diff options
Diffstat (limited to 'target')
5 files changed, 3 insertions, 344 deletions
diff --git a/target/linux/atheros/files/arch/mips/atheros/Makefile b/target/linux/atheros/files/arch/mips/atheros/Makefile index 0d00336..2c2b991 100644 --- a/target/linux/atheros/files/arch/mips/atheros/Makefile +++ b/target/linux/atheros/files/arch/mips/atheros/Makefile @@ -8,6 +8,6 @@ # Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> # -obj-y += board.o prom.o reset.o gpio.o +obj-y += board.o prom.o reset.o obj-$(CONFIG_ATHEROS_AR5312) += ar5312/ obj-$(CONFIG_ATHEROS_AR5315) += ar5315/ diff --git a/target/linux/atheros/files/arch/mips/atheros/ar5312/irq.c b/target/linux/atheros/files/arch/mips/atheros/ar5312/irq.c index e2117a2..0cbdc8e 100644 --- a/target/linux/atheros/files/arch/mips/atheros/ar5312/irq.c +++ b/target/linux/atheros/files/arch/mips/atheros/ar5312/irq.c @@ -55,8 +55,6 @@ asmlinkage void ar5312_irq_dispatch(void) (void)sysRegRead(AR531X_TIMER); } else if (ar531x_misc_intrs & AR531X_ISR_AHBPROC) do_IRQ(AR531X_MISC_IRQ_AHB_PROC); - else if (ar531x_misc_intrs & AR531X_ISR_GPIO) - ar5312_gpio_irq_dispatch(); else if ((ar531x_misc_intrs & AR531X_ISR_UART0)) do_IRQ(AR531X_MISC_IRQ_UART0); else if (ar531x_misc_intrs & AR531X_ISR_WD) diff --git a/target/linux/atheros/files/arch/mips/atheros/gpio.c b/target/linux/atheros/files/arch/mips/atheros/gpio.c deleted file mode 100644 index c51de61..0000000 --- a/target/linux/atheros/files/arch/mips/atheros/gpio.c +++ /dev/null @@ -1,339 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. - * Copyright (C) 2006 FON Technology, SL. - * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> - * Copyright (C) 2007 Othello <bach_ag@hotmail.com> - */ - -/* - * Support for AR531X GPIO -- General Purpose Input/Output Pins - */ - -#include <linux/autoconf.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/types.h> -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/irq.h> - -#include <asm/addrspace.h> -#include <asm/io.h> -#include <asm/irq_cpu.h> -#include <asm/gpio.h> -#include "ar531x.h" -/* - GPIO Interrupt Support - Make use of request_irq() and the function gpio_to_irq() to trap gpio events - */ - -/* Global variables */ -static u32 ar531x_gpio_intr_Mask = 0; -/* - AR5312: I don't have any devices with this chip. Assumed to be similar to AR5215 - will someone who has one try the code and remove this message if it works? - */ - -#ifdef CONFIG_ATHEROS_AR5315 -/* - AR5315: Up to 2 GPIO pins may be monitored simultaneously - specifying more pins if you already have 2 will not have any effect - however, the excess gpio irqs will also be triggered if a valid gpio being monitored triggers - only high, low or edge triggered interrupt supported - */ -static unsigned int ar5315_gpio_set_type_gpio = 0; -static unsigned int ar5315_gpio_set_type_lvl = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING; -#endif - -#ifdef CONFIG_ATHEROS_AR5312 -/* Enable the specified AR5312_GPIO_IRQ interrupt */ -static void ar5312_gpio_intr_enable(unsigned int irq) { - u32 reg; - unsigned int gpio; - unsigned int imr; - - gpio = irq - (AR531X_GPIO_IRQ(0)); - if (gpio >= AR531X_NUM_GPIO) - return; - ar531x_gpio_intr_Mask |= (1<<gpio); - - reg = sysRegRead(AR531X_GPIO_CR); - reg &= ~(AR531X_GPIO_CR_M(gpio) | AR531X_GPIO_CR_UART(gpio) | AR531X_GPIO_CR_INT(gpio)); - reg |= AR531X_GPIO_CR_I(gpio); - reg |= AR531X_GPIO_CR_INT(gpio); - - sysRegWrite(AR531X_GPIO_CR, reg); - (void)sysRegRead(AR531X_GPIO_CR); /* flush to hardware */ - - imr = sysRegRead(AR531X_IMR); - imr |= AR531X_ISR_GPIO; - sysRegWrite(AR531X_IMR, imr); - imr = sysRegRead(AR531X_IMR); /* flush write buffer */ -} - -/* Disable the specified AR5312_GPIO_IRQ interrupt */ -static void ar5312_gpio_intr_disable(unsigned int irq) { - u32 reg; - unsigned int gpio; - gpio = irq - (AR531X_GPIO_IRQ(0)); - if (gpio >= AR531X_NUM_GPIO) - return; - - reg = sysRegRead(AR531X_GPIO_CR); - reg &= ~(AR531X_GPIO_CR_M(gpio) | AR531X_GPIO_CR_UART(gpio) | AR531X_GPIO_CR_INT(gpio)); - reg |= AR531X_GPIO_CR_I(gpio); - /* No GPIO_CR_INT bit */ - - sysRegWrite(AR531X_GPIO_CR, reg); - (void)sysRegRead(AR531X_GPIO_CR); /* flush to hardware */ - - /* Disable Interrupt if no gpio needs triggering */ - if (ar531x_gpio_intr_Mask != 0) { - unsigned int imr; - - imr = sysRegRead(AR531X_IMR); - imr &= ~AR531X_ISR_GPIO; - sysRegWrite(AR531X_IMR, imr); - imr = sysRegRead(AR531X_IMR); /* flush write buffer */ - } - - ar531x_gpio_intr_Mask &= ~(1<<gpio); -} - -/* Turn on the specified AR5312_GPIO_IRQ interrupt */ -static unsigned int ar5312_gpio_intr_startup(unsigned int irq) { - ar5312_gpio_intr_enable(irq); - return 0; -} - -static void ar5312_gpio_intr_end(unsigned int irq) { - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - ar5312_gpio_intr_enable(irq); -} - -asmlinkage void ar5312_gpio_irq_dispatch(void) { - int i; - u32 gpioIntPending; - gpioIntPending = sysRegRead(AR531X_GPIO_DI) & ar531x_gpio_intr_Mask; - sysRegWrite(AR531X_ISR, sysRegRead(AR531X_IMR) | ~AR531X_ISR_GPIO); - for (i=0; i<AR531X_GPIO_IRQ_COUNT; i++) { - if (gpioIntPending & (1 << i)) - do_IRQ(AR531X_GPIO_IRQ(i)); - } -} -#endif /* #ifdef CONFIG_ATHEROS_AR5312 */ - -#ifdef CONFIG_ATHEROS_AR5315 -/* Enable the specified AR5315_GPIO_IRQ interrupt */ -static void ar5315_gpio_intr_enable(unsigned int irq) { - u32 reg; - unsigned int gpio; - unsigned int imr; - unsigned int i; - - gpio = irq - (AR531X_GPIO_IRQ(0)); - if (gpio >= AR5315_NUM_GPIO) - return; - ar531x_gpio_intr_Mask |= (1<<gpio); - - reg = sysRegRead(AR5315_GPIO_CR); - reg &= ~(AR5315_GPIO_CR_M(gpio)); - reg |= AR5315_GPIO_CR_I(gpio); - sysRegWrite(AR5315_GPIO_CR, reg); - (void)sysRegRead(AR5315_GPIO_CR); /* flush write to hardware */ - - /* Locate a free register slot to enable gpio intr - will fail silently if no more slots are available - */ - reg = sysRegRead(AR5315_GPIO_INT); - for (i=0 ; i<=AR5315_GPIO_INT_MAX_Y ; i++) { - /* Free slot means trigger level = 0 */ - if ( AR5315_GPIO_INT_LVL_OFF == - (reg & AR5315_GPIO_INT_LVL_M) ) { - - unsigned int def_lvl = AR5315_GPIO_INT_LVL_EDGE; - if (ar5315_gpio_set_type_gpio == gpio) - def_lvl = ar5315_gpio_set_type_lvl; - - /* Set the gpio level trigger mode */ -/* reg &= ~(AR5315_GPIO_INT_LVL_M(i)); */ - reg |= AR5315_GPIO_INT_LVL(def_lvl); - - /* Enable the gpio pin */ - reg &= ~(AR5315_GPIO_INT_M); - reg |= AR5315_GPIO_INT_S(i); - - sysRegWrite(AR5315_GPIO_INT, reg); - (void)sysRegRead(AR5315_GPIO_INT); /* flush write to hardware */ - - /* break out of for loop */ - break; - } /* end if trigger level for slot i is 0 */ - } /* end for each slot */ - - imr = sysRegRead(AR5315_IMR); - imr |= AR5315_ISR_GPIO; - sysRegWrite(AR5315_IMR, imr); - imr = sysRegRead(AR5315_IMR); /* flush write buffer */ -} - - -/* Disable the specified AR5315_GPIO_IRQ interrupt */ -static void ar5315_gpio_intr_disable(unsigned int irq) { - u32 reg; - unsigned int gpio; - unsigned int i; - - gpio = irq - (AR531X_GPIO_IRQ(0)); - if (gpio >= AR5315_NUM_GPIO) - return; - - reg = sysRegRead(AR5315_GPIO_CR); - reg &= ~(AR5315_GPIO_CR_M(gpio)); - reg |= AR5315_GPIO_CR_I(gpio); - sysRegWrite(AR5315_GPIO_CR, reg); - (void)sysRegRead(AR5315_GPIO_CR); /* flush write to hardware */ - - /* Locate a the correct register slot to disable gpio intr */ - reg = sysRegRead(AR5315_GPIO_INT); - for (i=0 ; i<=AR5315_GPIO_INT_MAX_Y ; i++) { - /* If this correct */ - if ( AR5315_GPIO_INT_S(i) == - (reg & AR5315_GPIO_INT_M) ) { - /* Clear the gpio level trigger mode */ - reg &= ~(AR5315_GPIO_INT_LVL_M); - - sysRegWrite(AR5315_GPIO_INT, reg); - (void)sysRegRead(AR5315_GPIO_INT); /* flush write to hardware */ - break; - } /* end if trigger level for slot i is 0 */ - } /* end for each slot */ - - /* Disable interrupt only if no gpio needs triggering */ - if (ar531x_gpio_intr_Mask != 0) { - unsigned int imr; - - imr = sysRegRead(AR5315_IMR); - imr &= ~AR5315_ISR_GPIO; - sysRegWrite(AR5315_IMR, imr); - imr = sysRegRead(AR5315_IMR); /* flush write buffer */ - } - - ar531x_gpio_intr_Mask &= ~(1<<gpio); -} - -/* Turn on the specified AR5315_GPIO_IRQ interrupt */ -static unsigned int ar5315_gpio_intr_startup(unsigned int irq) { - ar5315_gpio_intr_enable(irq); - return 0; -} - -static void ar5315_gpio_intr_end(unsigned int irq) { - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - ar5315_gpio_intr_enable(irq); -} - -static int ar5315_gpio_intr_set_type(unsigned int irq, unsigned int flow_type) { - ar5315_gpio_set_type_gpio = irq - (AR531X_GPIO_IRQ(0)); - if (ar5315_gpio_set_type_gpio > AR5315_NUM_GPIO) - return -EINVAL; - switch (flow_type & IRQF_TRIGGER_MASK) { - case IRQF_TRIGGER_RISING: - case IRQF_TRIGGER_FALLING: - printk(KERN_WARNING "AR5315 GPIO %u falling back to edge triggered\n", ar5315_gpio_set_type_gpio); - case IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING: - ar5315_gpio_set_type_lvl = AR5315_GPIO_INT_LVL_EDGE; - break; - case IRQF_TRIGGER_LOW: - ar5315_gpio_set_type_lvl = AR5315_GPIO_INT_LVL_LOW; - break; - case IRQF_TRIGGER_HIGH: - ar5315_gpio_set_type_lvl = AR5315_GPIO_INT_LVL_HIGH; - break; - default: - return -EINVAL; - } - return 0; -} - -asmlinkage void ar5315_gpio_irq_dispatch(void){ - int i; - u32 gpioIntPending; - gpioIntPending = sysRegRead(AR5315_GPIO_DI) & ar531x_gpio_intr_Mask; - sysRegWrite(AR5315_ISR, sysRegRead(AR5315_IMR) | ~AR5315_ISR_GPIO); - for (i=0; i<AR531X_GPIO_IRQ_COUNT; i++) { - if (gpioIntPending & (1 << i)) - do_IRQ(AR531X_GPIO_IRQ(i)); - } -} -#endif /* #ifdef CONFIG_ATHEROS_AR5315 */ - -/* Common Code */ -static struct irq_chip ar531x_gpio_intr_controller = { - .typename = "AR531X GPIO", -}; - -/* ARGSUSED */ -irqreturn_t -spurious_gpio_handler(int cpl, void *dev_id) -{ - u32 gpioDataIn; - DO_AR5312(gpioDataIn = sysRegRead(AR531X_GPIO_DI);) - DO_AR5315(gpioDataIn = sysRegRead(AR5315_GPIO_DI);) - - printk("spurious_gpio_handler: 0x%08x dev=%p DI=0x%08x gpioIntMask=0x%08x\n", - cpl, dev_id, gpioDataIn, ar531x_gpio_intr_Mask); - - return IRQ_NONE; -} - -static struct irqaction spurious_gpio = { - .handler = spurious_gpio_handler, - .name = "spurious_gpio", -}; - -/* Initialize AR531X GPIO interrupts */ -static int __init ar531x_gpio_init(void) -{ - int i; - - DO_AR5312( \ - ar531x_gpio_intr_controller.startup = ar5312_gpio_intr_startup; \ - ar531x_gpio_intr_controller.shutdown = ar5312_gpio_intr_disable; \ - ar531x_gpio_intr_controller.enable = ar5312_gpio_intr_enable; \ - ar531x_gpio_intr_controller.disable = ar5312_gpio_intr_disable; \ - ar531x_gpio_intr_controller.ack = ar5312_gpio_intr_disable; \ - ar531x_gpio_intr_controller.end = ar5312_gpio_intr_end; \ - ) - - DO_AR5315( \ - ar531x_gpio_intr_controller.startup = ar5315_gpio_intr_startup; \ - ar531x_gpio_intr_controller.shutdown = ar5315_gpio_intr_disable; \ - ar531x_gpio_intr_controller.enable = ar5315_gpio_intr_enable; \ - ar531x_gpio_intr_controller.disable = ar5315_gpio_intr_disable; \ - ar531x_gpio_intr_controller.ack = ar5315_gpio_intr_disable; \ - ar531x_gpio_intr_controller.end = ar5315_gpio_intr_end; \ - ar531x_gpio_intr_controller.set_type = ar5315_gpio_intr_set_type; \ - ) - - for (i = AR531X_GPIO_IRQ_BASE; - i < AR531X_GPIO_IRQ_BASE + AR531X_GPIO_IRQ_COUNT; - i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - irq_desc[i].chip = &ar531x_gpio_intr_controller; - } - - setup_irq(AR531X_GPIO_IRQ_NONE, &spurious_gpio); - - return 0; -} - -subsys_initcall(ar531x_gpio_init); - diff --git a/target/linux/atheros/files/arch/mips/atheros/reset.c b/target/linux/atheros/files/arch/mips/atheros/reset.c index 2342de8..876fa29 100644 --- a/target/linux/atheros/files/arch/mips/atheros/reset.c +++ b/target/linux/atheros/files/arch/mips/atheros/reset.c @@ -9,7 +9,7 @@ #include <asm/uaccess.h> #include <ar531x.h> -#define AR531X_RESET_GPIO_IRQ (AR531X_GPIO_IRQ_BASE + bcfg->resetConfigGpio) +#define AR531X_RESET_GPIO_IRQ (AR531X_GPIO_IRQ(bcfg->resetConfigGpio)) struct event_t { struct work_struct wq; diff --git a/target/linux/atheros/files/include/asm-mips/mach-atheros/ar531x.h b/target/linux/atheros/files/include/asm-mips/mach-atheros/ar531x.h index ba52a2b..8148b76 100644 --- a/target/linux/atheros/files/include/asm-mips/mach-atheros/ar531x.h +++ b/target/linux/atheros/files/include/asm-mips/mach-atheros/ar531x.h @@ -54,7 +54,7 @@ extern void (*board_time_init)(void); /* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */ #define AR531X_GPIO_IRQ_NONE AR531X_GPIO_IRQ_BASE+0 -#define AR531X_GPIO_IRQ(n) AR531X_GPIO_IRQ_BASE+(n)+1 +#define AR531X_GPIO_IRQ(n) AR531X_GPIO_IRQ_BASE+n #define AR531X_GPIO_IRQ_COUNT 22 #define sysRegRead(phys) \ |