diff options
Diffstat (limited to 'tools/firmware-utils')
-rw-r--r-- | tools/firmware-utils/src/mkmylofw.c | 67 | ||||
-rw-r--r-- | tools/firmware-utils/src/myloader.h | 6 |
2 files changed, 47 insertions, 26 deletions
diff --git a/tools/firmware-utils/src/mkmylofw.c b/tools/firmware-utils/src/mkmylofw.c index 7a69f6e..aa0a2e1 100644 --- a/tools/firmware-utils/src/mkmylofw.c +++ b/tools/firmware-utils/src/mkmylofw.c @@ -1,7 +1,5 @@ /* - * $Id$ - * - * Copyright (C) 2006,2007 Gabor Juhos <juhosg at openwrt.org> + * Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -72,15 +70,24 @@ struct cpx_board { uint16_t svid; /* sub vendor id */ uint16_t sdid; /* sub device id */ uint32_t flash_size; /* size of flash */ + uint32_t part_offset; /* offset of the partition_table */ + uint32_t part_size; /* size of the partition_table */ }; -#define BOARD(_vid, _did, _svid, _sdid, _flash, _mod, _name, _desc) { \ - .model = _mod, .name = _name, .desc = _desc, \ +#define BOARD(_vid, _did, _svid, _sdid, _flash, _mod, _name, _desc, _po, _ps) { \ + .model = _mod, .name = _name, .desc = _desc, \ .vid = _vid, .did = _did, .svid = _svid, .sdid = _sdid, \ - .flash_size = (_flash << 20) } + .flash_size = (_flash << 20), \ + .part_offset = _po, .part_size = _ps } + +#define CPX_BOARD(_did, _flash, _mod, _name, _desc, _po, _ps) \ + BOARD(VENID_COMPEX, _did, VENID_COMPEX, _did, _flash, _mod, _name, _desc, _po, _ps) + +#define CPX_BOARD_ADM(_did, _flash, _mod, _name, _desc) \ + CPX_BOARD(_did, _flash, _mod, _name, _desc, 0x10000, 0x10000) -#define CPX_BOARD(_did, _flash, _mod, _name, _desc) \ - BOARD(VENID_COMPEX, _did, VENID_COMPEX, _did, _flash, _mod, _name, _desc) +#define CPX_BOARD_AR71XX(_did, _flash, _mod, _name, _desc) \ + CPX_BOARD(_did, _flash, _mod, _name, _desc, 0x20000, 0x8000) #define ALIGN(x,y) ((x)+((y)-1)) & ~((y)-1) @@ -95,44 +102,48 @@ int verblevel = 0; struct mylo_fw_header fw_header; struct mylo_partition fw_partitions[MYLO_MAX_PARTITIONS]; struct fw_block fw_blocks[MAX_FW_BLOCKS]; +struct cpx_board *board; struct cpx_board boards[] = { - CPX_BOARD(DEVID_COMPEX_NP18A, 4, + CPX_BOARD_ADM(DEVID_COMPEX_NP18A, 4, "NP18A", "Compex NetPassage 18A", "Dualband Wireless A+G Internet Gateway"), - CPX_BOARD(DEVID_COMPEX_NP26G8M, 2, + CPX_BOARD_ADM(DEVID_COMPEX_NP26G8M, 2, "NP26G8M", "Compex NetPassage 26G (8M)", "Wireless-G Broadband Multimedia Gateway"), - CPX_BOARD(DEVID_COMPEX_NP26G16M, 4, + CPX_BOARD_ADM(DEVID_COMPEX_NP26G16M, 4, "NP26G16M", "Compex NetPassage 26G (16M)", "Wireless-G Broadband Multimedia Gateway"), - CPX_BOARD(DEVID_COMPEX_NP27G, 4, + CPX_BOARD_ADM(DEVID_COMPEX_NP27G, 4, "NP27G", "Compex NetPassage 27G", "Wireless-G 54Mbps eXtended Range Router"), - CPX_BOARD(DEVID_COMPEX_NP28G, 4, + CPX_BOARD_ADM(DEVID_COMPEX_NP28G, 4, "NP28G", "Compex NetPassage 28G", "Wireless 108Mbps Super-G XR Multimedia Router with 4 USB Ports"), - CPX_BOARD(DEVID_COMPEX_NP28GHS, 4, + CPX_BOARD_ADM(DEVID_COMPEX_NP28GHS, 4, "NP28GHS", "Compex NetPassage 28G (HotSpot)", "HotSpot Solution"), - CPX_BOARD(DEVID_COMPEX_WP18, 4, + CPX_BOARD_ADM(DEVID_COMPEX_WP18, 4, "WP18", "Compex NetPassage WP18", "Wireless-G 54Mbps A+G Dualband Access Point"), - CPX_BOARD(DEVID_COMPEX_WP54G, 4, + CPX_BOARD_ADM(DEVID_COMPEX_WP54G, 4, "WP54G", "Compex WP54G", "Wireless-G 54Mbps XR Access Point"), - CPX_BOARD(DEVID_COMPEX_WP54Gv1C, 2, + CPX_BOARD_ADM(DEVID_COMPEX_WP54Gv1C, 2, "WP54Gv1C", "Compex WP54G rev.1C", "Wireless-G 54Mbps XR Access Point"), - CPX_BOARD(DEVID_COMPEX_WP54AG, 4, + CPX_BOARD_ADM(DEVID_COMPEX_WP54AG, 4, "WP54AG", "Compex WP54AG", "Wireless-AG 54Mbps XR Access Point"), - CPX_BOARD(DEVID_COMPEX_WPP54G, 4, + CPX_BOARD_ADM(DEVID_COMPEX_WPP54G, 4, "WPP54G", "Compex WPP54G", "Outdoor Access Point"), - CPX_BOARD(DEVID_COMPEX_WPP54AG, 4, + CPX_BOARD_ADM(DEVID_COMPEX_WPP54AG, 4, "WPP54AG", "Compex WPP54AG", "Outdoor Access Point"), + CPX_BOARD_AR71XX(DEVID_COMPEX_WP543, 2, + "WP543", "Compex WP543", + "BareBoard"), {.model = NULL} }; @@ -213,6 +224,7 @@ usage(int status) " a: this is the active partition. The bootloader loads\n" " the firmware from this partition.\n" " h: the partition data have a header.\n" +" l: the partition data uses LZMA compression.\n" " p: the bootloader loads data from this partition to\n" " the RAM before decompress it.\n" " -h show this screen\n" @@ -624,11 +636,10 @@ write_out_blocks(FILE *outfile, uint32_t *crc) * for the partition table */ if (fw_num_partitions > 0) { - desc.type = HOST_TO_LE32(FW_DESC_TYPE_USED); - desc.addr = HOST_TO_LE32(0x10000); + desc.addr = HOST_TO_LE32(board->part_offset); desc.dlen = HOST_TO_LE32(sizeof(struct mylo_partition_table)); - desc.blen = HOST_TO_LE32(0x10000); + desc.blen = HOST_TO_LE32(board->part_size); if (write_out_desc(outfile, &desc, crc) != 0) return -1; @@ -1014,6 +1025,9 @@ parse_opt_partition(char ch, char *arg) case 'p': part->flags |= PARTITION_FLAG_PRELOAD; break; + case 'l': + part->flags |= PARTITION_FLAG_LZMA; + break; case 'h': part->flags |= PARTITION_FLAG_HAVEHDR; break; @@ -1068,8 +1082,6 @@ err_out: int parse_opt_board(char ch, char *arg) { - struct cpx_board *board; - if (required_arg(ch, arg)) { goto err_out; } @@ -1189,6 +1201,11 @@ main(int argc, char *argv[]) goto out; } + if (!board) { + errmsg(0, "no board specified"); + goto out; + } + if (flash_size == 0) { errmsg(0, "no flash size specified"); goto out; diff --git a/tools/firmware-utils/src/myloader.h b/tools/firmware-utils/src/myloader.h index 3c0c602..d01bce9 100644 --- a/tools/firmware-utils/src/myloader.h +++ b/tools/firmware-utils/src/myloader.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2006,2007 Gabor Juhos + * Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -56,6 +56,9 @@ #define DEVID_COMPEX_WPP54AG 0x0550 #define DEVID_COMPEX_WPP54G 0x0555 +/* Devices based on the Atheros AR71xx */ +#define DEVID_COMPEX_WP543 0x0640 + /* Devices based on the IXP422 */ #define DEVID_COMPEX_WP18 0x047E #define DEVID_COMPEX_NP18A 0x0489 @@ -108,6 +111,7 @@ struct mylo_partition { #define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */ #define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM * before decompression */ +#define PARTITION_FLAG_LZMA 0x0100 /* the partition data compressed with LZMA */ #define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */ #define PARTITION_TYPE_FREE 0 |