summaryrefslogtreecommitdiff
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/lantiq/Makefile2
-rw-r--r--target/linux/lantiq/config-default163
-rw-r--r--target/linux/lantiq/patches-3.8/0001-MTD-m25p80-allow-loading-mtd-name-from-OF.patch44
-rw-r--r--target/linux/lantiq/patches-3.8/0002-SPI-MIPS-lantiq-make-use-of-spi_finalize_current_mes.patch31
-rw-r--r--target/linux/lantiq/patches-3.8/0003-SPI-MIPS-lantiq-set-SPI_MASTER_HALF_DUPLEX-flag.patch29
-rw-r--r--target/linux/lantiq/patches-3.8/0004-Document-devicetree-add-OF-documents-for-lantiq-seri.patch39
-rw-r--r--target/linux/lantiq/patches-3.8/0005-PINCTRL-lantiq-pinconf-uses-port-instead-of-pin.patch92
-rw-r--r--target/linux/lantiq/patches-3.8/0006-PINCTRL-lantiq-faulty-bit-inversion.patch28
-rw-r--r--target/linux/lantiq/patches-3.8/0007-PINCTRL-lantiq-add-pin_config_group_set-support.patch157
-rw-r--r--target/linux/lantiq/patches-3.8/0008-PINCTRL-lantiq-add-output-pinconf-parameter.patch68
-rw-r--r--target/linux/lantiq/patches-3.8/0009-PINCTRL-lantiq-the-pinconf-OD-parameter-argument-was.patch33
-rw-r--r--target/linux/lantiq/patches-3.8/0010-PINCTRL-lantiq-only-probe-available-pad-controllers.patch30
-rw-r--r--target/linux/lantiq/patches-3.8/0011-PINCTRL-lantiq-one-of-the-boot-leds-was-defined-inco.patch30
-rw-r--r--target/linux/lantiq/patches-3.8/0012-PINCTRL-lantiq-fix-pinconfig-parameters.patch30
-rw-r--r--target/linux/lantiq/patches-3.8/0013-PINCTRL-lantiq-add-functionality-to-falcon_pinconf_d.patch60
-rw-r--r--target/linux/lantiq/patches-3.8/0014-PINCTRL-lantiq-fix-pin-availability-check.patch43
-rw-r--r--target/linux/lantiq/patches-3.8/0015-PINCTRL-lantiq-fix-pin-number-in-ltq_pmx_gpio_reques.patch31
-rw-r--r--target/linux/lantiq/patches-3.8/0016-MIPS-lantiq-trivial-typo-fix.patch29
-rw-r--r--target/linux/lantiq/patches-3.8/0017-MIPS-lantiq-adds-static-clock-for-PP32.patch219
-rw-r--r--target/linux/lantiq/patches-3.8/0018-MIPS-lantiq-improve-pci-reset-gpio-handling.patch40
-rw-r--r--target/linux/lantiq/patches-3.8/0019-MIPS-lantiq-rework-external-irq-code.patch216
-rw-r--r--target/linux/lantiq/patches-3.8/0020-MIPS-lantiq-adds-4dword-burst-length-for-dma.patch34
-rw-r--r--target/linux/lantiq/patches-3.8/0021-GPIO-MIPS-add-gpio-driver-for-falcon-SoC.patch404
-rw-r--r--target/linux/lantiq/patches-3.8/0022-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch1047
-rw-r--r--target/linux/lantiq/patches-3.8/0023-USB-fix-roothub-for-IFXHCD.patch38
-rw-r--r--target/linux/lantiq/patches-3.8/0024-SPI-MIPS-lantiq-adds-spi-xway.patch1032
-rw-r--r--target/linux/lantiq/patches-3.8/0025-NET-MIPS-lantiq-adds-xrx200-net.patch1426
-rw-r--r--target/linux/lantiq/patches-3.8/0026-NET-MIPS-lantiq-update-etop-driver-for-devicetree.patch832
-rw-r--r--target/linux/lantiq/patches-3.8/0027-NET-PHY-adds-driver-for-lantiq-PHY11G.patch270
-rw-r--r--target/linux/lantiq/patches-3.8/0028-NET-lantiq-adds-PHY11G-firmware-blobs.patch373
-rw-r--r--target/linux/lantiq/patches-3.8/0029-NET-lantiq-adds-gphy-clock.patch24
-rw-r--r--target/linux/lantiq/patches-3.8/0030-MIPS-lantiq-add-pcie-driver.patch4786
-rw-r--r--target/linux/lantiq/patches-3.8/0031-MIPS-lantiq-adds-minimal-dcdc-driver.patch106
-rw-r--r--target/linux/lantiq/patches-3.8/0032-MTD-lantiq-Add-NAND-support-on-Lantiq-Falcon-SoC.patch138
-rw-r--r--target/linux/lantiq/patches-3.8/0033-MTD-lantiq-xway-make-nand-actually-work.patch122
-rw-r--r--target/linux/lantiq/patches-3.8/0034-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch29
-rw-r--r--target/linux/lantiq/patches-3.8/0035-owrt-generic-dtb-image-hack.patch26
-rw-r--r--target/linux/lantiq/patches-3.8/0036-owrt-lantiq-dtb-image-hack.patch48
-rw-r--r--target/linux/lantiq/patches-3.8/0037-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch570
-rw-r--r--target/linux/lantiq/patches-3.8/0038-owrt-lantiq-handle-vmmc-memory-reservation.patch95
-rw-r--r--target/linux/lantiq/patches-3.8/0039-owrt-lantiq-backport-old-timer-code.patch1038
-rw-r--r--target/linux/lantiq/patches-3.8/0040-owrt-lantiq-add-atm-hack.patch518
-rw-r--r--target/linux/lantiq/patches-3.8/0041-owrt-mtd-split.patch221
43 files changed, 14590 insertions, 1 deletions
diff --git a/target/linux/lantiq/Makefile b/target/linux/lantiq/Makefile
index ce0f0dc..83ef83b 100644
--- a/target/linux/lantiq/Makefile
+++ b/target/linux/lantiq/Makefile
@@ -11,7 +11,7 @@ BOARDNAME:=Lantiq GPON/XWAY/SVIP
FEATURES:=squashfs jffs2
SUBTARGETS=xway ase falcon
-LINUX_VERSION:=3.7.10
+LINUX_VERSION:=3.8.2
CFLAGS=-Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves -mno-branch-likely
diff --git a/target/linux/lantiq/config-default b/target/linux/lantiq/config-default
new file mode 100644
index 0000000..a86d286
--- /dev/null
+++ b/target/linux/lantiq/config-default
@@ -0,0 +1,163 @@
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+# CONFIG_DEBUG_PINCTRL is not set
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DTC=y
+CONFIG_DT_EASY50712=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_ETHERNET_PACKET_MANGLE=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_MM_LANTIQ=y
+CONFIG_GPIO_STP_XWAY=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_MACH_CLKDEV=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_I2C_MUX_PINCTRL is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_LANTIQ=y
+CONFIG_LANTIQ_ETOP=y
+CONFIG_LANTIQ_PHY=y
+CONFIG_LANTIQ_WDT=y
+CONFIG_LANTIQ_XRX200=y
+CONFIG_LEDS_GPIO=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MIPS=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_SEAD3 is not set
+# CONFIG_MIPS_VPE_LOADER is not set
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_LANTIQ=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_UIMAGE_SPLIT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_DEVICE=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+# CONFIG_PCIE_LANTIQ is not set
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_LANTIQ=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+CONFIG_PINCONF=y
+CONFIG_PINCTRL=y
+# CONFIG_PINCTRL_EXYNOS4 is not set
+CONFIG_PINCTRL_LANTIQ=y
+# CONFIG_PINCTRL_SAMSUNG is not set
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_PINCTRL_XWAY=y
+CONFIG_PINMUX=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_PROC_DEVICETREE=y
+CONFIG_PSB6970_PHY=y
+CONFIG_RTL8366RB_PHY=y
+CONFIG_RTL8366_SMI=y
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_LANTIQ=y
+# CONFIG_SOC_AMAZON_SE is not set
+# CONFIG_SOC_FALCON is not set
+# CONFIG_SOC_SVIP is not set
+CONFIG_SOC_TYPE_XWAY=y
+CONFIG_SOC_XWAY=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_SWCONFIG=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_MULTITHREADING=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_UIDGID_CONVERTED=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USE_OF=y
+CONFIG_XRX200_PHY_FW=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/lantiq/patches-3.8/0001-MTD-m25p80-allow-loading-mtd-name-from-OF.patch b/target/linux/lantiq/patches-3.8/0001-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
new file mode 100644
index 0000000..42cf833
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0001-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
@@ -0,0 +1,44 @@
+From e65ecb8f256b5839690a240d9b14e303686f9ede Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 29 Jan 2013 21:11:55 +0100
+Subject: [PATCH 01/40] MTD: m25p80: allow loading mtd name from OF
+
+In accordance with the physmap flash we should honour the linux,mtd-name
+property when deciding what name the mtd device has.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/mtd/devices/m25p80.c | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
+index 4eeeb2d..b12da33 100644
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -810,10 +810,13 @@ static int m25p_probe(struct spi_device *spi)
+ unsigned i;
+ struct mtd_part_parser_data ppdata;
+ struct device_node __maybe_unused *np = spi->dev.of_node;
++ const char __maybe_unused *of_mtd_name = NULL;
+
+ #ifdef CONFIG_MTD_OF_PARTS
+ if (!of_device_is_available(np))
+ return -ENODEV;
++ of_property_read_string(spi->dev.of_node,
++ "linux,mtd-name", &of_mtd_name);
+ #endif
+
+ /* Platform data helps sort out which chip type we have, as
+@@ -889,6 +892,8 @@ static int m25p_probe(struct spi_device *spi)
+
+ if (data && data->name)
+ flash->mtd.name = data->name;
++ else if (of_mtd_name)
++ flash->mtd.name = of_mtd_name;
+ else
+ flash->mtd.name = dev_name(&spi->dev);
+
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0002-SPI-MIPS-lantiq-make-use-of-spi_finalize_current_mes.patch b/target/linux/lantiq/patches-3.8/0002-SPI-MIPS-lantiq-make-use-of-spi_finalize_current_mes.patch
new file mode 100644
index 0000000..1f3e7a1
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0002-SPI-MIPS-lantiq-make-use-of-spi_finalize_current_mes.patch
@@ -0,0 +1,31 @@
+From 8b921ffd449431543832b0e76389eb289cc78bb8 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 29 Jan 2013 21:24:17 +0100
+Subject: [PATCH 02/40] SPI: MIPS: lantiq: make use of
+ spi_finalize_current_message
+
+Rather than calling m->complete() directly we choose the sane way and call
+spi_finalize_current_message instead.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/spi/spi-falcon.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/spi/spi-falcon.c b/drivers/spi/spi-falcon.c
+index 6a6f62e..f9c66c2 100644
+--- a/drivers/spi/spi-falcon.c
++++ b/drivers/spi/spi-falcon.c
+@@ -398,7 +398,7 @@ static int falcon_sflash_xfer_one(struct spi_master *master,
+ }
+
+ m->status = ret;
+- m->complete(m->context);
++ spi_finalize_current_message(master);
+
+ return 0;
+ }
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0003-SPI-MIPS-lantiq-set-SPI_MASTER_HALF_DUPLEX-flag.patch b/target/linux/lantiq/patches-3.8/0003-SPI-MIPS-lantiq-set-SPI_MASTER_HALF_DUPLEX-flag.patch
new file mode 100644
index 0000000..2bf6dc3
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0003-SPI-MIPS-lantiq-set-SPI_MASTER_HALF_DUPLEX-flag.patch
@@ -0,0 +1,29 @@
+From a50f7db5b527c317c4bf2ae44a4ccdc8c7e598ab Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 29 Jan 2013 21:26:39 +0100
+Subject: [PATCH 03/40] SPI: MIPS: lantiq: set SPI_MASTER_HALF_DUPLEX flag
+
+Due to hardware limitations of the spi/flash frontend of the EBU we need to set
+the SPI_MASTER_HALF_DUPLEX flag.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/spi/spi-falcon.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/spi/spi-falcon.c b/drivers/spi/spi-falcon.c
+index f9c66c2..c7a74f0 100644
+--- a/drivers/spi/spi-falcon.c
++++ b/drivers/spi/spi-falcon.c
+@@ -423,6 +423,7 @@ static int falcon_sflash_probe(struct platform_device *pdev)
+
+ master->mode_bits = SPI_MODE_3;
+ master->num_chipselect = 1;
++ master->flags = SPI_MASTER_HALF_DUPLEX;
+ master->bus_num = -1;
+ master->setup = falcon_sflash_setup;
+ master->prepare_transfer_hardware = falcon_sflash_prepare_xfer;
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0004-Document-devicetree-add-OF-documents-for-lantiq-seri.patch b/target/linux/lantiq/patches-3.8/0004-Document-devicetree-add-OF-documents-for-lantiq-seri.patch
new file mode 100644
index 0000000..92c35c5
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0004-Document-devicetree-add-OF-documents-for-lantiq-seri.patch
@@ -0,0 +1,39 @@
+From 8cd55f4107a3acda4793ed282a114af2f4cb4983 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 20 Jul 2012 18:58:34 +0200
+Subject: [PATCH 04/40] Document: devicetree: add OF documents for lantiq
+ serial port
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: Rob Herring <rob.herring@calxeda.com>
+Cc: devicetree-discuss@lists.ozlabs.org
+---
+ .../devicetree/bindings/serial/lantiq_asc.txt | 16 ++++++++++++++++
+ 1 file changed, 16 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/serial/lantiq_asc.txt
+
+diff --git a/Documentation/devicetree/bindings/serial/lantiq_asc.txt b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
+new file mode 100644
+index 0000000..5b78591
+--- /dev/null
++++ b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
+@@ -0,0 +1,16 @@
++Lantiq SoC ASC serial controller
++
++Required properties:
++- compatible : Should be "lantiq,asc"
++- reg : Address and length of the register set for the device
++- interrupts: the 3 (tx rx err) interrupt numbers. The interrupt specifier
++ depends on the interrupt-parent interrupt controller.
++
++Example:
++
++asc1: serial@E100C00 {
++ compatible = "lantiq,asc";
++ reg = <0xE100C00 0x400>;
++ interrupt-parent = <&icu0>;
++ interrupts = <112 113 114>;
++};
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0005-PINCTRL-lantiq-pinconf-uses-port-instead-of-pin.patch b/target/linux/lantiq/patches-3.8/0005-PINCTRL-lantiq-pinconf-uses-port-instead-of-pin.patch
new file mode 100644
index 0000000..88eb804
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0005-PINCTRL-lantiq-pinconf-uses-port-instead-of-pin.patch
@@ -0,0 +1,92 @@
+From 5e19578b807e7ef6e7baf05fb1f69433d5e74667 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 30 Nov 2012 21:11:22 +0100
+Subject: [PATCH 05/40] PINCTRL: lantiq: pinconf uses port instead of pin
+
+The XWAY pinctrl driver invalidly uses the port and not the pin number to work
+out the registeres and bits to be set for the opendrain and pullup/down
+resistors.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/pinctrl/pinctrl-xway.c | 28 ++++++++++++++--------------
+ 1 file changed, 14 insertions(+), 14 deletions(-)
+
+diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c
+index 5f0eb04..69dec9b 100644
+--- a/drivers/pinctrl/pinctrl-xway.c
++++ b/drivers/pinctrl/pinctrl-xway.c
+@@ -441,17 +441,17 @@ static int xway_pinconf_get(struct pinctrl_dev *pctldev,
+ if (port == PORT3)
+ reg = GPIO3_OD;
+ else
+- reg = GPIO_OD(port);
++ reg = GPIO_OD(pin);
+ *config = LTQ_PINCONF_PACK(param,
+- !!gpio_getbit(info->membase[0], reg, PORT_PIN(port)));
++ !!gpio_getbit(info->membase[0], reg, PORT_PIN(pin)));
+ break;
+
+ case LTQ_PINCONF_PARAM_PULL:
+ if (port == PORT3)
+ reg = GPIO3_PUDEN;
+ else
+- reg = GPIO_PUDEN(port);
+- if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port))) {
++ reg = GPIO_PUDEN(pin);
++ if (!gpio_getbit(info->membase[0], reg, PORT_PIN(pin))) {
+ *config = LTQ_PINCONF_PACK(param, 0);
+ break;
+ }
+@@ -459,8 +459,8 @@ static int xway_pinconf_get(struct pinctrl_dev *pctldev,
+ if (port == PORT3)
+ reg = GPIO3_PUDSEL;
+ else
+- reg = GPIO_PUDSEL(port);
+- if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port)))
++ reg = GPIO_PUDSEL(pin);
++ if (!gpio_getbit(info->membase[0], reg, PORT_PIN(pin)))
+ *config = LTQ_PINCONF_PACK(param, 2);
+ else
+ *config = LTQ_PINCONF_PACK(param, 1);
+@@ -488,29 +488,29 @@ static int xway_pinconf_set(struct pinctrl_dev *pctldev,
+ if (port == PORT3)
+ reg = GPIO3_OD;
+ else
+- reg = GPIO_OD(port);
+- gpio_setbit(info->membase[0], reg, PORT_PIN(port));
++ reg = GPIO_OD(pin);
++ gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
+ break;
+
+ case LTQ_PINCONF_PARAM_PULL:
+ if (port == PORT3)
+ reg = GPIO3_PUDEN;
+ else
+- reg = GPIO_PUDEN(port);
++ reg = GPIO_PUDEN(pin);
+ if (arg == 0) {
+- gpio_clearbit(info->membase[0], reg, PORT_PIN(port));
++ gpio_clearbit(info->membase[0], reg, PORT_PIN(pin));
+ break;
+ }
+- gpio_setbit(info->membase[0], reg, PORT_PIN(port));
++ gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
+
+ if (port == PORT3)
+ reg = GPIO3_PUDSEL;
+ else
+- reg = GPIO_PUDSEL(port);
++ reg = GPIO_PUDSEL(pin);
+ if (arg == 1)
+- gpio_clearbit(info->membase[0], reg, PORT_PIN(port));
++ gpio_clearbit(info->membase[0], reg, PORT_PIN(pin));
+ else if (arg == 2)
+- gpio_setbit(info->membase[0], reg, PORT_PIN(port));
++ gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
+ else
+ dev_err(pctldev->dev, "Invalid pull value %d\n", arg);
+ break;
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0006-PINCTRL-lantiq-faulty-bit-inversion.patch b/target/linux/lantiq/patches-3.8/0006-PINCTRL-lantiq-faulty-bit-inversion.patch
new file mode 100644
index 0000000..713e2e7
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0006-PINCTRL-lantiq-faulty-bit-inversion.patch
@@ -0,0 +1,28 @@
+From 694063bb1049c6ff460f137a8011607103bad81b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 30 Jan 2013 18:14:23 +0100
+Subject: [PATCH 06/40] PINCTRL: lantiq: faulty bit inversion
+
+The logic of the OD bit was inverted when calling the pinconf get methode.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/pinctrl/pinctrl-xway.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c
+index 69dec9b..c49c9db 100644
+--- a/drivers/pinctrl/pinctrl-xway.c
++++ b/drivers/pinctrl/pinctrl-xway.c
+@@ -443,7 +443,7 @@ static int xway_pinconf_get(struct pinctrl_dev *pctldev,
+ else
+ reg = GPIO_OD(pin);
+ *config = LTQ_PINCONF_PACK(param,
+- !!gpio_getbit(info->membase[0], reg, PORT_PIN(pin)));
++ !gpio_getbit(info->membase[0], reg, PORT_PIN(pin)));
+ break;
+
+ case LTQ_PINCONF_PARAM_PULL:
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0007-PINCTRL-lantiq-add-pin_config_group_set-support.patch b/target/linux/lantiq/patches-3.8/0007-PINCTRL-lantiq-add-pin_config_group_set-support.patch
new file mode 100644
index 0000000..67a9b1b
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0007-PINCTRL-lantiq-add-pin_config_group_set-support.patch
@@ -0,0 +1,157 @@
+From 325ba34823f454c35c814d72022ba736ad56a1d4 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 30 Jan 2013 18:21:48 +0100
+Subject: [PATCH 07/40] PINCTRL: lantiq: add pin_config_group_set support
+
+While converting all the boards supported by OpenWrt to OF I noticed that this
+feature is missing. Adding it makes the devicetrees more readable.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/pinctrl/pinctrl-lantiq.c | 54 ++++++++++++++++++++++++--------------
+ drivers/pinctrl/pinctrl-xway.c | 15 +++++++++++
+ 2 files changed, 49 insertions(+), 20 deletions(-)
+
+diff --git a/drivers/pinctrl/pinctrl-lantiq.c b/drivers/pinctrl/pinctrl-lantiq.c
+index 15f501d..7d11072 100644
+--- a/drivers/pinctrl/pinctrl-lantiq.c
++++ b/drivers/pinctrl/pinctrl-lantiq.c
+@@ -64,11 +64,13 @@ static void ltq_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev,
+ seq_printf(s, " %s", dev_name(pctldev->dev));
+ }
+
+-static int ltq_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
++static void ltq_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
+ struct device_node *np,
+ struct pinctrl_map **map)
+ {
+ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev);
++ struct property *pins = of_find_property(np, "lantiq,pins", NULL);
++ struct property *groups = of_find_property(np, "lantiq,groups", NULL);
+ unsigned long configs[3];
+ unsigned num_configs = 0;
+ struct property *prop;
+@@ -76,8 +78,20 @@ static int ltq_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
+ const char *function;
+ int ret, i;
+
++ if (!pins && !groups) {
++ dev_err(pctldev->dev, "%s defines neither pins nor groups\n",
++ np->name);
++ return;
++ }
++
++ if (pins && groups) {
++ dev_err(pctldev->dev, "%s defines both pins and groups\n",
++ np->name);
++ return;
++ }
++
+ ret = of_property_read_string(np, "lantiq,function", &function);
+- if (!ret) {
++ if (groups && !ret) {
+ of_property_for_each_string(np, "lantiq,groups", prop, group) {
+ (*map)->type = PIN_MAP_TYPE_MUX_GROUP;
+ (*map)->name = function;
+@@ -85,11 +99,6 @@ static int ltq_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
+ (*map)->data.mux.function = function;
+ (*map)++;
+ }
+- if (of_find_property(np, "lantiq,pins", NULL))
+- dev_err(pctldev->dev,
+- "%s mixes pins and groups settings\n",
+- np->name);
+- return 0;
+ }
+
+ for (i = 0; i < info->num_params; i++) {
+@@ -103,7 +112,7 @@ static int ltq_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
+ }
+
+ if (!num_configs)
+- return -EINVAL;
++ return;
+
+ of_property_for_each_string(np, "lantiq,pins", prop, pin) {
+ (*map)->data.configs.configs = kmemdup(configs,
+@@ -115,7 +124,16 @@ static int ltq_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
+ (*map)->data.configs.num_configs = num_configs;
+ (*map)++;
+ }
+- return 0;
++ of_property_for_each_string(np, "lantiq,groups", prop, group) {
++ (*map)->data.configs.configs = kmemdup(configs,
++ num_configs * sizeof(unsigned long),
++ GFP_KERNEL);
++ (*map)->type = PIN_MAP_TYPE_CONFIGS_GROUP;
++ (*map)->name = group;
++ (*map)->data.configs.group_or_pin = group;
++ (*map)->data.configs.num_configs = num_configs;
++ (*map)++;
++ }
+ }
+
+ static int ltq_pinctrl_dt_subnode_size(struct device_node *np)
+@@ -135,23 +153,19 @@ static int ltq_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
+ {
+ struct pinctrl_map *tmp;
+ struct device_node *np;
+- int ret;
++ int max_maps = 0;
+
+- *num_maps = 0;
+ for_each_child_of_node(np_config, np)
+- *num_maps += ltq_pinctrl_dt_subnode_size(np);
+- *map = kzalloc(*num_maps * sizeof(struct pinctrl_map), GFP_KERNEL);
++ max_maps += ltq_pinctrl_dt_subnode_size(np);
++ *map = kzalloc(max_maps * sizeof(struct pinctrl_map) * 2, GFP_KERNEL);
+ if (!*map)
+ return -ENOMEM;
+ tmp = *map;
+
+- for_each_child_of_node(np_config, np) {
+- ret = ltq_pinctrl_dt_subnode_to_map(pctldev, np, &tmp);
+- if (ret < 0) {
+- ltq_pinctrl_dt_free_map(pctldev, *map, *num_maps);
+- return ret;
+- }
+- }
++ for_each_child_of_node(np_config, np)
++ ltq_pinctrl_dt_subnode_to_map(pctldev, np, &tmp);
++ *num_maps = ((int)(tmp - *map));
++
+ return 0;
+ }
+
+diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c
+index c49c9db..aa4c8b8 100644
+--- a/drivers/pinctrl/pinctrl-xway.c
++++ b/drivers/pinctrl/pinctrl-xway.c
+@@ -522,9 +522,24 @@ static int xway_pinconf_set(struct pinctrl_dev *pctldev,
+ return 0;
+ }
+
++int xway_pinconf_group_set(struct pinctrl_dev *pctldev,
++ unsigned selector,
++ unsigned long config)
++{
++ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev);
++ int i, ret = 0;
++
++ for (i = 0; i < info->grps[selector].npins && !ret; i++)
++ ret = xway_pinconf_set(pctldev,
++ info->grps[selector].pins[i], config);
++
++ return ret;
++}
++
+ static struct pinconf_ops xway_pinconf_ops = {
+ .pin_config_get = xway_pinconf_get,
+ .pin_config_set = xway_pinconf_set,
++ .pin_config_group_set = xway_pinconf_group_set,
+ };
+
+ static struct pinctrl_desc xway_pctrl_desc = {
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0008-PINCTRL-lantiq-add-output-pinconf-parameter.patch b/target/linux/lantiq/patches-3.8/0008-PINCTRL-lantiq-add-output-pinconf-parameter.patch
new file mode 100644
index 0000000..30e83ff
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0008-PINCTRL-lantiq-add-output-pinconf-parameter.patch
@@ -0,0 +1,68 @@
+From f9441b4f98b5b28f3d2cbebd0a70b227c35451d9 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 30 Jan 2013 18:33:39 +0100
+Subject: [PATCH 08/40] PINCTRL: lantiq: add output pinconf parameter
+
+While converting the boards inside OpenWrt to OF I noticed that the we are
+missing a pinconf parameter to set a pin to output.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/pinctrl/pinctrl-lantiq.h | 1 +
+ drivers/pinctrl/pinctrl-xway.c | 14 ++++++++++++++
+ 2 files changed, 15 insertions(+)
+
+diff --git a/drivers/pinctrl/pinctrl-lantiq.h b/drivers/pinctrl/pinctrl-lantiq.h
+index 4419d32..6d07f02 100644
+--- a/drivers/pinctrl/pinctrl-lantiq.h
++++ b/drivers/pinctrl/pinctrl-lantiq.h
+@@ -34,6 +34,7 @@ enum ltq_pinconf_param {
+ LTQ_PINCONF_PARAM_OPEN_DRAIN,
+ LTQ_PINCONF_PARAM_DRIVE_CURRENT,
+ LTQ_PINCONF_PARAM_SLEW_RATE,
++ LTQ_PINCONF_PARAM_OUTPUT,
+ };
+
+ struct ltq_cfg_param {
+diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c
+index aa4c8b8..b23b895 100644
+--- a/drivers/pinctrl/pinctrl-xway.c
++++ b/drivers/pinctrl/pinctrl-xway.c
+@@ -466,6 +466,11 @@ static int xway_pinconf_get(struct pinctrl_dev *pctldev,
+ *config = LTQ_PINCONF_PACK(param, 1);
+ break;
+
++ case LTQ_PINCONF_PARAM_OUTPUT:
++ reg = GPIO_DIR(pin);
++ *config = LTQ_PINCONF_PACK(param,
++ gpio_getbit(info->membase[0], reg, PORT_PIN(pin)));
++ break;
+ default:
+ dev_err(pctldev->dev, "Invalid config param %04x\n", param);
+ return -ENOTSUPP;
+@@ -515,6 +520,14 @@ static int xway_pinconf_set(struct pinctrl_dev *pctldev,
+ dev_err(pctldev->dev, "Invalid pull value %d\n", arg);
+ break;
+
++ case LTQ_PINCONF_PARAM_OUTPUT:
++ reg = GPIO_DIR(pin);
++ if (arg == 0)
++ gpio_clearbit(info->membase[0], reg, PORT_PIN(pin));
++ else
++ gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
++ break;
++
+ default:
+ dev_err(pctldev->dev, "Invalid config param %04x\n", param);
+ return -ENOTSUPP;
+@@ -573,6 +586,7 @@ static inline int xway_mux_apply(struct pinctrl_dev *pctrldev,
+ static const struct ltq_cfg_param xway_cfg_params[] = {
+ {"lantiq,pull", LTQ_PINCONF_PARAM_PULL},
+ {"lantiq,open-drain", LTQ_PINCONF_PARAM_OPEN_DRAIN},
++ {"lantiq,output", LTQ_PINCONF_PARAM_OUTPUT},
+ };
+
+ static struct ltq_pinmux_info xway_info = {
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0009-PINCTRL-lantiq-the-pinconf-OD-parameter-argument-was.patch b/target/linux/lantiq/patches-3.8/0009-PINCTRL-lantiq-the-pinconf-OD-parameter-argument-was.patch
new file mode 100644
index 0000000..ca546e7
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0009-PINCTRL-lantiq-the-pinconf-OD-parameter-argument-was.patch
@@ -0,0 +1,33 @@
+From 879fe8a24167983d2923f635cb37dc9e02f6cf57 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 30 Jan 2013 18:39:34 +0100
+Subject: [PATCH 09/40] PINCTRL: lantiq: the pinconf OD parameter argument was
+ ignored
+
+When setting the OpenDrain bit we should really honour the argument passed
+inside the devicetree.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/pinctrl/pinctrl-xway.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c
+index b23b895..53cb6a3 100644
+--- a/drivers/pinctrl/pinctrl-xway.c
++++ b/drivers/pinctrl/pinctrl-xway.c
+@@ -494,7 +494,10 @@ static int xway_pinconf_set(struct pinctrl_dev *pctldev,
+ reg = GPIO3_OD;
+ else
+ reg = GPIO_OD(pin);
+- gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
++ if (arg == 0)
++ gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
++ else
++ gpio_clearbit(info->membase[0], reg, PORT_PIN(pin));
+ break;
+
+ case LTQ_PINCONF_PARAM_PULL:
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0010-PINCTRL-lantiq-only-probe-available-pad-controllers.patch b/target/linux/lantiq/patches-3.8/0010-PINCTRL-lantiq-only-probe-available-pad-controllers.patch
new file mode 100644
index 0000000..82249ea
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0010-PINCTRL-lantiq-only-probe-available-pad-controllers.patch
@@ -0,0 +1,30 @@
+From 997390a8802e21b4b57d0ffcd91ad64651f1c2bf Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 30 Jan 2013 20:02:06 +0100
+Subject: [PATCH 10/40] PINCTRL: lantiq: only probe available pad controllers
+
+The template falcon.dtsi lists all 6 pad controllers that can be loaded. Only
+probe those that have status = "okay"; inside the dts file.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/pinctrl/pinctrl-falcon.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/drivers/pinctrl/pinctrl-falcon.c b/drivers/pinctrl/pinctrl-falcon.c
+index 8ed20e8..6331c5c 100644
+--- a/drivers/pinctrl/pinctrl-falcon.c
++++ b/drivers/pinctrl/pinctrl-falcon.c
+@@ -398,6 +398,9 @@ static int pinctrl_falcon_probe(struct platform_device *pdev)
+ u32 avail;
+ int pins;
+
++ if (!of_device_is_available(np))
++ continue;
++
+ if (!ppdev) {
+ dev_err(&pdev->dev, "failed to find pad pdev\n");
+ continue;
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0011-PINCTRL-lantiq-one-of-the-boot-leds-was-defined-inco.patch b/target/linux/lantiq/patches-3.8/0011-PINCTRL-lantiq-one-of-the-boot-leds-was-defined-inco.patch
new file mode 100644
index 0000000..ca8293f
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0011-PINCTRL-lantiq-one-of-the-boot-leds-was-defined-inco.patch
@@ -0,0 +1,30 @@
+From b416a5be614733792cf5fbfce31b6733c37ffa3f Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 30 Jan 2013 20:07:51 +0100
+Subject: [PATCH 11/40] PINCTRL: lantiq: one of the boot leds was defined
+ incorrectly
+
+On the Falcon SoC the bootleds are located on pins 9->14.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/pinctrl/pinctrl-falcon.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/pinctrl/pinctrl-falcon.c b/drivers/pinctrl/pinctrl-falcon.c
+index 6331c5c..249a405 100644
+--- a/drivers/pinctrl/pinctrl-falcon.c
++++ b/drivers/pinctrl/pinctrl-falcon.c
+@@ -170,7 +170,7 @@ static const unsigned pins_ntr[] = {GPIO4};
+ static const unsigned pins_ntr8k[] = {GPIO5};
+ static const unsigned pins_hrst[] = {GPIO6};
+ static const unsigned pins_mdio[] = {GPIO7, GPIO8};
+-static const unsigned pins_bled[] = {GPIO7, GPIO10, GPIO11,
++static const unsigned pins_bled[] = {GPIO9, GPIO10, GPIO11,
+ GPIO12, GPIO13, GPIO14};
+ static const unsigned pins_asc0[] = {GPIO32, GPIO33};
+ static const unsigned pins_spi[] = {GPIO34, GPIO35, GPIO36};
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0012-PINCTRL-lantiq-fix-pinconfig-parameters.patch b/target/linux/lantiq/patches-3.8/0012-PINCTRL-lantiq-fix-pinconfig-parameters.patch
new file mode 100644
index 0000000..4ac8d5a
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0012-PINCTRL-lantiq-fix-pinconfig-parameters.patch
@@ -0,0 +1,30 @@
+From ea1a25a2ca058e4b35c5763774e7fad6ab928418 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 30 Jan 2013 20:10:20 +0100
+Subject: [PATCH 12/40] PINCTRL: lantiq: fix pinconfig parameters
+
+The Falcon driver only defined the pinconf parameters but did not pass them
+properly to the underlying api.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/pinctrl/pinctrl-falcon.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/drivers/pinctrl/pinctrl-falcon.c b/drivers/pinctrl/pinctrl-falcon.c
+index 249a405..c5a9868 100644
+--- a/drivers/pinctrl/pinctrl-falcon.c
++++ b/drivers/pinctrl/pinctrl-falcon.c
+@@ -360,6 +360,8 @@ static const struct ltq_cfg_param falcon_cfg_params[] = {
+ static struct ltq_pinmux_info falcon_info = {
+ .desc = &falcon_pctrl_desc,
+ .apply_mux = falcon_mux_apply,
++ .params = falcon_cfg_params,
++ .num_params = ARRAY_SIZE(falcon_cfg_params),
+ };
+
+
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0013-PINCTRL-lantiq-add-functionality-to-falcon_pinconf_d.patch b/target/linux/lantiq/patches-3.8/0013-PINCTRL-lantiq-add-functionality-to-falcon_pinconf_d.patch
new file mode 100644
index 0000000..0233dd0
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0013-PINCTRL-lantiq-add-functionality-to-falcon_pinconf_d.patch
@@ -0,0 +1,60 @@
+From 98d06bc9e2a2f534aaaf4229aaf871e394234d20 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 30 Jan 2013 20:13:09 +0100
+Subject: [PATCH 13/40] PINCTRL: lantiq: add functionality to
+ falcon_pinconf_dbg_show
+
+The current code only has a stub for falcon_pinconf_dbg_show. This patch adds
+proper functionality.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/pinctrl/pinctrl-falcon.c | 31 +++++++++++++++++++++++++++++++
+ 1 file changed, 31 insertions(+)
+
+diff --git a/drivers/pinctrl/pinctrl-falcon.c b/drivers/pinctrl/pinctrl-falcon.c
+index c5a9868..4a0d54a 100644
+--- a/drivers/pinctrl/pinctrl-falcon.c
++++ b/drivers/pinctrl/pinctrl-falcon.c
+@@ -315,6 +315,37 @@ static int falcon_pinconf_set(struct pinctrl_dev *pctrldev,
+ static void falcon_pinconf_dbg_show(struct pinctrl_dev *pctrldev,
+ struct seq_file *s, unsigned offset)
+ {
++ unsigned long config;
++ struct pin_desc *desc;
++
++ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
++ int port = PORT(offset);
++
++ seq_printf(s, " (port %d) mux %d -- ", port,
++ pad_r32(info->membase[port], LTQ_PADC_MUX(PORT_PIN(offset))));
++
++ config = LTQ_PINCONF_PACK(LTQ_PINCONF_PARAM_PULL, 0);
++ if (!falcon_pinconf_get(pctrldev, offset, &config))
++ seq_printf(s, "pull %d ",
++ (int)LTQ_PINCONF_UNPACK_ARG(config));
++
++ config = LTQ_PINCONF_PACK(LTQ_PINCONF_PARAM_DRIVE_CURRENT, 0);
++ if (!falcon_pinconf_get(pctrldev, offset, &config))
++ seq_printf(s, "drive-current %d ",
++ (int)LTQ_PINCONF_UNPACK_ARG(config));
++
++ config = LTQ_PINCONF_PACK(LTQ_PINCONF_PARAM_SLEW_RATE, 0);
++ if (!falcon_pinconf_get(pctrldev, offset, &config))
++ seq_printf(s, "slew-rate %d ",
++ (int)LTQ_PINCONF_UNPACK_ARG(config));
++
++ desc = pin_desc_get(pctrldev, offset);
++ if (desc) {
++ if (desc->gpio_owner)
++ seq_printf(s, " owner: %s", desc->gpio_owner);
++ } else {
++ seq_printf(s, " not registered");
++ }
+ }
+
+ static void falcon_pinconf_group_dbg_show(struct pinctrl_dev *pctrldev,
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0014-PINCTRL-lantiq-fix-pin-availability-check.patch b/target/linux/lantiq/patches-3.8/0014-PINCTRL-lantiq-fix-pin-availability-check.patch
new file mode 100644
index 0000000..d1d2ff2
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0014-PINCTRL-lantiq-fix-pin-availability-check.patch
@@ -0,0 +1,43 @@
+From 51d5029bd9cd0ff85e1df87a4df57e544c52dc34 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 30 Jan 2013 20:16:22 +0100
+Subject: [PATCH 14/40] PINCTRL: lantiq: fix pin availability check
+
+The clock needs to be activated for the check to work. In order to be compatible
+with future silicon make sure that at least 1 pin is available before probing
+the pad controller.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/pinctrl/pinctrl-falcon.c | 11 ++++++++---
+ 1 file changed, 8 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/pinctrl/pinctrl-falcon.c b/drivers/pinctrl/pinctrl-falcon.c
+index 4a0d54a..de9d1db 100644
+--- a/drivers/pinctrl/pinctrl-falcon.c
++++ b/drivers/pinctrl/pinctrl-falcon.c
+@@ -455,12 +455,17 @@ static int pinctrl_falcon_probe(struct platform_device *pdev)
+ *bank);
+ return -ENOMEM;
+ }
++ clk_activate(falcon_info.clk[*bank]);
+ avail = pad_r32(falcon_info.membase[*bank],
+ LTQ_PADC_AVAIL);
+ pins = fls(avail);
+- lantiq_load_pin_desc(&falcon_pads[pad_count], *bank, pins);
+- pad_count += pins;
+- clk_enable(falcon_info.clk[*bank]);
++ if (pins) {
++ lantiq_load_pin_desc(&falcon_pads[pad_count],
++ *bank, pins);
++ pad_count += pins;
++ } else {
++ clk_deactivate(falcon_info.clk[*bank]);
++ }
+ dev_dbg(&pdev->dev, "found %s with %d pads\n",
+ res.name, pins);
+ }
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0015-PINCTRL-lantiq-fix-pin-number-in-ltq_pmx_gpio_reques.patch b/target/linux/lantiq/patches-3.8/0015-PINCTRL-lantiq-fix-pin-number-in-ltq_pmx_gpio_reques.patch
new file mode 100644
index 0000000..9ea301b
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0015-PINCTRL-lantiq-fix-pin-number-in-ltq_pmx_gpio_reques.patch
@@ -0,0 +1,31 @@
+From 363f0d3dc146215744363db97606a357310fad3d Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 30 Jan 2013 21:23:22 +0100
+Subject: [PATCH 15/40] PINCTRL: lantiq: fix pin number in
+ ltq_pmx_gpio_request_enable
+
+The mapping logic inside ltq_pmx_gpio_request_enable() was broken. This only
+effected Falcon SoC.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/pinctrl/pinctrl-lantiq.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/pinctrl/pinctrl-lantiq.c b/drivers/pinctrl/pinctrl-lantiq.c
+index 7d11072..a703846 100644
+--- a/drivers/pinctrl/pinctrl-lantiq.c
++++ b/drivers/pinctrl/pinctrl-lantiq.c
+@@ -294,7 +294,7 @@ static int ltq_pmx_gpio_request_enable(struct pinctrl_dev *pctrldev,
+ unsigned pin)
+ {
+ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+- int mfp = match_mfp(info, pin + (range->id * 32));
++ int mfp = match_mfp(info, pin);
+ int pin_func;
+
+ if (mfp < 0) {
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0016-MIPS-lantiq-trivial-typo-fix.patch b/target/linux/lantiq/patches-3.8/0016-MIPS-lantiq-trivial-typo-fix.patch
new file mode 100644
index 0000000..a10aed8
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0016-MIPS-lantiq-trivial-typo-fix.patch
@@ -0,0 +1,29 @@
+From cc64558db2d91e89e1de174b6ad4a159ac27bf8b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 19 Jan 2013 08:54:23 +0000
+Subject: [PATCH 16/40] MIPS: lantiq: trivial typo fix
+
+"nodes" is written with a single "s"
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/4814/
+---
+ arch/mips/lantiq/xway/sysctrl.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
+index 3925e66..1aaa726 100644
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -305,7 +305,7 @@ void __init ltq_soc_init(void)
+
+ /* check if all the core register ranges are available */
+ if (!np_pmu || !np_cgu || !np_ebu)
+- panic("Failed to load core nodess from devicetree");
++ panic("Failed to load core nodes from devicetree");
+
+ if (of_address_to_resource(np_pmu, 0, &res_pmu) ||
+ of_address_to_resource(np_cgu, 0, &res_cgu) ||
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0017-MIPS-lantiq-adds-static-clock-for-PP32.patch b/target/linux/lantiq/patches-3.8/0017-MIPS-lantiq-adds-static-clock-for-PP32.patch
new file mode 100644
index 0000000..07ae757
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0017-MIPS-lantiq-adds-static-clock-for-PP32.patch
@@ -0,0 +1,219 @@
+From 46a704b1b093f4053eceaf8e5f0ab54949afa532 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 19 Jan 2013 08:54:24 +0000
+Subject: [PATCH 17/40] MIPS: lantiq: adds static clock for PP32
+
+The Lantiq DSL SoCs have an internal networking processor. Add code to read
+the static clock rate.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/4815/
+---
+ arch/mips/include/asm/mach-lantiq/lantiq.h | 1 +
+ arch/mips/lantiq/clk.c | 12 ++++++--
+ arch/mips/lantiq/clk.h | 7 ++++-
+ arch/mips/lantiq/falcon/sysctrl.c | 4 +--
+ arch/mips/lantiq/xway/clk.c | 43 ++++++++++++++++++++++++++++
+ arch/mips/lantiq/xway/sysctrl.c | 12 ++++----
+ 6 files changed, 69 insertions(+), 10 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/lantiq.h b/arch/mips/include/asm/mach-lantiq/lantiq.h
+index 5e8a6e9..76be7a0 100644
+--- a/arch/mips/include/asm/mach-lantiq/lantiq.h
++++ b/arch/mips/include/asm/mach-lantiq/lantiq.h
+@@ -41,6 +41,7 @@ extern void clk_deactivate(struct clk *clk);
+ extern struct clk *clk_get_cpu(void);
+ extern struct clk *clk_get_fpi(void);
+ extern struct clk *clk_get_io(void);
++extern struct clk *clk_get_ppe(void);
+
+ /* find out what bootsource we have */
+ extern unsigned char ltq_boot_select(void);
+diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c
+index ce2f129..d903560 100644
+--- a/arch/mips/lantiq/clk.c
++++ b/arch/mips/lantiq/clk.c
+@@ -26,13 +26,15 @@
+ #include "prom.h"
+
+ /* lantiq socs have 3 static clocks */
+-static struct clk cpu_clk_generic[3];
++static struct clk cpu_clk_generic[4];
+
+-void clkdev_add_static(unsigned long cpu, unsigned long fpi, unsigned long io)
++void clkdev_add_static(unsigned long cpu, unsigned long fpi,
++ unsigned long io, unsigned long ppe)
+ {
+ cpu_clk_generic[0].rate = cpu;
+ cpu_clk_generic[1].rate = fpi;
+ cpu_clk_generic[2].rate = io;
++ cpu_clk_generic[3].rate = ppe;
+ }
+
+ struct clk *clk_get_cpu(void)
+@@ -51,6 +53,12 @@ struct clk *clk_get_io(void)
+ return &cpu_clk_generic[2];
+ }
+
++struct clk *clk_get_ppe(void)
++{
++ return &cpu_clk_generic[3];
++}
++EXPORT_SYMBOL_GPL(clk_get_ppe);
++
+ static inline int clk_good(struct clk *clk)
+ {
+ return clk && !IS_ERR(clk);
+diff --git a/arch/mips/lantiq/clk.h b/arch/mips/lantiq/clk.h
+index fa67060..77e4bdb 100644
+--- a/arch/mips/lantiq/clk.h
++++ b/arch/mips/lantiq/clk.h
+@@ -27,12 +27,15 @@
+ #define CLOCK_167M 166666667
+ #define CLOCK_196_608M 196608000
+ #define CLOCK_200M 200000000
++#define CLOCK_222M 222000000
++#define CLOCK_240M 240000000
+ #define CLOCK_250M 250000000
+ #define CLOCK_266M 266666666
+ #define CLOCK_300M 300000000
+ #define CLOCK_333M 333333333
+ #define CLOCK_393M 393215332
+ #define CLOCK_400M 400000000
++#define CLOCK_450M 450000000
+ #define CLOCK_500M 500000000
+ #define CLOCK_600M 600000000
+
+@@ -64,15 +67,17 @@ struct clk {
+ };
+
+ extern void clkdev_add_static(unsigned long cpu, unsigned long fpi,
+- unsigned long io);
++ unsigned long io, unsigned long ppe);
+
+ extern unsigned long ltq_danube_cpu_hz(void);
+ extern unsigned long ltq_danube_fpi_hz(void);
++extern unsigned long ltq_danube_pp32_hz(void);
+
+ extern unsigned long ltq_ar9_cpu_hz(void);
+ extern unsigned long ltq_ar9_fpi_hz(void);
+
+ extern unsigned long ltq_vr9_cpu_hz(void);
+ extern unsigned long ltq_vr9_fpi_hz(void);
++extern unsigned long ltq_vr9_pp32_hz(void);
+
+ #endif
+diff --git a/arch/mips/lantiq/falcon/sysctrl.c b/arch/mips/lantiq/falcon/sysctrl.c
+index 2d4ced3..ff4894a 100644
+--- a/arch/mips/lantiq/falcon/sysctrl.c
++++ b/arch/mips/lantiq/falcon/sysctrl.c
+@@ -241,9 +241,9 @@ void __init ltq_soc_init(void)
+
+ /* get our 3 static rates for cpu, fpi and io clocks */
+ if (ltq_sys1_r32(SYS1_CPU0CC) & CPU0CC_CPUDIV)
+- clkdev_add_static(CLOCK_200M, CLOCK_100M, CLOCK_200M);
++ clkdev_add_static(CLOCK_200M, CLOCK_100M, CLOCK_200M, 0);
+ else
+- clkdev_add_static(CLOCK_400M, CLOCK_100M, CLOCK_200M);
++ clkdev_add_static(CLOCK_400M, CLOCK_100M, CLOCK_200M, 0);
+
+ /* add our clock domains */
+ clkdev_add_sys("1d810000.gpio", SYSCTL_SYSETH, ACTS_P0);
+diff --git a/arch/mips/lantiq/xway/clk.c b/arch/mips/lantiq/xway/clk.c
+index 9aa17f7..1ab576d 100644
+--- a/arch/mips/lantiq/xway/clk.c
++++ b/arch/mips/lantiq/xway/clk.c
+@@ -53,6 +53,29 @@ unsigned long ltq_danube_cpu_hz(void)
+ }
+ }
+
++unsigned long ltq_danube_pp32_hz(void)
++{
++ unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 7) & 3;
++ unsigned long clk;
++
++ switch (clksys) {
++ case 1:
++ clk = CLOCK_240M;
++ break;
++ case 2:
++ clk = CLOCK_222M;
++ break;
++ case 3:
++ clk = CLOCK_133M;
++ break;
++ default:
++ clk = CLOCK_266M;
++ break;
++ }
++
++ return clk;
++}
++
+ unsigned long ltq_ar9_sys_hz(void)
+ {
+ if (((ltq_cgu_r32(CGU_SYS) >> 3) & 0x3) == 0x2)
+@@ -149,3 +172,23 @@ unsigned long ltq_vr9_fpi_hz(void)
+
+ return clk;
+ }
++
++unsigned long ltq_vr9_pp32_hz(void)
++{
++ unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 16) & 3;
++ unsigned long clk;
++
++ switch (clksys) {
++ case 1:
++ clk = CLOCK_450M;
++ break;
++ case 2:
++ clk = CLOCK_300M;
++ break;
++ default:
++ clk = CLOCK_500M;
++ break;
++ }
++
++ return clk;
++}
+diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
+index 1aaa726..3390fcd 100644
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -356,14 +356,16 @@ void __init ltq_soc_init(void)
+
+ if (of_machine_is_compatible("lantiq,ase")) {
+ if (ltq_cgu_r32(CGU_SYS) & (1 << 5))
+- clkdev_add_static(CLOCK_266M, CLOCK_133M, CLOCK_133M);
++ clkdev_add_static(CLOCK_266M, CLOCK_133M,
++ CLOCK_133M, CLOCK_266M);
+ else
+- clkdev_add_static(CLOCK_133M, CLOCK_133M, CLOCK_133M);
++ clkdev_add_static(CLOCK_133M, CLOCK_133M,
++ CLOCK_133M, CLOCK_133M);
+ clkdev_add_cgu("1e180000.etop", "ephycgu", CGU_EPHY),
+ clkdev_add_pmu("1e180000.etop", "ephy", 0, PMU_EPHY);
+ } else if (of_machine_is_compatible("lantiq,vr9")) {
+ clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(),
+- ltq_vr9_fpi_hz());
++ ltq_vr9_fpi_hz(), ltq_vr9_pp32_hz());
+ clkdev_add_pmu("1d900000.pcie", "phy", 1, PMU1_PCIE_PHY);
+ clkdev_add_pmu("1d900000.pcie", "bus", 0, PMU_PCIE_CLK);
+ clkdev_add_pmu("1d900000.pcie", "msi", 1, PMU1_PCIE_MSI);
+@@ -376,10 +378,10 @@ void __init ltq_soc_init(void)
+ PMU_PPE_QSB | PMU_PPE_TOP);
+ } else if (of_machine_is_compatible("lantiq,ar9")) {
+ clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
+- ltq_ar9_fpi_hz());
++ ltq_ar9_fpi_hz(), CLOCK_250M);
+ clkdev_add_pmu("1e180000.etop", "switch", 0, PMU_SWITCH);
+ } else {
+ clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
+- ltq_danube_fpi_hz());
++ ltq_danube_fpi_hz(), ltq_danube_pp32_hz());
+ }
+ }
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0018-MIPS-lantiq-improve-pci-reset-gpio-handling.patch b/target/linux/lantiq/patches-3.8/0018-MIPS-lantiq-improve-pci-reset-gpio-handling.patch
new file mode 100644
index 0000000..c41e8e1
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0018-MIPS-lantiq-improve-pci-reset-gpio-handling.patch
@@ -0,0 +1,40 @@
+From b6684dd3036513e4f91986fe982356512458f711 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 19 Jan 2013 08:54:26 +0000
+Subject: [PATCH 18/40] MIPS: lantiq: improve pci reset gpio handling
+
+We need to make sure that the reset gpio is available and also set a sane
+default state.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/4817/
+---
+ arch/mips/pci/pci-lantiq.c | 12 ++++++++++--
+ 1 file changed, 10 insertions(+), 2 deletions(-)
+
+diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
+index 9568178..f32664b 100644
+--- a/arch/mips/pci/pci-lantiq.c
++++ b/arch/mips/pci/pci-lantiq.c
+@@ -129,8 +129,16 @@ static int ltq_pci_startup(struct platform_device *pdev)
+
+ /* setup reset gpio used by pci */
+ reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
+- if (gpio_is_valid(reset_gpio))
+- devm_gpio_request(&pdev->dev, reset_gpio, "pci-reset");
++ if (gpio_is_valid(reset_gpio)) {
++ int ret = devm_gpio_request(&pdev->dev,
++ reset_gpio, "pci-reset");
++ if (ret) {
++ dev_err(&pdev->dev,
++ "failed to request gpio %d\n", reset_gpio);
++ return ret;
++ }
++ gpio_direction_output(reset_gpio, 1);
++ }
+
+ /* enable auto-switching between PCI and EBU */
+ ltq_pci_w32(0xa, PCI_CR_CLK_CTRL);
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0019-MIPS-lantiq-rework-external-irq-code.patch b/target/linux/lantiq/patches-3.8/0019-MIPS-lantiq-rework-external-irq-code.patch
new file mode 100644
index 0000000..f976765
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0019-MIPS-lantiq-rework-external-irq-code.patch
@@ -0,0 +1,216 @@
+From d8f6bf3fb606ee8fdd5b7aff4aedb54e30792b84 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 19 Jan 2013 08:54:27 +0000
+Subject: [PATCH 19/40] MIPS: lantiq: rework external irq code
+
+This code makes the irqs used by the EIU loadable from the DT. Additionally we
+add a helper that allows the pinctrl layer to map external irqs to real irq
+numbers.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/4818/
+---
+ arch/mips/include/asm/mach-lantiq/lantiq.h | 1 +
+ arch/mips/lantiq/irq.c | 105 +++++++++++++++++++---------
+ 2 files changed, 74 insertions(+), 32 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/lantiq.h b/arch/mips/include/asm/mach-lantiq/lantiq.h
+index 76be7a0..f196cce 100644
+--- a/arch/mips/include/asm/mach-lantiq/lantiq.h
++++ b/arch/mips/include/asm/mach-lantiq/lantiq.h
+@@ -34,6 +34,7 @@ extern spinlock_t ebu_lock;
+ extern void ltq_disable_irq(struct irq_data *data);
+ extern void ltq_mask_and_ack_irq(struct irq_data *data);
+ extern void ltq_enable_irq(struct irq_data *data);
++extern int ltq_eiu_get_irq(int exin);
+
+ /* clock handling */
+ extern int clk_activate(struct clk *clk);
+diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
+index a7935bf..5119487 100644
+--- a/arch/mips/lantiq/irq.c
++++ b/arch/mips/lantiq/irq.c
+@@ -33,17 +33,10 @@
+ /* register definitions - external irqs */
+ #define LTQ_EIU_EXIN_C 0x0000
+ #define LTQ_EIU_EXIN_INIC 0x0004
++#define LTQ_EIU_EXIN_INC 0x0008
+ #define LTQ_EIU_EXIN_INEN 0x000C
+
+-/* irq numbers used by the external interrupt unit (EIU) */
+-#define LTQ_EIU_IR0 (INT_NUM_IM4_IRL0 + 30)
+-#define LTQ_EIU_IR1 (INT_NUM_IM3_IRL0 + 31)
+-#define LTQ_EIU_IR2 (INT_NUM_IM1_IRL0 + 26)
+-#define LTQ_EIU_IR3 INT_NUM_IM1_IRL0
+-#define LTQ_EIU_IR4 (INT_NUM_IM1_IRL0 + 1)
+-#define LTQ_EIU_IR5 (INT_NUM_IM1_IRL0 + 2)
+-#define LTQ_EIU_IR6 (INT_NUM_IM2_IRL0 + 30)
+-#define XWAY_EXIN_COUNT 3
++/* number of external interrupts */
+ #define MAX_EIU 6
+
+ /* the performance counter */
+@@ -72,20 +65,19 @@
+ int gic_present;
+ #endif
+
+-static unsigned short ltq_eiu_irq[MAX_EIU] = {
+- LTQ_EIU_IR0,
+- LTQ_EIU_IR1,
+- LTQ_EIU_IR2,
+- LTQ_EIU_IR3,
+- LTQ_EIU_IR4,
+- LTQ_EIU_IR5,
+-};
+-
+ static int exin_avail;
++static struct resource ltq_eiu_irq[MAX_EIU];
+ static void __iomem *ltq_icu_membase[MAX_IM];
+ static void __iomem *ltq_eiu_membase;
+ static struct irq_domain *ltq_domain;
+
++int ltq_eiu_get_irq(int exin)
++{
++ if (exin < exin_avail)
++ return ltq_eiu_irq[exin].start;
++ return -1;
++}
++
+ void ltq_disable_irq(struct irq_data *d)
+ {
+ u32 ier = LTQ_ICU_IM0_IER;
+@@ -128,19 +120,65 @@ void ltq_enable_irq(struct irq_data *d)
+ ltq_icu_w32(im, ltq_icu_r32(im, ier) | BIT(offset), ier);
+ }
+
++static int ltq_eiu_settype(struct irq_data *d, unsigned int type)
++{
++ int i;
++
++ for (i = 0; i < MAX_EIU; i++) {
++ if (d->hwirq == ltq_eiu_irq[i].start) {
++ int val = 0;
++ int edge = 0;
++
++ switch (type) {
++ case IRQF_TRIGGER_NONE:
++ break;
++ case IRQF_TRIGGER_RISING:
++ val = 1;
++ edge = 1;
++ break;
++ case IRQF_TRIGGER_FALLING:
++ val = 2;
++ edge = 1;
++ break;
++ case IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING:
++ val = 3;
++ edge = 1;
++ break;
++ case IRQF_TRIGGER_HIGH:
++ val = 5;
++ break;
++ case IRQF_TRIGGER_LOW:
++ val = 6;
++ break;
++ default:
++ pr_err("invalid type %d for irq %ld\n",
++ type, d->hwirq);
++ return -EINVAL;
++ }
++
++ if (edge)
++ irq_set_handler(d->hwirq, handle_edge_irq);
++
++ ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_C) |
++ (val << (i * 4)), LTQ_EIU_EXIN_C);
++ }
++ }
++
++ return 0;
++}
++
+ static unsigned int ltq_startup_eiu_irq(struct irq_data *d)
+ {
+ int i;
+
+ ltq_enable_irq(d);
+ for (i = 0; i < MAX_EIU; i++) {
+- if (d->hwirq == ltq_eiu_irq[i]) {
+- /* low level - we should really handle set_type */
+- ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_C) |
+- (0x6 << (i * 4)), LTQ_EIU_EXIN_C);
++ if (d->hwirq == ltq_eiu_irq[i].start) {
++ /* by default we are low level triggered */
++ ltq_eiu_settype(d, IRQF_TRIGGER_LOW);
+ /* clear all pending */
+- ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INIC) & ~BIT(i),
+- LTQ_EIU_EXIN_INIC);
++ ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INC) & ~BIT(i),
++ LTQ_EIU_EXIN_INC);
+ /* enable */
+ ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) | BIT(i),
+ LTQ_EIU_EXIN_INEN);
+@@ -157,7 +195,7 @@ static void ltq_shutdown_eiu_irq(struct irq_data *d)
+
+ ltq_disable_irq(d);
+ for (i = 0; i < MAX_EIU; i++) {
+- if (d->hwirq == ltq_eiu_irq[i]) {
++ if (d->hwirq == ltq_eiu_irq[i].start) {
+ /* disable */
+ ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) & ~BIT(i),
+ LTQ_EIU_EXIN_INEN);
+@@ -186,6 +224,7 @@ static struct irq_chip ltq_eiu_type = {
+ .irq_ack = ltq_ack_irq,
+ .irq_mask = ltq_disable_irq,
+ .irq_mask_ack = ltq_mask_and_ack_irq,
++ .irq_set_type = ltq_eiu_settype,
+ };
+
+ static void ltq_hw_irqdispatch(int module)
+@@ -301,7 +340,7 @@ static int icu_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
+ return 0;
+
+ for (i = 0; i < exin_avail; i++)
+- if (hw == ltq_eiu_irq[i])
++ if (hw == ltq_eiu_irq[i].start)
+ chip = &ltq_eiu_type;
+
+ irq_set_chip_and_handler(hw, chip, handle_level_irq);
+@@ -323,7 +362,7 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
+ {
+ struct device_node *eiu_node;
+ struct resource res;
+- int i;
++ int i, ret;
+
+ for (i = 0; i < MAX_IM; i++) {
+ if (of_address_to_resource(node, i, &res))
+@@ -340,17 +379,19 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
+ }
+
+ /* the external interrupts are optional and xway only */
+- eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu");
++ eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu-xway");
+ if (eiu_node && !of_address_to_resource(eiu_node, 0, &res)) {
+ /* find out how many external irq sources we have */
+- const __be32 *count = of_get_property(node,
+- "lantiq,count", NULL);
++ exin_avail = of_irq_count(eiu_node);
+
+- if (count)
+- exin_avail = *count;
+ if (exin_avail > MAX_EIU)
+ exin_avail = MAX_EIU;
+
++ ret = of_irq_to_resource_table(eiu_node,
++ ltq_eiu_irq, exin_avail);
++ if (ret != exin_avail)
++ panic("failed to load external irq resources\n");
++
+ if (request_mem_region(res.start, resource_size(&res),
+ res.name) < 0)
+ pr_err("Failed to request eiu memory");
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0020-MIPS-lantiq-adds-4dword-burst-length-for-dma.patch b/target/linux/lantiq/patches-3.8/0020-MIPS-lantiq-adds-4dword-burst-length-for-dma.patch
new file mode 100644
index 0000000..febc16a
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0020-MIPS-lantiq-adds-4dword-burst-length-for-dma.patch
@@ -0,0 +1,34 @@
+From 5be3837d01ea56e1455781f1b51764bd896973f2 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 6 Dec 2012 11:59:23 +0100
+Subject: [PATCH 20/40] MIPS: lantiq: adds 4dword burst length for dma
+
+---
+ arch/mips/lantiq/xway/dma.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
+index e44a186..c7684c9 100644
+--- a/arch/mips/lantiq/xway/dma.c
++++ b/arch/mips/lantiq/xway/dma.c
+@@ -47,6 +47,7 @@
+ #define DMA_IRQ_ACK 0x7e /* IRQ status register */
+ #define DMA_POLL BIT(31) /* turn on channel polling */
+ #define DMA_CLK_DIV4 BIT(6) /* polling clock divider */
++#define DMA_4W_BURST BIT(2) /* 4 word burst length */
+ #define DMA_2W_BURST BIT(1) /* 2 word burst length */
+ #define DMA_MAX_CHANNEL 20 /* the soc has 20 channels */
+ #define DMA_ETOP_ENDIANNESS (0xf << 8) /* endianness swap etop channels */
+@@ -195,7 +196,8 @@ ltq_dma_init_port(int p)
+ * Tell the DMA engine to swap the endianness of data frames and
+ * drop packets if the channel arbitration fails.
+ */
+- ltq_dma_w32_mask(0, DMA_ETOP_ENDIANNESS | DMA_PDEN,
++ ltq_dma_w32_mask(0, (DMA_4W_BURST << 4) | (DMA_4W_BURST << 2) |
++ DMA_ETOP_ENDIANNESS | DMA_PDEN,
+ LTQ_DMA_PCTRL);
+ break;
+
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0021-GPIO-MIPS-add-gpio-driver-for-falcon-SoC.patch b/target/linux/lantiq/patches-3.8/0021-GPIO-MIPS-add-gpio-driver-for-falcon-SoC.patch
new file mode 100644
index 0000000..a6d3259
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0021-GPIO-MIPS-add-gpio-driver-for-falcon-SoC.patch
@@ -0,0 +1,404 @@
+From ff3d0dd789882ad552a5224d34e5db426e1c45fe Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 23 Jun 2012 15:32:33 +0200
+Subject: [PATCH 21/40] GPIO: MIPS: add gpio driver for falcon SoC
+
+Add driver for GPIO blocks found on Lantiq FALCON SoC. The SoC has 5 banks of
+up to 32 pads. The GPIO blocks have a per pin IRQs.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Cc: linux-kernel@vger.kernel.org
+---
+ drivers/gpio/Kconfig | 5 +
+ drivers/gpio/Makefile | 1 +
+ drivers/gpio/gpio-falcon.c | 349 ++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 355 insertions(+)
+ create mode 100644 drivers/gpio/gpio-falcon.c
+
+diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
+index 682de75..e8d84fa 100644
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -133,6 +133,11 @@ config GPIO_EP93XX
+ depends on ARCH_EP93XX
+ select GPIO_GENERIC
+
++config GPIO_FALCON
++ def_bool y
++ depends on MIPS && SOC_FALCON
++ select GPIO_GENERIC
++
+ config GPIO_MM_LANTIQ
+ bool "Lantiq Memory mapped GPIOs"
+ depends on LANTIQ && SOC_XWAY
+diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
+index c5aebd0..9bdbb91 100644
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -24,6 +24,7 @@ obj-$(CONFIG_GPIO_DA9055) += gpio-da9055.o
+ obj-$(CONFIG_ARCH_DAVINCI) += gpio-davinci.o
+ obj-$(CONFIG_GPIO_EM) += gpio-em.o
+ obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
++obj-$(CONFIG_GPIO_FALCON) += gpio-falcon.o
+ obj-$(CONFIG_GPIO_GE_FPGA) += gpio-ge.o
+ obj-$(CONFIG_GPIO_ICH) += gpio-ich.o
+ obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o
+diff --git a/drivers/gpio/gpio-falcon.c b/drivers/gpio/gpio-falcon.c
+new file mode 100644
+index 0000000..ae8b55d
+--- /dev/null
++++ b/drivers/gpio/gpio-falcon.c
+@@ -0,0 +1,349 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com>
++ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/gpio.h>
++#include <linux/interrupt.h>
++#include <linux/slab.h>
++#include <linux/export.h>
++#include <linux/err.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/of_irq.h>
++#include <linux/pinctrl/pinctrl.h>
++#include <linux/pinctrl/consumer.h>
++#include <linux/platform_device.h>
++
++#include <lantiq_soc.h>
++
++/* Data Output Register */
++#define GPIO_OUT 0x00000000
++/* Data Input Register */
++#define GPIO_IN 0x00000004
++/* Direction Register */
++#define GPIO_DIR 0x00000008
++/* External Interrupt Control Register 0 */
++#define GPIO_EXINTCR0 0x00000018
++/* External Interrupt Control Register 1 */
++#define GPIO_EXINTCR1 0x0000001C
++/* IRN Capture Register */
++#define GPIO_IRNCR 0x00000020
++/* IRN Interrupt Configuration Register */
++#define GPIO_IRNCFG 0x0000002C
++/* IRN Interrupt Enable Set Register */
++#define GPIO_IRNRNSET 0x00000030
++/* IRN Interrupt Enable Clear Register */
++#define GPIO_IRNENCLR 0x00000034
++/* Output Set Register */
++#define GPIO_OUTSET 0x00000040
++/* Output Cler Register */
++#define GPIO_OUTCLR 0x00000044
++/* Direction Clear Register */
++#define GPIO_DIRSET 0x00000048
++/* Direction Set Register */
++#define GPIO_DIRCLR 0x0000004C
++
++/* turn a gpio_chip into a falcon_gpio_port */
++#define ctop(c) container_of(c, struct falcon_gpio_port, gpio_chip)
++/* turn a irq_data into a falcon_gpio_port */
++#define itop(i) ((struct falcon_gpio_port *) irq_get_chip_data(i->irq))
++
++#define port_r32(p, reg) ltq_r32(p->port + reg)
++#define port_w32(p, val, reg) ltq_w32(val, p->port + reg)
++#define port_w32_mask(p, clear, set, reg) \
++ port_w32(p, (port_r32(p, reg) & ~(clear)) | (set), reg)
++
++#define MAX_PORTS 5
++#define PINS_PER_PORT 32
++
++struct falcon_gpio_port {
++ struct gpio_chip gpio_chip;
++ void __iomem *port;
++ unsigned int irq_base;
++ unsigned int chained_irq;
++ struct clk *clk;
++ char name[6];
++};
++
++static int falcon_gpio_direction_input(struct gpio_chip *chip,
++ unsigned int offset)
++{
++ port_w32(ctop(chip), 1 << offset, GPIO_DIRCLR);
++
++ return 0;
++}
++
++static void falcon_gpio_set(struct gpio_chip *chip, unsigned int offset,
++ int value)
++{
++ if (value)
++ port_w32(ctop(chip), 1 << offset, GPIO_OUTSET);
++ else
++ port_w32(ctop(chip), 1 << offset, GPIO_OUTCLR);
++}
++
++static int falcon_gpio_direction_output(struct gpio_chip *chip,
++ unsigned int offset, int value)
++{
++ falcon_gpio_set(chip, offset, value);
++ port_w32(ctop(chip), 1 << offset, GPIO_DIRSET);
++
++ return 0;
++}
++
++static int falcon_gpio_get(struct gpio_chip *chip, unsigned int offset)
++{
++ if ((port_r32(ctop(chip), GPIO_DIR) >> offset) & 1)
++ return (port_r32(ctop(chip), GPIO_OUT) >> offset) & 1;
++ else
++ return (port_r32(ctop(chip), GPIO_IN) >> offset) & 1;
++}
++
++static int falcon_gpio_request(struct gpio_chip *chip, unsigned offset)
++{
++ int gpio = chip->base + offset;
++
++ return pinctrl_request_gpio(gpio);
++}
++
++static void falcon_gpio_free(struct gpio_chip *chip, unsigned offset)
++{
++ int gpio = chip->base + offset;
++
++ pinctrl_free_gpio(gpio);
++}
++
++static int falcon_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
++{
++ return ctop(chip)->irq_base + offset;
++}
++
++static void falcon_gpio_disable_irq(struct irq_data *d)
++{
++ unsigned int offset = d->irq - itop(d)->irq_base;
++
++ port_w32(itop(d), 1 << offset, GPIO_IRNENCLR);
++}
++
++static void falcon_gpio_enable_irq(struct irq_data *d)
++{
++ unsigned int offset = d->irq - itop(d)->irq_base;
++
++ port_w32(itop(d), 1 << offset, GPIO_IRNRNSET);
++}
++
++static void falcon_gpio_ack_irq(struct irq_data *d)
++{
++ unsigned int offset = d->irq - itop(d)->irq_base;
++
++ port_w32(itop(d), 1 << offset, GPIO_IRNCR);
++}
++
++static void falcon_gpio_mask_and_ack_irq(struct irq_data *d)
++{
++ unsigned int offset = d->irq - itop(d)->irq_base;
++
++ port_w32(itop(d), 1 << offset, GPIO_IRNENCLR);
++ port_w32(itop(d), 1 << offset, GPIO_IRNCR);
++}
++
++static struct irq_chip falcon_gpio_irq_chip;
++static int falcon_gpio_irq_type(struct irq_data *d, unsigned int type)
++{
++ unsigned int offset = d->irq - itop(d)->irq_base;
++ unsigned int mask = 1 << offset;
++
++ if ((type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_NONE)
++ return 0;
++
++ if ((type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) != 0) {
++ /* level triggered */
++ port_w32_mask(itop(d), 0, mask, GPIO_IRNCFG);
++ irq_set_chip_and_handler_name(d->irq,
++ &falcon_gpio_irq_chip, handle_level_irq, "mux");
++ } else {
++ /* edge triggered */
++ port_w32_mask(itop(d), mask, 0, GPIO_IRNCFG);
++ irq_set_chip_and_handler_name(d->irq,
++ &falcon_gpio_irq_chip, handle_simple_irq, "mux");
++ }
++
++ if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
++ port_w32_mask(itop(d), mask, 0, GPIO_EXINTCR0);
++ port_w32_mask(itop(d), 0, mask, GPIO_EXINTCR1);
++ } else {
++ if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH)) != 0)
++ /* positive logic: rising edge, high level */
++ port_w32_mask(itop(d), mask, 0, GPIO_EXINTCR0);
++ else
++ /* negative logic: falling edge, low level */
++ port_w32_mask(itop(d), 0, mask, GPIO_EXINTCR0);
++ port_w32_mask(itop(d), mask, 0, GPIO_EXINTCR1);
++ }
++
++ return gpio_direction_input(itop(d)->gpio_chip.base + offset);
++}
++
++static void falcon_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
++{
++ struct falcon_gpio_port *gpio_port = irq_desc_get_handler_data(desc);
++ unsigned long irncr;
++ int offset;
++
++ /* acknowledge interrupt */
++ irncr = port_r32(gpio_port, GPIO_IRNCR);
++ port_w32(gpio_port, irncr, GPIO_IRNCR);
++
++ desc->irq_data.chip->irq_ack(&desc->irq_data);
++
++ for_each_set_bit(offset, &irncr, gpio_port->gpio_chip.ngpio)
++ generic_handle_irq(gpio_port->irq_base + offset);
++}
++
++static int falcon_gpio_irq_map(struct irq_domain *d, unsigned int irq,
++ irq_hw_number_t hw)
++{
++ struct falcon_gpio_port *port = d->host_data;
++
++ irq_set_chip_and_handler_name(irq, &falcon_gpio_irq_chip,
++ handle_simple_irq, "mux");
++ irq_set_chip_data(irq, port);
++
++ /* set to negative logic (falling edge, low level) */
++ port_w32_mask(port, 0, 1 << hw, GPIO_EXINTCR0);
++ return 0;
++}
++
++static struct irq_chip falcon_gpio_irq_chip = {
++ .name = "gpio_irq_mux",
++ .irq_mask = falcon_gpio_disable_irq,
++ .irq_unmask = falcon_gpio_enable_irq,
++ .irq_ack = falcon_gpio_ack_irq,
++ .irq_mask_ack = falcon_gpio_mask_and_ack_irq,
++ .irq_set_type = falcon_gpio_irq_type,
++};
++
++static const struct irq_domain_ops irq_domain_ops = {
++ .xlate = irq_domain_xlate_onetwocell,
++ .map = falcon_gpio_irq_map,
++};
++
++static struct irqaction gpio_cascade = {
++ .handler = no_action,
++ .flags = IRQF_DISABLED,
++ .name = "gpio_cascade",
++};
++
++static int falcon_gpio_probe(struct platform_device *pdev)
++{
++ struct pinctrl_gpio_range *gpio_range;
++ struct device_node *node = pdev->dev.of_node;
++ const __be32 *bank = of_get_property(node, "lantiq,bank", NULL);
++ struct falcon_gpio_port *gpio_port;
++ struct resource *gpiores, irqres;
++ int ret, size;
++
++ if (!bank || *bank >= MAX_PORTS)
++ return -ENODEV;
++
++ size = pinctrl_falcon_get_range_size(*bank);
++ if (size < 1) {
++ dev_err(&pdev->dev, "pad not loaded for bank %d\n", *bank);
++ return size;
++ }
++
++ gpiores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!gpiores)
++ return -ENODEV;
++
++ gpio_range = devm_kzalloc(&pdev->dev, sizeof(struct pinctrl_gpio_range),
++ GFP_KERNEL);
++ if (!gpio_range)
++ return -ENOMEM;
++
++ gpio_port = devm_kzalloc(&pdev->dev, sizeof(struct falcon_gpio_port),
++ GFP_KERNEL);
++ if (!gpio_port)
++ return -ENOMEM;
++ snprintf(gpio_port->name, 6, "gpio%d", *bank);
++ gpio_port->gpio_chip.label = gpio_port->name;
++ gpio_port->gpio_chip.direction_input = falcon_gpio_direction_input;
++ gpio_port->gpio_chip.direction_output = falcon_gpio_direction_output;
++ gpio_port->gpio_chip.get = falcon_gpio_get;
++ gpio_port->gpio_chip.set = falcon_gpio_set;
++ gpio_port->gpio_chip.request = falcon_gpio_request;
++ gpio_port->gpio_chip.free = falcon_gpio_free;
++ gpio_port->gpio_chip.base = -1;
++ gpio_port->gpio_chip.ngpio = size;
++ gpio_port->gpio_chip.dev = &pdev->dev;
++
++ gpio_port->port = devm_request_and_ioremap(&pdev->dev, gpiores);
++ if (!gpio_port->port) {
++ dev_err(&pdev->dev, "Could not map io ranges\n");
++ return -ENOMEM;
++ }
++
++ gpio_port->clk = clk_get(&pdev->dev, NULL);
++ if (IS_ERR(gpio_port->clk)) {
++ dev_err(&pdev->dev, "Could not get clock\n");
++ return PTR_ERR(gpio_port->clk);
++ }
++ clk_enable(gpio_port->clk);
++
++ if (of_irq_to_resource_table(node, &irqres, 1) == 1) {
++ gpio_port->irq_base = INT_NUM_EXTRA_START + (32 * *bank);
++ gpio_port->gpio_chip.to_irq = falcon_gpio_to_irq;
++ gpio_port->chained_irq = irqres.start;
++ irq_domain_add_legacy(node, size, gpio_port->irq_base, 0,
++ &irq_domain_ops, gpio_port);
++ setup_irq(irqres.start, &gpio_cascade);
++ irq_set_handler_data(irqres.start, gpio_port);
++ irq_set_chained_handler(irqres.start, falcon_gpio_irq_handler);
++ }
++
++ ret = gpiochip_add(&gpio_port->gpio_chip);
++ if (!ret)
++ platform_set_drvdata(pdev, gpio_port);
++
++ gpio_range->name = "FALCON GPIO";
++ gpio_range->id = *bank;
++ gpio_range->base = gpio_port->gpio_chip.base;
++ gpio_range->npins = gpio_port->gpio_chip.ngpio;
++ gpio_range->gc = &gpio_port->gpio_chip;
++ pinctrl_falcon_add_gpio_range(gpio_range);
++
++ return ret;
++}
++
++static const struct of_device_id falcon_gpio_match[] = {
++ { .compatible = "lantiq,gpio-falcon" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, falcon_gpio_match);
++
++static struct platform_driver falcon_gpio_driver = {
++ .probe = falcon_gpio_probe,
++ .driver = {
++ .name = "gpio-falcon",
++ .owner = THIS_MODULE,
++ .of_match_table = falcon_gpio_match,
++ },
++};
++
++int __init falcon_gpio_init(void)
++{
++ int ret;
++
++ pr_info("FALC(tm) ON GPIO Driver, (C) 2012 Lantiq Deutschland Gmbh\n");
++ ret = platform_driver_register(&falcon_gpio_driver);
++ if (ret)
++ pr_err("falcon_gpio: Error registering platform driver!");
++ return ret;
++}
++
++subsys_initcall(falcon_gpio_init);
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0022-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch b/target/linux/lantiq/patches-3.8/0022-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
new file mode 100644
index 0000000..9427758
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0022-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
@@ -0,0 +1,1047 @@
+From 09628160c97e9bd7dfbb39fd467cf17f1e43e85c Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 20 May 2012 00:42:39 +0200
+Subject: [PATCH 22/40] I2C: MIPS: lantiq: add FALC-ON i2c bus master
+
+This patch adds the driver needed to make the I2C bus work on FALC-ON SoCs.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/i2c/busses/Kconfig | 10 +
+ drivers/i2c/busses/Makefile | 1 +
+ drivers/i2c/busses/i2c-lantiq.c | 747 +++++++++++++++++++++++++++++++++++++++
+ drivers/i2c/busses/i2c-lantiq.h | 234 ++++++++++++
+ 4 files changed, 992 insertions(+)
+ create mode 100644 drivers/i2c/busses/i2c-lantiq.c
+ create mode 100644 drivers/i2c/busses/i2c-lantiq.h
+
+diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
+index bdca511..5e2994f 100644
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -470,6 +470,16 @@ config I2C_IOP3XX
+ This driver can also be built as a module. If so, the module
+ will be called i2c-iop3xx.
+
++config I2C_LANTIQ
++ tristate "Lantiq I2C interface"
++ depends on LANTIQ && SOC_FALCON
++ help
++ If you say yes to this option, support will be included for the
++ Lantiq I2C core.
++
++ This driver can also be built as a module. If so, the module
++ will be called i2c-lantiq.
++
+ config I2C_MPC
+ tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
+ depends on PPC
+diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
+index 6181f3f..40ea7d8 100644
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -46,6 +46,7 @@ obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
+ obj-$(CONFIG_I2C_IMX) += i2c-imx.o
+ obj-$(CONFIG_I2C_INTEL_MID) += i2c-intel-mid.o
+ obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
++obj-$(CONFIG_I2C_LANTIQ) += i2c-lantiq.o
+ obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
+ obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o
+ obj-$(CONFIG_I2C_MXS) += i2c-mxs.o
+diff --git a/drivers/i2c/busses/i2c-lantiq.c b/drivers/i2c/busses/i2c-lantiq.c
+new file mode 100644
+index 0000000..9a5f58b
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-lantiq.c
+@@ -0,0 +1,747 @@
++
++/*
++ * Lantiq I2C bus adapter
++ *
++ * Parts based on i2c-designware.c and other i2c drivers from Linux 2.6.33
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ * Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com>
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/slab.h> /* for kzalloc, kfree */
++#include <linux/i2c.h>
++#include <linux/errno.h>
++#include <linux/completion.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/of_irq.h>
++#include <linux/of_i2c.h>
++
++#include <lantiq_soc.h>
++#include "i2c-lantiq.h"
++
++/*
++ * CURRENT ISSUES:
++ * - no high speed support
++ * - ten bit mode is not tested (no slave devices)
++ */
++
++/* access macros */
++#define i2c_r32(reg) \
++ __raw_readl(&(priv->membase)->reg)
++#define i2c_w32(val, reg) \
++ __raw_writel(val, &(priv->membase)->reg)
++#define i2c_w32_mask(clear, set, reg) \
++ i2c_w32((i2c_r32(reg) & ~(clear)) | (set), reg)
++
++#define DRV_NAME "i2c-lantiq"
++#define DRV_VERSION "1.00"
++
++#define LTQ_I2C_BUSY_TIMEOUT 20 /* ms */
++
++#ifdef DEBUG
++#define LTQ_I2C_XFER_TIMEOUT (25*HZ)
++#else
++#define LTQ_I2C_XFER_TIMEOUT HZ
++#endif
++
++#define LTQ_I2C_IMSC_DEFAULT_MASK (I2C_IMSC_I2C_P_INT_EN | \
++ I2C_IMSC_I2C_ERR_INT_EN)
++
++#define LTQ_I2C_ARB_LOST (1 << 0)
++#define LTQ_I2C_NACK (1 << 1)
++#define LTQ_I2C_RX_UFL (1 << 2)
++#define LTQ_I2C_RX_OFL (1 << 3)
++#define LTQ_I2C_TX_UFL (1 << 4)
++#define LTQ_I2C_TX_OFL (1 << 5)
++
++struct ltq_i2c {
++ struct mutex mutex;
++
++
++ /* active clock settings */
++ unsigned int input_clock; /* clock input for i2c hardware block */
++ unsigned int i2c_clock; /* approximated bus clock in kHz */
++
++ struct clk *clk_gate;
++ struct clk *clk_input;
++
++
++ /* resources (memory and interrupts) */
++ int irq_lb; /* last burst irq */
++
++ struct lantiq_reg_i2c __iomem *membase; /* base of mapped registers */
++
++ struct i2c_adapter adap;
++ struct device *dev;
++
++ struct completion cmd_complete;
++
++
++ /* message transfer data */
++ struct i2c_msg *current_msg; /* current message */
++ int msgs_num; /* number of messages to handle */
++ u8 *msg_buf; /* current buffer */
++ u32 msg_buf_len; /* remaining length of current buffer */
++ int msg_err; /* error status of the current transfer */
++
++
++ /* master status codes */
++ enum {
++ STATUS_IDLE,
++ STATUS_ADDR, /* address phase */
++ STATUS_WRITE,
++ STATUS_READ,
++ STATUS_READ_END,
++ STATUS_STOP
++ } status;
++};
++
++static irqreturn_t ltq_i2c_isr(int irq, void *dev_id);
++
++static inline void enable_burst_irq(struct ltq_i2c *priv)
++{
++ i2c_w32_mask(0, I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, imsc);
++}
++static inline void disable_burst_irq(struct ltq_i2c *priv)
++{
++ i2c_w32_mask(I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, 0, imsc);
++}
++
++static void prepare_msg_send_addr(struct ltq_i2c *priv)
++{
++ struct i2c_msg *msg = priv->current_msg;
++ int rd = !!(msg->flags & I2C_M_RD); /* extends to 0 or 1 */
++ u16 addr = msg->addr;
++
++ /* new i2c_msg */
++ priv->msg_buf = msg->buf;
++ priv->msg_buf_len = msg->len;
++ if (rd)
++ priv->status = STATUS_READ;
++ else
++ priv->status = STATUS_WRITE;
++
++ /* send slave address */
++ if (msg->flags & I2C_M_TEN) {
++ i2c_w32(0xf0 | ((addr & 0x300) >> 7) | rd, txd);
++ i2c_w32(addr & 0xff, txd);
++ } else {
++ i2c_w32((addr & 0x7f) << 1 | rd, txd);
++ }
++}
++
++static void ltq_i2c_set_tx_len(struct ltq_i2c *priv)
++{
++ struct i2c_msg *msg = priv->current_msg;
++ int len = (msg->flags & I2C_M_TEN) ? 2 : 1;
++
++ pr_debug("set_tx_len %cX\n", (msg->flags & I2C_M_RD) ? 'R' : 'T');
++
++ priv->status = STATUS_ADDR;
++
++ if (!(msg->flags & I2C_M_RD))
++ len += msg->len;
++ else
++ /* set maximum received packet size (before rx int!) */
++ i2c_w32(msg->len, mrps_ctrl);
++ i2c_w32(len, tps_ctrl);
++ enable_burst_irq(priv);
++}
++
++static int ltq_i2c_hw_set_clock(struct i2c_adapter *adap)
++{
++ struct ltq_i2c *priv = i2c_get_adapdata(adap);
++ unsigned int input_clock = clk_get_rate(priv->clk_input);
++ u32 dec, inc = 1;
++
++ /* clock changed? */
++ if (priv->input_clock == input_clock)
++ return 0;
++
++ /*
++ * this formula is only an approximation, found by the recommended
++ * values in the "I2C Architecture Specification 1.7.1"
++ */
++ dec = input_clock / (priv->i2c_clock * 2);
++ if (dec <= 6)
++ return -ENXIO;
++
++ i2c_w32(0, fdiv_high_cfg);
++ i2c_w32((inc << I2C_FDIV_CFG_INC_OFFSET) |
++ (dec << I2C_FDIV_CFG_DEC_OFFSET),
++ fdiv_cfg);
++
++ dev_info(priv->dev, "setup clocks (in %d kHz, bus %d kHz, dec=%d)\n",
++ input_clock, priv->i2c_clock, dec);
++
++ priv->input_clock = input_clock;
++ return 0;
++}
++
++static int ltq_i2c_hw_init(struct i2c_adapter *adap)
++{
++ int ret = 0;
++ struct ltq_i2c *priv = i2c_get_adapdata(adap);
++
++ /* disable bus */
++ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
++
++#ifndef DEBUG
++ /* set normal operation clock divider */
++ i2c_w32(1 << I2C_CLC_RMC_OFFSET, clc);
++#else
++ /* for debugging a higher divider value! */
++ i2c_w32(0xF0 << I2C_CLC_RMC_OFFSET, clc);
++#endif
++
++ /* setup clock */
++ ret = ltq_i2c_hw_set_clock(adap);
++ if (ret != 0) {
++ dev_warn(priv->dev, "invalid clock settings\n");
++ return ret;
++ }
++
++ /* configure fifo */
++ i2c_w32(I2C_FIFO_CFG_TXFC | /* tx fifo as flow controller */
++ I2C_FIFO_CFG_RXFC | /* rx fifo as flow controller */
++ I2C_FIFO_CFG_TXFA_TXFA2 | /* tx fifo 4-byte aligned */
++ I2C_FIFO_CFG_RXFA_RXFA2 | /* rx fifo 4-byte aligned */
++ I2C_FIFO_CFG_TXBS_TXBS0 | /* tx fifo burst size is 1 word */
++ I2C_FIFO_CFG_RXBS_RXBS0, /* rx fifo burst size is 1 word */
++ fifo_cfg);
++
++ /* configure address */
++ i2c_w32(I2C_ADDR_CFG_SOPE_EN | /* generate stop when no more data in
++ the fifo */
++ I2C_ADDR_CFG_SONA_EN | /* generate stop when NA received */
++ I2C_ADDR_CFG_MnS_EN | /* we are master device */
++ 0, /* our slave address (not used!) */
++ addr_cfg);
++
++ /* enable bus */
++ i2c_w32_mask(0, I2C_RUN_CTRL_RUN_EN, run_ctrl);
++
++ return 0;
++}
++
++static int ltq_i2c_wait_bus_not_busy(struct ltq_i2c *priv)
++{
++ unsigned long timeout;
++
++ timeout = jiffies + msecs_to_jiffies(LTQ_I2C_BUSY_TIMEOUT);
++
++ do {
++ u32 stat = i2c_r32(bus_stat);
++
++ if ((stat & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_FREE)
++ return 0;
++
++ cond_resched();
++ } while (!time_after_eq(jiffies, timeout));
++
++ dev_err(priv->dev, "timeout waiting for bus ready\n");
++ return -ETIMEDOUT;
++}
++
++static void ltq_i2c_tx(struct ltq_i2c *priv, int last)
++{
++ if (priv->msg_buf_len && priv->msg_buf) {
++ i2c_w32(*priv->msg_buf, txd);
++
++ if (--priv->msg_buf_len)
++ priv->msg_buf++;
++ else
++ priv->msg_buf = NULL;
++ } else {
++ last = 1;
++ }
++
++ if (last)
++ disable_burst_irq(priv);
++}
++
++static void ltq_i2c_rx(struct ltq_i2c *priv, int last)
++{
++ u32 fifo_stat, timeout;
++ if (priv->msg_buf_len && priv->msg_buf) {
++ timeout = 5000000;
++ do {
++ fifo_stat = i2c_r32(ffs_stat);
++ } while (!fifo_stat && --timeout);
++ if (!timeout) {
++ last = 1;
++ pr_debug("\nrx timeout\n");
++ goto err;
++ }
++ while (fifo_stat) {
++ *priv->msg_buf = i2c_r32(rxd);
++ if (--priv->msg_buf_len) {
++ priv->msg_buf++;
++ } else {
++ priv->msg_buf = NULL;
++ last = 1;
++ break;
++ }
++ /*
++ * do not read more than burst size, otherwise no "last
++ * burst" is generated and the transaction is blocked!
++ */
++ fifo_stat = 0;
++ }
++ } else {
++ last = 1;
++ }
++err:
++ if (last) {
++ disable_burst_irq(priv);
++
++ if (priv->status == STATUS_READ_END) {
++ /*
++ * do the STATUS_STOP and complete() here, as sometimes
++ * the tx_end is already seen before this is finished
++ */
++ priv->status = STATUS_STOP;
++ complete(&priv->cmd_complete);
++ } else {
++ i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
++ priv->status = STATUS_READ_END;
++ }
++ }
++}
++
++static void ltq_i2c_xfer_init(struct ltq_i2c *priv)
++{
++ /* enable interrupts */
++ i2c_w32(LTQ_I2C_IMSC_DEFAULT_MASK, imsc);
++
++ /* trigger transfer of first msg */
++ ltq_i2c_set_tx_len(priv);
++}
++
++static void dump_msgs(struct i2c_msg msgs[], int num, int rx)
++{
++#if defined(DEBUG)
++ int i, j;
++ pr_debug("Messages %d %s\n", num, rx ? "out" : "in");
++ for (i = 0; i < num; i++) {
++ pr_debug("%2d %cX Msg(%d) addr=0x%X: ", i,
++ (msgs[i].flags & I2C_M_RD) ? 'R' : 'T',
++ msgs[i].len, msgs[i].addr);
++ if (!(msgs[i].flags & I2C_M_RD) || rx) {
++ for (j = 0; j < msgs[i].len; j++)
++ pr_debug("%02X ", msgs[i].buf[j]);
++ }
++ pr_debug("\n");
++ }
++#endif
++}
++
++static void ltq_i2c_release_bus(struct ltq_i2c *priv)
++{
++ if ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_BM)
++ i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
++}
++
++static int ltq_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
++ int num)
++{
++ struct ltq_i2c *priv = i2c_get_adapdata(adap);
++ int ret;
++
++ dev_dbg(priv->dev, "xfer %u messages\n", num);
++ dump_msgs(msgs, num, 0);
++
++ mutex_lock(&priv->mutex);
++
++ INIT_COMPLETION(priv->cmd_complete);
++ priv->current_msg = msgs;
++ priv->msgs_num = num;
++ priv->msg_err = 0;
++ priv->status = STATUS_IDLE;
++
++ /* wait for the bus to become ready */
++ ret = ltq_i2c_wait_bus_not_busy(priv);
++ if (ret)
++ goto done;
++
++ while (priv->msgs_num) {
++ /* start the transfers */
++ ltq_i2c_xfer_init(priv);
++
++ /* wait for transfers to complete */
++ ret = wait_for_completion_interruptible_timeout(
++ &priv->cmd_complete, LTQ_I2C_XFER_TIMEOUT);
++ if (ret == 0) {
++ dev_err(priv->dev, "controller timed out\n");
++ ltq_i2c_hw_init(adap);
++ ret = -ETIMEDOUT;
++ goto done;
++ } else if (ret < 0)
++ goto done;
++
++ if (priv->msg_err) {
++ if (priv->msg_err & LTQ_I2C_NACK)
++ ret = -ENXIO;
++ else
++ ret = -EREMOTEIO;
++ goto done;
++ }
++ if (--priv->msgs_num)
++ priv->current_msg++;
++ }
++ /* no error? */
++ ret = num;
++
++done:
++ ltq_i2c_release_bus(priv);
++
++ mutex_unlock(&priv->mutex);
++
++ if (ret >= 0)
++ dump_msgs(msgs, num, 1);
++
++ pr_debug("XFER ret %d\n", ret);
++ return ret;
++}
++
++static irqreturn_t ltq_i2c_isr_burst(int irq, void *dev_id)
++{
++ struct ltq_i2c *priv = dev_id;
++ struct i2c_msg *msg = priv->current_msg;
++ int last = (irq == priv->irq_lb);
++
++ if (last)
++ pr_debug("LB ");
++ else
++ pr_debug("B ");
++
++ if (msg->flags & I2C_M_RD) {
++ switch (priv->status) {
++ case STATUS_ADDR:
++ pr_debug("X");
++ prepare_msg_send_addr(priv);
++ disable_burst_irq(priv);
++ break;
++ case STATUS_READ:
++ case STATUS_READ_END:
++ pr_debug("R");
++ ltq_i2c_rx(priv, last);
++ break;
++ default:
++ disable_burst_irq(priv);
++ pr_warn("Status R %d\n", priv->status);
++ break;
++ }
++ } else {
++ switch (priv->status) {
++ case STATUS_ADDR:
++ pr_debug("x");
++ prepare_msg_send_addr(priv);
++ break;
++ case STATUS_WRITE:
++ pr_debug("w");
++ ltq_i2c_tx(priv, last);
++ break;
++ default:
++ disable_burst_irq(priv);
++ pr_warn("Status W %d\n", priv->status);
++ break;
++ }
++ }
++
++ i2c_w32(I2C_ICR_BREQ_INT_CLR | I2C_ICR_LBREQ_INT_CLR, icr);
++ return IRQ_HANDLED;
++}
++
++static void ltq_i2c_isr_prot(struct ltq_i2c *priv)
++{
++ u32 i_pro = i2c_r32(p_irqss);
++
++ pr_debug("i2c-p");
++
++ /* not acknowledge */
++ if (i_pro & I2C_P_IRQSS_NACK) {
++ priv->msg_err |= LTQ_I2C_NACK;
++ pr_debug(" nack");
++ }
++
++ /* arbitration lost */
++ if (i_pro & I2C_P_IRQSS_AL) {
++ priv->msg_err |= LTQ_I2C_ARB_LOST;
++ pr_debug(" arb-lost");
++ }
++ /* tx -> rx switch */
++ if (i_pro & I2C_P_IRQSS_RX)
++ pr_debug(" rx");
++
++ /* tx end */
++ if (i_pro & I2C_P_IRQSS_TX_END)
++ pr_debug(" txend");
++ pr_debug("\n");
++
++ if (!priv->msg_err) {
++ /* tx -> rx switch */
++ if (i_pro & I2C_P_IRQSS_RX) {
++ priv->status = STATUS_READ;
++ enable_burst_irq(priv);
++ }
++ if (i_pro & I2C_P_IRQSS_TX_END) {
++ if (priv->status == STATUS_READ)
++ priv->status = STATUS_READ_END;
++ else {
++ disable_burst_irq(priv);
++ priv->status = STATUS_STOP;
++ }
++ }
++ }
++
++ i2c_w32(i_pro, p_irqsc);
++}
++
++static irqreturn_t ltq_i2c_isr(int irq, void *dev_id)
++{
++ u32 i_raw, i_err = 0;
++ struct ltq_i2c *priv = dev_id;
++
++ i_raw = i2c_r32(mis);
++ pr_debug("i_raw 0x%08X\n", i_raw);
++
++ /* error interrupt */
++ if (i_raw & I2C_RIS_I2C_ERR_INT_INTOCC) {
++ i_err = i2c_r32(err_irqss);
++ pr_debug("i_err 0x%08X bus_stat 0x%04X\n",
++ i_err, i2c_r32(bus_stat));
++
++ /* tx fifo overflow (8) */
++ if (i_err & I2C_ERR_IRQSS_TXF_OFL)
++ priv->msg_err |= LTQ_I2C_TX_OFL;
++
++ /* tx fifo underflow (4) */
++ if (i_err & I2C_ERR_IRQSS_TXF_UFL)
++ priv->msg_err |= LTQ_I2C_TX_UFL;
++
++ /* rx fifo overflow (2) */
++ if (i_err & I2C_ERR_IRQSS_RXF_OFL)
++ priv->msg_err |= LTQ_I2C_RX_OFL;
++
++ /* rx fifo underflow (1) */
++ if (i_err & I2C_ERR_IRQSS_RXF_UFL)
++ priv->msg_err |= LTQ_I2C_RX_UFL;
++
++ i2c_w32(i_err, err_irqsc);
++ }
++
++ /* protocol interrupt */
++ if (i_raw & I2C_RIS_I2C_P_INT_INTOCC)
++ ltq_i2c_isr_prot(priv);
++
++ if ((priv->msg_err) || (priv->status == STATUS_STOP))
++ complete(&priv->cmd_complete);
++
++ return IRQ_HANDLED;
++}
++
++static u32 ltq_i2c_functionality(struct i2c_adapter *adap)
++{
++ return I2C_FUNC_I2C |
++ I2C_FUNC_10BIT_ADDR |
++ I2C_FUNC_SMBUS_EMUL;
++}
++
++static struct i2c_algorithm ltq_i2c_algorithm = {
++ .master_xfer = ltq_i2c_xfer,
++ .functionality = ltq_i2c_functionality,
++};
++
++static int __devinit ltq_i2c_probe(struct platform_device *pdev)
++{
++ struct device_node *node = pdev->dev.of_node;
++ struct ltq_i2c *priv;
++ struct i2c_adapter *adap;
++ struct resource *mmres, irqres[4];
++ int ret = 0;
++
++ dev_dbg(&pdev->dev, "probing\n");
++
++ mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ ret = of_irq_to_resource_table(node, irqres, 4);
++ if (!mmres || (ret != 4)) {
++ dev_err(&pdev->dev, "no resources\n");
++ return -ENODEV;
++ }
++
++ /* allocate private data */
++ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
++ if (!priv) {
++ dev_err(&pdev->dev, "can't allocate private data\n");
++ return -ENOMEM;
++ }
++
++ adap = &priv->adap;
++ i2c_set_adapdata(adap, priv);
++ adap->owner = THIS_MODULE;
++ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
++ strlcpy(adap->name, DRV_NAME "-adapter", sizeof(adap->name));
++ adap->algo = &ltq_i2c_algorithm;
++
++ if (of_property_read_u32(node, "clock-frequency", &priv->i2c_clock)) {
++ dev_warn(&pdev->dev, "No I2C speed selected, using 100kHz\n");
++ priv->i2c_clock = 100000;
++ }
++
++ init_completion(&priv->cmd_complete);
++ mutex_init(&priv->mutex);
++
++ priv->membase = devm_request_and_ioremap(&pdev->dev, mmres);
++ if (priv->membase == NULL)
++ return -ENOMEM;
++
++ priv->dev = &pdev->dev;
++ priv->irq_lb = irqres[0].start;
++
++ ret = devm_request_irq(&pdev->dev, irqres[0].start, ltq_i2c_isr_burst,
++ IRQF_DISABLED, "i2c lb", priv);
++ if (ret) {
++ dev_err(&pdev->dev, "can't get last burst IRQ %d\n",
++ irqres[0].start);
++ return -ENODEV;
++ }
++
++ ret = devm_request_irq(&pdev->dev, irqres[1].start, ltq_i2c_isr_burst,
++ IRQF_DISABLED, "i2c b", priv);
++ if (ret) {
++ dev_err(&pdev->dev, "can't get burst IRQ %d\n",
++ irqres[1].start);
++ return -ENODEV;
++ }
++
++ ret = devm_request_irq(&pdev->dev, irqres[2].start, ltq_i2c_isr,
++ IRQF_DISABLED, "i2c err", priv);
++ if (ret) {
++ dev_err(&pdev->dev, "can't get error IRQ %d\n",
++ irqres[2].start);
++ return -ENODEV;
++ }
++
++ ret = devm_request_irq(&pdev->dev, irqres[3].start, ltq_i2c_isr,
++ IRQF_DISABLED, "i2c p", priv);
++ if (ret) {
++ dev_err(&pdev->dev, "can't get protocol IRQ %d\n",
++ irqres[3].start);
++ return -ENODEV;
++ }
++
++ dev_dbg(&pdev->dev, "mapped io-space to %p\n", priv->membase);
++ dev_dbg(&pdev->dev, "use IRQs %d, %d, %d, %d\n", irqres[0].start,
++ irqres[1].start, irqres[2].start, irqres[3].start);
++
++ priv->clk_gate = devm_clk_get(&pdev->dev, NULL);
++ if (IS_ERR(priv->clk_gate)) {
++ dev_err(&pdev->dev, "failed to get i2c clk\n");
++ return -ENOENT;
++ }
++
++ /* this is a static clock, which has no refcounting */
++ priv->clk_input = clk_get_fpi();
++ if (IS_ERR(priv->clk_input)) {
++ dev_err(&pdev->dev, "failed to get fpi clk\n");
++ return -ENOENT;
++ }
++
++ clk_activate(priv->clk_gate);
++
++ /* add our adapter to the i2c stack */
++ ret = i2c_add_numbered_adapter(adap);
++ if (ret) {
++ dev_err(&pdev->dev, "can't register I2C adapter\n");
++ goto out;
++ }
++
++ platform_set_drvdata(pdev, priv);
++ i2c_set_adapdata(adap, priv);
++
++ /* print module version information */
++ dev_dbg(&pdev->dev, "module id=%u revision=%u\n",
++ (i2c_r32(id) & I2C_ID_ID_MASK) >> I2C_ID_ID_OFFSET,
++ (i2c_r32(id) & I2C_ID_REV_MASK) >> I2C_ID_REV_OFFSET);
++
++ /* initialize HW */
++ ret = ltq_i2c_hw_init(adap);
++ if (ret) {
++ dev_err(&pdev->dev, "can't configure adapter\n");
++ i2c_del_adapter(adap);
++ platform_set_drvdata(pdev, NULL);
++ } else {
++ dev_info(&pdev->dev, "version %s\n", DRV_VERSION);
++ }
++
++ of_i2c_register_devices(adap);
++
++out:
++ /* if init failed, we need to deactivate the clock gate */
++ if (ret)
++ clk_deactivate(priv->clk_gate);
++
++ return ret;
++}
++
++static int __devexit ltq_i2c_remove(struct platform_device *pdev)
++{
++ struct ltq_i2c *priv = platform_get_drvdata(pdev);
++
++ /* disable bus */
++ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
++
++ /* power down the core */
++ clk_deactivate(priv->clk_gate);
++
++ /* remove driver */
++ i2c_del_adapter(&priv->adap);
++ kfree(priv);
++
++ dev_dbg(&pdev->dev, "removed\n");
++ platform_set_drvdata(pdev, NULL);
++
++ return 0;
++}
++static const struct of_device_id ltq_i2c_match[] = {
++ { .compatible = "lantiq,lantiq-i2c" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, ltq_i2c_match);
++
++static struct platform_driver ltq_i2c_driver = {
++ .probe = ltq_i2c_probe,
++ .remove = __devexit_p(ltq_i2c_remove),
++ .driver = {
++ .name = DRV_NAME,
++ .owner = THIS_MODULE,
++ .of_match_table = ltq_i2c_match,
++ },
++};
++
++module_platform_driver(ltq_i2c_driver);
++
++MODULE_DESCRIPTION("Lantiq I2C bus adapter");
++MODULE_AUTHOR("Thomas Langer <thomas.langer@lantiq.com>");
++MODULE_ALIAS("platform:" DRV_NAME);
++MODULE_LICENSE("GPL");
++MODULE_VERSION(DRV_VERSION);
+diff --git a/drivers/i2c/busses/i2c-lantiq.h b/drivers/i2c/busses/i2c-lantiq.h
+new file mode 100644
+index 0000000..7a86b89
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-lantiq.h
+@@ -0,0 +1,234 @@
++#ifndef I2C_LANTIQ_H
++#define I2C_LANTIQ_H
++
++/* I2C register structure */
++struct lantiq_reg_i2c {
++ /* I2C Kernel Clock Control Register */
++ unsigned int clc; /* 0x00000000 */
++ /* Reserved */
++ unsigned int res_0; /* 0x00000004 */
++ /* I2C Identification Register */
++ unsigned int id; /* 0x00000008 */
++ /* Reserved */
++ unsigned int res_1; /* 0x0000000C */
++ /*
++ * I2C RUN Control Register
++ * This register enables and disables the I2C peripheral. Before
++ * enabling, the I2C has to be configured properly. After enabling
++ * no configuration is possible
++ */
++ unsigned int run_ctrl; /* 0x00000010 */
++ /*
++ * I2C End Data Control Register
++ * This register is used to either turn around the data transmission
++ * direction or to address another slave without sending a stop
++ * condition. Also the software can stop the slave-transmitter by
++ * sending a not-accolade when working as master-receiver or even
++ * stop data transmission immediately when operating as
++ * master-transmitter. The writing to the bits of this control
++ * register is only effective when in MASTER RECEIVES BYTES, MASTER
++ * TRANSMITS BYTES, MASTER RESTART or SLAVE RECEIVE BYTES state
++ */
++ unsigned int endd_ctrl; /* 0x00000014 */
++ /*
++ * I2C Fractional Divider Configuration Register
++ * These register is used to program the fractional divider of the I2C
++ * bus. Before the peripheral is switched on by setting the RUN-bit the
++ * two (fixed) values for the two operating frequencies are programmed
++ * into these (configuration) registers. The Register FDIV_HIGH_CFG has
++ * the same layout as I2C_FDIV_CFG.
++ */
++ unsigned int fdiv_cfg; /* 0x00000018 */
++ /*
++ * I2C Fractional Divider (highspeed mode) Configuration Register
++ * These register is used to program the fractional divider of the I2C
++ * bus. Before the peripheral is switched on by setting the RUN-bit the
++ * two (fixed) values for the two operating frequencies are programmed
++ * into these (configuration) registers. The Register FDIV_CFG has the
++ * same layout as I2C_FDIV_CFG.
++ */
++ unsigned int fdiv_high_cfg; /* 0x0000001C */
++ /* I2C Address Configuration Register */
++ unsigned int addr_cfg; /* 0x00000020 */
++ /* I2C Bus Status Register
++ * This register gives a status information of the I2C. This additional
++ * information can be used by the software to start proper actions.
++ */
++ unsigned int bus_stat; /* 0x00000024 */
++ /* I2C FIFO Configuration Register */
++ unsigned int fifo_cfg; /* 0x00000028 */
++ /* I2C Maximum Received Packet Size Register */
++ unsigned int mrps_ctrl; /* 0x0000002C */
++ /* I2C Received Packet Size Status Register */
++ unsigned int rps_stat; /* 0x00000030 */
++ /* I2C Transmit Packet Size Register */
++ unsigned int tps_ctrl; /* 0x00000034 */
++ /* I2C Filled FIFO Stages Status Register */
++ unsigned int ffs_stat; /* 0x00000038 */
++ /* Reserved */
++ unsigned int res_2; /* 0x0000003C */
++ /* I2C Timing Configuration Register */
++ unsigned int tim_cfg; /* 0x00000040 */
++ /* Reserved */
++ unsigned int res_3[7]; /* 0x00000044 */
++ /* I2C Error Interrupt Request Source Mask Register */
++ unsigned int err_irqsm; /* 0x00000060 */
++ /* I2C Error Interrupt Request Source Status Register */
++ unsigned int err_irqss; /* 0x00000064 */
++ /* I2C Error Interrupt Request Source Clear Register */
++ unsigned int err_irqsc; /* 0x00000068 */
++ /* Reserved */
++ unsigned int res_4; /* 0x0000006C */
++ /* I2C Protocol Interrupt Request Source Mask Register */
++ unsigned int p_irqsm; /* 0x00000070 */
++ /* I2C Protocol Interrupt Request Source Status Register */
++ unsigned int p_irqss; /* 0x00000074 */
++ /* I2C Protocol Interrupt Request Source Clear Register */
++ unsigned int p_irqsc; /* 0x00000078 */
++ /* Reserved */
++ unsigned int res_5; /* 0x0000007C */
++ /* I2C Raw Interrupt Status Register */
++ unsigned int ris; /* 0x00000080 */
++ /* I2C Interrupt Mask Control Register */
++ unsigned int imsc; /* 0x00000084 */
++ /* I2C Masked Interrupt Status Register */
++ unsigned int mis; /* 0x00000088 */
++ /* I2C Interrupt Clear Register */
++ unsigned int icr; /* 0x0000008C */
++ /* I2C Interrupt Set Register */
++ unsigned int isr; /* 0x00000090 */
++ /* I2C DMA Enable Register */
++ unsigned int dmae; /* 0x00000094 */
++ /* Reserved */
++ unsigned int res_6[8154]; /* 0x00000098 */
++ /* I2C Transmit Data Register */
++ unsigned int txd; /* 0x00008000 */
++ /* Reserved */
++ unsigned int res_7[4095]; /* 0x00008004 */
++ /* I2C Receive Data Register */
++ unsigned int rxd; /* 0x0000C000 */
++ /* Reserved */
++ unsigned int res_8[4095]; /* 0x0000C004 */
++};
++
++/*
++ * Clock Divider for Normal Run Mode
++ * Max 8-bit divider value. IF RMC is 0 the module is disabled. Note: As long
++ * as the new divider value RMC is not valid, the register returns 0x0000 00xx
++ * on reading.
++ */
++#define I2C_CLC_RMC_MASK 0x0000FF00
++/* field offset */
++#define I2C_CLC_RMC_OFFSET 8
++
++/* Fields of "I2C Identification Register" */
++/* Module ID */
++#define I2C_ID_ID_MASK 0x0000FF00
++/* field offset */
++#define I2C_ID_ID_OFFSET 8
++/* Revision */
++#define I2C_ID_REV_MASK 0x000000FF
++/* field offset */
++#define I2C_ID_REV_OFFSET 0
++
++/* Fields of "I2C Interrupt Mask Control Register" */
++/* Enable */
++#define I2C_IMSC_BREQ_INT_EN 0x00000008
++/* Enable */
++#define I2C_IMSC_LBREQ_INT_EN 0x00000004
++
++/* Fields of "I2C Fractional Divider Configuration Register" */
++/* field offset */
++#define I2C_FDIV_CFG_INC_OFFSET 16
++
++/* Fields of "I2C Interrupt Mask Control Register" */
++/* Enable */
++#define I2C_IMSC_I2C_P_INT_EN 0x00000020
++/* Enable */
++#define I2C_IMSC_I2C_ERR_INT_EN 0x00000010
++
++/* Fields of "I2C Error Interrupt Request Source Status Register" */
++/* TXF_OFL */
++#define I2C_ERR_IRQSS_TXF_OFL 0x00000008
++/* TXF_UFL */
++#define I2C_ERR_IRQSS_TXF_UFL 0x00000004
++/* RXF_OFL */
++#define I2C_ERR_IRQSS_RXF_OFL 0x00000002
++/* RXF_UFL */
++#define I2C_ERR_IRQSS_RXF_UFL 0x00000001
++
++/* Fields of "I2C Raw Interrupt Status Register" */
++/* Read: Interrupt occurred. */
++#define I2C_RIS_I2C_ERR_INT_INTOCC 0x00000010
++/* Read: Interrupt occurred. */
++#define I2C_RIS_I2C_P_INT_INTOCC 0x00000020
++
++/* Fields of "I2C FIFO Configuration Register" */
++/* TX FIFO Flow Control */
++#define I2C_FIFO_CFG_TXFC 0x00020000
++/* RX FIFO Flow Control */
++#define I2C_FIFO_CFG_RXFC 0x00010000
++/* Word aligned (character alignment of four characters) */
++#define I2C_FIFO_CFG_TXFA_TXFA2 0x00002000
++/* Word aligned (character alignment of four characters) */
++#define I2C_FIFO_CFG_RXFA_RXFA2 0x00000200
++/* 1 word */
++#define I2C_FIFO_CFG_TXBS_TXBS0 0x00000000
++
++/* Fields of "I2C FIFO Configuration Register" */
++/* 1 word */
++#define I2C_FIFO_CFG_RXBS_RXBS0 0x00000000
++/* Stop on Packet End Enable */
++#define I2C_ADDR_CFG_SOPE_EN 0x00200000
++/* Stop on Not Acknowledge Enable */
++#define I2C_ADDR_CFG_SONA_EN 0x00100000
++/* Enable */
++#define I2C_ADDR_CFG_MnS_EN 0x00080000
++
++/* Fields of "I2C Interrupt Clear Register" */
++/* Clear */
++#define I2C_ICR_BREQ_INT_CLR 0x00000008
++/* Clear */
++#define I2C_ICR_LBREQ_INT_CLR 0x00000004
++
++/* Fields of "I2C Fractional Divider Configuration Register" */
++/* field offset */
++#define I2C_FDIV_CFG_DEC_OFFSET 0
++
++/* Fields of "I2C Bus Status Register" */
++/* Bus Status */
++#define I2C_BUS_STAT_BS_MASK 0x00000003
++/* Read from I2C Bus. */
++#define I2C_BUS_STAT_RNW_READ 0x00000004
++/* I2C Bus is free. */
++#define I2C_BUS_STAT_BS_FREE 0x00000000
++/*
++ * The device is working as master and has claimed the control on the
++ * I2C-bus (busy master).
++ */
++#define I2C_BUS_STAT_BS_BM 0x00000002
++
++/* Fields of "I2C RUN Control Register" */
++/* Enable */
++#define I2C_RUN_CTRL_RUN_EN 0x00000001
++
++/* Fields of "I2C End Data Control Register" */
++/*
++ * Set End of Transmission
++ * Note:Do not write '1' to this bit when bus is free. This will cause an
++ * abort after the first byte when a new transfer is started.
++ */
++#define I2C_ENDD_CTRL_SETEND 0x00000002
++
++/* Fields of "I2C Protocol Interrupt Request Source Status Register" */
++/* NACK */
++#define I2C_P_IRQSS_NACK 0x00000010
++/* AL */
++#define I2C_P_IRQSS_AL 0x00000008
++/* RX */
++#define I2C_P_IRQSS_RX 0x00000040
++/* TX_END */
++#define I2C_P_IRQSS_TX_END 0x00000020
++
++
++#endif /* I2C_LANTIQ_H */
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0023-USB-fix-roothub-for-IFXHCD.patch b/target/linux/lantiq/patches-3.8/0023-USB-fix-roothub-for-IFXHCD.patch
new file mode 100644
index 0000000..0a9dbe7
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0023-USB-fix-roothub-for-IFXHCD.patch
@@ -0,0 +1,38 @@
+From e6c3c0d86a581e0738e18e5a3369ded8527a3315 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 6 Dec 2012 19:59:53 +0100
+Subject: [PATCH 23/40] USB: fix roothub for IFXHCD
+
+---
+ arch/mips/lantiq/Kconfig | 1 +
+ drivers/usb/core/hub.c | 2 +-
+ 2 files changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
+index c002191..675310a 100644
+--- a/arch/mips/lantiq/Kconfig
++++ b/arch/mips/lantiq/Kconfig
+@@ -3,6 +3,7 @@ if LANTIQ
+ config SOC_TYPE_XWAY
+ bool
+ select PINCTRL_XWAY
++ select USB_ARCH_HAS_HCD
+ default n
+
+ choice
+diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
+index cbf7168..5cddead 100644
+--- a/drivers/usb/core/hub.c
++++ b/drivers/usb/core/hub.c
+@@ -4006,7 +4006,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
+ udev->ttport = hdev->ttport;
+ } else if (udev->speed != USB_SPEED_HIGH
+ && hdev->speed == USB_SPEED_HIGH) {
+- if (!hub->tt.hub) {
++ if (hdev->parent && !hub->tt.hub) {
+ dev_err(&udev->dev, "parent hub has no TT\n");
+ retval = -EINVAL;
+ goto fail;
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0024-SPI-MIPS-lantiq-adds-spi-xway.patch b/target/linux/lantiq/patches-3.8/0024-SPI-MIPS-lantiq-adds-spi-xway.patch
new file mode 100644
index 0000000..a1a70f8
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0024-SPI-MIPS-lantiq-adds-spi-xway.patch
@@ -0,0 +1,1032 @@
+From 60092075ded3e51036fd018ba6d9cc49e7079dcd Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 13 Mar 2013 09:29:37 +0100
+Subject: [PATCH 24/40] SPI: MIPS: lantiq: adds spi-xway
+
+This patch adds support for the SPI core found on several Lantiq SoCs.
+The Driver has been runtime tested in combination with m25p80 Flash Devices
+on Amazon_SE and VR9.
+
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/spi/Kconfig | 8 +
+ drivers/spi/Makefile | 1 +
+ drivers/spi/spi-xway.c | 977 ++++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 986 insertions(+)
+ create mode 100644 drivers/spi/spi-xway.c
+
+diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
+index 2e188e1..3522f29 100644
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -449,6 +449,14 @@ config SPI_NUC900
+ help
+ SPI driver for Nuvoton NUC900 series ARM SoCs
+
++config SPI_XWAY
++ tristate "Lantiq XWAY SPI controller"
++ depends on LANTIQ && SOC_TYPE_XWAY
++ select SPI_BITBANG
++ help
++ This driver supports the Lantiq SoC SPI controller in master
++ mode.
++
+ #
+ # Add new SPI master controllers in alphabetical order above this line
+ #
+diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
+index 64e970b..63c24da 100644
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -68,3 +68,4 @@ obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
+ obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
+ obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o
+ obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
++obj-$(CONFIG_SPI_XWAY) += spi-xway.o
+diff --git a/drivers/spi/spi-xway.c b/drivers/spi/spi-xway.c
+new file mode 100644
+index 0000000..61532e3
+--- /dev/null
++++ b/drivers/spi/spi-xway.c
+@@ -0,0 +1,977 @@
++/*
++ * Lantiq SoC SPI controller
++ *
++ * Copyright (C) 2011 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
++ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/workqueue.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/sched.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/completion.h>
++#include <linux/spinlock.h>
++#include <linux/err.h>
++#include <linux/clk.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/of_irq.h>
++
++#include <lantiq_soc.h>
++
++#define LTQ_SPI_CLC 0x00 /* Clock control */
++#define LTQ_SPI_PISEL 0x04 /* Port input select */
++#define LTQ_SPI_ID 0x08 /* Identification */
++#define LTQ_SPI_CON 0x10 /* Control */
++#define LTQ_SPI_STAT 0x14 /* Status */
++#define LTQ_SPI_WHBSTATE 0x18 /* Write HW modified state */
++#define LTQ_SPI_TB 0x20 /* Transmit buffer */
++#define LTQ_SPI_RB 0x24 /* Receive buffer */
++#define LTQ_SPI_RXFCON 0x30 /* Receive FIFO control */
++#define LTQ_SPI_TXFCON 0x34 /* Transmit FIFO control */
++#define LTQ_SPI_FSTAT 0x38 /* FIFO status */
++#define LTQ_SPI_BRT 0x40 /* Baudrate timer */
++#define LTQ_SPI_BRSTAT 0x44 /* Baudrate timer status */
++#define LTQ_SPI_SFCON 0x60 /* Serial frame control */
++#define LTQ_SPI_SFSTAT 0x64 /* Serial frame status */
++#define LTQ_SPI_GPOCON 0x70 /* General purpose output control */
++#define LTQ_SPI_GPOSTAT 0x74 /* General purpose output status */
++#define LTQ_SPI_FGPO 0x78 /* Forced general purpose output */
++#define LTQ_SPI_RXREQ 0x80 /* Receive request */
++#define LTQ_SPI_RXCNT 0x84 /* Receive count */
++#define LTQ_SPI_DMACON 0xEC /* DMA control */
++#define LTQ_SPI_IRNEN 0xF4 /* Interrupt node enable */
++#define LTQ_SPI_IRNICR 0xF8 /* Interrupt node interrupt capture */
++#define LTQ_SPI_IRNCR 0xFC /* Interrupt node control */
++
++#define LTQ_SPI_CLC_SMC_SHIFT 16 /* Clock divider for sleep mode */
++#define LTQ_SPI_CLC_SMC_MASK 0xFF
++#define LTQ_SPI_CLC_RMC_SHIFT 8 /* Clock divider for normal run mode */
++#define LTQ_SPI_CLC_RMC_MASK 0xFF
++#define LTQ_SPI_CLC_DISS BIT(1) /* Disable status bit */
++#define LTQ_SPI_CLC_DISR BIT(0) /* Disable request bit */
++
++#define LTQ_SPI_ID_TXFS_SHIFT 24 /* Implemented TX FIFO size */
++#define LTQ_SPI_ID_TXFS_MASK 0x3F
++#define LTQ_SPI_ID_RXFS_SHIFT 16 /* Implemented RX FIFO size */
++#define LTQ_SPI_ID_RXFS_MASK 0x3F
++#define LTQ_SPI_ID_REV_MASK 0x1F /* Hardware revision number */
++#define LTQ_SPI_ID_CFG BIT(5) /* DMA interface support */
++
++#define LTQ_SPI_CON_BM_SHIFT 16 /* Data width selection */
++#define LTQ_SPI_CON_BM_MASK 0x1F
++#define LTQ_SPI_CON_EM BIT(24) /* Echo mode */
++#define LTQ_SPI_CON_IDLE BIT(23) /* Idle bit value */
++#define LTQ_SPI_CON_ENBV BIT(22) /* Enable byte valid control */
++#define LTQ_SPI_CON_RUEN BIT(12) /* Receive underflow error enable */
++#define LTQ_SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */
++#define LTQ_SPI_CON_AEN BIT(10) /* Abort error enable */
++#define LTQ_SPI_CON_REN BIT(9) /* Receive overflow error enable */
++#define LTQ_SPI_CON_TEN BIT(8) /* Transmit overflow error enable */
++#define LTQ_SPI_CON_LB BIT(7) /* Loopback control */
++#define LTQ_SPI_CON_PO BIT(6) /* Clock polarity control */
++#define LTQ_SPI_CON_PH BIT(5) /* Clock phase control */
++#define LTQ_SPI_CON_HB BIT(4) /* Heading control */
++#define LTQ_SPI_CON_RXOFF BIT(1) /* Switch receiver off */
++#define LTQ_SPI_CON_TXOFF BIT(0) /* Switch transmitter off */
++
++#define LTQ_SPI_STAT_RXBV_MASK 0x7
++#define LTQ_SPI_STAT_RXBV_SHIFT 28
++#define LTQ_SPI_STAT_BSY BIT(13) /* Busy flag */
++#define LTQ_SPI_STAT_RUE BIT(12) /* Receive underflow error flag */
++#define LTQ_SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */
++#define LTQ_SPI_STAT_AE BIT(10) /* Abort error flag */
++#define LTQ_SPI_STAT_RE BIT(9) /* Receive error flag */
++#define LTQ_SPI_STAT_TE BIT(8) /* Transmit error flag */
++#define LTQ_SPI_STAT_MS BIT(1) /* Master/slave select bit */
++#define LTQ_SPI_STAT_EN BIT(0) /* Enable bit */
++
++#define LTQ_SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */
++#define LTQ_SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */
++#define LTQ_SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */
++#define LTQ_SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */
++#define LTQ_SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error
++ flag */
++#define LTQ_SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */
++#define LTQ_SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */
++#define LTQ_SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */
++#define LTQ_SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */
++#define LTQ_SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */
++#define LTQ_SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */
++#define LTQ_SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */
++#define LTQ_SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */
++#define LTQ_SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */
++#define LTQ_SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */
++#define LTQ_SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */
++#define LTQ_SPI_WHBSTATE_CLR_ERRORS 0x0F50
++
++#define LTQ_SPI_RXFCON_RXFITL_SHIFT 8 /* FIFO interrupt trigger level */
++#define LTQ_SPI_RXFCON_RXFITL_MASK 0x3F
++#define LTQ_SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */
++#define LTQ_SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */
++
++#define LTQ_SPI_TXFCON_TXFITL_SHIFT 8 /* FIFO interrupt trigger level */
++#define LTQ_SPI_TXFCON_TXFITL_MASK 0x3F
++#define LTQ_SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */
++#define LTQ_SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */
++
++#define LTQ_SPI_FSTAT_RXFFL_MASK 0x3f
++#define LTQ_SPI_FSTAT_RXFFL_SHIFT 0
++#define LTQ_SPI_FSTAT_TXFFL_MASK 0x3f
++#define LTQ_SPI_FSTAT_TXFFL_SHIFT 8
++
++#define LTQ_SPI_GPOCON_ISCSBN_SHIFT 8
++#define LTQ_SPI_GPOCON_INVOUTN_SHIFT 0
++
++#define LTQ_SPI_FGPO_SETOUTN_SHIFT 8
++#define LTQ_SPI_FGPO_CLROUTN_SHIFT 0
++
++#define LTQ_SPI_RXREQ_RXCNT_MASK 0xFFFF /* Receive count value */
++#define LTQ_SPI_RXCNT_TODO_MASK 0xFFFF /* Recevie to-do value */
++
++#define LTQ_SPI_IRNEN_F BIT(3) /* Frame end interrupt request */
++#define LTQ_SPI_IRNEN_E BIT(2) /* Error end interrupt request */
++#define LTQ_SPI_IRNEN_T BIT(1) /* Transmit end interrupt request */
++#define LTQ_SPI_IRNEN_R BIT(0) /* Receive end interrupt request */
++#define LTQ_SPI_IRNEN_ALL 0xF
++
++struct ltq_spi {
++ struct spi_bitbang bitbang;
++ struct completion done;
++ spinlock_t lock;
++
++ struct device *dev;
++ void __iomem *base;
++ struct clk *fpiclk;
++ struct clk *spiclk;
++
++ int status;
++ int irq[3];
++
++ const u8 *tx;
++ u8 *rx;
++ u32 tx_cnt;
++ u32 rx_cnt;
++ u32 len;
++ struct spi_transfer *curr_transfer;
++
++ u32 (*get_tx) (struct ltq_spi *);
++
++ u16 txfs;
++ u16 rxfs;
++ unsigned dma_support:1;
++ unsigned cfg_mode:1;
++};
++
++static inline struct ltq_spi *ltq_spi_to_hw(struct spi_device *spi)
++{
++ return spi_master_get_devdata(spi->master);
++}
++
++static inline u32 ltq_spi_reg_read(struct ltq_spi *hw, u32 reg)
++{
++ return ioread32be(hw->base + reg);
++}
++
++static inline void ltq_spi_reg_write(struct ltq_spi *hw, u32 val, u32 reg)
++{
++ iowrite32be(val, hw->base + reg);
++}
++
++static inline void ltq_spi_reg_setbit(struct ltq_spi *hw, u32 bits, u32 reg)
++{
++ u32 val;
++
++ val = ltq_spi_reg_read(hw, reg);
++ val |= bits;
++ ltq_spi_reg_write(hw, val, reg);
++}
++
++static inline void ltq_spi_reg_clearbit(struct ltq_spi *hw, u32 bits, u32 reg)
++{
++ u32 val;
++
++ val = ltq_spi_reg_read(hw, reg);
++ val &= ~bits;
++ ltq_spi_reg_write(hw, val, reg);
++}
++
++static void ltq_spi_hw_enable(struct ltq_spi *hw)
++{
++ u32 clc;
++
++ /* Power-up module */
++ clk_enable(hw->spiclk);
++
++ /*
++ * Set clock divider for run mode to 1 to
++ * run at same frequency as FPI bus
++ */
++ clc = (1 << LTQ_SPI_CLC_RMC_SHIFT);
++ ltq_spi_reg_write(hw, clc, LTQ_SPI_CLC);
++}
++
++static void ltq_spi_hw_disable(struct ltq_spi *hw)
++{
++ /* Set clock divider to 0 and set module disable bit */
++ ltq_spi_reg_write(hw, LTQ_SPI_CLC_DISS, LTQ_SPI_CLC);
++
++ /* Power-down module */
++ clk_disable(hw->spiclk);
++}
++
++static void ltq_spi_reset_fifos(struct ltq_spi *hw)
++{
++ u32 val;
++
++ /*
++ * Enable and flush FIFOs. Set interrupt trigger level to
++ * half of FIFO count implemented in hardware.
++ */
++ if (hw->txfs > 1) {
++ val = hw->txfs << (LTQ_SPI_TXFCON_TXFITL_SHIFT - 1);
++ val |= LTQ_SPI_TXFCON_TXFEN | LTQ_SPI_TXFCON_TXFLU;
++ ltq_spi_reg_write(hw, val, LTQ_SPI_TXFCON);
++ }
++
++ if (hw->rxfs > 1) {
++ val = hw->rxfs << (LTQ_SPI_RXFCON_RXFITL_SHIFT - 1);
++ val |= LTQ_SPI_RXFCON_RXFEN | LTQ_SPI_RXFCON_RXFLU;
++ ltq_spi_reg_write(hw, val, LTQ_SPI_RXFCON);
++ }
++}
++
++static inline int ltq_spi_wait_ready(struct ltq_spi *hw)
++{
++ u32 stat;
++ unsigned long timeout;
++
++ timeout = jiffies + msecs_to_jiffies(200);
++
++ do {
++ stat = ltq_spi_reg_read(hw, LTQ_SPI_STAT);
++ if (!(stat & LTQ_SPI_STAT_BSY))
++ return 0;
++
++ cond_resched();
++ } while (!time_after_eq(jiffies, timeout));
++
++ dev_err(hw->dev, "SPI wait ready timed out stat: %x\n", stat);
++
++ return -ETIMEDOUT;
++}
++
++static void ltq_spi_config_mode_set(struct ltq_spi *hw)
++{
++ if (hw->cfg_mode)
++ return;
++
++ /*
++ * Putting the SPI module in config mode is only safe if no
++ * transfer is in progress as indicated by busy flag STATE.BSY.
++ */
++ if (ltq_spi_wait_ready(hw)) {
++ ltq_spi_reset_fifos(hw);
++ hw->status = -ETIMEDOUT;
++ }
++ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLREN, LTQ_SPI_WHBSTATE);
++
++ hw->cfg_mode = 1;
++}
++
++static void ltq_spi_run_mode_set(struct ltq_spi *hw)
++{
++ if (!hw->cfg_mode)
++ return;
++
++ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETEN, LTQ_SPI_WHBSTATE);
++
++ hw->cfg_mode = 0;
++}
++
++static u32 ltq_spi_tx_word_u8(struct ltq_spi *hw)
++{
++ const u8 *tx = hw->tx;
++ u32 data = *tx++;
++
++ hw->tx_cnt++;
++ hw->tx++;
++
++ return data;
++}
++
++static u32 ltq_spi_tx_word_u16(struct ltq_spi *hw)
++{
++ const u16 *tx = (u16 *) hw->tx;
++ u32 data = *tx++;
++
++ hw->tx_cnt += 2;
++ hw->tx += 2;
++
++ return data;
++}
++
++static u32 ltq_spi_tx_word_u32(struct ltq_spi *hw)
++{
++ const u32 *tx = (u32 *) hw->tx;
++ u32 data = *tx++;
++
++ hw->tx_cnt += 4;
++ hw->tx += 4;
++
++ return data;
++}
++
++static void ltq_spi_bits_per_word_set(struct spi_device *spi)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++ u32 bm;
++ u8 bits_per_word = spi->bits_per_word;
++
++ /*
++ * Use either default value of SPI device or value
++ * from current transfer.
++ */
++ if (hw->curr_transfer && hw->curr_transfer->bits_per_word)
++ bits_per_word = hw->curr_transfer->bits_per_word;
++
++ if (bits_per_word <= 8)
++ hw->get_tx = ltq_spi_tx_word_u8;
++ else if (bits_per_word <= 16)
++ hw->get_tx = ltq_spi_tx_word_u16;
++ else if (bits_per_word <= 32)
++ hw->get_tx = ltq_spi_tx_word_u32;
++
++ /* CON.BM value = bits_per_word - 1 */
++ bm = (bits_per_word - 1) << LTQ_SPI_CON_BM_SHIFT;
++
++ ltq_spi_reg_clearbit(hw, LTQ_SPI_CON_BM_MASK <<
++ LTQ_SPI_CON_BM_SHIFT, LTQ_SPI_CON);
++ ltq_spi_reg_setbit(hw, bm, LTQ_SPI_CON);
++}
++
++static void ltq_spi_speed_set(struct spi_device *spi)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++ u32 br, max_speed_hz, spi_clk;
++ u32 speed_hz = spi->max_speed_hz;
++
++ /*
++ * Use either default value of SPI device or value
++ * from current transfer.
++ */
++ if (hw->curr_transfer && hw->curr_transfer->speed_hz)
++ speed_hz = hw->curr_transfer->speed_hz;
++
++ /*
++ * SPI module clock is derived from FPI bus clock dependent on
++ * divider value in CLC.RMS which is always set to 1.
++ */
++ spi_clk = clk_get_rate(hw->fpiclk);
++
++ /*
++ * Maximum SPI clock frequency in master mode is half of
++ * SPI module clock frequency. Maximum reload value of
++ * baudrate generator BR is 2^16.
++ */
++ max_speed_hz = spi_clk / 2;
++ if (speed_hz >= max_speed_hz)
++ br = 0;
++ else
++ br = (max_speed_hz / speed_hz) - 1;
++
++ if (br > 0xFFFF)
++ br = 0xFFFF;
++
++ ltq_spi_reg_write(hw, br, LTQ_SPI_BRT);
++}
++
++static void ltq_spi_clockmode_set(struct spi_device *spi)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++ u32 con;
++
++ con = ltq_spi_reg_read(hw, LTQ_SPI_CON);
++
++ /*
++ * SPI mode mapping in CON register:
++ * Mode CPOL CPHA CON.PO CON.PH
++ * 0 0 0 0 1
++ * 1 0 1 0 0
++ * 2 1 0 1 1
++ * 3 1 1 1 0
++ */
++ if (spi->mode & SPI_CPHA)
++ con &= ~LTQ_SPI_CON_PH;
++ else
++ con |= LTQ_SPI_CON_PH;
++
++ if (spi->mode & SPI_CPOL)
++ con |= LTQ_SPI_CON_PO;
++ else
++ con &= ~LTQ_SPI_CON_PO;
++
++ /* Set heading control */
++ if (spi->mode & SPI_LSB_FIRST)
++ con &= ~LTQ_SPI_CON_HB;
++ else
++ con |= LTQ_SPI_CON_HB;
++
++ ltq_spi_reg_write(hw, con, LTQ_SPI_CON);
++}
++
++static void ltq_spi_xmit_set(struct ltq_spi *hw, struct spi_transfer *t)
++{
++ u32 con;
++
++ con = ltq_spi_reg_read(hw, LTQ_SPI_CON);
++
++ if (t) {
++ if (t->tx_buf && t->rx_buf) {
++ con &= ~(LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF);
++ } else if (t->rx_buf) {
++ con &= ~LTQ_SPI_CON_RXOFF;
++ con |= LTQ_SPI_CON_TXOFF;
++ } else if (t->tx_buf) {
++ con &= ~LTQ_SPI_CON_TXOFF;
++ con |= LTQ_SPI_CON_RXOFF;
++ }
++ } else
++ con |= (LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF);
++
++ ltq_spi_reg_write(hw, con, LTQ_SPI_CON);
++}
++
++static void ltq_spi_internal_cs_activate(struct spi_device *spi)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++ u32 fgpo;
++
++ fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_CLROUTN_SHIFT));
++ ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
++}
++
++static void ltq_spi_internal_cs_deactivate(struct spi_device *spi)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++ u32 fgpo;
++
++ fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT));
++ ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
++}
++
++static void ltq_spi_chipselect(struct spi_device *spi, int cs)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++
++ switch (cs) {
++ case BITBANG_CS_ACTIVE:
++ ltq_spi_bits_per_word_set(spi);
++ ltq_spi_speed_set(spi);
++ ltq_spi_clockmode_set(spi);
++ ltq_spi_run_mode_set(hw);
++ ltq_spi_internal_cs_activate(spi);
++ break;
++
++ case BITBANG_CS_INACTIVE:
++ ltq_spi_internal_cs_deactivate(spi);
++ ltq_spi_config_mode_set(hw);
++ break;
++ }
++}
++
++static int ltq_spi_setup_transfer(struct spi_device *spi,
++ struct spi_transfer *t)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++ u8 bits_per_word = spi->bits_per_word;
++
++ hw->curr_transfer = t;
++
++ if (t && t->bits_per_word)
++ bits_per_word = t->bits_per_word;
++
++ if (bits_per_word > 32)
++ return -EINVAL;
++
++ ltq_spi_config_mode_set(hw);
++
++ return 0;
++}
++
++static int ltq_spi_setup(struct spi_device *spi)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++ u32 gpocon, fgpo;
++
++ /* Set default word length to 8 if not set */
++ if (!spi->bits_per_word)
++ spi->bits_per_word = 8;
++
++ if (spi->bits_per_word > 32)
++ return -EINVAL;
++
++ /*
++ * Up to six GPIOs can be connected to the SPI module
++ * via GPIO alternate function to control the chip select lines.
++ */
++ gpocon = (1 << (spi->chip_select +
++ LTQ_SPI_GPOCON_ISCSBN_SHIFT));
++
++ if (spi->mode & SPI_CS_HIGH)
++ gpocon |= (1 << spi->chip_select);
++
++ fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT));
++
++ ltq_spi_reg_setbit(hw, gpocon, LTQ_SPI_GPOCON);
++ ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
++
++ return 0;
++}
++
++static void ltq_spi_cleanup(struct spi_device *spi)
++{
++
++}
++
++static void ltq_spi_txfifo_write(struct ltq_spi *hw)
++{
++ u32 fstat, data;
++ u16 fifo_space;
++
++ /* Determine how much FIFOs are free for TX data */
++ fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT);
++ fifo_space = hw->txfs - ((fstat >> LTQ_SPI_FSTAT_TXFFL_SHIFT) &
++ LTQ_SPI_FSTAT_TXFFL_MASK);
++
++ if (!fifo_space)
++ return;
++
++ while (hw->tx_cnt < hw->len && fifo_space) {
++ data = hw->get_tx(hw);
++ ltq_spi_reg_write(hw, data, LTQ_SPI_TB);
++ fifo_space--;
++ }
++}
++
++static void ltq_spi_rxfifo_read(struct ltq_spi *hw)
++{
++ u32 fstat, data, *rx32;
++ u16 fifo_fill;
++ u8 rxbv, shift, *rx8;
++
++ /* Determine how much FIFOs are filled with RX data */
++ fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT);
++ fifo_fill = ((fstat >> LTQ_SPI_FSTAT_RXFFL_SHIFT)
++ & LTQ_SPI_FSTAT_RXFFL_MASK);
++
++ if (!fifo_fill)
++ return;
++
++ /*
++ * The 32 bit FIFO is always used completely independent from the
++ * bits_per_word value. Thus four bytes have to be read at once
++ * per FIFO.
++ */
++ rx32 = (u32 *) hw->rx;
++ while (hw->len - hw->rx_cnt >= 4 && fifo_fill) {
++ *rx32++ = ltq_spi_reg_read(hw, LTQ_SPI_RB);
++ hw->rx_cnt += 4;
++ hw->rx += 4;
++ fifo_fill--;
++ }
++
++ /*
++ * If there are remaining bytes, read byte count from STAT.RXBV
++ * register and read the data byte-wise.
++ */
++ while (fifo_fill && hw->rx_cnt < hw->len) {
++ rxbv = (ltq_spi_reg_read(hw, LTQ_SPI_STAT) >>
++ LTQ_SPI_STAT_RXBV_SHIFT) & LTQ_SPI_STAT_RXBV_MASK;
++ data = ltq_spi_reg_read(hw, LTQ_SPI_RB);
++
++ shift = (rxbv - 1) * 8;
++ rx8 = hw->rx;
++
++ while (rxbv) {
++ *rx8++ = (data >> shift) & 0xFF;
++ rxbv--;
++ shift -= 8;
++ hw->rx_cnt++;
++ hw->rx++;
++ }
++
++ fifo_fill--;
++ }
++}
++
++static void ltq_spi_rxreq_set(struct ltq_spi *hw)
++{
++ u32 rxreq, rxreq_max, rxtodo;
++
++ rxtodo = ltq_spi_reg_read(hw, LTQ_SPI_RXCNT) & LTQ_SPI_RXCNT_TODO_MASK;
++
++ /*
++ * In RX-only mode the serial clock is activated only after writing
++ * the expected amount of RX bytes into RXREQ register.
++ * To avoid receive overflows at high clocks it is better to request
++ * only the amount of bytes that fits into all FIFOs. This value
++ * depends on the FIFO size implemented in hardware.
++ */
++ rxreq = hw->len - hw->rx_cnt;
++ rxreq_max = hw->rxfs << 2;
++ rxreq = min(rxreq_max, rxreq);
++
++ if (!rxtodo && rxreq)
++ ltq_spi_reg_write(hw, rxreq, LTQ_SPI_RXREQ);
++}
++
++static inline void ltq_spi_complete(struct ltq_spi *hw)
++{
++ complete(&hw->done);
++}
++
++irqreturn_t ltq_spi_tx_irq(int irq, void *data)
++{
++ struct ltq_spi *hw = data;
++ unsigned long flags;
++ int completed = 0;
++
++ spin_lock_irqsave(&hw->lock, flags);
++
++ if (hw->tx_cnt < hw->len)
++ ltq_spi_txfifo_write(hw);
++
++ if (hw->tx_cnt == hw->len)
++ completed = 1;
++
++ spin_unlock_irqrestore(&hw->lock, flags);
++
++ if (completed)
++ ltq_spi_complete(hw);
++
++ return IRQ_HANDLED;
++}
++
++irqreturn_t ltq_spi_rx_irq(int irq, void *data)
++{
++ struct ltq_spi *hw = data;
++ unsigned long flags;
++ int completed = 0;
++
++ spin_lock_irqsave(&hw->lock, flags);
++
++ if (hw->rx_cnt < hw->len) {
++ ltq_spi_rxfifo_read(hw);
++
++ if (hw->tx && hw->tx_cnt < hw->len)
++ ltq_spi_txfifo_write(hw);
++ }
++
++ if (hw->rx_cnt == hw->len)
++ completed = 1;
++ else if (!hw->tx)
++ ltq_spi_rxreq_set(hw);
++
++ spin_unlock_irqrestore(&hw->lock, flags);
++
++ if (completed)
++ ltq_spi_complete(hw);
++
++ return IRQ_HANDLED;
++}
++
++irqreturn_t ltq_spi_err_irq(int irq, void *data)
++{
++ struct ltq_spi *hw = data;
++ unsigned long flags;
++
++ spin_lock_irqsave(&hw->lock, flags);
++
++ /* Disable all interrupts */
++ ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN);
++
++ /* Clear all error flags */
++ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
++
++ /* Flush FIFOs */
++ ltq_spi_reg_setbit(hw, LTQ_SPI_RXFCON_RXFLU, LTQ_SPI_RXFCON);
++ ltq_spi_reg_setbit(hw, LTQ_SPI_TXFCON_TXFLU, LTQ_SPI_TXFCON);
++
++ hw->status = -EIO;
++ spin_unlock_irqrestore(&hw->lock, flags);
++
++ ltq_spi_complete(hw);
++
++ return IRQ_HANDLED;
++}
++
++static int ltq_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++ u32 irq_flags = 0;
++
++ hw->tx = t->tx_buf;
++ hw->rx = t->rx_buf;
++ hw->len = t->len;
++ hw->tx_cnt = 0;
++ hw->rx_cnt = 0;
++ hw->status = 0;
++ INIT_COMPLETION(hw->done);
++
++ ltq_spi_xmit_set(hw, t);
++
++ /* Enable error interrupts */
++ ltq_spi_reg_setbit(hw, LTQ_SPI_IRNEN_E, LTQ_SPI_IRNEN);
++
++ if (hw->tx) {
++ /* Initially fill TX FIFO with as much data as possible */
++ ltq_spi_txfifo_write(hw);
++ irq_flags |= LTQ_SPI_IRNEN_T;
++
++ /* Always enable RX interrupt in Full Duplex mode */
++ if (hw->rx)
++ irq_flags |= LTQ_SPI_IRNEN_R;
++ } else if (hw->rx) {
++ /* Start RX clock */
++ ltq_spi_rxreq_set(hw);
++
++ /* Enable RX interrupt to receive data from RX FIFOs */
++ irq_flags |= LTQ_SPI_IRNEN_R;
++ }
++
++ /* Enable TX or RX interrupts */
++ ltq_spi_reg_setbit(hw, irq_flags, LTQ_SPI_IRNEN);
++ wait_for_completion_interruptible(&hw->done);
++
++ /* Disable all interrupts */
++ ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN);
++
++ /*
++ * Return length of current transfer for bitbang utility code if
++ * no errors occured during transmission.
++ */
++ if (!hw->status)
++ hw->status = hw->len;
++
++ return hw->status;
++}
++
++static const struct ltq_spi_irq_map {
++ char *name;
++ irq_handler_t handler;
++} ltq_spi_irqs[] = {
++ { "spi_rx", ltq_spi_rx_irq },
++ { "spi_tx", ltq_spi_tx_irq },
++ { "spi_err", ltq_spi_err_irq },
++};
++
++static int ltq_spi_probe(struct platform_device *pdev)
++{
++ struct resource irqres[3];
++ struct spi_master *master;
++ struct resource *r;
++ struct ltq_spi *hw;
++ int ret, i;
++ u32 data, id;
++
++ if (of_irq_to_resource_table(pdev->dev.of_node, irqres, 3) != 3) {
++ dev_err(&pdev->dev, "IRQ settings missing in device tree\n");
++ return -EINVAL;
++ }
++
++ master = spi_alloc_master(&pdev->dev, sizeof(struct ltq_spi));
++ if (!master) {
++ dev_err(&pdev->dev, "spi_alloc_master\n");
++ ret = -ENOMEM;
++ goto err;
++ }
++
++ hw = spi_master_get_devdata(master);
++
++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (r == NULL) {
++ dev_err(&pdev->dev, "platform_get_resource\n");
++ ret = -ENOENT;
++ goto err_master;
++ }
++
++ r = devm_request_mem_region(&pdev->dev, r->start, resource_size(r),
++ pdev->name);
++ if (!r) {
++ dev_err(&pdev->dev, "failed to request memory region\n");
++ ret = -ENXIO;
++ goto err_master;
++ }
++
++ hw->base = devm_ioremap_nocache(&pdev->dev, r->start, resource_size(r));
++ if (!hw->base) {
++ dev_err(&pdev->dev, "failed to remap memory region\n");
++ ret = -ENXIO;
++ goto err_master;
++ }
++
++ memset(hw->irq, 0, sizeof(hw->irq));
++ for (i = 0; i < ARRAY_SIZE(ltq_spi_irqs); i++) {
++ hw->irq[i] = irqres[i].start;
++ ret = request_irq(hw->irq[i], ltq_spi_irqs[i].handler,
++ 0, ltq_spi_irqs[i].name, hw);
++ if (ret) {
++ dev_err(&pdev->dev, "failed to request %s irq (%d)\n",
++ ltq_spi_irqs[i].name, hw->irq[i]);
++ goto err_irq;
++ }
++ }
++
++ hw->fpiclk = clk_get_fpi();
++ if (IS_ERR(hw->fpiclk)) {
++ dev_err(&pdev->dev, "failed to get fpi clock\n");
++ ret = PTR_ERR(hw->fpiclk);
++ goto err_clk;
++ }
++
++ hw->spiclk = clk_get(&pdev->dev, NULL);
++ if (IS_ERR(hw->spiclk)) {
++ dev_err(&pdev->dev, "failed to get spi clock gate\n");
++ ret = PTR_ERR(hw->spiclk);
++ goto err_clk;
++ }
++
++ hw->bitbang.master = spi_master_get(master);
++ hw->bitbang.chipselect = ltq_spi_chipselect;
++ hw->bitbang.setup_transfer = ltq_spi_setup_transfer;
++ hw->bitbang.txrx_bufs = ltq_spi_txrx_bufs;
++
++ if (of_machine_is_compatible("lantiq,ase"))
++ master->num_chipselect = 3;
++ else
++ master->num_chipselect = 6;
++ master->bus_num = pdev->id;
++ master->setup = ltq_spi_setup;
++ master->cleanup = ltq_spi_cleanup;
++ master->dev.of_node = pdev->dev.of_node;
++
++ hw->dev = &pdev->dev;
++ init_completion(&hw->done);
++ spin_lock_init(&hw->lock);
++
++ ltq_spi_hw_enable(hw);
++
++ /* Read module capabilities */
++ id = ltq_spi_reg_read(hw, LTQ_SPI_ID);
++ hw->txfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK;
++ hw->rxfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK;
++ hw->dma_support = (id & LTQ_SPI_ID_CFG) ? 1 : 0;
++
++ ltq_spi_config_mode_set(hw);
++
++ /* Enable error checking, disable TX/RX, set idle value high */
++ data = LTQ_SPI_CON_RUEN | LTQ_SPI_CON_AEN |
++ LTQ_SPI_CON_TEN | LTQ_SPI_CON_REN |
++ LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF | LTQ_SPI_CON_IDLE;
++ ltq_spi_reg_write(hw, data, LTQ_SPI_CON);
++
++ /* Enable master mode and clear error flags */
++ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETMS |
++ LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
++
++ /* Reset GPIO/CS registers */
++ ltq_spi_reg_write(hw, 0x0, LTQ_SPI_GPOCON);
++ ltq_spi_reg_write(hw, 0xFF00, LTQ_SPI_FGPO);
++
++ /* Enable and flush FIFOs */
++ ltq_spi_reset_fifos(hw);
++
++ ret = spi_bitbang_start(&hw->bitbang);
++ if (ret) {
++ dev_err(&pdev->dev, "spi_bitbang_start failed\n");
++ goto err_bitbang;
++ }
++
++ platform_set_drvdata(pdev, hw);
++
++ pr_info("Lantiq SoC SPI controller rev %u (TXFS %u, RXFS %u, DMA %u)\n",
++ id & LTQ_SPI_ID_REV_MASK, hw->txfs, hw->rxfs, hw->dma_support);
++
++ return 0;
++
++err_bitbang:
++ ltq_spi_hw_disable(hw);
++
++err_clk:
++ if (hw->fpiclk)
++ clk_put(hw->fpiclk);
++ if (hw->spiclk)
++ clk_put(hw->spiclk);
++
++err_irq:
++ clk_put(hw->fpiclk);
++
++ for (; i > 0; i--)
++ free_irq(hw->irq[i], hw);
++
++err_master:
++ spi_master_put(master);
++
++err:
++ return ret;
++}
++
++static int ltq_spi_remove(struct platform_device *pdev)
++{
++ struct ltq_spi *hw = platform_get_drvdata(pdev);
++ int ret, i;
++
++ ret = spi_bitbang_stop(&hw->bitbang);
++ if (ret)
++ return ret;
++
++ platform_set_drvdata(pdev, NULL);
++
++ ltq_spi_config_mode_set(hw);
++ ltq_spi_hw_disable(hw);
++
++ for (i = 0; i < ARRAY_SIZE(hw->irq); i++)
++ if (0 < hw->irq[i])
++ free_irq(hw->irq[i], hw);
++
++ if (hw->fpiclk)
++ clk_put(hw->fpiclk);
++ if (hw->spiclk)
++ clk_put(hw->spiclk);
++
++ spi_master_put(hw->bitbang.master);
++
++ return 0;
++}
++
++static const struct of_device_id ltq_spi_match[] = {
++ { .compatible = "lantiq,spi-xway" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, ltq_spi_match);
++
++static struct platform_driver ltq_spi_driver = {
++ .probe = ltq_spi_probe,
++ .remove = ltq_spi_remove,
++ .driver = {
++ .name = "spi-xway",
++ .owner = THIS_MODULE,
++ .of_match_table = ltq_spi_match,
++ },
++};
++
++module_platform_driver(ltq_spi_driver);
++
++MODULE_DESCRIPTION("Lantiq SoC SPI controller driver");
++MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:spi-xway");
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0025-NET-MIPS-lantiq-adds-xrx200-net.patch b/target/linux/lantiq/patches-3.8/0025-NET-MIPS-lantiq-adds-xrx200-net.patch
new file mode 100644
index 0000000..bc2b70d
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0025-NET-MIPS-lantiq-adds-xrx200-net.patch
@@ -0,0 +1,1426 @@
+From fbfdf78ba827a8f854ae3ed7b11ea6df4054ffb1 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 22 Oct 2012 12:22:23 +0200
+Subject: [PATCH 25/40] NET: MIPS: lantiq: adds xrx200-net
+
+---
+ drivers/net/ethernet/Kconfig | 8 +-
+ drivers/net/ethernet/Makefile | 1 +
+ drivers/net/ethernet/lantiq_pce.h | 163 +++++
+ drivers/net/ethernet/lantiq_xrx200.c | 1203 ++++++++++++++++++++++++++++++++++
+ 4 files changed, 1374 insertions(+), 1 deletion(-)
+ create mode 100644 drivers/net/ethernet/lantiq_pce.h
+ create mode 100644 drivers/net/ethernet/lantiq_xrx200.c
+
+diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
+index e4ff389..35cb7b0 100644
+--- a/drivers/net/ethernet/Kconfig
++++ b/drivers/net/ethernet/Kconfig
+@@ -83,7 +83,13 @@ config LANTIQ_ETOP
+ tristate "Lantiq SoC ETOP driver"
+ depends on SOC_TYPE_XWAY
+ ---help---
+- Support for the MII0 inside the Lantiq SoC
++ Support for the MII0 inside the Lantiq ADSL SoC
++
++config LANTIQ_XRX200
++ tristate "Lantiq SoC XRX200 driver"
++ depends on SOC_TYPE_XWAY
++ ---help---
++ Support for the MII0 inside the Lantiq VDSL SoC
+
+ source "drivers/net/ethernet/marvell/Kconfig"
+ source "drivers/net/ethernet/mellanox/Kconfig"
+diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
+index d447307..4f95100 100644
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -36,6 +36,7 @@ obj-$(CONFIG_IP1000) += icplus/
+ obj-$(CONFIG_JME) += jme.o
+ obj-$(CONFIG_KORINA) += korina.o
+ obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
++obj-$(CONFIG_LANTIQ_XRX200) += lantiq_xrx200.o
+ obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
+ obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
+ obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
+diff --git a/drivers/net/ethernet/lantiq_pce.h b/drivers/net/ethernet/lantiq_pce.h
+new file mode 100644
+index 0000000..0c38efe
+--- /dev/null
++++ b/drivers/net/ethernet/lantiq_pce.h
+@@ -0,0 +1,163 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Copyright (C) 2010 Lantiq Deutschland GmbH
++ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
++ *
++ * PCE microcode extracted from UGW5.2 switch api
++ */
++
++/* Switch API Micro Code V0.3 */
++enum {
++ OUT_MAC0 = 0,
++ OUT_MAC1,
++ OUT_MAC2,
++ OUT_MAC3,
++ OUT_MAC4,
++ OUT_MAC5,
++ OUT_ETHTYP,
++ OUT_VTAG0,
++ OUT_VTAG1,
++ OUT_ITAG0,
++ OUT_ITAG1, /*10 */
++ OUT_ITAG2,
++ OUT_ITAG3,
++ OUT_IP0,
++ OUT_IP1,
++ OUT_IP2,
++ OUT_IP3,
++ OUT_SIP0,
++ OUT_SIP1,
++ OUT_SIP2,
++ OUT_SIP3, /*20*/
++ OUT_SIP4,
++ OUT_SIP5,
++ OUT_SIP6,
++ OUT_SIP7,
++ OUT_DIP0,
++ OUT_DIP1,
++ OUT_DIP2,
++ OUT_DIP3,
++ OUT_DIP4,
++ OUT_DIP5, /*30*/
++ OUT_DIP6,
++ OUT_DIP7,
++ OUT_SESID,
++ OUT_PROT,
++ OUT_APP0,
++ OUT_APP1,
++ OUT_IGMP0,
++ OUT_IGMP1,
++ OUT_IPOFF, /*39*/
++ OUT_NONE = 63
++};
++
++/* parser's microcode length type */
++#define INSTR 0
++#define IPV6 1
++#define LENACCU 2
++
++/* parser's microcode flag type */
++enum {
++ FLAG_ITAG = 0,
++ FLAG_VLAN,
++ FLAG_SNAP,
++ FLAG_PPPOE,
++ FLAG_IPV6,
++ FLAG_IPV6FL,
++ FLAG_IPV4,
++ FLAG_IGMP,
++ FLAG_TU,
++ FLAG_HOP,
++ FLAG_NN1, /*10 */
++ FLAG_NN2,
++ FLAG_END,
++ FLAG_NO, /*13*/
++};
++
++/* Micro code version V2_11 (extension for parsing IPv6 in PPPoE) */
++#define MC_ENTRY(val, msk, ns, out, len, type, flags, ipv4_len) \
++ { {val, msk, (ns<<10 | out<<4 | len>>1), (len&1)<<15 | type<<13 | flags<<9 | ipv4_len<<8 }}
++struct pce_microcode {
++ unsigned short val[4];
++/* unsigned short val_2;
++ unsigned short val_1;
++ unsigned short val_0;*/
++} pce_microcode[] = {
++ /* value mask ns fields L type flags ipv4_len */
++ MC_ENTRY(0x88c3, 0xFFFF, 1, OUT_ITAG0, 4, INSTR, FLAG_ITAG, 0),
++ MC_ENTRY(0x8100, 0xFFFF, 2, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
++ MC_ENTRY(0x88A8, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
++ MC_ENTRY(0x8100, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
++ MC_ENTRY(0x8864, 0xFFFF, 17, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0800, 0xFFFF, 21, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x86DD, 0xFFFF, 22, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x8863, 0xFFFF, 16, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0xF800, 10, OUT_NONE, 0, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0x0000, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0600, 0x0600, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0x0000, 12, OUT_NONE, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0xAAAA, 0xFFFF, 14, OUT_NONE, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0300, 0xFF00, 39, OUT_NONE, 0, INSTR, FLAG_SNAP, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_DIP7, 3, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0x0000, 18, OUT_DIP7, 3, INSTR, FLAG_PPPOE, 0),
++ MC_ENTRY(0x0021, 0xFFFF, 21, OUT_NONE, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0057, 0xFFFF, 22, OUT_NONE, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x4000, 0xF000, 24, OUT_IP0, 4, INSTR, FLAG_IPV4, 1),
++ MC_ENTRY(0x6000, 0xF000, 27, OUT_IP0, 3, INSTR, FLAG_IPV6, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0x0000, 25, OUT_IP3, 2, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0x0000, 26, OUT_SIP0, 4, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0x0000, 38, OUT_NONE, 0, LENACCU, FLAG_NO, 0),
++ MC_ENTRY(0x1100, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0600, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_HOP, 0),
++ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN1, 0),
++ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN2, 0),
++ MC_ENTRY(0x0000, 0x0000, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_HOP, 0),
++ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN1, 0),
++ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN2, 0),
++ MC_ENTRY(0x0000, 0x0000, 38, OUT_PROT, 1, IPV6, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0x0000, 38, OUT_SIP0, 16, INSTR, FLAG_NO, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_APP0, 4, INSTR, FLAG_IGMP, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
++};
+diff --git a/drivers/net/ethernet/lantiq_xrx200.c b/drivers/net/ethernet/lantiq_xrx200.c
+new file mode 100644
+index 0000000..f815165
+--- /dev/null
++++ b/drivers/net/ethernet/lantiq_xrx200.c
+@@ -0,0 +1,1203 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Copyright (C) 2010 Lantiq Deutschland
++ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/etherdevice.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/interrupt.h>
++#include <linux/clk.h>
++#include <asm/delay.h>
++
++#include <linux/of_net.h>
++#include <linux/of_mdio.h>
++#include <linux/of_gpio.h>
++
++#include <xway_dma.h>
++#include <lantiq_soc.h>
++
++#include "lantiq_pce.h"
++
++#define SW_POLLING
++#define SW_ROUTING
++#define SW_PORTMAP
++
++#ifdef SW_ROUTING
++ #ifdef SW_PORTMAP
++#define XRX200_MAX_DEV 7
++ #else
++#define XRX200_MAX_DEV 2
++ #endif
++#else
++#define XRX200_MAX_DEV 1
++#endif
++
++#define XRX200_MAX_PORT 7
++#define XRX200_MAX_DMA 8
++
++#define XRX200_HEADROOM 4
++
++#define XRX200_TX_TIMEOUT (10 * HZ)
++
++/* port type */
++#define XRX200_PORT_TYPE_PHY 1
++#define XRX200_PORT_TYPE_MAC 2
++
++/* DMA */
++#define XRX200_DMA_CRC_LEN 0x4
++#define XRX200_DMA_DATA_LEN 0x600
++#define XRX200_DMA_IRQ INT_NUM_IM2_IRL0
++#define XRX200_DMA_RX 0
++#define XRX200_DMA_TX 1
++
++/* fetch / store dma */
++#define FDMA_PCTRL0 0x2A00
++#define FDMA_PCTRLx(x) (FDMA_PCTRL0 + (x * 0x18))
++#define SDMA_PCTRL0 0x2F00
++#define SDMA_PCTRLx(x) (SDMA_PCTRL0 + (x * 0x18))
++
++/* buffer management */
++#define BM_PCFG0 0x200
++#define BM_PCFGx(x) (BM_PCFG0 + (x * 8))
++
++/* MDIO */
++#define MDIO_GLOB 0x0000
++#define MDIO_CTRL 0x0020
++#define MDIO_READ 0x0024
++#define MDIO_WRITE 0x0028
++#define MDIO_PHY0 0x0054
++#define MDIO_PHY(x) (0x0054 - (x * sizeof(unsigned)))
++#define MDIO_CLK_CFG0 0x002C
++#define MDIO_CLK_CFG1 0x0030
++
++#define MDIO_GLOB_ENABLE 0x8000
++#define MDIO_BUSY BIT(12)
++#define MDIO_RD BIT(11)
++#define MDIO_WR BIT(10)
++#define MDIO_MASK 0x1f
++#define MDIO_ADDRSHIFT 5
++#define MDIO1_25MHZ 9
++
++#define MDIO_PHY_LINK_DOWN 0x4000
++#define MDIO_PHY_LINK_UP 0x2000
++
++#define MDIO_PHY_SPEED_M10 0x0000
++#define MDIO_PHY_SPEED_M100 0x0800
++#define MDIO_PHY_SPEED_G1 0x1000
++
++#define MDIO_PHY_FDUP_EN 0x0600
++#define MDIO_PHY_FDUP_DIS 0x0200
++
++#define MDIO_PHY_LINK_MASK 0x6000
++#define MDIO_PHY_SPEED_MASK 0x1800
++#define MDIO_PHY_FDUP_MASK 0x0600
++#define MDIO_PHY_ADDR_MASK 0x001f
++#define MDIO_UPDATE_MASK MDIO_PHY_ADDR_MASK | MDIO_PHY_LINK_MASK | \
++ MDIO_PHY_SPEED_MASK | MDIO_PHY_FDUP_MASK
++
++/* MII */
++#define MII_CFG(p) (p * 8)
++
++#define MII_CFG_EN BIT(14)
++
++#define MII_CFG_MODE_MIIP 0x0
++#define MII_CFG_MODE_MIIM 0x1
++#define MII_CFG_MODE_RMIIP 0x2
++#define MII_CFG_MODE_RMIIM 0x3
++#define MII_CFG_MODE_RGMII 0x4
++#define MII_CFG_MODE_MASK 0xf
++
++#define MII_CFG_RATE_M2P5 0x00
++#define MII_CFG_RATE_M25 0x10
++#define MII_CFG_RATE_M125 0x20
++#define MII_CFG_RATE_M50 0x30
++#define MII_CFG_RATE_AUTO 0x40
++#define MII_CFG_RATE_MASK 0x70
++
++/* cpu port mac */
++#define PMAC_HD_CTL 0x0000
++#define PMAC_RX_IPG 0x0024
++#define PMAC_EWAN 0x002c
++
++#define PMAC_IPG_MASK 0xf
++#define PMAC_HD_CTL_AS 0x0008
++#define PMAC_HD_CTL_AC 0x0004
++#define PMAC_HD_CTL_RXSH 0x0040
++#define PMAC_HD_CTL_AST 0x0080
++#define PMAC_HD_CTL_RST 0x0100
++
++/* PCE */
++#define PCE_TBL_KEY(x) (0x1100 + ((7 - x) * 4))
++#define PCE_TBL_MASK 0x1120
++#define PCE_TBL_VAL(x) (0x1124 + ((4 - x) * 4))
++#define PCE_TBL_ADDR 0x1138
++#define PCE_TBL_CTRL 0x113c
++#define PCE_PMAP1 0x114c
++#define PCE_PMAP2 0x1150
++#define PCE_PMAP3 0x1154
++#define PCE_GCTRL_REG(x) (0x1158 + (x * 4))
++#define PCE_PCTRL_REG(p, x) (0x1200 + (((p * 0xa) + x) * 4))
++
++#define PCE_TBL_BUSY BIT(15)
++#define PCE_TBL_CFG_ADDR_MASK 0x1f
++#define PCE_TBL_CFG_ADWR 0x20
++#define PCE_TBL_CFG_ADWR_MASK 0x60
++#define PCE_INGRESS BIT(11)
++
++/* MAC */
++#define MAC_FLEN_REG (0x2314)
++#define MAC_CTRL_REG(p, x) (0x240c + (((p * 0xc) + x) * 4))
++
++/* buffer management */
++#define BM_PCFG(p) (0x200 + (p * 8))
++
++/* special tag in TX path header */
++#define SPID_SHIFT 24
++#define DPID_SHIFT 16
++#define DPID_ENABLE 1
++#define SPID_CPU_PORT 2
++#define PORT_MAP_SEL BIT(15)
++#define PORT_MAP_EN BIT(14)
++#define PORT_MAP_SHIFT 1
++#define PORT_MAP_MASK 0x3f
++
++#define SPPID_MASK 0x7
++#define SPPID_SHIFT 4
++
++/* MII regs not yet in linux */
++#define MDIO_DEVAD_NONE (-1)
++#define ADVERTIZE_MPD (1 << 10)
++
++struct xrx200_port {
++ u8 num;
++ u8 phy_addr;
++ u16 flags;
++ phy_interface_t phy_if;
++
++ int link;
++ int gpio;
++ enum of_gpio_flags gpio_flags;
++
++ struct phy_device *phydev;
++ struct device_node *phy_node;
++};
++
++struct xrx200_chan {
++ int idx;
++ int refcount;
++ int tx_free;
++
++ struct net_device dummy_dev;
++ struct net_device *devs[XRX200_MAX_DEV];
++
++ struct napi_struct napi;
++ struct ltq_dma_channel dma;
++ struct sk_buff *skb[LTQ_DESC_NUM];
++};
++
++struct xrx200_hw {
++ struct clk *clk;
++ struct mii_bus *mii_bus;
++
++ struct xrx200_chan chan[XRX200_MAX_DMA];
++
++ struct net_device *devs[XRX200_MAX_DEV];
++ int num_devs;
++
++ int port_map[XRX200_MAX_PORT];
++ unsigned short wan_map;
++
++ spinlock_t lock;
++};
++
++struct xrx200_priv {
++ struct net_device_stats stats;
++ int id;
++
++ struct xrx200_port port[XRX200_MAX_PORT];
++ int num_port;
++ int wan;
++ unsigned short port_map;
++ const void *mac;
++
++ struct xrx200_hw *hw;
++};
++
++static __iomem void *xrx200_switch_membase;
++static __iomem void *xrx200_mii_membase;
++static __iomem void *xrx200_mdio_membase;
++static __iomem void *xrx200_pmac_membase;
++
++#define ltq_switch_r32(x) ltq_r32(xrx200_switch_membase + (x))
++#define ltq_switch_w32(x, y) ltq_w32(x, xrx200_switch_membase + (y))
++#define ltq_switch_w32_mask(x, y, z) \
++ ltq_w32_mask(x, y, xrx200_switch_membase + (z))
++
++#define ltq_mdio_r32(x) ltq_r32(xrx200_mdio_membase + (x))
++#define ltq_mdio_w32(x, y) ltq_w32(x, xrx200_mdio_membase + (y))
++#define ltq_mdio_w32_mask(x, y, z) \
++ ltq_w32_mask(x, y, xrx200_mdio_membase + (z))
++
++#define ltq_mii_r32(x) ltq_r32(xrx200_mii_membase + (x))
++#define ltq_mii_w32(x, y) ltq_w32(x, xrx200_mii_membase + (y))
++#define ltq_mii_w32_mask(x, y, z) \
++ ltq_w32_mask(x, y, xrx200_mii_membase + (z))
++
++#define ltq_pmac_r32(x) ltq_r32(xrx200_pmac_membase + (x))
++#define ltq_pmac_w32(x, y) ltq_w32(x, xrx200_pmac_membase + (y))
++#define ltq_pmac_w32_mask(x, y, z) \
++ ltq_w32_mask(x, y, xrx200_pmac_membase + (z))
++
++static int xrx200_open(struct net_device *dev)
++{
++ struct xrx200_priv *priv = netdev_priv(dev);
++ unsigned long flags;
++ int i;
++
++ for (i = 0; i < XRX200_MAX_DMA; i++) {
++ if (!priv->hw->chan[i].dma.irq)
++ continue;
++ spin_lock_irqsave(&priv->hw->lock, flags);
++ if (!priv->hw->chan[i].refcount) {
++ napi_enable(&priv->hw->chan[i].napi);
++ ltq_dma_open(&priv->hw->chan[i].dma);
++ }
++ priv->hw->chan[i].refcount++;
++ spin_unlock_irqrestore(&priv->hw->lock, flags);
++ }
++ for (i = 0; i < priv->num_port; i++)
++ if (priv->port[i].phydev)
++ phy_start(priv->port[i].phydev);
++ netif_start_queue(dev);
++
++ return 0;
++}
++
++static int xrx200_close(struct net_device *dev)
++{
++ struct xrx200_priv *priv = netdev_priv(dev);
++ unsigned long flags;
++ int i;
++
++ netif_stop_queue(dev);
++
++ for (i = 0; i < priv->num_port; i++)
++ if (priv->port[i].phydev)
++ phy_stop(priv->port[i].phydev);
++
++ for (i = 0; i < XRX200_MAX_DMA; i++) {
++ if (!priv->hw->chan[i].dma.irq)
++ continue;
++ spin_lock_irqsave(&priv->hw->lock, flags);
++ priv->hw->chan[i].refcount--;
++ if (!priv->hw->chan[i].refcount) {
++ napi_disable(&priv->hw->chan[i].napi);
++ ltq_dma_close(&priv->hw->chan[XRX200_DMA_RX].dma);
++ }
++ spin_unlock_irqrestore(&priv->hw->lock, flags);
++ }
++
++ return 0;
++}
++
++static int xrx200_alloc_skb(struct xrx200_chan *ch)
++{
++#define DMA_PAD (NET_IP_ALIGN + NET_SKB_PAD)
++ ch->skb[ch->dma.desc] = dev_alloc_skb(XRX200_DMA_DATA_LEN + DMA_PAD);
++ if (!ch->skb[ch->dma.desc])
++ return -ENOMEM;
++
++ skb_reserve(ch->skb[ch->dma.desc], NET_SKB_PAD);
++ ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
++ ch->skb[ch->dma.desc]->data, XRX200_DMA_DATA_LEN,
++ DMA_FROM_DEVICE);
++ ch->dma.desc_base[ch->dma.desc].addr =
++ CPHYSADDR(ch->skb[ch->dma.desc]->data);
++ ch->dma.desc_base[ch->dma.desc].ctl =
++ LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
++ XRX200_DMA_DATA_LEN;
++ skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN);
++
++ return 0;
++}
++
++static void xrx200_hw_receive(struct xrx200_chan *ch, int id)
++{
++ struct net_device *dev = ch->devs[id];
++ struct xrx200_priv *priv = netdev_priv(dev);
++ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
++ struct sk_buff *skb = ch->skb[ch->dma.desc];
++ int len = (desc->ctl & LTQ_DMA_SIZE_MASK) - XRX200_DMA_CRC_LEN;
++ unsigned long flags;
++
++ spin_lock_irqsave(&priv->hw->lock, flags);
++ if (xrx200_alloc_skb(ch)) {
++ netdev_err(dev,
++ "failed to allocate new rx buffer, stopping DMA\n");
++ ltq_dma_close(&ch->dma);
++ }
++
++ ch->dma.desc++;
++ ch->dma.desc %= LTQ_DESC_NUM;
++ spin_unlock_irqrestore(&priv->hw->lock, flags);
++
++ skb_put(skb, len);
++#ifdef SW_ROUTING
++ skb_pull(skb, 8);
++#endif
++ skb->dev = dev;
++ skb->protocol = eth_type_trans(skb, dev);
++ netif_receive_skb(skb);
++ priv->stats.rx_packets++;
++ priv->stats.rx_bytes+=len;
++}
++
++static int xrx200_poll_rx(struct napi_struct *napi, int budget)
++{
++ struct xrx200_chan *ch = container_of(napi,
++ struct xrx200_chan, napi);
++ struct xrx200_priv *priv = netdev_priv(ch->devs[0]);
++ int rx = 0;
++ int complete = 0;
++ unsigned long flags;
++
++ while ((rx < budget) && !complete) {
++ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
++ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
++#ifdef SW_ROUTING
++ struct sk_buff *skb = ch->skb[ch->dma.desc];
++ u32 *special_tag = (u32*)skb->data;
++ int port = (special_tag[1] >> SPPID_SHIFT) & SPPID_MASK;
++ xrx200_hw_receive(ch, priv->hw->port_map[port]);
++#else
++ xrx200_hw_receive(ch, 0);
++#endif
++ rx++;
++ } else {
++ complete = 1;
++ }
++ }
++ if (complete || !rx) {
++ napi_complete(&ch->napi);
++ spin_lock_irqsave(&priv->hw->lock, flags);
++ ltq_dma_ack_irq(&ch->dma);
++ spin_unlock_irqrestore(&priv->hw->lock, flags);
++ }
++ return rx;
++}
++
++static int xrx200_poll_tx(struct napi_struct *napi, int budget)
++{
++ struct xrx200_chan *ch =
++ container_of(napi, struct xrx200_chan, napi);
++ struct xrx200_priv *priv = netdev_priv(ch->devs[0]);
++ unsigned long flags;
++ int i;
++
++ spin_lock_irqsave(&priv->hw->lock, flags);
++ while ((ch->dma.desc_base[ch->tx_free].ctl &
++ (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
++ dev_kfree_skb_any(ch->skb[ch->tx_free]);
++ ch->skb[ch->tx_free] = NULL;
++ memset(&ch->dma.desc_base[ch->tx_free], 0,
++ sizeof(struct ltq_dma_desc));
++ ch->tx_free++;
++ ch->tx_free %= LTQ_DESC_NUM;
++ }
++ spin_unlock_irqrestore(&priv->hw->lock, flags);
++
++ for (i = 0; i < XRX200_MAX_DEV && ch->devs[i]; i++) {
++ struct netdev_queue *txq =
++ netdev_get_tx_queue(ch->devs[i], 0);
++ if (netif_tx_queue_stopped(txq))
++ netif_tx_start_queue(txq);
++ }
++ napi_complete(&ch->napi);
++ spin_lock_irqsave(&priv->hw->lock, flags);
++ ltq_dma_ack_irq(&ch->dma);
++ spin_unlock_irqrestore(&priv->hw->lock, flags);
++
++ return 1;
++}
++
++static struct net_device_stats *xrx200_get_stats (struct net_device *dev)
++{
++ struct xrx200_priv *priv = netdev_priv(dev);
++
++ return &priv->stats;
++}
++
++static void xrx200_tx_timeout(struct net_device *dev)
++{
++ struct xrx200_priv *priv = netdev_priv(dev);
++
++ printk(KERN_ERR "%s: transmit timed out, disable the dma channel irq\n", dev->name);
++
++ priv->stats.tx_errors++;
++ netif_wake_queue(dev);
++}
++
++static int xrx200_start_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++ int queue = skb_get_queue_mapping(skb);
++ struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
++ struct xrx200_priv *priv = netdev_priv(dev);
++ struct xrx200_chan *ch = &priv->hw->chan[XRX200_DMA_TX];
++ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
++ unsigned long flags;
++ u32 byte_offset;
++ int len;
++#ifdef SW_ROUTING
++ #ifdef SW_PORTMAP
++ u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | PORT_MAP_SEL | PORT_MAP_EN | DPID_ENABLE;
++ #else
++ u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | DPID_ENABLE;
++ #endif
++#endif
++
++ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
++
++ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
++ netdev_err(dev, "tx ring full\n");
++ netif_tx_stop_queue(txq);
++ return NETDEV_TX_BUSY;
++ }
++#ifdef SW_ROUTING
++ #ifdef SW_PORTMAP
++ special_tag |= priv->port_map << PORT_MAP_SHIFT;
++ #else
++ if(priv->id)
++ special_tag |= (1 << DPID_SHIFT);
++ #endif
++ if(skb_headroom(skb) < 4) {
++ struct sk_buff *tmp = skb_realloc_headroom(skb, 4);
++ dev_kfree_skb_any(skb);
++ skb = tmp;
++ }
++ skb_push(skb, 4);
++ memcpy(skb->data, &special_tag, sizeof(u32));
++ len += 4;
++#endif
++
++ /* dma needs to start on a 16 byte aligned address */
++ byte_offset = CPHYSADDR(skb->data) % 16;
++ ch->skb[ch->dma.desc] = skb;
++
++ dev->trans_start = jiffies;
++
++ spin_lock_irqsave(&priv->hw->lock, flags);
++ desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len,
++ DMA_TO_DEVICE)) - byte_offset;
++ wmb();
++ desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
++ LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
++ ch->dma.desc++;
++ ch->dma.desc %= LTQ_DESC_NUM;
++ spin_unlock_irqrestore(&priv->hw->lock, flags);
++
++ if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
++ netif_tx_stop_queue(txq);
++
++ priv->stats.tx_packets++;
++ priv->stats.tx_bytes+=len;
++
++ return NETDEV_TX_OK;
++}
++
++static irqreturn_t xrx200_dma_irq(int irq, void *priv)
++{
++ struct xrx200_hw *hw = priv;
++ int ch = irq - XRX200_DMA_IRQ;
++
++ napi_schedule(&hw->chan[ch].napi);
++
++ return IRQ_HANDLED;
++}
++
++static int xrx200_dma_init(struct xrx200_hw *hw)
++{
++ int i, err = 0;
++
++ ltq_dma_init_port(DMA_PORT_ETOP);
++
++ for (i = 0; i < 8 && !err; i++) {
++ int irq = XRX200_DMA_IRQ + i;
++ struct xrx200_chan *ch = &hw->chan[i];
++
++ ch->idx = ch->dma.nr = i;
++
++ if (i == XRX200_DMA_TX) {
++ ltq_dma_alloc_tx(&ch->dma);
++ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_tx", hw);
++ } else if (i == XRX200_DMA_RX) {
++ ltq_dma_alloc_rx(&ch->dma);
++ for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
++ ch->dma.desc++)
++ if (xrx200_alloc_skb(ch))
++ err = -ENOMEM;
++ ch->dma.desc = 0;
++ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_rx", hw);
++ } else
++ continue;
++
++ if (!err)
++ ch->dma.irq = irq;
++ }
++
++ return err;
++}
++
++#ifdef SW_POLLING
++static void xrx200_gmac_update(struct xrx200_port *port)
++{
++ u16 phyaddr = port->phydev->addr & MDIO_PHY_ADDR_MASK;
++ u16 miimode = ltq_mii_r32(MII_CFG(port->num)) & MII_CFG_MODE_MASK;
++ u16 miirate = 0;
++
++ switch (port->phydev->speed) {
++ case SPEED_1000:
++ phyaddr |= MDIO_PHY_SPEED_G1;
++ miirate = MII_CFG_RATE_M125;
++ break;
++
++ case SPEED_100:
++ phyaddr |= MDIO_PHY_SPEED_M100;
++ switch (miimode) {
++ case MII_CFG_MODE_RMIIM:
++ case MII_CFG_MODE_RMIIP:
++ miirate = MII_CFG_RATE_M50;
++ break;
++ default:
++ miirate = MII_CFG_RATE_M25;
++ break;
++ }
++ break;
++
++ default:
++ phyaddr |= MDIO_PHY_SPEED_M10;
++ miirate = MII_CFG_RATE_M2P5;
++ break;
++ }
++
++ if (port->phydev->link)
++ phyaddr |= MDIO_PHY_LINK_UP;
++ else
++ phyaddr |= MDIO_PHY_LINK_DOWN;
++
++ if (port->phydev->duplex == DUPLEX_FULL)
++ phyaddr |= MDIO_PHY_FDUP_EN;
++ else
++ phyaddr |= MDIO_PHY_FDUP_DIS;
++
++ ltq_mdio_w32_mask(MDIO_UPDATE_MASK, phyaddr, MDIO_PHY(port->num));
++ ltq_mii_w32_mask(MII_CFG_RATE_MASK, miirate, MII_CFG(port->num));
++ udelay(1);
++}
++#else
++static void xrx200_gmac_update(struct xrx200_port *port)
++{
++
++}
++#endif
++
++static void xrx200_mdio_link(struct net_device *dev)
++{
++ struct xrx200_priv *priv = netdev_priv(dev);
++ int i;
++
++ for (i = 0; i < priv->num_port; i++) {
++ if (!priv->port[i].phydev)
++ continue;
++
++ if (priv->port[i].link != priv->port[i].phydev->link) {
++ xrx200_gmac_update(&priv->port[i]);
++ priv->port[i].link = priv->port[i].phydev->link;
++ netdev_info(dev, "port %d %s link\n",
++ priv->port[i].num,
++ (priv->port[i].link)?("got"):("lost"));
++ }
++ }
++}
++
++static inline int xrx200_mdio_poll(struct mii_bus *bus)
++{
++ unsigned cnt = 10000;
++
++ while (likely(cnt--)) {
++ unsigned ctrl = ltq_mdio_r32(MDIO_CTRL);
++ if ((ctrl & MDIO_BUSY) == 0)
++ return 0;
++ }
++
++ return 1;
++}
++
++static int xrx200_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val)
++{
++ if (xrx200_mdio_poll(bus))
++ return 1;
++
++ ltq_mdio_w32(val, MDIO_WRITE);
++ ltq_mdio_w32(MDIO_BUSY | MDIO_WR |
++ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) |
++ (reg & MDIO_MASK),
++ MDIO_CTRL);
++
++ return 0;
++}
++
++static int xrx200_mdio_rd(struct mii_bus *bus, int addr, int reg)
++{
++ if (xrx200_mdio_poll(bus))
++ return -1;
++
++ ltq_mdio_w32(MDIO_BUSY | MDIO_RD |
++ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) |
++ (reg & MDIO_MASK),
++ MDIO_CTRL);
++
++ if (xrx200_mdio_poll(bus))
++ return -1;
++
++ return ltq_mdio_r32(MDIO_READ);
++}
++
++static int xrx200_mdio_probe(struct net_device *dev, struct xrx200_port *port)
++{
++ struct xrx200_priv *priv = netdev_priv(dev);
++ struct phy_device *phydev = NULL;
++ unsigned val;
++
++ phydev = priv->hw->mii_bus->phy_map[port->phy_addr];
++
++ if (!phydev) {
++ netdev_err(dev, "no PHY found\n");
++ return -ENODEV;
++ }
++
++ phydev = phy_connect(dev, dev_name(&phydev->dev), &xrx200_mdio_link,
++ 0, port->phy_if);
++
++ if (IS_ERR(phydev)) {
++ netdev_err(dev, "Could not attach to PHY\n");
++ return PTR_ERR(phydev);
++ }
++
++ phydev->supported &= (SUPPORTED_10baseT_Half
++ | SUPPORTED_10baseT_Full
++ | SUPPORTED_100baseT_Half
++ | SUPPORTED_100baseT_Full
++ | SUPPORTED_1000baseT_Half
++ | SUPPORTED_1000baseT_Full
++ | SUPPORTED_Autoneg
++ | SUPPORTED_MII
++ | SUPPORTED_TP);
++ phydev->advertising = phydev->supported;
++ port->phydev = phydev;
++
++ pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
++ dev->name, phydev->drv->name,
++ dev_name(&phydev->dev), phydev->irq);
++
++#ifdef SW_POLLING
++ phy_read_status(phydev);
++
++ val = xrx200_mdio_rd(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000);
++ val |= ADVERTIZE_MPD;
++ xrx200_mdio_wr(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000, val);
++ xrx200_mdio_wr(priv->hw->mii_bus, 0, 0, 0x1040);
++
++ phy_start_aneg(phydev);
++#endif
++ return 0;
++}
++
++static void xrx200_port_config(struct xrx200_priv *priv,
++ const struct xrx200_port *port)
++{
++ u16 miimode = 0;
++
++ switch (port->num) {
++ case 0: /* xMII0 */
++ case 1: /* xMII1 */
++ switch (port->phy_if) {
++ case PHY_INTERFACE_MODE_MII:
++ if (port->flags & XRX200_PORT_TYPE_PHY)
++ /* MII MAC mode, connected to external PHY */
++ miimode = MII_CFG_MODE_MIIM;
++ else
++ /* MII PHY mode, connected to external MAC */
++ miimode = MII_CFG_MODE_MIIP;
++ break;
++ case PHY_INTERFACE_MODE_RMII:
++ if (port->flags & XRX200_PORT_TYPE_PHY)
++ /* RMII MAC mode, connected to external PHY */
++ miimode = MII_CFG_MODE_RMIIM;
++ else
++ /* RMII PHY mode, connected to external MAC */
++ miimode = MII_CFG_MODE_RMIIP;
++ break;
++ case PHY_INTERFACE_MODE_RGMII:
++ /* RGMII MAC mode, connected to external PHY */
++ miimode = MII_CFG_MODE_RGMII;
++ break;
++ default:
++ break;
++ }
++ break;
++ case 2: /* internal GPHY0 */
++ case 3: /* internal GPHY0 */
++ case 4: /* internal GPHY1 */
++ switch (port->phy_if) {
++ case PHY_INTERFACE_MODE_MII:
++ case PHY_INTERFACE_MODE_GMII:
++ /* MII MAC mode, connected to internal GPHY */
++ miimode = MII_CFG_MODE_MIIM;
++ break;
++ default:
++ break;
++ }
++ break;
++ case 5: /* internal GPHY1 or xMII2 */
++ switch (port->phy_if) {
++ case PHY_INTERFACE_MODE_MII:
++ /* MII MAC mode, connected to internal GPHY */
++ miimode = MII_CFG_MODE_MIIM;
++ break;
++ case PHY_INTERFACE_MODE_RGMII:
++ /* RGMII MAC mode, connected to external PHY */
++ miimode = MII_CFG_MODE_RGMII;
++ break;
++ default:
++ break;
++ }
++ break;
++ default:
++ break;
++ }
++
++ ltq_mii_w32_mask(MII_CFG_MODE_MASK, miimode | MII_CFG_EN,
++ MII_CFG(port->num));
++}
++
++static int xrx200_init(struct net_device *dev)
++{
++ struct xrx200_priv *priv = netdev_priv(dev);
++ struct sockaddr mac;
++ int err, i;
++
++#ifndef SW_POLLING
++ unsigned int reg = 0;
++
++ /* enable auto polling */
++ for (i = 0; i < priv->num_port; i++)
++ reg |= BIT(priv->port[i].num);
++ ltq_mdio_w32(reg, MDIO_CLK_CFG0);
++ ltq_mdio_w32(MDIO1_25MHZ, MDIO_CLK_CFG1);
++#endif
++
++ /* setup each port */
++ for (i = 0; i < priv->num_port; i++)
++ xrx200_port_config(priv, &priv->port[i]);
++
++ memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
++ if (!is_valid_ether_addr(mac.sa_data)) {
++ pr_warn("net-xrx200: invalid MAC, using random\n");
++ eth_random_addr(mac.sa_data);
++ dev->addr_assign_type |= NET_ADDR_RANDOM;
++ }
++
++ err = eth_mac_addr(dev, &mac);
++ if (err)
++ goto err_netdev;
++
++ for (i = 0; i < priv->num_port; i++)
++ if (xrx200_mdio_probe(dev, &priv->port[i]))
++ pr_warn("xrx200-mdio: probing phy of port %d failed\n",
++ priv->port[i].num);
++
++ return 0;
++
++err_netdev:
++ unregister_netdev(dev);
++ free_netdev(dev);
++ return err;
++}
++
++static void xrx200_pci_microcode(void)
++{
++ int i;
++
++ ltq_switch_w32_mask(PCE_TBL_CFG_ADDR_MASK | PCE_TBL_CFG_ADWR_MASK,
++ PCE_TBL_CFG_ADWR, PCE_TBL_CTRL);
++ ltq_switch_w32(0, PCE_TBL_MASK);
++
++ for (i = 0; i < ARRAY_SIZE(pce_microcode); i++) {
++ ltq_switch_w32(i, PCE_TBL_ADDR);
++ ltq_switch_w32(pce_microcode[i].val[3], PCE_TBL_VAL(0));
++ ltq_switch_w32(pce_microcode[i].val[2], PCE_TBL_VAL(1));
++ ltq_switch_w32(pce_microcode[i].val[1], PCE_TBL_VAL(2));
++ ltq_switch_w32(pce_microcode[i].val[0], PCE_TBL_VAL(3));
++
++ // start the table access:
++ ltq_switch_w32_mask(0, PCE_TBL_BUSY, PCE_TBL_CTRL);
++ while (ltq_switch_r32(PCE_TBL_CTRL) & PCE_TBL_BUSY);
++ }
++
++ /* tell the switch that the microcode is loaded */
++ ltq_switch_w32_mask(0, BIT(3), PCE_GCTRL_REG(0));
++}
++
++static void xrx200_hw_init(struct xrx200_hw *hw)
++{
++ int i;
++
++ /* enable clock gate */
++ clk_enable(hw->clk);
++
++ ltq_switch_w32(1, 0);
++ mdelay(100);
++ ltq_switch_w32(0, 0);
++ /*
++ * TODO: we should really disbale all phys/miis here and explicitly
++ * enable them in the device secific init function
++ */
++
++ /* disable port fetch/store dma */
++ for (i = 0; i < 7; i++ ) {
++ ltq_switch_w32(0, FDMA_PCTRLx(i));
++ ltq_switch_w32(0, SDMA_PCTRLx(i));
++ }
++
++ /* enable Switch */
++ ltq_mdio_w32_mask(0, MDIO_GLOB_ENABLE, MDIO_GLOB);
++
++ /* load the pce microcode */
++ xrx200_pci_microcode();
++
++ /* Default unknown Broadcat/Multicast/Unicast port maps */
++ ltq_switch_w32(0x7f, PCE_PMAP1);
++ ltq_switch_w32(0x7f, PCE_PMAP2);
++ ltq_switch_w32(0x7f, PCE_PMAP3);
++
++ /* RMON Counter Enable for all physical ports */
++ for (i = 0; i < 7; i++)
++ ltq_switch_w32(0x1, BM_PCFG(i));
++
++ /* disable auto polling */
++ ltq_mdio_w32(0x0, MDIO_CLK_CFG0);
++
++ /* enable port statistic counters */
++ for (i = 0; i < 7; i++)
++ ltq_switch_w32(0x1, BM_PCFGx(i));
++
++ /* set IPG to 12 */
++ ltq_pmac_w32_mask(PMAC_IPG_MASK, 0xb, PMAC_RX_IPG);
++
++#ifdef SW_ROUTING
++ /* enable status header, enable CRC */
++ ltq_pmac_w32_mask(0,
++ PMAC_HD_CTL_RST | PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS | PMAC_HD_CTL_AC,
++ PMAC_HD_CTL);
++#else
++ /* disable status header, enable CRC */
++ ltq_pmac_w32_mask(PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS,
++ PMAC_HD_CTL_AC,
++ PMAC_HD_CTL);
++#endif
++
++ /* enable port fetch/store dma */
++ for (i = 0; i < 7; i++ ) {
++ ltq_switch_w32_mask(0, 0x01, FDMA_PCTRLx(i));
++ ltq_switch_w32_mask(0, 0x01, SDMA_PCTRLx(i));
++ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(i, 0));
++ }
++
++ /* enable special tag insertion on cpu port */
++ ltq_switch_w32_mask(0, 0x02, FDMA_PCTRLx(6));
++ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(6, 0));
++ ltq_switch_w32_mask(0, BIT(3), MAC_CTRL_REG(6, 2));
++ ltq_switch_w32(1518 + 8 + 4 * 2, MAC_FLEN_REG);
++}
++
++static void xrx200_hw_cleanup(struct xrx200_hw *hw)
++{
++ int i;
++
++ /* disable the switch */
++ ltq_mdio_w32_mask(MDIO_GLOB_ENABLE, 0, MDIO_GLOB);
++
++ /* free the channels and IRQs */
++ for (i = 0; i < 2; i++) {
++ ltq_dma_free(&hw->chan[i].dma);
++ if (hw->chan[i].dma.irq)
++ free_irq(hw->chan[i].dma.irq, hw);
++ }
++
++ /* free the allocated RX ring */
++ for (i = 0; i < LTQ_DESC_NUM; i++)
++ dev_kfree_skb_any(hw->chan[XRX200_DMA_RX].skb[i]);
++
++ /* clear the mdio bus */
++ mdiobus_unregister(hw->mii_bus);
++ mdiobus_free(hw->mii_bus);
++
++ /* release the clock */
++ clk_disable(hw->clk);
++ clk_put(hw->clk);
++}
++
++static int xrx200_of_mdio(struct xrx200_hw *hw, struct device_node *np)
++{
++ int i;
++ hw->mii_bus = mdiobus_alloc();
++ if (!hw->mii_bus)
++ return -ENOMEM;
++
++ hw->mii_bus->read = xrx200_mdio_rd;
++ hw->mii_bus->write = xrx200_mdio_wr;
++ hw->mii_bus->name = "lantiq,xrx200-mdio";
++ snprintf(hw->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
++
++ if (of_mdiobus_register(hw->mii_bus, np)) {
++ mdiobus_free(hw->mii_bus);
++ return -ENXIO;
++ }
++
++ return 0;
++}
++
++static void xrx200_of_port(struct xrx200_priv *priv, struct device_node *port)
++{
++ const __be32 *addr, *id = of_get_property(port, "reg", NULL);
++ struct xrx200_port *p = &priv->port[priv->num_port];
++
++ if (!id)
++ return;
++
++ memset(p, 0, sizeof(struct xrx200_port));
++ p->phy_node = of_parse_phandle(port, "phy-handle", 0);
++ addr = of_get_property(p->phy_node, "reg", NULL);
++ if (!addr)
++ return;
++
++ p->num = *id;
++ p->phy_addr = *addr;
++ p->phy_if = of_get_phy_mode(port);
++ if (p->phy_addr > 0x10)
++ p->flags = XRX200_PORT_TYPE_MAC;
++ else
++ p->flags = XRX200_PORT_TYPE_PHY;
++ priv->num_port++;
++
++ p->gpio = of_get_gpio_flags(port, 0, &p->gpio_flags);
++ if (gpio_is_valid(p->gpio))
++ if (!gpio_request(p->gpio, "phy-reset")) {
++ gpio_direction_output(p->gpio,
++ (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (1) : (0));
++ udelay(100);
++ gpio_set_value(p->gpio, (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1));
++ }
++ /* is this port a wan port ? */
++ if (priv->wan)
++ priv->hw->wan_map |= BIT(p->num);
++
++ priv->port_map |= BIT(p->num);
++
++ /* store the port id in the hw struct so we can map ports -> devices */
++ priv->hw->port_map[p->num] = priv->hw->num_devs;
++}
++
++static const struct net_device_ops xrx200_netdev_ops = {
++ .ndo_init = xrx200_init,
++ .ndo_open = xrx200_open,
++ .ndo_stop = xrx200_close,
++ .ndo_start_xmit = xrx200_start_xmit,
++ .ndo_set_mac_address = eth_mac_addr,
++ .ndo_validate_addr = eth_validate_addr,
++ .ndo_change_mtu = eth_change_mtu,
++ .ndo_get_stats = xrx200_get_stats,
++ .ndo_tx_timeout = xrx200_tx_timeout,
++};
++
++static void xrx200_of_iface(struct xrx200_hw *hw, struct device_node *iface)
++{
++ struct xrx200_priv *priv;
++ struct device_node *port;
++ const __be32 *wan;
++
++ /* alloc the network device */
++ hw->devs[hw->num_devs] = alloc_etherdev(sizeof(struct xrx200_priv));
++ if (!hw->devs[hw->num_devs])
++ return;
++
++ /* setup the network device */
++ strcpy(hw->devs[hw->num_devs]->name, "eth%d");
++ hw->devs[hw->num_devs]->netdev_ops = &xrx200_netdev_ops;
++ hw->devs[hw->num_devs]->watchdog_timeo = XRX200_TX_TIMEOUT;
++ hw->devs[hw->num_devs]->needed_headroom = XRX200_HEADROOM;
++
++ /* setup our private data */
++ priv = netdev_priv(hw->devs[hw->num_devs]);
++ priv->hw = hw;
++ priv->mac = of_get_mac_address(iface);
++ priv->id = hw->num_devs;
++
++ /* is this the wan interface ? */
++ wan = of_get_property(iface, "lantiq,wan", NULL);
++ if (wan && (*wan == 1))
++ priv->wan = 1;
++
++ /* load the ports that are part of the interface */
++ for_each_child_of_node(iface, port)
++ if (of_device_is_compatible(port, "lantiq,xrx200-pdi-port"))
++ xrx200_of_port(priv, port);
++
++ /* register the actual device */
++ if (!register_netdev(hw->devs[hw->num_devs]))
++ hw->num_devs++;
++}
++
++static struct xrx200_hw xrx200_hw;
++
++static int xrx200_probe(struct platform_device *pdev)
++{
++ struct resource *res[4];
++ struct device_node *mdio_np, *iface_np;
++ int i;
++
++ /* load the memory ranges */
++ for (i = 0; i < 4; i++) {
++ res[i] = platform_get_resource(pdev, IORESOURCE_MEM, i);
++ if (!res[i]) {
++ dev_err(&pdev->dev, "failed to get resources\n");
++ return -ENOENT;
++ }
++ }
++ xrx200_switch_membase = devm_request_and_ioremap(&pdev->dev, res[0]);
++ xrx200_mdio_membase = devm_request_and_ioremap(&pdev->dev, res[1]);
++ xrx200_mii_membase = devm_request_and_ioremap(&pdev->dev, res[2]);
++ xrx200_pmac_membase = devm_request_and_ioremap(&pdev->dev, res[3]);
++ if (!xrx200_switch_membase || !xrx200_mdio_membase ||
++ !xrx200_mii_membase || !xrx200_pmac_membase) {
++ dev_err(&pdev->dev, "failed to request and remap io ranges \n");
++ return -ENOMEM;
++ }
++
++ /* get the clock */
++ xrx200_hw.clk = clk_get(&pdev->dev, NULL);
++ if (IS_ERR(xrx200_hw.clk)) {
++ dev_err(&pdev->dev, "failed to get clock\n");
++ return PTR_ERR(xrx200_hw.clk);
++ }
++
++ /* bring up the dma engine and IP core */
++ spin_lock_init(&xrx200_hw.lock);
++ xrx200_dma_init(&xrx200_hw);
++ xrx200_hw_init(&xrx200_hw);
++
++ /* bring up the mdio bus */
++ mdio_np = of_find_compatible_node(pdev->dev.of_node, NULL,
++ "lantiq,xrx200-mdio");
++ if (mdio_np)
++ if (xrx200_of_mdio(&xrx200_hw, mdio_np))
++ dev_err(&pdev->dev, "mdio probe failed\n");
++
++ /* load the interfaces */
++ for_each_child_of_node(pdev->dev.of_node, iface_np)
++ if (of_device_is_compatible(iface_np, "lantiq,xrx200-pdi")) {
++ if (xrx200_hw.num_devs < XRX200_MAX_DEV)
++ xrx200_of_iface(&xrx200_hw, iface_np);
++ else
++ dev_err(&pdev->dev,
++ "only %d interfaces allowed\n",
++ XRX200_MAX_DEV);
++ }
++
++ if (!xrx200_hw.num_devs) {
++ xrx200_hw_cleanup(&xrx200_hw);
++ dev_err(&pdev->dev, "failed to load interfaces\n");
++ return -ENOENT;
++ }
++
++ /* set wan port mask */
++ ltq_pmac_w32(xrx200_hw.wan_map, PMAC_EWAN);
++
++ for (i = 0; i < xrx200_hw.num_devs; i++) {
++ xrx200_hw.chan[XRX200_DMA_RX].devs[i] = xrx200_hw.devs[i];
++ xrx200_hw.chan[XRX200_DMA_TX].devs[i] = xrx200_hw.devs[i];
++ }
++
++ /* setup NAPI */
++ init_dummy_netdev(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev);
++ init_dummy_netdev(&xrx200_hw.chan[XRX200_DMA_TX].dummy_dev);
++ netif_napi_add(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev,
++ &xrx200_hw.chan[XRX200_DMA_RX].napi, xrx200_poll_rx, 32);
++ netif_napi_add(&xrx200_hw.chan[XRX200_DMA_TX].dummy_dev,
++ &xrx200_hw.chan[XRX200_DMA_TX].napi, xrx200_poll_tx, 8);
++
++ platform_set_drvdata(pdev, &xrx200_hw);
++
++ return 0;
++}
++
++static int xrx200_remove(struct platform_device *pdev)
++{
++ struct net_device *dev = platform_get_drvdata(pdev);
++ struct xrx200_priv *priv;
++
++ if (!dev)
++ return 0;
++
++ priv = netdev_priv(dev);
++
++ /* free stack related instances */
++ netif_stop_queue(dev);
++ netif_napi_del(&xrx200_hw.chan[XRX200_DMA_RX].napi);
++ netif_napi_del(&xrx200_hw.chan[XRX200_DMA_TX].napi);
++
++ /* shut down hardware */
++ xrx200_hw_cleanup(&xrx200_hw);
++
++ /* remove the actual device */
++ unregister_netdev(dev);
++ free_netdev(dev);
++
++ return 0;
++}
++
++static const struct of_device_id xrx200_match[] = {
++ { .compatible = "lantiq,xrx200-net" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, xrx200_match);
++
++static struct platform_driver xrx200_driver = {
++ .probe = xrx200_probe,
++ .remove = xrx200_remove,
++ .driver = {
++ .name = "lantiq,xrx200-net",
++ .of_match_table = xrx200_match,
++ .owner = THIS_MODULE,
++ },
++};
++
++module_platform_driver(xrx200_driver);
++
++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
++MODULE_DESCRIPTION("Lantiq SoC XRX200 ethernet");
++MODULE_LICENSE("GPL");
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0026-NET-MIPS-lantiq-update-etop-driver-for-devicetree.patch b/target/linux/lantiq/patches-3.8/0026-NET-MIPS-lantiq-update-etop-driver-for-devicetree.patch
new file mode 100644
index 0000000..ee5420e
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0026-NET-MIPS-lantiq-update-etop-driver-for-devicetree.patch
@@ -0,0 +1,832 @@
+From 32010516999c75d8e8ea95779137438f4f6d06ae Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 13 Mar 2013 09:32:16 +0100
+Subject: [PATCH 26/40] NET: MIPS: lantiq: update etop driver for devicetree
+
+---
+ drivers/net/ethernet/lantiq_etop.c | 496 +++++++++++++++++++++++++-----------
+ 1 file changed, 351 insertions(+), 145 deletions(-)
+
+diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
+index c124e67..91a37f1 100644
+--- a/drivers/net/ethernet/lantiq_etop.c
++++ b/drivers/net/ethernet/lantiq_etop.c
+@@ -12,7 +12,7 @@
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2011-12 John Crispin <blogic@openwrt.org>
+ */
+
+ #include <linux/kernel.h>
+@@ -36,6 +36,10 @@
+ #include <linux/io.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/module.h>
++#include <linux/clk.h>
++#include <linux/of_net.h>
++#include <linux/of_irq.h>
++#include <linux/of_platform.h>
+
+ #include <asm/checksum.h>
+
+@@ -71,25 +75,61 @@
+ #define ETOP_MII_REVERSE 0xe
+ #define ETOP_PLEN_UNDER 0x40
+ #define ETOP_CGEN 0x800
+-
+-/* use 2 static channels for TX/RX */
+-#define LTQ_ETOP_TX_CHANNEL 1
+-#define LTQ_ETOP_RX_CHANNEL 6
+-#define IS_TX(x) (x == LTQ_ETOP_TX_CHANNEL)
+-#define IS_RX(x) (x == LTQ_ETOP_RX_CHANNEL)
+-
++#define ETOP_CFG_MII0 0x01
++
++#define LTQ_GBIT_MDIO_CTL 0xCC
++#define LTQ_GBIT_MDIO_DATA 0xd0
++#define LTQ_GBIT_GCTL0 0x68
++#define LTQ_GBIT_PMAC_HD_CTL 0x8c
++#define LTQ_GBIT_P0_CTL 0x4
++#define LTQ_GBIT_PMAC_RX_IPG 0xa8
++#define LTQ_GBIT_RGMII_CTL 0x78
++
++#define PMAC_HD_CTL_AS (1 << 19)
++#define PMAC_HD_CTL_RXSH (1 << 22)
++
++/* Switch Enable (0=disable, 1=enable) */
++#define GCTL0_SE 0x80000000
++/* Disable MDIO auto polling (0=disable, 1=enable) */
++#define PX_CTL_DMDIO 0x00400000
++
++/* MDC clock divider, clock = 25MHz/((MDC_CLOCK + 1) * 2) */
++#define MDC_CLOCK_MASK 0xff000000
++#define MDC_CLOCK_OFFSET 24
++
++/* register information for the gbit's MDIO bus */
++#define MDIO_XR9_REQUEST 0x00008000
++#define MDIO_XR9_READ 0x00000800
++#define MDIO_XR9_WRITE 0x00000400
++#define MDIO_XR9_REG_MASK 0x1f
++#define MDIO_XR9_ADDR_MASK 0x1f
++#define MDIO_XR9_RD_MASK 0xffff
++#define MDIO_XR9_REG_OFFSET 0
++#define MDIO_XR9_ADDR_OFFSET 5
++#define MDIO_XR9_WR_OFFSET 16
++
++#define LTQ_DMA_ETOP ((of_machine_is_compatible("lantiq,ase")) ? \
++ (INT_NUM_IM3_IRL0) : (INT_NUM_IM2_IRL0))
++
++/* the newer xway socks have a embedded 3/7 port gbit multiplexer */
+ #define ltq_etop_r32(x) ltq_r32(ltq_etop_membase + (x))
+ #define ltq_etop_w32(x, y) ltq_w32(x, ltq_etop_membase + (y))
+ #define ltq_etop_w32_mask(x, y, z) \
+ ltq_w32_mask(x, y, ltq_etop_membase + (z))
+
+-#define DRV_VERSION "1.0"
++#define ltq_gbit_r32(x) ltq_r32(ltq_gbit_membase + (x))
++#define ltq_gbit_w32(x, y) ltq_w32(x, ltq_gbit_membase + (y))
++#define ltq_gbit_w32_mask(x, y, z) \
++ ltq_w32_mask(x, y, ltq_gbit_membase + (z))
++
++#define DRV_VERSION "1.2"
+
+ static void __iomem *ltq_etop_membase;
++static void __iomem *ltq_gbit_membase;
+
+ struct ltq_etop_chan {
+- int idx;
+ int tx_free;
++ int irq;
+ struct net_device *netdev;
+ struct napi_struct napi;
+ struct ltq_dma_channel dma;
+@@ -99,22 +139,35 @@ struct ltq_etop_chan {
+ struct ltq_etop_priv {
+ struct net_device *netdev;
+ struct platform_device *pdev;
+- struct ltq_eth_data *pldata;
+ struct resource *res;
+
+ struct mii_bus *mii_bus;
+ struct phy_device *phydev;
+
+- struct ltq_etop_chan ch[MAX_DMA_CHAN];
+- int tx_free[MAX_DMA_CHAN >> 1];
++ struct ltq_etop_chan txch;
++ struct ltq_etop_chan rxch;
++
++ int tx_irq;
++ int rx_irq;
++
++ const void *mac;
++ int mii_mode;
+
+ spinlock_t lock;
++
++ struct clk *clk_ppe;
++ struct clk *clk_switch;
++ struct clk *clk_ephy;
++ struct clk *clk_ephycgu;
+ };
+
++static int ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr,
++ int phy_reg, u16 phy_data);
++
+ static int
+ ltq_etop_alloc_skb(struct ltq_etop_chan *ch)
+ {
+- ch->skb[ch->dma.desc] = netdev_alloc_skb(ch->netdev, MAX_DMA_DATA_LEN);
++ ch->skb[ch->dma.desc] = dev_alloc_skb(MAX_DMA_DATA_LEN);
+ if (!ch->skb[ch->dma.desc])
+ return -ENOMEM;
+ ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
+@@ -149,8 +202,11 @@ ltq_etop_hw_receive(struct ltq_etop_chan *ch)
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ skb_put(skb, len);
++ skb->dev = ch->netdev;
+ skb->protocol = eth_type_trans(skb, ch->netdev);
+ netif_receive_skb(skb);
++ ch->netdev->stats.rx_packets++;
++ ch->netdev->stats.rx_bytes += len;
+ }
+
+ static int
+@@ -158,8 +214,10 @@ ltq_etop_poll_rx(struct napi_struct *napi, int budget)
+ {
+ struct ltq_etop_chan *ch = container_of(napi,
+ struct ltq_etop_chan, napi);
++ struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
+ int rx = 0;
+ int complete = 0;
++ unsigned long flags;
+
+ while ((rx < budget) && !complete) {
+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+@@ -173,7 +231,9 @@ ltq_etop_poll_rx(struct napi_struct *napi, int budget)
+ }
+ if (complete || !rx) {
+ napi_complete(&ch->napi);
++ spin_lock_irqsave(&priv->lock, flags);
+ ltq_dma_ack_irq(&ch->dma);
++ spin_unlock_irqrestore(&priv->lock, flags);
+ }
+ return rx;
+ }
+@@ -185,12 +245,14 @@ ltq_etop_poll_tx(struct napi_struct *napi, int budget)
+ container_of(napi, struct ltq_etop_chan, napi);
+ struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
+ struct netdev_queue *txq =
+- netdev_get_tx_queue(ch->netdev, ch->idx >> 1);
++ netdev_get_tx_queue(ch->netdev, ch->dma.nr >> 1);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ while ((ch->dma.desc_base[ch->tx_free].ctl &
+ (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
++ ch->netdev->stats.tx_packets++;
++ ch->netdev->stats.tx_bytes += ch->skb[ch->tx_free]->len;
+ dev_kfree_skb_any(ch->skb[ch->tx_free]);
+ ch->skb[ch->tx_free] = NULL;
+ memset(&ch->dma.desc_base[ch->tx_free], 0,
+@@ -203,7 +265,9 @@ ltq_etop_poll_tx(struct napi_struct *napi, int budget)
+ if (netif_tx_queue_stopped(txq))
+ netif_tx_start_queue(txq);
+ napi_complete(&ch->napi);
++ spin_lock_irqsave(&priv->lock, flags);
+ ltq_dma_ack_irq(&ch->dma);
++ spin_unlock_irqrestore(&priv->lock, flags);
+ return 1;
+ }
+
+@@ -211,9 +275,10 @@ static irqreturn_t
+ ltq_etop_dma_irq(int irq, void *_priv)
+ {
+ struct ltq_etop_priv *priv = _priv;
+- int ch = irq - LTQ_DMA_CH0_INT;
+-
+- napi_schedule(&priv->ch[ch].napi);
++ if (irq == priv->txch.dma.irq)
++ napi_schedule(&priv->txch.napi);
++ else
++ napi_schedule(&priv->rxch.napi);
+ return IRQ_HANDLED;
+ }
+
+@@ -225,7 +290,7 @@ ltq_etop_free_channel(struct net_device *dev, struct ltq_etop_chan *ch)
+ ltq_dma_free(&ch->dma);
+ if (ch->dma.irq)
+ free_irq(ch->dma.irq, priv);
+- if (IS_RX(ch->idx)) {
++ if (ch == &priv->txch) {
+ int desc;
+ for (desc = 0; desc < LTQ_DESC_NUM; desc++)
+ dev_kfree_skb_any(ch->skb[ch->dma.desc]);
+@@ -236,23 +301,59 @@ static void
+ ltq_etop_hw_exit(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+- int i;
+
+- ltq_pmu_disable(PMU_PPE);
+- for (i = 0; i < MAX_DMA_CHAN; i++)
+- if (IS_TX(i) || IS_RX(i))
+- ltq_etop_free_channel(dev, &priv->ch[i]);
++ clk_disable(priv->clk_ppe);
++
++ if (of_machine_is_compatible("lantiq,ar9"))
++ clk_disable(priv->clk_switch);
++
++ if (of_machine_is_compatible("lantiq,ase")) {
++ clk_disable(priv->clk_ephy);
++ clk_disable(priv->clk_ephycgu);
++ }
++
++ ltq_etop_free_channel(dev, &priv->txch);
++ ltq_etop_free_channel(dev, &priv->rxch);
++}
++
++static void
++ltq_etop_gbit_init(struct net_device *dev)
++{
++ struct ltq_etop_priv *priv = netdev_priv(dev);
++
++ clk_enable(priv->clk_switch);
++
++ ltq_gbit_w32_mask(0, GCTL0_SE, LTQ_GBIT_GCTL0);
++ /** Disable MDIO auto polling mode */
++ ltq_gbit_w32_mask(0, PX_CTL_DMDIO, LTQ_GBIT_P0_CTL);
++ /* set 1522 packet size */
++ ltq_gbit_w32_mask(0x300, 0, LTQ_GBIT_GCTL0);
++ /* disable pmac & dmac headers */
++ ltq_gbit_w32_mask(PMAC_HD_CTL_AS | PMAC_HD_CTL_RXSH, 0,
++ LTQ_GBIT_PMAC_HD_CTL);
++ /* Due to traffic halt when burst length 8,
++ replace default IPG value with 0x3B */
++ ltq_gbit_w32(0x3B, LTQ_GBIT_PMAC_RX_IPG);
++ /* set mdc clock to 2.5 MHz */
++ ltq_gbit_w32_mask(MDC_CLOCK_MASK, 4 << MDC_CLOCK_OFFSET,
++ LTQ_GBIT_RGMII_CTL);
+ }
+
+ static int
+ ltq_etop_hw_init(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+- int i;
++ int mii_mode = priv->mii_mode;
++
++ clk_enable(priv->clk_ppe);
+
+- ltq_pmu_enable(PMU_PPE);
++ if (of_machine_is_compatible("lantiq,ar9")) {
++ ltq_etop_gbit_init(dev);
++ /* force the etops link to the gbit to MII */
++ mii_mode = PHY_INTERFACE_MODE_MII;
++ }
+
+- switch (priv->pldata->mii_mode) {
++ switch (mii_mode) {
+ case PHY_INTERFACE_MODE_RMII:
+ ltq_etop_w32_mask(ETOP_MII_MASK,
+ ETOP_MII_REVERSE, LTQ_ETOP_CFG);
+@@ -264,39 +365,68 @@ ltq_etop_hw_init(struct net_device *dev)
+ break;
+
+ default:
++ if (of_machine_is_compatible("lantiq,ase")) {
++ clk_enable(priv->clk_ephy);
++ /* disable external MII */
++ ltq_etop_w32_mask(0, ETOP_CFG_MII0, LTQ_ETOP_CFG);
++ /* enable clock for internal PHY */
++ clk_enable(priv->clk_ephycgu);
++ /* we need to write this magic to the internal phy to
++ make it work */
++ ltq_etop_mdio_wr(NULL, 0x8, 0x12, 0xC020);
++ pr_info("Selected EPHY mode\n");
++ break;
++ }
+ netdev_err(dev, "unknown mii mode %d\n",
+- priv->pldata->mii_mode);
++ mii_mode);
+ return -ENOTSUPP;
+ }
+
+ /* enable crc generation */
+ ltq_etop_w32(PPE32_CGEN, LQ_PPE32_ENET_MAC_CFG);
+
++ return 0;
++}
++
++static int
++ltq_etop_dma_init(struct net_device *dev)
++{
++ struct ltq_etop_priv *priv = netdev_priv(dev);
++ int tx = priv->tx_irq - LTQ_DMA_ETOP;
++ int rx = priv->rx_irq - LTQ_DMA_ETOP;
++ int err;
++
+ ltq_dma_init_port(DMA_PORT_ETOP);
+
+- for (i = 0; i < MAX_DMA_CHAN; i++) {
+- int irq = LTQ_DMA_CH0_INT + i;
+- struct ltq_etop_chan *ch = &priv->ch[i];
+-
+- ch->idx = ch->dma.nr = i;
+-
+- if (IS_TX(i)) {
+- ltq_dma_alloc_tx(&ch->dma);
+- request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
+- "etop_tx", priv);
+- } else if (IS_RX(i)) {
+- ltq_dma_alloc_rx(&ch->dma);
+- for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
+- ch->dma.desc++)
+- if (ltq_etop_alloc_skb(ch))
+- return -ENOMEM;
+- ch->dma.desc = 0;
+- request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
+- "etop_rx", priv);
++ priv->txch.dma.nr = tx;
++ ltq_dma_alloc_tx(&priv->txch.dma);
++ err = request_irq(priv->tx_irq, ltq_etop_dma_irq, IRQF_DISABLED,
++ "eth_tx", priv);
++ if (err) {
++ netdev_err(dev, "failed to allocate tx irq\n");
++ goto err_out;
++ }
++ priv->txch.dma.irq = priv->tx_irq;
++
++ priv->rxch.dma.nr = rx;
++ ltq_dma_alloc_rx(&priv->rxch.dma);
++ for (priv->rxch.dma.desc = 0; priv->rxch.dma.desc < LTQ_DESC_NUM;
++ priv->rxch.dma.desc++) {
++ if (ltq_etop_alloc_skb(&priv->rxch)) {
++ netdev_err(dev, "failed to allocate skbs\n");
++ err = -ENOMEM;
++ goto err_out;
+ }
+- ch->dma.irq = irq;
+ }
+- return 0;
++ priv->rxch.dma.desc = 0;
++ err = request_irq(priv->rx_irq, ltq_etop_dma_irq, IRQF_DISABLED,
++ "eth_rx", priv);
++ if (err)
++ netdev_err(dev, "failed to allocate rx irq\n");
++ else
++ priv->rxch.dma.irq = priv->rx_irq;
++err_out:
++ return err;
+ }
+
+ static void
+@@ -312,7 +442,10 @@ ltq_etop_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+
+- return phy_ethtool_gset(priv->phydev, cmd);
++ if (priv->phydev)
++ return phy_ethtool_gset(priv->phydev, cmd);
++ else
++ return 0;
+ }
+
+ static int
+@@ -320,7 +453,10 @@ ltq_etop_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+
+- return phy_ethtool_sset(priv->phydev, cmd);
++ if (priv->phydev)
++ return phy_ethtool_sset(priv->phydev, cmd);
++ else
++ return 0;
+ }
+
+ static int
+@@ -328,7 +464,10 @@ ltq_etop_nway_reset(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+
+- return phy_start_aneg(priv->phydev);
++ if (priv->phydev)
++ return phy_start_aneg(priv->phydev);
++ else
++ return 0;
+ }
+
+ static const struct ethtool_ops ltq_etop_ethtool_ops = {
+@@ -339,6 +478,39 @@ static const struct ethtool_ops ltq_etop_ethtool_ops = {
+ };
+
+ static int
++ltq_etop_mdio_wr_xr9(struct mii_bus *bus, int phy_addr,
++ int phy_reg, u16 phy_data)
++{
++ u32 val = MDIO_XR9_REQUEST | MDIO_XR9_WRITE |
++ (phy_data << MDIO_XR9_WR_OFFSET) |
++ ((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) |
++ ((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET);
++
++ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
++ ;
++ ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL);
++ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
++ ;
++ return 0;
++}
++
++static int
++ltq_etop_mdio_rd_xr9(struct mii_bus *bus, int phy_addr, int phy_reg)
++{
++ u32 val = MDIO_XR9_REQUEST | MDIO_XR9_READ |
++ ((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) |
++ ((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET);
++
++ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
++ ;
++ ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL);
++ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
++ ;
++ val = ltq_gbit_r32(LTQ_GBIT_MDIO_DATA) & MDIO_XR9_RD_MASK;
++ return val;
++}
++
++static int
+ ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data)
+ {
+ u32 val = MDIO_REQUEST |
+@@ -379,14 +551,18 @@ ltq_etop_mdio_probe(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+ struct phy_device *phydev = NULL;
+- int phy_addr;
+-
+- for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+- if (priv->mii_bus->phy_map[phy_addr]) {
+- phydev = priv->mii_bus->phy_map[phy_addr];
+- break;
+- }
+- }
++ u32 phy_supported = (SUPPORTED_10baseT_Half
++ | SUPPORTED_10baseT_Full
++ | SUPPORTED_100baseT_Half
++ | SUPPORTED_100baseT_Full
++ | SUPPORTED_Autoneg
++ | SUPPORTED_MII
++ | SUPPORTED_TP);
++
++ if (of_machine_is_compatible("lantiq,ase"))
++ phydev = priv->mii_bus->phy_map[8];
++ else
++ phydev = priv->mii_bus->phy_map[0];
+
+ if (!phydev) {
+ netdev_err(dev, "no PHY found\n");
+@@ -394,21 +570,18 @@ ltq_etop_mdio_probe(struct net_device *dev)
+ }
+
+ phydev = phy_connect(dev, dev_name(&phydev->dev), &ltq_etop_mdio_link,
+- 0, priv->pldata->mii_mode);
++ 0, priv->mii_mode);
+
+ if (IS_ERR(phydev)) {
+ netdev_err(dev, "Could not attach to PHY\n");
+ return PTR_ERR(phydev);
+ }
+
+- phydev->supported &= (SUPPORTED_10baseT_Half
+- | SUPPORTED_10baseT_Full
+- | SUPPORTED_100baseT_Half
+- | SUPPORTED_100baseT_Full
+- | SUPPORTED_Autoneg
+- | SUPPORTED_MII
+- | SUPPORTED_TP);
++ if (of_machine_is_compatible("lantiq,ar9"))
++ phy_supported |= SUPPORTED_1000baseT_Half
++ | SUPPORTED_1000baseT_Full;
+
++ phydev->supported &= phy_supported;
+ phydev->advertising = phydev->supported;
+ priv->phydev = phydev;
+ pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
+@@ -433,8 +606,13 @@ ltq_etop_mdio_init(struct net_device *dev)
+ }
+
+ priv->mii_bus->priv = dev;
+- priv->mii_bus->read = ltq_etop_mdio_rd;
+- priv->mii_bus->write = ltq_etop_mdio_wr;
++ if (of_machine_is_compatible("lantiq,ar9")) {
++ priv->mii_bus->read = ltq_etop_mdio_rd_xr9;
++ priv->mii_bus->write = ltq_etop_mdio_wr_xr9;
++ } else {
++ priv->mii_bus->read = ltq_etop_mdio_rd;
++ priv->mii_bus->write = ltq_etop_mdio_wr;
++ }
+ priv->mii_bus->name = "ltq_mii";
+ snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
+ priv->pdev->name, priv->pdev->id);
+@@ -483,17 +661,19 @@ static int
+ ltq_etop_open(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+- int i;
++ unsigned long flags;
+
+- for (i = 0; i < MAX_DMA_CHAN; i++) {
+- struct ltq_etop_chan *ch = &priv->ch[i];
++ napi_enable(&priv->txch.napi);
++ napi_enable(&priv->rxch.napi);
++
++ spin_lock_irqsave(&priv->lock, flags);
++ ltq_dma_open(&priv->txch.dma);
++ ltq_dma_open(&priv->rxch.dma);
++ spin_unlock_irqrestore(&priv->lock, flags);
++
++ if (priv->phydev)
++ phy_start(priv->phydev);
+
+- if (!IS_TX(i) && (!IS_RX(i)))
+- continue;
+- ltq_dma_open(&ch->dma);
+- napi_enable(&ch->napi);
+- }
+- phy_start(priv->phydev);
+ netif_tx_start_all_queues(dev);
+ return 0;
+ }
+@@ -502,18 +682,19 @@ static int
+ ltq_etop_stop(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+- int i;
++ unsigned long flags;
+
+ netif_tx_stop_all_queues(dev);
+- phy_stop(priv->phydev);
+- for (i = 0; i < MAX_DMA_CHAN; i++) {
+- struct ltq_etop_chan *ch = &priv->ch[i];
++ if (priv->phydev)
++ phy_stop(priv->phydev);
++ napi_disable(&priv->txch.napi);
++ napi_disable(&priv->rxch.napi);
++
++ spin_lock_irqsave(&priv->lock, flags);
++ ltq_dma_close(&priv->txch.dma);
++ ltq_dma_close(&priv->rxch.dma);
++ spin_unlock_irqrestore(&priv->lock, flags);
+
+- if (!IS_RX(i) && !IS_TX(i))
+- continue;
+- napi_disable(&ch->napi);
+- ltq_dma_close(&ch->dma);
+- }
+ return 0;
+ }
+
+@@ -523,16 +704,16 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
+ int queue = skb_get_queue_mapping(skb);
+ struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+- struct ltq_etop_chan *ch = &priv->ch[(queue << 1) | 1];
+- struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+- int len;
++ struct ltq_dma_desc *desc =
++ &priv->txch.dma.desc_base[priv->txch.dma.desc];
+ unsigned long flags;
+ u32 byte_offset;
++ int len;
+
+ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+
+- if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
+- dev_kfree_skb_any(skb);
++ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) ||
++ priv->txch.skb[priv->txch.dma.desc]) {
+ netdev_err(dev, "tx ring full\n");
+ netif_tx_stop_queue(txq);
+ return NETDEV_TX_BUSY;
+@@ -540,7 +721,7 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
+
+ /* dma needs to start on a 16 byte aligned address */
+ byte_offset = CPHYSADDR(skb->data) % 16;
+- ch->skb[ch->dma.desc] = skb;
++ priv->txch.skb[priv->txch.dma.desc] = skb;
+
+ dev->trans_start = jiffies;
+
+@@ -550,11 +731,11 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
+ wmb();
+ desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
+ LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
+- ch->dma.desc++;
+- ch->dma.desc %= LTQ_DESC_NUM;
++ priv->txch.dma.desc++;
++ priv->txch.dma.desc %= LTQ_DESC_NUM;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+- if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
++ if (priv->txch.dma.desc_base[priv->txch.dma.desc].ctl & LTQ_DMA_OWN)
+ netif_tx_stop_queue(txq);
+
+ return NETDEV_TX_OK;
+@@ -633,34 +814,32 @@ ltq_etop_init(struct net_device *dev)
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+ struct sockaddr mac;
+ int err;
+- bool random_mac = false;
+
+ ether_setup(dev);
+ dev->watchdog_timeo = 10 * HZ;
+ err = ltq_etop_hw_init(dev);
+ if (err)
+ goto err_hw;
++ err = ltq_etop_dma_init(dev);
++ if (err)
++ goto err_hw;
++
+ ltq_etop_change_mtu(dev, 1500);
+
+- memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
++ memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
+ if (!is_valid_ether_addr(mac.sa_data)) {
+ pr_warn("etop: invalid MAC, using random\n");
+- eth_random_addr(mac.sa_data);
+- random_mac = true;
++ random_ether_addr(mac.sa_data);
+ }
+
+ err = ltq_etop_set_mac_address(dev, &mac);
+ if (err)
+ goto err_netdev;
+-
+- /* Set addr_assign_type here, ltq_etop_set_mac_address would reset it. */
+- if (random_mac)
+- dev->addr_assign_type |= NET_ADDR_RANDOM;
+-
+ ltq_etop_set_multicast_list(dev);
+- err = ltq_etop_mdio_init(dev);
+- if (err)
+- goto err_netdev;
++ if (!ltq_etop_mdio_init(dev))
++ dev->ethtool_ops = &ltq_etop_ethtool_ops;
++ else
++ pr_warn("etop: mdio probe failed\n");;
+ return 0;
+
+ err_netdev:
+@@ -680,6 +859,9 @@ ltq_etop_tx_timeout(struct net_device *dev)
+ err = ltq_etop_hw_init(dev);
+ if (err)
+ goto err_hw;
++ err = ltq_etop_dma_init(dev);
++ if (err)
++ goto err_hw;
+ dev->trans_start = jiffies;
+ netif_wake_queue(dev);
+ return;
+@@ -703,14 +885,19 @@ static const struct net_device_ops ltq_eth_netdev_ops = {
+ .ndo_tx_timeout = ltq_etop_tx_timeout,
+ };
+
+-static int __init
++static int __devinit
+ ltq_etop_probe(struct platform_device *pdev)
+ {
+ struct net_device *dev;
+ struct ltq_etop_priv *priv;
+- struct resource *res;
++ struct resource *res, *gbit_res, irqres[2];
+ int err;
+- int i;
++
++ err = of_irq_to_resource_table(pdev->dev.of_node, irqres, 2);
++ if (err != 2) {
++ dev_err(&pdev->dev, "failed to get etop irqs\n");
++ return -EINVAL;
++ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+@@ -736,30 +923,58 @@ ltq_etop_probe(struct platform_device *pdev)
+ goto err_out;
+ }
+
+- dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
+- if (!dev) {
+- err = -ENOMEM;
+- goto err_out;
++ if (of_machine_is_compatible("lantiq,ar9")) {
++ gbit_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++ if (!gbit_res) {
++ dev_err(&pdev->dev, "failed to get gbit resource\n");
++ err = -ENOENT;
++ goto err_out;
++ }
++ ltq_gbit_membase = devm_ioremap_nocache(&pdev->dev,
++ gbit_res->start, resource_size(gbit_res));
++ if (!ltq_gbit_membase) {
++ dev_err(&pdev->dev, "failed to remap gigabit switch %d\n",
++ pdev->id);
++ err = -ENOMEM;
++ goto err_out;
++ }
+ }
++
++ dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
+ strcpy(dev->name, "eth%d");
+ dev->netdev_ops = &ltq_eth_netdev_ops;
+- dev->ethtool_ops = &ltq_etop_ethtool_ops;
+ priv = netdev_priv(dev);
+ priv->res = res;
+ priv->pdev = pdev;
+- priv->pldata = dev_get_platdata(&pdev->dev);
+ priv->netdev = dev;
++ priv->tx_irq = irqres[0].start;
++ priv->rx_irq = irqres[1].start;
++ priv->mii_mode = of_get_phy_mode(pdev->dev.of_node);
++ priv->mac = of_get_mac_address(pdev->dev.of_node);
++
++ priv->clk_ppe = clk_get(&pdev->dev, NULL);
++ if (IS_ERR(priv->clk_ppe))
++ return PTR_ERR(priv->clk_ppe);
++ if (of_machine_is_compatible("lantiq,ar9")) {
++ priv->clk_switch = clk_get(&pdev->dev, "switch");
++ if (IS_ERR(priv->clk_switch))
++ return PTR_ERR(priv->clk_switch);
++ }
++ if (of_machine_is_compatible("lantiq,ase")) {
++ priv->clk_ephy = clk_get(&pdev->dev, "ephy");
++ if (IS_ERR(priv->clk_ephy))
++ return PTR_ERR(priv->clk_ephy);
++ priv->clk_ephycgu = clk_get(&pdev->dev, "ephycgu");
++ if (IS_ERR(priv->clk_ephycgu))
++ return PTR_ERR(priv->clk_ephycgu);
++ }
++
+ spin_lock_init(&priv->lock);
+
+- for (i = 0; i < MAX_DMA_CHAN; i++) {
+- if (IS_TX(i))
+- netif_napi_add(dev, &priv->ch[i].napi,
+- ltq_etop_poll_tx, 8);
+- else if (IS_RX(i))
+- netif_napi_add(dev, &priv->ch[i].napi,
+- ltq_etop_poll_rx, 32);
+- priv->ch[i].netdev = dev;
+- }
++ netif_napi_add(dev, &priv->txch.napi, ltq_etop_poll_tx, 8);
++ netif_napi_add(dev, &priv->rxch.napi, ltq_etop_poll_rx, 32);
++ priv->txch.netdev = dev;
++ priv->rxch.netdev = dev;
+
+ err = register_netdev(dev);
+ if (err)
+@@ -788,32 +1003,23 @@ ltq_etop_remove(struct platform_device *pdev)
+ return 0;
+ }
+
++static const struct of_device_id ltq_etop_match[] = {
++ { .compatible = "lantiq,etop-xway" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, ltq_etop_match);
++
+ static struct platform_driver ltq_mii_driver = {
++ .probe = ltq_etop_probe,
+ .remove = ltq_etop_remove,
+ .driver = {
+ .name = "ltq_etop",
+ .owner = THIS_MODULE,
++ .of_match_table = ltq_etop_match,
+ },
+ };
+
+-int __init
+-init_ltq_etop(void)
+-{
+- int ret = platform_driver_probe(&ltq_mii_driver, ltq_etop_probe);
+-
+- if (ret)
+- pr_err("ltq_etop: Error registering platform driver!");
+- return ret;
+-}
+-
+-static void __exit
+-exit_ltq_etop(void)
+-{
+- platform_driver_unregister(&ltq_mii_driver);
+-}
+-
+-module_init(init_ltq_etop);
+-module_exit(exit_ltq_etop);
++module_platform_driver(ltq_mii_driver);
+
+ MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+ MODULE_DESCRIPTION("Lantiq SoC ETOP");
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0027-NET-PHY-adds-driver-for-lantiq-PHY11G.patch b/target/linux/lantiq/patches-3.8/0027-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
new file mode 100644
index 0000000..5250377
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0027-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
@@ -0,0 +1,270 @@
+From 0721e9f0502e633390044e651970692213283686 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 13 Mar 2013 09:30:22 +0100
+Subject: [PATCH 27/40] NET: PHY: adds driver for lantiq PHY11G
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/net/phy/Kconfig | 5 ++
+ drivers/net/phy/Makefile | 1 +
+ drivers/net/phy/lantiq.c | 220 ++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 226 insertions(+)
+ create mode 100644 drivers/net/phy/lantiq.c
+
+diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
+index 961f0b2..41a2992 100644
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -107,6 +107,11 @@ config MICREL_PHY
+ ---help---
+ Supports the KSZ9021, VSC8201, KS8001 PHYs.
+
++config LANTIQ_PHY
++ tristate "Driver for Lantiq PHYs"
++ ---help---
++ Supports the 11G and 22E PHYs.
++
+ config FIXED_PHY
+ bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ depends on PHYLIB=y
+diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
+index 9645e38..e2eeee3 100644
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -23,6 +23,7 @@ obj-$(CONFIG_NATIONAL_PHY) += national.o
+ obj-$(CONFIG_DP83640_PHY) += dp83640.o
+ obj-$(CONFIG_STE10XP) += ste10Xp.o
+ obj-$(CONFIG_MICREL_PHY) += micrel.o
++obj-$(CONFIG_LANTIQ_PHY) += lantiq.o
+ obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
+ obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
+ obj-$(CONFIG_AT803X_PHY) += at803x.o
+diff --git a/drivers/net/phy/lantiq.c b/drivers/net/phy/lantiq.c
+new file mode 100644
+index 0000000..418dff0
+--- /dev/null
++++ b/drivers/net/phy/lantiq.c
+@@ -0,0 +1,220 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Copyright (C) 2012 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
++ */
++
++#include <linux/module.h>
++#include <linux/phy.h>
++
++#define MII_MMDCTRL 0x0d
++#define MII_MMDDATA 0x0e
++
++#define MII_VR9_11G_IMASK 0x19 /* interrupt mask */
++#define MII_VR9_11G_ISTAT 0x1a /* interrupt status */
++
++#define INT_VR9_11G_WOL BIT(15) /* Wake-On-LAN */
++#define INT_VR9_11G_ANE BIT(11) /* Auto-Neg error */
++#define INT_VR9_11G_ANC BIT(10) /* Auto-Neg complete */
++#define INT_VR9_11G_ADSC BIT(5) /* Link auto-downspeed detect */
++#define INT_VR9_11G_DXMC BIT(2) /* Duplex mode change */
++#define INT_VR9_11G_LSPC BIT(1) /* Link speed change */
++#define INT_VR9_11G_LSTC BIT(0) /* Link state change */
++#define INT_VR9_11G_MASK (INT_VR9_11G_LSTC | INT_VR9_11G_ADSC)
++
++#define ADVERTISED_MPD BIT(10) /* Multi-port device */
++
++#define MMD_DEVAD 0x1f
++#define MMD_ACTYPE_SHIFT 14
++#define MMD_ACTYPE_ADDRESS (0 << MMD_ACTYPE_SHIFT)
++#define MMD_ACTYPE_DATA (1 << MMD_ACTYPE_SHIFT)
++#define MMD_ACTYPE_DATA_PI (2 << MMD_ACTYPE_SHIFT)
++#define MMD_ACTYPE_DATA_PIWR (3 << MMD_ACTYPE_SHIFT)
++
++static __maybe_unused int vr9_gphy_mmd_read(struct phy_device *phydev,
++ u16 regnum)
++{
++ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_ADDRESS | MMD_DEVAD);
++ phy_write(phydev, MII_MMDDATA, regnum);
++ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_DATA | MMD_DEVAD);
++
++ return phy_read(phydev, MII_MMDDATA);
++}
++
++static __maybe_unused int vr9_gphy_mmd_write(struct phy_device *phydev,
++ u16 regnum, u16 val)
++{
++ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_ADDRESS | MMD_DEVAD);
++ phy_write(phydev, MII_MMDDATA, regnum);
++ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_DATA | MMD_DEVAD);
++ phy_write(phydev, MII_MMDDATA, val);
++
++ return 0;
++}
++
++static int vr9_gphy_config_init(struct phy_device *phydev)
++{
++ int err;
++
++ dev_dbg(&phydev->dev, "%s\n", __func__);
++
++ /* Mask all interrupts */
++ err = phy_write(phydev, MII_VR9_11G_IMASK, 0);
++ if (err)
++ return err;
++
++ /* Clear all pending interrupts */
++ phy_read(phydev, MII_VR9_11G_ISTAT);
++
++ return 0;
++}
++
++static int vr9_gphy_config_aneg(struct phy_device *phydev)
++{
++ int reg, err;
++
++ /* Advertise as multi-port device */
++ reg = phy_read(phydev, MII_CTRL1000);
++ reg |= ADVERTISED_MPD;
++ err = phy_write(phydev, MII_CTRL1000, reg);
++ if (err)
++ return err;
++
++ return genphy_config_aneg(phydev);
++}
++
++static int vr9_gphy_ack_interrupt(struct phy_device *phydev)
++{
++ int reg;
++
++ /*
++ * Possible IRQ numbers:
++ * - IM3_IRL18 for GPHY0
++ * - IM3_IRL17 for GPHY1
++ *
++ * Due to a silicon bug IRQ lines are not really independent from
++ * each other. Sometimes the two lines are driven at the same time
++ * if only one GPHY core raises the interrupt.
++ */
++
++ reg = phy_read(phydev, MII_VR9_11G_ISTAT);
++
++ return (reg < 0) ? reg : 0;
++}
++
++static int vr9_gphy_did_interrupt(struct phy_device *phydev)
++{
++ int reg;
++
++ reg = phy_read(phydev, MII_VR9_11G_ISTAT);
++
++ return reg > 0;
++}
++
++static int vr9_gphy_config_intr(struct phy_device *phydev)
++{
++ int err;
++
++ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
++ err = phy_write(phydev, MII_VR9_11G_IMASK, INT_VR9_11G_MASK);
++ else
++ err = phy_write(phydev, MII_VR9_11G_IMASK, 0);
++
++ return err;
++}
++
++static struct phy_driver lantiq_phy[] = {
++ {
++ .phy_id = 0xd565a400,
++ .phy_id_mask = 0xffffffff,
++ .name = "Lantiq XWAY PEF7071",
++ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
++ .flags = 0, /*PHY_HAS_INTERRUPT,*/
++ .config_init = vr9_gphy_config_init,
++ .config_aneg = vr9_gphy_config_aneg,
++ .read_status = genphy_read_status,
++ .ack_interrupt = vr9_gphy_ack_interrupt,
++ .did_interrupt = vr9_gphy_did_interrupt,
++ .config_intr = vr9_gphy_config_intr,
++ .driver = { .owner = THIS_MODULE },
++ }, {
++ .phy_id = 0x030260D0,
++ .phy_id_mask = 0xfffffff0,
++ .name = "Lantiq XWAY VR9 GPHY 11G v1.3",
++ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
++ .flags = 0, /*PHY_HAS_INTERRUPT,*/
++ .config_init = vr9_gphy_config_init,
++ .config_aneg = vr9_gphy_config_aneg,
++ .read_status = genphy_read_status,
++ .ack_interrupt = vr9_gphy_ack_interrupt,
++ .did_interrupt = vr9_gphy_did_interrupt,
++ .config_intr = vr9_gphy_config_intr,
++ .driver = { .owner = THIS_MODULE },
++ }, {
++ .phy_id = 0xd565a408,
++ .phy_id_mask = 0xfffffff8,
++ .name = "Lantiq XWAY VR9 GPHY 11G v1.4",
++ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
++ .flags = 0, /*PHY_HAS_INTERRUPT,*/
++ .config_init = vr9_gphy_config_init,
++ .config_aneg = vr9_gphy_config_aneg,
++ .read_status = genphy_read_status,
++ .ack_interrupt = vr9_gphy_ack_interrupt,
++ .did_interrupt = vr9_gphy_did_interrupt,
++ .config_intr = vr9_gphy_config_intr,
++ .driver = { .owner = THIS_MODULE },
++ }, {
++ .phy_id = 0xd565a418,
++ .phy_id_mask = 0xfffffff8,
++ .name = "Lantiq XWAY XRX PHY22F v1.4",
++ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
++ .flags = 0, /*PHY_HAS_INTERRUPT,*/
++ .config_init = vr9_gphy_config_init,
++ .config_aneg = vr9_gphy_config_aneg,
++ .read_status = genphy_read_status,
++ .ack_interrupt = vr9_gphy_ack_interrupt,
++ .did_interrupt = vr9_gphy_did_interrupt,
++ .config_intr = vr9_gphy_config_intr,
++ .driver = { .owner = THIS_MODULE },
++ },
++};
++
++static int __init ltq_phy_init(void)
++{
++ int i;
++
++ for (i = 0; i < ARRAY_SIZE(lantiq_phy); i++) {
++ int err = phy_driver_register(&lantiq_phy[i]);
++ if (err)
++ pr_err("lantiq_phy: failed to load %s\n", lantiq_phy[i].name);
++ }
++
++ return 0;
++}
++
++static void __exit ltq_phy_exit(void)
++{
++ int i;
++
++ for (i = 0; i < ARRAY_SIZE(lantiq_phy); i++)
++ phy_driver_unregister(&lantiq_phy[i]);
++}
++
++module_init(ltq_phy_init);
++module_exit(ltq_phy_exit);
++
++MODULE_DESCRIPTION("Lantiq PHY drivers");
++MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>");
++MODULE_LICENSE("GPL");
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0028-NET-lantiq-adds-PHY11G-firmware-blobs.patch b/target/linux/lantiq/patches-3.8/0028-NET-lantiq-adds-PHY11G-firmware-blobs.patch
new file mode 100644
index 0000000..1169201
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0028-NET-lantiq-adds-PHY11G-firmware-blobs.patch
@@ -0,0 +1,373 @@
+From 9664031d0f35be450330bf30ded1c359b9074251 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 22 Oct 2012 09:26:24 +0200
+Subject: [PATCH 28/40] NET: lantiq: adds PHY11G firmware blobs
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ firmware/Makefile | 2 +
+ firmware/lantiq/COPYING | 286 +++++++++++++++++++++++++++++++++++++++++++++++
+ firmware/lantiq/README | 45 ++++++++
+ 3 files changed, 333 insertions(+)
+ create mode 100644 firmware/lantiq/COPYING
+ create mode 100644 firmware/lantiq/README
+
+diff --git a/firmware/Makefile b/firmware/Makefile
+index cbb09ce..cdc0aef 100644
+--- a/firmware/Makefile
++++ b/firmware/Makefile
+@@ -134,6 +134,8 @@ fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw
+ fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
+ fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
+ fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
++fw-shipped-$(CONFIG_SOC_TYPE_XWAY) += lantiq/vr9_phy11g_a1x.bin
++fw-shipped-$(CONFIG_SOC_TYPE_XWAY) += lantiq/vr9_phy11g_a2x.bin
+ fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin
+
+ fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
+diff --git a/firmware/lantiq/COPYING b/firmware/lantiq/COPYING
+new file mode 100644
+index 0000000..5ec70b2
+--- /dev/null
++++ b/firmware/lantiq/COPYING
+@@ -0,0 +1,286 @@
++All firmware files are copyrighted by Lantiq Deutschland GmbH.
++The files have been extracted from header files found in Lantiq BSPs.
++If not stated otherwise all files are licensed under GPL.
++
++=======================================================================
++
++ GNU GENERAL PUBLIC LICENSE
++ Version 2, June 1991
++
++ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
++ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ Everyone is permitted to copy and distribute verbatim copies
++ of this license document, but changing it is not allowed.
++
++ Preamble
++
++ The licenses for most software are designed to take away your
++freedom to share and change it. By contrast, the GNU General Public
++License is intended to guarantee your freedom to share and change free
++software--to make sure the software is free for all its users. This
++General Public License applies to most of the Free Software
++Foundation's software and to any other program whose authors commit to
++using it. (Some other Free Software Foundation software is covered by
++the GNU Library General Public License instead.) You can apply it to
++your programs, too.
++
++ When we speak of free software, we are referring to freedom, not
++price. Our General Public Licenses are designed to make sure that you
++have the freedom to distribute copies of free software (and charge for
++this service if you wish), that you receive source code or can get it
++if you want it, that you can change the software or use pieces of it
++in new free programs; and that you know you can do these things.
++
++ To protect your rights, we need to make restrictions that forbid
++anyone to deny you these rights or to ask you to surrender the rights.
++These restrictions translate to certain responsibilities for you if you
++distribute copies of the software, or if you modify it.
++
++ For example, if you distribute copies of such a program, whether
++gratis or for a fee, you must give the recipients all the rights that
++you have. You must make sure that they, too, receive or can get the
++source code. And you must show them these terms so they know their
++rights.
++
++ We protect your rights with two steps: (1) copyright the software, and
++(2) offer you this license which gives you legal permission to copy,
++distribute and/or modify the software.
++
++ Also, for each author's protection and ours, we want to make certain
++that everyone understands that there is no warranty for this free
++software. If the software is modified by someone else and passed on, we
++want its recipients to know that what they have is not the original, so
++that any problems introduced by others will not reflect on the original
++authors' reputations.
++
++ Finally, any free program is threatened constantly by software
++patents. We wish to avoid the danger that redistributors of a free
++program will individually obtain patent licenses, in effect making the
++program proprietary. To prevent this, we have made it clear that any
++patent must be licensed for everyone's free use or not licensed at all.
++
++ The precise terms and conditions for copying, distribution and
++modification follow.
++
++ GNU GENERAL PUBLIC LICENSE
++ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
++
++ 0. This License applies to any program or other work which contains
++a notice placed by the copyright holder saying it may be distributed
++under the terms of this General Public License. The "Program", below,
++refers to any such program or work, and a "work based on the Program"
++means either the Program or any derivative work under copyright law:
++that is to say, a work containing the Program or a portion of it,
++either verbatim or with modifications and/or translated into another
++language. (Hereinafter, translation is included without limitation in
++the term "modification".) Each licensee is addressed as "you".
++
++Activities other than copying, distribution and modification are not
++covered by this License; they are outside its scope. The act of
++running the Program is not restricted, and the output from the Program
++is covered only if its contents constitute a work based on the
++Program (independent of having been made by running the Program).
++Whether that is true depends on what the Program does.
++
++ 1. You may copy and distribute verbatim copies of the Program's
++source code as you receive it, in any medium, provided that you
++conspicuously and appropriately publish on each copy an appropriate
++copyright notice and disclaimer of warranty; keep intact all the
++notices that refer to this License and to the absence of any warranty;
++and give any other recipients of the Program a copy of this License
++along with the Program.
++
++You may charge a fee for the physical act of transferring a copy, and
++you may at your option offer warranty protection in exchange for a fee.
++
++ 2. You may modify your copy or copies of the Program or any portion
++of it, thus forming a work based on the Program, and copy and
++distribute such modifications or work under the terms of Section 1
++above, provided that you also meet all of these conditions:
++
++ a) You must cause the modified files to carry prominent notices
++ stating that you changed the files and the date of any change.
++
++ b) You must cause any work that you distribute or publish, that in
++ whole or in part contains or is derived from the Program or any
++ part thereof, to be licensed as a whole at no charge to all third
++ parties under the terms of this License.
++
++ c) If the modified program normally reads commands interactively
++ when run, you must cause it, when started running for such
++ interactive use in the most ordinary way, to print or display an
++ announcement including an appropriate copyright notice and a
++ notice that there is no warranty (or else, saying that you provide
++ a warranty) and that users may redistribute the program under
++ these conditions, and telling the user how to view a copy of this
++ License. (Exception: if the Program itself is interactive but
++ does not normally print such an announcement, your work based on
++ the Program is not required to print an announcement.)
++
++These requirements apply to the modified work as a whole. If
++identifiable sections of that work are not derived from the Program,
++and can be reasonably considered independent and separate works in
++themselves, then this License, and its terms, do not apply to those
++sections when you distribute them as separate works. But when you
++distribute the same sections as part of a whole which is a work based
++on the Program, the distribution of the whole must be on the terms of
++this License, whose permissions for other licensees extend to the
++entire whole, and thus to each and every part regardless of who wrote it.
++
++Thus, it is not the intent of this section to claim rights or contest
++your rights to work written entirely by you; rather, the intent is to
++exercise the right to control the distribution of derivative or
++collective works based on the Program.
++
++In addition, mere aggregation of another work not based on the Program
++with the Program (or with a work based on the Program) on a volume of
++a storage or distribution medium does not bring the other work under
++the scope of this License.
++
++ 3. You may copy and distribute the Program (or a work based on it,
++under Section 2) in object code or executable form under the terms of
++Sections 1 and 2 above provided that you also do one of the following:
++
++ a) Accompany it with the complete corresponding machine-readable
++ source code, which must be distributed under the terms of Sections
++ 1 and 2 above on a medium customarily used for software interchange; or,
++
++ b) Accompany it with a written offer, valid for at least three
++ years, to give any third party, for a charge no more than your
++ cost of physically performing source distribution, a complete
++ machine-readable copy of the corresponding source code, to be
++ distributed under the terms of Sections 1 and 2 above on a medium
++ customarily used for software interchange; or,
++
++ c) Accompany it with the information you received as to the offer
++ to distribute corresponding source code. (This alternative is
++ allowed only for noncommercial distribution and only if you
++ received the program in object code or executable form with such
++ an offer, in accord with Subsection b above.)
++
++The source code for a work means the preferred form of the work for
++making modifications to it. For an executable work, complete source
++code means all the source code for all modules it contains, plus any
++associated interface definition files, plus the scripts used to
++control compilation and installation of the executable. However, as a
++special exception, the source code distributed need not include
++anything that is normally distributed (in either source or binary
++form) with the major components (compiler, kernel, and so on) of the
++operating system on which the executable runs, unless that component
++itself accompanies the executable.
++
++If distribution of executable or object code is made by offering
++access to copy from a designated place, then offering equivalent
++access to copy the source code from the same place counts as
++distribution of the source code, even though third parties are not
++compelled to copy the source along with the object code.
++
++ 4. You may not copy, modify, sublicense, or distribute the Program
++except as expressly provided under this License. Any attempt
++otherwise to copy, modify, sublicense or distribute the Program is
++void, and will automatically terminate your rights under this License.
++However, parties who have received copies, or rights, from you under
++this License will not have their licenses terminated so long as such
++parties remain in full compliance.
++
++ 5. You are not required to accept this License, since you have not
++signed it. However, nothing else grants you permission to modify or
++distribute the Program or its derivative works. These actions are
++prohibited by law if you do not accept this License. Therefore, by
++modifying or distributing the Program (or any work based on the
++Program), you indicate your acceptance of this License to do so, and
++all its terms and conditions for copying, distributing or modifying
++the Program or works based on it.
++
++ 6. Each time you redistribute the Program (or any work based on the
++Program), the recipient automatically receives a license from the
++original licensor to copy, distribute or modify the Program subject to
++these terms and conditions. You may not impose any further
++restrictions on the recipients' exercise of the rights granted herein.
++You are not responsible for enforcing compliance by third parties to
++this License.
++
++ 7. If, as a consequence of a court judgment or allegation of patent
++infringement or for any other reason (not limited to patent issues),
++conditions are imposed on you (whether by court order, agreement or
++otherwise) that contradict the conditions of this License, they do not
++excuse you from the conditions of this License. If you cannot
++distribute so as to satisfy simultaneously your obligations under this
++License and any other pertinent obligations, then as a consequence you
++may not distribute the Program at all. For example, if a patent
++license would not permit royalty-free redistribution of the Program by
++all those who receive copies directly or indirectly through you, then
++the only way you could satisfy both it and this License would be to
++refrain entirely from distribution of the Program.
++
++If any portion of this section is held invalid or unenforceable under
++any particular circumstance, the balance of the section is intended to
++apply and the section as a whole is intended to apply in other
++circumstances.
++
++It is not the purpose of this section to induce you to infringe any
++patents or other property right claims or to contest validity of any
++such claims; this section has the sole purpose of protecting the
++integrity of the free software distribution system, which is
++implemented by public license practices. Many people have made
++generous contributions to the wide range of software distributed
++through that system in reliance on consistent application of that
++system; it is up to the author/donor to decide if he or she is willing
++to distribute software through any other system and a licensee cannot
++impose that choice.
++
++This section is intended to make thoroughly clear what is believed to
++be a consequence of the rest of this License.
++
++ 8. If the distribution and/or use of the Program is restricted in
++certain countries either by patents or by copyrighted interfaces, the
++original copyright holder who places the Program under this License
++may add an explicit geographical distribution limitation excluding
++those countries, so that distribution is permitted only in or among
++countries not thus excluded. In such case, this License incorporates
++the limitation as if written in the body of this License.
++
++ 9. The Free Software Foundation may publish revised and/or new versions
++of the General Public License from time to time. Such new versions will
++be similar in spirit to the present version, but may differ in detail to
++address new problems or concerns.
++
++Each version is given a distinguishing version number. If the Program
++specifies a version number of this License which applies to it and "any
++later version", you have the option of following the terms and conditions
++either of that version or of any later version published by the Free
++Software Foundation. If the Program does not specify a version number of
++this License, you may choose any version ever published by the Free Software
++Foundation.
++
++ 10. If you wish to incorporate parts of the Program into other free
++programs whose distribution conditions are different, write to the author
++to ask for permission. For software which is copyrighted by the Free
++Software Foundation, write to the Free Software Foundation; we sometimes
++make exceptions for this. Our decision will be guided by the two goals
++of preserving the free status of all derivatives of our free software and
++of promoting the sharing and reuse of software generally.
++
++ NO WARRANTY
++
++ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
++FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
++OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
++PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
++OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
++TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
++PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
++REPAIR OR CORRECTION.
++
++ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
++WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
++REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
++INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
++OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
++TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
++YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
++PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
++POSSIBILITY OF SUCH DAMAGES.
++
++ END OF TERMS AND CONDITIONS
+diff --git a/firmware/lantiq/README b/firmware/lantiq/README
+new file mode 100644
+index 0000000..cb1a10a
+--- /dev/null
++++ b/firmware/lantiq/README
+@@ -0,0 +1,45 @@
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++# (C) Copyright 2007 - 2012
++# Lantiq Deutschland GmbH
++#
++# (C) Copyright 2012
++# Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
++#
++
++#
++# How to use
++#
++Configure kernel with:
++CONFIG_FW_LOADER=y
++CONFIG_EXTRA_FIRMWARE_DIR="FIRMWARE_DIR"
++CONFIG_EXTRA_FIRMWARE="FIRMWARE_FILES"
++
++where FIRMWARE_DIR should point to this git tree and FIRMWARE_FILES is a list
++of space separated files from list below.
++
++#
++# Firmware files
++#
++
++# GPHY core on Lantiq XWAY VR9 v1.1
++lantiq/vr9_phy11g_a1x.bin
++lantiq/vr9_phy22f_a1x.bin
++
++# GPHY core on Lantiq XWAY VR9 v1.1
++lantiq/vr9_phy11g_a2x.bin
++lantiq/vr9_phy22f_a2x.bin
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0029-NET-lantiq-adds-gphy-clock.patch b/target/linux/lantiq/patches-3.8/0029-NET-lantiq-adds-gphy-clock.patch
new file mode 100644
index 0000000..3b50b17
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0029-NET-lantiq-adds-gphy-clock.patch
@@ -0,0 +1,24 @@
+From 9dee771f3a7e51411a408cbb1070e73a50cbd285 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 13 Mar 2013 09:47:44 +0100
+Subject: [PATCH 29/40] NET: lantiq: adds gphy clock
+
+---
+ arch/mips/lantiq/xway/sysctrl.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
+index 3390fcd..c24924f 100644
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -376,6 +376,7 @@ void __init ltq_soc_init(void)
+ PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
+ PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
+ PMU_PPE_QSB | PMU_PPE_TOP);
++ clkdev_add_pmu("1f203000.rcu", "gphy", 0, PMU_GPHY);
+ } else if (of_machine_is_compatible("lantiq,ar9")) {
+ clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
+ ltq_ar9_fpi_hz(), CLOCK_250M);
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0030-MIPS-lantiq-add-pcie-driver.patch b/target/linux/lantiq/patches-3.8/0030-MIPS-lantiq-add-pcie-driver.patch
new file mode 100644
index 0000000..dc5c545
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0030-MIPS-lantiq-add-pcie-driver.patch
@@ -0,0 +1,4786 @@
+From 86b0b37729298b067157263b7bf5dbf735527e7c Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 13 Mar 2013 09:39:02 +0100
+Subject: [PATCH 30/40] MIPS: lantiq: add pcie driver
+
+---
+ arch/mips/lantiq/Kconfig | 10 +
+ arch/mips/lantiq/xway/sysctrl.c | 2 +
+ arch/mips/pci/Makefile | 2 +
+ arch/mips/pci/fixup-lantiq-pcie.c | 82 ++
+ arch/mips/pci/fixup-lantiq.c | 3 +
+ arch/mips/pci/ifxmips_pci_common.h | 57 ++
+ arch/mips/pci/ifxmips_pcie.c | 1607 ++++++++++++++++++++++++++++++++++++
+ arch/mips/pci/ifxmips_pcie.h | 135 +++
+ arch/mips/pci/ifxmips_pcie_ar10.h | 290 +++++++
+ arch/mips/pci/ifxmips_pcie_msi.c | 392 +++++++++
+ arch/mips/pci/ifxmips_pcie_phy.c | 478 +++++++++++
+ arch/mips/pci/ifxmips_pcie_pm.c | 176 ++++
+ arch/mips/pci/ifxmips_pcie_pm.h | 36 +
+ arch/mips/pci/ifxmips_pcie_reg.h | 1001 ++++++++++++++++++++++
+ arch/mips/pci/ifxmips_pcie_vr9.h | 271 ++++++
+ arch/mips/pci/pci.c | 25 +
+ drivers/pci/pcie/aer/Kconfig | 2 +-
+ include/linux/pci.h | 2 +
+ include/linux/pci_ids.h | 6 +
+ 19 files changed, 4576 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/pci/fixup-lantiq-pcie.c
+ create mode 100644 arch/mips/pci/ifxmips_pci_common.h
+ create mode 100644 arch/mips/pci/ifxmips_pcie.c
+ create mode 100644 arch/mips/pci/ifxmips_pcie.h
+ create mode 100644 arch/mips/pci/ifxmips_pcie_ar10.h
+ create mode 100644 arch/mips/pci/ifxmips_pcie_msi.c
+ create mode 100644 arch/mips/pci/ifxmips_pcie_phy.c
+ create mode 100644 arch/mips/pci/ifxmips_pcie_pm.c
+ create mode 100644 arch/mips/pci/ifxmips_pcie_pm.h
+ create mode 100644 arch/mips/pci/ifxmips_pcie_reg.h
+ create mode 100644 arch/mips/pci/ifxmips_pcie_vr9.h
+
+diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
+index 675310a..4c9a241 100644
+--- a/arch/mips/lantiq/Kconfig
++++ b/arch/mips/lantiq/Kconfig
+@@ -18,6 +18,7 @@ config SOC_XWAY
+ bool "XWAY"
+ select SOC_TYPE_XWAY
+ select HW_HAS_PCI
++ select ARCH_SUPPORTS_MSI
+
+ config SOC_FALCON
+ bool "FALCON"
+@@ -37,6 +38,15 @@ config PCI_LANTIQ
+ bool "PCI Support"
+ depends on SOC_XWAY && PCI
+
++config PCIE_LANTIQ
++ bool "PCIE Support"
++ depends on SOC_XWAY && PCI
++
++config PCIE_LANTIQ_MSI
++ bool
++ depends on PCIE_LANTIQ && PCI_MSI
++ default y
++
+ config XRX200_PHY_FW
+ bool "XRX200 PHY firmware loader"
+ depends on SOC_XWAY
+diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
+index c24924f..e30dde8 100644
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -377,6 +377,8 @@ void __init ltq_soc_init(void)
+ PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
+ PMU_PPE_QSB | PMU_PPE_TOP);
+ clkdev_add_pmu("1f203000.rcu", "gphy", 0, PMU_GPHY);
++ pmu_w32(~0, PMU_PWDSR1);
++ pmu_w32(pmu_r32(PMU_PWDSR) & ~PMU_PCIE_CLK, PMU_PWDSR);
+ } else if (of_machine_is_compatible("lantiq,ar9")) {
+ clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
+ ltq_ar9_fpi_hz(), CLOCK_250M);
+diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
+index ce995d3..bd32fe1 100644
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -42,6 +42,8 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
+ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
+ obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
+ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
++obj-$(CONFIG_PCIE_LANTIQ) += ifxmips_pcie_phy.o ifxmips_pcie.o fixup-lantiq-pcie.o
++obj-$(CONFIG_PCIE_LANTIQ_MSI) += pcie-lantiq-msi.o
+ obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
+ obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
+ obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o
+diff --git a/arch/mips/pci/fixup-lantiq-pcie.c b/arch/mips/pci/fixup-lantiq-pcie.c
+new file mode 100644
+index 0000000..50a1c3b
+--- /dev/null
++++ b/arch/mips/pci/fixup-lantiq-pcie.c
+@@ -0,0 +1,82 @@
++/******************************************************************************
++**
++** FILE NAME : ifxmips_fixup_pcie.c
++** PROJECT : IFX UEIP for VRX200
++** MODULES : PCIe
++**
++** DATE : 02 Mar 2009
++** AUTHOR : Lei Chuanhua
++** DESCRIPTION : PCIe Root Complex Driver
++** COPYRIGHT : Copyright (c) 2009
++** Infineon Technologies AG
++** Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++** This program is free software; you can redistribute it and/or modify
++** it under the terms of the GNU General Public License as published by
++** the Free Software Foundation; either version 2 of the License, or
++** (at your option) any later version.
++** HISTORY
++** $Version $Date $Author $Comment
++** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version
++*******************************************************************************/
++/*!
++ \file ifxmips_fixup_pcie.c
++ \ingroup IFX_PCIE
++ \brief PCIe Fixup functions source file
++*/
++#include <linux/pci.h>
++#include <linux/pci_regs.h>
++#include <linux/pci_ids.h>
++
++#include <lantiq_soc.h>
++
++#include "pcie-lantiq.h"
++
++#define PCI_VENDOR_ID_INFINEON 0x15D1
++#define PCI_DEVICE_ID_INFINEON_DANUBE 0x000F
++#define PCI_DEVICE_ID_INFINEON_PCIE 0x0011
++#define PCI_VENDOR_ID_LANTIQ 0x1BEF
++#define PCI_DEVICE_ID_LANTIQ_PCIE 0x0011
++
++
++
++static void __devinit
++ifx_pcie_fixup_resource(struct pci_dev *dev)
++{
++ u32 reg;
++
++ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev));
++
++ printk("%s: fixup host controller %s (%04x:%04x)\n",
++ __func__, pci_name(dev), dev->vendor, dev->device);
++
++ /* Setup COMMAND register */
++ reg = PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER /* |
++ PCI_COMMAND_INTX_DISABLE */| PCI_COMMAND_SERR;
++ pci_write_config_word(dev, PCI_COMMAND, reg);
++ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev));
++}
++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE, ifx_pcie_fixup_resource);
++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_VENDOR_ID_LANTIQ, ifx_pcie_fixup_resource);
++
++static void __devinit
++ifx_pcie_rc_class_early_fixup(struct pci_dev *dev)
++{
++ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev));
++
++ if (dev->devfn == PCI_DEVFN(0, 0) &&
++ (dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) {
++
++ dev->class = (PCI_CLASS_BRIDGE_PCI << 8) | (dev->class & 0xff);
++
++ printk(KERN_INFO "%s: fixed pcie host bridge to pci-pci bridge\n", __func__);
++ }
++ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev));
++ mdelay(10);
++}
++
++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE,
++ ifx_pcie_rc_class_early_fixup);
++
++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_DEVICE_ID_LANTIQ_PCIE,
++ ifx_pcie_rc_class_early_fixup);
+diff --git a/arch/mips/pci/fixup-lantiq.c b/arch/mips/pci/fixup-lantiq.c
+index 6c829df..cf5c4e0 100644
+--- a/arch/mips/pci/fixup-lantiq.c
++++ b/arch/mips/pci/fixup-lantiq.c
+@@ -11,6 +11,7 @@
+
+ int (*ltq_pci_plat_arch_init)(struct pci_dev *dev) = NULL;
+ int (*ltq_pci_plat_dev_init)(struct pci_dev *dev) = NULL;
++int (*ltq_pci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin);
+
+ int pcibios_plat_dev_init(struct pci_dev *dev)
+ {
+@@ -28,6 +29,8 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+ struct of_irq dev_irq;
+ int irq;
+
++ if (ltq_pci_map_irq)
++ return ltq_pci_map_irq(dev, slot, pin);
+ if (of_irq_map_pci(dev, &dev_irq)) {
+ dev_err(&dev->dev, "trying to map irq for unknown slot:%d pin:%d\n",
+ slot, pin);
+diff --git a/arch/mips/pci/ifxmips_pci_common.h b/arch/mips/pci/ifxmips_pci_common.h
+new file mode 100644
+index 0000000..46f4cb2
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pci_common.h
+@@ -0,0 +1,57 @@
++/******************************************************************************
++**
++** FILE NAME : ifxmips_pci_common.h
++** PROJECT : IFX UEIP
++** MODULES : PCI subsystem
++**
++** DATE : 30 June 2009
++** AUTHOR : Lei Chuanhua
++** DESCRIPTION : PCIe Root Complex Driver
++** COPYRIGHT : Copyright (c) 2009
++** Infineon Technologies AG
++** Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++** This program is free software; you can redistribute it and/or modify
++** it under the terms of the GNU General Public License as published by
++** the Free Software Foundation; either version 2 of the License, or
++** (at your option) any later version.
++** HISTORY
++** $Version $Date $Author $Comment
++** 0.0.1 30 June,2009 Lei Chuanhua Initial version
++*******************************************************************************/
++
++#ifndef IFXMIPS_PCI_COMMON_H
++#define IFXMIPS_PCI_COMMON_H
++#include <linux/version.h>
++/*!
++ \defgroup IFX_PCI_COM IFX PCI/PCIe common parts for OS integration
++ \brief PCI/PCIe common parts
++*/
++
++/*!
++ \defgroup IFX_PCI_COM_OS OS APIs
++ \ingroup IFX_PCI_COM
++ \brief PCI/PCIe bus driver OS interface functions
++*/
++/*!
++ \file ifxmips_pci_common.h
++ \ingroup IFX_PCI_COM
++ \brief PCI/PCIe bus driver common OS header file
++*/
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)
++#define IFX_PCI_CONST
++#else
++#define IFX_PCI_CONST const
++#endif
++#ifdef CONFIG_IFX_PCI
++extern int ifx_pci_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin);
++extern int ifx_pci_bios_plat_dev_init(struct pci_dev *dev);
++#endif /* COFNIG_IFX_PCI */
++
++#ifdef CONFIG_IFX_PCIE
++extern int ifx_pcie_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin);
++extern int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev);
++#endif
++
++#endif /* IFXMIPS_PCI_COMMON_H */
++
+diff --git a/arch/mips/pci/ifxmips_pcie.c b/arch/mips/pci/ifxmips_pcie.c
+new file mode 100644
+index 0000000..5cebfe6
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie.c
+@@ -0,0 +1,1607 @@
++/******************************************************************************
++**
++** FILE NAME : ifxmips_pcie.c
++** PROJECT : IFX UEIP for VRX200
++** MODULES : PCI MSI sub module
++**
++** DATE : 02 Mar 2009
++** AUTHOR : Lei Chuanhua
++** DESCRIPTION : PCIe Root Complex Driver
++** COPYRIGHT : Copyright (c) 2009
++** Infineon Technologies AG
++** Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++** This program is free software; you can redistribute it and/or modify
++** it under the terms of the GNU General Public License as published by
++** the Free Software Foundation; either version 2 of the License, or
++** (at your option) any later version.
++** HISTORY
++** $Version $Date $Author $Comment
++** 0.0.1 02 Mar,2009 Lei Chuanhua Initial version
++*******************************************************************************/
++ /*!
++ \file ifxmips_pcie.c
++ \ingroup IFX_PCIE
++ \brief PCI express bus driver source file
++*/
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/mm.h>
++#include <asm/paccess.h>
++#include <linux/pci.h>
++#include <linux/pci_regs.h>
++#include <linux/module.h>
++
++#include "ifxmips_pcie.h"
++#include "ifxmips_pcie_reg.h"
++
++#define IFX_PCIE_VER_MAJOR 1
++#define IFX_PCIE_VER_MID 5
++#define IFX_PCIE_VER_MINOR 3
++
++/* Enable 32bit io due to its mem mapped io nature */
++#define IFX_PCIE_ERROR_INT
++#define CONFIG_IFX_PCIE_1ST_CORE
++#define IFX_PCIE_IO_32BIT
++
++#define IFX_PCIE_IR (INT_NUM_IM4_IRL0 + 25)
++#define IFX_PCIE_INTA (INT_NUM_IM4_IRL0 + 8)
++#define IFX_PCIE_INTB (INT_NUM_IM4_IRL0 + 9)
++#define IFX_PCIE_INTC (INT_NUM_IM4_IRL0 + 10)
++#define IFX_PCIE_INTD (INT_NUM_IM4_IRL0 + 11)
++#define MS(_v, _f) (((_v) & (_f)) >> _f##_S)
++#define SM(_v, _f) (((_v) << _f##_S) & (_f))
++#define IFX_REG_SET_BIT(_f, _r) \
++ IFX_REG_W32((IFX_REG_R32((_r)) &~ (_f)) | (_f), (_r))
++
++static DEFINE_SPINLOCK(ifx_pcie_lock);
++
++u32 g_pcie_debug_flag = PCIE_MSG_ANY & (~PCIE_MSG_CFG);
++
++static ifx_pcie_irq_t pcie_irqs[IFX_PCIE_CORE_NR] = {
++ {
++ .ir_irq = {
++ .irq = IFX_PCIE_IR,
++ .name = "ifx_pcie_rc0",
++ },
++
++ .legacy_irq = {
++ {
++ .irq_bit = PCIE_IRN_INTA,
++ .irq = IFX_PCIE_INTA,
++ },
++ {
++ .irq_bit = PCIE_IRN_INTB,
++ .irq = IFX_PCIE_INTB,
++ },
++ {
++ .irq_bit = PCIE_IRN_INTC,
++ .irq = IFX_PCIE_INTC,
++ },
++ {
++ .irq_bit = PCIE_IRN_INTD,
++ .irq = IFX_PCIE_INTD,
++ },
++ },
++ },
++
++#ifdef CONFIG_IFX_PCIE_2ND_CORE
++ {
++ .ir_irq = {
++ .irq = IFX_PCIE1_IR,
++ .name = "ifx_pcie_rc1",
++ },
++
++ .legacy_irq = {
++ {
++ .irq_bit = PCIE_IRN_INTA,
++ .irq = IFX_PCIE1_INTA,
++ },
++ {
++ .irq_bit = PCIE_IRN_INTB,
++ .irq = IFX_PCIE1_INTB,
++ },
++ {
++ .irq_bit = PCIE_IRN_INTC,
++ .irq = IFX_PCIE1_INTC,
++ },
++ {
++ .irq_bit = PCIE_IRN_INTD,
++ .irq = IFX_PCIE1_INTD,
++ },
++ },
++
++ },
++#endif /* CONFIG_IFX_PCIE_2ND_CORE */
++};
++
++void
++ifx_pcie_debug(const char *fmt, ...)
++{
++ static char buf[256] = {0}; /* XXX */
++ va_list ap;
++
++ va_start(ap, fmt);
++ vsnprintf(buf, sizeof(buf), fmt, ap);
++ va_end(ap);
++
++ printk("%s", buf);
++}
++
++#ifdef IFX_PCI_PHY_DBG
++/* Generate hot reset, XXX must catpure to verify */
++static INLINE void
++pcie_secondary_bus_reset(int pcie_port)
++{
++ int i;
++ u32 reg;
++#define IFX_PCIE_RESET_TIME 20
++
++ /* Assert Secondary Bus Reset */
++ reg = IFX_REG_R32(PCIE_INTRBCTRL(pcie_port));
++ reg |= PCIE_INTRBCTRL_RST_SECONDARY_BUS;
++ IFX_REG_W32(reg, PCIE_INTRBCTRL(pcie_port));
++
++ /* De-assert Secondary Bus Reset */
++ reg &= ~PCIE_INTRBCTRL_RST_SECONDARY_BUS;
++ IFX_REG_W32(reg, PCIE_INTRBCTRL(pcie_port));
++
++ /* XXX, wait at least 100 ms, then restore again */
++ for (i = 0; i < IFX_PCIE_RESET_TIME; i++) {
++ mdelay(10);
++ }
++#undef IFX_PCIE_RESET_TIME
++}
++
++/* Error or L0s to L0 */
++static INLINE int
++pcie_retrain_link(int pcie_port)
++{
++ int i;
++ u32 reg;
++#define IFX_PCIE_RETRAIN_TIME 1000
++
++ reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port));
++ reg |= PCIE_LCTLSTS_RETRIAN_LINK;
++ IFX_REG_W32(reg, PCIE_LCTLSTS(pcie_port));
++
++ /* Wait for the link to come up */
++ for (i = 0; i < IFX_PCIE_RETRAIN_TIME; i++) {
++ if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_RETRAIN_PENDING)) {
++ break;
++ }
++ udelay(100);
++ }
++ if (i >= IFX_PCIE_RETRAIN_TIME) {
++ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s retrain timeout\n", __func__);
++ return -1;
++ }
++ return 0;
++#undef IFX_PCIE_RETRAIN_TIME
++}
++
++static INLINE void
++pcie_disable_scrambling(int pcie_port)
++{
++ u32 reg;
++
++ reg = IFX_REG_R32(PCIE_PLCR(pcie_port));
++ reg |= PCIE_PLCR_SCRAMBLE_DISABLE;
++ IFX_REG_W32(reg, PCIE_PLCR(pcie_port));
++}
++#endif /* IFX_PCI_PHY_DBG */
++
++static INLINE int
++pcie_ltssm_enable(int pcie_port)
++{
++ int i;
++#define IFX_PCIE_LTSSM_ENABLE_TIMEOUT 10
++
++ IFX_REG_W32(PCIE_RC_CCR_LTSSM_ENABLE, PCIE_RC_CCR(pcie_port)); /* Enable LTSSM */
++
++ /* Wait for the link to come up */
++ for (i = 0; i < IFX_PCIE_LTSSM_ENABLE_TIMEOUT; i++) {
++ if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_RETRAIN_PENDING)) {
++ break;
++ }
++ udelay(10);
++ }
++ if (i >= IFX_PCIE_LTSSM_ENABLE_TIMEOUT) {
++ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s link timeout!!!!!\n", __func__);
++ return -1;
++ }
++ return 0;
++#undef IFX_PCIE_LTSSM_ENABLE_TIMEOUT
++}
++
++static INLINE void
++pcie_ltssm_disable(int pcie_port)
++{
++ IFX_REG_W32(0, PCIE_RC_CCR(pcie_port)); /* Disable LTSSM */
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_RC_CCR 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_RC_CCR(pcie_port)));
++}
++
++static INLINE void
++pcie_ahb_bus_error_suppress(int pcie_port)
++{
++ IFX_REG_W32(PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS, PCIE_AHB_CTRL(pcie_port));
++}
++
++static INLINE void
++pcie_status_register_clear(int pcie_port)
++{
++ /* Clear the status register, XXX, seperate function */
++ IFX_REG_W32(0, PCIE_RC_DR(pcie_port));
++ IFX_REG_W32(0, PCIE_PCICMDSTS(pcie_port));
++ IFX_REG_W32(0, PCIE_DCTLSTS(pcie_port));
++ IFX_REG_W32(0, PCIE_LCTLSTS(pcie_port));
++ IFX_REG_W32(0, PCIE_SLCTLSTS(pcie_port));
++ IFX_REG_W32(0, PCIE_RSTS(pcie_port));
++ IFX_REG_W32(0, PCIE_UES_R(pcie_port));
++ IFX_REG_W32(0, PCIE_UEMR(pcie_port));
++ IFX_REG_W32(0, PCIE_UESR(pcie_port));
++ IFX_REG_W32(0, PCIE_CESR(pcie_port));
++ IFX_REG_W32(0, PCIE_CEMR(pcie_port));
++ IFX_REG_W32(0, PCIE_RESR(pcie_port));
++ IFX_REG_W32(0, PCIE_PVCCRSR(pcie_port));
++ IFX_REG_W32(0, PCIE_VC0_RSR0(pcie_port));
++ IFX_REG_W32(0, PCIE_TPFCS(pcie_port));
++ IFX_REG_W32(0, PCIE_TNPFCS(pcie_port));
++ IFX_REG_W32(0, PCIE_TCFCS(pcie_port));
++ IFX_REG_W32(0, PCIE_QSR(pcie_port));
++ IFX_REG_W32(0, PCIE_IOBLSECS(pcie_port));
++}
++
++static inline int
++ifx_pcie_link_up(int pcie_port)
++{
++ return (IFX_REG_R32(PCIE_PHY_SR(pcie_port)) & PCIE_PHY_SR_PHY_LINK_UP) ? 1 : 0;
++}
++
++#ifdef IFX_PCIE_DBG
++static void
++pcie_status_registers_dump(int pcie_port)
++{
++ printk(KERN_INFO "PCIe_PCICMDSTS: 0x%08x\n", IFX_REG_R32(PCIE_PCICMDSTS(pcie_port)));
++ printk(KERN_INFO "PCIe_RC_DR: 0x%08x\n", IFX_REG_R32(PCIE_RC_DR(pcie_port)));
++ printk(KERN_INFO "PCIe_DCTLSTS: 0x%08x\n", IFX_REG_R32(PCIE_DCTLSTS(pcie_port)));
++ printk(KERN_INFO "PCIe_LCTLSTS: 0x%08x\n", IFX_REG_R32(PCIE_LCTLSTS(pcie_port)));
++ printk(KERN_INFO "PCIe_SLCTLSTS: 0x%08x\n", IFX_REG_R32(PCIE_SLCTLSTS(pcie_port)));
++ printk(KERN_INFO "PCIe_RSTS: 0x%08x\n", IFX_REG_R32(PCIE_RSTS(pcie_port)));
++ printk(KERN_INFO "PCIe_UES_R: 0x%08x\n", IFX_REG_R32(PCIE_UES_R(pcie_port)));
++ printk(KERN_INFO "PCIe_UEMR: 0x%08x\n", IFX_REG_R32(PCIE_UEMR(pcie_port)));
++ printk(KERN_INFO "PCIe_UESR: 0x%08x\n", IFX_REG_R32(PCIE_UESR(pcie_port)));
++ printk(KERN_INFO "PCIe_CESR: 0x%08x\n", IFX_REG_R32(PCIE_CESR(pcie_port)));
++ printk(KERN_INFO "PCIe_CEMR: 0x%08x\n", IFX_REG_R32(PCIE_CEMR(pcie_port)));
++ printk(KERN_INFO "PCIe_RESR: 0x%08x\n", IFX_REG_R32(PCIE_RESR(pcie_port)));
++ printk(KERN_INFO "PCIe_ESIR: 0x%08x\n", IFX_REG_R32(PCIE_ESIR(pcie_port)));
++ printk(KERN_INFO "PCIe_PVCCRSR: 0x%08x\n", IFX_REG_R32(PCIE_PVCCRSR(pcie_port)));
++ printk(KERN_INFO "PCIe_VC0_RSR0: 0x%08x\n", IFX_REG_R32(PCIE_VC0_RSR0(pcie_port)));
++ printk(KERN_INFO "PCIe_TPFCS: 0x%08x\n", IFX_REG_R32(PCIE_TPFCS(pcie_port)));
++ printk(KERN_INFO "PCIe_TNPFCS: 0x%08x\n", IFX_REG_R32(PCIE_TNPFCS(pcie_port)));
++ printk(KERN_INFO "PCIe_TCFCS: 0x%08x\n", IFX_REG_R32(PCIE_TCFCS(pcie_port)));
++ printk(KERN_INFO "PCIe_QSR: 0x%08x\n", IFX_REG_R32(PCIE_QSR(pcie_port)));
++ printk(KERN_INFO "PCIe_VCTAR1: 0x%08x\n", IFX_REG_R32(PCIE_VCTAR1(pcie_port)));
++ printk(KERN_INFO "PCIe_VCTAR2: 0x%08x\n", IFX_REG_R32(PCIE_VCTAR2(pcie_port)));
++ printk(KERN_INFO "PCIe_IOBLSECS: 0x%08x\n", IFX_REG_R32(PCIE_IOBLSECS(pcie_port)));
++ printk(KERN_INFO "PCIe_ALTRT: 0x%08x\n", IFX_REG_R32(PCIE_ALTRT(pcie_port)));
++ printk(KERN_INFO "PCIe_SNR: 0x%08x\n", IFX_REG_R32(PCIE_SNR(pcie_port)));
++ printk(KERN_INFO "PCIe_DBR0: 0x%08x\n", IFX_REG_R32(PCIE_DBR0(pcie_port)));
++ printk(KERN_INFO "PCIe_DBR1: 0x%08x\n", IFX_REG_R32(PCIE_DBR1(pcie_port)));
++}
++
++static void
++pcie_post_dump(int pcie_port)
++{
++ printk(KERN_INFO "PCIe_PCICMDSTS: 0x%08x\n", IFX_REG_R32(PCIE_PCICMDSTS(pcie_port)));
++ printk(KERN_INFO "PCIe_MBML: 0x%08x\n", IFX_REG_R32(PCIE_MBML(pcie_port)));
++ printk(KERN_INFO "PCIe_PBML: 0x%08x\n", IFX_REG_R32(PCIE_PMBL(pcie_port)));
++ printk(KERN_INFO "PCIe_IOBLSECS: 0x%08x\n", IFX_REG_R32(PCIE_IOBLSECS(pcie_port)));
++ printk(KERN_INFO "PCIe_IO_BANDL: 0x%08x\n", IFX_REG_R32(PCIE_IO_BANDL(pcie_port)));
++ printk(KERN_INFO "PCIe_INTRBCTRL: 0x%08x\n", IFX_REG_R32(PCIE_INTRBCTRL(pcie_port)));
++ printk(KERN_INFO "Power State: D%1d\n", IFX_REG_R32(PCIE_PM_CSR(pcie_port)) & PCIE_PM_CSR_POWER_STATE);
++ printk(KERN_INFO "Negotiated Link Width: %d\n", MS(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)), PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH));
++ printk(KERN_INFO "Number of VCs: %d\n", IFX_REG_R32(PCIE_PVC1(pcie_port)) & PCIE_PVC1_EXT_VC_CNT);
++ printk(KERN_INFO "Low-priority VCs: %d\n", MS(IFX_REG_R32(PCIE_PVC1(pcie_port)), PCIE_PVC1_LOW_PRI_EXT_VC_CNT));
++ printk(KERN_INFO "VC Arbitration: 0x%08x\n", IFX_REG_R32(PCIE_PVC2(pcie_port)) & PCIE_PVC2_VC_ARB_WRR);
++ printk(KERN_INFO "Port Arbitration: 0x%08x\n", IFX_REG_R32(PCIE_VC0_RC(pcie_port)) & PCIE_VC0_RC_PORT_ARB);
++
++ if (ifx_pcie_link_up(pcie_port)) {
++ printk(KERN_INFO "PCIe PHY Link is UP\n");
++ }
++ else {
++ printk(KERN_INFO "PCIe PHY Link is DOWN!\n");
++ }
++ if ((IFX_REG_R32(PCIE_RC_DR(pcie_port)) & PCIE_RC_DR_DLL_UP)) {
++ printk(KERN_INFO "PCIe DLL is UP\n");
++ }
++ else {
++ printk(KERN_INFO "PCIe DLL is DOWN!\n");
++ }
++
++ if ((IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_DLL_ACTIVE)) {
++ printk(KERN_INFO "PCIE_LCTLSTS in DL_Active state!\n");
++ }
++ else {
++ printk(KERN_INFO "PCIE_LCTLSTS NOT in DL_Active state!\n");
++ }
++ }
++#endif /* IFX_PCIE_DBG */
++
++/* XXX, this function is not needed in fact */
++static INLINE void
++pcie_mem_io_setup(int pcie_port)
++{
++ u32 reg;
++ /*
++ * BAR[0:1] readonly register
++ * RC contains only minimal BARs for packets mapped to this device
++ * Mem/IO filters defines a range of memory occupied by memory mapped IO devices that
++ * reside on the downstream side fo the bridge.
++ */
++ reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_MBML_MEM_LIMIT_ADDR)
++ | SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_MBML_MEM_BASE_ADDR);
++
++ IFX_REG_W32(reg, PCIE_MBML(pcie_port));
++
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_MBML: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_MBML(pcie_port)));
++
++#ifdef IFX_PCIE_PREFETCH_MEM_64BIT
++ reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_PMBL_END_ADDR)
++ | SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_PMBL_UPPER_12BIT)
++ | PCIE_PMBL_64BIT_ADDR;
++ IFX_REG_W32(reg, PCIE_PMBL(pcie_port));
++
++ /* Must configure upper 32bit */
++ IFX_REG_W32(0, PCIE_PMBU32(pcie_port));
++ IFX_REG_W32(0, PCIE_PMLU32(pcie_port));
++#else
++ /* PCIe_PBML, same as MBML */
++ IFX_REG_W32(IFX_REG_R32(PCIE_MBML(pcie_port)), PCIE_PMBL(pcie_port));
++#endif
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_PMBL: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_PMBL(pcie_port)));
++
++ /* IO Address Range */
++ reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 12), PCIE_IOBLSECS_IO_LIMIT_ADDR)
++ | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 12), PCIE_IOBLSECS_IO_BASE_ADDR);
++#ifdef IFX_PCIE_IO_32BIT
++ reg |= PCIE_IOBLSECS_32BIT_IO_ADDR;
++#endif /* IFX_PCIE_IO_32BIT */
++ IFX_REG_W32(reg, PCIE_IOBLSECS(pcie_port));
++
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_IOBLSECS: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_IOBLSECS(pcie_port)));
++#ifdef IFX_PCIE_IO_32BIT
++ reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT)
++ | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_BASE);
++ IFX_REG_W32(reg, PCIE_IO_BANDL(pcie_port));
++
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_IO_BANDL: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_IO_BANDL(pcie_port)));
++#endif /* IFX_PCIE_IO_32BIT */
++}
++
++static INLINE void
++pcie_msi_setup(int pcie_port)
++{
++ u32 reg;
++
++ /* XXX, MSI stuff should only apply to EP */
++ /* MSI Capability: Only enable 32-bit addresses */
++ reg = IFX_REG_R32(PCIE_MCAPR(pcie_port));
++ reg &= ~PCIE_MCAPR_ADDR64_CAP;
++
++ reg |= PCIE_MCAPR_MSI_ENABLE;
++
++ /* Disable multiple message */
++ reg &= ~(PCIE_MCAPR_MULTI_MSG_CAP | PCIE_MCAPR_MULTI_MSG_ENABLE);
++ IFX_REG_W32(reg, PCIE_MCAPR(pcie_port));
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_MCAPR: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_MCAPR(pcie_port)));
++}
++
++static INLINE void
++pcie_pm_setup(int pcie_port)
++{
++ u32 reg;
++
++ /* Enable PME, Soft reset enabled */
++ reg = IFX_REG_R32(PCIE_PM_CSR(pcie_port));
++ reg |= PCIE_PM_CSR_PME_ENABLE | PCIE_PM_CSR_SW_RST;
++ IFX_REG_W32(reg, PCIE_PM_CSR(pcie_port));
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_PM_CSR: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_PM_CSR(pcie_port)));
++}
++
++static INLINE void
++pcie_bus_setup(int pcie_port)
++{
++ u32 reg;
++
++ reg = SM(0, PCIE_BNR_PRIMARY_BUS_NUM) | SM(1, PCIE_PNR_SECONDARY_BUS_NUM) | SM(0xFF, PCIE_PNR_SUB_BUS_NUM);
++ IFX_REG_W32(reg, PCIE_BNR(pcie_port));
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_BNR: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_BNR(pcie_port)));
++}
++
++static INLINE void
++pcie_device_setup(int pcie_port)
++{
++ u32 reg;
++
++ /* Device capability register, set up Maximum payload size */
++ reg = IFX_REG_R32(PCIE_DCAP(pcie_port));
++ reg |= PCIE_DCAP_ROLE_BASE_ERR_REPORT;
++ reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCAP_MAX_PAYLOAD_SIZE);
++
++ /* Only available for EP */
++ reg &= ~(PCIE_DCAP_EP_L0S_LATENCY | PCIE_DCAP_EP_L1_LATENCY);
++ IFX_REG_W32(reg, PCIE_DCAP(pcie_port));
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_DCAP: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_DCAP(pcie_port)));
++
++ /* Device control and status register */
++ /* Set Maximum Read Request size for the device as a Requestor */
++ reg = IFX_REG_R32(PCIE_DCTLSTS(pcie_port));
++
++ /*
++ * Request size can be larger than the MPS used, but the completions returned
++ * for the read will be bounded by the MPS size.
++ * In our system, Max request size depends on AHB burst size. It is 64 bytes.
++ * but we set it as 128 as minimum one.
++ */
++ reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_READ_SIZE)
++ | SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_PAYLOAD_SIZE);
++
++ /* Enable relaxed ordering, no snoop, and all kinds of errors */
++ reg |= PCIE_DCTLSTS_RELAXED_ORDERING_EN | PCIE_DCTLSTS_ERR_EN | PCIE_DCTLSTS_NO_SNOOP_EN;
++
++ IFX_REG_W32(reg, PCIE_DCTLSTS(pcie_port));
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_DCTLSTS: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_DCTLSTS(pcie_port)));
++}
++
++static INLINE void
++pcie_link_setup(int pcie_port)
++{
++ u32 reg;
++
++ /*
++ * XXX, Link capability register, bit 18 for EP CLKREQ# dynamic clock management for L1, L2/3 CPM
++ * L0s is reported during link training via TS1 order set by N_FTS
++ */
++ reg = IFX_REG_R32(PCIE_LCAP(pcie_port));
++ reg &= ~PCIE_LCAP_L0S_EIXT_LATENCY;
++ reg |= SM(3, PCIE_LCAP_L0S_EIXT_LATENCY);
++ IFX_REG_W32(reg, PCIE_LCAP(pcie_port));
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_LCAP: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_LCAP(pcie_port)));
++
++ /* Link control and status register */
++ reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port));
++
++ /* Link Enable, ASPM enabled */
++ reg &= ~PCIE_LCTLSTS_LINK_DISABLE;
++
++#ifdef CONFIG_PCIEASPM
++ /*
++ * We use the same physical reference clock that the platform provides on the connector
++ * It paved the way for ASPM to calculate the new exit Latency
++ */
++ reg |= PCIE_LCTLSTS_SLOT_CLK_CFG;
++ reg |= PCIE_LCTLSTS_COM_CLK_CFG;
++ /*
++ * We should disable ASPM by default except that we have dedicated power management support
++ * Enable ASPM will cause the system hangup/instability, performance degration
++ */
++ reg |= PCIE_LCTLSTS_ASPM_ENABLE;
++#else
++ reg &= ~PCIE_LCTLSTS_ASPM_ENABLE;
++#endif /* CONFIG_PCIEASPM */
++
++ /*
++ * The maximum size of any completion with data packet is bounded by the MPS setting
++ * in device control register
++ */
++
++ /* RCB may cause multiple split transactions, two options available, we use 64 byte RCB */
++ reg &= ~ PCIE_LCTLSTS_RCB128;
++
++ IFX_REG_W32(reg, PCIE_LCTLSTS(pcie_port));
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_LCTLSTS: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_LCTLSTS(pcie_port)));
++}
++
++static INLINE void
++pcie_error_setup(int pcie_port)
++{
++ u32 reg;
++
++ /*
++ * Forward ERR_COR, ERR_NONFATAL, ERR_FATAL to the backbone
++ * Poisoned write TLPs and completions indicating poisoned TLPs will set the PCIe_PCICMDSTS.MDPE
++ */
++ reg = IFX_REG_R32(PCIE_INTRBCTRL(pcie_port));
++ reg |= PCIE_INTRBCTRL_SERR_ENABLE | PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE;
++
++ IFX_REG_W32(reg, PCIE_INTRBCTRL(pcie_port));
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_INTRBCTRL: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_INTRBCTRL(pcie_port)));
++
++ /* Uncorrectable Error Mask Register, Unmask <enable> all bits in PCIE_UESR */
++ reg = IFX_REG_R32(PCIE_UEMR(pcie_port));
++ reg &= ~PCIE_ALL_UNCORRECTABLE_ERR;
++ IFX_REG_W32(reg, PCIE_UEMR(pcie_port));
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_UEMR: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_UEMR(pcie_port)));
++
++ /* Uncorrectable Error Severity Register, ALL errors are FATAL */
++ IFX_REG_W32(PCIE_ALL_UNCORRECTABLE_ERR, PCIE_UESR(pcie_port));
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_UESR: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_UESR(pcie_port)));
++
++ /* Correctable Error Mask Register, unmask <enable> all bits */
++ reg = IFX_REG_R32(PCIE_CEMR(pcie_port));
++ reg &= ~PCIE_CORRECTABLE_ERR;
++ IFX_REG_W32(reg, PCIE_CEMR(pcie_port));
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_CEMR: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_CEMR(pcie_port)));
++
++ /* Advanced Error Capabilities and Control Registr */
++ reg = IFX_REG_R32(PCIE_AECCR(pcie_port));
++ reg |= PCIE_AECCR_ECRC_CHECK_EN | PCIE_AECCR_ECRC_GEN_EN;
++ IFX_REG_W32(reg, PCIE_AECCR(pcie_port));
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_AECCR: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_AECCR(pcie_port)));
++
++ /* Root Error Command Register, Report all types of errors */
++ reg = IFX_REG_R32(PCIE_RECR(pcie_port));
++ reg |= PCIE_RECR_ERR_REPORT_EN;
++ IFX_REG_W32(reg, PCIE_RECR(pcie_port));
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_RECR: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_RECR(pcie_port)));
++
++ /* Clear the Root status register */
++ reg = IFX_REG_R32(PCIE_RESR(pcie_port));
++ IFX_REG_W32(reg, PCIE_RESR(pcie_port));
++}
++
++static INLINE void
++pcie_root_setup(int pcie_port)
++{
++ u32 reg;
++
++ /* Root control and capabilities register */
++ reg = IFX_REG_R32(PCIE_RCTLCAP(pcie_port));
++ reg |= PCIE_RCTLCAP_SERR_ENABLE | PCIE_RCTLCAP_PME_INT_EN;
++ IFX_REG_W32(reg, PCIE_RCTLCAP(pcie_port));
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_RCTLCAP: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_RCTLCAP(pcie_port)));
++}
++
++static INLINE void
++pcie_vc_setup(int pcie_port)
++{
++ u32 reg;
++
++ /* Port VC Capability Register 2 */
++ reg = IFX_REG_R32(PCIE_PVC2(pcie_port));
++ reg &= ~PCIE_PVC2_VC_ARB_WRR;
++ reg |= PCIE_PVC2_VC_ARB_16P_FIXED_WRR;
++ IFX_REG_W32(reg, PCIE_PVC2(pcie_port));
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_PVC2: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_PVC2(pcie_port)));
++
++ /* VC0 Resource Capability Register */
++ reg = IFX_REG_R32(PCIE_VC0_RC(pcie_port));
++ reg &= ~PCIE_VC0_RC_REJECT_SNOOP;
++ IFX_REG_W32(reg, PCIE_VC0_RC(pcie_port));
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_VC0_RC: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_VC0_RC(pcie_port)));
++}
++
++static INLINE void
++pcie_port_logic_setup(int pcie_port)
++{
++ u32 reg;
++
++ /* FTS number, default 12, increase to 63, may increase time from/to L0s to L0 */
++ reg = IFX_REG_R32(PCIE_AFR(pcie_port));
++ reg &= ~(PCIE_AFR_FTS_NUM | PCIE_AFR_COM_FTS_NUM);
++ reg |= SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_FTS_NUM)
++ | SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_COM_FTS_NUM);
++ /* L0s and L1 entry latency */
++ reg &= ~(PCIE_AFR_L0S_ENTRY_LATENCY | PCIE_AFR_L1_ENTRY_LATENCY);
++ reg |= SM(PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L0S_ENTRY_LATENCY)
++ | SM(PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L1_ENTRY_LATENCY);
++ IFX_REG_W32(reg, PCIE_AFR(pcie_port));
++
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_AFR: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_AFR(pcie_port)));
++
++ /* Port Link Control Register */
++ reg = IFX_REG_R32(PCIE_PLCR(pcie_port));
++ reg |= PCIE_PLCR_DLL_LINK_EN; /* Enable the DLL link */
++ IFX_REG_W32(reg, PCIE_PLCR(pcie_port));
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_PLCR: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_PLCR(pcie_port)));
++
++ /* Lane Skew Register */
++ reg = IFX_REG_R32(PCIE_LSR(pcie_port));
++ /* Enable ACK/NACK and FC */
++ reg &= ~(PCIE_LSR_ACKNAK_DISABLE | PCIE_LSR_FC_DISABLE);
++ IFX_REG_W32(reg, PCIE_LSR(pcie_port));
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_LSR: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_LSR(pcie_port)));
++
++ /* Symbol Timer Register and Filter Mask Register 1 */
++ reg = IFX_REG_R32(PCIE_STRFMR(pcie_port));
++
++ /* Default SKP interval is very accurate already, 5us */
++ /* Enable IO/CFG transaction */
++ reg |= PCIE_STRFMR_RX_CFG_TRANS_ENABLE | PCIE_STRFMR_RX_IO_TRANS_ENABLE;
++ /* Disable FC WDT */
++ reg &= ~PCIE_STRFMR_FC_WDT_DISABLE;
++ IFX_REG_W32(reg, PCIE_STRFMR(pcie_port));
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_STRFMR: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_STRFMR(pcie_port)));
++
++ /* Filter Masker Register 2 */
++ reg = IFX_REG_R32(PCIE_FMR2(pcie_port));
++ reg |= PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 | PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1;
++ IFX_REG_W32(reg, PCIE_FMR2(pcie_port));
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_FMR2: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_FMR2(pcie_port)));
++
++ /* VC0 Completion Receive Queue Control Register */
++ reg = IFX_REG_R32(PCIE_VC0_CRQCR(pcie_port));
++ reg &= ~PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE;
++ reg |= SM(PCIE_VC0_TLP_QUEUE_MODE_BYPASS, PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE);
++ IFX_REG_W32(reg, PCIE_VC0_CRQCR(pcie_port));
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_VC0_CRQCR: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_VC0_CRQCR(pcie_port)));
++}
++
++static INLINE void
++pcie_rc_cfg_reg_setup(int pcie_port)
++{
++ pcie_ltssm_disable(pcie_port);
++ pcie_mem_io_setup(pcie_port);
++ pcie_msi_setup(pcie_port);
++ pcie_pm_setup(pcie_port);
++ pcie_bus_setup(pcie_port);
++ pcie_device_setup(pcie_port);
++ pcie_link_setup(pcie_port);
++ pcie_error_setup(pcie_port);
++ pcie_root_setup(pcie_port);
++ pcie_vc_setup(pcie_port);
++ pcie_port_logic_setup(pcie_port);
++}
++
++static int
++ifx_pcie_wait_phy_link_up(int pcie_port)
++{
++#define IFX_PCIE_PHY_LINK_UP_TIMEOUT 1000 /* XXX, tunable */
++ int i;
++
++ /* Wait for PHY link is up */
++ for (i = 0; i < IFX_PCIE_PHY_LINK_UP_TIMEOUT; i++) {
++ if (ifx_pcie_link_up(pcie_port)) {
++ break;
++ }
++ udelay(100);
++ }
++ if (i >= IFX_PCIE_PHY_LINK_UP_TIMEOUT) {
++ printk(KERN_ERR "%s timeout\n", __func__);
++ return -1;
++ }
++
++ /* Check data link up or not */
++ if (!(IFX_REG_R32(PCIE_RC_DR(pcie_port)) & PCIE_RC_DR_DLL_UP)) {
++ printk(KERN_ERR "%s DLL link is still down\n", __func__);
++ return -1;
++ }
++
++ /* Check Data link active or not */
++ if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_DLL_ACTIVE)) {
++ printk(KERN_ERR "%s DLL is not active\n", __func__);
++ return -1;
++ }
++ return 0;
++#undef IFX_PCIE_PHY_LINK_UP_TIMEOUT
++}
++
++static INLINE int
++pcie_app_loigc_setup(int pcie_port)
++{
++#ifdef IFX_PCIE_PHY_DBG
++ pcie_disable_scrambling(pcie_port);
++#endif /* IFX_PCIE_PHY_DBG */
++ pcie_ahb_bus_error_suppress(pcie_port);
++
++ /* Pull PCIe EP out of reset */
++ pcie_device_rst_deassert(pcie_port);
++
++ /* Start LTSSM training between RC and EP */
++ pcie_ltssm_enable(pcie_port);
++
++ /* Check PHY status after enabling LTSSM */
++ if (ifx_pcie_wait_phy_link_up(pcie_port) != 0) {
++ return -1;
++ }
++ return 0;
++}
++
++/*
++ * Must be done after ltssm due to based on negotiated link
++ * width and payload size
++ * Update the Replay Time Limit. Empirically, some PCIe
++ * devices take a little longer to respond than expected under
++ * load. As a workaround for this we configure the Replay Time
++ * Limit to the value expected for a 512 byte MPS instead of
++ * our actual 128 byte MPS. The numbers below are directly
++ * from the PCIe spec table 3-4/5.
++ */
++static INLINE void
++pcie_replay_time_update(int pcie_port)
++{
++ u32 reg;
++ int nlw;
++ int rtl;
++
++ reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port));
++
++ nlw = MS(reg, PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH);
++ switch (nlw) {
++ case PCIE_MAX_LENGTH_WIDTH_X1:
++ rtl = 1677;
++ break;
++ case PCIE_MAX_LENGTH_WIDTH_X2:
++ rtl = 867;
++ break;
++ case PCIE_MAX_LENGTH_WIDTH_X4:
++ rtl = 462;
++ break;
++ case PCIE_MAX_LENGTH_WIDTH_X8:
++ rtl = 258;
++ break;
++ default:
++ rtl = 1677;
++ break;
++ }
++ reg = IFX_REG_R32(PCIE_ALTRT(pcie_port));
++ reg &= ~PCIE_ALTRT_REPLAY_TIME_LIMIT;
++ reg |= SM(rtl, PCIE_ALTRT_REPLAY_TIME_LIMIT);
++ IFX_REG_W32(reg, PCIE_ALTRT(pcie_port));
++
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_ALTRT 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_ALTRT(pcie_port)));
++}
++
++/*
++ * Table 359 Enhanced Configuration Address Mapping1)
++ * 1) This table is defined in Table 7-1, page 341, PCI Express Base Specification v1.1
++ * Memory Address PCI Express Configuration Space
++ * A[(20+n-1):20] Bus Number 1 < n < 8
++ * A[19:15] Device Number
++ * A[14:12] Function Number
++ * A[11:8] Extended Register Number
++ * A[7:2] Register Number
++ * A[1:0] Along with size of the access, used to generate Byte Enables
++ * For VR9, only the address bits [22:0] are mapped to the configuration space:
++ * . Address bits [22:20] select the target bus (1-of-8)1)
++ * . Address bits [19:15] select the target device (1-of-32) on the bus
++ * . Address bits [14:12] select the target function (1-of-8) within the device.
++ * . Address bits [11:2] selects the target dword (1-of-1024) within the selected function.s configuration space
++ * . Address bits [1:0] define the start byte location within the selected dword.
++ */
++static inline u32
++pcie_bus_addr(u8 bus_num, u16 devfn, int where)
++{
++ u32 addr;
++ u8 bus;
++
++ if (!bus_num) {
++ /* type 0 */
++ addr = ((PCI_SLOT(devfn) & 0x1F) << 15) | ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF)& ~3);
++ }
++ else {
++ bus = bus_num;
++ /* type 1, only support 8 buses */
++ addr = ((bus & 0x7) << 20) | ((PCI_SLOT(devfn) & 0x1F) << 15) |
++ ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF) & ~3);
++ }
++ IFX_PCIE_PRINT(PCIE_MSG_CFG, "%s: bus addr : %02x:%02x.%01x/%02x, addr=%08x\n",
++ __func__, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn), where, addr);
++ return addr;
++}
++
++static int
++pcie_valid_config(int pcie_port, int bus, int dev)
++{
++ /* RC itself */
++ if ((bus == 0) && (dev == 0)) {
++ return 1;
++ }
++
++ /* No physical link */
++ if (!ifx_pcie_link_up(pcie_port)) {
++ return 0;
++ }
++
++ /* Bus zero only has RC itself
++ * XXX, check if EP will be integrated
++ */
++ if ((bus == 0) && (dev != 0)) {
++ return 0;
++ }
++
++ /* Maximum 8 buses supported for VRX */
++ if (bus > 9) {
++ return 0;
++ }
++
++ /*
++ * PCIe is PtP link, one bus only supports only one device
++ * except bus zero and PCIe switch which is virtual bus device
++ * The following two conditions really depends on the system design
++ * and attached the device.
++ * XXX, how about more new switch
++ */
++ if ((bus == 1) && (dev != 0)) {
++ return 0;
++ }
++
++ if ((bus >= 3) && (dev != 0)) {
++ return 0;
++ }
++ return 1;
++}
++
++static INLINE u32
++ifx_pcie_cfg_rd(int pcie_port, u32 reg)
++{
++ return IFX_REG_R32((volatile u32 *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg));
++}
++
++static INLINE void
++ifx_pcie_cfg_wr(int pcie_port, unsigned int reg, u32 val)
++{
++ IFX_REG_W32( val, (volatile u32 *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg));
++}
++
++static INLINE u32
++ifx_pcie_rc_cfg_rd(int pcie_port, u32 reg)
++{
++ return IFX_REG_R32((volatile u32 *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg));
++}
++
++static INLINE void
++ifx_pcie_rc_cfg_wr(int pcie_port, unsigned int reg, u32 val)
++{
++ IFX_REG_W32(val, (volatile u32 *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg));
++}
++
++u32
++ifx_pcie_bus_enum_read_hack(int where, u32 value)
++{
++ u32 tvalue = value;
++
++ if (where == PCI_PRIMARY_BUS) {
++ u8 primary, secondary, subordinate;
++
++ primary = tvalue & 0xFF;
++ secondary = (tvalue >> 8) & 0xFF;
++ subordinate = (tvalue >> 16) & 0xFF;
++ primary += pcibios_1st_host_bus_nr();
++ secondary += pcibios_1st_host_bus_nr();
++ subordinate += pcibios_1st_host_bus_nr();
++ tvalue = (tvalue & 0xFF000000) | (u32)primary | (u32)(secondary << 8) | (u32)(subordinate << 16);
++ }
++ return tvalue;
++}
++
++u32
++ifx_pcie_bus_enum_write_hack(int where, u32 value)
++{
++ u32 tvalue = value;
++
++ if (where == PCI_PRIMARY_BUS) {
++ u8 primary, secondary, subordinate;
++
++ primary = tvalue & 0xFF;
++ secondary = (tvalue >> 8) & 0xFF;
++ subordinate = (tvalue >> 16) & 0xFF;
++ if (primary > 0 && primary != 0xFF) {
++ primary -= pcibios_1st_host_bus_nr();
++ }
++
++ if (secondary > 0 && secondary != 0xFF) {
++ secondary -= pcibios_1st_host_bus_nr();
++ }
++ if (subordinate > 0 && subordinate != 0xFF) {
++ subordinate -= pcibios_1st_host_bus_nr();
++ }
++ tvalue = (tvalue & 0xFF000000) | (u32)primary | (u32)(secondary << 8) | (u32)(subordinate << 16);
++ }
++ else if (where == PCI_SUBORDINATE_BUS) {
++ u8 subordinate = tvalue & 0xFF;
++
++ subordinate = subordinate > 0 ? subordinate - pcibios_1st_host_bus_nr() : 0;
++ tvalue = subordinate;
++ }
++ return tvalue;
++}
++
++/**
++ * \fn static int ifx_pcie_read_config(struct pci_bus *bus, u32 devfn,
++ * int where, int size, u32 *value)
++ * \brief Read a value from configuration space
++ *
++ * \param[in] bus Pointer to pci bus
++ * \param[in] devfn PCI device function number
++ * \param[in] where PCI register number
++ * \param[in] size Register read size
++ * \param[out] value Pointer to return value
++ * \return PCIBIOS_BAD_REGISTER_NUMBER Invalid register number
++ * \return PCIBIOS_FUNC_NOT_SUPPORTED PCI function not supported
++ * \return PCIBIOS_DEVICE_NOT_FOUND PCI device not found
++ * \return PCIBIOS_SUCCESSFUL OK
++ * \ingroup IFX_PCIE_OS
++ */
++static int
++ifx_pcie_read_config(struct pci_bus *bus, u32 devfn,
++ int where, int size, u32 *value)
++{
++ u32 data = 0;
++ int bus_number = bus->number;
++ static const u32 mask[8] = {0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0};
++ int ret = PCIBIOS_SUCCESSFUL;
++ struct ifx_pci_controller *ctrl = bus->sysdata;
++ int pcie_port = ctrl->port;
++
++ if (unlikely(size != 1 && size != 2 && size != 4)){
++ ret = PCIBIOS_BAD_REGISTER_NUMBER;
++ goto out;
++ }
++
++ /* Make sure the address is aligned to natural boundary */
++ if (unlikely(((size - 1) & where))) {
++ ret = PCIBIOS_BAD_REGISTER_NUMBER;
++ goto out;
++ }
++
++ /*
++ * If we are second controller, we have to cheat OS so that it assume
++ * its bus number starts from 0 in host controller
++ */
++ bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port);
++
++ /*
++ * We need to force the bus number to be zero on the root
++ * bus. Linux numbers the 2nd root bus to start after all
++ * busses on root 0.
++ */
++ if (bus->parent == NULL) {
++ bus_number = 0;
++ }
++
++ /*
++ * PCIe only has a single device connected to it. It is
++ * always device ID 0. Don't bother doing reads for other
++ * device IDs on the first segment.
++ */
++ if ((bus_number == 0) && (PCI_SLOT(devfn) != 0)) {
++ ret = PCIBIOS_FUNC_NOT_SUPPORTED;
++ goto out;
++ }
++
++ if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) {
++ *value = 0xffffffff;
++ ret = PCIBIOS_DEVICE_NOT_FOUND;
++ goto out;
++ }
++
++ IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: %02x:%02x.%01x/%02x:%01d\n", __func__, bus_number,
++ PCI_SLOT(devfn), PCI_FUNC(devfn), where, size);
++
++ PCIE_IRQ_LOCK(ifx_pcie_lock);
++ if (bus_number == 0) { /* RC itself */
++ u32 t;
++
++ t = (where & ~3);
++ data = ifx_pcie_rc_cfg_rd(pcie_port, t);
++ IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: rd local cfg, offset:%08x, data:%08x\n",
++ __func__, t, data);
++ }
++ else {
++ u32 addr = pcie_bus_addr(bus_number, devfn, where);
++
++ data = ifx_pcie_cfg_rd(pcie_port, addr);
++ if (pcie_port == IFX_PCIE_PORT0) {
++ #ifdef CONFIG_IFX_PCIE_HW_SWAP
++ data = le32_to_cpu(data);
++ #endif /* CONFIG_IFX_PCIE_HW_SWAP */
++ }
++ else {
++ #ifdef CONFIG_IFX_PCIE1_HW_SWAP
++ data = le32_to_cpu(data);
++ #endif /* CONFIG_IFX_PCIE_HW_SWAP */
++ }
++ }
++ /* To get a correct PCI topology, we have to restore the bus number to OS */
++ data = ifx_pcie_bus_enum_hack(bus, devfn, where, data, pcie_port, 1);
++
++ PCIE_IRQ_UNLOCK(ifx_pcie_lock);
++ IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: read config: data=%08x raw=%08x\n",
++ __func__, (data >> (8 * (where & 3))) & mask[size & 7], data);
++
++ *value = (data >> (8 * (where & 3))) & mask[size & 7];
++out:
++ return ret;
++}
++
++static u32
++ifx_pcie_size_to_value(int where, int size, u32 data, u32 value)
++{
++ u32 shift;
++ u32 tdata = data;
++
++ switch (size) {
++ case 1:
++ shift = (where & 0x3) << 3;
++ tdata &= ~(0xffU << shift);
++ tdata |= ((value & 0xffU) << shift);
++ break;
++ case 2:
++ shift = (where & 3) << 3;
++ tdata &= ~(0xffffU << shift);
++ tdata |= ((value & 0xffffU) << shift);
++ break;
++ case 4:
++ tdata = value;
++ break;
++ }
++ return tdata;
++}
++
++/**
++ * \fn static static int ifx_pcie_write_config(struct pci_bus *bus, u32 devfn,
++ * int where, int size, u32 value)
++ * \brief Write a value to PCI configuration space
++ *
++ * \param[in] bus Pointer to pci bus
++ * \param[in] devfn PCI device function number
++ * \param[in] where PCI register number
++ * \param[in] size The register size to be written
++ * \param[in] value The valule to be written
++ * \return PCIBIOS_BAD_REGISTER_NUMBER Invalid register number
++ * \return PCIBIOS_DEVICE_NOT_FOUND PCI device not found
++ * \return PCIBIOS_SUCCESSFUL OK
++ * \ingroup IFX_PCIE_OS
++ */
++static int
++ifx_pcie_write_config(struct pci_bus *bus, u32 devfn,
++ int where, int size, u32 value)
++{
++ int bus_number = bus->number;
++ int ret = PCIBIOS_SUCCESSFUL;
++ struct ifx_pci_controller *ctrl = bus->sysdata;
++ int pcie_port = ctrl->port;
++ u32 tvalue = value;
++ u32 data;
++
++ /* Make sure the address is aligned to natural boundary */
++ if (unlikely(((size - 1) & where))) {
++ ret = PCIBIOS_BAD_REGISTER_NUMBER;
++ goto out;
++ }
++ /*
++ * If we are second controller, we have to cheat OS so that it assume
++ * its bus number starts from 0 in host controller
++ */
++ bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port);
++
++ /*
++ * We need to force the bus number to be zero on the root
++ * bus. Linux numbers the 2nd root bus to start after all
++ * busses on root 0.
++ */
++ if (bus->parent == NULL) {
++ bus_number = 0;
++ }
++
++ if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) {
++ ret = PCIBIOS_DEVICE_NOT_FOUND;
++ goto out;
++ }
++
++ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: %02x:%02x.%01x/%02x:%01d value=%08x\n", __func__,
++ bus_number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, value);
++
++ /* XXX, some PCIe device may need some delay */
++ PCIE_IRQ_LOCK(ifx_pcie_lock);
++
++ /*
++ * To configure the correct bus topology using native way, we have to cheat Os so that
++ * it can configure the PCIe hardware correctly.
++ */
++ tvalue = ifx_pcie_bus_enum_hack(bus, devfn, where, value, pcie_port, 0);
++
++ if (bus_number == 0) { /* RC itself */
++ u32 t;
++
++ t = (where & ~3);
++ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr local cfg, offset:%08x, fill:%08x\n", __func__, t, value);
++ data = ifx_pcie_rc_cfg_rd(pcie_port, t);
++ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd local cfg, offset:%08x, data:%08x\n", __func__, t, data);
++
++ data = ifx_pcie_size_to_value(where, size, data, tvalue);
++
++ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr local cfg, offset:%08x, value:%08x\n", __func__, t, data);
++ ifx_pcie_rc_cfg_wr(pcie_port, t, data);
++ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd local cfg, offset:%08x, value:%08x\n",
++ __func__, t, ifx_pcie_rc_cfg_rd(pcie_port, t));
++ }
++ else {
++ u32 addr = pcie_bus_addr(bus_number, devfn, where);
++
++ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr cfg, offset:%08x, fill:%08x\n", __func__, addr, value);
++ data = ifx_pcie_cfg_rd(pcie_port, addr);
++ if (pcie_port == IFX_PCIE_PORT0) {
++ #ifdef CONFIG_IFX_PCIE_HW_SWAP
++ data = le32_to_cpu(data);
++ #endif /* CONFIG_IFX_PCIE_HW_SWAP */
++ }
++ else {
++ #ifdef CONFIG_IFX_PCIE1_HW_SWAP
++ data = le32_to_cpu(data);
++ #endif /* CONFIG_IFX_PCIE_HW_SWAP */
++ }
++ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd cfg, offset:%08x, data:%08x\n", __func__, addr, data);
++
++ data = ifx_pcie_size_to_value(where, size, data, tvalue);
++ if (pcie_port == IFX_PCIE_PORT0) {
++ #ifdef CONFIG_IFX_PCIE_HW_SWAP
++ data = cpu_to_le32(data);
++ #endif /* CONFIG_IFX_PCIE_HW_SWAP */
++ }
++ else {
++ #ifdef CONFIG_IFX_PCIE1_HW_SWAP
++ data = cpu_to_le32(data);
++ #endif /* CONFIG_IFX_PCIE_HW_SWAP */
++ }
++ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: wr cfg, offset:%08x, value:%08x\n", __func__, addr, data);
++ ifx_pcie_cfg_wr(pcie_port, addr, data);
++ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: rd cfg, offset:%08x, value:%08x\n",
++ __func__, addr, ifx_pcie_cfg_rd(pcie_port, addr));
++ }
++ PCIE_IRQ_UNLOCK(ifx_pcie_lock);
++out:
++ return ret;
++}
++
++static struct resource ifx_pcie_io_resource = {
++ .name = "PCIe0 I/O space",
++ .start = PCIE_IO_PHY_BASE,
++ .end = PCIE_IO_PHY_END,
++ .flags = IORESOURCE_IO,
++};
++
++static struct resource ifx_pcie_mem_resource = {
++ .name = "PCIe0 Memory space",
++ .start = PCIE_MEM_PHY_BASE,
++ .end = PCIE_MEM_PHY_END,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct pci_ops ifx_pcie_ops = {
++ .read = ifx_pcie_read_config,
++ .write = ifx_pcie_write_config,
++};
++
++#ifdef CONFIG_IFX_PCIE_2ND_CORE
++static struct resource ifx_pcie1_io_resource = {
++ .name = "PCIe1 I/O space",
++ .start = PCIE1_IO_PHY_BASE,
++ .end = PCIE1_IO_PHY_END,
++ .flags = IORESOURCE_IO,
++};
++
++static struct resource ifx_pcie1_mem_resource = {
++ .name = "PCIe1 Memory space",
++ .start = PCIE1_MEM_PHY_BASE,
++ .end = PCIE1_MEM_PHY_END,
++ .flags = IORESOURCE_MEM,
++};
++#endif /* CONFIG_IFX_PCIE_2ND_CORE */
++
++static struct ifx_pci_controller ifx_pcie_controller[IFX_PCIE_CORE_NR] = {
++ {
++ .pcic = {
++ .pci_ops = &ifx_pcie_ops,
++ .mem_resource = &ifx_pcie_mem_resource,
++ .io_resource = &ifx_pcie_io_resource,
++ },
++ .port = IFX_PCIE_PORT0,
++ },
++#ifdef CONFIG_IFX_PCIE_2ND_CORE
++ {
++ .pcic = {
++ .pci_ops = &ifx_pcie_ops,
++ .mem_resource = &ifx_pcie1_mem_resource,
++ .io_resource = &ifx_pcie1_io_resource,
++ },
++ .port = IFX_PCIE_PORT1,
++ },
++#endif /* CONFIG_IFX_PCIE_2ND_CORE */
++};
++
++#ifdef IFX_PCIE_ERROR_INT
++static INLINE void
++pcie_core_int_clear_all(int pcie_port)
++{
++ u32 reg;
++
++ reg = IFX_REG_R32(PCIE_IRNCR(pcie_port));
++ IFX_PCIE_PRINT(PCIE_MSG_ISR, "%s PCIE_IRNCR: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_IRNCR(pcie_port)));
++ reg &= PCIE_RC_CORE_COMBINED_INT;
++ IFX_REG_W32(reg, PCIE_IRNCR(pcie_port));
++}
++
++static irqreturn_t
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19)
++pcie_rc_core_isr(int irq, void *dev_id)
++#else
++pcie_rc_core_isr(int irq, void *dev_id, struct pt_regs *regs)
++#endif
++{
++ struct ifx_pci_controller *ctrl = (struct ifx_pci_controller *)dev_id;
++ int pcie_port = ctrl->port;
++
++ IFX_PCIE_PRINT(PCIE_MSG_ISR, "PCIe RC error intr %d\n", irq);
++ pcie_core_int_clear_all(pcie_port);
++ return IRQ_HANDLED;
++}
++
++static int
++pcie_rc_core_int_init(int pcie_port)
++{
++ int ret;
++
++ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s enter \n", __func__);
++
++ /* Enable core interrupt */
++ IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNEN(pcie_port));
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_IRNEN: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_IRNEN(pcie_port)));
++
++ /* Clear it first */
++ IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNCR(pcie_port));
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_IRNCR: 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_IRNCR(pcie_port)));
++ ret = request_irq(pcie_irqs[pcie_port].ir_irq.irq, pcie_rc_core_isr, IRQF_DISABLED,
++ pcie_irqs[pcie_port].ir_irq.name, &ifx_pcie_controller[pcie_port]);
++ if (ret) {
++ printk(KERN_ERR "%s request irq %d failed\n", __func__, IFX_PCIE_IR);
++ }
++ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s exit \n", __func__);
++
++ return ret;
++}
++#endif /* IFX_PCIE_ERROR_INT */
++
++/**
++ * \fn int ifx_pcie_bios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++ * \brief Map a PCI device to the appropriate interrupt line
++ *
++ * \param[in] dev The Linux PCI device structure for the device to map
++ * \param[in] slot The slot number for this device on __BUS 0__. Linux
++ * enumerates through all the bridges and figures out the
++ * slot on Bus 0 where this device eventually hooks to.
++ * \param[in] pin The PCI interrupt pin read from the device, then swizzled
++ * as it goes through each bridge.
++ * \return Interrupt number for the device
++ * \ingroup IFX_PCIE_OS
++ */
++int
++ifx_pcie_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin)
++{
++ u32 irq_bit = 0;
++ int irq = 0;
++ struct ifx_pci_controller *ctrl = dev->bus->sysdata;
++ int pcie_port = ctrl->port;
++
++ printk("%s port %d dev %s slot %d pin %d \n", __func__, pcie_port, pci_name(dev), slot, pin);
++
++ if ((pin == PCIE_LEGACY_DISABLE) || (pin > PCIE_LEGACY_INT_MAX)) {
++ printk(KERN_WARNING "WARNING: dev %s: invalid interrupt pin %d\n", pci_name(dev), pin);
++ return -1;
++ }
++ /* Pin index so minus one */
++ irq_bit = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq_bit;
++ irq = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq;
++ IFX_REG_SET_BIT(irq_bit, PCIE_IRNEN(pcie_port));
++// printk("%s PCIE_IRNEN: 0x%08x\n", __func__, IFX_REG_R32(PCIE_IRNEN(pcie_port)));
++ IFX_REG_SET_BIT(irq_bit, PCIE_IRNCR(pcie_port));
++ // printk("%s PCIE_IRNCR: 0x%08x\n", __func__, IFX_REG_R32(PCIE_IRNCR(pcie_port)));
++ printk("%s dev %s irq %d assigned\n", __func__, pci_name(dev), irq);
++// printk("%s dev %s: exit\n", __func__, pci_name(dev));
++ return irq;
++}
++
++/**
++ * \fn int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev)
++ * \brief Called to perform platform specific PCI setup
++ *
++ * \param[in] dev The Linux PCI device structure for the device to map
++ * \return OK
++ * \ingroup IFX_PCIE_OS
++ */
++int
++ifx_pcie_bios_plat_dev_init(struct pci_dev *dev)
++{
++ u16 config;
++#ifdef IFX_PCIE_ERROR_INT
++ u32 dconfig;
++ int pos;
++#endif /* IFX_PCIE_ERROR_INT */
++
++ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s enter \n", __func__);
++ /* Enable reporting System errors and parity errors on all devices */
++ /* Enable parity checking and error reporting */
++ pci_read_config_word(dev, PCI_COMMAND, &config);
++ config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR /*| PCI_COMMAND_INVALIDATE |
++ PCI_COMMAND_FAST_BACK*/;
++ pci_write_config_word(dev, PCI_COMMAND, config);
++
++ if (dev->subordinate) {
++ /* Set latency timers on sub bridges */
++ pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 0x40); /* XXX, */
++ /* More bridge error detection */
++ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
++ config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
++ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
++ }
++#ifdef IFX_PCIE_ERROR_INT
++ /* Enable the PCIe normal error reporting */
++ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
++ if (pos) {
++
++ /* Disable system error generation in response to error messages */
++ pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &config);
++ config &= ~(PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE | PCI_EXP_RTCTL_SEFEE);
++ pci_write_config_word(dev, pos + PCI_EXP_RTCTL, config);
++
++ /* Clear PCIE Capability's Device Status */
++ pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &config);
++ pci_write_config_word(dev, pos + PCI_EXP_DEVSTA, config);
++
++ /* Update Device Control */
++ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
++ /* Correctable Error Reporting */
++ config |= PCI_EXP_DEVCTL_CERE;
++ /* Non-Fatal Error Reporting */
++ config |= PCI_EXP_DEVCTL_NFERE;
++ /* Fatal Error Reporting */
++ config |= PCI_EXP_DEVCTL_FERE;
++ /* Unsupported Request */
++ config |= PCI_EXP_DEVCTL_URRE;
++ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
++ }
++
++ /* Find the Advanced Error Reporting capability */
++ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
++ if (pos) {
++ /* Clear Uncorrectable Error Status */
++ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &dconfig);
++ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, dconfig);
++ /* Enable reporting of all uncorrectable errors */
++ /* Uncorrectable Error Mask - turned on bits disable errors */
++ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
++ /*
++ * Leave severity at HW default. This only controls if
++ * errors are reported as uncorrectable or
++ * correctable, not if the error is reported.
++ */
++ /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
++ /* Clear Correctable Error Status */
++ pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
++ pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
++ /* Enable reporting of all correctable errors */
++ /* Correctable Error Mask - turned on bits disable errors */
++ pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
++ /* Advanced Error Capabilities */
++ pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
++ /* ECRC Generation Enable */
++ if (dconfig & PCI_ERR_CAP_ECRC_GENC) {
++ dconfig |= PCI_ERR_CAP_ECRC_GENE;
++ }
++ /* ECRC Check Enable */
++ if (dconfig & PCI_ERR_CAP_ECRC_CHKC) {
++ dconfig |= PCI_ERR_CAP_ECRC_CHKE;
++ }
++ pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
++
++ /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
++ /* Enable Root Port's interrupt in response to error messages */
++ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
++ PCI_ERR_ROOT_CMD_COR_EN |
++ PCI_ERR_ROOT_CMD_NONFATAL_EN |
++ PCI_ERR_ROOT_CMD_FATAL_EN);
++ /* Clear the Root status register */
++ pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
++ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
++ }
++#endif /* IFX_PCIE_ERROR_INT */
++ /* WAR, only 128 MRRS is supported, force all EPs to support this value */
++ pcie_set_readrq(dev, 128);
++ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s exit \n", __func__);
++ return 0;
++}
++
++static void
++pcie_phy_rst(int pcie_port)
++{
++ pcie_phy_rst_assert(pcie_port);
++ pcie_phy_rst_deassert(pcie_port);
++
++ /* Make sure PHY PLL is stable */
++ udelay(20);
++}
++
++static int
++pcie_rc_initialize(int pcie_port)
++{
++ int i;
++#define IFX_PCIE_PHY_LOOP_CNT 5
++
++ pcie_rcu_endian_setup(pcie_port);
++
++ pcie_ep_gpio_rst_init(pcie_port);
++
++ /*
++ * XXX, PCIe elastic buffer bug will cause not to be detected. One more
++ * reset PCIe PHY will solve this issue
++ */
++ for (i = 0; i < IFX_PCIE_PHY_LOOP_CNT; i++) {
++ /* Disable PCIe PHY Analog part for sanity check */
++ pcie_phy_pmu_disable(pcie_port);
++
++ pcie_phy_rst(pcie_port);
++
++ /* PCIe Core reset enabled, low active, sw programmed */
++ pcie_core_rst_assert(pcie_port);
++
++ /* Put PCIe EP in reset status */
++ pcie_device_rst_assert(pcie_port);
++
++ /* PCI PHY & Core reset disabled, high active, sw programmed */
++ pcie_core_rst_deassert(pcie_port);
++
++ /* Already in a quiet state, program PLL, enable PHY, check ready bit */
++ pcie_phy_clock_mode_setup(pcie_port);
++
++ /* Enable PCIe PHY and Clock */
++ pcie_core_pmu_setup(pcie_port);
++
++ /* Clear status registers */
++ pcie_status_register_clear(pcie_port);
++
++ #ifdef CONFIG_PCI_MSI
++ pcie_msi_init(pcie_port);
++ #endif /* CONFIG_PCI_MSI */
++ pcie_rc_cfg_reg_setup(pcie_port);
++
++ /* Once link is up, break out */
++ if (pcie_app_loigc_setup(pcie_port) == 0) {
++ break;
++ }
++ }
++ if (i >= IFX_PCIE_PHY_LOOP_CNT) {
++ printk(KERN_ERR "%s link up failed!!!!!\n", __func__);
++ return -EIO;
++ }
++ /* NB, don't increase ACK/NACK timer timeout value, which will cause a lot of COR errors */
++ pcie_replay_time_update(pcie_port);
++#ifdef IFX_PCIE_DBG
++ pcie_post_dump(pcie_port);
++ pcie_status_registers_dump(pcie_port);
++#endif /* IFX_PCIE_DBG */
++ return 0;
++}
++
++static int inline
++ifx_pcie_startup_port_nr(void)
++{
++ int pcie_port = IFX_PCIE_PORT0;
++
++#if defined (CONFIG_IFX_PCIE_1ST_CORE) && defined (CONFIG_IFX_PCIE_2ND_CORE)
++ pcie_port = IFX_PCIE_PORT0;
++#elif defined (CONFIG_IFX_PCIE_1ST_CORE)
++ pcie_port = IFX_PCIE_PORT0;
++#elif defined (CONFIG_IFX_PCIE_2ND_CORE)
++ pcie_port = IFX_PCIE_PORT1;
++#else
++ #error "Please choose valid PCIe Core"
++#endif
++ return pcie_port;
++}
++
++/**
++ * \fn static int __init ifx_pcie_bios_init(void)
++ * \brief Initialize the IFX PCIe controllers
++ *
++ * \return -EIO PCIe PHY link is not up
++ * \return -ENOMEM Configuration/IO space failed to map
++ * \return 0 OK
++ * \ingroup IFX_PCIE_OS
++ */
++extern int (*ltq_pci_plat_arch_init)(struct pci_dev *dev);
++extern int (*ltq_pci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin);
++
++static int __init
++ifx_pcie_bios_init(void)
++{
++ char ver_str[128] = {0};
++ void __iomem *io_map_base;
++ int pcie_port;
++ int startup_port;
++
++ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s enter \n", __func__);
++
++ ltq_pci_map_irq = ifx_pcie_bios_map_irq;
++ ltq_pci_plat_arch_init = ifx_pcie_bios_plat_dev_init;
++
++ /* Enable AHB Master/ Slave */
++ pcie_ahb_pmu_setup();
++
++ startup_port = ifx_pcie_startup_port_nr();
++
++ for (pcie_port = startup_port; pcie_port < IFX_PCIE_CORE_NR; pcie_port++){
++ if (pcie_rc_initialize(pcie_port) == 0) {
++ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: ifx_pcie_cfg_base 0x%p\n",
++ __func__, PCIE_CFG_PORT_TO_BASE(pcie_port));
++ /* Otherwise, warning will pop up */
++ io_map_base = ioremap(PCIE_IO_PHY_PORT_TO_BASE(pcie_port), PCIE_IO_SIZE);
++ if (io_map_base == NULL) {
++ IFX_PCIE_PRINT(PCIE_MSG_ERR, "%s io space ioremap failed\n", __func__);
++ return -ENOMEM;
++ }
++ ifx_pcie_controller[pcie_port].pcic.io_map_base = (unsigned long)io_map_base;
++
++ register_pci_controller(&ifx_pcie_controller[pcie_port].pcic);
++ /* XXX, clear error status */
++
++ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: mem_resource 0x%p, io_resource 0x%p\n",
++ __func__, &ifx_pcie_controller[pcie_port].pcic.mem_resource,
++ &ifx_pcie_controller[pcie_port].pcic.io_resource);
++
++ #ifdef IFX_PCIE_ERROR_INT
++ pcie_rc_core_int_init(pcie_port);
++ #endif /* IFX_PCIE_ERROR_INT */
++ }
++ }
++#ifdef CONFIG_IFX_PMCU
++ ifx_pcie_pmcu_init();
++#endif /* CONFIG_IFX_PMCU */
++
++ sprintf(ver_str, "PCIe Root Complex %d.%d.%d", IFX_PCIE_VER_MAJOR, IFX_PCIE_VER_MID, IFX_PCIE_VER_MINOR);
++ printk(KERN_INFO "%s", ver_str);
++ return 0;
++#undef IFX_PCIE_PHY_LOOP_CNT
++}
++arch_initcall(ifx_pcie_bios_init);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Chuanhua.Lei@infineon.com");
++MODULE_SUPPORTED_DEVICE("Infineon builtin PCIe RC module");
++MODULE_DESCRIPTION("Infineon builtin PCIe RC driver");
++
+diff --git a/arch/mips/pci/ifxmips_pcie.h b/arch/mips/pci/ifxmips_pcie.h
+new file mode 100644
+index 0000000..c6f92f5
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie.h
+@@ -0,0 +1,135 @@
++/******************************************************************************
++**
++** FILE NAME : ifxmips_pcie.h
++** PROJECT : IFX UEIP for VRX200
++** MODULES : PCIe module
++**
++** DATE : 02 Mar 2009
++** AUTHOR : Lei Chuanhua
++** DESCRIPTION : PCIe Root Complex Driver
++** COPYRIGHT : Copyright (c) 2009
++** Infineon Technologies AG
++** Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++** This program is free software; you can redistribute it and/or modify
++** it under the terms of the GNU General Public License as published by
++** the Free Software Foundation; either version 2 of the License, or
++** (at your option) any later version.
++** HISTORY
++** $Version $Date $Author $Comment
++** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version
++*******************************************************************************/
++#ifndef IFXMIPS_PCIE_H
++#define IFXMIPS_PCIE_H
++#include <linux/version.h>
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/interrupt.h>
++#include "ifxmips_pci_common.h"
++#include "ifxmips_pcie_reg.h"
++
++/*!
++ \defgroup IFX_PCIE PCI Express bus driver module
++ \brief PCI Express IP module support VRX200
++*/
++
++/*!
++ \defgroup IFX_PCIE_OS OS APIs
++ \ingroup IFX_PCIE
++ \brief PCIe bus driver OS interface functions
++*/
++
++/*!
++ \file ifxmips_pcie.h
++ \ingroup IFX_PCIE
++ \brief header file for PCIe module common header file
++*/
++#define PCIE_IRQ_LOCK(lock) do { \
++ unsigned long flags; \
++ spin_lock_irqsave(&(lock), flags);
++#define PCIE_IRQ_UNLOCK(lock) \
++ spin_unlock_irqrestore(&(lock), flags); \
++} while (0)
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)
++#define IRQF_SHARED SA_SHIRQ
++#endif
++
++#define PCIE_MSG_MSI 0x00000001
++#define PCIE_MSG_ISR 0x00000002
++#define PCIE_MSG_FIXUP 0x00000004
++#define PCIE_MSG_READ_CFG 0x00000008
++#define PCIE_MSG_WRITE_CFG 0x00000010
++#define PCIE_MSG_CFG (PCIE_MSG_READ_CFG | PCIE_MSG_WRITE_CFG)
++#define PCIE_MSG_REG 0x00000020
++#define PCIE_MSG_INIT 0x00000040
++#define PCIE_MSG_ERR 0x00000080
++#define PCIE_MSG_PHY 0x00000100
++#define PCIE_MSG_ANY 0x000001ff
++
++#define IFX_PCIE_PORT0 0
++#define IFX_PCIE_PORT1 1
++
++#ifdef CONFIG_IFX_PCIE_2ND_CORE
++#define IFX_PCIE_CORE_NR 2
++#else
++#define IFX_PCIE_CORE_NR 1
++#endif
++
++#define IFX_PCIE_ERROR_INT
++
++//#define IFX_PCIE_DBG
++
++#if defined(IFX_PCIE_DBG)
++#define IFX_PCIE_PRINT(_m, _fmt, args...) do { \
++ ifx_pcie_debug((_fmt), ##args); \
++} while (0)
++
++#define INLINE
++#else
++#define IFX_PCIE_PRINT(_m, _fmt, args...) \
++ do {} while(0)
++#define INLINE inline
++#endif
++
++struct ifx_pci_controller {
++ struct pci_controller pcic;
++
++ /* RC specific, per host bus information */
++ u32 port; /* Port index, 0 -- 1st core, 1 -- 2nd core */
++};
++
++typedef struct ifx_pcie_ir_irq {
++ const unsigned int irq;
++ const char name[16];
++}ifx_pcie_ir_irq_t;
++
++typedef struct ifx_pcie_legacy_irq{
++ const u32 irq_bit;
++ const int irq;
++}ifx_pcie_legacy_irq_t;
++
++typedef struct ifx_pcie_irq {
++ ifx_pcie_ir_irq_t ir_irq;
++ ifx_pcie_legacy_irq_t legacy_irq[PCIE_LEGACY_INT_MAX];
++}ifx_pcie_irq_t;
++
++extern u32 g_pcie_debug_flag;
++extern void ifx_pcie_debug(const char *fmt, ...);
++extern void pcie_phy_clock_mode_setup(int pcie_port);
++extern void pcie_msi_pic_init(int pcie_port);
++extern u32 ifx_pcie_bus_enum_read_hack(int where, u32 value);
++extern u32 ifx_pcie_bus_enum_write_hack(int where, u32 value);
++
++#define CONFIG_VR9
++
++#ifdef CONFIG_VR9
++#include "ifxmips_pcie_vr9.h"
++#elif defined (CONFIG_AR10)
++#include "ifxmips_pcie_ar10.h"
++#else
++#error "PCIE: platform not defined"
++#endif /* CONFIG_VR9 */
++
++#endif /* IFXMIPS_PCIE_H */
++
+diff --git a/arch/mips/pci/ifxmips_pcie_ar10.h b/arch/mips/pci/ifxmips_pcie_ar10.h
+new file mode 100644
+index 0000000..99ff463
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie_ar10.h
+@@ -0,0 +1,290 @@
++/****************************************************************************
++ Copyright (c) 2010
++ Lantiq Deutschland GmbH
++ Am Campeon 3; 85579 Neubiberg, Germany
++
++ For licensing information, see the file 'LICENSE' in the root folder of
++ this software module.
++
++ *****************************************************************************/
++/*!
++ \file ifxmips_pcie_ar10.h
++ \ingroup IFX_PCIE
++ \brief PCIe RC driver ar10 specific file
++*/
++
++#ifndef IFXMIPS_PCIE_AR10_H
++#define IFXMIPS_PCIE_AR10_H
++#ifndef AUTOCONF_INCLUDED
++#include <linux/config.h>
++#endif /* AUTOCONF_INCLUDED */
++#include <linux/types.h>
++#include <linux/delay.h>
++
++/* Project header file */
++#include <asm/ifx/ifx_types.h>
++#include <asm/ifx/ifx_pmu.h>
++#include <asm/ifx/ifx_gpio.h>
++#include <asm/ifx/ifx_ebu_led.h>
++
++static inline void pcie_ep_gpio_rst_init(int pcie_port)
++{
++ ifx_ebu_led_enable();
++ if (pcie_port == 0) {
++ ifx_ebu_led_set_data(11, 1);
++ }
++ else {
++ ifx_ebu_led_set_data(12, 1);
++ }
++}
++
++static inline void pcie_ahb_pmu_setup(void)
++{
++ /* XXX, moved to CGU to control AHBM */
++}
++
++static inline void pcie_rcu_endian_setup(int pcie_port)
++{
++ u32 reg;
++
++ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
++ /* Inbound, big endian */
++ reg |= IFX_RCU_BE_AHB4S;
++ if (pcie_port == 0) {
++ reg |= IFX_RCU_BE_PCIE0M;
++
++ #ifdef CONFIG_IFX_PCIE_HW_SWAP
++ /* Outbound, software swap needed */
++ reg |= IFX_RCU_BE_AHB3M;
++ reg &= ~IFX_RCU_BE_PCIE0S;
++ #else
++ /* Outbound little endian */
++ reg &= ~IFX_RCU_BE_AHB3M;
++ reg &= ~IFX_RCU_BE_PCIE0S;
++ #endif
++ }
++ else {
++ reg |= IFX_RCU_BE_PCIE1M;
++ #ifdef CONFIG_IFX_PCIE1_HW_SWAP
++ /* Outbound, software swap needed */
++ reg |= IFX_RCU_BE_AHB3M;
++ reg &= ~IFX_RCU_BE_PCIE1S;
++ #else
++ /* Outbound little endian */
++ reg &= ~IFX_RCU_BE_AHB3M;
++ reg &= ~IFX_RCU_BE_PCIE1S;
++ #endif
++ }
++
++ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN));
++}
++
++static inline void pcie_phy_pmu_enable(int pcie_port)
++{
++ if (pcie_port == 0) { /* XXX, should use macro*/
++ PCIE0_PHY_PMU_SETUP(IFX_PMU_ENABLE);
++ }
++ else {
++ PCIE1_PHY_PMU_SETUP(IFX_PMU_ENABLE);
++ }
++}
++
++static inline void pcie_phy_pmu_disable(int pcie_port)
++{
++ if (pcie_port == 0) { /* XXX, should use macro*/
++ PCIE0_PHY_PMU_SETUP(IFX_PMU_DISABLE);
++ }
++ else {
++ PCIE1_PHY_PMU_SETUP(IFX_PMU_DISABLE);
++ }
++}
++
++static inline void pcie_pdi_big_endian(int pcie_port)
++{
++ u32 reg;
++
++ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
++ if (pcie_port == 0) {
++ /* Config AHB->PCIe and PDI endianness */
++ reg |= IFX_RCU_BE_PCIE0_PDI;
++ }
++ else {
++ /* Config AHB->PCIe and PDI endianness */
++ reg |= IFX_RCU_BE_PCIE1_PDI;
++ }
++ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
++}
++
++static inline void pcie_pdi_pmu_enable(int pcie_port)
++{
++ if (pcie_port == 0) {
++ /* Enable PDI to access PCIe PHY register */
++ PDI0_PMU_SETUP(IFX_PMU_ENABLE);
++ }
++ else {
++ PDI1_PMU_SETUP(IFX_PMU_ENABLE);
++ }
++}
++
++static inline void pcie_core_rst_assert(int pcie_port)
++{
++ u32 reg;
++
++ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++
++ /* Reset Core, bit 22 */
++ if (pcie_port == 0) {
++ reg |= 0x00400000;
++ }
++ else {
++ reg |= 0x08000000; /* Bit 27 */
++ }
++ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_core_rst_deassert(int pcie_port)
++{
++ u32 reg;
++
++ /* Make sure one micro-second delay */
++ udelay(1);
++
++ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++ if (pcie_port == 0) {
++ reg &= ~0x00400000; /* bit 22 */
++ }
++ else {
++ reg &= ~0x08000000; /* Bit 27 */
++ }
++ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_phy_rst_assert(int pcie_port)
++{
++ u32 reg;
++
++ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++ if (pcie_port == 0) {
++ reg |= 0x00001000; /* Bit 12 */
++ }
++ else {
++ reg |= 0x00002000; /* Bit 13 */
++ }
++ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_phy_rst_deassert(int pcie_port)
++{
++ u32 reg;
++
++ /* Make sure one micro-second delay */
++ udelay(1);
++
++ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++ if (pcie_port == 0) {
++ reg &= ~0x00001000; /* Bit 12 */
++ }
++ else {
++ reg &= ~0x00002000; /* Bit 13 */
++ }
++ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_device_rst_assert(int pcie_port)
++{
++ if (pcie_port == 0) {
++ ifx_ebu_led_set_data(11, 0);
++ }
++ else {
++ ifx_ebu_led_set_data(12, 0);
++ }
++}
++
++static inline void pcie_device_rst_deassert(int pcie_port)
++{
++ mdelay(100);
++ if (pcie_port == 0) {
++ ifx_ebu_led_set_data(11, 1);
++ }
++ else {
++ ifx_ebu_led_set_data(12, 1);
++ }
++ ifx_ebu_led_disable();
++}
++
++static inline void pcie_core_pmu_setup(int pcie_port)
++{
++ if (pcie_port == 0) {
++ PCIE0_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
++ }
++ else {
++ PCIE1_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
++ }
++}
++
++static inline void pcie_msi_init(int pcie_port)
++{
++ pcie_msi_pic_init(pcie_port);
++ if (pcie_port == 0) {
++ MSI0_PMU_SETUP(IFX_PMU_ENABLE);
++ }
++ else {
++ MSI1_PMU_SETUP(IFX_PMU_ENABLE);
++ }
++}
++
++static inline u32
++ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port)
++{
++ u32 tbus_number = bus_number;
++
++#ifdef CONFIG_IFX_PCIE_2ND_CORE
++ if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */
++ if (pcibios_host_nr() > 1) {
++ tbus_number -= pcibios_1st_host_bus_nr();
++ }
++ }
++#endif /* CONFIG_IFX_PCI */
++ return tbus_number;
++}
++
++static inline u32
++ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read)
++{
++ struct pci_dev *pdev;
++ u32 tvalue = value;
++
++ /* Sanity check */
++ pdev = pci_get_slot(bus, devfn);
++ if (pdev == NULL) {
++ return tvalue;
++ }
++
++ /* Only care about PCI bridge */
++ if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
++ return tvalue;
++ }
++
++ if (read) { /* Read hack */
++ #ifdef CONFIG_IFX_PCIE_2ND_CORE
++ if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */
++ if (pcibios_host_nr() > 1) {
++ tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue);
++ }
++ }
++ #endif /* CONFIG_IFX_PCIE_2ND_CORE */
++ }
++ else { /* Write hack */
++ #ifdef CONFIG_IFX_PCIE_2ND_CORE
++ if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */
++ if (pcibios_host_nr() > 1) {
++ tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue);
++ }
++ }
++ #endif
++ }
++ return tvalue;
++}
++
++#endif /* IFXMIPS_PCIE_AR10_H */
+diff --git a/arch/mips/pci/ifxmips_pcie_msi.c b/arch/mips/pci/ifxmips_pcie_msi.c
+new file mode 100644
+index 0000000..bffd6fa
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie_msi.c
+@@ -0,0 +1,392 @@
++/******************************************************************************
++**
++** FILE NAME : ifxmips_pcie_msi.c
++** PROJECT : IFX UEIP for VRX200
++** MODULES : PCI MSI sub module
++**
++** DATE : 02 Mar 2009
++** AUTHOR : Lei Chuanhua
++** DESCRIPTION : PCIe MSI Driver
++** COPYRIGHT : Copyright (c) 2009
++** Infineon Technologies AG
++** Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++** This program is free software; you can redistribute it and/or modify
++** it under the terms of the GNU General Public License as published by
++** the Free Software Foundation; either version 2 of the License, or
++** (at your option) any later version.
++** HISTORY
++** $Date $Author $Comment
++** 02 Mar,2009 Lei Chuanhua Initial version
++*******************************************************************************/
++/*!
++ \defgroup IFX_PCIE_MSI MSI OS APIs
++ \ingroup IFX_PCIE
++ \brief PCIe bus driver OS interface functions
++*/
++
++/*!
++ \file ifxmips_pcie_msi.c
++ \ingroup IFX_PCIE
++ \brief PCIe MSI OS interface file
++*/
++
++#ifndef AUTOCONF_INCLUDED
++#include <linux/config.h>
++#endif /* AUTOCONF_INCLUDED */
++#include <linux/init.h>
++#include <linux/sched.h>
++#include <linux/slab.h>
++#include <linux/interrupt.h>
++#include <linux/kernel_stat.h>
++#include <linux/pci.h>
++#include <linux/msi.h>
++#include <linux/module.h>
++#include <asm/bootinfo.h>
++#include <asm/irq.h>
++#include <asm/traps.h>
++
++#include <asm/ifx/ifx_types.h>
++#include <asm/ifx/ifx_regs.h>
++#include <asm/ifx/common_routines.h>
++#include <asm/ifx/irq.h>
++
++#include "ifxmips_pcie_reg.h"
++#include "ifxmips_pcie.h"
++
++#define IFX_MSI_IRQ_NUM 16
++
++enum {
++ IFX_PCIE_MSI_IDX0 = 0,
++ IFX_PCIE_MSI_IDX1,
++ IFX_PCIE_MSI_IDX2,
++ IFX_PCIE_MSI_IDX3,
++};
++
++typedef struct ifx_msi_irq_idx {
++ const int irq;
++ const int idx;
++}ifx_msi_irq_idx_t;
++
++struct ifx_msi_pic {
++ volatile u32 pic_table[IFX_MSI_IRQ_NUM];
++ volatile u32 pic_endian; /* 0x40 */
++};
++typedef struct ifx_msi_pic *ifx_msi_pic_t;
++
++typedef struct ifx_msi_irq {
++ const volatile ifx_msi_pic_t msi_pic_p;
++ const u32 msi_phy_base;
++ const ifx_msi_irq_idx_t msi_irq_idx[IFX_MSI_IRQ_NUM];
++ /*
++ * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is
++ * in use.
++ */
++ u16 msi_free_irq_bitmask;
++
++ /*
++ * Each bit in msi_multiple_irq_bitmask tells that the device using
++ * this bit in msi_free_irq_bitmask is also using the next bit. This
++ * is used so we can disable all of the MSI interrupts when a device
++ * uses multiple.
++ */
++ u16 msi_multiple_irq_bitmask;
++}ifx_msi_irq_t;
++
++static ifx_msi_irq_t msi_irqs[IFX_PCIE_CORE_NR] = {
++ {
++ .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI_PIC_REG_BASE,
++ .msi_phy_base = PCIE_MSI_PHY_BASE,
++ .msi_irq_idx = {
++ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
++ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
++ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
++ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
++ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
++ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
++ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
++ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
++ },
++ .msi_free_irq_bitmask = 0,
++ .msi_multiple_irq_bitmask= 0,
++ },
++#ifdef CONFIG_IFX_PCIE_2ND_CORE
++ {
++ .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI1_PIC_REG_BASE,
++ .msi_phy_base = PCIE1_MSI_PHY_BASE,
++ .msi_irq_idx = {
++ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
++ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
++ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
++ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
++ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
++ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
++ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
++ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
++ },
++ .msi_free_irq_bitmask = 0,
++ .msi_multiple_irq_bitmask= 0,
++
++ },
++#endif /* CONFIG_IFX_PCIE_2ND_CORE */
++};
++
++/*
++ * This lock controls updates to msi_free_irq_bitmask,
++ * msi_multiple_irq_bitmask and pic register settting
++ */
++static DEFINE_SPINLOCK(ifx_pcie_msi_lock);
++
++void pcie_msi_pic_init(int pcie_port)
++{
++ spin_lock(&ifx_pcie_msi_lock);
++ msi_irqs[pcie_port].msi_pic_p->pic_endian = IFX_MSI_PIC_BIG_ENDIAN;
++ spin_unlock(&ifx_pcie_msi_lock);
++}
++
++/**
++ * \fn int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
++ * \brief Called when a driver request MSI interrupts instead of the
++ * legacy INT A-D. This routine will allocate multiple interrupts
++ * for MSI devices that support them. A device can override this by
++ * programming the MSI control bits [6:4] before calling
++ * pci_enable_msi().
++ *
++ * \param[in] pdev Device requesting MSI interrupts
++ * \param[in] desc MSI descriptor
++ *
++ * \return -EINVAL Invalid pcie root port or invalid msi bit
++ * \return 0 OK
++ * \ingroup IFX_PCIE_MSI
++ */
++int
++arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
++{
++ int irq, pos;
++ u16 control;
++ int irq_idx;
++ int irq_step;
++ int configured_private_bits;
++ int request_private_bits;
++ struct msi_msg msg;
++ u16 search_mask;
++ struct ifx_pci_controller *ctrl = pdev->bus->sysdata;
++ int pcie_port = ctrl->port;
++
++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s %s enter\n", __func__, pci_name(pdev));
++
++ /* XXX, skip RC MSI itself */
++ if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) {
++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s RC itself doesn't use MSI interrupt\n", __func__);
++ return -EINVAL;
++ }
++
++ /*
++ * Read the MSI config to figure out how many IRQs this device
++ * wants. Most devices only want 1, which will give
++ * configured_private_bits and request_private_bits equal 0.
++ */
++ pci_read_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, &control);
++
++ /*
++ * If the number of private bits has been configured then use
++ * that value instead of the requested number. This gives the
++ * driver the chance to override the number of interrupts
++ * before calling pci_enable_msi().
++ */
++ configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4;
++ if (configured_private_bits == 0) {
++ /* Nothing is configured, so use the hardware requested size */
++ request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1;
++ }
++ else {
++ /*
++ * Use the number of configured bits, assuming the
++ * driver wanted to override the hardware request
++ * value.
++ */
++ request_private_bits = configured_private_bits;
++ }
++
++ /*
++ * The PCI 2.3 spec mandates that there are at most 32
++ * interrupts. If this device asks for more, only give it one.
++ */
++ if (request_private_bits > 5) {
++ request_private_bits = 0;
++ }
++again:
++ /*
++ * The IRQs have to be aligned on a power of two based on the
++ * number being requested.
++ */
++ irq_step = (1 << request_private_bits);
++
++ /* Mask with one bit for each IRQ */
++ search_mask = (1 << irq_step) - 1;
++
++ /*
++ * We're going to search msi_free_irq_bitmask_lock for zero
++ * bits. This represents an MSI interrupt number that isn't in
++ * use.
++ */
++ spin_lock(&ifx_pcie_msi_lock);
++ for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos += irq_step) {
++ if ((msi_irqs[pcie_port].msi_free_irq_bitmask & (search_mask << pos)) == 0) {
++ msi_irqs[pcie_port].msi_free_irq_bitmask |= search_mask << pos;
++ msi_irqs[pcie_port].msi_multiple_irq_bitmask |= (search_mask >> 1) << pos;
++ break;
++ }
++ }
++ spin_unlock(&ifx_pcie_msi_lock);
++
++ /* Make sure the search for available interrupts didn't fail */
++ if (pos >= IFX_MSI_IRQ_NUM) {
++ if (request_private_bits) {
++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s: Unable to find %d free "
++ "interrupts, trying just one", __func__, 1 << request_private_bits);
++ request_private_bits = 0;
++ goto again;
++ }
++ else {
++ printk(KERN_ERR "%s: Unable to find a free MSI interrupt\n", __func__);
++ return -EINVAL;
++ }
++ }
++ irq = msi_irqs[pcie_port].msi_irq_idx[pos].irq;
++ irq_idx = msi_irqs[pcie_port].msi_irq_idx[pos].idx;
++
++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "pos %d, irq %d irq_idx %d\n", pos, irq, irq_idx);
++
++ /*
++ * Initialize MSI. This has to match the memory-write endianess from the device
++ * Address bits [23:12]
++ */
++ spin_lock(&ifx_pcie_msi_lock);
++ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] = SM(irq_idx, IFX_MSI_PIC_INT_LINE) |
++ SM((msi_irqs[pcie_port].msi_phy_base >> 12), IFX_MSI_PIC_MSG_ADDR) |
++ SM((1 << pos), IFX_MSI_PIC_MSG_DATA);
++
++ /* Enable this entry */
++ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~IFX_MSI_PCI_INT_DISABLE;
++ spin_unlock(&ifx_pcie_msi_lock);
++
++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "pic_table[%d]: 0x%08x\n",
++ pos, msi_irqs[pcie_port].msi_pic_p->pic_table[pos]);
++
++ /* Update the number of IRQs the device has available to it */
++ control &= ~PCI_MSI_FLAGS_QSIZE;
++ control |= (request_private_bits << 4);
++ pci_write_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, control);
++
++ set_irq_msi(irq, desc);
++ msg.address_hi = 0x0;
++ msg.address_lo = msi_irqs[pcie_port].msi_phy_base;
++ msg.data = SM((1 << pos), IFX_MSI_PIC_MSG_DATA);
++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "msi_data: pos %d 0x%08x\n", pos, msg.data);
++
++ write_msi_msg(irq, &msg);
++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__);
++ return 0;
++}
++
++static int
++pcie_msi_irq_to_port(unsigned int irq, int *port)
++{
++ int ret = 0;
++
++ if (irq == IFX_PCIE_MSI_IR0 || irq == IFX_PCIE_MSI_IR1 ||
++ irq == IFX_PCIE_MSI_IR2 || irq == IFX_PCIE_MSI_IR3) {
++ *port = IFX_PCIE_PORT0;
++ }
++#ifdef CONFIG_IFX_PCIE_2ND_CORE
++ else if (irq == IFX_PCIE1_MSI_IR0 || irq == IFX_PCIE1_MSI_IR1 ||
++ irq == IFX_PCIE1_MSI_IR2 || irq == IFX_PCIE1_MSI_IR3) {
++ *port = IFX_PCIE_PORT1;
++ }
++#endif /* CONFIG_IFX_PCIE_2ND_CORE */
++ else {
++ printk(KERN_ERR "%s: Attempted to teardown illegal "
++ "MSI interrupt (%d)\n", __func__, irq);
++ ret = -EINVAL;
++ }
++ return ret;
++}
++
++/**
++ * \fn void arch_teardown_msi_irq(unsigned int irq)
++ * \brief Called when a device no longer needs its MSI interrupts. All
++ * MSI interrupts for the device are freed.
++ *
++ * \param irq The devices first irq number. There may be multple in sequence.
++ * \return none
++ * \ingroup IFX_PCIE_MSI
++ */
++void
++arch_teardown_msi_irq(unsigned int irq)
++{
++ int pos;
++ int number_irqs;
++ u16 bitmask;
++ int pcie_port;
++
++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s enter\n", __func__);
++
++ BUG_ON(irq > INT_NUM_IM4_IRL31);
++
++ if (pcie_msi_irq_to_port(irq, &pcie_port) != 0) {
++ return;
++ }
++
++ /* Shift the mask to the correct bit location, not always correct
++ * Probally, the first match will be chosen.
++ */
++ for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos++) {
++ if ((msi_irqs[pcie_port].msi_irq_idx[pos].irq == irq)
++ && (msi_irqs[pcie_port].msi_free_irq_bitmask & ( 1 << pos))) {
++ break;
++ }
++ }
++ if (pos >= IFX_MSI_IRQ_NUM) {
++ printk(KERN_ERR "%s: Unable to find a matched MSI interrupt\n", __func__);
++ return;
++ }
++ spin_lock(&ifx_pcie_msi_lock);
++ /* Disable this entry */
++ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] |= IFX_MSI_PCI_INT_DISABLE;
++ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~(IFX_MSI_PIC_INT_LINE | IFX_MSI_PIC_MSG_ADDR | IFX_MSI_PIC_MSG_DATA);
++ spin_unlock(&ifx_pcie_msi_lock);
++ /*
++ * Count the number of IRQs we need to free by looking at the
++ * msi_multiple_irq_bitmask. Each bit set means that the next
++ * IRQ is also owned by this device.
++ */
++ number_irqs = 0;
++ while (((pos + number_irqs) < IFX_MSI_IRQ_NUM) &&
++ (msi_irqs[pcie_port].msi_multiple_irq_bitmask & (1 << (pos + number_irqs)))) {
++ number_irqs++;
++ }
++ number_irqs++;
++
++ /* Mask with one bit for each IRQ */
++ bitmask = (1 << number_irqs) - 1;
++
++ bitmask <<= pos;
++ if ((msi_irqs[pcie_port].msi_free_irq_bitmask & bitmask) != bitmask) {
++ printk(KERN_ERR "%s: Attempted to teardown MSI "
++ "interrupt (%d) not in use\n", __func__, irq);
++ return;
++ }
++ /* Checks are done, update the in use bitmask */
++ spin_lock(&ifx_pcie_msi_lock);
++ msi_irqs[pcie_port].msi_free_irq_bitmask &= ~bitmask;
++ msi_irqs[pcie_port].msi_multiple_irq_bitmask &= ~(bitmask >> 1);
++ spin_unlock(&ifx_pcie_msi_lock);
++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__);
++}
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Chuanhua.Lei@infineon.com");
++MODULE_SUPPORTED_DEVICE("Infineon PCIe IP builtin MSI PIC module");
++MODULE_DESCRIPTION("Infineon PCIe IP builtin MSI PIC driver");
++
+diff --git a/arch/mips/pci/ifxmips_pcie_phy.c b/arch/mips/pci/ifxmips_pcie_phy.c
+new file mode 100644
+index 0000000..f5b0f13
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie_phy.c
+@@ -0,0 +1,478 @@
++/******************************************************************************
++**
++** FILE NAME : ifxmips_pcie_phy.c
++** PROJECT : IFX UEIP for VRX200
++** MODULES : PCIe PHY sub module
++**
++** DATE : 14 May 2009
++** AUTHOR : Lei Chuanhua
++** DESCRIPTION : PCIe Root Complex Driver
++** COPYRIGHT : Copyright (c) 2009
++** Infineon Technologies AG
++** Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++** This program is free software; you can redistribute it and/or modify
++** it under the terms of the GNU General Public License as published by
++** the Free Software Foundation; either version 2 of the License, or
++** (at your option) any later version.
++** HISTORY
++** $Version $Date $Author $Comment
++** 0.0.1 14 May,2009 Lei Chuanhua Initial version
++*******************************************************************************/
++/*!
++ \file ifxmips_pcie_phy.c
++ \ingroup IFX_PCIE
++ \brief PCIe PHY PLL register programming source file
++*/
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <asm/paccess.h>
++#include <linux/delay.h>
++
++#include "ifxmips_pcie_reg.h"
++#include "ifxmips_pcie.h"
++
++/* PCIe PDI only supports 16 bit operation */
++
++#define IFX_PCIE_PHY_REG_WRITE16(__addr, __data) \
++ ((*(volatile u16 *) (__addr)) = (__data))
++
++#define IFX_PCIE_PHY_REG_READ16(__addr) \
++ (*(volatile u16 *) (__addr))
++
++#define IFX_PCIE_PHY_REG16(__addr) \
++ (*(volatile u16 *) (__addr))
++
++#define IFX_PCIE_PHY_REG(__reg, __value, __mask) do { \
++ u16 read_data; \
++ u16 write_data; \
++ read_data = IFX_PCIE_PHY_REG_READ16((__reg)); \
++ write_data = (read_data & ((u16)~(__mask))) | (((u16)(__value)) & ((u16)(__mask)));\
++ IFX_PCIE_PHY_REG_WRITE16((__reg), write_data); \
++} while (0)
++
++#define IFX_PCIE_PLL_TIMEOUT 1000 /* Tunnable */
++
++//#define IFX_PCI_PHY_REG_DUMP
++
++#ifdef IFX_PCI_PHY_REG_DUMP
++static void
++pcie_phy_reg_dump(int pcie_port)
++{
++ printk("PLL REGFILE\n");
++ printk("PCIE_PHY_PLL_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL1(pcie_port)));
++ printk("PCIE_PHY_PLL_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL2(pcie_port)));
++ printk("PCIE_PHY_PLL_CTRL3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL3(pcie_port)));
++ printk("PCIE_PHY_PLL_CTRL4 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL4(pcie_port)));
++ printk("PCIE_PHY_PLL_CTRL5 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL5(pcie_port)));
++ printk("PCIE_PHY_PLL_CTRL6 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL6(pcie_port)));
++ printk("PCIE_PHY_PLL_CTRL7 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL7(pcie_port)));
++ printk("PCIE_PHY_PLL_A_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL1(pcie_port)));
++ printk("PCIE_PHY_PLL_A_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL2(pcie_port)));
++ printk("PCIE_PHY_PLL_A_CTRL3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL3(pcie_port)));
++ printk("PCIE_PHY_PLL_STATUS 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port)));
++
++ printk("TX1 REGFILE\n");
++ printk("PCIE_PHY_TX1_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL1(pcie_port)));
++ printk("PCIE_PHY_TX1_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL2(pcie_port)));
++ printk("PCIE_PHY_TX1_CTRL3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL3(pcie_port)));
++ printk("PCIE_PHY_TX1_A_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_A_CTRL1(pcie_port)));
++ printk("PCIE_PHY_TX1_A_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_A_CTRL2(pcie_port)));
++ printk("PCIE_PHY_TX1_MOD1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD1(pcie_port)));
++ printk("PCIE_PHY_TX1_MOD2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD2(pcie_port)));
++ printk("PCIE_PHY_TX1_MOD3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD3(pcie_port)));
++
++ printk("TX2 REGFILE\n");
++ printk("PCIE_PHY_TX2_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_CTRL1(pcie_port)));
++ printk("PCIE_PHY_TX2_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_CTRL2(pcie_port)));
++ printk("PCIE_PHY_TX2_A_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_A_CTRL1(pcie_port)));
++ printk("PCIE_PHY_TX2_A_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_A_CTRL2(pcie_port)));
++ printk("PCIE_PHY_TX2_MOD1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD1(pcie_port)));
++ printk("PCIE_PHY_TX2_MOD2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD2(pcie_port)));
++ printk("PCIE_PHY_TX2_MOD3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD3(pcie_port)));
++
++ printk("RX1 REGFILE\n");
++ printk("PCIE_PHY_RX1_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CTRL1(pcie_port)));
++ printk("PCIE_PHY_RX1_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CTRL2(pcie_port)));
++ printk("PCIE_PHY_RX1_CDR 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CDR(pcie_port)));
++ printk("PCIE_PHY_RX1_EI 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_EI(pcie_port)));
++ printk("PCIE_PHY_RX1_A_CTRL 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_A_CTRL(pcie_port)));
++}
++#endif /* IFX_PCI_PHY_REG_DUMP */
++
++static void
++pcie_phy_comm_setup(int pcie_port)
++{
++ /* PLL Setting */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF);
++
++ /* increase the bias reference voltage */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF);
++
++ /* Endcnt */
++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF);
++
++ /* force */
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008);
++
++ /* predrv_ser_en */
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF);
++
++ /* ctrl_lim */
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF);
++
++ /* ctrl */
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00);
++
++ /* predrv_ser_en */
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00);
++
++ /* RTERM*/
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF);
++
++ /* Improved 100MHz clock output */
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF);
++
++ /* Reduced CDR BW to avoid glitches */
++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF);
++}
++
++#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE
++static void
++pcie_phy_36mhz_mode_setup(int pcie_port)
++{
++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
++#ifdef IFX_PCI_PHY_REG_DUMP
++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n");
++ pcie_phy_reg_dump(pcie_port);
++#endif
++
++ /* en_ext_mmd_div_ratio */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
++
++ /* ext_mmd_div_ratio*/
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
++
++ /* pll_ensdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
++
++ /* en_const_sdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
++
++ /* mmd */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
++
++ /* lf_mode */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
++
++ /* const_sdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
++
++ /* const sdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
++
++ /* pllmod */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF);
++
++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
++}
++#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */
++
++#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE
++static void
++pcie_phy_36mhz_ssc_mode_setup(int pcie_port)
++{
++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
++#ifdef IFX_PCI_PHY_REG_DUMP
++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n");
++ pcie_phy_reg_dump(pcie_port);
++#endif
++
++ /* PLL Setting */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF);
++
++ /* Increase the bias reference voltage */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF);
++
++ /* Endcnt */
++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF);
++
++ /* Force */
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008);
++
++ /* Predrv_ser_en */
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF);
++
++ /* ctrl_lim */
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF);
++
++ /* ctrl */
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00);
++
++ /* predrv_ser_en */
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00);
++
++ /* RTERM*/
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF);
++
++ /* en_ext_mmd_div_ratio */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
++
++ /* ext_mmd_div_ratio*/
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
++
++ /* pll_ensdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0400, 0x0400);
++
++ /* en_const_sdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
++
++ /* mmd */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
++
++ /* lf_mode */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
++
++ /* const_sdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
++
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0100);
++ /* const sdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
++
++ /* pllmod */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1c72, 0xFFFF);
++
++ /* improved 100MHz clock output */
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF);
++
++ /* reduced CDR BW to avoid glitches */
++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF);
++
++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
++}
++#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE */
++
++#ifdef CONFIG_IFX_PCIE_PHY_25MHZ_MODE
++static void
++pcie_phy_25mhz_mode_setup(int pcie_port)
++{
++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
++#ifdef IFX_PCI_PHY_REG_DUMP
++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n");
++ pcie_phy_reg_dump(pcie_port);
++#endif
++ /* en_const_sdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
++
++ /* pll_ensdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0200);
++
++ /* en_ext_mmd_div_ratio*/
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0002, 0x0002);
++
++ /* ext_mmd_div_ratio*/
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0040, 0x0070);
++
++ /* mmd */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x6000, 0xe000);
++
++ /* lf_mode */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x4000, 0x4000);
++
++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
++}
++#endif /* CONFIG_IFX_PCIE_PHY_25MHZ_MODE */
++
++#ifdef CONFIG_IFX_PCIE_PHY_100MHZ_MODE
++static void
++pcie_phy_100mhz_mode_setup(int pcie_port)
++{
++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
++#ifdef IFX_PCI_PHY_REG_DUMP
++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n");
++ pcie_phy_reg_dump(pcie_port);
++#endif
++ /* en_ext_mmd_div_ratio */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
++
++ /* ext_mmd_div_ratio*/
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
++
++ /* pll_ensdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
++
++ /* en_const_sdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
++
++ /* mmd */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
++
++ /* lf_mode */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
++
++ /* const_sdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
++
++ /* const sdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
++
++ /* pllmod */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF);
++
++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
++}
++#endif /* CONFIG_IFX_PCIE_PHY_100MHZ_MODE */
++
++static int
++pcie_phy_wait_startup_ready(int pcie_port)
++{
++ int i;
++
++ for (i = 0; i < IFX_PCIE_PLL_TIMEOUT; i++) {
++ if ((IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port)) & 0x0040) != 0) {
++ break;
++ }
++ udelay(10);
++ }
++ if (i >= IFX_PCIE_PLL_TIMEOUT) {
++ printk(KERN_ERR "%s PLL Link timeout\n", __func__);
++ return -1;
++ }
++ return 0;
++}
++
++static void
++pcie_phy_load_enable(int pcie_port, int slice)
++{
++ /* Set the load_en of tx/rx slice to '1' */
++ switch (slice) {
++ case 1:
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0010, 0x0010);
++ break;
++ case 2:
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0010, 0x0010);
++ break;
++ case 3:
++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0002, 0x0002);
++ break;
++ }
++}
++
++static void
++pcie_phy_load_disable(int pcie_port, int slice)
++{
++ /* set the load_en of tx/rx slice to '0' */
++ switch (slice) {
++ case 1:
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0000, 0x0010);
++ break;
++ case 2:
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0000, 0x0010);
++ break;
++ case 3:
++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0000, 0x0002);
++ break;
++ }
++}
++
++static void
++pcie_phy_load_war(int pcie_port)
++{
++ int slice;
++
++ for (slice = 1; slice < 4; slice++) {
++ pcie_phy_load_enable(pcie_port, slice);
++ udelay(1);
++ pcie_phy_load_disable(pcie_port, slice);
++ }
++}
++
++static void
++pcie_phy_tx2_modulation(int pcie_port)
++{
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD1(pcie_port), 0x1FFE, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD2(pcie_port), 0xFFFE, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0601, 0xFFFF);
++ mdelay(1);
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0001, 0xFFFF);
++}
++
++static void
++pcie_phy_tx1_modulation(int pcie_port)
++{
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD1(pcie_port), 0x1FFE, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD2(pcie_port), 0xFFFE, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0601, 0xFFFF);
++ mdelay(1);
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0001, 0xFFFF);
++}
++
++static void
++pcie_phy_tx_modulation_war(int pcie_port)
++{
++ int i;
++
++#define PCIE_PHY_MODULATION_NUM 5
++ for (i = 0; i < PCIE_PHY_MODULATION_NUM; i++) {
++ pcie_phy_tx2_modulation(pcie_port);
++ pcie_phy_tx1_modulation(pcie_port);
++ }
++#undef PCIE_PHY_MODULATION_NUM
++}
++
++void
++pcie_phy_clock_mode_setup(int pcie_port)
++{
++ pcie_pdi_big_endian(pcie_port);
++
++ /* Enable PDI to access PCIe PHY register */
++ pcie_pdi_pmu_enable(pcie_port);
++
++ /* Configure PLL and PHY clock */
++ pcie_phy_comm_setup(pcie_port);
++
++#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE
++ pcie_phy_36mhz_mode_setup(pcie_port);
++#elif defined(CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE)
++ pcie_phy_36mhz_ssc_mode_setup(pcie_port);
++#elif defined(CONFIG_IFX_PCIE_PHY_25MHZ_MODE)
++ pcie_phy_25mhz_mode_setup(pcie_port);
++#elif defined (CONFIG_IFX_PCIE_PHY_100MHZ_MODE)
++ pcie_phy_100mhz_mode_setup(pcie_port);
++#else
++ #error "PCIE PHY Clock Mode must be chosen first!!!!"
++#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */
++
++ /* Enable PCIe PHY and make PLL setting take effect */
++ pcie_phy_pmu_enable(pcie_port);
++
++ /* Check if we are in startup_ready status */
++ pcie_phy_wait_startup_ready(pcie_port);
++
++ pcie_phy_load_war(pcie_port);
++
++ /* Apply TX modulation workarounds */
++ pcie_phy_tx_modulation_war(pcie_port);
++
++#ifdef IFX_PCI_PHY_REG_DUMP
++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Modified PHY register dump\n");
++ pcie_phy_reg_dump(pcie_port);
++#endif
++}
++
+diff --git a/arch/mips/pci/ifxmips_pcie_pm.c b/arch/mips/pci/ifxmips_pcie_pm.c
+new file mode 100644
+index 0000000..a10ecad
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie_pm.c
+@@ -0,0 +1,176 @@
++/******************************************************************************
++**
++** FILE NAME : ifxmips_pcie_pm.c
++** PROJECT : IFX UEIP
++** MODULES : PCIE Root Complex Driver
++**
++** DATE : 21 Dec 2009
++** AUTHOR : Lei Chuanhua
++** DESCRIPTION : PCIE Root Complex Driver Power Managment
++** COPYRIGHT : Copyright (c) 2009
++** Lantiq Deutschland GmbH
++** Am Campeon 3, 85579 Neubiberg, Germany
++**
++** This program is free software; you can redistribute it and/or modify
++** it under the terms of the GNU General Public License as published by
++** the Free Software Foundation; either version 2 of the License, or
++** (at your option) any later version.
++**
++** HISTORY
++** $Date $Author $Comment
++** 21 Dec,2009 Lei Chuanhua First UEIP release
++*******************************************************************************/
++/*!
++ \defgroup IFX_PCIE_PM Power Management functions
++ \ingroup IFX_PCIE
++ \brief IFX PCIE Root Complex Driver power management functions
++*/
++
++/*!
++ \file ifxmips_pcie_pm.c
++ \ingroup IFX_PCIE
++ \brief source file for PCIE Root Complex Driver Power Management
++*/
++
++#ifndef EXPORT_SYMTAB
++#define EXPORT_SYMTAB
++#endif
++#ifndef AUTOCONF_INCLUDED
++#include <linux/config.h>
++#endif /* AUTOCONF_INCLUDED */
++#include <linux/version.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <asm/system.h>
++
++/* Project header */
++#include <asm/ifx/ifx_types.h>
++#include <asm/ifx/ifx_regs.h>
++#include <asm/ifx/common_routines.h>
++#include <asm/ifx/ifx_pmcu.h>
++#include "ifxmips_pcie_pm.h"
++
++/**
++ * \fn static IFX_PMCU_RETURN_t ifx_pcie_pmcu_state_change(IFX_PMCU_STATE_t pmcuState)
++ * \brief the callback function to request pmcu state in the power management hardware-dependent module
++ *
++ * \param pmcuState This parameter is a PMCU state.
++ *
++ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully
++ * \return IFX_PMCU_RETURN_ERROR Failed to set power state.
++ * \return IFX_PMCU_RETURN_DENIED Not allowed to operate power state
++ * \ingroup IFX_PCIE_PM
++ */
++static IFX_PMCU_RETURN_t
++ifx_pcie_pmcu_state_change(IFX_PMCU_STATE_t pmcuState)
++{
++ switch(pmcuState)
++ {
++ case IFX_PMCU_STATE_D0:
++ return IFX_PMCU_RETURN_SUCCESS;
++ case IFX_PMCU_STATE_D1: // Not Applicable
++ return IFX_PMCU_RETURN_DENIED;
++ case IFX_PMCU_STATE_D2: // Not Applicable
++ return IFX_PMCU_RETURN_DENIED;
++ case IFX_PMCU_STATE_D3: // Module clock gating and Power gating
++ return IFX_PMCU_RETURN_SUCCESS;
++ default:
++ return IFX_PMCU_RETURN_DENIED;
++ }
++}
++
++/**
++ * \fn static IFX_PMCU_RETURN_t ifx_pcie_pmcu_state_get(IFX_PMCU_STATE_t *pmcuState)
++ * \brief the callback function to get pmcu state in the power management hardware-dependent module
++
++ * \param pmcuState Pointer to return power state.
++ *
++ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully
++ * \return IFX_PMCU_RETURN_ERROR Failed to set power state.
++ * \return IFX_PMCU_RETURN_DENIED Not allowed to operate power state
++ * \ingroup IFX_PCIE_PM
++ */
++static IFX_PMCU_RETURN_t
++ifx_pcie_pmcu_state_get(IFX_PMCU_STATE_t *pmcuState)
++{
++ return IFX_PMCU_RETURN_SUCCESS;
++}
++
++/**
++ * \fn IFX_PMCU_RETURN_t ifx_pcie_pmcu_prechange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState)
++ * \brief Apply all callbacks registered to be executed before a state change for pmcuModule
++ *
++ * \param pmcuModule Module
++ * \param newState New state
++ * \param oldState Old state
++ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully
++ * \return IFX_PMCU_RETURN_ERROR Failed to set power state.
++ * \ingroup IFX_PCIE_PM
++ */
++static IFX_PMCU_RETURN_t
++ifx_pcie_pmcu_prechange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState)
++{
++ return IFX_PMCU_RETURN_SUCCESS;
++}
++
++/**
++ * \fn IFX_PMCU_RETURN_t ifx_pcie_pmcu_postchange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState)
++ * \brief Apply all callbacks registered to be executed before a state change for pmcuModule
++ *
++ * \param pmcuModule Module
++ * \param newState New state
++ * \param oldState Old state
++ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully
++ * \return IFX_PMCU_RETURN_ERROR Failed to set power state.
++ * \ingroup IFX_PCIE_PM
++ */
++static IFX_PMCU_RETURN_t
++ifx_pcie_pmcu_postchange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState)
++{
++ return IFX_PMCU_RETURN_SUCCESS;
++}
++
++/**
++ * \fn static void ifx_pcie_pmcu_init(void)
++ * \brief Register with central PMCU module
++ * \return none
++ * \ingroup IFX_PCIE_PM
++ */
++void
++ifx_pcie_pmcu_init(void)
++{
++ IFX_PMCU_REGISTER_t pmcuRegister;
++
++ /* XXX, hook driver context */
++
++ /* State function register */
++ memset(&pmcuRegister, 0, sizeof(IFX_PMCU_REGISTER_t));
++ pmcuRegister.pmcuModule = IFX_PMCU_MODULE_PCIE;
++ pmcuRegister.pmcuModuleNr = 0;
++ pmcuRegister.ifx_pmcu_state_change = ifx_pcie_pmcu_state_change;
++ pmcuRegister.ifx_pmcu_state_get = ifx_pcie_pmcu_state_get;
++ pmcuRegister.pre = ifx_pcie_pmcu_prechange;
++ pmcuRegister.post= ifx_pcie_pmcu_postchange;
++ ifx_pmcu_register(&pmcuRegister);
++}
++
++/**
++ * \fn static void ifx_pcie_pmcu_exit(void)
++ * \brief Unregister with central PMCU module
++ *
++ * \return none
++ * \ingroup IFX_PCIE_PM
++ */
++void
++ifx_pcie_pmcu_exit(void)
++{
++ IFX_PMCU_REGISTER_t pmcuUnRegister;
++
++ /* XXX, hook driver context */
++
++ pmcuUnRegister.pmcuModule = IFX_PMCU_MODULE_PCIE;
++ pmcuUnRegister.pmcuModuleNr = 0;
++ ifx_pmcu_unregister(&pmcuUnRegister);
++}
++
+diff --git a/arch/mips/pci/ifxmips_pcie_pm.h b/arch/mips/pci/ifxmips_pcie_pm.h
+new file mode 100644
+index 0000000..6ece20d
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie_pm.h
+@@ -0,0 +1,36 @@
++/******************************************************************************
++**
++** FILE NAME : ifxmips_pcie_pm.h
++** PROJECT : IFX UEIP
++** MODULES : PCIe Root Complex Driver
++**
++** DATE : 21 Dec 2009
++** AUTHOR : Lei Chuanhua
++** DESCRIPTION : PCIe Root Complex Driver Power Managment
++** COPYRIGHT : Copyright (c) 2009
++** Lantiq Deutschland GmbH
++** Am Campeon 3, 85579 Neubiberg, Germany
++**
++** This program is free software; you can redistribute it and/or modify
++** it under the terms of the GNU General Public License as published by
++** the Free Software Foundation; either version 2 of the License, or
++** (at your option) any later version.
++**
++** HISTORY
++** $Date $Author $Comment
++** 21 Dec,2009 Lei Chuanhua First UEIP release
++*******************************************************************************/
++/*!
++ \file ifxmips_pcie_pm.h
++ \ingroup IFX_PCIE
++ \brief header file for PCIe Root Complex Driver Power Management
++*/
++
++#ifndef IFXMIPS_PCIE_PM_H
++#define IFXMIPS_PCIE_PM_H
++
++void ifx_pcie_pmcu_init(void);
++void ifx_pcie_pmcu_exit(void);
++
++#endif /* IFXMIPS_PCIE_PM_H */
++
+diff --git a/arch/mips/pci/ifxmips_pcie_reg.h b/arch/mips/pci/ifxmips_pcie_reg.h
+new file mode 100644
+index 0000000..e7e4b6c
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie_reg.h
+@@ -0,0 +1,1001 @@
++/******************************************************************************
++**
++** FILE NAME : ifxmips_pcie_reg.h
++** PROJECT : IFX UEIP for VRX200
++** MODULES : PCIe module
++**
++** DATE : 02 Mar 2009
++** AUTHOR : Lei Chuanhua
++** DESCRIPTION : PCIe Root Complex Driver
++** COPYRIGHT : Copyright (c) 2009
++** Infineon Technologies AG
++** Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++** This program is free software; you can redistribute it and/or modify
++** it under the terms of the GNU General Public License as published by
++** the Free Software Foundation; either version 2 of the License, or
++** (at your option) any later version.
++** HISTORY
++** $Version $Date $Author $Comment
++** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version
++*******************************************************************************/
++#ifndef IFXMIPS_PCIE_REG_H
++#define IFXMIPS_PCIE_REG_H
++/*!
++ \file ifxmips_pcie_reg.h
++ \ingroup IFX_PCIE
++ \brief header file for PCIe module register definition
++*/
++/* PCIe Address Mapping Base */
++#define PCIE_CFG_PHY_BASE 0x1D000000UL
++#define PCIE_CFG_BASE (KSEG1 + PCIE_CFG_PHY_BASE)
++#define PCIE_CFG_SIZE (8 * 1024 * 1024)
++
++#define PCIE_MEM_PHY_BASE 0x1C000000UL
++#define PCIE_MEM_BASE (KSEG1 + PCIE_MEM_PHY_BASE)
++#define PCIE_MEM_SIZE (16 * 1024 * 1024)
++#define PCIE_MEM_PHY_END (PCIE_MEM_PHY_BASE + PCIE_MEM_SIZE - 1)
++
++#define PCIE_IO_PHY_BASE 0x1D800000UL
++#define PCIE_IO_BASE (KSEG1 + PCIE_IO_PHY_BASE)
++#define PCIE_IO_SIZE (1 * 1024 * 1024)
++#define PCIE_IO_PHY_END (PCIE_IO_PHY_BASE + PCIE_IO_SIZE - 1)
++
++#define PCIE_RC_CFG_BASE (KSEG1 + 0x1D900000)
++#define PCIE_APP_LOGIC_REG (KSEG1 + 0x1E100900)
++#define PCIE_MSI_PHY_BASE 0x1F600000UL
++
++#define PCIE_PDI_PHY_BASE 0x1F106800UL
++#define PCIE_PDI_BASE (KSEG1 + PCIE_PDI_PHY_BASE)
++#define PCIE_PDI_SIZE 0x400
++
++#define PCIE1_CFG_PHY_BASE 0x19000000UL
++#define PCIE1_CFG_BASE (KSEG1 + PCIE1_CFG_PHY_BASE)
++#define PCIE1_CFG_SIZE (8 * 1024 * 1024)
++
++#define PCIE1_MEM_PHY_BASE 0x18000000UL
++#define PCIE1_MEM_BASE (KSEG1 + PCIE1_MEM_PHY_BASE)
++#define PCIE1_MEM_SIZE (16 * 1024 * 1024)
++#define PCIE1_MEM_PHY_END (PCIE1_MEM_PHY_BASE + PCIE1_MEM_SIZE - 1)
++
++#define PCIE1_IO_PHY_BASE 0x19800000UL
++#define PCIE1_IO_BASE (KSEG1 + PCIE1_IO_PHY_BASE)
++#define PCIE1_IO_SIZE (1 * 1024 * 1024)
++#define PCIE1_IO_PHY_END (PCIE1_IO_PHY_BASE + PCIE1_IO_SIZE - 1)
++
++#define PCIE1_RC_CFG_BASE (KSEG1 + 0x19900000)
++#define PCIE1_APP_LOGIC_REG (KSEG1 + 0x1E100700)
++#define PCIE1_MSI_PHY_BASE 0x1F400000UL
++
++#define PCIE1_PDI_PHY_BASE 0x1F700400UL
++#define PCIE1_PDI_BASE (KSEG1 + PCIE1_PDI_PHY_BASE)
++#define PCIE1_PDI_SIZE 0x400
++
++#define PCIE_CFG_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_CFG_BASE) : (PCIE_CFG_BASE))
++#define PCIE_MEM_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_BASE) : (PCIE_MEM_BASE))
++#define PCIE_IO_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_BASE) : (PCIE_IO_BASE))
++#define PCIE_MEM_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_PHY_BASE) : (PCIE_MEM_PHY_BASE))
++#define PCIE_MEM_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_MEM_PHY_END) : (PCIE_MEM_PHY_END))
++#define PCIE_IO_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_PHY_BASE) : (PCIE_IO_PHY_BASE))
++#define PCIE_IO_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_IO_PHY_END) : (PCIE_IO_PHY_END))
++#define PCIE_APP_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_APP_LOGIC_REG) : (PCIE_APP_LOGIC_REG))
++#define PCIE_RC_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_RC_CFG_BASE) : (PCIE_RC_CFG_BASE))
++#define PCIE_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_PDI_BASE) : (PCIE_PDI_BASE))
++
++/* PCIe Application Logic Register */
++/* RC Core Control Register */
++#define PCIE_RC_CCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x10)
++/* This should be enabled after initializing configuratin registers
++ * Also should check link status retraining bit
++ */
++#define PCIE_RC_CCR_LTSSM_ENABLE 0x00000001 /* Enable LTSSM to continue link establishment */
++
++/* RC Core Debug Register */
++#define PCIE_RC_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x14)
++#define PCIE_RC_DR_DLL_UP 0x00000001 /* Data Link Layer Up */
++#define PCIE_RC_DR_CURRENT_POWER_STATE 0x0000000E /* Current Power State */
++#define PCIE_RC_DR_CURRENT_POWER_STATE_S 1
++#define PCIE_RC_DR_CURRENT_LTSSM_STATE 0x000001F0 /* Current LTSSM State */
++#define PCIE_RC_DR_CURRENT_LTSSM_STATE_S 4
++
++#define PCIE_RC_DR_PM_DEV_STATE 0x00000E00 /* Power Management D-State */
++#define PCIE_RC_DR_PM_DEV_STATE_S 9
++
++#define PCIE_RC_DR_PM_ENABLED 0x00001000 /* Power Management State from PMU */
++#define PCIE_RC_DR_PME_EVENT_ENABLED 0x00002000 /* Power Management Event Enable State */
++#define PCIE_RC_DR_AUX_POWER_ENABLED 0x00004000 /* Auxiliary Power Enable */
++
++/* Current Power State Definition */
++enum {
++ PCIE_RC_DR_D0 = 0,
++ PCIE_RC_DR_D1, /* Not supported */
++ PCIE_RC_DR_D2, /* Not supported */
++ PCIE_RC_DR_D3,
++ PCIE_RC_DR_UN,
++};
++
++/* PHY Link Status Register */
++#define PCIE_PHY_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x18)
++#define PCIE_PHY_SR_PHY_LINK_UP 0x00000001 /* PHY Link Up/Down Indicator */
++
++/* Electromechanical Control Register */
++#define PCIE_EM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x1C)
++#define PCIE_EM_CR_CARD_IS_PRESENT 0x00000001 /* Card Presence Detect State */
++#define PCIE_EM_CR_MRL_OPEN 0x00000002 /* MRL Sensor State */
++#define PCIE_EM_CR_POWER_FAULT_SET 0x00000004 /* Power Fault Detected */
++#define PCIE_EM_CR_MRL_SENSOR_SET 0x00000008 /* MRL Sensor Changed */
++#define PCIE_EM_CR_PRESENT_DETECT_SET 0x00000010 /* Card Presense Detect Changed */
++#define PCIE_EM_CR_CMD_CPL_INT_SET 0x00000020 /* Command Complete Interrupt */
++#define PCIE_EM_CR_SYS_INTERLOCK_SET 0x00000040 /* System Electromechanical IterLock Engaged */
++#define PCIE_EM_CR_ATTENTION_BUTTON_SET 0x00000080 /* Attention Button Pressed */
++
++/* Interrupt Status Register */
++#define PCIE_IR_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x20)
++#define PCIE_IR_SR_PME_CAUSE_MSI 0x00000002 /* MSI caused by PME */
++#define PCIE_IR_SR_HP_PME_WAKE_GEN 0x00000004 /* Hotplug PME Wake Generation */
++#define PCIE_IR_SR_HP_MSI 0x00000008 /* Hotplug MSI */
++#define PCIE_IR_SR_AHB_LU_ERR 0x00000030 /* AHB Bridge Lookup Error Signals */
++#define PCIE_IR_SR_AHB_LU_ERR_S 4
++#define PCIE_IR_SR_INT_MSG_NUM 0x00003E00 /* Interrupt Message Number */
++#define PCIE_IR_SR_INT_MSG_NUM_S 9
++#define PCIE_IR_SR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */
++#define PCIE_IR_SR_AER_INT_MSG_NUM_S 27
++
++/* Message Control Register */
++#define PCIE_MSG_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x30)
++#define PCIE_MSG_CR_GEN_PME_TURN_OFF_MSG 0x00000001 /* Generate PME Turn Off Message */
++#define PCIE_MSG_CR_GEN_UNLOCK_MSG 0x00000002 /* Generate Unlock Message */
++
++#define PCIE_VDM_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x34)
++
++/* Vendor-Defined Message Requester ID Register */
++#define PCIE_VDM_RID(X) (PCIE_APP_PORT_TO_BASE (X) + 0x38)
++#define PCIE_VDM_RID_VENROR_MSG_REQ_ID 0x0000FFFF
++#define PCIE_VDM_RID_VDMRID_S 0
++
++/* ASPM Control Register */
++#define PCIE_ASPM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x40)
++#define PCIE_ASPM_CR_HOT_RST 0x00000001 /* Hot Reset Request to the downstream device */
++#define PCIE_ASPM_CR_REQ_EXIT_L1 0x00000002 /* Request to Exit L1 */
++#define PCIE_ASPM_CR_REQ_ENTER_L1 0x00000004 /* Request to Enter L1 */
++
++/* Vendor Message DW0 Register */
++#define PCIE_VM_MSG_DW0(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x50)
++#define PCIE_VM_MSG_DW0_TYPE 0x0000001F /* Message type */
++#define PCIE_VM_MSG_DW0_TYPE_S 0
++#define PCIE_VM_MSG_DW0_FORMAT 0x00000060 /* Format */
++#define PCIE_VM_MSG_DW0_FORMAT_S 5
++#define PCIE_VM_MSG_DW0_TC 0x00007000 /* Traffic Class */
++#define PCIE_VM_MSG_DW0_TC_S 12
++#define PCIE_VM_MSG_DW0_ATTR 0x000C0000 /* Atrributes */
++#define PCIE_VM_MSG_DW0_ATTR_S 18
++#define PCIE_VM_MSG_DW0_EP_TLP 0x00100000 /* Poisoned TLP */
++#define PCIE_VM_MSG_DW0_TD 0x00200000 /* TLP Digest */
++#define PCIE_VM_MSG_DW0_LEN 0xFFC00000 /* Length */
++#define PCIE_VM_MSG_DW0_LEN_S 22
++
++/* Format Definition */
++enum {
++ PCIE_VM_MSG_FORMAT_00 = 0, /* 3DW Hdr, no data*/
++ PCIE_VM_MSG_FORMAT_01, /* 4DW Hdr, no data */
++ PCIE_VM_MSG_FORMAT_10, /* 3DW Hdr, with data */
++ PCIE_VM_MSG_FORMAT_11, /* 4DW Hdr, with data */
++};
++
++/* Traffic Class Definition */
++enum {
++ PCIE_VM_MSG_TC0 = 0,
++ PCIE_VM_MSG_TC1,
++ PCIE_VM_MSG_TC2,
++ PCIE_VM_MSG_TC3,
++ PCIE_VM_MSG_TC4,
++ PCIE_VM_MSG_TC5,
++ PCIE_VM_MSG_TC6,
++ PCIE_VM_MSG_TC7,
++};
++
++/* Attributes Definition */
++enum {
++ PCIE_VM_MSG_ATTR_00 = 0, /* RO and No Snoop cleared */
++ PCIE_VM_MSG_ATTR_01, /* RO cleared , No Snoop set */
++ PCIE_VM_MSG_ATTR_10, /* RO set, No Snoop cleared*/
++ PCIE_VM_MSG_ATTR_11, /* RO and No Snoop set */
++};
++
++/* Payload Size Definition */
++#define PCIE_VM_MSG_LEN_MIN 0
++#define PCIE_VM_MSG_LEN_MAX 1024
++
++/* Vendor Message DW1 Register */
++#define PCIE_VM_MSG_DW1(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x54)
++#define PCIE_VM_MSG_DW1_FUNC_NUM 0x00000070 /* Function Number */
++#define PCIE_VM_MSG_DW1_FUNC_NUM_S 8
++#define PCIE_VM_MSG_DW1_CODE 0x00FF0000 /* Message Code */
++#define PCIE_VM_MSG_DW1_CODE_S 16
++#define PCIE_VM_MSG_DW1_TAG 0xFF000000 /* Tag */
++#define PCIE_VM_MSG_DW1_TAG_S 24
++
++#define PCIE_VM_MSG_DW2(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x58)
++#define PCIE_VM_MSG_DW3(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x5C)
++
++/* Vendor Message Request Register */
++#define PCIE_VM_MSG_REQR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x60)
++#define PCIE_VM_MSG_REQR_REQ 0x00000001 /* Vendor Message Request */
++
++
++/* AHB Slave Side Band Control Register */
++#define PCIE_AHB_SSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x70)
++#define PCIE_AHB_SSB_REQ_BCM 0x00000001 /* Slave Reques BCM filed */
++#define PCIE_AHB_SSB_REQ_EP 0x00000002 /* Slave Reques EP filed */
++#define PCIE_AHB_SSB_REQ_TD 0x00000004 /* Slave Reques TD filed */
++#define PCIE_AHB_SSB_REQ_ATTR 0x00000018 /* Slave Reques Attribute number */
++#define PCIE_AHB_SSB_REQ_ATTR_S 3
++#define PCIE_AHB_SSB_REQ_TC 0x000000E0 /* Slave Request TC Field */
++#define PCIE_AHB_SSB_REQ_TC_S 5
++
++/* AHB Master SideBand Ctrl Register */
++#define PCIE_AHB_MSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x74)
++#define PCIE_AHB_MSB_RESP_ATTR 0x00000003 /* Master Response Attribute number */
++#define PCIE_AHB_MSB_RESP_ATTR_S 0
++#define PCIE_AHB_MSB_RESP_BAD_EOT 0x00000004 /* Master Response Badeot filed */
++#define PCIE_AHB_MSB_RESP_BCM 0x00000008 /* Master Response BCM filed */
++#define PCIE_AHB_MSB_RESP_EP 0x00000010 /* Master Response EP filed */
++#define PCIE_AHB_MSB_RESP_TD 0x00000020 /* Master Response TD filed */
++#define PCIE_AHB_MSB_RESP_FUN_NUM 0x000003C0 /* Master Response Function number */
++#define PCIE_AHB_MSB_RESP_FUN_NUM_S 6
++
++/* AHB Control Register, fixed bus enumeration exception */
++#define PCIE_AHB_CTRL(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x78)
++#define PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS 0x00000001
++
++/* Interrupt Enalbe Register */
++#define PCIE_IRNEN(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF4)
++#define PCIE_IRNCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF8)
++#define PCIE_IRNICR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xFC)
++
++/* PCIe interrupt enable/control/capture register definition */
++#define PCIE_IRN_AER_REPORT 0x00000001 /* AER Interrupt */
++#define PCIE_IRN_AER_MSIX 0x00000002 /* Advanced Error MSI-X Interrupt */
++#define PCIE_IRN_PME 0x00000004 /* PME Interrupt */
++#define PCIE_IRN_HOTPLUG 0x00000008 /* Hotplug Interrupt */
++#define PCIE_IRN_RX_VDM_MSG 0x00000010 /* Vendor-Defined Message Interrupt */
++#define PCIE_IRN_RX_CORRECTABLE_ERR_MSG 0x00000020 /* Correctable Error Message Interrupt */
++#define PCIE_IRN_RX_NON_FATAL_ERR_MSG 0x00000040 /* Non-fatal Error Message */
++#define PCIE_IRN_RX_FATAL_ERR_MSG 0x00000080 /* Fatal Error Message */
++#define PCIE_IRN_RX_PME_MSG 0x00000100 /* PME Message Interrupt */
++#define PCIE_IRN_RX_PME_TURNOFF_ACK 0x00000200 /* PME Turnoff Ack Message Interrupt */
++#define PCIE_IRN_AHB_BR_FATAL_ERR 0x00000400 /* AHB Fatal Error Interrupt */
++#define PCIE_IRN_LINK_AUTO_BW_STATUS 0x00000800 /* Link Auto Bandwidth Status Interrupt */
++#define PCIE_IRN_BW_MGT 0x00001000 /* Bandwidth Managment Interrupt */
++#define PCIE_IRN_INTA 0x00002000 /* INTA */
++#define PCIE_IRN_INTB 0x00004000 /* INTB */
++#define PCIE_IRN_INTC 0x00008000 /* INTC */
++#define PCIE_IRN_INTD 0x00010000 /* INTD */
++#define PCIE_IRN_WAKEUP 0x00020000 /* Wake up Interrupt */
++
++#define PCIE_RC_CORE_COMBINED_INT (PCIE_IRN_AER_REPORT | PCIE_IRN_AER_MSIX | PCIE_IRN_PME | \
++ PCIE_IRN_HOTPLUG | PCIE_IRN_RX_VDM_MSG | PCIE_IRN_RX_CORRECTABLE_ERR_MSG |\
++ PCIE_IRN_RX_NON_FATAL_ERR_MSG | PCIE_IRN_RX_FATAL_ERR_MSG | \
++ PCIE_IRN_RX_PME_MSG | PCIE_IRN_RX_PME_TURNOFF_ACK | PCIE_IRN_AHB_BR_FATAL_ERR | \
++ PCIE_IRN_LINK_AUTO_BW_STATUS | PCIE_IRN_BW_MGT)
++/* PCIe RC Configuration Register */
++#define PCIE_VDID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x00)
++
++/* Bit definition from pci_reg.h */
++#define PCIE_PCICMDSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x04)
++#define PCIE_CCRID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x08)
++#define PCIE_CLSLTHTBR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x0C) /* EP only */
++/* BAR0, BAR1,Only necessary if the bridges implements a device-specific register set or memory buffer */
++#define PCIE_BAR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10) /* Not used*/
++#define PCIE_BAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14) /* Not used */
++
++#define PCIE_BNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x18) /* Mandatory */
++/* Bus Number Register bits */
++#define PCIE_BNR_PRIMARY_BUS_NUM 0x000000FF
++#define PCIE_BNR_PRIMARY_BUS_NUM_S 0
++#define PCIE_PNR_SECONDARY_BUS_NUM 0x0000FF00
++#define PCIE_PNR_SECONDARY_BUS_NUM_S 8
++#define PCIE_PNR_SUB_BUS_NUM 0x00FF0000
++#define PCIE_PNR_SUB_BUS_NUM_S 16
++
++/* IO Base/Limit Register bits */
++#define PCIE_IOBLSECS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x1C) /* RC only */
++#define PCIE_IOBLSECS_32BIT_IO_ADDR 0x00000001
++#define PCIE_IOBLSECS_IO_BASE_ADDR 0x000000F0
++#define PCIE_IOBLSECS_IO_BASE_ADDR_S 4
++#define PCIE_IOBLSECS_32BIT_IOLIMT 0x00000100
++#define PCIE_IOBLSECS_IO_LIMIT_ADDR 0x0000F000
++#define PCIE_IOBLSECS_IO_LIMIT_ADDR_S 12
++
++/* Non-prefetchable Memory Base/Limit Register bit */
++#define PCIE_MBML(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x20) /* RC only */
++#define PCIE_MBML_MEM_BASE_ADDR 0x0000FFF0
++#define PCIE_MBML_MEM_BASE_ADDR_S 4
++#define PCIE_MBML_MEM_LIMIT_ADDR 0xFFF00000
++#define PCIE_MBML_MEM_LIMIT_ADDR_S 20
++
++/* Prefetchable Memory Base/Limit Register bit */
++#define PCIE_PMBL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x24) /* RC only */
++#define PCIE_PMBL_64BIT_ADDR 0x00000001
++#define PCIE_PMBL_UPPER_12BIT 0x0000FFF0
++#define PCIE_PMBL_UPPER_12BIT_S 4
++#define PCIE_PMBL_E64MA 0x00010000
++#define PCIE_PMBL_END_ADDR 0xFFF00000
++#define PCIE_PMBL_END_ADDR_S 20
++#define PCIE_PMBU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x28) /* RC only */
++#define PCIE_PMLU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x2C) /* RC only */
++
++/* I/O Base/Limit Upper 16 bits register */
++#define PCIE_IO_BANDL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x30) /* RC only */
++#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE 0x0000FFFF
++#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE_S 0
++#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT 0xFFFF0000
++#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT_S 16
++
++#define PCIE_CPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x34)
++#define PCIE_EBBAR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x38)
++
++/* Interrupt and Secondary Bridge Control Register */
++#define PCIE_INTRBCTRL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x3C)
++
++#define PCIE_INTRBCTRL_INT_LINE 0x000000FF
++#define PCIE_INTRBCTRL_INT_LINE_S 0
++#define PCIE_INTRBCTRL_INT_PIN 0x0000FF00
++#define PCIE_INTRBCTRL_INT_PIN_S 8
++#define PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE 0x00010000 /* #PERR */
++#define PCIE_INTRBCTRL_SERR_ENABLE 0x00020000 /* #SERR */
++#define PCIE_INTRBCTRL_ISA_ENABLE 0x00040000 /* ISA enable, IO 64KB only */
++#define PCIE_INTRBCTRL_VGA_ENABLE 0x00080000 /* VGA enable */
++#define PCIE_INTRBCTRL_VGA_16BIT_DECODE 0x00100000 /* VGA 16bit decode */
++#define PCIE_INTRBCTRL_RST_SECONDARY_BUS 0x00400000 /* Secondary bus rest, hot rest, 1ms */
++/* Others are read only */
++enum {
++ PCIE_INTRBCTRL_INT_NON = 0,
++ PCIE_INTRBCTRL_INTA,
++ PCIE_INTRBCTRL_INTB,
++ PCIE_INTRBCTRL_INTC,
++ PCIE_INTRBCTRL_INTD,
++};
++
++#define PCIE_PM_CAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x40)
++
++/* Power Management Control and Status Register */
++#define PCIE_PM_CSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x44)
++
++#define PCIE_PM_CSR_POWER_STATE 0x00000003 /* Power State */
++#define PCIE_PM_CSR_POWER_STATE_S 0
++#define PCIE_PM_CSR_SW_RST 0x00000008 /* Soft Reset Enabled */
++#define PCIE_PM_CSR_PME_ENABLE 0x00000100 /* PME Enable */
++#define PCIE_PM_CSR_PME_STATUS 0x00008000 /* PME status */
++
++/* MSI Capability Register for EP */
++#define PCIE_MCAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x50)
++
++#define PCIE_MCAPR_MSI_CAP_ID 0x000000FF /* MSI Capability ID */
++#define PCIE_MCAPR_MSI_CAP_ID_S 0
++#define PCIE_MCAPR_MSI_NEXT_CAP_PTR 0x0000FF00 /* Next Capability Pointer */
++#define PCIE_MCAPR_MSI_NEXT_CAP_PTR_S 8
++#define PCIE_MCAPR_MSI_ENABLE 0x00010000 /* MSI Enable */
++#define PCIE_MCAPR_MULTI_MSG_CAP 0x000E0000 /* Multiple Message Capable */
++#define PCIE_MCAPR_MULTI_MSG_CAP_S 17
++#define PCIE_MCAPR_MULTI_MSG_ENABLE 0x00700000 /* Multiple Message Enable */
++#define PCIE_MCAPR_MULTI_MSG_ENABLE_S 20
++#define PCIE_MCAPR_ADDR64_CAP 0X00800000 /* 64-bit Address Capable */
++
++/* MSI Message Address Register */
++#define PCIE_MA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x54)
++
++#define PCIE_MA_ADDR_MASK 0xFFFFFFFC /* Message Address */
++
++/* MSI Message Upper Address Register */
++#define PCIE_MUA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x58)
++
++/* MSI Message Data Register */
++#define PCIE_MD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x5C)
++
++#define PCIE_MD_DATA 0x0000FFFF /* Message Data */
++#define PCIE_MD_DATA_S 0
++
++/* PCI Express Capability Register */
++#define PCIE_XCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70)
++
++#define PCIE_XCAP_ID 0x000000FF /* PCI Express Capability ID */
++#define PCIE_XCAP_ID_S 0
++#define PCIE_XCAP_NEXT_CAP 0x0000FF00 /* Next Capability Pointer */
++#define PCIE_XCAP_NEXT_CAP_S 8
++#define PCIE_XCAP_VER 0x000F0000 /* PCI Express Capability Version */
++#define PCIE_XCAP_VER_S 16
++#define PCIE_XCAP_DEV_PORT_TYPE 0x00F00000 /* Device Port Type */
++#define PCIE_XCAP_DEV_PORT_TYPE_S 20
++#define PCIE_XCAP_SLOT_IMPLEMENTED 0x01000000 /* Slot Implemented */
++#define PCIE_XCAP_MSG_INT_NUM 0x3E000000 /* Interrupt Message Number */
++#define PCIE_XCAP_MSG_INT_NUM_S 25
++
++/* Device Capability Register */
++#define PCIE_DCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74)
++
++#define PCIE_DCAP_MAX_PAYLOAD_SIZE 0x00000007 /* Max Payload size */
++#define PCIE_DCAP_MAX_PAYLOAD_SIZE_S 0
++#define PCIE_DCAP_PHANTOM_FUNC 0x00000018 /* Phanton Function, not supported */
++#define PCIE_DCAP_PHANTOM_FUNC_S 3
++#define PCIE_DCAP_EXT_TAG 0x00000020 /* Extended Tag Field */
++#define PCIE_DCAP_EP_L0S_LATENCY 0x000001C0 /* EP L0s latency only */
++#define PCIE_DCAP_EP_L0S_LATENCY_S 6
++#define PCIE_DCAP_EP_L1_LATENCY 0x00000E00 /* EP L1 latency only */
++#define PCIE_DCAP_EP_L1_LATENCY_S 9
++#define PCIE_DCAP_ROLE_BASE_ERR_REPORT 0x00008000 /* Role Based ERR */
++
++/* Maximum payload size supported */
++enum {
++ PCIE_MAX_PAYLOAD_128 = 0,
++ PCIE_MAX_PAYLOAD_256,
++ PCIE_MAX_PAYLOAD_512,
++ PCIE_MAX_PAYLOAD_1024,
++ PCIE_MAX_PAYLOAD_2048,
++ PCIE_MAX_PAYLOAD_4096,
++};
++
++/* Device Control and Status Register */
++#define PCIE_DCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x78)
++
++#define PCIE_DCTLSTS_CORRECTABLE_ERR_EN 0x00000001 /* COR-ERR */
++#define PCIE_DCTLSTS_NONFATAL_ERR_EN 0x00000002 /* Non-fatal ERR */
++#define PCIE_DCTLSTS_FATAL_ERR_EN 0x00000004 /* Fatal ERR */
++#define PCIE_DCTLSYS_UR_REQ_EN 0x00000008 /* UR ERR */
++#define PCIE_DCTLSTS_RELAXED_ORDERING_EN 0x00000010 /* Enable relaxing ordering */
++#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE 0x000000E0 /* Max payload mask */
++#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE_S 5
++#define PCIE_DCTLSTS_EXT_TAG_EN 0x00000100 /* Extended tag field */
++#define PCIE_DCTLSTS_PHANTOM_FUNC_EN 0x00000200 /* Phantom Function Enable */
++#define PCIE_DCTLSTS_AUX_PM_EN 0x00000400 /* AUX Power PM Enable */
++#define PCIE_DCTLSTS_NO_SNOOP_EN 0x00000800 /* Enable no snoop, except root port*/
++#define PCIE_DCTLSTS_MAX_READ_SIZE 0x00007000 /* Max Read Request size*/
++#define PCIE_DCTLSTS_MAX_READ_SIZE_S 12
++#define PCIE_DCTLSTS_CORRECTABLE_ERR 0x00010000 /* COR-ERR Detected */
++#define PCIE_DCTLSTS_NONFATAL_ERR 0x00020000 /* Non-Fatal ERR Detected */
++#define PCIE_DCTLSTS_FATAL_ER 0x00040000 /* Fatal ERR Detected */
++#define PCIE_DCTLSTS_UNSUPPORTED_REQ 0x00080000 /* UR Detected */
++#define PCIE_DCTLSTS_AUX_POWER 0x00100000 /* Aux Power Detected */
++#define PCIE_DCTLSTS_TRANSACT_PENDING 0x00200000 /* Transaction pending */
++
++#define PCIE_DCTLSTS_ERR_EN (PCIE_DCTLSTS_CORRECTABLE_ERR_EN | \
++ PCIE_DCTLSTS_NONFATAL_ERR_EN | PCIE_DCTLSTS_FATAL_ERR_EN | \
++ PCIE_DCTLSYS_UR_REQ_EN)
++
++/* Link Capability Register */
++#define PCIE_LCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7C)
++#define PCIE_LCAP_MAX_LINK_SPEED 0x0000000F /* Max link speed, 0x1 by default */
++#define PCIE_LCAP_MAX_LINK_SPEED_S 0
++#define PCIE_LCAP_MAX_LENGTH_WIDTH 0x000003F0 /* Maxium Length Width */
++#define PCIE_LCAP_MAX_LENGTH_WIDTH_S 4
++#define PCIE_LCAP_ASPM_LEVEL 0x00000C00 /* Active State Link PM Support */
++#define PCIE_LCAP_ASPM_LEVEL_S 10
++#define PCIE_LCAP_L0S_EIXT_LATENCY 0x00007000 /* L0s Exit Latency */
++#define PCIE_LCAP_L0S_EIXT_LATENCY_S 12
++#define PCIE_LCAP_L1_EXIT_LATENCY 0x00038000 /* L1 Exit Latency */
++#define PCIE_LCAP_L1_EXIT_LATENCY_S 15
++#define PCIE_LCAP_CLK_PM 0x00040000 /* Clock Power Management */
++#define PCIE_LCAP_SDER 0x00080000 /* Surprise Down Error Reporting */
++#define PCIE_LCAP_DLL_ACTIVE_REPROT 0x00100000 /* Data Link Layer Active Reporting Capable */
++#define PCIE_LCAP_PORT_NUM 0xFF0000000 /* Port number */
++#define PCIE_LCAP_PORT_NUM_S 24
++
++/* Maximum Length width definition */
++#define PCIE_MAX_LENGTH_WIDTH_RES 0x00
++#define PCIE_MAX_LENGTH_WIDTH_X1 0x01 /* Default */
++#define PCIE_MAX_LENGTH_WIDTH_X2 0x02
++#define PCIE_MAX_LENGTH_WIDTH_X4 0x04
++#define PCIE_MAX_LENGTH_WIDTH_X8 0x08
++#define PCIE_MAX_LENGTH_WIDTH_X12 0x0C
++#define PCIE_MAX_LENGTH_WIDTH_X16 0x10
++#define PCIE_MAX_LENGTH_WIDTH_X32 0x20
++
++/* Active State Link PM definition */
++enum {
++ PCIE_ASPM_RES0 = 0,
++ PCIE_ASPM_L0S_ENTRY_SUPPORT, /* L0s */
++ PCIE_ASPM_RES1,
++ PCIE_ASPM_L0S_L1_ENTRY_SUPPORT, /* L0s and L1, default */
++};
++
++/* L0s Exit Latency definition */
++enum {
++ PCIE_L0S_EIXT_LATENCY_L64NS = 0, /* < 64 ns */
++ PCIE_L0S_EIXT_LATENCY_B64A128, /* > 64 ns < 128 ns */
++ PCIE_L0S_EIXT_LATENCY_B128A256, /* > 128 ns < 256 ns */
++ PCIE_L0S_EIXT_LATENCY_B256A512, /* > 256 ns < 512 ns */
++ PCIE_L0S_EIXT_LATENCY_B512TO1U, /* > 512 ns < 1 us */
++ PCIE_L0S_EIXT_LATENCY_B1A2U, /* > 1 us < 2 us */
++ PCIE_L0S_EIXT_LATENCY_B2A4U, /* > 2 us < 4 us */
++ PCIE_L0S_EIXT_LATENCY_M4US, /* > 4 us */
++};
++
++/* L1 Exit Latency definition */
++enum {
++ PCIE_L1_EXIT_LATENCY_L1US = 0, /* < 1 us */
++ PCIE_L1_EXIT_LATENCY_B1A2, /* > 1 us < 2 us */
++ PCIE_L1_EXIT_LATENCY_B2A4, /* > 2 us < 4 us */
++ PCIE_L1_EXIT_LATENCY_B4A8, /* > 4 us < 8 us */
++ PCIE_L1_EXIT_LATENCY_B8A16, /* > 8 us < 16 us */
++ PCIE_L1_EXIT_LATENCY_B16A32, /* > 16 us < 32 us */
++ PCIE_L1_EXIT_LATENCY_B32A64, /* > 32 us < 64 us */
++ PCIE_L1_EXIT_LATENCY_M64US, /* > 64 us */
++};
++
++/* Link Control and Status Register */
++#define PCIE_LCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x80)
++#define PCIE_LCTLSTS_ASPM_ENABLE 0x00000003 /* Active State Link PM Control */
++#define PCIE_LCTLSTS_ASPM_ENABLE_S 0
++#define PCIE_LCTLSTS_RCB128 0x00000008 /* Read Completion Boundary 128*/
++#define PCIE_LCTLSTS_LINK_DISABLE 0x00000010 /* Link Disable */
++#define PCIE_LCTLSTS_RETRIAN_LINK 0x00000020 /* Retrain Link */
++#define PCIE_LCTLSTS_COM_CLK_CFG 0x00000040 /* Common Clock Configuration */
++#define PCIE_LCTLSTS_EXT_SYNC 0x00000080 /* Extended Synch */
++#define PCIE_LCTLSTS_CLK_PM_EN 0x00000100 /* Enable Clock Powerm Management */
++#define PCIE_LCTLSTS_LINK_SPEED 0x000F0000 /* Link Speed */
++#define PCIE_LCTLSTS_LINK_SPEED_S 16
++#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH 0x03F00000 /* Negotiated Link Width */
++#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH_S 20
++#define PCIE_LCTLSTS_RETRAIN_PENDING 0x08000000 /* Link training is ongoing */
++#define PCIE_LCTLSTS_SLOT_CLK_CFG 0x10000000 /* Slot Clock Configuration */
++#define PCIE_LCTLSTS_DLL_ACTIVE 0x20000000 /* Data Link Layer Active */
++
++/* Slot Capabilities Register */
++#define PCIE_SLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x84)
++
++/* Slot Capabilities */
++#define PCIE_SLCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x88)
++
++/* Root Control and Capability Register */
++#define PCIE_RCTLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x8C)
++#define PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR 0x00000001 /* #SERR on COR-ERR */
++#define PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR 0x00000002 /* #SERR on Non-Fatal ERR */
++#define PCIE_RCTLCAP_SERR_ON_FATAL_ERR 0x00000004 /* #SERR on Fatal ERR */
++#define PCIE_RCTLCAP_PME_INT_EN 0x00000008 /* PME Interrupt Enable */
++#define PCIE_RCTLCAP_SERR_ENABLE (PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR | \
++ PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR | PCIE_RCTLCAP_SERR_ON_FATAL_ERR)
++/* Root Status Register */
++#define PCIE_RSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x90)
++#define PCIE_RSTS_PME_REQ_ID 0x0000FFFF /* PME Request ID */
++#define PCIE_RSTS_PME_REQ_ID_S 0
++#define PCIE_RSTS_PME_STATUS 0x00010000 /* PME Status */
++#define PCIE_RSTS_PME_PENDING 0x00020000 /* PME Pending */
++
++/* PCI Express Enhanced Capability Header */
++#define PCIE_ENHANCED_CAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x100)
++#define PCIE_ENHANCED_CAP_ID 0x0000FFFF /* PCI Express Extended Capability ID */
++#define PCIE_ENHANCED_CAP_ID_S 0
++#define PCIE_ENHANCED_CAP_VER 0x000F0000 /* Capability Version */
++#define PCIE_ENHANCED_CAP_VER_S 16
++#define PCIE_ENHANCED_CAP_NEXT_OFFSET 0xFFF00000 /* Next Capability Offset */
++#define PCIE_ENHANCED_CAP_NEXT_OFFSET_S 20
++
++/* Uncorrectable Error Status Register */
++#define PCIE_UES_R(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x104)
++#define PCIE_DATA_LINK_PROTOCOL_ERR 0x00000010 /* Data Link Protocol Error Status */
++#define PCIE_SURPRISE_DOWN_ERROR 0x00000020 /* Surprise Down Error Status */
++#define PCIE_POISONED_TLP 0x00001000 /* Poisoned TLP Status */
++#define PCIE_FC_PROTOCOL_ERR 0x00002000 /* Flow Control Protocol Error Status */
++#define PCIE_COMPLETION_TIMEOUT 0x00004000 /* Completion Timeout Status */
++#define PCIE_COMPLETOR_ABORT 0x00008000 /* Completer Abort Error */
++#define PCIE_UNEXPECTED_COMPLETION 0x00010000 /* Unexpected Completion Status */
++#define PCIE_RECEIVER_OVERFLOW 0x00020000 /* Receive Overflow Status */
++#define PCIE_MALFORNED_TLP 0x00040000 /* Malformed TLP Stauts */
++#define PCIE_ECRC_ERR 0x00080000 /* ECRC Error Stauts */
++#define PCIE_UR_REQ 0x00100000 /* Unsupported Request Error Status */
++#define PCIE_ALL_UNCORRECTABLE_ERR (PCIE_DATA_LINK_PROTOCOL_ERR | PCIE_SURPRISE_DOWN_ERROR | \
++ PCIE_POISONED_TLP | PCIE_FC_PROTOCOL_ERR | PCIE_COMPLETION_TIMEOUT | \
++ PCIE_COMPLETOR_ABORT | PCIE_UNEXPECTED_COMPLETION | PCIE_RECEIVER_OVERFLOW |\
++ PCIE_MALFORNED_TLP | PCIE_ECRC_ERR | PCIE_UR_REQ)
++
++/* Uncorrectable Error Mask Register, Mask means no report */
++#define PCIE_UEMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x108)
++
++/* Uncorrectable Error Severity Register */
++#define PCIE_UESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10C)
++
++/* Correctable Error Status Register */
++#define PCIE_CESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x110)
++#define PCIE_RX_ERR 0x00000001 /* Receive Error Status */
++#define PCIE_BAD_TLP 0x00000040 /* Bad TLP Status */
++#define PCIE_BAD_DLLP 0x00000080 /* Bad DLLP Status */
++#define PCIE_REPLAY_NUM_ROLLOVER 0x00000100 /* Replay Number Rollover Status */
++#define PCIE_REPLAY_TIMER_TIMEOUT_ERR 0x00001000 /* Reply Timer Timeout Status */
++#define PCIE_ADVISORY_NONFTAL_ERR 0x00002000 /* Advisory Non-Fatal Error Status */
++#define PCIE_CORRECTABLE_ERR (PCIE_RX_ERR | PCIE_BAD_TLP | PCIE_BAD_DLLP | PCIE_REPLAY_NUM_ROLLOVER |\
++ PCIE_REPLAY_TIMER_TIMEOUT_ERR | PCIE_ADVISORY_NONFTAL_ERR)
++
++/* Correctable Error Mask Register */
++#define PCIE_CEMR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x114)
++
++/* Advanced Error Capabilities and Control Register */
++#define PCIE_AECCR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x118)
++#define PCIE_AECCR_FIRST_ERR_PTR 0x0000001F /* First Error Pointer */
++#define PCIE_AECCR_FIRST_ERR_PTR_S 0
++#define PCIE_AECCR_ECRC_GEN_CAP 0x00000020 /* ECRC Generation Capable */
++#define PCIE_AECCR_ECRC_GEN_EN 0x00000040 /* ECRC Generation Enable */
++#define PCIE_AECCR_ECRC_CHECK_CAP 0x00000080 /* ECRC Check Capable */
++#define PCIE_AECCR_ECRC_CHECK_EN 0x00000100 /* ECRC Check Enable */
++
++/* Header Log Register 1 */
++#define PCIE_HLR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x11C)
++
++/* Header Log Register 2 */
++#define PCIE_HLR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x120)
++
++/* Header Log Register 3 */
++#define PCIE_HLR3(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x124)
++
++/* Header Log Register 4 */
++#define PCIE_HLR4(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x128)
++
++/* Root Error Command Register */
++#define PCIE_RECR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x12C)
++#define PCIE_RECR_CORRECTABLE_ERR_REPORT_EN 0x00000001 /* COR-ERR */
++#define PCIE_RECR_NONFATAL_ERR_REPORT_EN 0x00000002 /* Non-Fatal ERR */
++#define PCIE_RECR_FATAL_ERR_REPORT_EN 0x00000004 /* Fatal ERR */
++#define PCIE_RECR_ERR_REPORT_EN (PCIE_RECR_CORRECTABLE_ERR_REPORT_EN | \
++ PCIE_RECR_NONFATAL_ERR_REPORT_EN | PCIE_RECR_FATAL_ERR_REPORT_EN)
++
++/* Root Error Status Register */
++#define PCIE_RESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x130)
++#define PCIE_RESR_CORRECTABLE_ERR 0x00000001 /* COR-ERR Receveid */
++#define PCIE_RESR_MULTI_CORRECTABLE_ERR 0x00000002 /* Multiple COR-ERR Received */
++#define PCIE_RESR_FATAL_NOFATAL_ERR 0x00000004 /* ERR Fatal/Non-Fatal Received */
++#define PCIE_RESR_MULTI_FATAL_NOFATAL_ERR 0x00000008 /* Multiple ERR Fatal/Non-Fatal Received */
++#define PCIE_RESR_FIRST_UNCORRECTABLE_FATAL_ERR 0x00000010 /* First UN-COR Fatal */
++#define PCIR_RESR_NON_FATAL_ERR 0x00000020 /* Non-Fatal Error Message Received */
++#define PCIE_RESR_FATAL_ERR 0x00000040 /* Fatal Message Received */
++#define PCIE_RESR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */
++#define PCIE_RESR_AER_INT_MSG_NUM_S 27
++
++/* Error Source Indentification Register */
++#define PCIE_ESIR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x134)
++#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID 0x0000FFFF
++#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID_S 0
++#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID 0xFFFF0000
++#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID_S 16
++
++/* VC Enhanced Capability Header */
++#define PCIE_VC_ECH(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x140)
++
++/* Port VC Capability Register */
++#define PCIE_PVC1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x144)
++#define PCIE_PVC1_EXT_VC_CNT 0x00000007 /* Extended VC Count */
++#define PCIE_PVC1_EXT_VC_CNT_S 0
++#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT 0x00000070 /* Low Priority Extended VC Count */
++#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT_S 4
++#define PCIE_PVC1_REF_CLK 0x00000300 /* Reference Clock */
++#define PCIE_PVC1_REF_CLK_S 8
++#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE 0x00000C00 /* Port Arbitration Table Entry Size */
++#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE_S 10
++
++/* Extended Virtual Channel Count Defintion */
++#define PCIE_EXT_VC_CNT_MIN 0
++#define PCIE_EXT_VC_CNT_MAX 7
++
++/* Port Arbitration Table Entry Size Definition */
++enum {
++ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S1BIT = 0,
++ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S2BIT,
++ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S4BIT,
++ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S8BIT,
++};
++
++/* Port VC Capability Register 2 */
++#define PCIE_PVC2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x148)
++#define PCIE_PVC2_VC_ARB_16P_FIXED_WRR 0x00000001 /* HW Fixed arbitration, 16 phase WRR */
++#define PCIE_PVC2_VC_ARB_32P_WRR 0x00000002 /* 32 phase WRR */
++#define PCIE_PVC2_VC_ARB_64P_WRR 0x00000004 /* 64 phase WRR */
++#define PCIE_PVC2_VC_ARB_128P_WRR 0x00000008 /* 128 phase WRR */
++#define PCIE_PVC2_VC_ARB_WRR 0x0000000F
++#define PCIE_PVC2_VC_ARB_TAB_OFFSET 0xFF000000 /* VC arbitration table offset, not support */
++#define PCIE_PVC2_VC_ARB_TAB_OFFSET_S 24
++
++/* Port VC Control and Status Register */
++#define PCIE_PVCCRSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14C)
++#define PCIE_PVCCRSR_LOAD_VC_ARB_TAB 0x00000001 /* Load VC Arbitration Table */
++#define PCIE_PVCCRSR_VC_ARB_SEL 0x0000000E /* VC Arbitration Select */
++#define PCIE_PVCCRSR_VC_ARB_SEL_S 1
++#define PCIE_PVCCRSR_VC_ARB_TAB_STATUS 0x00010000 /* Arbitration Status */
++
++/* VC0 Resource Capability Register */
++#define PCIE_VC0_RC(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x150)
++#define PCIE_VC0_RC_PORT_ARB_HW_FIXED 0x00000001 /* HW Fixed arbitration */
++#define PCIE_VC0_RC_PORT_ARB_32P_WRR 0x00000002 /* 32 phase WRR */
++#define PCIE_VC0_RC_PORT_ARB_64P_WRR 0x00000004 /* 64 phase WRR */
++#define PCIE_VC0_RC_PORT_ARB_128P_WRR 0x00000008 /* 128 phase WRR */
++#define PCIE_VC0_RC_PORT_ARB_TM_128P_WRR 0x00000010 /* Time-based 128 phase WRR */
++#define PCIE_VC0_RC_PORT_ARB_TM_256P_WRR 0x00000020 /* Time-based 256 phase WRR */
++#define PCIE_VC0_RC_PORT_ARB (PCIE_VC0_RC_PORT_ARB_HW_FIXED | PCIE_VC0_RC_PORT_ARB_32P_WRR |\
++ PCIE_VC0_RC_PORT_ARB_64P_WRR | PCIE_VC0_RC_PORT_ARB_128P_WRR | \
++ PCIE_VC0_RC_PORT_ARB_TM_128P_WRR | PCIE_VC0_RC_PORT_ARB_TM_256P_WRR)
++
++#define PCIE_VC0_RC_REJECT_SNOOP 0x00008000 /* Reject Snoop Transactioin */
++#define PCIE_VC0_RC_MAX_TIMESLOTS 0x007F0000 /* Maximum time Slots */
++#define PCIE_VC0_RC_MAX_TIMESLOTS_S 16
++#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET 0xFF000000 /* Port Arbitration Table Offset */
++#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET_S 24
++
++/* VC0 Resource Control Register */
++#define PCIE_VC0_RC0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x154)
++#define PCIE_VC0_RC0_TVM0 0x00000001 /* TC0 and VC0 */
++#define PCIE_VC0_RC0_TVM1 0x00000002 /* TC1 and VC1 */
++#define PCIE_VC0_RC0_TVM2 0x00000004 /* TC2 and VC2 */
++#define PCIE_VC0_RC0_TVM3 0x00000008 /* TC3 and VC3 */
++#define PCIE_VC0_RC0_TVM4 0x00000010 /* TC4 and VC4 */
++#define PCIE_VC0_RC0_TVM5 0x00000020 /* TC5 and VC5 */
++#define PCIE_VC0_RC0_TVM6 0x00000040 /* TC6 and VC6 */
++#define PCIE_VC0_RC0_TVM7 0x00000080 /* TC7 and VC7 */
++#define PCIE_VC0_RC0_TC_VC 0x000000FF /* TC/VC mask */
++
++#define PCIE_VC0_RC0_LOAD_PORT_ARB_TAB 0x00010000 /* Load Port Arbitration Table */
++#define PCIE_VC0_RC0_PORT_ARB_SEL 0x000E0000 /* Port Arbitration Select */
++#define PCIE_VC0_RC0_PORT_ARB_SEL_S 17
++#define PCIE_VC0_RC0_VC_ID 0x07000000 /* VC ID */
++#define PCIE_VC0_RC0_VC_ID_S 24
++#define PCIE_VC0_RC0_VC_EN 0x80000000 /* VC Enable */
++
++/* VC0 Resource Status Register */
++#define PCIE_VC0_RSR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x158)
++#define PCIE_VC0_RSR0_PORT_ARB_TAB_STATUS 0x00010000 /* Port Arbitration Table Status,not used */
++#define PCIE_VC0_RSR0_VC_NEG_PENDING 0x00020000 /* VC Negotiation Pending */
++
++/* Ack Latency Timer and Replay Timer Register */
++#define PCIE_ALTRT(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x700)
++#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT 0x0000FFFF /* Round Trip Latency Time Limit */
++#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT_S 0
++#define PCIE_ALTRT_REPLAY_TIME_LIMIT 0xFFFF0000 /* Replay Time Limit */
++#define PCIE_ALTRT_REPLAY_TIME_LIMIT_S 16
++
++/* Other Message Register */
++#define PCIE_OMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x704)
++
++/* Port Force Link Register */
++#define PCIE_PFLR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x708)
++#define PCIE_PFLR_LINK_NUM 0x000000FF /* Link Number */
++#define PCIE_PFLR_LINK_NUM_S 0
++#define PCIE_PFLR_FORCE_LINK 0x00008000 /* Force link */
++#define PCIE_PFLR_LINK_STATE 0x003F0000 /* Link State */
++#define PCIE_PFLR_LINK_STATE_S 16
++#define PCIE_PFLR_LOW_POWER_ENTRY_CNT 0xFF000000 /* Low Power Entrance Count, only for EP */
++#define PCIE_PFLR_LOW_POWER_ENTRY_CNT_S 24
++
++/* Ack Frequency Register */
++#define PCIE_AFR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70C)
++#define PCIE_AFR_AF 0x000000FF /* Ack Frequency */
++#define PCIE_AFR_AF_S 0
++#define PCIE_AFR_FTS_NUM 0x0000FF00 /* The number of Fast Training Sequence from L0S to L0 */
++#define PCIE_AFR_FTS_NUM_S 8
++#define PCIE_AFR_COM_FTS_NUM 0x00FF0000 /* N_FTS; when common clock is used*/
++#define PCIE_AFR_COM_FTS_NUM_S 16
++#define PCIE_AFR_L0S_ENTRY_LATENCY 0x07000000 /* L0s Entrance Latency */
++#define PCIE_AFR_L0S_ENTRY_LATENCY_S 24
++#define PCIE_AFR_L1_ENTRY_LATENCY 0x38000000 /* L1 Entrance Latency */
++#define PCIE_AFR_L1_ENTRY_LATENCY_S 27
++#define PCIE_AFR_FTS_NUM_DEFAULT 32
++#define PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT 7
++#define PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT 5
++
++/* Port Link Control Register */
++#define PCIE_PLCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x710)
++#define PCIE_PLCR_OTHER_MSG_REQ 0x00000001 /* Other Message Request */
++#define PCIE_PLCR_SCRAMBLE_DISABLE 0x00000002 /* Scramble Disable */
++#define PCIE_PLCR_LOOPBACK_EN 0x00000004 /* Loopback Enable */
++#define PCIE_PLCR_LTSSM_HOT_RST 0x00000008 /* Force LTSSM to the hot reset */
++#define PCIE_PLCR_DLL_LINK_EN 0x00000020 /* Enable Link initialization */
++#define PCIE_PLCR_FAST_LINK_SIM_EN 0x00000080 /* Sets all internal timers to fast mode for simulation purposes */
++#define PCIE_PLCR_LINK_MODE 0x003F0000 /* Link Mode Enable Mask */
++#define PCIE_PLCR_LINK_MODE_S 16
++#define PCIE_PLCR_CORRUPTED_CRC_EN 0x02000000 /* Enabled Corrupt CRC */
++
++/* Lane Skew Register */
++#define PCIE_LSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x714)
++#define PCIE_LSR_LANE_SKEW_NUM 0x00FFFFFF /* Insert Lane Skew for Transmit, not applicable */
++#define PCIE_LSR_LANE_SKEW_NUM_S 0
++#define PCIE_LSR_FC_DISABLE 0x01000000 /* Disable of Flow Control */
++#define PCIE_LSR_ACKNAK_DISABLE 0x02000000 /* Disable of Ack/Nak */
++#define PCIE_LSR_LANE_DESKEW_DISABLE 0x80000000 /* Disable of Lane-to-Lane Skew */
++
++/* Symbol Number Register */
++#define PCIE_SNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x718)
++#define PCIE_SNR_TS 0x0000000F /* Number of TS Symbol */
++#define PCIE_SNR_TS_S 0
++#define PCIE_SNR_SKP 0x00000700 /* Number of SKP Symbol */
++#define PCIE_SNR_SKP_S 8
++#define PCIE_SNR_REPLAY_TIMER 0x0007C000 /* Timer Modifier for Replay Timer */
++#define PCIE_SNR_REPLAY_TIMER_S 14
++#define PCIE_SNR_ACKNAK_LATENCY_TIMER 0x00F80000 /* Timer Modifier for Ack/Nak Latency Timer */
++#define PCIE_SNR_ACKNAK_LATENCY_TIMER_S 19
++#define PCIE_SNR_FC_TIMER 0x1F000000 /* Timer Modifier for Flow Control Watchdog Timer */
++#define PCIE_SNR_FC_TIMER_S 28
++
++/* Symbol Timer Register and Filter Mask Register 1 */
++#define PCIE_STRFMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x71C)
++#define PCIE_STRFMR_SKP_INTERVAL 0x000007FF /* SKP lnterval Value */
++#define PCIE_STRFMR_SKP_INTERVAL_S 0
++#define PCIE_STRFMR_FC_WDT_DISABLE 0x00008000 /* Disable of FC Watchdog Timer */
++#define PCIE_STRFMR_TLP_FUNC_MISMATCH_OK 0x00010000 /* Mask Function Mismatch Filtering for Incoming Requests */
++#define PCIE_STRFMR_POISONED_TLP_OK 0x00020000 /* Mask Poisoned TLP Filtering */
++#define PCIE_STRFMR_BAR_MATCH_OK 0x00040000 /* Mask BAR Match Filtering */
++#define PCIE_STRFMR_TYPE1_CFG_REQ_OK 0x00080000 /* Mask Type 1 Configuration Request Filtering */
++#define PCIE_STRFMR_LOCKED_REQ_OK 0x00100000 /* Mask Locked Request Filtering */
++#define PCIE_STRFMR_CPL_TAG_ERR_RULES_OK 0x00200000 /* Mask Tag Error Rules for Received Completions */
++#define PCIE_STRFMR_CPL_REQUESTOR_ID_MISMATCH_OK 0x00400000 /* Mask Requester ID Mismatch Error for Received Completions */
++#define PCIE_STRFMR_CPL_FUNC_MISMATCH_OK 0x00800000 /* Mask Function Mismatch Error for Received Completions */
++#define PCIE_STRFMR_CPL_TC_MISMATCH_OK 0x01000000 /* Mask Traffic Class Mismatch Error for Received Completions */
++#define PCIE_STRFMR_CPL_ATTR_MISMATCH_OK 0x02000000 /* Mask Attribute Mismatch Error for Received Completions */
++#define PCIE_STRFMR_CPL_LENGTH_MISMATCH_OK 0x04000000 /* Mask Length Mismatch Error for Received Completions */
++#define PCIE_STRFMR_TLP_ECRC_ERR_OK 0x08000000 /* Mask ECRC Error Filtering */
++#define PCIE_STRFMR_CPL_TLP_ECRC_OK 0x10000000 /* Mask ECRC Error Filtering for Completions */
++#define PCIE_STRFMR_RX_TLP_MSG_NO_DROP 0x20000000 /* Send Message TLPs */
++#define PCIE_STRFMR_RX_IO_TRANS_ENABLE 0x40000000 /* Mask Filtering of received I/O Requests */
++#define PCIE_STRFMR_RX_CFG_TRANS_ENABLE 0x80000000 /* Mask Filtering of Received Configuration Requests */
++
++#define PCIE_DEF_SKP_INTERVAL 700 /* 1180 ~1538 , 125MHz * 2, 250MHz * 1 */
++
++/* Filter Masker Register 2 */
++#define PCIE_FMR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x720)
++#define PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1 0x00000001 /* Mask RADM Filtering and Error Handling Rules */
++#define PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 0x00000002 /* Mask RADM Filtering and Error Handling Rules */
++
++/* Debug Register 0 */
++#define PCIE_DBR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x728)
++
++/* Debug Register 1 */
++#define PCIE_DBR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x72C)
++
++/* Transmit Posted FC Credit Status Register */
++#define PCIE_TPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x730)
++#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS 0x00000FFF /* Transmit Posted Data FC Credits */
++#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS_S 0
++#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS 0x000FF000 /* Transmit Posted Header FC Credits */
++#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS_S 12
++
++/* Transmit Non-Posted FC Credit Status */
++#define PCIE_TNPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x734)
++#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS 0x00000FFF /* Transmit Non-Posted Data FC Credits */
++#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS_S 0
++#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS 0x000FF000 /* Transmit Non-Posted Header FC Credits */
++#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS_S 12
++
++/* Transmit Complete FC Credit Status Register */
++#define PCIE_TCFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x738)
++#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS 0x00000FFF /* Transmit Completion Data FC Credits */
++#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS_S 0
++#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS 0x000FF000 /* Transmit Completion Header FC Credits */
++#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS_S 12
++
++/* Queue Status Register */
++#define PCIE_QSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x73C)
++#define PCIE_QSR_WAIT_UPDATE_FC_DLL 0x00000001 /* Received TLP FC Credits Not Returned */
++#define PCIE_QSR_TX_RETRY_BUF_NOT_EMPTY 0x00000002 /* Transmit Retry Buffer Not Empty */
++#define PCIE_QSR_RX_QUEUE_NOT_EMPTY 0x00000004 /* Received Queue Not Empty */
++
++/* VC Transmit Arbitration Register 1 */
++#define PCIE_VCTAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x740)
++#define PCIE_VCTAR1_WRR_WEIGHT_VC0 0x000000FF /* WRR Weight for VC0 */
++#define PCIE_VCTAR1_WRR_WEIGHT_VC1 0x0000FF00 /* WRR Weight for VC1 */
++#define PCIE_VCTAR1_WRR_WEIGHT_VC2 0x00FF0000 /* WRR Weight for VC2 */
++#define PCIE_VCTAR1_WRR_WEIGHT_VC3 0xFF000000 /* WRR Weight for VC3 */
++
++/* VC Transmit Arbitration Register 2 */
++#define PCIE_VCTAR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x744)
++#define PCIE_VCTAR2_WRR_WEIGHT_VC4 0x000000FF /* WRR Weight for VC4 */
++#define PCIE_VCTAR2_WRR_WEIGHT_VC5 0x0000FF00 /* WRR Weight for VC5 */
++#define PCIE_VCTAR2_WRR_WEIGHT_VC6 0x00FF0000 /* WRR Weight for VC6 */
++#define PCIE_VCTAR2_WRR_WEIGHT_VC7 0xFF000000 /* WRR Weight for VC7 */
++
++/* VC0 Posted Receive Queue Control Register */
++#define PCIE_VC0_PRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x748)
++#define PCIE_VC0_PRQCR_P_DATA_CREDITS 0x00000FFF /* VC0 Posted Data Credits */
++#define PCIE_VC0_PRQCR_P_DATA_CREDITS_S 0
++#define PCIE_VC0_PRQCR_P_HDR_CREDITS 0x000FF000 /* VC0 Posted Header Credits */
++#define PCIE_VC0_PRQCR_P_HDR_CREDITS_S 12
++#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE 0x00E00000 /* VC0 Posted TLP Queue Mode */
++#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE_S 20
++#define PCIE_VC0_PRQCR_TLP_RELAX_ORDER 0x40000000 /* TLP Type Ordering for VC0 */
++#define PCIE_VC0_PRQCR_VC_STRICT_ORDER 0x80000000 /* VC0 Ordering for Receive Queues */
++
++/* VC0 Non-Posted Receive Queue Control */
++#define PCIE_VC0_NPRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74C)
++#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS 0x00000FFF /* VC0 Non-Posted Data Credits */
++#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS_S 0
++#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS 0x000FF000 /* VC0 Non-Posted Header Credits */
++#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS_S 12
++#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE 0x00E00000 /* VC0 Non-Posted TLP Queue Mode */
++#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE_S 20
++
++/* VC0 Completion Receive Queue Control */
++#define PCIE_VC0_CRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x750)
++#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS 0x00000FFF /* VC0 Completion TLP Queue Mode */
++#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS_S 0
++#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS 0x000FF000 /* VC0 Completion Header Credits */
++#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS_S 12
++#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE 0x00E00000 /* VC0 Completion Data Credits */
++#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE_S 21
++
++/* Applicable to the above three registers */
++enum {
++ PCIE_VC0_TLP_QUEUE_MODE_STORE_FORWARD = 1,
++ PCIE_VC0_TLP_QUEUE_MODE_CUT_THROUGH = 2,
++ PCIE_VC0_TLP_QUEUE_MODE_BYPASS = 4,
++};
++
++/* VC0 Posted Buffer Depth Register */
++#define PCIE_VC0_PBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7A8)
++#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Posted Data Queue Depth */
++#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES_S 0
++#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Posted Header Queue Depth */
++#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES_S 16
++
++/* VC0 Non-Posted Buffer Depth Register */
++#define PCIE_VC0_NPBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7AC)
++#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Non-Posted Data Queue Depth */
++#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES_S 0
++#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Non-Posted Header Queue Depth */
++#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES_S 16
++
++/* VC0 Completion Buffer Depth Register */
++#define PCIE_VC0_CBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7B0)
++#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES 0x00003FFF /* C0 Completion Data Queue Depth */
++#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES_S 0
++#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Completion Header Queue Depth */
++#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES_S 16
++
++/* PHY Status Register, all zeros in VR9 */
++#define PCIE_PHYSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x810)
++
++/* PHY Control Register, all zeros in VR9 */
++#define PCIE_PHYCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x814)
++
++/*
++ * PCIe PDI PHY register definition, suppose all the following
++ * stuff is confidential.
++ * XXX, detailed bit definition
++ */
++#define PCIE_PHY_PLL_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x22 << 1))
++#define PCIE_PHY_PLL_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x23 << 1))
++#define PCIE_PHY_PLL_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x24 << 1))
++#define PCIE_PHY_PLL_CTRL4(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x25 << 1))
++#define PCIE_PHY_PLL_CTRL5(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x26 << 1))
++#define PCIE_PHY_PLL_CTRL6(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x27 << 1))
++#define PCIE_PHY_PLL_CTRL7(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x28 << 1))
++#define PCIE_PHY_PLL_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x29 << 1))
++#define PCIE_PHY_PLL_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2A << 1))
++#define PCIE_PHY_PLL_A_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2B << 1))
++#define PCIE_PHY_PLL_STATUS(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2C << 1))
++
++#define PCIE_PHY_TX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x30 << 1))
++#define PCIE_PHY_TX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x31 << 1))
++#define PCIE_PHY_TX1_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x32 << 1))
++#define PCIE_PHY_TX1_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x33 << 1))
++#define PCIE_PHY_TX1_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x34 << 1))
++#define PCIE_PHY_TX1_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x35 << 1))
++#define PCIE_PHY_TX1_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x36 << 1))
++#define PCIE_PHY_TX1_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x37 << 1))
++
++#define PCIE_PHY_TX2_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x38 << 1))
++#define PCIE_PHY_TX2_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x39 << 1))
++#define PCIE_PHY_TX2_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3B << 1))
++#define PCIE_PHY_TX2_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3C << 1))
++#define PCIE_PHY_TX2_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3D << 1))
++#define PCIE_PHY_TX2_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3E << 1))
++#define PCIE_PHY_TX2_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3F << 1))
++
++#define PCIE_PHY_RX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x50 << 1))
++#define PCIE_PHY_RX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x51 << 1))
++#define PCIE_PHY_RX1_CDR(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x52 << 1))
++#define PCIE_PHY_RX1_EI(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x53 << 1))
++#define PCIE_PHY_RX1_A_CTRL(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x55 << 1))
++
++/* Interrupt related stuff */
++#define PCIE_LEGACY_DISABLE 0
++#define PCIE_LEGACY_INTA 1
++#define PCIE_LEGACY_INTB 2
++#define PCIE_LEGACY_INTC 3
++#define PCIE_LEGACY_INTD 4
++#define PCIE_LEGACY_INT_MAX PCIE_LEGACY_INTD
++
++#endif /* IFXMIPS_PCIE_REG_H */
++
+diff --git a/arch/mips/pci/ifxmips_pcie_vr9.h b/arch/mips/pci/ifxmips_pcie_vr9.h
+new file mode 100644
+index 0000000..57d9368
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie_vr9.h
+@@ -0,0 +1,271 @@
++/****************************************************************************
++ Copyright (c) 2010
++ Lantiq Deutschland GmbH
++ Am Campeon 3; 85579 Neubiberg, Germany
++
++ For licensing information, see the file 'LICENSE' in the root folder of
++ this software module.
++
++ *****************************************************************************/
++/*!
++ \file ifxmips_pcie_vr9.h
++ \ingroup IFX_PCIE
++ \brief PCIe RC driver vr9 specific file
++*/
++
++#ifndef IFXMIPS_PCIE_VR9_H
++#define IFXMIPS_PCIE_VR9_H
++
++#include <linux/types.h>
++#include <linux/delay.h>
++
++#include <linux/gpio.h>
++#include <lantiq_soc.h>
++
++#define IFX_PCIE_GPIO_RESET 238
++
++#define IFX_REG_R32 ltq_r32
++#define IFX_REG_W32 ltq_w32
++#define CONFIG_IFX_PCIE_HW_SWAP
++#define IFX_RCU_AHB_ENDIAN ((volatile u32*)(IFX_RCU + 0x004C))
++#define IFX_RCU_RST_REQ ((volatile u32*)(IFX_RCU + 0x0010))
++#define IFX_RCU_AHB_BE_PCIE_PDI 0x00000080 /* Configure PCIE PDI module in big endian*/
++
++#define IFX_RCU (KSEG1 | 0x1F203000)
++#define IFX_RCU_AHB_BE_PCIE_M 0x00000001 /* Configure AHB master port that connects to PCIe RC in big endian */
++#define IFX_RCU_AHB_BE_PCIE_S 0x00000010 /* Configure AHB slave port that connects to PCIe RC in little endian */
++#define IFX_RCU_AHB_BE_XBAR_M 0x00000002 /* Configure AHB master port that connects to XBAR in big endian */
++#define CONFIG_IFX_PCIE_PHY_36MHZ_MODE
++
++#define IFX_PMU1_MODULE_PCIE_PHY (0)
++#define IFX_PMU1_MODULE_PCIE_CTRL (1)
++#define IFX_PMU1_MODULE_PDI (4)
++#define IFX_PMU1_MODULE_MSI (5)
++
++#define IFX_PMU_MODULE_PCIE_L0_CLK (31)
++
++
++#define IFX_GPIO (KSEG1 | 0x1E100B00)
++#define ALT0 ((volatile u32*)(IFX_GPIO + 0x007c))
++#define ALT1 ((volatile u32*)(IFX_GPIO + 0x0080))
++#define OD ((volatile u32*)(IFX_GPIO + 0x0084))
++#define DIR ((volatile u32*)(IFX_GPIO + 0x0078))
++#define OUT ((volatile u32*)(IFX_GPIO + 0x0070))
++
++
++static inline void pcie_ep_gpio_rst_init(int pcie_port)
++{
++
++ gpio_request(IFX_PCIE_GPIO_RESET, "pcie-reset");
++ gpio_direction_output(IFX_PCIE_GPIO_RESET, 1);
++ gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
++
++/* ifx_gpio_pin_reserve(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
++ ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
++ ifx_gpio_dir_out_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
++ ifx_gpio_altsel0_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
++ ifx_gpio_altsel1_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
++ ifx_gpio_open_drain_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);*/
++}
++
++static inline void pcie_ahb_pmu_setup(void)
++{
++ /* Enable AHB bus master/slave */
++ struct clk *clk;
++ clk = clk_get_sys("1d900000.pcie", "ahb");
++ clk_enable(clk);
++
++ //AHBM_PMU_SETUP(IFX_PMU_ENABLE);
++ //AHBS_PMU_SETUP(IFX_PMU_ENABLE);
++}
++
++static inline void pcie_rcu_endian_setup(int pcie_port)
++{
++ u32 reg;
++
++ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
++#ifdef CONFIG_IFX_PCIE_HW_SWAP
++ reg |= IFX_RCU_AHB_BE_PCIE_M;
++ reg |= IFX_RCU_AHB_BE_PCIE_S;
++ reg &= ~IFX_RCU_AHB_BE_XBAR_M;
++#else
++ reg |= IFX_RCU_AHB_BE_PCIE_M;
++ reg &= ~IFX_RCU_AHB_BE_PCIE_S;
++ reg &= ~IFX_RCU_AHB_BE_XBAR_M;
++#endif /* CONFIG_IFX_PCIE_HW_SWAP */
++ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN));
++}
++
++static inline void pcie_phy_pmu_enable(int pcie_port)
++{
++ struct clk *clk;
++ clk = clk_get_sys("1d900000.pcie", "phy");
++ clk_enable(clk);
++
++ //PCIE_PHY_PMU_SETUP(IFX_PMU_ENABLE);
++}
++
++static inline void pcie_phy_pmu_disable(int pcie_port)
++{
++ struct clk *clk;
++ clk = clk_get_sys("1d900000.pcie", "phy");
++ clk_disable(clk);
++
++// PCIE_PHY_PMU_SETUP(IFX_PMU_DISABLE);
++}
++
++static inline void pcie_pdi_big_endian(int pcie_port)
++{
++ u32 reg;
++
++ /* SRAM2PDI endianness control. */
++ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
++ /* Config AHB->PCIe and PDI endianness */
++ reg |= IFX_RCU_AHB_BE_PCIE_PDI;
++ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
++}
++
++static inline void pcie_pdi_pmu_enable(int pcie_port)
++{
++ /* Enable PDI to access PCIe PHY register */
++ struct clk *clk;
++ clk = clk_get_sys("1d900000.pcie", "pdi");
++ clk_enable(clk);
++ //PDI_PMU_SETUP(IFX_PMU_ENABLE);
++}
++
++static inline void pcie_core_rst_assert(int pcie_port)
++{
++ u32 reg;
++
++ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++
++ /* Reset PCIe PHY & Core, bit 22, bit 26 may be affected if write it directly */
++ reg |= 0x00400000;
++ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_core_rst_deassert(int pcie_port)
++{
++ u32 reg;
++
++ /* Make sure one micro-second delay */
++ udelay(1);
++
++ /* Reset PCIe PHY & Core, bit 22 */
++ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++ reg &= ~0x00400000;
++ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_phy_rst_assert(int pcie_port)
++{
++ u32 reg;
++
++ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++ reg |= 0x00001000; /* Bit 12 */
++ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_phy_rst_deassert(int pcie_port)
++{
++ u32 reg;
++
++ /* Make sure one micro-second delay */
++ udelay(1);
++
++ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++ reg &= ~0x00001000; /* Bit 12 */
++ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_device_rst_assert(int pcie_port)
++{
++ printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++ gpio_set_value(IFX_PCIE_GPIO_RESET, 0);
++// ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
++}
++
++static inline void pcie_device_rst_deassert(int pcie_port)
++{
++ mdelay(100);
++ printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++ gpio_direction_output(IFX_PCIE_GPIO_RESET, 1);
++// gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
++ //ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
++}
++
++static inline void pcie_core_pmu_setup(int pcie_port)
++{
++ struct clk *clk;
++ clk = clk_get_sys("1d900000.pcie", "ctl");
++ clk_enable(clk);
++ clk = clk_get_sys("1d900000.pcie", "bus");
++ clk_enable(clk);
++
++ /* PCIe Core controller enabled */
++// PCIE_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
++
++ /* Enable PCIe L0 Clock */
++// PCIE_L0_CLK_PMU_SETUP(IFX_PMU_ENABLE);
++}
++
++static inline void pcie_msi_init(int pcie_port)
++{
++ struct clk *clk;
++ pcie_msi_pic_init(pcie_port);
++ clk = clk_get_sys("ltq_pcie", "msi");
++ clk_enable(clk);
++// MSI_PMU_SETUP(IFX_PMU_ENABLE);
++}
++
++static inline u32
++ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port)
++{
++ u32 tbus_number = bus_number;
++
++#ifdef CONFIG_IFX_PCI
++ if (pcibios_host_nr() > 1) {
++ tbus_number -= pcibios_1st_host_bus_nr();
++ }
++#endif /* CONFIG_IFX_PCI */
++ return tbus_number;
++}
++
++static inline u32
++ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read)
++{
++ struct pci_dev *pdev;
++ u32 tvalue = value;
++
++ /* Sanity check */
++ pdev = pci_get_slot(bus, devfn);
++ if (pdev == NULL) {
++ return tvalue;
++ }
++
++ /* Only care about PCI bridge */
++ if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
++ return tvalue;
++ }
++
++ if (read) { /* Read hack */
++ #ifdef CONFIG_IFX_PCI
++ if (pcibios_host_nr() > 1) {
++ tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue);
++ }
++ #endif /* CONFIG_IFX_PCI */
++ }
++ else { /* Write hack */
++ #ifdef CONFIG_IFX_PCI
++ if (pcibios_host_nr() > 1) {
++ tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue);
++ }
++ #endif
++ }
++ return tvalue;
++}
++
++#endif /* IFXMIPS_PCIE_VR9_H */
++
+diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
+index a184344..35ca57f 100644
+--- a/arch/mips/pci/pci.c
++++ b/arch/mips/pci/pci.c
+@@ -249,6 +249,31 @@ static int __init pcibios_init(void)
+
+ subsys_initcall(pcibios_init);
+
++int pcibios_host_nr(void)
++{
++ int count;
++ struct pci_controller *hose;
++ for (count = 0, hose = hose_head; hose; hose = hose->next, count++) {
++ ;
++ }
++ return count;
++}
++EXPORT_SYMBOL(pcibios_host_nr);
++
++int pcibios_1st_host_bus_nr(void)
++{
++ int bus_nr = 0;
++ struct pci_controller *hose = hose_head;
++
++ if (hose != NULL) {
++ if (hose->bus != NULL) {
++ bus_nr = hose->bus->number + 1;
++ }
++ }
++ return bus_nr;
++}
++EXPORT_SYMBOL(pcibios_1st_host_bus_nr);
++
+ static int pcibios_enable_resources(struct pci_dev *dev, int mask)
+ {
+ u16 cmd, old_cmd;
+diff --git a/drivers/pci/pcie/aer/Kconfig b/drivers/pci/pcie/aer/Kconfig
+index 50e94e0..4bf848f 100644
+--- a/drivers/pci/pcie/aer/Kconfig
++++ b/drivers/pci/pcie/aer/Kconfig
+@@ -5,7 +5,7 @@
+ config PCIEAER
+ boolean "Root Port Advanced Error Reporting support"
+ depends on PCIEPORTBUS
+- default y
++ default n
+ help
+ This enables PCI Express Root Port Advanced Error Reporting
+ (AER) driver support. Error reporting messages sent to Root
+diff --git a/include/linux/pci.h b/include/linux/pci.h
+index 15472d6..73b6926 100644
+--- a/include/linux/pci.h
++++ b/include/linux/pci.h
+@@ -1059,6 +1059,8 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
+ int pci_cfg_space_size_ext(struct pci_dev *dev);
+ int pci_cfg_space_size(struct pci_dev *dev);
+ unsigned char pci_bus_max_busnr(struct pci_bus *bus);
++int pcibios_host_nr(void);
++int pcibios_1st_host_bus_nr(void);
+ void pci_setup_bridge(struct pci_bus *bus);
+ resource_size_t pcibios_window_alignment(struct pci_bus *bus,
+ unsigned long type);
+diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
+index 0eb6579..81adb58 100644
+--- a/include/linux/pci_ids.h
++++ b/include/linux/pci_ids.h
+@@ -1040,6 +1040,12 @@
+ #define PCI_DEVICE_ID_SGI_LITHIUM 0x1002
+ #define PCI_DEVICE_ID_SGI_IOC4 0x100a
+
++#define PCI_VENDOR_ID_INFINEON 0x15D1
++#define PCI_DEVICE_ID_INFINEON_DANUBE 0x000F
++#define PCI_DEVICE_ID_INFINEON_PCIE 0x0011
++#define PCI_VENDOR_ID_LANTIQ 0x1BEF
++#define PCI_DEVICE_ID_LANTIQ_PCIE 0x00
++
+ #define PCI_VENDOR_ID_WINBOND 0x10ad
+ #define PCI_DEVICE_ID_WINBOND_82C105 0x0105
+ #define PCI_DEVICE_ID_WINBOND_83C553 0x0565
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0031-MIPS-lantiq-adds-minimal-dcdc-driver.patch b/target/linux/lantiq/patches-3.8/0031-MIPS-lantiq-adds-minimal-dcdc-driver.patch
new file mode 100644
index 0000000..805846a
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0031-MIPS-lantiq-adds-minimal-dcdc-driver.patch
@@ -0,0 +1,106 @@
+From 1f95983593d5b6634c13ead8f923237484dc611e Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 5 Dec 2012 17:38:48 +0100
+Subject: [PATCH 31/40] MIPS: lantiq: adds minimal dcdc driver
+
+This driver so far only reads the core voltage.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/lantiq/xway/Makefile | 2 +-
+ arch/mips/lantiq/xway/dcdc.c | 74 ++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 75 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/lantiq/xway/dcdc.c
+
+diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
+index 7a13660..087497d 100644
+--- a/arch/mips/lantiq/xway/Makefile
++++ b/arch/mips/lantiq/xway/Makefile
+@@ -1,3 +1,3 @@
+-obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o
++obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
+
+ obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
+diff --git a/arch/mips/lantiq/xway/dcdc.c b/arch/mips/lantiq/xway/dcdc.c
+new file mode 100644
+index 0000000..8dd871a
+--- /dev/null
++++ b/arch/mips/lantiq/xway/dcdc.c
+@@ -0,0 +1,74 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2010 Sameer Ahmad, Lantiq GmbH
++ */
++
++#include <linux/interrupt.h>
++#include <linux/ioport.h>
++#include <linux/module.h>
++#include <linux/of_platform.h>
++#include <linux/of_irq.h>
++
++#include <lantiq_soc.h>
++
++/* Bias and regulator Setup Register */
++#define DCDC_BIAS_VREG0 0xa
++/* Bias and regulator Setup Register */
++#define DCDC_BIAS_VREG1 0xb
++
++#define dcdc_w8(x, y) ltq_w8((x), dcdc_membase + (y))
++#define dcdc_r8(x) ltq_r8(dcdc_membase + (x))
++
++static void __iomem *dcdc_membase;
++
++static int dcdc_probe(struct platform_device *pdev)
++{
++ struct resource *res;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res) {
++ dev_err(&pdev->dev, "Failed to get resource\n");
++ return -ENOMEM;
++ }
++
++ /* remap dcdc register range */
++ dcdc_membase = devm_request_and_ioremap(&pdev->dev, res);
++ if (!dcdc_membase) {
++ dev_err(&pdev->dev, "Failed to remap resource\n");
++ return -ENOMEM;
++ }
++
++ dev_info(&pdev->dev, "Core Voltage : %d mV\n", dcdc_r8(DCDC_BIAS_VREG1) * 8);
++
++ return 0;
++}
++
++static const struct of_device_id dcdc_match[] = {
++ { .compatible = "lantiq,dcdc-xrx200" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, dcdc_match);
++
++static struct platform_driver dcdc_driver = {
++ .probe = dcdc_probe,
++ .driver = {
++ .name = "dcdc-xrx200",
++ .owner = THIS_MODULE,
++ .of_match_table = dcdc_match,
++ },
++};
++
++int __init dcdc_init(void)
++{
++ int ret = platform_driver_register(&dcdc_driver);
++
++ if (ret)
++ pr_info("dcdc: Error registering platform driver\n");
++ return ret;
++}
++
++arch_initcall(dcdc_init);
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0032-MTD-lantiq-Add-NAND-support-on-Lantiq-Falcon-SoC.patch b/target/linux/lantiq/patches-3.8/0032-MTD-lantiq-Add-NAND-support-on-Lantiq-Falcon-SoC.patch
new file mode 100644
index 0000000..ed9ca33
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0032-MTD-lantiq-Add-NAND-support-on-Lantiq-Falcon-SoC.patch
@@ -0,0 +1,138 @@
+From 2fd60458657ac96ab71ba4831cfb397145b3c989 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 30 Jan 2013 21:12:47 +0100
+Subject: [PATCH 32/40] MTD: lantiq: Add NAND support on Lantiq Falcon SoC.
+
+The driver uses plat_nand. As the platform_device is loaded from DT, we need
+to lookup the node and attach our falcon specific "struct platform_nand_data"
+to it.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/mtd/nand/Kconfig | 8 ++++
+ drivers/mtd/nand/Makefile | 1 +
+ drivers/mtd/nand/falcon_nand.c | 83 ++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 92 insertions(+)
+ create mode 100644 drivers/mtd/nand/falcon_nand.c
+
+diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
+index 5819eb5..058939d 100644
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -575,4 +575,12 @@ config MTD_NAND_XWAY
+ Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
+ to the External Bus Unit (EBU).
+
++config MTD_NAND_FALCON
++ tristate "Support for NAND on Lantiq FALC-ON SoC"
++ depends on LANTIQ && SOC_FALCON
++ select MTD_NAND_PLATFORM
++ help
++ Enables support for NAND Flash chips on Lantiq FALC-ON SoCs. NAND is
++ attached to the External Bus Unit (EBU).
++
+ endif # MTD_NAND
+diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
+index d76d912..1a61bf0 100644
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -53,5 +53,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
+ obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
+ obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o
+ obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
++obj-$(CONFIG_MTD_NAND_FALCON) += falcon_nand.o
+
+ nand-objs := nand_base.o nand_bbt.o
+diff --git a/drivers/mtd/nand/falcon_nand.c b/drivers/mtd/nand/falcon_nand.c
+new file mode 100644
+index 0000000..13458d3
+--- /dev/null
++++ b/drivers/mtd/nand/falcon_nand.c
+@@ -0,0 +1,83 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
++ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/mtd/nand.h>
++#include <linux/of_platform.h>
++
++#include <lantiq_soc.h>
++
++/* address lines used for NAND control signals */
++#define NAND_ADDR_ALE 0x10000
++#define NAND_ADDR_CLE 0x20000
++
++/* Ready/Busy Status */
++#define MODCON_STS 0x0002
++
++/* Ready/Busy Status Edge */
++#define MODCON_STSEDGE 0x0004
++#define LTQ_EBU_MODCON 0x000C
++
++static const char const *part_probes[] = { "cmdlinepart", "ofpart", NULL };
++
++static int falcon_nand_ready(struct mtd_info *mtd)
++{
++ u32 modcon = ltq_ebu_r32(LTQ_EBU_MODCON);
++
++ return (((modcon & (MODCON_STS | MODCON_STSEDGE)) ==
++ (MODCON_STS | MODCON_STSEDGE)));
++}
++
++static void falcon_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
++{
++ struct nand_chip *this = mtd->priv;
++ unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
++
++ if (ctrl & NAND_CTRL_CHANGE) {
++ nandaddr &= ~(NAND_ADDR_ALE | NAND_ADDR_CLE);
++
++ if (ctrl & NAND_CLE)
++ nandaddr |= NAND_ADDR_CLE;
++ if (ctrl & NAND_ALE)
++ nandaddr |= NAND_ADDR_ALE;
++
++ this->IO_ADDR_W = (void __iomem *) nandaddr;
++ }
++
++ if (cmd != NAND_CMD_NONE)
++ writeb(cmd, this->IO_ADDR_W);
++}
++
++static struct platform_nand_data falcon_nand_data = {
++ .chip = {
++ .nr_chips = 1,
++ .chip_delay = 25,
++ .part_probe_types = part_probes,
++ },
++ .ctrl = {
++ .cmd_ctrl = falcon_hwcontrol,
++ .dev_ready = falcon_nand_ready,
++ }
++};
++
++int __init falcon_register_nand(void)
++{
++ struct device_node *node;
++ struct platform_device *pdev;
++
++ node = of_find_compatible_node(NULL, NULL, "lantiq,nand-falcon");
++ if (!node)
++ return -1;
++ pdev = of_find_device_by_node(node);
++ if (pdev)
++ pdev->dev.platform_data = &falcon_nand_data;
++ of_node_put(node);
++ return 0;
++}
++
++arch_initcall(falcon_register_nand);
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0033-MTD-lantiq-xway-make-nand-actually-work.patch b/target/linux/lantiq/patches-3.8/0033-MTD-lantiq-xway-make-nand-actually-work.patch
new file mode 100644
index 0000000..89044d5
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0033-MTD-lantiq-xway-make-nand-actually-work.patch
@@ -0,0 +1,122 @@
+From cc77f36d2ea812027dc2a8a94c788c4c145f82dc Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 22 Oct 2012 10:25:39 +0200
+Subject: [PATCH 33/40] MTD: lantiq: xway: make nand actually work
+
+http://lists.infradead.org/pipermail/linux-mtd/2012-September/044240.html
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/mtd/nand/xway_nand.c | 54 +++++++++++++++++++++++++++++++++++-------
+ 1 file changed, 45 insertions(+), 9 deletions(-)
+
+diff --git a/drivers/mtd/nand/xway_nand.c b/drivers/mtd/nand/xway_nand.c
+index 3f81dc8..49b2e47 100644
+--- a/drivers/mtd/nand/xway_nand.c
++++ b/drivers/mtd/nand/xway_nand.c
+@@ -54,19 +54,29 @@
+ #define NAND_CON_CSMUX (1 << 1)
+ #define NAND_CON_NANDM 1
+
++static u32 xway_latchcmd;
++
+ static void xway_reset_chip(struct nand_chip *chip)
+ {
+ unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
+ unsigned long flags;
++ unsigned long timeout;
+
+ nandaddr &= ~NAND_WRITE_ADDR;
+ nandaddr |= NAND_WRITE_CMD;
+
+ /* finish with a reset */
++ timeout = jiffies + msecs_to_jiffies(200);
++
+ spin_lock_irqsave(&ebu_lock, flags);
++
+ writeb(NAND_WRITE_CMD_RESET, (void __iomem *) nandaddr);
+- while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
+- ;
++ do {
++ if ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
++ break;
++ cond_resched();
++ } while (!time_after_eq(jiffies, timeout));
++
+ spin_unlock_irqrestore(&ebu_lock, flags);
+ }
+
+@@ -94,17 +104,15 @@ static void xway_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+ unsigned long flags;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+- nandaddr &= ~(NAND_WRITE_CMD | NAND_WRITE_ADDR);
+ if (ctrl & NAND_CLE)
+- nandaddr |= NAND_WRITE_CMD;
+- else
+- nandaddr |= NAND_WRITE_ADDR;
+- this->IO_ADDR_W = (void __iomem *) nandaddr;
++ xway_latchcmd = NAND_WRITE_CMD;
++ else if (ctrl & NAND_ALE)
++ xway_latchcmd = NAND_WRITE_ADDR;
+ }
+
+ if (cmd != NAND_CMD_NONE) {
+ spin_lock_irqsave(&ebu_lock, flags);
+- writeb(cmd, this->IO_ADDR_W);
++ writeb(cmd, (void __iomem *) (nandaddr | xway_latchcmd));
+ while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
+ ;
+ spin_unlock_irqrestore(&ebu_lock, flags);
+@@ -124,12 +132,38 @@ static unsigned char xway_read_byte(struct mtd_info *mtd)
+ int ret;
+
+ spin_lock_irqsave(&ebu_lock, flags);
+- ret = ltq_r8((void __iomem *)(nandaddr + NAND_READ_DATA));
++ ret = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA));
+ spin_unlock_irqrestore(&ebu_lock, flags);
+
+ return ret;
+ }
+
++static void xway_read_buf(struct mtd_info *mtd, u_char *buf, int len)
++{
++ struct nand_chip *this = mtd->priv;
++ unsigned long nandaddr = (unsigned long) this->IO_ADDR_R;
++ unsigned long flags;
++ int i;
++
++ spin_lock_irqsave(&ebu_lock, flags);
++ for (i = 0; i < len; i++)
++ buf[i] = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA));
++ spin_unlock_irqrestore(&ebu_lock, flags);
++}
++
++static void xway_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
++{
++ struct nand_chip *this = mtd->priv;
++ unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
++ unsigned long flags;
++ int i;
++
++ spin_lock_irqsave(&ebu_lock, flags);
++ for (i = 0; i < len; i++)
++ ltq_w8(buf[i], (void __iomem *)nandaddr);
++ spin_unlock_irqrestore(&ebu_lock, flags);
++}
++
+ static int xway_nand_probe(struct platform_device *pdev)
+ {
+ struct nand_chip *this = platform_get_drvdata(pdev);
+@@ -175,6 +209,8 @@ static struct platform_nand_data xway_nand_data = {
+ .dev_ready = xway_dev_ready,
+ .select_chip = xway_select_chip,
+ .read_byte = xway_read_byte,
++ .read_buf = xway_read_buf,
++ .write_buf = xway_write_buf,
+ }
+ };
+
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0034-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch b/target/linux/lantiq/patches-3.8/0034-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
new file mode 100644
index 0000000..1732ed9
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0034-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
@@ -0,0 +1,29 @@
+From 88bc909507f7e9347a24e38185a11a38e51cc773 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 13 Mar 2013 10:04:34 +0100
+Subject: [PATCH 34/40] MTD: lantiq: handle NO_XIP on cfi0001 flash
+
+---
+ drivers/mtd/maps/lantiq-flash.c | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c
+index 3c3c791..343cfaa 100644
+--- a/drivers/mtd/maps/lantiq-flash.c
++++ b/drivers/mtd/maps/lantiq-flash.c
+@@ -134,7 +134,11 @@ ltq_mtd_probe(struct platform_device *pdev)
+ }
+
+ ltq_mtd->map = kzalloc(sizeof(struct map_info), GFP_KERNEL);
+- ltq_mtd->map->phys = ltq_mtd->res->start;
++ if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL))
++ ltq_mtd->map->phys = NO_XIP;
++ else
++ ltq_mtd->map->phys = ltq_mtd->res->start;
++ ltq_mtd->res->start;
+ ltq_mtd->map->size = resource_size(ltq_mtd->res);
+ ltq_mtd->map->virt = devm_request_and_ioremap(&pdev->dev, ltq_mtd->res);
+ if (!ltq_mtd->map->virt) {
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0035-owrt-generic-dtb-image-hack.patch b/target/linux/lantiq/patches-3.8/0035-owrt-generic-dtb-image-hack.patch
new file mode 100644
index 0000000..0b49cc9
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0035-owrt-generic-dtb-image-hack.patch
@@ -0,0 +1,26 @@
+From d9e7323db95818a92fc38e47e386ffb1a6fead5d Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 13 Mar 2013 09:34:03 +0100
+Subject: [PATCH 35/40] owrt: generic dtb image hack
+
+---
+ arch/mips/kernel/head.S | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
+index fcf9731..dc7fa6e 100644
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -140,6 +140,9 @@ FEXPORT(__kernel_entry)
+ j kernel_entry
+ #endif
+
++ .ascii "OWRTDTB:"
++ EXPORT(__image_dtb)
++ .fill 0x4000
+ __REF
+
+ NESTED(kernel_entry, 16, sp) # kernel entry point
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0036-owrt-lantiq-dtb-image-hack.patch b/target/linux/lantiq/patches-3.8/0036-owrt-lantiq-dtb-image-hack.patch
new file mode 100644
index 0000000..9fd7deb
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0036-owrt-lantiq-dtb-image-hack.patch
@@ -0,0 +1,48 @@
+From 5128799df668a7ff5b2861fab39f9f788369eb43 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 13 Mar 2013 09:36:16 +0100
+Subject: [PATCH 36/40] owrt: lantiq dtb image hack
+
+---
+ arch/mips/lantiq/Makefile | 2 --
+ arch/mips/lantiq/prom.c | 4 +++-
+ 2 files changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/arch/mips/lantiq/Makefile b/arch/mips/lantiq/Makefile
+index d6bdc57..690257a 100644
+--- a/arch/mips/lantiq/Makefile
++++ b/arch/mips/lantiq/Makefile
+@@ -6,8 +6,6 @@
+
+ obj-y := irq.o clk.o prom.o
+
+-obj-y += dts/
+-
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+ obj-$(CONFIG_SOC_TYPE_XWAY) += xway/
+diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
+index 9f9e875..72b183a 100644
+--- a/arch/mips/lantiq/prom.c
++++ b/arch/mips/lantiq/prom.c
+@@ -57,6 +57,8 @@ static void __init prom_init_cmdline(void)
+ }
+ }
+
++extern struct boot_param_header __image_dtb;
++
+ void __init plat_mem_setup(void)
+ {
+ ioport_resource.start = IOPORT_RESOURCE_START;
+@@ -70,7 +72,7 @@ void __init plat_mem_setup(void)
+ * Load the builtin devicetree. This causes the chosen node to be
+ * parsed resulting in our memory appearing
+ */
+- __dt_setup_arch(&__dtb_start);
++ __dt_setup_arch(&__image_dtb);
+ }
+
+ void __init device_tree_init(void)
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0037-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch b/target/linux/lantiq/patches-3.8/0037-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
new file mode 100644
index 0000000..4460961
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0037-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
@@ -0,0 +1,570 @@
+From 0c9b05716ac0e597ae0f81a96ff68e54716decc9 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 13 Mar 2013 10:02:58 +0100
+Subject: [PATCH 37/40] owrt: lantiq: wifi and ethernet eeprom handling
+
+---
+ arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h | 6 +
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 3 +
+ arch/mips/lantiq/xway/Makefile | 3 +
+ arch/mips/lantiq/xway/ath_eep.c | 206 ++++++++++++++++++++
+ arch/mips/lantiq/xway/eth_mac.c | 76 ++++++++
+ arch/mips/lantiq/xway/pci-ath-fixup.c | 109 +++++++++++
+ arch/mips/lantiq/xway/rt_eep.c | 60 ++++++
+ drivers/net/ethernet/lantiq_etop.c | 10 +-
+ 8 files changed, 469 insertions(+), 4 deletions(-)
+ create mode 100644 arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
+ create mode 100644 arch/mips/lantiq/xway/ath_eep.c
+ create mode 100644 arch/mips/lantiq/xway/eth_mac.c
+ create mode 100644 arch/mips/lantiq/xway/pci-ath-fixup.c
+ create mode 100644 arch/mips/lantiq/xway/rt_eep.c
+
+diff --git a/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h b/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
+new file mode 100644
+index 0000000..095d2619
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
+@@ -0,0 +1,6 @@
++#ifndef _PCI_ATH_FIXUP
++#define _PCI_ATH_FIXUP
++
++void ltq_pci_ath_fixup(unsigned slot, u16 *cal_data) __init;
++
++#endif /* _PCI_ATH_FIXUP */
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index 133336b..779715c 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -90,5 +90,8 @@ int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr);
+ extern void ltq_pmu_enable(unsigned int module);
+ extern void ltq_pmu_disable(unsigned int module);
+
++/* allow the ethernet driver to load a flash mapped mac addr */
++const u8* ltq_get_eth_mac(void);
++
+ #endif /* CONFIG_SOC_TYPE_XWAY */
+ #endif /* _LTQ_XWAY_H__ */
+diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
+index 087497d..51f0eba 100644
+--- a/arch/mips/lantiq/xway/Makefile
++++ b/arch/mips/lantiq/xway/Makefile
+@@ -1,3 +1,6 @@
+ obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
+
++obj-y += eth_mac.o
++obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o
++
+ obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
+diff --git a/arch/mips/lantiq/xway/ath_eep.c b/arch/mips/lantiq/xway/ath_eep.c
+new file mode 100644
+index 0000000..96da7c1
+--- /dev/null
++++ b/arch/mips/lantiq/xway/ath_eep.c
+@@ -0,0 +1,206 @@
++/*
++ * Copyright (C) 2011 Luca Olivetti <luca@ventoso.org>
++ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2011 Andrej Vlašić <andrej.vlasic0@gmail.com>
++ * Copyright (C) 2013 Álvaro Fernández Rojas <noltari@gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/etherdevice.h>
++#include <linux/ath5k_platform.h>
++#include <linux/ath9k_platform.h>
++#include <linux/pci.h>
++#include <pci-ath-fixup.h>
++
++extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev);
++struct ath5k_platform_data ath5k_pdata;
++struct ath9k_platform_data ath9k_pdata = {
++ .led_pin = -1,
++};
++static u16 ath5k_eeprom_data[ATH5K_PLAT_EEP_MAX_WORDS];
++static u8 athxk_eeprom_mac[6];
++
++static int ath9k_pci_plat_dev_init(struct pci_dev *dev)
++{
++ dev->dev.platform_data = &ath9k_pdata;
++ return 0;
++}
++
++int __init of_ath9k_eeprom_probe(struct platform_device *pdev)
++{
++ struct device_node *np = pdev->dev.of_node;
++ struct resource *eep_res, *mac_res;
++ void __iomem *eep, *mac;
++ int mac_offset;
++ u32 mac_inc = 0, pci_slot = 0;
++ int i;
++ u16 *eepdata, sum, el;
++
++ eep_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++
++ if (!eep_res) {
++ dev_err(&pdev->dev, "failed to load eeprom address\n");
++ return -ENODEV;
++ }
++ if (resource_size(eep_res) != ATH9K_PLAT_EEP_MAX_WORDS) {
++ dev_err(&pdev->dev, "eeprom has an invalid size\n");
++ return -EINVAL;
++ }
++
++ eep = ioremap(eep_res->start, resource_size(eep_res));
++ memcpy_fromio(ath9k_pdata.eeprom_data, eep, ATH9K_PLAT_EEP_MAX_WORDS);
++
++ if (of_find_property(np, "ath,eep-swap", NULL)) {
++ ath9k_pdata.endian_check = true;
++
++ dev_info(&pdev->dev, "endian check enabled.\n");
++ }
++
++ if (of_find_property(np, "ath,eep-csum", NULL)) {
++ sum = ath9k_pdata.eeprom_data[0x200>>1];
++ el = sum / sizeof(u16) - 2; /* skip length and (old) checksum */
++ eepdata = (u16 *) (&ath9k_pdata.eeprom_data[0x204>>1]); /* after checksum */
++ for (i = 0; i < el; i++)
++ sum ^= *eepdata++;
++ sum ^= 0xffff;
++ ath9k_pdata.eeprom_data[0x202>>1] = sum;
++
++ dev_info(&pdev->dev, "checksum fixed.\n");
++ }
++
++ if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) {
++ memcpy_fromio(athxk_eeprom_mac, (void*) ath9k_pdata.eeprom_data, 6);
++ } else if (mac_res) {
++ if (resource_size(mac_res) != 6) {
++ dev_err(&pdev->dev, "mac has an invalid size\n");
++ return -EINVAL;
++ }
++ mac = ioremap(mac_res->start, resource_size(mac_res));
++ memcpy_fromio(athxk_eeprom_mac, mac, 6);
++ } else {
++ dev_warn(&pdev->dev, "using random mac\n");
++ random_ether_addr(athxk_eeprom_mac);
++ }
++
++ if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
++ athxk_eeprom_mac[5] += mac_inc;
++
++ ath9k_pdata.macaddr = athxk_eeprom_mac;
++ ltq_pci_plat_dev_init = ath9k_pci_plat_dev_init;
++
++ if (!of_property_read_u32(np, "ath,pci-slot", &pci_slot)) {
++ ltq_pci_ath_fixup(pci_slot, ath9k_pdata.eeprom_data);
++
++ dev_info(&pdev->dev, "pci slot: %u\n", pci_slot);
++ }
++
++ dev_info(&pdev->dev, "loaded ath9k eeprom\n");
++
++ return 0;
++}
++
++static struct of_device_id ath9k_eeprom_ids[] = {
++ { .compatible = "ath9k,eeprom" },
++ { }
++};
++
++static struct platform_driver ath9k_eeprom_driver = {
++ .driver = {
++ .name = "ath9k,eeprom",
++ .owner = THIS_MODULE,
++ .of_match_table = of_match_ptr(ath9k_eeprom_ids),
++ },
++};
++
++static int __init of_ath9k_eeprom_init(void)
++{
++ return platform_driver_probe(&ath9k_eeprom_driver, of_ath9k_eeprom_probe);
++}
++arch_initcall(of_ath9k_eeprom_init);
++
++
++static int ath5k_pci_plat_dev_init(struct pci_dev *dev)
++{
++ dev->dev.platform_data = &ath5k_pdata;
++ return 0;
++}
++
++int __init of_ath5k_eeprom_probe(struct platform_device *pdev)
++{
++ struct device_node *np = pdev->dev.of_node;
++ struct resource *eep_res, *mac_res;
++ void __iomem *eep, *mac;
++ int mac_offset;
++ u32 mac_inc = 0;
++ int i;
++
++ eep_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++
++ if (!eep_res) {
++ dev_err(&pdev->dev, "failed to load eeprom address\n");
++ return -ENODEV;
++ }
++ if (resource_size(eep_res) != ATH5K_PLAT_EEP_MAX_WORDS) {
++ dev_err(&pdev->dev, "eeprom has an invalid size\n");
++ return -EINVAL;
++ }
++
++ eep = ioremap(eep_res->start, resource_size(eep_res));
++ memcpy_fromio(ath5k_eeprom_data, eep, ATH5K_PLAT_EEP_MAX_WORDS);
++
++ if (of_find_property(np, "ath,eep-swap", NULL))
++ for (i = 0; i < (ATH5K_PLAT_EEP_MAX_WORDS >> 1); i++)
++ ath5k_eeprom_data[i] = swab16(ath5k_eeprom_data[i]);
++
++ if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) {
++ memcpy_fromio(athxk_eeprom_mac, (void*) ath5k_eeprom_data, 6);
++ } else if (mac_res) {
++ if (resource_size(mac_res) != 6) {
++ dev_err(&pdev->dev, "mac has an invalid size\n");
++ return -EINVAL;
++ }
++ mac = ioremap(mac_res->start, resource_size(mac_res));
++ memcpy_fromio(athxk_eeprom_mac, mac, 6);
++ } else {
++ dev_warn(&pdev->dev, "using random mac\n");
++ random_ether_addr(athxk_eeprom_mac);
++ }
++
++ if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
++ athxk_eeprom_mac[5] += mac_inc;
++
++ ath5k_pdata.eeprom_data = ath5k_eeprom_data;
++ ath5k_pdata.macaddr = athxk_eeprom_mac;
++ ltq_pci_plat_dev_init = ath5k_pci_plat_dev_init;
++
++ dev_info(&pdev->dev, "loaded ath5k eeprom\n");
++
++ return 0;
++}
++
++static struct of_device_id ath5k_eeprom_ids[] = {
++ { .compatible = "ath5k,eeprom" },
++ { }
++};
++
++static struct platform_driver ath5k_eeprom_driver = {
++ .driver = {
++ .name = "ath5k,eeprom",
++ .owner = THIS_MODULE,
++ .of_match_table = of_match_ptr(ath5k_eeprom_ids),
++ },
++};
++
++static int __init of_ath5k_eeprom_init(void)
++{
++ return platform_driver_probe(&ath5k_eeprom_driver, of_ath5k_eeprom_probe);
++}
++device_initcall(of_ath5k_eeprom_init);
+diff --git a/arch/mips/lantiq/xway/eth_mac.c b/arch/mips/lantiq/xway/eth_mac.c
+new file mode 100644
+index 0000000..d288a0e
+--- /dev/null
++++ b/arch/mips/lantiq/xway/eth_mac.c
+@@ -0,0 +1,76 @@
++/*
++ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/of_platform.h>
++#include <linux/if_ether.h>
++
++static u8 eth_mac[6];
++static int eth_mac_set;
++
++const u8* ltq_get_eth_mac(void)
++{
++ return eth_mac;
++}
++
++static int __init setup_ethaddr(char *str)
++{
++ eth_mac_set = mac_pton(str, eth_mac);
++ return !eth_mac_set;
++}
++__setup("ethaddr=", setup_ethaddr);
++
++int __init of_eth_mac_probe(struct platform_device *pdev)
++{
++ struct device_node *np = pdev->dev.of_node;
++ struct resource *mac_res;
++ void __iomem *mac;
++ u32 mac_inc = 0;
++
++ if (eth_mac_set) {
++ dev_err(&pdev->dev, "mac was already set by bootloader\n");
++ return -EINVAL;
++ }
++ mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++
++ if (!mac_res) {
++ dev_err(&pdev->dev, "failed to load mac\n");
++ return -EINVAL;
++ }
++ if (resource_size(mac_res) != 6) {
++ dev_err(&pdev->dev, "mac has an invalid size\n");
++ return -EINVAL;
++ }
++ mac = ioremap(mac_res->start, resource_size(mac_res));
++ memcpy_fromio(eth_mac, mac, 6);
++
++ if (!of_property_read_u32(np, "mac-increment", &mac_inc))
++ eth_mac[5] += mac_inc;
++
++ return 0;
++}
++
++static struct of_device_id eth_mac_ids[] = {
++ { .compatible = "lantiq,eth-mac" },
++ { /* sentinel */ }
++};
++
++static struct platform_driver eth_mac_driver = {
++ .driver = {
++ .name = "lantiq,eth-mac",
++ .owner = THIS_MODULE,
++ .of_match_table = of_match_ptr(eth_mac_ids),
++ },
++};
++
++static int __init of_eth_mac_init(void)
++{
++ return platform_driver_probe(&eth_mac_driver, of_eth_mac_probe);
++}
++device_initcall(of_eth_mac_init);
+diff --git a/arch/mips/lantiq/xway/pci-ath-fixup.c b/arch/mips/lantiq/xway/pci-ath-fixup.c
+new file mode 100644
+index 0000000..c87ffb2
+--- /dev/null
++++ b/arch/mips/lantiq/xway/pci-ath-fixup.c
+@@ -0,0 +1,109 @@
++/*
++ * Atheros AP94 reference board PCI initialization
++ *
++ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <lantiq_soc.h>
++
++#define LTQ_PCI_MEM_BASE 0x18000000
++
++struct ath_fixup {
++ u16 *cal_data;
++ unsigned slot;
++};
++
++static int ath_num_fixups;
++static struct ath_fixup ath_fixups[2];
++
++static void ath_pci_fixup(struct pci_dev *dev)
++{
++ void __iomem *mem;
++ u16 *cal_data = NULL;
++ u16 cmd;
++ u32 bar0;
++ u32 val;
++ unsigned i;
++
++ for (i = 0; i < ath_num_fixups; i++) {
++ if (ath_fixups[i].cal_data == NULL)
++ continue;
++
++ if (ath_fixups[i].slot != PCI_SLOT(dev->devfn))
++ continue;
++
++ cal_data = ath_fixups[i].cal_data;
++ break;
++ }
++
++ if (cal_data == NULL)
++ return;
++
++ if (*cal_data != 0xa55a) {
++ pr_err("pci %s: invalid calibration data\n", pci_name(dev));
++ return;
++ }
++
++ pr_info("pci %s: fixup device configuration\n", pci_name(dev));
++
++ mem = ioremap(LTQ_PCI_MEM_BASE, 0x10000);
++ if (!mem) {
++ pr_err("pci %s: ioremap error\n", pci_name(dev));
++ return;
++ }
++
++ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
++ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, LTQ_PCI_MEM_BASE);
++ pci_read_config_word(dev, PCI_COMMAND, &cmd);
++ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
++ pci_write_config_word(dev, PCI_COMMAND, cmd);
++
++ /* set pointer to first reg address */
++ cal_data += 3;
++ while (*cal_data != 0xffff) {
++ u32 reg;
++ reg = *cal_data++;
++ val = *cal_data++;
++ val |= (*cal_data++) << 16;
++
++ ltq_w32(swab32(val), mem + reg);
++ udelay(100);
++ }
++
++ pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
++ dev->vendor = val & 0xffff;
++ dev->device = (val >> 16) & 0xffff;
++
++ pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
++ dev->revision = val & 0xff;
++ dev->class = val >> 8; /* upper 3 bytes */
++
++ pr_info("pci %s: fixup info: [%04x:%04x] revision %02x class %#08x\n",
++ pci_name(dev), dev->vendor, dev->device, dev->revision, dev->class);
++
++ pci_read_config_word(dev, PCI_COMMAND, &cmd);
++ cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
++ pci_write_config_word(dev, PCI_COMMAND, cmd);
++
++ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
++
++ iounmap(mem);
++}
++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath_pci_fixup);
++
++void __init ltq_pci_ath_fixup(unsigned slot, u16 *cal_data)
++{
++ if (ath_num_fixups >= ARRAY_SIZE(ath_fixups))
++ return;
++
++ ath_fixups[ath_num_fixups].slot = slot;
++ ath_fixups[ath_num_fixups].cal_data = cal_data;
++ ath_num_fixups++;
++}
+diff --git a/arch/mips/lantiq/xway/rt_eep.c b/arch/mips/lantiq/xway/rt_eep.c
+new file mode 100644
+index 0000000..00f2d4c
+--- /dev/null
++++ b/arch/mips/lantiq/xway/rt_eep.c
+@@ -0,0 +1,60 @@
++/*
++ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/pci.h>
++#include <linux/platform_device.h>
++#include <linux/rt2x00_platform.h>
++
++extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev);
++static struct rt2x00_platform_data rt2x00_pdata;
++
++static int rt2x00_pci_plat_dev_init(struct pci_dev *dev)
++{
++ dev->dev.platform_data = &rt2x00_pdata;
++ return 0;
++}
++
++int __init of_ralink_eeprom_probe(struct platform_device *pdev)
++{
++ struct device_node *np = pdev->dev.of_node;
++ const char *eeprom;
++
++ if (of_property_read_string(np, "ralink,eeprom", &eeprom)) {
++ dev_err(&pdev->dev, "failed to load eeprom filename\n");
++ return 0;
++ }
++
++ rt2x00_pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL);
++// rt2x00_pdata.mac_address = mac;
++ ltq_pci_plat_dev_init = rt2x00_pci_plat_dev_init;
++
++ dev_info(&pdev->dev, "using %s as eeprom\n", eeprom);
++
++ return 0;
++}
++
++static struct of_device_id ralink_eeprom_ids[] = {
++ { .compatible = "ralink,eeprom" },
++ { }
++};
++
++static struct platform_driver ralink_eeprom_driver = {
++ .driver = {
++ .name = "ralink,eeprom",
++ .owner = THIS_MODULE,
++ .of_match_table = of_match_ptr(ralink_eeprom_ids),
++ },
++};
++
++static int __init of_ralink_eeprom_init(void)
++{
++ return platform_driver_probe(&ralink_eeprom_driver, of_ralink_eeprom_probe);
++}
++device_initcall(of_ralink_eeprom_init);
+diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
+index 91a37f1..fa23a7e 100644
+--- a/drivers/net/ethernet/lantiq_etop.c
++++ b/drivers/net/ethernet/lantiq_etop.c
+@@ -826,7 +826,8 @@ ltq_etop_init(struct net_device *dev)
+
+ ltq_etop_change_mtu(dev, 1500);
+
+- memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
++ if (priv->mac)
++ memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
+ if (!is_valid_ether_addr(mac.sa_data)) {
+ pr_warn("etop: invalid MAC, using random\n");
+ random_ether_addr(mac.sa_data);
+@@ -885,8 +886,7 @@ static const struct net_device_ops ltq_eth_netdev_ops = {
+ .ndo_tx_timeout = ltq_etop_tx_timeout,
+ };
+
+-static int __devinit
+-ltq_etop_probe(struct platform_device *pdev)
++static int ltq_etop_probe(struct platform_device *pdev)
+ {
+ struct net_device *dev;
+ struct ltq_etop_priv *priv;
+@@ -950,7 +950,9 @@ ltq_etop_probe(struct platform_device *pdev)
+ priv->tx_irq = irqres[0].start;
+ priv->rx_irq = irqres[1].start;
+ priv->mii_mode = of_get_phy_mode(pdev->dev.of_node);
+- priv->mac = of_get_mac_address(pdev->dev.of_node);
++ priv->mac = ltq_get_eth_mac();
++ if (!priv->mac)
++ priv->mac = of_get_mac_address(pdev->dev.of_node);
+
+ priv->clk_ppe = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(priv->clk_ppe))
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0038-owrt-lantiq-handle-vmmc-memory-reservation.patch b/target/linux/lantiq/patches-3.8/0038-owrt-lantiq-handle-vmmc-memory-reservation.patch
new file mode 100644
index 0000000..a3129df
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0038-owrt-lantiq-handle-vmmc-memory-reservation.patch
@@ -0,0 +1,95 @@
+From 6af001cc662f4aa3740c550ac43c6b6f75df67c8 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 13 Mar 2013 10:04:01 +0100
+Subject: [PATCH 38/40] owrt: lantiq: handle vmmc memory reservation
+
+---
+ arch/mips/lantiq/xway/Makefile | 2 +-
+ arch/mips/lantiq/xway/vmmc.c | 63 ++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 64 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/lantiq/xway/vmmc.c
+
+diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
+index 51f0eba..3a01d22 100644
+--- a/arch/mips/lantiq/xway/Makefile
++++ b/arch/mips/lantiq/xway/Makefile
+@@ -1,6 +1,6 @@
+ obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
+
+-obj-y += eth_mac.o
++obj-y += eth_mac.o vmmc.o
+ obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o
+
+ obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
+diff --git a/arch/mips/lantiq/xway/vmmc.c b/arch/mips/lantiq/xway/vmmc.c
+new file mode 100644
+index 0000000..6dedf77
+--- /dev/null
++++ b/arch/mips/lantiq/xway/vmmc.c
+@@ -0,0 +1,63 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/of_platform.h>
++#include <linux/of_gpio.h>
++#include <linux/dma-mapping.h>
++
++#include <lantiq_soc.h>
++
++static unsigned int *cp1_base = 0;
++unsigned int* ltq_get_cp1_base(void)
++{
++ if (!cp1_base)
++ panic("no cp1 base was set\n");
++ return cp1_base;
++}
++EXPORT_SYMBOL(ltq_get_cp1_base);
++
++static int vmmc_probe(struct platform_device *pdev)
++{
++#define CP1_SIZE (1 << 20)
++ int gpio_count;
++ dma_addr_t dma;
++ cp1_base =
++ (void*)CPHYSADDR(dma_alloc_coherent(NULL, CP1_SIZE, &dma, GFP_ATOMIC));
++
++ gpio_count = of_gpio_count(pdev->dev.of_node);
++ while (gpio_count) {
++ enum of_gpio_flags flags;
++ int gpio = of_get_gpio_flags(pdev->dev.of_node, --gpio_count, &flags);
++ if (gpio_request(gpio, "vmmc-relay"))
++ continue;
++ dev_info(&pdev->dev, "requested GPIO %d\n", gpio);
++ gpio_direction_output(gpio, (flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1));
++ }
++
++ dev_info(&pdev->dev, "reserved %dMB at 0x%p", CP1_SIZE >> 20, cp1_base);
++
++ return 0;
++}
++
++static const struct of_device_id vmmc_match[] = {
++ { .compatible = "lantiq,vmmc" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, vmmc_match);
++
++static struct platform_driver vmmc_driver = {
++ .probe = vmmc_probe,
++ .driver = {
++ .name = "lantiq,vmmc",
++ .owner = THIS_MODULE,
++ .of_match_table = vmmc_match,
++ },
++};
++
++module_platform_driver(vmmc_driver);
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0039-owrt-lantiq-backport-old-timer-code.patch b/target/linux/lantiq/patches-3.8/0039-owrt-lantiq-backport-old-timer-code.patch
new file mode 100644
index 0000000..06bad03
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0039-owrt-lantiq-backport-old-timer-code.patch
@@ -0,0 +1,1038 @@
+From 225313fe4112a487954e7f7e3be995854b7c9ffa Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 13 Mar 2013 10:01:49 +0100
+Subject: [PATCH 39/40] owrt: lantiq: backport old timer code
+
+---
+ arch/mips/include/asm/mach-lantiq/lantiq_timer.h | 155 ++++
+ arch/mips/lantiq/xway/Makefile | 2 +-
+ arch/mips/lantiq/xway/timer.c | 845 ++++++++++++++++++++++
+ 3 files changed, 1001 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_timer.h
+ create mode 100644 arch/mips/lantiq/xway/timer.c
+
+diff --git a/arch/mips/include/asm/mach-lantiq/lantiq_timer.h b/arch/mips/include/asm/mach-lantiq/lantiq_timer.h
+new file mode 100644
+index 0000000..ef564ab
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/lantiq_timer.h
+@@ -0,0 +1,155 @@
++#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
++#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
++
++
++/******************************************************************************
++ Copyright (c) 2002, Infineon Technologies. All rights reserved.
++
++ No Warranty
++ Because the program is licensed free of charge, there is no warranty for
++ the program, to the extent permitted by applicable law. Except when
++ otherwise stated in writing the copyright holders and/or other parties
++ provide the program "as is" without warranty of any kind, either
++ expressed or implied, including, but not limited to, the implied
++ warranties of merchantability and fitness for a particular purpose. The
++ entire risk as to the quality and performance of the program is with
++ you. should the program prove defective, you assume the cost of all
++ necessary servicing, repair or correction.
++
++ In no event unless required by applicable law or agreed to in writing
++ will any copyright holder, or any other party who may modify and/or
++ redistribute the program as permitted above, be liable to you for
++ damages, including any general, special, incidental or consequential
++ damages arising out of the use or inability to use the program
++ (including but not limited to loss of data or data being rendered
++ inaccurate or losses sustained by you or third parties or a failure of
++ the program to operate with any other programs), even if such holder or
++ other party has been advised of the possibility of such damages.
++******************************************************************************/
++
++
++/*
++ * ####################################
++ * Definition
++ * ####################################
++ */
++
++/*
++ * Available Timer/Counter Index
++ */
++#define TIMER(n, X) (n * 2 + (X ? 1 : 0))
++#define TIMER_ANY 0x00
++#define TIMER1A TIMER(1, 0)
++#define TIMER1B TIMER(1, 1)
++#define TIMER2A TIMER(2, 0)
++#define TIMER2B TIMER(2, 1)
++#define TIMER3A TIMER(3, 0)
++#define TIMER3B TIMER(3, 1)
++
++/*
++ * Flag of Timer/Counter
++ * These flags specify the way in which timer is configured.
++ */
++/* Bit size of timer/counter. */
++#define TIMER_FLAG_16BIT 0x0000
++#define TIMER_FLAG_32BIT 0x0001
++/* Switch between timer and counter. */
++#define TIMER_FLAG_TIMER 0x0000
++#define TIMER_FLAG_COUNTER 0x0002
++/* Stop or continue when overflowing/underflowing. */
++#define TIMER_FLAG_ONCE 0x0000
++#define TIMER_FLAG_CYCLIC 0x0004
++/* Count up or counter down. */
++#define TIMER_FLAG_UP 0x0000
++#define TIMER_FLAG_DOWN 0x0008
++/* Count on specific level or edge. */
++#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000
++#define TIMER_FLAG_LOW_LEVEL_SENSITIVE 0x0040
++#define TIMER_FLAG_RISE_EDGE 0x0010
++#define TIMER_FLAG_FALL_EDGE 0x0020
++#define TIMER_FLAG_ANY_EDGE 0x0030
++/* Signal is syncronous to module clock or not. */
++#define TIMER_FLAG_UNSYNC 0x0000
++#define TIMER_FLAG_SYNC 0x0080
++/* Different interrupt handle type. */
++#define TIMER_FLAG_NO_HANDLE 0x0000
++#if defined(__KERNEL__)
++ #define TIMER_FLAG_CALLBACK_IN_IRQ 0x0100
++#endif // defined(__KERNEL__)
++#define TIMER_FLAG_SIGNAL 0x0300
++/* Internal clock source or external clock source */
++#define TIMER_FLAG_INT_SRC 0x0000
++#define TIMER_FLAG_EXT_SRC 0x1000
++
++
++/*
++ * ioctl Command
++ */
++#define GPTU_REQUEST_TIMER 0x01 /* General method to setup timer/counter. */
++#define GPTU_FREE_TIMER 0x02 /* Free timer/counter. */
++#define GPTU_START_TIMER 0x03 /* Start or resume timer/counter. */
++#define GPTU_STOP_TIMER 0x04 /* Suspend timer/counter. */
++#define GPTU_GET_COUNT_VALUE 0x05 /* Get current count value. */
++#define GPTU_CALCULATE_DIVIDER 0x06 /* Calculate timer divider from given freq.*/
++#define GPTU_SET_TIMER 0x07 /* Simplified method to setup timer. */
++#define GPTU_SET_COUNTER 0x08 /* Simplified method to setup counter. */
++
++/*
++ * Data Type Used to Call ioctl
++ */
++struct gptu_ioctl_param {
++ unsigned int timer; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and *
++ * GPTU_SET_COUNTER, this field is ID of expected *
++ * timer/counter. If it's zero, a timer/counter would *
++ * be dynamically allocated and ID would be stored in *
++ * this field. *
++ * In command GPTU_GET_COUNT_VALUE, this field is *
++ * ignored. *
++ * In other command, this field is ID of timer/counter *
++ * allocated. */
++ unsigned int flag; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and *
++ * GPTU_SET_COUNTER, this field contains flags to *
++ * specify how to configure timer/counter. *
++ * In command GPTU_START_TIMER, zero indicate start *
++ * and non-zero indicate resume timer/counter. *
++ * In other command, this field is ignored. */
++ unsigned long value; /* In command GPTU_REQUEST_TIMER, this field contains *
++ * init/reload value. *
++ * In command GPTU_SET_TIMER, this field contains *
++ * frequency (0.001Hz) of timer. *
++ * In command GPTU_GET_COUNT_VALUE, current count *
++ * value would be stored in this field. *
++ * In command GPTU_CALCULATE_DIVIDER, this field *
++ * contains frequency wanted, and after calculation, *
++ * divider would be stored in this field to overwrite *
++ * the frequency. *
++ * In other command, this field is ignored. */
++ int pid; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, *
++ * if signal is required, this field contains process *
++ * ID to which signal would be sent. *
++ * In other command, this field is ignored. */
++ int sig; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, *
++ * if signal is required, this field contains signal *
++ * number which would be sent. *
++ * In other command, this field is ignored. */
++};
++
++/*
++ * ####################################
++ * Data Type
++ * ####################################
++ */
++typedef void (*timer_callback)(unsigned long arg);
++
++extern int lq_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long);
++extern int lq_free_timer(unsigned int);
++extern int lq_start_timer(unsigned int, int);
++extern int lq_stop_timer(unsigned int);
++extern int lq_reset_counter_flags(u32 timer, u32 flags);
++extern int lq_get_count_value(unsigned int, unsigned long *);
++extern u32 lq_cal_divider(unsigned long);
++extern int lq_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long);
++extern int lq_set_counter(unsigned int timer, unsigned int flag,
++ u32 reload, unsigned long arg1, unsigned long arg2);
++
++#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */
+diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
+index 3a01d22..ea8706f 100644
+--- a/arch/mips/lantiq/xway/Makefile
++++ b/arch/mips/lantiq/xway/Makefile
+@@ -1,4 +1,4 @@
+-obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
++obj-y := prom.o sysctrl.o clk.o reset.o dma.o timer.o dcdc.o
+
+ obj-y += eth_mac.o vmmc.o
+ obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o
+diff --git a/arch/mips/lantiq/xway/timer.c b/arch/mips/lantiq/xway/timer.c
+new file mode 100644
+index 0000000..1c0fdb8
+--- /dev/null
++++ b/arch/mips/lantiq/xway/timer.c
+@@ -0,0 +1,845 @@
++#ifndef CONFIG_SOC_AMAZON_SE
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/version.h>
++#include <linux/types.h>
++#include <linux/fs.h>
++#include <linux/miscdevice.h>
++#include <linux/init.h>
++#include <linux/uaccess.h>
++#include <linux/unistd.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/sched.h>
++
++#include <asm/irq.h>
++#include <asm/div64.h>
++#include "../clk.h"
++
++#include <lantiq_soc.h>
++#include <lantiq_irq.h>
++#include <lantiq_timer.h>
++
++#define MAX_NUM_OF_32BIT_TIMER_BLOCKS 6
++
++#ifdef TIMER1A
++#define FIRST_TIMER TIMER1A
++#else
++#define FIRST_TIMER 2
++#endif
++
++/*
++ * GPTC divider is set or not.
++ */
++#define GPTU_CLC_RMC_IS_SET 0
++
++/*
++ * Timer Interrupt (IRQ)
++ */
++/* Must be adjusted when ICU driver is available */
++#define TIMER_INTERRUPT (INT_NUM_IM3_IRL0 + 22)
++
++/*
++ * Bits Operation
++ */
++#define GET_BITS(x, msb, lsb) \
++ (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
++#define SET_BITS(x, msb, lsb, value) \
++ (((x) & ~(((1 << ((msb) + 1)) - 1) ^ ((1 << (lsb)) - 1))) | \
++ (((value) & ((1 << (1 + (msb) - (lsb))) - 1)) << (lsb)))
++
++/*
++ * GPTU Register Mapping
++ */
++#define LQ_GPTU (KSEG1 + 0x1E100A00)
++#define LQ_GPTU_CLC ((volatile u32 *)(LQ_GPTU + 0x0000))
++#define LQ_GPTU_ID ((volatile u32 *)(LQ_GPTU + 0x0008))
++#define LQ_GPTU_CON(n, X) ((volatile u32 *)(LQ_GPTU + 0x0010 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */
++#define LQ_GPTU_RUN(n, X) ((volatile u32 *)(LQ_GPTU + 0x0018 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */
++#define LQ_GPTU_RELOAD(n, X) ((volatile u32 *)(LQ_GPTU + 0x0020 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */
++#define LQ_GPTU_COUNT(n, X) ((volatile u32 *)(LQ_GPTU + 0x0028 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */
++#define LQ_GPTU_IRNEN ((volatile u32 *)(LQ_GPTU + 0x00F4))
++#define LQ_GPTU_IRNICR ((volatile u32 *)(LQ_GPTU + 0x00F8))
++#define LQ_GPTU_IRNCR ((volatile u32 *)(LQ_GPTU + 0x00FC))
++
++/*
++ * Clock Control Register
++ */
++#define GPTU_CLC_SMC GET_BITS(*LQ_GPTU_CLC, 23, 16)
++#define GPTU_CLC_RMC GET_BITS(*LQ_GPTU_CLC, 15, 8)
++#define GPTU_CLC_FSOE (*LQ_GPTU_CLC & (1 << 5))
++#define GPTU_CLC_EDIS (*LQ_GPTU_CLC & (1 << 3))
++#define GPTU_CLC_SPEN (*LQ_GPTU_CLC & (1 << 2))
++#define GPTU_CLC_DISS (*LQ_GPTU_CLC & (1 << 1))
++#define GPTU_CLC_DISR (*LQ_GPTU_CLC & (1 << 0))
++
++#define GPTU_CLC_SMC_SET(value) SET_BITS(0, 23, 16, (value))
++#define GPTU_CLC_RMC_SET(value) SET_BITS(0, 15, 8, (value))
++#define GPTU_CLC_FSOE_SET(value) ((value) ? (1 << 5) : 0)
++#define GPTU_CLC_SBWE_SET(value) ((value) ? (1 << 4) : 0)
++#define GPTU_CLC_EDIS_SET(value) ((value) ? (1 << 3) : 0)
++#define GPTU_CLC_SPEN_SET(value) ((value) ? (1 << 2) : 0)
++#define GPTU_CLC_DISR_SET(value) ((value) ? (1 << 0) : 0)
++
++/*
++ * ID Register
++ */
++#define GPTU_ID_ID GET_BITS(*LQ_GPTU_ID, 15, 8)
++#define GPTU_ID_CFG GET_BITS(*LQ_GPTU_ID, 7, 5)
++#define GPTU_ID_REV GET_BITS(*LQ_GPTU_ID, 4, 0)
++
++/*
++ * Control Register of Timer/Counter nX
++ * n is the index of block (1 based index)
++ * X is either A or B
++ */
++#define GPTU_CON_SRC_EG(n, X) (*LQ_GPTU_CON(n, X) & (1 << 10))
++#define GPTU_CON_SRC_EXT(n, X) (*LQ_GPTU_CON(n, X) & (1 << 9))
++#define GPTU_CON_SYNC(n, X) (*LQ_GPTU_CON(n, X) & (1 << 8))
++#define GPTU_CON_EDGE(n, X) GET_BITS(*LQ_GPTU_CON(n, X), 7, 6)
++#define GPTU_CON_INV(n, X) (*LQ_GPTU_CON(n, X) & (1 << 5))
++#define GPTU_CON_EXT(n, X) (*LQ_GPTU_CON(n, A) & (1 << 4)) /* Timer/Counter B does not have this bit */
++#define GPTU_CON_STP(n, X) (*LQ_GPTU_CON(n, X) & (1 << 3))
++#define GPTU_CON_CNT(n, X) (*LQ_GPTU_CON(n, X) & (1 << 2))
++#define GPTU_CON_DIR(n, X) (*LQ_GPTU_CON(n, X) & (1 << 1))
++#define GPTU_CON_EN(n, X) (*LQ_GPTU_CON(n, X) & (1 << 0))
++
++#define GPTU_CON_SRC_EG_SET(value) ((value) ? 0 : (1 << 10))
++#define GPTU_CON_SRC_EXT_SET(value) ((value) ? (1 << 9) : 0)
++#define GPTU_CON_SYNC_SET(value) ((value) ? (1 << 8) : 0)
++#define GPTU_CON_EDGE_SET(value) SET_BITS(0, 7, 6, (value))
++#define GPTU_CON_INV_SET(value) ((value) ? (1 << 5) : 0)
++#define GPTU_CON_EXT_SET(value) ((value) ? (1 << 4) : 0)
++#define GPTU_CON_STP_SET(value) ((value) ? (1 << 3) : 0)
++#define GPTU_CON_CNT_SET(value) ((value) ? (1 << 2) : 0)
++#define GPTU_CON_DIR_SET(value) ((value) ? (1 << 1) : 0)
++
++#define GPTU_RUN_RL_SET(value) ((value) ? (1 << 2) : 0)
++#define GPTU_RUN_CEN_SET(value) ((value) ? (1 << 1) : 0)
++#define GPTU_RUN_SEN_SET(value) ((value) ? (1 << 0) : 0)
++
++#define GPTU_IRNEN_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0)
++#define GPTU_IRNCR_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0)
++
++#define TIMER_FLAG_MASK_SIZE(x) (x & 0x0001)
++#define TIMER_FLAG_MASK_TYPE(x) (x & 0x0002)
++#define TIMER_FLAG_MASK_STOP(x) (x & 0x0004)
++#define TIMER_FLAG_MASK_DIR(x) (x & 0x0008)
++#define TIMER_FLAG_NONE_EDGE 0x0000
++#define TIMER_FLAG_MASK_EDGE(x) (x & 0x0030)
++#define TIMER_FLAG_REAL 0x0000
++#define TIMER_FLAG_INVERT 0x0040
++#define TIMER_FLAG_MASK_INVERT(x) (x & 0x0040)
++#define TIMER_FLAG_MASK_TRIGGER(x) (x & 0x0070)
++#define TIMER_FLAG_MASK_SYNC(x) (x & 0x0080)
++#define TIMER_FLAG_CALLBACK_IN_HB 0x0200
++#define TIMER_FLAG_MASK_HANDLE(x) (x & 0x0300)
++#define TIMER_FLAG_MASK_SRC(x) (x & 0x1000)
++
++struct timer_dev_timer {
++ unsigned int f_irq_on;
++ unsigned int irq;
++ unsigned int flag;
++ unsigned long arg1;
++ unsigned long arg2;
++};
++
++struct timer_dev {
++ struct mutex gptu_mutex;
++ unsigned int number_of_timers;
++ unsigned int occupation;
++ unsigned int f_gptu_on;
++ struct timer_dev_timer timer[MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2];
++};
++
++
++unsigned int ltq_get_fpi_bus_clock(int fpi) {
++ struct clk *clk = clk_get_fpi();
++ return clk_get_rate(clk);
++}
++
++
++static long gptu_ioctl(struct file *, unsigned int, unsigned long);
++static int gptu_open(struct inode *, struct file *);
++static int gptu_release(struct inode *, struct file *);
++
++static struct file_operations gptu_fops = {
++ .owner = THIS_MODULE,
++ .unlocked_ioctl = gptu_ioctl,
++ .open = gptu_open,
++ .release = gptu_release
++};
++
++static struct miscdevice gptu_miscdev = {
++ .minor = MISC_DYNAMIC_MINOR,
++ .name = "gptu",
++ .fops = &gptu_fops,
++};
++
++static struct timer_dev timer_dev;
++
++static irqreturn_t timer_irq_handler(int irq, void *p)
++{
++ unsigned int timer;
++ unsigned int flag;
++ struct timer_dev_timer *dev_timer = (struct timer_dev_timer *)p;
++
++ timer = irq - TIMER_INTERRUPT;
++ if (timer < timer_dev.number_of_timers
++ && dev_timer == &timer_dev.timer[timer]) {
++ /* Clear interrupt. */
++ ltq_w32(1 << timer, LQ_GPTU_IRNCR);
++
++ /* Call user hanler or signal. */
++ flag = dev_timer->flag;
++ if (!(timer & 0x01)
++ || TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) {
++ /* 16-bit timer or timer A of 32-bit timer */
++ switch (TIMER_FLAG_MASK_HANDLE(flag)) {
++ case TIMER_FLAG_CALLBACK_IN_IRQ:
++ case TIMER_FLAG_CALLBACK_IN_HB:
++ if (dev_timer->arg1)
++ (*(timer_callback)dev_timer->arg1)(dev_timer->arg2);
++ break;
++ case TIMER_FLAG_SIGNAL:
++ send_sig((int)dev_timer->arg2, (struct task_struct *)dev_timer->arg1, 0);
++ break;
++ }
++ }
++ }
++ return IRQ_HANDLED;
++}
++
++static inline void lq_enable_gptu(void)
++{
++ struct clk *clk = clk_get_sys("1e100a00.gptu", NULL);
++ clk_enable(clk);
++
++ //ltq_pmu_enable(PMU_GPT);
++
++ /* Set divider as 1, disable write protection for SPEN, enable module. */
++ *LQ_GPTU_CLC =
++ GPTU_CLC_SMC_SET(0x00) |
++ GPTU_CLC_RMC_SET(0x01) |
++ GPTU_CLC_FSOE_SET(0) |
++ GPTU_CLC_SBWE_SET(1) |
++ GPTU_CLC_EDIS_SET(0) |
++ GPTU_CLC_SPEN_SET(0) |
++ GPTU_CLC_DISR_SET(0);
++}
++
++static inline void lq_disable_gptu(void)
++{
++ struct clk *clk = clk_get_sys("1e100a00.gptu", NULL);
++ ltq_w32(0x00, LQ_GPTU_IRNEN);
++ ltq_w32(0xfff, LQ_GPTU_IRNCR);
++
++ /* Set divider as 0, enable write protection for SPEN, disable module. */
++ *LQ_GPTU_CLC =
++ GPTU_CLC_SMC_SET(0x00) |
++ GPTU_CLC_RMC_SET(0x00) |
++ GPTU_CLC_FSOE_SET(0) |
++ GPTU_CLC_SBWE_SET(0) |
++ GPTU_CLC_EDIS_SET(0) |
++ GPTU_CLC_SPEN_SET(0) |
++ GPTU_CLC_DISR_SET(1);
++
++ clk_enable(clk);
++}
++
++int lq_request_timer(unsigned int timer, unsigned int flag,
++ unsigned long value, unsigned long arg1, unsigned long arg2)
++{
++ int ret = 0;
++ unsigned int con_reg, irnen_reg;
++ int n, X;
++
++ if (timer >= FIRST_TIMER + timer_dev.number_of_timers)
++ return -EINVAL;
++
++ printk(KERN_INFO "request_timer(%d, 0x%08X, %lu)...",
++ timer, flag, value);
++
++ if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT)
++ value &= 0xFFFF;
++ else
++ timer &= ~0x01;
++
++ mutex_lock(&timer_dev.gptu_mutex);
++
++ /*
++ * Allocate timer.
++ */
++ if (timer < FIRST_TIMER) {
++ unsigned int mask;
++ unsigned int shift;
++ /* This takes care of TIMER1B which is the only choice for Voice TAPI system */
++ unsigned int offset = TIMER2A;
++
++ /*
++ * Pick up a free timer.
++ */
++ if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) {
++ mask = 1 << offset;
++ shift = 1;
++ } else {
++ mask = 3 << offset;
++ shift = 2;
++ }
++ for (timer = offset;
++ timer < offset + timer_dev.number_of_timers;
++ timer += shift, mask <<= shift)
++ if (!(timer_dev.occupation & mask)) {
++ timer_dev.occupation |= mask;
++ break;
++ }
++ if (timer >= offset + timer_dev.number_of_timers) {
++ printk("failed![%d]\n", __LINE__);
++ mutex_unlock(&timer_dev.gptu_mutex);
++ return -EINVAL;
++ } else
++ ret = timer;
++ } else {
++ register unsigned int mask;
++
++ /*
++ * Check if the requested timer is free.
++ */
++ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
++ if ((timer_dev.occupation & mask)) {
++ printk("failed![%d] mask %#x, timer_dev.occupation %#x\n",
++ __LINE__, mask, timer_dev.occupation);
++ mutex_unlock(&timer_dev.gptu_mutex);
++ return -EBUSY;
++ } else {
++ timer_dev.occupation |= mask;
++ ret = 0;
++ }
++ }
++
++ /*
++ * Prepare control register value.
++ */
++ switch (TIMER_FLAG_MASK_EDGE(flag)) {
++ default:
++ case TIMER_FLAG_NONE_EDGE:
++ con_reg = GPTU_CON_EDGE_SET(0x00);
++ break;
++ case TIMER_FLAG_RISE_EDGE:
++ con_reg = GPTU_CON_EDGE_SET(0x01);
++ break;
++ case TIMER_FLAG_FALL_EDGE:
++ con_reg = GPTU_CON_EDGE_SET(0x02);
++ break;
++ case TIMER_FLAG_ANY_EDGE:
++ con_reg = GPTU_CON_EDGE_SET(0x03);
++ break;
++ }
++ if (TIMER_FLAG_MASK_TYPE(flag) == TIMER_FLAG_TIMER)
++ con_reg |=
++ TIMER_FLAG_MASK_SRC(flag) ==
++ TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) :
++ GPTU_CON_SRC_EXT_SET(0);
++ else
++ con_reg |=
++ TIMER_FLAG_MASK_SRC(flag) ==
++ TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) :
++ GPTU_CON_SRC_EG_SET(0);
++ con_reg |=
++ TIMER_FLAG_MASK_SYNC(flag) ==
++ TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) :
++ GPTU_CON_SYNC_SET(1);
++ con_reg |=
++ TIMER_FLAG_MASK_INVERT(flag) ==
++ TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1);
++ con_reg |=
++ TIMER_FLAG_MASK_SIZE(flag) ==
++ TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) :
++ GPTU_CON_EXT_SET(1);
++ con_reg |=
++ TIMER_FLAG_MASK_STOP(flag) ==
++ TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0);
++ con_reg |=
++ TIMER_FLAG_MASK_TYPE(flag) ==
++ TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) :
++ GPTU_CON_CNT_SET(1);
++ con_reg |=
++ TIMER_FLAG_MASK_DIR(flag) ==
++ TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0);
++
++ /*
++ * Fill up running data.
++ */
++ timer_dev.timer[timer - FIRST_TIMER].flag = flag;
++ timer_dev.timer[timer - FIRST_TIMER].arg1 = arg1;
++ timer_dev.timer[timer - FIRST_TIMER].arg2 = arg2;
++ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
++ timer_dev.timer[timer - FIRST_TIMER + 1].flag = flag;
++
++ /*
++ * Enable GPTU module.
++ */
++ if (!timer_dev.f_gptu_on) {
++ lq_enable_gptu();
++ timer_dev.f_gptu_on = 1;
++ }
++
++ /*
++ * Enable IRQ.
++ */
++ if (TIMER_FLAG_MASK_HANDLE(flag) != TIMER_FLAG_NO_HANDLE) {
++ if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL)
++ timer_dev.timer[timer - FIRST_TIMER].arg1 =
++ (unsigned long) find_task_by_vpid((int) arg1);
++
++ irnen_reg = 1 << (timer - FIRST_TIMER);
++
++ if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL
++ || (TIMER_FLAG_MASK_HANDLE(flag) ==
++ TIMER_FLAG_CALLBACK_IN_IRQ
++ && timer_dev.timer[timer - FIRST_TIMER].arg1)) {
++ enable_irq(timer_dev.timer[timer - FIRST_TIMER].irq);
++ timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 1;
++ }
++ } else
++ irnen_reg = 0;
++
++ /*
++ * Write config register, reload value and enable interrupt.
++ */
++ n = timer >> 1;
++ X = timer & 0x01;
++ *LQ_GPTU_CON(n, X) = con_reg;
++ *LQ_GPTU_RELOAD(n, X) = value;
++ /* printk("reload value = %d\n", (u32)value); */
++ *LQ_GPTU_IRNEN |= irnen_reg;
++
++ mutex_unlock(&timer_dev.gptu_mutex);
++ printk("successful!\n");
++ return ret;
++}
++EXPORT_SYMBOL(lq_request_timer);
++
++int lq_free_timer(unsigned int timer)
++{
++ unsigned int flag;
++ unsigned int mask;
++ int n, X;
++
++ if (!timer_dev.f_gptu_on)
++ return -EINVAL;
++
++ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
++ return -EINVAL;
++
++ mutex_lock(&timer_dev.gptu_mutex);
++
++ flag = timer_dev.timer[timer - FIRST_TIMER].flag;
++ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
++ timer &= ~0x01;
++
++ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
++ if (((timer_dev.occupation & mask) ^ mask)) {
++ mutex_unlock(&timer_dev.gptu_mutex);
++ return -EINVAL;
++ }
++
++ n = timer >> 1;
++ X = timer & 0x01;
++
++ if (GPTU_CON_EN(n, X))
++ *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1);
++
++ *LQ_GPTU_IRNEN &= ~GPTU_IRNEN_TC_SET(n, X, 1);
++ *LQ_GPTU_IRNCR |= GPTU_IRNCR_TC_SET(n, X, 1);
++
++ if (timer_dev.timer[timer - FIRST_TIMER].f_irq_on) {
++ disable_irq(timer_dev.timer[timer - FIRST_TIMER].irq);
++ timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 0;
++ }
++
++ timer_dev.occupation &= ~mask;
++ if (!timer_dev.occupation && timer_dev.f_gptu_on) {
++ lq_disable_gptu();
++ timer_dev.f_gptu_on = 0;
++ }
++
++ mutex_unlock(&timer_dev.gptu_mutex);
++
++ return 0;
++}
++EXPORT_SYMBOL(lq_free_timer);
++
++int lq_start_timer(unsigned int timer, int is_resume)
++{
++ unsigned int flag;
++ unsigned int mask;
++ int n, X;
++
++ if (!timer_dev.f_gptu_on)
++ return -EINVAL;
++
++ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
++ return -EINVAL;
++
++ mutex_lock(&timer_dev.gptu_mutex);
++
++ flag = timer_dev.timer[timer - FIRST_TIMER].flag;
++ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
++ timer &= ~0x01;
++
++ mask = (TIMER_FLAG_MASK_SIZE(flag) ==
++ TIMER_FLAG_16BIT ? 1 : 3) << timer;
++ if (((timer_dev.occupation & mask) ^ mask)) {
++ mutex_unlock(&timer_dev.gptu_mutex);
++ return -EINVAL;
++ }
++
++ n = timer >> 1;
++ X = timer & 0x01;
++
++ *LQ_GPTU_RUN(n, X) = GPTU_RUN_RL_SET(!is_resume) | GPTU_RUN_SEN_SET(1);
++
++
++ mutex_unlock(&timer_dev.gptu_mutex);
++
++ return 0;
++}
++EXPORT_SYMBOL(lq_start_timer);
++
++int lq_stop_timer(unsigned int timer)
++{
++ unsigned int flag;
++ unsigned int mask;
++ int n, X;
++
++ if (!timer_dev.f_gptu_on)
++ return -EINVAL;
++
++ if (timer < FIRST_TIMER
++ || timer >= FIRST_TIMER + timer_dev.number_of_timers)
++ return -EINVAL;
++
++ mutex_lock(&timer_dev.gptu_mutex);
++
++ flag = timer_dev.timer[timer - FIRST_TIMER].flag;
++ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
++ timer &= ~0x01;
++
++ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
++ if (((timer_dev.occupation & mask) ^ mask)) {
++ mutex_unlock(&timer_dev.gptu_mutex);
++ return -EINVAL;
++ }
++
++ n = timer >> 1;
++ X = timer & 0x01;
++
++ *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1);
++
++ mutex_unlock(&timer_dev.gptu_mutex);
++
++ return 0;
++}
++EXPORT_SYMBOL(lq_stop_timer);
++
++int lq_reset_counter_flags(u32 timer, u32 flags)
++{
++ unsigned int oflag;
++ unsigned int mask, con_reg;
++ int n, X;
++
++ if (!timer_dev.f_gptu_on)
++ return -EINVAL;
++
++ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
++ return -EINVAL;
++
++ mutex_lock(&timer_dev.gptu_mutex);
++
++ oflag = timer_dev.timer[timer - FIRST_TIMER].flag;
++ if (TIMER_FLAG_MASK_SIZE(oflag) != TIMER_FLAG_16BIT)
++ timer &= ~0x01;
++
++ mask = (TIMER_FLAG_MASK_SIZE(oflag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
++ if (((timer_dev.occupation & mask) ^ mask)) {
++ mutex_unlock(&timer_dev.gptu_mutex);
++ return -EINVAL;
++ }
++
++ switch (TIMER_FLAG_MASK_EDGE(flags)) {
++ default:
++ case TIMER_FLAG_NONE_EDGE:
++ con_reg = GPTU_CON_EDGE_SET(0x00);
++ break;
++ case TIMER_FLAG_RISE_EDGE:
++ con_reg = GPTU_CON_EDGE_SET(0x01);
++ break;
++ case TIMER_FLAG_FALL_EDGE:
++ con_reg = GPTU_CON_EDGE_SET(0x02);
++ break;
++ case TIMER_FLAG_ANY_EDGE:
++ con_reg = GPTU_CON_EDGE_SET(0x03);
++ break;
++ }
++ if (TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER)
++ con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : GPTU_CON_SRC_EXT_SET(0);
++ else
++ con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : GPTU_CON_SRC_EG_SET(0);
++ con_reg |= TIMER_FLAG_MASK_SYNC(flags) == TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : GPTU_CON_SYNC_SET(1);
++ con_reg |= TIMER_FLAG_MASK_INVERT(flags) == TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1);
++ con_reg |= TIMER_FLAG_MASK_SIZE(flags) == TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : GPTU_CON_EXT_SET(1);
++ con_reg |= TIMER_FLAG_MASK_STOP(flags) == TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0);
++ con_reg |= TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : GPTU_CON_CNT_SET(1);
++ con_reg |= TIMER_FLAG_MASK_DIR(flags) == TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0);
++
++ timer_dev.timer[timer - FIRST_TIMER].flag = flags;
++ if (TIMER_FLAG_MASK_SIZE(flags) != TIMER_FLAG_16BIT)
++ timer_dev.timer[timer - FIRST_TIMER + 1].flag = flags;
++
++ n = timer >> 1;
++ X = timer & 0x01;
++
++ *LQ_GPTU_CON(n, X) = con_reg;
++ smp_wmb();
++ mutex_unlock(&timer_dev.gptu_mutex);
++ return 0;
++}
++EXPORT_SYMBOL(lq_reset_counter_flags);
++
++int lq_get_count_value(unsigned int timer, unsigned long *value)
++{
++ unsigned int flag;
++ unsigned int mask;
++ int n, X;
++
++ if (!timer_dev.f_gptu_on)
++ return -EINVAL;
++
++ if (timer < FIRST_TIMER
++ || timer >= FIRST_TIMER + timer_dev.number_of_timers)
++ return -EINVAL;
++
++ mutex_lock(&timer_dev.gptu_mutex);
++
++ flag = timer_dev.timer[timer - FIRST_TIMER].flag;
++ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
++ timer &= ~0x01;
++
++ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
++ if (((timer_dev.occupation & mask) ^ mask)) {
++ mutex_unlock(&timer_dev.gptu_mutex);
++ return -EINVAL;
++ }
++
++ n = timer >> 1;
++ X = timer & 0x01;
++
++ *value = *LQ_GPTU_COUNT(n, X);
++
++
++ mutex_unlock(&timer_dev.gptu_mutex);
++
++ return 0;
++}
++EXPORT_SYMBOL(lq_get_count_value);
++
++u32 lq_cal_divider(unsigned long freq)
++{
++ u64 module_freq, fpi = ltq_get_fpi_bus_clock(2);
++ u32 clock_divider = 1;
++ module_freq = fpi * 1000;
++ do_div(module_freq, clock_divider * freq);
++ return module_freq;
++}
++EXPORT_SYMBOL(lq_cal_divider);
++
++int lq_set_timer(unsigned int timer, unsigned int freq, int is_cyclic,
++ int is_ext_src, unsigned int handle_flag, unsigned long arg1,
++ unsigned long arg2)
++{
++ unsigned long divider;
++ unsigned int flag;
++
++ divider = lq_cal_divider(freq);
++ if (divider == 0)
++ return -EINVAL;
++ flag = ((divider & ~0xFFFF) ? TIMER_FLAG_32BIT : TIMER_FLAG_16BIT)
++ | (is_cyclic ? TIMER_FLAG_CYCLIC : TIMER_FLAG_ONCE)
++ | (is_ext_src ? TIMER_FLAG_EXT_SRC : TIMER_FLAG_INT_SRC)
++ | TIMER_FLAG_TIMER | TIMER_FLAG_DOWN
++ | TIMER_FLAG_MASK_HANDLE(handle_flag);
++
++ printk(KERN_INFO "lq_set_timer(%d, %d), divider = %lu\n",
++ timer, freq, divider);
++ return lq_request_timer(timer, flag, divider, arg1, arg2);
++}
++EXPORT_SYMBOL(lq_set_timer);
++
++int lq_set_counter(unsigned int timer, unsigned int flag, u32 reload,
++ unsigned long arg1, unsigned long arg2)
++{
++ printk(KERN_INFO "lq_set_counter(%d, %#x, %d)\n", timer, flag, reload);
++ return lq_request_timer(timer, flag, reload, arg1, arg2);
++}
++EXPORT_SYMBOL(lq_set_counter);
++
++static long gptu_ioctl(struct file *file, unsigned int cmd,
++ unsigned long arg)
++{
++ int ret;
++ struct gptu_ioctl_param param;
++
++ if (!access_ok(VERIFY_READ, arg, sizeof(struct gptu_ioctl_param)))
++ return -EFAULT;
++ copy_from_user(&param, (void *) arg, sizeof(param));
++
++ if ((((cmd == GPTU_REQUEST_TIMER || cmd == GPTU_SET_TIMER
++ || GPTU_SET_COUNTER) && param.timer < 2)
++ || cmd == GPTU_GET_COUNT_VALUE || cmd == GPTU_CALCULATE_DIVIDER)
++ && !access_ok(VERIFY_WRITE, arg,
++ sizeof(struct gptu_ioctl_param)))
++ return -EFAULT;
++
++ switch (cmd) {
++ case GPTU_REQUEST_TIMER:
++ ret = lq_request_timer(param.timer, param.flag, param.value,
++ (unsigned long) param.pid,
++ (unsigned long) param.sig);
++ if (ret > 0) {
++ copy_to_user(&((struct gptu_ioctl_param *) arg)->
++ timer, &ret, sizeof(&ret));
++ ret = 0;
++ }
++ break;
++ case GPTU_FREE_TIMER:
++ ret = lq_free_timer(param.timer);
++ break;
++ case GPTU_START_TIMER:
++ ret = lq_start_timer(param.timer, param.flag);
++ break;
++ case GPTU_STOP_TIMER:
++ ret = lq_stop_timer(param.timer);
++ break;
++ case GPTU_GET_COUNT_VALUE:
++ ret = lq_get_count_value(param.timer, &param.value);
++ if (!ret)
++ copy_to_user(&((struct gptu_ioctl_param *) arg)->
++ value, &param.value,
++ sizeof(param.value));
++ break;
++ case GPTU_CALCULATE_DIVIDER:
++ param.value = lq_cal_divider(param.value);
++ if (param.value == 0)
++ ret = -EINVAL;
++ else {
++ copy_to_user(&((struct gptu_ioctl_param *) arg)->
++ value, &param.value,
++ sizeof(param.value));
++ ret = 0;
++ }
++ break;
++ case GPTU_SET_TIMER:
++ ret = lq_set_timer(param.timer, param.value,
++ TIMER_FLAG_MASK_STOP(param.flag) !=
++ TIMER_FLAG_ONCE ? 1 : 0,
++ TIMER_FLAG_MASK_SRC(param.flag) ==
++ TIMER_FLAG_EXT_SRC ? 1 : 0,
++ TIMER_FLAG_MASK_HANDLE(param.flag) ==
++ TIMER_FLAG_SIGNAL ? TIMER_FLAG_SIGNAL :
++ TIMER_FLAG_NO_HANDLE,
++ (unsigned long) param.pid,
++ (unsigned long) param.sig);
++ if (ret > 0) {
++ copy_to_user(&((struct gptu_ioctl_param *) arg)->
++ timer, &ret, sizeof(&ret));
++ ret = 0;
++ }
++ break;
++ case GPTU_SET_COUNTER:
++ lq_set_counter(param.timer, param.flag, param.value, 0, 0);
++ if (ret > 0) {
++ copy_to_user(&((struct gptu_ioctl_param *) arg)->
++ timer, &ret, sizeof(&ret));
++ ret = 0;
++ }
++ break;
++ default:
++ ret = -ENOTTY;
++ }
++
++ return ret;
++}
++
++static int gptu_open(struct inode *inode, struct file *file)
++{
++ return 0;
++}
++
++static int gptu_release(struct inode *inode, struct file *file)
++{
++ return 0;
++}
++
++int __init lq_gptu_init(void)
++{
++ int ret;
++ unsigned int i;
++
++ ltq_w32(0, LQ_GPTU_IRNEN);
++ ltq_w32(0xfff, LQ_GPTU_IRNCR);
++
++ memset(&timer_dev, 0, sizeof(timer_dev));
++ mutex_init(&timer_dev.gptu_mutex);
++
++ lq_enable_gptu();
++ timer_dev.number_of_timers = GPTU_ID_CFG * 2;
++ lq_disable_gptu();
++ if (timer_dev.number_of_timers > MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2)
++ timer_dev.number_of_timers = MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2;
++ printk(KERN_INFO "gptu: totally %d 16-bit timers/counters\n", timer_dev.number_of_timers);
++
++ ret = misc_register(&gptu_miscdev);
++ if (ret) {
++ printk(KERN_ERR "gptu: can't misc_register, get error %d\n", -ret);
++ return ret;
++ } else {
++ printk(KERN_INFO "gptu: misc_register on minor %d\n", gptu_miscdev.minor);
++ }
++
++ for (i = 0; i < timer_dev.number_of_timers; i++) {
++ ret = request_irq(TIMER_INTERRUPT + i, timer_irq_handler, IRQF_TIMER, gptu_miscdev.name, &timer_dev.timer[i]);
++ if (ret) {
++ for (; i >= 0; i--)
++ free_irq(TIMER_INTERRUPT + i, &timer_dev.timer[i]);
++ misc_deregister(&gptu_miscdev);
++ printk(KERN_ERR "gptu: failed in requesting irq (%d), get error %d\n", i, -ret);
++ return ret;
++ } else {
++ timer_dev.timer[i].irq = TIMER_INTERRUPT + i;
++ disable_irq(timer_dev.timer[i].irq);
++ printk(KERN_INFO "gptu: succeeded to request irq %d\n", timer_dev.timer[i].irq);
++ }
++ }
++
++ return 0;
++}
++
++void __exit lq_gptu_exit(void)
++{
++ unsigned int i;
++
++ for (i = 0; i < timer_dev.number_of_timers; i++) {
++ if (timer_dev.timer[i].f_irq_on)
++ disable_irq(timer_dev.timer[i].irq);
++ free_irq(timer_dev.timer[i].irq, &timer_dev.timer[i]);
++ }
++ lq_disable_gptu();
++ misc_deregister(&gptu_miscdev);
++}
++
++module_init(lq_gptu_init);
++module_exit(lq_gptu_exit);
++
++#endif
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0040-owrt-lantiq-add-atm-hack.patch b/target/linux/lantiq/patches-3.8/0040-owrt-lantiq-add-atm-hack.patch
new file mode 100644
index 0000000..b2e4ab0
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0040-owrt-lantiq-add-atm-hack.patch
@@ -0,0 +1,518 @@
+From ae15f50544e6012c998ef59f6c12e334da3c9bff Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 3 Aug 2012 10:27:25 +0200
+Subject: [PATCH 40/40] owrt: lantiq: add atm hack
+
+---
+ arch/mips/include/asm/mach-lantiq/lantiq_atm.h | 196 +++++++++++++++++++++++
+ arch/mips/include/asm/mach-lantiq/lantiq_ptm.h | 203 ++++++++++++++++++++++++
+ arch/mips/lantiq/irq.c | 2 +
+ arch/mips/mm/cache.c | 2 +
+ include/uapi/linux/atm.h | 6 +
+ net/atm/common.c | 6 +
+ net/atm/proc.c | 2 +-
+ 7 files changed, 416 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_atm.h
+ create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_ptm.h
+
+diff --git a/arch/mips/include/asm/mach-lantiq/lantiq_atm.h b/arch/mips/include/asm/mach-lantiq/lantiq_atm.h
+new file mode 100644
+index 0000000..bf045a9
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/lantiq_atm.h
+@@ -0,0 +1,196 @@
++/******************************************************************************
++**
++** FILE NAME : ifx_atm.h
++** PROJECT : UEIP
++** MODULES : ATM
++**
++** DATE : 17 Jun 2009
++** AUTHOR : Xu Liang
++** DESCRIPTION : Global ATM driver header file
++** COPYRIGHT : Copyright (c) 2006
++** Infineon Technologies AG
++** Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++** This program is free software; you can redistribute it and/or modify
++** it under the terms of the GNU General Public License as published by
++** the Free Software Foundation; either version 2 of the License, or
++** (at your option) any later version.
++**
++** HISTORY
++** $Date $Author $Comment
++** 07 JUL 2009 Xu Liang Init Version
++*******************************************************************************/
++
++#ifndef IFX_ATM_H
++#define IFX_ATM_H
++
++
++
++/*!
++ \defgroup IFX_ATM UEIP Project - ATM driver module
++ \brief UEIP Project - ATM driver module, support Danube, Amazon-SE, AR9, VR9.
++ */
++
++/*!
++ \defgroup IFX_ATM_IOCTL IOCTL Commands
++ \ingroup IFX_ATM
++ \brief IOCTL Commands used by user application.
++ */
++
++/*!
++ \defgroup IFX_ATM_STRUCT Structures
++ \ingroup IFX_ATM
++ \brief Structures used by user application.
++ */
++
++/*!
++ \file ifx_atm.h
++ \ingroup IFX_ATM
++ \brief ATM driver header file
++ */
++
++
++
++/*
++ * ####################################
++ * Definition
++ * ####################################
++ */
++
++/*!
++ \addtogroup IFX_ATM_STRUCT
++ */
++/*@{*/
++
++/*
++ * ATM MIB
++ */
++
++/*!
++ \struct atm_cell_ifEntry_t
++ \brief Structure used for Cell Level MIB Counters.
++
++ User application use this structure to call IOCTL command "PPE_ATM_MIB_CELL".
++ */
++typedef struct {
++ __u32 ifHCInOctets_h; /*!< byte counter of ingress cells (upper 32 bits, total 64 bits) */
++ __u32 ifHCInOctets_l; /*!< byte counter of ingress cells (lower 32 bits, total 64 bits) */
++ __u32 ifHCOutOctets_h; /*!< byte counter of egress cells (upper 32 bits, total 64 bits) */
++ __u32 ifHCOutOctets_l; /*!< byte counter of egress cells (lower 32 bits, total 64 bits) */
++ __u32 ifInErrors; /*!< counter of error ingress cells */
++ __u32 ifInUnknownProtos; /*!< counter of unknown ingress cells */
++ __u32 ifOutErrors; /*!< counter of error egress cells */
++} atm_cell_ifEntry_t;
++
++/*!
++ \struct atm_aal5_ifEntry_t
++ \brief Structure used for AAL5 Frame Level MIB Counters.
++
++ User application use this structure to call IOCTL command "PPE_ATM_MIB_AAL5".
++ */
++typedef struct {
++ __u32 ifHCInOctets_h; /*!< byte counter of ingress packets (upper 32 bits, total 64 bits) */
++ __u32 ifHCInOctets_l; /*!< byte counter of ingress packets (lower 32 bits, total 64 bits) */
++ __u32 ifHCOutOctets_h; /*!< byte counter of egress packets (upper 32 bits, total 64 bits) */
++ __u32 ifHCOutOctets_l; /*!< byte counter of egress packets (lower 32 bits, total 64 bits) */
++ __u32 ifInUcastPkts; /*!< counter of ingress packets */
++ __u32 ifOutUcastPkts; /*!< counter of egress packets */
++ __u32 ifInErrors; /*!< counter of error ingress packets */
++ __u32 ifInDiscards; /*!< counter of dropped ingress packets */
++ __u32 ifOutErros; /*!< counter of error egress packets */
++ __u32 ifOutDiscards; /*!< counter of dropped egress packets */
++} atm_aal5_ifEntry_t;
++
++/*!
++ \struct atm_aal5_vcc_t
++ \brief Structure used for per PVC AAL5 Frame Level MIB Counters.
++
++ This structure is a part of structure "atm_aal5_vcc_x_t".
++ */
++typedef struct {
++ __u32 aal5VccCrcErrors; /*!< counter of ingress packets with CRC error */
++ __u32 aal5VccSarTimeOuts; /*!< counter of ingress packets with Re-assemble timeout */ //no timer support yet
++ __u32 aal5VccOverSizedSDUs; /*!< counter of oversized ingress packets */
++} atm_aal5_vcc_t;
++
++/*!
++ \struct atm_aal5_vcc_x_t
++ \brief Structure used for per PVC AAL5 Frame Level MIB Counters.
++
++ User application use this structure to call IOCTL command "PPE_ATM_MIB_VCC".
++ */
++typedef struct {
++ int vpi; /*!< VPI of the VCC to get MIB counters */
++ int vci; /*!< VCI of the VCC to get MIB counters */
++ atm_aal5_vcc_t mib_vcc; /*!< structure to get MIB counters */
++} atm_aal5_vcc_x_t;
++
++/*@}*/
++
++
++
++/*
++ * ####################################
++ * IOCTL
++ * ####################################
++ */
++
++/*!
++ \addtogroup IFX_ATM_IOCTL
++ */
++/*@{*/
++
++/*
++ * ioctl Command
++ */
++/*!
++ \brief ATM IOCTL Magic Number
++ */
++#define PPE_ATM_IOC_MAGIC 'o'
++/*!
++ \brief ATM IOCTL Command - Get Cell Level MIB Counters
++
++ This command is obsolete. User can get cell level MIB from DSL API.
++ This command uses structure "atm_cell_ifEntry_t" as parameter for output of MIB counters.
++ */
++#define PPE_ATM_MIB_CELL _IOW(PPE_ATM_IOC_MAGIC, 0, atm_cell_ifEntry_t)
++/*!
++ \brief ATM IOCTL Command - Get AAL5 Level MIB Counters
++
++ Get AAL5 packet counters.
++ This command uses structure "atm_aal5_ifEntry_t" as parameter for output of MIB counters.
++ */
++#define PPE_ATM_MIB_AAL5 _IOW(PPE_ATM_IOC_MAGIC, 1, atm_aal5_ifEntry_t)
++/*!
++ \brief ATM IOCTL Command - Get Per PVC MIB Counters
++
++ Get AAL5 packet counters for each PVC.
++ This command uses structure "atm_aal5_vcc_x_t" as parameter for input of VPI/VCI information and output of MIB counters.
++ */
++#define PPE_ATM_MIB_VCC _IOWR(PPE_ATM_IOC_MAGIC, 2, atm_aal5_vcc_x_t)
++/*!
++ \brief Total Number of ATM IOCTL Commands
++ */
++#define PPE_ATM_IOC_MAXNR 3
++
++/*@}*/
++
++
++
++/*
++ * ####################################
++ * API
++ * ####################################
++ */
++
++#ifdef __KERNEL__
++struct port_cell_info {
++ unsigned int port_num;
++ unsigned int tx_link_rate[2];
++};
++#endif
++
++
++
++#endif // IFX_ATM_H
++
+diff --git a/arch/mips/include/asm/mach-lantiq/lantiq_ptm.h b/arch/mips/include/asm/mach-lantiq/lantiq_ptm.h
+new file mode 100644
+index 0000000..698e5c3
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/lantiq_ptm.h
+@@ -0,0 +1,203 @@
++/******************************************************************************
++**
++** FILE NAME : ifx_ptm.h
++** PROJECT : UEIP
++** MODULES : PTM
++**
++** DATE : 17 Jun 2009
++** AUTHOR : Xu Liang
++** DESCRIPTION : Global PTM driver header file
++** COPYRIGHT : Copyright (c) 2006
++** Infineon Technologies AG
++** Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++** This program is free software; you can redistribute it and/or modify
++** it under the terms of the GNU General Public License as published by
++** the Free Software Foundation; either version 2 of the License, or
++** (at your option) any later version.
++**
++** HISTORY
++** $Date $Author $Comment
++** 07 JUL 2009 Xu Liang Init Version
++*******************************************************************************/
++
++#ifndef IFX_PTM_H
++#define IFX_PTM_H
++
++
++
++/*!
++ \defgroup IFX_PTM UEIP Project - PTM driver module
++ \brief UEIP Project - PTM driver module, support Danube, Amazon-SE, AR9, VR9.
++ */
++
++/*!
++ \defgroup IFX_PTM_IOCTL IOCTL Commands
++ \ingroup IFX_PTM
++ \brief IOCTL Commands used by user application.
++ */
++
++/*!
++ \defgroup IFX_PTM_STRUCT Structures
++ \ingroup IFX_PTM
++ \brief Structures used by user application.
++ */
++
++/*!
++ \file ifx_ptm.h
++ \ingroup IFX_PTM
++ \brief PTM driver header file
++ */
++
++
++
++/*
++ * ####################################
++ * Definition
++ * ####################################
++ */
++
++
++
++/*
++ * ####################################
++ * IOCTL
++ * ####################################
++ */
++
++/*!
++ \addtogroup IFX_PTM_IOCTL
++ */
++/*@{*/
++
++/*
++ * ioctl Command
++ */
++/*!
++ \brief PTM IOCTL Command - Get codeword MIB counters.
++
++ This command uses structure "PTM_CW_IF_ENTRY_T" to get codeword level MIB counters.
++ */
++#define IFX_PTM_MIB_CW_GET SIOCDEVPRIVATE + 1
++/*!
++ \brief PTM IOCTL Command - Get packet MIB counters.
++
++ This command uses structure "PTM_FRAME_MIB_T" to get packet level MIB counters.
++ */
++#define IFX_PTM_MIB_FRAME_GET SIOCDEVPRIVATE + 2
++/*!
++ \brief PTM IOCTL Command - Get firmware configuration (CRC).
++
++ This command uses structure "IFX_PTM_CFG_T" to get firmware configuration (CRC).
++ */
++#define IFX_PTM_CFG_GET SIOCDEVPRIVATE + 3
++/*!
++ \brief PTM IOCTL Command - Set firmware configuration (CRC).
++
++ This command uses structure "IFX_PTM_CFG_T" to set firmware configuration (CRC).
++ */
++#define IFX_PTM_CFG_SET SIOCDEVPRIVATE + 4
++/*!
++ \brief PTM IOCTL Command - Program priority value to TX queue mapping.
++
++ This command uses structure "IFX_PTM_PRIO_Q_MAP_T" to program priority value to TX queue mapping.
++ */
++#define IFX_PTM_MAP_PKT_PRIO_TO_Q SIOCDEVPRIVATE + 14
++
++/*@}*/
++
++
++/*!
++ \addtogroup IFX_PTM_STRUCT
++ */
++/*@{*/
++
++/*
++ * ioctl Data Type
++ */
++
++/*!
++ \typedef PTM_CW_IF_ENTRY_T
++ \brief Wrapping of structure "ptm_cw_ifEntry_t".
++ */
++/*!
++ \struct ptm_cw_ifEntry_t
++ \brief Structure used for CodeWord level MIB counters.
++ */
++typedef struct ptm_cw_ifEntry_t {
++ uint32_t ifRxNoIdleCodewords; /*!< output, number of ingress user codeword */
++ uint32_t ifRxIdleCodewords; /*!< output, number of ingress idle codeword */
++ uint32_t ifRxCodingViolation; /*!< output, number of error ingress codeword */
++ uint32_t ifTxNoIdleCodewords; /*!< output, number of egress user codeword */
++ uint32_t ifTxIdleCodewords; /*!< output, number of egress idle codeword */
++} PTM_CW_IF_ENTRY_T;
++
++/*!
++ \typedef PTM_FRAME_MIB_T
++ \brief Wrapping of structure "ptm_frame_mib_t".
++ */
++/*!
++ \struct ptm_frame_mib_t
++ \brief Structure used for packet level MIB counters.
++ */
++typedef struct ptm_frame_mib_t {
++ uint32_t RxCorrect; /*!< output, number of ingress packet */
++ uint32_t TC_CrcError; /*!< output, number of egress packet with CRC error */
++ uint32_t RxDropped; /*!< output, number of dropped ingress packet */
++ uint32_t TxSend; /*!< output, number of egress packet */
++} PTM_FRAME_MIB_T;
++
++/*!
++ \typedef IFX_PTM_CFG_T
++ \brief Wrapping of structure "ptm_cfg_t".
++ */
++/*!
++ \struct ptm_cfg_t
++ \brief Structure used for ETH/TC CRC configuration.
++ */
++typedef struct ptm_cfg_t {
++ uint32_t RxEthCrcPresent; /*!< input/output, ingress packet has ETH CRC */
++ uint32_t RxEthCrcCheck; /*!< input/output, check ETH CRC of ingress packet */
++ uint32_t RxTcCrcCheck; /*!< input/output, check TC CRC of ingress codeword */
++ uint32_t RxTcCrcLen; /*!< input/output, length of TC CRC of ingress codeword */
++ uint32_t TxEthCrcGen; /*!< input/output, generate ETH CRC for egress packet */
++ uint32_t TxTcCrcGen; /*!< input/output, generate TC CRC for egress codeword */
++ uint32_t TxTcCrcLen; /*!< input/output, length of TC CRC of egress codeword */
++} IFX_PTM_CFG_T;
++
++/*!
++ \typedef IFX_PTM_PRIO_Q_MAP_T
++ \brief Wrapping of structure "ppe_prio_q_map".
++ */
++/*!
++ \struct ppe_prio_q_map
++ \brief Structure used for Priority Value to TX Queue mapping.
++ */
++typedef struct ppe_prio_q_map {
++ int pkt_prio;
++ int qid;
++ int vpi; // ignored in eth interface
++ int vci; // ignored in eth interface
++} IFX_PTM_PRIO_Q_MAP_T;
++
++/*@}*/
++
++
++
++/*
++ * ####################################
++ * API
++ * ####################################
++ */
++
++#ifdef __KERNEL__
++struct port_cell_info {
++ unsigned int port_num;
++ unsigned int tx_link_rate[2];
++};
++#endif
++
++
++
++#endif // IFX_PTM_H
++
+diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
+index 5119487..6d2c486 100644
+--- a/arch/mips/lantiq/irq.c
++++ b/arch/mips/lantiq/irq.c
+@@ -14,6 +14,7 @@
+ #include <linux/of_platform.h>
+ #include <linux/of_address.h>
+ #include <linux/of_irq.h>
++#include <linux/module.h>
+
+ #include <asm/bootinfo.h>
+ #include <asm/irq_cpu.h>
+@@ -99,6 +100,7 @@ void ltq_mask_and_ack_irq(struct irq_data *d)
+ ltq_icu_w32(im, ltq_icu_r32(im, ier) & ~BIT(offset), ier);
+ ltq_icu_w32(im, BIT(offset), isr);
+ }
++EXPORT_SYMBOL(ltq_mask_and_ack_irq);
+
+ static void ltq_ack_irq(struct irq_data *d)
+ {
+diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
+index 07cec44..a3e3872 100644
+--- a/arch/mips/mm/cache.c
++++ b/arch/mips/mm/cache.c
+@@ -57,6 +57,8 @@ void (*_dma_cache_wback)(unsigned long start, unsigned long size);
+ void (*_dma_cache_inv)(unsigned long start, unsigned long size);
+
+ EXPORT_SYMBOL(_dma_cache_wback_inv);
++EXPORT_SYMBOL(_dma_cache_wback);
++EXPORT_SYMBOL(_dma_cache_inv);
+
+ #endif /* CONFIG_DMA_NONCOHERENT */
+
+diff --git a/include/uapi/linux/atm.h b/include/uapi/linux/atm.h
+index 88399db..78c8bbc 100644
+--- a/include/uapi/linux/atm.h
++++ b/include/uapi/linux/atm.h
+@@ -130,8 +130,14 @@
+ #define ATM_ABR 4
+ #define ATM_ANYCLASS 5 /* compatible with everything */
+
++#define ATM_VBR_NRT ATM_VBR
++#define ATM_VBR_RT 6
++#define ATM_UBR_PLUS 7
++#define ATM_GFR 8
++
+ #define ATM_MAX_PCR -1 /* maximum available PCR */
+
++
+ struct atm_trafprm {
+ unsigned char traffic_class; /* traffic class (ATM_UBR, ...) */
+ int max_pcr; /* maximum PCR in cells per second */
+diff --git a/net/atm/common.c b/net/atm/common.c
+index 806fc0a..82bc78e 100644
+--- a/net/atm/common.c
++++ b/net/atm/common.c
+@@ -62,11 +62,17 @@ static void vcc_remove_socket(struct sock *sk)
+ write_unlock_irq(&vcc_sklist_lock);
+ }
+
++struct sk_buff* (*ifx_atm_alloc_tx)(struct atm_vcc *, unsigned int) = NULL;
++EXPORT_SYMBOL(ifx_atm_alloc_tx);
++
+ static struct sk_buff *alloc_tx(struct atm_vcc *vcc, unsigned int size)
+ {
+ struct sk_buff *skb;
+ struct sock *sk = sk_atm(vcc);
+
++ if (ifx_atm_alloc_tx != NULL)
++ return ifx_atm_alloc_tx(vcc, size);
++
+ if (sk_wmem_alloc_get(sk) && !atm_may_send(vcc, size)) {
+ pr_debug("Sorry: wmem_alloc = %d, size = %d, sndbuf = %d\n",
+ sk_wmem_alloc_get(sk), size, sk->sk_sndbuf);
+diff --git a/net/atm/proc.c b/net/atm/proc.c
+index 0d020de..9fdb539 100644
+--- a/net/atm/proc.c
++++ b/net/atm/proc.c
+@@ -154,7 +154,7 @@ static void *vcc_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+ static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc)
+ {
+ static const char *const class_name[] = {
+- "off", "UBR", "CBR", "VBR", "ABR"};
++ "off","UBR","CBR","NTR-VBR","ABR","ANY","RT-VBR","UBR+","GFR"};
+ static const char *const aal_name[] = {
+ "---", "1", "2", "3/4", /* 0- 3 */
+ "???", "5", "???", "???", /* 4- 7 */
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0041-owrt-mtd-split.patch b/target/linux/lantiq/patches-3.8/0041-owrt-mtd-split.patch
new file mode 100644
index 0000000..ee5fa73
--- /dev/null
+++ b/target/linux/lantiq/patches-3.8/0041-owrt-mtd-split.patch
@@ -0,0 +1,221 @@
+From 2a295753a10823a47542c779a25bbb1f52c71281 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 3 Aug 2012 10:27:13 +0200
+Subject: [PATCH 19/25] owrt mtd split
+
+---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 1 +
+ arch/mips/lantiq/setup.c | 7 +
+ drivers/mtd/Kconfig | 4 +
+ drivers/mtd/mtdpart.c | 173 +++++++++++++++++++-
+ 4 files changed, 184 insertions(+), 1 deletions(-)
+
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -31,6 +31,10 @@ config MTD_ROOTFS_SPLIT
+ bool "Automatically split 'rootfs' partition for squashfs"
+ default y
+
++config MTD_UIMAGE_SPLIT
++ bool "Automatically split 'linux' partition into 'kernel' and 'rootfs'"
++ default y
++
+ config MTD_REDBOOT_PARTS
+ tristate "RedBoot partition table parsing"
+ ---help---
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -844,6 +844,168 @@ static int refresh_rootfs_split(struct m
+ }
+ #endif /* CONFIG_MTD_ROOTFS_SPLIT */
+
++#ifdef CONFIG_MTD_UIMAGE_SPLIT
++static unsigned long find_uimage_size(struct mtd_info *mtd,
++ unsigned long offset)
++{
++#define UBOOT_MAGIC 0x56190527
++ unsigned long magic = 0;
++ unsigned long temp;
++ size_t len;
++ int ret;
++
++ ret = mtd_read(mtd, offset, 4, &len, (void *)&magic);
++ if (ret || len != sizeof(magic))
++ return 0;
++
++ if (le32_to_cpu(magic) != UBOOT_MAGIC)
++ return 0;
++
++ ret = mtd_read(mtd, offset + 12, 4, &len, (void *)&temp);
++ if (ret || len != sizeof(temp))
++ return 0;
++
++ return temp + 0x40;
++}
++
++static unsigned long find_eva_size(struct mtd_info *mtd,
++ unsigned long offset)
++{
++#define EVA_MAGIC 0xfeed1281
++ unsigned long magic = 0;
++ unsigned long temp;
++ size_t len;
++ int ret;
++
++ ret = mtd_read(mtd, offset, 4, &len, (void *)&magic);
++ if (ret || len != sizeof(magic))
++ return 0;
++
++ if (le32_to_cpu(magic) != EVA_MAGIC)
++ return 0;
++
++ ret = mtd_read(mtd, offset + 4, 4, &len, (void *)&temp);
++ if (ret || len != sizeof(temp))
++ return 0;
++
++ /* add eva header size */
++ temp = le32_to_cpu(temp) + 0x18;
++
++ temp &= ~0xffff;
++ temp += 0x10000;
++ return temp;
++}
++
++static int detect_squashfs_partition(struct mtd_info *mtd, unsigned long offset)
++{
++ unsigned long temp;
++ size_t len;
++ int ret;
++
++ ret = mtd_read(mtd, offset, 4, &len, (void *)&temp);
++ if (ret || len != sizeof(temp))
++ return 0;
++
++
++ return le32_to_cpu(temp) == SQUASHFS_MAGIC;
++}
++
++static int detect_eva_squashfs_partition(struct mtd_info *mtd, unsigned long offset)
++{
++ unsigned long temp;
++ size_t len;
++ int ret;
++
++ ret = mtd_read(mtd, offset, 4, &len, (void *)&temp);
++ if (ret || len != sizeof(temp))
++ return 0;
++
++ return be32_to_cpu(temp) == SQUASHFS_MAGIC;
++}
++
++static unsigned long find_brnimage_size(struct mtd_info *mtd,
++ unsigned long offset)
++{
++ unsigned long buf[4];
++ // Assume at most 2MB of kernel image
++ unsigned long end = offset + (2 << 20);
++ unsigned long ptr = offset + 0x400 - 12;
++ size_t len;
++ int ret;
++
++ while (ptr < end) {
++ long size_min = ptr - 0x400 - 12 - offset;
++ long size_max = ptr + 12 - offset;
++ ret = mtd_read(mtd, ptr, 16, &len, (void *)buf);
++ if (ret || len != 16)
++ return 0;
++
++ if (le32_to_cpu(buf[0]) < size_min ||
++ le32_to_cpu(buf[0]) > size_max) {
++ ptr += 0x400;
++ continue;
++ }
++
++ if (le32_to_cpu(buf[3]) == SQUASHFS_MAGIC)
++ return ptr + 12 - offset;
++
++ ptr += 0x400;
++ }
++
++ return 0;
++}
++
++static int split_uimage(struct mtd_info *mtd,
++ const struct mtd_partition *part)
++{
++ static struct mtd_partition split_partitions[] = {
++ {
++ .name = "kernel",
++ .offset = 0x0,
++ .size = 0x0,
++ }, {
++ .name = "rootfs",
++ .offset = 0x0,
++ .size = 0x0,
++ },
++ };
++
++ split_partitions[0].size = find_uimage_size(mtd, part->offset);
++ if (!split_partitions[0].size) {
++ split_partitions[0].size = find_eva_size(mtd, part->offset);
++ if (!split_partitions[0].size) {
++ split_partitions[0].size = find_brnimage_size(mtd, part->offset);
++ if (!split_partitions[0].size) {
++ printk(KERN_NOTICE "no uImage or brnImage or eva found in linux partition\n");
++ return -1;
++ }
++ }
++ }
++
++ if (detect_eva_squashfs_partition(mtd,
++ part->offset
++ + split_partitions[0].size)) {
++ split_partitions[0].size += 0x100;
++ pr_info("found eva dummy squashfs behind kernel\n");
++ } else if (!detect_squashfs_partition(mtd,
++ part->offset
++ + split_partitions[0].size)) {
++ split_partitions[0].size &= ~(mtd->erasesize - 1);
++ split_partitions[0].size += mtd->erasesize;
++ } else {
++ pr_info("found squashfs behind kernel\n");
++ }
++
++ split_partitions[0].offset = part->offset;
++ split_partitions[1].offset = part->offset + split_partitions[0].size;
++ split_partitions[1].size = part->size - split_partitions[0].size;
++
++ add_mtd_partitions(mtd, split_partitions, 2);
++
++ return 0;
++}
++#endif
++
+ /*
+ * This function, given a master MTD object and a partition table, creates
+ * and registers slave MTD objects which are bound to the master according to
+@@ -860,7 +1022,7 @@ int add_mtd_partitions(struct mtd_info *
+ struct mtd_part *slave;
+ uint64_t cur_offset = 0;
+ int i;
+-#ifdef CONFIG_MTD_ROOTFS_SPLIT
++#if defined(CONFIG_MTD_ROOTFS_SPLIT) || defined(CONFIG_MTD_UIMAGE_SPLIT)
+ int ret;
+ #endif
+
+@@ -877,6 +1039,15 @@ int add_mtd_partitions(struct mtd_info *
+
+ add_mtd_device(&slave->mtd);
+
++#ifdef CONFIG_MTD_UIMAGE_SPLIT
++ if (!strcmp(parts[i].name, "linux")) {
++ ret = split_uimage(master, &parts[i]);
++
++ if (ret)
++ printk(KERN_WARNING "Can't split linux partition\n");
++ }
++#endif
++
+ if (!strcmp(parts[i].name, "rootfs")) {
+ #ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
+ if (ROOT_DEV == 0) {