_rr(reg); -@@ -134,7 +134,7 @@ void ath79_device_reset_clear(u32 mask) - else if (soc_is_qca955x()) - reg = QCA955X_RESET_REG_RESET_MODULE; - else -- BUG(); -+ panic("Reset register not defined for this SOC"); - - spin_lock_irqsave(&ath79_device_reset_lock, flags); - t = ath79_reset_rr(reg); diff --git a/target/linux/ath79/patches-4.14/0013-MIPS-ath79-fix-system-restart.patch b/target/linux/ath79/patches-4.14/0013-MIPS-ath79-fix-system-restart.patch deleted file mode 100644 index 9696361..0000000 --- a/target/linux/ath79/patches-4.14/0013-MIPS-ath79-fix-system-restart.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 11562939754b8f877562d9a137854022eb521716 Mon Sep 17 00:00:00 2001 -From: Felix Fietkau <nbd@nbd.name> -Date: Mon, 5 Mar 2018 11:33:54 +0100 -Subject: [PATCH 13/27] MIPS: ath79: fix system restart - -Signed-off-by: Felix Fietkau <nbd@nbd.name> -Signed-off-by: John Crispin <john@phrozen.org> ---- - arch/mips/ath79/setup.c | 1 + - arch/mips/include/asm/mach-ath79/ath79.h | 1 + - 2 files changed, 2 insertions(+) - ---- a/arch/mips/ath79/setup.c -+++ b/arch/mips/ath79/setup.c -@@ -40,6 +40,7 @@ static char ath79_sys_type[ATH79_SYS_TYP - - static void ath79_restart(char *command) - { -+ local_irq_disable(); - ath79_device_reset_set(AR71XX_RESET_FULL_CHIP); - for (;;) - if (cpu_wait) ---- a/arch/mips/include/asm/mach-ath79/ath79.h -+++ b/arch/mips/include/asm/mach-ath79/ath79.h -@@ -134,6 +134,7 @@ static inline u32 ath79_pll_rr(unsigned - static inline void ath79_reset_wr(unsigned reg, u32 val) - { - __raw_writel(val, ath79_reset_base + reg); -+ (void) __raw_readl(ath79_reset_base + reg); /* flush */ - } - - static inline u32 ath79_reset_rr(unsigned reg) diff --git a/target/linux/ath79/patches-4.14/0014-MIPS-ath79-finetune-cpu-overrides.patch b/target/linux/ath79/patches-4.14/0014-MIPS-ath79-finetune-cpu-overrides.patch deleted file mode 100644 index e390e58..0000000 --- a/target/linux/ath79/patches-4.14/0014-MIPS-ath79-finetune-cpu-overrides.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 5a8496923bafc4350f51b26964fdc3252a09fd79 Mon Sep 17 00:00:00 2001 -From: Felix Fietkau <nbd@nbd.name> -Date: Mon, 5 Mar 2018 11:35:29 +0100 -Subject: [PATCH 14/27] MIPS: ath79: finetune cpu-overrides - -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- - arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h -+++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h -@@ -36,6 +36,7 @@ - #define cpu_has_mdmx 0 - #define cpu_has_mips3d 0 - #define cpu_has_smartmips 0 -+#define cpu_has_rixi 0 - - #define cpu_has_mips32r1 1 - #define cpu_has_mips32r2 1 -@@ -43,6 +44,7 @@ - #define cpu_has_mips64r2 0 - - #define cpu_has_mipsmt 0 -+#define cpu_has_userlocal 0 - - #define cpu_has_64bits 0 - #define cpu_has_64bit_zero_reg 0 -@@ -51,5 +53,9 @@ - - #define cpu_dcache_line_size() 32 - #define cpu_icache_line_size() 32 -+#define cpu_has_vtag_icache 0 -+#define cpu_has_dc_aliases 1 -+#define cpu_has_ic_fills_f_dc 0 -+#define cpu_has_pindexed_dcache 0 - - #endif /* __ASM_MACH_ATH79_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/ath79/patches-4.14/0015-MIPS-ath79-enable-uart-during-early_prink.patch b/target/linux/ath79/patches-4.14/0015-MIPS-ath79-enable-uart-during-early_prink.patch deleted file mode 100644 index 5826d01..0000000 --- a/target/linux/ath79/patches-4.14/0015-MIPS-ath79-enable-uart-during-early_prink.patch +++ /dev/null @@ -1,71 +0,0 @@ -From b14f8260724abec6c82970085dece6a143d3a0db Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Mon, 5 Mar 2018 11:38:21 +0100 -Subject: [PATCH 15/27] MIPS: ath79: enable uart during early_prink - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> ---- - arch/mips/ath79/early_printk.c | 44 +++++++++++++++++++++++++++++++++++++++++- - 1 file changed, 43 insertions(+), 1 deletion(-) - ---- a/arch/mips/ath79/early_printk.c -+++ b/arch/mips/ath79/early_printk.c -@@ -58,6 +58,46 @@ static void prom_putchar_dummy(unsigned - /* nothing to do */ - } - -+static void prom_enable_uart(u32 id) -+{ -+ void __iomem *gpio_base; -+ u32 uart_en; -+ u32 t; -+ -+ switch (id) { -+ case REV_ID_MAJOR_AR71XX: -+ uart_en = AR71XX_GPIO_FUNC_UART_EN; -+ break; -+ -+ case REV_ID_MAJOR_AR7240: -+ case REV_ID_MAJOR_AR7241: -+ case REV_ID_MAJOR_AR7242: -+ uart_en = AR724X_GPIO_FUNC_UART_EN; -+ break; -+ -+ case REV_ID_MAJOR_AR913X: -+ uart_en = AR913X_GPIO_FUNC_UART_EN; -+ break; -+ -+ case REV_ID_MAJOR_AR9330: -+ case REV_ID_MAJOR_AR9331: -+ uart_en = AR933X_GPIO_FUNC_UART_EN; -+ break; -+ -+ case REV_ID_MAJOR_AR9341: -+ case REV_ID_MAJOR_AR9342: -+ case REV_ID_MAJOR_AR9344: -+ /* TODO */ -+ default: -+ return; -+ } -+ -+ gpio_base = (void __iomem *)(KSEG1ADDR(AR71XX_GPIO_BASE)); -+ t = __raw_readl(gpio_base + AR71XX_GPIO_REG_FUNC); -+ t |= uart_en; -+ __raw_writel(t, gpio_base + AR71XX_GPIO_REG_FUNC); -+} -+ - static void prom_putchar_init(void) - { - void __iomem *base; -@@ -88,8 +128,10 @@ static void prom_putchar_init(void) - - default: - _prom_putchar = prom_putchar_dummy; -- break; -+ return; - } -+ -+ prom_enable_uart(id); - } - - void prom_putchar(unsigned char ch) diff --git a/target/linux/ath79/patches-4.14/0016-MIPS-ath79-add-support-for-QCA953x-SoC.patch b/target/linux/ath79/patches-4.14/0016-MIPS-ath79-add-support-for-QCA953x-SoC.patch deleted file mode 100644 index 0432a23..0000000 --- a/target/linux/ath79/patches-4.14/0016-MIPS-ath79-add-support-for-QCA953x-SoC.patch +++ /dev/null @@ -1,331 +0,0 @@ -From cff23ba486e3c5d17c4d7e446f5eddead855c101 Mon Sep 17 00:00:00 2001 -From: John Crispin <john@phrozen.org> -Date: Tue, 6 Mar 2018 08:45:55 +0100 -Subject: [PATCH 16/27] MIPS: ath79: add support for QCA953x SoC - -Note that the clock calculation looks very similar to the QCA955x, but the -meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed. - -Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> ---- - arch/mips/ath79/Kconfig | 6 ++- - arch/mips/ath79/clock.c | 87 ++++++++++++++++++++++++++++++++ - arch/mips/ath79/common.c | 4 ++ - arch/mips/ath79/dev-common.c | 4 ++ - arch/mips/ath79/early_printk.c | 2 + - arch/mips/ath79/irq.c | 33 +++++++++++- - arch/mips/ath79/setup.c | 21 ++++++-- - arch/mips/include/asm/mach-ath79/ath79.h | 11 ++++ - 8 files changed, 162 insertions(+), 6 deletions(-) - ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -94,6 +94,10 @@ config SOC_AR934X - select PCI_AR724X if PCI - def_bool n - -+config SOC_QCA953X -+ select USB_ARCH_HAS_EHCI -+ def_bool n -+ - config SOC_QCA955X - select HW_HAS_PCI - select PCI_AR724X if PCI -@@ -115,7 +119,7 @@ config ATH79_DEV_USB - def_bool n - - config ATH79_DEV_WMAC -- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X) -+ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X) - def_bool n - - endif ---- a/arch/mips/ath79/clock.c -+++ b/arch/mips/ath79/clock.c -@@ -355,6 +355,91 @@ static void __init ar934x_clocks_init(vo - iounmap(dpll_base); - } - -+static void __init qca953x_clocks_init(void) -+{ -+ unsigned long ref_rate; -+ unsigned long cpu_rate; -+ unsigned long ddr_rate; -+ unsigned long ahb_rate; -+ u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv; -+ u32 cpu_pll, ddr_pll; -+ u32 bootstrap; -+ -+ bootstrap = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP); -+ if (bootstrap & QCA953X_BOOTSTRAP_REF_CLK_40) -+ ref_rate = 40 * 1000 * 1000; -+ else -+ ref_rate = 25 * 1000 * 1000; -+ -+ pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG); -+ out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & -+ QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK; -+ ref_div = (pll >> QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT) & -+ QCA953X_PLL_CPU_CONFIG_REFDIV_MASK; -+ nint = (pll >> QCA953X_PLL_CPU_CONFIG_NINT_SHIFT) & -+ QCA953X_PLL_CPU_CONFIG_NINT_MASK; -+ frac = (pll >> QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT) & -+ QCA953X_PLL_CPU_CONFIG_NFRAC_MASK; -+ -+ cpu_pll = nint * ref_rate / ref_div; -+ cpu_pll += frac * (ref_rate >> 6) / ref_div; -+ cpu_pll /= (1 << out_div); -+ -+ pll = ath79_pll_rr(QCA953X_PLL_DDR_CONFIG_REG); -+ out_div = (pll >> QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT) & -+ QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK; -+ ref_div = (pll >> QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT) & -+ QCA953X_PLL_DDR_CONFIG_REFDIV_MASK; -+ nint = (pll >> QCA953X_PLL_DDR_CONFIG_NINT_SHIFT) & -+ QCA953X_PLL_DDR_CONFIG_NINT_MASK; -+ frac = (pll >> QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT) & -+ QCA953X_PLL_DDR_CONFIG_NFRAC_MASK; -+ -+ ddr_pll = nint * ref_rate / ref_div; -+ ddr_pll += frac * (ref_rate >> 6) / (ref_div << 4); -+ ddr_pll /= (1 << out_div); -+ -+ clk_ctrl = ath79_pll_rr(QCA953X_PLL_CLK_CTRL_REG); -+ -+ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) & -+ QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK; -+ -+ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS) -+ cpu_rate = ref_rate; -+ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL) -+ cpu_rate = cpu_pll / (postdiv + 1); -+ else -+ cpu_rate = ddr_pll / (postdiv + 1); -+ -+ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) & -+ QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK; -+ -+ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS) -+ ddr_rate = ref_rate; -+ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL) -+ ddr_rate = ddr_pll / (postdiv + 1); -+ else -+ ddr_rate = cpu_pll / (postdiv + 1); -+ -+ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) & -+ QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK; -+ -+ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS) -+ ahb_rate = ref_rate; -+ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL) -+ ahb_rate = ddr_pll / (postdiv + 1); -+ else -+ ahb_rate = cpu_pll / (postdiv + 1); -+ -+ ath79_add_sys_clkdev("ref", ref_rate); -+ ath79_add_sys_clkdev("cpu", cpu_rate); -+ ath79_add_sys_clkdev("ddr", ddr_rate); -+ ath79_add_sys_clkdev("ahb", ahb_rate); -+ -+ clk_add_alias("wdt", NULL, "ref", NULL); -+ clk_add_alias("uart", NULL, "ref", NULL); -+} -+ - static void __init qca955x_clocks_init(void) - { - unsigned long ref_rate; -@@ -450,6 +535,8 @@ void __init ath79_clocks_init(void) - ar933x_clocks_init(); - else if (soc_is_ar934x()) - ar934x_clocks_init(); -+ else if (soc_is_qca953x()) -+ qca953x_clocks_init(); - else if (soc_is_qca955x()) - qca955x_clocks_init(); - else ---- a/arch/mips/ath79/common.c -+++ b/arch/mips/ath79/common.c -@@ -103,6 +103,8 @@ void ath79_device_reset_set(u32 mask) - reg = AR933X_RESET_REG_RESET_MODULE; - else if (soc_is_ar934x()) - reg = AR934X_RESET_REG_RESET_MODULE; -+ else if (soc_is_qca953x()) -+ reg = QCA953X_RESET_REG_RESET_MODULE; - else if (soc_is_qca955x()) - reg = QCA955X_RESET_REG_RESET_MODULE; - else -@@ -131,6 +133,8 @@ void ath79_device_reset_clear(u32 mask) - reg = AR933X_RESET_REG_RESET_MODULE; - else if (soc_is_ar934x()) - reg = AR934X_RESET_REG_RESET_MODULE; -+ else if (soc_is_qca953x()) -+ reg = QCA953X_RESET_REG_RESET_MODULE; - else if (soc_is_qca955x()) - reg = QCA955X_RESET_REG_RESET_MODULE; - else ---- a/arch/mips/ath79/dev-common.c -+++ b/arch/mips/ath79/dev-common.c -@@ -85,6 +85,7 @@ void __init ath79_register_uart(void) - soc_is_ar724x() || - soc_is_ar913x() || - soc_is_ar934x() || -+ soc_is_qca953x() || - soc_is_qca955x()) { - ath79_uart_data[0].uartclk = uart_clk_rate; - platform_device_register(&ath79_uart_device); -@@ -148,6 +149,9 @@ void __init ath79_gpio_init(void) - } else if (soc_is_ar934x()) { - ath79_gpio_pdata.ngpios = AR934X_GPIO_COUNT; - ath79_gpio_pdata.oe_inverted = 1; -+ } else if (soc_is_qca953x()) { -+ ath79_gpio_pdata.ngpios = QCA953X_GPIO_COUNT; -+ ath79_gpio_pdata.oe_inverted = 1; - } else if (soc_is_qca955x()) { - ath79_gpio_pdata.ngpios = QCA955X_GPIO_COUNT; - ath79_gpio_pdata.oe_inverted = 1; ---- a/arch/mips/ath79/early_printk.c -+++ b/arch/mips/ath79/early_printk.c -@@ -116,6 +116,8 @@ static void prom_putchar_init(void) - case REV_ID_MAJOR_AR9341: - case REV_ID_MAJOR_AR9342: - case REV_ID_MAJOR_AR9344: -+ case REV_ID_MAJOR_QCA9533: -+ case REV_ID_MAJOR_QCA9533_V2: - case REV_ID_MAJOR_QCA9556: - case REV_ID_MAJOR_QCA9558: - _prom_putchar = prom_putchar_ar71xx; ---- a/arch/mips/ath79/irq.c -+++ b/arch/mips/ath79/irq.c -@@ -56,6 +56,34 @@ static void ar934x_ip2_irq_init(void) - irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch); - } - -+static void qca953x_ip2_irq_dispatch(struct irq_desc *desc) -+{ -+ u32 status; -+ -+ status = ath79_reset_rr(QCA953X_RESET_REG_PCIE_WMAC_INT_STATUS); -+ -+ if (status & QCA953X_PCIE_WMAC_INT_PCIE_ALL) { -+ ath79_ddr_wb_flush(3); -+ generic_handle_irq(ATH79_IP2_IRQ(0)); -+ } else if (status & QCA953X_PCIE_WMAC_INT_WMAC_ALL) { -+ ath79_ddr_wb_flush(4); -+ generic_handle_irq(ATH79_IP2_IRQ(1)); -+ } else { -+ spurious_interrupt(); -+ } -+} -+ -+static void qca953x_irq_init(void) -+{ -+ int i; -+ -+ for (i = ATH79_IP2_IRQ_BASE; -+ i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) -+ irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq); -+ -+ irq_set_chained_handler(ATH79_CPU_IRQ(2), qca953x_ip2_irq_dispatch); -+} -+ - static void qca955x_ip2_irq_dispatch(struct irq_desc *desc) - { - u32 status; -@@ -143,7 +171,7 @@ void __init arch_init_irq(void) - soc_is_ar913x() || soc_is_ar933x()) { - irq_wb_chan2 = 3; - irq_wb_chan3 = 2; -- } else if (soc_is_ar934x()) { -+ } else if (soc_is_ar934x() || soc_is_qca953x()) { - irq_wb_chan3 = 2; - } - -@@ -154,6 +182,7 @@ void __init arch_init_irq(void) - else if (soc_is_ar724x() || - soc_is_ar933x() || - soc_is_ar934x() || -+ soc_is_qca953x() || - soc_is_qca955x()) - misc_is_ar71xx = false; - else -@@ -164,6 +193,8 @@ void __init arch_init_irq(void) - - if (soc_is_ar934x()) - ar934x_ip2_irq_init(); -+ else if (soc_is_qca953x()) -+ qca953x_irq_init(); - else if (soc_is_qca955x()) - qca955x_irq_init(); - } ---- a/arch/mips/ath79/setup.c -+++ b/arch/mips/ath79/setup.c -@@ -60,6 +60,7 @@ static void __init ath79_detect_sys_type - u32 major; - u32 minor; - u32 rev = 0; -+ u32 ver = 1; - - id = ath79_reset_rr(AR71XX_RESET_REG_REV_ID); - major = id & REV_ID_MAJOR_MASK; -@@ -152,6 +153,17 @@ static void __init ath79_detect_sys_type - rev = id & AR934X_REV_ID_REVISION_MASK; - break; - -+ case REV_ID_MAJOR_QCA9533_V2: -+ ver = 2; -+ ath79_soc_rev = 2; -+ /* drop through */ -+ -+ case REV_ID_MAJOR_QCA9533: -+ ath79_soc = ATH79_SOC_QCA9533; -+ chip = "9533"; -+ rev = id & QCA953X_REV_ID_REVISION_MASK; -+ break; -+ - case REV_ID_MAJOR_QCA9556: - ath79_soc = ATH79_SOC_QCA9556; - chip = "9556"; -@@ -168,11 +180,12 @@ static void __init ath79_detect_sys_type - panic("ath79: unknown SoC, id:0x%08x", id); - } - -- ath79_soc_rev = rev; -+ if (ver == 1) -+ ath79_soc_rev = rev; - -- if (soc_is_qca955x()) -- sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s rev %u", -- chip, rev); -+ if (soc_is_qca953x() || soc_is_qca955x()) -+ sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s ver %u rev %u", -+ chip, ver, rev); - else - sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev); - pr_info("SoC: %s\n", ath79_sys_type); ---- a/arch/mips/include/asm/mach-ath79/ath79.h -+++ b/arch/mips/include/asm/mach-ath79/ath79.h -@@ -32,6 +32,7 @@ enum ath79_soc_type { - ATH79_SOC_AR9341, - ATH79_SOC_AR9342, - ATH79_SOC_AR9344, -+ ATH79_SOC_QCA9533, - ATH79_SOC_QCA9556, - ATH79_SOC_QCA9558, - }; -@@ -100,6 +101,16 @@ static inline int soc_is_ar934x(void) - return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344(); - } - -+static inline int soc_is_qca9533(void) -+{ -+ return ath79_soc == ATH79_SOC_QCA9533; -+} -+ -+static inline int soc_is_qca953x(void) -+{ -+ return soc_is_qca9533(); -+} -+ - static inline int soc_is_qca9556(void) - { - return ath79_soc == ATH79_SOC_QCA9556; diff --git a/target/linux/ath79/patches-4.14/0017-MIPS-ath79-add-support-for-qca956x-soc.patch b/target/linux/ath79/patches-4.14/0017-MIPS-ath79-add-support-for-qca956x-soc.patch deleted file mode 100644 index 294fb32..0000000 --- a/target/linux/ath79/patches-4.14/0017-MIPS-ath79-add-support-for-qca956x-soc.patch +++ /dev/null @@ -1,410 +0,0 @@ -From 6aeb24b9508bbe91f89cd4eb21d0d7582d971146 Mon Sep 17 00:00:00 2001 -From: Weijie Gao <hackpascal@gmail.com> -Date: Tue, 6 Mar 2018 08:48:31 +0100 -Subject: [PATCH 17/27] MIPS: ath79: add support for qca956x soc - -This patch adds soc support for QCA9561 and TP9343. -TP9343 is a reduced version of QCA9561, which can be found in TP-LINK routers in China. -The qca956x_wmac has not yet been supported by ath9k. - -tested on TL-WDR6500 and TL-WR882N v1 (Chinese version) - -Signed-off-by: Weijie Gao <hackpascal@gmail.com> ---- - arch/mips/ath79/Kconfig | 2 +- - arch/mips/ath79/clock.c | 96 ++++++++++++++++++++++++++++++++ - arch/mips/ath79/common.c | 4 ++ - arch/mips/ath79/dev-common.c | 7 ++- - arch/mips/ath79/early_printk.c | 2 + - arch/mips/ath79/irq.c | 87 ++++++++++++++++++++++++++++- - arch/mips/ath79/pci.c | 12 ++++ - arch/mips/ath79/setup.c | 17 +++++- - arch/mips/include/asm/mach-ath79/ath79.h | 22 ++++++++ - 9 files changed, 245 insertions(+), 4 deletions(-) - ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -119,7 +119,7 @@ config ATH79_DEV_USB - def_bool n - - config ATH79_DEV_WMAC -- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X) -+ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X || SOC_QCA956X) - def_bool n - - endif ---- a/arch/mips/ath79/clock.c -+++ b/arch/mips/ath79/clock.c -@@ -525,6 +525,100 @@ static void __init qca955x_clocks_init(v - clk_add_alias("uart", NULL, "ref", NULL); - } - -+static void __init qca956x_clocks_init(void) -+{ -+ unsigned long ref_rate; -+ unsigned long cpu_rate; -+ unsigned long ddr_rate; -+ unsigned long ahb_rate; -+ u32 pll, out_div, ref_div, nint, hfrac, lfrac, clk_ctrl, postdiv; -+ u32 cpu_pll, ddr_pll; -+ u32 bootstrap; -+ -+ bootstrap = ath79_reset_rr(QCA956X_RESET_REG_BOOTSTRAP); -+ if (bootstrap & QCA956X_BOOTSTRAP_REF_CLK_40) -+ ref_rate = 40 * 1000 * 1000; -+ else -+ ref_rate = 25 * 1000 * 1000; -+ -+ pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG_REG); -+ out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & -+ QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK; -+ ref_div = (pll >> QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT) & -+ QCA956X_PLL_CPU_CONFIG_REFDIV_MASK; -+ -+ pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG1_REG); -+ nint = (pll >> QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT) & -+ QCA956X_PLL_CPU_CONFIG1_NINT_MASK; -+ hfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT) & -+ QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK; -+ lfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT) & -+ QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK; -+ -+ cpu_pll = nint * ref_rate / ref_div; -+ cpu_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13); -+ cpu_pll += (hfrac >> 13) * ref_rate / ref_div; -+ cpu_pll /= (1 << out_div); -+ -+ pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG_REG); -+ out_div = (pll >> QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT) & -+ QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK; -+ ref_div = (pll >> QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT) & -+ QCA956X_PLL_DDR_CONFIG_REFDIV_MASK; -+ pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG1_REG); -+ nint = (pll >> QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT) & -+ QCA956X_PLL_DDR_CONFIG1_NINT_MASK; -+ hfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT) & -+ QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK; -+ lfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT) & -+ QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK; -+ -+ ddr_pll = nint * ref_rate / ref_div; -+ ddr_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13); -+ ddr_pll += (hfrac >> 13) * ref_rate / ref_div; -+ ddr_pll /= (1 << out_div); -+ -+ clk_ctrl = ath79_pll_rr(QCA956X_PLL_CLK_CTRL_REG); -+ -+ postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) & -+ QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK; -+ -+ if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS) -+ cpu_rate = ref_rate; -+ else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL) -+ cpu_rate = ddr_pll / (postdiv + 1); -+ else -+ cpu_rate = cpu_pll / (postdiv + 1); -+ -+ postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) & -+ QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK; -+ -+ if (clk_ctrl & QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS) -+ ddr_rate = ref_rate; -+ else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL) -+ ddr_rate = cpu_pll / (postdiv + 1); -+ else -+ ddr_rate = ddr_pll / (postdiv + 1); -+ -+ postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) & -+ QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK; -+ -+ if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS) -+ ahb_rate = ref_rate; -+ else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL) -+ ahb_rate = ddr_pll / (postdiv + 1); -+ else -+ ahb_rate = cpu_pll / (postdiv + 1); -+ -+ ath79_add_sys_clkdev("ref", ref_rate); -+ ath79_add_sys_clkdev("cpu", cpu_rate); -+ ath79_add_sys_clkdev("ddr", ddr_rate); -+ ath79_add_sys_clkdev("ahb", ahb_rate); -+ -+ clk_add_alias("wdt", NULL, "ref", NULL); -+ clk_add_alias("uart", NULL, "ref", NULL); -+} -+ - void __init ath79_clocks_init(void) - { - if (soc_is_ar71xx()) -@@ -539,6 +633,8 @@ void __init ath79_clocks_init(void) - qca953x_clocks_init(); - else if (soc_is_qca955x()) - qca955x_clocks_init(); -+ else if (soc_is_qca956x() || soc_is_tp9343()) -+ qca956x_clocks_init(); - else - BUG(); - } ---- a/arch/mips/ath79/common.c -+++ b/arch/mips/ath79/common.c -@@ -107,6 +107,8 @@ void ath79_device_reset_set(u32 mask) - reg = QCA953X_RESET_REG_RESET_MODULE; - else if (soc_is_qca955x()) - reg = QCA955X_RESET_REG_RESET_MODULE; -+ else if (soc_is_qca956x() || soc_is_tp9343()) -+ reg = QCA956X_RESET_REG_RESET_MODULE; - else - panic("Reset register not defined for this SOC"); - -@@ -137,6 +139,8 @@ void ath79_device_reset_clear(u32 mask) - reg = QCA953X_RESET_REG_RESET_MODULE; - else if (soc_is_qca955x()) - reg = QCA955X_RESET_REG_RESET_MODULE; -+ else if (soc_is_qca956x() || soc_is_tp9343()) -+ reg = QCA956X_RESET_REG_RESET_MODULE; - else - panic("Reset register not defined for this SOC"); - ---- a/arch/mips/ath79/dev-common.c -+++ b/arch/mips/ath79/dev-common.c -@@ -86,7 +86,9 @@ void __init ath79_register_uart(void) - soc_is_ar913x() || - soc_is_ar934x() || - soc_is_qca953x() || -- soc_is_qca955x()) { -+ soc_is_qca955x() || -+ soc_is_qca956x() || -+ soc_is_tp9343()) { - ath79_uart_data[0].uartclk = uart_clk_rate; - platform_device_register(&ath79_uart_device); - } else if (soc_is_ar933x()) { -@@ -155,6 +157,9 @@ void __init ath79_gpio_init(void) - } else if (soc_is_qca955x()) { - ath79_gpio_pdata.ngpios = QCA955X_GPIO_COUNT; - ath79_gpio_pdata.oe_inverted = 1; -+ } else if (soc_is_qca956x() || soc_is_tp9343()) { -+ ath79_gpio_pdata.ngpios = QCA956X_GPIO_COUNT; -+ ath79_gpio_pdata.oe_inverted = 1; - } else { - BUG(); - } ---- a/arch/mips/ath79/early_printk.c -+++ b/arch/mips/ath79/early_printk.c -@@ -120,6 +120,8 @@ static void prom_putchar_init(void) - case REV_ID_MAJOR_QCA9533_V2: - case REV_ID_MAJOR_QCA9556: - case REV_ID_MAJOR_QCA9558: -+ case REV_ID_MAJOR_TP9343: -+ case REV_ID_MAJOR_QCA956X: - _prom_putchar = prom_putchar_ar71xx; - break; - ---- a/arch/mips/ath79/irq.c -+++ b/arch/mips/ath79/irq.c -@@ -156,6 +156,87 @@ static void qca955x_irq_init(void) - irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch); - } - -+static void qca956x_ip2_irq_dispatch(struct irq_desc *desc) -+{ -+ u32 status; -+ -+ status = ath79_reset_rr(QCA956X_RESET_REG_EXT_INT_STATUS); -+ status &= QCA956X_EXT_INT_PCIE_RC1_ALL | QCA956X_EXT_INT_WMAC_ALL; -+ -+ if (status == 0) { -+ spurious_interrupt(); -+ return; -+ } -+ -+ if (status & QCA956X_EXT_INT_PCIE_RC1_ALL) { -+ /* TODO: flush DDR? */ -+ generic_handle_irq(ATH79_IP2_IRQ(0)); -+ } -+ -+ if (status & QCA956X_EXT_INT_WMAC_ALL) { -+ /* TODO: flsuh DDR? */ -+ generic_handle_irq(ATH79_IP2_IRQ(1)); -+ } -+} -+ -+static void qca956x_ip3_irq_dispatch(struct irq_desc *desc) -+{ -+ u32 status; -+ -+ status = ath79_reset_rr(QCA956X_RESET_REG_EXT_INT_STATUS); -+ status &= QCA956X_EXT_INT_PCIE_RC2_ALL | -+ QCA956X_EXT_INT_USB1 | QCA956X_EXT_INT_USB2; -+ -+ if (status == 0) { -+ spurious_interrupt(); -+ return; -+ } -+ -+ if (status & QCA956X_EXT_INT_USB1) { -+ /* TODO: flush DDR? */ -+ generic_handle_irq(ATH79_IP3_IRQ(0)); -+ } -+ -+ if (status & QCA956X_EXT_INT_USB2) { -+ /* TODO: flush DDR? */ -+ generic_handle_irq(ATH79_IP3_IRQ(1)); -+ } -+ -+ if (status & QCA956X_EXT_INT_PCIE_RC2_ALL) { -+ /* TODO: flush DDR? */ -+ generic_handle_irq(ATH79_IP3_IRQ(2)); -+ } -+} -+ -+static void qca956x_enable_timer_cb(void) { -+ u32 misc; -+ -+ misc = ath79_reset_rr(AR71XX_RESET_REG_MISC_INT_ENABLE); -+ misc |= MISC_INT_MIPS_SI_TIMERINT_MASK; -+ ath79_reset_wr(AR71XX_RESET_REG_MISC_INT_ENABLE, misc); -+} -+ -+static void qca956x_irq_init(void) -+{ -+ int i; -+ -+ for (i = ATH79_IP2_IRQ_BASE; -+ i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) -+ irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq); -+ -+ irq_set_chained_handler(ATH79_CPU_IRQ(2), qca956x_ip2_irq_dispatch); -+ -+ for (i = ATH79_IP3_IRQ_BASE; -+ i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++) -+ irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq); -+ -+ irq_set_chained_handler(ATH79_CPU_IRQ(3), qca956x_ip3_irq_dispatch); -+ -+ /* QCA956x timer init workaround has to be applied right before setting -+ * up the clock. Else, there will be no jiffies */ -+ late_time_init = &qca956x_enable_timer_cb; -+} -+ - void __init arch_init_irq(void) - { - unsigned irq_wb_chan2 = -1; -@@ -183,7 +264,9 @@ void __init arch_init_irq(void) - soc_is_ar933x() || - soc_is_ar934x() || - soc_is_qca953x() || -- soc_is_qca955x()) -+ soc_is_qca955x() || -+ soc_is_qca956x() || -+ soc_is_tp9343()) - misc_is_ar71xx = false; - else - BUG(); -@@ -197,4 +280,6 @@ void __init arch_init_irq(void) - qca953x_irq_init(); - else if (soc_is_qca955x()) - qca955x_irq_init(); -+ else if (soc_is_qca956x() || soc_is_tp9343()) -+ qca956x_irq_init(); - } ---- a/arch/mips/ath79/pci.c -+++ b/arch/mips/ath79/pci.c -@@ -82,6 +82,9 @@ int pcibios_map_irq(const struct pci_dev - } else if (soc_is_qca955x()) { - ath79_pci_irq_map = qca955x_pci_irq_map; - ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map); -+ } else if (soc_is_qca956x()) { -+ ath79_pci_irq_map = qca956x_pci_irq_map; -+ ath79_pci_nr_irqs = ARRAY_SIZE(qca956x_pci_irq_map); - } else { - pr_crit("pci %s: invalid irq map\n", - pci_name((struct pci_dev *) dev)); -@@ -261,6 +264,15 @@ int __init ath79_register_pci(void) - QCA955X_PCI_MEM_SIZE, - 1, - ATH79_IP3_IRQ(2)); -+ } else if (soc_is_qca956x()) { -+ pdev = ath79_register_pci_ar724x(0, -+ QCA956X_PCI_CFG_BASE1, -+ QCA956X_PCI_CTRL_BASE1, -+ QCA956X_PCI_CRP_BASE1, -+ QCA956X_PCI_MEM_BASE1, -+ QCA956X_PCI_MEM_SIZE, -+ 1, -+ ATH79_IP3_IRQ(2)); - } else { - /* No PCI support */ - return -ENODEV; ---- a/arch/mips/ath79/setup.c -+++ b/arch/mips/ath79/setup.c -@@ -176,6 +176,18 @@ static void __init ath79_detect_sys_type - rev = id & QCA955X_REV_ID_REVISION_MASK; - break; - -+ case REV_ID_MAJOR_QCA956X: -+ ath79_soc = ATH79_SOC_QCA956X; -+ chip = "956X"; -+ rev = id & QCA956X_REV_ID_REVISION_MASK; -+ break; -+ -+ case REV_ID_MAJOR_TP9343: -+ ath79_soc = ATH79_SOC_TP9343; -+ chip = "9343"; -+ rev = id & QCA956X_REV_ID_REVISION_MASK; -+ break; -+ - default: - panic("ath79: unknown SoC, id:0x%08x", id); - } -@@ -183,9 +195,12 @@ static void __init ath79_detect_sys_type - if (ver == 1) - ath79_soc_rev = rev; - -- if (soc_is_qca953x() || soc_is_qca955x()) -+ if (soc_is_qca953x() || soc_is_qca955x() || soc_is_qca956x()) - sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s ver %u rev %u", - chip, ver, rev); -+ else if (soc_is_tp9343()) -+ sprintf(ath79_sys_type, "Qualcomm Atheros TP%s rev %u", -+ chip, rev); - else - sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev); - pr_info("SoC: %s\n", ath79_sys_type); ---- a/arch/mips/include/asm/mach-ath79/ath79.h -+++ b/arch/mips/include/asm/mach-ath79/ath79.h -@@ -35,6 +35,8 @@ enum ath79_soc_type { - ATH79_SOC_QCA9533, - ATH79_SOC_QCA9556, - ATH79_SOC_QCA9558, -+ ATH79_SOC_TP9343, -+ ATH79_SOC_QCA956X, - }; - - extern enum ath79_soc_type ath79_soc; -@@ -126,6 +128,26 @@ static inline int soc_is_qca955x(void) - return soc_is_qca9556() || soc_is_qca9558(); - } - -+static inline int soc_is_tp9343(void) -+{ -+ return ath79_soc == ATH79_SOC_TP9343; -+} -+ -+static inline int soc_is_qca9561(void) -+{ -+ return ath79_soc == ATH79_SOC_QCA956X; -+} -+ -+static inline int soc_is_qca9563(void) -+{ -+ return ath79_soc == ATH79_SOC_QCA956X; -+} -+ -+static inline int soc_is_qca956x(void) -+{ -+ return soc_is_qca9561() || soc_is_qca9563(); -+} -+ - void ath79_ddr_wb_flush(unsigned int reg); - void ath79_ddr_set_pci_windows(void); - diff --git a/target/linux/ath79/patches-4.14/0019-MIPS-ath79-get-PCIe-controller-out-of-reset.patch b/target/linux/ath79/patches-4.14/0019-MIPS-ath79-get-PCIe-controller-out-of-reset.patch deleted file mode 100644 index f435e9b..0000000 --- a/target/linux/ath79/patches-4.14/0019-MIPS-ath79-get-PCIe-controller-out-of-reset.patch +++ /dev/null @@ -1,100 +0,0 @@ -From 308c2ef9c4f1be2e1cee699042671eb973b51803 Mon Sep 17 00:00:00 2001 -From: Mathias Kresin <dev@kresin.me> -Date: Tue, 6 Mar 2018 08:37:43 +0100 -Subject: [PATCH 19/27] MIPS: ath79: get PCIe controller out of reset - -The ar724x pci driver expects the PCIe controller to be brought out of -reset by the bootloader. - -At least the AVM Fritz 300E bootloader doesn't take care of releasing -the different PCIe controller related resets which causes an endless -hang as soon as either the PCIE Reset register (0x180f0018) or the PCI -Application Control register (0x180f0000) is read from. - -Do the full "PCIE Root Complex Initialization Sequence" if the PCIe -host controller is still in reset during probing. - -The QCA u-boot sleeps 10ms after the PCIE Application Control bit is -set to ready. It has been shown that 10ms might not be enough time if -PCIe should be used right after setting the bit. During my tests it -took up to 20ms till the link was up. Giving the link up to 100ms -should work for all cases. - -Signed-off-by: Mathias Kresin <dev@kresin.me> ---- - arch/mips/pci/pci-ar724x.c | 42 ++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 42 insertions(+) - ---- a/arch/mips/pci/pci-ar724x.c -+++ b/arch/mips/pci/pci-ar724x.c -@@ -12,14 +12,18 @@ - #include <linux/irq.h> - #include <linux/pci.h> - #include <linux/init.h> -+#include <linux/delay.h> - #include <linux/platform_device.h> - #include <asm/mach-ath79/ath79.h> - #include <asm/mach-ath79/ar71xx_regs.h> - -+#define AR724X_PCI_REG_APP 0x00 - #define AR724X_PCI_REG_RESET 0x18 - #define AR724X_PCI_REG_INT_STATUS 0x4c - #define AR724X_PCI_REG_INT_MASK 0x50 - -+#define AR724X_PCI_APP_LTSSM_ENABLE BIT(0) -+ - #define AR724X_PCI_RESET_LINK_UP BIT(0) - - #define AR724X_PCI_INT_DEV0 BIT(14) -@@ -325,6 +329,37 @@ static void ar724x_pci_irq_init(struct a - apc); - } - -+static void ar724x_pci_hw_init(struct ar724x_pci_controller *apc) -+{ -+ u32 ppl, app; -+ int wait = 0; -+ -+ /* deassert PCIe host controller and PCIe PHY reset */ -+ ath79_device_reset_clear(AR724X_RESET_PCIE); -+ ath79_device_reset_clear(AR724X_RESET_PCIE_PHY); -+ -+ /* remove the reset of the PCIE PLL */ -+ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG); -+ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET; -+ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl); -+ -+ /* deassert bypass for the PCIE PLL */ -+ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG); -+ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS; -+ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl); -+ -+ /* set PCIE Application Control to ready */ -+ app = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_APP); -+ app |= AR724X_PCI_APP_LTSSM_ENABLE; -+ __raw_writel(app, apc->ctrl_base + AR724X_PCI_REG_APP); -+ -+ /* wait up to 100ms for PHY link up */ -+ do { -+ mdelay(10); -+ wait++; -+ } while (wait < 10 && !ar724x_pci_check_link(apc)); -+} -+ - static int ar724x_pci_probe(struct platform_device *pdev) - { - struct ar724x_pci_controller *apc; -@@ -383,6 +418,13 @@ static int ar724x_pci_probe(struct platf - apc->pci_controller.io_resource = &apc->io_res; - apc->pci_controller.mem_resource = &apc->mem_res; - -+ /* -+ * Do the full PCIE Root Complex Initialization Sequence if the PCIe -+ * host controller is in reset. -+ */ -+ if (ath79_reset_rr(AR724X_RESET_REG_RESET_MODULE) & AR724X_RESET_PCIE) -+ ar724x_pci_hw_init(apc); -+ - apc->link_up = ar724x_pci_check_link(apc); - if (!apc->link_up) - dev_warn(&pdev->dev, "PCIe link is down\n"); diff --git a/target/linux/ath79/patches-4.14/0020-MIPS-ath79-turn-pci-ar71xx-driver-into-a-pure-OF-dri.patch b/target/linux/ath79/patches-4.14/0020-MIPS-ath79-turn-pci-ar71xx-driver-into-a-pure-OF-dri.patch deleted file mode 100644 index 2d9ddf4..0000000 --- a/target/linux/ath79/patches-4.14/0020-MIPS-ath79-turn-pci-ar71xx-driver-into-a-pure-OF-dri.patch +++ /dev/null @@ -1,197 +0,0 @@ -From cc5a306038b7956b5736a70696dddaaf3792df76 Mon Sep 17 00:00:00 2001 -From: John Crispin <john@phrozen.org> -Date: Tue, 6 Mar 2018 09:22:49 +0100 -Subject: [PATCH 20/27] MIPS: ath79: turn pci-ar71xx driver into a pure OF - driver - -Signed-off-by: John Crispin <john@phrozen.org> ---- - arch/mips/pci/pci-ar71xx.c | 81 +++++++++++++++++++++++----------------------- - 1 file changed, 40 insertions(+), 41 deletions(-) - ---- a/arch/mips/pci/pci-ar71xx.c -+++ b/arch/mips/pci/pci-ar71xx.c -@@ -18,8 +18,11 @@ - #include <linux/pci.h> - #include <linux/pci_regs.h> - #include <linux/interrupt.h> -+#include <linux/irqchip/chained_irq.h> - #include <linux/init.h> - #include <linux/platform_device.h> -+#include <linux/of_irq.h> -+#include <linux/of_pci.h> - - #include <asm/mach-ath79/ar71xx_regs.h> - #include <asm/mach-ath79/ath79.h> -@@ -49,12 +52,13 @@ - #define AR71XX_PCI_IRQ_COUNT 5 - - struct ar71xx_pci_controller { -+ struct device_node *np; - void __iomem *cfg_base; - int irq; -- int irq_base; - struct pci_controller pci_ctrl; - struct resource io_res; - struct resource mem_res; -+ struct irq_domain *domain; - }; - - /* Byte lane enable bits */ -@@ -228,29 +232,30 @@ static struct pci_ops ar71xx_pci_ops = { - - static void ar71xx_pci_irq_handler(struct irq_desc *desc) - { -- struct ar71xx_pci_controller *apc; - void __iomem *base = ath79_reset_base; -+ struct irq_chip *chip = irq_desc_get_chip(desc); -+ struct ar71xx_pci_controller *apc = irq_desc_get_handler_data(desc); - u32 pending; - -- apc = irq_desc_get_handler_data(desc); -- -+ chained_irq_enter(chip, desc); - pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) & - __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); - - if (pending & AR71XX_PCI_INT_DEV0) -- generic_handle_irq(apc->irq_base + 0); -+ generic_handle_irq(irq_linear_revmap(apc->domain, 1)); - - else if (pending & AR71XX_PCI_INT_DEV1) -- generic_handle_irq(apc->irq_base + 1); -+ generic_handle_irq(irq_linear_revmap(apc->domain, 2)); - - else if (pending & AR71XX_PCI_INT_DEV2) -- generic_handle_irq(apc->irq_base + 2); -+ generic_handle_irq(irq_linear_revmap(apc->domain, 3)); - - else if (pending & AR71XX_PCI_INT_CORE) -- generic_handle_irq(apc->irq_base + 4); -+ generic_handle_irq(irq_linear_revmap(apc->domain, 4)); - - else - spurious_interrupt(); -+ chained_irq_exit(chip, desc); - } - - static void ar71xx_pci_irq_unmask(struct irq_data *d) -@@ -261,7 +266,7 @@ static void ar71xx_pci_irq_unmask(struct - u32 t; - - apc = irq_data_get_irq_chip_data(d); -- irq = d->irq - apc->irq_base; -+ irq = irq_linear_revmap(apc->domain, d->irq); - - t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); - __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE); -@@ -278,7 +283,7 @@ static void ar71xx_pci_irq_mask(struct i - u32 t; - - apc = irq_data_get_irq_chip_data(d); -- irq = d->irq - apc->irq_base; -+ irq = irq_linear_revmap(apc->domain, d->irq); - - t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); - __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE); -@@ -294,24 +299,30 @@ static struct irq_chip ar71xx_pci_irq_ch - .irq_mask_ack = ar71xx_pci_irq_mask, - }; - -+static int ar71xx_pci_irq_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) -+{ -+ struct ar71xx_pci_controller *apc = d->host_data; -+ -+ irq_set_chip_and_handler(irq, &ar71xx_pci_irq_chip, handle_level_irq); -+ irq_set_chip_data(irq, apc); -+ -+ return 0; -+} -+ -+static const struct irq_domain_ops ar71xx_pci_domain_ops = { -+ .xlate = irq_domain_xlate_onecell, -+ .map = ar71xx_pci_irq_map, -+}; -+ - static void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc) - { - void __iomem *base = ath79_reset_base; -- int i; - - __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE); - __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS); - -- BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR71XX_PCI_IRQ_COUNT); -- -- apc->irq_base = ATH79_PCI_IRQ_BASE; -- for (i = apc->irq_base; -- i < apc->irq_base + AR71XX_PCI_IRQ_COUNT; i++) { -- irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip, -- handle_level_irq); -- irq_set_chip_data(i, apc); -- } -- -+ apc->domain = irq_domain_add_linear(apc->np, AR71XX_PCI_IRQ_COUNT, -+ &ar71xx_pci_domain_ops, apc); - irq_set_chained_handler_and_data(apc->irq, ar71xx_pci_irq_handler, - apc); - } -@@ -328,6 +339,11 @@ static void ar71xx_pci_reset(void) - mdelay(100); - } - -+static const struct of_device_id ar71xx_pci_ids[] = { -+ { .compatible = "qca,ar7100-pci" }, -+ {}, -+}; -+ - static int ar71xx_pci_probe(struct platform_device *pdev) - { - struct ar71xx_pci_controller *apc; -@@ -348,26 +364,6 @@ static int ar71xx_pci_probe(struct platf - if (apc->irq < 0) - return -EINVAL; - -- res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base"); -- if (!res) -- return -EINVAL; -- -- apc->io_res.parent = res; -- apc->io_res.name = "PCI IO space"; -- apc->io_res.start = res->start; -- apc->io_res.end = res->end; -- apc->io_res.flags = IORESOURCE_IO; -- -- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base"); -- if (!res) -- return -EINVAL; -- -- apc->mem_res.parent = res; -- apc->mem_res.name = "PCI memory space"; -- apc->mem_res.start = res->start; -- apc->mem_res.end = res->end; -- apc->mem_res.flags = IORESOURCE_MEM; -- - ar71xx_pci_reset(); - - /* setup COMMAND register */ -@@ -380,9 +376,11 @@ static int ar71xx_pci_probe(struct platf - - ar71xx_pci_irq_init(apc); - -+ apc->np = pdev->dev.of_node; - apc->pci_ctrl.pci_ops = &ar71xx_pci_ops; - apc->pci_ctrl.mem_resource = &apc->mem_res; - apc->pci_ctrl.io_resource = &apc->io_res; -+ pci_load_of_ranges(&apc->pci_ctrl, pdev->dev.of_node); - - register_pci_controller(&apc->pci_ctrl); - -@@ -393,6 +391,7 @@ static struct platform_driver ar71xx_pci - .probe = ar71xx_pci_probe, - .driver = { - .name = "ar71xx-pci", -+ .of_match_table = of_match_ptr(ar71xx_pci_ids), - }, - }; - diff --git a/target/linux/ath79/patches-4.14/0021-MIPS-ath79-turn-pci-ar724x-driver-into-a-pure-OF-dri.patch b/target/linux/ath79/patches-4.14/0021-MIPS-ath79-turn-pci-ar724x-driver-into-a-pure-OF-dri.patch deleted file mode 100644 index d5ebeb8..0000000 --- a/target/linux/ath79/patches-4.14/0021-MIPS-ath79-turn-pci-ar724x-driver-into-a-pure-OF-dri.patch +++ /dev/null @@ -1,199 +0,0 @@ -From 0e7f36bfd68401e8c42933e7f770f270497bb9a8 Mon Sep 17 00:00:00 2001 -From: John Crispin <john@phrozen.org> -Date: Tue, 6 Mar 2018 09:23:25 +0100 -Subject: [PATCH 21/27] MIPS: ath79: turn pci-ar724x driver into a pure OF - driver - -Signed-off-by: John Crispin <john@phrozen.org> ---- - arch/mips/pci/pci-ar724x.c | 86 +++++++++++++++++++++------------------------- - 1 file changed, 40 insertions(+), 46 deletions(-) - ---- a/arch/mips/pci/pci-ar724x.c -+++ b/arch/mips/pci/pci-ar724x.c -@@ -14,8 +14,11 @@ - #include <linux/init.h> - #include <linux/delay.h> - #include <linux/platform_device.h> -+#include <linux/irqchip/chained_irq.h> - #include <asm/mach-ath79/ath79.h> - #include <asm/mach-ath79/ar71xx_regs.h> -+#include <linux/of_irq.h> -+#include <linux/of_pci.h> - - #define AR724X_PCI_REG_APP 0x00 - #define AR724X_PCI_REG_RESET 0x18 -@@ -45,17 +48,20 @@ struct ar724x_pci_controller { - void __iomem *crp_base; - - int irq; -- int irq_base; - - bool link_up; - bool bar0_is_cached; - u32 bar0_value; - -+ struct device_node *np; - struct pci_controller pci_controller; -+ struct irq_domain *domain; - struct resource io_res; - struct resource mem_res; - }; - -+static struct irq_chip ar724x_pci_irq_chip; -+ - static inline bool ar724x_pci_check_link(struct ar724x_pci_controller *apc) - { - u32 reset; -@@ -231,35 +237,31 @@ static struct pci_ops ar724x_pci_ops = { - - static void ar724x_pci_irq_handler(struct irq_desc *desc) - { -- struct ar724x_pci_controller *apc; -- void __iomem *base; -+ struct irq_chip *chip = irq_desc_get_chip(desc); -+ struct ar724x_pci_controller *apc = irq_desc_get_handler_data(desc); - u32 pending; - -- apc = irq_desc_get_handler_data(desc); -- base = apc->ctrl_base; -- -- pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) & -- __raw_readl(base + AR724X_PCI_REG_INT_MASK); -+ chained_irq_enter(chip, desc); -+ pending = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_INT_STATUS) & -+ __raw_readl(apc->ctrl_base + AR724X_PCI_REG_INT_MASK); - - if (pending & AR724X_PCI_INT_DEV0) -- generic_handle_irq(apc->irq_base + 0); -- -+ generic_handle_irq(irq_linear_revmap(apc->domain, 1)); - else - spurious_interrupt(); -+ chained_irq_exit(chip, desc); - } - - static void ar724x_pci_irq_unmask(struct irq_data *d) - { - struct ar724x_pci_controller *apc; - void __iomem *base; -- int offset; - u32 t; - - apc = irq_data_get_irq_chip_data(d); - base = apc->ctrl_base; -- offset = apc->irq_base - d->irq; - -- switch (offset) { -+ switch (irq_linear_revmap(apc->domain, d->irq)) { - case 0: - t = __raw_readl(base + AR724X_PCI_REG_INT_MASK); - __raw_writel(t | AR724X_PCI_INT_DEV0, -@@ -273,14 +275,12 @@ static void ar724x_pci_irq_mask(struct i - { - struct ar724x_pci_controller *apc; - void __iomem *base; -- int offset; - u32 t; - - apc = irq_data_get_irq_chip_data(d); - base = apc->ctrl_base; -- offset = apc->irq_base - d->irq; - -- switch (offset) { -+ switch (irq_linear_revmap(apc->domain, d->irq)) { - case 0: - t = __raw_readl(base + AR724X_PCI_REG_INT_MASK); - __raw_writel(t & ~AR724X_PCI_INT_DEV0, -@@ -305,26 +305,32 @@ static struct irq_chip ar724x_pci_irq_ch - .irq_mask_ack = ar724x_pci_irq_mask, - }; - -+static int ar724x_pci_irq_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) -+{ -+ struct ar724x_pci_controller *apc = d->host_data; -+ -+ irq_set_chip_and_handler(irq, &ar724x_pci_irq_chip, handle_level_irq); -+ irq_set_chip_data(irq, apc); -+ -+ return 0; -+} -+ -+static const struct irq_domain_ops ar724x_pci_domain_ops = { -+ .xlate = irq_domain_xlate_onecell, -+ .map = ar724x_pci_irq_map, -+}; -+ - static void ar724x_pci_irq_init(struct ar724x_pci_controller *apc, - int id) - { - void __iomem *base; -- int i; - - base = apc->ctrl_base; - - __raw_writel(0, base + AR724X_PCI_REG_INT_MASK); - __raw_writel(0, base + AR724X_PCI_REG_INT_STATUS); - -- apc->irq_base = ATH79_PCI_IRQ_BASE + (id * AR724X_PCI_IRQ_COUNT); -- -- for (i = apc->irq_base; -- i < apc->irq_base + AR724X_PCI_IRQ_COUNT; i++) { -- irq_set_chip_and_handler(i, &ar724x_pci_irq_chip, -- handle_level_irq); -- irq_set_chip_data(i, apc); -- } -- -+ apc->domain = irq_domain_add_linear(apc->np, 2, &ar724x_pci_domain_ops, apc); - irq_set_chained_handler_and_data(apc->irq, ar724x_pci_irq_handler, - apc); - } -@@ -394,29 +400,11 @@ static int ar724x_pci_probe(struct platf - if (apc->irq < 0) - return -EINVAL; - -- res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base"); -- if (!res) -- return -EINVAL; -- -- apc->io_res.parent = res; -- apc->io_res.name = "PCI IO space"; -- apc->io_res.start = res->start; -- apc->io_res.end = res->end; -- apc->io_res.flags = IORESOURCE_IO; -- -- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base"); -- if (!res) -- return -EINVAL; -- -- apc->mem_res.parent = res; -- apc->mem_res.name = "PCI memory space"; -- apc->mem_res.start = res->start; -- apc->mem_res.end = res->end; -- apc->mem_res.flags = IORESOURCE_MEM; -- -+ apc->np = pdev->dev.of_node; - apc->pci_controller.pci_ops = &ar724x_pci_ops; - apc->pci_controller.io_resource = &apc->io_res; - apc->pci_controller.mem_resource = &apc->mem_res; -+ pci_load_of_ranges(&apc->pci_controller, pdev->dev.of_node); - - /* - * Do the full PCIE Root Complex Initialization Sequence if the PCIe -@@ -438,10 +426,16 @@ static int ar724x_pci_probe(struct platf - return 0; - } - -+static const struct of_device_id ar724x_pci_ids[] = { -+ { .compatible = "qcom,ar7240-pci" }, -+ {}, -+}; -+ - static struct platform_driver ar724x_pci_driver = { - .probe = ar724x_pci_probe, - .driver = { - .name = "ar724x-pci", -+ .of_match_table = of_match_ptr(ar724x_pci_ids), - }, - }; - diff --git a/target/linux/ath79/patches-4.14/0022-MIPS-ath79-drop-pci.c.patch b/target/linux/ath79/patches-4.14/0022-MIPS-ath79-drop-pci.c.patch deleted file mode 100644 index 58ed122..0000000 --- a/target/linux/ath79/patches-4.14/0022-MIPS-ath79-drop-pci.c.patch +++ /dev/null @@ -1,350 +0,0 @@ -From f4128f3224df2309262ef8d1275d928717ebefd0 Mon Sep 17 00:00:00 2001 -From: John Crispin <john@phrozen.org> -Date: Tue, 6 Mar 2018 09:21:46 +0100 -Subject: [PATCH 22/27] MIPS: ath79: drop pci.c - -This patch drops pci.c fromt he ath79 folder and moves the the pcibios -callbacks to a new fixup file. - -Signed-off-by: John Crispin <john@phrozen.org> ---- - arch/mips/ath79/Makefile | 1 - - arch/mips/ath79/pci.c | 285 -------------------------------------------- - arch/mips/pci/Makefile | 1 + - arch/mips/pci/fixup-ath79.c | 21 ++++ - 4 files changed, 22 insertions(+), 286 deletions(-) - delete mode 100644 arch/mips/ath79/pci.c - create mode 100644 arch/mips/pci/fixup-ath79.c - ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -11,7 +11,6 @@ - obj-y := prom.o setup.o irq.o common.o clock.o - - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o --obj-$(CONFIG_PCI) += pci.o - - # - # Devices ---- a/arch/mips/ath79/pci.c -+++ /dev/null -@@ -1,285 +0,0 @@ --/* -- * Atheros AR71XX/AR724X specific PCI setup code -- * -- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com> -- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> -- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -- * -- * Parts of this file are based on Atheros' 2.6.15 BSP -- * -- * This program is free software; you can redistribute it and/or modify it -- * under the terms of the GNU General Public License version 2 as published -- * by the Free Software Foundation. -- */ -- --#include <linux/init.h> --#include <linux/pci.h> --#include <linux/resource.h> --#include <linux/platform_device.h> --#include <asm/mach-ath79/ar71xx_regs.h> --#include <asm/mach-ath79/ath79.h> --#include <asm/mach-ath79/irq.h> --#include "pci.h" -- --static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev); --static const struct ath79_pci_irq *ath79_pci_irq_map; --static unsigned ath79_pci_nr_irqs; -- --static const struct ath79_pci_irq ar71xx_pci_irq_map[] = { -- { -- .slot = 17, -- .pin = 1, -- .irq = ATH79_PCI_IRQ(0), -- }, { -- .slot = 18, -- .pin = 1, -- .irq = ATH79_PCI_IRQ(1), -- }, { -- .slot = 19, -- .pin = 1, -- .irq = ATH79_PCI_IRQ(2), -- } --}; -- --static const struct ath79_pci_irq ar724x_pci_irq_map[] = { -- { -- .slot = 0, -- .pin = 1, -- .irq = ATH79_PCI_IRQ(0), -- } --}; -- --static const struct ath79_pci_irq qca955x_pci_irq_map[] = { -- { -- .bus = 0, -- .slot = 0, -- .pin = 1, -- .irq = ATH79_PCI_IRQ(0), -- }, -- { -- .bus = 1, -- .slot = 0, -- .pin = 1, -- .irq = ATH79_PCI_IRQ(1), -- }, --}; -- --int pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin) --{ -- int irq = -1; -- int i; -- -- if (ath79_pci_nr_irqs == 0 || -- ath79_pci_irq_map == NULL) { -- if (soc_is_ar71xx()) { -- ath79_pci_irq_map = ar71xx_pci_irq_map; -- ath79_pci_nr_irqs = ARRAY_SIZE(ar71xx_pci_irq_map); -- } else if (soc_is_ar724x() || -- soc_is_ar9342() || -- soc_is_ar9344()) { -- ath79_pci_irq_map = ar724x_pci_irq_map; -- ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map); -- } else if (soc_is_qca955x()) { -- ath79_pci_irq_map = qca955x_pci_irq_map; -- ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map); -- } else if (soc_is_qca956x()) { -- ath79_pci_irq_map = qca956x_pci_irq_map; -- ath79_pci_nr_irqs = ARRAY_SIZE(qca956x_pci_irq_map); -- } else { -- pr_crit("pci %s: invalid irq map\n", -- pci_name((struct pci_dev *) dev)); -- return irq; -- } -- } -- -- for (i = 0; i < ath79_pci_nr_irqs; i++) { -- const struct ath79_pci_irq *entry; -- -- entry = &ath79_pci_irq_map[i]; -- if (entry->bus == dev->bus->number && -- entry->slot == slot && -- entry->pin == pin) { -- irq = entry->irq; -- break; -- } -- } -- -- if (irq < 0) -- pr_crit("pci %s: no irq found for pin %u\n", -- pci_name((struct pci_dev *) dev), pin); -- else -- pr_info("pci %s: using irq %d for pin %u\n", -- pci_name((struct pci_dev *) dev), irq, pin); -- -- return irq; --} -- --int pcibios_plat_dev_init(struct pci_dev *dev) --{ -- if (ath79_pci_plat_dev_init) -- return ath79_pci_plat_dev_init(dev); -- -- return 0; --} -- --void __init ath79_pci_set_irq_map(unsigned nr_irqs, -- const struct ath79_pci_irq *map) --{ -- ath79_pci_nr_irqs = nr_irqs; -- ath79_pci_irq_map = map; --} -- --void __init ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev)) --{ -- ath79_pci_plat_dev_init = func; --} -- --static struct platform_device * --ath79_register_pci_ar71xx(void) --{ -- struct platform_device *pdev; -- struct resource res[4]; -- -- memset(res, 0, sizeof(res)); -- -- res[0].name = "cfg_base"; -- res[0].flags = IORESOURCE_MEM; -- res[0].start = AR71XX_PCI_CFG_BASE; -- res[0].end = AR71XX_PCI_CFG_BASE + AR71XX_PCI_CFG_SIZE - 1; -- -- res[1].flags = IORESOURCE_IRQ; -- res[1].start = ATH79_CPU_IRQ(2); -- res[1].end = ATH79_CPU_IRQ(2); -- -- res[2].name = "io_base"; -- res[2].flags = IORESOURCE_IO; -- res[2].start = 0; -- res[2].end = 0; -- -- res[3].name = "mem_base"; -- res[3].flags = IORESOURCE_MEM; -- res[3].start = AR71XX_PCI_MEM_BASE; -- res[3].end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1; -- -- pdev = platform_device_register_simple("ar71xx-pci", -1, -- res, ARRAY_SIZE(res)); -- return pdev; --} -- --static struct platform_device * --ath79_register_pci_ar724x(int id, -- unsigned long cfg_base, -- unsigned long ctrl_base, -- unsigned long crp_base, -- unsigned long mem_base, -- unsigned long mem_size, -- unsigned long io_base, -- int irq) --{ -- struct platform_device *pdev; -- struct resource res[6]; -- -- memset(res, 0, sizeof(res)); -- -- res[0].name = "cfg_base"; -- res[0].flags = IORESOURCE_MEM; -- res[0].start = cfg_base; -- res[0].end = cfg_base + AR724X_PCI_CFG_SIZE - 1; -- -- res[1].name = "ctrl_base"; -- res[1].flags = IORESOURCE_MEM; -- res[1].start = ctrl_base; -- res[1].end = ctrl_base + AR724X_PCI_CTRL_SIZE - 1; -- -- res[2].flags = IORESOURCE_IRQ; -- res[2].start = irq; -- res[2].end = irq; -- -- res[3].name = "mem_base"; -- res[3].flags = IORESOURCE_MEM; -- res[3].start = mem_base; -- res[3].end = mem_base + mem_size - 1; -- -- res[4].name = "io_base"; -- res[4].flags = IORESOURCE_IO; -- res[4].start = io_base; -- res[4].end = io_base; -- -- res[5].name = "crp_base"; -- res[5].flags = IORESOURCE_MEM; -- res[5].start = crp_base; -- res[5].end = crp_base + AR724X_PCI_CRP_SIZE - 1; -- -- pdev = platform_device_register_simple("ar724x-pci", id, -- res, ARRAY_SIZE(res)); -- return pdev; --} -- --int __init ath79_register_pci(void) --{ -- struct platform_device *pdev = NULL; -- -- if (soc_is_ar71xx()) { -- pdev = ath79_register_pci_ar71xx(); -- } else if (soc_is_ar724x()) { -- pdev = ath79_register_pci_ar724x(-1, -- AR724X_PCI_CFG_BASE, -- AR724X_PCI_CTRL_BASE, -- AR724X_PCI_CRP_BASE, -- AR724X_PCI_MEM_BASE, -- AR724X_PCI_MEM_SIZE, -- 0, -- ATH79_CPU_IRQ(2)); -- } else if (soc_is_ar9342() || -- soc_is_ar9344()) { -- u32 bootstrap; -- -- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); -- if ((bootstrap & AR934X_BOOTSTRAP_PCIE_RC) == 0) -- return -ENODEV; -- -- pdev = ath79_register_pci_ar724x(-1, -- AR724X_PCI_CFG_BASE, -- AR724X_PCI_CTRL_BASE, -- AR724X_PCI_CRP_BASE, -- AR724X_PCI_MEM_BASE, -- AR724X_PCI_MEM_SIZE, -- 0, -- ATH79_IP2_IRQ(0)); -- } else if (soc_is_qca9558()) { -- pdev = ath79_register_pci_ar724x(0, -- QCA955X_PCI_CFG_BASE0, -- QCA955X_PCI_CTRL_BASE0, -- QCA955X_PCI_CRP_BASE0, -- QCA955X_PCI_MEM_BASE0, -- QCA955X_PCI_MEM_SIZE, -- 0, -- ATH79_IP2_IRQ(0)); -- -- pdev = ath79_register_pci_ar724x(1, -- QCA955X_PCI_CFG_BASE1, -- QCA955X_PCI_CTRL_BASE1, -- QCA955X_PCI_CRP_BASE1, -- QCA955X_PCI_MEM_BASE1, -- QCA955X_PCI_MEM_SIZE, -- 1, -- ATH79_IP3_IRQ(2)); -- } else if (soc_is_qca956x()) { -- pdev = ath79_register_pci_ar724x(0, -- QCA956X_PCI_CFG_BASE1, -- QCA956X_PCI_CTRL_BASE1, -- QCA956X_PCI_CRP_BASE1, -- QCA956X_PCI_MEM_BASE1, -- QCA956X_PCI_MEM_SIZE, -- 1, -- ATH79_IP3_IRQ(2)); -- } else { -- /* No PCI support */ -- return -ENODEV; -- } -- -- if (!pdev) -- pr_err("unable to register PCI controller device\n"); -- -- return pdev ? 0 : -ENODEV; --} ---- a/arch/mips/pci/Makefile -+++ b/arch/mips/pci/Makefile -@@ -29,6 +29,7 @@ obj-$(CONFIG_MIPS_PCI_VIRTIO) += pci-vir - # - # These are still pretty much in the old state, watch, go blind. - # -+obj-$(CONFIG_ATH79) += fixup-ath79.o - obj-$(CONFIG_LASAT) += pci-lasat.o - obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o - obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o ---- /dev/null -+++ b/arch/mips/pci/fixup-ath79.c -@@ -0,0 +1,21 @@ -+/* -+ * Copyright (C) 2018 John Crispin <john@phrozen.org> -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include <linux/pci.h> -+//#include <linux/of_irq.h> -+#include <linux/of_pci.h> -+ -+int pcibios_plat_dev_init(struct pci_dev *dev) -+{ -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ return of_irq_parse_and_map_pci(dev, slot, pin); -+} diff --git a/target/linux/ath79/patches-4.14/0023-MIPS-ath79-drop-mach-files.patch b/target/linux/ath79/patches-4.14/0023-MIPS-ath79-drop-mach-files.patch deleted file mode 100644 index 2d9a9bc..0000000 --- a/target/linux/ath79/patches-4.14/0023-MIPS-ath79-drop-mach-files.patch +++ /dev/null @@ -1,742 +0,0 @@ -From 6e38a86d50dba5cc1da9bfd07969d76dd3ac2dda Mon Sep 17 00:00:00 2001 -From: John Crispin <john@phrozen.org> -Date: Tue, 6 Mar 2018 09:28:13 +0100 -Subject: [PATCH 23/27] MIPS: ath79: drop mach files - -Signed-off-by: John Crispin <john@phrozen.org> ---- - arch/mips/ath79/Kconfig | 73 ------------------- - arch/mips/ath79/Makefile | 10 --- - arch/mips/ath79/mach-ap121.c | 92 ------------------------ - arch/mips/ath79/mach-ap136.c | 156 ----------------------------------------- - arch/mips/ath79/mach-ap81.c | 100 -------------------------- - arch/mips/ath79/mach-db120.c | 136 ----------------------------------- - arch/mips/ath79/mach-pb44.c | 128 --------------------------------- - arch/mips/ath79/mach-ubnt-xm.c | 126 --------------------------------- - 8 files changed, 821 deletions(-) - delete mode 100644 arch/mips/ath79/mach-ap121.c - delete mode 100644 arch/mips/ath79/mach-ap136.c - delete mode 100644 arch/mips/ath79/mach-ap81.c - delete mode 100644 arch/mips/ath79/mach-db120.c - delete mode 100644 arch/mips/ath79/mach-pb44.c - delete mode 100644 arch/mips/ath79/mach-ubnt-xm.c - ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -1,79 +1,6 @@ - # SPDX-License-Identifier: GPL-2.0 - if ATH79 - --menu "Atheros AR71XX/AR724X/AR913X machine selection" -- --config ATH79_MACH_AP121 -- bool "Atheros AP121 reference board" -- select SOC_AR933X -- select ATH79_DEV_GPIO_BUTTONS -- select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_SPI -- select ATH79_DEV_USB -- select ATH79_DEV_WMAC -- help -- Say 'Y' here if you want your kernel to support the -- Atheros AP121 reference board. -- --config ATH79_MACH_AP136 -- bool "Atheros AP136 reference board" -- select SOC_QCA955X -- select ATH79_DEV_GPIO_BUTTONS -- select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_SPI -- select ATH79_DEV_USB -- select ATH79_DEV_WMAC -- help -- Say 'Y' here if you want your kernel to support the -- Atheros AP136 reference board. -- --config ATH79_MACH_AP81 -- bool "Atheros AP81 reference board" -- select SOC_AR913X -- select ATH79_DEV_GPIO_BUTTONS -- select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_SPI -- select ATH79_DEV_USB -- select ATH79_DEV_WMAC -- help -- Say 'Y' here if you want your kernel to support the -- Atheros AP81 reference board. -- --config ATH79_MACH_DB120 -- bool "Atheros DB120 reference board" -- select SOC_AR934X -- select ATH79_DEV_GPIO_BUTTONS -- select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_SPI -- select ATH79_DEV_USB -- select ATH79_DEV_WMAC -- help -- Say 'Y' here if you want your kernel to support the -- Atheros DB120 reference board. -- --config ATH79_MACH_PB44 -- bool "Atheros PB44 reference board" -- select SOC_AR71XX -- select ATH79_DEV_GPIO_BUTTONS -- select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_SPI -- select ATH79_DEV_USB -- help -- Say 'Y' here if you want your kernel to support the -- Atheros PB44 reference board. -- --config ATH79_MACH_UBNT_XM -- bool "Ubiquiti Networks XM (rev 1.0) board" -- select SOC_AR724X -- select ATH79_DEV_GPIO_BUTTONS -- select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_SPI -- help -- Say 'Y' here if you want your kernel to support the -- Ubiquiti Networks XM (rev 1.0) board. -- --endmenu -- - config SOC_AR71XX - select HW_HAS_PCI - def_bool n ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -21,13 +21,3 @@ obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev - obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o - obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o - obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o -- --# --# Machines --# --obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o --obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o --obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o --obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o --obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o --obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o ---- a/arch/mips/ath79/mach-ap121.c -+++ /dev/null -@@ -1,92 +0,0 @@ --/* -- * Atheros AP121 board support -- * -- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> -- * -- * This program is free software; you can redistribute it and/or modify it -- * under the terms of the GNU General Public License version 2 as published -- * by the Free Software Foundation. -- */ -- --#include "machtypes.h" --#include "dev-gpio-buttons.h" --#include "dev-leds-gpio.h" --#include "dev-spi.h" --#include "dev-usb.h" --#include "dev-wmac.h" -- --#define AP121_GPIO_LED_WLAN 0 --#define AP121_GPIO_LED_USB 1 -- --#define AP121_GPIO_BTN_JUMPSTART 11 --#define AP121_GPIO_BTN_RESET 12 -- --#define AP121_KEYS_POLL_INTERVAL 20 /* msecs */ --#define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL) -- --#define AP121_CAL_DATA_ADDR 0x1fff1000 -- --static struct gpio_led ap121_leds_gpio[] __initdata = { -- { -- .name = "ap121:green:usb", -- .gpio = AP121_GPIO_LED_USB, -- .active_low = 0, -- }, -- { -- .name = "ap121:green:wlan", -- .gpio = AP121_GPIO_LED_WLAN, -- .active_low = 0, -- }, --}; -- --static struct gpio_keys_button ap121_gpio_keys[] __initdata = { -- { -- .desc = "jumpstart button", -- .type = EV_KEY, -- .code = KEY_WPS_BUTTON, -- .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, -- .gpio = AP121_GPIO_BTN_JUMPSTART, -- .active_low = 1, -- }, -- { -- .desc = "reset button", -- .type = EV_KEY, -- .code = KEY_RESTART, -- .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, -- .gpio = AP121_GPIO_BTN_RESET, -- .active_low = 1, -- } --}; -- --static struct spi_board_info ap121_spi_info[] = { -- { -- .bus_num = 0, -- .chip_select = 0, -- .max_speed_hz = 25000000, -- .modalias = "mx25l1606e", -- } --}; -- --static struct ath79_spi_platform_data ap121_spi_data = { -- .bus_num = 0, -- .num_chipselect = 1, --}; -- --static void __init ap121_setup(void) --{ -- u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR); -- -- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio), -- ap121_leds_gpio); -- ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL, -- ARRAY_SIZE(ap121_gpio_keys), -- ap121_gpio_keys); -- -- ath79_register_spi(&ap121_spi_data, ap121_spi_info, -- ARRAY_SIZE(ap121_spi_info)); -- ath79_register_usb(); -- ath79_register_wmac(cal_data); --} -- --MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board", -- ap121_setup); ---- a/arch/mips/ath79/mach-ap136.c -+++ /dev/null -@@ -1,156 +0,0 @@ --/* -- * Qualcomm Atheros AP136 reference board support -- * -- * Copyright (c) 2012 Qualcomm Atheros -- * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org> -- * -- * Permission to use, copy, modify, and/or distribute this software for any -- * purpose with or without fee is hereby granted, provided that the above -- * copyright notice and this permission notice appear in all copies. -- * -- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -- * -- */ -- --#include <linux/pci.h> --#include <linux/ath9k_platform.h> -- --#include "machtypes.h" --#include "dev-gpio-buttons.h" --#include "dev-leds-gpio.h" --#include "dev-spi.h" --#include "dev-usb.h" --#include "dev-wmac.h" --#include "pci.h" -- --#define AP136_GPIO_LED_STATUS_RED 14 --#define AP136_GPIO_LED_STATUS_GREEN 19 --#define AP136_GPIO_LED_USB 4 --#define AP136_GPIO_LED_WLAN_2G 13 --#define AP136_GPIO_LED_WLAN_5G 12 --#define AP136_GPIO_LED_WPS_RED 15 --#define AP136_GPIO_LED_WPS_GREEN 20 -- --#define AP136_GPIO_BTN_WPS 16 --#define AP136_GPIO_BTN_RFKILL 21 -- --#define AP136_KEYS_POLL_INTERVAL 20 /* msecs */ --#define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL) -- --#define AP136_WMAC_CALDATA_OFFSET 0x1000 --#define AP136_PCIE_CALDATA_OFFSET 0x5000 -- --static struct gpio_led ap136_leds_gpio[] __initdata = { -- { -- .name = "qca:green:status", -- .gpio = AP136_GPIO_LED_STATUS_GREEN, -- .active_low = 1, -- }, -- { -- .name = "qca:red:status", -- .gpio = AP136_GPIO_LED_STATUS_RED, -- .active_low = 1, -- }, -- { -- .name = "qca:green:wps", -- .gpio = AP136_GPIO_LED_WPS_GREEN, -- .active_low = 1, -- }, -- { -- .name = "qca:red:wps", -- .gpio = AP136_GPIO_LED_WPS_RED, -- .active_low = 1, -- }, -- { -- .name = "qca:red:wlan-2g", -- .gpio = AP136_GPIO_LED_WLAN_2G, -- .active_low = 1, -- }, -- { -- .name = "qca:red:usb", -- .gpio = AP136_GPIO_LED_USB, -- .active_low = 1, -- } --}; -- --static struct gpio_keys_button ap136_gpio_keys[] __initdata = { -- { -- .desc = "WPS button", -- .type = EV_KEY, -- .code = KEY_WPS_BUTTON, -- .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL, -- .gpio = AP136_GPIO_BTN_WPS, -- .active_low = 1, -- }, -- { -- .desc = "RFKILL button", -- .type = EV_KEY, -- .code = KEY_RFKILL, -- .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL, -- .gpio = AP136_GPIO_BTN_RFKILL, -- .active_low = 1, -- }, --}; -- --static struct spi_board_info ap136_spi_info[] = { -- { -- .bus_num = 0, -- .chip_select = 0, -- .max_speed_hz = 25000000, -- .modalias = "mx25l6405d", -- } --}; -- --static struct ath79_spi_platform_data ap136_spi_data = { -- .bus_num = 0, -- .num_chipselect = 1, --}; -- --#ifdef CONFIG_PCI --static struct ath9k_platform_data ap136_ath9k_data; -- --static int ap136_pci_plat_dev_init(struct pci_dev *dev) --{ -- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0) -- dev->dev.platform_data = &ap136_ath9k_data; -- -- return 0; --} -- --static void __init ap136_pci_init(u8 *eeprom) --{ -- memcpy(ap136_ath9k_data.eeprom_data, eeprom, -- sizeof(ap136_ath9k_data.eeprom_data)); -- -- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init); -- ath79_register_pci(); --} --#else --static inline void ap136_pci_init(u8 *eeprom) {} --#endif /* CONFIG_PCI */ -- --static void __init ap136_setup(void) --{ -- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); -- -- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio), -- ap136_leds_gpio); -- ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL, -- ARRAY_SIZE(ap136_gpio_keys), -- ap136_gpio_keys); -- ath79_register_spi(&ap136_spi_data, ap136_spi_info, -- ARRAY_SIZE(ap136_spi_info)); -- ath79_register_usb(); -- ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET); -- ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET); --} -- --MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010", -- "Atheros AP136-010 reference board", -- ap136_setup); ---- a/arch/mips/ath79/mach-ap81.c -+++ /dev/null -@@ -1,100 +0,0 @@ --/* -- * Atheros AP81 board support -- * -- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> -- * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org> -- * -- * This program is free software; you can redistribute it and/or modify it -- * under the terms of the GNU General Public License version 2 as published -- * by the Free Software Foundation. -- */ -- --#include "machtypes.h" --#include "dev-wmac.h" --#include "dev-gpio-buttons.h" --#include "dev-leds-gpio.h" --#include "dev-spi.h" --#include "dev-usb.h" -- --#define AP81_GPIO_LED_STATUS 1 --#define AP81_GPIO_LED_AOSS 3 --#define AP81_GPIO_LED_WLAN 6 --#define AP81_GPIO_LED_POWER 14 -- --#define AP81_GPIO_BTN_SW4 12 --#define AP81_GPIO_BTN_SW1 21 -- --#define AP81_KEYS_POLL_INTERVAL 20 /* msecs */ --#define AP81_KEYS_DEBOUNCE_INTERVAL (3 * AP81_KEYS_POLL_INTERVAL) -- --#define AP81_CAL_DATA_ADDR 0x1fff1000 -- --static struct gpio_led ap81_leds_gpio[] __initdata = { -- { -- .name = "ap81:green:status", -- .gpio = AP81_GPIO_LED_STATUS, -- .active_low = 1, -- }, { -- .name = "ap81:amber:aoss", -- .gpio = AP81_GPIO_LED_AOSS, -- .active_low = 1, -- }, { -- .name = "ap81:green:wlan", -- .gpio = AP81_GPIO_LED_WLAN, -- .active_low = 1, -- }, { -- .name = "ap81:green:power", -- .gpio = AP81_GPIO_LED_POWER, -- .active_low = 1, -- } --}; -- --static struct gpio_keys_button ap81_gpio_keys[] __initdata = { -- { -- .desc = "sw1", -- .type = EV_KEY, -- .code = BTN_0, -- .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL, -- .gpio = AP81_GPIO_BTN_SW1, -- .active_low = 1, -- } , { -- .desc = "sw4", -- .type = EV_KEY, -- .code = BTN_1, -- .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL, -- .gpio = AP81_GPIO_BTN_SW4, -- .active_low = 1, -- } --}; -- --static struct spi_board_info ap81_spi_info[] = { -- { -- .bus_num = 0, -- .chip_select = 0, -- .max_speed_hz = 25000000, -- .modalias = "m25p64", -- } --}; -- --static struct ath79_spi_platform_data ap81_spi_data = { -- .bus_num = 0, -- .num_chipselect = 1, --}; -- --static void __init ap81_setup(void) --{ -- u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR); -- -- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio), -- ap81_leds_gpio); -- ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL, -- ARRAY_SIZE(ap81_gpio_keys), -- ap81_gpio_keys); -- ath79_register_spi(&ap81_spi_data, ap81_spi_info, -- ARRAY_SIZE(ap81_spi_info)); -- ath79_register_wmac(cal_data); -- ath79_register_usb(); --} -- --MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board", -- ap81_setup); ---- a/arch/mips/ath79/mach-db120.c -+++ /dev/null -@@ -1,136 +0,0 @@ --/* -- * Atheros DB120 reference board support -- * -- * Copyright (c) 2011 Qualcomm Atheros -- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org> -- * -- * Permission to use, copy, modify, and/or distribute this software for any -- * purpose with or without fee is hereby granted, provided that the above -- * copyright notice and this permission notice appear in all copies. -- * -- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -- * -- */ -- --#include <linux/pci.h> --#include <linux/ath9k_platform.h> -- --#include "machtypes.h" --#include "dev-gpio-buttons.h" --#include "dev-leds-gpio.h" --#include "dev-spi.h" --#include "dev-usb.h" --#include "dev-wmac.h" --#include "pci.h" -- --#define DB120_GPIO_LED_WLAN_5G 12 --#define DB120_GPIO_LED_WLAN_2G 13 --#define DB120_GPIO_LED_STATUS 14 --#define DB120_GPIO_LED_WPS 15 -- --#define DB120_GPIO_BTN_WPS 16 -- --#define DB120_KEYS_POLL_INTERVAL 20 /* msecs */ --#define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL) -- --#define DB120_WMAC_CALDATA_OFFSET 0x1000 --#define DB120_PCIE_CALDATA_OFFSET 0x5000 -- --static struct gpio_led db120_leds_gpio[] __initdata = { -- { -- .name = "db120:green:status", -- .gpio = DB120_GPIO_LED_STATUS, -- .active_low = 1, -- }, -- { -- .name = "db120:green:wps", -- .gpio = DB120_GPIO_LED_WPS, -- .active_low = 1, -- }, -- { -- .name = "db120:green:wlan-5g", -- .gpio = DB120_GPIO_LED_WLAN_5G, -- .active_low = 1, -- }, -- { -- .name = "db120:green:wlan-2g", -- .gpio = DB120_GPIO_LED_WLAN_2G, -- .active_low = 1, -- }, --}; -- --static struct gpio_keys_button db120_gpio_keys[] __initdata = { -- { -- .desc = "WPS button", -- .type = EV_KEY, -- .code = KEY_WPS_BUTTON, -- .debounce_interval = DB120_KEYS_DEBOUNCE_INTERVAL, -- .gpio = DB120_GPIO_BTN_WPS, -- .active_low = 1, -- }, --}; -- --static struct spi_board_info db120_spi_info[] = { -- { -- .bus_num = 0, -- .chip_select = 0, -- .max_speed_hz = 25000000, -- .modalias = "s25sl064a", -- } --}; -- --static struct ath79_spi_platform_data db120_spi_data = { -- .bus_num = 0, -- .num_chipselect = 1, --}; -- --#ifdef CONFIG_PCI --static struct ath9k_platform_data db120_ath9k_data; -- --static int db120_pci_plat_dev_init(struct pci_dev *dev) --{ -- switch (PCI_SLOT(dev->devfn)) { -- case 0: -- dev->dev.platform_data = &db120_ath9k_data; -- break; -- } -- -- return 0; --} -- --static void __init db120_pci_init(u8 *eeprom) --{ -- memcpy(db120_ath9k_data.eeprom_data, eeprom, -- sizeof(db120_ath9k_data.eeprom_data)); -- -- ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init); -- ath79_register_pci(); --} --#else --static inline void db120_pci_init(u8 *eeprom) {} --#endif /* CONFIG_PCI */ -- --static void __init db120_setup(void) --{ -- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); -- -- ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio), -- db120_leds_gpio); -- ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL, -- ARRAY_SIZE(db120_gpio_keys), -- db120_gpio_keys); -- ath79_register_spi(&db120_spi_data, db120_spi_info, -- ARRAY_SIZE(db120_spi_info)); -- ath79_register_usb(); -- ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET); -- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET); --} -- --MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board", -- db120_setup); ---- a/arch/mips/ath79/mach-pb44.c -+++ /dev/null -@@ -1,122 +0,0 @@ --/* -- * Atheros PB44 reference board support -- * -- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> -- * -- * This program is free software; you can redistribute it and/or modify it -- * under the terms of the GNU General Public License version 2 as published -- * by the Free Software Foundation. -- */ -- --#include <linux/init.h> --#include <linux/platform_device.h> --#include <linux/i2c.h> --#include <linux/i2c-gpio.h> --#include <linux/platform_data/pcf857x.h> -- --#include "machtypes.h" --#include "dev-gpio-buttons.h" --#include "dev-leds-gpio.h" --#include "dev-spi.h" --#include "dev-usb.h" --#include "pci.h" -- --#define PB44_GPIO_I2C_SCL 0 --#define PB44_GPIO_I2C_SDA 1 -- --#define PB44_GPIO_EXP_BASE 16 --#define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + 6) --#define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + 8) --#define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + 9) --#define PB44_GPIO_LED_JUMP2 (PB44_GPIO_EXP_BASE + 10) -- --#define PB44_KEYS_POLL_INTERVAL 20 /* msecs */ --#define PB44_KEYS_DEBOUNCE_INTERVAL (3 * PB44_KEYS_POLL_INTERVAL) -- --static struct i2c_gpio_platform_data pb44_i2c_gpio_data = { -- .sda_pin = PB44_GPIO_I2C_SDA, -- .scl_pin = PB44_GPIO_I2C_SCL, --}; -- --static struct platform_device pb44_i2c_gpio_device = { -- .name = "i2c-gpio", -- .id = 0, -- .dev = { -- .platform_data = &pb44_i2c_gpio_data, -- } --}; -- --static struct pcf857x_platform_data pb44_pcf857x_data = { -- .gpio_base = PB44_GPIO_EXP_BASE, --}; -- --static struct i2c_board_info pb44_i2c_board_info[] __initdata = { -- { -- I2C_BOARD_INFO("pcf8575", 0x20), -- .platform_data = &pb44_pcf857x_data, -- }, --}; -- --static struct gpio_led pb44_leds_gpio[] __initdata = { -- { -- .name = "pb44:amber:jump1", -- .gpio = PB44_GPIO_LED_JUMP1, -- .active_low = 1, -- }, { -- .name = "pb44:green:jump2", -- .gpio = PB44_GPIO_LED_JUMP2, -- .active_low = 1, -- }, --}; -- --static struct gpio_keys_button pb44_gpio_keys[] __initdata = { -- { -- .desc = "soft_reset", -- .type = EV_KEY, -- .code = KEY_RESTART, -- .debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL, -- .gpio = PB44_GPIO_SW_RESET, -- .active_low = 1, -- } , { -- .desc = "jumpstart", -- .type = EV_KEY, -- .code = KEY_WPS_BUTTON, -- .debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL, -- .gpio = PB44_GPIO_SW_JUMP, -- .active_low = 1, -- } --}; -- --static struct spi_board_info pb44_spi_info[] = { -- { -- .bus_num = 0, -- .chip_select = 0, -- .max_speed_hz = 25000000, -- .modalias = "m25p64", -- }, --}; -- --static struct ath79_spi_platform_data pb44_spi_data = { -- .bus_num = 0, -- .num_chipselect = 1, --}; -- --static void __init pb44_init(void) --{ -- i2c_register_board_info(0, pb44_i2c_board_info, -- ARRAY_SIZE(pb44_i2c_board_info)); -- platform_device_register(&pb44_i2c_gpio_device); -- -- ath79_register_leds_gpio(-1, ARRAY_SIZE(pb44_leds_gpio), -- pb44_leds_gpio); -- ath79_register_gpio_keys_polled(-1, PB44_KEYS_POLL_INTERVAL, -- ARRAY_SIZE(pb44_gpio_keys), -- pb44_gpio_keys); -- ath79_register_spi(&pb44_spi_data, pb44_spi_info, -- ARRAY_SIZE(pb44_spi_info)); -- ath79_register_usb(); -- ath79_register_pci(); --} -- --MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board", -- pb44_init); diff --git a/target/linux/ath79/patches-4.14/0024-GPIO-add-named-gpio-exports.patch b/target/linux/ath79/patches-4.14/0024-GPIO-add-named-gpio-exports.patch deleted file mode 100644 index 0c1bc73..0000000 --- a/target/linux/ath79/patches-4.14/0024-GPIO-add-named-gpio-exports.patch +++ /dev/null @@ -1,166 +0,0 @@ -From 4267880319bc1a2270d352e0ded6d6386242a7ef Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Tue, 12 Aug 2014 20:49:27 +0200 -Subject: [PATCH 24/53] GPIO: add named gpio exports - -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++ - drivers/gpio/gpiolib-sysfs.c | 10 +++++- - include/asm-generic/gpio.h | 6 ++++ - include/linux/gpio/consumer.h | 8 +++++ - 4 files changed, 91 insertions(+), 1 deletion(-) - ---- a/drivers/gpio/gpiolib-of.c -+++ b/drivers/gpio/gpiolib-of.c -@@ -23,6 +23,8 @@ - #include <linux/pinctrl/pinctrl.h> - #include <linux/slab.h> - #include <linux/gpio/machine.h> -+#include <linux/init.h> -+#include <linux/platform_device.h> - - #include "gpiolib.h" - -@@ -506,3 +508,69 @@ void of_gpiochip_remove(struct gpio_chip - gpiochip_remove_pin_ranges(chip); - of_node_put(chip->of_node); - } -+ -+static struct of_device_id gpio_export_ids[] = { -+ { .compatible = "gpio-export" }, -+ { /* sentinel */ } -+}; -+ -+static int __init of_gpio_export_probe(struct platform_device *pdev) -+{ -+ struct device_node *np = pdev->dev.of_node; -+ struct device_node *cnp; -+ u32 val; -+ int nb = 0; -+ -+ for_each_child_of_node(np, cnp) { -+ const char *name = NULL; -+ int gpio; -+ bool dmc; -+ int max_gpio = 1; -+ int i; -+ -+ of_property_read_string(cnp, "gpio-export,name", &name); -+ -+ if (!name) -+ max_gpio = of_gpio_count(cnp); -+ -+ for (i = 0; i < max_gpio; i++) { -+ unsigned flags = 0; -+ enum of_gpio_flags of_flags; -+ -+ gpio = of_get_gpio_flags(cnp, i, &of_flags); -+ -+ if (of_flags == OF_GPIO_ACTIVE_LOW) -+ flags |= GPIOF_ACTIVE_LOW; -+ -+ if (!of_property_read_u32(cnp, "gpio-export,output", &val)) -+ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; -+ else -+ flags |= GPIOF_IN; -+ -+ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np))) -+ continue; -+ -+ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change"); -+ gpio_export_with_name(gpio, dmc, name); -+ nb++; -+ } -+ } -+ -+ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb); -+ -+ return 0; -+} -+ -+static struct platform_driver gpio_export_driver = { -+ .driver = { -+ .name = "gpio-export", -+ .owner = THIS_MODULE, -+ .of_match_table = of_match_ptr(gpio_export_ids), -+ }, -+}; -+ -+static int __init of_gpio_export_init(void) -+{ -+ return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe); -+} -+device_initcall(of_gpio_export_init); ---- a/drivers/gpio/gpiolib-sysfs.c -+++ b/drivers/gpio/gpiolib-sysfs.c -@@ -553,7 +553,7 @@ static struct class gpio_class = { - * - * Returns zero on success, else an error. - */ --int gpiod_export(struct gpio_desc *desc, bool direction_may_change) -+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name) - { - struct gpio_chip *chip; - struct gpio_device *gdev; -@@ -615,6 +615,8 @@ int gpiod_export(struct gpio_desc *desc, - offset = gpio_chip_hwgpio(desc); - if (chip->names && chip->names[offset]) - ioname = chip->names[offset]; -+ if (name) -+ ioname = name; - - dev = device_create_with_groups(&gpio_class, &gdev->dev, - MKDEV(0, 0), data, gpio_groups, -@@ -636,6 +638,12 @@ err_unlock: - gpiod_dbg(desc, "%s: status %d\n", __func__, status); - return status; - } -+EXPORT_SYMBOL_GPL(__gpiod_export); -+ -+int gpiod_export(struct gpio_desc *desc, bool direction_may_change) -+{ -+ return __gpiod_export(desc, direction_may_change, NULL); -+} - EXPORT_SYMBOL_GPL(gpiod_export); - - static int match_export(struct device *dev, const void *desc) ---- a/include/asm-generic/gpio.h -+++ b/include/asm-generic/gpio.h -@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g - return gpiod_export(gpio_to_desc(gpio), direction_may_change); - } - -+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); -+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name) -+{ -+ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name); -+} -+ - static inline int gpio_export_link(struct device *dev, const char *name, - unsigned gpio) - { ---- a/include/linux/gpio/consumer.h -+++ b/include/linux/gpio/consumer.h -@@ -451,6 +451,7 @@ struct gpio_desc *devm_fwnode_get_gpiod_ - - #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS) - -+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); - int gpiod_export(struct gpio_desc *desc, bool direction_may_change); - int gpiod_export_link(struct device *dev, const char *name, - struct gpio_desc *desc); -@@ -458,6 +459,13 @@ void gpiod_unexport(struct gpio_desc *de - - #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */ - -+static inline int _gpiod_export(struct gpio_desc *desc, -+ bool direction_may_change, -+ const char *name) -+{ -+ return -ENOSYS; -+} -+ - static inline int gpiod_export(struct gpio_desc *desc, - bool direction_may_change) - { diff --git a/target/linux/ath79/patches-4.14/0024-MIPS-ath79-drop-pdata-helpers.patch b/target/linux/ath79/patches-4.14/0024-MIPS-ath79-drop-pdata-helpers.patch deleted file mode 100644 index 8c4956e..0000000 --- a/target/linux/ath79/patches-4.14/0024-MIPS-ath79-drop-pdata-helpers.patch +++ /dev/null @@ -1,922 +0,0 @@ -From c038250c16cdefd6d74ad61309ba84973eceb630 Mon Sep 17 00:00:00 2001 -From: John Crispin <john@phrozen.org> -Date: Tue, 6 Mar 2018 09:29:46 +0100 -Subject: [PATCH 24/27] MIPS: ath79: drop pdata helpers - -Signed-off-by: John Crispin <john@phrozen.org> ---- - arch/mips/ath79/dev-common.c | 168 ------------------------- - arch/mips/ath79/dev-common.h | 18 --- - arch/mips/ath79/dev-gpio-buttons.c | 56 --------- - arch/mips/ath79/dev-gpio-buttons.h | 23 ---- - arch/mips/ath79/dev-leds-gpio.c | 54 --------- - arch/mips/ath79/dev-leds-gpio.h | 21 ---- - arch/mips/ath79/dev-spi.c | 38 ------ - arch/mips/ath79/dev-spi.h | 22 ---- - arch/mips/ath79/dev-usb.c | 242 ------------------------------------- - arch/mips/ath79/dev-usb.h | 17 --- - arch/mips/ath79/dev-wmac.c | 155 ------------------------ - arch/mips/ath79/dev-wmac.h | 17 --- - arch/mips/ath79/setup.c | 5 - - 13 files changed, 836 deletions(-) - delete mode 100644 arch/mips/ath79/dev-common.c - delete mode 100644 arch/mips/ath79/dev-common.h - delete mode 100644 arch/mips/ath79/dev-gpio-buttons.c - delete mode 100644 arch/mips/ath79/dev-gpio-buttons.h - delete mode 100644 arch/mips/ath79/dev-leds-gpio.c - delete mode 100644 arch/mips/ath79/dev-leds-gpio.h - delete mode 100644 arch/mips/ath79/dev-spi.c - delete mode 100644 arch/mips/ath79/dev-spi.h - delete mode 100644 arch/mips/ath79/dev-usb.c - delete mode 100644 arch/mips/ath79/dev-usb.h - delete mode 100644 arch/mips/ath79/dev-wmac.c - delete mode 100644 arch/mips/ath79/dev-wmac.h - ---- a/arch/mips/ath79/dev-common.c -+++ /dev/null -@@ -1,168 +0,0 @@ --/* -- * Atheros AR71XX/AR724X/AR913X common devices -- * -- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> -- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -- * -- * Parts of this file are based on Atheros' 2.6.15 BSP -- * -- * This program is free software; you can redistribute it and/or modify it -- * under the terms of the GNU General Public License version 2 as published -- * by the Free Software Foundation. -- */ -- --#include <linux/kernel.h> --#include <linux/init.h> --#include <linux/platform_device.h> --#include <linux/platform_data/gpio-ath79.h> --#include <linux/serial_8250.h> --#include <linux/clk.h> --#include <linux/err.h> -- --#include <asm/mach-ath79/ath79.h> --#include <asm/mach-ath79/ar71xx_regs.h> --#include "common.h" --#include "dev-common.h" -- --static struct resource ath79_uart_resources[] = { -- { -- .start = AR71XX_UART_BASE, -- .end = AR71XX_UART_BASE + AR71XX_UART_SIZE - 1, -- .flags = IORESOURCE_MEM, -- }, --}; -- --#define AR71XX_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP) --static struct plat_serial8250_port ath79_uart_data[] = { -- { -- .mapbase = AR71XX_UART_BASE, -- .irq = ATH79_MISC_IRQ(3), -- .flags = AR71XX_UART_FLAGS, -- .iotype = UPIO_MEM32, -- .regshift = 2, -- }, { -- /* terminating entry */ -- } --}; -- --static struct platform_device ath79_uart_device = { -- .name = "serial8250", -- .id = PLAT8250_DEV_PLATFORM, -- .resource = ath79_uart_resources, -- .num_resources = ARRAY_SIZE(ath79_uart_resources), -- .dev = { -- .platform_data = ath79_uart_data -- }, --}; -- --static struct resource ar933x_uart_resources[] = { -- { -- .start = AR933X_UART_BASE, -- .end = AR933X_UART_BASE + AR71XX_UART_SIZE - 1, -- .flags = IORESOURCE_MEM, -- }, -- { -- .start = ATH79_MISC_IRQ(3), -- .end = ATH79_MISC_IRQ(3), -- .flags = IORESOURCE_IRQ, -- }, --}; -- --static struct platform_device ar933x_uart_device = { -- .name = "ar933x-uart", -- .id = -1, -- .resource = ar933x_uart_resources, -- .num_resources = ARRAY_SIZE(ar933x_uart_resources), --}; -- --void __init ath79_register_uart(void) --{ -- unsigned long uart_clk_rate; -- -- uart_clk_rate = ath79_get_sys_clk_rate("uart"); -- -- if (soc_is_ar71xx() || -- soc_is_ar724x() || -- soc_is_ar913x() || -- soc_is_ar934x() || -- soc_is_qca953x() || -- soc_is_qca955x() || -- soc_is_qca956x() || -- soc_is_tp9343()) { -- ath79_uart_data[0].uartclk = uart_clk_rate; -- platform_device_register(&ath79_uart_device); -- } else if (soc_is_ar933x()) { -- platform_device_register(&ar933x_uart_device); -- } else { -- BUG(); -- } --} -- --void __init ath79_register_wdt(void) --{ -- struct resource res; -- -- memset(&res, 0, sizeof(res)); -- -- res.flags = IORESOURCE_MEM; -- res.start = AR71XX_RESET_BASE + AR71XX_RESET_REG_WDOG_CTRL; -- res.end = res.start + 0x8 - 1; -- -- platform_device_register_simple("ath79-wdt", -1, &res, 1); --} -- --static struct ath79_gpio_platform_data ath79_gpio_pdata; -- --static struct resource ath79_gpio_resources[] = { -- { -- .flags = IORESOURCE_MEM, -- .start = AR71XX_GPIO_BASE, -- .end = AR71XX_GPIO_BASE + AR71XX_GPIO_SIZE - 1, -- }, -- { -- .start = ATH79_MISC_IRQ(2), -- .end = ATH79_MISC_IRQ(2), -- .flags = IORESOURCE_IRQ, -- }, --}; -- --static struct platform_device ath79_gpio_device = { -- .name = "ath79-gpio", -- .id = -1, -- .resource = ath79_gpio_resources, -- .num_resources = ARRAY_SIZE(ath79_gpio_resources), -- .dev = { -- .platform_data = &ath79_gpio_pdata -- }, --}; -- --void __init ath79_gpio_init(void) --{ -- if (soc_is_ar71xx()) { -- ath79_gpio_pdata.ngpios = AR71XX_GPIO_COUNT; -- } else if (soc_is_ar7240()) { -- ath79_gpio_pdata.ngpios = AR7240_GPIO_COUNT; -- } else if (soc_is_ar7241() || soc_is_ar7242()) { -- ath79_gpio_pdata.ngpios = AR7241_GPIO_COUNT; -- } else if (soc_is_ar913x()) { -- ath79_gpio_pdata.ngpios = AR913X_GPIO_COUNT; -- } else if (soc_is_ar933x()) { -- ath79_gpio_pdata.ngpios = AR933X_GPIO_COUNT; -- } else if (soc_is_ar934x()) { -- ath79_gpio_pdata.ngpios = AR934X_GPIO_COUNT; -- ath79_gpio_pdata.oe_inverted = 1; -- } else if (soc_is_qca953x()) { -- ath79_gpio_pdata.ngpios = QCA953X_GPIO_COUNT; -- ath79_gpio_pdata.oe_inverted = 1; -- } else if (soc_is_qca955x()) { -- ath79_gpio_pdata.ngpios = QCA955X_GPIO_COUNT; -- ath79_gpio_pdata.oe_inverted = 1; -- } else if (soc_is_qca956x() || soc_is_tp9343()) { -- ath79_gpio_pdata.ngpios = QCA956X_GPIO_COUNT; -- ath79_gpio_pdata.oe_inverted = 1; -- } else { -- BUG(); -- } -- -- platform_device_register(&ath79_gpio_device); --} ---- a/arch/mips/ath79/dev-common.h -+++ /dev/null -@@ -1,18 +0,0 @@ --/* -- * Atheros AR71XX/AR724X/AR913X common devices -- * -- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> -- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -- * -- * This program is free software; you can redistribute it and/or modify it -- * under the terms of the GNU General Public License version 2 as published -- * by the Free Software Foundation. -- */ -- --#ifndef _ATH79_DEV_COMMON_H --#define _ATH79_DEV_COMMON_H -- --void ath79_register_uart(void); --void ath79_register_wdt(void); -- --#endif /* _ATH79_DEV_COMMON_H */ ---- a/arch/mips/ath79/dev-gpio-buttons.c -+++ /dev/null -@@ -1,56 +0,0 @@ --/* -- * Atheros AR71XX/AR724X/AR913X GPIO button support -- * -- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> -- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -- * -- * This program is free software; you can redistribute it and/or modify it -- * under the terms of the GNU General Public License version 2 as published -- * by the Free Software Foundation. -- */ -- --#include "linux/init.h" --#include "linux/slab.h" --#include <linux/platform_device.h> -- --#include "dev-gpio-buttons.h" -- --void __init ath79_register_gpio_keys_polled(int id, -- unsigned poll_interval, -- unsigned nbuttons, -- struct gpio_keys_button *buttons) --{ -- struct platform_device *pdev; -- struct gpio_keys_platform_data pdata; -- struct gpio_keys_button *p; -- int err; -- -- p = kmemdup(buttons, nbuttons * sizeof(*p), GFP_KERNEL); -- if (!p) -- return; -- -- pdev = platform_device_alloc("gpio-keys-polled", id); -- if (!pdev) -- goto err_free_buttons; -- -- memset(&pdata, 0, sizeof(pdata)); -- pdata.poll_interval = poll_interval; -- pdata.nbuttons = nbuttons; -- pdata.buttons = p; -- -- err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); -- if (err) -- goto err_put_pdev; -- -- err = platform_device_add(pdev); -- if (err) -- goto err_put_pdev; -- -- return; -- --err_put_pdev: -- platform_device_put(pdev); -- --err_free_buttons: -- kfree(p); --} ---- a/arch/mips/ath79/dev-gpio-buttons.h -+++ /dev/null -@@ -1,23 +0,0 @@ --/* -- * Atheros AR71XX/AR724X/AR913X GPIO button support -- * -- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> -- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -- * -- * This program is free software; you can redistribute it and/or modify it -- * under the terms of the GNU General Public License version 2 as published -- * by the Free Software Foundation. -- */ -- --#ifndef _ATH79_DEV_GPIO_BUTTONS_H --#define _ATH79_DEV_GPIO_BUTTONS_H -- --#include <linux/input.h> --#include <linux/gpio_keys.h> -- --void ath79_register_gpio_keys_polled(int id, -- unsigned poll_interval, -- unsigned nbuttons, -- struct gpio_keys_button *buttons); -- --#endif /* _ATH79_DEV_GPIO_BUTTONS_H */ ---- a/arch/mips/ath79/dev-leds-gpio.c -+++ /dev/null -@@ -1,54 +0,0 @@ --/* -- * Atheros AR71XX/AR724X/AR913X common GPIO LEDs support -- * -- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> -- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -- * -- * This program is free software; you can redistribute it and/or modify it -- * under the terms of the GNU General Public License version 2 as published -- * by the Free Software Foundation. -- */ -- --#include <linux/init.h> --#include <linux/slab.h> --#include <linux/platform_device.h> -- --#include "dev-leds-gpio.h" -- --void __init ath79_register_leds_gpio(int id, -- unsigned num_leds, -- struct gpio_led *leds) --{ -- struct platform_device *pdev; -- struct gpio_led_platform_data pdata; -- struct gpio_led *p; -- int err; -- -- p = kmemdup(leds, num_leds * sizeof(*p), GFP_KERNEL); -- if (!p) -- return; -- -- pdev = platform_device_alloc("leds-gpio", id); -- if (!pdev) -- goto err_free_leds; -- -- memset(&pdata, 0, sizeof(pdata)); -- pdata.num_leds = num_leds; -- pdata.leds = p; -- -- err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); -- if (err) -- goto err_put_pdev; -- -- err = platform_device_add(pdev); -- if (err) -- goto err_put_pdev; -- -- return; -- --err_put_pdev: -- platform_device_put(pdev); -- --err_free_leds: -- kfree(p); --} ---- a/arch/mips/ath79/dev-leds-gpio.h -+++ /dev/null -@@ -1,21 +0,0 @@ --/* -- * Atheros AR71XX/AR724X/AR913X common GPIO LEDs support -- * -- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> -- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -- * -- * This program is free software; you can redistribute it and/or modify it -- * under the terms of the GNU General Public License version 2 as published -- * by the Free Software Foundation. -- */ -- --#ifndef _ATH79_DEV_LEDS_GPIO_H --#define _ATH79_DEV_LEDS_GPIO_H -- --#include <linux/leds.h> -- --void ath79_register_leds_gpio(int id, -- unsigned num_leds, -- struct gpio_led *leds); -- --#endif /* _ATH79_DEV_LEDS_GPIO_H */ ---- a/arch/mips/ath79/dev-spi.c -+++ /dev/null -@@ -1,38 +0,0 @@ --/* -- * Atheros AR71XX/AR724X/AR913X SPI controller device -- * -- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> -- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -- * -- * This program is free software; you can redistribute it and/or modify it -- * under the terms of the GNU General Public License version 2 as published -- * by the Free Software Foundation. -- */ -- --#include <linux/platform_device.h> --#include <asm/mach-ath79/ar71xx_regs.h> --#include "dev-spi.h" -- --static struct resource ath79_spi_resources[] = { -- { -- .start = AR71XX_SPI_BASE, -- .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, -- .flags = IORESOURCE_MEM, -- }, --}; -- --static struct platform_device ath79_spi_device = { -- .name = "ath79-spi", -- .id = -1, -- .resource = ath79_spi_resources, -- .num_resources = ARRAY_SIZE(ath79_spi_resources), --}; -- --void __init ath79_register_spi(struct ath79_spi_platform_data *pdata, -- struct spi_board_info const *info, -- unsigned n) --{ -- spi_register_board_info(info, n); -- ath79_spi_device.dev.platform_data = pdata; -- platform_device_register(&ath79_spi_device); --} ---- a/arch/mips/ath79/dev-spi.h -+++ /dev/null -@@ -1,22 +0,0 @@ --/* -- * Atheros AR71XX/AR724X/AR913X SPI controller device -- * -- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> -- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -- * -- * This program is free software; you can redistribute it and/or modify it -- * under the terms of the GNU General Public License version 2 as published -- * by the Free Software Foundation. -- */ -- --#ifndef _ATH79_DEV_SPI_H --#define _ATH79_DEV_SPI_H -- --#include <linux/spi/spi.h> --#include <asm/mach-ath79/ath79_spi_platform.h> -- --void ath79_register_spi(struct ath79_spi_platform_data *pdata, -- struct spi_board_info const *info, -- unsigned n); -- --#endif /* _ATH79_DEV_SPI_H */ ---- a/arch/mips/ath79/dev-usb.c -+++ /dev/null -@@ -1,242 +0,0 @@ --/* -- * Atheros AR7XXX/AR9XXX USB Host Controller device -- * -- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> -- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -- * -- * Parts of this file are based on Atheros' 2.6.15 BSP -- * -- * This program is free software; you can redistribute it and/or modify it -- * under the terms of the GNU General Public License version 2 as published -- * by the Free Software Foundation. -- */ -- --#include <linux/kernel.h> --#include <linux/init.h> --#include <linux/delay.h> --#include <linux/irq.h> --#include <linux/dma-mapping.h> --#include <linux/platform_device.h> --#include <linux/usb/ehci_pdriver.h> --#include <linux/usb/ohci_pdriver.h> -- --#include <asm/mach-ath79/ath79.h> --#include <asm/mach-ath79/ar71xx_regs.h> --#include "common.h" --#include "dev-usb.h" -- --static u64 ath79_usb_dmamask = DMA_BIT_MASK(32); -- --static struct usb_ohci_pdata ath79_ohci_pdata = { --}; -- --static struct usb_ehci_pdata ath79_ehci_pdata_v1 = { -- .has_synopsys_hc_bug = 1, --}; -- --static struct usb_ehci_pdata ath79_ehci_pdata_v2 = { -- .caps_offset = 0x100, -- .has_tt = 1, --}; -- --static void __init ath79_usb_register(const char *name, int id, -- unsigned long base, unsigned long size, -- int irq, const void *data, -- size_t data_size) --{ -- struct resource res[2]; -- struct platform_device *pdev; -- -- memset(res, 0, sizeof(res)); -- -- res[0].flags = IORESOURCE_MEM; -- res[0].start = base; -- res[0].end = base + size - 1; -- -- res[1].flags = IORESOURCE_IRQ; -- res[1].start = irq; -- res[1].end = irq; -- -- pdev = platform_device_register_resndata(NULL, name, id, -- res, ARRAY_SIZE(res), -- data, data_size); -- -- if (IS_ERR(pdev)) { -- pr_err("ath79: unable to register USB at %08lx, err=%d\n", -- base, (int) PTR_ERR(pdev)); -- return; -- } -- -- pdev->dev.dma_mask = &ath79_usb_dmamask; -- pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); --} -- --#define AR71XX_USB_RESET_MASK (AR71XX_RESET_USB_HOST | \ -- AR71XX_RESET_USB_PHY | \ -- AR71XX_RESET_USB_OHCI_DLL) -- --static void __init ath79_usb_setup(void) --{ -- void __iomem *usb_ctrl_base; -- -- ath79_device_reset_set(AR71XX_USB_RESET_MASK); -- mdelay(1000); -- ath79_device_reset_clear(AR71XX_USB_RESET_MASK); -- -- usb_ctrl_base = ioremap(AR71XX_USB_CTRL_BASE, AR71XX_USB_CTRL_SIZE); -- -- /* Turning on the Buff and Desc swap bits */ -- __raw_writel(0xf0000, usb_ctrl_base + AR71XX_USB_CTRL_REG_CONFIG); -- -- /* WAR for HW bug. Here it adjusts the duration between two SOFS */ -- __raw_writel(0x20c00, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ); -- -- iounmap(usb_ctrl_base); -- -- mdelay(900); -- -- ath79_usb_register("ohci-platform", -1, -- AR71XX_OHCI_BASE, AR71XX_OHCI_SIZE, -- ATH79_MISC_IRQ(6), -- &ath79_ohci_pdata, sizeof(ath79_ohci_pdata)); -- -- ath79_usb_register("ehci-platform", -1, -- AR71XX_EHCI_BASE, AR71XX_EHCI_SIZE, -- ATH79_CPU_IRQ(3), -- &ath79_ehci_pdata_v1, sizeof(ath79_ehci_pdata_v1)); --} -- --static void __init ar7240_usb_setup(void) --{ -- void __iomem *usb_ctrl_base; -- -- ath79_device_reset_clear(AR7240_RESET_OHCI_DLL); -- ath79_device_reset_set(AR7240_RESET_USB_HOST); -- -- mdelay(1000); -- -- ath79_device_reset_set(AR7240_RESET_OHCI_DLL); -- ath79_device_reset_clear(AR7240_RESET_USB_HOST); -- -- usb_ctrl_base = ioremap(AR7240_USB_CTRL_BASE, AR7240_USB_CTRL_SIZE); -- -- /* WAR for HW bug. Here it adjusts the duration between two SOFS */ -- __raw_writel(0x3, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ); -- -- iounmap(usb_ctrl_base); -- -- ath79_usb_register("ohci-platform", -1, -- AR7240_OHCI_BASE, AR7240_OHCI_SIZE, -- ATH79_CPU_IRQ(3), -- &ath79_ohci_pdata, sizeof(ath79_ohci_pdata)); --} -- --static void __init ar724x_usb_setup(void) --{ -- ath79_device_reset_set(AR724X_RESET_USBSUS_OVERRIDE); -- mdelay(10); -- -- ath79_device_reset_clear(AR724X_RESET_USB_HOST); -- mdelay(10); -- -- ath79_device_reset_clear(AR724X_RESET_USB_PHY); -- mdelay(10); -- -- ath79_usb_register("ehci-platform", -1, -- AR724X_EHCI_BASE, AR724X_EHCI_SIZE, -- ATH79_CPU_IRQ(3), -- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); --} -- --static void __init ar913x_usb_setup(void) --{ -- ath79_device_reset_set(AR913X_RESET_USBSUS_OVERRIDE); -- mdelay(10); -- -- ath79_device_reset_clear(AR913X_RESET_USB_HOST); -- mdelay(10); -- -- ath79_device_reset_clear(AR913X_RESET_USB_PHY); -- mdelay(10); -- -- ath79_usb_register("ehci-platform", -1, -- AR913X_EHCI_BASE, AR913X_EHCI_SIZE, -- ATH79_CPU_IRQ(3), -- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); --} -- --static void __init ar933x_usb_setup(void) --{ -- ath79_device_reset_set(AR933X_RESET_USBSUS_OVERRIDE); -- mdelay(10); -- -- ath79_device_reset_clear(AR933X_RESET_USB_HOST); -- mdelay(10); -- -- ath79_device_reset_clear(AR933X_RESET_USB_PHY); -- mdelay(10); -- -- ath79_usb_register("ehci-platform", -1, -- AR933X_EHCI_BASE, AR933X_EHCI_SIZE, -- ATH79_CPU_IRQ(3), -- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); --} -- --static void __init ar934x_usb_setup(void) --{ -- u32 bootstrap; -- -- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); -- if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE) -- return; -- -- ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE); -- udelay(1000); -- -- ath79_device_reset_clear(AR934X_RESET_USB_PHY); -- udelay(1000); -- -- ath79_device_reset_clear(AR934X_RESET_USB_PHY_ANALOG); -- udelay(1000); -- -- ath79_device_reset_clear(AR934X_RESET_USB_HOST); -- udelay(1000); -- -- ath79_usb_register("ehci-platform", -1, -- AR934X_EHCI_BASE, AR934X_EHCI_SIZE, -- ATH79_CPU_IRQ(3), -- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); --} -- --static void __init qca955x_usb_setup(void) --{ -- ath79_usb_register("ehci-platform", 0, -- QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE, -- ATH79_IP3_IRQ(0), -- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); -- -- ath79_usb_register("ehci-platform", 1, -- QCA955X_EHCI1_BASE, QCA955X_EHCI_SIZE, -- ATH79_IP3_IRQ(1), -- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); --} -- --void __init ath79_register_usb(void) --{ -- if (soc_is_ar71xx()) -- ath79_usb_setup(); -- else if (soc_is_ar7240()) -- ar7240_usb_setup(); -- else if (soc_is_ar7241() || soc_is_ar7242()) -- ar724x_usb_setup(); -- else if (soc_is_ar913x()) -- ar913x_usb_setup(); -- else if (soc_is_ar933x()) -- ar933x_usb_setup(); -- else if (soc_is_ar934x()) -- ar934x_usb_setup(); -- else if (soc_is_qca955x()) -- qca955x_usb_setup(); -- else -- BUG(); --} ---- a/arch/mips/ath79/dev-usb.h -+++ /dev/null -@@ -1,17 +0,0 @@ --/* -- * Atheros AR71XX/AR724X/AR913X USB Host Controller support -- * -- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> -- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -- * -- * This program is free software; you can redistribute it and/or modify it -- * under the terms of the GNU General Public License version 2 as published -- * by the Free Software Foundation. -- */ -- --#ifndef _ATH79_DEV_USB_H --#define _ATH79_DEV_USB_H -- --void ath79_register_usb(void); -- --#endif /* _ATH79_DEV_USB_H */ ---- a/arch/mips/ath79/dev-wmac.c -+++ /dev/null -@@ -1,155 +0,0 @@ --/* -- * Atheros AR913X/AR933X SoC built-in WMAC device support -- * -- * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> -- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> -- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -- * -- * Parts of this file are based on Atheros 2.6.15/2.6.31 BSP -- * -- * This program is free software; you can redistribute it and/or modify it -- * under the terms of the GNU General Public License version 2 as published -- * by the Free Software Foundation. -- */ -- --#include <linux/init.h> --#include <linux/delay.h> --#include <linux/irq.h> --#include <linux/platform_device.h> --#include <linux/ath9k_platform.h> -- --#include <asm/mach-ath79/ath79.h> --#include <asm/mach-ath79/ar71xx_regs.h> --#include "dev-wmac.h" -- --static struct ath9k_platform_data ath79_wmac_data; -- --static struct resource ath79_wmac_resources[] = { -- { -- /* .start and .end fields are filled dynamically */ -- .flags = IORESOURCE_MEM, -- }, { -- /* .start and .end fields are filled dynamically */ -- .flags = IORESOURCE_IRQ, -- }, --}; -- --static struct platform_device ath79_wmac_device = { -- .name = "ath9k", -- .id = -1, -- .resource = ath79_wmac_resources, -- .num_resources = ARRAY_SIZE(ath79_wmac_resources), -- .dev = { -- .platform_data = &ath79_wmac_data, -- }, --}; -- --static void __init ar913x_wmac_setup(void) --{ -- /* reset the WMAC */ -- ath79_device_reset_set(AR913X_RESET_AMBA2WMAC); -- mdelay(10); -- -- ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC); -- mdelay(10); -- -- ath79_wmac_resources[0].start = AR913X_WMAC_BASE; -- ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1; -- ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2); -- ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2); --} -- -- --static int ar933x_wmac_reset(void) --{ -- ath79_device_reset_set(AR933X_RESET_WMAC); -- ath79_device_reset_clear(AR933X_RESET_WMAC); -- -- return 0; --} -- --static int ar933x_r1_get_wmac_revision(void) --{ -- return ath79_soc_rev; --} -- --static void __init ar933x_wmac_setup(void) --{ -- u32 t; -- -- ar933x_wmac_reset(); -- -- ath79_wmac_device.name = "ar933x_wmac"; -- -- ath79_wmac_resources[0].start = AR933X_WMAC_BASE; -- ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1; -- ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2); -- ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2); -- -- t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); -- if (t & AR933X_BOOTSTRAP_REF_CLK_40) -- ath79_wmac_data.is_clk_25mhz = false; -- else -- ath79_wmac_data.is_clk_25mhz = true; -- -- if (ath79_soc_rev == 1) -- ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision; -- -- ath79_wmac_data.external_reset = ar933x_wmac_reset; --} -- --static void ar934x_wmac_setup(void) --{ -- u32 t; -- -- ath79_wmac_device.name = "ar934x_wmac"; -- -- ath79_wmac_resources[0].start = AR934X_WMAC_BASE; -- ath79_wmac_resources[0].end = AR934X_WMAC_BASE + AR934X_WMAC_SIZE - 1; -- ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1); -- ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1); -- -- t = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); -- if (t & AR934X_BOOTSTRAP_REF_CLK_40) -- ath79_wmac_data.is_clk_25mhz = false; -- else -- ath79_wmac_data.is_clk_25mhz = true; --} -- --static void qca955x_wmac_setup(void) --{ -- u32 t; -- -- ath79_wmac_device.name = "qca955x_wmac"; -- -- ath79_wmac_resources[0].start = QCA955X_WMAC_BASE; -- ath79_wmac_resources[0].end = QCA955X_WMAC_BASE + QCA955X_WMAC_SIZE - 1; -- ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1); -- ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1); -- -- t = ath79_reset_rr(QCA955X_RESET_REG_BOOTSTRAP); -- if (t & QCA955X_BOOTSTRAP_REF_CLK_40) -- ath79_wmac_data.is_clk_25mhz = false; -- else -- ath79_wmac_data.is_clk_25mhz = true; --} -- --void __init ath79_register_wmac(u8 *cal_data) --{ -- if (soc_is_ar913x()) -- ar913x_wmac_setup(); -- else if (soc_is_ar933x()) -- ar933x_wmac_setup(); -- else if (soc_is_ar934x()) -- ar934x_wmac_setup(); -- else if (soc_is_qca955x()) -- qca955x_wmac_setup(); -- else -- BUG(); -- -- if (cal_data) -- memcpy(ath79_wmac_data.eeprom_data, cal_data, -- sizeof(ath79_wmac_data.eeprom_data)); -- -- platform_device_register(&ath79_wmac_device); --} ---- a/arch/mips/ath79/dev-wmac.h -+++ /dev/null -@@ -1,17 +0,0 @@ --/* -- * Atheros AR913X/AR933X SoC built-in WMAC device support -- * -- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> -- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -- * -- * This program is free software; you can redistribute it and/or modify it -- * under the terms of the GNU General Public License version 2 as published -- * by the Free Software Foundation. -- */ -- --#ifndef _ATH79_DEV_WMAC_H --#define _ATH79_DEV_WMAC_H -- --void ath79_register_wmac(u8 *cal_data); -- --#endif /* _ATH79_DEV_WMAC_H */ ---- a/arch/mips/ath79/setup.c -+++ b/arch/mips/ath79/setup.c -@@ -31,7 +31,6 @@ - #include <asm/mach-ath79/ath79.h> - #include <asm/mach-ath79/ar71xx_regs.h> - #include "common.h" --#include "dev-common.h" - #include "machtypes.h" - - #define ATH79_SYS_TYPE_LEN 64 -@@ -316,10 +315,6 @@ static int __init ath79_setup(void) - if (mips_machtype == ATH79_MACH_GENERIC_OF) - return 0; - -- ath79_gpio_init(); -- ath79_register_uart(); -- ath79_register_wdt(); -- - mips_machine_setup(); - - return 0; diff --git a/target/linux/ath79/patches-4.14/0025-MIPS-ath79-drop-irq.c.patch b/target/linux/ath79/patches-4.14/0025-MIPS-ath79-drop-irq.c.patch deleted file mode 100644 index 95b2945..0000000 --- a/target/linux/ath79/patches-4.14/0025-MIPS-ath79-drop-irq.c.patch +++ /dev/null @@ -1,336 +0,0 @@ -From 08b9cad7da5d981d595fe6d76e9675f85e23e688 Mon Sep 17 00:00:00 2001 -From: John Crispin <john@phrozen.org> -Date: Tue, 6 Mar 2018 09:57:15 +0100 -Subject: [PATCH 25/27] MIPS: ath79: drop irq.c - -all IRQ init code will flow via OF based irq chips. - -Signed-off-by: John Crispin <john@phrozen.org> ---- - arch/mips/ath79/Makefile | 2 +- - arch/mips/ath79/irq.c | 285 ----------------------------------------------- - arch/mips/ath79/setup.c | 6 + - 3 files changed, 7 insertions(+), 286 deletions(-) - delete mode 100644 arch/mips/ath79/irq.c - ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -8,7 +8,7 @@ - # under the terms of the GNU General Public License version 2 as published - # by the Free Software Foundation. - --obj-y := prom.o setup.o irq.o common.o clock.o -+obj-y := prom.o setup.o common.o clock.o - - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - ---- a/arch/mips/ath79/irq.c -+++ /dev/null -@@ -1,285 +0,0 @@ --/* -- * Atheros AR71xx/AR724x/AR913x specific interrupt handling -- * -- * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> -- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> -- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -- * -- * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP -- * -- * This program is free software; you can redistribute it and/or modify it -- * under the terms of the GNU General Public License version 2 as published -- * by the Free Software Foundation. -- */ -- --#include <linux/kernel.h> --#include <linux/init.h> --#include <linux/interrupt.h> --#include <linux/irqchip.h> --#include <linux/of_irq.h> -- --#include <asm/irq_cpu.h> --#include <asm/mipsregs.h> -- --#include <asm/mach-ath79/ath79.h> --#include <asm/mach-ath79/ar71xx_regs.h> --#include "common.h" --#include "machtypes.h" -- -- --static void ar934x_ip2_irq_dispatch(struct irq_desc *desc) --{ -- u32 status; -- -- status = ath79_reset_rr(AR934X_RESET_REG_PCIE_WMAC_INT_STATUS); -- -- if (status & AR934X_PCIE_WMAC_INT_PCIE_ALL) { -- ath79_ddr_wb_flush(3); -- generic_handle_irq(ATH79_IP2_IRQ(0)); -- } else if (status & AR934X_PCIE_WMAC_INT_WMAC_ALL) { -- ath79_ddr_wb_flush(4); -- generic_handle_irq(ATH79_IP2_IRQ(1)); -- } else { -- spurious_interrupt(); -- } --} -- --static void ar934x_ip2_irq_init(void) --{ -- int i; -- -- for (i = ATH79_IP2_IRQ_BASE; -- i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) -- irq_set_chip_and_handler(i, &dummy_irq_chip, -- handle_level_irq); -- -- irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch); --} -- --static void qca953x_ip2_irq_dispatch(struct irq_desc *desc) --{ -- u32 status; -- -- status = ath79_reset_rr(QCA953X_RESET_REG_PCIE_WMAC_INT_STATUS); -- -- if (status & QCA953X_PCIE_WMAC_INT_PCIE_ALL) { -- ath79_ddr_wb_flush(3); -- generic_handle_irq(ATH79_IP2_IRQ(0)); -- } else if (status & QCA953X_PCIE_WMAC_INT_WMAC_ALL) { -- ath79_ddr_wb_flush(4); -- generic_handle_irq(ATH79_IP2_IRQ(1)); -- } else { -- spurious_interrupt(); -- } --} -- --static void qca953x_irq_init(void) --{ -- int i; -- -- for (i = ATH79_IP2_IRQ_BASE; -- i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) -- irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq); -- -- irq_set_chained_handler(ATH79_CPU_IRQ(2), qca953x_ip2_irq_dispatch); --} -- --static void qca955x_ip2_irq_dispatch(struct irq_desc *desc) --{ -- u32 status; -- -- status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS); -- status &= QCA955X_EXT_INT_PCIE_RC1_ALL | QCA955X_EXT_INT_WMAC_ALL; -- -- if (status == 0) { -- spurious_interrupt(); -- return; -- } -- -- if (status & QCA955X_EXT_INT_PCIE_RC1_ALL) { -- /* TODO: flush DDR? */ -- generic_handle_irq(ATH79_IP2_IRQ(0)); -- } -- -- if (status & QCA955X_EXT_INT_WMAC_ALL) { -- /* TODO: flush DDR? */ -- generic_handle_irq(ATH79_IP2_IRQ(1)); -- } --} -- --static void qca955x_ip3_irq_dispatch(struct irq_desc *desc) --{ -- u32 status; -- -- status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS); -- status &= QCA955X_EXT_INT_PCIE_RC2_ALL | -- QCA955X_EXT_INT_USB1 | -- QCA955X_EXT_INT_USB2; -- -- if (status == 0) { -- spurious_interrupt(); -- return; -- } -- -- if (status & QCA955X_EXT_INT_USB1) { -- /* TODO: flush DDR? */ -- generic_handle_irq(ATH79_IP3_IRQ(0)); -- } -- -- if (status & QCA955X_EXT_INT_USB2) { -- /* TODO: flush DDR? */ -- generic_handle_irq(ATH79_IP3_IRQ(1)); -- } -- -- if (status & QCA955X_EXT_INT_PCIE_RC2_ALL) { -- /* TODO: flush DDR? */ -- generic_handle_irq(ATH79_IP3_IRQ(2)); -- } --} -- --static void qca955x_irq_init(void) --{ -- int i; -- -- for (i = ATH79_IP2_IRQ_BASE; -- i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) -- irq_set_chip_and_handler(i, &dummy_irq_chip, -- handle_level_irq); -- -- irq_set_chained_handler(ATH79_CPU_IRQ(2), qca955x_ip2_irq_dispatch); -- -- for (i = ATH79_IP3_IRQ_BASE; -- i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++) -- irq_set_chip_and_handler(i, &dummy_irq_chip, -- handle_level_irq); -- -- irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch); --} -- --static void qca956x_ip2_irq_dispatch(struct irq_desc *desc) --{ -- u32 status; -- -- status = ath79_reset_rr(QCA956X_RESET_REG_EXT_INT_STATUS); -- status &= QCA956X_EXT_INT_PCIE_RC1_ALL | QCA956X_EXT_INT_WMAC_ALL; -- -- if (status == 0) { -- spurious_interrupt(); -- return; -- } -- -- if (status & QCA956X_EXT_INT_PCIE_RC1_ALL) { -- /* TODO: flush DDR? */ -- generic_handle_irq(ATH79_IP2_IRQ(0)); -- } -- -- if (status & QCA956X_EXT_INT_WMAC_ALL) { -- /* TODO: flsuh DDR? */ -- generic_handle_irq(ATH79_IP2_IRQ(1)); -- } --} -- --static void qca956x_ip3_irq_dispatch(struct irq_desc *desc) --{ -- u32 status; -- -- status = ath79_reset_rr(QCA956X_RESET_REG_EXT_INT_STATUS); -- status &= QCA956X_EXT_INT_PCIE_RC2_ALL | -- QCA956X_EXT_INT_USB1 | QCA956X_EXT_INT_USB2; -- -- if (status == 0) { -- spurious_interrupt(); -- return; -- } -- -- if (status & QCA956X_EXT_INT_USB1) { -- /* TODO: flush DDR? */ -- generic_handle_irq(ATH79_IP3_IRQ(0)); -- } -- -- if (status & QCA956X_EXT_INT_USB2) { -- /* TODO: flush DDR? */ -- generic_handle_irq(ATH79_IP3_IRQ(1)); -- } -- -- if (status & QCA956X_EXT_INT_PCIE_RC2_ALL) { -- /* TODO: flush DDR? */ -- generic_handle_irq(ATH79_IP3_IRQ(2)); -- } --} -- --static void qca956x_enable_timer_cb(void) { -- u32 misc; -- -- misc = ath79_reset_rr(AR71XX_RESET_REG_MISC_INT_ENABLE); -- misc |= MISC_INT_MIPS_SI_TIMERINT_MASK; -- ath79_reset_wr(AR71XX_RESET_REG_MISC_INT_ENABLE, misc); --} -- --static void qca956x_irq_init(void) --{ -- int i; -- -- for (i = ATH79_IP2_IRQ_BASE; -- i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) -- irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq); -- -- irq_set_chained_handler(ATH79_CPU_IRQ(2), qca956x_ip2_irq_dispatch); -- -- for (i = ATH79_IP3_IRQ_BASE; -- i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++) -- irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq); -- -- irq_set_chained_handler(ATH79_CPU_IRQ(3), qca956x_ip3_irq_dispatch); -- -- /* QCA956x timer init workaround has to be applied right before setting -- * up the clock. Else, there will be no jiffies */ -- late_time_init = &qca956x_enable_timer_cb; --} -- --void __init arch_init_irq(void) --{ -- unsigned irq_wb_chan2 = -1; -- unsigned irq_wb_chan3 = -1; -- bool misc_is_ar71xx; -- -- if (mips_machtype == ATH79_MACH_GENERIC_OF) { -- irqchip_init(); -- return; -- } -- -- if (soc_is_ar71xx() || soc_is_ar724x() || -- soc_is_ar913x() || soc_is_ar933x()) { -- irq_wb_chan2 = 3; -- irq_wb_chan3 = 2; -- } else if (soc_is_ar934x() || soc_is_qca953x()) { -- irq_wb_chan3 = 2; -- } -- -- ath79_cpu_irq_init(irq_wb_chan2, irq_wb_chan3); -- -- if (soc_is_ar71xx() || soc_is_ar913x()) -- misc_is_ar71xx = true; -- else if (soc_is_ar724x() || -- soc_is_ar933x() || -- soc_is_ar934x() || -- soc_is_qca953x() || -- soc_is_qca955x() || -- soc_is_qca956x() || -- soc_is_tp9343()) -- misc_is_ar71xx = false; -- else -- BUG(); -- ath79_misc_irq_init( -- ath79_reset_base + AR71XX_RESET_REG_MISC_INT_STATUS, -- ATH79_CPU_IRQ(6), ATH79_MISC_IRQ_BASE, misc_is_ar71xx); -- -- if (soc_is_ar934x()) -- ar934x_ip2_irq_init(); -- else if (soc_is_qca953x()) -- qca953x_irq_init(); -- else if (soc_is_qca955x()) -- qca955x_irq_init(); -- else if (soc_is_qca956x() || soc_is_tp9343()) -- qca956x_irq_init(); --} ---- a/arch/mips/ath79/setup.c -+++ b/arch/mips/ath79/setup.c -@@ -19,6 +19,7 @@ - #include <linux/clk.h> - #include <linux/clk-provider.h> - #include <linux/of_fdt.h> -+#include <linux/irqchip.h> - - #include <asm/bootinfo.h> - #include <asm/idle.h> -@@ -310,6 +311,11 @@ void __init plat_time_init(void) - mips_hpt_frequency = cpu_clk_rate / 2; - } - -+void __init arch_init_irq(void) -+{ -+ irqchip_init(); -+} -+ - static int __init ath79_setup(void) - { - if (mips_machtype == ATH79_MACH_GENERIC_OF) diff --git a/target/linux/ath79/patches-4.14/0026-MIPS-ath79-sanitize-Kconfig-symbols.patch b/target/linux/ath79/patches-4.14/0026-MIPS-ath79-sanitize-Kconfig-symbols.patch deleted file mode 100644 index f990651..0000000 --- a/target/linux/ath79/patches-4.14/0026-MIPS-ath79-sanitize-Kconfig-symbols.patch +++ /dev/null @@ -1,111 +0,0 @@ -From deda44895d289a72a235359fc21f8a62ea44dc1c Mon Sep 17 00:00:00 2001 -From: John Crispin <john@phrozen.org> -Date: Tue, 6 Mar 2018 09:33:26 +0100 -Subject: [PATCH 26/27] MIPS: ath79: sanitize Kconfig symbols - -Signed-off-by: John Crispin <john@phrozen.org> ---- - arch/mips/Kconfig | 2 ++ - arch/mips/ath79/Kconfig | 48 +++++------------------------------------------- - arch/mips/ath79/Makefile | 10 ---------- - arch/mips/pci/Makefile | 2 +- - 4 files changed, 8 insertions(+), 54 deletions(-) - ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -203,6 +203,8 @@ config ATH79 - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_MIPS16 - select SYS_SUPPORTS_ZBOOT_UART_PROM -+ select HW_HAS_PCI -+ select USB_ARCH_HAS_EHCI - select USE_OF - help - Support for the Atheros AR71XX/AR724X/AR913X SoCs. ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -1,52 +1,14 @@ - # SPDX-License-Identifier: GPL-2.0 - if ATH79 - --config SOC_AR71XX -- select HW_HAS_PCI -- def_bool n -- --config SOC_AR724X -- select HW_HAS_PCI -- select PCI_AR724X if PCI -- def_bool n -- --config SOC_AR913X -- def_bool n -- --config SOC_AR933X -- def_bool n -- --config SOC_AR934X -- select HW_HAS_PCI -- select PCI_AR724X if PCI -- def_bool n -- --config SOC_QCA953X -- select USB_ARCH_HAS_EHCI -- def_bool n -- --config SOC_QCA955X -- select HW_HAS_PCI -- select PCI_AR724X if PCI -+config PCI_AR71XX -+ bool "PCI support for AR7100 type SoCs" -+ depends on PCI - def_bool n - - config PCI_AR724X -- def_bool n -- --config ATH79_DEV_GPIO_BUTTONS -- def_bool n -- --config ATH79_DEV_LEDS_GPIO -- def_bool n -- --config ATH79_DEV_SPI -- def_bool n -- --config ATH79_DEV_USB -- def_bool n -- --config ATH79_DEV_WMAC -- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X || SOC_QCA956X) -+ bool "PCI support for AR724x type SoCs" -+ depends on PCI - def_bool n - - endif ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -11,13 +11,3 @@ - obj-y := prom.o setup.o common.o clock.o - - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -- --# --# Devices --# --obj-y += dev-common.o --obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o --obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o --obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o --obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o --obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o ---- a/arch/mips/pci/Makefile -+++ b/arch/mips/pci/Makefile -@@ -23,7 +23,7 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o - ops-bcm63xx.o - obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o - obj-$(CONFIG_PCI_AR2315) += pci-ar2315.o --obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o -+obj-$(CONFIG_PCI_AR71XX) += pci-ar71xx.o - obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o - obj-$(CONFIG_MIPS_PCI_VIRTIO) += pci-virtio-guest.o - # diff --git a/target/linux/ath79/patches-4.14/0027-MIPS-ath79-drop-mips_machine-support.patch b/target/linux/ath79/patches-4.14/0027-MIPS-ath79-drop-mips_machine-support.patch deleted file mode 100644 index cde3bae..0000000 --- a/target/linux/ath79/patches-4.14/0027-MIPS-ath79-drop-mips_machine-support.patch +++ /dev/null @@ -1,172 +0,0 @@ -From e03edbc8e68063b3fca7457fa048d8abe0045f1f Mon Sep 17 00:00:00 2001 -From: John Crispin <john@phrozen.org> -Date: Tue, 6 Mar 2018 10:15:54 +0100 -Subject: [PATCH 27/27] MIPS: ath79: drop mips_machine support - -Signed-off-by: John Crispin <john@phrozen.org> ---- - arch/mips/Kconfig | 1 - - arch/mips/ath79/machtypes.h | 28 ----------------- - arch/mips/ath79/setup.c | 74 ++++++--------------------------------------- - 3 files changed, 10 insertions(+), 93 deletions(-) - delete mode 100644 arch/mips/ath79/machtypes.h - ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -196,7 +196,6 @@ config ATH79 - select COMMON_CLK - select CLKDEV_LOOKUP - select IRQ_MIPS_CPU -- select MIPS_MACHINE - select SYS_HAS_CPU_MIPS32_R2 - select SYS_HAS_EARLY_PRINTK - select SYS_SUPPORTS_32BIT_KERNEL ---- a/arch/mips/ath79/machtypes.h -+++ /dev/null -@@ -1,28 +0,0 @@ --/* -- * Atheros AR71XX/AR724X/AR913X machine type definitions -- * -- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> -- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -- * -- * This program is free software; you can redistribute it and/or modify it -- * under the terms of the GNU General Public License version 2 as published -- * by the Free Software Foundation. -- */ -- --#ifndef _ATH79_MACHTYPE_H --#define _ATH79_MACHTYPE_H -- --#include <asm/mips_machine.h> -- --enum ath79_mach_type { -- ATH79_MACH_GENERIC_OF = -1, /* Device tree board */ -- ATH79_MACH_GENERIC = 0, -- ATH79_MACH_AP121, /* Atheros AP121 reference board */ -- ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */ -- ATH79_MACH_AP81, /* Atheros AP81 reference board */ -- ATH79_MACH_DB120, /* Atheros DB120 reference board */ -- ATH79_MACH_PB44, /* Atheros PB44 reference board */ -- ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */ --}; -- --#endif /* _ATH79_MACHTYPE_H */ ---- a/arch/mips/ath79/setup.c -+++ b/arch/mips/ath79/setup.c -@@ -32,7 +32,6 @@ - #include <asm/mach-ath79/ath79.h> - #include <asm/mach-ath79/ar71xx_regs.h> - #include "common.h" --#include "machtypes.h" - - #define ATH79_SYS_TYPE_LEN 64 - -@@ -235,25 +234,21 @@ void __init plat_mem_setup(void) - else if (fw_passed_dtb) - __dt_setup_arch((void *)KSEG0ADDR(fw_passed_dtb)); - -- if (mips_machtype != ATH79_MACH_GENERIC_OF) { -- ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE, -- AR71XX_RESET_SIZE); -- ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE, -- AR71XX_PLL_SIZE); -- ath79_detect_sys_type(); -- ath79_ddr_ctrl_init(); -+ ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE, -+ AR71XX_RESET_SIZE); -+ ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE, -+ AR71XX_PLL_SIZE); -+ ath79_detect_sys_type(); -+ ath79_ddr_ctrl_init(); - -- detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX); -- -- /* OF machines should use the reset driver */ -- _machine_restart = ath79_restart; -- } -+ detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX); - -+ _machine_restart = ath79_restart; - _machine_halt = ath79_halt; - pm_power_off = ath79_halt; - } - --static void __init ath79_of_plat_time_init(void) -+void __init plat_time_init(void) - { - struct device_node *np; - struct clk *clk; -@@ -283,62 +278,12 @@ static void __init ath79_of_plat_time_in - clk_put(clk); - } - --void __init plat_time_init(void) --{ -- unsigned long cpu_clk_rate; -- unsigned long ahb_clk_rate; -- unsigned long ddr_clk_rate; -- unsigned long ref_clk_rate; -- -- if (IS_ENABLED(CONFIG_OF) && mips_machtype == ATH79_MACH_GENERIC_OF) { -- ath79_of_plat_time_init(); -- return; -- } -- -- ath79_clocks_init(); -- -- cpu_clk_rate = ath79_get_sys_clk_rate("cpu"); -- ahb_clk_rate = ath79_get_sys_clk_rate("ahb"); -- ddr_clk_rate = ath79_get_sys_clk_rate("ddr"); -- ref_clk_rate = ath79_get_sys_clk_rate("ref"); -- -- pr_info("Clocks: CPU:%lu.%03luMHz, DDR:%lu.%03luMHz, AHB:%lu.%03luMHz, Ref:%lu.%03luMHz\n", -- cpu_clk_rate / 1000000, (cpu_clk_rate / 1000) % 1000, -- ddr_clk_rate / 1000000, (ddr_clk_rate / 1000) % 1000, -- ahb_clk_rate / 1000000, (ahb_clk_rate / 1000) % 1000, -- ref_clk_rate / 1000000, (ref_clk_rate / 1000) % 1000); -- -- mips_hpt_frequency = cpu_clk_rate / 2; --} -- - void __init arch_init_irq(void) - { - irqchip_init(); - } - --static int __init ath79_setup(void) --{ -- if (mips_machtype == ATH79_MACH_GENERIC_OF) -- return 0; -- -- mips_machine_setup(); -- -- return 0; --} -- --arch_initcall(ath79_setup); -- - void __init device_tree_init(void) - { - unflatten_and_copy_device_tree(); - } -- --MIPS_MACHINE(ATH79_MACH_GENERIC, -- "Generic", -- "Generic AR71XX/AR724X/AR913X based board", -- NULL); -- --MIPS_MACHINE(ATH79_MACH_GENERIC_OF, -- "DTB", -- "Generic AR71XX/AR724X/AR913X based board (DT)", -- NULL); ---- a/arch/mips/ath79/clock.c -+++ b/arch/mips/ath79/clock.c -@@ -26,7 +26,6 @@ - #include <asm/mach-ath79/ath79.h> - #include <asm/mach-ath79/ar71xx_regs.h> - #include "common.h" --#include "machtypes.h" - - #define AR71XX_BASE_FREQ 40000000 - #define AR724X_BASE_FREQ 40000000 diff --git a/target/linux/ath79/patches-4.14/0028-MIPS-ath79-add-helpers-for-setting-clocks-and-expose.patch b/target/linux/ath79/patches-4.14/0028-MIPS-ath79-add-helpers-for-setting-clocks-and-expose.patch deleted file mode 100644 index 15f6b1f..0000000 --- a/target/linux/ath79/patches-4.14/0028-MIPS-ath79-add-helpers-for-setting-clocks-and-expose.patch +++ /dev/null @@ -1,238 +0,0 @@ -From: Felix Fietkau <nbd@nbd.name> -Date: Tue, 6 Mar 2018 13:19:26 +0100 -Subject: [PATCH] MIPS: ath79: add helpers for setting clocks and expose - the ref clock - -Preparation for transitioning legacy the legacy clock setup code over -to OF. - -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- - ---- a/arch/mips/ath79/clock.c -+++ b/arch/mips/ath79/clock.c -@@ -36,20 +36,46 @@ static struct clk_onecell_data clk_data - .clk_num = ARRAY_SIZE(clks), - }; - --static struct clk *__init ath79_add_sys_clkdev( -- const char *id, unsigned long rate) -+static const char * const clk_names[ATH79_CLK_END] = { -+ [ATH79_CLK_CPU] = "cpu", -+ [ATH79_CLK_DDR] = "ddr", -+ [ATH79_CLK_AHB] = "ahb", -+ [ATH79_CLK_REF] = "ref", -+}; -+ -+static const char * __init ath79_clk_name(int type) - { -- struct clk *clk; -- int err; -+ BUG_ON(type >= ARRAY_SIZE(clk_names) || !clk_names[type]); -+ return clk_names[type]; -+} - -- clk = clk_register_fixed_rate(NULL, id, NULL, 0, rate); -+static void __init __ath79_set_clk(int type, const char *name, struct clk *clk) -+{ - if (IS_ERR(clk)) -- panic("failed to allocate %s clock structure", id); -+ panic("failed to allocate %s clock structure", clk_names[type]); - -- err = clk_register_clkdev(clk, id, NULL); -- if (err) -- panic("unable to register %s clock device", id); -+ clks[type] = clk; -+ clk_register_clkdev(clk, name, NULL); -+} - -+static struct clk * __init ath79_set_clk(int type, unsigned long rate) -+{ -+ const char *name = ath79_clk_name(type); -+ struct clk *clk; -+ -+ clk = clk_register_fixed_rate(NULL, name, NULL, 0, rate); -+ __ath79_set_clk(type, name, clk); -+ return clk; -+} -+ -+static struct clk * __init ath79_set_ff_clk(int type, const char *parent, -+ unsigned int mult, unsigned int div) -+{ -+ const char *name = ath79_clk_name(type); -+ struct clk *clk; -+ -+ clk = clk_register_fixed_factor(NULL, name, parent, 0, mult, div); -+ __ath79_set_clk(type, name, clk); - return clk; - } - -@@ -79,27 +105,15 @@ static void __init ar71xx_clocks_init(vo - div = (((pll >> AR71XX_AHB_DIV_SHIFT) & AR71XX_AHB_DIV_MASK) + 1) * 2; - ahb_rate = cpu_rate / div; - -- ath79_add_sys_clkdev("ref", ref_rate); -- clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate); -- clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate); -- clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate); -+ ath79_set_clk(ATH79_CLK_REF, ref_rate); -+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate); -+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate); -+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate); - - clk_add_alias("wdt", NULL, "ahb", NULL); - clk_add_alias("uart", NULL, "ahb", NULL); - } - --static struct clk * __init ath79_reg_ffclk(const char *name, -- const char *parent_name, unsigned int mult, unsigned int div) --{ -- struct clk *clk; -- -- clk = clk_register_fixed_factor(NULL, name, parent_name, 0, mult, div); -- if (IS_ERR(clk)) -- panic("failed to allocate %s clock structure", name); -- -- return clk; --} -- - static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base) - { - u32 pll; -@@ -113,24 +127,19 @@ static void __init ar724x_clk_init(struc - ddr_div = ((pll >> AR724X_DDR_DIV_SHIFT) & AR724X_DDR_DIV_MASK) + 1; - ahb_div = (((pll >> AR724X_AHB_DIV_SHIFT) & AR724X_AHB_DIV_MASK) + 1) * 2; - -- clks[ATH79_CLK_CPU] = ath79_reg_ffclk("cpu", "ref", mult, div); -- clks[ATH79_CLK_DDR] = ath79_reg_ffclk("ddr", "ref", mult, div * ddr_div); -- clks[ATH79_CLK_AHB] = ath79_reg_ffclk("ahb", "ref", mult, div * ahb_div); -+ ath79_set_ff_clk(ATH79_CLK_CPU, "ref", mult, div); -+ ath79_set_ff_clk(ATH79_CLK_DDR, "ref", mult, div * ddr_div); -+ ath79_set_ff_clk(ATH79_CLK_AHB, "ref", mult, div * ahb_div); - } - - static void __init ar724x_clocks_init(void) - { - struct clk *ref_clk; - -- ref_clk = ath79_add_sys_clkdev("ref", AR724X_BASE_FREQ); -+ ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ); - - ar724x_clk_init(ref_clk, ath79_pll_base); - -- /* just make happy plat_time_init() from arch/mips/ath79/setup.c */ -- clk_register_clkdev(clks[ATH79_CLK_CPU], "cpu", NULL); -- clk_register_clkdev(clks[ATH79_CLK_DDR], "ddr", NULL); -- clk_register_clkdev(clks[ATH79_CLK_AHB], "ahb", NULL); -- - clk_add_alias("wdt", NULL, "ahb", NULL); - clk_add_alias("uart", NULL, "ahb", NULL); - } -@@ -185,12 +194,12 @@ static void __init ar9330_clk_init(struc - AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK) + 1; - } - -- clks[ATH79_CLK_CPU] = ath79_reg_ffclk("cpu", "ref", -- ninit_mul, ref_div * out_div * cpu_div); -- clks[ATH79_CLK_DDR] = ath79_reg_ffclk("ddr", "ref", -- ninit_mul, ref_div * out_div * ddr_div); -- clks[ATH79_CLK_AHB] = ath79_reg_ffclk("ahb", "ref", -- ninit_mul, ref_div * out_div * ahb_div); -+ ath79_set_ff_clk(ATH79_CLK_CPU, "ref", ninit_mul, -+ ref_div * out_div * cpu_div); -+ ath79_set_ff_clk(ATH79_CLK_DDR, "ref", ninit_mul, -+ ref_div * out_div * ddr_div); -+ ath79_set_ff_clk(ATH79_CLK_AHB, "ref", ninit_mul, -+ ref_div * out_div * ahb_div); - } - - static void __init ar933x_clocks_init(void) -@@ -205,15 +214,10 @@ static void __init ar933x_clocks_init(vo - else - ref_rate = (25 * 1000 * 1000); - -- ref_clk = ath79_add_sys_clkdev("ref", ref_rate); -+ ref_clk = ath79_set_clk(ATH79_CLK_REF, ref_rate); - - ar9330_clk_init(ref_clk, ath79_pll_base); - -- /* just make happy plat_time_init() from arch/mips/ath79/setup.c */ -- clk_register_clkdev(clks[ATH79_CLK_CPU], "cpu", NULL); -- clk_register_clkdev(clks[ATH79_CLK_DDR], "ddr", NULL); -- clk_register_clkdev(clks[ATH79_CLK_AHB], "ahb", NULL); -- - clk_add_alias("wdt", NULL, "ahb", NULL); - clk_add_alias("uart", NULL, "ref", NULL); - } -@@ -343,10 +347,10 @@ static void __init ar934x_clocks_init(vo - else - ahb_rate = cpu_pll / (postdiv + 1); - -- ath79_add_sys_clkdev("ref", ref_rate); -- clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate); -- clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate); -- clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate); -+ ath79_set_clk(ATH79_CLK_REF, ref_rate); -+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate); -+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate); -+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate); - - clk_add_alias("wdt", NULL, "ref", NULL); - clk_add_alias("uart", NULL, "ref", NULL); -@@ -430,10 +434,10 @@ static void __init qca953x_clocks_init(v - else - ahb_rate = cpu_pll / (postdiv + 1); - -- ath79_add_sys_clkdev("ref", ref_rate); -- ath79_add_sys_clkdev("cpu", cpu_rate); -- ath79_add_sys_clkdev("ddr", ddr_rate); -- ath79_add_sys_clkdev("ahb", ahb_rate); -+ ath79_set_clk(ATH79_CLK_REF, ref_rate); -+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate); -+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate); -+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate); - - clk_add_alias("wdt", NULL, "ref", NULL); - clk_add_alias("uart", NULL, "ref", NULL); -@@ -515,10 +519,10 @@ static void __init qca955x_clocks_init(v - else - ahb_rate = cpu_pll / (postdiv + 1); - -- ath79_add_sys_clkdev("ref", ref_rate); -- clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate); -- clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate); -- clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate); -+ ath79_set_clk(ATH79_CLK_REF, ref_rate); -+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate); -+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate); -+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate); - - clk_add_alias("wdt", NULL, "ref", NULL); - clk_add_alias("uart", NULL, "ref", NULL); -@@ -609,10 +613,10 @@ static void __init qca956x_clocks_init(v - else - ahb_rate = cpu_pll / (postdiv + 1); - -- ath79_add_sys_clkdev("ref", ref_rate); -- ath79_add_sys_clkdev("cpu", cpu_rate); -- ath79_add_sys_clkdev("ddr", ddr_rate); -- ath79_add_sys_clkdev("ahb", ahb_rate); -+ ath79_set_clk(ATH79_CLK_REF, ref_rate); -+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate); -+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate); -+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate); - - clk_add_alias("wdt", NULL, "ref", NULL); - clk_add_alias("uart", NULL, "ref", NULL); ---- a/include/dt-bindings/clock/ath79-clk.h -+++ b/include/dt-bindings/clock/ath79-clk.h -@@ -13,7 +13,8 @@ - #define ATH79_CLK_CPU 0 - #define ATH79_CLK_DDR 1 - #define ATH79_CLK_AHB 2 -+#define ATH79_CLK_REF 3 - --#define ATH79_CLK_END 3 -+#define ATH79_CLK_END 4 - - #endif /* __DT_BINDINGS_ATH79_CLK_H */ diff --git a/target/linux/ath79/patches-4.14/0029-MIPS-ath79-move-legacy-wdt-and-uart-clock-aliases-ou.patch b/target/linux/ath79/patches-4.14/0029-MIPS-ath79-move-legacy-wdt-and-uart-clock-aliases-ou.patch deleted file mode 100644 index 07e750a..0000000 --- a/target/linux/ath79/patches-4.14/0029-MIPS-ath79-move-legacy-wdt-and-uart-clock-aliases-ou.patch +++ /dev/null @@ -1,110 +0,0 @@ -From: Felix Fietkau <nbd@nbd.name> -Date: Tue, 6 Mar 2018 13:22:43 +0100 -Subject: [PATCH] MIPS: ath79: move legacy "wdt" and "uart" clock aliases - out of soc init - -Preparation for reusing functions for DT - -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- - ---- a/arch/mips/ath79/clock.c -+++ b/arch/mips/ath79/clock.c -@@ -109,9 +109,6 @@ static void __init ar71xx_clocks_init(vo - ath79_set_clk(ATH79_CLK_CPU, cpu_rate); - ath79_set_clk(ATH79_CLK_DDR, ddr_rate); - ath79_set_clk(ATH79_CLK_AHB, ahb_rate); -- -- clk_add_alias("wdt", NULL, "ahb", NULL); -- clk_add_alias("uart", NULL, "ahb", NULL); - } - - static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base) -@@ -139,9 +136,6 @@ static void __init ar724x_clocks_init(vo - ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ); - - ar724x_clk_init(ref_clk, ath79_pll_base); -- -- clk_add_alias("wdt", NULL, "ahb", NULL); -- clk_add_alias("uart", NULL, "ahb", NULL); - } - - static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base) -@@ -217,9 +211,6 @@ static void __init ar933x_clocks_init(vo - ref_clk = ath79_set_clk(ATH79_CLK_REF, ref_rate); - - ar9330_clk_init(ref_clk, ath79_pll_base); -- -- clk_add_alias("wdt", NULL, "ahb", NULL); -- clk_add_alias("uart", NULL, "ref", NULL); - } - - static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac, -@@ -352,9 +343,6 @@ static void __init ar934x_clocks_init(vo - ath79_set_clk(ATH79_CLK_DDR, ddr_rate); - ath79_set_clk(ATH79_CLK_AHB, ahb_rate); - -- clk_add_alias("wdt", NULL, "ref", NULL); -- clk_add_alias("uart", NULL, "ref", NULL); -- - iounmap(dpll_base); - } - -@@ -438,9 +426,6 @@ static void __init qca953x_clocks_init(v - ath79_set_clk(ATH79_CLK_CPU, cpu_rate); - ath79_set_clk(ATH79_CLK_DDR, ddr_rate); - ath79_set_clk(ATH79_CLK_AHB, ahb_rate); -- -- clk_add_alias("wdt", NULL, "ref", NULL); -- clk_add_alias("uart", NULL, "ref", NULL); - } - - static void __init qca955x_clocks_init(void) -@@ -523,9 +508,6 @@ static void __init qca955x_clocks_init(v - ath79_set_clk(ATH79_CLK_CPU, cpu_rate); - ath79_set_clk(ATH79_CLK_DDR, ddr_rate); - ath79_set_clk(ATH79_CLK_AHB, ahb_rate); -- -- clk_add_alias("wdt", NULL, "ref", NULL); -- clk_add_alias("uart", NULL, "ref", NULL); - } - - static void __init qca956x_clocks_init(void) -@@ -617,13 +599,13 @@ static void __init qca956x_clocks_init(v - ath79_set_clk(ATH79_CLK_CPU, cpu_rate); - ath79_set_clk(ATH79_CLK_DDR, ddr_rate); - ath79_set_clk(ATH79_CLK_AHB, ahb_rate); -- -- clk_add_alias("wdt", NULL, "ref", NULL); -- clk_add_alias("uart", NULL, "ref", NULL); - } - - void __init ath79_clocks_init(void) - { -+ const char *wdt; -+ const char *uart; -+ - if (soc_is_ar71xx()) - ar71xx_clocks_init(); - else if (soc_is_ar724x() || soc_is_ar913x()) -@@ -640,6 +622,20 @@ void __init ath79_clocks_init(void) - qca956x_clocks_init(); - else - BUG(); -+ -+ if (soc_is_ar71xx() || soc_is_ar724x() || soc_is_ar913x()) { -+ wdt = "ahb"; -+ uart = "ahb"; -+ } else if (soc_is_ar933x()) { -+ wdt = "ahb"; -+ uart = "ref"; -+ } else { -+ wdt = "ref"; -+ uart = "ref"; -+ } -+ -+ clk_add_alias("wdt", NULL, wdt, NULL); -+ clk_add_alias("uart", NULL, uart, NULL); - } - - unsigned long __init diff --git a/target/linux/ath79/patches-4.14/0030-MIPS-ath79-pass-PLL-base-to-clock-init-functions.patch b/target/linux/ath79/patches-4.14/0030-MIPS-ath79-pass-PLL-base-to-clock-init-functions.patch deleted file mode 100644 index d326880..0000000 --- a/target/linux/ath79/patches-4.14/0030-MIPS-ath79-pass-PLL-base-to-clock-init-functions.patch +++ /dev/null @@ -1,238 +0,0 @@ -From: Felix Fietkau <nbd@nbd.name> -Date: Tue, 6 Mar 2018 13:23:20 +0100 -Subject: [PATCH] MIPS: ath79: pass PLL base to clock init functions - -Preparation for passing the mapped base via DT - -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- - ---- a/arch/mips/ath79/clock.c -+++ b/arch/mips/ath79/clock.c -@@ -79,7 +79,7 @@ static struct clk * __init ath79_set_ff_ - return clk; - } - --static void __init ar71xx_clocks_init(void) -+static void __init ar71xx_clocks_init(void __iomem *pll_base) - { - unsigned long ref_rate; - unsigned long cpu_rate; -@@ -91,7 +91,7 @@ static void __init ar71xx_clocks_init(vo - - ref_rate = AR71XX_BASE_FREQ; - -- pll = ath79_pll_rr(AR71XX_PLL_REG_CPU_CONFIG); -+ pll = __raw_readl(pll_base + AR71XX_PLL_REG_CPU_CONFIG); - - div = ((pll >> AR71XX_PLL_FB_SHIFT) & AR71XX_PLL_FB_MASK) + 1; - freq = div * ref_rate; -@@ -129,13 +129,13 @@ static void __init ar724x_clk_init(struc - ath79_set_ff_clk(ATH79_CLK_AHB, "ref", mult, div * ahb_div); - } - --static void __init ar724x_clocks_init(void) -+static void __init ar724x_clocks_init(void __iomem *pll_base) - { - struct clk *ref_clk; - - ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ); - -- ar724x_clk_init(ref_clk, ath79_pll_base); -+ ar724x_clk_init(ref_clk, pll_base); - } - - static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base) -@@ -196,7 +196,7 @@ static void __init ar9330_clk_init(struc - ref_div * out_div * ahb_div); - } - --static void __init ar933x_clocks_init(void) -+static void __init ar933x_clocks_init(void __iomem *pll_base) - { - struct clk *ref_clk; - unsigned long ref_rate; -@@ -233,7 +233,7 @@ static u32 __init ar934x_get_pll_freq(u3 - return ret; - } - --static void __init ar934x_clocks_init(void) -+static void __init ar934x_clocks_init(void __iomem *pll_base) - { - unsigned long ref_rate; - unsigned long cpu_rate; -@@ -264,7 +264,7 @@ static void __init ar934x_clocks_init(vo - AR934X_SRIF_DPLL1_REFDIV_MASK; - frac = 1 << 18; - } else { -- pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG); -+ pll = __raw_readl(pll_base + AR934X_PLL_CPU_CONFIG_REG); - out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & - AR934X_PLL_CPU_CONFIG_OUTDIV_MASK; - ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) & -@@ -291,7 +291,7 @@ static void __init ar934x_clocks_init(vo - AR934X_SRIF_DPLL1_REFDIV_MASK; - frac = 1 << 18; - } else { -- pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG); -+ pll = __raw_readl(pll_base + AR934X_PLL_DDR_CONFIG_REG); - out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) & - AR934X_PLL_DDR_CONFIG_OUTDIV_MASK; - ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) & -@@ -306,7 +306,7 @@ static void __init ar934x_clocks_init(vo - ddr_pll = ar934x_get_pll_freq(ref_rate, ref_div, nint, - nfrac, frac, out_div); - -- clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG); -+ clk_ctrl = __raw_readl(pll_base + AR934X_PLL_CPU_DDR_CLK_CTRL_REG); - - postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT) & - AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK; -@@ -346,7 +346,7 @@ static void __init ar934x_clocks_init(vo - iounmap(dpll_base); - } - --static void __init qca953x_clocks_init(void) -+static void __init qca953x_clocks_init(void __iomem *pll_base) - { - unsigned long ref_rate; - unsigned long cpu_rate; -@@ -362,7 +362,7 @@ static void __init qca953x_clocks_init(v - else - ref_rate = 25 * 1000 * 1000; - -- pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG); -+ pll = __raw_readl(pll_base + QCA953X_PLL_CPU_CONFIG_REG); - out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & - QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK; - ref_div = (pll >> QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT) & -@@ -376,7 +376,7 @@ static void __init qca953x_clocks_init(v - cpu_pll += frac * (ref_rate >> 6) / ref_div; - cpu_pll /= (1 << out_div); - -- pll = ath79_pll_rr(QCA953X_PLL_DDR_CONFIG_REG); -+ pll = __raw_readl(pll_base + QCA953X_PLL_DDR_CONFIG_REG); - out_div = (pll >> QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT) & - QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK; - ref_div = (pll >> QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT) & -@@ -390,7 +390,7 @@ static void __init qca953x_clocks_init(v - ddr_pll += frac * (ref_rate >> 6) / (ref_div << 4); - ddr_pll /= (1 << out_div); - -- clk_ctrl = ath79_pll_rr(QCA953X_PLL_CLK_CTRL_REG); -+ clk_ctrl = __raw_readl(pll_base + QCA953X_PLL_CLK_CTRL_REG); - - postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) & - QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK; -@@ -428,7 +428,7 @@ static void __init qca953x_clocks_init(v - ath79_set_clk(ATH79_CLK_AHB, ahb_rate); - } - --static void __init qca955x_clocks_init(void) -+static void __init qca955x_clocks_init(void __iomem *pll_base) - { - unsigned long ref_rate; - unsigned long cpu_rate; -@@ -444,7 +444,7 @@ static void __init qca955x_clocks_init(v - else - ref_rate = 25 * 1000 * 1000; - -- pll = ath79_pll_rr(QCA955X_PLL_CPU_CONFIG_REG); -+ pll = __raw_readl(pll_base + QCA955X_PLL_CPU_CONFIG_REG); - out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & - QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK; - ref_div = (pll >> QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT) & -@@ -458,7 +458,7 @@ static void __init qca955x_clocks_init(v - cpu_pll += frac * ref_rate / (ref_div * (1 << 6)); - cpu_pll /= (1 << out_div); - -- pll = ath79_pll_rr(QCA955X_PLL_DDR_CONFIG_REG); -+ pll = __raw_readl(pll_base + QCA955X_PLL_DDR_CONFIG_REG); - out_div = (pll >> QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT) & - QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK; - ref_div = (pll >> QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT) & -@@ -472,7 +472,7 @@ static void __init qca955x_clocks_init(v - ddr_pll += frac * ref_rate / (ref_div * (1 << 10)); - ddr_pll /= (1 << out_div); - -- clk_ctrl = ath79_pll_rr(QCA955X_PLL_CLK_CTRL_REG); -+ clk_ctrl = __raw_readl(pll_base + QCA955X_PLL_CLK_CTRL_REG); - - postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) & - QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK; -@@ -510,7 +510,7 @@ static void __init qca955x_clocks_init(v - ath79_set_clk(ATH79_CLK_AHB, ahb_rate); - } - --static void __init qca956x_clocks_init(void) -+static void __init qca956x_clocks_init(void __iomem *pll_base) - { - unsigned long ref_rate; - unsigned long cpu_rate; -@@ -526,13 +526,13 @@ static void __init qca956x_clocks_init(v - else - ref_rate = 25 * 1000 * 1000; - -- pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG_REG); -+ pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG_REG); - out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & - QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK; - ref_div = (pll >> QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT) & - QCA956X_PLL_CPU_CONFIG_REFDIV_MASK; - -- pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG1_REG); -+ pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG1_REG); - nint = (pll >> QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT) & - QCA956X_PLL_CPU_CONFIG1_NINT_MASK; - hfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT) & -@@ -545,12 +545,12 @@ static void __init qca956x_clocks_init(v - cpu_pll += (hfrac >> 13) * ref_rate / ref_div; - cpu_pll /= (1 << out_div); - -- pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG_REG); -+ pll = __raw_readl(pll_base + QCA956X_PLL_DDR_CONFIG_REG); - out_div = (pll >> QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT) & - QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK; - ref_div = (pll >> QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT) & - QCA956X_PLL_DDR_CONFIG_REFDIV_MASK; -- pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG1_REG); -+ pll = __raw_readl(pll_base + QCA956X_PLL_DDR_CONFIG1_REG); - nint = (pll >> QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT) & - QCA956X_PLL_DDR_CONFIG1_NINT_MASK; - hfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT) & -@@ -563,7 +563,7 @@ static void __init qca956x_clocks_init(v - ddr_pll += (hfrac >> 13) * ref_rate / ref_div; - ddr_pll /= (1 << out_div); - -- clk_ctrl = ath79_pll_rr(QCA956X_PLL_CLK_CTRL_REG); -+ clk_ctrl = __raw_readl(pll_base + QCA956X_PLL_CLK_CTRL_REG); - - postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) & - QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK; -@@ -607,19 +607,19 @@ void __init ath79_clocks_init(void) - const char *uart; - - if (soc_is_ar71xx()) -- ar71xx_clocks_init(); -+ ar71xx_clocks_init(ath79_pll_base); - else if (soc_is_ar724x() || soc_is_ar913x()) -- ar724x_clocks_init(); -+ ar724x_clocks_init(ath79_pll_base); - else if (soc_is_ar933x()) -- ar933x_clocks_init(); -+ ar933x_clocks_init(ath79_pll_base); - else if (soc_is_ar934x()) -- ar934x_clocks_init(); -+ ar934x_clocks_init(ath79_pll_base); - else if (soc_is_qca953x()) -- qca953x_clocks_init(); -+ qca953x_clocks_init(ath79_pll_base); - else if (soc_is_qca955x()) -- qca955x_clocks_init(); -+ qca955x_clocks_init(ath79_pll_base); - else if (soc_is_qca956x() || soc_is_tp9343()) -- qca956x_clocks_init(); -+ qca956x_clocks_init(ath79_pll_base); - else - BUG(); - diff --git a/target/linux/ath79/patches-4.14/0031-MIPS-ath79-make-specifying-the-reference-clock-in-DT.patch b/target/linux/ath79/patches-4.14/0031-MIPS-ath79-make-specifying-the-reference-clock-in-DT.patch deleted file mode 100644 index 9cadc02..0000000 --- a/target/linux/ath79/patches-4.14/0031-MIPS-ath79-make-specifying-the-reference-clock-in-DT.patch +++ /dev/null @@ -1,225 +0,0 @@ -From: Felix Fietkau <nbd@nbd.name> -Date: Tue, 6 Mar 2018 13:24:07 +0100 -Subject: [PATCH] MIPS: ath79: make specifying the reference clock in DT - optional - -It can be autodetected for many SoCs using the strapping options. -If the clock is specified in DT, the autodetected value is ignored - -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- - ---- a/arch/mips/ath79/clock.c -+++ b/arch/mips/ath79/clock.c -@@ -79,6 +79,18 @@ static struct clk * __init ath79_set_ff_ - return clk; - } - -+static unsigned long __init ath79_setup_ref_clk(unsigned long rate) -+{ -+ struct clk *clk = clks[ATH79_CLK_REF]; -+ -+ if (clk) -+ rate = clk_get_rate(clk); -+ else -+ clk = ath79_set_clk(ATH79_CLK_REF, rate); -+ -+ return rate; -+} -+ - static void __init ar71xx_clocks_init(void __iomem *pll_base) - { - unsigned long ref_rate; -@@ -89,7 +101,7 @@ static void __init ar71xx_clocks_init(vo - u32 freq; - u32 div; - -- ref_rate = AR71XX_BASE_FREQ; -+ ref_rate = ath79_setup_ref_clk(AR71XX_BASE_FREQ); - - pll = __raw_readl(pll_base + AR71XX_PLL_REG_CPU_CONFIG); - -@@ -105,16 +117,17 @@ static void __init ar71xx_clocks_init(vo - div = (((pll >> AR71XX_AHB_DIV_SHIFT) & AR71XX_AHB_DIV_MASK) + 1) * 2; - ahb_rate = cpu_rate / div; - -- ath79_set_clk(ATH79_CLK_REF, ref_rate); - ath79_set_clk(ATH79_CLK_CPU, cpu_rate); - ath79_set_clk(ATH79_CLK_DDR, ddr_rate); - ath79_set_clk(ATH79_CLK_AHB, ahb_rate); - } - --static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base) -+static void __init ar724x_clocks_init(void __iomem *pll_base) - { -- u32 pll; - u32 mult, div, ddr_div, ahb_div; -+ u32 pll; -+ -+ ath79_setup_ref_clk(AR71XX_BASE_FREQ); - - pll = __raw_readl(pll_base + AR724X_PLL_REG_CPU_CONFIG); - -@@ -129,17 +142,9 @@ static void __init ar724x_clk_init(struc - ath79_set_ff_clk(ATH79_CLK_AHB, "ref", mult, div * ahb_div); - } - --static void __init ar724x_clocks_init(void __iomem *pll_base) --{ -- struct clk *ref_clk; -- -- ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ); -- -- ar724x_clk_init(ref_clk, pll_base); --} -- --static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base) -+static void __init ar933x_clocks_init(void __iomem *pll_base) - { -+ unsigned long ref_rate; - u32 clock_ctrl; - u32 ref_div; - u32 ninit_mul; -@@ -148,6 +153,15 @@ static void __init ar9330_clk_init(struc - u32 cpu_div; - u32 ddr_div; - u32 ahb_div; -+ u32 t; -+ -+ t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); -+ if (t & AR933X_BOOTSTRAP_REF_CLK_40) -+ ref_rate = (40 * 1000 * 1000); -+ else -+ ref_rate = (25 * 1000 * 1000); -+ -+ ath79_setup_ref_clk(ref_rate); - - clock_ctrl = __raw_readl(pll_base + AR933X_PLL_CLOCK_CTRL_REG); - if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) { -@@ -196,23 +210,6 @@ static void __init ar9330_clk_init(struc - ref_div * out_div * ahb_div); - } - --static void __init ar933x_clocks_init(void __iomem *pll_base) --{ -- struct clk *ref_clk; -- unsigned long ref_rate; -- u32 t; -- -- t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); -- if (t & AR933X_BOOTSTRAP_REF_CLK_40) -- ref_rate = (40 * 1000 * 1000); -- else -- ref_rate = (25 * 1000 * 1000); -- -- ref_clk = ath79_set_clk(ATH79_CLK_REF, ref_rate); -- -- ar9330_clk_init(ref_clk, ath79_pll_base); --} -- - static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac, - u32 frac, u32 out_div) - { -@@ -252,6 +249,8 @@ static void __init ar934x_clocks_init(vo - else - ref_rate = 25 * 1000 * 1000; - -+ ref_rate = ath79_setup_ref_clk(ref_rate); -+ - pll = __raw_readl(dpll_base + AR934X_SRIF_CPU_DPLL2_REG); - if (pll & AR934X_SRIF_DPLL2_LOCAL_PLL) { - out_div = (pll >> AR934X_SRIF_DPLL2_OUTDIV_SHIFT) & -@@ -338,7 +337,6 @@ static void __init ar934x_clocks_init(vo - else - ahb_rate = cpu_pll / (postdiv + 1); - -- ath79_set_clk(ATH79_CLK_REF, ref_rate); - ath79_set_clk(ATH79_CLK_CPU, cpu_rate); - ath79_set_clk(ATH79_CLK_DDR, ddr_rate); - ath79_set_clk(ATH79_CLK_AHB, ahb_rate); -@@ -362,6 +360,8 @@ static void __init qca953x_clocks_init(v - else - ref_rate = 25 * 1000 * 1000; - -+ ref_rate = ath79_setup_ref_clk(ref_rate); -+ - pll = __raw_readl(pll_base + QCA953X_PLL_CPU_CONFIG_REG); - out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & - QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK; -@@ -422,7 +422,6 @@ static void __init qca953x_clocks_init(v - else - ahb_rate = cpu_pll / (postdiv + 1); - -- ath79_set_clk(ATH79_CLK_REF, ref_rate); - ath79_set_clk(ATH79_CLK_CPU, cpu_rate); - ath79_set_clk(ATH79_CLK_DDR, ddr_rate); - ath79_set_clk(ATH79_CLK_AHB, ahb_rate); -@@ -444,6 +443,8 @@ static void __init qca955x_clocks_init(v - else - ref_rate = 25 * 1000 * 1000; - -+ ref_rate = ath79_setup_ref_clk(ref_rate); -+ - pll = __raw_readl(pll_base + QCA955X_PLL_CPU_CONFIG_REG); - out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & - QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK; -@@ -504,7 +505,6 @@ static void __init qca955x_clocks_init(v - else - ahb_rate = cpu_pll / (postdiv + 1); - -- ath79_set_clk(ATH79_CLK_REF, ref_rate); - ath79_set_clk(ATH79_CLK_CPU, cpu_rate); - ath79_set_clk(ATH79_CLK_DDR, ddr_rate); - ath79_set_clk(ATH79_CLK_AHB, ahb_rate); -@@ -526,6 +526,8 @@ static void __init qca956x_clocks_init(v - else - ref_rate = 25 * 1000 * 1000; - -+ ref_rate = ath79_setup_ref_clk(ref_rate); -+ - pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG_REG); - out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & - QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK; -@@ -595,7 +597,6 @@ static void __init qca956x_clocks_init(v - else - ahb_rate = cpu_pll / (postdiv + 1); - -- ath79_set_clk(ATH79_CLK_REF, ref_rate); - ath79_set_clk(ATH79_CLK_CPU, cpu_rate); - ath79_set_clk(ATH79_CLK_DDR, ddr_rate); - ath79_set_clk(ATH79_CLK_AHB, ahb_rate); -@@ -671,10 +672,8 @@ static void __init ath79_clocks_init_dt_ - void __iomem *pll_base; - - ref_clk = of_clk_get(np, 0); -- if (IS_ERR(ref_clk)) { -- pr_err("%pOF: of_clk_get failed\n", np); -- goto err; -- } -+ if (!IS_ERR(ref_clk)) -+ clks[ATH79_CLK_REF] = ref_clk; - - pll_base = of_iomap(np, 0); - if (!pll_base) { -@@ -683,9 +682,9 @@ static void __init ath79_clocks_init_dt_ - } - - if (of_device_is_compatible(np, "qca,ar9130-pll")) -- ar724x_clk_init(ref_clk, pll_base); -+ ar724x_clocks_init(pll_base); - else if (of_device_is_compatible(np, "qca,ar9330-pll")) -- ar9330_clk_init(ref_clk, pll_base); -+ ar933x_clocks_init(pll_base); - else { - pr_err("%pOF: could not find any appropriate clk_init()\n", np); - goto err_iounmap; -@@ -703,9 +702,6 @@ err_iounmap: - - err_clk: - clk_put(ref_clk); -- --err: -- return; - } - CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt_ng); - CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt_ng); diff --git a/target/linux/ath79/patches-4.14/0032-MIPS-ath79-support-setting-up-clock-via-DT-on-all-So.patch b/target/linux/ath79/patches-4.14/0032-MIPS-ath79-support-setting-up-clock-via-DT-on-all-So.patch deleted file mode 100644 index 35c6ea7..0000000 --- a/target/linux/ath79/patches-4.14/0032-MIPS-ath79-support-setting-up-clock-via-DT-on-all-So.patch +++ /dev/null @@ -1,73 +0,0 @@ -From: Felix Fietkau <nbd@nbd.name> -Date: Tue, 6 Mar 2018 13:26:27 +0100 -Subject: [PATCH] MIPS: ath79: support setting up clock via DT on all SoC - types - -Use the same functions as the legacy code - -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- - ---- a/arch/mips/ath79/clock.c -+++ b/arch/mips/ath79/clock.c -@@ -658,16 +658,6 @@ ath79_get_sys_clk_rate(const char *id) - #ifdef CONFIG_OF - static void __init ath79_clocks_init_dt(struct device_node *np) - { -- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); --} -- --CLK_OF_DECLARE(ar7100, "qca,ar7100-pll", ath79_clocks_init_dt); --CLK_OF_DECLARE(ar7240, "qca,ar7240-pll", ath79_clocks_init_dt); --CLK_OF_DECLARE(ar9340, "qca,ar9340-pll", ath79_clocks_init_dt); --CLK_OF_DECLARE(ar9550, "qca,qca9550-pll", ath79_clocks_init_dt); -- --static void __init ath79_clocks_init_dt_ng(struct device_node *np) --{ - struct clk *ref_clk; - void __iomem *pll_base; - -@@ -681,14 +671,21 @@ static void __init ath79_clocks_init_dt_ - goto err_clk; - } - -- if (of_device_is_compatible(np, "qca,ar9130-pll")) -+ if (of_device_is_compatible(np, "qca,ar7100-pll")) -+ ar71xx_clocks_init(pll_base); -+ else if (of_device_is_compatible(np, "qca,ar7240-pll") || -+ of_device_is_compatible(np, "qca,ar9130-pll")) - ar724x_clocks_init(pll_base); - else if (of_device_is_compatible(np, "qca,ar9330-pll")) - ar933x_clocks_init(pll_base); -- else { -- pr_err("%pOF: could not find any appropriate clk_init()\n", np); -- goto err_iounmap; -- } -+ else if (of_device_is_compatible(np, "qca,ar9340-pll")) -+ ar934x_clocks_init(pll_base); -+ else if (of_device_is_compatible(np, "qca,qca9530-pll")) -+ qca953x_clocks_init(pll_base); -+ else if (of_device_is_compatible(np, "qca,qca9550-pll")) -+ qca955x_clocks_init(pll_base); -+ else if (of_device_is_compatible(np, "qca,qca9560-pll")) -+ qca956x_clocks_init(pll_base); - - if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) { - pr_err("%pOF: could not register clk provider\n", np); -@@ -703,6 +700,14 @@ err_iounmap: - err_clk: - clk_put(ref_clk); - } --CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt_ng); --CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt_ng); -+ -+CLK_OF_DECLARE(ar7100_clk, "qca,ar7100-pll", ath79_clocks_init_dt); -+CLK_OF_DECLARE(ar7240_clk, "qca,ar7240-pll", ath79_clocks_init_dt); -+CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt); -+CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt); -+CLK_OF_DECLARE(ar9340_clk, "qca,ar9340-pll", ath79_clocks_init_dt); -+CLK_OF_DECLARE(ar9530_clk, "qca,qca9530-pll", ath79_clocks_init_dt); -+CLK_OF_DECLARE(ar9550_clk, "qca,qca9550-pll", ath79_clocks_init_dt); -+CLK_OF_DECLARE(ar9560_clk, "qca,qca9560-pll", ath79_clocks_init_dt); -+ - #endif diff --git a/target/linux/ath79/patches-4.14/0033-MIPS-ath79-export-switch-MDIO-reference-clock.patch b/target/linux/ath79/patches-4.14/0033-MIPS-ath79-export-switch-MDIO-reference-clock.patch deleted file mode 100644 index 6530344..0000000 --- a/target/linux/ath79/patches-4.14/0033-MIPS-ath79-export-switch-MDIO-reference-clock.patch +++ /dev/null @@ -1,54 +0,0 @@ -From: Felix Fietkau <nbd@nbd.name> -Date: Tue, 6 Mar 2018 13:27:28 +0100 -Subject: [PATCH] MIPS: ath79: export switch MDIO reference clock - -On AR934x, the MDIO reference clock can be configured to a fixed 100 MHz -clock. If that feature is not used, it defaults to the main reference clock, -like on all other SoC. - -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- - ---- a/arch/mips/ath79/clock.c -+++ b/arch/mips/ath79/clock.c -@@ -41,6 +41,7 @@ static const char * const clk_names[ATH7 - [ATH79_CLK_DDR] = "ddr", - [ATH79_CLK_AHB] = "ahb", - [ATH79_CLK_REF] = "ref", -+ [ATH79_CLK_MDIO] = "mdio", - }; - - static const char * __init ath79_clk_name(int type) -@@ -341,6 +342,10 @@ static void __init ar934x_clocks_init(vo - ath79_set_clk(ATH79_CLK_DDR, ddr_rate); - ath79_set_clk(ATH79_CLK_AHB, ahb_rate); - -+ clk_ctrl = __raw_readl(pll_base + AR934X_PLL_SWITCH_CLOCK_CONTROL_REG); -+ if (clk_ctrl & AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL) -+ ath79_set_clk(ATH79_CLK_MDIO, 100 * 1000 * 1000); -+ - iounmap(dpll_base); - } - -@@ -687,6 +692,9 @@ static void __init ath79_clocks_init_dt( - else if (of_device_is_compatible(np, "qca,qca9560-pll")) - qca956x_clocks_init(pll_base); - -+ if (!clks[ATH79_CLK_MDIO]) -+ clks[ATH79_CLK_MDIO] = clks[ATH79_CLK_REF]; -+ - if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) { - pr_err("%pOF: could not register clk provider\n", np); - goto err_iounmap; ---- a/include/dt-bindings/clock/ath79-clk.h -+++ b/include/dt-bindings/clock/ath79-clk.h -@@ -14,7 +14,8 @@ - #define ATH79_CLK_DDR 1 - #define ATH79_CLK_AHB 2 - #define ATH79_CLK_REF 3 -+#define ATH79_CLK_MDIO 4 - --#define ATH79_CLK_END 4 -+#define ATH79_CLK_END 5 - - #endif /* __DT_BINDINGS_ATH79_CLK_H */ diff --git a/target/linux/ath79/patches-4.14/004-register_gpio_driver_earlier.patch b/target/linux/ath79/patches-4.14/004-register_gpio_driver_earlier.patch deleted file mode 100644 index cc30e2d..0000000 --- a/target/linux/ath79/patches-4.14/004-register_gpio_driver_earlier.patch +++ /dev/null @@ -1,18 +0,0 @@ -HACK: register the GPIO driver earlier to ensure that gpio_request calls -from mach files succeed. - ---- a/drivers/gpio/gpio-ath79.c -+++ b/drivers/gpio/gpio-ath79.c -@@ -322,7 +322,11 @@ static struct platform_driver ath79_gpio - .remove = ath79_gpio_remove, - }; - --module_platform_driver(ath79_gpio_driver); -+static int __init ath79_gpio_init(void) -+{ -+ return platform_driver_register(&ath79_gpio_driver); -+} -+postcore_initcall(ath79_gpio_init); - - MODULE_DESCRIPTION("Atheros AR71XX/AR724X/AR913X GPIO API support"); - MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ath79/patches-4.14/405-mtd-tp-link-partition-parser.patch b/target/linux/ath79/patches-4.14/405-mtd-tp-link-partition-parser.patch deleted file mode 100644 index 846b7f0..0000000 --- a/target/linux/ath79/patches-4.14/405-mtd-tp-link-partition-parser.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -194,6 +194,12 @@ config MTD_MYLOADER_PARTS - You will still need the parsing functions to be called by the driver - for your particular device. It won't happen automatically. - -+config MTD_TPLINK_PARTS -+ tristate "TP-Link AR7XXX/AR9XXX partitioning support" -+ depends on ATH79 -+ ---help--- -+ TBD. -+ - comment "User Modules And Translation Layers" - - # ---- a/drivers/mtd/Makefile -+++ b/drivers/mtd/Makefile -@@ -18,6 +18,7 @@ obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63 - obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o - obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o - obj-y += parsers/ -+obj-$(CONFIG_MTD_TPLINK_PARTS) += tplinkpart.o - - # 'Users' - code which presents functionality to userspace. - obj-$(CONFIG_MTD_BLKDEVS) += mtd_blkdevs.o diff --git a/target/linux/ath79/patches-4.14/420-net-ar71xx_mac_driver.patch b/target/linux/ath79/patches-4.14/420-net-ar71xx_mac_driver.patch deleted file mode 100644 index 6377db0..0000000 --- a/target/linux/ath79/patches-4.14/420-net-ar71xx_mac_driver.patch +++ /dev/null @@ -1,28 +0,0 @@ ---- a/drivers/net/ethernet/atheros/Kconfig -+++ b/drivers/net/ethernet/atheros/Kconfig -@@ -5,7 +5,7 @@ - config NET_VENDOR_ATHEROS - bool "Atheros devices" - default y -- depends on PCI -+ depends on (PCI || ATH79) - ---help--- - If you have a network (Ethernet) card belonging to this class, say Y. - -@@ -78,4 +78,6 @@ config ALX - To compile this driver as a module, choose M here. The module - will be called alx. - -+source drivers/net/ethernet/atheros/ag71xx/Kconfig -+ - endif # NET_VENDOR_ATHEROS ---- a/drivers/net/ethernet/atheros/Makefile -+++ b/drivers/net/ethernet/atheros/Makefile -@@ -3,6 +3,7 @@ - # Makefile for the Atheros network device drivers. - # - -+obj-$(CONFIG_AG71XX) += ag71xx/ - obj-$(CONFIG_ATL1) += atlx/ - obj-$(CONFIG_ATL2) += atlx/ - obj-$(CONFIG_ATL1E) += atl1e/ diff --git a/target/linux/ath79/patches-4.14/430-drivers-link-spi-before-mtd.patch b/target/linux/ath79/patches-4.14/430-drivers-link-spi-before-mtd.patch deleted file mode 100644 index 2f15497..0000000 --- a/target/linux/ath79/patches-4.14/430-drivers-link-spi-before-mtd.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/drivers/Makefile -+++ b/drivers/Makefile -@@ -83,8 +83,8 @@ obj-$(CONFIG_SCSI) += scsi/ - obj-y += nvme/ - obj-$(CONFIG_ATA) += ata/ - obj-$(CONFIG_TARGET_CORE) += target/ --obj-$(CONFIG_MTD) += mtd/ - obj-$(CONFIG_SPI) += spi/ -+obj-$(CONFIG_MTD) += mtd/ - obj-$(CONFIG_SPMI) += spmi/ - obj-$(CONFIG_HSI) += hsi/ - obj-y += net/ diff --git a/target/linux/ath79/patches-4.14/461-spi-ath79-add-fast-flash-read.patch b/target/linux/ath79/patches-4.14/461-spi-ath79-add-fast-flash-read.patch deleted file mode 100644 index 06da2b3..0000000 --- a/target/linux/ath79/patches-4.14/461-spi-ath79-add-fast-flash-read.patch +++ /dev/null @@ -1,60 +0,0 @@ ---- a/drivers/spi/spi-ath79.c -+++ b/drivers/spi/spi-ath79.c -@@ -102,9 +102,6 @@ static void ath79_spi_enable(struct ath7 - /* save CTRL register */ - sp->reg_ctrl = ath79_spi_rr(sp, AR71XX_SPI_REG_CTRL); - sp->ioc_base = ath79_spi_rr(sp, AR71XX_SPI_REG_IOC); -- -- /* TODO: setup speed? */ -- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43); - } - - static void ath79_spi_disable(struct ath79_spi *sp) -@@ -204,6 +201,38 @@ static u32 ath79_spi_txrx_mode0(struct s - return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS); - } - -+static bool ath79_spi_flash_read_supported(struct spi_device *spi) -+{ -+ if (spi->chip_select || gpio_is_valid(spi->cs_gpio)) -+ return false; -+ -+ return true; -+} -+ -+static int ath79_spi_read_flash_data(struct spi_device *spi, -+ struct spi_flash_read_message *msg) -+{ -+ struct ath79_spi *sp = ath79_spidev_to_sp(spi); -+ -+ if (msg->addr_width > 3) -+ return -EOPNOTSUPP; -+ -+ /* disable GPIO mode */ -+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0); -+ -+ memcpy_fromio(msg->buf, sp->base + msg->from, msg->len); -+ -+ /* enable GPIO mode */ -+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO); -+ -+ /* restore IOC register */ -+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); -+ -+ msg->retlen = msg->len; -+ -+ return 0; -+} -+ - static int ath79_spi_probe(struct platform_device *pdev) - { - struct spi_master *master; -@@ -232,6 +261,8 @@ static int ath79_spi_probe(struct platfo - master->bus_num = pdata->bus_num; - master->num_chipselect = pdata->num_chipselect; - } -+ master->spi_flash_read = ath79_spi_read_flash_data; -+ master->flash_read_supported = ath79_spi_flash_read_supported; - - sp->bitbang.master = master; - sp->bitbang.chipselect = ath79_spi_chipselect; diff --git a/target/linux/ath79/patches-4.14/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch b/target/linux/ath79/patches-4.14/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch deleted file mode 100644 index ad8b7b4..0000000 --- a/target/linux/ath79/patches-4.14/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch +++ /dev/null @@ -1,98 +0,0 @@ ---- /dev/null -+++ b/arch/mips/include/asm/mach-ath79/mangle-port.h -@@ -0,0 +1,37 @@ -+/* -+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> -+ * -+ * This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h -+ * Copyright (C) 2003, 2004 Ralf Baechle -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H -+#define __ASM_MACH_ATH79_MANGLE_PORT_H -+ -+#ifdef CONFIG_PCI_AR71XX -+extern unsigned long (ath79_pci_swizzle_b)(unsigned long port); -+extern unsigned long (ath79_pci_swizzle_w)(unsigned long port); -+#else -+#define ath79_pci_swizzle_b(port) (port) -+#define ath79_pci_swizzle_w(port) (port) -+#endif -+ -+#define __swizzle_addr_b(port) ath79_pci_swizzle_b(port) -+#define __swizzle_addr_w(port) ath79_pci_swizzle_w(port) -+#define __swizzle_addr_l(port) (port) -+#define __swizzle_addr_q(port) (port) -+ -+# define ioswabb(a, x) (x) -+# define __mem_ioswabb(a, x) (x) -+# define ioswabw(a, x) (x) -+# define __mem_ioswabw(a, x) cpu_to_le16(x) -+# define ioswabl(a, x) (x) -+# define __mem_ioswabl(a, x) cpu_to_le32(x) -+# define ioswabq(a, x) (x) -+# define __mem_ioswabq(a, x) cpu_to_le64(x) -+ -+#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */ ---- a/arch/mips/pci/pci-ar71xx.c -+++ b/arch/mips/pci/pci-ar71xx.c -@@ -73,6 +73,45 @@ static const u32 ar71xx_pci_read_mask[8] - 0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0 - }; - -+static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port); -+static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port); -+ -+static inline bool ar71xx_is_pci_addr(unsigned long port) -+{ -+ unsigned long phys = CPHYSADDR(port); -+ -+ return (phys >= AR71XX_PCI_MEM_BASE && -+ phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE); -+} -+ -+static unsigned long ar71xx_pci_swizzle_b(unsigned long port) -+{ -+ return ar71xx_is_pci_addr(port) ? port ^ 3 : port; -+} -+ -+static unsigned long ar71xx_pci_swizzle_w(unsigned long port) -+{ -+ return ar71xx_is_pci_addr(port) ? port ^ 2 : port; -+} -+ -+unsigned long ath79_pci_swizzle_b(unsigned long port) -+{ -+ if (__ath79_pci_swizzle_b) -+ return __ath79_pci_swizzle_b(port); -+ -+ return port; -+} -+EXPORT_SYMBOL(ath79_pci_swizzle_b); -+ -+unsigned long ath79_pci_swizzle_w(unsigned long port) -+{ -+ if (__ath79_pci_swizzle_w) -+ return __ath79_pci_swizzle_w(port); -+ -+ return port; -+} -+EXPORT_SYMBOL(ath79_pci_swizzle_w); -+ - static inline u32 ar71xx_pci_get_ble(int where, int size, int local) - { - u32 t; -@@ -384,6 +423,9 @@ static int ar71xx_pci_probe(struct platf - - register_pci_controller(&apc->pci_ctrl); - -+ __ath79_pci_swizzle_b = ar71xx_pci_swizzle_b; -+ __ath79_pci_swizzle_w = ar71xx_pci_swizzle_w; -+ - return 0; - } - diff --git a/target/linux/ath79/patches-4.14/490-usb-ehci-add-quirks-for-qca-socs.patch b/target/linux/ath79/patches-4.14/490-usb-ehci-add-quirks-for-qca-socs.patch deleted file mode 100644 index 1d1979c..0000000 --- a/target/linux/ath79/patches-4.14/490-usb-ehci-add-quirks-for-qca-socs.patch +++ /dev/null @@ -1,103 +0,0 @@ ---- a/drivers/usb/host/ehci-hcd.c -+++ b/drivers/usb/host/ehci-hcd.c -@@ -252,6 +252,37 @@ int ehci_reset(struct ehci_hcd *ehci) - command |= CMD_RESET; - dbg_cmd (ehci, "reset", command); - ehci_writel(ehci, command, &ehci->regs->command); -+ -+ if (ehci->qca_force_host_mode) { -+ u32 usbmode; -+ -+ udelay(1000); -+ -+ usbmode = ehci_readl(ehci, &ehci->regs->usbmode); -+ usbmode |= USBMODE_CM_HC | (1 << 4); -+ ehci_writel(ehci, usbmode, &ehci->regs->usbmode); -+ -+ ehci_dbg(ehci, "forced host mode, usbmode: %08x\n", -+ ehci_readl(ehci, &ehci->regs->usbmode)); -+ } -+ -+ if (ehci->qca_force_16bit_ptw) { -+ u32 port_status; -+ -+ udelay(1000); -+ -+ /* enable 16-bit UTMI interface */ -+ port_status = ehci_readl(ehci, &ehci->regs->port_status[0]); -+ port_status |= BIT(28); -+ ehci_writel(ehci, port_status, &ehci->regs->port_status[0]); -+ -+ ehci_dbg(ehci, "16-bit UTMI interface enabled, status: %08x\n", -+ ehci_readl(ehci, &ehci->regs->port_status[0])); -+ } -+ -+ if (ehci->reset_notifier) -+ ehci->reset_notifier(ehci_to_hcd(ehci)); -+ - ehci->rh_state = EHCI_RH_HALTED; - ehci->next_statechange = jiffies; - retval = ehci_handshake(ehci, &ehci->regs->command, ---- a/drivers/usb/host/ehci.h -+++ b/drivers/usb/host/ehci.h -@@ -232,6 +232,10 @@ struct ehci_hcd { /* one per controlle - unsigned need_oc_pp_cycle:1; /* MPC834X port power */ - unsigned imx28_write_fix:1; /* For Freescale i.MX28 */ - unsigned ignore_oc:1; -+ unsigned qca_force_host_mode:1; -+ unsigned qca_force_16bit_ptw:1; /* force 16 bit UTMI */ -+ -+ void (*reset_notifier)(struct usb_hcd *hcd); - - /* required for usb32 quirk */ - #define OHCI_CTRL_HCFS (3 << 6) ---- a/include/linux/usb/ehci_pdriver.h -+++ b/include/linux/usb/ehci_pdriver.h -@@ -50,6 +50,8 @@ struct usb_ehci_pdata { - unsigned reset_on_resume:1; - unsigned dma_mask_64:1; - unsigned ignore_oc:1; -+ unsigned qca_force_host_mode:1; -+ unsigned qca_force_16bit_ptw:1; - - /* Turn on all power and clocks */ - int (*power_on)(struct platform_device *pdev); -@@ -59,6 +61,7 @@ struct usb_ehci_pdata { - * turn off everything else */ - void (*power_suspend)(struct platform_device *pdev); - int (*pre_setup)(struct usb_hcd *hcd); -+ void (*reset_notifier)(struct platform_device *pdev); - }; - - #endif /* __USB_CORE_EHCI_PDRIVER_H */ ---- a/drivers/usb/host/ehci-platform.c -+++ b/drivers/usb/host/ehci-platform.c -@@ -53,6 +53,14 @@ struct ehci_platform_priv { - - static const char hcd_name[] = "ehci-platform"; - -+static void ehci_platform_reset_notifier(struct usb_hcd *hcd) -+{ -+ struct platform_device *pdev = to_platform_device(hcd->self.controller); -+ struct usb_ehci_pdata *pdata = pdev->dev.platform_data; -+ -+ pdata->reset_notifier(pdev); -+} -+ - static int ehci_platform_reset(struct usb_hcd *hcd) - { - struct platform_device *pdev = to_platform_device(hcd->self.controller); -@@ -270,6 +278,13 @@ static int ehci_platform_probe(struct pl - priv->reset_on_resume = true; - if (pdata->ignore_oc) - ehci->ignore_oc = 1; -+ if (pdata->qca_force_host_mode) -+ ehci->qca_force_host_mode = 1; -+ if (pdata->qca_force_16bit_ptw) -+ ehci->qca_force_16bit_ptw = 1; -+ -+ if (pdata->reset_notifier) -+ ehci->reset_notifier = ehci_platform_reset_notifier; - - #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO - if (ehci->big_endian_mmio) { diff --git a/target/linux/ath79/patches-4.14/900-mdio_bitbang_ignore_ta_value.patch b/target/linux/ath79/patches-4.14/900-mdio_bitbang_ignore_ta_value.patch deleted file mode 100644 index 8f8f349..0000000 --- a/target/linux/ath79/patches-4.14/900-mdio_bitbang_ignore_ta_value.patch +++ /dev/null @@ -1,32 +0,0 @@ ---- a/drivers/net/phy/mdio-bitbang.c -+++ b/drivers/net/phy/mdio-bitbang.c -@@ -155,7 +155,7 @@ static int mdiobb_cmd_addr(struct mdiobb - static int mdiobb_read(struct mii_bus *bus, int phy, int reg) - { - struct mdiobb_ctrl *ctrl = bus->priv; -- int ret, i; -+ int ret; - - if (reg & MII_ADDR_C45) { - reg = mdiobb_cmd_addr(ctrl, phy, reg); -@@ -165,19 +165,7 @@ static int mdiobb_read(struct mii_bus *b - - ctrl->ops->set_mdio_dir(ctrl, 0); - -- /* check the turnaround bit: the PHY should be driving it to zero, if this -- * PHY is listed in phy_ignore_ta_mask as having broken TA, skip that -- */ -- if (mdiobb_get_bit(ctrl) != 0 && -- !(bus->phy_ignore_ta_mask & (1 << phy))) { -- /* PHY didn't drive TA low -- flush any bits it -- * may be trying to send. -- */ -- for (i = 0; i < 32; i++) -- mdiobb_get_bit(ctrl); -- -- return 0xffff; -- } -+ mdiobb_get_bit(ctrl); - - ret = mdiobb_get_num(ctrl, 16); - mdiobb_get_bit(ctrl); diff --git a/target/linux/ath79/patches-4.14/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch b/target/linux/ath79/patches-4.14/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch deleted file mode 100644 index a830346..0000000 --- a/target/linux/ath79/patches-4.14/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch +++ /dev/null @@ -1,61 +0,0 @@ -From 66e584435ac0de6e0abeb6d7166fe4fe25d6bb73 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski <jogo@openwrt.org> -Date: Tue, 16 Jun 2015 13:15:08 +0200 -Subject: [PATCH] phy/mdio-bitbang: prevent rescheduling during command - -It seems some phys have some maximum timings for accessing the MDIO line, -resulting in bit errors under cpu stress. Prevent this from happening by -disabling interrupts when sending commands. - -Signed-off-by: Jonas Gorski <jogo@openwrt.org> ---- - drivers/net/phy/mdio-bitbang.c | 9 +++++++++ - 1 file changed, 9 insertions(+) - ---- a/drivers/net/phy/mdio-bitbang.c -+++ b/drivers/net/phy/mdio-bitbang.c -@@ -17,6 +17,7 @@ - * kind, whether express or implied. - */ - -+#include <linux/irqflags.h> - #include <linux/module.h> - #include <linux/mdio-bitbang.h> - #include <linux/types.h> -@@ -156,7 +157,9 @@ static int mdiobb_read(struct mii_bus *b - { - struct mdiobb_ctrl *ctrl = bus->priv; - int ret; -+ unsigned long flags; - -+ local_irq_save(flags); - if (reg & MII_ADDR_C45) { - reg = mdiobb_cmd_addr(ctrl, phy, reg); - mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg); -@@ -169,13 +172,17 @@ static int mdiobb_read(struct mii_bus *b - - ret = mdiobb_get_num(ctrl, 16); - mdiobb_get_bit(ctrl); -+ local_irq_restore(flags); -+ - return ret; - } - - static int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val) - { - struct mdiobb_ctrl *ctrl = bus->priv; -+ unsigned long flags; - -+ local_irq_save(flags); - if (reg & MII_ADDR_C45) { - reg = mdiobb_cmd_addr(ctrl, phy, reg); - mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg); -@@ -190,6 +197,8 @@ static int mdiobb_write(struct mii_bus * - - ctrl->ops->set_mdio_dir(ctrl, 0); - mdiobb_get_bit(ctrl); -+ local_irq_restore(flags); -+ - return 0; - } - diff --git a/target/linux/ath79/patches-4.14/902-at803x-add-reset-gpio-pdata.patch b/target/linux/ath79/patches-4.14/902-at803x-add-reset-gpio-pdata.patch deleted file mode 100644 index 7822158..0000000 --- a/target/linux/ath79/patches-4.14/902-at803x-add-reset-gpio-pdata.patch +++ /dev/null @@ -1,68 +0,0 @@ -Add support for configuring AT803x GPIO reset via platform data. -This is necessary, because ath79 is not converted to device tree yet. - -Signed-off-by: Felix Fietkau <nbd@nbd.name> - ---- a/include/linux/platform_data/phy-at803x.h -+++ b/include/linux/platform_data/phy-at803x.h -@@ -6,6 +6,8 @@ struct at803x_platform_data { - int enable_rgmii_tx_delay:1; - int enable_rgmii_rx_delay:1; - int fixup_rgmii_tx_delay:1; -+ int has_reset_gpio:1; -+ int reset_gpio; - }; - - #endif /* _PHY_AT803X_PDATA_H */ ---- a/drivers/net/phy/at803x.c -+++ b/drivers/net/phy/at803x.c -@@ -261,6 +261,7 @@ static int at803x_resume(struct phy_devi - - static int at803x_probe(struct phy_device *phydev) - { -+ struct at803x_platform_data *pdata; - struct device *dev = &phydev->mdio.dev; - struct at803x_priv *priv; - struct gpio_desc *gpiod_reset; -@@ -273,6 +274,12 @@ static int at803x_probe(struct phy_devic - phydev->drv->phy_id != ATH8032_PHY_ID) - goto does_not_require_reset_workaround; - -+ pdata = dev_get_platdata(dev); -+ if (pdata && pdata->has_reset_gpio) { -+ devm_gpio_request(dev, pdata->reset_gpio, "reset"); -+ gpio_direction_output(pdata->reset_gpio, 1); -+ } -+ - gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); - if (IS_ERR(gpiod_reset)) - return PTR_ERR(gpiod_reset); -@@ -404,15 +411,23 @@ static void at803x_link_change_notify(st - * cannot recover from by software. - */ - if (phydev->state == PHY_NOLINK) { -- if (priv->gpiod_reset && !priv->phy_reset) { -+ if ((priv->gpiod_reset || (pdata && pdata->has_reset_gpio)) && -+ !priv->phy_reset) { - struct at803x_context context; - - at803x_context_save(phydev, &context); - -- gpiod_set_value(priv->gpiod_reset, 1); -- msleep(1); -- gpiod_set_value(priv->gpiod_reset, 0); -- msleep(1); -+ if (pdata && pdata->has_reset_gpio) { -+ gpio_set_value_cansleep(pdata->reset_gpio, 0); -+ msleep(1); -+ gpio_set_value_cansleep(pdata->reset_gpio, 1); -+ msleep(1); -+ } else { -+ gpiod_set_value(priv->gpiod_reset, 1); -+ msleep(1); -+ gpiod_set_value(priv->gpiod_reset, 0); -+ msleep(1); -+ } - - at803x_context_restore(phydev, &context); - diff --git a/target/linux/ath79/patches-4.14/910-unaligned_access_hacks.patch b/target/linux/ath79/patches-4.14/910-unaligned_access_hacks.patch deleted file mode 100644 index e2ca932..0000000 --- a/target/linux/ath79/patches-4.14/910-unaligned_access_hacks.patch +++ /dev/null @@ -1,900 +0,0 @@ ---- a/arch/mips/include/asm/checksum.h -+++ b/arch/mips/include/asm/checksum.h -@@ -134,26 +134,30 @@ static inline __sum16 ip_fast_csum(const - const unsigned int *stop = word + ihl; - unsigned int csum; - int carry; -+ unsigned int w; - -- csum = word[0]; -- csum += word[1]; -- carry = (csum < word[1]); -+ csum = net_hdr_word(word++); -+ -+ w = net_hdr_word(word++); -+ csum += w; -+ carry = (csum < w); - csum += carry; - -- csum += word[2]; -- carry = (csum < word[2]); -+ w = net_hdr_word(word++); -+ csum += w; -+ carry = (csum < w); - csum += carry; - -- csum += word[3]; -- carry = (csum < word[3]); -+ w = net_hdr_word(word++); -+ csum += w; -+ carry = (csum < w); - csum += carry; - -- word += 4; - do { -- csum += *word; -- carry = (csum < *word); -+ w = net_hdr_word(word++); -+ csum += w; -+ carry = (csum < w); - csum += carry; -- word++; - } while (word != stop); - - return csum_fold(csum); -@@ -214,73 +218,6 @@ static inline __sum16 ip_compute_csum(co - return csum_fold(csum_partial(buff, len, 0)); - } - --#define _HAVE_ARCH_IPV6_CSUM --static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, -- const struct in6_addr *daddr, -- __u32 len, __u8 proto, -- __wsum sum) --{ -- __wsum tmp; -- -- __asm__( -- " .set push # csum_ipv6_magic\n" -- " .set noreorder \n" -- " .set noat \n" -- " addu %0, %5 # proto (long in network byte order)\n" -- " sltu $1, %0, %5 \n" -- " addu %0, $1 \n" -- -- " addu %0, %6 # csum\n" -- " sltu $1, %0, %6 \n" -- " lw %1, 0(%2) # four words source address\n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 4(%2) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 8(%2) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 12(%2) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 0(%3) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 4(%3) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 8(%3) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 12(%3) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " addu %0, $1 # Add final carry\n" -- " .set pop" -- : "=&r" (sum), "=&r" (tmp) -- : "r" (saddr), "r" (daddr), -- "0" (htonl(len)), "r" (htonl(proto)), "r" (sum)); -- -- return csum_fold(sum); --} -- - #include <asm-generic/checksum.h> - #endif /* CONFIG_GENERIC_CSUM */ - ---- a/include/uapi/linux/ip.h -+++ b/include/uapi/linux/ip.h -@@ -103,7 +103,7 @@ struct iphdr { - __be32 saddr; - __be32 daddr; - /*The options start here. */ --}; -+} __attribute__((packed, aligned(2))); - - - struct ip_auth_hdr { ---- a/include/uapi/linux/ipv6.h -+++ b/include/uapi/linux/ipv6.h -@@ -131,7 +131,7 @@ struct ipv6hdr { - - struct in6_addr saddr; - struct in6_addr daddr; --}; -+} __attribute__((packed, aligned(2))); - - - /* index values for the variables in ipv6_devconf */ ---- a/include/uapi/linux/tcp.h -+++ b/include/uapi/linux/tcp.h -@@ -55,7 +55,7 @@ struct tcphdr { - __be16 window; - __sum16 check; - __be16 urg_ptr; --}; -+} __attribute__((packed, aligned(2))); - - /* - * The union cast uses a gcc extension to avoid aliasing problems -@@ -65,7 +65,7 @@ struct tcphdr { - union tcp_word_hdr { - struct tcphdr hdr; - __be32 words[5]; --}; -+} __attribute__((packed, aligned(2))); - - #define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) - ---- a/include/uapi/linux/udp.h -+++ b/include/uapi/linux/udp.h -@@ -25,7 +25,7 @@ struct udphdr { - __be16 dest; - __be16 len; - __sum16 check; --}; -+} __attribute__((packed, aligned(2))); - - /* UDP socket options */ - #define UDP_CORK 1 /* Never send partially complete segments */ ---- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c -+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c -@@ -48,8 +48,8 @@ static bool ipv4_pkt_to_tuple(const stru - if (ap == NULL) - return false; - -- tuple->src.u3.ip = ap[0]; -- tuple->dst.u3.ip = ap[1]; -+ tuple->src.u3.ip = net_hdr_word(ap++); -+ tuple->dst.u3.ip = net_hdr_word(ap); - - return true; - } ---- a/include/uapi/linux/icmp.h -+++ b/include/uapi/linux/icmp.h -@@ -82,7 +82,7 @@ struct icmphdr { - } frag; - __u8 reserved[4]; - } un; --}; -+} __attribute__((packed, aligned(2))); - - - /* ---- a/include/uapi/linux/in6.h -+++ b/include/uapi/linux/in6.h -@@ -43,7 +43,7 @@ struct in6_addr { - #define s6_addr16 in6_u.u6_addr16 - #define s6_addr32 in6_u.u6_addr32 - #endif --}; -+} __attribute__((packed, aligned(2))); - #endif /* __UAPI_DEF_IN6_ADDR */ - - #if __UAPI_DEF_SOCKADDR_IN6 ---- a/net/ipv6/tcp_ipv6.c -+++ b/net/ipv6/tcp_ipv6.c -@@ -39,6 +39,7 @@ - #include <linux/ipsec.h> - #include <linux/times.h> - #include <linux/slab.h> -+#include <asm/unaligned.h> - #include <linux/uaccess.h> - #include <linux/ipv6.h> - #include <linux/icmpv6.h> -@@ -819,10 +820,10 @@ static void tcp_v6_send_response(const s - topt = (__be32 *)(t1 + 1); - - if (tsecr) { -- *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | -- (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP); -- *topt++ = htonl(tsval); -- *topt++ = htonl(tsecr); -+ put_unaligned_be32((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | -+ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP, topt++); -+ put_unaligned_be32(tsval, topt++); -+ put_unaligned_be32(tsecr, topt++); - } - - #ifdef CONFIG_TCP_MD5SIG ---- a/include/linux/ipv6.h -+++ b/include/linux/ipv6.h -@@ -6,6 +6,7 @@ - - #define ipv6_optlen(p) (((p)->hdrlen+1) << 3) - #define ipv6_authlen(p) (((p)->hdrlen+2) << 2) -+ - /* - * This structure contains configuration options per IPv6 link. - */ ---- a/net/ipv6/datagram.c -+++ b/net/ipv6/datagram.c -@@ -485,7 +485,7 @@ int ipv6_recv_error(struct sock *sk, str - ipv6_iface_scope_id(&sin->sin6_addr, - IP6CB(skb)->iif); - } else { -- ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset), -+ ipv6_addr_set_v4mapped(net_hdr_word(nh + serr->addr_offset), - &sin->sin6_addr); - sin->sin6_scope_id = 0; - } -@@ -833,12 +833,12 @@ int ip6_datagram_send_ctl(struct net *ne - } - - if (fl6->flowlabel&IPV6_FLOWINFO_MASK) { -- if ((fl6->flowlabel^*(__be32 *)CMSG_DATA(cmsg))&~IPV6_FLOWINFO_MASK) { -+ if ((fl6->flowlabel^net_hdr_word(CMSG_DATA(cmsg)))&~IPV6_FLOWINFO_MASK) { - err = -EINVAL; - goto exit_f; - } - } -- fl6->flowlabel = IPV6_FLOWINFO_MASK & *(__be32 *)CMSG_DATA(cmsg); -+ fl6->flowlabel = IPV6_FLOWINFO_MASK & net_hdr_word(CMSG_DATA(cmsg)); - break; - - case IPV6_2292HOPOPTS: ---- a/net/ipv6/ip6_gre.c -+++ b/net/ipv6/ip6_gre.c -@@ -397,7 +397,7 @@ static void ip6gre_err(struct sk_buff *s - return; - ipv6h = (const struct ipv6hdr *)skb->data; - greh = (const struct gre_base_hdr *)(skb->data + offset); -- key = key_off ? *(__be32 *)(skb->data + key_off) : 0; -+ key = key_off ? net_hdr_word((__be32 *)(skb->data + key_off)) : 0; - - t = ip6gre_tunnel_lookup(skb->dev, &ipv6h->daddr, &ipv6h->saddr, - key, greh->protocol); ---- a/net/ipv6/exthdrs.c -+++ b/net/ipv6/exthdrs.c -@@ -733,7 +733,7 @@ static bool ipv6_hop_jumbo(struct sk_buf - goto drop; - } - -- pkt_len = ntohl(*(__be32 *)(nh + optoff + 2)); -+ pkt_len = ntohl(net_hdr_word(nh + optoff + 2)); - if (pkt_len <= IPV6_MAXPLEN) { - __IP6_INC_STATS(net, ipv6_skb_idev(skb), - IPSTATS_MIB_INHDRERRORS); ---- a/include/linux/types.h -+++ b/include/linux/types.h -@@ -229,5 +229,11 @@ struct callback_head { - typedef void (*rcu_callback_t)(struct rcu_head *head); - typedef void (*call_rcu_func_t)(struct rcu_head *head, rcu_callback_t func); - -+struct net_hdr_word { -+ u32 words[1]; -+} __attribute__((packed, aligned(2))); -+ -+#define net_hdr_word(_p) (((struct net_hdr_word *) (_p))->words[0]) -+ - #endif /* __ASSEMBLY__ */ - #endif /* _LINUX_TYPES_H */ ---- a/net/ipv4/af_inet.c -+++ b/net/ipv4/af_inet.c -@@ -1351,8 +1351,8 @@ struct sk_buff **inet_gro_receive(struct - if (unlikely(ip_fast_csum((u8 *)iph, 5))) - goto out_unlock; - -- id = ntohl(*(__be32 *)&iph->id); -- flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (id & ~IP_DF)); -+ id = ntohl(net_hdr_word(&iph->id)); -+ flush = (u16)((ntohl(net_hdr_word(iph)) ^ skb_gro_len(skb)) | (id & ~IP_DF)); - id >>= 16; - - for (p = *head; p; p = p->next) { ---- a/net/ipv4/route.c -+++ b/net/ipv4/route.c -@@ -465,7 +465,7 @@ static struct neighbour *ipv4_neigh_look - else if (skb) - pkey = &ip_hdr(skb)->daddr; - -- n = __ipv4_neigh_lookup(dev, *(__force u32 *)pkey); -+ n = __ipv4_neigh_lookup(dev, net_hdr_word(pkey)); - if (n) - return n; - return neigh_create(&arp_tbl, pkey, dev); ---- a/net/ipv4/tcp_output.c -+++ b/net/ipv4/tcp_output.c -@@ -449,48 +449,53 @@ static void tcp_options_write(__be32 *pt - u16 options = opts->options; /* mungable copy */ - - if (unlikely(OPTION_MD5 & options)) { -- *ptr++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | -- (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | -+ (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG); - /* overload cookie hash location */ - opts->hash_location = (__u8 *)ptr; - ptr += 4; - } - - if (unlikely(opts->mss)) { -- *ptr++ = htonl((TCPOPT_MSS << 24) | -- (TCPOLEN_MSS << 16) | -- opts->mss); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_MSS << 24) | (TCPOLEN_MSS << 16) | -+ opts->mss); - } - - if (likely(OPTION_TS & options)) { - if (unlikely(OPTION_SACK_ADVERTISE & options)) { -- *ptr++ = htonl((TCPOPT_SACK_PERM << 24) | -- (TCPOLEN_SACK_PERM << 16) | -- (TCPOPT_TIMESTAMP << 8) | -- TCPOLEN_TIMESTAMP); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_SACK_PERM << 24) | -+ (TCPOLEN_SACK_PERM << 16) | -+ (TCPOPT_TIMESTAMP << 8) | -+ TCPOLEN_TIMESTAMP); - options &= ~OPTION_SACK_ADVERTISE; - } else { -- *ptr++ = htonl((TCPOPT_NOP << 24) | -- (TCPOPT_NOP << 16) | -- (TCPOPT_TIMESTAMP << 8) | -- TCPOLEN_TIMESTAMP); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_NOP << 24) | -+ (TCPOPT_NOP << 16) | -+ (TCPOPT_TIMESTAMP << 8) | -+ TCPOLEN_TIMESTAMP); - } -- *ptr++ = htonl(opts->tsval); -- *ptr++ = htonl(opts->tsecr); -+ net_hdr_word(ptr++) = htonl(opts->tsval); -+ net_hdr_word(ptr++) = htonl(opts->tsecr); - } - - if (unlikely(OPTION_SACK_ADVERTISE & options)) { -- *ptr++ = htonl((TCPOPT_NOP << 24) | -- (TCPOPT_NOP << 16) | -- (TCPOPT_SACK_PERM << 8) | -- TCPOLEN_SACK_PERM); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_NOP << 24) | -+ (TCPOPT_NOP << 16) | -+ (TCPOPT_SACK_PERM << 8) | -+ TCPOLEN_SACK_PERM); - } - - if (unlikely(OPTION_WSCALE & options)) { -- *ptr++ = htonl((TCPOPT_NOP << 24) | -- (TCPOPT_WINDOW << 16) | -- (TCPOLEN_WINDOW << 8) | -- opts->ws); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_NOP << 24) | -+ (TCPOPT_WINDOW << 16) | -+ (TCPOLEN_WINDOW << 8) | -+ opts->ws); - } - - if (unlikely(opts->num_sack_blocks)) { -@@ -498,16 +503,17 @@ static void tcp_options_write(__be32 *pt - tp->duplicate_sack : tp->selective_acks; - int this_sack; - -- *ptr++ = htonl((TCPOPT_NOP << 24) | -- (TCPOPT_NOP << 16) | -- (TCPOPT_SACK << 8) | -- (TCPOLEN_SACK_BASE + (opts->num_sack_blocks * -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_NOP << 24) | -+ (TCPOPT_NOP << 16) | -+ (TCPOPT_SACK << 8) | -+ (TCPOLEN_SACK_BASE + (opts->num_sack_blocks * - TCPOLEN_SACK_PERBLOCK))); - - for (this_sack = 0; this_sack < opts->num_sack_blocks; - ++this_sack) { -- *ptr++ = htonl(sp[this_sack].start_seq); -- *ptr++ = htonl(sp[this_sack].end_seq); -+ net_hdr_word(ptr++) = htonl(sp[this_sack].start_seq); -+ net_hdr_word(ptr++) = htonl(sp[this_sack].end_seq); - } - - tp->rx_opt.dsack = 0; -@@ -520,13 +526,14 @@ static void tcp_options_write(__be32 *pt - - if (foc->exp) { - len = TCPOLEN_EXP_FASTOPEN_BASE + foc->len; -- *ptr = htonl((TCPOPT_EXP << 24) | (len << 16) | -+ net_hdr_word(ptr) = -+ htonl((TCPOPT_EXP << 24) | (len << 16) | - TCPOPT_FASTOPEN_MAGIC); - p += TCPOLEN_EXP_FASTOPEN_BASE; - } else { - len = TCPOLEN_FASTOPEN_BASE + foc->len; -- *p++ = TCPOPT_FASTOPEN; -- *p++ = len; -+ net_hdr_word(p++) = TCPOPT_FASTOPEN; -+ net_hdr_word(p++) = len; - } - - memcpy(p, foc->val, foc->len); ---- a/include/uapi/linux/igmp.h -+++ b/include/uapi/linux/igmp.h -@@ -33,7 +33,7 @@ struct igmphdr { - __u8 code; /* For newer IGMP */ - __sum16 csum; - __be32 group; --}; -+} __attribute__((packed, aligned(2))); - - /* V3 group record types [grec_type] */ - #define IGMPV3_MODE_IS_INCLUDE 1 -@@ -49,7 +49,7 @@ struct igmpv3_grec { - __be16 grec_nsrcs; - __be32 grec_mca; - __be32 grec_src[0]; --}; -+} __attribute__((packed, aligned(2))); - - struct igmpv3_report { - __u8 type; -@@ -58,7 +58,7 @@ struct igmpv3_report { - __be16 resv2; - __be16 ngrec; - struct igmpv3_grec grec[0]; --}; -+} __attribute__((packed, aligned(2))); - - struct igmpv3_query { - __u8 type; -@@ -79,7 +79,7 @@ struct igmpv3_query { - __u8 qqic; - __be16 nsrcs; - __be32 srcs[0]; --}; -+} __attribute__((packed, aligned(2))); - - #define IGMP_HOST_MEMBERSHIP_QUERY 0x11 /* From RFC1112 */ - #define IGMP_HOST_MEMBERSHIP_REPORT 0x12 /* Ditto */ ---- a/net/core/flow_dissector.c -+++ b/net/core/flow_dissector.c -@@ -108,7 +108,7 @@ __be32 __skb_flow_get_ports(const struct - ports = __skb_header_pointer(skb, thoff + poff, - sizeof(_ports), data, hlen, &_ports); - if (ports) -- return *ports; -+ return (__be32)net_hdr_word(ports); - } - - return 0; ---- a/include/uapi/linux/icmpv6.h -+++ b/include/uapi/linux/icmpv6.h -@@ -77,7 +77,7 @@ struct icmp6hdr { - #define icmp6_addrconf_other icmp6_dataun.u_nd_ra.other - #define icmp6_rt_lifetime icmp6_dataun.u_nd_ra.rt_lifetime - #define icmp6_router_pref icmp6_dataun.u_nd_ra.router_pref --}; -+} __attribute__((packed, aligned(2))); - - - #define ICMPV6_ROUTER_PREF_LOW 0x3 ---- a/include/net/ndisc.h -+++ b/include/net/ndisc.h -@@ -89,7 +89,7 @@ struct ra_msg { - struct icmp6hdr icmph; - __be32 reachable_time; - __be32 retrans_timer; --}; -+} __attribute__((packed, aligned(2))); - - struct rd_msg { - struct icmp6hdr icmph; -@@ -368,10 +368,10 @@ static inline u32 ndisc_hashfn(const voi - { - const u32 *p32 = pkey; - -- return (((p32[0] ^ hash32_ptr(dev)) * hash_rnd[0]) + -- (p32[1] * hash_rnd[1]) + -- (p32[2] * hash_rnd[2]) + -- (p32[3] * hash_rnd[3])); -+ return (((net_hdr_word(&p32[0]) ^ hash32_ptr(dev)) * hash_rnd[0]) + -+ (net_hdr_word(&p32[1]) * hash_rnd[1]) + -+ (net_hdr_word(&p32[2]) * hash_rnd[2]) + -+ (net_hdr_word(&p32[3]) * hash_rnd[3])); - } - - static inline struct neighbour *__ipv6_neigh_lookup_noref(struct net_device *dev, const void *pkey) ---- a/net/sched/cls_u32.c -+++ b/net/sched/cls_u32.c -@@ -165,7 +165,7 @@ next_knode: - data = skb_header_pointer(skb, toff, 4, &hdata); - if (!data) - goto out; -- if ((*data ^ key->val) & key->mask) { -+ if ((net_hdr_word(data) ^ key->val) & key->mask) { - n = rcu_dereference_bh(n->next); - goto next_knode; - } -@@ -218,8 +218,8 @@ check_terminal: - &hdata); - if (!data) - goto out; -- sel = ht->divisor & u32_hash_fold(*data, &n->sel, -- n->fshift); -+ sel = ht->divisor & u32_hash_fold(net_hdr_word(data), -+ &n->sel, n->fshift); - } - if (!(n->sel.flags & (TC_U32_VAROFFSET | TC_U32_OFFSET | TC_U32_EAT))) - goto next_ht; ---- a/net/ipv6/ip6_offload.c -+++ b/net/ipv6/ip6_offload.c -@@ -220,7 +220,7 @@ static struct sk_buff **ipv6_gro_receive - continue; - - iph2 = (struct ipv6hdr *)(p->data + off); -- first_word = *(__be32 *)iph ^ *(__be32 *)iph2; -+ first_word = net_hdr_word(iph) ^ net_hdr_word(iph2); - - /* All fields must match except length and Traffic Class. - * XXX skbs on the gro_list have all been parsed and pulled ---- a/include/net/addrconf.h -+++ b/include/net/addrconf.h -@@ -47,7 +47,7 @@ struct prefix_info { - __be32 reserved2; - - struct in6_addr prefix; --}; -+} __attribute__((packed, aligned(2))); - - #include <linux/netdevice.h> - #include <net/if_inet6.h> ---- a/include/net/inet_ecn.h -+++ b/include/net/inet_ecn.h -@@ -125,9 +125,9 @@ static inline int IP6_ECN_set_ce(struct - if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph))) - return 0; - -- from = *(__be32 *)iph; -+ from = net_hdr_word(iph); - to = from | htonl(INET_ECN_CE << 20); -- *(__be32 *)iph = to; -+ net_hdr_word(iph) = to; - if (skb->ip_summed == CHECKSUM_COMPLETE) - skb->csum = csum_add(csum_sub(skb->csum, (__force __wsum)from), - (__force __wsum)to); -@@ -136,7 +136,7 @@ static inline int IP6_ECN_set_ce(struct - - static inline void IP6_ECN_clear(struct ipv6hdr *iph) - { -- *(__be32*)iph &= ~htonl(INET_ECN_MASK << 20); -+ net_hdr_word(iph) &= ~htonl(INET_ECN_MASK << 20); - } - - static inline void ipv6_copy_dscp(unsigned int dscp, struct ipv6hdr *inner) ---- a/include/net/ipv6.h -+++ b/include/net/ipv6.h -@@ -108,7 +108,7 @@ struct frag_hdr { - __u8 reserved; - __be16 frag_off; - __be32 identification; --}; -+} __attribute__((packed, aligned(2))); - - #define IP6_MF 0x0001 - #define IP6_OFFSET 0xFFF8 -@@ -451,8 +451,8 @@ static inline void __ipv6_addr_set_half( - } - #endif - #endif -- addr[0] = wh; -- addr[1] = wl; -+ net_hdr_word(&addr[0]) = wh; -+ net_hdr_word(&addr[1]) = wl; - } - - static inline void ipv6_addr_set(struct in6_addr *addr, -@@ -511,6 +511,8 @@ static inline bool ipv6_prefix_equal(con - const __be32 *a1 = addr1->s6_addr32; - const __be32 *a2 = addr2->s6_addr32; - unsigned int pdw, pbi; -+ /* Used for last <32-bit fraction of prefix */ -+ u32 pbia1, pbia2; - - /* check complete u32 in prefix */ - pdw = prefixlen >> 5; -@@ -519,7 +521,9 @@ static inline bool ipv6_prefix_equal(con - - /* check incomplete u32 in prefix */ - pbi = prefixlen & 0x1f; -- if (pbi && ((a1[pdw] ^ a2[pdw]) & htonl((0xffffffff) << (32 - pbi)))) -+ pbia1 = net_hdr_word(&a1[pdw]); -+ pbia2 = net_hdr_word(&a2[pdw]); -+ if (pbi && ((pbia1 ^ pbia2) & htonl((0xffffffff) << (32 - pbi)))) - return false; - - return true; -@@ -663,13 +667,13 @@ static inline void ipv6_addr_set_v4mappe - */ - static inline int __ipv6_addr_diff32(const void *token1, const void *token2, int addrlen) - { -- const __be32 *a1 = token1, *a2 = token2; -+ const struct in6_addr *a1 = token1, *a2 = token2; - int i; - - addrlen >>= 2; - - for (i = 0; i < addrlen; i++) { -- __be32 xb = a1[i] ^ a2[i]; -+ __be32 xb = a1->s6_addr32[i] ^ a2->s6_addr32[i]; - if (xb) - return i * 32 + 31 - __fls(ntohl(xb)); - } -@@ -838,17 +842,18 @@ static inline int ip6_default_np_autolab - static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass, - __be32 flowlabel) - { -- *(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | flowlabel; -+ net_hdr_word((__be32 *)hdr) = -+ htonl(0x60000000 | (tclass << 20)) | flowlabel; - } - - static inline __be32 ip6_flowinfo(const struct ipv6hdr *hdr) - { -- return *(__be32 *)hdr & IPV6_FLOWINFO_MASK; -+ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWINFO_MASK; - } - - static inline __be32 ip6_flowlabel(const struct ipv6hdr *hdr) - { -- return *(__be32 *)hdr & IPV6_FLOWLABEL_MASK; -+ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWLABEL_MASK; - } - - static inline u8 ip6_tclass(__be32 flowinfo) ---- a/include/net/secure_seq.h -+++ b/include/net/secure_seq.h -@@ -3,6 +3,7 @@ - #define _NET_SECURE_SEQ - - #include <linux/types.h> -+#include <linux/in6.h> - - u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport); - u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr, ---- a/include/uapi/linux/in.h -+++ b/include/uapi/linux/in.h -@@ -84,7 +84,7 @@ enum { - /* Internet address. */ - struct in_addr { - __be32 s_addr; --}; -+} __attribute__((packed, aligned(2))); - #endif - - #define IP_TOS 1 ---- a/net/ipv6/ip6_fib.c -+++ b/net/ipv6/ip6_fib.c -@@ -137,7 +137,7 @@ static __be32 addr_bit_set(const void *t - * See include/asm-generic/bitops/le.h. - */ - return (__force __be32)(1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)) & -- addr[fn_bit >> 5]; -+ net_hdr_word(&addr[fn_bit >> 5]); - } - - static struct fib6_node *node_alloc(void) ---- a/net/netfilter/nf_conntrack_proto_tcp.c -+++ b/net/netfilter/nf_conntrack_proto_tcp.c -@@ -447,7 +447,7 @@ static void tcp_sack(const struct sk_buf - - /* Fast path for timestamp-only option */ - if (length == TCPOLEN_TSTAMP_ALIGNED -- && *(__be32 *)ptr == htonl((TCPOPT_NOP << 24) -+ && net_hdr_word(ptr) == htonl((TCPOPT_NOP << 24) - | (TCPOPT_NOP << 16) - | (TCPOPT_TIMESTAMP << 8) - | TCPOLEN_TIMESTAMP)) ---- a/net/xfrm/xfrm_input.c -+++ b/net/xfrm/xfrm_input.c -@@ -187,8 +187,8 @@ int xfrm_parse_spi(struct sk_buff *skb, - if (!pskb_may_pull(skb, hlen)) - return -EINVAL; - -- *spi = *(__be32 *)(skb_transport_header(skb) + offset); -- *seq = *(__be32 *)(skb_transport_header(skb) + offset_seq); -+ *spi = net_hdr_word(skb_transport_header(skb) + offset); -+ *seq = net_hdr_word(skb_transport_header(skb) + offset_seq); - return 0; - } - EXPORT_SYMBOL(xfrm_parse_spi); ---- a/net/ipv4/tcp_input.c -+++ b/net/ipv4/tcp_input.c -@@ -3842,14 +3842,16 @@ static bool tcp_parse_aligned_timestamp( - { - const __be32 *ptr = (const __be32 *)(th + 1); - -- if (*ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) -- | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) { -+ if (net_hdr_word(ptr) == -+ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | -+ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) { - tp->rx_opt.saw_tstamp = 1; - ++ptr; -- tp->rx_opt.rcv_tsval = ntohl(*ptr); -+ tp->rx_opt.rcv_tsval = get_unaligned_be32(ptr); - ++ptr; -- if (*ptr) -- tp->rx_opt.rcv_tsecr = ntohl(*ptr) - tp->tsoffset; -+ if (net_hdr_word(ptr)) -+ tp->rx_opt.rcv_tsecr = get_unaligned_be32(ptr) - -+ tp->tsoffset; - else - tp->rx_opt.rcv_tsecr = 0; - return true; ---- a/include/uapi/linux/if_pppox.h -+++ b/include/uapi/linux/if_pppox.h -@@ -51,6 +51,7 @@ struct pppoe_addr { - */ - struct pptp_addr { - __u16 call_id; -+ __u16 pad; - struct in_addr sin_addr; - }; - ---- a/net/ipv6/netfilter/nf_log_ipv6.c -+++ b/net/ipv6/netfilter/nf_log_ipv6.c -@@ -66,9 +66,9 @@ static void dump_ipv6_packet(struct nf_l - /* Max length: 44 "LEN=65535 TC=255 HOPLIMIT=255 FLOWLBL=FFFFF " */ - nf_log_buf_add(m, "LEN=%zu TC=%u HOPLIMIT=%u FLOWLBL=%u ", - ntohs(ih->payload_len) + sizeof(struct ipv6hdr), -- (ntohl(*(__be32 *)ih) & 0x0ff00000) >> 20, -+ (ntohl(net_hdr_word(ih)) & 0x0ff00000) >> 20, - ih->hop_limit, -- (ntohl(*(__be32 *)ih) & 0x000fffff)); -+ (ntohl(net_hdr_word(ih)) & 0x000fffff)); - - fragment = 0; - ptr = ip6hoff + sizeof(struct ipv6hdr); ---- a/include/net/neighbour.h -+++ b/include/net/neighbour.h -@@ -265,8 +265,10 @@ static inline bool neigh_key_eq128(const - const u32 *n32 = (const u32 *)n->primary_key; - const u32 *p32 = pkey; - -- return ((n32[0] ^ p32[0]) | (n32[1] ^ p32[1]) | -- (n32[2] ^ p32[2]) | (n32[3] ^ p32[3])) == 0; -+ return ((n32[0] ^ net_hdr_word(&p32[0])) | -+ (n32[1] ^ net_hdr_word(&p32[1])) | -+ (n32[2] ^ net_hdr_word(&p32[2])) | -+ (n32[3] ^ net_hdr_word(&p32[3]))) == 0; - } - - static inline struct neighbour *___neigh_lookup_noref( ---- a/include/uapi/linux/netfilter_arp/arp_tables.h -+++ b/include/uapi/linux/netfilter_arp/arp_tables.h -@@ -70,7 +70,7 @@ struct arpt_arp { - __u8 flags; - /* Inverse flags */ - __u16 invflags; --}; -+} __attribute__((aligned(4))); - - /* Values for "flag" field in struct arpt_ip (general arp structure). - * No flags defined yet. ---- a/net/core/utils.c -+++ b/net/core/utils.c -@@ -424,8 +424,14 @@ void inet_proto_csum_replace16(__sum16 * - bool pseudohdr) - { - __be32 diff[] = { -- ~from[0], ~from[1], ~from[2], ~from[3], -- to[0], to[1], to[2], to[3], -+ ~net_hdr_word(&from[0]), -+ ~net_hdr_word(&from[1]), -+ ~net_hdr_word(&from[2]), -+ ~net_hdr_word(&from[3]), -+ net_hdr_word(&to[0]), -+ net_hdr_word(&to[1]), -+ net_hdr_word(&to[2]), -+ net_hdr_word(&to[3]), - }; - if (skb->ip_summed != CHECKSUM_PARTIAL) { - *sum = csum_fold(csum_partial(diff, sizeof(diff), ---- a/include/linux/etherdevice.h -+++ b/include/linux/etherdevice.h -@@ -480,7 +480,7 @@ static inline bool is_etherdev_addr(cons - * @b: Pointer to Ethernet header - * - * Compare two Ethernet headers, returns 0 if equal. -- * This assumes that the network header (i.e., IP header) is 4-byte -+ * This assumes that the network header (i.e., IP header) is 2-byte - * aligned OR the platform can handle unaligned access. This is the - * case for all packets coming into netif_receive_skb or similar - * entry points. -@@ -503,11 +503,12 @@ static inline unsigned long compare_ethe - fold |= *(unsigned long *)(a + 6) ^ *(unsigned long *)(b + 6); - return fold; - #else -- u32 *a32 = (u32 *)((u8 *)a + 2); -- u32 *b32 = (u32 *)((u8 *)b + 2); -+ const u16 *a16 = a; -+ const u16 *b16 = b; - -- return (*(u16 *)a ^ *(u16 *)b) | (a32[0] ^ b32[0]) | -- (a32[1] ^ b32[1]) | (a32[2] ^ b32[2]); -+ return (a16[0] ^ b16[0]) | (a16[1] ^ b16[1]) | (a16[2] ^ b16[2]) | -+ (a16[3] ^ b16[3]) | (a16[4] ^ b16[4]) | (a16[5] ^ b16[5]) | -+ (a16[6] ^ b16[6]); - #endif - } - ---- a/net/ipv4/tcp_offload.c -+++ b/net/ipv4/tcp_offload.c -@@ -226,7 +226,7 @@ struct sk_buff **tcp_gro_receive(struct - - th2 = tcp_hdr(p); - -- if (*(u32 *)&th->source ^ *(u32 *)&th2->source) { -+ if (net_hdr_word(&th->source) ^ net_hdr_word(&th2->source)) { - NAPI_GRO_CB(p)->same_flow = 0; - continue; - } -@@ -244,8 +244,8 @@ found: - ~(TCP_FLAG_CWR | TCP_FLAG_FIN | TCP_FLAG_PSH)); - flush |= (__force int)(th->ack_seq ^ th2->ack_seq); - for (i = sizeof(*th); i < thlen; i += 4) -- flush |= *(u32 *)((u8 *)th + i) ^ -- *(u32 *)((u8 *)th2 + i); -+ flush |= net_hdr_word((u8 *)th + i) ^ -+ net_hdr_word((u8 *)th2 + i); - - /* When we receive our second frame we can made a decision on if we - * continue this flow as an atomic flow with a fixed ID or if we use ---- a/net/ipv6/netfilter/ip6table_mangle.c -+++ b/net/ipv6/netfilter/ip6table_mangle.c -@@ -50,7 +50,7 @@ ip6t_mangle_out(struct sk_buff *skb, con - hop_limit = ipv6_hdr(skb)->hop_limit; - - /* flowlabel and prio (includes version, which shouldn't change either */ -- flowlabel = *((u_int32_t *)ipv6_hdr(skb)); -+ flowlabel = net_hdr_word(ipv6_hdr(skb)); - - ret = ip6t_do_table(skb, state, state->net->ipv6.ip6table_mangle); - -@@ -59,7 +59,7 @@ ip6t_mangle_out(struct sk_buff *skb, con - !ipv6_addr_equal(&ipv6_hdr(skb)->daddr, &daddr) || - skb->mark != mark || - ipv6_hdr(skb)->hop_limit != hop_limit || -- flowlabel != *((u_int32_t *)ipv6_hdr(skb)))) { -+ flowlabel != net_hdr_word(ipv6_hdr(skb)))) { - err = ip6_route_me_harder(state->net, skb); - if (err < 0) - ret = NF_DROP_ERR(err); |