diff options
Diffstat (limited to 'target')
-rw-r--r-- | target/linux/ar7/patches-3.10/972-cpmac_fixup.patch | 221 |
1 files changed, 0 insertions, 221 deletions
diff --git a/target/linux/ar7/patches-3.10/972-cpmac_fixup.patch b/target/linux/ar7/patches-3.10/972-cpmac_fixup.patch deleted file mode 100644 index db290b4..0000000 --- a/target/linux/ar7/patches-3.10/972-cpmac_fixup.patch +++ /dev/null @@ -1,221 +0,0 @@ ---- a/arch/mips/ar7/platform.c -+++ b/arch/mips/ar7/platform.c -@@ -712,26 +712,23 @@ static int __init ar7_register_devices(v - } - - if (ar7_has_high_cpmac()) { -+ cpmac_get_mac(0, cpmac_high_data.dev_addr); -+ - res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status); -- if (!res) { -- cpmac_get_mac(1, cpmac_high_data.dev_addr); -+ if (!res) -+ pr_warning("unable to register fixed phy for cpmac-high: %d\n", res); - -- res = platform_device_register(&cpmac_high); -- if (res) -- pr_warning("unable to register cpmac-high: %d\n", res); -- } else -- pr_warning("unable to add cpmac-high phy: %d\n", res); -- } else -+ res = platform_device_register(&cpmac_high); -+ if (res) -+ pr_warning("unable to register cpmac-high: %d\n", res); -+ cpmac_get_mac(1, cpmac_low_data.dev_addr); -+ } else { - cpmac_low_data.phy_mask = 0xffffffff; -- -- res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status); -- if (!res) { - cpmac_get_mac(0, cpmac_low_data.dev_addr); -- res = platform_device_register(&cpmac_low); -- if (res) -- pr_warning("unable to register cpmac-low: %d\n", res); -- } else -- pr_warning("unable to add cpmac-low phy: %d\n", res); -+ } -+ res = platform_device_register(&cpmac_low); -+ if (res) -+ pr_warning("unable to register cpmac-low: %d\n", res); - - detect_leds(); - res = platform_device_register(&ar7_gpio_leds); ---- a/arch/mips/include/asm/mach-ar7/ar7.h -+++ b/arch/mips/include/asm/mach-ar7/ar7.h -@@ -42,6 +42,7 @@ - #define AR7_REGS_PINSEL (AR7_REGS_BASE + 0x160C) - #define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800) - #define AR7_REGS_DCL (AR7_REGS_BASE + 0x1a00) -+#define AR7_REGS_MII (AR7_REGS_BASE + 0x1a08) - #define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1c00) - #define AR7_REGS_MDIO (AR7_REGS_BASE + 0x1e00) - #define AR7_REGS_IRQ (AR7_REGS_BASE + 0x2400) ---- a/drivers/net/ethernet/ti/cpmac.c -+++ b/drivers/net/ethernet/ti/cpmac.c -@@ -35,7 +35,6 @@ - #include <linux/skbuff.h> - #include <linux/mii.h> - #include <linux/phy.h> --#include <linux/phy_fixed.h> - #include <linux/platform_device.h> - #include <linux/dma-mapping.h> - #include <linux/clk.h> -@@ -48,14 +47,11 @@ MODULE_LICENSE("GPL"); - MODULE_ALIAS("platform:cpmac"); - - static int debug_level = 8; --static int dumb_switch; - --/* Next 2 are only used in cpmac_probe, so it's pointless to change them */ -+/* Next is only used in cpmac_probe, so it's pointless to change them */ - module_param(debug_level, int, 0444); --module_param(dumb_switch, int, 0444); - - MODULE_PARM_DESC(debug_level, "Number of NETIF_MSG bits to enable"); --MODULE_PARM_DESC(dumb_switch, "Assume switch is not connected to MDIO bus"); - - #define CPMAC_VERSION "0.5.2" - /* frame size + 802.1q tag + FCS size */ -@@ -674,9 +670,8 @@ static void cpmac_hw_start(struct net_de - for (i = 0; i < 8; i++) - cpmac_write(priv->regs, CPMAC_MAC_ADDR_LO(i), dev->dev_addr[5]); - cpmac_write(priv->regs, CPMAC_MAC_ADDR_MID, dev->dev_addr[4]); -- cpmac_write(priv->regs, CPMAC_MAC_ADDR_HI, dev->dev_addr[0] | -- (dev->dev_addr[1] << 8) | (dev->dev_addr[2] << 16) | -- (dev->dev_addr[3] << 24)); -+ cpmac_write(priv->regs, CPMAC_MAC_ADDR_HI, be32_to_cpu(*(u32 *) -+ dev->dev_addr)); - cpmac_write(priv->regs, CPMAC_MAX_LENGTH, CPMAC_SKB_SIZE); - cpmac_write(priv->regs, CPMAC_UNICAST_CLEAR, 0xff); - cpmac_write(priv->regs, CPMAC_RX_INT_CLEAR, 0xff); -@@ -1120,25 +1115,19 @@ static int cpmac_probe(struct platform_d - - pdata = pdev->dev.platform_data; - -- if (external_switch || dumb_switch) { -- strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE); /* fixed phys bus */ -- phy_id = pdev->id; -- } else { -- for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) { -- if (!(pdata->phy_mask & (1 << phy_id))) -- continue; -- if (!cpmac_mii->phy_map[phy_id]) -- continue; -- strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE); -- break; -- } -+ for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) { -+ if (!(pdata->phy_mask & (1 << phy_id))) -+ continue; -+ if (!cpmac_mii->phy_map[phy_id]) -+ continue; -+ strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE); -+ break; - } - -- if (phy_id == PHY_MAX_ADDR) { -- dev_err(&pdev->dev, "no PHY present, falling back " -- "to switch on MDIO bus 0\n"); -- strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE); /* fixed phys bus */ -+ if (phy_id == PHY_MAX_ADDR && pdev->id == 1) { -+ printk(KERN_ERR "cpmac: No PHY present, using fixed PHY\n"); - phy_id = pdev->id; -+ strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE); - } - - dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES); -@@ -1174,6 +1163,13 @@ static int cpmac_probe(struct platform_d - snprintf(priv->phy_name, MII_BUS_ID_SIZE, PHY_ID_FMT, - mdio_bus_id, phy_id); - -+ rc = register_netdev(dev); -+ if (rc) { -+ printk(KERN_ERR "cpmac: error %i registering device %s\n", rc, -+ dev->name); -+ goto fail; -+ } -+ - priv->phy = phy_connect(dev, priv->phy_name, cpmac_adjust_link, - PHY_INTERFACE_MODE_MII); - -@@ -1185,13 +1181,6 @@ static int cpmac_probe(struct platform_d - goto fail; - } - -- rc = register_netdev(dev); -- if (rc) { -- printk(KERN_ERR "cpmac: error %i registering device %s\n", rc, -- dev->name); -- goto fail; -- } -- - if (netif_msg_probe(priv)) { - printk(KERN_INFO - "cpmac: device %s (regs: %p, irq: %d, phy: %s, " -@@ -1224,6 +1213,7 @@ int cpmac_init(void) - { - u32 mask; - int i, res; -+ void __iomem *mii_reg; - - cpmac_mii = mdiobus_alloc(); - if (cpmac_mii == NULL) -@@ -1247,31 +1237,51 @@ int cpmac_init(void) - ar7_gpio_disable(26); - ar7_gpio_disable(27); - -- if (!ar7_is_titan()) { -+ if (ar7_is_titan()) { -+ ar7_device_reset(AR7_RESET_BIT_EPHY); -+ ar7_device_reset(TITAN_RESET_BIT_EPHY1); -+ } else { -+ ar7_device_reset(AR7_RESET_BIT_EPHY); - ar7_device_reset(AR7_RESET_BIT_CPMAC_LO); - ar7_device_reset(AR7_RESET_BIT_CPMAC_HI); - } -- ar7_device_reset(AR7_RESET_BIT_EPHY); -- -- if (ar7_is_titan()) -- ar7_device_reset(TITAN_RESET_BIT_EPHY1); - - cpmac_mii->reset(cpmac_mii); - - for (i = 0; i < 300; i++) { - mask = cpmac_read(cpmac_mii->priv, CPMAC_MDIO_ALIVE); -+ mask &= ar7_is_titan()? ~(0x80000000 | 0x40000000) : ~(0x80000000); - if (mask) - break; - else - msleep(10); - } - -- mask &= 0x7fffffff; - if (mask & (mask - 1)) { - external_switch = 1; -- mask = 0; -+ if (!ar7_has_high_cpmac()) { -+ if (ar7_is_titan()) { -+ ar7_device_disable(AR7_RESET_BIT_EPHY); -+ ar7_device_disable(TITAN_RESET_BIT_EPHY1); -+ } else -+ ar7_device_disable(AR7_RESET_BIT_EPHY); -+ -+ //Titan remap might be different -+ mii_reg = ioremap(AR7_REGS_MII, 4); -+ if (mii_reg) { -+ writel(readl(mii_reg) | 1, mii_reg); -+ iounmap(mii_reg); -+ } -+ } - } - -+ if (external_switch) -+ printk(KERN_INFO "EXTERNAL SWITCH!!!\n"); -+ else if (mask) -+ printk(KERN_INFO "EXTERNAL PHY!!!\n"); -+ else -+ printk(KERN_INFO "INTERNAL PHY!!!\n"); -+ - if (ar7_is_titan()) - cpmac_mii->phy_mask = ~(mask | 0x80000000 | 0x40000000); - else |